3DS / 3DS XL / 2DS consoles on firmware 11.17.0 do not currently have any free, software-only methods. Therefore, all of the methods here have some sort of prerequisite.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
Erstelle einen Ordner mit dem Namen Nintendo DSiWare innerhalb der <ID1>
- Wenn du bereits den Ordner hattest, und du hast schon DSiWare Backup Dateien darin hast (<8-Charakter-ID>.bin), kopiere sie zu deinem Computer und lösche sie von deiner SD-Karte
+
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
+
+
Öffne die output_(name) .zip Datei und gehe zu China_Taiwan -> output_setup
Kopiere alle sechs .bin Dateien in den Nintendo DSiWare Ordner
Erstelle einen Ordner mit dem Namen Nintendo DSiWare innerhalb der <ID1>
- Wenn du bereits den Ordner hattest, und du hast schon DSiWare Backup Dateien darin hast (<8-Charakter-ID>.bin), kopiere sie zu deinem Computer und lösche sie von deiner SD-Karte
+
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
+
+
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself.
+
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself. You can also have a chat with us in the #guide-meta channel at Nintendo Homebrew on Discord.
3DS firmware 11.17.0 was recently released. Hier ist, was du wissen solltest:
+
The latest 3DS firmware is 11.17.0. Hier ist, was du wissen solltest:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
I am on the latest system version. Is my console hackable without any external hardware/prerequisites?
-
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -598,7 +602,7 @@ window.cookieconsent.initialise({
I heard about this thing I have to pay for (Gateway, Sky3DS, ntrboot, R4, etc). Is that something I need?
-
At the moment, 3DS / 3DS XL / 2DS consoles on 11.17.0 need to use one of many alternate exploits to install custom firmware. If none of the other prerequisites are available, then ntrboot will be the cheapest available option (roughly $20 USD).
+
No. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
Lies alle Einleitungsseiten gründlich durch (einschließlich dieser), bevor du fortfährst.
-
3DS firmware 11.17.0 was recently released. Hier ist, was du wissen solltest:
+
The latest 3DS firmware is 11.17.0. Hier ist, was du wissen solltest:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
+
+
+
+
+
+
+
+
+Technische Details (optional)
+
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
Kompatibilitätshinweise
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
Was du brauchst
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
+
+
+
+
+
Anleitung
+
+
Abschnitt I - Vorbereitungen
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Power on your console
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Power off your console
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
Stecke deine SD-Karte in deinen Computer
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
+
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
+
In this section, you will install custom firmware onto your console.
+
+
+
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
+
+
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
+
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Drücke (Start) zum Speichern und neustarten
+
+
+
Section IV - Uninstalling MSET9
+
+
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
+
+
Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+
+
+
Power off your console
+
Stecke deine SD-Karte in deinen Computer
+
In the MSET9 window, type 4, then press Enter to remove MSET9
+
+
You should see “Removing… done”
+
+
+
Close the MSET9 window; you will not need it for any of the upcoming steps
+
+
+
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
+
+
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
+
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
If the camera did NOT appear, you cannot follow this method. If this is the case, stay on your current firmware and ask Nintendo Homebrew on Discord for help.
+
If the camera did NOT appear, you cannot follow this method. If this is the case, use Installing boot9strap (MSET9) instead.
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
Your console will have booted into the Homebrew Launcher
Launch nimdsphax from the list of homebrew
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
diff --git a/de_DE/installing-boot9strap-(soundhax).html b/de_DE/installing-boot9strap-(soundhax).html
index 9d6d288959..171802e3f9 100644
--- a/de_DE/installing-boot9strap-(soundhax).html
+++ b/de_DE/installing-boot9strap-(soundhax).html
@@ -386,11 +386,15 @@ window.cookieconsent.initialise({
-
3DS firmware 11.17.0 was recently released. Hier ist, was du wissen solltest:
+
The latest 3DS firmware is 11.17.0. Hier ist, was du wissen solltest:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
Diese Webseite verwendet Cookies, um Benutzern die Navigation durch die Anleitung zu erleichtern. Cookies ermöglichen es der Leiste an der Seite der Seite, den aktuellen Fortschritt auf der Website anzuzeigen, damit es Benutzern leichter fällt sich in der Anleitung zurechtzufinden.
-
Embedded Content From Other Websites
+
Eingebettete Inhalte von anderen Internetseiten
-
This site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves as if the user has visited the other website.
+
Diese Seite kann eingebettete Inhalte (z.B. Videos, Bilder, Artikel, etc.) enthalten. Eingebettete Inhalte von anderen Internetseiten verhalten sich so, als hätte der Benutzer die andere Internetseite besucht.
-
These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website.
+
Diese Internetseiten können Daten über dich sammeln, Cookies verwenden, zusätzliches Tracking von Drittanbietern einbetten und Ihre Interaktion mit diesen eingebetteten Inhalten überwachen, einschließlich der Verfolgung deiner Interaktion mit dem eingebetteten Inhalt, wenn du ein Konto auf dieser Internetseite besitzst und dort eingeloggt bist.
-
Analytics
+
Analytik
-
This site uses Google Analytics to monitor and analyze traffic. This site is hosted by Github Pages, which may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with this site. For more information about Github Pages as it relates to user privacy, see the GitHub Privacy Statement.
+
Diese Seite benutzt Google Analytics, um den Verkehr zu überwachen und zu analysieren. Diese Website wird von Github Pages gehostet, die möglicherweise Daten über dich sammeln, Cookies verwenden, zusätzliches Verfolgen von Dritten einbinden und deine Interaktion mit dieser Website überwachen können. For more information about Github Pages as it relates to user privacy, see the GitHub Privacy Statement.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1176,8 +1359,8 @@ You can check if your SD is being read by holding SELECT on boot and checking th
If this is the case, attempt the steps below, which are listed from easiest to hardest:
Power off your console, remove the SD card, re-insert it, then power on your console
-
Power off your console, remove the SD card, insert it on your PC, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
-
Power off your console, remove the SD card, insert it on your PC and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
+
Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
+
Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
Test your SD card for errors by following the guide according to your computer’s operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
+
+
+
+
+
+
Lesen erforderlich
+
+
To use the MSET9 exploit, you must update your console to the latest system version.
+
+
Was du benötigst
+
+
+
An internet connection on your console
+
+
+
Section I - Updating the System
+
+
+
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
+
+
The updater may display a message saying “Your system is up to date” instead of updating. This is normal if you are already up to date; continue to the next section
+
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
3DS / 3DS XL / 2DS consoles on firmware 11.17.0 do not currently have any free, software-only methods. Therefore, all of the methods here have some sort of prerequisite.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
Create a folder named Nintendo DSiWare inside of the <ID1>
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Open the output_(name) .zip file and navigate to China_Taiwan -> output_setup
Create a folder named Nintendo DSiWare inside of the <ID1>
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself.
+
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself. You can also have a chat with us in the #guide-meta channel at Nintendo Homebrew on Discord.
3DS firmware 11.17.0 was recently released. Esto es lo que deberías saber:
+
The latest 3DS firmware is 11.17.0. Esto es lo que deberías saber:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
I am on the latest system version. Is my console hackable without any external hardware/prerequisites?
-
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -598,7 +602,7 @@ window.cookieconsent.initialise({
I heard about this thing I have to pay for (Gateway, Sky3DS, ntrboot, R4, etc). Is that something I need?
-
At the moment, 3DS / 3DS XL / 2DS consoles on 11.17.0 need to use one of many alternate exploits to install custom firmware. If none of the other prerequisites are available, then ntrboot will be the cheapest available option (roughly $20 USD).
+
No. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
Lee detenidamente todas las páginas de introducción (incluido ésta) antes de proceder.
-
3DS firmware 11.17.0 was recently released. Esto es lo que deberías saber:
+
The latest 3DS firmware is 11.17.0. Esto es lo que deberías saber:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
Compatibility Notes
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
Qué necesitas
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
+
+
+
+
+
Instrucciones
+
+
Sección I - Preparativos
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
Power off your console
+
Inserta tu tarjeta SD en tu computadora
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Power on your console
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Power off your console
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
Inserta tu tarjeta SD en tu computadora
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
+
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
+
If the camera did NOT appear, you cannot follow this method. If this is the case, stay on your current firmware and ask Nintendo Homebrew on Discord for help.
+
If the camera did NOT appear, you cannot follow this method. If this is the case, use Installing boot9strap (MSET9) instead.
3DS firmware 11.17.0 was recently released. Esto es lo que deberías saber:
+
The latest 3DS firmware is 11.17.0. Esto es lo que deberías saber:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
Este sitio no recolecta información personal. This site may collect usage information in order to analyze interest in the content and to provide advertisers with information on an aggregate basis. Ningún tipo de información de identificación personal es compartida con empresas de publicidad de terceros.
+
Este sitio no recolecta información personal. Este sitio puede recopilar información de uso con el fin de analizar el interés en el contenido y proporcionar a los anunciantes información más completa. Ningún tipo de información de identificación personal es compartida con empresas de publicidad de terceros.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1175,8 +1358,8 @@ You can check if your SD is being read by holding SELECT on boot and checking th
If this is the case, attempt the steps below, which are listed from easiest to hardest:
Power off your console, remove the SD card, re-insert it, then power on your console
-
Power off your console, remove the SD card, insert it on your PC, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
-
Power off your console, remove the SD card, insert it on your PC and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
+
Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
+
Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
Test your SD card for errors by following the guide according to your computer’s operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
To use the MSET9 exploit, you must update your console to the latest system version.
