merge l10n

_pages/af_ZA/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/af_ZA/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ During this process, we also setup programs such as the following:
 1. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files
 1. Create a folder named `luma` on the root of your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
 
 ##### Section II - Installing arm9loaderhax
@@ -106,7 +106,8 @@ During this process, we also setup programs such as the following:
 If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If this gives you an error, set your DNS settings to "auto"
@@ -131,7 +131,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section V - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 You can update your arm9loaderhax installation in the future by following the instructions on the [Updating A9LH](updating-a9lh) page.
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/af_ZA/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. Insert your SD card into your computer
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/af_ZA/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/af_ZA/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Cannot inject H&S on Gateway downgraded device
 This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Navigate to the folder for your device and region:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/af_ZA/Updating-A9LH.txt

@@ -47,7 +47,7 @@ These steps will also update your various payloads and the AES key database.
 1. Delete any existing `aeskeydb.bin` from the root of your SD card
 1. Delete the `a9lh` folder from the root of your SD card if it exists
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card
 1. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ These steps will also update your various payloads and the AES key database.
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/ar_SA/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/ar_SA/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ During this process, we also setup programs such as the following:
 1. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files
 1. Create a folder named `luma` on the root of your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
 
 ##### Section II - Installing arm9loaderhax
@@ -106,7 +106,8 @@ During this process, we also setup programs such as the following:
 If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If this gives you an error, set your DNS settings to "auto"
@@ -131,7 +131,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section V - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 You can update your arm9loaderhax installation in the future by following the instructions on the [Updating A9LH](updating-a9lh) page.
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/ar_SA/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. Insert your SD card into your computer
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/ar_SA/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/ar_SA/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Cannot inject H&S on Gateway downgraded device
 This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Navigate to the folder for your device and region:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/ar_SA/Updating-A9LH.txt

@@ -47,7 +47,7 @@ These steps will also update your various payloads and the AES key database.
 1. Delete any existing `aeskeydb.bin` from the root of your SD card
 1. Delete the `a9lh` folder from the root of your SD card if it exists
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card
 1. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ These steps will also update your various payloads and the AES key database.
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/ca_ES/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/ca_ES/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ During this process, we also setup programs such as the following:
 1. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files
 1. Create a folder named `luma` on the root of your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
 
 ##### Section II - Installing arm9loaderhax
@@ -106,7 +106,8 @@ During this process, we also setup programs such as the following:
 If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
@@ -131,7 +131,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section V - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 You can update your arm9loaderhax installation in the future by following the instructions on the [Updating A9LH](updating-a9lh) page.
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/ca_ES/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. Insert your SD card into your computer
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/ca_ES/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/ca_ES/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Cannot inject H&S on Gateway downgraded device
 This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Navigate to the folder for your device and region:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/ca_ES/Updating-A9LH.txt

@@ -47,7 +47,7 @@ These steps will also update your various payloads and the AES key database.
 1. Delete any existing `aeskeydb.bin` from the root of your SD card
 1. Delete the `a9lh` folder from the root of your SD card if it exists
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card
 1. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ These steps will also update your various payloads and the AES key database.
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/cs_CZ/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/cs_CZ/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ During this process, we also setup programs such as the following:
 1. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files
 1. Create a folder named `luma` on the root of your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
 
 ##### Section II - Installing arm9loaderhax
@@ -106,7 +106,8 @@ During this process, we also setup programs such as the following:
 If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If this gives you an error, set your DNS settings to "auto"
@@ -131,7 +131,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section V - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 You can update your arm9loaderhax installation in the future by following the instructions on the [Updating A9LH](updating-a9lh) page.
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/cs_CZ/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. Insert your SD card into your computer
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/cs_CZ/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/cs_CZ/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Cannot inject H&S on Gateway downgraded device
 This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Navigate to the folder for your device and region:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/cs_CZ/Updating-A9LH.txt

@@ -47,7 +47,7 @@ These steps will also update your various payloads and the AES key database.
 1. Delete any existing `aeskeydb.bin` from the root of your SD card
 1. Delete the `a9lh` folder from the root of your SD card if it exists
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card
 1. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ These steps will also update your various payloads and the AES key database.
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/da_DK/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/da_DK/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ During this process, we also setup programs such as the following:
 1. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files
 1. Create a folder named `luma` on the root of your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
 
 ##### Section II - Installing arm9loaderhax
@@ -106,7 +106,8 @@ During this process, we also setup programs such as the following:
 If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If this gives you an error, set your DNS settings to "auto"
@@ -131,7 +131,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section V - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 You can update your arm9loaderhax installation in the future by following the instructions on the [Updating A9LH](updating-a9lh) page.
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/da_DK/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. Insert your SD card into your computer
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/da_DK/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/da_DK/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Cannot inject H&S on Gateway downgraded device
 This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Navigate to the folder for your device and region:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/da_DK/Updating-A9LH.txt

@@ -47,7 +47,7 @@ These steps will also update your various payloads and the AES key database.
 1. Delete any existing `aeskeydb.bin` from the root of your SD card
 1. Delete the `a9lh` folder from the root of your SD card if it exists
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card
 1. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ These steps will also update your various payloads and the AES key database.
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/de_DE/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Weil der 9.2.0 CTRTransfer dazu da ist, die Probleme vom aktuellem NAND zu beheb
 1. Schalte deinen 3DS aus
 1. Stecke deine SD-Karte in deinen Computer
 1. Erstelle einen Ordner mit dem Namen `cias` im Stammverzeichnis deiner SD-Karte, soweit er nicht schon existiert
-1. Kopiere die Datei `GodMode9.bin` aus der GodMode9 `.zip` in den `/luma/payloads/` Ordner deiner SD-Karte und ändere den Namen `GodMode9.bin` aus dem Ordner `/luma/payloads` in `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Kopiere das 9.2.0 CTRTransfer Abbild `.bin` von der CTRTransfer `.zip` in den `/files9/` Ordner deiner SD-Karte
 1. Kopiere `FBI.cia` aus der FBI-`.zip` in den `/cias/`-Ordner auf deiner SD-Karte
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 
 ##### Abschnitt II - CTRTransfer
 
-1. Starte GodMode9 aus arm9loaderhax, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hälst
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigiere zu `SDCARD` -> `files9`
 1. Drücke (A) auf der CTRTrasnfer `.bin`, um diese auszuwählen
 1. Wähle "CTRNAND Options..." aus
@@ -62,13 +63,13 @@ Weil der 9.2.0 CTRTransfer dazu da ist, die Probleme vom aktuellem NAND zu beheb
   + Drücke (A) um fortzufahren, sobald der Vorgang abgeschlossen ist
 1. Drücke (Start) um deinen 3DS neu zu starten
 1. Aktualisiere deinen 3DS, indem zu zu den Systemeinstellungen gehst, dann "Allgemeine Einstellungen" auswählst und dann "System-Update" startest
-  + **Beachte, dass die Version 11.4.0 sehr neu ist, einige Luma3DS Bugs existieren (DS und GBA Spiele starten nicht). Unter anderem ist NTR CFW noch nicht mit 11.4.0 kompatibel. Du solltest mit dem Update noch warten bis eine neue Luma3DS Version erscheint, welche diese Fehler behebt.**
   + Updates mit A9LH + Luma (welches du hast) sind sicher
   + Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
 
 ##### Abschnitt III - Injektion von FBI
 
-1. Starte den 3DS neu, während du (Start) hältst, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigiere zu `SDCARD` -> `cias`
 1. Drücke (A) auf der `FBI.cia`-Datei, um diese auszuwählen. Wähle dann "CIA Image options..." und dann "Mount Image to drive"
 1. Drücke (A) auf der `.app`-Datei, dann wähle "NCCH Image options" und danach wählst du "Inject to H&S"
@@ -99,7 +100,8 @@ Wenn du keinen `eshop` oder `unknown` Ordner früher hattest, kannst du das übe
 
 ##### Abschnitt VII - Die Gesundheits und Sicherheitsinformationen-Anwendung wiederherstellen
 
-1. Starte den 3DS neu, während du (Start) hältst, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Drücke  (HOME) um das Aktionsmenü aufzurufen
 1. Wähle "More..."
 1. Wähle "Restore H&S"

_pages/de_DE/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas
 1. Kopiere `arm9loaderhax.bin` aus der Luma3DS `.7z` in das Stammverzeichnis deiner SD-Karte, überschreibe dabei bereits existierenden Dateien
 1. Erstelle einen Ordner mit dem Namen `luma` im Stammverzeichnis deiner SD-Karte
 1. Erstelle einen Ordner mit dem Namen `payloads` in dem `luma`-Ordner auf deiner SD-Karte
-1. Kopiere die Datei `GodMode9.bin` aus der GodMode9 `.zip` in den `/luma/payloads/` Ordner deiner SD-Karte und ändere den Namen `GodMode9.bin` aus dem Ordner `/luma/payloads` in `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Kopiere `aeskeydb.bin` in den `/files9/`-Ordner auf deiner SD-Karte
 
 ##### Abschnitt II - arm9loaderhax installieren
@@ -106,7 +106,8 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas
 Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hattest und die Inhalte deines EmuNAND gerne auf deine neue SysNAND-CFW übertragen möchtest, solltest du jetzt [Verschiebe EmuNAND](move-emunand) befolgen, anstatt die ersten vier Schritte dieses Abschnittes durchzuführen.
 {: .notice--info}
 
-1. Starte deine Konsole während du (Start) gedrückt hälst, um in GodMode9 zu gelangen
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigiere zu `SDCARD` -> `ctrtransfer`
 1. Drücke (A) auf `<seriennummer>_nand.bin`, um dies auszuwählen, danach "NAND image options..." auswählen und zuletzt "Restore SysNAND (safe)" auswählen
 1. Drücke (A), um SysNAND-Änderungen zu aktivieren. Gib danach die angezeigte Tastenkombination ein
@@ -123,7 +124,6 @@ Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hatt
   + Kopiere `firmware.bin` und `cetk` in den `/luma/`-Ordner auf deiner SD-Karte
   + Lösche beide dieser Dateien nach dem das Update installiert wurde
 1. Aktualisiere deinen 3DS, indem zu zu den Systemeinstellungen gehst, dann "Allgemeine Einstellungen" auswählst und dann "System-Update" startest
-  + **Beachte, dass die Version 11.4.0 sehr neu ist, einige Luma3DS Bugs existieren (DS und GBA Spiele starten nicht). Unter anderem ist NTR CFW noch nicht mit 11.4.0 kompatibel. Du solltest mit dem Update noch warten bis eine neue Luma3DS Version erscheint, welche diese Fehler behebt.**
   + Updates mit A9LH + Luma (welches du hast) sind sicher
   + Die Warnung, dass ein New 3DS niemals von 2.1.0 aktualisiert werden darf, gilt nicht mehr nach der Wiederherstellung deines NAND-Backups.
   + Falls ein Fehler auftreten sollte, setze deine DNS-Einstellungen auf "automatisch beziehen"
@@ -131,7 +131,8 @@ Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hatt
 
 ##### Abschnitt V - Injektion von FBI
 
-1. Starte den 3DS neu, während du (Start) hältst, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigiere zu `SDCARD` -> `cias`
 1. Drücke (A) auf der `FBI.cia`-Datei, um diese auszuwählen. Wähle dann "CIA Image options..." und dann "Mount Image to drive"
 1. Drücke (A) auf der `.app`-Datei, dann wähle "NCCH Image options" und danach wählst du "Inject to H&S"
@@ -150,7 +151,8 @@ Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hatt
 
 ##### Abschnitt VII - Die Gesundheits- und Sicherheitsinformationen-Applikation wiederherstellen
 
-1. Starte den 3DS neu, während du (Start) hältst, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Drücke  (HOME) um das Aktionsmenü aufzurufen
 1. Wähle "More..."
 1. Wähle "Restore H&S"
@@ -198,10 +200,10 @@ Du kannst nun (Start) beim Starten deiner Konsole gedrückt halten, um GodMode9
 Du kannst deine A9LH-Installation auf dem neuesten Stand halten, indem du die Anweisungen der [A9LH updaten](updating-a9lh)-Seite befolgst.
 {: .notice--info}
 
-Behalte deine `<serialnumber>_nand.bin`-Datei. Sie kann in Zukunft mit GodMode9 wieder eingespielt werden, um dich vor einem Brick zu retten.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-Du kannst deine NAND-Sicherheitskopien aus dem `/files9/`-Ordner entfernen, solange du Kopien an einem sicheren Ort aufbewahrst.
+Behalte deine `<serialnumber>_nand.bin`-Datei. Sie kann in Zukunft mit GodMode9 wieder eingespielt werden, um dich vor einem Brick zu retten.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/de_DE/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ Dies ist ein Zusatzabschnitt zum Verschieben des Inhaltes eines vorherigen EmuNA
 
 1. Schalte deine Konsole aus
 1. Stecke deine SD-Karte in deinen Computer
-1. Kopiere die Datei `GodMode9.bin` aus der GodMode9 `.zip` in den `/luma/payloads/` Ordner deiner SD-Karte und ändere den Namen `GodMode9.bin` aus dem Ordner `/luma/payloads` in `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 
 ### Abschnitt II - Sicherung der SysNAND DSiWare Spielstände
@@ -60,7 +60,8 @@ Diese Schritte sind nicht notwendig für andere Virtual Console Spiele (GBC, NES
   + Navigiere zum Ordner, den du für das GBA VC Spiel erstellt hast
   + Drücke (Y), um `gbavc.sav` einzufügen
   + Drücke (Start) um deinen 3DS neu zu starten
-1. Starte den 3DS neu, während du (Start) hältst, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Abschnitt IV - Kopiere EmuNAND zu SysNAND
 
