New Crowdin translations (#1127)

_data/navigation/zh_TW.yml

@@ -22,7 +22,7 @@ bottom:
   - 
     title: '若需英語支援，請於 <a href="https://discord.gg/MWxPgEp">Discord 上的 Nintendo Homebrew 伺服器</a>發問。'
   - 
-    title: '如果你喜歡本教學，我很樂意接受<a href="https://donorbox.org/plailect"> Donorbox </a> 或 <a href="bitcoin:1Ad3PnU6TmJxvJ62LobgMw5uT8hR1LQety">比特幣</a>的 <a href="donations">捐贈</a>。'
+    title: '如果您喜歡本教學，我很樂意接受<a href="https://donorbox.org/plailect"> Donorbox </a> 或 <a href="bitcoin:1Ad3PnU6TmJxvJ62LobgMw5uT8hR1LQety">比特幣</a>的 <a href="donations">捐贈</a>。'
 footer:
   - 
     title: 來源

_pages/af_ZA/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/af_ZA/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: en
+lang: en
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/af_ZA/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/ar_SA/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/ar_SA/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: en
+lang: en
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/ar_SA/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/ca_ES/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Premeu (A) per confirmar
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/ca_ES/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: ca
+lang: ca
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/ca_ES/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Premeu (A) per confirmar
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/cs_CZ/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/cs_CZ/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: en
+lang: en
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/cs_CZ/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/da_DK/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/da_DK/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: en
+lang: en
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/da_DK/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/de_DE/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Starte die Gesundheits & Sicherheitsinformationen-Anwendung (Welche jetzt FBI ist.)
 1. Navigiere zu `SD` -> `cias`
 1. Wähle "\<current directory>"
-1. Wähle die "Installiere alle CIAs" Option aus und drücke (A) zum bestätigen
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Drücke (HOME), um FBI zu verlassen
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Drücke (B), um zum Hauptmenü zurückzukehren
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Drücke (A), um zu bestätigen
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Drücke zweimal (B), um zurück in das Hauptmenü zu gelangen
 1. Drücke  (HOME) um das Aktionsmenü aufzurufen
 1. Wähle "More..."
 1. Wähle "Backup NAND"

_pages/de_DE/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: de
+lang: de
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/de_DE/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Drücke (B), um zum Hauptmenü zurückzukehren
 1. Navigiere zu `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Drücke (B), um zum Hauptmenü zurückzukehren
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Drücke (A), um zu bestätigen
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/el_GR/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Επιλέξτε "\<current directory>"
-1. Επιλέξτε την επιλογή "Install all CIAs" και πατήστε (A) για επιβεβαίωση
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Πατήστε (A) για επιβεβαίωση
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/el_GR/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: el
+lang: el
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/el_GR/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Πατήστε (A) για επιβεβαίωση
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/en_PT/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/en_PT/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: en
+lang: en
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/en_PT/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/es_ES/updating-to-boot9strap.txt

@@ -104,12 +104,14 @@ Si, antes de actualizar a boot9strap, ya tenías una configuración EmuNAND y de
 1. Presiona (B) para volver al menú principal
 1. Ve a `[0:] SDCARD`
 1. Presiona (Y) sobre la carpeta `luma` para copiarla
+  + Si tienes archivos o carpetas *distintos* de los que estaban en una versión anterior a esta guía (`config.bin` y `payloads`) en tu carpeta `luma` (como los archivos de LayeredFS), deberías tan solo copiar `config.bin` y `payloads` marcándolos con (L), y presionando (Y) para copiarlos
 1. Presiona (B) para volver al menú principal
 1. Ve a `[1:] SYSNAND CTRNAND` -> `rw`
 1. Presiona (X) en la carpeta `luma` existente para borrarla
   + Si no tienes esta carpeta, tan sólo prosigue con las instrucciones
 1. Presiona (A) para confirmar
 1. Presiona (Y) para pegar una copia de la carpeta `luma` desde tu tarjeta SD
+  + Si anteriormente sólo copiaste `config.bin` y `payloads`, necesitarás crear la carpeta `luma` de forma manual (mantén presionado (R) y pulsando (Y) Al mismo tiempo, da el nombre `luma`, luego presiona (A) para confirmar), luego ve a `luma`, y presiona (Y) para pegar `config.bin` y `payloads`
 1. Presiona (Start) para reiniciar
 
 ##### Section V - Instalar Luma3DS Updater

_pages/fi_FI/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Avaa terveys- ja turvaohjeet (Health and Safety), joka on nyt FBI
 1. Mene hakemistoon `SD` → `cias`
 1. Valitse "\<current directory>"
-1. Valitse "Install all CIAs" ja paina (A):ta vahvistaaksesi
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Paina (HOME)-painiketta ja sulje FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Paina (B):tä palataksesi päävalikkoon
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Paina (A):ta vahvistaaksesi
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Paina (B):tä kahdesti palataksesi päävalikkoon
 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon
 1. Valitse "More..."
 1. Valitse "Backup NAND"

_pages/fi_FI/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: fi
+lang: fi
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/fi_FI/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Paina (B):tä palataksesi päävalikkoon
 1. Mene hakemistoon `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Paina (B):tä palataksesi päävalikkoon
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Paina (A):ta vahvistaaksesi
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/fr_FR/404.txt

@@ -1,5 +1,5 @@
 ---
-title: "Page Not Found" #
+titre: "Page Introuvable" #
 layout: single-no-ads
 excerpt: "Page introuvable. Vos pixels sont dans un autre canevas." #
 sitemap: false

_pages/fr_FR/finalizing-setup.txt

@@ -1,5 +1,5 @@
 ---
-title: "Finalizing Setup"
+title: "Finalisation de l'installation"
 ---
 
 #### Vue d'ensemble
@@ -80,10 +80,10 @@ Durant cette étape, nous allons également configurer les programmes suivants :
 
 ### Section III - Mise à jour du système
 
-If, while following a previous version of this guide, you CTRTransfered your *New 3DS* to 2.1.0, now is the time to [restore your NAND backup](godmode9-usage#nand_restore) before doing this section.
+Si, vous avez suivi une version précédente de ce guide, vous avez CTRTransférer votre *New 3DS* en 2.1.0, il est maintenant temps de [restaurer votre sauvegarde de la NAND](godmode9-usage#nand_restore) avant de faire cette section.
 {: .notice--danger}
 
-If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section.
+Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vous souhaitez transférer le contenu de votre précédent EmuNAND sur votre nouvelle SysNAND CFW, il est temps de [Suivre Transférer EmuNAND](move-emunand) avant de suivre cette section.
 {: .notice--info}
 
 1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour du Système"
@@ -93,7 +93,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section IV - Injection de FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Redémarrer en appuyant sur (Start) pendant le démarrage pour lancer GodMode9
 1. Naviguez vers `[0:] SDCARD` -> `cias`
 1. Appuyez sur (A) sur `FBI.cia` pour le sélectionner, puis choisissez "CIA image options...", puis "Mount image to drive"
 1. Appuyez sur (A) sur le fichier avec l'extension `.app`, puis sélectionnez "NCCH image options", puis "Inject to H&S"
@@ -107,17 +107,17 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Lancez Informations sur la santé et la sécurité (qui contient désormais FBI)
 1. Naviguez vers `SD` -> `cias`
 1. Sélectionnez "\<current directory>"
-1. Sélectionnez l'option "install all CIAs" (installez toutes les CIAs), appuyez ensuite sur (A) pour confirmer votre choix
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Appuyez sur (Home) pour quitter FBI
 
 ##### Section VI - DSP Dump
 
 1. Lancer DSP1
-1. Once it has completed, press (B) to self-delete the app and return to the home menu
+1. Une fois que c'est fini, presser (B) pour arrêter l'application et retourner au menu Home
 
 ##### Section VII - Restaurer Informations sur la santé et la sécurité
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Redémarrer en appuyant sur (Start) pendant le démarrage pour lancer GodMode9
 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
 1. Sélectionnez "More..."
 1. Sélectionnez "Restore H&S"
@@ -135,17 +135,14 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Appuyez sur (A) pour autoriser l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
 1. Appuyez sur (B) pour revenir au menu principal
 1. Naviguez vers `[0:] SDCARD`
-1. Press (Y) on the `luma` folder to copy it
+1. Appuyez sur (Y) en sélectionnant `luma` pour le copier
 1. Appuyez sur (B) pour revenir au menu principal
 1. Naviguez vers `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
+1. Appuyez sur (Y) pour coller le dossier `luma` dans votre carte SD
-  + If you do not have this folder, just proceed with the instructions
-1. Appuyez sur (A) pour confirmer
-1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ### Section IX - Sauvegarde de la NAND
 
-1. Press (B) until you get to the main menu
+1. Appuyez deux fois sur (B) pour revenir au menu principal
 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
 1. Sélectionnez "More..."
 1. Sélectionnez "Backup NAND"

_pages/fr_FR/site-navigation.txt

@@ -1,5 +1,5 @@
 ---
-title: "Site Navigation" #
+title: "Index"#
 layout: single-no-ads
 sitemap: false
 ---

