From 5a42ff8b7e735eff8275be153b15d06345588975 Mon Sep 17 00:00:00 2001 From: Elpunical Date: Wed, 18 Dec 2019 17:01:42 +0100 Subject: [PATCH] Remove leftover files --- docs/user-guide/browser-exploit.md | 11 --- docs/user-guide/getting-started.md | 62 ---------------- docs/user-guide/installing-hbc.md | 38 ---------- docs/user-guide/launching-cfw.md | 52 -------------- docs/user-guide/nand-backup.md | 23 ------ docs/user-guide/sd-preparation.md | 110 ----------------------------- 6 files changed, 296 deletions(-) delete mode 100644 docs/user-guide/browser-exploit.md delete mode 100644 docs/user-guide/getting-started.md delete mode 100644 docs/user-guide/installing-hbc.md delete mode 100644 docs/user-guide/launching-cfw.md delete mode 100644 docs/user-guide/nand-backup.md delete mode 100644 docs/user-guide/sd-preparation.md diff --git a/docs/user-guide/browser-exploit.md b/docs/user-guide/browser-exploit.md deleted file mode 100644 index 60a7a6c2e..000000000 --- a/docs/user-guide/browser-exploit.md +++ /dev/null @@ -1,11 +0,0 @@ -# Browser Exploit - -To install CFW, we first need to launch the Homebrew Launcher through the browser exploit. -Make sure your Wii U has internet access for this step. - -### Instructions - -> 1. Take the SD Card out of your Computer and plug it into your Wii U console. -> 1. Launch the internet browser and open `wiiuexploit.xyz`. -> 1. Click on `Run Homebrew Launcher!`. Your console should launch the Homebrew Launcher. -> - If your Wii U gets stuck on a white or otherwise frozen screen, wait a few seconds. If nothing happens, [reset the browser's save data](https://en-americas-support.nintendo.com/app/answers/detail/a_id/1507/~/how-to-delete-the-internet-browser-history) and try again. diff --git a/docs/user-guide/getting-started.md b/docs/user-guide/getting-started.md deleted file mode 100644 index 5c67fc754..000000000 --- a/docs/user-guide/getting-started.md +++ /dev/null @@ -1,62 +0,0 @@ -# Getting Started - -### Different CFWs - -?> Before starting, make sure to update your Wii U console to the latest firmware (5.5.4 for European consoles, 5.5.3 for all other regions) if you haven't already. - -The first thing to decide is what CFW you want to use. - -There are two main CFWs: Haxchi/ColdBootHaxchi (CBHC) and Mocha.
-The table below lists the advantages and disadvantages of each option. - - - -#### **Haxchi** -- Requires a legitimately installed paid DS VC game from the eShop. -- Can be used to launch CFW directly from the Wii U Menu. -- Needs to be re-launched from the Wii U Menu every reboot to enable CFW. -- Its functionality can be extended by installing ColdBootHaxchi (CBHC) to a Haxchi installation. - -#### **CBHC** -!> Installing CBHC incorrectly can brick your Wii U. Make sure to follow the following rules when installing CBHC:
- The DS game has to be legitimately installed from the eShop
- Don't format the system while CBHC is installed
- Don't delete the user account that bought the DS VC game
- Don't re-install the same game using WUP Installer or from the eShop
- Don't install Haxchi over CBHC - -!>Breaking one of the above rules will result in a brick. - -- Same (dis)advantages as Haxchi, but automatically launches CFW on every boot. - -#### **Mocha** -- Does not require any game, and is therefore free. -- Needs to be re-launched through the browser exploit every reboot to enable CFW. - - - - -### Compatible DS VC Games - -!> If you are installing Haxchi or CBHC, make sure to unplug any USB devices attached to the console before installing the DS game and further following the guide! - -?> This is only needed if you want to use Haxchi or CBHC as your CFW. Mocha CFW does not require a game. - -The following games are compatible with Haxchi: -- Animal Crossing: Wild World -- Big Brain Academy -- Brain Age -- DK: Jungle Climber -- Dr. Kawashima’s Brain Training -- Kirby: Canvas Curse -- Kirby: Mass Attack -- Kirby: Squeak Squad / Kirby: Mouse Attack -- Legend of Zelda: Phantom Hourglass -- Legend of Zelda: Spirit Tracks -- Mario & Luigi: Partners in Time -- Mario Kart DS -- New Super Mario Bros. -- Pokemon Mystery Dungeon: Explorers of the Sky -- Starfox Command -- Super Mario 64 DS -- Wario: Master of Disguise -- WarioWare: Touched -- Yoshi’s Island DS -- Yoshi’s Touch & Go - -Currently, Brain Age is the cheapest title for 6.99 USD. diff --git a/docs/user-guide/installing-hbc.md b/docs/user-guide/installing-hbc.md deleted file mode 100644 index f099cbb87..000000000 --- a/docs/user-guide/installing-hbc.md +++ /dev/null @@ -1,38 +0,0 @@ -# Installing the Homebrew Launcher Channel - -This page will install the Homebrew Launcher Channel as an application directly to your Home Menu for easy access. - -?