diff --git a/_pages/af_ZA/finalizing-setup.txt b/_pages/af_ZA/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/af_ZA/finalizing-setup.txt
+++ b/_pages/af_ZA/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/af_ZA/flashing-ntrboot-(custom-firmware).txt b/_pages/af_ZA/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/af_ZA/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/af_ZA/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/af_ZA/installing-boot9strap-(ntrboot).txt b/_pages/af_ZA/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/af_ZA/installing-boot9strap-(ntrboot).txt
+++ b/_pages/af_ZA/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/af_ZA/ntrboot.txt b/_pages/af_ZA/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/af_ZA/ntrboot.txt
+++ b/_pages/af_ZA/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ar_SA/finalizing-setup.txt b/_pages/ar_SA/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/ar_SA/finalizing-setup.txt
+++ b/_pages/ar_SA/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/ar_SA/flashing-ntrboot-(custom-firmware).txt b/_pages/ar_SA/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/ar_SA/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/ar_SA/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/ar_SA/ntrboot.txt b/_pages/ar_SA/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/ar_SA/ntrboot.txt
+++ b/_pages/ar_SA/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ca_ES/finalizing-setup.txt b/_pages/ca_ES/finalizing-setup.txt
index 3025617429..993d1239fc 100644
--- a/_pages/ca_ES/finalizing-setup.txt
+++ b/_pages/ca_ES/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/ca_ES/flashing-ntrboot-(custom-firmware).txt b/_pages/ca_ES/flashing-ntrboot-(custom-firmware).txt
index a26cd7d34d..e6f426c952 100644
--- a/_pages/ca_ES/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/ca_ES/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
index 5de1b599ba..cc67b90f40 100644
--- a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/ca_ES/ntrboot.txt b/_pages/ca_ES/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/ca_ES/ntrboot.txt
+++ b/_pages/ca_ES/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/cs_CZ/finalizing-setup.txt b/_pages/cs_CZ/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/cs_CZ/finalizing-setup.txt
+++ b/_pages/cs_CZ/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/cs_CZ/flashing-ntrboot-(custom-firmware).txt b/_pages/cs_CZ/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/cs_CZ/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/cs_CZ/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/cs_CZ/ntrboot.txt b/_pages/cs_CZ/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/cs_CZ/ntrboot.txt
+++ b/_pages/cs_CZ/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/da_DK/finalizing-setup.txt b/_pages/da_DK/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/da_DK/finalizing-setup.txt
+++ b/_pages/da_DK/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/da_DK/flashing-ntrboot-(custom-firmware).txt b/_pages/da_DK/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/da_DK/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/da_DK/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/da_DK/installing-boot9strap-(ntrboot).txt b/_pages/da_DK/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/da_DK/installing-boot9strap-(ntrboot).txt
+++ b/_pages/da_DK/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/da_DK/ntrboot.txt b/_pages/da_DK/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/da_DK/ntrboot.txt
+++ b/_pages/da_DK/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/de_DE/finalizing-setup.txt b/_pages/de_DE/finalizing-setup.txt
index 0357a92d56..868263b73b 100644
--- a/_pages/de_DE/finalizing-setup.txt
+++ b/_pages/de_DE/finalizing-setup.txt
@@ -35,7 +35,6 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
1. Stecke deine SD-Karte in deinen Computer
1. Kopiere `FBI.3dsx` in den `/3ds/`-Ordner auf deiner SD-Karte
1. Erstelle einen Ordner namens `cias` im Stammverzeichnis deiner SD-Karte, falls er noch nicht existiert
-1. Erstelle einen Ordner mit dem Namen `hblauncherloader` im Stammverzeichnis deiner SD-Karte, falls er noch nicht existiert
1. Kopiere `hblauncher_loader.cia` aus der hblauncher_loader-`.zip` in den `/cias/`-Ordner auf deiner SD-Karte
1. Kopiere `lumaupdater.cia` in den `/cias/`-Ordner auf der SD-Karte
1. Kopiere `FBI.cia` in den `/cias/`Ordner auf der SD-Karte
diff --git a/_pages/de_DE/flashing-ntrboot-(custom-firmware).txt b/_pages/de_DE/flashing-ntrboot-(custom-firmware).txt
index 1d62609954..72f38684c9 100644
--- a/_pages/de_DE/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/de_DE/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/de_DE/installing-boot9strap-(ntrboot).txt b/_pages/de_DE/installing-boot9strap-(ntrboot).txt
index 2568dce5dd..719c848ab6 100644
--- a/_pages/de_DE/installing-boot9strap-(ntrboot).txt
+++ b/_pages/de_DE/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Schalte deinen 3DS aus
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. Wenn der Exploit erfolgreich war, wird nun direkt zum SafeBS9Installer gebootet
diff --git a/_pages/de_DE/ntrboot.txt b/_pages/de_DE/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/de_DE/ntrboot.txt
+++ b/_pages/de_DE/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/el_GR/finalizing-setup.txt b/_pages/el_GR/finalizing-setup.txt
index bb98bc454c..7388d6eeff 100644
--- a/_pages/el_GR/finalizing-setup.txt
+++ b/_pages/el_GR/finalizing-setup.txt
@@ -35,7 +35,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Δημιουργήστε έναν φάκελο με το όνομα `cias` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ήδη
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Αντιγράψτε το αρχείο `hblauncher_loader.cia` από το hblauncher_loader `.zip` στον φάκελο `/cias/` της κάρτας SD
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/el_GR/flashing-ntrboot-(custom-firmware).txt b/_pages/el_GR/flashing-ntrboot-(custom-firmware).txt
index 9fe653c23e..3a53f9bc06 100644
--- a/_pages/el_GR/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/el_GR/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/el_GR/installing-boot9strap-(ntrboot).txt b/_pages/el_GR/installing-boot9strap-(ntrboot).txt
index 82a33fdd3f..3fb0d90731 100644
--- a/_pages/el_GR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/el_GR/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/el_GR/ntrboot.txt b/_pages/el_GR/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/el_GR/ntrboot.txt
+++ b/_pages/el_GR/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/en_PT/finalizing-setup.txt b/_pages/en_PT/finalizing-setup.txt
index 18ab8e1448..75e0f4b091 100644
--- a/_pages/en_PT/finalizing-setup.txt
+++ b/_pages/en_PT/finalizing-setup.txt
@@ -35,7 +35,6 @@ Durin' 'tis process, we also setup programs such as th' followin':
1. Insert ye SD card into ye computer
1. Copy `FBI.3dsx` to th' `/3ds/` folder on ye SD card
1. Create a folder named `cias` on th' root 'o ye SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from th' hblauncher_loader `.zip` to th' `/cias/` folder on ye SD card
1. Copy `lumaupdater.cia` to th' `/cias/` folder on ye SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/en_PT/flashing-ntrboot-(custom-firmware).txt b/_pages/en_PT/flashing-ntrboot-(custom-firmware).txt
index c7210cd119..99d6fe5059 100644
--- a/_pages/en_PT/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/en_PT/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/en_PT/installing-boot9strap-(ntrboot).txt b/_pages/en_PT/installing-boot9strap-(ntrboot).txt
index 1ca8d7e6c5..fb1b2d1c6d 100644
--- a/_pages/en_PT/installing-boot9strap-(ntrboot).txt
+++ b/_pages/en_PT/installing-boot9strap-(ntrboot).txt
@@ -32,10 +32,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/en_PT/ntrboot.txt b/_pages/en_PT/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/en_PT/ntrboot.txt
+++ b/_pages/en_PT/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/es_ES/finalizing-setup.txt b/_pages/es_ES/finalizing-setup.txt
index 706299412e..353c5b4718 100644
--- a/_pages/es_ES/finalizing-setup.txt
+++ b/_pages/es_ES/finalizing-setup.txt
@@ -35,7 +35,6 @@ Durante este proceso, también instalaremos programas como los siguientes:
1. Inserta tu tarjeta SD en tu computadora
1. Copia `FBI.3dsx` a la carpeta `/3ds/` de tu tarjeta SD
1. Crea una carpeta llamada `cias` en la raíz de tu tarjeta SD, si aún no existe
-1. Crea una carpeta llamada `hblauncherloader` en la raíz de tu tarjeta SD si aún no existe
1. Copia el archivo `hblauncher_loader.cia` contenido en el `.zip` de hblauncher_loader a la carpeta`/cias/` en tu tarjeta SD
1. Copia `lumaupdater.cia` a la carpeta `/cias/` en tu tarjeta SD
1. Copia `FBI.cia` a la carpeta `/cias/` en tu tarjeta SD
diff --git a/_pages/es_ES/flashing-ntrboot-(custom-firmware).txt b/_pages/es_ES/flashing-ntrboot-(custom-firmware).txt
index 1ed5db8d0e..f46253d351 100644
--- a/_pages/es_ES/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/es_ES/flashing-ntrboot-(custom-firmware).txt
@@ -1,24 +1,23 @@
---
-title: "Flashing ntrboot (Custom Firmware)"
+title: "Flashear ntrboot (Custom Firmware)"
---
-Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+Antes de continuar, asegúrate de haber leído toda la información en [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Ten en cuenta que no podrás usar las funciones estándar de la flashcart mientras el exploit de ntrboot esté instalado en ella (excepto en el caso de la Acekard 2i, la cual sigue funcional *en sistemas 3DS con custom firmware ya instalado*). Hay pasos opcionales al final de las instrucciones de flasheo de ntrboot para eliminarlo del flashcart cuando termines.
-Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flasheo en un clon de flashcart podría dejarla **permanentemente inutilizable**. Esto es poco probable, pero sin embargo, sólo las flashcarts originales mencionadas son compatibles. Para reducir la posibilidad de recibir un clon, se recomienda que utilizar un sitio de confianza para comprar una flashcart (como [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
#### Qué necesitas
-* Your ntrboot compatible DS / DSi flashcart:
- + Either the Acekard 2i or R4i Gold 3DS RTS
-* Two 3DS family devices
- + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
- + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
-* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+* Tu flashcart de DS / DSi compatible con ntrboot:
+ + Acekard 2i o R4i Gold 3DS RTS
+* Dos consolas de la familia 3DS
+ + **3DS de origen**: la consola de la familia 3DS que ya tenga algún custom firmware (como boot9strap o arm9loaderhax)
+ + **3DS de destino**: la consola sin modificar
+* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(el archivo `ntr`; no el archivo `devkit`)*
+* La última versión de [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
#### Instrucciones
@@ -26,27 +25,27 @@ Note that in some rare circumstances, it may be possible for the flashing proces
1. Apaga **la 3DS de origen**
1. Inserta la tarjeta SD de **la 3DS de origen** en tu computadora
-1. Create a folder named `ntrboot` on the root of your SD card
-1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
-1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
-1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
-1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+1. Crea una carpeta llamada`ntrboot` en la raíz de tu tarjeta SD
+1. Copia `boot9strap_ntr.firm` y `boot9strap_ntr.firm.sha` desde el archivo `.zip` de bootstrap ntr a la carpeta `/ntrboot/` en tu tarjeta SD
+1. Copia el archivo `ntrboot_flasher.firm` desde el `.zip` de ntrboot_flasher a la carpeta `/luma/payloads` en la tarjeta SD de la **3DS de origen**
+1. Reinserta la tarjeta SD de la **3DS de origen** en la **3DS de origen**
+1. Inserta tu flashcart de DS / DSi compatible con ntrboot en la **3DS de origen**
-##### Section II - Flashing ntrboot
+##### Sección II - Flashear ntrboot
-1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
-1. Select "ntrboot_flasher"
-1. Select "Dump Flash"
+1. Inicia el menú de selección de payloads de Luma3DS manteniendo (Start) al encender la **3DS de origen**
+1. Selecciona "ntrboot_flasher"
+1. Selecciona "Dump Flash"
1. Espera hasta que se complete el proceso
1. Presiona (B) para volver al menú principal
-1. Select "Inject Ntrboot"
-1. Press (Y) to proceed
-1. Press (R) for retail unit ntrboot
+1. Selecciona "Inject Ntrboot"
+1. Presiona (Y) para continuar
+1. Presiona (R) para seleccionar retail unit ntrboot
1. Espera hasta que se complete el proceso
1. Presiona (B) para volver al menú principal
-1. Select "EXIT" to power off **the source 3DS**
+1. Selecciona "EXIT" para apagar la **3DS de origen**
___
-Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+Continúa a [Instalar boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/es_ES/flashing-ntrboot-(powersaves).txt b/_pages/es_ES/flashing-ntrboot-(powersaves).txt
index e2a38cf696..00a28819fb 100644
--- a/_pages/es_ES/flashing-ntrboot-(powersaves).txt
+++ b/_pages/es_ES/flashing-ntrboot-(powersaves).txt
@@ -1,5 +1,5 @@
----
-title: "Flashing ntrboot (Powersaves)"
----
-
-This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
+---
+title: "Flashear ntrboot (Powersaves)"
+---
+
+Este método aún no ha sido completado, por lo que ésta es sólo una página de relleno.
\ No newline at end of file
diff --git a/_pages/es_ES/get-started-(new-3ds).txt b/_pages/es_ES/get-started-(new-3ds).txt
index a48b1d5409..a6d43d72f9 100644
--- a/_pages/es_ES/get-started-(new-3ds).txt
+++ b/_pages/es_ES/get-started-(new-3ds).txt
@@ -4,7 +4,7 @@ title: "Comencemos (New 3DS)"
Selecciona la casilla apropiada para tu versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0.
-Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Actualmente, la versión del navegador es irrelevante para la New 3DS en esta guía.
+Adicionalmente, ten en cuenta que el último número de la versión de tu sistema (que está precedida por un guión) se refiere a la versión de tu navegador. Actualmente, la versión del navegador es irrelevante para la New 3DS en esta guía.
Para todas las versiones, también puedes [actualizar mediante cartucho](cart-update) a una versión superior de la misma columna para seguir esas instrucciones.
@@ -54,7 +54,7 @@ La versión de tu consola puede verse en la esquina inferior derecha de la panta
TODAS LAS VERSIONES
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requiere una flashcart compatible) or Instalar boot9strap (Hardmod)
(Requiere soldar) |
\ No newline at end of file
diff --git a/_pages/es_ES/get-started-(old-3ds).txt b/_pages/es_ES/get-started-(old-3ds).txt
index 4677378feb..9d06bcfe83 100644
--- a/_pages/es_ES/get-started-(old-3ds).txt
+++ b/_pages/es_ES/get-started-(old-3ds).txt
@@ -4,7 +4,7 @@ title: "Comencemos (Old 3DS)"
Selecciona la casilla apropiada para su versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Si la versión es -0 entonces no tienes navegador, mientras que cualquier número por encima de -0 indica que tienes el navegador instalado.