_pages/fr_FR/troubleshooting.txt

@@ -172,7 +172,7 @@ Si une erreur se produit pendant le processus de SafeCTRTransfer, il vous sera d
 1. Appuyez sur (Y) pour copier les fichiers
 1. Appuyez deux fois sur (B) pour revenir au menu principal
 1. Naviguez vers `[S:] SYSNAND VIRTUAL`
-1. Press (Y) to paste a copy of `firm0firm1.bak` and `sector0x96.bak`
+1. Appuyez sur (Y) pour coller une copie de `firm0firm1.bak` et `sector0x96.bak`
 1. Appuyez sur (A) pour confirmer
 1. Appuyez sur (A) pour injecter les fichiers
 1. Appuyez sur (A) pour déverrouiller l'écriture sur la SysNAND

_pages/fr_FR/updating-to-boot9strap.txt

@@ -1,5 +1,5 @@
 ---
-title: "Updating to boot9strap"
+title: "Mettre à jour vers boot9strap"
 ---
 
 Cette page est faite pour que les utilisateurs actuels de arm9loaderhax puissent mettre à jour leurs consoles vers boot9strap.
@@ -8,7 +8,7 @@ Cette page est faite pour que les utilisateurs actuels de arm9loaderhax puissent
 Toutes les futures versions de Luma3DS ne seront faites qu'exclusivement dans le format ".firm", lequel ne sera compatible qu'boot9strap et sighax. Cela veut dire que pour pouvoir recevoir les dernières mises à jour de Luma3DS, vous devez utiliser cette page pour mettre à jour votre installation.
 {: .notice--info}
 
-If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you *either* temporarily disable your PIN (you can re-enable the PIN after the update), *or* download the `aeskeydb.bin` file below.
+Si vous avez un code PIN d'actif sur Luma3DS, SafeB9SInstaller vous donnera l'erreur "OTP Crypto Fail" tant que vous n'aurez pas désactiver votre code PIN (vous pouvez le réactiver après la mise à jour) *ou* télécharger le fichier `aeskeydb.bin` ci-dessous.
 {: .notice--warning}
 
 Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
@@ -19,15 +19,15 @@ Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(s
 Notez que le fichier requis nommé `secret_sector.bin` est le même que celui se trouvant dans les différentes versions du fichier `data_input.zip`. Si vous avez déjà ce fichier sur votre disque quelque part, vous pouvez utiliser celui-là au lieu de télécharger celui se trouvant sur cette page.
 {: .notice--info}
 
-Note that, on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console. If you do not have a New 3DS, you do not need `secret_sector.bin`.
+Notez que, sur New 3DS, `secret_sector.bin` est nécessaire pour revenir sur l'exploit arm9loaderhax, c'est pourquoi il est pas nécessaire pour l'installation de boot9strap sur une console non-modifiée. Si vous n'avez pas de New 3DS, vous n'avez pas besoin de `secret_sector.bin`.
 {: .notice--info}
 
-Note that the the following required file named `aeskeydb.bin` is *not* the same one that was previously used in this guide. It is required to remove the software "3DSafe" as it allows SafeB9SInstaller to retrieve your console unique OTP. This guide has never instructed you to install "3DSafe", so if you do not remember installing it, you most likely do not have it and do not need `aeskeydb.bin`.
+Notez que le fichier suivant requis nommé `aeskeydb.bin` n'est *pas* le même que celui précédemment utilisé dans ce guide. Il est nécessaire de supprimer le logiciel "3DSafe" pour qu'il permette à SafeB9SInstaller de récupérer l'OTP de votre console. Ce guide nous a jamais appris à installer "3DSafe", donc si vous ne vous rappeler l'avoir installer, vous ne devez probablement pas l'avoir et vous n'avez pas besoin de `aeskeydb.bin`.
 {: .notice--info}
 
-* <i class="fa fa-magnet" aria-hidden="true" title="Ceci est un lien magnet. Use a torrent client to download the file."></i> - **"3DSafe" Users Only:** [`aeskeydb.bin`](magnet:?xt=urn:btih:621f8af00638cb2b00d5bd0c6816543fa00b5fb1&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce)
+* <i class="fa fa-magnet" aria-hidden="true" title="Ceci est un lien magnet. Utilisez un client torrent pour télécharger le fichier."></i> - **"3DSafe" Utilisateurs seulement:** [`aeskeydb.bin`](magnet:?xt=urn:btih:621f8af00638cb2b00d5bd0c6816543fa00b5fb1&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce)
-  + **Note that this file will also fix the error "OTP Crypto Fail" for anyone who encounters it (with or without "3DSafe" installed), such as users with a Luma3DS PIN enabled**
+  +**Notez que ce fichier va également corrigé l'erreur "OTP Crypto Fail" pour ceux qui la rencontrent (avec ou sans "3DSafe" d'installé), tel que les utilisateurs avec un code PIN d'activé sur Luma3DS**
-* <i class="fa fa-magnet" aria-hidden="true" title="Ceci est un lien magnet. Use a torrent client to download the file."></i> - **New 3DS Only:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
+* <i class="fa fa-magnet" aria-hidden="true" title="Ceci est un lien magnet. Utilisez un client torrent pour télécharger le fichier."></i> - **New 3DS Utilisateurs seulement:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
 * La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(le fichier `.7z`)*
 * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest)
@@ -49,9 +49,9 @@ Note that the the following required file named `aeskeydb.bin` is *not* the same
 1. Copiez `SafeB9SInstaller.bin` du dossier SafeB9SInstaller `.zip` vers le dossier `/luma/payloads/` de votre carte SD
 1. Renommez `SafeB9SInstaller.bin` dans le dossier `/luma/payloads/` de votre carte SD en `start_SafeB9SInstaller.bin`
 1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD
-1. **New 3DS Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
+1. **New 3DS Seulement:** Copier `secret_sector.bin` dans le dossier `/boot9strap/` sur votre carte SD
-1. **"3DSafe" Users Only:** Copy `aeskeydb.bin` to the `/boot9strap/` folder on your SD card
+1. **Utilisateurs "3DSafe" Seulement:** Copier `aeskeydb.bin` dans le dossier `/boot9strap/` sur votre carte SD
-  + **Note that this file will also fix the error "OTP Crypto Fail" for anyone who encounters it (with or without "3DSafe" installed), such as users with a Luma3DS PIN enabled**
+  +**Notez que ce fichier va également corrigé l'erreur "OTP Crypto Fail" pour ceux qui la rencontrent (avec ou sans "3DSafe" d'installé), tel que les utilisateurs avec un code PIN d'activé sur Luma3DS**
 
     ![]({{ base_path }}/images/screenshots/updating-to-b9s-file-layout.png)
     {: .notice--info}
@@ -81,7 +81,7 @@ Cette section est nécessaire uniquement si le menu de configuration de Luma3DS
 
 ##### Section IV - CTRNAND Luma3DS
 
-If, before updating to boot9strap, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section.
+Si, avant d'avoir mis à jour vers boot9strap, vous aviez déjà une installation EmuNAND et que vous voulez transférer le contenue de votre précédente EmuNAND vers votre nouvelle SysNAND CFW, il est temps de [Suivre Transférer l'EmuNAND](move-emunand) avant de faire cette section.
 {: .notice--info}
 
 1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
@@ -101,13 +101,15 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Appuyez sur (A) pour confirmer
 1. Appuyez sur (B) pour revenir au menu principal
 1. Naviguez vers `[0:] SDCARD`
-1. Press (Y) on the `luma` folder to copy it
+1. Appuyez sur (Y) en sélectionnant `luma` pour le copier
+  + Si vous avez des fichiers ou dossiers *autre que* ceux provenant d'une version antérieur de ce guide (`config.bin` et `payloads`) dans votre répertoire `luma` (tel que les fichiers LayeredFS), vous devriez simplement copier `config.bin` et `payloads` en les marquant avec la gâchette (L), puis appuyez sur ( Y) pour copier
 1. Appuyez sur (B) pour revenir au menu principal
 1. Naviguez vers `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
+1. Appuyez sur (X) sur le dossier `luma` pour le supprimer
-  + If you do not have this folder, just proceed with the instructions
+  + Si vous n'avez pas ce dossier, suivez simplement les instructions
 1. Appuyez sur (A) pour confirmer
-1. Press (Y) to paste a copy of the `luma` folder from your SD card
+1. Appuyez sur (Y) pour coller le dossier `luma` dans votre carte SD
+  + Si vous avez seulement copier `config.bin` et `payloads` plus tôt, vous allez devoir créer le dossier `luma` manuellement (maintenez la gâchette (R) et appuyer sur (Y) en même temps, nommer le `luma`, appuyer ensuite sur (A) pour confirmer), naviguer ensuite vers `luma`, appuyez ensuite sur (Y) pour coller `config.bin` et `payloads`
 1. Appuyez sur (Start) pour redémarrer la console
 
 ### Section V - Installation de Luma3DS Updater

_pages/fr_FR/why-ads.txt

@@ -1,5 +1,5 @@
 ---
-title: "Why Ads?" #
+title: "Pourquoi des Pubs?" #
 layout: single-no-ads
 ---
 

_pages/he_IL/404.txt

@@ -1,5 +1,5 @@
 ---
-title: "Page Not Found" #
+title: "הדף לא נמצא" #
 layout: single-no-ads
 excerpt: "עמוד לא נמצא. הפיקסלים שלך נמצאים בדף אחר." #
 sitemap: false

_pages/he_IL/cart-update.txt

@@ -1,5 +1,5 @@
 ---
-title: "Cart Update"
+title: "עדכון עם משחק פיזי"
 ---
 
 כל עותק של משחק כולל בתוכו את העדכון מערכת שצריך על מנת להפעיל אותו, אשר נותן לכל מי שעל גרסא נמוכה להשתמש במשחק כדי לעדכן לגירסה הזאת (אפילו ללא חיבור לאינטרנט).

