Guide_3DS/_pages/pl_PL/installing-boot9strap-(homebrew-launcher).txt

41 lines
2 KiB
Text
Raw Normal View History

2017-05-21 22:39:40 +02:00
---
title: "Installing boot9strap (Homebrew Launcher)"
2017-05-21 22:39:40 +02:00
---
If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Zauważ, że terminy EmuNand i RedNAND odnoszą się do nieco innych implementacji [tej samej idei] (http://3dbrew.org/wiki/NAND_Redirection).
#### Instrukcje
2017-09-18 21:28:24 +02:00
##### Section I - Launching SafeB9SInstaller
2017-05-21 22:39:40 +02:00
2017-09-18 21:28:24 +02:00
1. Launch udsploit from the list of homebrew
+ You may have to scroll down to see this option
1. Once it has completed, press (Start) to exit udsploit
2017-05-21 22:39:40 +02:00
+ This may take several tries
2017-09-18 21:28:24 +02:00
+ Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie
1. Launch safehax from the list of homebrew
+ You may have to scroll down to see this option
+ If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie
2017-05-21 22:39:40 +02:00
1. If the exploit was successful, you will have booted into SafeB9SInstaller
2017-06-26 20:11:58 +02:00
##### Section II - Installing boot9strap
2017-05-21 22:39:40 +02:00
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device
2017-05-30 19:27:28 +02:00
2017-06-26 20:11:58 +02:00
##### Sekcja III - Konfiguracja Luma3DS
2017-05-30 19:27:28 +02:00
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie
2017-06-06 23:24:28 +02:00
+ If you get an error, just continue the next page
2017-05-21 22:39:40 +02:00
___
Continue to [Finalizing Setup](finalizing-setup)
2017-09-18 21:28:24 +02:00
{: .notice--primary}