+Adicionalmente, ten en cuenta que las dos últimas columnas de la tabla se refieren al último número de tu versión (que corresponde con la versión del navegador instalada en el sistema). Si la versión es -0 entonces no tienes navegador, mientras que cualquier número por encima de -0 indica que tienes el navegador instalado.
En el caso de "5.0.0-0U" por ejemplo, escogerías la columna de "Sin Navegador" y la fila de 5.0.0 hasta 5.1.0 porque tu sistema está en una versión comprendida entre ese rango y no tienes navegador instalado.
@@ -89,7 +89,7 @@ Si actualizaste con un cartucho que contiene la versión 9.9.0 o superior *(Por
TODAS LAS VERSIONES
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requiere una flashcart compatible) or Instalar boot9strap (Hardmod)
(Requiere soldar) |
\ No newline at end of file
diff --git a/_pages/es_ES/get-started.txt b/_pages/es_ES/get-started.txt
index f635391a22..e7bccb6e86 100644
--- a/_pages/es_ES/get-started.txt
+++ b/_pages/es_ES/get-started.txt
@@ -2,7 +2,7 @@
title: "Comencemos"
---
-Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. En esta página podrás encontrar dónde comenzar con tu consola.
+Los diferentes modelos y versiones de consolas requerirán distintos pasos para completar la meta final de instalar Custom Firmware basado en boot9strap. En esta página podrás encontrar dónde comenzar con tu consola.
Haz clic en la imagen correspondiente a tu consola para ir a la página apropiada. Los colores de las consolas en la imagen pueden variar, pero fíjate bien en las posición de los botones y demás características, para asegurarte de que seleccionas el correcto.
diff --git a/_pages/es_ES/home.txt b/_pages/es_ES/home.txt
index b97f3945d4..cc39453c1f 100644
--- a/_pages/es_ES/home.txt
+++ b/_pages/es_ES/home.txt
@@ -37,7 +37,7 @@ En la mayoría de los casos, ejecutar homebrew en tu consola es 100% gratis usan
**Custom Firmware** ("CFW") te permite utilizar hacks más avanzados que el homebrew en el espacio del usuario no pueden utilizar fácilmente. Por ejemplo, los parches de firmas digitales te permiten instalar títulos no firmados que aparecen directamente en el Menú HOME.
-CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
+Un CFW puede ser instalado en cualquier consola con cualquier versión (pero puede requerir herramientas y accesorios adicionales en versiones superiores a la 11.3.0).
## ¿Qué se instalará con esta guía?
diff --git a/_pages/es_ES/installing-boot9strap-(dsiware).txt b/_pages/es_ES/installing-boot9strap-(dsiware).txt
index f74c59f4d0..93b79eb9c6 100644
--- a/_pages/es_ES/installing-boot9strap-(dsiware).txt
+++ b/_pages/es_ES/installing-boot9strap-(dsiware).txt
@@ -20,7 +20,7 @@ Uno de estos métodos sólo funciona con cuatro juegos específicos que ya no so
Ambos sistemas DEBEN ser de la misma región.
{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Las transferencias del sistema solo pueden hacerse una vez por semana por NNID.
+En ámbos casos, el NNID de la 3DS de origen se mantendrá en la 3DS de destino, ¡a menos que realices una transferencia de vuelta o llames a Nintendo (los detalles pueden ser encontrados en las instrucciones)! Las transferencias del sistema solo pueden hacerse una vez por semana por NNID.
{: .notice--danger}
___
diff --git a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt
index 5f888d642d..b76a297ad3 100644
--- a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt
@@ -13,9 +13,9 @@ Antes de proceder, asegúrate de leer todos los avisos y advertencias al [Instal
#### Qué necesitas
-* Two 3DS family devices
- + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the device on stock firmware *on 11.5.0*
+* Dos consolas de la familia 3DS
+ + **3DS de origen**: la consola ejecutando algún tipo de custom firmware (como boot9strap o arm9loaderhax) *en la última versión*
+ + **3DS de destino**: la consola sin modificar *en 11.5.0*
* Comprar (o ya poseer) e instalar un juego DSiWare compatible, desde la eShop en **la 3DS de origen**
+ Una copia pirata del juego **NO** funcionará
+ Para una lista de juegos compatibles, revisa la página [Instalar boot9strap (Lista de juegos DSiWare inyectables)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection-list).txt
index 1d57227d6f..a939846eee 100644
--- a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -8,7 +8,7 @@ La lista está ordenada por regiones en este orden: USA, EUR, JPN. Cada sección
Los códigos QR pueden ser escaneados pulsando (L + R) en el menú de inicio y luego pulsando el icono QR en la pantalla inferior.
-The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
+Los siguientes requisitos de tamaños existen porque el juego DSiWare y su hack no deben modificar sus respectivos tamaños para que la transferencia entre sistemas funcione correctamente, lo que significa que el juego DSiWare donante debe ser lo suficientemente grande para "encajar" en DSiWare hackeado.
{% capture notice-list %}
diff --git a/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt b/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt
index 9d02bfb30c..2cc42bf189 100644
--- a/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt
@@ -13,9 +13,9 @@ Antes de proceder, asegúrate de leer todos los avisos y advertencias al [Instal
#### Qué necesitas
-* Two 3DS family devices
- + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the device on stock firmware *on 11.5.0*
+* Dos consolas de la familia 3DS
+ + **3DS de origen**: la consola ejecutando algún tipo de custom firmware (como boot9strap o arm9loaderhax) *en la última versión*
+ + **3DS de destino**: la consola sin modificar *en 11.5.0*
* Ya poseer uno de los siguientes juegos DSiWare vulnerables (una copia pirata del juego **no** funcionará) en la **3DS de Origen**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt b/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt
index 3772fd406e..e140b249ba 100644
--- a/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt
@@ -19,8 +19,8 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía
+ Si *aún* arroja el error "PM INIT FAILED", prueba con la [versión r19 de safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+ Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar
1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
- + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
- + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
+ + Si al iniciar aparece el menú de configuración de Luma3DS en vez de SafeB9SInstaller, apaga tu consola y asegúrate de que el archivo `safehaxpayload.bin` existe en la raíz de tu tarjeta SD
+ + Si estás seguro de que el archivo `safehaxpayload.bin` existe en la raíz de tu tarjeta SD pero aún así al iniciar aparece el menú de configuración de Luma3DS, asegúrate de [tener habilitada la opción para mostrar extensiones de archivo](file-extensions-(windows))
##### Sección II - Instalar boot9strap
diff --git a/_pages/es_ES/installing-boot9strap-(ntrboot).txt b/_pages/es_ES/installing-boot9strap-(ntrboot).txt
index 5e70be5879..5164d1286a 100644
--- a/_pages/es_ES/installing-boot9strap-(ntrboot).txt
+++ b/_pages/es_ES/installing-boot9strap-(ntrboot).txt
@@ -1,11 +1,11 @@
---
-title: "Installing boot9strap (ntrboot)"
+title: "Instalar boot9strap (ntrboot)"
---
#### Qué necesitas
-* A magnet that triggers the sleep mode of your device (if using a folding style device)
-* Your ntrboot flashed flashcart
+* Un imán que activa el modo de espera de tu consola (si usas una consola con tapa)
+* Tu flashcart con ntrboot instalado
* La última versión de [SafeB9SInstaller]
(https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)*
@@ -18,7 +18,7 @@ title: "Installing boot9strap (ntrboot)"
1. Apaga tu consola
1. Inserta tu tarjeta SD en tu computadora
-1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Copia `SafeB9SInstaller.firm` a la raíz de tu tarjeta SD y renombra el archivo a `boot.firm`
1. Copia _el contenido de_ `starter.zip` a la raíz de tu tarjeta SD
1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD
@@ -29,27 +29,29 @@ title: "Installing boot9strap (ntrboot)"
1. Vuelve a insertar tu tarjeta SD en tu consola
1. Enciende tu consola
-##### Section II - ntrboot
+##### Sección II - ntrboot
-1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Usa el imán para encontrar el lugar de tu consola donde se activa el sensor del modo en espera
+ + Este paso no es necesario en la old 2DS (la cual tiene un interruptor de modo de espera)
1. Apaga tu consola
-1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
- + It may take a few attempts to get this to work because the positioning is awkward
+1. Inserta tu flashcart en tu consola
+1. Coloca el imán en tu consola para activar el sensor de modo de espera
+ + En la old 2DS, por otro lado, deberías activar el interruptor del modo de espera
+1. Mantén (Power) + (Start) + (Select) + (X) por varios segundos, luego suelta los botones
+ + Podría tomar varios intentos para que esto funcione ya que la ubicación es algo rara
1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
##### Sección III - Instalar boot9strap
1. Espera a que todos los controles de seguridad se completen
1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap
-1. Once it has completed, force your device to power off by holding down the power button
- + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+1. Una vez que haya terminado, fuerza el apagado de la consola manteniendo presionado el botón de apagado
+ + Tu consola sólo iniciará SafeB9SInstaller mientras no se haya completado la siguiente sección
##### Sección IV - Configurar Luma3DS
1. Inserta tu tarjeta SD en tu computadora
-1. Delete `boot.firm` from the root of your SD card
+1. Elimina `boot.firm` desde la raíz de tu tarjeta SD
1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD
1. Vuelve a insertar tu tarjeta SD en tu consola
1. Enciende tu consola
@@ -67,18 +69,18 @@ Continúa en [Finalizar instalación](finalizing-setup)
___
-##### Section V - Removing ntrboot
+##### Sección V - Quitar ntrboot
-This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+Esta es una sección opcional que te ayudará a restaurar tu flashcart a su estado original (que te permitirá usar su funcionalidad estándar).
{: .notice--info}
-Do not follow this section until you have completed the rest of the instructions on this page.
+No sigas esta sección mientras no hayas completado el resto de instrucciones de esta página.
{: .notice--warning}
-1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
-1. Select "ntrboot_flasher"
-1. Select "Restore Flash"
-1. Press (Y) to proceed
+1. Inicia el menú de selección de payloads de Luma3DS manteniendo (Start) al encender la **3DS de origen**
+1. Selecciona "ntrboot_flasher"
+1. Selecciona "Restore Flash"
+1. Presiona (Y) para continuar
1. Espera hasta que se complete el proceso
1. Presiona (B) para volver al menú principal
-1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
+1. Selecciona "EXIT" para apagar la **3DS de origen**
\ No newline at end of file
diff --git a/_pages/es_ES/ntr-and-cubic-ninja.txt b/_pages/es_ES/ntr-and-cubic-ninja.txt
index cdedc3408b..a7ff64b965 100644
--- a/_pages/es_ES/ntr-and-cubic-ninja.txt
+++ b/_pages/es_ES/ntr-and-cubic-ninja.txt
@@ -4,7 +4,7 @@ title: "NTR y Cubic Ninja"
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-NTR Cubic Ninja will work for JPN New 3DS ONLY!
+¡NTR Cubic Ninja sólo funciona para las New 3DS JPN!
{: .notice--warning}
#### Qué necesitas
diff --git a/_pages/es_ES/ntrboot.txt b/_pages/es_ES/ntrboot.txt
index 45750a7535..c573637a19 100644
--- a/_pages/es_ES/ntrboot.txt
+++ b/_pages/es_ES/ntrboot.txt
@@ -2,33 +2,33 @@
title: "ntrboot"
---
-If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+Si ya instalaste ntrboot en tu flashcart, ahora puedes seguir las instrucciones en [Instalar boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) para saber como usarlo.
{: .notice--success}
-Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+Instalar boot9strap con ntrboot requiere una flashcart de DS / DSi compatible con el flasheo de ntrboot. La lista actual de flashcarts compatibles es la siguiente:
+ [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
-There are two different methods of flashing ntrboot to your flashcart.
+Existen dos métodos diferentes para instalar ntrboot en tu flashcart.
-Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+Ámbos requieren que tengas un pequeño imán en el caso de que la consola objetivo sea del tipo plegable (cualquiera de la familia 3DS y que no sea la 2DS con un interruptor del modo de espera). Esto es porque el exploit requiere que tu consola entre al modo de espera pero teniendo acceso a los botones.
-To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+Para probar si un imán sirve, mantenlo en o alrededor de los botones (A)(B)(X)(Y) mientras la consola está encendida para ver si se activa el modo de espera. Si lo hace, ambas pantallas se apagarán mientras el imán se mantenga en esa posición.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Ten en cuenta que no podrás usar las funciones estándar de la flashcart mientras el exploit de ntrboot esté instalado en ella (excepto en el caso de la Acekard 2i, la cual sigue funcional *en sistemas 3DS con custom firmware ya instalado*). Hay pasos opcionales al final de las instrucciones de flasheo de ntrboot para eliminarlo del flashcart cuando termines.
-Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flasheo en un clon de flashcart podría dejarla **permanentemente inutilizable**. Esto es poco probable, pero sin embargo, sólo las flashcarts originales mencionadas son compatibles. Para reducir la posibilidad de recibir un clon, se recomienda utilizar un sitio de confianza para comprar una flashcart (como [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
___
{% capture notice-1 %}
-[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+[Flashear ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
-This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+Éste método requiere acceso temporal a una segunda consola que ya tenga algún custom firmware (como boot9strap o arm9loaderhax).
{% endcapture %}
@@ -36,9 +36,9 @@ This method requires temporary access to a second device that is already running
{% capture notice-1 %}
-[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+[Flashear ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
-This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+Éste método, una vez esté completo, requerirá acceso temporal a un [Powersaves](https://amzn.to/2fb3VY7). Este método aún no ha sido completado, por lo que ésta es sólo una página de relleno.
{% endcapture %}
diff --git a/_pages/es_ES/region-changing.txt b/_pages/es_ES/region-changing.txt
index e8f25360ca..e9874c2aae 100644
--- a/_pages/es_ES/region-changing.txt
+++ b/_pages/es_ES/region-changing.txt
@@ -4,7 +4,7 @@ title: "Cambio de Región"
Esta es una sección adicional para cambiar de región la SysNAND de tu CFW. Esto se hace instalando la imagen de CTRTransfer 9.2.0 para la región a la que quieras cambiar.
-Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
+Ten en cuenta que cambiar de región es casi totalmente innecesario ya que Luma3DS soporta juegos de distinta región y [emulación individual de la región del juego](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
@@ -16,14 +16,14 @@ Este proceso desvinculará tu NNID del sistema, puesto que ya no será compatibl
Después de este proceso, sólo las **New 3DS que nunca antes hayan tenido acceso a la eShop** y **cualquier Old 3DS** serán capaces de acceder a la eShop después de crear una nueva NNID en su nueva región. ¡Las New 3DS que cambien de región y que hayan accedido a la eShop en su región original, no pueden crear una nueva NNID y acceder a la eShop en su nueva región!