+
+
What you need
+
+
+
An internet connection on your console
+
+
+
Section I - Updating the System
+
+
+
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
+
+
El actualizador podría mostrar un mensaje diciendo “La consola ya está actualizada” en lugar de actualizar. This is normal if you are already up to date; continue to the next section
+
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
3DS / 3DS XL / 2DS consoles on firmware 11.17.0 do not currently have any free, software-only methods. Therefore, all of the methods here have some sort of prerequisite.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
Créez un dossier nommé Nintendo DSiWare à l’intérieur de <ID1>
-
Si vous aviez déjà le dossier et qu’il y a des fichiers de sauvegarde DSiWare existants (<8-character-id>. in) à l’intérieur, copiez-les sur votre PC et retirez-les de votre carte SD
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Ouvrez le fichier output_(name) .zip et accédez à China_Taiwan -> output_setup
Créez un dossier nommé Nintendo DSiWare à l’intérieur de <ID1>
-
Si vous aviez déjà le dossier et qu’il y a des fichiers de sauvegarde DSiWare existants (<8-character-id>. in) à l’intérieur, copiez-les sur votre PC et retirez-les de votre carte SD
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself.
+
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself. You can also have a chat with us in the #guide-meta channel at Nintendo Homebrew on Discord.
Le logiciel système version 11.17.0 de la 3DS est sorti récemment. Voici ce que vous devriez savoir :
+
The latest 3DS firmware is 11.17.0. Voici ce que vous devriez savoir :
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
Je suis sur la dernière version du logiciel système. Is my console hackable without any external hardware/prerequisites?
-
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -598,7 +602,7 @@ window.cookieconsent.initialise({
J'ai entendu parler de ces choses pour lesquelles je dois payer (Gateway, Sky3DS, ntrboot, R4, etc). En ai-je besoin ?
-
At the moment, 3DS / 3DS XL / 2DS consoles on 11.17.0 need to use one of many alternate exploits to install custom firmware. If none of the other prerequisites are available, then ntrboot will be the cheapest available option (roughly $20 USD).
+
Non. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
Lisez attentivement toutes les pages d’introduction (y compris celle-ci !) avant de continuer.
-
Le logiciel système version 11.17.0 de la 3DS est sorti récemment. Voici ce que vous devriez savoir :
+
The latest 3DS firmware is 11.17.0. Voici ce que vous devriez savoir :
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
Notes de compatibilité
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
Ce dont vous avez besoin
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
+
+
+
+
+
Instructions
+
+
Section I - Préparatifs
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Power on your console
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Power off your console
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Réinsérez votre carte SD dans votre console
+
Power on your console
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
Insérez votre carte SD dans votre ordinateur
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
+
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
+
In this section, you will install custom firmware onto your console.
+
+
+
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
+
+
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
+
+
+
Once it is complete, press (A) to reboot your console
+
Your console should have booted into the Luma3DS configuration menu
+
+
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
+
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
+
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
+
+
+
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
+
+
+
Section IV - Uninstalling MSET9
+
+
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
+
+
Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+
+
+
Éteignez votre console
+
Insérez votre carte SD dans votre ordinateur
+
In the MSET9 window, type 4, then press Enter to remove MSET9
+
+
You should see “Removing… done”
+
+
+
Close the MSET9 window; you will not need it for any of the upcoming steps
+
+
+
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
+
+
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
+
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
If the camera did NOT appear, you cannot follow this method. If this is the case, stay on your current firmware and ask Nintendo Homebrew on Discord for help.
+
If the camera did NOT appear, you cannot follow this method. If this is the case, use Installing boot9strap (MSET9) instead.
Le logiciel système version 11.17.0 de la 3DS est sorti récemment. Voici ce que vous devriez savoir :
+
The latest 3DS firmware is 11.17.0. Voici ce que vous devriez savoir :
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1175,8 +1358,8 @@ You can check if your SD is being read by holding SELECT on boot and checking th
Si c’est le cas, essayez les étapes ci-dessous, qui sont listées du plus simple au plus difficile :
Power off your console, remove the SD card, re-insert it, then power on your console
-
Power off your console, remove the SD card, insert it on your PC, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
-
Power off your console, remove the SD card, insert it on your PC and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
+
Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
+
Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
Testez votre carte SD en suivant le guide correspondant au système d’exploitation de votre ordinateur : Windows, Linux, macOS. Si votre carte SD est marquée comme défectueuse, vous devrez remplacer votre carte SD
Il est possible que votre port carte SD soit cassé. Rejoignez Nintendo Homebrew sur Discord pour obtenir une aide approfondie
Si vous appréciez ce guide, nous acceptons les Dons.
+
+
+
+
+
+
Lecture requise
+
+
To use the MSET9 exploit, you must update your console to the latest system version.
+
+
Ce dont vous avez besoin
+
+
+
An internet connection on your console
+
+
+
Section I - Updating the System
+
+
+
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
+
+
La console peut afficher un message disant “Aucune mise à jour nécessaire” au lieu de faire une mise à jour. Ceci est normal si vous êtes déjà à jour ; passez à la section suivante.
+
Si vous obtenez une erreur, réglez vos paramètres DNS et proxy sur « Automatique »
3DS / 3DS XL / 2DS konzolok 11.17.0 firmware-rel jelenleg nem rendelkeznek semmilyen ingyenes, csak szoftveres metódussal. Így az összes itt található metódusnak van valamilyen előkövetelménye.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
Hozz létre egy Nintendo DSiWare nevű mappát az <ID1> mappában
-
Ha már van mappád és van benne DSiWare mentés fájl (<8-character-id>.bin), másold őket a számítógépedre és töröld őket az SD kártyáról
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Nyisd meg az output_(name) .zip fájlt és navigálj ide: China_Taiwan -> output_setup
Hozz létre egy Nintendo DSiWare nevű mappát az <ID1> mappában
-
Ha már van mappád és van benne DSiWare mentés fájl (<8-character-id>.bin), másold őket a számítógépedre és töröld őket az SD kártyáról
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Másold az F00D43D5.bin fájlt a BannerBomb3.zip-ből a Nintendo DSiWare mappába
Ez az útmutató nyílt forrású - a repository-ja elérhető itt. Ha úgy érzed, hogy probléma van az útmutatóval, beküldhetsz egy issue-t, hogy jelezd nekünk vagy egy pull request-et, hogy a módosításaid bekerüljenek.
+
Ez az útmutató nyílt forrású - a repository-ja elérhető itt. Ha úgy érzed, hogy probléma van az útmutatóval, beküldhetsz egy issue-t, hogy jelezd nekünk vagy egy pull request-et, hogy a módosításaid bekerüljenek. You can also have a chat with us in the #guide-meta channel at Nintendo Homebrew on Discord.
3DS firmware 11.17.0 nemrég került kiadásra. Amit érdemes tudnod:
+
The latest 3DS firmware is 11.17.0. Amit érdemes tudnod:
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
-
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Egészen pontosan a New3DS-család konzolainak egy ingyenes szoftver metódust, míg az Old3DS-család konzolainak alternatív exploitokat kell használniuk, aminek külső hardver vagy szoftver függősége van.
+
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá. The methods on earlier firmwares are easier and more stable.
+
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
A legújabb verziójú rendszeren vagyok. Feltörhetem a konzolomat külső hardver vagy előfeltételek nélkül?
-
A válasz a konzol típusától függően változik. Jelenleg a New 3DS / New 3DS XL / New 2DS XL moddolható a 11.17.0 verzión előfeltételek nélkül (pl. eShop címek, fizikai tételek), míg a 3DS / 3DS XL / 2DS további szoftvert vagy hardvert igényel.
+
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -598,7 +602,7 @@ window.cookieconsent.initialise({
Hallottam erről a dologról (Gateway, Sky3DS, ntrboot, R4, stb), amiért fizetnem kell. Szükségem lesz ilyesmire?
-
Jelenleg a 3DS / 3DS XL / 2DS konzolok 11.17.0 verzión egyet a sok alternatív exploit-ok közül kell válasszanak, hogy egyedi firmware-t telepíthessenek. Ha egyike sem elérhető az előkövetelményeknek, akkor az ntrboot lehet a legolcsóbb elérhető opció (körülbelül $20 USD).
+
Nem. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
A 3DS-mód flashcart-ok, mint a Gateway és a Sky3DS nem ajánlottak, mert elavultak és a ban vagy brick kockázatát hordják magukban.
Alaposan olvasd végig az összes bevezető oldalt (beleértve ezt is) mielőtt bármibe belekezdenél.
-
3DS firmware 11.17.0 nemrég került kiadásra. Amit érdemes tudnod:
+
The latest 3DS firmware is 11.17.0. Amit érdemes tudnod:
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
-
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Egészen pontosan a New3DS-család konzolainak egy ingyenes szoftver metódust, míg az Old3DS-család konzolainak alternatív exploitokat kell használniuk, aminek külső hardver vagy szoftver függősége van.
+
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá. The methods on earlier firmwares are easier and more stable.
+
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
Kompatibilitási megjegyzések
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
Amire szükséged lesz
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Ellenőrizd egy terminál megnyitásával, majd a python3 -V parancs megadásával. Ha ez egy verziószámot ad vissza, működni fog ezzel az útmutatóval.