@@ -108,7 +109,8 @@ Wenn du keine GBA VC Spielstände früher gesichert hast, überspringe den Absch
   + Drücke (Y), um `gbavc.sav` einzufügen
   + Drücke (A) um fortzufahren
   + Drücke (Start) um deinen 3DS neu zu starten
-1. Starte den 3DS neu, während du (Start) hältst, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 #### Abschnitt 7 - Erstellung eines Backup für SysNAND
 

_pages/de_DE/Region-Changing.txt

@@ -51,7 +51,7 @@ Regionswechsel, welche die CTRTransfer-Methode (welche in dieser Anleitung genut
 1. Schalte deine Konsole aus
 1. Stecke deine SD-Karte in deinen Computer
 1. Erstelle einen Ordner mit dem Namen `cias` im Stammverzeichnis deiner SD-Karte, soweit er nicht schon existiert
-1. Kopiere die Datei `GodMode9.bin` aus der GodMode9 `.zip` in den `/luma/payloads/` Ordner deiner SD-Karte und ändere den Namen `GodMode9.bin` aus dem Ordner `/luma/payloads` in `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Kopiere das 9.2.0 CTRTransfer Abbild `.bin` von der CTRTransfer `.zip` in den `/files9/` Ordner deiner SD-Karte
 1. Kopiere `FBI.cia` aus der FBI-`.zip` in den `/cias/`-Ordner auf deiner SD-Karte
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
@@ -79,13 +79,13 @@ Regionswechsel, welche die CTRTransfer-Methode (welche in dieser Anleitung genut
   + Drücke (A) um fortzufahren, sobald der Vorgang abgeschlossen ist
 1. Drücke (Start) um deinen 3DS neu zu starten
 1. Aktualisiere deinen 3DS, indem zu zu den Systemeinstellungen gehst, dann "Allgemeine Einstellungen" auswählst und dann "System-Update" startest
-  + **Beachte, dass die Version 11.4.0 sehr neu ist, einige Luma3DS Bugs existieren (DS und GBA Spiele starten nicht). Unter anderem ist NTR CFW noch nicht mit 11.4.0 kompatibel. Du solltest mit dem Update noch warten bis eine neue Luma3DS Version erscheint, welche diese Fehler behebt.**
   + Updates mit A9LH + Luma (welches du hast) sind sicher
   + Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
 
 ##### Abschnitt III - Injektion von FBI
 
-1. Starte den 3DS neu, während du (Start) hältst, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigiere zu `SDCARD` -> `cias`
 1. Drücke (A) auf der `FBI.cia`-Datei, um diese auszuwählen. Wähle dann "CIA Image options..." und dann "Mount Image to drive"
 1. Drücke (A) auf der `.app`-Datei, dann wähle "NCCH Image options" und danach wählst du "Inject to H&S"
@@ -124,7 +124,8 @@ Wenn du keinen `eshop` oder `unknown` Ordner früher hattest, kannst du das übe
 
 ##### Abschnitt VI - Die Gesundheits- und Sicherheitsinformationen-Applikation wiederherstellen
 
-1. Starte den 3DS neu, während du (Start) hältst, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Drücke  (HOME) um das Aktionsmenü aufzurufen
 1. Wähle "More..."
 1. Wähle "Restore H&S"

_pages/de_DE/Troubleshooting.txt

@@ -66,7 +66,8 @@ Um die [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) Links in dieser
 ## <a name="gw_fbi" />Kann G&S nicht mit einem Gateway gedowngradeten Gerät einfügen
 Dies wird dadurch verursacht, da Gatewayeinfügung eine sehr schäbige Downgrademethode ist, welche zwei verschiedene Versionen jeder App auf dem System zurücklässt. Die eine wird nicht verwendet. Dennoch wird das G&S Einfügungs-System verwirrt, wodurch es in die falsche App einfügt.
 
-1. Starte GodMode9 aus arm9loaderhax indem du (Start) währenddessen die Konsole startet gedrückt hälst     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Gehe zu `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Gehe zum Ordner deiner Konsole und Region:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/de_DE/Updating-A9LH.txt

@@ -47,7 +47,7 @@ Die folgenden Schritte werden zudem einige payloads und die AES Key Database akt
 1. Lösche `aeskeydb.bin` aus dem Stammverzeichnis deiner SD-Karte
 1. Lösche den `a9lh` Ordner aus dem Stammverzeichnis deiner SD-Karte, falls vorhanden
 1. Kopiere die neue `aeskeydb.bin` in den `/files9/` Ordner auf deiner SD-Karte
-1. Kopiere die `GodMode9.bin` aus der GodMode9 `.zip` in den `/luma/payloads/` Ordner auf deiner SD-Karte. Ändere den Namen der `GodMode9.bin` im `/luma/payloads/` Verzeichnis auf `up_GodMode9.bin` um
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + Sollte in diesem Verzeichnis bereits die Datei `start_Hourglass9.bin` existieren, löschst du diese
 1. Kopiere `arm9loaderhax.bin` aus der SafeA9LHInstaller`.zip` in den `/luma/payloads/` Ordner auf deiner SD-Karte
 1. Benenne `arm9loaderhax.bin` aus `/luma/payloads/` um in `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ Die folgenden Schritte werden zudem einige payloads und die AES Key Database akt
 
 ##### Abschnitt IV - Installation von Luma3DS auf das CTRNAND
 
-1. Starte die Konsole neu während dem du (Start) gedrückt haltest, um GodMode9 zu starten
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigiere zu `SDCARD`
 1. Drücke (Y) auf `arm9loaderhax.bin`, um diese Datei zu kopieren
 1. Drücke (B), um zum Hauptmenü zurückzukehren

_pages/el_GR/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Εισάγετε την κάρτα SD στον υπολογιστή σας
 1. Δημιουργήστε έναν φάκελο με το όνομα `cias` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ήδη
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Αντιγράψτε το αρχείο `FBI.cia` από το FBI `.zip` στον φάκελο `/cias/` της κάρτας SD
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/el_GR/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 1. Αντιγράψτε το `arm9loaderhax.bin` από το Luma3DS `.7z` στη ρίζα της κάρτας SD, αντικαθιστώντας υπάρχοντα αρχεία
 1. Δημιουργήστε έναν φάκελο με το όνομα `luma` στην ρίζα της κάρτας SD
 1. Δημιουργήστε έναν φάκελο με το όνομα `payloads` στον φάκελο `luma` της κάρτας SD
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Αντιγράψτε το αρχείο `aeskeydb.bin` στον φάκελο `/files9/` της κάρτας SD
 
 ##### Ενότητα II - Εγκατάσταση του arm9loaderhax
@@ -106,7 +106,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 Εάν, πριν την πραγματοποίηση αυτό του οδηγού, είχατε ήδη μια διάταξη EmuNAND και θα θέλατε να μεταφέρετε τα περιεχόμενα της EmuNAND στο καινούργιο CFW της SysNAND, [ακολουθήστε το Μετακίνηση της EmuNAND](move-emunand) αντί για τα πρώτα βήματα αυτής της ενότητας.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
   + Αντιγράψτε τα αρχεία `firmware.bin` και `cetk` στον φάκελο `/luma/` της κάρτας SD
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + Η προειδοποίηση σχετικά με το να μην ενημερώσετε ποτέ ένα New 3DS από την έκδοση 2.1.0 δεν ισχύει έπειτα από την επαναφορά των αντιγράφων ασφαλείας της NAND.
   + Εάν αντιμετωπίζετε οποιοδήποτε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
@@ -131,7 +131,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 ##### Ενότητα V - Εισαγωγή του FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 Μπορείτε να ενημερώσετε το arm9loaderhax ακολουθώντας τις οδηγίες της σελίδας [Ενημέρωση του A9LH](updating-a9lh).
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-Μπορείτε να διαγράψετε τα αντίγραφα ασφαλείας της NAND από τον φάκελο `/files9/` εφόσον έχετε ακόμα τα αντίγραφα ασφαλείας της σε μια ασφαλή τοποθεσία.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/el_GR/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. Εισάγετε την κάρτα SD στον υπολογιστή σας
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/el_GR/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. Εισάγετε την κάρτα SD στον υπολογιστή σας
 1. Δημιουργήστε έναν φάκελο με το όνομα `cias` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ήδη
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Αντιγράψτε το αρχείο `FBI.cia` από το FBI `.zip` στον φάκελο `/cias/` της κάρτας SD
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/el_GR/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Αδυναμία εισαγωγής του H&S σε συσκευή που υποβαθμίστηκε με την χρήση Gateway
 Το πρόβλημα προκλήθηκε λόγο του ότι η Gateway χρησιμοποιεί μία πολύ κακοφτιαγμένη μέθοδο υποβάθμισης, η οποία αφήνει δύο εκδόσεις για κάθε μια από τις εφαρμογές του συστήματος. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Περιηγηθείτε στο `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Μεταβείτε στον φάκελο για την περιοχή και συσκευή σας:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/el_GR/Updating-A9LH.txt

@@ -47,7 +47,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 1. Διαγράψτε, εάν υπάρχει, οποιοδήποτε aeskeydb.bin από τη ρίζα της κάρτας SD
 1. Εάν υπάρχει, διαγράψτε τον φάκελο `a9lh` από τη ρίζα της κάρτας SD
 1. Αντιγράψτε το αρχείο `aeskeydb.bin` στο φάκελο `/files9/` της κάρτας SD
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. Αντιγράψτε το `arm9loaderhax.bin` από το SafeA9LHInstaller `.zip` στο φάκελο `/luma/payloads/` της κάρτας SD
 1. Μετονομάστε το `arm9loaderhax.bin` που βρίσκεται στο `/luma/payloads/` σε `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 ##### Ενότητα IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/en_PT/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert ye SD card into ye computer
 1. Create a folder named `cias` on th' root 'o ye SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from th' FBI `.zip` to th' `/cias/` folder on ye SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/en_PT/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ Durin' 'tis process, we also setup programs such as th' followin':
 1. Copy `arm9loaderhax.bin` from th' Luma3DS `.7z` to th' root 'o ye SD card, overwrite existin' files
 1. Create a folder named `luma` on th' root 'o ye SD card
 1. Create a folder named `payloads` in th' `luma` folder on ye SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy `aeskeydb.bin` to th' `/files9/` folder on ye SD card
 
 ##### Section II - Installin' arm9loaderhax
@@ -106,7 +106,8 @@ Durin' 'tis process, we also setup programs such as th' followin':
 If, before followin' 'tis guide, ye already had an EmuNAND setup 'n would like to move th' contents 'o ye previous EmuNAND to ye new SysNAND CFW, now be th' time to [follow Move EmuNAND](move-emunand) instead 'o doin' th' first four steps in 'tis section.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ If, before followin' 'tis guide, ye already had an EmuNAND setup 'n would like t
   + Copy `firmware.bin` 'n `cetk` to th' `/luma/` folder on ye SD card
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If 'tis gives ye an error, set ye DNS settin's to "auto"
@@ -131,7 +131,8 @@ If, before followin' 'tis guide, ye already had an EmuNAND setup 'n would like t
 
 ##### Section V - Injectin' FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ If, before followin' 'tis guide, ye already had an EmuNAND setup 'n would like t
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 Ye can update ye arm9loaderhax installation in th' future by followin' th' instructions on th' [Updatin' A9LH](updating-a9lh) page.
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/en_PT/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. Insert ye SD card into ye computer
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/en_PT/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. Insert ye SD card into ye computer
 1. Create a folder named `cias` on th' root 'o ye SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from th' FBI `.zip` to th' `/cias/` folder on ye SD card
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/en_PT/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Cannot inject H&S on Gateway downgraded device
 This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Navigate to the folder for your device and region:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/en_PT/Updating-A9LH.txt

@@ -47,7 +47,7 @@ These steps will also update your various payloads and the AES key database.
 1. Delete any existing `aeskeydb.bin` from the root of your SD card
 1. Delete the `a9lh` folder from the root of your SD card if it exists
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card
 1. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ These steps will also update your various payloads and the AES key database.
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/es_ES/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Debido a que el objetivo del CTRTransfer 9.2.0 es solucionar problemas causados
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
 1. Crea una carpeta llamada `cias` en la raíz de tu tarjeta SD, si aún no existe
-1. Copia `GodMode9.bin` encontrado en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD y renombra `GodMode9.bin` en `/luma/payloads/` a `start_GodMode9.bin`
+1. Copia `GodMode9.bin` contenido en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD
 1. Copia la imagen `.bin` contenida en el archivo `.zip` de CTRTransfer 9.2.0 a la carpeta `/files9/` en tu tarjeta SD
 1. Copia el archivo `FBI.cia` contenido en el `.zip` de FBI a la carpeta`/cias/` en tu tarjeta SD
 1. Vuelve a insertar tu tarjeta SD en tu consola
 
 ##### Sección II - CTRTransfer
 
-1. Inicia GodMode9 desde arm9loaderhax manteniendo presionado (Start) mientras enciendes la consola
+1. Inicia el menú de selección de payloads de Luma3DS desde arm9loaderhax manteniendo (Start) al encender la consola
+1. Inicia GodMode9 presionando (A)
 1. Ve a `SDCARD` -> `files9`
 1. Presiona (A) sobre el `.bin` del CTRTransfer para seleccionarlo
 1. Selecciona "CTRNAND options..."
@@ -62,13 +63,13 @@ Debido a que el objetivo del CTRTransfer 9.2.0 es solucionar problemas causados
   + Presiona (A) para continuar cuando haya terminado
 1. Presiona (Start) para reiniciar tu consola
 1. Actualiza tu 3DS dirigiéndote a la Configuración de la consola, después a "Otras opciones", luego ve al último menú de la derecha y pulsa en "Actualización"
-  + **Ten en cuenta que, como la 11.4.0 es muy reciente, habrán algunos errores de Luma3DS en ella (los juegos de DS y GBA no iniciarán). Además, NTR CFW todavía no es compatible con 11.4.0. Puedes optar a cancelar la actualización por ahora hasta que salga una nueva versión de Luma3DS que corrija estos errores.* *
   + Actualizar la consola teniendo A9LH y Luma (lo que acabas de instalar) es seguro
   + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática"
 
 ##### Sección III - Inyectar FBI
 
-1. Reinicia tu consola manteniendo pulsado (Start) al encenderla para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 1. Ve a `SDCARD` -> `cias`
 1. Presiona (A) sobre `FBI.cia` para seleccionarlo, después selecciona "CIA image options...", y luego selecciona "Mount image to drive"
 1. Presiona (A) en el archivo `.app`, después selecciona "NCCH image options", y luego selecciona "Inject to H&S"
@@ -99,7 +100,8 @@ Si no tenías las carpetas `eshop` o `unknown`, salta esta sección.
 