> This page is only for Haxchi and CBHC users. The Home-Menu Homebrew Launcher Channel will **not** work with Mocha CFW! - -### Instructions - - - -#### **Haxchi** - -?> Installing the Homebrew Launcher Channel is optional as you can already launch it by holding the A button while launching Haxchi. - -1. Power on your console -1. Launch the Haxchi DS game from the Wii U Menu. This will re-launch the Wii U Menu with CFW activated. -1. Launch the Haxchi DS game again while holding the A button. This will launch the Homebrew Launcher. -1. Navigate the Homebrew Launcher and launch the WUP Installer GX2 app. -1. Use the touchscreen to select `hbc`. Press `Install` and confirm with `Yes`. -1. Select NAND as the installation destination. This will install the Homebrew Launcher Channel to the Wii U Menu. -1. Once the process is finished, press the Home button until you're back at the Wii U Menu. -1. You will now see the Homebrew Launcher Channel installed on your Wii U Menu. Keep in mind you will need to launch cfw every reboot to run this channel. - -### **CBHC** - -1. Power on your console -1. Press the Home button during the `Autobooting...` screen to get into the boot menu. -1. Select `Boot Homebrew Launcher` to launch the Homebrew Launcher. -1. Navigate the Homebrew Launcher and launch the WUP Installer GX2 app. -1. Use the touchscreen to select `hbc`. Press `Install` and confirm with `Yes`. -1. Select NAND as the installation destination. This will install the Homebrew Launcher Channel to the Wii U Menu. -1. Once the process is finished, press the Home button until you're back at the Wii U Menu. -1. You will now see the Homebrew Launcher Channel installed on your Wii U Menu. - -### **Mocha** -!> The Homebrew Launcher Channel is not compatible with Mocha - - diff --git a/docs/user-guide/launching-cfw.md b/docs/user-guide/launching-cfw.md deleted file mode 100644 index c8ac435dd..000000000 --- a/docs/user-guide/launching-cfw.md +++ /dev/null @@ -1,52 +0,0 @@ -# Launching CFW - -Now that you have your NAND backup in case anything goes wrong later, you can run CFW on your system. - -Unlike systems such as the DSi, Wii, or 3DS, Wii U CFW is temporary. This means that as soon as your system reboots, you will lose CFW and have to follow these instructions again. This can be skipped by installing CBHC to a Haxchi CFW installation. - -### Instructions - - - -#### **Haxchi** - -?> If the install fails for some reason, try uninstalling and redownloading the DS VC game from the eShop and make sure it is being installed to the NAND. - -1. Take the SD Card out of your PC and plug it into your Wii U. -1. If you haven't already, now download your DS VC game of choice from the eShop. -1. Launch the Homebrew Launcher on your system as [previously explained](user-guide/browser-exploit). -1. Navigate the Homebrew Launcher and open the Haxchi app. -1. Use the DPAD to navigate the cursor to the game you want to install Haxchi to and press the A button to install it. -1. Once the installation has finished, your console will launch the Wii U Menu. You will see your game replaced by a Haxchi icon. -1. Run the modified DS game. This will reboot the console and enable CFW. -1. You will need to run your Haxchi DS game every reboot to launch CFW. -1. You can now re-attach any USB devices you had attached before starting the guide. - -#### **CBHC** - -1. Take the SD Card out of your PC and plug it into your Wii U. -1. If you haven't already, now download your DS VC game of choice from the eShop. -1. Launch the Homebrew Launcher on your system as [previously explained](user-guide/browser-exploit). -1. Navigate the Homebrew Launcher and open the Haxchi app. -1. Use the DPAD to navigate the cursor to the game you want to install Haxchi to and press the A button to install it. -1. Once the installation has finished, your console will launch the Wii U Menu. You will see