_pages/he_IL/credits.txt

@@ -1,5 +1,5 @@
 ---
-title: "Credits"
+title: "תודות"
 ---
 
 **תודות מיוחדות לכל [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) על היותכם מדהימים!**

_pages/he_IL/donations.txt

@@ -1,5 +1,5 @@
 ---
-title: "Donations" #
+title: "תרומות" #
 layout: single-no-ads
 ---
 

_pages/he_IL/faq.txt

@@ -1,5 +1,5 @@
 ---
-title: "FAQ"
+title: "שאלות ותשובות"
 ---
 
 {% capture notice-1 %}

_pages/he_IL/finalizing-setup.txt

@@ -1,5 +1,5 @@
 ---
-title: "Finalizing Setup"
+title: "סיום התהליך"
 ---
 
 #### מעבר על הצעדים
@@ -80,10 +80,10 @@ title: "Finalizing Setup"
 
 ##### חלק III - עדכון המערכת
 
-If, while following a previous version of this guide, you CTRTransfered your *New 3DS* to 2.1.0, now is the time to [restore your NAND backup](godmode9-usage#nand_restore) before doing this section.
+אם, במהלך שעקבתם אחרי גרסה ישנה של המדריך, שנמכתם את ה*New 3DS* שלכם לגרסא 2.1.0, עכשיו זה הזמן [לשחזר את הגיבוי שלכם](godmode9-usage#nand_restore) לפני שאתם עושים את החלק הזה.
 {: .notice--danger}
 
-If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section.
+במקרה שבו לפני החלקת המדריך היה לכם EmuNAND מותקן וברצונכם להעביר את התוכן שלו ל-SysNAND CFW שלכם, עכשיו זה הזמן לבצע [העברת EmuNAND](move-emunand) לפני ביצוע חלק זה.
 {: .notice--info}
 
 1. עדכנו את המכשיר שלכם על ידי לחיצה על System Sttings, לאחר מכן "Other Settings", לכו ימינה עד הסוף ואז לחצו על "System Update"
@@ -93,7 +93,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### חלק IV - הזרקת FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
 1. נווטו אל `[0:] SDCARD` ושם אל `cias`
 1. תלחצו (A) על `FBI.cia` כדי לבחור בו, ואז תבחרו ב "CIA image options...", ושם ב "Mount image to drive"
 1. תלחצו (A) על קובץ ה `.app`, ואז תבחרו "NCCH image options", ושם "Inject to H&S"
@@ -107,17 +107,17 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. פתחו את Health & Safety (שהוא כעת FBI)
 1. נווטו אל `SD` ושם אל `cias`
 1. לחצו על "\<current directory>"
-1. תבחרו את האופציה "Install all CIAs", ולאחר מכן לחצו על (A) לאישור
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. תלחצו על (Home) כדי לצאת מFBI
 
 ##### חלק VI - DSP Dump
 
 1. תפעילו את DSP1
-1. Once it has completed, press (B) to self-delete the app and return to the home menu
+1. אחרי שזה סיים, תלחצו (B) כדי למחוק את התוכנה ולחזור למסך הבית
 
 ##### חלק VII - שחזור Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה
 1. תבחרו ב"More..."
 1. תבחרו ב "Restore H&S"
@@ -135,17 +135,14 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. לחצו (A) כדי לפתוח גישת כתיבת lvl1 לSysNAND, ואז תלחצו על המקשים בסדר הנכון
 1. תלחצו (B) כדי לחזור לתפריט הראשי
 1. נווטו ל`[0:] SDCARD`
-1. Press (Y) on the `luma` folder to copy it
+1. תלחצו (Y) על תיקיית `luma` כדי להעתיק אותה
 1. תלחצו (B) כדי לחזור לתפריט הראשי
-1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
+1. לכו ל`[1:] SYSNAND CTRNAND` ומשם ל`rw`
-1. Press (X) on the existing `luma` folder to delete it
+1. תלחצו (Y) כדי להדביק עותק של תיקיית `luma` מכרטיס הSD שלכם
-  + If you do not have this folder, just proceed with the instructions
-1. תלחצו (A) כדי לאשר
-1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### חלק IX - גיבוי NAND
 
-1. Press (B) until you get to the main menu
+1. תלחצו (B) פעמיים כדי לחזור לתפריט הראשי
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה
 1. תבחרו ב"More..."
 1. תבחרו ב "Backup NAND"

_pages/he_IL/get-started-(new-3ds).txt

@@ -1,5 +1,5 @@
 ---
-title: "Get Started (New 3DS)"
+title: "צעדים ראשונים (New 3DS)"
 ---
 
 תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה.
@@ -36,7 +36,7 @@ title: "Get Started (New 3DS)"
       <tr>
         <td style="text-align: center; font-weight: bold;">2.1.0</td>
         <td style="text-align: center; font-weight: bold;">2.1.0</td>
-        <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(2xrsa)">Installing boot9strap (2xrsa)</a></td>
+        <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(2xrsa)">התקנת boot9strap (2xrsa)</a></td>
       </tr>
       <tr>
         <td style="text-align: center; font-weight: bold;">8.1.0</td>

_pages/he_IL/get-started-(old-3ds).txt

@@ -1,5 +1,5 @@
 ---
-title: "Get Started (Old 3DS)"
+title: "צעדים ראשונים (Old 3DS)"
 ---
 
 תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה.
@@ -58,7 +58,7 @@ title: "Get Started (Old 3DS)"
       <td style="text-align: center; font-weight: bold;">2.1.0</td>
       <td style="text-align: center; font-weight: bold;">2.1.0</td>
       <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(hardmod)">התקנת boot9strap (הלחמה)</a></td>
-      <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(2xrsa)">Installing boot9strap (2xrsa)</a> or <a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a></td>
+      <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(2xrsa)">התקנת boot9strap (2xrsa)</a> or <a href="installing-boot9strap-(hardmod)">התקנת boot9strap (הלחמה)</a></td>
     </tr>
     <tr>
       <td style="text-align: center; font-weight: bold;">2.2.0</td>

_pages/he_IL/get-started.txt

@@ -1,5 +1,5 @@
 ---
-title: "Get Started"
+title: "צעדים ראשונים"
 ---
 
 עמוד זה הוא בשביל הוראות על איך להתקין את boot9strap אל 3DS או 2DS *לא פרוץ*. אם יש לכם כבר את arm9loaderhax מותקן ואתם רוצים לעדכן לboot9strap, תעקבו אחרי [עדכון אל boot9strap](updating-to-boot9strap).

_pages/he_IL/godmode9-usage.txt

@@ -1,5 +1,5 @@
 ---
-title: "GodMode9 Usage"
+title: "שימוש בGodMode9"
 ---
 
 GodMode9 הוא מנהל קבצים עם גישה מלאה לקונסולת ה-3DS, שנותן לכם גישה לכרטיס SD, למחיצות הFAT בתוך הSysNAND והEmuNAND שלכם ובעצם לכל דבר אחר. ביחד עם פונקציות אחרות, אתם יכולים להתיק, למחוק, לשנות שם לקבצים וליצור תיקיות.
@@ -162,7 +162,7 @@ GodMode9 הוא מנהל קבצים עם גישה מלאה לקונסולת ה-3
 #### הוראות
 
 1. תוודאו שיש לכם תיקייה עם שמירה ב`/files9/` לכל משחק GBA VC שאתם רוצים לשחזר לו את השמירה
-1. Do the following process for each GBA VC game that you want to restore the save for:
+1. תעשו את התהליך הבא בשביל כל משחק GBA VC שאתם רוצים לשחזר לו את השמירה:
   + תפעילו את המשחק
   + תצאו מהמשחק
   + תפעילו את הקונסולה בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את תפריט הטעינה של Luma3DS

_pages/he_IL/home.txt

@@ -8,7 +8,7 @@ header:
   cta_label: "צעדים ראשונים" #
   cta_url: "/he_IL/get-started" #
   caption:
-excerpt: "A complete guide to 3DS custom firmware, <br /> from stock to boot9strap.<br />"
+excerpt: "מדריך שלם לפריצת 3DS, <br /> מהחנות עד ל boot9strap.<br />"
 ---
 
 {% capture notice-home %}

_pages/he_IL/homebrew-launcher-(alternatives).txt

@@ -1,5 +1,5 @@
 ---
-title: "Homebrew Launcher (Alternatives)"
+title: "Homebrew Launcher (אלטרנטיבות)"
 ---
 
 להומברו לאנצ'ר יש הרבה כניסות, והרבה דרכי הפעלה.