 ##### Sección V - Restaurar Salud y Seguridad
 
-1. Reinicia tu consola manteniendo pulsado (Start) al encenderla para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 1. Presiona el botón (Home) para abrir el menú de acción
 1. Selecciona "Mas..."
 1. Selecciona "Restore H&S"

_pages/es_ES/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ Durante este proceso, también instalaremos programas como los siguientes:
 1. Copia el archivo `arm9loaderhax.bin` contenido en el archivo `.7z` de Luma3DS a la raíz de tu tarjeta SD, sobrescribe los archivos existentes
 1. Crea una carpeta llamada`luma` en la raíz de tu tarjeta SD
 1. Crea una carpeta llamada `payloads` en la carpeta `luma` de tu tarjeta SD
-1. Copia `GodMode9.bin` encontrado en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD y renombra `GodMode9.bin` en `/luma/payloads/` a `start_GodMode9.bin`
+1. Copia `GodMode9.bin` contenido en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD
 1. Copia `aeskeydb.bin` a la carpeta `/files9/` en tu tarjeta SD
 
 ##### Sección II - Instalar arm9loaderhax
@@ -106,7 +106,8 @@ Durante este proceso, también instalaremos programas como los siguientes:
 Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas mover el contenido de tu EmuNAND anterior a tu nuevo CFW SysNAND, ahora es el momento de [seguir Mover EmuNAND](move-emunand) en lugar de hacer los primeros cuatro pasos de esta sección.
 {: .notice--info}
 
-1. Enciende tu consola manteniendo pulsado (Start) para entrar en GodMode9
+1. Enciende tu consola manteniendo (Start) para ingresar al menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 1. Ve a `SDCARD` -> `ctrtransfer`
 1. Presiona (A) sobre `<numero-de-serie>nand.bin` para seleccionarlo, luego selecciona "NAND image options..." y luego "Restore SysNAND (safe)"
 1. Presiona (A) para desbloquear la sobreescritura de SysNAND, luego introduce la combinación de teclas mostrada
@@ -123,7 +124,6 @@ Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas
   + Copia `firmware.bin` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
   + Elimina ambos archivos después de actualizar tu consola
 1. Actualiza tu 3DS dirigiéndote a la Configuración de la consola, después a "Otras opciones", luego ve al último menú de la derecha y pulsa en "Actualización"
-  + **Ten en cuenta que, como la 11.4.0 es muy reciente, habrán algunos errores de Luma3DS en ella (los juegos de DS y GBA no iniciarán). Además, NTR CFW todavía no es compatible con 11.4.0. Puedes optar a cancelar la actualización por ahora hasta que salga una nueva versión de Luma3DS que corrija estos errores.* *
   + Actualizar la consola teniendo A9LH y Luma (lo que acabas de instalar) es seguro
   + La advertencia acerca de nunca actualizar una New 3DS en 2.1.0 no se aplica tras restaurar tu copia de seguridad de la NAND.
   + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática"
@@ -131,7 +131,8 @@ Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas
 
 ##### Sección V - Inyectar FBI
 
-1. Reinicia tu consola manteniendo pulsado (Start) al encenderla para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 1. Ve a `SDCARD` -> `cias`
 1. Presiona (A) sobre `FBI.cia` para seleccionarlo, después selecciona "CIA image options...", y luego selecciona "Mount image to drive"
 1. Presiona (A) en el archivo `.app`, después selecciona "NCCH image options", y luego selecciona "Inject to H&S"
@@ -150,7 +151,8 @@ Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas
 
 ##### Sección VII - Restaurar la aplicación de Salud y Seguridad
 
-1. Reinicia tu consola manteniendo pulsado (Start) al encenderla para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 1. Presiona el botón (Home) para abrir el menú de acción
 1. Selecciona "Mas..."
 1. Selecciona "Restore H&S"
@@ -198,10 +200,10 @@ Ahora puedes mantener presionado (Start) al encender para entrar en GodMode9.
 Puedes actualizar tu instalación de arm9loaderhax en el futuro siguiendo las instrucciones en la página [Actualizar A9LH](updating-a9lh).
 {: .notice--info}
 
-Conserva tu archivo `<numero-de-serie>_nand.bin`, GodMode9 puede restaurarlo para salvarte de un futuro brick.
+Para usar [NTR CFW](https://github.com/44670/BootNTR/), instala [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-Puedes eliminar tus copias de seguridad de la NAND de `/files9/` siempre y cuando las hayas guardado en un lugar seguro.
+Conserva tu archivo `<numero-de-serie>_nand.bin`, GodMode9 puede restaurarlo para salvarte de un futuro brick.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/es_ES/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ Esta es una sección adicional para mover los contenidos de una EmuNAND a la nue
 
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
-1. Copia `GodMode9.bin` encontrado en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD y renombra `GodMode9.bin` en `/luma/payloads/` a `start_GodMode9.bin`
+1. Copia `GodMode9.bin` contenido en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD
 1. Reinserta tu tarjeta SD en tu consola
 
 ##### Sección II - Copia de datos de juegos de DSiWare
@@ -60,7 +60,8 @@ Ten en cuenta que esto no es necesario para otro tipo de juegos de Consola Virtu
   + Navega hacia la carpeta que has creado para este juego de Consola Virtual de GBA
   + Presiona (Y) para pegar `gbavc.sav`
   + Presiona (Start) para reiniciar tu consola
-1. Reinicia tu consola manteniendo pulsado (Start) al encenderla para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 
 ##### Sección IV - Copiar EmuNAND a la SysNAND
 
@@ -108,7 +109,8 @@ Si no habías respaldado datos de partidas de Consola Virtual de GBA antes, pued
   + Presiona (Y) para pegar `gbavc.sav`
   + Presiona (A) para confirmar
   + Presiona (Start) para reiniciar tu consola
-1. Reinicia tu consola manteniendo pulsado (Start) al encenderla para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 
 ##### Sección VII - Copia de seguridad de la SysNAND
 

_pages/es_ES/Region-Changing.txt

@@ -51,7 +51,7 @@ Cambiar de región usando CTRTransfer (lo cual este método realiza) parece ser
 1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
 1. Crea una carpeta llamada `cias` en la raíz de tu tarjeta SD, si aún no existe
-1. Copia `GodMode9.bin` encontrado en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD y renombra `GodMode9.bin` en `/luma/payloads/` a `start_GodMode9.bin`
+1. Copia `GodMode9.bin` contenido en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD
 1. Copia la imagen `.bin` contenida en el archivo `.zip` de CTRTransfer 9.2.0 a la carpeta `/files9/` en tu tarjeta SD
 1. Copia el archivo `FBI.cia` contenido en el `.zip` de FBI a la carpeta`/cias/` en tu tarjeta SD
 1. Reinserta la tarjeta SD en tu consola
@@ -79,13 +79,13 @@ Cambiar de región usando CTRTransfer (lo cual este método realiza) parece ser
   + Presiona (A) para continuar cuando haya terminado
 1. Presiona (Start) para reiniciar tu consola
 1. Actualiza tu 3DS dirigiéndote a la Configuración de la consola, después a "Otras opciones", luego ve al último menú de la derecha y pulsa en "Actualización"
-  + **Ten en cuenta que, como la 11.4.0 es muy reciente, habrán algunos errores de Luma3DS en ella (los juegos de DS y GBA no iniciarán). Además, NTR CFW todavía no es compatible con 11.4.0. Puedes optar a cancelar la actualización por ahora hasta que salga una nueva versión de Luma3DS que corrija estos errores.* *
   + Actualizar la consola teniendo A9LH y Luma (lo que acabas de instalar) es seguro
   + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática"
 
 ##### Sección III - Inyectar FBI
 
-1. Reinicia tu consola manteniendo pulsado (Start) al encenderla para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 1. Ve a `SDCARD` -> `cias`
 1. Presiona (A) sobre `FBI.cia` para seleccionarlo, después selecciona "CIA image options...", y luego selecciona "Mount image to drive"
 1. Presiona (A) en el archivo `.app`, después selecciona "NCCH image options", y luego selecciona "Inject to H&S"
@@ -124,7 +124,8 @@ Si no tenías las carpetas `eshop` o `unknown`, salta esta sección.
 
 ##### Sección VI - Restaurar Salud y Seguridad
 
-1. Reinicia tu consola manteniendo pulsado (Start) al encenderla para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 1. Presiona el botón (Home) para abrir el menú de acción
 1. Selecciona "Mas..."
 1. Selecciona "Restore H&S"

_pages/es_ES/Troubleshooting.txt

@@ -66,7 +66,8 @@ Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta
 ## <a name="gw_fbi" />No se puede injectar H&S en una consola downgradeada con Gateway
 Esto ocurre porque la implementación del downgrade de Gateway es muy mala, haciendo que aparezcan dos versiones de cada aplicación en el sistema. Una de ellas no se usa, pero confunde al sistema de inyección de H&S causando una inyección errónea.
 
-1. Inicia GodMode9 desde arm9loaderhax manteniendo presionado (Start) mientras enciendes la consola     
+1. Enciende tu consola manteniendo (Start) para ingresar al menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)   
 1. Ve a `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Ve a la carpeta según tu dispositivo y región:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/es_ES/Updating-A9LH.txt

@@ -47,7 +47,7 @@ Estos pasos también actualizarán tus diversos payloads y la base de datos de c
 1. Elimina cualquier archivo `aeskeydb.bin` existente de la raíz de tu tarjeta SD
 1. Elimina la carpeta `a9lh` de la raíz de tu tarjeta SD si existe
 1. Copia `aeskeydb.bin` a la carpeta `/files9/` en tu tarjeta SD
-1. Copia `GodMode9.bin` encontrado en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD y renombra `GodMode9.bin` en `/luma/payloads/` a `start_GodMode9.bin`
+1. Copia `GodMode9.bin` contenido en el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD
   + Si `start_Hourglass9.bin` ya existe en esta carpeta, elimina `start_Hourglass9.bin`
 1. Copia `arm9loaderhax.bin` contenido en el `.zip` de SafeA9LHInstaller a la carpeta `/luma/payloads/` en la tarjeta SD
 1. Cambia el nombre de `arm9loaderhax.bin` en `/luma/payloads/` a `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ Estos pasos también actualizarán tus diversos payloads y la base de datos de c
 
 ##### Sección IV - CTRNAND Luma3DS
 
-1. Reinicia tu consola manteniendo pulsado (Start) para entrar a GodMode9
+1. Reinicia manteniendo (Start) al encender la consola para iniciar el menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
 1. Ve a `SDCARD`
 1. Presiona (Y) sobre `arm9loaderhax.bin` para copiarlo
 1. Presiona (B) para volver al menú principal

_pages/fi_FI/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Koska 9.2.0-CTRTransferin tarkoituksena on löytää olemassa olevan NANDin aihe
 1. Sammuta konsolisi
 1. Aseta SD-korttisi tietokoneeseesi
 1. Luo `cias`-niminen kansio SD-korttisi juureen, jos sitä ei jo ole olemassa
-1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon ja uudelleennimeä se siellä muotoon `start_GodMode9.bin`
+1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon
 1. Kopioi CTRTransfer-`.zip`-pakkauksesta 9.2.0-CTRTransfer-`.bin`-näköistiedosto SD-korttisi `/files9/`-kansioon
 1. Kopioi FBI-`.zip`-pakkauksesta `FBI.cia` SD-korttisi `/cias/`-kansioon
 1. Aseta SD-korttisi takaisin konsoliisi
 