your game replaced by a Haxchi icon. -1. Run the modified DS game. This will reboot the console and enable CFW. -1. Run the modified DS game again and hold the A button after launching it. This will run the Homebrew Launcher. -1. Navigate the Homebrew launcher and run the CBHC app. -1. Use the DPAD to navigate the cursor to the game you previously installed Haxchi to and press the A button to install CBHC. -1. Once the installation has finished, your console will launch the Wii U Menu. -1. Reboot your console. If CBHC installed correctly, you should see a new boot menu. -1. Use the DPAD to navigate to `Autoboot: Disabled` and press the A button until it says `Autoboot: System Menu`. -1. Use the DPAD to navigate to `Boot System Menu` and press the A button. This will launch the Wii U Menu with CFW enabled. -1. Your console now automatically boots into CFW every reboot. -1. You can now re-attach any USB devices you had attached before starting the guide. - -#### **Mocha** - -1. Take the SD Card out of your PC and plug it into your Wii U. -1. Launch the Homebrew Launcher on your system as [previously explained](user-guide/browser-exploit). -1. Navigate the Homebrew Launcher and open the Mocha app. -1. Your console will launch the Wii U Menu and enable CFW. -1. You will need to re-do these steps every reboot to launch cfw. - - diff --git a/docs/user-guide/nand-backup.md b/docs/user-guide/nand-backup.md deleted file mode 100644 index 76caeac40..000000000 --- a/docs/user-guide/nand-backup.md +++ /dev/null @@ -1,23 +0,0 @@ -# Making a NAND Backup - -In case anything should go wrong in the later process and your Wii U ends up bricked, restoring a previously made NAND backup can fix it. - -### Instructions - -?> The Wii U NAND is (depending on your model) either 8 or 32GB. As a result of this, to create a full backup of your console's NAND, your SD Card has to be larger than the size of your NAND. If you do not have a large enough SD Card, you can skip the optional `MLC` section which includes save files and game data and is not needed to recover most types of bricks. - -?> Restoring a NAND Backup on the Wii U requires additional hardware and micro soldering skills. -
However, making a NAND Backup is **always** useful, so please do not skip it. -
Your NAND Backup is unique to your system. Backups from other consoles **won't** work. - -> 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app. -> 1. Use the Wii U Gamepad's DPAD to enter the following configuration: - - Dump SLC: **yes** - - Dump SLCCMPT: **yes** - - Dump MLC: **optional** - - Dump OTP: **yes** - - Dump SEEPROM: **yes** -> 1. Press the A button to start the dumping process. -> 1. When the process completed, power off your Wii U, take your SD Card out of the Wii U and plug it into your PC. -> 1. To make sure you don't lose the files, copy the `slc.bin`, `slccmpt.bin`, `seeprom.bin`, `otp.bin` and if you chose to go with a full backup, `every mlc.bin.part` file to your computer. -> 1. Delete the files from your SD Card to free up space. diff --git a/docs/user-guide/sd-preparation.md b/docs/user-guide/sd-preparation.md deleted file mode 100644 index 6c8851db1..000000000 --- a/docs/user-guide/sd-preparation.md +++ /dev/null @@ -1,110 +0,0 @@ -# SD Preparation - -We will now place the required CFW files and some additional homebrew files on the SD Card. - -?> **Notice** - Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) with 32k (32768) Allocation unit size to format it. - -### What You Need - - - -#### **Haxchi** - -- The Haxchi config -- The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest) - - You will need to download the `payload.zip` file. -- The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4) - - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher -- The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip) -- The latest release of [The Homebrew Launcher Channel](https://github.com/dimok789/homebrew_launcher/releases/latest) - - You will need to download the `channel.zip` file. -- The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest) -- The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest) - - You will need to download the `wiiu-extracttosd.zip` file. -- The latest release of [Haxchi](https://github.com/FIX94/haxchi/releases/latest) - - Download