{: .notice--warning}
-Ten en cuenta que en ocasiones la eShop inexplicablemente no funcionará para las consolas en las que debería funcionar. Esto es causado por los servidores de Nintendo y realmente no tenemos ningún control sobre ello. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). La causa para esto es actualmente desconocida.
+Ten en cuenta que en ocasiones la eShop inexplicablemente no funcionará para las consolas en las que debería funcionar. Esto es causado por los servidores de Nintendo y realmente no tenemos ningún control sobre ello. Adicionalmente, ten en cuenta que ocasionalmente la eShop de forma inexplicable funcionará en algunas consolas en las que no debería (como algunas New 3DS). La causa para esto es actualmente desconocida.
Cambiar de región usando CTRTransfer (lo cual este método realiza) parece ser la causa de que algunos parches de reinicio dejen de funcionar. La causa de esto es desconocida, pero por ahora los usuarios de Old 3DS no podrán jugar juegos con modo de memoria extendida (como Monster Hunter, Super Smash Bros y Pokémon Sol/Luna) hasta que formateen sus consolas.
-Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
+Nunca formatees una New 2DS XL que esté en la versión inferior a 11.4.0 ¡o no podrás completar la configuración inicial!
{: .notice--danger}
-You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
+Ya DEBES tener instalado Luma3DS y boot9strap o arm9loaderhax para usar esto.
{: .notice--danger}
#### Qué necesitas
diff --git a/_pages/es_ES/site-navigation.txt b/_pages/es_ES/site-navigation.txt
index 8670984184..ee79e82e46 100644
--- a/_pages/es_ES/site-navigation.txt
+++ b/_pages/es_ES/site-navigation.txt
@@ -26,8 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Extensiones de archivos (Windows)](file-extensions-(windows))
+ [Finalizar Instalación](finalizing-setup)
-+ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
-+ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
++ [Flashear ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flashear ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Comencemos (New 3DS)](get-started-(new-3ds))
+ [Comencemos (Old 3DS)](get-started-(old-3ds))
+ [Comencemos](get-started)
diff --git a/_pages/es_ES/troubleshooting.txt b/_pages/es_ES/troubleshooting.txt
index 2d85fccfbe..7155d13450 100644
--- a/_pages/es_ES/troubleshooting.txt
+++ b/_pages/es_ES/troubleshooting.txt
@@ -5,7 +5,7 @@ title: "Resolución de Problemas"
Si no puedes encender tu consola, por favor, busca la sección correspondiente a tu problema y sigue las instrucciones. Una vez encuentres la solución que funcione para ti, puedes continuar con la guía principal
(Esta sección es muy larga. Prueba a usar Ctrl+F para buscar tu problema).
-If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
+Si aún no eres capaz de resolver el problema y necesitas ayuda, por favor, pega el contenido de todos los archivos .log que haya en la raíz de tu tarjeta SD en un [Gist](https://gist.github.com/) y regresa con una descripción detallada de tu problema y de lo que has intentado.
Para utilizar los enlaces [magnet](https://es.wikipedia.org/wiki/Magnet) de esta página, vas a necesitar un cliente torrent como [Deluge](http://dev.deluge-torrent.org/wiki/Download)
diff --git a/_pages/fi_FI/finalizing-setup.txt b/_pages/fi_FI/finalizing-setup.txt
index 241f679599..c11dace8ba 100644
--- a/_pages/fi_FI/finalizing-setup.txt
+++ b/_pages/fi_FI/finalizing-setup.txt
@@ -35,7 +35,6 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
1. Aseta SD-korttisi tietokoneeseesi
1. Kopioi `FBI.3dsx` SD-korttisi `/3ds/`-kansioon
1. Luo `cias`-niminen kansio SD-korttisi juureen, jos sitä ei jo ole olemassa
-1. Luo `hblauncherloader`-niminen kansio SD-korttisi juureen, jos sitä ei jo ole olemassa
1. Kopioi hblauncher_loader-`.zip`-pakkauksesta `hblauncher_loader.cia` SD-korttisi `/cias/`-kansioon
1. Kopioi `lumaupdater.cia` SD-korttisi `/cias/`-kansioon
1. Kopioi `FBI.cia` SD-korttisi `/cias/`-kansioon
diff --git a/_pages/fi_FI/flashing-ntrboot-(custom-firmware).txt b/_pages/fi_FI/flashing-ntrboot-(custom-firmware).txt
index 631f32228c..673fbdbd5d 100644
--- a/_pages/fi_FI/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/fi_FI/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Ntrbootin asentaminen (mukautettu laiteohjelmisto)"
Varmista ennen jatkamista, että olet lukenut kaikki [ntrbootia koskevat huomautukset](ntrboot).
-Huomaa, että flash-korttia ei voi käyttää sen normaaleihin käyttötarkoituksiin silloin, kun ntrboot on asennettuna sille. Osion lopussa on valinnaiset ohjeet, joiden avulla voit poistaa ntrbootin flash-kortiltasi asennettuasi boot9strapin.
-{: .notice--warning}
+Huomaa, että flash-korttia ei voi käyttää sen normaaleihin käyttötarkoituksiin silloin, kun ntrboot on asennettuna sille (lukuun ottamatta Acekard 2i -korttia, joka toimii edelleen normaalisti *3DS:llä, jossa on mukautettu laiteohjelmisto*). Osion lopussa on valinnaiset ohjeet, joiden avulla voit poistaa ntrbootin flash-kortiltasi asennettuasi boot9strapin.
Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **vioittaa** jäljitelmä-flash-korttia ja tehdä siitä pysyvästi käyttökelvottoman. Vaikka tämä onkin epätodennäköistä, on suositeltavaa käyttää vain alkuperäisiä kortteja. Jotta välttyisit jäljitelmäkortin saamiselta, on suositeltavaa käyttää flash-kortin ostamiseen hyvämaineista sivustoa (kuten [NDS Card](http://www.nds-card.com/)ia).
{: .notice--danger}
@@ -27,7 +26,7 @@ Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **
1. Sammuta **lähde-3DS**
1. Aseta **lähde-3DS**:n SD-kortti tietokoneeseesi
1. Luo `ntrboot`-niminen kansio SD-korttisi juureen
-1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+1. Kopioi ntr-`.zip`-pakkauksesta `boot9strap_ntr.firm` ja `boot9strap_ntr.firm.sha` SD-korttisi `/ntrboot/`-kansioon
1. Kopioi ntrboot_flasher-`.zip`-pakkauksesta `ntrboot_flasher.firm` **lähde-3DS**:n SD-kortin `/luma/payloads`-kansioon
1. Aseta **lähde-3DS**:n SD-kortti takaisin konsoliinsa
1. Aseta ntrboot-yhteensopiva DS-/DSi-flash-korttisi **lähde-3DS**:ään
@@ -41,7 +40,7 @@ Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **
1. Paina (B):tä palataksesi päävalikkoon
1. Valitse "Inject Ntrboot"
1. Paina (Y):tä jatkaaksesi
-1. Press (R) for retail unit ntrboot
+1. Paina (R):ää valitaksesi vaihtoehdon "retail unit ntrboot"
1. Odota, kunnes toiminto on suoritettu
1. Paina (B):tä palataksesi päävalikkoon
1. Valitse "EXIT" sammuttaaksesi **lähde-3DS**:n
diff --git a/_pages/fi_FI/get-started-(new-3ds).txt b/_pages/fi_FI/get-started-(new-3ds).txt
index b0eea3d980..16a09d40c5 100644
--- a/_pages/fi_FI/get-started-(new-3ds).txt
+++ b/_pages/fi_FI/get-started-(new-3ds).txt
@@ -4,7 +4,7 @@ title: "Aloitus (New 3DS)"
Valitse konsolisi versiota vastaava sivu alta löytyvästä listasta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0.
-Huomaa myös, että järjestelmäsi versionumeron viimeinen luku (jota edeltää yhdysmerkki) viittaa selaimesi versioon. Tällä hetkellä selaimen versiolla ei ole merkitystä New 3DS:n kannalta tässä oppaassa.
+Huomaa, että järjestelmäsi versionumeron viimeinen luku (jota edeltää yhdysmerkki) viittaa selaimesi versioon. Tällä hetkellä selaimen versiolla ei ole merkitystä New 3DS:n kannalta tässä oppaassa.
Kaikilla versioilla voit myös [korttipäivittää](cart-update) järjestelmäsi uudempaan versioon ja jatkaa ohjeiden seuraamista saman sarakkeen kohdalta.
diff --git a/_pages/fi_FI/get-started-(old-3ds).txt b/_pages/fi_FI/get-started-(old-3ds).txt
index 94f4b42482..914c858409 100644
--- a/_pages/fi_FI/get-started-(old-3ds).txt
+++ b/_pages/fi_FI/get-started-(old-3ds).txt
@@ -4,7 +4,7 @@ title: "Aloitus (vanha 3DS)"
Valitse konsolisi versiota vastaava sivu alta löytyvästä listasta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Jos versionumero on -0, järjestelmässäsi ei ole selainta. Mikä tahansa suurempi luku kuin -0 taas kertoo, että selain on asennettuna.
+Huomaa, että listan kaksi viimeistä saraketta viittaavat konsolisi versionumeron viimeiseen lukuun (joka vastaa järjestelmään asennetun selaimen versiota). Jos versionumero on -0, järjestelmässäsi ei ole selainta. Mikä tahansa suurempi luku kuin -0 taas kertoo, että selain on asennettuna.
Esimerkkinä: jos versionumerosi on "5.0.0-0U", sinun tulee seurata "Ei selainta" -saraketta sekä "versiosta 5.0.0 versioon 5.1.0" -riviä, koska järjestelmäsi versio on kyseisellä välillä, eikä siinä ole selainta asennettuna.
diff --git a/_pages/fi_FI/get-started.txt b/_pages/fi_FI/get-started.txt
index c7a3eda87a..a555ca3180 100644
--- a/_pages/fi_FI/get-started.txt
+++ b/_pages/fi_FI/get-started.txt
@@ -2,7 +2,7 @@
title: "Aloitus"
---
-Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Tämä sivu opastaa sinut konsolillesi sopivaan aloituskohtaan.
+Eri laitemallit, versiot ja alueet edellyttävät erilaisen prosessin saavuttaaksesi boot9strap-käyttöisen mukautetun laiteohjelmiston. Tämä sivu opastaa sinut konsolillesi sopivaan aloituskohtaan.
Napsauta konsolisi kuvaa päätyäksesi oikealle sivulle. Konsolien väritykset saattavat vaihdella, mutta kiinnitä huomiota painikkeiden sijaintiin sekä eri mallien ominaisuuksiin, jotta valitset varmasti oikean mallin.
diff --git a/_pages/fi_FI/home.txt b/_pages/fi_FI/home.txt
index 10d694d7af..a430521595 100644
--- a/_pages/fi_FI/home.txt
+++ b/_pages/fi_FI/home.txt
@@ -37,7 +37,7 @@ Useimmissa tapauksissa homebrew'n käyttäminen konsolillasi on täysin ilmaista
**Mukautettu laiteohjelmisto** (engl. custom firmware, "CFW") sallii kehittyneempiä hackejä, joihin ei käyttäjätilan homebrew'lla pysty. Esimerkkinä allekirjoitusten paikkaaminen, joka sallii sinun asentaa allekirjoittamattomia sovelluksia, jotka ilmestyvät suoraan HOME-valikkoosi.
-CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
+CFW:n voi asentaa millä tahansa konsolimallilla sekä millä tahansa versiolla (asennus saattaa vaatia lisätyökaluja 11.3.0:lla ja sitä uudemmilla versioilla).
## Mitä tässä oppaassa asennetaan?
diff --git a/_pages/fi_FI/installing-boot9strap-(dsiware).txt b/_pages/fi_FI/installing-boot9strap-(dsiware).txt
index dee5617261..aa5e87ab91 100644
--- a/_pages/fi_FI/installing-boot9strap-(dsiware).txt
+++ b/_pages/fi_FI/installing-boot9strap-(dsiware).txt
@@ -20,7 +20,7 @@ Kumpikin menetelmä vaatii [siirtosovelluksen (System Transfer)](https://www.nin
Kummankin laitteen TÄYTYY olla samalta alueelta.
{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Tiedonsiirron voi tehdä siirtosovelluksella vain kerran viikossa yhtä NNID:tä kohden.
+Kummassakin menetelmässä lähde-3DS:n NNID jää jumiin kohde-3DS:lle, ellet tee siirtoa takaisin tai soita Nintendolle (lisätietoja ohjeissa myöhemmin)! Tiedonsiirron voi tehdä siirtosovelluksella vain kerran viikossa yhtä NNID:tä kohden.
{: .notice--danger}
___
diff --git a/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection-list).txt
index 03a5c3d17c..e3e1ad5b71 100644
--- a/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/fi_FI/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -8,7 +8,7 @@ Tämä luettelo on kappalejaettu alueittain, järjestykseen USA, EUR, JPN. Jokai
QR-koodeja voi skannata käyttämällä painikeyhdistelmää (L + R) HOME-valikossa ja painamalla sitten alaruudun QR-kuvaketta.
-The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
+Kokovaatimukset on asetettu, koska injektoitava DSiWare-peli sekä sen hakkeroitu tallennus eivät saa muokata todellisen pelin ja tallennuksen tiedostokokoja, jotta siirto onnistuu. Tämä tarkoittaa sitä, että ostetun DSiWare-pelin tulee olla tarpeeksi suuri, jotta hakkeroitu DSiWare-peli mahtuu siihen.
{% capture notice-list %}
diff --git a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
index 488807404a..56fb8f1317 100644
--- a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
+++ b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Boot9strapin asentaminen (ntrboot)"
##### Vaihe II – Ntrboot
1. Käytä magneettia löytääksesi konsolistasi kohdan, jossa lepotilan anturi aktivoituu
- + Tämä ei ole tarpeen läpättömillä malleilla (vanha 2DS)
+ + Tämä ei ole tarpeen vanhalla 2DS:llä (jossa on erillinen kytkin lepotilalle)
1. Sammuta konsolisi
1. Aseta flash-korttisi konsoliisi
-1. Käynnistä konsolisi pitäen magneettia lepotilasensorin kohdalla (tai käyttämällä lepotilakytkintä läpättömillä malleilla) samalla, kun pidät pohjassa (START) + (SELECT) + (X) -painikeyhdistelmää
+1. Aseta magneetti konsolin päälle aktivoidaksesi lepotilan anturin
+ + Jos käytät 2DS:ää, käytä sen sijaan konsolin lepotilakytkintä
+1. Pidä pohjassa (POWER) + (START) + (SELECT) + (X) -painikeyhdistelmää useamman sekunnin ajan ja päästä ne sitten irti
+ Lepotilan aktivoiminen magneetilla saattaa vaatia useamman yrityksen, koska anturi on sijoitettu huonosti
1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua
diff --git a/_pages/fi_FI/ntr-and-cubic-ninja.txt b/_pages/fi_FI/ntr-and-cubic-ninja.txt
index cdc5a502f1..99742a5875 100644
--- a/_pages/fi_FI/ntr-and-cubic-ninja.txt
+++ b/_pages/fi_FI/ntr-and-cubic-ninja.txt
@@ -4,7 +4,7 @@ title: "NTR ja Cubic Ninja"
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
-NTR Cubic Ninja will work for JPN New 3DS ONLY!
