diff --git a/_pages/ar_SA/bannerbomb3-fredtool-(twn).txt b/_pages/ar_SA/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/ar_SA/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ar_SA/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/ar_SA/bannerbomb3.txt b/_pages/ar_SA/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/ar_SA/bannerbomb3.txt +++ b/_pages/ar_SA/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/ar_SA/faq.txt b/_pages/ar_SA/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/ar_SA/faq.txt +++ b/_pages/ar_SA/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/ar_SA/get-started.txt b/_pages/ar_SA/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/ar_SA/get-started.txt +++ b/_pages/ar_SA/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/ar_SA/home.txt b/_pages/ar_SA/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/ar_SA/home.txt +++ b/_pages/ar_SA/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/ar_SA/installing-boot9strap-(fredtool).txt b/_pages/ar_SA/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/ar_SA/installing-boot9strap-(fredtool).txt +++ b/_pages/ar_SA/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt b/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/ar_SA/installing-boot9strap-(pichaxx).txt b/_pages/ar_SA/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/ar_SA/installing-boot9strap-(pichaxx).txt +++ b/_pages/ar_SA/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/ar_SA/seedminer.txt b/_pages/ar_SA/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/ar_SA/seedminer.txt +++ b/_pages/ar_SA/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/bg_BG/bannerbomb3-fredtool-(twn).txt b/_pages/bg_BG/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/bg_BG/bannerbomb3-fredtool-(twn).txt +++ b/_pages/bg_BG/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/bg_BG/bannerbomb3.txt b/_pages/bg_BG/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/bg_BG/bannerbomb3.txt +++ b/_pages/bg_BG/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/bg_BG/faq.txt b/_pages/bg_BG/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/bg_BG/faq.txt +++ b/_pages/bg_BG/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/bg_BG/get-started.txt b/_pages/bg_BG/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/bg_BG/get-started.txt +++ b/_pages/bg_BG/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/bg_BG/home.txt b/_pages/bg_BG/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/bg_BG/home.txt +++ b/_pages/bg_BG/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/bg_BG/installing-boot9strap-(fredtool).txt b/_pages/bg_BG/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/bg_BG/installing-boot9strap-(fredtool).txt +++ b/_pages/bg_BG/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt b/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt +++ b/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/bg_BG/installing-boot9strap-(pichaxx).txt b/_pages/bg_BG/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/bg_BG/installing-boot9strap-(pichaxx).txt +++ b/_pages/bg_BG/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/bg_BG/seedminer.txt b/_pages/bg_BG/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/bg_BG/seedminer.txt +++ b/_pages/bg_BG/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/ca_ES/bannerbomb3-fredtool-(twn).txt b/_pages/ca_ES/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/ca_ES/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ca_ES/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/ca_ES/bannerbomb3.txt b/_pages/ca_ES/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/ca_ES/bannerbomb3.txt +++ b/_pages/ca_ES/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/ca_ES/faq.txt b/_pages/ca_ES/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/ca_ES/faq.txt +++ b/_pages/ca_ES/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/ca_ES/get-started.txt b/_pages/ca_ES/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/ca_ES/get-started.txt +++ b/_pages/ca_ES/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/ca_ES/home.txt b/_pages/ca_ES/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/ca_ES/home.txt +++ b/_pages/ca_ES/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/ca_ES/installing-boot9strap-(fredtool).txt b/_pages/ca_ES/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/ca_ES/installing-boot9strap-(fredtool).txt +++ b/_pages/ca_ES/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt b/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/ca_ES/installing-boot9strap-(pichaxx).txt b/_pages/ca_ES/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/ca_ES/installing-boot9strap-(pichaxx).txt +++ b/_pages/ca_ES/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/ca_ES/seedminer.txt b/_pages/ca_ES/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/ca_ES/seedminer.txt +++ b/_pages/ca_ES/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt b/_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt +++ b/_pages/cs_CZ/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/cs_CZ/bannerbomb3.txt b/_pages/cs_CZ/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/cs_CZ/bannerbomb3.txt +++ b/_pages/cs_CZ/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/cs_CZ/faq.txt b/_pages/cs_CZ/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/cs_CZ/faq.txt +++ b/_pages/cs_CZ/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/cs_CZ/get-started.txt b/_pages/cs_CZ/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/cs_CZ/get-started.txt +++ b/_pages/cs_CZ/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/cs_CZ/home.txt b/_pages/cs_CZ/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/cs_CZ/home.txt +++ b/_pages/cs_CZ/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt +++ b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt b/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt +++ b/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt b/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt +++ b/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/cs_CZ/seedminer.txt b/_pages/cs_CZ/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/cs_CZ/seedminer.txt +++ b/_pages/cs_CZ/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/de_DE/bannerbomb3-fredtool-(twn).txt b/_pages/de_DE/bannerbomb3-fredtool-(twn).txt index 05172a5940..32892c355e 100644 --- a/_pages/de_DE/bannerbomb3-fredtool-(twn).txt +++ b/_pages/de_DE/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/de_DE/bannerbomb3.txt b/_pages/de_DE/bannerbomb3.txt index 1f52c42a5a..1555caaef9 100644 --- a/_pages/de_DE/bannerbomb3.txt +++ b/_pages/de_DE/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### Was du brauchst diff --git a/_pages/de_DE/faq.txt b/_pages/de_DE/faq.txt index ddd7b2a01f..ac45019b6d 100644 --- a/_pages/de_DE/faq.txt +++ b/_pages/de_DE/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -** A: ** Ja! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +** A: ** Ja! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/de_DE/get-started.txt b/_pages/de_DE/get-started.txt index 5404802c56..de3f299064 100644 --- a/_pages/de_DE/get-started.txt +++ b/_pages/de_DE/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/de_DE/home.txt b/_pages/de_DE/home.txt index debb546ce9..d0e4d4635c 100644 --- a/_pages/de_DE/home.txt +++ b/_pages/de_DE/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Eine vollständige Anleitung für 3DS Custom Firmware,
von original zu boot9strap.
" # --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Lies alle Einleitungsseiten gründlich durch (einschließlich dieser), bevor du fortfährst. {: .notice--info} diff --git a/_pages/de_DE/installing-boot9strap-(fredtool).txt b/_pages/de_DE/installing-boot9strap-(fredtool).txt index 411024f7a2..3eb433e485 100644 --- a/_pages/de_DE/installing-boot9strap-(fredtool).txt +++ b/_pages/de_DE/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. Dies ist eine zurzeit funktionierende Implementation des "FIRM Partitions Known-Plaintext"-Exploits. Details findest du [hier](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/de_DE/installing-boot9strap-(kartdlphax).txt b/_pages/de_DE/installing-boot9strap-(kartdlphax).txt index 78ad2bd94b..6305fb1475 100644 --- a/_pages/de_DE/installing-boot9strap-(kartdlphax).txt +++ b/_pages/de_DE/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/de_DE/installing-boot9strap-(pichaxx).txt b/_pages/de_DE/installing-boot9strap-(pichaxx).txt index a9b814ec11..7e69680adf 100644 --- a/_pages/de_DE/installing-boot9strap-(pichaxx).txt +++ b/_pages/de_DE/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/de_DE/seedminer.txt b/_pages/de_DE/seedminer.txt index 657a58bed8..1f6c20e12c 100644 --- a/_pages/de_DE/seedminer.txt +++ b/_pages/de_DE/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/el_GR/bannerbomb3-fredtool-(twn).txt b/_pages/el_GR/bannerbomb3-fredtool-(twn).txt index 3ef38f4ec7..28289121e0 100644 --- a/_pages/el_GR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/el_GR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/el_GR/bannerbomb3.txt b/_pages/el_GR/bannerbomb3.txt index 2be6c07d41..bd808becd6 100644 --- a/_pages/el_GR/bannerbomb3.txt +++ b/_pages/el_GR/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/el_GR/faq.txt b/_pages/el_GR/faq.txt index 73b87b1d5f..f4e8ba4c80 100644 --- a/_pages/el_GR/faq.txt +++ b/_pages/el_GR/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**Α:** Ναι! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**Α:** Ναι! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/el_GR/get-started.txt b/_pages/el_GR/get-started.txt index 3bff5f3109..a59b5bafa2 100644 --- a/_pages/el_GR/get-started.txt +++ b/_pages/el_GR/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/el_GR/home.txt b/_pages/el_GR/home.txt index 8027333e15..573262def9 100644 --- a/_pages/el_GR/home.txt +++ b/_pages/el_GR/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/el_GR/installing-boot9strap-(fredtool).txt b/_pages/el_GR/installing-boot9strap-(fredtool).txt index dbe08f1869..53a17ed04e 100644 --- a/_pages/el_GR/installing-boot9strap-(fredtool).txt +++ b/_pages/el_GR/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/el_GR/installing-boot9strap-(kartdlphax).txt b/_pages/el_GR/installing-boot9strap-(kartdlphax).txt index bebecc0604..a8e636f4c8 100644 --- a/_pages/el_GR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/el_GR/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/el_GR/installing-boot9strap-(pichaxx).txt b/_pages/el_GR/installing-boot9strap-(pichaxx).txt index e3c92110c8..90225d7d82 100644 --- a/_pages/el_GR/installing-boot9strap-(pichaxx).txt +++ b/_pages/el_GR/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/el_GR/seedminer.txt b/_pages/el_GR/seedminer.txt index f27426ea87..32e4e9cade 100644 --- a/_pages/el_GR/seedminer.txt +++ b/_pages/el_GR/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/en_PT/bannerbomb3-fredtool-(twn).txt b/_pages/en_PT/bannerbomb3-fredtool-(twn).txt index 1b3abc776d..96effa3d88 100644 --- a/_pages/en_PT/bannerbomb3-fredtool-(twn).txt +++ b/_pages/en_PT/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/en_PT/bannerbomb3.txt b/_pages/en_PT/bannerbomb3.txt index f5b9a8dbe3..6fc80a0a5a 100644 --- a/_pages/en_PT/bannerbomb3.txt +++ b/_pages/en_PT/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/en_PT/faq.txt b/_pages/en_PT/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/en_PT/faq.txt +++ b/_pages/en_PT/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/en_PT/get-started.txt b/_pages/en_PT/get-started.txt index 6fb16cfad1..7ece9de7dd 100644 --- a/_pages/en_PT/get-started.txt +++ b/_pages/en_PT/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/en_PT/home.txt b/_pages/en_PT/home.txt index 473485267d..67edba5e60 100644 --- a/_pages/en_PT/home.txt +++ b/_pages/en_PT/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all 'o th' introductory pages (includin' 'tis one!) before proceedin' onward. {: .notice--info} diff --git a/_pages/en_PT/installing-boot9strap-(fredtool).txt b/_pages/en_PT/installing-boot9strap-(fredtool).txt index fbf1428ac4..fd41306329 100644 --- a/_pages/en_PT/installing-boot9strap-(fredtool).txt +++ b/_pages/en_PT/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/en_PT/installing-boot9strap-(kartdlphax).txt b/_pages/en_PT/installing-boot9strap-(kartdlphax).txt index 7313f93631..2890eb4517 100644 --- a/_pages/en_PT/installing-boot9strap-(kartdlphax).txt +++ b/_pages/en_PT/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/en_PT/installing-boot9strap-(pichaxx).txt b/_pages/en_PT/installing-boot9strap-(pichaxx).txt index c8d13e75cc..292347bd8c 100644 --- a/_pages/en_PT/installing-boot9strap-(pichaxx).txt +++ b/_pages/en_PT/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/en_PT/seedminer.txt b/_pages/en_PT/seedminer.txt index 4bd642e695..bae2ee56ed 100644 --- a/_pages/en_PT/seedminer.txt +++ b/_pages/en_PT/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/es_ES/bannerbomb3-fredtool-(twn).txt b/_pages/es_ES/bannerbomb3-fredtool-(twn).txt index 492a1c23ed..259f816b5e 100644 --- a/_pages/es_ES/bannerbomb3-fredtool-(twn).txt +++ b/_pages/es_ES/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/es_ES/bannerbomb3.txt b/_pages/es_ES/bannerbomb3.txt index cd7f22e266..313d154721 100644 --- a/_pages/es_ES/bannerbomb3.txt +++ b/_pages/es_ES/bannerbomb3.txt @@ -13,7 +13,7 @@ Para lograrlo, usamos la clave de cifrado de tu sistema (movable.sed) para crear Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### Qué necesitas diff --git a/_pages/es_ES/faq.txt b/_pages/es_ES/faq.txt index 3b679b76bc..20661d32df 100644 --- a/_pages/es_ES/faq.txt +++ b/_pages/es_ES/faq.txt @@ -4,11 +4,12 @@ title: "Preguntas Frecuentes" {% include toc title="Tabla de Contenidos"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Esto es lo que deberías saber: +**3DS firmware 11.16.0 was recently released**. Esto es lo que deberías saber: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -Si tu consola tiene una versión antigua de Luma, debes [actualizar Luma] (restaurando-actualizando-cfw) antes de actualizar tu consola a 11.15.0. -No se conoce que algún título hombrew haya sido afectado por esta actualización. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ No se conoce que algún título hombrew haya sido afectado por esta actualizaci ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. ¿Es mi consola hackeable sin ningún hardware externo?* -**R:** ¡Sí! El último firmware (11.15.0) tiene un método gratis para conseguir CFW llamado [Seedminer](seedminer). +**R:** ¡Sí! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **R:** Las instrucciones son las mismas para todas las consolas 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, y New 2DS XL de venta en tiendas. Si la versión del sistema se muestra como "0.0.0-0", entonces podrías tener una unidad de desarrollador. diff --git a/_pages/es_ES/get-started.txt b/_pages/es_ES/get-started.txt index c7a654c5f6..2b1558ba33 100644 --- a/_pages/es_ES/get-started.txt +++ b/_pages/es_ES/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Ve a Configuración de la Consola -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Actualiza tu 3DS a la última versión a través de la aplicación Configuración de la consola @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Instalar boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requiere una 3DS con custom firmware y una copia de Mario Kart 7 1. [ntrboot](ntrboot) - requiere una flashcart de DS compatible 1. [Instalación de boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requiere hacer soldaduras diff --git a/_pages/es_ES/home.txt b/_pages/es_ES/home.txt index 79280ba096..dda41a49e6 100644 --- a/_pages/es_ES/home.txt +++ b/_pages/es_ES/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Una guía completa de custom firmware para 3DS,
