diff --git a/_pages/en_US/include/exploit-usm.txt b/_pages/en_US/include/exploit-usm.txt deleted file mode 100644 index fdaf1e39c2..0000000000 --- a/_pages/en_US/include/exploit-usm.txt +++ /dev/null @@ -1,14 +0,0 @@ -In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer. - -1. With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console - + Keep holding the buttons until the console boots into Safe Mode (a "system update" menu) -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png)) -1. If the exploit was successful, your console will have booted into SafeB9SInstaller - + If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section - + If your console instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card - + If you get a different error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-usm) \ No newline at end of file diff --git a/_pages/en_US/include/remove-usm-slottool.txt b/_pages/en_US/include/remove-usm-slottool.txt deleted file mode 100644 index 0664bf6baf..0000000000 --- a/_pages/en_US/include/remove-usm-slottool.txt +++ /dev/null @@ -1,17 +0,0 @@ -In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I. - -1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your console should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your console will then reboot diff --git a/_pages/en_US/installing-boot9strap-(kartdlphax).txt b/_pages/en_US/installing-boot9strap-(kartdlphax).txt index dd9fa7e56f..3c152499a4 100644 --- a/_pages/en_US/installing-boot9strap-(kartdlphax).txt +++ b/_pages/en_US/installing-boot9strap-(kartdlphax).txt @@ -113,7 +113,20 @@ You will **not** need to use your **source 3DS** to complete any further steps o #### Section V - unSAFE_MODE -{% include_relative include/exploit-usm.txt %} +In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer. + +1. With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console + + Keep holding the buttons until the console boots into Safe Mode (a "system update" menu) +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png)) +1. If the exploit was successful, your console will have booted into SafeB9SInstaller + + If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section + + If your console instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card + + If you get a different error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-usm) #### Section VI - Installing boot9strap @@ -124,7 +137,12 @@ You will **not** need to use your **source 3DS** to complete any further steps o #### Section VII - Restoring WiFi Configuration Profiles -{% include_relative include/remove-usm-slottool.txt %} +In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I. + +{% include_relative include/launch-hbl-dlp.txt %} +1. Launch slotTool from the list of homebrew +1. Select "RESTORE original wifi slots 1,2,3" +1. Your console will then reboot ___