Guide_3DS/_pages/zh_TW/flashing-ntrboot-(nds).txt

58 lines
3.2 KiB
Plaintext
Raw Normal View History

2017-08-17 23:01:39 +02:00
---
title: "寫入 ntrboot 漏洞(透過 NDS"
---
在開始前,請先確保您已閱讀完 [ntrboot](ntrboot) 頁面。
2017-08-18 10:33:24 +02:00
Note that R4i Gold 3DS RTS flashcarts will not be able to be used for their standard functions (such as launching `.nds` files) while the ntrboot exploit is installed on it. This does not apply to the Acekard 2i.
2017-08-17 23:01:39 +02:00
2017-08-18 10:33:24 +02:00
There are optional steps at the end of the ntrboot boot9strap installation instructions to remove the ntrboot exploit from your flashcart when you are done.
This method requires temporary access to a Nintendo DS or Nintendo DS Lite that is compatible with your flashcart. Note that this method is *not* compatible with the Nintendo DSi. It is compatible with the following flashcarts:
+ [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
2017-08-19 08:24:41 +02:00
If you would like to remove the ntrboot exploit and restore your flashcart to its original state, note that you should *not* power off your NDS / NDSL until you have restored your flashcart. This is because the R4i Gold 3DS RTS flashcart cannot be used to launch `.nds` files while the ntrboot exploit is installed on it, so if you exit the flasher application you will not be able to re-enter it.
2017-08-17 23:01:39 +02:00
{: .notice--warning}
請注意,在某些特殊情況下,某些冒牌的燒錄卡很有可能會在過程中變磚,使得燒錄卡變得無法使用。 這是不大可能的,但不論如何,我們只支援寫在相容清單中的燒錄卡。 為了避免您採購燒錄卡時買到了冒牌卡帶,建議您應於較知名且放心的網站上購買您的燒錄卡(如 [NDS Card](http://www.nds-card.com/))。
{: .notice--danger}
#### 必備項目
2017-08-18 10:33:24 +02:00
* Your ntrboot compatible flashcart
2017-08-17 23:01:39 +02:00
* 兩台主機
+ **始源 NDS / NDSL 主機**:一台可搭配您的燒錄卡使用的任天堂 DS 或 DS Lite 主機
+ **3DS 目標機**:一台已搭載原廠系統的 3DS 系列主機
2017-08-18 10:33:24 +02:00
* The latest release of [ak2i_ntrcardhax_flasher](https://github.com/d3m3vilurr/ak2i_ntrcardhax_flasher/releases/latest) *(standard flasher; not the `dsi` flasher)*
2017-08-17 23:01:39 +02:00
#### 操作說明
##### 第一節 — 準備工作
1. 將 **NDS / NDSL 始源機** 關機
1. 將燒錄卡的 SD 卡插入電腦
1. 將 `ak2i_ntrcardhax_flasher.nds` 複製到您燒錄卡的 SD 卡中
1. 重新插入 SD 卡進您的燒錄卡中
1. 將相容於 ntrboot 的 DS / DSi 燒錄卡插入於 **NDS / NDSL 始源機** 中
##### 第二節 — 寫入 ntrboot
1. 透過您的燒錄卡在 **NDS / NDSL 始源機** 上啟動 `ak2i_ntrcardhax_flasher.nds`
1. 按「A」 繼續
1. 按「X」選擇「load flashrom」
1. 按「A」 繼續
1. 從您的 **NDS / NDSL 始源機**中退出燒錄卡
1. 從您的燒錄卡中移除 SD 卡
1. 將未插入 SD 卡的燒錄卡插回至 **NDS / NDSL 始源機**中
1. 按「A」 繼續
1. 按「A」選擇「inject ntrboothax」
1. 按「A」選擇「RETAIL」
1. 從您的 **NDS / NDSL 始源機**中退出燒錄卡
若您想要在安裝 **3DS 目標機**上安裝完 boot9strap 並將您的燒錄卡還原至原始狀態,*千萬不要*在還原燒錄卡前關閉您的 **NDS 或 NDSL 始源機**。
___
繼續至[安裝 boot9strap透過 ntrboot](installing-boot9strap-(ntrboot))
{: .notice--primary}