+
+
+
+
+
Lépések
+
+
I. rész - Előkészületek
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
Kapcsold ki a konzolod
+
Helyezd az SD kártyád a számítógépbe
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Kapcsold be a konzolod
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Kapcsold ki a konzolod
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Tedd vissza az SD kártyád a konzoldba
+
Kapcsold be a konzolod
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
Helyezd az SD kártyád a számítógépbe
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
+
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
+
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
+
+
+
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+
+
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
+
+
+
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
+
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
+
+
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
+
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
+
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
+
+
+
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
+
+
+
Section IV - Uninstalling MSET9
+
+
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
+
+
Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+
+
+
Kapcsold ki a konzolod
+
Helyezd az SD kártyád a számítógépbe
+
In the MSET9 window, type 4, then press Enter to remove MSET9
+
+
You should see “Removing… done”
+
+
+
Close the MSET9 window; you will not need it for any of the upcoming steps
+
+
+
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
+
+
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Válaszd a SH2E-xxx.TXT fájlt, majd nyomj “OK”-t, azután “Yes”-t a végrehajtásához
+
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
Ekkor a konzolodnak be kell bootolnia a Homebrew Launcher-be
Indítsd el a nimdsphax-et a homebrew listájáról
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
diff --git a/hu_HU/installing-boot9strap-(soundhax).html b/hu_HU/installing-boot9strap-(soundhax).html
index 0aa927a3b8..385c16cdc3 100644
--- a/hu_HU/installing-boot9strap-(soundhax).html
+++ b/hu_HU/installing-boot9strap-(soundhax).html
@@ -386,71 +386,75 @@ window.cookieconsent.initialise({
-
3DS firmware 11.17.0 nemrég került kiadásra. Amit érdemes tudnod:
+
The latest 3DS firmware is 11.17.0. Amit érdemes tudnod:
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
-
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Egészen pontosan a New3DS-család konzolainak egy ingyenes szoftver metódust, míg az Old3DS-család konzolainak alternatív exploitokat kell használniuk, aminek külső hardver vagy szoftver függősége van.
+
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá. The methods on earlier firmwares are easier and more stable.
+
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Kapcsold be a konzolod
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Kapcsold be a konzolod
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1180,8 +1363,8 @@ Ellenőrizheted, hogy az SD kártyád olvasásra kerül-e a SELECT gomb nyomva t
Ha ez a helyzet, próbáld meg a lépéseket alább, ami a legkönnyebbtől a legnehezebbig került felsorolásra:
Kapcsold ki a konzolod, vedd ki majd tedd vissz az SD kártyát, majd kapcsold be újra a konzolod
-
Kapcsold ki a konzolod, távolítsd el az SD kártyád, majd csatlakoztasd a PC-dhez. Töltsd le a legutolsó kiadását az Luma3DS-nek és csomagold ki a Luma3DS.zip fájlból a boot.firm fájlt, majd rakd az SD kártyád gyökerébe (felülírva bármilyen létező fájlt)
-
Kapcsold ki a konzolod, távolítsd el az SD kártyát, csatlakoztasd a PC-dhez és formázd újra az SD kártyád az operációs rendszerednek megfelelően: Windows, macOS, Linux(ez törölni fogja az SD kártya adatait)
+
Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
+
Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
Teszteld az SD kártyádat hibákra az operációs rendszerednek megfelelő útmutató szerint haladva: Windows, Linux, macOS. Ha az SD kártyád hibásnak jelölt, cserélned kell az SD kártyádat
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
+
+
+
+
+
+
Fontos tudnivalók
+
+
To use the MSET9 exploit, you must update your console to the latest system version.
+
+
Amire szükséged lesz
+
+
+
Internet elérés a konzolodon
+
+
+
I. rész - A rendszer frissítése
+
+
+
Frissítsd a konzolod következőképp: Lépj be a System Settings-be, majd az “Other settings”-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a “System Update” opciót
+
+
A frissítő elképzelhető, hogy megjeleníti a “Your system is up to date” üzenetet a frissítés helyett. Ez normális, ha már frissítettél; folytasd a következő szakasszal
+
Ha ez hibát ad, akkor állítsd a DNS és Proxy beállításodat egyaránt “Auto”-ra
Le console 3DS / 3DS XL / 2DS con versione del software 11.17.0 non hanno attualmente alcun metodo gratuito e senza dispositivi esterni. Pertanto, tutti i metodi qui hanno dei prerequisiti.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
In alternativa, SmileBASIC (un gioco a pagamento; solo in formato digitale) può essere utilizzato per accedere all’Homebrew Launcher senza utilizzare Seedminer.
Se hai una copia della versione 2.2 US del gioco DSiWare Petit Computer (a pagamento; solo digitale) è possibile utilizzarla per installare boot9strap.
Crea una cartella chiamata Nintendo DSiWare all’interno di <ID1>
-
Se hai già la cartella e sono già presenti dei file di backup DSiWare (<id-a-8-caratteri>.bin) all’interno, copiali sul PC e rimuovili dalla scheda SD
+
Se hai già la cartella e sono già presenti dei file di backup DSiWare (<id-a-8-caratteri>.bin) all’interno, copiali sul computer e rimuovili dalla scheda SD
Apri il file .zip output_(nome) e naviga su China_Taiwan -> output_setup
Crea una cartella chiamata Nintendo DSiWare all’interno di <ID1>
-
Se hai già la cartella e sono già presenti dei file di backup DSiWare (<id-a-8-caratteri>.bin) all’interno, copiali sul PC e rimuovili dalla scheda SD
+
Se hai già la cartella e sono già presenti dei file di backup DSiWare (<id-a-8-caratteri>.bin) all’interno, copiali sul computer e rimuovili dalla scheda SD
Copia il file F00D43D5.bin da BannerBomb3.zip nella cartella Nintendo DSiWare
Questa guida è open source; il nostro repository è disponibile qui. Se hai notato un problema su questa guida, puoi inviare una segnalazione per farcelo sapere, o inviare una pull request per apportare autonomamente le modifiche necessarie.
+
Questa guida è open source; il nostro repository è disponibile qui. Se hai notato un problema su questa guida, puoi inviare una segnalazione per farcelo sapere, o inviare una pull request per apportare autonomamente le modifiche necessarie. Puoi anche chiacchierare con noi nel canale #guide-meta su Nintendo Homebrew su Discord.
Recentemente è stata rilasciata la versione del software 3DS 11.17.0. Ecco cosa dovresti sapere:
+
The latest 3DS firmware is 11.17.0. Ecco cosa dovresti sapere:
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
-
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Nello specifico, tutte le console della famiglia New3DS hanno un metodo con software gratuito, mentre i modelli della famiglia Old3DS dovranno usare exploit alternativi che si basano su hardware o software esterni.
+
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda. The methods on earlier firmwares are easier and more stable.
+
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
Ho installato l'ultima versione di sistema. Posso modificare la mia console senza hardware esterno o altro?
-
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -598,7 +602,7 @@ window.cookieconsent.initialise({
Ho sentito di questa cosa per cui dovrei pagare (Gateway, Sky3DS, ntrboot, R4, ecc). È qualcosa di cui ho bisogno?
-
Al momento, le console 3DS / 3DS XL / 2DS su 11.17.0 devono utilizzare uno dei tanti exploit alternativi per installare un custom firmware. Se non è disponibile nessuno degli altri prerequisiti, allora ntrboot sarà l’opzione più economica (circa 20 Euro).
+
No. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
Le flashcart in modalità 3DS come Gateway e Sky3DS non sono consigliate perché obsolete e possono comportare il ban o il rischio di brickare la console.
Leggi attentamente tutte le pagine introduttive (compresa questa!) prima di continuare.
-
Recentemente è stata rilasciata la versione del software 3DS 11.17.0. Ecco cosa dovresti sapere:
+
The latest 3DS firmware is 11.17.0. Ecco cosa dovresti sapere:
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
-
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Nello specifico, tutte le console della famiglia New3DS hanno un metodo con software gratuito, mentre i modelli della famiglia Old3DS dovranno usare exploit alternativi che si basano su hardware o software esterni.
+
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda. The methods on earlier firmwares are easier and more stable.
+
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
Se hai gradito questa guida, accettiamo Donazioni.
+
+
+
+
+
+
+
+
+Dettagli Tecnici (opzionale)
+
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
Note di Compatibilità
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
Cosa serve
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Controlla aprendo un terminale e inserendo python3 -V. Se il comando restituisce un numero di versione, funzionerà per questa guida.
+
+
+
+
+
Istruzioni
+
+
Sezione I - Preparazione
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Accendi la tua console
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Spegni la tua console
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinserisci la scheda SD nella tua console
+
Accendi la tua console
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
Inserisci la scheda SD nel tuo computer
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
+
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
+
In questa sezione installerai il custom firmware sulla tua console.
+
+
+
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+
+
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
+
+
+
Una volta completato tutto, premi (A) per riavviare la console
+
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
+
+
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
+
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
+
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
+
+
+
Premi (Start) per salvare e riavviare il 3DS
+
+
+
Section IV - Uninstalling MSET9
+
+
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
+
+
Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+
+
+
Spegni la tua console
+
Inserisci la scheda SD nel tuo computer
+
In the MSET9 window, type 4, then press Enter to remove MSET9
+
+
You should see “Removing… done”
+
+
+
Close the MSET9 window; you will not need it for any of the upcoming steps
+
+
+
A questo punto, la console avvierà sempre Luma3DS.
+
+
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se la fotocamera NON è apparsa, non è possibile seguire questo metodo. Se questo è il caso, rimani alla tua versione corrente e chiedi aiuto nel canale Nintendo Homebrew su Discord.
+
Se la fotocamera NON è apparsa, non è possibile seguire questo metodo. If this is the case, use Installing boot9strap (MSET9) instead.