only the Haxchi .zip file. - -#### **CBHC** - -- The Haxchi config -- The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest) - - You will need to download the `payload.zip` file. -- The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4) - - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher -- The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip) -- The latest release of [The Homebrew Launcher Channel](https://github.com/dimok789/homebrew_launcher/releases/latest) - - You will need to download the `channel.zip` file. -- The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest) -- The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest) - - You will need to download the `wiiu-extracttosd.zip` file. -- The latest release of [Haxchi and CBHC](https://github.com/FIX94/haxchi/releases/latest) - - Download both the Haxchi and CBHC .zip files. - -#### **Mocha** - -- The Mocha config -- The latest release of [Homebrew Launcher Installer](https://github.com/wiiu-env/homebrew_launcher_installer/releases/latest) - - You will need to download the `payload.zip` file. -- The 1.4 release of [The Homebrew Launcher](https://github.com/dimok789/homebrew_launcher/releases/tag/1.4) - - You will need to download the v1.4 `homebrew_launcher.v1.4.zip` release of The Homebrew Launcher -- The latest release of [WUP Installer GX2](http://wiiubru.com/appstore/zips/wup_installer_gx2.zip) -- The latest release of [Wii U NAND Dumper](https://github.com/koolkdev/wiiu-nanddumper/releases/latest) -- The latest release of the [Homebrew App Store](https://github.com/vgmoose/hbas/releases/latest) - - You will need to download the `wiiu-extracttosd.zip` file. -- The latest release of [Mocha](https://www.wiiubru.com/appstore/zips/mocha.zip) - - - - -### Instructions - - - -#### **Haxchi** - -?> **Notice** - The info.json and manifest.install files are not needed for the modding process and therefore can be deleted. -1. Insert your Wii U's SD card into your PC -1. Create a folder called `install` on the root of your SD Card -1. Create a folder called `hbc` in the `install` folder you created -1. Extract the `homebrew_launcher_channel.zip` file to the `hbc` folder you created -1. Extract the `Haxchi.zip` file to the root of your SD Card -1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card -1. Extract the `nanddumper.zip` file to the root of your SD Card -1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card -1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card -1. Copy the `config.txt` file to the `haxchi` folder on your SD Card. Overwrite files if asked -1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card - -#### **CBHC** - -?> **Notice** - The info.json and manifest.install files are not needed for the modding process and therefore can be deleted. -1. Insert your Wii U's SD Card into your PC -1. Create a folder called `install` on the root of your SD Card -1. Create a folder called `hbc` in the `install` folder you created -1. Extract the `homebrew_launcher_channel.zip` file to the `hbc` folder you created -1. Extract the `Haxchi.zip` file to the root of your SD Card -1. Extract the `CBHC.zip` file to the root of your SD Card -1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card -1. Extract the `nanddumper.zip` file to the root of your SD Card -1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card -1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card -1. Copy the `config.txt` file to the `haxchi` folder on your SD Card. Overwrite files if asked -1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card - -#### **Mocha** - -?> **Notice** - The info.json and manifest.install files are not needed for the modding process and therefore can be deleted. -1. Insert your Wii U's SD Card into your PC -1. Extract the `wup_installer_gx2.zip` file to the root of your SD Card -1. Extract the `nanddumper.zip` file to the root of your SD Card -1. Extract the `wiiu-extracttosd.zip` file to the root of your SD Card -1. Extract the `homebrew_launcher.v.1.4.zip` to the root of your SD Card -1. Extract the `mocha.zip` file to the root of your SD Card -1. Copy the `config.ini` file to the `/wiiu/apps/mocha` folder on your SD Card -1. Copy the `payload.elf` from the `payload.zip` to the `wiiu` folder on your SD Card - -