_pages/he_IL/installing-boot9strap-(browser).txt

@@ -1,5 +1,5 @@
 ---
-title: "Installing boot9strap (Browser)"
+title: "התקנת boot9strap (דפדפן)"
 ---
 
 אם המכשיר שלכם כבר פרוץ עם EmuNAND, המדריך הזה עוסק רק בSysNAND. תבצעו את ההוראות על SysNAND. Emunand וRednand כמעט מונחים נרדפים.
@@ -23,7 +23,7 @@ title: "Installing boot9strap (Browser)"
 1. תעתיקו את התוכן של התיקייה `starter` מתוך `starter.zip` לתיקייה הראשית של כרטיס הSD
 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
-1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. מתוך הזיפ של SafeB9SInstaller, תעתיקו את הקבצים SafeB9SInstaller.dat ו`Launcher.dat` ל-SD שלכם
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
 1. תפעילו את המכשיר
 
@@ -44,7 +44,7 @@ title: "Installing boot9strap (Browser)"
 1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap
 1. כשזה סיים, לחצו על (A) כדי לאתחל את הקונסולה
 1. הקונסולה שלכם תאתחל אל boot9strap, ואז תתכבה אוטומטית כי אין לה עדיין תוכנה להפעיל
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+  + הקונסולה שלכם לא תעבוד עד שתמשיכו עם ההוראות של העמוד הבא; אל תפחדו, זה נורמלי
 
 ___
 

_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt

@@ -90,7 +90,7 @@ lang: he
 1. לחצו על (Start) על מנת להפעיל מחדש
 1. תפעילו את משחק הDSiWare שלכם על **קונסולת המקור**
 1. תלחצו על המסך או תלחצו על כל כפתור כדי להפעיל את המשחק וכדי לבדוק אם השמירה עובדת
-  + **EUR (Guitar Rock Tour)** users must scroll down and go to High-Scores -> Drums -> Easy
+  + משתמשי **EUR (Guitar Rock Tour)** חייבים לגלול למטה וללכת אל High-Scores -> Drums -> Easy
   + אם אתם מקבלים שגיאה לגבי `boot.nds`, **הפריצה עבדה**
   + אם למשחק יש שגיאה לגבי שמירה פגומה או לא ניתנת לגישה, תבדקו שהעתקתם את **התוכן של** תיקיית `savedata` ולא את התיקייה `savedata` בעצמה
   + אם המשחק עובד כרגיל ולא נותן לכם את השגיאה לגבי boot.nds, תעצרו ותנסו להבין מה לא הלך טוב
@@ -138,7 +138,7 @@ lang: he
 1. תעתיקו את ה`.firm` של 11.4.0 שמתאים ל**קונסולת היעד** לתיקיית `boot9strap` על שורש כרטיס הSD של **קונסולת היעד**
 1. תעתיקו את`boot9strap.firm` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
 1. תפעילו את b9sTool על ידי הפעלת משחק הDSiWare שלכם על **קונסולת היעד**
-  + **EUR (Guitar Rock Tour)** users must scroll down and go to High-Scores -> Drums -> Easy
+  + משתמשי **EUR (Guitar Rock Tour)** חייבים לגלול למטה וללכת אל High-Scores -> Drums -> Easy
   + אם המשחק לא מפעיל את b9sTool, [תעקבו אחרי המדריך הזה לפתרון בעיות](troubleshooting#ts_dsiware)
 1. תבחרו ב "Dump F0F1" כדי לגבות את הFIRM של **קונסולת היעד**
 1. שימו לב למקום גיבוי הFIRM
@@ -156,7 +156,7 @@ lang: he
 1. תצאו מb9sTool, ואז תכבו את הקונסולה
   + אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
 1. הקונסולה שלכם תאתחל אל boot9strap, ואז תתכבה אוטומטית כי אין לה עדיין תוכנה להפעיל
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+  + הקונסולה שלכם לא תעבוד עד שתמשיכו עם ההוראות של העמוד הבא; אל תפחדו, זה נורמלי
 
 ___
 

_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt

@@ -24,18 +24,18 @@ lang: he
 
     + USA DSiWare
       + משתמש בSudokuhax
-      + `.app` size of >= 3,457,024 bytes
+      + גודל `.app` של >= 3,457,024 בייטים
-      + `public.sav` size of >= 67,584 bytes
+      + גודל `public.sav` של >= 67,584 בייטים
 
     + EUR DSiWare
-      + Uses grtpwn
+      + משתמש בgrtpwn
-      + `.app` size of >= 10,792,960 bytes
+      + גודל`.app` של >= 10,792,960 בייטים
-      + `public.sav` size of >= 531,058 bytes
+      + גודל `public.sav` של >= 531,058 בייטים
 
     + JPN DSiWare
       + משתמש ב4swordshax
-      + `.app` size of >= 14,131,200 bytes
+      + גודל`.app` של >= 14,131,200 בייטים
-      + `public.sav` size of == 16,384 bytes
+      + גודל `public.sav` של == 16,384 בייטים
       + אם "public.sav" הוא לא בדיוק 16KB, אז 4swords ימחק אותו
 
 {% endcapture %}

_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt

@@ -170,7 +170,7 @@ lang: he
 1. תצאו מb9sTool, ואז תכבו את הקונסולה
   + אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
 1. הקונסולה שלכם תאתחל אל boot9strap, ואז תתכבה אוטומטית כי אין לה עדיין תוכנה להפעיל
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+  + הקונסולה שלכם לא תעבוד עד שתמשיכו עם ההוראות של העמוד הבא; אל תפחדו, זה נורמלי
 
 ___
 

_pages/he_IL/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "התקנת boot9strap (הלחמה)" #
-lang: he
+lang: he
+
 ---
 
 מדריך מצוין לעשות את ההלחמה ניתן למצוא [כאן](https://gbatemp.net/threads/414498/). אם אתם על New 3DS, תקראו את [זה](https://github.com/Plailect/Guide/issues/681) לפני שאתם מלחימים.
@@ -60,11 +61,12 @@ lang: he
 1. תעתיקו את ה`.firm` שהורדתם אל תיקיית hardmod-b9s-installer במחשב שלכם
 1. שנו שם ל `.firm` שהורדתם בתיקיית hardmod-b9s-installer על המחשב שלכם אל `current.firm`
 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית hardmod-b9s-installer על המחשב שלכם
+1. תעתיקו את גיבוי הNAND שלכם (שהשגתם עם ההלחמה) אל תיקיית hardmod-b9s-installer על המחשב שלכם ותקראו לו `NAND.bin`
 1. תפעילו את hardmod-b9s-installer
-  + משתמשי Windows: תריצו את ה `.exe`
+  + משתמשי Windows: תריצו את `install-b9s.exe`
-  + משתמשי Mac ו Linux: תריצו את ה `.py`
+  + משתמשי Mac ו Linux: תריצו את `install-b9s.py`
 1. תשימו את `nand_patched.bin`שיצא על הקונסולה עם ההלחמה שעשיתם
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+  + הקונסולה שלכם לא תעבוד עד שתמשיכו עם ההוראות של העמוד הבא; אל תפחדו, זה נורמלי
 
 ___
 

_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt

@@ -1,5 +1,5 @@
 ---
-title: "Installing boot9strap (Homebrew Launcher)"
+title: "התקנת boot9strap (Homebrew Launcher)"
 ---
 
 אם המכשיר שלכם כבר פרוץ עם EmuNAND, המדריך הזה עוסק רק בSysNAND. תבצעו את ההוראות על SysNAND. Emunand וRednand כמעט מונחים נרדפים.
@@ -40,8 +40,8 @@ title: "Installing boot9strap (Homebrew Launcher)"
   + אם זה נקפא, כבו בכוח את המכשיר על-ידי החזקת כפתור ההדלקה ולאחר מכן נסו שוב
 1. תפעילו את safehax מרשימת הhomebrew שלכם
   + ייתכן שתצטרכו לגלול למטה כדי לראות את האופציה הזאת
-  + If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
+  אם אתם מקבלים את הודעת השגיאה "PM INIT FAILED", שימו לב שאתם מריצים את udsploit עם תקשורת אלחוטית מופעלת
-  + If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+  + אם אתם *עדיין* מקבלים את השגיאה "PM INIT FAILED", תנסו להשתמש ב[גרסת r19 של safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
   + אם זה נקפא, כבו בכוח את המכשיר על-ידי החזקת כפתור ההדלקה ולאחר מכן נסו שוב
 1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller
 
@@ -51,7 +51,7 @@ title: "Installing boot9strap (Homebrew Launcher)"
 1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap
 1. כשזה סיים, לחצו על (A) כדי לאתחל את הקונסולה
 1. הקונסולה שלכם תאתחל אל boot9strap, ואז תתכבה אוטומטית כי אין לה עדיין תוכנה להפעיל
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+  + הקונסולה שלכם לא תעבוד עד שתמשיכו עם ההוראות של העמוד הבא; אל תפחדו, זה נורמלי
 
 ___
 

_pages/he_IL/installing-boot9strap-(mset).txt

@@ -1,5 +1,5 @@
 ---
-title: "Installing boot9strap (MSET)"
+title: "התקנת boot9strap (MSET)"
 ---
 
 אם המכשיר שלכם כבר פרוץ עם EmuNAND, המדריך הזה עוסק רק בSysNAND. תבצעו את ההוראות על SysNAND. Emunand וRednand כמעט מונחים נרדפים.
@@ -45,7 +45,7 @@ title: "Installing boot9strap (MSET)"
 1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap
 1. כשזה סיים, לחצו על (A) כדי לאתחל את הקונסולה
 1. הקונסולה שלכם תאתחל אל boot9strap, ואז תתכבה אוטומטית כי אין לה עדיין תוכנה להפעיל
-  + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
+  + הקונסולה שלכם לא תעבוד עד שתמשיכו עם ההוראות של העמוד הבא; אל תפחדו, זה נורמלי
 
 ___
 

_pages/he_IL/move-emunand.txt

@@ -1,5 +1,5 @@
 ---
-title: "Move EmuNAND"
+title: "הזזת EmuNAND"
 ---
 
 זוהי הרחבה עבור העברת התכנים מהEmuNAND הישן שלכם ל CFW SysNAND חדש, ולאחר מכן הסרת הEmuNAND הישן. Emunand וRednand כמעט מונחים נרדפים.