 ##### Vaihe II – CTRTransfer
 
-1. Avaa GodMode9 arm9loaderhaxin kautta pitämällä (START)-painiketta pohjassa konsolin käynnistyessä
+1. Avaa Luma3DS:n ketjulatausvalikko arm9loaderhaxin kautta pitämällä (START)-painiketta pohjassa konsolin käynnistyessä
+1. Avaa GodMode9 painamalla (A):ta
 1. Mene hakemistoon `SDCARD` → `files9`
 1. Paina (A):ta CTRTransfer-`.bin`-tiedoston kohdalla valitaksesi sen
 1. Valitse "CTRNAND options..."
@@ -62,13 +63,13 @@ Koska 9.2.0-CTRTransferin tarkoituksena on löytää olemassa olevan NANDin aihe
   + Paina (A):ta jatkaaksesi, kun toiminto on suoritettu
 1. Paina (START)-painiketta käynnistääksesi uudelleen
 1. Päivitä konsolisi menemällä järjestelmäasetuksiin (System Settings), siellä muihin asetuksiin (Other Settings) ja sitten valitsemalla järjestelmäpäivitys (System Update) aivan oikeasta reunasta
-  + **Huomaathan, että koska 11.4.0 on vasta julkaistu, esiintyy Luma3DS:llä joitakin virheitä (DS- ja GBA-pelit eivät käynnisty). Lisäksi NTR-CFW ei ole vielä yhteensopiva 11.4.0:n kanssa. Voi olla järkevää päivittää vasta sitten, kun Luma3DS:stä julkaistaan uusi versio, joka korjaa nämä virheet.**
   + Pävitykset A9LH + Luma -kokoonpanolla (joka sinulla on) ovat turvallisia
   + Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
 
 ##### Vaihe III – FBI:n injektointi
 
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 1. Mene hakemistoon `SDCARD` → `cias`
 1. Paina (A):ta `FBI.cia`-tiedoston kohdalla valitaksesi sen, valitse "CIA image options..." ja sitten "Mount image to drive"
 1. Paina (A):ta `.app`-tiedoston kohdalla valitaksesi sen, valitse "NCCH image options" ja sitten "Inject to H&S"
@@ -99,7 +100,8 @@ Jos sinulla ei ollut `eshop`- tai `unknown`-kansiota vaiheessa II, ohita tämä
 
 ##### Vaihe V – Health and Safetyn palauttaminen
 
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon
 1. Valitse "More..."
 1. Valitse "Restore H&S"

_pages/fi_FI/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
 1. Kopioi Luma3DS-`.7z`-pakkauksesta `arm9loaderhax.bin` SD-korttisi juureen, korvaten aiemmat tiedostot
 1. Luo `luma`-niminen kansio SD-korttisi juureen
 1. Luo `payloads`-niminen kansio SD-korttisi `luma`-kansioon
-1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon ja uudelleennimeä se siellä muotoon `start_GodMode9.bin`
+1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon
 1. Kopioi `aeskeydb.bin` SD-korttisi `/files9/`-kansioon
 
 ##### Vaihe II – Arm9loaderhaxin asentaminen
@@ -106,7 +106,8 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
 Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluaisit siirtää sen sisällön uuteen SysNAND-CFW-kokoonpanoosi, seuraa osiota [EmuNANDin siirtäminen](move-emunand) tämän vaiheen neljän ensimmäisen kohdan sijaan.
 {: .notice--info}
 
-1. Käynnistä konsolisi pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 1. Mene hakemistoon `SDCARD` → `ctrtransfer`
 1. Paina (A):ta `<sarjanumero>_nand.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
 1. Paina (A):ta ottaaksesi käyttöön SysNANDin ylikirjoittamisen ja syötä annettu painikeyhdistelmä
@@ -123,7 +124,6 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais
   + Kopioi `firmware.bin` ja `cetk` SD-korttisi `/luma/`-kansioon
   + Poista kummatkin tiedostot päivitettyäsi konsolin
 1. Päivitä konsolisi menemällä järjestelmäasetuksiin (System Settings), siellä muihin asetuksiin (Other Settings) ja sitten valitsemalla järjestelmäpäivitys (System Update) aivan oikeasta reunasta
-  + **Huomaathan, että koska 11.4.0 on vasta julkaistu, esiintyy Luma3DS:llä joitakin virheitä (DS- ja GBA-pelit eivät käynnisty). Lisäksi NTR-CFW ei ole vielä yhteensopiva 11.4.0:n kanssa. Voi olla järkevää päivittää vasta sitten, kun Luma3DS:stä julkaistaan uusi versio, joka korjaa nämä virheet.**
   + Pävitykset A9LH + Luma -kokoonpanolla (joka sinulla on) ovat turvallisia
   + Varoitus New 3DS:n päivittämisestä versiolla 2.1.0 ei päde sen jälkeen, kun olet palauttanut NAND-varmuuskopion.
   + Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
@@ -131,7 +131,8 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais
 
 ##### Vaihe V – FBI:n injektointi
 
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 1. Mene hakemistoon `SDCARD` → `cias`
 1. Paina (A):ta `FBI.cia`-tiedoston kohdalla valitaksesi sen, valitse "CIA image options..." ja sitten "Mount image to drive"
 1. Paina (A):ta `.app`-tiedoston kohdalla valitaksesi sen, valitse "NCCH image options" ja sitten "Inject to H&S"
@@ -151,7 +152,8 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais
 
 ##### Vaihe VII – Health and Safetyn palauttaminen
 
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon
 1. Valitse "More..."
 1. Valitse "Restore H&S"
@@ -199,10 +201,10 @@ Voit nyt pitää (START)-painiketta pohjassa käynnistyksen aikana avataksesi Go
 Tulevaisuudessa voit päivittää arm9loaderhax-asennuksesi seuraamalla ohjeita osiossa [A9LH:n päivittäminen](updating-a9lh).
 {: .notice--info}
 
-Pidä `<sarjanumero>_nand.bin`-tiedosto tallessa; sen voi palauttaa GodMode9:n avulla, jos konsolisi sattuu vioittumaan tuelvaisuudessa.
+Käyttääksesi [NTR-CFW](https://github.com/44670/BootNTR/):tä asenna [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-Voit poistaa NAND-varmuukopiot `/files9/`-kansiosta, kunhan sinulla on ne tallessa jossakin turvallisessa paikassa.
+Pidä `<sarjanumero>_nand.bin`-tiedosto tallessa; sen voi palauttaa GodMode9:n avulla, jos konsolisi sattuu vioittumaan tuelvaisuudessa.
 {: .notice--info}
 
 {% capture notice-7 %}
@@ -221,7 +223,7 @@ Voit poistaa NAND-varmuukopiot `/files9/`-kansiosta, kunhan sinulla on ne talles
 
 <div class="notice--info">{{ notice-7 | markdownify }}</div>
 
-Tietoja konsolisi alueen vaihtamisesta toiseen saat osiosta [Alueen vaihtaminen](region-changing) page.
+Tietoja konsolisi alueen vaihtamisesta toiseen saat osiosta [Alueen vaihtaminen](region-changing).
 {: .notice--success}
 
 Tietoja A9LH:n pitämisestä ajan tasalla löydät osiosta [A9LH:n päivittäminen](updating-a9lh).

_pages/fi_FI/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ Tässä lisäosiossa opastetaan EmuNANDin sisällön siirtäminen uuteen SysNAND
 
 1. Sammuta konsolisi
 1. Aseta SD-korttisi tietokoneeseesi
-1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon ja uudelleennimeä se siellä muotoon `start_GodMode9.bin`
+1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon
 1. Aseta SD-korttisi takaisin konsoliisi
 
 ##### Vaihe II – SysNANDin DSiWare-tallennusten varmuuskopiointi
@@ -60,7 +60,8 @@ Huomaa, että tämä ei ole tarpeellista muille Virtual Console -peleille (GBC,
   + Mene hakemistoon, jonka loit tälle pelille
   + Paina (Y):tä liittääksesi `gbavc.sav`-tiedoston
   + Paina (START)-painiketta käynnistääksesi uudelleen
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 
 ##### Vaihe IV – EmuNANDin kopiointi SysNANDiin
 
@@ -108,7 +109,8 @@ Jos et varmuuskopioinut GBA VC -tallennuksia aiemmin, voit ohittaa tämän osion
   + Paina (Y):tä liittääksesi `gbavc.sav`-tiedoston
   Paina (A):ta vahvistaaksesi
   + Paina (START)-painiketta käynnistääksesi uudelleen
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 
 ##### Vaihe VII – SysNANDin varmuuskopiointi
 

_pages/fi_FI/Region-Changing.txt

@@ -51,7 +51,7 @@ Alueen vaihtaminen CTRTransferin (jota tämä menetelmä käyttää) avulla aihe
 1. Sammuta konsolisi
 1. Aseta SD-korttisi tietokoneeseesi
 1. Luo `cias`-niminen kansio SD-korttisi juureen, jos sitä ei jo ole olemassa
-1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon ja uudelleennimeä se siellä muotoon `start_GodMode9.bin`
+1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon
 1. Kopioi CTRTransfer-`.zip`-pakkauksesta 9.2.0-CTRTransfer-`.bin`-näköistiedosto SD-korttisi `/files9/`-kansioon
 1. Kopioi FBI-`.zip`-pakkauksesta `FBI.cia` SD-korttisi `/cias/`-kansioon
 1. Aseta SD-korttisi takaisin konsoliisi
@@ -79,13 +79,13 @@ Alueen vaihtaminen CTRTransferin (jota tämä menetelmä käyttää) avulla aihe
   + Paina (A):ta jatkaaksesi, kun toiminto on suoritettu
 1. Paina (START)-painiketta käynnistääksesi uudelleen
 1. Päivitä konsolisi menemällä järjestelmäasetuksiin (System Settings), siellä muihin asetuksiin (Other Settings) ja sitten valitsemalla järjestelmäpäivitys (System Update) aivan oikeasta reunasta
-  + **Huomaathan, että koska 11.4.0 on vasta julkaistu, esiintyy Luma3DS:llä joitakin virheitä (DS- ja GBA-pelit eivät käynnisty). Lisäksi NTR-CFW ei ole vielä yhteensopiva 11.4.0:n kanssa. Voi olla järkevää päivittää vasta sitten, kun Luma3DS:stä julkaistaan uusi versio, joka korjaa nämä virheet.**
   + Pävitykset A9LH + Luma -kokoonpanolla (joka sinulla on) ovat turvallisia
   + Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
 
 ##### Vaihe III – FBI:n injektointi
 
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 1. Mene hakemistoon `SDCARD` → `cias`
 1. Paina (A):ta `FBI.cia`-tiedoston kohdalla valitaksesi sen, valitse "CIA image options..." ja sitten "Mount image to drive"
 1. Paina (A):ta `.app`-tiedoston kohdalla valitaksesi sen, valitse "NCCH image options" ja sitten "Inject to H&S"
@@ -124,7 +124,8 @@ Jos sinulla ei ollut `eshop`- tai `unknown`-kansiota vaiheessa II, ohita tämä
 
 ##### Vaihe VI – Health and Safetyn palauttaminen
 
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon
 1. Valitse "More..."
 1. Valitse "Restore H&S"

_pages/fi_FI/Troubleshooting.txt

@@ -66,7 +66,8 @@ Jos et pysty käynnistämään konsoliasi, seuraa tilannettasi vastaavan kohdan
 ## <a name="gw_fbi" />H&S:n injektointi ei onnistu Gatewayn avulla taaksepäin päivitetyllä konsolilla
 Tämä johtuu Gatewayn huonosta päivitysmenetelmästä, joka jättää jokaisesta sovelluksesta kaksi versiota järjestelmään. Toista niistä ei käytetä, mutta se häiritsee H&S-injektointia saamalla sen injektoimaan väärän kappaleen.
 
-1. Avaa GodMode9 arm9loaderhaxin kautta pitämällä (START)-painiketta pohjassa konsolin käynnistyessä     
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta   
 1. Mene hakemistoon `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Mene konsolisi mallin ja alueen mukaiseen kansioon:
   + **Vanha 3DS EUR**: `00022300` -> `content`

_pages/fi_FI/Updating-A9LH.txt

@@ -47,7 +47,7 @@ Näissä ohjeissa päivitetään myös muita ohjelmia sekä AES-avaintietokanta.
 1. Poista SD-korttisi juuresta `aeskeydb.bin`, jos se on olemassa
 1. Poista SD-korttisi juuresta `a9lh`-kansio, jos se on olemassa
 1. Kopioi `aeskeydb.bin` SD-korttisi `/files9/`-kansioon
-1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon ja uudelleennimeä se siellä muotoon `start_GodMode9.bin`
+1. Kopioi GodMode9-`.zip`-pakkauksesta `GodMode9.bin` SD-korttisi `/luma/payloads/`-kansioon
   + Jos `start_Hourglass9.bin` on jo olemassa tässä kansiossa, poista se
 1. Kopioi SafeA9LHInstaller-`.zip`-pakkauksesta `arm9loaderhax.bin` SD-korttisi `/luma/payloads/`-kansioon
 1. Uudelleennimeä `/luma/payloads/`-kansiossa oleva `arm9loaderhax.bin` muotoon `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ Näissä ohjeissa päivitetään myös muita ohjelmia sekä AES-avaintietokanta.
 