desde stock a boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Esto es lo que deberías saber: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Lee detenidamente todas las páginas de introducción (incluido ésta) antes de proceder. {: .notice--info} diff --git a/_pages/es_ES/installing-boot9strap-(fredtool).txt b/_pages/es_ES/installing-boot9strap-(fredtool).txt index aadfd3b114..bb4d8e66ba 100644 --- a/_pages/es_ES/installing-boot9strap-(fredtool).txt +++ b/_pages/es_ES/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Instalar Boot9strap (Fredtool)" ### Lectura requerida +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Este método de uso de Seedminer, para hacer un mejor exploit, utiliza tu archivo `movable.sed` para desencriptar cualquier título de DSiWare con el objetivo de inyectar un título de DSiWare vulnerable en la aplicación de Configuración de Internet de DS. Esto requiere que tengas una copia de seguridad de un título de DSiWare, por ejemplo, el proveniente de BannerBomb o la herramienta DSiWare Dumper. Todo esto son implementaciones funcionales del exploit "Particiones FIRM de texto plano conocido" detallado [aquí](https://www.3dbrew.org/wiki/3DS_System_Flaws) (*en inglés*). diff --git a/_pages/es_ES/installing-boot9strap-(kartdlphax).txt b/_pages/es_ES/installing-boot9strap-(kartdlphax).txt index 592dc0d8d8..87c0eab4ac 100644 --- a/_pages/es_ES/installing-boot9strap-(kartdlphax).txt +++ b/_pages/es_ES/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Instalar boot9strap (kartdlphax)" ### Lectura requerida +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax es un exploit para el Modo Descarga de Mario Kart 7. Se puede utilizar junto con universal-otherapp para instalar custom firmware en otras consolas. Para seguir estas instrucciones, necesitarás lo siguiente: diff --git a/_pages/es_ES/installing-boot9strap-(pichaxx).txt b/_pages/es_ES/installing-boot9strap-(pichaxx).txt index 05b9b2d4c5..a651cdb293 100644 --- a/_pages/es_ES/installing-boot9strap-(pichaxx).txt +++ b/_pages/es_ES/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Instalar boot9strap (PicHaxx)" ### Lectura requerida +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Este método que emplea Seedminer para mayor acceso utiliza tu archivo `movable.sed` para generar un archivo de guardado personalizado para Pokémon Picross, el cual puede ser usado en conjunto con universal-otherapp para ejecutar SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/es_ES/installing-boot9strap-(usm).txt b/_pages/es_ES/installing-boot9strap-(usm).txt index f5c7fe8ce8..78d1e49458 100644 --- a/_pages/es_ES/installing-boot9strap-(usm).txt +++ b/_pages/es_ES/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ Una vez que el perfil de WiFi ha sido inyectado, usaremos SAFE_MODE, que consist Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema. -If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). Para ayuda con este asunto, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedir, en inglés, que te ayuden. +If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. {: .notice--warning} ### Qué necesitas diff --git a/_pages/es_ES/seedminer.txt b/_pages/es_ES/seedminer.txt index 658f96ed2b..f055ae56c3 100644 --- a/_pages/es_ES/seedminer.txt +++ b/_pages/es_ES/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recomendado) - -Este método que emplea Seedminer para mayor acceso utiliza tu archivo `movable.sed` para generar un archivo de guardado personalizado para Pokémon Picross, el cual puede ser usado en conjunto con universal-otherapp para instalar custom firmware. - -Esta ruta requiere la aplicación Pokémon Picross (Gratis en la eShop), y por lo tanto requiere acceso a la eShop y una 3DS con una región de USA, EUR o JPN. - -Continúa a [Instalar Boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Instalar boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) Éste método que emplea Seedminer para mayor acceso utiliza tu archivo `movable.sed` para tomar ventaja de exploits en el firmware SAFE_MODE presente en todas las consolas 3DS. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continúa a [Instalar boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/fi_FI/bannerbomb3-fredtool-(twn).txt b/_pages/fi_FI/bannerbomb3-fredtool-(twn).txt index 0b5f9ced37..1f4568d672 100644 --- a/_pages/fi_FI/bannerbomb3-fredtool-(twn).txt +++ b/_pages/fi_FI/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/fi_FI/bannerbomb3.txt b/_pages/fi_FI/bannerbomb3.txt index 063d250ab9..9a71b4c758 100644 --- a/_pages/fi_FI/bannerbomb3.txt +++ b/_pages/fi_FI/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### Tarpeet diff --git a/_pages/fi_FI/faq.txt b/_pages/fi_FI/faq.txt index 6519e4193e..a59a24409f 100644 --- a/_pages/fi_FI/faq.txt +++ b/_pages/fi_FI/faq.txt @@ -4,11 +4,12 @@ title: "UKK" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "UKK" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**V:** Kyllä! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**V:** Kyllä! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/fi_FI/get-started.txt b/_pages/fi_FI/get-started.txt index 786fa7bea1..b2ae3c0013 100644 --- a/_pages/fi_FI/get-started.txt +++ b/_pages/fi_FI/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/fi_FI/home.txt b/_pages/fi_FI/home.txt index 10e0ca080c..ddb153cd2d 100644 --- a/_pages/fi_FI/home.txt +++ b/_pages/fi_FI/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Perusteellinen opas 3DS:n mukautettuun laiteohjelmistoon,
vakio-ohjelmistosta boot9strapiin.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Lue huolellisesti kaikki johdantosivut (mukaan lukien tämä!) ennen aloittamista. {: .notice--info} diff --git a/_pages/fi_FI/installing-boot9strap-(fredtool).txt b/_pages/fi_FI/installing-boot9strap-(fredtool).txt index 93325abbce..a2d7cd8c98 100644 --- a/_pages/fi_FI/installing-boot9strap-(fredtool).txt +++ b/_pages/fi_FI/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Tärkeää tietoa +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. Tämä menetelmä käyttää FIRM-osioiden salaamatonta muotoa (known-plaintext, selitetty [täällä](https://www.3dbrew.org/wiki/3DS_System_Flaws)) hyödyntävää haavoittuvuutta. diff --git a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt index a60b54c371..acc619682a 100644 --- a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt +++ b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Tärkeää tietoa +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/fi_FI/installing-boot9strap-(pichaxx).txt b/_pages/fi_FI/installing-boot9strap-(pichaxx).txt index 9df9376d80..1eff5dc446 100644 --- a/_pages/fi_FI/installing-boot9strap-(pichaxx).txt +++ b/_pages/fi_FI/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Tärkeää tietoa +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/fi_FI/seedminer.txt b/_pages/fi_FI/seedminer.txt index 05b25a7b04..3ca3a676c0 100644 --- a/_pages/fi_FI/seedminer.txt +++ b/_pages/fi_FI/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt b/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt index 997e33b691..04c346084c 100644 --- a/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/fr_FR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/fr_FR/bannerbomb3.txt b/_pages/fr_FR/bannerbomb3.txt index cca6925e42..a6d5cffd23 100644 --- a/_pages/fr_FR/bannerbomb3.txt +++ b/_pages/fr_FR/bannerbomb3.txt @@ -13,7 +13,7 @@ Pour accomplir cela, nous utilisons la clé de chiffrement de votre console (mov Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée indiquées par les lettres U, E, J ou K après le numéro de version de la console. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### Ce dont vous avez besoin diff --git a/_pages/fr_FR/faq.txt b/_pages/fr_FR/faq.txt index cf6b9d467c..7a2ad20a57 100644 --- a/_pages/fr_FR/faq.txt +++ b/_pages/fr_FR/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Voici ce que vous devriez savoir : +**3DS firmware 11.16.0 was recently released**. Voici ce que vous devriez savoir : -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- Si votre appareil est sur une version de Luma plus ancienne, vous devriez [mettre à jour Luma](restoring-updating-cfw) avant de mettre à jour votre appareil vers la 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**R :** Oui ! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**R :** Oui ! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/fr_FR/get-started.txt b/_pages/fr_FR/get-started.txt index 91c5c513c8..0011fba74d 100644 --- a/_pages/fr_FR/get-started.txt +++ b/_pages/fr_FR/get-started.txt @@ -19,12 +19,12 @@ Si vous voyez un menu inhabituel, STOP - vous avez déjà un custom firmware ! C #### Section II - Vérification de la version du logiciel système 1. Ouvrez l'application Paramètres de la console -1. La version de votre logiciel système sera affichée en bas à droite de l'écran supérieur (par ex. "Ver. 11.15.0-47U") +1. La version de votre logiciel système sera affichée en bas à droite de l'écran supérieur (par ex. "Ver. 11.16.0-48U") #### Section III – Sélectionner une méthode Utilisez le tableau des versions ci-dessous pour sélectionner une méthode. Quelques points à noter : - + Le tableau des versions ci-dessous est *inclusif*. Par exemple, "de 11.4.0 à 11.14.0" inclut 11.4.0, 11.14.0 et toutes les versions intermédiaires. + + Le tableau des versions ci-dessous est *inclusif*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Les versions logicielles ne fonctionnent pas de la même manière que les décimales. Les versions 11.10.0 et supérieures sont plus récentes que 11.3.0 et ne sont donc pas compatibles avec Soundhax. + Le chiffre et la lettre après la version du logiciel système ne sont pas importants. + Peu importe la méthode que vous suivez, le résultat final est le même (configuration du custom firmware boot9strap + Luma3DS sur la dernière version du logiciel système). @@ -42,11 +42,11 @@ Utilisez le tableau des versions ci-dessous pour sélectionner une méthode. Que - 11.15.0 (dernière version) + 11.16.0 (latest version) Seedminer - 11.4.0 à 11.14.0 + 11.4.0 to 11.15.0 Mettez à jour votre 3DS vers la dernière version depuis les Paramètres de la console @@ -63,6 +63,5 @@ Si possible, vous devriez suivre l'une des méthodes logicielles répertoriées Sinon, des méthodes qui fonctionnent sur toutes les versions sont disponibles, mais nécessitent du matériel supplémentaire : -1. [Installer boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requiert une 3DS avec un custom firmware et une copie de Mario Kart 7 1. [ntrboot](ntrboot) - nécessite un linker DS compatible 1. [Installation de boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - nécessite de faire de la soudure diff --git a/_pages/fr_FR/home.txt b/_pages/fr_FR/home.txt index 51f1356081..e44dcfe2c5 100644 --- a/_pages/fr_FR/home.txt +++ b/_pages/fr_FR/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Un guide complet pour le custom firmware de 3DS,
depuis le firmware original vers boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Voici ce que vous devriez savoir : + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Lisez attentivement toutes les pages d'introduction (y compris celle-ci !) avant de continuer. {: .notice--info} diff --git a/_pages/fr_FR/installing-boot9strap-(fredtool).txt b/_pages/fr_FR/installing-boot9strap-(fredtool).txt index 25f7450e78..c8921e74ce 100644 --- a/_pages/fr_FR/installing-boot9strap-(fredtool).txt +++ b/_pages/fr_FR/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installation de Boot9strap (Fredtool)" ### Lecture requise +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Cette méthode d'utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier `movable.sed` pour déchiffrer n'importe quel titre DSiWare afin d'injecter un titre DSiWare exploitable dans l'application Connexions Nintendo DS. Cela nécessite d'avoir une sauvegarde d'un DSiWare, par exemple à partir de BannerBomb ou de l'outil DSiWare Dumper. Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui est décrit [ici](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt index b99822015b..1e468c3a6e 100644 --- a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installation de boot9strap (kartdlphax)" ### Lecture requise +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax est un exploit pour le mode Téléchargement de Mario Kart 7. Il peut être utilisé avec universal-otherapp pour installer un firmware custom sur les consoles cibles. Pour suivre ces instructions, vous aurez besoin de ceci : diff --git a/_pages/fr_FR/installing-boot9strap-(pichaxx).txt b/_pages/fr_FR/installing-boot9strap-(pichaxx).txt index 2a785645ef..940c31cc3b 100644 --- a/_pages/fr_FR/installing-boot9strap-(pichaxx).txt +++ b/_pages/fr_FR/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installation de boot9strap (PicHaxx)" ### Lecture requise +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour écrire un fichier de sauvegarde modifié pour Pokémon Picross, qui peut ensuite être utilisé avec universal-otherapp pour exécuter SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/fr_FR/installing-boot9strap-(usm).txt b/_pages/fr_FR/installing-boot9strap-(usm).txt index 3a1485e9ed..925b9f1722 100644 --- a/_pages/fr_FR/installing-boot9strap-(usm).txt +++ b/_pages/fr_FR/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ Une fois le profil WiFi injecté, nous utiliserons SAFE_MODE, qui est une foncti Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée indiquées par les lettres U, E, J ou K après le numéro de version de la console. -If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). Pour obtenir de l'aide, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide en anglais. +If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. {: .notice--warning} ## Ce dont vous avez besoin diff --git a/_pages/fr_FR/seedminer.txt b/_pages/fr_FR/seedminer.txt index d86135bdd9..a6e6899519 100644 --- a/_pages/fr_FR/seedminer.txt +++ b/_pages/fr_FR/seedminer.txt @@ -59,31 +59,20 @@ ___ ### Prochaînes étapes -Une fois que vous avez la clé de chiffrement de votre console (`movable.sed`), vous l'utiliserez en conjonction avec d'autres exploits pour installer un custom firmware sur votre 3DS. Sélectionnez un exploit ci-dessous. +Une fois que vous avez la clé de chiffrement de votre console (`movable.sed`), vous l'utiliserez en conjonction avec d'autres exploits pour installer un custom firmware sur votre 3DS. -#### PicHaxx + universal-otherapp (Recommandé) - -Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour écrire un fichier de sauvegarde modifié pour Pokémon Picross, qui peut ensuite être utilisé avec universal-otherapp pour installer le custom firmware. - -Cette méthode requiert l'application Pokémon Picross (gratuit sur eShop), et nécessite donc un accès à l'eShop et une 3DS avec une région USA, EUR, ou JPN. - -Continuer vers [Installation de boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installation de boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour tirer parti d'exploits du firmware SAFE_MODE présent sur toutes les consoles 3DS. -Cette route n'est recommandée que si vous êtes, pour une raison quelconque, incapable d'utiliser la méthode PicHaxx + universal-otherapp, si vous n'avez pas d'accès à l'eShop ou vous utilisez une 3DS coréenne. - Continuer vers [Installation de boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ -#### Uniquement pour les consoles Taïwanaises +#### Taiwan consoles only -Si vous avez une console taïwanaise (indiqué avec un T à la fin de la version système, tel que 11.15.0-39**T**), vous devez utiliser cette méthode. **Si votre console n'est pas de cette région, n'utilisez pas cette méthode.** +If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.** -Continuer vers [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) +Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) {: .notice--warning} \ No newline at end of file diff --git a/_pages/he_IL/bannerbomb3-fredtool-(twn).txt b/_pages/he_IL/bannerbomb3-fredtool-(twn).txt index 45aa82f2a5..398fc3f26c 100644 --- a/_pages/he_IL/bannerbomb3-fredtool-(twn).txt +++ b/_pages/he_IL/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/he_IL/bannerbomb3.txt b/_pages/he_IL/bannerbomb3.txt index cd29f5df48..f8a060d7fc 100644 --- a/_pages/he_IL/bannerbomb3.txt +++ b/_pages/he_IL/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/he_IL/faq.txt b/_pages/he_IL/faq.txt index 9617118b9f..b120e2f5ea 100644 --- a/_pages/he_IL/faq.txt +++ b/_pages/he_IL/faq.txt @@ -4,11 +4,12 @@ title: "שאלות ותשובות" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "שאלות ותשובות" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**תשובה:** כן! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**תשובה:** כן! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/he_IL/get-started.txt b/_pages/he_IL/get-started.txt index f4991c2593..e4fe0ac14c 100644 --- a/_pages/he_IL/get-started.txt +++ b/_pages/he_IL/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/he_IL/home.txt b/_pages/he_IL/home.txt index edd6edb4e5..03c03a0ce8 100644 --- a/_pages/he_IL/home.txt +++ b/_pages/he_IL/home.txt @@ -9,6 +9,17 @@ header: excerpt: "מדריך שלם לפריצת 3DS,
מהחנות עד ל boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ תקראו ביסודיות את כל הדפים המקדימים (כולל את זה!) לפני שאתם ממשיכים. {: .notice--info} diff --git a/_pages/he_IL/installing-boot9strap-(fredtool).txt b/_pages/he_IL/installing-boot9strap-(fredtool).txt index 55347c5df7..54e49af497 100644 --- a/_pages/he_IL/installing-boot9strap-(fredtool).txt +++ b/_pages/he_IL/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### קריאה דרושה +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. זה כרגע יישום עובד של הפירצה "PLAINTEXT ידוע למחיצת הFIRM" עם הסבר [כאן](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt index 659dd00d9d..91950033b3 100644 --- a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt +++ b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### קריאה דרושה +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/he_IL/installing-boot9strap-(pichaxx).txt b/_pages/he_IL/installing-boot9strap-(pichaxx).txt index 9ad4d35c02..6e93f592f3 100644 --- a/_pages/he_IL/installing-boot9strap-(pichaxx).txt +++ b/_pages/he_IL/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### קריאה דרושה +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/he_IL/seedminer.txt b/_pages/he_IL/seedminer.txt index 667664f728..8e878e9354 100644 --- a/_pages/he_IL/seedminer.txt +++ b/_pages/he_IL/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt b/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/hr_HR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/hr_HR/bannerbomb3.txt b/_pages/hr_HR/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/hr_HR/bannerbomb3.txt +++ b/_pages/hr_HR/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/hr_HR/faq.txt b/_pages/hr_HR/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/hr_HR/faq.txt +++ b/_pages/hr_HR/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/hr_HR/get-started.txt b/_pages/hr_HR/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/hr_HR/get-started.txt +++ b/_pages/hr_HR/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/hr_HR/home.txt b/_pages/hr_HR/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/hr_HR/home.txt +++ b/_pages/hr_HR/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/hr_HR/installing-boot9strap-(fredtool).txt b/_pages/hr_HR/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/hr_HR/installing-boot9strap-(fredtool).txt +++ b/_pages/hr_HR/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/hr_HR/installing-boot9strap-(pichaxx).txt b/_pages/hr_HR/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/hr_HR/installing-boot9strap-(pichaxx).txt +++ b/_pages/hr_HR/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/hr_HR/seedminer.txt b/_pages/hr_HR/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/hr_HR/seedminer.txt +++ b/_pages/hr_HR/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt b/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt index 16fd921c41..da32860e4e 100644 --- a/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt +++ b/_pages/hu_HU/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Hogy ezt elérjük, szükségünk van a rendszer titkosítási kulcsára (movabl Ha van egy DSiWare mentésed, egy exploitolható DSiWare cím injektálható a DS Download Play-be, amivel telepíthető az egyéni firmware. -Ezek a lépések CSAK tajvani konzolokhoz jók (amit T betű jelez a rendszer verzió mögött, mint például 11.15.0-39**T**)! Ha a konzolod más régióból van [válassz egy másik metódust](seedminer#next-steps). +Ezek a lépések CSAK tajvani konzolokhoz jók (amit T betű jelez a rendszer verzió mögött, mint például 11.16.0-39**T**)! Ha a konzolod más régióból van [válassz egy másik metódust](seedminer#next-steps). {: .notice--warning} ### Amire szükséged lesz diff --git a/_pages/hu_HU/bannerbomb3.txt b/_pages/hu_HU/bannerbomb3.txt index 258f4d5736..3eb1096026 100644 --- a/_pages/hu_HU/bannerbomb3.txt +++ b/_pages/hu_HU/bannerbomb3.txt @@ -13,7 +13,7 @@ Hogy ezt elérjük, szükségünk van a rendszer titkosítási kulcsára (movabl Az utasítások az Amerikai, Európai, Japán és Koreai régiójú konzolokon működnek, amik a rendszer verzió mögött egy U, E, J vagy K betű jelöl. Ha tajvani konzolod van (amit T betű jelez a rendszer verzió mögött), akkor kövesd [ezt az oldalt](bannerbomb3-fredtool-(twn)) helyette. -{: ..notice--warning} +{: .notice--warning} ### Amire szükséged lesz diff --git a/_pages/hu_HU/faq.txt b/_pages/hu_HU/faq.txt index 38f1fa3868..a8fb1c0f8b 100644 --- a/_pages/hu_HU/faq.txt +++ b/_pages/hu_HU/faq.txt @@ -4,11 +4,12 @@ title: "GYIK" {% include toc title="Tartalomjegyzék" %} {% capture notice-6 %} -**A legutolsó 3DS firmware a 11.15.0**. Amit érdemes tudnod: +**3DS firmware 11.16.0 nemrég került kiadásra**. Amit érdemes tudnod: -- Ha az eszközöd *Luma 10.2.1* -et vagy újabbat futtat, *100% biztonságos* a frissítés. -- Ha az eszközöd régebbi Luma verziót futtat, [frissítened kell a Luma-t](restoring-updating-cfw) mielőtt az eszközöd 11.15.0 verzióra frissíted. -- Nem ismert, hogy homebrew címeket befolyásolna-e ez a frissítés. Ugyanúgy működnek, ahogy 11.14.0 és korábbi verziókon. +- Ha az eszközöd *Luma 11.0* -t futtat, *100% biztonságos* a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával az eszközöd elindítása közben. +- Ha az eszközöd régebbi Luma verziót futtat, [frissítened kell a Luma-t](checking-for-cfw) mielőtt az eszközöd 11.16.0 verzióra frissíted. +- A [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (ami PLG pluginek futtatásához és vezeték nélküli streameléshez használt) frissítendő, hogy működjon 11.16.0 verzión. Ha használod, akkor várnod kell a frissítésére, mielőtt felfrissítenéd az eszközöd 11.16.0 verzióra. +- Ha az eszközöd nem rendelkezik egyedi firmware-rel, telepítheted ezt a verziót bármilyen további hardver nélkül, de az ajánlott metódus megváltozik. