Guide_3DS/_pages/en_US/installing-boot9strap-(safeb9sinstaller).txt

42 lines
1.9 KiB
Text
Raw Normal View History

2017-05-21 22:39:40 +02:00
---
title: "Installing boot9strap (SafeB9SInstaller)"
2017-05-21 22:39:40 +02:00
---
2017-09-28 23:42:38 +02:00
{% include toc title="Table of Contents" %}
### Instructions
2017-05-21 22:39:40 +02:00
2017-09-28 23:42:38 +02:00
#### Section I - Launching SafeB9SInstaller
2017-05-21 22:39:40 +02:00
1. Launch udsploit from the list of homebrew
1. Once you see `patching kernel... done`, press (Start) to exit udsploit
2017-05-21 22:39:40 +02:00
+ This may take several tries
+ If it freezes, just force the console to power off by holding the power button, then try again
1. Launch safehax from the list of homebrew
+ If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ If it freezes, just force the console to power off by holding the power button, then try again
2017-05-21 22:39:40 +02:00
1. If the exploit was successful, you will have booted into SafeB9SInstaller
2017-09-28 23:42:38 +02:00
#### Section II - Installing boot9strap
2017-05-21 22:39:40 +02:00
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device
2017-09-28 23:42:38 +02:00
#### Section III - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
2017-09-28 23:42:38 +02:00
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save and reboot
2017-06-06 08:20:12 +02:00
+ If you get an error, just continue the next page
2017-05-21 22:39:40 +02:00
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
+ Luma3DS does not look any different from the normal HOME menu. If your console has booted into the HOME menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
2017-05-21 22:39:40 +02:00
___
2018-02-18 00:44:48 +01:00
### Continue to [Finalizing Setup](finalizing-setup)
{: .notice--primary}