Guide_3DS/_pages/no_NO/move-emunand.txt

---
title: "Move EmuNAND"
---

{% include toc title="Table of Contents" %}

### Required Reading

This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection).

Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions.

You MUST have already installed Luma3DS and boot9strap to use this.
{: .notice--danger}

### What You Need

* En eksisterende EmuNAND
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)

### Instructions

#### Section I - Prep Work

1. Power off your console
1. Sett inn SD-kortet i datamaskinen din
1. Kopier `GodMode9.firm` fra GodMode9 `.zip` til `/luma/payloads/` på SD-kortet ditt
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
1. Reinsert your SD card into your console

#### Section II - Backup SysNAND DSiWare Saves

If you do not have any DSiWare games or saves that you care about, skip this section.
{: .notice--info}

1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it is completed
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
    + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
1. Navigér til `[2:] SYSNAND TWLN` -> `title`
1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9/out"
    + This process may take some time if you have many DSiWare games
1. Trykk (B) to ganger for å gå tilbake til hovedmenyen

#### Section III - Backup GBA VC Saves

If you do not have any GBA VC games or saves that you care about, skip this section.
{: .notice--info}

Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc)
{: .notice--info}

The game will be outputted to the `/gm9/out/` folder on your SD card with the name `<TitleID>.gbavc.sav`.
{: .notice--info}

To identify a `<TitleID>.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by pressing (Home) to bring up the action menu, selecting `Title manager`, and selecting `[A:] SD CARD`.
{: .notice--info}

1. Do the following process for each GBA VC game that you want to back up the save for:
    + Launch the GBA VC game
    + Exit the GBA VC game
    + Boot your console while holding (Start) to launch the Luma3DS chainloader menu
    + Start GodMode9 ved å trykke (A)
    + Navigér til `[S:] SYSNAND VIRTUAL`
    + Press (A) on `agbsave.bin` to select it
    + Select "AGBSAVE options..."
    + Select "Dump GBA VC save"
    + Press (A) to continue
    + Press (Start) to reboot your console

#### Section IV - Copy EmuNAND to SysNAND

1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
1. Navigér til `[E:] EMUNAND VIRTUAL`
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
    + This will not overwrite your boot9strap installation
1. Input the key combo given to unlock SysNAND (lvl1) writing
    + Denne prosessen vil ta litt tid
1. Once it is completed, press (A) to continue
1. Press (B) to decline relocking write permissions if prompted
1. Press (B) to return to the main menu

#### Section V - Restore DSiWare Saves

If you did not backup DSiWare Saves earlier, skip this section.
{: .notice--info}

1. Navigate to `[0:] SDCARD` -> `gm9` -> `out`
1. Press (Y) on the `00030004` folder to copy it
1. Trykk (B) to ganger for å gå tilbake til hovedmenyen
1. Navigér til `[2:] SYSNAND TWLN` -> `title`
1. Press (Y) to paste the `00030004` folder
1. Velg "Copy path(s)"
1. Trykk (A) for å låse opp SysNAND (lvl1) skriving, deretter trykk in den gitte tastekombinasjonen
1. Velg "Overwrite file(s)"
    + This process may take some time if you have many DSiWare games
1. Press (B) to decline relocking write permissions if prompted
1. Trykk (B) to ganger for å gå tilbake til hovedmenyen

#### Section VI - Restore GBA VC Saves

If you did not backup GBA VC Saves earlier, skip this section.
{: .notice--info}

To identify a `<TitleID>.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by pressing (Home) to bring up the action menu, selecting `Title manager`, and selecting `[A:] SD CARD`.
{: .notice--info}

1. Hold (R) and press (Start) at the same time to power off your console
1. Power on your console into SysNAND
1. Do the following process for each GBA VC game that you want to restore the save for:
    + Launch the GBA VC game
    + Exit the GBA VC game
    + Boot your console while holding (Start) to launch the Luma3DS chainloader menu
    + Start GodMode9 ved å trykke (A)
    + Navigate to `[0:] SDCARD` -> `gm9`
    + Press (Y) on the `<TitleID>.gbavc.sav` file you wish to restore to copy it
    + Press (B) to return to the main menu
    + Navigér til `[S:] SYSNAND VIRTUAL`
    + Press (A) on `agbsave.bin` to select it
    + Select "AGBSAVE options..."
    + Select "Inject GBA VC save"
    + Press (A) to continue
    + Press (Start) to reboot your console
    + Launch the GBA VC game
    + Exit the GBA VC game

#### Section VII - Backup SysNAND

1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
{% include_relative include/nand-backup.txt -%}
1. **Sikkerhetskopiér alle filene på SD-kortet til en mappe på datamaskinen, alle filene vil slettes i det neste trinnet**

#### Section VIII - Format SD card

1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
{% include_relative include/format-sd-gm9.txt -%}
1. Hold (R) og trykk (B) for å løse ut SD-kortet
1. Sett inn SD-kortet i datamaskinen din
1. Copy all your files back to your SD card
    + Ensure you replace the `boot.firm` file on your SD card with the one from your backup
1. Reinsert your SD card into your console
1. Trykk (A) for å montere SD-kortet på nytt
1. Press (Start) to reboot

___

### Return to [Finalizing Setup](finalizing-setup).
{: .notice--primary}