_pages/he_IL/ntr-and-cubic-ninja.txt

@@ -1,5 +1,5 @@
 ---
-title: "NTR and Cubic Ninja"
+title: "NTR ו- Cubic Ninja"
 ---
 
 **כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**

_pages/he_IL/region-changing.txt

@@ -1,5 +1,5 @@
 ---
-title: "Region Changing"
+title: "שינוי אזור"
 ---
 
 זוהי הרחבה עבור שינוי אזור הSysNAND CFW שלכם. זה נעשה על ידי התקנת ה9.2.0 CTRTransfer image לאיזור שאתם רוצים לשנות אליו.

_pages/he_IL/site-navigation.txt

@@ -1,5 +1,5 @@
 ---
-title: "Site Navigation" #
+title: "ניווט האתר" #
 layout: single-no-ads
 sitemap: false
 ---

_pages/he_IL/troubleshooting.txt

@@ -1,5 +1,5 @@
 ---
-title: "Troubleshooting"
+title: "פתרון בעיות"
 ---
 
 אם אתם לא מצליחים להפעיל את המכשיר שלכם, תחפשו את החלק הרלוונטי לכם ותעקבו אחרי ההוראות. אחרי שפתרון עבד לכם, תמשיכו עם המדריך הראשי
@@ -174,7 +174,7 @@ title: "Troubleshooting"
 1. לחצו (Y) כדי להעתיק את הקבצים
 1. תלחצו (B) פעמיים כדי לחזור לתפריט הראשי
 1. נווטו אל `[S:] SYSNAND VIRTUAL`
-1. Press (Y) to paste a copy of `firm0firm1.bak` and `sector0x96.bak`
+1. תלחצו (Y) כדי להדביק עותק של `firm0firm1.bak` ו`sector0x96.bak`
 1. תלחצו (A) כדי לאשר
 1. תלחצו (A) כדי להזריק את הקבצים
 1. תלחצו (A) כדי לפתוח גישת כתיבה לSysNAND

_pages/he_IL/updating-to-boot9strap.txt

@@ -1,5 +1,5 @@
 ---
-title: "Updating to boot9strap"
+title: "עדכון אל boot9strap"
 ---
 
 דף זה מיועד למשתמשי arm9loaderhax קיימים לעדכן את מכשיריהם לboot9strap.
@@ -8,7 +8,7 @@ title: "Updating to boot9strap"
 כל המהדורות הבאות של Luma3DS יוצרו בתוך פורמט ה'firm' בלבד, שיתמוך רק בboot9strap ובsighax. זה אומר שכדי להמשיך לקבל את העדכונים האחרונים של Luma3DS עליכם להשתמש בדף הזה כדי לעדכן את ההתקנה שלכם.
 {: .notice--info}
 
-If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you *either* temporarily disable your PIN (you can re-enable the PIN after the update), *or* download the `aeskeydb.bin` file below.
+אם יש לכם קוד בLuma3DS, אז SafeB9SInstaller יביא לכם שגיאת "OTP Crypto Fail" אלא אם כן אתם או מבטלים זמנית את הקוד (אתם יכולים להפעיל אותו מחדש אחרי העדכון), *או* מורידים את קובץ `aeskeydb.bin` שלמטה.
 {: .notice--warning}
 
 **כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
@@ -19,15 +19,15 @@ If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Cry
 שימו לב שהקובץ הדרוש הנקרא `secret_sector.bin` הוא אותו אחד שנמצא בכל הגרסאות של הקובץ `data_input.zip`. אם יש לכם את הקובץ הזה איפושהו, אתם יכולים להשתמש בו במקום להוריד את האחד למטה.
 {: .notice--info}
 
-Note that, on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console. If you do not have a New 3DS, you do not need `secret_sector.bin`.
+שימו לב ש'secret_sector.bin' נדרש כדי למחוק את פריצת arm9loaderhax על New 3DS, ולכן הוא לא נחוץ עבור ההתקנה של boot9strap על קונסולה לא פרוצה. אם אין לכם New 3DS, אתם לא צריכים להוריד את `secret_sector.bin`.
 {: .notice--info}
 
-Note that the the following required file named `aeskeydb.bin` is *not* the same one that was previously used in this guide. It is required to remove the software "3DSafe" as it allows SafeB9SInstaller to retrieve your console unique OTP. This guide has never instructed you to install "3DSafe", so if you do not remember installing it, you most likely do not have it and do not need `aeskeydb.bin`.
+שימו לב שהקובץ הבא שנקרא `aeskeydb.bin` הוא *לא* אותו אחד ששומש מקודם במדריך הזה. אתם חייבים למחוק את התוכנה "3DSafe" כי היא לא מאפשרת לSafeB9SInstaller להשיג את הOTP שמיוחד לכל קונסולה. המדריך הזה מעולם לא אמר לכם להתקין את "3DSafe", אז אם אתם לא זוכרים שהתקנתם אותו, ככל הנראה אין לכם אותו ואתם לא צריכים את `aeskeydb.bin`.
 {: .notice--info}
 
-* <i class="fa fa-magnet" aria-hidden="true" title="זה לינק מגנטי. Use a torrent client to download the file."></i> - **"3DSafe" Users Only:** [`aeskeydb.bin`](magnet:?xt=urn:btih:621f8af00638cb2b00d5bd0c6816543fa00b5fb1&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce)
+* <i class="fa fa-magnet" aria-hidden="true" title="זה לינק מגנטי. תשתמשו בתוכנת טורנט כדי להוריד את הקובץ."></i> - **משתמשי "3DSafe" בלבד:** [`aeskeydb.bin`](magnet:?xt=urn:btih:621f8af00638cb2b00d5bd0c6816543fa00b5fb1&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce)
-  + **Note that this file will also fix the error "OTP Crypto Fail" for anyone who encounters it (with or without "3DSafe" installed), such as users with a Luma3DS PIN enabled**
+  + **שימו לב שהקובץ הזה יתקן גם את השגיאה "OTP Crypto Fail" לכל אחד שנתקל בה (עם או בלי 3DSafe מותקן), כמו משתמשים עם קוד של Luma3DS פועל**
-* <i class="fa fa-magnet" aria-hidden="true" title="זה לינק מגנטי. Use a torrent client to download the file."></i> - **New 3DS Only:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
+* <i class="fa fa-magnet" aria-hidden="true" title="זה לינק מגנטי. תשתמשו בתוכנת טורנט כדי להוריד את הקובץ."></i> - **New 3DS בלבד:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
 * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
 * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest)
@@ -42,16 +42,16 @@ Note that the the following required file named `aeskeydb.bin` is *not* the same
 1. תכניסו את ה-SD שלכם למחשב
 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם
 1. צרו תיקייה בשם `cias` בתיקיית האם של כרטיס ה- SD שלכם אם לא קיימת תיקייה כזו
-1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
+1. תעתיקו את הקובץ `lumaupdater.cia` לתוך התיקייה `/cias/` שב-SD שלכם
 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
 1. העתיקו את `GodMode9.firm` מהזיפ של GodMode9 אל תיקיית /luma/payloads/ ב- SD שלכם
 1. תמחקו כל קובץ `.bin` בתיקיית `/luma/payloads/`על כרטיס הSD שלכם כי הם לא יהיו תואמים בגרסאות של Luma3DS שתואמות עם boot9strap
 1. העתיקו את `SafeB9SInstaller.bin` מהזיפ של SafeB9SInstaller אל תיקיית /luma/payloads/ ב- SD שלכם
 1. שנו שם ל `SafeB9SInstaller.bin` בתיקיית `/luma/payloads/` על הכרטיס הSD שלכם ל `start_SafeB9SInstaller.bin`
 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
-1. **New 3DS Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
+1. **New 3DS בלבד:** העתיקו את הקובץ `secret_sector.bin` לתיקייה `/boot9strap/` שב- SD שלכם
-1. **"3DSafe" Users Only:** Copy `aeskeydb.bin` to the `/boot9strap/` folder on your SD card
+1. **משתמשי "3DSafe" בלבד:** העתיקו את הקובץ `aeskeydb.bin` לתיקייה `/boot9strap/` שב- SD שלכם
-  + **Note that this file will also fix the error "OTP Crypto Fail" for anyone who encounters it (with or without "3DSafe" installed), such as users with a Luma3DS PIN enabled**
+  + **שימו לב שהקובץ הזה יתקן גם את השגיאה "OTP Crypto Fail" לכל אחד שנתקל בה (עם או בלי 3DSafe מותקן), כמו משתמשים עם קוד של Luma3DS פועל**
 