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "GYIK" ## Telepítés előtti GYIK #### **K:** *A legújabb verziójú rendszeren vagyok. Hackelhető a rendszerem külső hardver nélkül?* -**V:** Igen! Az utolsó firmware (11.15.0) rendelkezik ingyenes metódussal a CFW beszerzéséhez, amit [Seedminer](seedminer)-nek hívnak. +**V:** Igen! Az utolsó firmware (11.16.0) rendelkezik ingyenes metódussal a CFW beszerzéséhez, amit [Seedminer](seedminer)-nek hívnak. #### **K:** *Milyen eszközökkel kompatibilis ez az útmutató?* **V:** A lépések azonosak minden kereskedelmi 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, és New 2DS XL eszközhöz. Ha a rendszered verziója "0.0.0-0", akkor fejlesztői rendszered van. diff --git a/_pages/hu_HU/get-started.txt b/_pages/hu_HU/get-started.txt index d933a8267b..6baaa49ccb 100644 --- a/_pages/hu_HU/get-started.txt +++ b/_pages/hu_HU/get-started.txt @@ -19,12 +19,12 @@ Ha egy szokatlan menüt látsz ÁLLJ MEG - már vagy egyedi firmwared! Folytasd #### II. rész - Rendszer verzió ellenőrzés 1. Indítsd el a System Settings alkalmazást -1. A rendszer verziód ki lesz írva a felső képernyő jobb alsó sarkában (pl.: "Ver. 11.15.0-47U") +1. A rendszer verziód ki lesz írva a felső képernyő jobb alsó sarkában (pl.: "Ver. 11.16.0-48U") #### III. rész - Metódus választása Használd a lenti verzió táblát egy metódus kiválasztásához. Néhány fontos megjegyzés: - + A lenti verzió tábla *inkluzív*. Például a "11.4.0-tól 11.14.0-ig" magába foglalja a 11.4.0, 11.14.0, és az összes köztes verziót is. + + A lenti verzió tábla *inkluzív*. Például a "11.4.0-tól 11.15.0-ig" magába foglalja a 11.4.0, 11.15.0, és az összes köztes verziót is. + Szoftver verziók nem úgy működnek mint a tizedes jegyek. 11.10.0 és későbbi verziók újjabbak mint 11.3.0, és ezért nem kompatibilisak a Soundhax-el. + A szám és betű a rendszer verzió mögött nem fontos. + Nem számít melyik metódust követed, a végeremény ugyanaz (boot9strap+Luma3DS egyedi firmware telepítés a legutolsó firmware-re). @@ -42,11 +42,11 @@ Használd a lenti verzió táblát egy metódus kiválasztásához. Néhány fon - 11.15.0 (legutolsó verzió) + 11.16.0 (legutolsó verzió) Seedminer - 11.4.0-tól 11.14.0-ig + 11.4.0-tól 11.15.0-ig Frissítsd a 3DS-ed a legutolsó verzióra a System Settings-en keresztül @@ -63,6 +63,5 @@ Ha lehetséges, kövesd a fent listázott szoftver metódusok egyikét. Egyéb esetekben más, az összes verziónál használható metódus elérhető, de további hardvert igényelnek: -1. [Boot9strap telepítése (kartdlphax)](installing-boot9strap-(kartdlphax)) - egy 3DS-t igényel egyedi firmware-rel és egy Mario Kart 7 másolatot 1. [ntrboot](ntrboot) - kompatibilis DS flashcard-ra van szükség hozzá 1. [Boot9strap telepítése (Hardmod)](installing-boot9strap-(hardmod)) - forrasztást igényel diff --git a/_pages/hu_HU/home.txt b/_pages/hu_HU/home.txt index 0f8b0402a1..709108433a 100644 --- a/_pages/hu_HU/home.txt +++ b/_pages/hu_HU/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Egy teljes útmutató egyedi 3DS firmware-hez,
gyári állapottól boot9strap-ig.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 nemrég került kiadásra**. Amit érdemes tudnod: + +- Ha az eszközöd *Luma 11.0* -t futtat, *100% biztonságos* a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával az eszközöd elindítása közben. +- Ha az eszközöd régebbi Luma verziót futtat, [frissítened kell a Luma-t](checking-for-cfw) mielőtt az eszközöd 11.16.0 verzióra frissíted. +- A [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (ami PLG pluginek futtatásához és vezeték nélküli streameléshez használt) frissítendő, hogy működjon 11.16.0 verzión. Ha használod, akkor várnod kell a frissítésére, mielőtt felfrissítenéd az eszközöd 11.16.0 verzióra. +- Ha az eszközöd nem rendelkezik egyedi firmware-rel, telepítheted ezt a verziót bármilyen további hardver nélkül, de az ajánlott metódus megváltozik. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Alaposan olvasd végig az összes bevezető oldalt (beleértve ezt is) mielőtt bármibe belekezdenél. {: .notice--info} diff --git a/_pages/hu_HU/installing-boot9strap-(fredtool).txt b/_pages/hu_HU/installing-boot9strap-(fredtool).txt index a152228868..4dc8ab156f 100644 --- a/_pages/hu_HU/installing-boot9strap-(fredtool).txt +++ b/_pages/hu_HU/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Boot9strap telepítése (Fredtool)" ### Fontos tudnivalók +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Ez a metódusa a Seedminer használatának a további exploitoláshoz használja a `movable.sed` fájlod, hogy dekriptáljon egy DSiWare címet, azzal az céllal, hogy beinjektáljon egy exploitolható DSiWare címet a DS Download Play alkalmazásba. Ez igényli, hogy rendelkezzél egy DSiWare mentéssel, például a BannerBomb-ból vagy a DSiWare Dumper eszközből. Ez egy jelenleg működő megvalósítása a "FIRM partitions known-plaintext" néven ismert exploitnak, amiről részletesebben olvashatsz [itt](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt index e6a507c5ed..b6892aae4a 100644 --- a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt +++ b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Boot9strap telepítése (kartdlphax)" ### Fontos tudnivalók +A lépések ezen az oldalon nem fognak működni, ha a legutolsó (11.16.0) firmware-en vagy. Ha közvetlenül lettél erre az oldalra linkelve, [térj vissza a Kezdeti lépésekhez](get-started) vagy csatlakozz a [Nintendo Homebrew csatornához a Discord-on](https://discord.gg/MWxPgEp) és kérj angolul segítséget. +{: .notice--warning} + kartdlphax a Mario Kart 7 Download Play módjának egy exploitja. Az universal-otherapp-pal használhat egyedi firmware telepítésére a cél eszközön. Ahhoz, hogy követhesd ezeket a lépéseket, a következőkre van szükséged: diff --git a/_pages/hu_HU/installing-boot9strap-(pichaxx).txt b/_pages/hu_HU/installing-boot9strap-(pichaxx).txt index e756b29720..5190da2b28 100644 --- a/_pages/hu_HU/installing-boot9strap-(pichaxx).txt +++ b/_pages/hu_HU/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Boot9strap telepítése (PicHaxx)" ### Fontos tudnivalók +A lépések ezen az oldalon nem fognak működni, ha a legutolsó (11.16.0) firmware-en vagy. Ha közvetlenül lettél erre az oldalra linkelve, [térj vissza a Seedminer-hez](Seedminer) vagy csatlakozz a [Nintendo Homebrew csatornához a Discord-on](https://discord.gg/MWxPgEp) és kérj angolul segítséget. +{: .notice--warning} + Ez a metódusa Seedminer használatának további exploitolás céljából használja a `movable.sed` fájlt, hogy egy egyedi Pokémon Picross mentés fájlt írjon, amit már használhat az universal-otherapp a SafeB9Installer futtatására. Ennek a folyamatnak a során a Pokémon Picross mentése felülírásra kerül, ha rendelkezel ilyennel. Ha szeretnéd megőrizni a Pokémon Picross játék adatod, készítened kell egy mentést a `00000001.sav` fájlról, mielőtt felülírnád. diff --git a/_pages/hu_HU/seedminer.txt b/_pages/hu_HU/seedminer.txt index 394cd4fc6f..0f1d2010cf 100644 --- a/_pages/hu_HU/seedminer.txt +++ b/_pages/hu_HU/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Következő lépések -Ha meg van az eszközöd titkosítási kulcsa (`movable.sed`) más exploitokkal együtt fogod használni az egyedi firmware telepítéséhez. Válassz egy exploitot alább. +Ha meg van az eszközöd titkosítási kulcsa (`movable.sed`) más exploitokkal együtt fogod használni az egyedi firmware telepítéséhez. -#### PicHaxx + universal-otherapp (Ajánlott) - -Ez a metódusa Seedminer használatának további exploitolás céljából használja a `movable.sed` fájlod, hogy egy egyedi Pokémon Picross mentés fájlt írjon, amit már használható az universal-otherapp-pal custom firmwre telepítésére. - -Ehhez a módhoz szükséged van Pokémon Picross alkalmazásra (ingyenes az eShop-on), így eShop hozzáférés és egy USA, EUR, vagy JPN régiós 3DS szükséges hozzá. - -Folytatás a [Boot9strap telepítése (PicHaxx)](installing-boot9strap-(pichaxx)) lépéssel -{: .notice--primary} - -#### Boot9strap telepítése (unSAFE_MODE) +#### unSAFE_MODE (Ajánlott) Ez a módszere a Seedminer használatának további exploitoláshoz használja a `movable.sed` fájlod, hogy kihasználja a SAFE_MODE firmware exploitjait, amelyek megtalálhatók minden 3DS egységen. -Ez a mód csak akkor ajánlott, ha nem tudok követni a PicHaxx + universal-otherapp lépéseit, mint például az eShop hozzáférés hiánya vagy koreai 3DS használata. - Tovább a [Boot9strap telepítésére (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/id_ID/bannerbomb3-fredtool-(twn).txt b/_pages/id_ID/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/id_ID/bannerbomb3-fredtool-(twn).txt +++ b/_pages/id_ID/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/id_ID/bannerbomb3.txt b/_pages/id_ID/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/id_ID/bannerbomb3.txt +++ b/_pages/id_ID/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/id_ID/faq.txt b/_pages/id_ID/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/id_ID/faq.txt +++ b/_pages/id_ID/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/id_ID/get-started.txt b/_pages/id_ID/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/id_ID/get-started.txt +++ b/_pages/id_ID/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/id_ID/home.txt b/_pages/id_ID/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/id_ID/home.txt +++ b/_pages/id_ID/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/id_ID/installing-boot9strap-(fredtool).txt b/_pages/id_ID/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/id_ID/installing-boot9strap-(fredtool).txt +++ b/_pages/id_ID/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt +++ b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/id_ID/installing-boot9strap-(pichaxx).txt b/_pages/id_ID/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/id_ID/installing-boot9strap-(pichaxx).txt +++ b/_pages/id_ID/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/id_ID/seedminer.txt b/_pages/id_ID/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/id_ID/seedminer.txt +++ b/_pages/id_ID/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/it_IT/bannerbomb3-fredtool-(twn).txt b/_pages/it_IT/bannerbomb3-fredtool-(twn).txt index 2fa109be42..fde4607bbe 100644 --- a/_pages/it_IT/bannerbomb3-fredtool-(twn).txt +++ b/_pages/it_IT/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Per realizzare l'obiettivo, utilizziamo la chiave di cifratura della tua console Una volta ottenuto un backup DSiWare, si può initiettare nella "Modalità download" un titolo DSiWare utilizzabile per installare un custom firmware. -Queste istruzioni sono solo per le console taiwanesi (come indicato da una T alla fine della versione di sistema, ad esempio 11.15.0-39T)! Se la tua console proviene da qualsiasi altra regione, [scegli un altro metodo](seedminer#next-steps). +Queste istruzioni sono SOLO per le console taiwanesi (indicate da una T alla fine della versione di sistema, ad esempio 11.16.0-39T)! Se la tua console proviene da qualsiasi altra regione, [scegli un altro metodo](seedminer#next-steps). {: .notice--warning} ### Cosa serve diff --git a/_pages/it_IT/bannerbomb3.txt b/_pages/it_IT/bannerbomb3.txt index 8212b3fb1c..26f3a72610 100644 --- a/_pages/it_IT/bannerbomb3.txt +++ b/_pages/it_IT/bannerbomb3.txt @@ -13,7 +13,7 @@ Per realizzare l'obiettivo, utilizziamo la chiave di cifratura della tua console Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo. Se hai una console taiwanese (indicata da una T dopo la versione di sistema), segui invece [questa pagina](bannerbomb3-fredtool-(twn)). -{: ..notice--warning} +{: .notice--warning} ### Cosa serve diff --git a/_pages/it_IT/faq.txt b/_pages/it_IT/faq.txt index 173abb1089..d7c6c982b7 100644 --- a/_pages/it_IT/faq.txt +++ b/_pages/it_IT/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Indice"%} {% capture notice-6 %} -**L'ultima versione del software 3DS è 11.15.0**. Ecco cosa dovresti sapere: +**Recentemente è stata rilasciata la versione del software 3DS 11.16.0**. Ecco cosa dovresti sapere: -- Se la tua console sta eseguendo *Luma 10.2.1 o superiore*, è *al 100% sicuro* eseguire l'aggiornamento. -- Se la tua console ha una versione precedente di Luma, dovresti [aggiornare Luma](restoring-updating-cfw) prima di aggiornare la tua console alla versione 11.15.0. -- Nessun homebrew sembra essere stato influenzato da questo aggiornamento. Tutti funzioneranno come nella versione 11.14.0 o inferiore. +- Se la tua console sta eseguendo *Luma 11.0*, è *al 100% sicuro* eseguire l'aggiornamento. Puoi controllare la versione di Luma tenendo premuto (Select) durante l'avvio della console. +- Se la tua console ha una versione precedente di Luma, dovresti [aggiornare Luma](checking-for-cfw) prima di aggiornare la tua console alla versione 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (utilizzato per eseguire plugin PLG e streaming wireless) dovrà essere aggiornato prima che possa funzionare su 11.16.0. Se lo utilizzi, è meglio che aspetti il suo aggiornamento prima di aggiornare la console a 11.16.0. +- Se la tua console non ha ancora un custom firmware, puoi comunque installarlo gratuitamente su questa versione senza hardware aggiuntivo, ma il metodo consigliato è stato cambiato. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## FAQ Pre-Installazione #### **D:** *Ho installato l'ultima versione di sistema. La mia console è hackabile senza alcun dispositivo esterno?* -**R:** Sì! La versione del software più recente (11.15.0) ha un metodo gratuito per ottenere un CFW chiamato [Seedminer](seedminer). +**R:** Sì! La versione del software più recente (11.16.0) ha un metodo gratuito per ottenere un CFW chiamato [Seedminer](seedminer). #### **D:** *Con quali console questa guida è compatibile?* **R:** Le istruzioni sono identiche per tutte le console 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, e New 2DS XL. Se il nome della tua versione di sistema è "0.0.0-0", potresti avere una console per sviluppatori. diff --git a/_pages/it_IT/get-started.txt b/_pages/it_IT/get-started.txt index 28047a42b4..0424fb9b1e 100644 --- a/_pages/it_IT/get-started.txt +++ b/_pages/it_IT/get-started.txt @@ -19,12 +19,12 @@ Se vedi un menu insolito, FERMATI - hai già un custom firmware! Prosegui da [qu #### Sezione II - Controllo della Versione di Sistema 1. Avvia l'applicazione Impostazioni della console -1. La versione di sistema corrente verrà visualizzata nell'angolo inferiore destro dello schermo superiore (ad es. "Ver. 11.15.0-47U") +1. La versione di sistema corrente verrà visualizzata nell'angolo inferiore destro dello schermo superiore (ad es. "Ver. 11.16.0-48U") #### Sezione III - Scegli un Metodo Usa la tabella delle versioni qui sotto per scegliere un metodo. Alcune cose da tenere in considerazione: - + La tabella delle versioni sottostanti è *inclusiva*. Ad esempio, "da 11.4.0 a 11.14.0" include 11.4.0, 11.14.0, e tutte le versioni nel mezzo. + + La tabella delle versioni sottostanti è *inclusiva*. Ad esempio, "da 11.4.0 a 11.15.0" include 11.4.0, 11.15.0, e tutte le versioni nel mezzo. + Le versioni dei software non seguono le regole dei numeri decimali. Versioni uguali o superiori a 11.10.0 sono più recenti della versione 11.3.0 e quindi non compatibili con Soundhax. + Il numero e la lettera dopo la versione di sistema non sono importanti. + Non importa il metodo che segui, il risultato finale è lo stesso (boot9strap+Luma3DS custom firmware con versione di sistema più recente). @@ -42,11 +42,11 @@ Usa la tabella delle versioni qui sotto per scegliere un metodo. Alcune cose da - 11.15.0 (più recente) + 11.16.0 (più recente) Seedminer - Da 11.4.0 a 11.14.0 + Da 11.4.0 a 11.15.0 Aggiorna il tuo 3DS alla versione più recente tramite il menu Impostazioni della console @@ -63,6 +63,5 @@ Se possibile, dovresti seguire uno dei metodi indicati sopra. Altrimenti, ci sono metodi che funzionano su tutte le versioni, ma richiedono dell'hardware aggiuntivo: -1. [Installazione di boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - richiede un 3DS con custom firmware e una copia di Mario Kart 7 1. [ntrboot](ntrboot) - richiede una flashcart DS compatibile 1. [Installazione di boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - richiede saldatura diff --git a/_pages/it_IT/home.txt b/_pages/it_IT/home.txt index bd18f31b36..209407616b 100644 --- a/_pages/it_IT/home.txt +++ b/_pages/it_IT/home.txt @@ -9,6 +9,17 @@ header: excerpt: "La guida omnicomprensiva per installare
un custom firmware su 3DS, da zero a boot9strap.
