Guide_3DS/_pages/de_DE/Updating-to-Boot9Strap.txt

139 lines
8.9 KiB
Text
Raw Normal View History

2017-05-21 22:39:40 +02:00
---
title: "Updating to boot9strap" #
lang: de
permalink: /updating-to-boot9strap.html
---
This page is for existing arm9loaderhax users to update their devices to boot9strap.
{: .notice--info}
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
{: .notice--info}
If you have a PIN set on Luma, you must temporarily turn it off to do these steps, or you will get an "OTP Crypto Fail" error. Du kannst ihn nach dem Update erneut einrichten.
{: .notice--warning}
{% capture notice-1 %}
If you have the software "3dsafe" installed, you must remove it to do these steps, or you will get an "OTP Crypto Fail" error.
<br><br>
To do this, extract [the latest release of arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases) (the payload files) to a folder named `a9lh` on the root of your SD card, then boot 3dsafe, input your pin and hold down the last key when you do. From there, while holding this key, press (X) to launch the integrated SafeA9LHInstaller, then press (Select) to "update" to standard arm9loaderhax.
{% endcapture %}
<div class="notice--warning">{{ notice-1 | markdownify }}</div>
Um die [Magnet-Links](https://en.wikipedia.org/wiki/Magnet_URI_scheme) auf dieser Seite zu nutzen, brauchst du einen Torrent-Programm wie [Deluge](http://dev.deluge-torrent.org/wiki/Download)
{: .notice--success}
#### Was du brauchst
Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below.
{: .notice--info}
Note that `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console.
{: .notice--info}
* <i class="fa fa-magnet" aria-hidden="true" title="Dies ist ein Magnetlink. Use a torrent client to download the file."></i> - [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest)
* Der neueste Version von [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* The latest fork of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
#### Anleitung
##### Abschnitt I - Vorbereitung
1. Schalte dein Gerät aus
1. Stecke deine SD-Karte in deinen Computer
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
1. Erstelle einen Ordner mit dem Namen `cias` im Stammverzeichnis deiner SD-Karte, soweit er nicht schon existiert
2017-05-22 22:18:58 +02:00
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
2017-05-21 22:39:40 +02:00
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
![]({{ base_path }}/images/screenshots/updating-to-b9s-file-layout.png)
{: .notice--info}
1. Stecke deine SD-Karte nun wieder in deinen 3DS
##### Section II - Installing boot9strap
1. Starte das Gerät, während du beim booten (Start) gedrückt hälst, um den Luma3DS Chainloader anzuzeigen
+ Some versions of Luma3DS will just directly start whichever payload begins with `start_`
+ If your version does this, just proceed with the instructions
1. Launch SafeB9SInstaller by pressing (A) on it
2017-05-22 22:18:58 +02:00
+ If this gives you an error, try either using a new SD card, or formatting your current SD card (backup existing files first)
2017-05-21 22:39:40 +02:00
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device.
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.7z` to the root of your SD card
##### Abschnitt III - Luma3DS konfigurieren
This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
{: .notice--info}
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Drücke (Start) zum Speichern und neustarten
##### Abschnitt IV - Installation von Luma3DS auf das CTRNAND
1. Starte das Gerät wieder neu, während du (Start) gedrückt hälst, um den Luma3DS Chainlaoder anzuzeigen
1. Starte GodMode9 indem du (A) drückst
1. Navigate to `[0:] SDCARD` -> `luma` -> `payloads`
1. Press (X) on `start_SafeB9SInstaller.bin` to delete it
1. Drücke (A), um zu bestätigen
1. Press (B) to return to `[0:] SDCARD`
1. Press (Y) on `boot.firm` to copy it
1. Drücke (B), um zum Hauptmenü zurückzukehren
1. Navigiere zu `[1:] SYSNAND CTRNAND`
1. Press (Y) to paste a copy of `boot.firm`
1. Wähle "Copy path(s)" aus
1. Drücke (A), um die SysNAND (Stufe 1) Bearbeitung zu aktivieren. Dann gebe die angegebene Tastenkombination ein
1. Press (X) on `arm9loaderhax.bin` to delete it
+ If you do not have this file, just proceed with the instructions
1. Drücke (A), um zu bestätigen
1. Drücke (B), um zum Hauptmenü zurückzukehren
1. Drücke (R) und (B) gleichzeitig um die SD-Karte auszuwerfen
1. Entferne die SD-Karte aus deiner Konsole
1. Drücke (Start), um deine Konsole ohne SD-Karte neu zu starten
+ Dadurch, dass du deine Konsole einmal ohne SD-Karte startest, kannst du die CTRNAND basierte Luma3DS-Installation einrichten
1. Benutze den (A)-Knopf und das (Steuerkreuz), um die folgenden Punkte zu aktivieren:
+ **"Show NAND or user string in System Settings"**
1. Stecke deine SD-Karte nun wieder in deinen 3DS
1. Drücke (Start) zum Speichern und neustarten
##### Section V - Installing Luma3DS Updater
1. Starte FBI
1. Navigiere zu `SD` -> `cias`
2017-05-22 22:18:58 +02:00
1. Select `lumaupdater.cia`
2017-05-21 22:39:40 +02:00
1. Select the "Install CIA" option, then press (A) to confirm
1. Drücke (HOME), um FBI zu verlassen
___
You can now remove any arm9loaderhax related files from your SD card, such as `arm9loaderhax.bin` on the root of your SD card and the `aeskeydb.bin` file in the `files9` folder on your SD card.
{: .notice--info}
Note that `firm0firm1.bak` and `sector0x96.bak` in the `/boot9strap/` folder on your SD card are only needed in the event of a failed boot9strap install. Once you have installed successfully, you can delete the entire `boot9strap` folder.
{: .notice--info}
This fork of Luma3DS Updater allows for boot9strap compatibility by downloading and extracting the latest Luma3DS `boot.firm` for you.
{: .notice--info}
{% capture notice-6 %}
Du kannst nun (Select) beim Starten halten, um das Luma3DS Konfigurationsmenü zu öffnen.
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
{% endcapture %}
<div class="notice--info">{{ notice-6 | markdownify }}</div>