 ##### Vaihe IV – Luma3DS:n asentaminen CTRNANDiin
 
-1. Käynnistä uudelleen pitäen (START)-painiketta pohjassa avataksesi GodMode9:n
+1. Avaa Luma3DS:n ketjulatausvalikko pitämällä (START)-painiketta pohjassa käynnistyksen aikana
+1. Avaa GodMode9 painamalla (A):ta
 1. Mene hakemistoon `SDCARD`
 1. Paina (Y):tä `arm9loaderhax.bin`-tiedoston kohdalla kopioidaksesi sen
 1. Paina (B):tä palataksesi päävalikkoon

_pages/fr_FR/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ L'objectif du CTRTransfert 9.2.0 est de résoudre les problèmes causés par la
 1. Éteignez votre 3DS
 1. Insérez votre carte SD dans votre ordinateur
 1. Créez un répertoire nommé `cias` à la racine de votre carte SD s'il n'existe pas déjà
-1. Copiez le fichier `GodMode9.bin` de GodMod9`.zip` dans le dossier `/luma/payloads/` de votre carte SD et renommez `GodMode9.bin` dans `/luma/payloads/` en `start_GodMode9.bin`
+1. Copiez le fichier `GodMode9.bin` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD
 1. Copiez les fichiers `.bin` et `.bin.sha` de l'image CTRtransfer 9.2.0 depuis le `.zip` de CTRtransfer vers le dossier `/files9/` de votre carte SD
 1. Copiez le fichier `FBI.cia` se trouvant dans FBI`.zip` vers le répertoire `/cias/` de votre carte SD
 1. Retirez la carte SD dans la console
 
 ##### Section II - CTRTransfer
 
-1. Ouvrez Godmode9 depuis arm9loaderhax en maintenant (Start) au démarrage
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Naviguez vers `SDCARD` -> `files9`
 1. Appuyez sur (A) sur le CTRTransfer « .bin » pour le sélectionner
 1. Sélectionnez «CTRNAND options...»
@@ -62,13 +63,13 @@ L'objectif du CTRTransfert 9.2.0 est de résoudre les problèmes causés par la
   + Appuyez sur (A) pour continuer une fois terminé
 1. Appuyez sur (Start) pour redémarrer votre système
 1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour du Système"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Mettre à jour sa console alors que A9LH et Luma3DS sont installés (ce que vous avez maintenant) n'est pas dangereux, arrêtez de poser la question
   + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
 
 ##### Section III - Injection de FBI
 
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Naviguez vers ' SDCARD ' -> ' cias '
 1. Appuyez sur (A) sur ' FBI.cia ' pour le sélectionner, puis choisissez "CIA image options...", puis "Mount image to drive"
 1. Appuyez sur (A) sur le fichier avec l'extension ` .app `, puis sélectionnez "NCCH image options", puis "Inject to H&S"
@@ -99,7 +100,8 @@ Si vous n'aviez pas de dossiers `eshop` ou `unknown`, sautez cette partie.
 
 ##### Section V - Restaurer Informations sur la santé et la sécurité
 
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
 1. Sélectionnez "More..."
 1. Sélectionnez "Restore H&S"

_pages/fr_FR/Homebrew-Launcher-(Alternatives).txt

@@ -7,13 +7,13 @@ permalink: /fr_FR/homebrew-launcher-(alternatives).html
 Il existe différentes méthodes pour lancer l'Homebrew Launcher.
 {: .notice}
 
-If you do not already own any of these games and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to download Swapdoodle for free from the eShop, then find someone online (try [this](https://www.reddit.com/r/3dshacks/comments/64yydp/)) that can send you Doodlebomb from the chart below.
+Si vous ne possédez pas déjà un de ces jeux et que vous n’avez pas un autre 3DS pouvant accéder au lanceur de Homebrew, l’option la moins chère est à télécharger Swapdoodle gratuitement l’eShop, puis trouver quelqu'un en ([ligne] (https://www.reddit.com/r/3dshacks/comments/64yydp/)) qui peuvent vous envoyer des Doodlebomb.
 {: .notice--info}
 
-If you cannot find anyone with Doodlebomb, do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below.
+Si vous ne possédez aucun de ces jeux ni une seconde 3DS ayant accès au Homebrew launcher, le moins cher est d'acheter une copie "Nintendo Selects" d'[Ocarina of Time 3D](https://amzn.to/2fkaKdp) (faites attention à bien acheter une cartouche de la région que votre console) ainsi qu'une [Powersaves](https://amzn.to/2fb3VY7) (compatible avec toutes les régions), puis de suivre les instructions concernant oot3dhax ci-dessous.
 {: .notice--info}
 
-Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS and 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
+Assurez vous que la que communication sans fil de votre appareil est allumée, comme udsploit (utilisé dans la page suivante) aura besoin du module sans fil soit actif pour fonctionner, de plus certains appareils (New 3DS et 2DS) ne peuvent pas régler la Communication sans fil depuis le l'Homebrew Launcher. La Communication sans fil doit juste être allumée; la connexion à un point d’accès n’est pas nécessaire.
 {: .notice--info}
 
 #### Ce dont vous aurez besoin

_pages/fr_FR/Homebrew-Launcher-(Soundhax).txt

@@ -10,7 +10,7 @@ Il existe différentes méthodes pour lancer l'Homebrew Launcher.
 SoundHax est compatible pour les versions du firmware comprises entre 9.0.0 et 11.3.0 pour les régions EUR, JPN, KOR et USA.
 {: .notice--info}
 
-Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS and 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.
+Assurez vous que la que communication sans fil de votre appareil est allumée, comme udsploit (utilisé dans la page suivante) aura besoin du module sans fil soit actif pour fonctionner, de plus certains appareils (New 3DS et 2DS) ne peuvent pas régler la Communication sans fil depuis le l'Homebrew Launcher. La Communication sans fil doit juste être allumée; la connexion à un point d’accès n’est pas nécessaire.
 {: .notice--info}
 
 Les mises à jour par cartouche vont mettre uniquement à jour les fonctionnalités principales telles que les Paramètres Systèmes, le Menu Home, etc. Les mises à jour par cartouche ne vont pas mettre à jour le Studio son Nintendo 3DS et les fonctionnalités Internet comme le Transfert Système, le Navigateur Internet, la Place Mii Streetpass ou le Nitendo eShop.

_pages/fr_FR/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ Durant cette étape, nous allons également configurer les programmes suivants :
 1. Copiez le fichier `arm9loaderhax.bin` de Luma3DS `.7z` à la racine de votre carte SD, en écrasant les fichiers existants si nécessaire
 1. Créez un répertoire appelé `luma` à la racine de votre carte SD
 1. Créez un répertoire appelé `payloads` dans le répertoire `luma` sur votre carte SD
-1. Copiez le fichier `GodMode9.bin` de GodMod9`.zip` dans le dossier `/luma/payloads/` de votre carte SD et renommez `GodMode9.bin` dans `/luma/payloads/` en `start_GodMode9.bin`
+1. Copiez le fichier `GodMode9.bin` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD
 1. Copiez `aeskeydb.bin` vers le répertoire `/files9/` sur votre carte SD
 
 ### Section II - Installation d’arm9loaderhax
@@ -106,7 +106,8 @@ Durant cette étape, nous allons également configurer les programmes suivants :
 Si, avant de suivre ce guide, vous aviez déjà installé une EmuNAND et que vous souhaitez transférer ces données vers votre SysNand CFW, veuillez suivre [ce guide](move-emunand) à la place des 4 premières étapes de cette section.
 {: .notice--info}
 
-1. Démarrez votre appareil tout en maintenant (Start) appuyé pour accéder à GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Naviguez vers `SDCARD` -> `ctrtransfer`
 1. Appuyez sur (A) sur `<serialnumber>_nand.bin` pour le sélectionner, puis choisissez "NAND image options...", puis "Restore SysNAND (safe)"
 1. Appuyez sur (A) pour débloquer l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
@@ -123,7 +124,6 @@ Si, avant de suivre ce guide, vous aviez déjà installé une EmuNAND et que vou
   + Copiez les fichiers `firmware.bin` et `cetk` dans le dossier `/luma/` de votre carte SD
   + Supprimez ces deux fichiers après avoir mis à jour de votre console
 1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour du Système"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Mettre à jour sa console alors que A9LH et Luma3DS sont installés (ce que vous avez maintenant) n'est pas dangereux, arrêtez de poser la question
   + L'avertissement interdisant de faire une mise à jour sur une New 3DS en 2.1.0 ne s'applique plus après avoir restauré la sauvegarde de votre NAND.
   + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
@@ -131,7 +131,8 @@ Si, avant de suivre ce guide, vous aviez déjà installé une EmuNAND et que vou
 
 ##### Section V - Injection de FBI
 
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Naviguez vers ' SDCARD ' -> ' cias '
 1. Appuyez sur (A) sur ' FBI.cia ' pour le sélectionner, puis choisissez "CIA image options...", puis "Mount image to drive"
 1. Appuyez sur (A) sur le fichier avec l'extension ` .app `, puis sélectionnez "NCCH image options", puis "Inject to H&S"
@@ -150,7 +151,8 @@ Si, avant de suivre ce guide, vous aviez déjà installé une EmuNAND et que vou
 
 ##### Section VII - Restaurer Santé et Sécurité
 
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
 1. Sélectionnez "More..."
 1. Sélectionnez "Restore H&S"
@@ -198,10 +200,10 @@ Vous pouvez maintenir (Start) lors du démarrage pour lancer GodMode9.
 Vous pourrez mettre à jour votre installation d'arm9loaderhax dans le futur en suivant les instructions sur la page [Mise à jour d'arm9loaderhax](updating-a9lh).
 {: .notice--info}
 
-Gardez votre fichier `<serialnumber>_nand.bin`, il pourra être restauré via GodMode9 pour sauver votre console d'un éventuel futur brick.
+Pour utilisez [NTR CFW] (https://github.com/44670/BootNTR/), installez [BootNTR Selector] (https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-Vous pouvez supprimer vos sauvegardes de votre NAND contenues dans `/files9/` à condition de les avoir sauvegardées ailleurs.
+Gardez votre fichier `<serialnumber>_nand.bin`, il pourra être restauré via GodMode9 pour sauver votre console d'un éventuel futur brick.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/fr_FR/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ Ceci est une section complémentaire qui vous permettra de déplacer le contenu
 
 1. Éteignez votre 3DS
 1. Insérez votre carte SD dans votre ordinateur
-1. Copiez le fichier `GodMode9.bin` de GodMod9`.zip` dans le dossier `/luma/payloads/` de votre carte SD et renommez `GodMode9.bin` dans `/luma/payloads/` en `start_GodMode9.bin`
+1. Copiez le fichier `GodMode9.bin` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD
 1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS
 
 ##### Section II - Enregistrer les sauvegardes de vos DSIWare (présentes sur votre SysNAND)
@@ -61,7 +61,8 @@ Notez que ce n’est pas nécessaire pour tout autre type de jeux Console Virtue
   + Naviguer vers le dossier que vous avez crée pour ce jeu GBA VC
   + Appuyez sur (Y) pour coller `gbavc.sav`
   + Appuyez sur (Start) pour redémarrer votre système
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 
 ##### Section IV - Copier votre EmuNAND sur votre SysNAND
 
@@ -109,7 +110,8 @@ Si vous n'avez pas fait de copies de sauvegardes GBA VC, ignorez cette section.
   + Appuyez sur (Y) pour coller `gbavc.sav`
   + Appuyez sur (A) pour confirmer
   + Appuyez sur (Start) pour redémarrer votre système
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 
 ##### Section VII - Sauvegarder votre SysNAND
 

_pages/fr_FR/Region-Changing.txt

@@ -51,7 +51,7 @@ Le changement de région de votre 3DS en utilisant un CTRTransfer (ce que vous f
 1. Éteignez votre 3DS
 1. Insérez votre carte SD dans votre ordinateur
 1. Créez un répertoire nommé `cias` à la racine de votre carte SD s'il n'existe pas déjà
-1. Copiez le fichier `GodMode9.bin` de GodMod9`.zip` dans le dossier `/luma/payloads/` de votre carte SD et renommez `GodMode9.bin` dans `/luma/payloads/` en `start_GodMode9.bin`
+1. Copiez le fichier `GodMode9.bin` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD
 1. Copiez les fichiers `.bin` et `.bin.sha` de l'image CTRtransfer 9.2.0 depuis le `.zip` de CTRtransfer vers le dossier `/files9/` de votre carte SD
 1. Copiez le fichier `FBI.cia` se trouvant dans FBI`.zip` vers le répertoire `/cias/` de votre carte SD
 1. Réinsérez votre carte SD dans votre 3DS
@@ -79,13 +79,13 @@ Le changement de région de votre 3DS en utilisant un CTRTransfer (ce que vous f
   + Appuyez sur (A) pour continuer une fois terminé
 1. Appuyez sur (Start) pour redémarrer votre système
 1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour du Système"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Mettre à jour sa console alors que A9LH et Luma3DS sont installés (ce que vous avez maintenant) n'est pas dangereux, arrêtez de poser la question
   + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
 
 ##### Section III - Injection de FBI
 
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Naviguez vers ' SDCARD ' -> ' cias '
 1. Appuyez sur (A) sur ' FBI.cia ' pour le sélectionner, puis choisissez "CIA image options...", puis "Mount image to drive"
 1. Appuyez sur (A) sur le fichier avec l'extension ` .app `, puis sélectionnez "NCCH image options", puis "Inject to H&S"
@@ -124,7 +124,8 @@ Si vous n'aviez pas de dossiers `eshop` ou `unknown`, sautez cette partie.
 
 ##### Section VI - Restauration Informations sur la santé et la sécurité
 
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu)
 1. Sélectionnez "More..."
 1. Sélectionnez "Restore H&S"

_pages/fr_FR/SafeCTRTransfer-(Homebrew-Launcher).txt

@@ -16,7 +16,7 @@ Si jusqu'à présent vous utilisiez la fonction de gestion de la carte microSD d
 Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
 {: .notice--info}
 
-Ensure your device's Wireless Communication is turned on as udsploit will need the wireless module to be active to function. Wireless Communication only has to be on; connecting it to an access point is not required.
+Assurez-vous que votre Communication sans fil est activée car udsploit en aura besoin pour fonctionner. Communication sans fil doit juste être allumée; la connexion à un point d’accès n’est pas nécessaire.
 {: .notice--info}
 
 **Pour l'instant, il est NÉCESSAIRE de connecter votre console à internet pour continuer après le CTRtransfer en 2.1.0.**

_pages/fr_FR/Troubleshooting.txt

@@ -66,7 +66,8 @@ Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(s
 ## <a name="gw_fbi" />Je ne peux pas injecter dans Santé et Sécurité sur une console downgradée via Gateway
 Cela vient de l'implémentation bancale faite par Gateway pour downgrader et qui laisse deux version de chaque application sur la console. L'une des deux est inutilisée, mais cela perturbe le système d'injection de H&S, provoquant l'injection dans la mauvaise version.
 