     ![]({{ base_path }}/images/screenshots/updating-to-b9s-file-layout.png)
     {: .notice--info}
@@ -64,7 +64,7 @@ Note that the the following required file named `aeskeydb.bin` is *not* the same
   + כמה גרסאות של Luma3DS פשוט יפעילו כל תוכנה שמתחילה עם`start_`
   + אם הגרסה שלכם עושה את זה, פשוט תמשיכו עם ההוראות
 1. תפעילו את SafeB9SInstaller על ידי לחיצת (A) עליו
-  + If this gives you an error, try either using a new SD card, or formatting your current SD card (backup existing files first)
+  + אם זה נותן לכם שגיאה, תנסו או כרטיס SD אחר, או תפרמטו את הSD שיש לכם (תגבו קבצים קיימים קודם)
 1. תחכו שכל בדיקות הבטיחות יסתיימו
 1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap
 1. כשזה סיים, לחצו על (A) כדי לאתחל את הקונסולה.
@@ -81,7 +81,7 @@ Note that the the following required file named `aeskeydb.bin` is *not* the same
 
 ##### חלק IV - Luma3DS על ה- CTRNAND
 
-If, before updating to boot9strap, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section.
+במקרה שבו לפני העדכון לboot9strap היה לכם EmuNAND מותקן וברצונכם להעביר את התוכן שלו ל-SysNAND CFW שלכם, עכשיו זה הזמן לבצע [העברת EmuNAND](move-emunand) לפני ביצוע חלק זה.
 {: .notice--info}
 
 1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את תפריט הטעינה של Luma3DS
@@ -101,20 +101,22 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. תלחצו (A) כדי לאשר
 1. תלחצו (B) כדי לחזור לתפריט הראשי
 1. נווטו ל`[0:] SDCARD`
-1. Press (Y) on the `luma` folder to copy it
+1. תלחצו (Y) על תיקיית `luma` כדי להעתיק אותה
+  + אם יש לכם קבצים או תיקייות *חוץ מ* אלה בגלל שעקבתם אחרי גרסה ישנה של המדריך (`config.bin` ו `payloads`) בתיקיית `luma`שלכם (כמו קבצי LayeredFS), אתם צריכים במקום להעתיק רק את `config.bin` ו`payloads` על ידי סימונם עם (L), ואז לחיצת (Y) כדי להעתיק
 1. תלחצו (B) כדי לחזור לתפריט הראשי
-1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
+1. לכו ל`[1:] SYSNAND CTRNAND` ומשם ל`rw`
-1. Press (X) on the existing `luma` folder to delete it
+1. תלחצו (X) על תיקיית `luma` הקיימת כדי למחוק אותה
-  + If you do not have this folder, just proceed with the instructions
+  + אם אין לכם אותה, פשוט תמשיכו עם ההוראות
 1. תלחצו (A) כדי לאשר
-1. Press (Y) to paste a copy of the `luma` folder from your SD card
+1. תלחצו (Y) כדי להדביק עותק של תיקיית `luma` מכרטיס הSD שלכם
+  + אם רק העתקתם את `config.bin` ו`payloads` מוקדם יותר, אתם תצטרכו ליצור את תיקיית `luma` באופן ידני (תחזיקו את (R) ותלחצו (Y) באותו הזמן, תתנו את השם `luma`, ואז תלחצו (A) כדי לאשר), ואז תנווטו ל `luma`, ואז תלחצו (Y) כדי להדביק את `config.bin` ו`payloads`
 1. לחצו על (Start) על מנת להפעיל מחדש
 
 ##### חלק V - התקנת Luma3DS Updater
 
 1. תפעילו את FBI
 1. נווטו אל `SD` ושם אל `cias`
-1. Select `lumaupdater.cia`
+1. תבחרו ב`lumaupdater.cia`
 1. לחצו על האפשרות "Install CIA" ולאחר מכן על (A) על מנת לאשר
 1. תלחצו על (Home) כדי לצאת מFBI
 

_pages/he_IL/why-ads.txt

@@ -1,5 +1,5 @@
 ---
-title: "Why Ads?" #
+title: "למה יש פרסומות?" #
 layout: single-no-ads
 ---
 

_pages/hu_HU/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/hu_HU/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: en
+lang: en
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/hu_HU/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/id_ID/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/id_ID/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: en
+lang: en
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/id_ID/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Press (A) to confirm
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/it_IT/finalizing-setup.txt

@@ -107,13 +107,13 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
 1. Avvia "Informazioni per la salute e la sicurezza" (che ora è FBI)
 1. Entra nella cartella `SD` -> `cias`
 1. Seleziona "\<current directory>"
-1. Seleziona l'opzione "Install all CIAs", quindi premi (A) per confermare la scelta
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Premi il pulsante HOME per uscire da FBI
 
 ##### Sezione VI - Dump di DSP
 
 1. Avvia DSP1
-1. Una volta completato il processo, premi (B) per cancellare l'app e ritornare al menu HOME
+1. Al termine delle operazioni, premi (B) per cancellare l'app e ritornare al menu HOME
 
 ##### Sezione VII - Ripristino di "Informazioni per la salute e la sicurezza"
 
@@ -138,14 +138,11 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
 1. Premi (Y) sulla cartella `luma` per copiarla
 1. Premi (B) per ritornare al menu principale
 1. Entra nella cartella `[1:] SYSNAND CTRNAND` -> `rw`
-1. Premi (X) sulla cartella `luma` per cancellarla
-  + Se non dovessi avere questa cartella, prosegui normalmente con le istruzioni
-1. Premi (A) per confermare
 1. Premi (Y) per incollare una copia della cartella `luma` dalla tua scheda SD
 
 ##### Sezione IX - Backup della NAND
 
-1. Premi (B) finché non ritorni al menu principale
+1. Premi (B) due volte per ritornare al menu principale
 1. Premi il pulsante HOME per far apparire il menu delle azioni
 1. Seleziona "More..."
 1. Seleziona "Backup NAND"

_pages/it_IT/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installazione di boot9strap (Hardmod)" #
-lang: it
+lang: it
+
 ---
 
 [Qui](https://gbatemp.net/threads/414498/) puoi trovare un'ottima guida per eseguire un'hardmod. Se hai un New 3DS, leggi [qui](https://github.com/Plailect/Guide/issues/681) prima di effettuare l'hardmod.
@@ -60,9 +61,10 @@ Questo processo funziona su New 3DS, Old 3DS e 2DS su *tutte* le versioni per le
 1. Copia il file `.firm` scaricato nella cartella hardmod-b9s-installer sul tuo computer
 1. Rinomina il file `.firm` appena copiato in `current.firm`
 1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella hardmod-b9s-installer sul tuo computer
+1. Copia il tuo backup della NAND (estratto con l'hardmod) nella cartella hardmod-b9s-installer sul tuo computer e rinominalo in `NAND.bin`
 1. Avvia hardmod-b9s-installer
-  + Se sei un utente Windows: Avvia il file `.exe`
+  + Se sei un utente Windows: Avvia il file `install-b9s.exe`
-  + Se sei un utente Mac o Linux: Avvia il file `.py`
+  + Se sei un utente Mac o Linux: Avvia il file `install-b9s.py`
 1. Flasha il file `nand_patched.bin` appena creato nella tua console tramite hardmod
   + La tua console ora non si avvierà finché non eseguirai le istruzioni presenti nella pagina successiva; non ti preoccupare, è normale
 

_pages/it_IT/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ Se prima di aggiornare a boot9strap avevi già un'installazione EmuNAND presente
 1. Premi (B) per ritornare al menu principale
 1. Entra in `[0:] SDCARD`
 1. Premi (Y) sulla cartella `luma` per copiarla
+  + Se hai *altri* file o cartelle oltre a quelli utilizzati in precedenti versioni di questa guida (come il file `config.bin` e la cartella `payloads`) nella tua cartella `luma` (è il caso dei file LayeredFS), devi invece copiare solo `config.bin` e `payloads` selezionandoli con (L), quindi copiandoli con (Y)
 1. Premi (B) per ritornare al menu principale
 1. Entra nella cartella `[1:] SYSNAND CTRNAND` -> `rw`
 1. Premi (X) sulla cartella `luma` per cancellarla
   + Se non dovessi avere questa cartella, prosegui normalmente con le istruzioni
 1. Premi (A) per confermare
 1. Premi (Y) per incollare una copia della cartella `luma` dalla tua scheda SD
+  + Se in precedenza hai copiato soltanto il file `config.bin` e la cartella `payloads`, dovrai invece creare la cartella `luma` manualmente (premi (Y) mentre tieni premuto il pulsante (R), inserisci il nome `luma`, quindi premi (A) per confermare la scelta), poi entrare in `luma`, infine premere (Y) per incollare `config.bin` e `payloads`
 1. Premi il pulsante (Start) per riavviare la console
 
 ##### Sezione V - Installazione di Luma3DS Updater

_pages/ja_JP/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. 「\<current directory>」を選択します
-1. 「Install all CIAs」オプションを選択して、(A) を押して確認します
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. (A) を押して確認します
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/ja_JP/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: ja
+lang: ja
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/ja_JP/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. (A) を押して確認します
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/ko_KR/finalizing-setup.txt

@@ -108,7 +108,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. 안전을 위한 주의사항(현재는 FBI)을 실행해 주세요.
 1. `SD` -> `cias`로 이동해 주세요.
 1. "\<current directory>" 폴더를 선택해 주세요.
-1. "Install all CIAs" 설정을 선택한 뒤 (A)를 눌러 주세요.
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. (Home)을 눌러 FBI를 종료해 주세요.
 
