Guide_3DS/_pages/no_NO/finalizing-setup.txt

---
title: "Finalizing Setup"
---

### Oversikt over trinn

{% capture notice-2 %}

The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
<br><br>
I dette tilfellet bruker vi Luma3DS fra [AuroraWright](https://github.com/AuroraWright/) for å starte et patchet SysNAND direkte, slik at vi kan omgå behovet for alle slags EmuNAND fullstendig, og dermed forenkle bruken av en hacket 3DS utover det å spare plass på SD-kort.
<br><br>
Under denne prossesen, vil vi også sette opp program som følgende:    

+  **FBI** *(installerer CIAformaterte spill og applikasjoner)*
+  **Themely** *(installs custom themes)*
+  **Luma3DS Updater** *(oppdaterer CFWinstallasjonen vår)*
+  **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*

{% endcapture %}

<div class="notice--info">{{ notice-2 | markdownify }}</div>

#### Det du trenger

* Siste utgave av [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-filen)*
* The latest release of [Themely](https://github.com/ErmanSayin/Themely/releases/latest) *(the `.cia` file)*
* Siste utgave av [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest)
* Siste utgave av [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* Siste utgave av [FBI](https://github.com/Steveice10/FBI/releases/latest)
* The latest fork of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
* **Old 3DS and 2DS Only:** The Old 3DS 11.2.0-35 [otherapp payload](https://smealum.github.io/3ds/#otherapp) for your region

#### Instruksjoner

##### Seksjon I - Forarbeid

1. Sett inn SD-kortet i datamaskinen din
1. Opprett en mappe kalt `cias` på roten av SD-kortet hvis den ikke allerede er der
1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Kopier `hblauncher_loader.cia` fra hblauncher_loader `.zip` til `/cias/` mappen på SD-kortet
1. Kopier `lumaupdater.cia` fra Luma3DS Updater `.zip` til `/cias/` mappen på SD-kortet
1. Kopier `FBI.cia` fra FBI `.zip` til `/cias/` mappen på SD-kortet
1. Copy `DSP1.cia` to the `/cias/` folder on your SD card
1. Copy `Themely.cia` to the `/cias/` folder on your SD card

    ![]({{ base_path }}/images/screenshots/cias-file-layout.png)
    {: .notice--info}

1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
1. Opprett en mappe med navn `luma` på roten av SD-kortet
1. Opprett en mappe med navnet `payloads` i `luma` mappen på SD-kortet
1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. **Old 3DS and 2DS Only:** Copy the Old 3DS 11.2.0-35 otherapp payload for your region to the `/hblauncherloader/` folder on your SD card
1. **Old 3DS and 2DS Only:** Rename the Old 3DS 11.2.0-35 otherapp payload on your SD card to match your region:
  + **EUR:** `OLD-11-4-0-37-EUR.bin`
  + **JPN:** `OLD-11-4-0-37-JPN.bin`
  + **KOR:** `OLD-11-4-0-37-KOR.bin`
  + **USA:** `OLD-11-4-0-37-USA.bin`

    ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
    {: .notice--info}

1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
  + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) og endre navnet til `firmware.bin`
  + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
  + Kopier `firmware.bin` og `cetk` til `/luma/` mappen på SD-kortet
  + Delete both of these files after updating your device later in these instructions
1. Reinsert your SD card into your device

##### Section II - Configuring Luma3DS

1. Boot your device to enter the Luma3DS configuration menu
  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Bruk (A)-knappen og piltastene for å aktivere følgende:    
  + **"Show NAND or user string in System Settings"**
1. Trykk (Start) for å lagre og starte på nytt
  + Hvis du får svart skjerm, bare fortsett til neste seksjon   

##### Section III - Updating the System

If, while following a previous version of this guide, you CTRTransfered your *New 3DS* to 2.1.0, now is the time to [restore your NAND backup](godmode9-usage#nand_restore) before doing this section.
{: .notice--danger}

If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section.
{: .notice--info}

1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
  + Updates while using B9S + Luma (what you have) are safe
  + Hvis dette gir deg en feil, sett DNS-innstillingene til "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again