-1. Ouvrez Godmode9 depuis arm9loaderhax en maintenant (Start) au démarrage     
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)   
 1. Sélectionnez `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Sélectionnez le dossier correspondant à votre console et votre région:
   + **Old 3DS EUR**: `00022300` -> `content`
@@ -181,14 +182,14 @@ Si une erreur se produit pendant le processus de SafeCTRTransfer, il vous sera d
 1. Sélectionnez "Run 0:/ctrtransfer/payload.bin"
 1. Si cela fonctionne, vous avez accédé à GodMode9 avec succès
 1. Naviguez vers `SDCARD` -> `ctrtransfer`
-1. Press (Y) on `<serialnumber>_nand.bin` to copy it
+1. Appuyez sur (Y) sur `<serialnumber>_nand.bin` pour le copier
 1. Appuyez deux fois sur (B) pour revenir au menu principal
-1. Navigate to `SYSNAND VIRTUAL`
-1. Press (Y) to paste `<serialnumber>_nand.bin`
+1. Naviguez vers `SYSNAND VIRTUAL`
+1. Appuyez sur (Y) pour coller `<serialnumber>_nand.bin`
 1. Appuyez sur (A) pour confirmer
-1. Press (A) to inject into `nand.bin`
-1. Press (A) to unlock SysNAND overwriting
-1. Input the key combo given to unlock SysNAND (lvl3) writing
+1. Appuyez sur (A) pour injecter dans `nand.bin`
+1. Appuyez sur (A) pour déverrouiller l'écriture sur la SysNAND
+1. Entrez la combinaison de touche demandée pour débloquer l'écriture sur votre SysNAND (lvl3)
   + Ce processus prendra un certain temps
 1. Appuyez sur (A) pour continuer une fois terminé
 1. Appuyez sur (Start) pour redémarrer votre système

_pages/fr_FR/Updating-A9LH.txt

@@ -47,7 +47,7 @@ Ces étapes vont également mettre à jour divers payloads, et la base de donné
 1. Supprimez le fichier `aeskeydb.bin` de la racine de votre carte SD s'il existe
 1. Supprimez le répertoire `a9lh` à la racine de votre carte SD s'il existe
 1. Copiez `aeskeydb.bin` vers le répertoire `/files9/` sur votre carte SD
-1. Copiez le fichier `GodMode9.bin` de GodMod9`.zip` dans le dossier `/luma/payloads/` de votre carte SD et renommez `GodMode9.bin` dans `/luma/payloads/` en `start_GodMode9.bin`
+1. Copiez le fichier `GodMode9.bin` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD
   + Si « start_Hourglass9.bin » existe déjà dans ce dossier, supprimez le fichier
 1. Copiez le fichier `arm9loaderhax.bin` de SafeA9LHInstaller `.zip` vers le dossier `/luma/payloads/` sur votre carte SD
 1. Renommez le fichier `arm9loaderhax.bin` dans le dossier `/luma/payloads/` en `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ Ces étapes vont également mettre à jour divers payloads, et la base de donné
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Redémarrez en appuyant sur (Start) lors du démarrage de la console pour lancer GodMode9
+1. Démarrez la console en maintenant (Start) enfoncé pour accéder au menu de chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
 1. Naviguez vers « Carte SD »
 1. Appuyez sur (Y) sur `arm9loaderhax.bin` pour le copier
 1. Appuyez sur (B) pour revenir au menu principal

_pages/he_IL/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ permalink: /he_IL/9.2.0-ctrtransfer.html
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
 1. תצרו תיקייה בשם `cias` ב-SD שלכם אם לא קיימת לכם כבר תיקייה כזו
-1. העתיקו את `GodMode9.bin` מתוך הזיפ של GodMode9 אל תוך התיקייה `/luma/payloads/` שב- SD שלכם ושנו את שם הקובץ `GodMode9.bin` ל-`start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. תעתיקו את קובץ ה-`.bin` מהזיפ של הCTRransfer לתיקיית `/files9/` שבתוך ה-SD
 1. תעתיקו את `FBI.cia` מתוך הזיפ של FBI לתוך התיקייה `/cias/` שב-SD שלכם
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
 
 #### חלק II - ביצוע CTRTransfer
 
-1. תפתחו את GodMode9 מתוך arm9loaderhax על ידי החזקה של המקש (Start) בעת ההדלקה
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. נווטו אל `SDCARD` ושם אל `files9`
 1. תלחצו (A) על קובץ ה`.bin` של הCTRTransfer כדי לבחור בו
 1. תבחרו ב "CTRNAND options..."
@@ -62,13 +63,13 @@ permalink: /he_IL/9.2.0-ctrtransfer.html
   + תלחצו (A) כדי להמשיך אחרי שזה סיים
 1. תלחצו על (Start) כדי לאתחל את המכשיר
 1. עדכנו את המכשיר שלכם על ידי לחיצה על System Sttings, לאחר מכן "Other Settings", לכו ימינה עד הסוף ואז לחצו על "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
 
 ##### חלק III - הזרקת FBI
 
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. נווטו אל `SDCARD` ושם אל `cias`
 1. תלחצו (A) על `FBI.cia` כדי לבחור בו, ואז תבחרו ב "CIA image options...", ושם ב "Mount image to drive"
 1. תלחצו (A) על קובץ ה `.app`, ואז תבחרו "NCCH image options", ושם "Inject to H&S"
@@ -99,7 +100,8 @@ permalink: /he_IL/9.2.0-ctrtransfer.html
 
 ##### חלק V - שחזור Health and Safety
 
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה
 1. תבחרו ב"More..."
 1. תבחרו ב "Restore H&S"

_pages/he_IL/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ permalink: /he_IL/installing-arm9loaderhax.html
 1. תעתיקו את 'arm9loaderhax.bin' מתוך Luma3DS.7z לSD שלכם, במקום הקובץ הקיים
 1. תצרו ב-SD שלכם תיקייה חדשה בשם `luma`
 1. תצרו תיקייה חדשה בשם `payloads` בתוך התיקייה `luma` שהרגע יצרנו
-1. תעתיקו את `GodMode9.bin` מתוך הזיפ של GodMode9 אל תוך התיקייה `/luma/payloads/` שב- SD שלכם ושנו את שם הקובץ `GodMode9.bin` ל-`start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. תעתיקו את הקובץ `aeskeydb.bin` לתיקייה `/files9/` שב-SD שלכם
 
 #### חלק II - התקנת arm9loaderhax
@@ -106,7 +106,8 @@ permalink: /he_IL/installing-arm9loaderhax.html
 במקרה שבו לפני החלקת המדריך היה לכם EmuNAND מותקן וברצונכם להעביר את התוכן שלו ל-SysNAND CFW שלכם, עכשיו זה הזמן לבצע [העברת EmuNAND](move-emunand) במקום לבצע את הצעדים הראשונים בחלק זה.
 {: .notice--info}
 
-1. הדליקו את המכשיר כשאתם מחזיקים (Start) על מנת להכנס לGodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. נווטו אל `SDCARD` ושם אל `ctrtransfer`
 1. תלחצו (A) על `<serialnumber>_nand.bin` כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
 1. לחצו (A) כדי לפתוח גישת שכתוב לSysNAND, ואז תלחצו על המקשים בסדר הנכון
@@ -123,7 +124,6 @@ permalink: /he_IL/installing-arm9loaderhax.html
   + תעתיקו את `firmware.bin` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
   + תמחקו את שני הקבצים האלו לאחר שתעדכנו את ה-3DS שלכם
 1. עדכנו את המכשיר שלכם על ידי לחיצה על System Sttings, לאחר מכן "Other Settings", לכו ימינה עד הסוף ואז לחצו על "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + האזהרה בה פירטנו לא לעדכן New 3DS מגרסה 2.1.0 לא תקפה ברגע שביצעתם שחזור מגיבוי NAND.
   + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
@@ -131,7 +131,8 @@ permalink: /he_IL/installing-arm9loaderhax.html
 
 ##### חלק V - הזרקת FBI
 
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. + נווטו אל `SDCARD` ושם אל `cias`
 1. תלחצו (A) על `FBI.cia` כדי לבחור בו, ואז תבחרו ב "CIA image options...", ושם ב "Mount image to drive"
 1. תלחצו (A) על קובץ ה `.app`, ואז תבחרו "NCCH image options", ושם "Inject to H&S"
@@ -150,7 +151,8 @@ permalink: /he_IL/installing-arm9loaderhax.html
 
 ##### Section VII - Restore Health and Safety
 
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה
 1. תבחרו ב"More..."
 1. תבחרו ב "Restore H&S"
@@ -198,10 +200,10 @@ ___
 אתם יכולים לעדכן את התקנת arm9loaderhax בעתיד על ידי ביצוע המדריך [לעדכון A9LH](updating-a9lh).
 {: .notice--info}
 
-תשמרו את הקובץ `<serialnumber>_nand.bin`, שכן תוכלו לשחזר אותו בעזרת GodMode9 על מנת לתקן בריק בעתיד.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-אתם יכולים למחוק את גיבויי ה-NAND שלכם מהתיקייה `/files9/` כל עוד יש לכם עותק שלהם מגובה במקום בטוח.
+תשמרו את הקובץ `<serialnumber>_nand.bin`, שכן תוכלו לשחזר אותו בעזרת GodMode9 על מנת לתקן בריק בעתיד.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/he_IL/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ permalink: /he_IL/move-emunand.html
 
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
-1. תעתיקו את `GodMode9.bin` מתוך הזיפ של GodMode9 אל תוך התיקייה `/luma/payloads/` שב- SD שלכם ושנו את שם הקובץ `GodMode9.bin` ל-`start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
 
 ##### Section II - גיבוי שמירות DSiWare מהSysNAND
@@ -60,7 +60,8 @@ permalink: /he_IL/move-emunand.html
   + נווטו לתיקייה שיצרתם בשביל משחק הGBA VC
   + תלחצו (Y) כדי להדביק את `gbavc.sav`
   + תלחצו (Start) כדי לאתחל את המכשיר
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### חלק IV - העתקת EmuNAND אל SysNAND
 
@@ -108,7 +109,8 @@ permalink: /he_IL/move-emunand.html
   + תלחצו (Y) כדי להדביק את `gbavc.sav`
   + תלחצו (A) כדי לאשר
   + תלחצו (Start) כדי לאתחל את המכשיר
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### חלק VII - גיבוי SysNAND
 

_pages/he_IL/Region-Changing.txt

@@ -51,7 +51,7 @@ permalink: /he_IL/region-changing.html
 1. תכבו את המכשיר
 1. תכניסו את ה-SD שלכם למחשב
 1. תצרו תיקייה בשם `cias` ב-SD שלכם אם לא קיימת לכם כבר תיקייה כזו
-1. העתיקו את `GodMode9.bin` מתוך הזיפ של GodMode9 אל תוך התיקייה `/luma/payloads/` שב- SD שלכם ושנו את שם הקובץ `GodMode9.bin` ל-`start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. תעתיקו את קובץ ה-`.bin` מהזיפ של הCTRransfer לתיקיית `/files9/` שבתוך ה-SD
 1. תעתיקו את `FBI.cia` מתוך הזיפ של FBI לתוך התיקייה `/cias/` שב-SD שלכם
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
@@ -79,13 +79,13 @@ permalink: /he_IL/region-changing.html
   + תלחצו (A) כדי להמשיך אחרי שזה סיים
 1. תלחצו על (Start) כדי לאתחל את המכשיר
 1. עדכנו את המכשיר שלכם על ידי לחיצה על System Sttings, לאחר מכן "Other Settings", לכו ימינה עד הסוף ואז לחצו על "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
 
 ##### חלק III - הזרקת FBI
 
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. נווטו אל `SDCARD` ושם אל `cias`
 1. תלחצו (A) על `FBI.cia` כדי לבחור בו, ואז תבחרו ב "CIA image options...", ושם ב "Mount image to drive"
 1. תלחצו (A) על קובץ ה `.app`, ואז תבחרו "NCCH image options", ושם "Inject to H&S"
@@ -124,7 +124,8 @@ permalink: /he_IL/region-changing.html
 
 ##### חלק VI - שחזור Health and Safety
 
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. תלחצו על (Home) כדי להראות את תפריט הפעולה
 1. תבחרו ב"More..."
 1. תבחרו ב "Restore H&S"

_pages/he_IL/Troubleshooting.txt

@@ -66,7 +66,8 @@ permalink: /he_IL/troubleshooting.html
 ## <a name="gw_fbi" />אי אפשר להזריק את H&S על קונסולה ששונמכה עם Gateway
 זה קורה בגלל שGateway שנמכו בצורה מאוד גרועה, שמשאירה 2 גרסאות של כל תוכנה על הקונסולה. אחת מהם לא בשימוש, אבל זה מבלבל את מערכת הזרקת H&S, וגורם לה להכניס את FBI לקובץ הלא נכון.
 