 ##### Section VI - DSP Dump
@@ -139,14 +139,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. (B)를 눌러 메인 메뉴로 돌아가 주세요.
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. (A)를 눌러 주세요.
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. (B)를 두 번 눌러 메인 메뉴로 돌아가 주세요.
 1. (Home)을 눌러 작업 메뉴를 띄워 주세요.
 1. "More..."를 선택해 주세요.
 1. "Backup NAND"를 선택해 주세요.

_pages/ko_KR/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: ko
+lang: ko
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -61,9 +62,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/ko_KR/updating-to-boot9strap.txt

@@ -103,12 +103,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. (B)를 눌러 메인 메뉴로 돌아가 주세요.
 1. `[0:] SDCARD`로 이동해 주세요.
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. (B)를 눌러 메인 메뉴로 돌아가 주세요.
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. (A)를 눌러 주세요.
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/ms_MY/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Pilih "\<current directory>"
-1. Pilih pilihan "Install all CIAs", kemudian tekan butang (A) untuk pengesahan
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Tekan (A) untuk pengesahan
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/ms_MY/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: ms
+lang: ms
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/ms_MY/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Tekan (A) untuk pengesahan
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/nl_NL/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Open Gezondheids- en veiligheidsinformatie (wat nu FBI is)
 1. Navigeer naar `SD` -> `cias`
 1. Selecteer "\<current directory>"
-1. Selecteer de optie "Install all CIAs" en druk op (A) om te bevestigen
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Druk op (Home) om FBI af te sluiten
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Druk op (B) om terug te gaan naar het hoofdmenu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Druk op (A) om te bevestigen
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Druk twee keer op (B) om terug te gaan naar het hoofdmenu
 1. Druk op de (Home) knop om het actiemenu te openen
 1. Selecteer "More..."
 1. Selecteer "Backup NAND"

_pages/nl_NL/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: nl
+lang: nl
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/nl_NL/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Druk op (B) om terug te gaan naar het hoofdmenu
 1. Navigeer naar `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Druk op (B) om terug te gaan naar het hoofdmenu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Druk op (A) om te bevestigen
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/no_NO/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Velg "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Trykk (A) for å bekrefte
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/no_NO/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: no
+lang: no
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/no_NO/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Trykk (A) for å bekrefte
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/pl_PL/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Wybierz "\<current directory>"
-1. Wybierz opcję "Install all CIAs", a następnie naciśnij (A) aby potwierdzić
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Naciśnij (A) aby potwierdzić
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/pl_PL/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: pl
+lang: pl
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/pl_PL/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Naciśnij (A) aby potwierdzić
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/pt_BR/finalizing-setup.txt

@@ -107,7 +107,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
 1. Inicie o aplicativo Informações sobre saúde e segurança (que agora é o FBI)
 1. Navegue para `SD` -> `cias`
 1. Selecione "\<current directory>"
-1. Selecione a opção "Install all CIAs" e, em seguida, aperte (A) para confirmar
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Aperte (Home) para sair do FBI
 
 ##### Seção VI - DSP Dump
@@ -138,14 +138,11 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
 1. Aperte (Y) na pasta `luma` para copia-la
 1. Aperte (B) para retornar para o menu principal
 1. Navegue para `[1:] SYSNAND CTRNAND` -> `rw`
-1. Aperte (X) na pasta `luma` existente para apagá-la
-  + Se você não tem essa pasta, apenas prossiga com as instruções
-1. Aperte (A) para confirmar
 1. Aperte (Y) para colar uma cópia da pasta `luma` do seu cartão SD
 
 ##### Seção IX - Backup da NAND
 
-1. Press (B) until you get to the main menu
+1. Aperte (B) duas vezes para retornar para o menu principal
 1. Aperte (Home) para abrir o menu de ações
 1. Selecione "More..."
 1. Selecione "Backup NAND"
@@ -173,7 +170,7 @@ Isso só atualizará os arquivos do Luma3DS no seu cartão SD. Se você iniciali
 Você agora irá inicializar o CFW Luma3DS na SysNAND por padrão.    
 Agora você pode segurar (Select) durante a inicialização para abrir o menu de configuração do Luma3DS.    
 Agora você pode segurar (Start) durante a inicialização para abrir o menu do chainloader do Luma3DS (note que este menu só será mostrado se existir mais de um payload detectado).
-Agora você pode segurar (Start) + (Select) + (X) durante a inicialização para criar backups do ARM11 bootrom (`boot11.bin`), do ARM9 bootrom (`boot9.bin`) e do OTP único do seu dispositivo (`OTP.bin`) na pasta `/boot9strap/` no seu cartão SD (note que isso não terá nenhum tipo de aviso ou mensagem).
+Agora você pode segurar (Start) + (Select) + (X) durante a inicialização para criar cópias do ARM11 bootrom (`boot11.bin`), do ARM9 bootrom (`boot9.bin`) e do OTP único do seu dispositivo (`OTP.bin`) na pasta `/boot9strap/` no seu cartão SD (note que isso não terá nenhum tipo de aviso ou mensagem).
 {% endcapture %}
 
 <div class="notice--info">{{ notice-6 | markdownify }}</div>

_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt

@@ -12,13 +12,13 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
 Antes de prosseguir, certifique-se de ter lido todos os avisos e advertências em [Instalando boot9strap (DSiWare)](installing-boot9strap-(dsiware))
 {: .notice--danger}
 
-#### What you need
+#### O que você precisa
 
-* Dois consoles 3DSs
+* Dois consoles 3DS
-  + **The source 3DS**: the 3DS running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
+  + **O 3DS de origem**: o 3DS executando algum tipo de custom firmware (como boot9strap ou arm9loaderhax) *na versão mais recente*
-  + **The target 3DS**: the 3DS on stock firmware *on 11.4.0*
+  + **3DS de destino**: o 3DS em firmware não modificado na versão *11.4.0*
 * Purchase (or already own) a compatible DSiWare game from the eShop on **the source 3DS**
-  + A pirated copy of the game will **not** work
+  + Uma cópia pirata do jogo **não** irá funcionar
   + For a list of compatible games, see the [Installing boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list)) page
 * The sudokuhax injection `.zip` corresponding to your region
   + [`DSiWare_usa_sudokuhax_injection.zip`](magnet:?xt=urn:btih:7ed7fee15c900ed02b5e2cb3c8e7a0363f4d9354&dn=DSiWare_usa_sudokuhax_injection.zip&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce)
@@ -53,8 +53,8 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 1. Aperte (A) para continuar
 1. Segure (R) e aperte (B) ao mesmo tempo para ejetar o cartão SD
 1. Put **the target 3DS**'s SD card into your computer
-1. **Backup every file on both 3DS's SD cards to two separate folders on your computer (keep track of which is which)!**
+1. **Faça backup de todos os arquivos nos cartões SD de ambos os 3DSs em duas pastas separadas no seu computador (lembre de qual é qual)!**
-1. Reinsert each SD card back into their corresponding 3DS
+1. Reinsira cada cartão SD de volta nos seus 3DSs correspondentes
 1. Press (Start) on **the source 3DS** to reboot
 
 ##### Section II - Injecting the game and save
@@ -138,9 +138,9 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + **EUR (Guitar Rock Tour)** usuários devem rolar para baixo e irem para High-Scores -> Drums -> Easy
+  + Os usuários de **EUR (Guitar Rock Tour)** devem rolar para baixo e ir em High-Scores -> Drums -> Easy
   + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
-1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
+1. Selecione "Dump F0F1" para realizar o backup do FIRM do **3DS de destino**
 1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button

_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt

@@ -17,7 +17,7 @@ Se você não usar o `.firm` correto correspondente ao 3DS de destino, você cau
 
 #### O que você precisa
 
-* Dois consoles 3DSs
+* Dois consoles 3DS
   + **O 3DS de origem**: o 3DS executando algum tipo de custom firmware (como boot9strap ou arm9loaderhax) *na versão mais recente*
   + **3DS de destino**: o 3DS em firmware não modificado na versão *11.4.0*
 * Já possuir um dos seguintes jogos de DSiWare exploitáveis (uma cópia pirateada do jogo **não** vai funcionar) no **3DS de origem**
@@ -61,9 +61,9 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 1. Aperte (A) para continuar
 1. Segure (R) e aperte (B) ao mesmo tempo para ejetar o cartão SD
 1. Coloque o cartão SD **do 3DS de destino** no seu computador
-1. **Backup every file on both 3DS's SD cards to two separate folders on your computer (keep track of which is which)!**
+1. **Faça backup de todos os arquivos nos cartões SD de ambos os 3DSs em duas pastas separadas no seu computador (lembre de qual é qual)!**
-1. Reinsert each SD card back into their corresponding 3DS
+1. Reinsira cada cartão SD de volta nos seus 3DSs correspondentes
-1. Press (Start) on **the source 3DS** to reboot
+1. Aperte (Start) no **3ds de origem** para reiniciar
 
