In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
To accomplish this, we can use the Download Play functionality of the game Mario Kart 7, using a 3DS with custom firmware already installed along with a custom game plugin.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
+
The latest release of unSAFE_MODE (the RELEASE .zip file)
-
Section I - Prep Work (source 3DS)
+
Section I - Hardware Button Check (target 3DS)
+
+
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
+
+
Power on your console
+
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
+
The camera applet should appear
+
+
+
Power off your console
+
+
+
If the camera does not open, you cannot follow this method. Wenn das der Fall ist, trete dem Nintendo Homebrew on Discord Server bei und frage, auf Englisch, nach Hilfe.
+
+
Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
Insert the SD card of your target 3DS in your computer
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
-
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
+
Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
-
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
Eject the SD card and put it in the target 3DS
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
Power on the source 3DS
@@ -644,32 +650,45 @@ window.cookieconsent.initialise({
If the exploit was not successful, power off the source 3DS and target 3DS and start again from the beginning of Section III - kartdlphax
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
-
The console will automatically power off
+
Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
Drücke “OK” um das System-Update zu bestätigen
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
Es gibt kein Update. Dies ist ein Teil des Exploits
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
Drücke “Akzeptieren”, um die Nutzungsbedingungen und Warnhinweise zu akzeptieren
+
Das Update wird irgendwann mit dem Fehlercode 003-1099 fehlschlagen. Dies ist so vorgesehen
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
To accomplish this, we can use the Download Play functionality of the game Mario Kart 7, using a 3DS with custom firmware already installed along with a custom game plugin.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of unSAFE_MODE (the RELEASE .zip file)
-
Section I - Prep Work (source 3DS)
+
Section I - Hardware Button Check (target 3DS)
+
+
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
+
+
Power on your console
+
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
+
The camera applet should appear
+
+
+
Power off your console
+
+
+
If the camera does not open, you cannot follow this method. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
+
+
Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
Saca la tarjeta SD de la computadora y ponla en la 3DS de origen
-
Section II - Prep Work (target 3DS)
+
Section III - Prep Work (target 3DS)
-
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
Inserta la tarjeta SD de la 3DS de destino en tu computadora
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
-
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
+
Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
-
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
Saca la tarjeta SD de la computadora y ponla en la 3DS de destino
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
Enciende la 3DS de origen
@@ -644,32 +650,45 @@ window.cookieconsent.initialise({
If the exploit was not successful, power off the source 3DS and target 3DS and start again from the beginning of Section III - kartdlphax
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
-
The console will automatically power off
+
Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
Press “OK” to accept the update
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
There is no update. This is part of the exploit
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
+
Press “I accept” to accept the terms and conditions
+
The update will eventually fail, with the error code 003-1099. This is intended behaviour
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
On the next page, you will install useful homebrew applications to complete your setup.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
Pour cela, nous pouvons utiliser le mode téléchargement du jeu Mario Kart 7 en utilisant une 3DS avec un custom firmware déjà installé avec un plugin de jeu personnalisé.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
+
The latest release of unSAFE_MODE (the RELEASE .zip file)
-
Section I - Prep Work (source 3DS)
+
Section I - Hardware Button Check (target 3DS)
+
+
In this section, you will see whether your shoulder buttons are working on your console. Cela déterminera la méthode que vous allez suivre sur la page suivante.
+
+
+
Power on your console
+
Une fois arrivé sur le Menu HOME, appuyez sur les boutons (L) et (R) en même temps
+
+
L’applet de l’appareil photo numérique devrait apparaître
+
+
+
Éteignez votre console
+
+
+
If the camera does not open, you cannot follow this method. Si c’est le cas, rejoignez Nintendo Homebrew sur Discord et demandez de l’aide, en anglais.
+
+
Section II - Prep Work (source 3DS)
Dans cette section, vous allez configurer votre 3DS source (la 3DS avec un custom firmware) pour l’envoi des données d’exploit à la 3DS cible.