Make sure SmileBASIC is updated to the latest version
+
Assicurati che SmileBASIC sia aggiornato all’ultima versione
Spegni la tua console
Inserisci la scheda SD nel tuo computer
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
@@ -557,26 +561,25 @@ window.cookieconsent.initialise({
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
Copia il file new3ds_JPN.bin o old3ds_JPN.bin (a seconda del modello) da otherapps_with_CfgS_11.17.zip nella directory principale della tua scheda SD, quindi rinomina il payload in otherapp.bin
Non aggiungere l’estensione .bin se non la vedi presente
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Copia il file petitcom .icn per la tua regione nella directory principale della tua scheda SD
+
Trasferisci il file SH2E-JPN.300.wav dall’archivio .zip di Release_sh2e a un dispositivo in grado di riprodurre i file .wav, ad esempio un telefono
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
+
Entra nella cartella Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
Recentemente è stata rilasciata la versione del software 3DS 11.17.0. Ecco cosa dovresti sapere:
+
The latest 3DS firmware is 11.17.0. Ecco cosa dovresti sapere:
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
-
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Nello specifico, tutte le console della famiglia New3DS hanno un metodo con software gratuito, mentre i modelli della famiglia Old3DS dovranno usare exploit alternativi che si basano su hardware o software esterni.
+
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda. The methods on earlier firmwares are easier and more stable.
+
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Accendi la tua console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Accendi la tua console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1175,8 +1358,8 @@ Puoi controllare se la tua SD non viene letta tenendo premuto SELECT all’avvio
Se è questo il caso, prova a seguire i seguenti passaggi, indicati dal più semplice al più complesso:
Spegni la tua console, rimuovi la scheda SD, reinseriscila, quindi accendi la tua console
-
Spegni la console, rimuovi la scheda SD, inseriscila sul tuo PC, scarica l’ultima versione di Luma3DS, estrai il file boot.firm dall’archivio Luma3DS.zip e posizionalo nella directory principale della tua scheda SD (sostituendo qualunque file preesistente)
-
Spegni la console, rimuovi la scheda SD, inseriscila sul tuo PC e formatta la scheda SD secondo il sistema operativo del computer: Windows, macOS, Linux(questo cancellerà i dati della tua scheda SD)
+
Spegni la console, rimuovi la scheda SD, inseriscila sul tuo computer, scarica l’ultima versione di Luma3DS, estrai il file boot.firm dall’archivio Luma3DS.zip e posizionalo nella directory principale della tua scheda SD (sostituendo qualunque file preesistente)
+
Spegni la console, rimuovi la scheda SD, inseriscila sul tuo computer e formatta la scheda SD secondo il sistema operativo del computer: Windows, macOS, Linux(questo cancellerà i dati della tua scheda SD)
Verifica la presenza di eventuali errori nella tua scheda SD seguendo la guida corretta per il sistema operativo del tuo computer: Windows, Linux, macOS. Se la tua scheda SD è contrassegnata come difettosa, allora dovrai sostituirla
Se hai gradito questa guida, accettiamo Donazioni.
+
+
+
+
+
+
Lettura necessaria
+
+
To use the MSET9 exploit, you must update your console to the latest system version.
+
+
Cosa serve
+
+
+
Una connessione internet sulla tua console
+
+
+
Sezione I - Aggiornare il Sistema
+
+
+
Aggiorna la console andando su Impostazioni della console, poi “Impostazioni generali”, infine scorri a destra e seleziona “Aggiornamento”
+
+
Potrebbe apparire il messaggio “Nella console è già presente il software di sistema più recente”. È normale se hai già installato l’ultima versione; prosegui con la sezione successiva
+
Se ottieni un errore, imposta sia i DNS sia il Proxy su “Auto”
펌웨어 11.17.0의 3DS / 3DS XL/ 2DS 콘솔에는 현재 무료 소프트웨어 전용 방법이 없습니다. 따라서 여기에 있는 모든 방법에는 일종의 전제 조건이 있습니다.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
If you see GodMode9, Decrypt9WIP, Hourglass9, or Luma3DS chainloader, you held (Start) by accident and should try these instructions again with (Select)
+
만약 GodMode9/Decrypt9WIP/Hourglass9/Luma3DS chainloader를 보았다면 Select가 아닌 Start 버튼을 누른 것입니다. Select 버튼을 눌러 주세요
We’re glad to hear that you’d like to contribute to 3ds.hacks.guide! 기여할 수 있는 방법은 몇가지가 있습니다.
+
3ds.hacks.guide에 기여해 주신다니 기쁩니다! 기여할 수 있는 방법은 몇가지가 있습니다.
유지보수
-
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself.
+
이 가이드는 오픈소스이며, 저장소는 여기서 확인하실 수 있습니다. 이 가이드에서 문제가 발견된 경우 문제를 제출하여 우리에게 알리거나 직접 가이드를 수정할 수 있습니다. You can also have a chat with us in the #guide-meta channel at Nintendo Homebrew on Discord.
번역
-
If you’d like to translate this guide into other languages (or help keep the existing translations up-to-date), check out our Crowdin.
+
만약 이 가이드를 다른 언어로 번역하고 싶다면 (혹은 현 번역들을 최신으로 하고 싶다면) 저희의 Crowdin를 확인해 주세요.
Maintaining this guide (as well as our support channels) is primarily a volunteer effort, so if this guide has helped you in some way, donations are greatly appreciated!
+
이 가이드의 유지보수는 (저희의 서포트 채널 포함) 메인으로는 봉사적인 행동이지만, 이 가이드가 어떠한 방식으로나 도움을 드렸다면, 기부도 환영합니다!
The latest 3DS firmware is 11.17.0. 다음 사항을 참고해 주세요.
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
-
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요. The methods on earlier firmwares are easier and more stable.
+
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
제 콘솔은 최신 버전입니다, 외부 하드웨어나 전제 조건 없이 내 콘솔을 해킹할 수 있습니까?
-
본체 모델에 따라 다릅니다. 현재 New 3DS, New 3DS XL, New 2DS XL은 11.17.0 버전에서 별도의 준비물(e숍 타이틀, 물리적인 장비) 없이 수정이 가능합니다. 하지만 3DS, 3DS XL, 2DS의 경우 추가적인 소프트웨어 혹은 장비가 필요합니다.
+
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -568,7 +572,7 @@ window.cookieconsent.initialise({
-Can I keep my NNID, saves, digital games (etc.)?
+저의 NNID, 게임 세이브, 디지털 게임을 유지할 수 있나요?
NNID는 닌텐도 네트워크 ID의 약칭이며, 본 가이드에서 NNID 걱정은 하지 않아도 됩니다. 한국 (KOR), 중국 (CHN), 타이완 (TWN) 콘솔들에는 NNID 기능이 존재하지 않습니다. 만약 북미, 호주, 유럽 등 다른 지역의 콘솔을 한국으로 지역 변경 할 계획이라면 시리얼 번호를 유심히 보고 해당 문서의 주의사항을 각별히 읽은 후 진행하세요.
@@ -598,7 +602,7 @@ window.cookieconsent.initialise({
Gateway나 Sky3DS, ntrboot, R4와 같은 뭔가를 돈주고 사야한다고 들었는데, 그 중에서 필요한 게 있나요?
-
현재 버전 11.17.0에 있는 3DS, 3DS XL, 2DS 콘솔은 여러 다른 취약점을 사용해야 커스텀 펌웨어를 설치할 수 있습니다. 필요한 추가 사항이 없다면, ntrboot 방식이 가장 저렴할 것입니다 (약 20 미국 달러).
+
아니오. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
Gateway와 Sky3DS같은 3DS용 플래시카트들은 불필요하고 벽돌을 유발할 수 있어 권장되지 않습니다.
If you don’t want one of these applications, you can remove them after you have finished this page by navigating to System Settings -> Data Management -> Nintendo 3DS -> Software. (GodMode9 cannot be removed in this way and is generally required for other functions.)
+
해당 프로그램이 필요하지 않은 경우 본 페이지에 적힌 모든 설정이 완료된 뒤에 본체 설정 -> 데이터 관리 -> Nintendo 3DS -> 소프트웨어 관리에서 지울 수 있습니다. (GodMode9은 이 방식으로 지울 수 없으며 또한 다른 기능들을 위해 필요합니다.)
(L 어깨) + (십자 Down) + (Select) 을 동시에 눌러서 Rosalina 메뉴를 실행해 주세요
-
If one of these buttons is broken, download config.ini and put it in your luma folder, replacing the existing one. This will change the Rosalina menu key combination to (X) + (Y)
+
만일 이들 중 하나의 버튼이 고장났을 경우, config.ini 파일을 받아 luma 폴더에 덮어쓰기 해주세요. 이 파일은 Rosalina 키 조합을 (X) + (Y)로 바꿉니다
(Start) 를 길게 누르고, 이 상태에서 콘솔의 전원을 켜 주세요. GodMode9이 실행될 겁니다
-
If you do not boot into GodMode9, ensure that you copied the three folders from finalizing.zip to the root of your SD card and that the folders are not misnamed (e.g. luma (1))
+
If you do not boot into GodMode9, ensure that you copied the three folders from finalizing.zip to the root of your SD card and that the folders are not misnamed (e.g. ‘luma (1)’)
만약 “Essential files backup not found” 메세지가 표시되면, (A) 룰 눌러서 하세요. 백업이 끝나면 (A) 를 눌러서 진행해 주세요
Holding (Select) on boot will launch the Luma3DS configuration menu.
-
Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in /luma/payloads/, the Luma3DS chainloader.
-
By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. 이 콤보는 Rosalina 메뉴에서 변경될 수 있습니다.
-
Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. 목록을 위해서는 체인지로그를 확인해 주세요.