+NTR & Cubic Ninja -menetelmä toimii VAIN JPN-alueen New 3DS:llä!
{: .notice--warning}
#### Tarpeet
diff --git a/_pages/fi_FI/ntrboot.txt b/_pages/fi_FI/ntrboot.txt
index 7c0914f0c0..f92b5e88dc 100644
--- a/_pages/fi_FI/ntrboot.txt
+++ b/_pages/fi_FI/ntrboot.txt
@@ -12,12 +12,12 @@ Boot9strapin asentaminen ntrbootin avulla vaatii yhteensopivan DS-/DSi-flash-kor
Ntrbootin asentamiseen flash-kortille on kaksi eri menetelmää.
-Kumpikin näistä menetelmistä vaatii pienen magneetin, jos kohdekonsoli on läpällinen (kaikki 3DS-perheen konsolit paitsi vanha 2DS, jossa on lepotilalle kytkin). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+Kumpikin näistä menetelmistä vaatii pienen magneetin, jos kohdekonsoli on läpällinen (kaikki 3DS-perheen konsolit paitsi vanha 2DS, jossa on lepotilalle kytkin). Tämä johtuu siitä, että menetelmän käyttäminen vaatii konsolin olevan lepotilassa samalla kun painikkeet ovat painettavissa.
-To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+Kokeillaksesi magneetin toimivuutta pidä sitä (A)-, (B)-, (X)- ja (Y)-painikkeiden päällä tai ympärillä konsolin ollessa käynnissä, jotta näet, aktivoituuko lepotila. Jos lepotila menee päälle, kummatkin ruudut ovat mustana niin kauan, kuin pidät magneettia kohdassa.
{: .notice--info}
-Huomaa, että flash-korttia ei voi käyttää sen normaaleihin käyttötarkoituksiin silloin, kun ntrboot on asennettuna sille. Osion lopussa on valinnaiset ohjeet, joiden avulla voit poistaa ntrbootin flash-kortiltasi asennettuasi boot9strapin.
+Huomaa, että flash-korttia ei voi käyttää sen normaaleihin käyttötarkoituksiin silloin, kun ntrboot on asennettuna sille (lukuun ottamatta Acekard 2i -korttia, joka toimii edelleen normaalisti *3DS:llä, jossa on mukautettu laiteohjelmisto*). Osion lopussa on valinnaiset ohjeet, joiden avulla voit poistaa ntrbootin flash-kortiltasi asennettuasi boot9strapin.
Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **vioittaa** jäljitelmä-flash-korttia ja tehdä siitä pysyvästi käyttökelvottoman. Vaikka tämä onkin epätodennäköistä, on suositeltavaa käyttää vain alkuperäisiä kortteja. Jotta välttyisit jäljitelmäkortin saamiselta, on suositeltavaa käyttää flash-kortin ostamiseen hyvämaineista sivustoa (kuten [NDS Card](http://www.nds-card.com/)ia).
{: .notice--danger}
@@ -28,7 +28,7 @@ ___
[Ntrbootin asentaminen (mukautettu laiteohjelmisto)](flashing-ntrboot-(custom-firmware))
-This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+Tämä menetelmä vaatii tilapäiseen käyttöön toisen konsolin, jolla on jo asennettuna jokin mukautettu laiteohjelmisto (kuten boot9strap tai arm9loaderhax).
{% endcapture %}
@@ -38,7 +38,7 @@ This method requires temporary access to a second device that is already running
[Ntrbootin asentaminen (Powersaves)](flashing-ntrboot-(powersaves))
-This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). Tämä on väliaikaissivu, johon on tulossa ohjeet ntrboothaxin asentamiseen Powersavesin avulla.
+Tämä menetelmä tulee valmistuessaan vaatiimaan [Powersaves](https://amzn.to/2fb3VY7)-laitteen tilapäiseen käyttöön. Tämä on väliaikaissivu, johon on tulossa ohjeet ntrboothaxin asentamiseen Powersavesin avulla.
{% endcapture %}
diff --git a/_pages/fi_FI/region-changing.txt b/_pages/fi_FI/region-changing.txt
index 68a4ee755a..5e22108ca4 100644
--- a/_pages/fi_FI/region-changing.txt
+++ b/_pages/fi_FI/region-changing.txt
@@ -4,7 +4,7 @@ title: "Alueen vaihtaminen"
Tämä lisäosio opastaa sinua vaihtamaan alueen CFW-SysNANDillasi. Tämä tapahtuu asentamalla sen alueen 9.2.0-CTRTransfer-näköistiedosto, johon haluat vaihtaa.
-Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
+Huomaa, että alueen vaihtaminen on lähes täysin tarpeetonta, koska Luma3DS tukee suoraan alueen ulkopuolisia pelejä sekä pelikohtaista [alueen emulointia](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
@@ -16,14 +16,14 @@ Tämä prosessi poistaa NNID:si linkityksen konsolistasi, koska se ei alueen vai
Tämän prosessin jälkeen ainoastaan **New 3DS:t, joilla ei ole koskaan käyty eShopissa** sekä **vanhat 3DS:t** pääsevät eShopiin, kun uusi NNID on luotu uudelle alueelle. Aluevaihdetut New 3DS:t, joilla on jo käyty eShopissa niiden alkuperäisellä alueella, eivät voi luoda uutta NNID:tä eivätkä pääse eShopiin!
{: .notice--warning}
-Huomaa, että toisinaan eShop ei syystä tai toisesta toimi edes niillä konsoleilla, joilla sen pitäisi. Tämä on täysin Nintendon palvelimien vika, enkä minä voi hallita niitä. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Syytä tälle ei tällä hetkellä tiedetä.
+Huomaa, että toisinaan eShop ei syystä tai toisesta toimi edes niillä konsoleilla, joilla sen pitäisi. Tämä on täysin Nintendon palvelimien vika, enkä minä voi hallita niitä. Joskus saattaa myös käydä toisinpäin: eli eShop voi toimia konsoleilla, joilla sen ei pitäisi (kuten jotkin New 3DS:t). Syytä tälle ei tällä hetkellä tiedetä.
Alueen vaihtaminen CTRTransferin (jota tämä menetelmä käyttää) avulla aiheuttaa uudelleenkäynnistyspaikkausten rikkoutumisen. Syytä tälle ei tiedetä, mutta toistaiseksi vanhan 3DS:n käyttäjät eivät voi pelata laajennetun muistitilan pelejä (kuten Monster Hunter, Super Smash Bros. ja Pokémon Sun/Moon) ennen konsolin alustamista.
-Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
+Älä koskaan alusta New 2DS XL:ää, jonka versio on 11.4.0 tai vanhempi, tai et pysty määrittämään alkuasetuksia loppuun asti!
{: .notice--danger}
-You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
+Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap tai arm9loaderhax käyttääksesi tätä ohjetta.
{: .notice--danger}
#### Tarpeet
diff --git a/_pages/fi_FI/site-navigation.txt b/_pages/fi_FI/site-navigation.txt
index c99cd06f63..d8f392c49f 100644
--- a/_pages/fi_FI/site-navigation.txt
+++ b/_pages/fi_FI/site-navigation.txt
@@ -26,8 +26,8 @@ sitemap: false
+ [UKK](faq)
+ [Tiedostotunnisteet (Windows)](file-extensions-(windows))
+ [Asennuksen viimeistely](finalizing-setup)
-+ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
-+ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
++ [Ntrbootin asentaminen (mukautettu laiteohjelmisto)](flashing-ntrboot-(custom-firmware))
++ [Ntrbootin asentaminen (Powersaves)](flashing-ntrboot-(powersaves))
+ [Aloitus (New 3DS)](get-started-(new-3ds))
+ [Aloitus (Old 3DS)](get-started-(old-3ds))
+ [Aloitus](get-started)
diff --git a/_pages/fi_FI/troubleshooting.txt b/_pages/fi_FI/troubleshooting.txt
index ee9257af01..841c436c66 100644
--- a/_pages/fi_FI/troubleshooting.txt
+++ b/_pages/fi_FI/troubleshooting.txt
@@ -5,7 +5,7 @@ title: "Vianmääritys"
Jos et pysty käynnistämään konsoliasi, seuraa tilannettasi vastaavan kohdan ohjeita. Kun jokin sivun ratkaisuista toimii ongelmaasi, voit jatkaa pääopasta
(Tämä osio on melko pitkä, kokeile Ctrl+F-näppäinyhdistelmää etsiäksesi ongelmasi.)
-If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
+Jos et saa ongelmaasi korjattua tämän osion avulla ja tarvitset apua, liitä SD-kortiltasi kaikki relevantit .log-tiedostot [gistiin](https://gist.github.com/) ja valmistaudu selittämään täsmällisesti ongelmasi sekä asiat, joita olet jo yrittänyt sen ratkaisemiseksi.
**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
diff --git a/_pages/fr_FR/finalizing-setup.txt b/_pages/fr_FR/finalizing-setup.txt
index 3cfe171f94..fd9fd9c374 100644
--- a/_pages/fr_FR/finalizing-setup.txt
+++ b/_pages/fr_FR/finalizing-setup.txt
@@ -35,7 +35,6 @@ Durant cette étape, nous allons également configurer les programmes suivants :
1. Insérez votre carte SD dans votre ordinateur
1. Copiez `FBI.3dsx` dans le dossier `/3ds/` de votre carte SD
1. Créez un dossier nommé `cias` à la racine de votre carte SD si celui ci n'existe pas
-1. Créez un dossier nommé `hblauncherloader` à la racine de votre carte SD si celui-ci n'existe pas déjà
1. Copiez le fichier `hblauncher_loader.cia` se trouvant dans le fichier hblauncher_loader`.zip` vers le répertoire `/cias/` de votre carte SD
1. Copiez `lumaupdater.cia` vers le dossier`/cias/` sur votre carte SD
1. Copiez `FBI.cia` vers le répertoire `/cias/` sur votre carte SD
diff --git a/_pages/fr_FR/flashing-ntrboot-(custom-firmware).txt b/_pages/fr_FR/flashing-ntrboot-(custom-firmware).txt
index 8c960248fe..8573f87f30 100644
--- a/_pages/fr_FR/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/fr_FR/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ titre: "Flasher ntrboot (Custom Firmware)"
Avant de commencez , assurez vous de connaître les informations sur [Ntrboot](ntrboot)
-Le linker ne pourra pas être utilisée dans sa fonction principale pendant que Ntrboot sera dessus . Des étapes facultatives se trouvent à la fin des instructions de flash Ntrboot , concernant la suppresion de l'exploit de votre Linker .
-{: .notice--warning}
+Notez que le Linker ne sera pas capable d’être utilisé pour ses fonctions standards, tandis que l’exploit de ntrboot est installé dessus (sauf dans le cas de l’Acekard 2i, qui reste fonctionnel *sur 3DS systèmes avec custom firmware installé seulement*). Des étapes facultatives se trouvent à la fin des instructions de flash Ntrboot , concernant la suppresion de l'exploit de votre Linker .
Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inutilsable . C'est peu probable , mais notez que seule les originaux fonctionnent avec Ntrboot . Pour réduire les chances d'avoir une contrefaçon utilisez ([NDS Card](http://www.nds-card.com/))
{: .notice--danger}
@@ -15,38 +14,38 @@ Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inu
* Votre ntrboot compatible DS / DSi flashcart :
+ L’Acekard 2i ou R4i Gold 3DS RTS
* Deux dispositifs de famille de 3DS
- + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
- + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
-* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+ ++ **La 3DS source**: La 3DS faisant tourner un Custom Firmware (comme boot9strap ou arm9loaderhax) *dans sa version la plus récente*
+ + **La 3DS cible**: la 3DS en firmware normal
+* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(ntr standard, pas le fichier `devkit`)*
+* La dernière version de [ntrboot_flasher] (https://github.com/kitling/ntrboot_flasher/releases/latest)
#### Instructions
-##### Section I - Prep Work
+##### Section I - Préparation
-1. Power off **the source 3DS**
-1. Insert **the source 3DS**'s SD card into your computer
-1. Create a folder named `ntrboot` on the root of your SD card
-1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
-1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
-1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
-1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+1. Éteignez **La 3DS source**
+1. Insérez la **carte SD de la 3DS source** dans votre ordinateur
+1. Créez un dossier appelé `ntrboot` à la racine de votre carte SD
+1. Copiez `boot9strap_ntr.firm` et `boot9strap_ntr.firm.sha depuis le fichier `.zip` de boot9strap ntr vers le dossier `/ntrboot/` sur votre carte SD
+1. Copiez `ntrboot_flasher.firm` de l'archive ntrboot_flasher `.zip` dans le dossier `/luma/payloads` sur **la carte SD de la 3DS source.**
+1. Réinsérez **de nouveau la carte SD de la source 3DS**
+1. Insérez votre linker DS dans *la 3DS source**
-##### Section II - Flashing ntrboot
+### Section II - Flasher ntrboot
-1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
-1. Select "ntrboot_flasher"
-1. Select "Dump Flash"
-1. Wait until the process is completed
-1. Press (B) to return to the main menu
-1. Select "Inject Ntrboot"
-1. Press (Y) to proceed
-1. Press (R) for retail unit ntrboot
-1. Wait until the process is completed
-1. Press (B) to return to the main menu
-1. Select "EXIT" to power off **the source 3DS**
+1. Démarrez le Luma3DS chainloader en maintenant (Start) pendant le démarrage **source 3DS**
+1. Selectionnez "ntrboot_flasher"
+1. Selectionnez "Dump Flash"
+1. Attendez que le processus soit terminé
+1. Appuyez sur (B) pour revenir au menu principal
+1. Selectionnez "Inject Ntrboot"
+1. Appuyer (Y) pour continuer
+1. Appuyer (R) pour ntrboot retail
+1. Attendez que le processus soit terminé
+1. Appuyez sur (B) pour revenir au menu principal
+1. Selectionnez "EXIT" pour éteindre **la source 3DS**
___
-Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+Continuer à [installation de boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/fr_FR/flashing-ntrboot-(powersaves).txt b/_pages/fr_FR/flashing-ntrboot-(powersaves).txt
index e2a38cf696..1c2064b0c7 100644
--- a/_pages/fr_FR/flashing-ntrboot-(powersaves).txt
+++ b/_pages/fr_FR/flashing-ntrboot-(powersaves).txt
@@ -1,5 +1,5 @@
----
-title: "Flashing ntrboot (Powersaves)"
----
-
-This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
+---
+title: "Flasher ntrboot (Powersaves)"
+---
+
+Cette méthode n'est pas encore publié , ceci est juste une page réservé .
