vwii/patching-ios80.md: Fix link to the Decaffeinator guide

docs/user-guide/aroma/autoboot.md

@@ -0,0 +1,20 @@
+# Aroma {docsify-ignore-all}
+
+## Autobooting Aroma
+
+Currently, every time you want to launch Aroma you will have to launch the Health and Safety information app. If you wish to automatically launch into Aroma on every boot, you can autoboot the Health and Safety Information app.
+
+### Instructions
+
+1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
+1. Press A to launch the `aroma` environment.
+1. Press A to launch the Wii U Menu.
+1. Once you are at the Wii U Menu, launch the PayloadLoader Installer.
+1. Press A to select `Check`.
+1. Select `Boot options`.
+1. You will be asked if you want to switch the boot title. Press A to select `Switch to PayloadLoader`.
+1. When the process has finished, press A to shutdown the console.
+1. The PayloadLoader will now be launched automatically on every boot.
+    - To change the default boot title hold Start (+) on the Gamepad while booting the console.
+    - Navigate the list using the D-Pad to hover on the title you want to autoboot in, then press the Y button to set this to your autoboot title.
+    - Press A to launch the selected title.

docs/user-guide/aroma/browser-exploit.md

@@ -0,0 +1,14 @@
+# Aroma {docsify-ignore-all}
+
+## Browser Exploit
+
+Make sure your Wii U has internet access for this step.
+
+### Instructions
+
+1. Take the SD Card out of your computer and plug it into your Wii U console.
+1. Launch the Internet Browser and navigate to the website `wiiuexploit.xyz`.
+1. Click on `Run Exploit!` and hold the B button until you see a screen that says `Choose a payload:`, this will be necessary for the next steps.
+    - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, reboot the console, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again.
+    - If you see the EnvironmentLoader, you did not hold down B long enough. Try again.
+

docs/user-guide/aroma/installing-payloadloader.md

@@ -0,0 +1,26 @@
+# Aroma {docsify-ignore-all}
+
+## Installing PayloadLoader
+
+Now that you have your NAND backup in case anything goes wrong later, you can install the PayloadLoader on your system.
+
+Installing the PayloadLoader will let you access Aroma just by running the Health and Safety Information app.
+
+!> A factory reset **won't** uninstall the injected PayloadLoader. Follow [uninstall PayloadLoader](../../uninstall-payloadloader) to remove the PayloadLoader. 
+
+### Instructions
+
+?> If you're already booted into Aroma, restart your console before executing the browser exploit again.
+
+1. Take the SD Card out of your PC and plug it into your Wii U.
+1. Execute the web browser exploit as [previously explained](browser-exploit) but this time, you will need to hold the X button to open the Environment Loader menu.
+1. Press A to launch the `aroma` environment.
+1. Press A to launch the Wii U Menu.
+1. At the Wii U Menu, launch the PayloadLoader Installer.
+1. Press the A button to check if you can install the PayloadLoader.
+    - It should now tell you that the PayloadLoader can be installed onto the Health and Safety Information app.
+1. Press the A button to select `Install / Update`.
+1. You'll be asked if you are sure you want to install the PayloadLoader. Use the D-Pad to select `Install` and press A.
+1. After installing has finished, press A to shut down the console.
+
+!> If you do not wish to autoboot Aroma on your console, you can skip the `Autobooting Aroma` part and head directly to [Finalizing Setup](finalizing-setup).

docs/user-guide/aroma/nand-backup.md

@@ -0,0 +1,27 @@
+# Aroma {docsify-ignore-all}
+
+## Making a NAND Backup
+
+In case anything should go wrong in the later process and your Wii U ends up bricked, restoring a previously made NAND backup can fix it.
+
+### Instructions
+
+?> The Wii U NAND is (depending on your model) either 8GB or 32GB. As a result of this, to create a full backup of your console's NAND, your SD Card has to be larger than the size of your NAND. If you do not have a large enough SD Card, you can skip the optional `MLC` section which includes save files and game data and is not needed to recover most types of bricks.
+
+?> Restoring a NAND Backup on the Wii U requires additional hardware and micro soldering skills.
+<br>However, making a NAND Backup is **always** useful, so please do not skip it.
+<br>Your NAND Backup is unique to your system. Backups from other consoles **won't** work.
+
+1. Navigate to `nanddumper` using the GamePad and press A to launch it.
+1. Use the Wii U GamePad's D-Pad to enter the following configuration:
+    - Dump SLC: **yes**
+    - Dump SLCCMPT: **yes**
+    - Dump MLC: **optional**
+    - Dump OTP: **yes**
+    - Dump SEEPROM: **yes**
+1. Press the A button to start the dumping process.
+1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC.
+1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer.
+1. Delete the files from your SD Card to free up space.
+
+?> **If the PayloadLoader is already installed into the Health and Safety Information app and your console is already autobooting it, you do not need to continue following the guide.**