Retirez la carte SD de l’ordinateur et réinsérez-la dans la 3DS source
-
Section II - Prep Work (target 3DS)
+
Section III - Prep Work (target 3DS)
-
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
Insérez la carte SD de la 3DS cible dans votre ordinateur
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
+
Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
Éjectez la carte SD et réinsérez-la dans la 3DS cible
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
Allumez la 3DS source
@@ -644,32 +650,45 @@ window.cookieconsent.initialise({
Si l’exploit n’a pas réussi, éteignez la 3DS source et la 3DS cible et recommencez à partir du début de Section III - kartdlphax
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
-
The console will automatically power off
+
Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
Appuyez sur “OK” pour accepter la mise à jour
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
Aucune mise à jour n’est nécessaire. Ceci fait partie de l’exploit
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
Appuyez sur « J’accepte » pour accepter les conditions
+
La mise à jour finira par échouer, avec le code d’erreur 003-1099. Ne vous inquiétez pas, c’est normal.
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
@@ -503,15 +504,15 @@ window.cookieconsent.initialise({
Technikai részletek (opcionális)
-
In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
Ennek eléréséhez a Download Play funkcionalitását használjuk a Mario Kart 7-nek, egy egyedi firmware-rel, valamint egy egyedi játék pluginnel már telepített 3DS használatával.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
The latest release of unSAFE_MODE (the RELEASE .zip file)
-
Section I - Prep Work (source 3DS)
+
Section I - Hardware Button Check (target 3DS)
+
+
Ebben a fejezetben tesztelni fogod azt, hogy működnek-e a váll gombok a konzolodon. Ez meghatározza, hogy melyik metódust kell követned a következő oldalon.
+
+
+
Kapcsold be a konzolod
+
Mikor meglátod a Home menüt, nyomd meg az (Bal váll) és (Jobb váll) gombokat egyszerre
+
+
A kamera applettnek kell megjelennie
+
+
+
Kapcsold ki a konzolod
+
+
+
If the camera does not open, you cannot follow this method. Ebben az esetben csatlakozz a Nintendo Homebrew-hoz Discord-on és kérj, támogatást angolul.
+
+
Section II - Prep Work (source 3DS)
Ebben a fejezetben befogod állítani a forrás 3DS-ed (a 3DS egyedi firmware-rel), hogy küldje az exploit adatot a cél 3DS-nek.
Távolítsd el az SD kártyát és rakd be a forrás 3DS-be
-
Section II - Prep Work (target 3DS)
+
Section III - Prep Work (target 3DS)
-
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
Csatlakoztasd a cél 3DS SD kártyáját a számítógépedhez
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
-
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
+
Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
-
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
Távolítsd el az SD kártyát és rakd be a cél 3DS-be
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
Kapcsold be a forrás 3DS-t
@@ -641,32 +647,45 @@ window.cookieconsent.initialise({
Ha az exploit nem volt sikeres, kapcsold ki a forrás 3DS-t és a cél 3DS-t, és kezd újra a III. rész - kartdlphax kezdetétől
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
A konzolod kikapcsolt állapotában tartsd nyomva a következő gombokat: (Bal Váll) + (Jobb Váll) + (D-Pad Fel) + (A), majd ezen gombok nyomva tartása mellett kapcsold be a konzolod
-
The console will automatically power off
+
Tartsd nyomva a gombokat, amíg a konzol be nem bootol a Safe Mode-ba (a “system update” menübe)
-
Kapcsold be a konzolod
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
Nyomj “OK”-ot a frissítés elfogadásához
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
Nincs frissítés. Ez része az exploitnak
-
Ha az exploit sikeres volt, a konzolodnak ezt követően be kell bootolnia a Homebrew Launcherbe
-
Launch nimdsphax from the list of homebrew
-
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
Nyomj az “I accept”-re a feltételek elfogadásához
+
A frissítés sikertelen lesz a 003-1099 hibakóddal. Ez az elvárt viselkedés
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
Per farlo possiamo utilizzare la funzionalità “Modalità download” del gioco Mario Kart 7, utilizzando un 3DS con custom firmware già installato insieme a un plugin di gioco personalizzato.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
+
The latest release of unSAFE_MODE (the RELEASE .zip file)
-
Section I - Prep Work (source 3DS)
+
Section I - Hardware Button Check (target 3DS)
+
+
In questa sezione verificherai se i pulsanti dorsali della tua console funzionano. Serve per determinare quale metodo seguirai nella prossima pagina.