 ##### Seção II - Instalando o save
 
@@ -90,7 +90,7 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 1. + Aperte (Y) para colar `public.sav`
 1. Selecione "Copy path(s)"
 1. Press (Start) to reboot **the source 3DS**
-1. Launch your DSiWare game on **the source 3DS**
+1. Abra seu jogo DSiWare no **3DS de origem**
 1. Teste se o salve é funcional
   + **Fieldrunners**: Toque no botão 'Scores' no menu principal
   + **Legends of Exidia**: Depois de apertar (A) ou (Start) nas duas telas iniciais, selecione o primeiro slot de save e aperte em continuar
@@ -102,8 +102,8 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 
 ##### Section III - System Transfer
 
-1. **Backup every file on both 3DS's SD cards to two separate folders on your computer (keep track of which is which)!**
+1. **Faça backup de todos os arquivos nos cartões SD de ambos os 3DSs em duas pastas separadas no seu computador (lembre de qual é qual)!**
-1. Reinsert each SD card back into their corresponding 3DS
+1. Reinsira cada cartão SD de volta nos seus 3DSs correspondentes
 1. If **the target 3DS** has a Nintendo Network ID on it, you must format the device using System Settings:
   + Go to the last page of "Other Settings" and select "Format System Memory", then follow all instructions
 1. Read the following:
@@ -149,7 +149,7 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
   + **Guitar Rock Tour**: Desça e vá para High-Scores -> Drums -> Easy
   + **The Legend of Zelda: Four Swords**: Apenas abra o jogo
   Caso seu jogo não tenha o arquivo de save hackeado instalado, [siga este guia de solução de problemas](troubleshooting#ts_dsiware)
-1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
+1. Selecione "Dump F0F1" para realizar o backup do FIRM do **3DS de destino**
 1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button

_pages/pt_BR/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Instalando boot9strap (Hardmod)" #
-lang: pt_PT
+lang: pt_PT
+
 ---
 
 Um excelente guia para realizar um hardmod pode ser encontrado [aqui](https://gbatemp.net/threads/414498/). Caso esteja utilizando um New 3DS, leia [isto](https://github.com/Plailect/Guide/issues/681) antes de iniciar seu hardmod.
@@ -60,9 +61,10 @@ Isto funcionará no New 3DS, Old 3DS e 2DS em *todas* as versões em que você t
 1. Copie o `.firm` baixado para a pasta hardmod-b9s-installer no seu computador
 1. Renomeie o seu `.firm` baixado na pasta hardmod-b9s-installer no seu computador para `current.firm`
 1. Copie o `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta hardmod-b9s-installer no seu computador
+1. Copie sua cópia da NAND (do seu hardmod) para a pasta hardmod-b9s-installer no seu computador e renomeie-a para `NAND.bin`
 1. Execute hardmod-b9s-installer
-  + Usuários Windows: Execute o `.exe`
+  + Usuários Windows: Execute `install-b9s.exe`
-  + Usuários de Linux e Mac: Execute o `.py`
+  + Usuários de Linux e Mac: Execute `install-b9s.py`
 1. Sobrescreva esta `NAND-patched.bin` para o seu dispositivo com seu hardmod
   + Seu dispositivo não irá inciar até que você continue com as instruções da próxima página; não entre em pânico, isto é normal
 

_pages/pt_BR/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ Se, antes de atualizar para o boot9strap, você já possuia uma instalação Emu
 1. Aperte (B) para retornar para o menu principal
 1. Navegue para `[0:] SDCARD`
 1. Aperte (Y) na pasta `luma` para copia-la
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Aperte (B) para retornar para o menu principal
 1. Navegue para `[1:] SYSNAND CTRNAND` -> `rw`
 1. Aperte (X) na pasta `luma` existente para apagá-la
   + Se você não tem essa pasta, apenas prossiga com as instruções
 1. Aperte (A) para confirmar
 1. Aperte (Y) para colar uma cópia da pasta `luma` do seu cartão SD
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Aperte (Start) para reiniciar
 
 ##### Seção V - Instalando Luma3DS Updater

_pages/pt_PT/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Pressiona (A) para confirmar
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/pt_PT/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: pt_PT
+lang: pt_PT
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/pt_PT/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Pressiona (A) para confirmar
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/ro_RO/finalizing-setup.txt

@@ -107,7 +107,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Launch Health and Safety (which is now FBI)
 1. Navigate to `SD` -> `cias`
 1. Select "\<current directory>"
-1. Select the "Install all CIAs" option, then press (A) to confirm
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Press (Home) to exit FBI
 
 ##### Section VI - DSP Dump
@@ -138,14 +138,11 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Press (Y) on the `luma` folder to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
-1. Press (X) on the existing `luma` folder to delete it
-  + If you do not have this folder, just proceed with the instructions
-1. Apăsați (A) pentru a confirma
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
 
 ##### Section IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Press (B) twice to return to the main menu
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Backup NAND"

_pages/ro_RO/installing-boot9strap-(hardmod).txt

@@ -1,6 +1,7 @@
 ---
 title: "Installing boot9strap (Hardmod)" #
-lang: ro
+lang: ro
+
 ---
 
 An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). If you are on a New 3DS, read [this](https://github.com/Plailect/Guide/issues/681) before hardmodding.
@@ -60,9 +61,10 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer
 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm`
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer
+1. Copy your NAND dump (from your hardmod) to the hardmod-b9s-installer folder on your computer and name it `NAND.bin`
 1. Run hardmod-b9s-installer
-  + Windows Users: Run the `.exe`
+  + Windows Users: Run `install-b9s.exe`
-  + Mac and Linux Users: Run the `.py`
+  + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
   + Your device will not boot until you continue with the next page's instructions; do not panic, this is normal
 

_pages/ro_RO/updating-to-boot9strap.txt

@@ -102,12 +102,14 @@ If, before updating to boot9strap, you already had an EmuNAND setup and would li
 1. Press (B) to return to the main menu
 1. Navigate to `[0:] SDCARD`
 1. Press (Y) on the `luma` folder to copy it
+  + If you have files or folders *other than* the ones from following an earlier version of this guide (`config.bin` and `payloads`) in your `luma` directory (such as LayeredFS files), you should instead just copy `config.bin` and `payloads` by marking them with the (L) trigger, then pressing (Y) to copy
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
 1. Press (X) on the existing `luma` folder to delete it
   + If you do not have this folder, just proceed with the instructions
 1. Apăsați (A) pentru a confirma
 1. Press (Y) to paste a copy of the `luma` folder from your SD card
+  + If you only copied `config.bin` and `payloads` earlier, you will need to instead create the `luma` folder manually (hold the (R) trigger and pressing (Y) at the same time, give the name `luma`, then press (A) to confirm), then navigate to `luma`, then press (Y) to paste `config.bin` and `payloads`
 1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater

_pages/ru_RU/finalizing-setup.txt

@@ -1,5 +1,5 @@
 ---
-title: "Finalizing Setup"
+title: "Завершение установки"
 ---
 
 #### Описание шагов
@@ -93,7 +93,7 @@ title: "Finalizing Setup"
 
 ##### Часть IV - Интеграция FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Перезагрузитесь с зажатой кнопкой (Start), чтобы запустить GodMode9
 1. Перейдите в `[0:] SDCARD` -> `cias`
 1. Нажмите (A) чтобы выбрать файл `FBI.cia`, затем выберите "CIA image options...", затем "Mount image to drive"
 1. Нажмите (A) чтобы выбрать файл `.app`, затем выберите "NCCH image options", затем "Inject to H&S"
@@ -107,17 +107,17 @@ title: "Finalizing Setup"
 1. Запустите "Информация о здоровье и безопасности" (Health and Safety) (теперь это FBI)
 1. Перейдите в `SD` -> `cias`
 1. Выберите "\<current directory>"
-1. Выберите "Install all CIAs" и нажмите (A) для подтверждения
+1. Select the "Install and delete all CIAs" option, then press (A) to confirm
 1. Нажмите (Home) для выхода из FBI
 
 ##### Часть VI - DSP Dump
 
 1. Запустите DSP1
-1. Once it has completed, press (B) to self-delete the app and return to the home menu
+1. После завершения нажмите (B) чтобы удалить это приложение и вернуться в меню HOME
 
 ##### Часть VII - Восстановление приложения Информация о здоровье и безопасности (Health and Safety)
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Перезагрузитесь с зажатой кнопкой (Start), чтобы запустить GodMode9
 1. Нажмите кнопку (Home) для вызова меню
 1. Выберите "More..."
 1. Выберите "Restore H&S"
@@ -138,14 +138,11 @@ title: "Finalizing Setup"
 1. Нажмите (Y) на папке `luma`, чтобы скопировать её
 1. Нажмите (B) для возврата в главное меню
 1. Перейдите в `[1:] SYSNAND CTRNAND` -> `rw`
-1. Нажмите (X) на существующей папке `luma`, чтобы удалить её
-  + Если у вас нет этой папки, просто продолжайте следовать инструкциям
-1. Нажмите (A) для подтверждения
 1. Нажмите (Y), чтобы вставить копию папки `luma` из вашей SD-карты
 
 ##### Часть IX - NAND Backup
 
-1. Press (B) until you get to the main menu
+1. Дважды нажмите (B) для возврата в главное меню
 1. Нажмите кнопку (Home) для вызова меню
 1. Выберите "More..."
 1. Выберите "Backup NAND"