" --- +{% capture notice-6 %} +**Recentemente è stata rilasciata la versione del software 3DS 11.16.0**. Ecco cosa dovresti sapere: + +- Se la tua console sta eseguendo *Luma 11.0*, è *al 100% sicuro* eseguire l'aggiornamento. Puoi controllare la versione di Luma tenendo premuto (Select) durante l'avvio della console. +- Se la tua console ha una versione precedente di Luma, dovresti [aggiornare Luma](checking-for-cfw) prima di aggiornare la tua console alla versione 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (utilizzato per eseguire plugin PLG e streaming wireless) dovrà essere aggiornato prima che possa funzionare su 11.16.0. Se lo utilizzi, è meglio che aspetti il suo aggiornamento prima di aggiornare la console a 11.16.0. +- Se la tua console non ha ancora un custom firmware, puoi comunque installarlo gratuitamente su questa versione senza hardware aggiuntivo, ma il metodo consigliato è stato cambiato. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Leggi attentamente tutte le pagine introduttive (compresa questa!) prima di continuare. {: .notice--info} diff --git a/_pages/it_IT/installing-boot9strap-(fredtool).txt b/_pages/it_IT/installing-boot9strap-(fredtool).txt index 893807825f..686385012c 100644 --- a/_pages/it_IT/installing-boot9strap-(fredtool).txt +++ b/_pages/it_IT/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installazione di Boot9strap (Fredtool)" ### Lettura necessaria +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Seedminer utilizza il tuo file `movable.sed` per decriptare un qualunque titolo DSiWare per iniettare una particolare applicazione DSiWare nell'applicazione Connessioni Nintendo DS. Questo richiede un backup DSiWare, ad esempio da BannerBomb o da DSiWare Dumper. Questa è un'implementazione funzionante dell'exploit del "testo in chiaro noto nelle partizioni FIRM" spiegato [qui](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt index 7371bf1b86..1a12ca9f55 100644 --- a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt +++ b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installazione di boot9strap (kartdlphax)" ### Lettura necessaria +Le istruzioni di questa pagina non funzionano attualmente con l'ultima versione del software (11.16.0). Se sei stato direttamente indirizzato a questa pagina, [torna a Cominciamo!](get-started) o unisciti a [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) e chiedi, in inglese, una mano. +{: .notice--warning} + kartdlphax è un exploit per la Modalità download di Mario Kart 7. Può essere utilizzato con universal-otherapp per installare un custom firmware sulle console di destinazione. Per seguire queste istruzioni, avrai bisogno di: diff --git a/_pages/it_IT/installing-boot9strap-(pichaxx).txt b/_pages/it_IT/installing-boot9strap-(pichaxx).txt index c90cc44243..fd3c61f2fb 100644 --- a/_pages/it_IT/installing-boot9strap-(pichaxx).txt +++ b/_pages/it_IT/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installazione di boot9strap (PicHaxx)" ### Lettura necessaria +Le istruzioni di questa pagina non funzionano attualmente con l'ultima versione del software (11.16.0). Se sei stato direttamente indirizzato a questa pagina, [torna a Seedminer!](Seedminer) o unisciti a [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) e chiedi, in inglese, una mano. +{: .notice--warning} + Questo metodo usa Seedminer per servirsi ulteriormente del tuo file `movable.sed` e scrivere un file di salvataggio personalizzato per Pokémon Picross, che può essere utilizzato con universal-otherapp per avviare SafeB9SInstaller. Questo processo sovrascriverà il tuo file di salvataggio per Pokémon Picross, se ne hai uno. Se desideri conservare i tuoi dati di gioco Pokémon Picross, dovresti fare un backup del tuo file `00000001.sav` prima di sovrascriverlo. diff --git a/_pages/it_IT/seedminer.txt b/_pages/it_IT/seedminer.txt index 5a918542d0..2c7087f482 100644 --- a/_pages/it_IT/seedminer.txt +++ b/_pages/it_IT/seedminer.txt @@ -59,31 +59,20 @@ ___ ### Passi successivi -Una volta ottenuta la chiave di crittografia della tua console (`movable.sed`), la userai in combinazione ad altri exploit per installare un custom firmware sul tuo 3DS. Seleziona un exploit tra i seguenti. +Una volta ottenuta la chiave di crittografia della tua console (`movable.sed`), la userai in combinazione ad altri exploit per installare un custom firmware sul tuo 3DS. -#### PicHaxx + universal-otherapp (Consigliato) - -Questo metodo usa Seedminer per servirsi ulteriormente del tuo file `movable.sed` e scrivere un file di salvataggio personalizzato per Pokémon Picross, che può essere utilizzato in congiunzione a universal-otherapp per installare un custom firmware. - -È quindi richiesta l'applicazione Pokémon Picross (gratuita sull'eShop), per cui è necessario l'accesso all'eShop e un 3DS di regionalità USA, EUR, o JPN. - -Prosegui con l'[Installazione di boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installazione di boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Consigliato) Seedminer utilizza il tuo file `movable.sed` per sfruttare gli exploit presenti nel firmware SAFE_MODE presente in ogni console 3DS. -Queste istruzioni sono consigliate solo se per qualche motivo non sei in grado di seguire il metodo PicHaxx + universal-otherapp, come l'impossibilità di accedere all'eShop o l'utilizzo di un 3DS coreano. - Prosegui con l'[Installazione di boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ #### Solo per console dal Taiwan -Se hai una console Taiwanese (indicata con una T al termine della versione del sistema, come ad esempio 11.15.0-39**T**), devi seguire queste istruzioni. **Console di altre regioni possono non seguire queste istruzioni.** +Se hai una console Taiwanese (indicata con una T al termine della versione del sistema, come ad esempio 11.15.0-39**T**), devi seguire queste istruzioni. **Console di altre regioni non devono seguire queste istruzioni.** Prosegui con [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) {: .notice--warning} \ No newline at end of file diff --git a/_pages/ja_JP/bannerbomb3-fredtool-(twn).txt b/_pages/ja_JP/bannerbomb3-fredtool-(twn).txt index 1e09ac8c49..2cb84ee630 100644 --- a/_pages/ja_JP/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ja_JP/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/ja_JP/bannerbomb3.txt b/_pages/ja_JP/bannerbomb3.txt index 749f8d76db..68267a17ec 100644 --- a/_pages/ja_JP/bannerbomb3.txt +++ b/_pages/ja_JP/bannerbomb3.txt @@ -13,7 +13,7 @@ DSiWareシステムをダンプするために、本体設定アプリのDSiWare これらのガイドは、システムバージョン末尾にある「U、E、J、K」にあるように、米国、欧州、日本、韓国の端末で機能します。 If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### 必要なもの diff --git a/_pages/ja_JP/faq.txt b/_pages/ja_JP/faq.txt index 1178db6e07..63848bfcca 100644 --- a/_pages/ja_JP/faq.txt +++ b/_pages/ja_JP/faq.txt @@ -4,11 +4,12 @@ title: "よくある質問" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "よくある質問" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** もちろんです！ The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** もちろんです！ The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/ja_JP/get-started.txt b/_pages/ja_JP/get-started.txt index 10378a0043..77084941bf 100644 --- a/_pages/ja_JP/get-started.txt +++ b/_pages/ja_JP/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/ja_JP/home.txt b/_pages/ja_JP/home.txt index 82a88a68d7..7d3c96fcd4 100644 --- a/_pages/ja_JP/home.txt +++ b/_pages/ja_JP/home.txt @@ -9,6 +9,17 @@ header: 抜粋: "3DSのCFW導入ガイド
公式ファームウェアからboot9strapまで。
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ 作業に移る前にガイドの全てのページ(このページも含む) をしっかりと読んでください。 {: .notice--info} diff --git a/_pages/ja_JP/installing-boot9strap-(fredtool).txt b/_pages/ja_JP/installing-boot9strap-(fredtool).txt index 11f3d7cc67..e4994400e8 100644 --- a/_pages/ja_JP/installing-boot9strap-(fredtool).txt +++ b/_pages/ja_JP/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Boot9strap (Fredtool) のインストール" ### 必読事項 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + この方法は、Seedminer による脆弱性を用いたあなたの `movable.sed` ファイルを、DSiWareタイトルを復号化し、脆弱性のあるDSiWareタイトルを「DSソフト用設定」アプリに挿入するために使用します。 ここでは、BannerBomb や the DSiWare Dumper toolなどを利用したDSiWareのバックアップファイルが必要です。 下記の方法はすべて「FIRM partitions known-plaintext」脆弱性の有効な活用です。詳しくは [こちら](https://www.3dbrew.org/wiki/3DS_System_Flaws) 。 diff --git a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt index be9e8687a0..700ea9980b 100644 --- a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### 必読事項 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/ja_JP/installing-boot9strap-(pichaxx).txt b/_pages/ja_JP/installing-boot9strap-(pichaxx).txt index 36d5d448c5..42c44a9a46 100644 --- a/_pages/ja_JP/installing-boot9strap-(pichaxx).txt +++ b/_pages/ja_JP/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### 必読事項 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/ja_JP/installing-boot9strap-(usm).txt b/_pages/ja_JP/installing-boot9strap-(usm).txt index 7df838eb7a..d5bf0241e2 100644 --- a/_pages/ja_JP/installing-boot9strap-(usm).txt +++ b/_pages/ja_JP/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ WiFiプロファイルを入れたら、SAFE_MODEを実行します。これは これらのガイドは、システムバージョン末尾にある「U、E、J、K」にあるように、米国、欧州、日本、韓国の端末で機能します。 -If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). 質問がある場合、[Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)にて英語で質問して下さい。 +If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. {: .notice--warning} ### 必要なもの diff --git a/_pages/ja_JP/seedminer.txt b/_pages/ja_JP/seedminer.txt index 44014c5339..cea53bb48a 100644 --- a/_pages/ja_JP/seedminer.txt +++ b/_pages/ja_JP/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt b/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt index 964de0ed93..0c2e19b2db 100644 --- a/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ title: "BannerBomb3 + Fredtool (타이완)" DSiWare 백업이 있으면, DS 다운로드 플레이에 취약한 DSiWare 타이틀을 주입할 수 있게 되어, 이를 이용해서 커스텀 펌웨어를 설치할 수 있습니다. -이 페이지는 **타이완 콘솔만**에 해당됩니다! (시스템 버전 마지막에 T가 붙음, 예: 11.15.0-39T) 만약 다른 지역의 콘솔을 갖고 계시다면, [다른 방법을 선택해 주세요](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! 만약 다른 지역의 콘솔을 갖고 계시다면, [다른 방법을 선택해 주세요](seedminer#next-steps). {: .notice--warning} ### 준비물 diff --git a/_pages/ko_KR/bannerbomb3.txt b/_pages/ko_KR/bannerbomb3.txt index 0bac59b2d6..9f944c713d 100644 --- a/_pages/ko_KR/bannerbomb3.txt +++ b/_pages/ko_KR/bannerbomb3.txt @@ -13,7 +13,7 @@ title: "BannerBomb3" 이 설명서는 미주, 유럽, 일본, 그리고 한국 지역 기기들 (시스템 버전 다음 글짜가 U, E, J, 아니면 K 인 경우) 와 호환됩니다. 만약 대만 지역 (TWN, 버전 끝에 T 글자가 표시됨)기기를 소유하고 계시다면, [이 페이지](bannerbomb3-fredtool-(twn))를 진행해 주시기 바랍니다. -{: ..notice--warning} +{: .notice--warning} ### 준비물 diff --git a/_pages/ko_KR/faq.txt b/_pages/ko_KR/faq.txt index e7f78fedb2..87eb8f9d29 100644 --- a/_pages/ko_KR/faq.txt +++ b/_pages/ko_KR/faq.txt @@ -4,11 +4,12 @@ title: "자주 묻는 질문" {% include toc title="목차" %} {% capture notice-6 %} -**최신 3DS 펌웨어 버전은 11.15.0입니다**. 다음 사항을 참고해 주세요. +**3DS firmware 11.16.0 was recently released**. 다음 사항을 참고해 주세요. -- 만약 기기가 *Luma 10.2.1 이상일 경우*, 업데이트해도 *100%* 안전합니다. -- 만약 기기가 오래된 Luma를 사용하고 있다면, 기기를 11.15.0으로 업데이트하기 전에 [CFW 복구 / 업데이트](restoring-updating-cfw)를 해야 합니다. -- 이 업데이트로 영향되는 홈브류 타이틀은 없습니다. 11.14.0이나 그 이하 버전처럼 잘 작동할 겁니다. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "자주 묻는 질문" ## 설치 전 자주 묻는 질문 #### **Q:** *지금 최신 버전을 사용하고 있는데, 이걸로도 아무 하드웨어 변형 없이 커펌을 할 수 있나요?* -**A:** 네! 최신 펌웨어 (11.15.0)에서는 [Seedminer](seedminer)를 통해 무료로 CFW를 할 수 있습니다. +**A:** 네! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *이 가이드는 어떤 기기와 호환되나요?* **A:** 이 가이드는 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL과 호환됩니다. 만약 시스템 버전이 "0.0.0-0"으로 표시된다면, 개발자 기기를 가지고 있는 것일 수 있습니다. diff --git a/_pages/ko_KR/get-started.txt b/_pages/ko_KR/get-started.txt index 7e2c15ae8c..9db7f237bb 100644 --- a/_pages/ko_KR/get-started.txt +++ b/_pages/ko_KR/get-started.txt @@ -19,12 +19,12 @@ title: "시작하기" #### 섹션 II - 시스템 버전 확인 1. 본체 설정 에플리케이션을 실행해 주세요 -1. 시스템 버전은 위 화면의 오른쪽 하단에 표시됨니다 (예: "Ver. 11.15.0-47U") +1. 시스템 버전은 위 화면의 오른쪽 하단에 표시됨니다 (예: "Ver. 11.16.0-48U") #### 섹션 III - 방법 선택 다음 테이블을 사용해 방법을 선택해 주세요. 몇 가지 참고: - + 이 테이블은 포함적이며, "11.4.0 에서 11.14.0까지" 는 11.4.0, 11.14.0, 그리고 그 사이에 모든 버전을 의미 합니다. + + 이 테이블은 포함적이며, For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + 소프트웨어 버전은 소수점이 아닙니다. 버전 11.10.0 하고 그 이상은 11.3.0보다 더 최신이며, Soundhax하고 호환되지 않습니다. + 시스템 버전 다음에 번호와 글자는 중요하지 않습니다. + 어떠한 방법을 선택을 해도 결과는 똑같습니다 (최신 시스템 버전하고 boot9strap + Luma3DS 커스텀 펌웨어). @@ -42,11 +42,11 @@ title: "시작하기" - 11.15.0 (최신 버전) + 11.16.0 (latest version) Seedminer - 11.4.0 에서 11.14.0까지 + 11.4.0 to 11.15.0 시스템을 최신 버전으로 업데이트 해 주세요 @@ -63,6 +63,5 @@ title: "시작하기" 모든 버전과 호환되는 방식들이 있지만 추가 하드웨어가 필요할 수 있습니다: -1. [boot9strap 설치 (kartdlphax)](installing-boot9strap-(kartdlphax)) - 커스텀 펌웨어가 이미 설치되어있는 3DS와 마리오 카트 7 필요함 1. [ntrboot](ntrboot) - 호환되는 DS 플래시카드 필요함 1. [boot9strap 설치 (하드모드)](installing-boot9strap-(hardmod)) - 납땜 필요함 diff --git a/_pages/ko_KR/home.txt b/_pages/ko_KR/home.txt index 07b13ebef5..8aeb88d7e6 100644 --- a/_pages/ko_KR/home.txt +++ b/_pages/ko_KR/home.txt @@ -9,6 +9,17 @@ header: excerpt: "3DS 커스텀 펌웨어 완벽 가이드,
순정에서 boot9strap까지.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. 다음 사항을 참고해 주세요. + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ 진행하기 전에 모든 소개 페이지(이 페이지 포함) 를 철저히 읽어 주세요. {: .notice--info} diff --git a/_pages/ko_KR/installing-boot9strap-(fredtool).txt b/_pages/ko_KR/installing-boot9strap-(fredtool).txt index 121be14139..bea269bb8b 100644 --- a/_pages/ko_KR/installing-boot9strap-(fredtool).txt +++ b/_pages/ko_KR/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "boot9strap 설치 (Fredtool)" ### 중요 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + 이 방식은 Seedminer에서 얻은 `movable.sed` 파일을 사용해 어느 DSiWare 타이틀을 해독해 익스플로잇 가능한 DSiWare 타이틀을 DS 소프트웨어용 인터넷 설정에 주입합니다. 이 과정은 DSiWare 백업이 필요합니다. (예: BannerBomb3에서 받은 파일) 이 작업은 [이곳](https://www.3dbrew.org/wiki/3DS_System_Flaws)에 자세히 설명되어 있는 "FIRM partitions known-plaintext" 익스플로잇을 구현한 작업입니다. diff --git a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt index 20636bcda6..4b0badc619 100644 --- a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "boot9strap 설치 (kartdlphax)" ### 중요 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax는 마리오 카트 7의 다운로드 플레이 모드를 사용하는 익스플로잇입니다. universal-otherapp과 같이 사용하면, 커스텀 펌웨어를 설치할 수 있습니다. 이 가이드를 진행하기 위해서는, 다음이 필요합니다: diff --git a/_pages/ko_KR/installing-boot9strap-(pichaxx).txt b/_pages/ko_KR/installing-boot9strap-(pichaxx).txt index 04f0e740f6..5a6b65bad2 100644 --- a/_pages/ko_KR/installing-boot9strap-(pichaxx).txt +++ b/_pages/ko_KR/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "boot9strap 설치 (PicHaxx)" ### 중요 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + 더 깊은 모딩을 위한 Seedminer의 이 사용법은, 포켓몬 피크로스의 커스텀 세이브 파일을 `movable.sed` 파일을 사용해서 작성해, universal-otherapp과 같이 써서 SafeB9SInstaller를 실행하는 방식입니다. 이 과정은, 만약 이미 있다면, Pokémon Picross 저장 데이터를 덮어쓸 것 입니다. 이 저장 데이터를 보존하고 싶으시다면 `00000001.sav` 파일을 백업 해 주시는 것을 권장합니다. diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt index ecd826c58c..efccbea56d 100644 --- a/_pages/ko_KR/installing-boot9strap-(usm).txt +++ b/_pages/ko_KR/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ SAFE_MODE 펌웨어를 해킹하기 위해, 익스플로잇이 되어있는 Wi-F 이 설명서는 미주, 유럽, 일본, 그리고 한국 지역 기기들 (시스템 버전 다음 글짜가 U, E, J, 아니면 K 인 경우) 와 호환됩니다. -만약 (L/R 어깨 버튼), (위 십자 패드), 또는 (A) 버튼이 동작되지 않다면, [다른 Seedminer 방법](bannerbomb3)을 따라야 합니다. 이 방법에 도움이 필요하다면, [Discord의 Nintendo Homebrew](https://discord.gg/MWxPgEp)에서 영어로 도움을 요청해 주세요. +If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. {: .notice--warning} ### 준비물 diff --git a/_pages/ko_KR/seedminer.txt b/_pages/ko_KR/seedminer.txt index 3e7cc48423..cd0784b816 100644 --- a/_pages/ko_KR/seedminer.txt +++ b/_pages/ko_KR/seedminer.txt @@ -59,31 +59,20 @@ ___ ### 다음 단계 -기기의 암호화 키 (`movable.sed`)를 구한 후, 이것을 다른 익스플로잇하고 함깨 사용해 커스텀 펌웨어를 설치할 것 입니다. 이중에서 경로를 하나 선택해 주세요. +기기의 암호화 키 (`movable.sed`)를 구한 후, 이것을 다른 익스플로잇하고 함깨 사용해 커스텀 펌웨어를 설치할 것 입니다. -#### PicHaxx + universal-otherapp (추천) - -더 깊은 모딩을 위한 Seedminer의 이 사용법은, 포켓몬스터 피크로스의 커스텀 세이브 파일을 `movable.sed` 파일을 사용해서 작성해, universal-otherapp과 같이 써서 SafeB9SInstaller를 실행하는 방식입니다. - -이 작업은 포켓몬스터 피크로스가 필요하며 (e숍에 무료), e숍을 사용할 수 있어야 햐며, USA / EUR / JPN 지역 3DS가 필요합니다. - -[boot9strap 설치 (PicHaxx)](installing-boot9strap-(pichaxx))로 계속합니다 -{: .notice--primary} - -#### boot9strap 설치 (unSAFE_MODE) +#### unSAFE_MODE (Recommended) 더 깊은 모딩을 위한 Seedminer의 이 사용법은, 모든 3DS 기기에 존제하는 SAFE_MODE 펌웨어의 익스플로잇을 사용하는 방식입니다. -이 작업은 PicHaxx + universal-otherapp를 진행하기 불가능한 상황에만 권장합니다 (예: e숍 사용 불가, 또는 KOR 지역 3DS) - [boot9strap 설치 (USM)](installing-boot9strap-(usm))로 계속합니다 -{: .notice--warning} +{: .notice--primary} ___ -#### 대만 (TWN) 기기 +#### Taiwan consoles only -만약 대만 (TWN) 지역 기기 (시스템 버전 끝에 T가 표시됨, 예를 들어 11.15.0-39**T**)을 가지고 계시다면 이 작업을 해야 합니다. **나머지 지역 기기들은 따르면 않됩니다.