+
+
+
Accendi la tua console
+
Nel menu HOME premi contemporaneamente i pulsanti L e R
+
+
L’applicazione fotocamera dovrebbe apparire
+
+
+
Spegni la tua console
+
+
+
If the camera does not open, you cannot follow this method. In tal caso, puoi ricevere assistenza chiedendo, in inglese, nel canale Discord di Nintendo Homebrew.
+
+
Section II - Prep Work (source 3DS)
In questa sezione configurerai il tuo 3DS di partenza (il 3DS con custom firmware) per inviare i dati dell’exploit verso il 3DS di destinazione.
Rimuovi la scheda SD e inseriscila nel 3DS di partenza
-
Section II - Prep Work (target 3DS)
+
Section III - Prep Work (target 3DS)
-
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
Inserisci la scheda SD del tuo 3DS di destinazione nel computer
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
+
Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
Rimuovi la scheda SD e inseriscila nel 3DS di destinazione
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
Accendi il 3DS di partenza
@@ -644,32 +650,45 @@ window.cookieconsent.initialise({
Se l’exploit non ha avuto successo, spegni il 3DS di partenza e il 3DS di destinazione e ricomincia dall’inizio di Sezione III - kartdlphax
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché, tenendo premuti i pulsanti, accendi la console
-
The console will automatically power off
+
Mantieni premuti i pulsanti finché la console si avvierà in Modalità Provvisoria (una specie di menu per aggiornare il sistema)
-
Accendi la tua console
-
Clicca sull’icona di impostazioni del menu HOME nell’angolo in alto a sinistra dello schermo inferiore ()
+
Premi “OK” per accettare l’aggiornamento
-
Se la console si blocca per un po’ e poi crasha, assicurati di avere il file Launcher.dat nella directory principale della tua scheda SD
+
Non c’è alcun aggiornamento. Fa parte del procedimento
-
Se l’exploit ha avuto successo, la tua console avrà avviato l’Homebrew Launcher
-
Avvia nimdsphax dalla lista degli homebrew
-
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
Premi “Accetto” per accettare i termini e le condizioni
+
L’aggiornamento fallirà, con codice di errore 003-1099. Questo risultato è corretto
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
This section will reset your system settings to its defaults. Installed games and their save data will not be affected. This is required to prevent known issues relating to extended memory mode and applets on some consoles.
+
이 섹션에서는 시스템 설정을 기본값으로 복구하게 됩니다. Installed games and their save data will not be affected. This is required to prevent known issues relating to extended memory mode and applets on some consoles.
@@ -503,15 +504,15 @@ window.cookieconsent.initialise({
기술적 상세 정보 (선택 사항)
-
In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
이 취약점을 사용하기 위해, 마리오 카트 7 게임에 존재하는 다운로드 플레이 기능, 이미 커스텀 펌웨어가 설치되어 있는 콘솔, 그리고 어떤 게임 플러그인을 사용합니다.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
타겟 3DS의 SD 카드를 컴퓨터에 삽입해 주세요
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
-
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
+
Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
-
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
SD 카드를 분리해 타겟 3DS에 장착해 주세요
-
+
Section IV - kartdlphax
-
-
-
섹션 III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
소스 3DS의 전원을 켜 주세요
@@ -644,32 +650,45 @@ window.cookieconsent.initialise({
익스플로잇이 실패했다면, 두 3DS 콘솔 모두 종료한 후 섹션 III - kartdlphax의 처음부터 다시 시작해 주세요
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
섹션 IV - menuhax67 설치
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
전원이 꺼져 있는 상태에서 (L 어깨) + (R 어깨) + (십자 Up) + (A) 를 길게 눌르고, 누르는 상태에서 전원을 켜 주세요
-
The console will automatically power off
+
안전 모드로 부팅 될 때 까지 버튼들을 눌러 주세요 (“본체 업데이트” 메뉴)
-
콘솔의 전원을 켜 주세요
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
“OK”를 선택해서 업데이트를 확인해 주세요
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
실제로 업데이트를 하는 것은 아닙니다. 이것은 익스플로잇의 일부입니다
-
익스플로잇이 성공적이었다면 Homebrew Launcher로 부팅되었을 것입니다
-
홈브류 목록에서 nimdsphax를 실행해 주세요
-
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
+
“동의함”를 눌러서 이용 약관에 동의해 주세요
+
이 업데이트는 에러 코드 003-1099 와 같이 실패를 할 겁니다. 이것은 의도적 행동입니다
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
This section will reset your system settings to its defaults. Installed games and their save data will not be affected. This is required to prevent known issues relating to extended memory mode and applets on some consoles.