-1. תפתחו את GodMode9 מתוך arm9loaderhax על ידי החזקה של המקש (Start) בעת ההדלקה     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. לכו ל`SYSNAND CTRNAND`ואז `title` ולבסוף`00040010`
 1. נווטו אל התיקייה לפי המכשיר שלכם:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/he_IL/Updating-A9LH.txt

@@ -47,7 +47,7 @@ permalink: /he_IL/updating-a9lh.html
 1. תמחקו את aeskeydb.bin אם הוא קיים
 1. תמחקו את התיקייה `a9lh` מה- SD שלכם אם יש לכם כזו
 1. העתיקו את הקובץ `aeskeydb.bin` לתיקייה `/files9/` שב- SD שלכם
-1. העתיקו את `GodMode9.bin` מתוך הזיפ של GodMode9 אל תוך התיקייה `/luma/payloads/` שב- SD שלכם ושנו את שם הקובץ `GodMode9.bin` ל-`start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + אם `start_Hourglass9.bin` כבר קיים בתיקייה הזאת, תמחקו אותו
 1. העתיקו את `arm9loaderhax.bin` מהזיפ של SafeA9LHInstaller אל תיקיית /luma/payloads/ ב- SD שלכם
 1. שנו את השם של `arm9loaderhax.bin` ב `/luma/payloads/` אל `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ permalink: /he_IL/updating-a9lh.html
 
 ##### סעיף IV - Luma3DS על ה- CTRNAND
 
-1. תאתחלו בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. נווטו ל`SDCARD`
 1. תלחצו (Y) על `arm9loaderhax.bin` כדי להעתיק אותו
 1. תלחצו (B) כדי לחזור לתפריט הראשי

_pages/hu_HU/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/hu_HU/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ During this process, we also setup programs such as the following:
 1. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files
 1. Create a folder named `luma` on the root of your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
 
 ##### Section II - Installing arm9loaderhax
@@ -106,7 +106,8 @@ During this process, we also setup programs such as the following:
 If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   + If this gives you an error, set your DNS settings to "auto"
@@ -131,7 +131,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section V - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 You can update your arm9loaderhax installation in the future by following the instructions on the [Updating A9LH](updating-a9lh) page.
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/hu_HU/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. Insert your SD card into your computer
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/hu_HU/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/hu_HU/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Cannot inject H&S on Gateway downgraded device
 This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Navigate to the folder for your device and region:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/hu_HU/Updating-A9LH.txt

@@ -47,7 +47,7 @@ These steps will also update your various payloads and the AES key database.
 1. Delete any existing `aeskeydb.bin` from the root of your SD card
 1. Delete the `a9lh` folder from the root of your SD card if it exists
 1. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card
 1. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ These steps will also update your various payloads and the AES key database.
 
 ##### Section IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/it_IT/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Dato che lo scopo di un CTRTransfer 9.2.0 è la risoluzione di problemi nella NA
 1. Spegni il tuo 3DS
 1. Inserisci la scheda SD nel tuo computer
 1. Se assente, crea una cartella chiamata `cias` nella directory principale della tua scheda SD
-1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` presente nella scheda SD e rinomina il file `GodMode9.bin` appena copiato in `start_GodMode9.bin`
+1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` della tua scheda SD
 1. Copia il file immagine del CTRTransfer 9.2.0 con estensione `.bin` dall'archivio `.zip` del CTRTransfer alla cartella `/files9/` presente nella scheda SD
 1. Copia il file `FBI.cia` dall'archivio`.zip` di FBI nella cartella `/cias/` della tua scheda SD
 1. Reinserisci la scheda SD nel Nintendo 3DS
 
 ##### Sezione II - CTRTransfer
 
-1. Avvia GodMode9 tramite l'arm9loaderhax tenendo premuto (Start) durante l'accensione della console
+1. Avvia il menu chainloader di Luma3DS tramite l'arm9loaderhax tenendo premuto (Start) durante l'accensione della console
+1. Avvia GodMode9 premendo (A)
 1. Entra nella cartella `SDCARD` -> `files9`
 1. Premi (A) sul file `.bin` del CTRTransfer per selezionarlo
 1. Seleziona "CTRNAND options..."
@@ -62,13 +63,13 @@ Dato che lo scopo di un CTRTransfer 9.2.0 è la risoluzione di problemi nella NA
   + Al termine del processo, premi (A) per continuare
 1. Premi (Start) per riavviare la console
 1. Aggiorna la console andando su Impostazioni della console, poi "Impostazioni generali", infine scorri a destra e seleziona "Aggiornamento"
-  + **Visto che la versione di sistema 11.4.0 è davvero recente, la versione attuale di Luma3DS ha alcuni bug (i giochi DS e GBA non si avvieranno). Inoltre, NTR CFW non è ancora compatibile con questa versione. Potresti scegliere di ritardare l'aggiornamento fino a che non verrà rilasciata una nuova versione di Luma3DS.**
   + Gli aggiornamenti effettuati usando A9LH + Luma (ora installato) sono sicuri
   + Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente
 
 ##### Sezione III - Injecting di FBI
 
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 1. Entra nella cartella `SDCARD` -> `cias`
 1. Premi (A) sul file `FBI.cia` per selezionarlo, quindi seleziona "CIA image options...", ed infine seleziona "Mount image to drive"
 1. Premi (A) sul file `.app`, quindi seleziona "NCHH image options", ed infine seleziona "Inject to H&S"
@@ -99,7 +100,8 @@ Se in precedenza non avevi le cartelle `eshop` e `unknown`, salta questa sezione
 
 ##### Sezione V - Ripristino di Informazioni per la salute e sicurezza
 
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 1. Premi il pulsante HOME per far apparire il menu delle azioni
 1. Seleziona "More..."
 1. Seleziona "Restore H&S"

_pages/it_IT/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
 1. Copia il file `arm9loaderhax.bin` dall'archivio`.7z` di Luma3DS nella root della tua scheda SD, sovrascrivendo eventuali file preesistenti
 1. Crea una cartella chiamata `luma` nella root della tua scheda SD
 1. Crea una cartella chiamata `payloads` nella cartella `luma` della tua scheda SD
-1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` presente nella scheda SD e rinomina il file `GodMode9.bin` appena copiato in `start_GodMode9.bin`
+1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` della tua scheda SD
 1. Copia il file `aeskeydb.bin` nella cartella `/files9/` della tua scheda SD
 
 ##### Sezione II - Installazione dell'arm9loaderhax
@@ -106,7 +106,8 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
 Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e vorresti ripristinare il contenuto dell'EmuNAND nella tua nuova SysNAND con CFW, segui la guida [Spostare l'EmuNAND](move-emunand) al posto di seguire i primi quattro passi indicati in questa sezione.
 {: .notice--info}
 
-1. Avvia la tua console tenendo premuto (Start) per lanciare GodMode9
+1. Avvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 1. Entra nella cartella `SDCARD` -> `ctrtransfer`
 1. Premi (A) su `<serialnumber>_nand.bin` per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
 1. Premi il pulsante (A) per sbloccare la sovrascrittura su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
@@ -123,7 +124,6 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
   + Copia i file `firmware.bin` e `cetk` nella cartella `/luma/` della tua scheda SD
   + Elimina entrambi i file dopo aver aggiornato la tua console
 1. Aggiorna la console andando su Impostazioni della console, poi "Impostazioni generali", infine scorri a destra e seleziona "Aggiornamento"
-  + **Visto che la versione di sistema 11.4.0 è davvero recente, la versione attuale di Luma3DS ha alcuni bug (i giochi DS e GBA non si avvieranno). Inoltre, NTR CFW non è ancora compatibile con questa versione. Potresti scegliere di ritardare l'aggiornamento fino a che non verrà rilasciata una nuova versione di Luma3DS.**
   + Gli aggiornamenti effettuati usando A9LH + Luma (ora installato) sono sicuri
   + L'avviso di non aggiornare un New 3DS con versione 2.1.0 non è più applicabile dopo aver ripristinato il tuo backup della NAND.
   + Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente
@@ -131,7 +131,8 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
 
 ##### Sezione V - Injecting di FBI
 
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 1. Entra nella cartella `SDCARD` -> `cias`
 1. Premi (A) sul file `FBI.cia` per selezionarlo, quindi seleziona "CIA image options...", ed infine seleziona "Mount image to drive"
 1. Premi (A) sul file `.app`, quindi seleziona "NCHH image options", ed infine seleziona "Inject to H&S"
@@ -150,7 +151,8 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
 
 ##### Sezione VII - Ripristino di Informazioni per la salute e sicurezza
 
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 1. Premi il pulsante HOME per far apparire il menu delle azioni
 1. Seleziona "More..."
 1. Seleziona "Restore H&S"
@@ -198,10 +200,10 @@ Puoi tenere premuto (Start) all'accensione della console per avviare GodMode9.
 D'ora in poi potrai aggiornare l'installazione dell'arm9loaderhax seguendo le istruzioni indicate nella pagina [Aggiornare A9LH](updating-a9lh).
 {: .notice--info}
 
-Conserva il file `<serialnumber>_nand.bin`, potrà essere ripristinato tramite GodMode9 per salvarti da un potenziale futuro brick.
+Per usare [NTR CFW](https://github.com/44670/BootNTR/), installa [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-Puoi rimuovere i backup della NAND dalla cartella `/files9/` a patto che li conservi in un'altra posizione sicura.
+Conserva il file `<serialnumber>_nand.bin`, potrà essere ripristinato tramite GodMode9 per salvarti da un potenziale futuro brick.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/it_IT/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ In questa sezione aggiuntiva verrà spiegato come spostare il contenuto di una E
 
 1. Spegni il tuo 3DS
 1. Inserisci la scheda SD nel tuo computer
-1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` presente nella scheda SD e rinomina il file `GodMode9.bin` appena copiato in `start_GodMode9.bin`
+1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` della tua scheda SD
 1. Reinserisci la scheda SD nel Nintendo 3DS
 
 ##### Sezione II - Backup dei salvataggi dei DSiWare su SysNAND
@@ -60,7 +60,8 @@ Questo processo non è necessario per giochi delle altre Virtual Console (quali
   + Entra nella cartella che hai creato per questo gioco GBA della Virtual Console
   + Premi (Y) per incollare `gbavc.sav`
   + Premi (Start) per riavviare la console
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 
 ##### Sezione IV - Copiare la EmuNAND nella SysNAND
 
@@ -108,7 +109,8 @@ Se non hai mantenuto alcun salvataggio GBA della Virtual Console, salta questa s
   + Premi (Y) per incollare `gbavc.sav`
   + Premi il pulsante (A) per confermare
   + Premi (Start) per riavviare la console
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 
 ##### Sezione VII - Backup della SysNAND
 

_pages/it_IT/Region-Changing.txt

@@ -51,7 +51,7 @@ Il cambio regione tramite CTRTransfer (effettuato in questa guida) sembra far sm
 1. Spegni il tuo 3DS
 1. Inserisci la scheda SD nel tuo computer
 1. Se assente, crea una cartella chiamata `cias` nella directory principale della tua scheda SD
-1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` presente nella scheda SD e rinomina il file `GodMode9.bin` appena copiato in `start_GodMode9.bin`
+1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` della tua scheda SD
 1. Copia il file immagine del CTRTransfer 9.2.0 con estensione `.bin` dall'archivio `.zip` del CTRTransfer alla cartella `/files9/` presente nella scheda SD
 1. Copia il file `FBI.cia` dall'archivio`.zip` di FBI nella cartella `/cias/` della tua scheda SD
 1. Reinserisci la scheda SD nel Nintendo 3DS
@@ -79,13 +79,13 @@ Il cambio regione tramite CTRTransfer (effettuato in questa guida) sembra far sm
   + Al termine del processo, premi (A) per continuare
 1. Premi (Start) per riavviare la console
 1. Aggiorna la console andando su Impostazioni della console, poi "Impostazioni generali", infine scorri a destra e seleziona "Aggiornamento"
-  + **Visto che la versione di sistema 11.4.0 è davvero recente, la versione attuale di Luma3DS ha alcuni bug (i giochi DS e GBA non si avvieranno). Inoltre, NTR CFW non è ancora compatibile con questa versione. Potresti scegliere di ritardare l'aggiornamento fino a che non verrà rilasciata una nuova versione di Luma3DS.**
   + Gli aggiornamenti effettuati usando A9LH + Luma (ora installato) sono sicuri
   + Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente
 
 ##### Sezione III - Injecting di FBI
 
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 1. Entra nella cartella `SDCARD` -> `cias`
 1. Premi (A) sul file `FBI.cia` per selezionarlo, quindi seleziona "CIA image options...", ed infine seleziona "Mount image to drive"
 1. Premi (A) sul file `.app`, quindi seleziona "NCHH image options", ed infine seleziona "Inject to H&S"
@@ -124,7 +124,8 @@ Se in precedenza non avevi le cartelle `eshop` e `unknown`, salta questa sezione
 
 ##### Sezione VI - Ripristino di Informazioni per la salute e sicurezza
 
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 1. Premi il pulsante HOME per far apparire il menu delle azioni
 1. Seleziona "More..."
 1. Seleziona "Restore H&S"

_pages/it_IT/Troubleshooting.txt

@@ -66,7 +66,8 @@ Se non riesci ad avviare la tua console, consulta la sezione relativa al tuo pro
 ## <a name="gw_fbi" />Impossibile eseguire l'inject di "Informazioni per la salute e la sicurezza" su console downgradate tramite Gateway
 Questo problema è dovuto alla pessima implementazione da parte di Gateway di una procedura di downgrade, che duplica ogni applicazione installata nel sistema. Una di queste copie rimane inutilizzata, ma confonde il programma per l'inject di H&S e gli impedisce di modificare l'applicazione corretta.
 