+
(Select)를 누른 채 콘솔을 부팅시키면 Luma3DS 설정 메뉴가 실행됩니다.
+
(Start)를 누른 채 콘솔을 부팅시키면 GodMode9이나, /luma/payloads/에 페이로드를 여러 개 넣고 있다면, Luma3DS 체인로더가 실행됩니다.
+
기본으로는, 3DS 모드에 있을 때 (L) + (십자 아래) + (Select)를 누르면 Rosalina 메뉴가 열리며, 시스템 정보를 보거나, 스크린샷을 찍거나, 치트를 활성화시키는 등의 작업을 할 수 있습니다. 이 콤보는 Rosalina 메뉴에서 변경될 수 있습니다.
+
(Start) + (Select) + (X)를 누른 채 콘솔을 부팅시키면 알림 LED가 색을 표시할 겁니다. 이는 디버그를 위해 사용됩니다. 목록을 위해서는 변경사항를 확인해 주세요.
If you do not see a custom menu (your console just boots to the HOME Menu), you may proceed to the next section
+
커스텀 메뉴가 아닌 HOME 메뉴로 부팅이 되었다면 다음 섹션으로 진행할 수 있습니다
-
If you see the Luma3DS configuration screen or any other custom menu (e.g. GodMode9, Decrypt9WIP), STOP - you already have custom firmware! 이 섹션으로 진행해 주세요.
+
만약 Luma3DS 구성 화면 또는 기타 커스텀 메뉴 (예: GodMode9/Decrypt9WIP)가 표시되면 멈추세요 - 커스텀 펌웨어가 이미 설치되어 있습니다! 이 섹션으로 진행해 주세요.
The latest 3DS firmware is 11.17.0. 다음 사항을 참고해 주세요.
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
-
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요. The methods on earlier firmwares are easier and more stable.
+
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
로컬 멀티플레이어로 진입해 주세요. (언어별로 메뉴 이름이 다를 수 있음) 메뉴가 표시될 것입니다
+
로컬 통신 플레이로 진입해 주세요. (언어별로 메뉴 이름이 다를 수 있음) 메뉴가 표시될 것입니다
-
If the screen freezes, hold the power button for fifteen seconds to force power off your console, then try again
-
If you have launched kartdlphax previously, the last selected settings will be loaded. 그 설정이 맞다면, Use settings를 누르고 다음 세 과정을 건너뛰어주세요. 설정이 다르다면 Change settings를 눌러 계속해 주세요
+
화면이 멎는다면, 전원 버튼을 약 15초간 길게 눌러 전원을 강제 종료하고, 다시 시도해 주세요
+
이전에 kartdlphax를 실행한 적이 있다면, 마지막으로 지정한 설정이 로드됩니다. 그 설정이 맞다면, Use settings를 누르고 다음 세 과정을 건너뛰어주세요. 설정이 다르다면 Change settings를 눌러 계속해 주세요
타겟 3DS의 콘솔 종류를 선택해 주세요 (Old 3DS family 또는 New 3DS family)
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
콘솔이 프리징에 걸렸다가 크래시되는 경우, Launcher.dat 파일이 SD 카드의 루트에 있는지 확인하세요
익스플로잇이 성공적이었다면 Homebrew Launcher로 부팅되었을 것입니다
홈브류 목록에서 nimdsphax를 실행해 주세요
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
빨간색 화면에서 콘솔이 멈추는 경우, 전원 버튼을 길게 눌러 전원을 끈 다음 다시 전원을 켜고 HOME 메뉴의 설정 아이콘을 눌러 menuhax를 다시 실행해 보세요
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+
콘솔이 프리징에 걸렸다가 크래시되는 경우, Launcher.dat 파일이 SD 카드의 루트에 있는지 확인하세요
익스플로잇이 성공적이었다면 Homebrew Launcher로 부팅되었을 것입니다
홈브류 목록에서 nimdsphax를 실행해 주세요
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
+
빨간색 화면에서 콘솔이 멈추는 경우, 전원 버튼을 길게 눌러 전원을 끈 다음 다시 전원을 켜고 HOME 메뉴의 설정 아이콘을 눌러 menuhax를 다시 실행해 보세요
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
호환성 안내
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
준비물
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
+
+
+
+
+
진행 방법
+
+
섹션 I - 준비 작업
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
콘솔의 전원을 꺼 주세요
+
SD 카드를 컴퓨터에 삽입해 주세요
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
콘솔의 전원을 켜 주세요
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
콘솔의 전원을 꺼 주세요
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
SD 카드를 콘솔에 다시 삽입해 주세요
+
콘솔의 전원을 켜 주세요
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
SD 카드를 컴퓨터에 삽입해 주세요
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
-
Copy everything inside the folder for your console’s region and version (arm11code.bin and browserhax_hblauncher_ropbin_payload.bin) in the super-skaterhax .zip to the root of your SD card
+
super-skaterhax .zip 파일 속, 콘솔 지역과 버전에 맞는 폴더 안의 모든 파일들(‘arm11code.bin’ 과 ‘browserhax_hblauncher_ropbin_payload.bin’)을 SD 카드의 루트에 복사해 주세요
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
The latest 3DS firmware is 11.17.0. 다음 사항을 참고해 주세요.
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
-
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요. The methods on earlier firmwares are easier and more stable.
+
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
콘솔을 수정함으로서, 여러분은 온라인 플레이로부터 차단되거나 벽돌이 되는 것(콘솔이 작동하지 않는 현상)에 대한 희박한, 하지만 0은 아닌 가능성을 염두에 두어야 합니다. 파일을 잘못 넣는다고 콘솔이 벽돌이 되지는 않지만, 의도적으로 순서를 건너뛴다면 벽돌이 될 수도 있습니다. 비슷하게, 마지막 대량 밴은 5년 이상 전에 진행되었지만, 미래에 그런 일이 절대로 벌어지지 않는다고 단정지을 수 없습니다.
-File placement terminology (e.g. "root of SD")
+파일 위치 용어 (예 - "SD 카드 루트")
-
When copying files to the SD card, it is important to copy them to the right location - otherwise, the console will not detect the file and the exploit or software you are trying to use will not work. A term you will see frequently on this guide is root of the SD card, which means you are not inside any folder on your SD card. The directory that appears when you first open your SD card on your computer is called the ‘root’.
+
SD 카드에 파일을 복사할 때 올바른 위치에 넣는 것이 중요합니다. 그렇지 않으면 콘솔에서 파일을 감지하지 못하고 사용하려는 취약점이나 소프트웨어가 작동하지 않습니다. 이 가이드에서는 SD 카드의 “루트”라는 용어를 자주 볼 수 있습니다. 이는 SD 카드의 어떠한 폴더에도 들어가있지 않다는 것을 의미합니다. 컴퓨터에서 SD 카드를 처음 열 때 나타나는 디렉터리를 ‘루트’라고 합니다.
-
You may also see folder names indicated like this: /folder/. The slashes are used to indicate directories and are not part of the name of the folder. For example, /folder1/folder2/ would refer to folder2 inside of folder1:
+
또한 ‘/폴더/’와 같이 표시된 폴더 이름도 볼 수 있습니다. 슬래시(“/”)는 디렉토리를 나타내는 데 사용되며 폴더 이름의 일부가 아닙니다. 예를 들어, “/폴더1/폴더2”는 폴더1 안에 있는 폴더2를 의미합니다.
-
Angle brackets (< and >) are also occasionally used to refer to system-specific identifiers. For example, if the guide says <ID0>, it is referring to the system-specific identifier inside of the Nintendo 3DS folder, rather than a folder literally named “ID0”:
+
앵글 브래킷 (< and >)은 시스템 식별자를 나타내는 데에 사용됩니다. 예를 들어, 가이드가 ‘'을 표시한다면 문자 그대로 "ID0"이라 명명된 폴더가 아니라 'Nintendo 3DS' 폴더 내의 시스템별 식별자를 의미합니다.
-Downloading files from GitHub
+GitHub에서 파일 다운로드
-
In this guide, you will copy files that are downloaded on your computer/phone to your console’s SD card. Many of these files come from GitHub, which is a website used by developers to publish their open-source releases. When downloading files from GitHub, you should download the file that isn’t source code.
+
이 가이드를 통해 컴퓨터나 핸드폰으로 다운받은 파일을 3DS의 SD 카드로 복사하게 됩니다. 이러한 파일의 대부분은 개발자가 오픈 소스 릴리즈를 게시하는 데 사용하는 웹사이트인 GitHub에서 제공됩니다. GitHub에서 파일을 다운로드할 때에는 소스 코드가 아닌 파일을 다운로드해야 합니다.
이 방법은 게임 카드 또는 디지털 버전의 마리오 카트 7 게임을 사용합니다. Using the movable.sed file, you can modify Mario Kart 7’s SD card data that will give you access to Homebrew Launcher, which will be used for further exploitation.
+
이 방법은 게임 카드 또는 디지털 버전의 마리오 카트 7 게임을 사용합니다. movable.sed 파일을 사용하여, 마리오 카트 7의 SD 카드 데이터를 개조하여 Homebrew Launcher 접근 권한을 획득하여 이후의 취약점 공략에 사용할 수 있습니다.