+
이 섹션에서는 시스템 설정을 기본값으로 복구하게 됩니다. Installed games and their save data will not be affected. This is required to prevent known issues relating to extended memory mode and applets on some consoles.
In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
To accomplish this, we can use the Download Play functionality of the game Mario Kart 7, using a 3DS with custom firmware already installed along with a custom game plugin.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
+
The latest release of unSAFE_MODE (the RELEASE .zip file)
-
Section I - Prep Work (source 3DS)
+
Section I - Hardware Button Check (target 3DS)
+
+
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
+
+
Zet je console aan
+
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
+
The camera applet should appear
+
+
+
Zet je console uit
+
+
+
If the camera does not open, you cannot follow this method. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
+
+
Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
Plaats de SD-kaart van je doel 3DS in je computer
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
+
Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
Haal de SD-kaart uit en stop deze in de doel 3DS
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
Zet de bron 3DS aan
@@ -644,32 +650,45 @@ window.cookieconsent.initialise({
If the exploit was not successful, power off the source 3DS and target 3DS and start again from the beginning of Section III - kartdlphax
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
-
The console will automatically power off
+
Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
-
Zet je console aan
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
Druk op “OK” om de update te accepteren
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
Er is geen update. Dit is deel van de exploit
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
+
Press “I accept” to accept the terms and conditions
+
The update will eventually fail, with the error code 003-1099. Dit is verwacht gedrag
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
On the next page, you will install useful homebrew applications to complete your setup.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
Para fazer isso, podemos usar a funcionalidade Download Play do jogo Mario Kart 7, usando um 3DS com custom firmware já instalado junto com um plugin personalizado de jogo.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
Insira o cartão SD do seu 3DS de destino no seu computador
Copie o boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do cartão SD do 3DS de destino
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
-
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
+
Copy boot9strap.firm and boot9strap.firm.sha from the RELEASE .zip to the /boot9strap/ folder on your SD card
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
Ejete o cartão SD e coloque-o no 3DS de destino
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
Ligue o 3DS de origem
@@ -644,32 +650,45 @@ window.cookieconsent.initialise({
Se o exploit falhar, desligue o 3DS de origem e o 3DS de destino e comece novamente desde o início da Seção III - kartdlphax
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
Com o seu console ainda desligado, segure os seguintes botões: (Gatilho Esquerdo) + (Gatilho Direito) + (D-Pad para Cima) + (A), e enquanto segura esses botões juntos, ligue seu console
-
The console will automatically power off
+
Continue segurando os botões até o console iniciar no Modo de Segurança (um menu de “atualização do sistema”)
-
Ligue o seu console
-
Toque no pequeno ícone de configurações do Menu HOME no canto superior esquerdo da tela inferior ()
+
Pressione “OK” para aceitar a atualização
-
Se o console congelar por um tempo e depois acontecer um crash, certifique-se de ter Launcher.dat na raiz do seu cartão SD
+
Não há atualização. Isto faz parte do exploit
-
Se o exploit foi bem sucedido, seu console irá iniciar no Homebrew Launcher
-
Abra o nimdsphax da lista de homebrews
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
Pressione “Eu aceito” para aceitar os termos e condições
+
A atualização eventualmente falhará, com o código de erro 003-1099. Isto é intencional
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
The latest release of unSAFE_MODE (the RELEASE .zip file)
-
Section I - Prep Work (source 3DS)
+
Section I - Hardware Button Check (target 3DS)
+
+
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
+
+
Power on your console
+
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
+
The camera applet should appear
+
+
+
Power off your console
+
+
+
If the camera does not open, you cannot follow this method. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
在你的电脑中插入你的目标 3DS 的 SD 卡
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
取下 SD 卡并将其插回目标 3DS
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
-
The console will automatically power off
+
Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
Press “OK” to accept the update
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
There is no update. This is part of the exploit
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的话,你将自动进入 SafeB9SInstaller
+
Press “I accept” to accept the terms and conditions
+
The update will eventually fail, with the error code 003-1099. This is intended behaviour
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
On the next page, you will install useful homebrew applications to complete your setup.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
In order to install custom firmware on our console, we need to get Homebrew Launcher access.
