Guide_3DS/_pages/nl_NL/Updating-to-Boot9Strap.txt

---
title: "Updating to boot9strap" #
lang: nl
permalink: /updating-to-boot9strap.html
---

This page is for existing arm9loaderhax users to update their devices to boot9strap.
{: .notice--info}

All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
{: .notice--info}

If you have a PIN set on Luma, you must temporarily turn it off to do these steps, or you will get an "OTP Crypto Fail" error. Na de update kan je de PIN weer aanzetten.
{: .notice--warning}

{% capture notice-1 %}

If you have the software "3dsafe" installed, you must remove it to do these steps, or you will get an "OTP Crypto Fail" error.
<br><br>
To do this, extract [the latest release of arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases) (the payload files) to a folder named `a9lh` on the root of your SD card, then boot 3dsafe, input your pin and hold down the last key when you do. From there, while holding this key, press (X) to launch the integrated SafeA9LHInstaller, then press (Select) to "update" to standard arm9loaderhax.

{% endcapture %}

<div class="notice--warning">{{ notice-1 | markdownify }}</div>

Om een [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) link te gebruiken in deze handleiding, moet je een torrent client hebben zoals [Deluge](http://dev.deluge-torrent.org/wiki/Download)
{: .notice--success}

#### Benodigdheden

Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below.
{: .notice--info}

Note that `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console.
{: .notice--info}

* <i class="fa fa-magnet" aria-hidden="true" title="Dit is een magnet link. Use a torrent client to download the file."></i> - [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
* De meest recente versie van [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(het `.7z` bestand)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest)
* De meest recente versie van [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* The latest fork of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)

### Instructies

##### Deel I - Voorbereiding

1. Schakel je 3DS uit
1. Plaats je SD kaart in je computer
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
1. Maak een map genaamd `cias` in de hoofdmap van je SD kaart als deze nog niet bestaat
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card

    ![]({{ base_path }}/images/screenshots/updating-to-b9s-file-layout.png)
    {: .notice--info}

1. Stop je SD kaart terug in je 3DS

##### Section II - Installing boot9strap

1. Start je 3DS terwijl je (Start) ingedrukt houdt om het Luma3DS chainloader menu te openen
  + Some versions of Luma3DS will just directly start whichever payload begins with `start_`
  + If your version does this, just proceed with the instructions
1. Launch SafeB9SInstaller by pressing (A) on it
  + If this gives you an error, try either using a new SD card, or formatting your current SD card (backup existing files first)
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device.
  + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.7z` to the root of your SD card

### Deel III - Luma3DS configureren

This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
{: .notice--info}

1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:    
  + **"Show NAND or user string in System Settings"**
1. Druk op (Start) om op te slaan en opnieuw op te starten

### Deel IV - CTRNAND Luma3DS

1. Herstart terwijl je (Start) ingedrukt houd om het Luma3DS chainloader menu te openen
1. Open GodMode9 door op (A) te drukken
1. Navigate to `[0:] SDCARD` -> `luma` -> `payloads`
1. Press (X) on `start_SafeB9SInstaller.bin` to delete it
1. Druk op (A) om te bevestigen
1. Press (B) to return to `[0:] SDCARD`
1. Press (Y) on `boot.firm` to copy it
1. Druk op (B) om terug te gaan naar het hoofdmenu
1. Navigeer naar `[1:] SYSNAND CTRNAND`
1. Press (Y) to paste a copy of `boot.firm`
1. Selecteer "Copy path(s)"
1. Druk op (A) om SysNAND (lvl1) writing te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven
1. Press (X) on `arm9loaderhax.bin` to delete it
  + If you do not have this file, just proceed with the instructions
1. Druk op (A) om te bevestigen
1. Druk op (B) om terug te gaan naar het hoofdmenu
1. Houd (R) en (B) gelijkertijd ingedrukt om je SD kaart uit te werpen
1. Verwijder je SD kaart uit je 3DS
1. Drup op (Start) om je 3DS opnieuw op te starten met de SD kaart verwijderd
  + Door het apparaat tenminste één keer op te starten zonder de SD kaart laat je de op CTRNAND gebasseerde Luma3DS installatie configureren
1. Selecteer de volgende opties met de D-pad en de (A) knop:    
  + **"Show NAND or user string in System Settings"**
1. Stop je SD kaart terug in je 3DS
1. Druk op (Start) om op te slaan en opnieuw op te starten

##### Section V - Installing Luma3DS Updater

1. Open FBI
1. Navigeer naar `SD` -> `cias`
1. Select `lumaupdater.cia`
1. Select the "Install CIA" option, then press (A) to confirm
1. Druk op (Home) om FBI af te sluiten

___

You can now remove any arm9loaderhax related files from your SD card, such as `arm9loaderhax.bin` on the root of your SD card and the `aeskeydb.bin` file in the `files9` folder on your SD card.
{: .notice--info}

Note that `firm0firm1.bak` and `sector0x96.bak` in the `/boot9strap/` folder on your SD card are only needed in the event of a failed boot9strap install. Once you have installed successfully, you can delete the entire `boot9strap` folder.
{: .notice--info}

This fork of Luma3DS Updater allows for boot9strap compatibility by downloading and extracting the latest Luma3DS `boot.firm` for you.
{: .notice--info}

{% capture notice-6 %}   
Je kan nu (Select) ingedrukt houden bij het opstarten om in het Luma3DS instellingenmenu te komen.    
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
{% endcapture %}

<div class="notice--info">{{ notice-6 | markdownify }}</div>