##### Section IV - Injecting FBI

1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)
1. Navigate to `[0:] SDCARD` -> `cias`
1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Trykk (A) for å fortsette
1. Press (Start) to reboot your device
1. Hvis du fortsatt starter den normale Health & Safety appen og har nedgradert med Gateway tidligere [Følg denne feilsøkingsveiledningen](troubleshooting#gw_fbi)

##### Section V - Installing CIAs

1. Launch Health and Safety (which is now FBI)
1. Navigate to `SD` -> `cias`
1. Velg "\<current directory>"
1. Select the "Install all CIAs" option, then press (A) to confirm
1. Press (Home) to exit FBI

##### Section VI - DSP Dump

1. Launch DSP1
1. Once it has completed, press (Start) to exit

##### Section VII - Restore Health and Safety

1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)
1. Press (Home) to bring up the action menu
1. Select "More..."
1. Select "Restore H&S"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given

##### Section VIII - CTRNAND Luma3DS

1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)
1. Navigate to `[0:] SDCARD` -> `luma` -> `payloads`
1. Press (X) on `start_SafeB9SInstaller.bin` to delete it
1. Trykk (A) for å bekrefte
1. Press (B) to return to `[0:] SDCARD`
1. Press (Y) on `boot.firm` to copy it
1. Press (B) to return to the main menu
1. Navigate to `[1:] SYSNAND CTRNAND`
1. Press (Y) to paste a copy of `boot.firm`
1. Select "Copy path(s)"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Press (B) to return to the main menu
1. Navigate to `[0:] SDCARD`
1. Press (Y) on the `luma` folder to copy it
1. Press (B) to return to the main menu
1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
1. Press (X) on the existing `luma` folder to delete it
  + If you do not have this folder, just proceed with the instructions
1. Trykk (A) for å bekrefte
1. Press (Y) to paste a copy of the `luma` folder from your SD card
1. Press (Start) to reboot

##### Section IX - NAND Backup

1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)
1. Press (Home) to bring up the action menu
1. Select "More..."
1. Select "Backup NAND"
1. Trykk (A) for å fortsette
1. Hold (R) og trykk (B) for å løse ut SD-kortet
1. Sett inn SD-kortet i datamaskinen din
1. Copy `nand.bin` from the `/gm9out/` folder on your SD card to a safe location on your computer
  + Make backups in multiple locations (such as online file storage)
  + Denne sikkerhetskopien vil spare deg fra en brick hvis noe går galt i fremtiden
1. Delete `nand.bin` from the `/gm9out/` folder on your SD card after copying it
1. Reinsert your SD card into your device
1. Trykk (Start) for å lagre og starte på nytt

___

{% capture notice-10 %}
Du kan nå bruke "Luma3DS Updater" for å oppdatere din Luma3DS til siste versjon, ved å åpne den og trykke (A).     
Dette er ikke det samme som en systemoppdatering; den bare laster ned og pakker ut de nyeste Luma3DS-filene.
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.    
{% endcapture %}

<div class="notice--info">{{ notice-10 | markdownify }}</div>

{% capture notice-6 %}   
You will now boot Luma3DS CFW SysNAND by default.    
Du kan holde (Select) ved oppstart for å laste Luma3DSs konfigurasjonsmeny.    
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
{% endcapture %}

<div class="notice--info">{{ notice-6 | markdownify }}</div>

To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
{: .notice--info}

{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image:
<br><br>
![]({{ base_path }}/images/screenshots/final-file-layout.png)
{% endcapture %}

<div class="notice--info">{{ notice-7 | markdownify }}</div>

For informasjon om hvordan du endrer enheten til en annen region, sjekk ut [regionsbyttesiden](region-changing).
{: .notice--success}

For information on using GodMode9's various features, check out the [GodMode9 Usage](godmode9-usage) page.
{: .notice--success}

For informasjon om bruk av Luma3DS sine forskjellige funksjoner, sjekk ut [Lumas wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
{: .notice--success}

For information on installing custom themes, badges, and splash screens, check out [3dsthem.es](https://3dsthem.es/about.php).
{: .notice--success}