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don’t know what those are or do not have the hardware necessary, join Nintendo Homebrew on Discord, open the “#mii-mining-assistance” channel and provide the following:
+
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. 위 사항에 대해서 잘 모르거나 필요한 하드웨어가 없을 경우, Nintendo Homebrew Discord 서버 에 들어간 다음, “#mii-mining-assistance” 채널에 들어가 다음 사항을 따라주세요
Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
Your console’s ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see this troubleshooting section if you have multiple)
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
Power on your console while the SD card is inserted
Open the Mii Maker app
-
Tap the “QR Code/Image Options” button
-
Tap “Save Mii as QR Code”
+
“QR Code/이미지 파일” 버튼을 눌러 주세요
+
“Mii QR Code를 만들기”를 눌러 주세요
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
웹사이트에서 movable.sed 파일을 해킹할 수 없다고 확정했습니다. 정확한 ID0를 제공했는지 확인해주세요. 만약 ID0가 정확하다면, Seedminer를 통한 방법은 불가능하며 다른 방법을 이용해야 합니다.
-
If you have a New 3DS / New 3DS XL / New 2DS XL (as indicated by the four shoulder buttons on the back and the C-Stick on the right), you can follow Installing boot9strap (super-skaterhax). 그 외에는 추가 하드웨어가 필요한 방법을 시도해야 할 수 있습니다.
+
만약 New 3DS / New 3DS XL / New 2DS XL (뒤에 4개의 어깨 버튼과 함께 오른쪽에 C-스틱이 달린 것들) 을 가지고 계시다면, boot9strap 설치 (super-skaterhax) 방법을 따라해볼 수 있습니다. 그 외에는 추가 하드웨어가 필요한 방법을 시도해야 할 수 있습니다.
@@ -647,7 +652,7 @@ window.cookieconsent.initialise({
DSiWare 관리 메뉴가 BB3 multihax 메뉴를 표시하지 않고 깨짐
-
F00D43D5.bin이 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 폴더 내에 있는 유일한 파일이어야 합니다. If it is, then re-create it with the Bannerbomb3 Injector.
+
F00D43D5.bin이 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 폴더 내에 있는 유일한 파일이어야 합니다. 만약 그렇다면, BannerBomb3 툴에서 다시 생성해 주세요.
또한, bb3.bin이 SD 카드의 최상위 디렉토리에 있어야 합니다. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.
F00D43D5.bin 파일에 문제가 있습니다. (잘못된 파일이거나 다른 3DS용 파일) Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
+
F00D43D5.bin 파일에 문제가 있습니다. (잘못된 파일이거나 다른 3DS용 파일) 해당 콘솔의 movable.sed 파일을 이용해, BannerBomb3 툴에서 F00D43D5.bin 파일을 다시 생성해 주세요.
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
익스플로잇을 다시 시도해 주세요
-
Try changing the system language to something other than the current language
+
시스템 언어를 현재 언어가 아닌 다른 언어로 변경해 보세요
@@ -916,12 +921,190 @@ window.cookieconsent.initialise({
-An exception occured or "DLL_HEAP_INFORMATION" when pressing GO!
+"GO! GO!" 선택 시 "An exception occurred" 또는 오류 화면이 표시됩니다
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
콘솔의 전원을 켜 주세요
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
콘솔의 전원을 켜 주세요
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.
White: Your 3DS was not able to find boot.firm on your SD card or on internal memory.
-
Magenta: Your 3DS was not able to find boot.firm on your SD card. 내부 메모리에 있는 boot.firm을 확인했으나, 파일이 손상되었습니다.
-
Red: Your 3DS was able to find boot.firm on both your SD card and on internal memory, but both files are corrupted.
+
하얀색: SD 카드 혹은 내부 메모리에서 boot.firm을 찾지 못했습니다.
+
다홍색: SD 카드에서 boot.firm을 찾지 못했습니다. 내부 메모리에 있는 boot.firm을 확인했으나, 파일이 손상되었습니다.
+
빨간색: boot.firm 파일을 찾았지만, SD 카드와 내부 메모리에 있는 파일 모두가 손상되었습니다.
Luma3DS의 최신 버전을 다운받아 압축을 해제해, 새 boot.firm 파일을 SD 카드의 루트 디렉토리에 넣어주세요. (파일이 이미 있다면 덮어씌워주세요.) boot.firm 파일이 계속 문제가 있는 것으로 인식된다면, SD 카드에 문제가 있는지 확인해야 할 수 있습니다: (Windows, Linux, or macOS) 또, WinRAR로 압축 해제한 파일은 3DS에서 문제를 자주 일으키는 것으로 알려져 있습니다.
@@ -1239,9 +1422,9 @@ SD 카드가 읽혔는지 확인하려면 SELECT를 누른 채 부팅해 아래
-Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher
+HOME 메뉴 실행시 크래시가 발생하거나 Homebrew Launcher가 실행될 경우
-
Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of menuhax67 (the menuhax .zip), then follow the “Uninstall menuhax67” section here.
+
menuhax67가 여전히 설치되어 있는 듯합니다. To uninstall menuhax67, download the latest release of menuhax67 (the menuhax .zip), then follow the “Uninstall menuhax67” section here.
@@ -1288,9 +1471,9 @@ SD 카드가 읽혔는지 확인하려면 SELECT를 누른 채 부팅해 아래
-Manually entering Homebrew Launcher
+Homebrew Launcher 수동 접근
-
If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need boot.3dsx and boot.firm on the root of your SD card.)
+
HOME 메뉴를 통해 Homebrew Launcher 애플리케이션에 접근이 불가능할 경우, 다음 방법을 통해 수동으로 Homebrew Launcher에 접근할 수 있습니다. (You will need boot.3dsx and boot.firm on the root of your SD card.)
다운로드 플레이 앱을 실행해 주세요 ()
@@ -1314,7 +1497,7 @@ SD 카드가 읽혔는지 확인하려면 SELECT를 누른 채 부팅해 아래
-Turning off Parental Controls
+청소년 보호 기능 끄기
You can disable the Parental Controls feature by going to System Settings -> Parental Controls and inserting the PIN, then pressing “Clear Settings”, then “Delete” to remove it.
However, if you do not know the PIN and therefore cannot access the console’s settings, you will need to disable it. In order to do this, you need to obtain your console’s master key (mkey):
3DS / 3DS XL / 2DS consoles on firmware 11.17.0 do not currently have any free, software-only methods. Therefore, all of the methods here have some sort of prerequisite.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
Create a folder named Nintendo DSiWare inside of the <ID1>
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Open het output_(naam) .zip bestand en navigeer naar China_Taiwan -> output_setup
Create a folder named Nintendo DSiWare inside of the <ID1>
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself.
+
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself. You can also have a chat with us in the #guide-meta channel at Nintendo Homebrew on Discord.
3DS firmware 11.17.0 was recently released. Dit is wat je moet weten:
+
The latest 3DS firmware is 11.17.0. Dit is wat je moet weten:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
I am on the latest system version. Is mijn console hackbaar zonder externe hardware/vereisten?
-
Het hangt af van je console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -598,7 +602,7 @@ window.cookieconsent.initialise({
I heard about this thing I have to pay for (Gateway, Sky3DS, ntrboot, R4, etc). Is that something I need?
-
At the moment, 3DS / 3DS XL / 2DS consoles on 11.17.0 need to use one of many alternate exploits to install custom firmware. If none of the other prerequisites are available, then ntrboot will be the cheapest available option (roughly $20 USD).
+
Nee. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
Neem alle inleidende pagina’s (inclusief deze pagina!) grondig door voordat je verdergaat.
-
3DS firmware 11.17.0 was recently released. Dit is wat je moet weten:
+
The latest 3DS firmware is 11.17.0. Dit is wat je moet weten:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
Vind je dit een goede handleiding? We accepteren donaties.
+
+
+
+
+
+
+
+
+Technical Details (optional)
+
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
Compatibility Notes
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
Wat je nodig hebt
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
+
+
+
+
+
Instructies
+
+
Deel I - Voorbereiding
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
Zet je console uit
+
Plaats je SD kaart in je computer
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Zet je console aan
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Zet je console uit
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Stop je SD-kaart terug in je console
+
Zet je console aan
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
Plaats je SD kaart in je computer
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
+
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
+
If the camera did NOT appear, you cannot follow this method. If this is the case, stay on your current firmware and ask Nintendo Homebrew on Discord for help.
+
If the camera did NOT appear, you cannot follow this method. If this is the case, use Installing boot9strap (MSET9) instead.
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
+
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
Your console will have booted into the Homebrew Launcher
Launch nimdsphax from the list of homebrew
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
diff --git a/nl_NL/installing-boot9strap-(soundhax).html b/nl_NL/installing-boot9strap-(soundhax).html
index 2d4c45ddb2..b4cd03baed 100644
--- a/nl_NL/installing-boot9strap-(soundhax).html
+++ b/nl_NL/installing-boot9strap-(soundhax).html
@@ -386,11 +386,15 @@ window.cookieconsent.initialise({
-
3DS firmware 11.17.0 was recently released. Dit is wat je moet weten:
+
The latest 3DS firmware is 11.17.0. Dit is wat je moet weten:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Zet je console aan
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Zet je console aan
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1175,8 +1358,8 @@ You can check if your SD is being read by holding SELECT on boot and checking th
If this is the case, attempt the steps below, which are listed from easiest to hardest:
Power off your console, remove the SD card, re-insert it, then power on your console
-
Power off your console, remove the SD card, insert it on your PC, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
-
Power off your console, remove the SD card, insert it on your PC and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
+
Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
+
Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
Test your SD card for errors by following the guide according to your computer’s operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
Vind je dit een goede handleiding? We accepteren donaties.
+
+
+
+
+
+
Verplicht te lezen
+
+
To use the MSET9 exploit, you must update your console to the latest system version.