+
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
To accomplish this, we can use the Download Play functionality of the game Mario Kart 7, using a 3DS with custom firmware already installed along with a custom game plugin.
-
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
+
This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject the exploited WiFi profile into your connections list.
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
+
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
-
See here for information about kartdlphax, here for information about menuhax67, and here for information about nimdsphax.
+
For a more technical explanation, see the following links for information on the kartdlphax and unSAFE_MODE exploits: kartdlphax, unSAFE_MODE.
The latest release of Luma3DS (the Luma3DS .zip file)
+
The latest release of unSAFE_MODE (the RELEASE .zip file)
-
Section I - Prep Work (source 3DS)
+
Section I - Hardware Button Check (target 3DS)
+
+
In this section, you will see whether your shoulder buttons are working on your console. This will determine which method you will follow on the next page.
+
+
+
Power on your console
+
Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+
+
The camera applet should appear
+
+
+
Power off your console
+
+
+
If the camera does not open, you cannot follow this method. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
+
+
Section II - Prep Work (source 3DS)
In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
In this section, you will set up the files that the target 3DS will need to install custom firmware.
+
In this section, you will copy the files needed to trigger the unSAFE_MODE exploit onto your target 3DS (the 3DS that you are trying to modify)’s SD card.
Insert the SD card of your target 3DS in your computer
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of the target 3DS’s SD card
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax.zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
+
Copy usm.bin from the RELEASE .zip to the root of your SD card
+
Create a folder called 3ds on the root of your SD card
+
Copy slotTool.3dsx from the slotTool folder inside the RELEASE .zip to the /3ds/ folder on your SD card
Eject the SD card and put it in the target 3DS
-
+
Section IV - kartdlphax
-
-
-
Section III - kartdlphax
-
-
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
+
In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to overwrite your Wi-Fi slots with hacked data. Your Wi-Fi connection settings will be temporarily overwritten while the exploit is active.
Power on the source 3DS
@@ -644,32 +650,45 @@ window.cookieconsent.initialise({
If the exploit was not successful, power off the source 3DS and target 3DS and start again from the beginning of Section III - kartdlphax
+
Press (X) to inject unSAFE_MODE
+
If the injection was successful, the screen will turn green and the target 3DS will automatically power off
+
+
If the screen turns red, power off the target 3DS and start again from the beginning of Section III - kartdlphax. If this doesn’t work, ask for help at Nintendo Homebrew on Discord)
+
+
-
Section IV - Installing menuhax67
+
You will not need to use your source 3DS to complete any further steps on this guide. Any further steps should only be completed on the target 3DS.
+
+
Section V - unSAFE_MODE
+
+
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
-
Press (Y) + (D-Pad Down) to install menuhax67
+
With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
-
The console will automatically power off
+
Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
+
Press “OK” to accept the update
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
There is no update. This is part of the exploit
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的話,您將自動進入 SafeB9SInstaller
+
Press “I accept” to accept the terms and conditions
+
The update will eventually fail, with the error code 003-1099. This is intended behaviour
+
When asked “Would you like to configure Internet settings?”, select “Yes”
+
On the following menu, navigate to Connection 1 -> Change Settings -> Next Page (right arrow) -> Proxy Settings -> Detailed Setup (image)
+
If the exploit was successful, your console will have booted into SafeB9SInstaller
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
+
If your console instead freezes on a red screen, you are missing usm.bin from the root of your SD card
On the next page, you will install useful homebrew applications to complete your setup.
-
Section VI - Removing menuhax67
+
Section VII - Restoring WiFi Configuration Profiles
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
+
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.