Guide_3DS/_pages/no_NO/installing-boot9strap-(mset9-play-store).txt

---
title: "Installing boot9strap (MSET9 Play Store)"
---

{% include toc title="Table of Contents" %}

{% capture technical_info %}
<summary><em>Technical Details (optional)</em></summary>
[MSET9](https://github.com/zoogie/MSET9) is an exploit for the System Settings application developed by [zoogie](https://github.com/zoogie). It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be *any* name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.

{% endcapture %}
<details>{{ technical_info | markdownify }}</details>
{: .notice--info}

### Compatibility Notes

This page requires an Android phone/tablet or a Chromebook. If you have a computer running Windows, macOS, or Linux, follow [Installing boot9strap (MSET9 CLI)](installing-boot9strap-(mset9-cli)) instead. If you do not have access to any of these devices, you will need to use an [alternate exploit](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits).
{: .notice--warning}

On Android phones/tablets, the minimum Android version required is 6.0 (Marshmallow).
{: .notice--warning}

### What You Need

* The following applications installed from the Google Play Store:
    * [MSET9 Installer](https://play.google.com/store/apps/details?id=moe.saru.homebrew.console3ds.mset9_installer_android)
    * [ZArchiver](https://play.google.com/store/apps/details?id=ru.zdevs.zarchiver)
    * If you wish, you can sideload these applications instead
* The latest release of [MSET9](https://github.com/zoogie/MSET9/releases/latest) (the Release `.zip` file)

### Instructions

#### Section I - Prep Work

In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.

1. Power on your console **with your SD card inserted**
1. Open Mii Maker
1. Wait for your console to reach the "Welcome to Mii Maker" screen, then exit Mii Maker
    + You may see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created
    + If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
1. Power off your console
1. Insert your SD card into your phone/tablet/computer
1. Copy everything from the Release `.zip` to the root of your SD card, overwriting any existing files:
    + Open ZArchiver
    + If prompted, [allow ZArchiver to access files on your SD card](/images/screenshots/mset9/zarchiver-allow.png)
    + Navigate to where the downloaded MSET9 Release `.zip` is located ([likely in the Downloads folder](/images/screenshots/mset9/zarchiver-zip-location.png))
    + Select the Release `.zip`, then select "Extract..." ([image](/images/screenshots/mset9/zarchiver-extract-1.png))
    + Navigate to your SD card, then tap the blue 'down arrow' icon to extract the files to the root of your SD card ([image](/images/screenshots/mset9/zarchiver-extract-2.png))

    ![MSET9 root layout](/images/screenshots/mset9/mset9-root-layout-android.png)
    {: .notice--info}

1. Run the [MSET9 Installer application](/images/screenshots/mset9/mset9-setup-android.png)
1. Tap on `Select "Nintendo 3DS" Folder`, then navigate to your `Nintendo 3DS` folder on your SD card ([image](/images/screenshots/mset9/select-mset9-folder-1.png))
1. Once inside the `Nintendo 3DS` folder, tap on "Use this folder", then "Allow" if asked ([image](/images/screenshots/mset9/select-mset9-folder-2.png))
1. If "Setup MSET9" is [highlighted](/images/screenshots/mset9/setup-mset9-highlighted.png), MSET9 is ready to be injected. Close the MSET9 Installer for now
    + If "Check Again" is highlighted, there is a problem that you need to resolve before you can use MSET9. Refer to the [troubleshooting](troubleshooting#installing-boot9strap-mset9)
1. Reinsert your SD card into your console
1. Power on your console

#### Section II - MSET9

In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).

These instructions must be followed **EXACTLY**, so double-check EVERYTHING you are doing to avoid errors!
{: .notice--danger}

1. **[Hover over](/images/screenshots/mset9/hover-settings.png)** the System Settings icon using the D-Pad (do not select it yet)
1. Power off, then power on your console
1. Press (A) to launch System Settings
1. Navigate to `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([image](/images/screenshots/mset9/settings-extdata.png))
1. **Do not press any buttons or touch the screen** - ensure that you see the Mii Maker icon
1. **With the console STILL ON, and without pressing any buttons or touching the screen**, remove your SD card from your console
    + The menu will refresh and say that no SD card is inserted, which is expected
1. Insert your SD card into your phone/tablet/computer
1. Open the MSET9 Installer application
1. Tap "Setup MSET9"
1. Tap on the photo corresponding to your console model, then on the button corresponding to your current firmware version
    + If the injection was successful, all buttons should become grayed out except for "Remove MSET9"
1. Reinsert your SD card into your console **without pressing any buttons or touching the screen**
1. If the exploit was successful, you will have booted into SafeB9SInstaller 
    + If you get a red screen or the console gets stuck on a loading screen, follow the [troubleshooting guide](troubleshooting#installing-boot9strap-mset9)

#### Section III - Installing boot9strap

{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
{%- include_relative include/configure-luma3ds.txt %}

#### Section IV - Removing MSET9

In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)

Do NOT skip this section! If you skip it, applications may crash unexpectedly and you will encounter errors on the next page!
{: .notice--danger}

1. Power off your console
1. Insert your SD card into your phone/tablet/computer
1. Open the MSET9 Installer application
1. Tap "Remove MSET9"
1. Close the MSET9 Installer application

{% include_relative include/luma3ds-installed-note.txt %}
___

Did you follow Section IV (Removing MSET9)? That section is MANDATORY!
{: .notice--danger}

### Continue to [Finalizing Setup](finalizing-setup)
{: .notice--primary}