+
+
Wat je nodig hebt
+
+
+
An internet connection on your console
+
+
+
Section I - Updating the System
+
+
+
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
+
+
De updater kan een bericht weergeven met de woorden “Your system is up to date” in plaats van te updaten. This is normal if you are already up to date; continue to the next section
+
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
Os consoles 3DS / 3DS XL / 2DS no firmware 11.17.0 não possuem atualmente nenhum método gratuito ou somente para software. Por conseguinte, todos os métodos têm aqui uma espécie de pré-requisito.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
Crie uma pasta chamada Nintendo DSiWare dentro do <ID1>
-
Se você já teve a pasta e já existe algum arquivo de backup de DSiWare existente (`. dentro) dentro, copie-os para seu PC e remova-os do seu cartão SD
+
Se você já teve a pasta e existem algum arquivo de backup de DSiWare existente (`<8-character-id>.bin) dentro desta pasta, copie-os para o seu computador e remova-os do seu cartão SD
Abra o arquivo output_(nome) .zip e navegue até China_Taiwan -> output_setup
Crie uma pasta chamada Nintendo DSiWare dentro do <ID1>
-
Se você já teve a pasta e já existe algum arquivo de backup de DSiWare existente (`. dentro) dentro, copie-os para seu PC e remova-os do seu cartão SD
+
Se você já teve a pasta e existem algum arquivo de backup de DSiWare existente (`<8-character-id>.bin) dentro desta pasta, copie-os para o seu computador e remova-os do seu cartão SD
Copie o arquivo F00D43D5.bin do BannerBomb3.zip para a pasta Nintendo DSiWare
If you see GodMode9, Decrypt9WIP, Hourglass9, or Luma3DS chainloader, you held (Start) by accident and should try these instructions again with (Select)
+
Se você ver GodMode9, Decrypt9WIP, Hourglass9 ou um chainloader do Luma3DS, você pressionou (Start) acidentalmente e deve tentar estas instruções novamente com (Select)
Este guia é de código aberto - seu repositório está disponível aqui. Se você notou algum problema neste guia, você pode arquivar um issue para nos alertar ou arquivar uma pull request para fazer as alterações necessárias você mesmo.
+
Este guia é de código aberto - seu repositório está disponível aqui. Se você notou algum problema neste guia, você pode arquivar um issue para nos alertar ou arquivar uma pull request para fazer as alterações necessárias você mesmo. Você também pode conversar conosco no canal #guide-meta em Nintendo Homebrew no Discord.
Firmware 11.17.0 para o 3DS foi lançado recentemente. Veja aqui o que você deve saber:
+
The latest 3DS firmware is 11.17.0. Veja aqui o que você deve saber:
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
-
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Especificamente, os consoles da linha New 3DS têm um método de software livre, enquanto os consoles da linha Old 3DS precisarão usar exploits alternativos que dependem de hardware ou software externo.
+
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua. The methods on earlier firmwares are easier and more stable.
+
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
Estou na versão mais recente do sistema. É possível que meu console seja invadido sem o uso de qualquer hardware externo ou pré-requisito?
-
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -598,7 +602,7 @@ window.cookieconsent.initialise({
Ouvi falar sobre essa coisa que tenho que pagar para obter (Gateway, Sky3DS, ntrboot, R4, etc). Isso é algo que eu preciso?
-
No momento, os consoles 3DS / 3DS XL / 2DS na 11.17.0 precisam usar um dos muitos exploits alternativos para instalar custom firmware. Se nenhum dos outros pré-requisitos estiver disponível, ntrboot será a opção mais barata disponível (cerca de 20 dólares).
+
Não. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
Os flashcarts com 3DS-mode como Gateway e Sky3DS não são recomendados porque eles estão obsoletos e podem carregar o risco de banimento ou brick.
Leia atentamente todas as páginas introdutórias (incluindo essa aqui!) antes de prosseguir.
-
Firmware 11.17.0 para o 3DS foi lançado recentemente. Veja aqui o que você deve saber:
+
The latest 3DS firmware is 11.17.0. Veja aqui o que você deve saber:
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
-
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Especificamente, os consoles da linha New 3DS têm um método de software livre, enquanto os consoles da linha Old 3DS precisarão usar exploits alternativos que dependem de hardware ou software externo.
+
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua. The methods on earlier firmwares are easier and more stable.
+
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
Notas de Compatibilidade
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
O que é necessário
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Verifique abrindo um terminal e digitando python3 -V. Se este retornar um número de versão, ele funcionará para este guia.
+
+
+
+
+
Instruções
+
+
Seção I - Preparação
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
Desligue seu console
+
Insira o cartão SD no seu computador
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Ligue o seu console
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Desligue seu console
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsira o cartão SD no seu console
+
Ligue o seu console
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
Insira o cartão SD no seu computador
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
+
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
+
Nesta seção, você instalará custom firmware no seu console.
+
+
+
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
+
+
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
+
+
+
Quando concluído, aperte (A) para reiniciar o seu console
+
Seu console deve ter inicializado o menu de configuração do Luma3DS
+
+
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
+
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
+
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
+
+
+
Aperte (Start) para salvar e reiniciar
+
+
+
Section IV - Uninstalling MSET9
+
+
In this section, you will remove MSET9 to prevent further issues. (This will not remove the custom firmware that you just installed.)
+
+
Do NOT skip this section! If you do, applications may crash unexpectedly and you may encounter errors on the next page!
+
+
+
Desligue seu console
+
Insira o cartão SD no seu computador
+
In the MSET9 window, type 4, then press Enter to remove MSET9
+
+
You should see “Removing… done”
+
+
+
Close the MSET9 window; you will not need it for any of the upcoming steps
+
+
+
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
+
+
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
+
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Se a câmera NÃO aparecer, você não pode seguir este método. Se esse for o caso, fique no seu firmware atual e peça para ajuda ao Nintendo Homebrew no Discord.
+
Se a câmera NÃO aparecer, você não pode seguir este método. If this is the case, use Installing boot9strap (MSET9) instead.
Make sure SmileBASIC is updated to the latest version
+
Certifique-se de que o SmileBASIC está atualizado para versão mais recente
Desligue seu console
Insira o cartão SD no seu computador
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
@@ -557,26 +561,25 @@ window.cookieconsent.initialise({
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
+
Copie new3ds_JPN.bin ou old3ds_JPN.bin (dependendo do seu modelo) de otherapps_with_CfgS_11.17.zip para a raiz do seu cartão SD e, em seguida, renomeie o payload para otherapp.bin
Não adicione a extensão .bin se você não a vê
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Copie o .icn petitcom para sua região para a raiz do seu cartão SD
+
Transfira SH2E-JPN.300.wav do .zip Release_sh2e para um dispositivo que pode reproduzir arquivos .wav, por exemplo um telefone
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
Copie a pasta nimdsphax do nimdsphax .zip para a pasta /3ds/ no seu cartão SD
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
+
Navegue até Nintendo 3DS -> <ID0>-> ` -> `title` -> `0004000e`
Firmware 11.17.0 para o 3DS foi lançado recentemente. Veja aqui o que você deve saber:
+
The latest 3DS firmware is 11.17.0. Veja aqui o que você deve saber:
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
-
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Especificamente, os consoles da linha New 3DS têm um método de software livre, enquanto os consoles da linha Old 3DS precisarão usar exploits alternativos que dependem de hardware ou software externo.
+
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua. The methods on earlier firmwares are easier and more stable.
+
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Ligue o seu console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Ligue o seu console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1175,8 +1358,8 @@ Você pode verificar se seu SD está sendo lido segurando SELECT durante a inici
Se este for o caso, tente os passos abaixo, os quais são listados de mais fácil para mais difícil:
Desligue o console, remova o cartão SD, insira-o e, em seguida, ligue seu console
-
Desligue o console, remova o cartão SD, o insira no seu PC, baixe a versão mais recente do Luma3DS, extraia boot.firm do Luma3DS.zip e coloque-o na raiz do seu cartão SD (substituindo qualquer arquivo existente)
-
Desligue o console, remova o cartão SD, insira-o no seu PC e reformate o cartão SD de acordo com o sistema operacional do seu computador: Windows, macOS, Linux(isso irá apagar os dados do seu cartão SD)
+
Desligue o console, remova o cartão SD, insira-o no seu computador, baixe a versão mais recente do Luma3DS, extraia boot.firm do Luma3DS.zip e coloque-o na raiz do seu cartão SD (substituindo qualquer arquivo existente)
+
Desligue o console, remova o cartão SD, insira-o no seu computador e reformate o cartão SD de acordo com o sistema operacional do seu computador: Windows, macOS, Linux(isso irá apagar os dados do seu cartão SD)
Teste por erros no seu cartão SD seguindo o guia de acordo com o sistema operacional do seu computador: Windows, Linux, macOS. Se o seu cartão SD estiver marcado como defeituoso, então você terá que substituir o cartão SD
To use the MSET9 exploit, you must update your console to the latest system version.
+
+
O que você precisa
+
+
+
Uma conexão com a internet no seu console
+
+
+
Seção I - Atualizando o Sistema
+
+
+
Atualize seu console indo em Configurações do Sistema, depois em “Outras Configurações”, depois indo até a direita e usando “Atualização do Sistema”
+
+
O atualizador pode exibir uma mensagem dizendo “Seu sistema está atualizado” ao invés de atualizar. Isso é normal se você já está atualizado; continue para a próxima seção
+
Se isso lhe der um erro, defina suas configurações de DNS e configurações de Proxy para “Automático”
3DS / 3DS XL / 2DS consoles on firmware 11.17.0 do not currently have any free, software-only methods. Therefore, all of the methods here have some sort of prerequisite.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself.