** +If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.** -[BannerBomb3 + Fredtool (타이완)](bannerbomb3-fredtool-(twn))으로 계속합니다 +Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) {: .notice--warning} \ No newline at end of file diff --git a/_pages/ms_MY/bannerbomb3-fredtool-(twn).txt b/_pages/ms_MY/bannerbomb3-fredtool-(twn).txt index 217bc8c23d..887363e2da 100644 --- a/_pages/ms_MY/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ms_MY/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/ms_MY/bannerbomb3.txt b/_pages/ms_MY/bannerbomb3.txt index c95091a02d..76c5d66146 100644 --- a/_pages/ms_MY/bannerbomb3.txt +++ b/_pages/ms_MY/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/ms_MY/faq.txt b/_pages/ms_MY/faq.txt index f4b02a8cb3..b70cf6d621 100644 --- a/_pages/ms_MY/faq.txt +++ b/_pages/ms_MY/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Ya! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Ya! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/ms_MY/get-started.txt b/_pages/ms_MY/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/ms_MY/get-started.txt +++ b/_pages/ms_MY/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/ms_MY/home.txt b/_pages/ms_MY/home.txt index a1af926888..2bbac715fc 100644 --- a/_pages/ms_MY/home.txt +++ b/_pages/ms_MY/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/ms_MY/installing-boot9strap-(fredtool).txt b/_pages/ms_MY/installing-boot9strap-(fredtool).txt index 7a803f4ae4..1f04078491 100644 --- a/_pages/ms_MY/installing-boot9strap-(fredtool).txt +++ b/_pages/ms_MY/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt b/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt index 87ba09cff5..9f04fe9735 100644 --- a/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/ms_MY/installing-boot9strap-(pichaxx).txt b/_pages/ms_MY/installing-boot9strap-(pichaxx).txt index b23b4ddb68..6211bdc615 100644 --- a/_pages/ms_MY/installing-boot9strap-(pichaxx).txt +++ b/_pages/ms_MY/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/ms_MY/seedminer.txt b/_pages/ms_MY/seedminer.txt index 6805bd443f..ac61d76f6e 100644 --- a/_pages/ms_MY/seedminer.txt +++ b/_pages/ms_MY/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt b/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt index 33207ad58f..6a1f09cc62 100644 --- a/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt +++ b/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Om dit te bereiken, gebruiken we de encryptiesleutel van je systeem (movable.sed Zodra je een DSiWare back-up hebt, kan een exploiteerbare DSiWare titel worden geïnjecteerd in DS Download Play, dat gebruikt kan worden om custom firmware te installeren. -Deze instructies zijn alleen voor Taiwanese consoles (zoals aangegeven door een T aan het einde van de systeemversie, bijvoorbeeld 11.15.0-39T)! Als je console uit een andere regio komt, [kies dan een andere methode](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! Als je console uit een andere regio komt, [kies dan een andere methode](seedminer#next-steps). {: .notice--warning} ### Wat je nodig hebt diff --git a/_pages/nl_NL/bannerbomb3.txt b/_pages/nl_NL/bannerbomb3.txt index 7bda218dba..b0ecbafee2 100644 --- a/_pages/nl_NL/bannerbomb3.txt +++ b/_pages/nl_NL/bannerbomb3.txt @@ -13,7 +13,7 @@ Om dit te bereiken, gebruiken we de encryptiesleutel van je systeem (movable.sed Deze instructies werken aan de consoles van de VS, Europa, Japan en Korea zoals aangegeven in de letters U, E, J, of K na de systeemversie. Als je een Taiwanese console hebt (aangegeven door een T na de systeemversie), volg dan [deze pagina](bannerbomb3-fredtool-(twn)). -{: ..notice--warning} +{: .notice--warning} ### Wat je nodig hebt diff --git a/_pages/nl_NL/faq.txt b/_pages/nl_NL/faq.txt index 9d4af513bc..19a8c942df 100644 --- a/_pages/nl_NL/faq.txt +++ b/_pages/nl_NL/faq.txt @@ -4,11 +4,12 @@ title: "Veelgestelde vragen" {% include toc title="Inhoudsopgave"%} {% capture notice-6 %} -**De nieuwste 3DS firmware is 11.15.0**. Dit is wat je moet weten: +**3DS firmware 11.16.0 was recently released**. Dit is wat je moet weten: -- Als je apparaat *Luma 10.2.1 of nieuwer* gebruikt, dan is het *100% safe* om te updaten. -- Als je apparaat een oudere Luma versie heeft, moet je [Luma updaten](restoring-updating-cfw) voordat je je apparaat update naar 11.15.0. -- Er zijn geen homebrew titels waarvan bekend is dat ze beïnvloed zijn door deze update. Ze zullen blijven werken zoals ze dat op 11.14.0 hebben gedaan. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "Veelgestelde vragen" ## Pre-installatie FAQ #### **Q:** *Ik zit op de nieuwste systeemsoftware. Is mijn apparaat te hacken zonder externe hardware?* -**A:** Ja! De nieuwste firmware (11.15.0) heeft een gratis methode voor het verkrijgen van CFW, namelijk [Seedminer](seedminer). +**A:** Ja! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *Welke apparaten zijn compatibel met deze handleiding?* **A:** De instructies zijn hetzelfde voor alle retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL en New 2DS XL apparaten. Als uw systeem versie string als "0.0.0-0" wordt weergegeven, dan kan het zijn dat je een developer unit hebt. diff --git a/_pages/nl_NL/get-started.txt b/_pages/nl_NL/get-started.txt index dd7c0300c1..b8b5b7e3e4 100644 --- a/_pages/nl_NL/get-started.txt +++ b/_pages/nl_NL/get-started.txt @@ -19,12 +19,12 @@ Als je een ongebruikelijk menu ziet, STOP - je hebt al custom firmware! Ga verde #### Deel II - Systeemversie controle 1. Open de System Settings app -1. Je systeemversie wordt rechtsonder op het bovenste scherm weergegeven (bijv. "Ver. 11.15.0-47U") +1. Je systeemversie wordt rechtsonder op het bovenste scherm weergegeven (bijv. "Ver. 11.16.0-48U") #### Deel III - Selecteer een methode Gebruik de onderstaande versietabel om een methode te kiezen. Een aantal dingen om op te merken: - + De onderstaande versietabel is *inclusief*. Bijvoorbeeld, "van 11.4.0 tot 11.14.0" bevat 11.4.0, 11.14.0, en alle versies daartussenin. + + De onderstaande versietabel is *inclusief*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software-versies werken niet hetzelfde als decimalen. Versies 11.10.0 en hoger zijn nieuwer dan 11.3.0 en zijn daarom niet compatibel met Soundhax. + Het nummer en de letter na de systeemversie zijn niet belangrijk. + Het maakt niet uit welke methode je volgt, het eindresultaat zal hetzelfde zijn (boot9strap+Luma3DS custom firmware setup op de nieuwste firmware). @@ -42,11 +42,11 @@ Gebruik de onderstaande versietabel om een methode te kiezen. Een aantal dingen - 11.15.0 (nieuwste versie) + 11.16.0 (latest version) Seedminer - 11.4.0 tot 11.14.0 + 11.4.0 to 11.15.0 Update je 3DS naar de nieuwste versie met behulp van System Settings @@ -63,6 +63,5 @@ Indien mogelijk, zul je één van de bovenstaande softwaremethoden moeten volgen Anders zijn methoden die op alle versies werken beschikbaar, maar deze vereisen extra hardware: -1. [Boot9strap installeren (kartdlphax)](installing-boot9strap-(kartdlphax)) - Hiervoor heb je een 3DS met custom firmware en een kopie van Mario Kart 7 nodig 1. [Ntrboot](ntrboot) - Hiervoor is een compatibele DS flashkaart nodig 1. [Boot9strap installeren (Hardmod)](installing-boot9strap-(hardmod)) - dit vereist solderen diff --git a/_pages/nl_NL/home.txt b/_pages/nl_NL/home.txt index 6671219ec0..ead1d8e61c 100644 --- a/_pages/nl_NL/home.txt +++ b/_pages/nl_NL/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Een complete handleiding tot 3DS custom firmware,
van stock tot boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Dit is wat je moet weten: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Neem alle inleidende pagina's (inclusief deze pagina!) grondig door voordat je verdergaat. {: .notice--info} diff --git a/_pages/nl_NL/installing-boot9strap-(fredtool).txt b/_pages/nl_NL/installing-boot9strap-(fredtool).txt index 804d239885..36478d164e 100644 --- a/_pages/nl_NL/installing-boot9strap-(fredtool).txt +++ b/_pages/nl_NL/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Boot9strap installeren (Fredtool)" ### Verplicht te lezen +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Deze methode zal Seedminer gebruiken voor verder gebruik te maken van je `movable.sed` bestand om een DSiWare titel te decoderen voor het injecteren van een DSiWare titel in de DS Internet instellingen, om zo verdere toegang te krijgen tot jouw 3DS. Dit vereist een DSiWare backup, bijvoorbeeld van BannerBomb of DSiWare Dumper tool. Dit is een momenteel werkende uitvoering van de "FIRM partitions known-plaintext" exploit, waarvan je [hier](https://www.3dbrew.org/wiki/3DS_System_Flaws) de details kunt vinden. diff --git a/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt b/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt index 6d2e2b8b38..cb068a30b2 100644 --- a/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt +++ b/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Boot9strap installeren (kartdlphax)" ### Verplicht te lezen +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is een exploit voor de Download Play mode van Mario Kart 7. Het kan worden gebruikt met universal-otherapp om custom firmware te installeren op doelapparaten. Om deze instructies te volgen, heb je het volgende nodig: diff --git a/_pages/nl_NL/installing-boot9strap-(pichaxx).txt b/_pages/nl_NL/installing-boot9strap-(pichaxx).txt index 9746034882..7f846c6443 100644 --- a/_pages/nl_NL/installing-boot9strap-(pichaxx).txt +++ b/_pages/nl_NL/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Boot9strap installeren (PicHaxx)" ### Verplicht te lezen +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Deze methode om Seedminer te gebruiken voor verdere exploitatie maakt gebruik van je `movable.sed` bestand om een aangepast opslagbestand te schrijven voor Pokémon Picross, dat vervolgens kan worden gebruikt met universal-otherapp om SafeB9SInstaller uit te voeren. Dit proces zal je Pokémon Picross save bestand overschrijven, als je er een hebt. Als je je Pokémon Picross save bestand wilt behouden, moet je een back-up maken van je `00000001.sav` bestand voordat je het overschrijft. diff --git a/_pages/nl_NL/installing-boot9strap-(usm).txt b/_pages/nl_NL/installing-boot9strap-(usm).txt index 82152732e8..15895bc3a1 100644 --- a/_pages/nl_NL/installing-boot9strap-(usm).txt +++ b/_pages/nl_NL/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ Wanneer het wifi profiel geïnjecteerd is, gebruiken we SAFE_MODE, een herstelfu Deze instructies werken aan de consoles van de VS, Europa, Japan en Korea zoals aangegeven in de letters U, E, J, of K na de systeemversie. -Als je (Rechts/Linkse Shoulder), (D-Pad Up) of (A) knoppen niet werken, moet je [een andere versie van Seedminer](bannerbomb3) volgen. Als je hierbij hulp nodig hebt, join de [Nintendo Homebrew Discord](https://discord.gg/MWxPgEp) en vraag, in het Engels, om hulp. +If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. {: .notice--warning} ### Wat je nodig hebt diff --git a/_pages/nl_NL/seedminer.txt b/_pages/nl_NL/seedminer.txt index 60b29ffcff..638dc95054 100644 --- a/_pages/nl_NL/seedminer.txt +++ b/_pages/nl_NL/seedminer.txt @@ -59,31 +59,20 @@ ___ ### Volgende stappen -Zodra je de encryptiesleutel (`movable.sed`) hebt, zal je deze gebruiken in combinatie met andere exploits om custom firmware te installeren op je 3DS. Selecteer hieronder een exploit. +Zodra je de encryptiesleutel (`movable.sed`) hebt, zal je deze gebruiken in combinatie met andere exploits om custom firmware te installeren op je 3DS. -#### PicHaxx + universal-otherapp (aanbevolen) - -Deze methode om Seedminer te gebruiken voor verdere exploitatie maakt gebruik van je `movable.sed` bestand om een aangepast opslagbestand te schrijven voor Pokémon Picross, dat vervolgens kan worden gebruikt met universal-otherapp om custom firmware te installeren. - -Voor deze route heb je de Pokémon Picross app nodig (gratis op eShop), je hebt dus ook toegang nodig tot de eShop en een 3DS met regio USA, EUR of JPN. - -Ga verder naar [boot9strap installeren (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Boot9strap installeren (unSAFE_MODE) +#### unSAFE_MODE (Recommended) Deze methode om Seedminer te gebruiken voor verdere exploitatie maakt gebruik van je `movable.sed` bestand om te profiteren van exploits in de SAFE_MODE firmware aanwezig in alle 3DS consoles. -Deze route wordt alleen aanbevolen als je om een of andere reden de PicHaxx + universal-otherapp route niet kunt volgen, dit kan door een gebrek aan toegang tot de eShop of als je een Koreaanse 3DS hebt. - Ga verder naar [boot9strap installeren (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ -#### Enkel voor Taiwanese consoles +#### Taiwan consoles only -Als je een Taiwanees apparaat hebt (aangegeven met een T aan het einde van de systeemversie, zoals 11.15.0-39**T**), dan moet je deze route volgen. **Andere regio's mogen deze route niet volgen.** +If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.** -Ga verder naar [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) +Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) {: .notice--warning} \ No newline at end of file diff --git a/_pages/no_NO/bannerbomb3-fredtool-(twn).txt b/_pages/no_NO/bannerbomb3-fredtool-(twn).txt index bc85907615..5021ffdab8 100644 --- a/_pages/no_NO/bannerbomb3-fredtool-(twn).txt +++ b/_pages/no_NO/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/no_NO/bannerbomb3.txt b/_pages/no_NO/bannerbomb3.txt index d59545844f..41a706b9ac 100644 --- a/_pages/no_NO/bannerbomb3.txt +++ b/_pages/no_NO/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/no_NO/faq.txt b/_pages/no_NO/faq.txt index dd9bf8c4cd..2b12da30d0 100644 --- a/_pages/no_NO/faq.txt +++ b/_pages/no_NO/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Ja! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Ja! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/no_NO/get-started.txt b/_pages/no_NO/get-started.txt index 8ec8892ffe..df58b2070f 100644 --- a/_pages/no_NO/get-started.txt +++ b/_pages/no_NO/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/no_NO/home.txt b/_pages/no_NO/home.txt index 17d8bec672..50d1f75bc7 100644 --- a/_pages/no_NO/home.txt +++ b/_pages/no_NO/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/no_NO/installing-boot9strap-(fredtool).txt b/_pages/no_NO/installing-boot9strap-(fredtool).txt index e11779b663..efd9b84a9a 100644 --- a/_pages/no_NO/installing-boot9strap-(fredtool).txt +++ b/_pages/no_NO/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/no_NO/installing-boot9strap-(kartdlphax).txt b/_pages/no_NO/installing-boot9strap-(kartdlphax).txt index a3ec389c5e..818d72771d 100644 --- a/_pages/no_NO/installing-boot9strap-(kartdlphax).txt +++ b/_pages/no_NO/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/no_NO/installing-boot9strap-(pichaxx).txt b/_pages/no_NO/installing-boot9strap-(pichaxx).txt index 7787bd4301..e710371f42 100644 --- a/_pages/no_NO/installing-boot9strap-(pichaxx).txt +++ b/_pages/no_NO/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/no_NO/seedminer.txt b/_pages/no_NO/seedminer.txt index c96547bc4f..00d94ebfb9 100644 --- a/_pages/no_NO/seedminer.txt +++ b/_pages/no_NO/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/pl_PL/bannerbomb3-fredtool-(twn).txt b/_pages/pl_PL/bannerbomb3-fredtool-(twn).txt index bcda5d2fdb..b05d50db93 100644 --- a/_pages/pl_PL/bannerbomb3-fredtool-(twn).txt +++ b/_pages/pl_PL/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/pl_PL/bannerbomb3.txt b/_pages/pl_PL/bannerbomb3.txt index 5eff8a66f3..3e96f29f51 100644 --- a/_pages/pl_PL/bannerbomb3.txt +++ b/_pages/pl_PL/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### Czego Potrzebujesz diff --git a/_pages/pl_PL/faq.txt b/_pages/pl_PL/faq.txt index ca52a5d527..96921abba6 100644 --- a/_pages/pl_PL/faq.txt +++ b/_pages/pl_PL/faq.txt @@ -4,11 +4,12 @@ title: "Często zadawane pytania (FAQ)" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "Często zadawane pytania (FAQ)" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**Odp.:** Tak! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**Odp.:** Tak! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/pl_PL/get-started.txt b/_pages/pl_PL/get-started.txt index aaceba7d9a..b75e392966 100644 --- a/_pages/pl_PL/get-started.txt +++ b/_pages/pl_PL/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/pl_PL/home.txt b/_pages/pl_PL/home.txt index 8ce1888b28..101584218e 100644 --- a/_pages/pl_PL/home.txt +++ b/_pages/pl_PL/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Kompletna instrukcja instalacji Custom Firmware na konsoli Nintendo 3DS,