\ No newline at end of file
diff --git a/_pages/fr_FR/get-started-(new-3ds).txt b/_pages/fr_FR/get-started-(new-3ds).txt
index ca27f781f5..db9570c736 100644
--- a/_pages/fr_FR/get-started-(new-3ds).txt
+++ b/_pages/fr_FR/get-started-(new-3ds).txt
@@ -4,7 +4,7 @@ title: "Bien Démarrer (New 3DS)"
Sélectionnez la page appropriée pour votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclue 9.0.0, 9.1.0 et 9.2.0.
-Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Actuellement, la version du navigateur n'a aucun rapport avec la New 3DS dans ce guide.
+Notez que les derniers chiffres de votre version système (qui sont précédés par un slash) réfèrent à votre version de navigateur. Actuellement, la version du navigateur n'a aucun rapport avec la New 3DS dans ce guide.
**Pour toutes les versions, vous pouvez également faire une [Mise à jour par Cartouche](cart-update) vers une version supérieure de la même colonne.**.
@@ -54,7 +54,7 @@ La version de votre console peut être trouvée en bas à droite de l'écran sup
TOUTES LES VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requise un Linker Compatible) ou Installer boot9strap (Hardmod)
(Requise de la soudure) |
\ No newline at end of file
diff --git a/_pages/fr_FR/get-started-(old-3ds).txt b/_pages/fr_FR/get-started-(old-3ds).txt
index 3916963c30..6edbff3939 100644
--- a/_pages/fr_FR/get-started-(old-3ds).txt
+++ b/_pages/fr_FR/get-started-(old-3ds).txt
@@ -4,7 +4,7 @@ title: "Bien Démarrer (Old 3DS)"
Sélectionnez la page appropriée à votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclut 9.0.0, 9.1.0 et 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Si votre version est -0, vous n'avez pas de navigateur internet installé, une version supérieure à -0 indique qu'un navigateur est installé.
+Les 2 dernières colonnes du tableau correspondent au dernier nombre de votre numéro de version (qui correspond à la version du navigateur de votre console). Si votre version est -0, vous n'avez pas de navigateur internet installé, une version supérieure à -0 indique qu'un navigateur est installé.
Dans le cas de "5.0.0-0U" par exemple, vous devez suivre la colonne "Sans navigateur" et la ligne "De 5.0.0 à 5.1.0" car le système est dans une version qui est dans cet intervalle et n'a pas de navigateur installé.
@@ -89,7 +89,7 @@ Si vous avez mis à jour avec une cartouche de jeu contenant la une version 9.9.
TOUTES LES VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requise un Linker Compatible) ou Installer boot9strap (Hardmod)
(Requise de la soudure) |
\ No newline at end of file
diff --git a/_pages/fr_FR/get-started.txt b/_pages/fr_FR/get-started.txt
index 82e459de42..71553e3d50 100644
--- a/_pages/fr_FR/get-started.txt
+++ b/_pages/fr_FR/get-started.txt
@@ -2,7 +2,7 @@
title: "Bien Démarrer"
---
-Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Cette page vous aidera à trouver par où commencer en fonction de votre console.
+Des consoles de modèles, de versions et/ou de régions différentes requièrent des étapes différentes pour atteindre l'objectif final d'un Custom Firmware basé sur boot9strap. Cette page vous aidera à trouver par où commencer en fonction de votre console.
Cliquez sur l'image qui correspond à votre console pour vous rendre à la page appropriée. Les couleurs des consoles dans l'image peuvent varier, mais notez le positionnement des boutons et les fonctionnalités de chaque console pour vous assurez que vous choisissez la bonne.
diff --git a/_pages/fr_FR/home.txt b/_pages/fr_FR/home.txt
index 0fcf94585c..08cdaef4de 100644
--- a/_pages/fr_FR/home.txt
+++ b/_pages/fr_FR/home.txt
@@ -37,7 +37,7 @@ Dans la plupart des cas, exécuter des homebrews sur votre appareil est 100 % gr
Un **Custom Firmware** ("CFW") vous permet d'utiliser des hacks plus avancés que les homebrew "userland" (ci-dessus) ne permettent pas. Par exemple, les patchs de signatures vous permettent d'installer des titres non signés directement sur votre menu HOME.
-CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
+CFW peut être installé sur n’importe quelle console sur n’importe quelle version (mais elles peuvent exiger des outils supplémentaires / accessoires pour les versions > 11.3.0).
## Qu'est-ce que ce guide me fait installer ?
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware).txt b/_pages/fr_FR/installing-boot9strap-(dsiware).txt
index a894327494..99a8fec730 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware).txt
@@ -20,7 +20,7 @@ Les deux méthodes exigent qui vous fassiez un [System Transfer](http://en-ameri
Les deux 3DS (ou 2DS) doivent ABSOLUMENT avoir chacun un logiciel venant de la même région (EUR, JAP, US...).
{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Les transferts de système ne peuvent seulement être faits une fois par semaine et par NNID.
+Dans les deux méthodes, le NNID (=Nintendo ID) de la "3DS source" va être coincé sur la "3ds qui reçoit" tant que vous ne referez pas un transfert de système ou que vous n'aurez pas appelé Nintendo ! Les transferts de système ne peuvent seulement être faits une fois par semaine et par NNID.
{: .notice--danger}
___
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
index c7584b99b0..81adc42c73 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
@@ -14,8 +14,8 @@ Si vous n'utilisez pas le bon `.firm` correspondant à la 3DS cible, vous allez
#### Ce dont vous aurez besoin
* Deux dispositifs de famille de 3DS
- + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the device on stock firmware *on 11.5.0*
+ + **La 3DS source**: La 3DS faisant tourner un Custom Firmware (comme boot9strap ou arm9loaderhax) *dans sa version la plus récente*
+ + **La 3DS cible**: la 3DS en firmware normal *en 11.5.0*
* Acheter (ou déjà posséder) un jeu DSiWare compatible sur l’eShop de ** la source 3DS **
+ Une copie piratée du jeu ne fonctionnera ** pas **
+ Pour obtenir la liste des jeux compatibles, consultez la page [Installer boot9strap (DSiWare Game Injection List)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt
index f6453da48b..68f8f3f7c9 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -8,7 +8,7 @@ Cette liste est découpé par région, dans l'ordre USA, EUR et JPN. Chaque sect
Les QR codes peuvent êtres scannés en appuyant sur (L + R) dans le menu principal de la 3DS, puis en appuyant sur l'icône QR sur l'écran du bas.
-The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
+La taille des fichiers est importante car le DSiWare injecté et sa sauvegarde hackée ne doivent pas avoir une tailles différente pour pouvoir être transférés correctement, donc le DSiWare "hôte" doit être assez gros pour contenir le DSiWare hacké.
{% capture notice-list %}
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
index bad8def5dd..4cefab54e6 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
@@ -14,8 +14,8 @@ Si vous n'utilisez pas le bon `.firm` correspondant à la 3DS cible, vous allez
#### Ce dont vous aurez besoin
* Deux dispositifs de famille de 3DS
- + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the device on stock firmware *on 11.5.0*
+ + **La 3DS source**: La 3DS faisant tourner un Custom Firmware (comme boot9strap ou arm9loaderhax) *dans sa version la plus récente*
+ + **La 3DS cible**: la 3DS en firmware normal *en 11.5.0*
* Posséder (et avoir installé) un des titres DSiware exploitables suivants (une copie piratée du jeu ne fonctionnera **pas**) sur **la 3DS source**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
index 6ccbc4a0a3..47233901fd 100644
--- a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installer boot9strap (ntrboot)"
##### Section II - ntrboot
1. Utilisez l’aimant pour repérer l’emplacement sur votre appareil où la sonde de sommeil est déclenchée
- + Cette étape n’est pas nécessaire sur les consoles de style non-pliante (tels que les 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Éteignez votre 3DS
1. Insérez votre linker dans votre console
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/fr_FR/ntr-and-cubic-ninja.txt b/_pages/fr_FR/ntr-and-cubic-ninja.txt
index dd3e690710..ac5ded63c3 100644
--- a/_pages/fr_FR/ntr-and-cubic-ninja.txt
+++ b/_pages/fr_FR/ntr-and-cubic-ninja.txt
@@ -4,7 +4,7 @@ title: "NTR et Cubic Ninja"
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-NTR Cubic Ninja will work for JPN New 3DS ONLY!
+Cubic Ninja NTR fonctionnera sur New 3DS JPN UNIQUEMENT !
{: .notice--warning}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/ntrboot.txt b/_pages/fr_FR/ntrboot.txt
index 45750a7535..1a52676bb9 100644
--- a/_pages/fr_FR/ntrboot.txt
+++ b/_pages/fr_FR/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Notez que le Linker ne sera pas capable d’être utilisé pour ses fonctions standards, tandis que l’exploit de ntrboot est installé dessus (sauf dans le cas de l’Acekard 2i, qui reste fonctionnel *sur 3DS systèmes avec custom firmware installé seulement*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/fr_FR/region-changing.txt b/_pages/fr_FR/region-changing.txt
index 9402c5e1da..98f994da34 100644
--- a/_pages/fr_FR/region-changing.txt
+++ b/_pages/fr_FR/region-changing.txt
@@ -4,7 +4,7 @@ title: "Changement de Région"
Il s’agit de la section Extensions afin de changer la région de votre CFW SysNAND. On peut le faire en installant l'image CTRTransfer 9.2.0 de la région à laquelle vous souhaitez passer.
-Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
+Il est quasiment inutile de changer la région de sa 3DS car Luma3DS permet de lancer des jeux d'autres régions et d'émuler des [changements de région individuellement](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) pour chaque titre.**.
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
@@ -16,14 +16,14 @@ Ce processus déliera votre NNID de votre console, car celui-ci ne sera plus com
A l'issue de ce processus, seules **les New 3DS qui n'ont jamais accédé à l'eshop auparavant** et **toutes les Old 3DS** seront capables d'accéder à l'eshop après avoir créé un nouvel NNID associé à la nouvelle région de la console. Les New 3DS qui ont déjà accédé à l'eshop depuis leur région d'origine ne pourront pas créer un nouvel NNID ni accéder à l'eshop depuis leur nouvelle région!
{: .notice--warning}
-Notez que parfois, pour une raison inconnue, l'eshop ne fonctionnera pas même sur une console sur laquelle il devrait. Ceci est entièrement dû aux serveurs de Nintendo, et je n'ai aucun contrôle dessus. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). La cause est actuellement inconnue.
+Notez que parfois, pour une raison inconnue, l'eshop ne fonctionnera pas même sur une console sur laquelle il devrait. Ceci est entièrement dû aux serveurs de Nintendo, et je n'ai aucun contrôle dessus. Similaire à l’avertissement ci-dessus, notez que parfois l’eShop marchera inexplicablement sur les consoles qui ne devrait pas (par exemple, certaines New 3DS). La cause est actuellement inconnue.
Le changement de région de votre 3DS en utilisant un CTRTransfer (ce que vous fait faire cette méthode) semble interférer avec les divers patchs de redémarrage. La cause de cela est inconnue, mais pour maintenant, les utilisateurs d'Old3DS ne pourront pas jouer à des jeux utilisant un mode de mémoire étendue (comme Monster Hunter, Super Smash Bros et Pokémon Soleil / Lune) jusqu'à ce qu’ils ne formatent leurs appareils.
-Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
+Ne formatez jamais une New 2DS en version inférieure à 11.4.0 ou il vous sera impossible d'effectuer la configuration initiale, ce qui résultera en un Brick de votre console !
{: .notice--danger}
-You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
+Vous devez avoir déjà installé Luma3DS et boot9strap ou arm9loaderhax pour utiliser ceci.
{: .notice--danger}
#### Ce dont vous aurez besoin
diff --git a/_pages/fr_FR/site-navigation.txt b/_pages/fr_FR/site-navigation.txt
index 71fc6187ea..46a61b486b 100644
--- a/_pages/fr_FR/site-navigation.txt
+++ b/_pages/fr_FR/site-navigation.txt
@@ -26,8 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Les Extensions de fichiers (Windows)](file-extensions-(windows))
+ [Finalisation de l'installation](finalizing-setup)
-+ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
-+ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
++ [Flasher ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flasher ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Bien démarrer (New 3DS)](get-started-(new-3ds))
+ [Bien démarrer (Old 3DS)](get-started-(old-3ds))
+ [Bien démarrer](get-started)
diff --git a/_pages/fr_FR/troubleshooting.txt b/_pages/fr_FR/troubleshooting.txt
index 9a98863dfe..6be51957eb 100644
--- a/_pages/fr_FR/troubleshooting.txt
+++ b/_pages/fr_FR/troubleshooting.txt
@@ -5,7 +5,7 @@ title: "Problèmes et Dépannage"
Si vous ne parvenez pas à démarrer votre 3DS, recherchez la section qui vous concerne et suivez les instructions correspondantes. Une fois qu'une solution fonctionne pour vous, vous pouvez passer à la suite du guide principal
(Cette section est plutôt longue, essayez de rechercher votre problème avec Ctrl+F)
-If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
+**Si vous n'arrivez toujours pas à résoudre votre problème et avez besoin d'aide, copiez le contenu de tous les fichiers .log pertinents présents à la racine de votre carte SD dans un [Gist](https://gist.github.com/), puis venez demander de l'aide avec une description détaillée de votre problème et de ce que vous avez essayé.**.
Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download)
diff --git a/_pages/he_IL/finalizing-setup.txt b/_pages/he_IL/finalizing-setup.txt
index 359108a592..35dc8c70df 100644
--- a/_pages/he_IL/finalizing-setup.txt
+++ b/_pages/he_IL/finalizing-setup.txt
@@ -35,7 +35,6 @@ title: "סיום התהליך"
1. תכניסו את ה-SD שלכם למחשב
1. תעתיקו את 'FBI.3dsx' לתיקיה '/ 3ds /' על כרטיס הזכרון
1. צרו תיקייה בשם `cias` בתיקיית האם של כרטיס ה- SD שלכם אם לא קיימת תיקייה כזו
-1. צרו תיקייה בשם `hblauncherloader` בתיקיית האם של כרטיס ה- SD שלכם אם לא קיימת תיקייה כזו
1. תעתיקו את `hblauncher_loader.cia`מתוך הזיפ של hblauncher_loader לתוך התיקייה `/cias/` שב-SD שלכם
1. תעתיקו את הקובץ `lumaupdater.cia` לתוך התיקייה `/cias/` שב-SD שלכם
1. תעתיקו את הקובץ `FBI.cia` לתוך התיקייה `/cias/` שב-SD שלכם
diff --git a/_pages/he_IL/flashing-ntrboot-(custom-firmware).txt b/_pages/he_IL/flashing-ntrboot-(custom-firmware).txt
index 7e8476ec99..36be954461 100644
--- a/_pages/he_IL/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/he_IL/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "צריבת ntrboot (פריצה)"
לפני שאתם ממשיכים, שימו לב שקראתם את כל המידע ב [ntrboot](ntrboot)
-שימו לב שכרטיס הפריצה לא יעבוד למטרות הרגילות שלו בזמן שפירצת ntrboot מותקנת עליו. יש שלבים אופטימלים בסוף הוראות צריבת ntrboot כדי למחוק אותו מכרטיס הפריצה אחרי שסיימתם.
-{: .notice--warning}
+שימו לב שהכרטיס פריצה לא יהיה ניתן לשימוש בזמן שntrboot מותקן עליו (פרט למקרה של הAcekard 2i שנשאר עובד *רק על 3DSים פרוצים*). יש שלבים אופטימלים בסוף הוראות צריבת ntrboot כדי למחוק אותו מכרטיס הפריצה אחרי שסיימתם.
שימו לב שבמקרים נדירים, יתכן שתהליך הצריבה **ישבור** כרטיס פריצה מזוייף ויגרום לו לא לעבוד. זה לא סביר שייקרה, אבל בכל זאת רק כרטיסי פריצה מקוריים שמפורטים נתמכים. כדי להוריד את הסיכויים של להשיג כרטיס פריצה מזוייף, מומלץ להשתמש באתר אמין כדי לקנות את הכרטיס (כמו [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/he_IL/get-started-(new-3ds).txt b/_pages/he_IL/get-started-(new-3ds).txt
index 725174e5c7..2fdc36149c 100644
--- a/_pages/he_IL/get-started-(new-3ds).txt
+++ b/_pages/he_IL/get-started-(new-3ds).txt
@@ -4,7 +4,7 @@ title: "צעדים ראשונים (New 3DS)"
תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0.
-Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. כרגע, גירסת הדפדפן לא רלוונטית בשביל New 3DS במדריך הזה.
+בהוסף, שימו לב שהמספר האחרון של גירסת הקונסולה (אשר לפניו מקף) מתייחס לגירסת הדפדפן שלכם. כרגע, גירסת הדפדפן לא רלוונטית בשביל New 3DS במדריך הזה.
עבור כל הגירסאות אתם יכולים לבצע [עדכון דרך משחק](cart-update) לגרסה גבוהה יותר באותה עמודה ולעקוב אחרי ההוראות ששם.
diff --git a/_pages/he_IL/get-started-(old-3ds).txt b/_pages/he_IL/get-started-(old-3ds).txt
index 8f1fcd1cc5..5a20af32f5 100644
--- a/_pages/he_IL/get-started-(old-3ds).txt
+++ b/_pages/he_IL/get-started-(old-3ds).txt
@@ -4,7 +4,7 @@ title: "צעדים ראשונים (Old 3DS)"
תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). אם הגירסה היא 0 אז אין לכם דפדפן, בעוד שכל מספר אחר אומר שיש דפדפן מותקן.
+בנוסף, שימו לב ששתי העמודות האחרונות של התרשים מתייחסות לספרה האחרונה במספר הגירסה שלכם (שתואמת לגירסת הדפדפן שמותקן על המערכת). אם הגירסה היא 0 אז אין לכם דפדפן, בעוד שכל מספר אחר אומר שיש דפדפן מותקן.
במקרה של "5.0.0-0U" למשל, אתם צריכים לעקוב אחרי העמודה "ללא דפדפן" והשורה מ 5.0.0 עד 5.1.0 כי הקונסולה היא על גרסה בטווח הזה ואין לה דפדפן מותקן.
diff --git a/_pages/he_IL/get-started.txt b/_pages/he_IL/get-started.txt
index 323b3a73c5..45d501d252 100644
--- a/_pages/he_IL/get-started.txt
+++ b/_pages/he_IL/get-started.txt
@@ -2,7 +2,7 @@
title: "צעדים ראשונים"
---
-Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. הדף הזה יעזור לכם למצוא איפה להתחיל בשביל המכשיר שלכם.
+דגמים וגירסאות שונות של הקונסולה ידרשו צעדים שונים כדי לפרוץ עם boot9strap. הדף הזה יעזור לכם למצוא איפה להתחיל בשביל המכשיר שלכם.
לחצו על התמונה של המכשיר שלכם כדי ללכת לעמוד המתאים. הצבעים של המכשיר בתמונה יכולים להיות שונים, אבל שימו לב למיקום הכפתורים והמאפיינים של כל מכשיר בקפידה כדי להבטיח שבחירתכם תהיה נכונה.
diff --git a/_pages/he_IL/installing-boot9strap-(dsiware).txt b/_pages/he_IL/installing-boot9strap-(dsiware).txt
index c28e0ce538..297ffe4a43 100644
--- a/_pages/he_IL/installing-boot9strap-(dsiware).txt
+++ b/_pages/he_IL/installing-boot9strap-(dsiware).txt
@@ -20,7 +20,7 @@ title: "התקנת boot9strap (DSiWare)"
שתי הקונסולות חייבות להיות באותו אזור.
{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! ניתן לעשות System Transfer פעם אחת בשבוע לכל NNID.
+בשתי השיטות האלו, הNNID של קונסולת המקור יהיה תקוע בקונסולת היעד אלא אם כן אתם תעשו System Transfer בחזרה או תתקשרו לנינטנדו (מידע ניתן למצוא בהוראות)! ניתן לעשות System Transfer פעם אחת בשבוע לכל NNID.
{: .notice--danger}
___
diff --git a/_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt
index 106bfafac3..60abb8bbf4 100644
--- a/_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/he_IL/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -8,7 +8,7 @@ title: "התקנת boot9strap (רשימת משחקי DSiWare הניתן להזר
ניתן לסרוק קודי QR על-ידי לחיצה על (L + R) בתפריט הבית, לאחר מכן לחיצה על סמל הQR על המסך התחתון.
-The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
+הדרישות גודל הבאות נובעות מזה שהDSiWare שמוזרק והשמירה שלו חייבים לא לשנות את גודלי הקבצים המתאימים שלהם כדי שיעברו בין ה3DSים כראוי, כלומר הDSiWare התורם חייב להיות גדול מספיק כדי להתאים ל DSiWare הפרוץ.
{% capture notice-list %}
diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt
index cf724e2d4b..193856a70d 100644
--- a/_pages/he_IL/installing-boot9strap-(ntrboot).txt
+++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "התקנת boot9strap (ntrboot)"
##### חלק II - ntrboot
1. תשתמשו במגנט כדי לגלות את הנקודה בקונסולה שלכם שחיישן השינה נמצא בו
- + השלב הזה לא נדרש על קונסולות לא מתקפלות (כגון ה old 2DS)
+ + שלב זה לא נדרש על הold 2DS (שיש לו מתג למצב השינה)
1. תכבו את המכשיר
1. תכניסו את כרטיס הפריצה שלכם לתוך הקונסולה שלכם
-1. תפעילו את הקונסולה, בזמן שהמגנט במקום שמפעיל את מצב שינה (או בזמן שהמתג של מצב השינה מופעל בקונסולות לא מתקפלות), בזמן שאתם מחזיקים (Start) + (Select) + (X)
+1. שימו מגנט על הקונסולה כדי להפעיל את החיישן שינה
+ + על old 2DS, אתם צריכים במקום להפעיל את המתג של מצב השינה
+1. תחזיקו (Power) + (Start) + (Select) + (X) לכמה שניות, ואז תשחררו את הכפתורים
+ זה אולי יקח כמה נסיונות בגלל שהמיקום לא נוח
1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller
diff --git a/_pages/he_IL/ntr-and-cubic-ninja.txt b/_pages/he_IL/ntr-and-cubic-ninja.txt
index 52aa3a7cd7..0fc4397422 100644
--- a/_pages/he_IL/ntr-and-cubic-ninja.txt
+++ b/_pages/he_IL/ntr-and-cubic-ninja.txt
@@ -4,7 +4,7 @@ title: "NTR ו- Cubic Ninja"
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-NTR Cubic Ninja will work for JPN New 3DS ONLY!
+NTR וCubic Ninja יעבדו רק בשביל New 3DS יפני!
{: .notice--warning}
#### מה צריך
diff --git a/_pages/he_IL/ntrboot.txt b/_pages/he_IL/ntrboot.txt
index 6c5efe8999..56355b2745 100644
--- a/_pages/he_IL/ntrboot.txt
+++ b/_pages/he_IL/ntrboot.txt
@@ -17,7 +17,7 @@ title: "ntrboot"
כדי לבדוק אם מגנט יעבוד, תחזיקו אותו על או באזור כפתורי ה(A)(B)(X)(Y) בזמן שהקונסולה עובדת כדי לראות האם הוא מפעיל את מצב שינה. אם הוא כן, שני המסכים יהיו שחורים כל עוד המגנט מוחזק במקום הזה.
{: .notice--info}
-שימו לב שכרטיס הפריצה לא יעבוד למטרות הרגילות שלו בזמן שפירצת ntrboot מותקנת עליו. יש שלבים אופטימלים בסוף הוראות צריבת ntrboot כדי למחוק אותו מכרטיס הפריצה אחרי שסיימתם.
+שימו לב שהכרטיס פריצה לא יהיה ניתן לשימוש בזמן שntrboot מותקן עליו (פרט למקרה של הAcekard 2i שנשאר עובד *רק על 3DSים פרוצים*). יש שלבים אופטימלים בסוף הוראות צריבת ntrboot כדי למחוק אותו מכרטיס הפריצה אחרי שסיימתם.
שימו לב שבמקרים נדירים, יתכן שתהליך הצריבה **ישבור** כרטיס פריצה מזוייף ויגרום לו לא לעבוד. זה לא סביר שייקרה, אבל בכל זאת רק כרטיסי פריצה מקוריים שמפורטים נתמכים. כדי להוריד את הסיכויים של להשיג כרטיס פריצה מזוייף, מומלץ להשתמש באתר אמין כדי לקנות את הכרטיס (כמו [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/he_IL/region-changing.txt b/_pages/he_IL/region-changing.txt
index 2ff221153d..a25712db80 100644
--- a/_pages/he_IL/region-changing.txt
+++ b/_pages/he_IL/region-changing.txt
@@ -4,7 +4,7 @@ title: "שינוי אזור"
זוהי הרחבה עבור שינוי אזור הSysNAND CFW שלכם. זה נעשה על ידי התקנת ה9.2.0 CTRTransfer image לאיזור שאתם רוצים לשנות אליו.
-Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
+שימו לב ששינוי אזור מיותר כמעט לחלוטין כי Luma3DS תומכת בReigon Free ו [אמולצית אזור לכל משחק בנפרד] (https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
@@ -16,14 +16,14 @@ Note that region changing is almost completely unnecessary since Luma3DS support
אחרי תהליך זה, רק ** New 3DS אשר מעולם לא נכנס אל הeShop לפני ** ו ** כל Old 3DS ** יוכלו לגשת לeShop אחרי יצירת NNID חדש על האזור החדש שלהם. New 3DS שכבר נכנס לEshop על האזור המקורי שלהם לא יכולים ליצור NNID חדש באזור החדש ולהיכנס שם לEshop!
{: .notice--warning}
-שימו לב שלעתים הeShop עדיין לא יעבוד לקונסולות ששם הוא צריך לעבוד. זה לגמרי קשור בשרתים של נינטנדו ואין לי שליטה על זה. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). הסיבה לכך היא כרגע לא ידועה.
+שימו לב שלעתים הeShop עדיין לא יעבוד לקונסולות ששם הוא צריך לעבוד. זה לגמרי קשור בשרתים של נינטנדו ואין לי שליטה על זה. בנוסף, שימו לב שמידי פעם הeShop יעבוד באופן בלתי מוסבר עבור מכשירים שהוא לא אמור (לדוגמת הNew 3DS). הסיבה לכך היא כרגע לא ידועה.
שינוי אזור עם CTRTransfer (שזו מה שהשיטה הזאת משתמשת) גורמת לתיקוני Reboot להישבר. הגורם לזה אינו ידוע, אך עבור בעלי Old 3DS לא תהיה אפשרות לפעיל משחקי HIMEM (כגון Monster Hunter, Super Smash Bros Pokémon Sun / Moon) עד שהם מפרמטים את המכשירים שלהם.
-Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
+לעולם אל תבצעו פרמוט על New 2DS XL בגרסה נמוכה מ-11.4.0 כי לא תוכלו לסיים את ההגדרה הראשונית!
{: .notice--danger}
-You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
+אתם חייבים שLuma3DS וboot9strap או arm9loaderhax יהיו מותקנים כדי להשתמש בזה.
{: .notice--danger}
#### מה אתם צריכים
diff --git a/_pages/he_IL/site-navigation.txt b/_pages/he_IL/site-navigation.txt
index ad212d4313..c978269035 100644
--- a/_pages/he_IL/site-navigation.txt
+++ b/_pages/he_IL/site-navigation.txt
@@ -26,8 +26,8 @@ sitemap: false
+ [שאלות ותשובות](faq)
+ [סיומות קבצים (Windows)](file-extensions-(windows))
+ [סיום התהליך](finalizing-setup)
-+ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
-+ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
++ [צריבת ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [צריבת ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [צעדים ראשונים (New 3DS)](get-started-(new-3ds))
+ [צעדים ראשונים (Old 3DS)](get-started-(old-3ds))
+ [צעדים ראשונים](get-started)
diff --git a/_pages/he_IL/troubleshooting.txt b/_pages/he_IL/troubleshooting.txt
index aacf2a1cf9..b897babb6e 100644
--- a/_pages/he_IL/troubleshooting.txt
+++ b/_pages/he_IL/troubleshooting.txt
@@ -5,7 +5,7 @@ title: "פתרון בעיות"
אם אתם לא מצליחים להפעיל את המכשיר שלכם, תחפשו את החלק הרלוונטי לכם ותעקבו אחרי ההוראות. אחרי שפתרון עבד לכם, תמשיכו עם המדריך הראשי
(הדף הזה ארוך למדי, השתמשו ב Ctrl + F כדי לחפש את הבעיה)
-If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
+אם אתם עדיין לא יכולים לפתור את הבעיה ואתם צריכים עזרה, בבקשה תדביקו את התוכן של כל קבצי ה- .log הרלוונטיים מה- SD אל תוך [Gist](https://gist.github.com/), ואז תבואו לעזרה מוכנים עם מידע רחב על הבעיה ומה ניסיתם.