-1. Avvia GodMode9 tramite l'arm9loaderhax tenendo premuto (Start) durante l'accensione della console     
+1. Avvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)   
 1. Entra nella cartella `SYSNAND CTRNAND` -> `title` -> `00040010`
 1. Spostati nella cartella corretta a seconda della tua console e della sua regione:
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/it_IT/Updating-A9LH.txt

@@ -47,7 +47,7 @@ Questa procedura aggiornerà anche i vari payload e il database delle chiavi AES
 1. Se presente, elimina il file `aeskeydb.bin` dalla root della tua scheda SD
 1. Se presente, elimina la cartella `a9lh` dalla root della tua scheda SD
 1. Copia il file `aeskeydb.bin`nella cartella `/files9` della scheda SD
-1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` presente nella scheda SD e rinomina il file `GodMode9.bin` appena copiato in `start_GodMode9.bin`
+1. Copia il file `GodMode9.bin` dall'archivio `.zip` di GodMode9 nella cartella `/luma/payloads/` della tua scheda SD
   + Se presente, elimina il file`start_Hourglass9.bin` da questa cartella
 1. Copia il file `arm9loaderhax.bin` dall'archivio `.zip` di SafeA9LHInstaller nella cartella `/luma/payloads/` della tua scheda SD
 1. Rinomina il file `arm9loaderhax.bin` presente in `/luma/payloads/` in `down_safea9lhinstaller.bin`
@@ -80,7 +80,8 @@ Questa procedura aggiornerà anche i vari payload e il database delle chiavi AES
 
 ##### Sezione IV - CTRNAND Luma3DS
 
-1. Riavvia la console tenendo premuto (Start) per avviare GodMode9
+1. Riavvia la console tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
 1. Entra in `SDCARD`
 1. Premi (Y) sul file `arm9loaderhax.bin` per copiarlo
 1. Premi (B) per ritornare al menu principale

_pages/ja_JP/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. FBI `.zip`から`FBI.cia`をSDカードの`/cias/`フォルダにコピーします
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + エラーが発生すれば、DNS設定を「自動」に変更してください
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/ja_JP/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし
 1. Luma3DS `.7z`から`arm9loaderhax.bin`をSDカードのルートにコピーし、既存のファイルを上書きします
 1. `luma`というフォルダをSDカードのルートに作成します
 1. `payloads`というフォルダをSDカードの`luma`フォルダに作成します
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. `aeskeydb.bin`をSDカードの`/files9/`フォルダにコピーします
 
 ##### セクション II - arm9loaderhaxをインストールする
@@ -106,7 +106,8 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし
 次のステップを行う前に、もしもうEmuNANDセットアップを持っており、既存のEmuNANDコンテンツを今のSysNAND CFWに移行したいなら、次の最初の四つのステップをする代わりに、[EmuNANDのデータ移行をご覧ください](move-emunand) 。
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし
   + `firmware.bin`と`cetk`をSDカードの`/luma/`フォルダにコピーします
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + 前は2.1.0でNew 3DSを絶対に更新しないと警告していましたが、NANDバックアップを復元した後は更新しても問題がありません。
   + エラーが発生すれば、DNS設定を「自動」に変更してください
@@ -131,7 +131,8 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし
 
 ##### セクション V - FBI を注入する
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 今後は[A9LHを更新する](updating-a9lh)ページの指示に従って、arm9loaderhaxのバージョンを更新できます。
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-もうNANDバックアップを安全な場所にコピーしたら、`/files9/`からそれを削除できます。
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/ja_JP/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ permalink: /ja_JP/move-emunand.html
 
 1. Power off your device
 1. パソコンにSDカードを入れます
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/ja_JP/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. パソコンにSDカードを入れます
 1. SDカードのルートに`cias`というフォルダが存在しない場合、それを作成します
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. FBI `.zip`から`FBI.cia`をSDカードの`/cias/`フォルダにコピーします
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + エラーが発生すれば、DNS設定を「自動」に変更してください
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/ja_JP/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />Gatewayでダウングレードしたデバイスでは「安全に使用するために」アプリを注入できない
 その原因は、Gatewayのダウングレード方法に大きな不具合があって、システムにアプリそれぞれ二つのバージョンを残してしまいました。 One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. `SYSNAND CTRNAND` -> `title` -> `00040010`まで移動します
 1. ご使用のデバイスのモデルと地域によって、正しいフォルダに移動します
   + **Old 3DS EUR**: `00022300` -> `content`

_pages/ja_JP/Updating-A9LH.txt

@@ -47,7 +47,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 1. SDカードのルートにある既存の`aeskeydb.bin`を削除します
 1. SDカードのルートに`a9lh`フォルダが存在する場合、それを削除します
 1. `aeskeydb.bin`をSDカードの`/files9/`フォルダにコピーします
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. SafeA9LHInstaller `.zip`から`arm9loaderhax.bin`をSDカードの`/luma/payloads/`フォルダにコピーします
 1. `/luma/payloads/`の中にある`arm9loaderhax.bin`の名前を`down_safea9lhinstaller.bin`に変更します
@@ -80,7 +80,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 ##### セクション IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/ko_KR/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Insert your SD card into your computer
 1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + 오류가 발생한다면, DNS 설정을 "자동"으로 설정하십시오.
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/ko_KR/Installing-arm9loaderhax.txt

@@ -68,7 +68,7 @@ arm9loaderhax를 설치하고 Luma3DS의 설정이 완료되면 백업을 복원
 1. Luma3DS `.7z` 파일에서 `arm9loaderhax.bin` 파일을 SD 카드의 최상위 경로에 복사하고 기존 파일을 덮어쓰세요.
 1. SD 카드의 최상위 경로에 `luma` 폴더를 만드세요.
 1. SD 카드의 `luma` 폴더에 `payloads` 폴더를 만드세요.
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. `aeskeydb.bin` 파일을 SD 카드의 `/files9/` 폴더에 복사하세요.
 
 ##### 섹션 II - arm9loaderhax 설치
@@ -106,7 +106,8 @@ arm9loaderhax를 설치하고 Luma3DS의 설정이 완료되면 백업을 복원
 EmuNAND 기반의 커스텀 펌웨어의 데이터를 새 SysNAND 커스텀 펌웨어로 옮기고 싶은 경우, 이 섹션의 단계 1-4 대신에 [EmuNAND 이사](move-emunand) 가이드에 따라 진행하세요.
 {: .notice--info}
 
-1. Boot your device while holding (Start) to enter GodMode9
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `ctrtransfer`
 1. Press (A) on `<serialnumber>_nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
@@ -123,7 +124,6 @@ EmuNAND 기반의 커스텀 펌웨어의 데이터를 새 SysNAND 커스텀 펌
   + `firmware.bin` 파일과 `cetk` 파일을 SD 카드의 `/luma/` 폴더에 복사하세요.
   + Delete both of these files after updating your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + 2.1.0 버전의 뉴 3DS를 절대로 업데이트하지 말라는 경고는 NAND 백업을 복원한 시점부터 해당되지 않습니다.
   + 오류가 발생한다면, DNS 설정을 "자동"으로 설정하십시오.
@@ -131,7 +131,8 @@ EmuNAND 기반의 커스텀 펌웨어의 데이터를 새 SysNAND 커스텀 펌
 
 ##### 섹션 V - FBI 주입
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -150,7 +151,8 @@ EmuNAND 기반의 커스텀 펌웨어의 데이터를 새 SysNAND 커스텀 펌
 
 ##### Section VII - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"
@@ -198,10 +200,10 @@ You can now hold (Start) on boot to launch GodMode9.
 추후에 arm9loaderhax를 업데이트 하고자 할 경우 [A9LH 업데이트](updating-a9lh) 페이지를 참고하세요.
 {: .notice--info}
 
-Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
+To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
 {: .notice--info}
 
-백업한 NAND 파일을 안전한 장소에 복사해뒀다면 `/files9/` 폴더에서 NAND 백업을 삭제해도 됩니다.
+Keep your `<serialnumber>_nand.bin` file, it can be restored by GodMode9 to save you from a brick in the future.
 {: .notice--info}
 
 {% capture notice-7 %}

_pages/ko_KR/Move-EmuNAND.txt

@@ -22,7 +22,7 @@ This is an add-on section for moving the contents of a previous EmuNAND to your
 
 1. Power off your device
 1. SD 카드를 컴퓨터에 삽입하세요.
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Reinsert your SD card into your device
 
 ##### Section II - Backup SysNAND DSiWare Saves
@@ -60,7 +60,8 @@ Note that this is not necessary for any other kind of Virtual Console games (GBC
   + Navigate to the folder you created for this GBA VC game
   + Press (Y) to paste `gbavc.sav`
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section IV - Copy EmuNAND to SysNAND
 
@@ -108,7 +109,8 @@ If you did not backup GBA VC Saves earlier, skip this section.
   + Press (Y) to paste `gbavc.sav`
   + Press (A) to confirm
   + Press (Start) to reboot your device
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 
 ##### Section VII - Backup SysNAND
 

_pages/ko_KR/Region-Changing.txt

@@ -51,7 +51,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 1. Power off your device
 1. SD 카드를 컴퓨터에 삽입하세요.
 1. SD 카드의 최상위 경로에 `cias` 폴더가 없을 경우 폴더를 만드세요.
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. FBI `.zip` 파일에서 `FBI.cia` 파일을 SD 카드의 `/cias/` 폴더에 복사하세요.
 1. Reinsert your SD card into your device
@@ -79,13 +79,13 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + 오류가 발생한다면, DNS 설정을 "자동"으로 설정하십시오.
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -124,7 +124,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section VI - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"

_pages/ko_KR/Troubleshooting.txt

@@ -66,7 +66,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 ## <a name="gw_fbi" />게이트웨이를 사용하여 다운그레이드한 기기에서 '안전을 위한 주의사항' 앱에 주입을 할 수 없습니다.
 이는 Gateway가 시스템에 두 가지 버전의 같은 앱을 남기는 매우 조잡한 다운그레이드 방법을 사용하기 때문에 나타나는 증상입니다. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one.
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot     
+1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)   
 1. `SYSNAND CTRNAND` -> `title` -> `00040010`로 이동하세요.
 1. 모델 및 지역에 맞는 폴더로 이동하세요:
   + **구 3DS EUR**: `00022300` -> `content`

_pages/ko_KR/Updating-A9LH.txt

@@ -47,7 +47,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 1. SD 카드의 최상위 경로에 `aeskeydb.bin` 파일이 있으면 삭제하세요.
 1. SD 카드의 최상위 경로에 `a9lh` 폴더가 있으면 이를 삭제하세요.
 1. `aeskeydb.bin` 파일을 SD 카드의 `/files9/` 폴더에 복사하세요.
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
   + If `start_Hourglass9.bin` already exists in this folder, delete `start_Hourglass9.bin`
 1. SafeA9LHInstaller `.zip` 파일에서 `arm9loaderhax.bin` 파일을 SD 카드의 `/luma/payloads/` 폴더에 복사하세요.
 1. `/luma/payloads/` 폴더 안의 `arm9loaderhax.bin` 파일의 이름을 `down_safea9lhinstaller.bin`으로 변경하세요.
@@ -80,7 +80,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 
 ##### 섹션 IV - CTRNAND Luma3DS
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD`
 1. Press (Y) on `arm9loaderhax.bin` to copy it
 1. Press (B) to return to the main menu

_pages/ms_MY/9.2.0-ctrtransfer.txt

@@ -34,14 +34,15 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
 1. Power off your device
 1. Pasang kad SD anda ke dalam komputer
 1. Cipta satu folder bernama `cias` pada root kad SD anda jika ianya tidak pernah wujud
-1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `start_GodMode9.bin`
+1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
 1. Copy the 9.2.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/files9/` folder on your SD card
 1. Salin `FBI.cia` dari FBI`.zip` ke dalam folder `/cias/` pada SD kad anda
 1. Reinsert your SD card into your device
 
 ##### Section II - CTRTransfer
 
-1. Launch GodMode9 from arm9loaderhax by holding (Start) during boot
+1. Launch the Luma3DS chainloader menu from arm9loaderhax by holding (Start) during boot
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `files9`
 1. Press (A) on the CTRTransfer `.bin` to select it
 1. Select "CTRNAND options..."
@@ -62,13 +63,13 @@ Because the point of the 9.2.0 CTRTransfer is to troubleshoot issues caused by t
   + Press (A) to continue once it has completed
 1. Press (Start) to reboot your device
 1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
-  + **Note that, as 11.4.0 is very recent, some Luma3DS bugs exist on it (DS and GBA games will not launch). Additionally, NTR CFW is not yet compatible with 11.4.0. You may choose to delay updating for now until a new Luma3DS version is released that fixes these bugs.**
   + Updates while using A9LH + Luma (what you have) are safe
   + Jika terdapat error, set DNS settings anda ke "auto"
 
 ##### Section III - Injecting FBI
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Navigate to `SDCARD` -> `cias`
 1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
@@ -99,7 +100,8 @@ If you had no `eshop` or `unknown` folders earlier, skip this section.
 
 ##### Section V - Restore Health and Safety
 
-1. Reboot holding (Start) during boot to launch GodMode9
+1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
 1. Press (Home) to bring up the action menu
 1. Select "More..."
 1. Select "Restore H&S"