od fabrycznej, niezmodyfikowanej wersji do boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Dokładnie przeczytaj wszystkie strony wprowadzające (także tą!) zanim przejdziesz dalej. {: .notice--info} diff --git a/_pages/pl_PL/installing-boot9strap-(fredtool).txt b/_pages/pl_PL/installing-boot9strap-(fredtool).txt index 8fa00d32f6..f949d2c6f5 100644 --- a/_pages/pl_PL/installing-boot9strap-(fredtool).txt +++ b/_pages/pl_PL/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Instalacja Boot9strap (Fredtool)" ### Wymagana Lektura +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. To obecnie działająca implementacja luki: "FIRM partitions known-plaintext" szczegółowo opisanej [tutaj] (https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt b/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt index 456abd1a43..83f2d9ae64 100644 --- a/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt +++ b/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Wymagana Lektura +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/pl_PL/installing-boot9strap-(pichaxx).txt b/_pages/pl_PL/installing-boot9strap-(pichaxx).txt index b686f5c49e..b13ab07991 100644 --- a/_pages/pl_PL/installing-boot9strap-(pichaxx).txt +++ b/_pages/pl_PL/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Wymagana Lektura +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/pl_PL/seedminer.txt b/_pages/pl_PL/seedminer.txt index 50fd4b4eef..972bcb358f 100644 --- a/_pages/pl_PL/seedminer.txt +++ b/_pages/pl_PL/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt b/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt index df679c9032..f02d519ae1 100644 --- a/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/pt_BR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ Para fazer isso, usamos a chave de criptografia do seu sistema (movable.sed) par Assim que tiver um backup de DSiWare, um aplicativo exploitable de DSiWare pode ser inserido no DS Download Play, que pode ser usado para instalar um custom firmware. -Estas instruções são para consoles tailandêses APENAS (indicado por um T no final da versão do sistema, por exemplo, 11.15.0-39T)! Se o seu console for de qualquer outra região, [escolha outro método](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! Se o seu console for de qualquer outra região, [escolha outro método](seedminer#next-steps). {: .notice--warning} ### O que você precisa diff --git a/_pages/pt_BR/bannerbomb3.txt b/_pages/pt_BR/bannerbomb3.txt index 2f77fe9aaf..9afc1cb9a8 100644 --- a/_pages/pt_BR/bannerbomb3.txt +++ b/_pages/pt_BR/bannerbomb3.txt @@ -1,5 +1,5 @@ --- -title: "BannerBomb3" +BannerBomb3 --- {% include toc title="Tabela de Conteúdo" %} @@ -13,7 +13,7 @@ Para alcançar isso, usamos a sua chave de encriptação (movable.sed) para mont Essas instruções funcionam nas versões de consoles EUA, Europa, Japão e Coréia, indicadas pelas letras U, E, J ou K após a versão do sistema. Se você tiver um console tailandês (indicado por um T após a versão do sistema), siga [esta página](bannerbomb3-fredtool-(twn)) ao invés desta. -{: ..notice--warning} +{: .notice--warning} ### O que você precisa diff --git a/_pages/pt_BR/faq.txt b/_pages/pt_BR/faq.txt index e329d38300..0ce3220ede 100644 --- a/_pages/pt_BR/faq.txt +++ b/_pages/pt_BR/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Tabela de Conteúdo"%} {% capture notice-6 %} -**O último firmware para 3DS é o 11.15.0**. Veja aqui o que você deve saber: +**3DS firmware 11.16.0 was recently released**. Veja aqui o que você deve saber: -- Se seu dispositivo está com *Luma 10.2.1 e adiante*, é *100% seguro* fazer um update. -- Se seu dispositivo está numa versão anterior do Luma, você deve [atualizar o Luma](restoring-updating-cfw) antes que você atualize seu dispositivo. -- Nenhum aplicativo de Homebrew conhecido foi afetado por esse update. Eles irão funcionar como funcionaram no 11.14.0 e anterior. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,8 +17,7 @@ title: "FAQ" ## FAQ Pré-Instalação ### **P:** *Eu estou na versão mais recente do sistema. É possível aplicar hack em meu sistema sem hardware externo?* -**R:** Sim! O firmware mais recente (11.15.0) tem um método gratuito de injetar CFW chamado - [Seedminer](seedminer). +**R:** Sim! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **P:** *Com quais dispositivos este guia é compatível?* **R:** As instruções são as mesmas para todos os dispositivos de varejo 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL e New 2DS XL. Se a versão do seu sistema for exibida como "0.0.0-0", então você talvez tenha um dispositivo de desenvolvedor. diff --git a/_pages/pt_BR/get-started.txt b/_pages/pt_BR/get-started.txt index 503f7cb7a5..d6dd1f365c 100644 --- a/_pages/pt_BR/get-started.txt +++ b/_pages/pt_BR/get-started.txt @@ -19,12 +19,12 @@ Se você ver um menu incomum, PARE - você já tem custom firmware! Continue [da #### Seção II - Verificação da Versão do Sistema 1. Abra o aplicativo Configuração do Console -1. A versão do seu sistema será exibida na parte inferior direita da tela superior (por exemplo, "Ver. 11.15.0-47U") +1. A versão do seu sistema será exibida na parte inferior direita da tela superior (por exemplo, "Ver. 11.16.0-48U") #### Seção III - Selecione um Método Use a tabela de versões abaixo para selecionar um método. Algumas coisas a considerar: - + A tabela de versões abaixo é *inclusiva*. Por exemplo, "de 11.4.0 à 11.14.0" inclui 11.4.0, 11.14.0, e todas as versões entre eles. + + A tabela de versões abaixo é *inclusiva*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + As versões de software não funcionam da mesma forma que decimais. Versões 11.10.0 e adiante são mais recentes que 11.3.0, e sendo assim não são compatíveis com Soundhax. + O número e a letra após a versão do sistema não são importantes. + Não importa o método que você siga, o resultado final é o mesmo (instalação boot9strap+Luma3DS custom firmware no firmware mais recente do sistema). @@ -42,11 +42,11 @@ Use a tabela de versões abaixo para selecionar um método. Algumas coisas a con - 11.15.0 (versão mais recente) + 11.16.0 (latest version) Seedminer - 11.4.0 para 11.14.0 + 11.4.0 to 11.15.0 Atualize seu 3DS para a versão mais recente através da Configuração do Console @@ -63,6 +63,5 @@ Se possível, você deve seguir um dos métodos de software listados acima. Caso contrário, métodos que funcionam em todas as versões estão disponíveis, mas requerem hardware adicional: -1. [Instalando boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requer um 3DS com custom firmware e uma cópia de Mario Kart 7 1. [ntrboot](ntrboot) - requer um flashcart de DS compatível 1. [Instalando boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requer soldagem diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt index 241255801b..ab3c41b467 100644 --- a/_pages/pt_BR/home.txt +++ b/_pages/pt_BR/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Um guia completo de Custom Firmware para o 3DS,
de varejo até boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Veja aqui o que você deve saber: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Leia atentamente todas as páginas introdutórias (incluindo essa aqui!) antes de prosseguir. {: .notice--info} diff --git a/_pages/pt_BR/installing-boot9strap-(fredtool).txt b/_pages/pt_BR/installing-boot9strap-(fredtool).txt index 6eda5bff52..f1b4a634d0 100644 --- a/_pages/pt_BR/installing-boot9strap-(fredtool).txt +++ b/_pages/pt_BR/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Instalando o Boot9strap (Fredtool)" ### Leitura Obrigatória +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Este método de usar o Seedminer para exploiting usa seu arquivo `movable.sed` para descriptografar qualquer aplicativo DSiWare para fins de injetar um título de DSiWare exploitable nas Configurações de Internet do DS. Isto requer que você tenha um backup do DSiWare, por exemplo, do BannerBomb ou DSiWare Dumper tool. Esta é uma implementação funcional do exploit "FIRM partitions known-plaintext" detalhado [aqui](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt index 14acbcd523..722259ee1e 100644 --- a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Instalando boot9strap (kartdlphax)" ### Leitura Obrigatória +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax é um exploit para o modo Download Play de Mario Kart 7. Pode ser usado com universal-otherapp para instalar custom firmware no dispositivo de destino. Para poder seguir estas instruções, você precisará do seguinte: diff --git a/_pages/pt_BR/installing-boot9strap-(pichaxx).txt b/_pages/pt_BR/installing-boot9strap-(pichaxx).txt index 530039d1c4..8865390eb0 100644 --- a/_pages/pt_BR/installing-boot9strap-(pichaxx).txt +++ b/_pages/pt_BR/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Instalando boot9strap (PicHaxx)" ### Leitura Obrigatória +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Este método de usar o Seedminer para exploiting usa seu `movable.sed` para manipular um arquivo de save personalizado para Pokémon Picross, que pode então ser usado com universal-otherapp para executar o SafeB9SInstaller. Esse processo irá substituir seu save de Pokémon Picross, se você tiver um. Se você deseja preservar seus dados, você deve fazer um backup de seu arquivo `00000001.sav` antes de substituí-lo. diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt index cefb507222..bcec08d50f 100644 --- a/_pages/pt_BR/installing-boot9strap-(usm).txt +++ b/_pages/pt_BR/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ Assim que o perfil Wi-Fi for injetado, usaremos o SAFE_MODE, que é um recurso d Essas instruções funcionam nas versões de consoles EUA, Europa, Japão e Coréia, indicadas pelas letras U, E, J ou K após a versão do sistema. -Se os seus botões (Gatilho Esquerdo/Direito), (Botão direcional pra cima), ou (A) não funcionarem, você precisará seguir [um ramo alternativo de Seedminer](bannerbomb3). Para obter ajuda com este assunto, entre no [Discord do Nintendo Homebrew](https://discord.gg/MWxPgEp) e peça ajuda, em Inglês. +If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. {: .notice--warning} ### O que é necessário diff --git a/_pages/pt_BR/seedminer.txt b/_pages/pt_BR/seedminer.txt index 07f90a0c05..dc5541b5bc 100644 --- a/_pages/pt_BR/seedminer.txt +++ b/_pages/pt_BR/seedminer.txt @@ -59,31 +59,20 @@ ___ ### Próximos passos -Assim que você tiver a chave de criptografia do seu dispositivo (`movable.sed`), você o usará em conjunto com outros exploits para instalar custom firmware no seu 3DS. Selecione um exploit abaixo. +Assim que você tiver a chave de criptografia do seu dispositivo (`movable.sed`), você o usará em conjunto com outros exploits para instalar custom firmware no seu 3DS. -#### PicHaxx + universal-otherapp (Recomendado) - -Este método de usar o Seedminer para exploiting usa seu `movable.sed` para manipular um arquivo de save personalizado para Pokémon Picross, que pode então ser usado com universal-otherapp para executar o SafeB9SInstaller. - -Esta rota requer o aplicativo Pokémon Picross (grátis na eShop), e assim requer acesso ao eShop e a um 3DS com uma região dos EUA, EUR ou JPN. - -Continue em [Instalando boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Instalando boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) Esse método que utiliza o Seedminer para exploiting usa o seu arquivo `movable.sed` para tirar vantagem do firmware SAFE_MODE presente em todas as unidades de 3DS. -Esta rota só é recomendada se você for por algum motivo for incapaz de seguir a rota PicHaxx + universal-otherapp tais como a falta de acesso à eShop ou usando um 3DS coreano. - Continue em [Instalando boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ -#### Apenas consoles tailandêses +#### Taiwan consoles only -Se você tiver um dispositivo tailandês (indicado com T no final da versão do sistema, como 11.15.0-39**T**), você deve seguir esta rota. **Outras regiões não devem seguir esta rota.** +If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.** -Continue em [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) +Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) {: .notice--warning} \ No newline at end of file diff --git a/_pages/pt_PT/bannerbomb3-fredtool-(twn).txt b/_pages/pt_PT/bannerbomb3-fredtool-(twn).txt index d996d7df33..9b6279ac30 100644 --- a/_pages/pt_PT/bannerbomb3-fredtool-(twn).txt +++ b/_pages/pt_PT/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/pt_PT/bannerbomb3.txt b/_pages/pt_PT/bannerbomb3.txt index a306f29669..2179ed1d08 100644 --- a/_pages/pt_PT/bannerbomb3.txt +++ b/_pages/pt_PT/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/pt_PT/faq.txt b/_pages/pt_PT/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/pt_PT/faq.txt +++ b/_pages/pt_PT/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/pt_PT/get-started.txt b/_pages/pt_PT/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/pt_PT/get-started.txt +++ b/_pages/pt_PT/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/pt_PT/home.txt b/_pages/pt_PT/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/pt_PT/home.txt +++ b/_pages/pt_PT/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/pt_PT/installing-boot9strap-(fredtool).txt b/_pages/pt_PT/installing-boot9strap-(fredtool).txt index baaae7774b..dffe111f3b 100644 --- a/_pages/pt_PT/installing-boot9strap-(fredtool).txt +++ b/_pages/pt_PT/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Leitura Obrigatória +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt b/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt index 0f70abee2b..0e366170d5 100644 --- a/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt +++ b/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Leitura Obrigatória +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/pt_PT/installing-boot9strap-(pichaxx).txt b/_pages/pt_PT/installing-boot9strap-(pichaxx).txt index 7b7b112922..b594069069 100644 --- a/_pages/pt_PT/installing-boot9strap-(pichaxx).txt +++ b/_pages/pt_PT/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Leitura Obrigatória +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/pt_PT/seedminer.txt b/_pages/pt_PT/seedminer.txt index 93ae5837f2..0601d4652f 100644 --- a/_pages/pt_PT/seedminer.txt +++ b/_pages/pt_PT/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/ro_RO/bannerbomb3-fredtool-(twn).txt b/_pages/ro_RO/bannerbomb3-fredtool-(twn).txt index 40a6ccd3e2..1556f43ed5 100644 --- a/_pages/ro_RO/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ro_RO/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/ro_RO/bannerbomb3.txt b/_pages/ro_RO/bannerbomb3.txt index f27959b6ab..3f2fa16cba 100644 --- a/_pages/ro_RO/bannerbomb3.txt +++ b/_pages/ro_RO/bannerbomb3.txt @@ -13,7 +13,7 @@ Pentru a îndeplini asta, vom folosi cheia de criptare a sistemului dumneavoastr Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japonia și Coreea, indicate de literele U, E, J, sau K după versiunea de sistem. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### Ce aveți nevoie diff --git a/_pages/ro_RO/faq.txt b/_pages/ro_RO/faq.txt index 2581e6278d..5e249e7b17 100644 --- a/_pages/ro_RO/faq.txt +++ b/_pages/ro_RO/faq.txt @@ -4,11 +4,12 @@ title: "Întrebări frecvente" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "Întrebări frecvente" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**R:** Da! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**R:** Da! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/ro_RO/get-started.txt b/_pages/ro_RO/get-started.txt index 1ef813f104..4809978560 100644 --- a/_pages/ro_RO/get-started.txt +++ b/_pages/ro_RO/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/ro_RO/home.txt b/_pages/ro_RO/home.txt index 7d44b767e0..9f7310373f 100644 --- a/_pages/ro_RO/home.txt +++ b/_pages/ro_RO/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Un ghid complet spre firmware personalizat pentru 3DS,
de la stoc la boot9strap.
