Some more changes

See Discord

getting-started.md

@@ -2,6 +2,8 @@
 
 ### Different CFWs
 
+?> Before starting, make sure to update your Wii U console to the latest firmware (5.5.4 for European consoles, 5.5.3 for all other regions) if you haven't already.
+
 The first thing to decide is what CFW you want to use.
 
 There are two main CFWs:

installing-hbc.md

@@ -18,7 +18,7 @@ This page will install the Homebrew Channel as an application directly to your H
 > 6. Select NAND as the installation destination. This will install the Homebrew Channel to the Wii U Menu.
 > 7. Once the process is finished, press the Home button until you're back at the Wii U Menu.
 > 8. You will now see the Homebrew Channel installed on your Wii U Menu. Keep in mind you will need to launch cfw every reboot to run this channel.
-> 9. You can now re-attach any USB devices you had attached before starting the guide.
+
 ### **CBHC**
 
 > 1. Power on your console
@@ -29,5 +29,5 @@ This page will install the Homebrew Channel as an application directly to your H
 > 6. Select NAND as the installation destination. This will install the Homebrew Channel to the Wii U Menu.
 > 7. Once the process is finished, press the Home button until you're back at the Wii U Menu.
 > 8. You will now see the Homebrew Channel installed on your Wii U Menu.
-> 9. You can now re-attach any USB devices you had attached before starting the guide.
+
 <!-- tabs:end -->

introduction.md

@@ -22,7 +22,7 @@ For live support with this guide please visit us in **#wiiu-assistance** on [Nin
 > * Play games for older systems with various emulators, using RetroArch or other standalone emulators
 > * Play out-of-region games
 >
-> CFW can be set up on any console on any version (but will require additional software).
+> CFW can be set up on any console on the latest version (but will require additional software).
 ### End Goal
 
 > This guide has the end goal of taking a completely unmodified Wii U from Stock to Custom Firmware.
@@ -43,7 +43,7 @@ For live support with this guide please visit us in **#wiiu-assistance** on [Nin
 
 If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 
-Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off.
+Keep your device plugged in throughout the entire process to avoid data loss or damage from an unexpected power-off.
 
 Custom Firmware is not permanent with current methods, and will be unloaded upon rebooting the system.
 

launching-cfw.md

@@ -18,6 +18,7 @@ Unlike systems such as the DSi, Wii, or 3DS, Wii U CFW is temporary. This means
 > 6. Once the installation has finished, your console will launch the system menu. You will see your game replaced by a haxchi icon.
 > 7. Run the modified DS game. This will reboot the console and enable CFW.
 > 8. You will need to run your Haxchi DS game every reboot to launch CFW.
+> 9. You can now re-attach any USB devices you had attached before starting the guide.
 
 #### **Haxchi and CBHC**
 
@@ -36,6 +37,7 @@ Unlike systems such as the DSi, Wii, or 3DS, Wii U CFW is temporary. This means
 > 13. Use the DPAD to navigate to `Autoboot: Disabled` and press the A button until it says `Autoboot: System Menu`.
 > 14. Use the DPAD to navigate to `Boot System Menu` and press the A button. This will launch the Wii U Menu with CFW enabled.
 > 15. Your console now automatically boots into CFW every reboot.
+> 16. You can now re-attach any USB devices you had attached before starting the guide.
 
 #### **Mocha**
 

nand-backup.md

@@ -4,7 +4,7 @@ In case anything should go wrong in the later process and your Wii U ends up bri
 
 ### Instructions
 
-?> The Wii U NAND is (depending on your model) either 8 or 32gb. As a result of this, to create a full backup of your console's NAND, your SD Card has to be larger than the size of your NAND. If you do not have a large enough SD Card, you can skip the optional `MLC` section which includes save files and game data.
+?> The Wii U NAND is (depending on your model) either 8 or 32gb. As a result of this, to create a full backup of your console's NAND, your SD Card has to be larger than the size of your NAND. If you do not have a large enough SD Card, you can skip the optional `MLC` section which includes save files and game data and is not needed to recover most types of bricks.
 
 > 1. Navigate through the Homebrew Launcher and launch the `Wii U NAND Dumper` app.
 > 2. Use the Wii U Gamepad's DPAD to enter the following configuration:

sidebar.md

@@ -5,7 +5,7 @@
 - [Browser Exploit](browser-exploit)
 - [Making a NAND Backup](nand-backup)
 - [Launching CFW](launching-cfw)
-- [Installing the Homebrew Channel](installing-hbc)
+- [Installing the Homebrew Channel (optional)](installing-hbc)
 - [FAQ](faq)
 - **Extras**
 - [Themes](themes)