**כדי להשתמש בקישורי מגנט, תצטרכו כלי טורנט כמו [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
diff --git a/_pages/hu_HU/finalizing-setup.txt b/_pages/hu_HU/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/hu_HU/finalizing-setup.txt
+++ b/_pages/hu_HU/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/hu_HU/flashing-ntrboot-(custom-firmware).txt b/_pages/hu_HU/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/hu_HU/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/hu_HU/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
+++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/hu_HU/ntrboot.txt b/_pages/hu_HU/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/hu_HU/ntrboot.txt
+++ b/_pages/hu_HU/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/id_ID/flashing-ntrboot-(custom-firmware).txt b/_pages/id_ID/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/id_ID/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/id_ID/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/id_ID/installing-boot9strap-(ntrboot).txt
+++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/id_ID/ntrboot.txt b/_pages/id_ID/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/id_ID/ntrboot.txt
+++ b/_pages/id_ID/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt
index 5502423ab9..3dd33eccfb 100644
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@@ -35,7 +35,6 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
1. Inserisci la scheda SD nel tuo computer
1. Copia il file `FBI.3dsx` nella cartella `/3ds/` nella tua scheda SD
1. Se assente, crea una cartella chiamata `cias` nella directory principale della tua scheda SD
-1. Se assente, crea una cartella chiamata `hblauncherloader` nella directory principale della tua scheda SD
1. Copia il file `hblauncher_loader.cia` dall'archivio `.zip` di hblauncher_loader nella cartella `/cias/` della tua scheda SD
1. Copia il file `lumaupdater.cia` nella cartella `/cias/` della tua scheda SD
1. Copia il file `FBI.cia` nella cartella `/cias/` della tua scheda SD
diff --git a/_pages/it_IT/flashing-ntrboot-(custom-firmware).txt b/_pages/it_IT/flashing-ntrboot-(custom-firmware).txt
index 70d4a7d9cb..047e1a5b19 100644
--- a/_pages/it_IT/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/it_IT/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flash di ntrboot (Custom Firmware)"
Prima di procedere, assicurati di aver letto tutte le informazioni presenti alla pagina [ntrboot](ntrboot)
-Tieni presente che non potrai usare la flashcart normalmente finché vi sarà installato l'exploit ntrboot. Per rimuoverlo dalla flashcart al termine dell'installazione, sono presenti al termine della guida delle istruzioni opzionali.
-{: .notice--warning}
+Nota che la flashcart non potrà più essere utilizzata per le sue funzioni normali finchè l'exploit ntrboot è installato su di essa (fatta eccezione per la Acekard 2i che funzionerà comunque solo su *console 3DS con un custom firmware installato*). Per rimuoverlo dalla flashcart al termine dell'installazione, sono presenti al termine della guida delle istruzioni opzionali.
Tieni presente che in rare circostanze è possibile **brickare** una flashcart contraffatta durante il flashing, e renderla permanentemente inutilizzabile. È improbabile, tuttavia sono supportate soltanto le flashcart originali qui indicate. Per ridurre i rischi di ottenere una flashcart contraffatta, si raccomanda di comprarne una solo da siti affidabili (come [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/it_IT/get-started-(new-3ds).txt b/_pages/it_IT/get-started-(new-3ds).txt
index 84bb475b02..7d74a611ea 100644
--- a/_pages/it_IT/get-started-(new-3ds).txt
+++ b/_pages/it_IT/get-started-(new-3ds).txt
@@ -4,7 +4,7 @@ title: "Cominciamo! (New 3DS)"
Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0.
-Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Al momento, tale versione è irrilevante allo scopo della guida.
+Inoltre, ricorda che l'ultimo numero della tua versione di sistema (quello preceduto da un trattino) si riferisce alla tua versione del browser internet. Al momento, tale versione è irrilevante allo scopo della guida.
Puoi effettuare in qualunque caso un [aggiornamento con scheda di gioco](cart-update) ad una versione successiva della stessa colonna per poter seguirne le istruzioni.
diff --git a/_pages/it_IT/get-started-(old-3ds).txt b/_pages/it_IT/get-started-(old-3ds).txt
index 24e5f25a7c..a19c380459 100644
--- a/_pages/it_IT/get-started-(old-3ds).txt
+++ b/_pages/it_IT/get-started-(old-3ds).txt
@@ -4,7 +4,7 @@ title: "Cominciamo! (Old 3DS)"
Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Se la versione termina con -0 allora non hai un browser, mentre qualsiasi altro numero superiore a -0 indica che è installato un browser.
+Inoltre, ricorda che le ultime due colonne della tabella si riferiscono all'ultimo numero della tua versione (che corrisponde alla versione del browser installata nel sistema). Se la versione termina con -0 allora non hai un browser, mentre qualsiasi altro numero superiore a -0 indica che è installato un browser.
Ad esempio, se dovessi avere la versione del software "5.0.0-0U", seguirai la colonna "Senza Browser" e la riga "da 5.0.0 a 5.1.0." perché la versione del software di sistema è inclusa in tale intervallo e non è presente un browser installato.
diff --git a/_pages/it_IT/get-started.txt b/_pages/it_IT/get-started.txt
index aaeefa8d27..9988bac7fe 100644
--- a/_pages/it_IT/get-started.txt
+++ b/_pages/it_IT/get-started.txt
@@ -2,7 +2,7 @@
title: "Cominciamo!"
---
-Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. In questa pagina potrai trovare il corretto punto di partenza per la tua console.
+Console di modello, versioni del software e regioni diverse richiederanno procedure differenti per installare correttamente il Custom Firmware tramite boot9strap. In questa pagina potrai trovare il corretto punto di partenza per la tua console.
Clicca sull'immagine della tua console per proseguire alla sezione corretta della guida. Il colore delle console nelle immagini potrebbe variare, ma verifica attentamente la disposizione dei pulsanti e la forma della console per assicurarti di selezionare quella corretta.
diff --git a/_pages/it_IT/installing-boot9strap-(dsiware).txt b/_pages/it_IT/installing-boot9strap-(dsiware).txt
index f85520688c..341537bbd2 100644
--- a/_pages/it_IT/installing-boot9strap-(dsiware).txt
+++ b/_pages/it_IT/installing-boot9strap-(dsiware).txt
@@ -20,7 +20,7 @@ Entrambi i metodi richiedono di effettuare un [Trasferimento dati](https://www.n
Entrambe le console DEVONO essere della stessa regione.
{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Il Trasferimento dei dati può essere eseguito solo una volta a settimana per NNID.
+Con entrambi i metodi il NNID del 3DS di partenza rimarrà bloccato nel 3DS di destinazione a meno che non venga effettuato un altro Trasferimento dei dati tra i due 3DS o chiami Nintendo (puoi trovare tutti i dettagli nelle istruzioni)! Il Trasferimento dei dati può essere eseguito solo una volta a settimana per NNID.
{: .notice--danger}
___
diff --git a/_pages/it_IT/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/it_IT/installing-boot9strap-(dsiware-game-injection-list).txt
index daad7fad15..4f5eac72f3 100644
--- a/_pages/it_IT/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/it_IT/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -8,7 +8,7 @@ L'elenco è suddiviso in base alla regione nel seguente ordine: USA, EUR, JPN. O
I codici QR possono essere scansionati tramite la pressione dei tasti (L) + (R) nel menu HOME, quindi toccando l'icona QR sullo schermo inferiore.
-The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
+Vi sono dei requisiti sulle dimensioni in quanto sia il DSiWare iniettato che il suo salvataggio modificato non devono avere dimensioni diverse da quelle originali per poter essere trasferiti tramite Trasferimento dati. Questo vuol dire che il DSiWare di partenza deve essere grande abbastanza per contenere il DSiWare modificato.
{% capture notice-list %}
diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt
index 62ad8f9fc0..b53dcd0c87 100644
--- a/_pages/it_IT/installing-boot9strap-(ntrboot).txt
+++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installazione di boot9strap (ntrboot)"
##### Sezione II - ntrboot
1. Trova con il magnete il punto che pone la console in modalità riposo
- + Questo passo non è necessario in caso utilizzi una console non a chiusura (come un Old 2DS)
+ + Questo passaggio non è necessario su un Old 2DS (che ha una levetta per la modalità riposo)
1. Spegni il tuo 3DS
1. Inserisci la flashcart nella tua console
-1. Avvia la console, posando il magnete nel punto precedentemente localizzato (o utilizzando il pulsante di sospensione su console non a chiusura), e tenendo premuti i pulsanti (Start) + (Select) + (X)
+1. Posiziona il magnete sulla console per attivare il sensore della modalità riposo
+ + Su Old 2DS, devi invece attivare la levetta della modalità riposo
+1. Tieni premuto i pulsanti (Accensione) + (Start) + (Select) + (X) per alcuni secondi, quindi lascia i pulsanti
+ Data la complessita dell'operazione, potrebbero volerci più tentativi
1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller
diff --git a/_pages/it_IT/ntr-and-cubic-ninja.txt b/_pages/it_IT/ntr-and-cubic-ninja.txt
index 91e2b9c77c..111ded5991 100644
--- a/_pages/it_IT/ntr-and-cubic-ninja.txt
+++ b/_pages/it_IT/ntr-and-cubic-ninja.txt
@@ -4,7 +4,7 @@ title: "NTR e Cubic Ninja"
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
-NTR Cubic Ninja will work for JPN New 3DS ONLY!
+Questo metodo funziona SOLO su New 3DS JPN!
{: .notice--warning}
#### Cosa serve
diff --git a/_pages/it_IT/ntrboot.txt b/_pages/it_IT/ntrboot.txt
index 091075f9c7..031c06d85c 100644
--- a/_pages/it_IT/ntrboot.txt
+++ b/_pages/it_IT/ntrboot.txt
@@ -17,7 +17,7 @@ Entrambi richiedono l'utilizzo di un piccolo magnete se la console di riferiment
Per testare il funzionamento del magnete, appoggialo vicino ai pulsanti (A)(B)(X)(Y) mentre la console è accesa per verificare l'attivazione della modalità riposo. In tal caso, entrambi gli schermi si spegneranno finché il magnete rimane in questa posizione.
{: .notice--info}
-Tieni presente che non potrai usare la flashcart normalmente finché vi sarà installato l'exploit ntrboot. Per rimuoverlo dalla flashcart al termine dell'installazione, sono presenti al termine della guida delle istruzioni opzionali.
+Nota che la flashcart non potrà più essere utilizzata per le sue funzioni normali finchè l'exploit ntrboot è installato su di essa (fatta eccezione per la Acekard 2i che funzionerà comunque solo su *console 3DS con un custom firmware installato*). Per rimuoverlo dalla flashcart al termine dell'installazione, sono presenti al termine della guida delle istruzioni opzionali.
Tieni presente che in rare circostanze è possibile **brickare** una flashcart contraffatta durante il flashing, e renderla permanentemente inutilizzabile. È improbabile, tuttavia sono supportate soltanto le flashcart originali qui indicate. Per ridurre i rischi di ottenere una flashcart contraffatta, si raccomanda di comprarne una solo da siti affidabili (come [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/it_IT/region-changing.txt b/_pages/it_IT/region-changing.txt
index c4adbd9065..977134663b 100644
--- a/_pages/it_IT/region-changing.txt
+++ b/_pages/it_IT/region-changing.txt
@@ -4,7 +4,7 @@ title: "Cambiare regione"
In questa sezione aggiuntiva verrà spiegato come cambiare regionalità su SysNAND con CFW. Per questo scopo, verrà eseguito un CTRTransfer alla versione 9.2.0 della regione alla quale si desidera passare.
-Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
+Tuttavia, il cambio della regione è quasi completamente inutile in quanto Luma3DS supporta l'avvio di giochi di altre regioni e l'[emulazione regionale](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) su titoli individuali.
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
@@ -16,14 +16,14 @@ Questo processo scollegherà il NNID dalla console, in quanto non potrà essere
Dopo questo procedimento, solo i **New 3DS che non hanno mai acceduto all'eShop** e **qualsiasi Old 3DS** potranno accedere all'eShop dopo aver creato un nuovo NNID legato alla nuova regione. I New 3DS con regione modificata che hanno già avuto accesso all'eShop con la regione originale non potranno creare un nuovo NNID per accedere all'eShop con la nuova regione!
{: .notice--warning}
-Tieni presente che occasionalmente l'eShop potrebbe non funzionare senza alcun motivo apparente. Questo dipende totalmente dai server Nintendo, e non si può fare assolutamente nulla al riguardo. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Le cause sono correntemente sconosciute.
+Tieni presente che occasionalmente l'eShop potrebbe non funzionare senza alcun motivo apparente. Questo dipende totalmente dai server Nintendo, e non si può fare assolutamente nulla al riguardo. In maniera molto simile, l'eShop potrebbe invece funzionare su console per cui non dovrebbe (come su alcuni New 3DS). Le cause sono correntemente sconosciute.
Il cambio regione tramite CTRTransfer (effettuato in questa guida) sembra far smettere di funzionare le patch relative al riavvio della console. La causa è sconosciuta, ma al momento gli utenti in possesso di un Old 3DS non potranno avviare giochi che utilizzano la modalità a memoria estesa (come Monster Hunter, Super Smash Bros e Pokémon Sole / Luna) finché non formattano la console.
-Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
+Non formattare mai un New 2DS XL se sei ad una versione del software <11.4.0 altrimenti non potrai più completare l'installazione iniziale!
{: .notice--danger}
-You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
+DEVI aver già installato Luma3DS e uno tra boot9strap e arm9loaderhax per poter proseguire.
