Guide_3DS/_pages/ko_KR/Move-EmuNAND.txt

---
title: "EmuNAND 기반 데이터 이동" #
lang: ko
permalink: /ko_KR/move-emunand.html
---

This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. EmuNAND와 RedNAND는 [동일한 개념](http://3dbrew.org/wiki/NAND_Redirection)을 다른 방식으로 구현한 것입니다.
{: .notice--info}

**이 작업을 진행하기 위해서는 arm9loaderhax + Luma3DS가 설치되어 있어야 합니다.**
{: .notice--danger}

#### 준비물

* 설치된 EmuNAND
* 최신 버전의 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* 최신 버전의 [FBI](https://github.com/Steveice10/FBI/releases/latest)

#### 진행 방법

##### 섹션 I - 준비 작업

1. 기기를 종료해 주세요.
1. SD 카드를 컴퓨터에 삽입해 주세요.
1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. Reinsert your SD card into your device

##### 섹션 II - SysNAND DSiWare 세이브 파일 백업

If you do not have any DSiWare games or saves that you care about, skip this section.
{: .notice--info}

1. Launch GodMode9 from arm9loaderhax by holding (Start) on boot
1. Navigate to `SYSNAND TWLN` -> `title`
1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9out"
  + This process may take some time if you have many DSiWare games
1. Press (B) twice to return to the main menu

##### Section III - Backup GBA VC Saves

If you do not have any GBA VC games or saves that you care about, skip this section.
{: .notice--info}

Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc)
{: .notice--info}

1. (R) 버튼을 누른 채 (Start) 버튼을 눌러 기기를 종료해 주세요.
1. SD 카드를 컴퓨터에 삽입해 주세요.
1. Create a folder in `/files9/` for each GBA VC game that you want to backup the save for 
1. SD 카드를 기기에 다시 삽입해 주세요.
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
  + Launch the GBA VC game on SysNAND
  + Exit the GBA VC game
  + Boot your device while holding (Start) to launch the Luma3DS chainloader menu
  + Launch GodMode9 by pressing (A)
  + Navigate to `[S:] SYSNAND VIRTUAL`
  + Press (Y) on `gbavc.sav` to copy it
  + Press (B) to return to the main menu
  + Navigate to `[0:] SDCARD` -> `files9`
  + Navigate to the folder you created for this GBA VC game
  + Press (Y) to paste `gbavc.sav`
  + (Start) 버튼을 눌러 기기를 재시작해 주세요.
1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. (A) 버튼을 눌러 GodMode9를 실행해 주세요.

##### 섹션 IV - EmuNAND를 SysNAND로 복사

1. Navigate to `EMUNAND VIRTUAL`
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
  + This will not overwrite your arm9loaderhax installation
1. Input the key combo given to unlock SysNAND (lvl1) writing
  + This process will take some time
1. Press (A) to continue once it has completed
1. Press (B) to return to the main menu

##### 섹션 V - DSiWare 세이브 파일 복원

If you did not backup DSiWare Saves earlier, skip this section.
{: .notice--info}

1. Navigate to `[0:] SDCARD` -> `gm9out`
1. Press (Y) on the `00030004` folder to copy it
1. Press (B) twice to return to the main menu
1. Navigate to `SYSNAND TWLN` -> `title`
1. Press (Y) to paste the `00030004` folder
1. Select "Copy path(s)"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Select "Overwrite file(s)"
  + This process may take some time if you have many DSiWare games
1. Press (B) twice to return to the main menu

##### 섹션 VI - GBA VC 세이브 파일 복원

If you did not backup GBA VC Saves earlier, skip this section.
{: .notice--info}

1. (R) 버튼을 누른 채 (Start) 버튼을 눌러 기기를 종료해 주세요.
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
  + Launch the GBA VC game on SysNAND
  + Exit the GBA VC game
  + Boot your device while holding (Start) to launch the Luma3DS chainloader menu
  + Launch GodMode9 by pressing (A)
  + Navigate to `[0:] SDCARD` -> `files9`
  + Navigate to the folder you created for this GBA VC game
  + Press (Y) on `gbavc.sav` to copy it
  + Press (B) to return to the main menu
  + Navigate to `[S:] SYSNAND VIRTUAL`
  + Press (Y) to paste `gbavc.sav`
  + (A) 버튼을 눌러 주세요.
  + (Start) 버튼을 눌러 기기를 재시작해 주세요.
1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. (A) 버튼을 눌러 GodMode9를 실행해 주세요.

##### Section VII - Backup SysNAND

1. Press (Home) to bring up the action menu
1. Select "More..."
1. Select "Backup NAND"
1. (A) 버튼을 눌러 진행하세요.
1. (R) 버튼과 (B) 버튼을 동시에 누른 후 SD 카드를 빼세요.
1. SD 카드를 컴퓨터에 삽입해 주세요.
1. SD 카드 최상단 `/gm9out/` 폴더의 `nand.bin` 파일을 컴퓨터의 안전한 장소로 복사해 주세요.
  + If you previously used SafeCTRTransfer and have a NAND backup named `<serialnumber>_nand.bin`, replace it with this one (rename `nand.bin` to match `<serialnumber>_nand.bin`)
  + Make backups in multiple locations (such as online file storage)
  + 나중에 문제가 생겨 벽돌이 되었을 때 이 백업으로 기기를 살릴 수 있습니다.
1. Delete `nand.bin` from the `/gm9out/` folder on your SD card after copying it
1. **SD 카드의 모든 파일을 컴퓨터에 백업해두세요. 다음 단계에서 SD 카드의 모든 파일이 삭제됩니다.**

##### 섹션 VIII - SD 카드 포맷

1. SD 카드를 기기에 다시 삽입해 주세요.
1. Press (Home) to bring up the action menu
1. Select "More..."
1. "SD format menu"를 선택하세요.
1. (A) 버튼을 눌러 주세요.
1. "No EmuNAND"를 선택하세요.
1. "Auto"를 선택하세요.
1. Press (A) to accept the label `GM9SD`
  + Optionally, you may input a custom name for the SD card
1. When prompted, input the key combo given to confirm
1. (R) 버튼과 (B) 버튼을 동시에 누른 후 SD 카드를 빼세요.
1. SD 카드를 컴퓨터에 삽입해 주세요.
1. Copy all your files back to your SD card
  + Ensure you replace the `arm9loaderhax.bin` file on your SD card with the one from your backup
1. SD 카드를 기기에 다시 삽입해 주세요.
1. (A) 버튼을 눌러 SD 카드를 다시 마운트하세요.
1. (Start) 버튼을 눌러 저장하고 기기를 재시작하세요.
1. 검은 화면이 보인다면 [이 문제 해결 가이드](troubleshooting#ts_sys_down)를 참고하세요.

___

[arm9loaderhax 설치](installing-arm9loaderhax)로 돌아갑니다.