+
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself. You can also have a chat with us in the #guide-meta channel at Nintendo Homebrew on Discord.
如果你的主机还没有破解且你打算进行破解,请不要在操作之前更新系统至最新版本。 The methods on earlier firmwares are easier and more stable.
+
如果你的未破解主机已经升级到 11.17.0 了,本教程也已更新对应的方法。 Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -534,7 +538,7 @@ window.cookieconsent.initialise({
I am on the latest system version. 我的主机是否可以在不使用任何外设的情况下破解?
-
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
@@ -599,7 +603,7 @@ window.cookieconsent.initialise({
I heard about this thing I have to pay for (Gateway, Sky3DS, ntrboot, R4, etc). Is that something I need?
-
At the moment, 3DS / 3DS XL / 2DS consoles on 11.17.0 need to use one of many alternate exploits to install custom firmware. If none of the other prerequisites are available, then ntrboot will be the cheapest available option (roughly $20 USD).
+
No. While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
如果你的主机还没有破解且你打算进行破解,请不要在操作之前更新系统至最新版本。 The methods on earlier firmwares are easier and more stable.
+
如果你的未破解主机已经升级到 11.17.0 了,本教程也已更新对应的方法。 Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
兼容性注意
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
你需要准备点啥?
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
+
+
+
+
+
操作步骤
+
+
第一步 – 准备工作
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
将主机关机
+
将你的 SD 卡插入到电脑
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Power on your console
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Power off your console
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
将你的 SD 卡插入到电脑
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
If the camera did NOT appear, you cannot follow this method. If this is the case, stay on your current firmware and ask Nintendo Homebrew on Discord for help.
+
If the camera did NOT appear, you cannot follow this method. If this is the case, use Installing boot9strap (MSET9) instead.
如果你的主机还没有破解且你打算进行破解,请不要在操作之前更新系统至最新版本。 The methods on earlier firmwares are easier and more stable.
+
如果你的未破解主机已经升级到 11.17.0 了,本教程也已更新对应的方法。 Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1177,8 +1360,8 @@ You can check if your SD is being read by holding SELECT on boot and checking th
If this is the case, attempt the steps below, which are listed from easiest to hardest:
Power off your console, remove the SD card, re-insert it, then power on your console
-
Power off your console, remove the SD card, insert it on your PC, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
-
Power off your console, remove the SD card, insert it on your PC and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
+
Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
+
Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
Test your SD card for errors by following the guide according to your computer’s operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
3DS / 3DS XL / 2DS consoles on firmware 11.17.0 do not currently have any free, software-only methods. Therefore, all of the methods here have some sort of prerequisite.
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
Create a folder named Nintendo DSiWare inside of the <ID1>
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Open the output_(name) .zip file and navigate to China_Taiwan -> output_setup
Create a folder named Nintendo DSiWare inside of the <ID1>
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
+
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself.
+
This guide is open-source; our repository is available here. If you’ve noticed an issue on this guide, you can file an issue to make us aware, or file a pull request to make the necessary changes yourself. You can also have a chat with us in the #guide-meta channel at Nintendo Homebrew on Discord.
3DS firmware 11.17.0 was recently released. 以下是你該知道的:
+
The latest 3DS firmware is 11.17.0. 以下是你該知道的:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
@@ -533,7 +537,7 @@ window.cookieconsent.initialise({
我目前裝的系統為最新版本。 Is my console hackable without any external hardware/prerequisites?
-
It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires additional software or hardware.
+
Yes! New 3DS / New 3DS XL / New 2DS XL can use super-skaterhax, while 3DS / 3DS XL / 2DS can use MSET9.
At the moment, 3DS / 3DS XL / 2DS consoles on 11.17.0 need to use one of many alternate exploits to install custom firmware. If none of the other prerequisites are available, then ntrboot will be the cheapest available option (roughly $20 USD).
+
不會的。 While a DS flashcart can be used to mod a 3DS using ntrboot, there is now a free software method available for most consoles.
3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
3DS firmware 11.17.0 was recently released. 以下是你該知道的:
+
The latest 3DS firmware is 11.17.0. 以下是你該知道的:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
MSET9 is an exploit for the System Settings application developed by zoogie. It exploits a flaw where the ID1 (the second 32-character folder name inside of the Nintendo 3DS folder, inside of the ID0) can be any name as long as it is 32 characters. Performing a specific sequence of actions results in the console executing the instructions that are encoded into the ID1 folder name, which can be used to grant full control over the 3DS.
+
+
+
+
相容性資訊
+
+
This method requires a computer running Windows or Linux. macOS is NOT supported, nor are phones or tablets. If you do not have access to Windows or Linux, you will need to use an alternate exploit.
+
+
必備項目
+
+
+
The latest prerelease of MSET9 (the Release .zip file)
+
Any 3.x version of Pythoninstalled on your computer
+
+
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
+
+
+
+
+
操作說明
+
+
第一節 — 準備工作
+
+
In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.
+
+
+
Power on your console with your SD card inserted
+
Open Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
You may see this screen, which indicates the necessary data has been created
+
If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step
+
+
+
Power off your console
+
將 SD 卡插入至電腦中
+
+
Copy everything from the Release .zip to the root of your SD card, overwriting any existing files
+
+
+
+
Execute the mset9.py script on the root of your SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
You should keep this window open until the end of this page, but if you close it by accident, you can open it again by redoing this step
+
+
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
The window should change to this:
+
+
+
+
+
+
Ensure that the correct console model and version is displayed
+
+
+
Type 1, then press Enter to setup MSET9
+
+
If you see “(title.db/import.db) does not exist on SD card!”:
+
+
Type “yes”, then press Enter
+
Close the MSET9 window
+
Safely eject your SD from your computer
+
Insert your SD card into your console
+
Power on your console
+
Navigate to System Settings -> Data Management -> Nintendo 3DS -> Software -> Reset (visual instructions)
+
Power off your console
+
Insert your SD card into your computer
+
Go back to Step 7 (“Execute the mset9.py script”)
+
+
+
+
+
Once the window says “Setting up… done”, safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console
+
Power on your console
+
+
+
Section II - MSET9
+
+
In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
+
+
These instructions must be followed EXACTLY, so double-check EVERYTHING you are doing to avoid errors!
+
+
+
Hover over the System Settings icon using the D-Pad (do not select it yet)
+
Power off, then power on your console
+
Press (A) to launch System Settings
+
Navigate to Data Management -> Nintendo 3DS -> Extra Data (image)
+
Do not press any buttons or touch the screen - ensure that you see the Mii Maker icon
+
With the console STILL ON, and without pressing any buttons or touching the screen, remove your SD card from your console
+
+
The menu will refresh and say that no SD card is inserted, which is expected
+
+
+
將 SD 卡插入至電腦中
+
In the MSET9 window, type 2, then press Enter to trigger MSET9
+
+
You should see “Injecting… done.”
+
+
+
Safely eject your SD card from your computer
+
+
Keep the MSET9 window open
+
+
+
Reinsert your SD card into your console without pressing any buttons or touching the screen
If the camera did NOT appear, you cannot follow this method. If this is the case, stay on your current firmware and ask Nintendo Homebrew on Discord for help.
+
If the camera did NOT appear, you cannot follow this method. If this is the case, use Installing boot9strap (MSET9) instead.
3DS firmware 11.17.0 was recently released. 以下是你該知道的:
+
The latest 3DS firmware is 11.17.0. 以下是你該知道的:
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a free software method, while Old3DS-family consoles will need to use alternate exploits that rely on external hardware or software.
+
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
+
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
The SD card may be write-locked. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.
This can happen when Option 1 stopped because of an error and there is an incomplete installation.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+ +If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
+
+
+
+
+Red screen after reinserting SD card (Section II Step 11)
+
+
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the SDMC folder in the MSET9 .zip, replacing any existing files.
+
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
Your SD card does not have Mii Maker Data, which is necessary for this exploit to run.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
+
+
+
+
+
+System Settings loading infinitely after reinserting the SD card
+
+
You most likely did something different from the MSET9 instructions, or selected the wrong model or version.
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 3, then press Enter
+
Once the window says “Deleting… done.”, insert the SD card into your console
If you continue to have this issue and are sure that you did everything correctly, it’s possible that there’s something wrong with your Mii Maker extdata. Follow these instructions to reset it:
+
+
+
Close the script window
+
Execute the mset9.py script on the root of the SD card
+
+
Windows: Double-click mset9.bat
+
+
If this doesn’t work: hold SHIFT and right-click anywhere in the SD card window, then click the option that opens Terminal, PowerShell, or Command Prompt, then type py -3 mset9.py and press Enter
+
+
+
Linux: open a Terminal window, cd to the root of your SD card, then type python3 mset9.py and press Enter
+
You should see a window that says “MSET9 … SETUP by zoogie”
+
+
+
Type the number corresponding to your console model and version, then press Enter
+
Type 4, then press Enter to remove MSET9
+
Insert the SD card into your console
+
Power on your console
+
Launch Mii Maker
+
Wait for your console to reach the “Welcome to Mii Maker” screen, then exit Mii Maker
@@ -1175,8 +1358,8 @@ You can check if your SD is being read by holding SELECT on boot and checking th
If this is the case, attempt the steps below, which are listed from easiest to hardest:
Power off your console, remove the SD card, re-insert it, then power on your console
-
Power off your console, remove the SD card, insert it on your PC, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
-
Power off your console, remove the SD card, insert it on your PC and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
+
Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
+
Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer’s operating system: Windows, macOS, Linux(this will wipe your SD card data)
Test your SD card for errors by following the guide according to your computer’s operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card