" # --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Citiți cu atenție toate paginile introductive (inclusiv aceasta!) înainte de a continua. {: .notice--info} diff --git a/_pages/ro_RO/installing-boot9strap-(fredtool).txt b/_pages/ro_RO/installing-boot9strap-(fredtool).txt index 532d49df60..17fc878d61 100644 --- a/_pages/ro_RO/installing-boot9strap-(fredtool).txt +++ b/_pages/ro_RO/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Instalând Boot9strap (Fredtool)" ### Lectură obligatorie +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Această metodă de a folosi Seedminer pentru mai multă exploatare utilizează fişierul `movable.sed` pentru a decripta orice titlu de DSiWare cu scopul de a injecta un titlu DSiWare exploatabil în aplicaţia DS Internet Settings. Aceasta are nevoie de o copie de rezervă DSiWare, de exemplu de la BannerBomb sau unealta DSiWare Dumper. Acest lucru este în prezent o implementare a exploit-ului "Partiții FIRM de text simplu" detaliat [aici](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt b/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt index 873c6c4635..0c7cf8ef09 100644 --- a/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Lectură obligatorie +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/ro_RO/installing-boot9strap-(pichaxx).txt b/_pages/ro_RO/installing-boot9strap-(pichaxx).txt index 814f69ae39..e723aa601c 100644 --- a/_pages/ro_RO/installing-boot9strap-(pichaxx).txt +++ b/_pages/ro_RO/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Lectură obligatorie +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/ro_RO/seedminer.txt b/_pages/ro_RO/seedminer.txt index 2b8e7d4409..5a13c89374 100644 --- a/_pages/ro_RO/seedminer.txt +++ b/_pages/ro_RO/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/ru_RU/bannerbomb3-fredtool-(twn).txt b/_pages/ru_RU/bannerbomb3-fredtool-(twn).txt index d0f24f163f..3a6fba748f 100644 --- a/_pages/ru_RU/bannerbomb3-fredtool-(twn).txt +++ b/_pages/ru_RU/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/ru_RU/bannerbomb3.txt b/_pages/ru_RU/bannerbomb3.txt index b26f750d76..0f010b5533 100644 --- a/_pages/ru_RU/bannerbomb3.txt +++ b/_pages/ru_RU/bannerbomb3.txt @@ -13,7 +13,7 @@ title: "BannerBomb3" Эти инструкции работают на консолях регионов USA, Europe, Japan и Korea. На регион консоли указывает буква U, E, J или K после версии прошивки. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### Что понадобится diff --git a/_pages/ru_RU/faq.txt b/_pages/ru_RU/faq.txt index e46e256368..05ac489f60 100644 --- a/_pages/ru_RU/faq.txt +++ b/_pages/ru_RU/faq.txt @@ -4,11 +4,12 @@ title: "Вопросы и ответы" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "Вопросы и ответы" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**О:** Да! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**О:** Да! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/ru_RU/get-started.txt b/_pages/ru_RU/get-started.txt index 8d39ae8682..97ce181a68 100644 --- a/_pages/ru_RU/get-started.txt +++ b/_pages/ru_RU/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt index de44ada997..37b365a767 100644 --- a/_pages/ru_RU/home.txt +++ b/_pages/ru_RU/home.txt @@ -9,6 +9,17 @@ header: excerpt: "Полное руководство по прошивке 3DS,
от начала до boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Внимательно прочитайте все вводные страницы (включая эту!) прежде чем продолжить. {: .notice--info} diff --git a/_pages/ru_RU/installing-boot9strap-(fredtool).txt b/_pages/ru_RU/installing-boot9strap-(fredtool).txt index 528f383711..a30665bae5 100644 --- a/_pages/ru_RU/installing-boot9strap-(fredtool).txt +++ b/_pages/ru_RU/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Установка Boot9strap (Fredtool)" ### Обязательно к прочтению +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для расшифровки любого тайтла DSiWare в целях инъекции уязвимого тайтла DSiWare в приложение DS Internet Settings. Этот метод требует наличия бэкапа DSiWare, полученного с помощью BannerBomb или DSiWare Dumper. Это рабочая реализация эксплойта "FIRM partitions known-plaintext". Подробнее о нем [здесь](https://www.3dbrew.org/wiki/3DS_System_Flaws) (англ.). diff --git a/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt b/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt index bf569e20c2..2c2272ffa7 100644 --- a/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt +++ b/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Обязательно к прочтению +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/ru_RU/installing-boot9strap-(pichaxx).txt b/_pages/ru_RU/installing-boot9strap-(pichaxx).txt index 32f731a23c..bd550cf2ee 100644 --- a/_pages/ru_RU/installing-boot9strap-(pichaxx).txt +++ b/_pages/ru_RU/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Обязательно к прочтению +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/ru_RU/installing-boot9strap-(usm).txt b/_pages/ru_RU/installing-boot9strap-(usm).txt index 554261f5eb..4dbf80193e 100644 --- a/_pages/ru_RU/installing-boot9strap-(usm).txt +++ b/_pages/ru_RU/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Эти инструкции работают на консолях регионов USA, Europe, Japan и Korea. На регион консоли указывает буква U, E, J или K после версии прошивки. -If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). Если вам нужна помощь в этом деле, зайдите на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) вам помочь. +If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. {: .notice--warning} ### Что понадобится diff --git a/_pages/ru_RU/seedminer.txt b/_pages/ru_RU/seedminer.txt index b5812e95b8..25e66050ac 100644 --- a/_pages/ru_RU/seedminer.txt +++ b/_pages/ru_RU/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/sv_SE/bannerbomb3-fredtool-(twn).txt b/_pages/sv_SE/bannerbomb3-fredtool-(twn).txt index dae3184755..e562ab2aff 100644 --- a/_pages/sv_SE/bannerbomb3-fredtool-(twn).txt +++ b/_pages/sv_SE/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/sv_SE/bannerbomb3.txt b/_pages/sv_SE/bannerbomb3.txt index 637d767c39..2e212e9a27 100644 --- a/_pages/sv_SE/bannerbomb3.txt +++ b/_pages/sv_SE/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/sv_SE/faq.txt b/_pages/sv_SE/faq.txt index 326866c58c..6b7e9b987f 100644 --- a/_pages/sv_SE/faq.txt +++ b/_pages/sv_SE/faq.txt @@ -4,11 +4,12 @@ title: "Vanliga Frågor" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "Vanliga Frågor" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**S:** Ja! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**S:** Ja! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/sv_SE/get-started.txt b/_pages/sv_SE/get-started.txt index 39803b09f2..c332b40b0c 100644 --- a/_pages/sv_SE/get-started.txt +++ b/_pages/sv_SE/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/sv_SE/home.txt b/_pages/sv_SE/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/sv_SE/home.txt +++ b/_pages/sv_SE/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/sv_SE/installing-boot9strap-(fredtool).txt b/_pages/sv_SE/installing-boot9strap-(fredtool).txt index d417111f22..23f1793d86 100644 --- a/_pages/sv_SE/installing-boot9strap-(fredtool).txt +++ b/_pages/sv_SE/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt b/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt +++ b/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/sv_SE/installing-boot9strap-(pichaxx).txt b/_pages/sv_SE/installing-boot9strap-(pichaxx).txt index b7d706976e..c38ba5f411 100644 --- a/_pages/sv_SE/installing-boot9strap-(pichaxx).txt +++ b/_pages/sv_SE/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/sv_SE/seedminer.txt b/_pages/sv_SE/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/sv_SE/seedminer.txt +++ b/_pages/sv_SE/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/th_TH/bannerbomb3-fredtool-(twn).txt b/_pages/th_TH/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/th_TH/bannerbomb3-fredtool-(twn).txt +++ b/_pages/th_TH/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/th_TH/bannerbomb3.txt b/_pages/th_TH/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/th_TH/bannerbomb3.txt +++ b/_pages/th_TH/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/th_TH/faq.txt b/_pages/th_TH/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/th_TH/faq.txt +++ b/_pages/th_TH/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/th_TH/get-started.txt b/_pages/th_TH/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/th_TH/get-started.txt +++ b/_pages/th_TH/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/th_TH/home.txt b/_pages/th_TH/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/th_TH/home.txt +++ b/_pages/th_TH/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/th_TH/installing-boot9strap-(fredtool).txt b/_pages/th_TH/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/th_TH/installing-boot9strap-(fredtool).txt +++ b/_pages/th_TH/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/th_TH/installing-boot9strap-(kartdlphax).txt b/_pages/th_TH/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/th_TH/installing-boot9strap-(kartdlphax).txt +++ b/_pages/th_TH/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/th_TH/installing-boot9strap-(pichaxx).txt b/_pages/th_TH/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/th_TH/installing-boot9strap-(pichaxx).txt +++ b/_pages/th_TH/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/th_TH/seedminer.txt b/_pages/th_TH/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/th_TH/seedminer.txt +++ b/_pages/th_TH/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/tr_TR/bannerbomb3-fredtool-(twn).txt b/_pages/tr_TR/bannerbomb3-fredtool-(twn).txt index 0b96ab4b71..569228e8de 100644 --- a/_pages/tr_TR/bannerbomb3-fredtool-(twn).txt +++ b/_pages/tr_TR/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/tr_TR/bannerbomb3.txt b/_pages/tr_TR/bannerbomb3.txt index 8ea0b54d49..7be305eccd 100644 --- a/_pages/tr_TR/bannerbomb3.txt +++ b/_pages/tr_TR/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/tr_TR/faq.txt b/_pages/tr_TR/faq.txt index ae3ddd12ca..614c2e3876 100644 --- a/_pages/tr_TR/faq.txt +++ b/_pages/tr_TR/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**C:** Evet! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**C:** Evet! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/tr_TR/get-started.txt b/_pages/tr_TR/get-started.txt index 7a438a5642..2b82de95d2 100644 --- a/_pages/tr_TR/get-started.txt +++ b/_pages/tr_TR/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/tr_TR/home.txt b/_pages/tr_TR/home.txt index 07025785a1..899d11609a 100644 --- a/_pages/tr_TR/home.txt +++ b/_pages/tr_TR/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/tr_TR/installing-boot9strap-(fredtool).txt b/_pages/tr_TR/installing-boot9strap-(fredtool).txt index db049e3742..834b7246bd 100644 --- a/_pages/tr_TR/installing-boot9strap-(fredtool).txt +++ b/_pages/tr_TR/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Okumanız Gerekli +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt b/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt index 7424c1a90b..6fc56425f6 100644 --- a/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt +++ b/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Okumanız Gerekli +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/tr_TR/installing-boot9strap-(pichaxx).txt b/_pages/tr_TR/installing-boot9strap-(pichaxx).txt index ab29e006f7..f1ff860705 100644 --- a/_pages/tr_TR/installing-boot9strap-(pichaxx).txt +++ b/_pages/tr_TR/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Okumanız Gerekli +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/tr_TR/seedminer.txt b/_pages/tr_TR/seedminer.txt index 9daf655ee1..9910401ca8 100644 --- a/_pages/tr_TR/seedminer.txt +++ b/_pages/tr_TR/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/uk_UA/bannerbomb3-fredtool-(twn).txt b/_pages/uk_UA/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/uk_UA/bannerbomb3-fredtool-(twn).txt +++ b/_pages/uk_UA/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/uk_UA/bannerbomb3.txt b/_pages/uk_UA/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/uk_UA/bannerbomb3.txt +++ b/_pages/uk_UA/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/uk_UA/faq.txt b/_pages/uk_UA/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/uk_UA/faq.txt +++ b/_pages/uk_UA/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/uk_UA/get-started.txt b/_pages/uk_UA/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/uk_UA/get-started.txt +++ b/_pages/uk_UA/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/uk_UA/home.txt b/_pages/uk_UA/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/uk_UA/home.txt +++ b/_pages/uk_UA/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/uk_UA/installing-boot9strap-(fredtool).txt b/_pages/uk_UA/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/uk_UA/installing-boot9strap-(fredtool).txt +++ b/_pages/uk_UA/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt b/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt +++ b/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/uk_UA/installing-boot9strap-(pichaxx).txt b/_pages/uk_UA/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/uk_UA/installing-boot9strap-(pichaxx).txt +++ b/_pages/uk_UA/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/uk_UA/seedminer.txt b/_pages/uk_UA/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/uk_UA/seedminer.txt +++ b/_pages/uk_UA/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/vi_VN/bannerbomb3-fredtool-(twn).txt b/_pages/vi_VN/bannerbomb3-fredtool-(twn).txt index 5ec5152d52..da81a6ee88 100644 --- a/_pages/vi_VN/bannerbomb3-fredtool-(twn).txt +++ b/_pages/vi_VN/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps). {: .notice--warning} ### What you need diff --git a/_pages/vi_VN/bannerbomb3.txt b/_pages/vi_VN/bannerbomb3.txt index 265e7402d6..decbbb1f27 100644 --- a/_pages/vi_VN/bannerbomb3.txt +++ b/_pages/vi_VN/bannerbomb3.txt @@ -13,7 +13,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead. -{: ..notice--warning} +{: .notice--warning} ### What You Need diff --git a/_pages/vi_VN/faq.txt b/_pages/vi_VN/faq.txt index 81439dcae3..d5095b77cb 100644 --- a/_pages/vi_VN/faq.txt +++ b/_pages/vi_VN/faq.txt @@ -4,11 +4,12 @@ title: "FAQ" {% include toc title="Table of Contents"%} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. Here's what you should know: +**3DS firmware 11.16.0 was recently released**. Here's what you should know: -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- If your device is on an older Luma version, you should [update Luma](restoring-updating-cfw) before you update your device to 11.15.0. -- No homebrew titles are known to have been affected by this update. They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. Is my device hackable without any external hardware?* -**A:** Yes! The latest firmware (11.15.0) has a free method for getting CFW named [Seedminer](seedminer). +**A:** Yes! The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A:** The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL devices. If your system version string displays as "0.0.0-0", then you may have a developer unit. diff --git a/_pages/vi_VN/get-started.txt b/_pages/vi_VN/get-started.txt index e011ec7dd8..e57dfc4be7 100644 --- a/_pages/vi_VN/get-started.txt +++ b/_pages/vi_VN/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### Section II - System Version Check 1. Open the System Settings application -1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.16.0-48U") #### Section III - Select a Method Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. For example, "from 11.4.0 to 11.14.0" includes 11.4.0, 11.14.0, and all versions in between. + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (latest version) + 11.16.0 (latest version) Seedminer - 11.4.0 to 11.14.0 + 11.4.0 to 11.15.0 Update your 3DS to the latest version through System Settings @@ -63,6 +63,5 @@ If possible, you should follow one of the software methods listed above. Otherwise, methods that work on all versions are available, but require additional hardware: -1. [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax)) - requires a 3DS with custom firmware and a copy of Mario Kart 7 1. [ntrboot](ntrboot) - requires compatible DS flashcart 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering diff --git a/_pages/vi_VN/home.txt b/_pages/vi_VN/home.txt index fdd3e79760..8f95081a11 100644 --- a/_pages/vi_VN/home.txt +++ b/_pages/vi_VN/home.txt @@ -9,6 +9,17 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. Here's what you should know: + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--info} diff --git a/_pages/vi_VN/installing-boot9strap-(fredtool).txt b/_pages/vi_VN/installing-boot9strap-(fredtool).txt index 6d973b080b..3b0273de72 100644 --- a/_pages/vi_VN/installing-boot9strap-(fredtool).txt +++ b/_pages/vi_VN/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "Installing Boot9strap (Fredtool)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). diff --git a/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt b/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt index 8ab9640b9c..283631fa36 100644 --- a/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt +++ b/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (kartdlphax)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax is an exploit for the Download Play mode of Mario Kart 7. It can be used with universal-otherapp to install custom firmware on target devices. In order to follow these instructions, you will need the following: diff --git a/_pages/vi_VN/installing-boot9strap-(pichaxx).txt b/_pages/vi_VN/installing-boot9strap-(pichaxx).txt index fb7d885428..a9bfc6c10a 100644 --- a/_pages/vi_VN/installing-boot9strap-(pichaxx).txt +++ b/_pages/vi_VN/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "Installing boot9strap (PicHaxx)" ### Required Reading +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/vi_VN/seedminer.txt b/_pages/vi_VN/seedminer.txt index 333617c42a..2af9d2113c 100644 --- a/_pages/vi_VN/seedminer.txt +++ b/_pages/vi_VN/seedminer.txt @@ -59,25 +59,14 @@ ___ ### Next Steps -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. Select an exploit below. +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (Recommended) - -This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. - -This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. - -Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### Installing boot9strap (unSAFE_MODE) +#### unSAFE_MODE (Recommended) This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present in all 3DS units. -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt b/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt index c52358c707..9fe4128dfb 100644 --- a/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt +++ b/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ title: "BannerBomb3 + Fredtool（仅港台版）" 一旦你得到了 DSiWare 备份，我们将把一个写入了漏洞的 DSiWare 程序注入到“DS 下载通信”程序中，用来安装自制固件。 -这些操作**仅限**港台版主机使用！（系统版本号末尾为 T ，如 11.15.0-39T） 如果你的主机不是这个区域的，则请使用[其他的方法](seedminer#下一步)。 +这些操作**仅限**港台版主机使用！（系统版本号末尾为 T ，如 11.16.0-39T） 如果你的主机不是这个区域的，则请使用[其他的方法](seedminer#下一步)。 {: .notice--warning} ### 你需要准备点啥？ diff --git a/_pages/zh_CN/bannerbomb3.txt b/_pages/zh_CN/bannerbomb3.txt index d0a8a7a713..cd5b5bed3c 100644 --- a/_pages/zh_CN/bannerbomb3.txt +++ b/_pages/zh_CN/bannerbomb3.txt @@ -13,7 +13,7 @@ title: "BannerBomb3" 这些操作可在美、欧、日、韩版的主机上工作，你可通过系统版本号末尾的 U，E，J，K 字符来区分主机版本。 如果你的主机是港台版的（系统版本号末尾以 T 结尾），请使用[这个方法](bannerbomb3-fredtool-(twn))；不要使用本页的方法。 -{: ..notice--warning} +{: .notice--warning} ### 你需要准备点啥？ diff --git a/_pages/zh_CN/faq.txt b/_pages/zh_CN/faq.txt index 6f17a945b1..052a4bed71 100644 --- a/_pages/zh_CN/faq.txt +++ b/_pages/zh_CN/faq.txt @@ -4,11 +4,12 @@ title: "常见问题" {% include toc title="目录"%} {% capture notice-6 %} -**3DS 最新的系统固件版本为 11.15.0** 。 以下是一些你应该知道的事情： +**3DS的系统固件已于最近更新至11.16.0**。 以下是一些你应该知道的事情： -- 如果你的主机正在使用的 Luma 版本为 **10.2.1 及以上**的，那么升级系统是 **100%** 安全的。 -- 如果你的主机运行的 Luma 低于此版本，则你应该在更新系统到 11.15.0 前先[更新 Luma](restoring-updating-cfw)。 -- 据目前所知，本次更新没有任何自制程序受到影响。 如果一个自制程序可以在 11.14.0（或以下）版本中正常运行，那么升级之后它也是可以照常使用的。 +- 如果你的主机正在使用的 Luma 版本为 **11.0**，那么升级系统是 **100%** 安全的。 你可以在关机状态下按住 SELECT 键，然后按下电源键开机以检查主机的 Luma 版本。 +- 如果你的主机运行的 Luma 低于此版本，则你应该在更新系统到 11.16.0 前先[更新 Luma](checking-for-cfw)。 +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest)（用于运行 PLG 插件和无线串流）需要等待其适配更新后才能在 11.16.0 上运行。 如果你需要使用这个工具，则建议等待其更新后再升级主机至 11.16.0。 +- 如果你的主机还没安装好自制固件，则你可以继续安装它且不需要任何额外的外设，不过推荐的方法有所更改。 {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "常见问题" ## 破解前的常见问题 #### **问：我的主机系统是最新版， 是否可以在不使用任何外设的情况下破解？** -**答：**可以！ 最新的系统固件（11.15.0）有 [Seedminer](seedminer) 方法可以用来破解。 +**答：**可以！ 最新的系统固件（11.16.0）可以用 [Seedminer](seedminer) 进行破解。 #### **问：这个手册里面的内容可以用来给什么型号的主机破解？** **答：**目前所有已零售的 3DS、3DS XL/LL、2DS、New 3DS、New 3DS XL/LL 和 New 2DS XL/LL。 如果你主机的系统版本显示为 “0.0.0-0”，则你的主机可能是开发机，不适用本手册。 diff --git a/_pages/zh_CN/get-started.txt b/_pages/zh_CN/get-started.txt index 11c77f865a..bcfcca1f1f 100644 --- a/_pages/zh_CN/get-started.txt +++ b/_pages/zh_CN/get-started.txt @@ -19,12 +19,12 @@ title: "新手入门" #### 第二步 — 检查系统版本 1. 打开系统设置（本体設定 / System Settings） -1. 你主机当前的系统版本将会显示在上屏的右下角（例如 “Ver. 11.15.0-47U”） +1. 你主机当前的系统版本将会显示在上屏的右下角（例如 “Ver. 11.16.0-48U”） #### 第三步 – 选一个方法 根据下面的版本表格，选择一个与你主机当前情况匹配的一个方法。 需要注意的一些事： - + 下面的表格**包含**中间版本。 举个例子：“从 11.4.0 到 11.14.0” 包括 11.4.0、11.14.0 以及这两个版本之间所有的版本。 + + 下面的表格**包含**中间版本。 举个例子：“从 11.4.0 到 11.15.0” 包括 11.4.0、11.15.0 以及这两个版本之间所有的版本。 + 系统版本号不是十进制的。 也就是说，11.10.0 比 11.3.0 更新，因此无法使用 Soundhax 进行破解。 + 系统版本后的数字和字母不重要。 + 无论你选择哪种方法，最后都会得到一样的结果（boot9strap + 安装了 Luma3DS 自制固件的最新版本系统） @@ -42,11 +42,11 @@ title: "新手入门" - 11.15.0（最新版） + 11.16.0（最新版） Seedminer - 从 11.4.0 到 11.14.0 + 从 11.4.0 到 11.15.0 通过系统设置更新你的 3DS 到最新版本 @@ -63,6 +63,5 @@ title: "新手入门" 以下方法需要一些外设才能进行： -1. [安装 boot9strap（通过 kartdlphax）](installing-boot9strap-(kartdlphax)) - 需要一台已经破解了的 3DS，且安装了马里奥赛车 7 1. [ntrboot](ntrboot) - 需要兼容的 DS 烧录卡 1. [安装 boot9strap（通过硬件修改）](installing-boot9strap-(hardmod)) - 需要焊接工具 diff --git a/_pages/zh_CN/home.txt b/_pages/zh_CN/home.txt index 81c9143a84..fde85fd52c 100644 --- a/_pages/zh_CN/home.txt +++ b/_pages/zh_CN/home.txt @@ -9,6 +9,17 @@ header: excerpt: "最完整的 3DS 破解手册，
教你从原版主机破解成boot9strap。
" --- +{% capture notice-6 %} +**3DS 的系统固件已于最近更新至 11.16.0**。 以下是一些你应该知道的事情： + +- 如果你的主机正在使用的 Luma 版本为 **11.0**，那么升级系统是 **100%** 安全的。 你可以在关机状态下按住 SELECT 键，然后按下电源键开机以检查主机的 Luma 版本。 +- 如果你的主机运行的 Luma 低于此版本，则你应该在更新系统到 11.16.0 前先[更新 Luma](checking-for-cfw)。 +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest)（用于运行 PLG 插件和无线串流）需要等待其适配更新后才能在 11.16.0 上运行。 如果你需要使用这个工具，则建议等待其更新后再升级主机至 11.16.0。 +- 如果你的主机还没安装好自制固件，则你可以继续安装它且不需要任何额外的外设，不过推荐的方法有所更改。 +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ 请在开始操作前仔细阅读所有步骤页面（包括这个页面）。 {: .notice--info} diff --git a/_pages/zh_CN/installing-boot9strap-(fredtool).txt b/_pages/zh_CN/installing-boot9strap-(fredtool).txt index 2a3bc5f267..75b4fae6ff 100644 --- a/_pages/zh_CN/installing-boot9strap-(fredtool).txt +++ b/_pages/zh_CN/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "安装 Boot9strap（通过 Fredtool）" ### 重要事项 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + 本章节 Seedminer 将使用你的 `movable.sed` 文件来解密所有的 DSiWare 程序，以便在3DS中内置的 DS 网络设定中注入修改后的 DSiWare 程序。 这个操作需要你有任何的 DSiWare 备份，比如 BannerBomb 或 DSiWare Dumper 工具导出的。 本教程是使用 “FIRM partitions known-plaintext” 漏洞来进行破解的， 欲知相关资料请查阅[这里](https://www.3dbrew.org/wiki/3DS_System_Flaws)。 diff --git a/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt b/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt index 143cf7fa43..8da3dbef58 100644 --- a/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt +++ b/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "安装 boot9strap（通过 kartdlphax）" ### 重要事项 +此页所述的方法暂时无法在最新系统固件（11.16.0）上使用。 如果你被引导到了这个页面，则请返回重新查阅 [新手入门](get-started) 页面，或是加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 +{: .notice--warning} + kartdlphax 是马里奥赛车 7 中下载通信模式中的一个漏洞。 它可以与 universal-otherapp 一起使用，在目标设备上安装自制固件。 如果你想通过此方法安装自制固件，则你需要： diff --git a/_pages/zh_CN/installing-boot9strap-(pichaxx).txt b/_pages/zh_CN/installing-boot9strap-(pichaxx).txt index 5992262c75..da7442cbe7 100644 --- a/_pages/zh_CN/installing-boot9strap-(pichaxx).txt +++ b/_pages/zh_CN/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "安装 boot9strap（通过 PicHaxx）" ### 重要事项 +此页所述的方法暂时无法在最新系统固件（11.16.0）上使用。 如果你被引导到了这个页面，则请返回重新查阅 [Seedminer](Seedminer) 页面，或是加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 +{: .notice--warning} + 此方法使用 Seedminer 来取得你的 `movable.sed` 文件进行更进一步的漏洞利用，将为《宝可梦：绘图方块》（Pokémon Picross）自制的存档写入游戏，然后利用 universal-otherapp 启动 SafeB9SInstaller。 这个操作会覆盖《宝可梦：绘图方块》中的游戏存档。 如果你想保留你的游戏存档，则你应该在覆盖前备份 `00000001.sav` 文件。 diff --git a/_pages/zh_CN/seedminer.txt b/_pages/zh_CN/seedminer.txt index dfe57ae8f0..4423f9a7d6 100644 --- a/_pages/zh_CN/seedminer.txt +++ b/_pages/zh_CN/seedminer.txt @@ -59,25 +59,14 @@ ___ ### 下一步 -一旦得到了你主机的加密密钥（`movable.sed`）后，你将需要选一个方法使用它来触发 3DS 系统漏洞，并利用漏洞来安装自制固件。 请选择以下列出的其一方法。 +一旦得到了你主机的加密密钥（`movable.sed`）后，你将需要选一个方法使用它来触发 3DS 系统漏洞，并利用漏洞来安装自制固件。 -#### PicHaxx + universal-otherapp（推荐） - -此方法利用由 Seedminer 取得的 `movable.sed` 文件，把为《宝可梦：绘图方块》（Pokémon Picross）自制的存档写入游戏，然后利用 universal-otherapp 安装自制固件。 - -此方法需要《宝可梦：绘图方块》（Pokémon Picross，可在 eShop 中免费下载），所以只有能够访问 eShop 且主机区域为美版、欧版或日版的主机才能做这个。 - -继续至[安装 boot9strap（通过 Pichaxx）](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### 安装 boot9strap（通过 unSAFE_MODE） +#### unSAFE_MODE（推荐） 这种将使用 Seedminer 进行进一步破解的方法使用了你的 `movable.sed` 来利用所有机型都有的 SAFE_MODE 固件来进行破解系统。 -仅当你因为一些原因无法使用 PicHaxx + universal-otherapp 方法时（如韩版 3DS 或无法进入 eShop 时），才建议使用此方法。 - 继续至[安装 boot9strap（通过 USM）](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ diff --git a/_pages/zh_TW/bannerbomb3-fredtool-(twn).txt b/_pages/zh_TW/bannerbomb3-fredtool-(twn).txt index 0609163a5f..b8922fa359 100644 --- a/_pages/zh_TW/bannerbomb3-fredtool-(twn).txt +++ b/_pages/zh_TW/bannerbomb3-fredtool-(twn).txt @@ -12,7 +12,7 @@ title: "BannerBomb3 + Fredtool (僅限臺版主機)" Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware. -以下指南**僅限**台灣版主機(系統版本號的結尾為 T 的主機，如 11.15.0-39T)！ 如果您的主機為其他區域的主機，請使用[其他方式](seedminer#next-steps) 進行改機。 +These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! 如果您的主機為其他區域的主機，請使用[其他方式](seedminer#next-steps) 進行改機。 {: .notice--warning} ### 必備項目 diff --git a/_pages/zh_TW/bannerbomb3.txt b/_pages/zh_TW/bannerbomb3.txt index 153bc657cd..5da926c8cb 100644 --- a/_pages/zh_TW/bannerbomb3.txt +++ b/_pages/zh_TW/bannerbomb3.txt @@ -13,7 +13,7 @@ title: "BannerBomb3" 這些操作在美、歐、日、韓版可用，可透過系統版本號末尾的 「U、E、J、K」 字元來辨別。 如果您的主機為台灣版主機(系統版本號以 T 結尾的主機)，請見[此頁面](bannerbomb3-fredtool-(twn))。 -{: ..notice--warning} +{: .notice--warning} ### 必備項目 diff --git a/_pages/zh_TW/faq.txt b/_pages/zh_TW/faq.txt index cbf9126264..d516b25704 100644 --- a/_pages/zh_TW/faq.txt +++ b/_pages/zh_TW/faq.txt @@ -4,11 +4,12 @@ title: "常見問題 FAQ" {% include toc title="條目內容" %} {% capture notice-6 %} -**The latest 3DS firmware is 11.15.0**. 以下是你該知道的： +**3DS firmware 11.16.0 was recently released**. 以下是你該知道的： -- If your device is running *Luma 10.2.1 or newer*, it is *100% safe* to update. -- 如果你的主機運行的 Luma 低於此版本，則你應該在更新系統到 11.15.0 前先[更新 Luma](restoring-updating-cfw)。 -- 據目前所知，本次更新沒有任何自製程式受到影響。 They will work as they did on 11.14.0 and earlier. +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. {% endcapture %}
{{ notice-6 | markdownify }}
@@ -16,7 +17,7 @@ title: "常見問題 FAQ" ## Pre-Installation FAQ #### **Q:** *I am on the latest system version. 是否可以在不使用任何外部設備的情況下進行破解？ ** -**A:** 可以的！ 最新的系統韌體(11.15.0)有 [Seedminer](seedminer) 方法可以用來破解。 +**A:** 可以的！ The latest firmware (11.16.0) has a free method for getting CFW named [Seedminer](seedminer). #### **Q:** *What devices is this guide compatible with?* **A: **目前所有已零售的 3DS、3DS XL/LL、2DS、New 3DS、New 3DS XL/LL 和 New 2DS XL/LL 皆可正常破解。 如果你主機的系統版本顯示為「0.0.0-0」，您的主機可能是開發專用主機，不適用本手冊。 diff --git a/_pages/zh_TW/get-started.txt b/_pages/zh_TW/get-started.txt index 7d10cd1d3a..50094b69a8 100644 --- a/_pages/zh_TW/get-started.txt +++ b/_pages/zh_TW/get-started.txt @@ -19,12 +19,12 @@ If you see an unusual menu, STOP - you already have custom firmware! Continue fr #### 第二節 — 檢查系統版本 1. 開啟系統設定 -1. Your system version will be displayed on the bottom right of the top screen (e.g. 『Ver. 11.15.0-47U") +1. Your system version will be displayed on the bottom right of the top screen (e.g. 『Ver. 11.16.0-48U") #### 第三節 — 選擇改機方式 Use the version table below to select a method. A few things to note: - + The version table below is *inclusive*. 比方說，『從 11.4 到 11.14.0』，包括著11.4.0版、11.14.0版、以及任何中間的版本。 + + The version table below is *inclusive*. For example, "from 11.4.0 to 11.15.0" includes 11.4.0, 11.15.0, and all versions in between. + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax. + The number and letter after the system version are not important. + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware). @@ -42,11 +42,11 @@ Use the version table below to select a method. A few things to note: - 11.15.0 (最新版本) + 11.16.0 (latest version) Seedminer - 11.4.0 至 11.14.0 + 11.4.0 to 11.15.0 透過系統設定將您的 3DS 更新至最新版本 @@ -63,6 +63,5 @@ Use the version table below to select a method. A few things to note: 雖然說有適用於任何版本的改機方式，但這些方式都得用額外硬體才能達成。 -1. [安裝 boot9strap (透過 kartdlphax)](installing-boot9strap-(kartdlphax)) - 需要一台已改機過的 3DS 以及馬力歐賽車 7 (Mario Kart 7) 1. [ntrboot](ntrboot) - 需備有相容的 DS 燒錄卡 1. [安裝 boot9strap (透過硬改)](installing-boot9strap-(hardmod)) - 需要焊接 diff --git a/_pages/zh_TW/home.txt b/_pages/zh_TW/home.txt index 8537211157..ff7cf244b1 100644 --- a/_pages/zh_TW/home.txt +++ b/_pages/zh_TW/home.txt @@ -9,6 +9,17 @@ header: excerpt: "最完整的 3DS 改機教戰手冊，
教您如何從原廠主機改成 boot9strap。
" --- +{% capture notice-6 %} +**3DS firmware 11.16.0 was recently released**. 以下是你該知道的： + +- If your device is running *Luma 11.0*, it is *100% safe* to update. You can check your Luma version by holding (Select) while booting your device. +- If your device is on an older Luma version, you should [update Luma](checking-for-cfw) before you update your device to 11.16.0. +- [BootNTR Selector](https://github.com/Nanquitas/BootNTR/releases/latest) (used for running PLG plugins and wireless streaming) will need to be updated before it will work on 11.16.0. If you use it, you may want to wait for it to be updated before you update your device to 11.16.0. +- If your device does not yet have custom firmware, you can still install it on this version for free without any additional hardware, but the recommended method has been changed. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ 請在繼續前讀完所有的前言頁面 (包括本頁！)。 {: .notice--info} diff --git a/_pages/zh_TW/installing-boot9strap-(fredtool).txt b/_pages/zh_TW/installing-boot9strap-(fredtool).txt index eccd8f2e9d..62812c4743 100644 --- a/_pages/zh_TW/installing-boot9strap-(fredtool).txt +++ b/_pages/zh_TW/installing-boot9strap-(fredtool).txt @@ -6,6 +6,9 @@ title: "安裝 Boot9strap (透過 Fredtool)" ### 必讀事項 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + Seedminer 將透過您的 `movable.sed` 檔案來解密您主機上任何 DSiWare 的程式，以便在 DS 網路設定中注入修改後的 DSiWare 程式。 這需要您有 DSiWare 的 備份檔，比如利用 BannerBomb 或 DSiWare Dumper 工具導出的。 此方法是透過『FIRM partitions known-plaintext』漏洞所達成的。詳情請見[此](https://www.3dbrew.org/wiki/3DS_System_Flaws)。 diff --git a/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt b/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt index c00c87d7f2..2635f83a42 100644 --- a/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt +++ b/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt @@ -6,6 +6,9 @@ title: "安裝 boot9strap (透過 kartdlphax)" ### 必讀事項 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Get Started](get-started) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + kartdlphax 是瑪莉歐賽車 7 中下載通信模式中的一個漏洞。 它可以與 universal-otherapp 一起使用，在主機上安裝自製韌體。 如果你想通過此方法安裝自製韌體，則你需要： diff --git a/_pages/zh_TW/installing-boot9strap-(pichaxx).txt b/_pages/zh_TW/installing-boot9strap-(pichaxx).txt index dac6feca39..ee041a1601 100644 --- a/_pages/zh_TW/installing-boot9strap-(pichaxx).txt +++ b/_pages/zh_TW/installing-boot9strap-(pichaxx).txt @@ -6,6 +6,9 @@ title: "安裝 boot9strap (透過 PicHaxx)" ### 必讀事項 +The instructions on this page do not currently work on the latest firmware (11.16.0). If you were directly linked to this page, [return to Seedminer](Seedminer) or join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + 此方法將透過 Seedminer 來取得您主機特有的 `movable.sed` 檔案以建立一個修改後的『精靈寶可夢：繪圖方塊 (Pokémon Picross)』存檔，然後透過它啟動 universal-otherapp，並運行 SafeB9SInstaller。 This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your `00000001.sav` file before overwriting it. diff --git a/_pages/zh_TW/installing-boot9strap-(usm).txt b/_pages/zh_TW/installing-boot9strap-(usm).txt index db5613e1ae..2eb86a9c61 100644 --- a/_pages/zh_TW/installing-boot9strap-(usm).txt +++ b/_pages/zh_TW/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a 這些操作在美、歐、日、韓版可用，可透過系統版本號末尾的 「U、E、J、K」 字元來辨別。 -如果你的「L/R」鍵、「上」鍵、「A」鍵中的其中一個按鍵壞了，那您將得使用[另類的 Seedminer](bannerbomb3) 才能繼續。 若您需要幫助，請加入 [Discord 上的 Nintendo Homebrew 伺服器](https://discord.gg/MWxPgEp) 並使用英文求助。 +If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will need to follow [an alternate branch of Seedminer](bannerbomb3). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. {: .notice--warning} ### 必備項目 diff --git a/_pages/zh_TW/seedminer.txt b/_pages/zh_TW/seedminer.txt index 7fe1947e18..f1abacadd3 100644 --- a/_pages/zh_TW/seedminer.txt +++ b/_pages/zh_TW/seedminer.txt @@ -59,31 +59,20 @@ ___ ### 下一步 -Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. 請選擇以下列出的其一方法。 +Once you have your device's encryption key (`movable.sed`), you will use it in conjunction with other exploits to install custom firmware on your 3DS. -#### PicHaxx + universal-otherapp (推薦) - -此方法將透過 Seedminer 來取得您主機特有的 `movable.sed` 檔案以建立一個修改後的『精靈寶可夢：繪圖方塊 (Pokémon Picross)』存檔，然後透過它啟動 universal-otherapp 以安裝自製韌體。 - -本方法需要使用『寶可夢繪圖方塊 (Pokémon Picross)』(可於 eShop 上免費下載)；也就是說，您的主機必須為美版、歐版、或日版，且該主機得能正常存取 eShop。 - -繼續至[安裝 boot9strap (透過 PicHaxx)](installing-boot9strap-(pichaxx)) -{: .notice--primary} - -#### 安装 boot9strap(透過 unSAFE_MODE) +#### unSAFE_MODE (Recommended) 這種將使用 Seedminer 進行進一步破解的方法使用了你的 『movable.sed』 來利用所有機型都有的 SAFE_MODE 韌體來進行破解系統。 -This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS. - 繼續至[安裝 boot9strap (透過 USM)](installing-boot9strap-(usm)) -{: .notice--warning} +{: .notice--primary} ___ -#### 僅限台灣區機種 +#### Taiwan consoles only If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.** -繼續至 [BannerBomb3 + Fredtool (僅限台灣版主機)](bannerbomb3-fredtool-(twn)) +Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn)) {: .notice--warning} \ No newline at end of file