{: .notice--danger}
#### Cosa serve
diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt
index 68ffb1da1d..196cb4f175 100644
--- a/_pages/it_IT/site-navigation.txt
+++ b/_pages/it_IT/site-navigation.txt
@@ -26,8 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Estensioni dei file (Windows)](file-extensions-(windows))
+ [Completamento dell'installazione](finalizing-setup)
-+ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
-+ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
++ [Flash di ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
++ [Flash di ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Cominciamo! (New 3DS)](get-started-(new-3ds))
+ [Cominciamo! (Old 3DS)](get-started-(old-3ds))
+ [Cominciamo!](get-started)
diff --git a/_pages/it_IT/troubleshooting.txt b/_pages/it_IT/troubleshooting.txt
index 97db55f50f..f603b90074 100644
--- a/_pages/it_IT/troubleshooting.txt
+++ b/_pages/it_IT/troubleshooting.txt
@@ -5,7 +5,7 @@ title: "Risoluzione dei problemi"
Se non riesci ad avviare la tua console, consulta la sezione relativa al tuo problema e segui le istruzioni. Una volta risolto il problema, puoi proseguire con la guida principale
(Questa sezione è piuttosto lunga; puoi cercare il tuo problema più velocemente con Ctrl+F)
-If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
+Se comunque non riesci a risolvere il tuo problema e hai bisogno di aiuto, incolla il contenuto dei file .log rilevanti dalla directory principale della tua scheda SD in un [Gist](https://gist.github.com/), successivamente fornisci una descrizione dettagliata del tuo problema e delle eventuali operazioni che hai fatto per provare a risolverlo.
**Per usare i link [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download)**
diff --git a/_pages/ja_JP/finalizing-setup.txt b/_pages/ja_JP/finalizing-setup.txt
index bdd2d2ff84..db2f75b8bb 100644
--- a/_pages/ja_JP/finalizing-setup.txt
+++ b/_pages/ja_JP/finalizing-setup.txt
@@ -35,7 +35,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
1. パソコンにSDカードを入れます
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. SDカードのルートに`cias`フォルダはない場合、そのフォルダを作成します
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. hblauncher_loader `.zip`から`hblauncher_loader.cia`をSDカードの`/cias/`フォルダにコピーします
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/ja_JP/flashing-ntrboot-(custom-firmware).txt b/_pages/ja_JP/flashing-ntrboot-(custom-firmware).txt
index 91b32025ce..a1e63564bf 100644
--- a/_pages/ja_JP/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/ja_JP/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
index a89560416e..a9a3d6a362 100644
--- a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/ja_JP/ntrboot.txt b/_pages/ja_JP/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/ja_JP/ntrboot.txt
+++ b/_pages/ja_JP/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ko_KR/finalizing-setup.txt b/_pages/ko_KR/finalizing-setup.txt
index 4c6d956b91..1e41fea2d6 100644
--- a/_pages/ko_KR/finalizing-setup.txt
+++ b/_pages/ko_KR/finalizing-setup.txt
@@ -35,7 +35,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
1. SD 카드를 컴퓨터에 삽입해 주세요.
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. SD 카드의 최상위 경로에 `cias` 폴더가 없을 경우 폴더를 만들어 주세요.
-1. SD 카드에 `hblauncherloader` 폴더가 없을 경우 폴더를 만어 주세요.
1. hblauncher_loader `.zip`에서 `hblauncher_loader.cia`를 SD 카드의 `/cias/` 폴더에 복사해 주세요.
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/ko_KR/flashing-ntrboot-(custom-firmware).txt b/_pages/ko_KR/flashing-ntrboot-(custom-firmware).txt
index 2a0e69743c..56299a4185 100644
--- a/_pages/ko_KR/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/ko_KR/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
index 2181a8a030..e7d8658215 100644
--- a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. 기기를 종료해 주세요.
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/ko_KR/ntrboot.txt b/_pages/ko_KR/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/ko_KR/ntrboot.txt
+++ b/_pages/ko_KR/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ms_MY/finalizing-setup.txt b/_pages/ms_MY/finalizing-setup.txt
index 62f66602b6..29c1b41b84 100644
--- a/_pages/ms_MY/finalizing-setup.txt
+++ b/_pages/ms_MY/finalizing-setup.txt
@@ -35,7 +35,6 @@ Semasa proses ini, kami juga akan memasang program-program berikut:
1. Pasang kad SD anda ke dalam komputer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Cipta satu folder bernama `cias` pada root kad SD anda jika ianya tidak pernah wujud
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Salin `hblauncher_loader.cia` dari hblauncher_loader `.zip` ke dalam folder `/cias/` pada SD kad anda
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/ms_MY/flashing-ntrboot-(custom-firmware).txt b/_pages/ms_MY/flashing-ntrboot-(custom-firmware).txt
index 3acfd8bfda..62b071bee7 100644
--- a/_pages/ms_MY/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/ms_MY/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt
index 233387d41e..ee973c61aa 100644
--- a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/ms_MY/ntrboot.txt b/_pages/ms_MY/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/ms_MY/ntrboot.txt
+++ b/_pages/ms_MY/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/nl_NL/finalizing-setup.txt b/_pages/nl_NL/finalizing-setup.txt
index f268a984e3..360688a181 100644
--- a/_pages/nl_NL/finalizing-setup.txt
+++ b/_pages/nl_NL/finalizing-setup.txt
@@ -35,7 +35,6 @@ Tijdens dit proces zullen we ook de volgende programma's installeren:
1. Plaats je SD kaart in je computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Maak een map genaamd `cias` op de root van jouw SD kaart, indien deze nog niet aanwezig is
-1. Maak een nieuwe map genaamd `hblauncherloader` in de hooofdmap van je SD kaart, indien deze nog niet aanwezig is
1. Kopieer `hblauncher_loader.cia` van de hblauncher_loader `.zip` naar de `/cias/` map op je SD kaart
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/nl_NL/flashing-ntrboot-(custom-firmware).txt b/_pages/nl_NL/flashing-ntrboot-(custom-firmware).txt
index c416e1e9a7..ff8230c98e 100644
--- a/_pages/nl_NL/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/nl_NL/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt
index 6616185670..5cee1ddbc7 100644
--- a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt
+++ b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Schakel je 3ds uit
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/nl_NL/ntrboot.txt b/_pages/nl_NL/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/nl_NL/ntrboot.txt
+++ b/_pages/nl_NL/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/no_NO/finalizing-setup.txt b/_pages/no_NO/finalizing-setup.txt
index 24fbb82ffc..d824d1b8e8 100644
--- a/_pages/no_NO/finalizing-setup.txt
+++ b/_pages/no_NO/finalizing-setup.txt
@@ -35,7 +35,6 @@ Under denne prossesen, vil vi også sette opp program som følgende:
1. Sett inn SD-kortet i datamaskinen din
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Opprett en mappe kalt `cias` på roten av SD-kortet hvis den ikke allerede er der
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Kopier `hblauncher_loader.cia` fra hblauncher_loader `.zip` til `/cias/` mappen på SD-kortet
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/no_NO/flashing-ntrboot-(custom-firmware).txt b/_pages/no_NO/flashing-ntrboot-(custom-firmware).txt
index b990e6ba13..92003f523d 100644
--- a/_pages/no_NO/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/no_NO/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/no_NO/installing-boot9strap-(ntrboot).txt b/_pages/no_NO/installing-boot9strap-(ntrboot).txt
index 3dd5b985b9..08790d5695 100644
--- a/_pages/no_NO/installing-boot9strap-(ntrboot).txt
+++ b/_pages/no_NO/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Slå av enheten
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/no_NO/ntrboot.txt b/_pages/no_NO/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/no_NO/ntrboot.txt
+++ b/_pages/no_NO/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/pl_PL/finalizing-setup.txt b/_pages/pl_PL/finalizing-setup.txt
index f930f8758c..d2848905e5 100644
--- a/_pages/pl_PL/finalizing-setup.txt
+++ b/_pages/pl_PL/finalizing-setup.txt
@@ -35,7 +35,6 @@ Podczas tego procesu zainstalujemy również takie programy jak:
1. Włóż kartę SD do komputera
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Stwórz folder o nazwie "cias" w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Skopiuj plik `hblauncher_loader.cia` z archiwum hblauncher_loader `.zip` do folderu `/cias/` na twojej karcie SD
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/pl_PL/flashing-ntrboot-(custom-firmware).txt b/_pages/pl_PL/flashing-ntrboot-(custom-firmware).txt
index cba36237c3..df3672be86 100644
--- a/_pages/pl_PL/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/pl_PL/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt
index c989febfa4..6e4395053f 100644
--- a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt
+++ b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/pl_PL/ntrboot.txt b/_pages/pl_PL/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/pl_PL/ntrboot.txt
+++ b/_pages/pl_PL/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt
index 8eda6da31d..8dede2a7ec 100644
--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@@ -12,14 +12,14 @@ Neste caso, usamos o Luma3DS por [AuroraWright](https://github.com/AuroraWright/
Durante este processo, também configuramos alguns programas como os seguintes:
+ **FBI** *(Instala jogos e aplicativos no formato CIA)*
-+ **Themely** *(installs custom themes)*
++ **Themely** *(Instala temas personalizados)*
+ **Luma3DS Updater** *(Atualiza sua instalação CFW facilmente)*
+ **GodMode9** *(Ferramenta multiuso com funções de NAND e cartucho)*
+ **Homebrew Launcher Loader** *(inicia o Homebrew Launcher como um aplicativo normal, graças à mágica do Rosalina)*
#### O que você precisa
-* The latest release of [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(the `.cia` file)*
+* A versão mais recente do [Themely](https://github.com/ihaveamac/Themely/releases/latest) *(o arquivo `.cia`)*
* A versão mais recente do [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest)
* A versão mais recente do [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* A versão mais recente do [DSP1](https://github.com/zoogie/DSP1/releases/latest)
@@ -35,12 +35,11 @@ Durante este processo, também configuramos alguns programas como os seguintes:
1. Insira o cartão SD no seu computador
1. Copie `FBI.3dsx` para a pasta `/3ds/` no seu cartão SD
1. Crie uma pasta chamada `cias` na raiz do seu cartão SD se ela ainda não existir
-1. Crie uma pasta chamada `hblauncherloader` na raiz do seu cartão SD se ela ainda não existir
1. Copie `hblauncher_loader.cia` do `.zip` do hblauncher_loader para a pasta `/cias/` do seu cartão SD
1. Copie `lumaupdater.cia` para a pasta `/cias/` no seu cartão SD
1. Copie `FBI.cia` para a pasta `/cias/` no seu cartão SD
1. Copie `DSP1.cia` para a pasta `/cias/` no seu cartão SD
-1. Copy `Themely.cia` to the `/cias/` folder on your SD card
+1. Copie o `Themely.cia` para a pasta `/cias/` no seu cartão SD
{: .notice--info}
diff --git a/_pages/pt_BR/flashing-ntrboot-(custom-firmware).txt b/_pages/pt_BR/flashing-ntrboot-(custom-firmware).txt
index 02e9d29faa..d1a4b6466b 100644
--- a/_pages/pt_BR/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(custom-firmware).txt
@@ -1,24 +1,23 @@
---
-title: "Flashing ntrboot (Custom Firmware)"
+title: "Instalando ntrboot (Custom Firmware)"
---
-Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+Antes de prosseguir, certifique-se de que você tenha lido todas as informações em [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Fique ciente de que o flashcart não será capaz de ser utilizado para a sua funcionalidade padrão enquanto o exploit ntrboot estiver instalado nele (exceto no caso do Acekard 2i, que permanece funcional *apenas em sistemas 3DS com firmware customizado*). Existem etapas opcionais no final das instruções da instalação do ntrboot para removê-lo do seu flashcart após terminar o guia.
-Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+Note que em algumas raras circunstâncias, pode ser possível que o processo de instalação cause um **brick** em um flashcart falso e torne-o permanentemente inutilizável. É pouco provável que isso ocorra, mas mesmo assim somente os flashcarts originais listados são suportados. Para reduzir a chance de receber um flashcart falso, é recomendado que você use um site com uma boa reputação para comprar o seu flashcart, (como o [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
#### O que você precisa
-* Your ntrboot compatible DS / DSi flashcart:
- + Either the Acekard 2i or R4i Gold 3DS RTS
-* Two 3DS family devices
- + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
- + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
-* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+* Seu flashcart do DS / DSi compatível com o ntrboot:
+ + Tanto o Acekard 2i quanto o R4i Gold 3DS RTS
+* Dois dispositivos da família 3DS
+ + **O 3DS de origem**: o dispositivo da família 3DS que já está rodando algum tipo de Custom Firmware (como o boot9strap ou o arm9loaderhax)
+ + **O 3DS de destino**: o dispositivo com o firmware sem modificação/não modificado
+* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; não o arquivo `devkit`)*
+* A versão mais recente do [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
#### Instruções
@@ -26,27 +25,27 @@ Note that in some rare circumstances, it may be possible for the flashing proces
1. Desligue o ** 3DS de origem**
1. Insira o cartão SD do **3ds de origem** no seu computador
-1. Create a folder named `ntrboot` on the root of your SD card
-1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
-1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
-1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
-1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+1. Crie uma pasta chamada `ntrboot` na raiz do seu cartão SD
+1. Copie o `boot9strap_ntr.firm` e o `boot9strap_ntr.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD
+1. Copie o `ntrboot_flasher.firm` do `.zip` do ntrboot_flasher para a pasta `/luma/payloads` no cartão SD do **3DS de origem**
+1. Reinsira o cartão SD do **3DS de origem** no **3DS de origem**
+1. Insira o seu flashcart do DS / DSi compatível com o ntrboot no seu **3DS de origem**
-##### Section II - Flashing ntrboot
+##### Seção II - Instalando o ntrboot
-1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
-1. Select "ntrboot_flasher"
-1. Select "Dump Flash"
+1. Execute o chainloader do Luma3DS segurando (Start) durante a inicialização do **3DS de origem**
+1. Selecione "ntrboot_flasher"
+1. Selecione "Dump Flash"
1. Aguarde até que o processo seja concluído
1. Aperte (B) para retornar para o menu principal
-1. Select "Inject Ntrboot"
-1. Press (Y) to proceed
-1. Press (R) for retail unit ntrboot
+1. Selecione "Inject Ntrboot"
+1. Aperte (Y) para continuar
+1. Aperte (R) para selecionar "retail unit ntrboot"
1. Aguarde até que o processo seja concluído
1. Aperte (B) para retornar para o menu principal
-1. Select "EXIT" to power off **the source 3DS**
+1. Selecione "EXIT" para desligar o **3DS de origem**
___
-Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+Continuar para [Instalando boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/pt_BR/flashing-ntrboot-(powersaves).txt b/_pages/pt_BR/flashing-ntrboot-(powersaves).txt
index e2a38cf696..a28748a6a2 100644
--- a/_pages/pt_BR/flashing-ntrboot-(powersaves).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(powersaves).txt
@@ -1,5 +1,5 @@
----
-title: "Flashing ntrboot (Powersaves)"
----
-
-This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
+---
+title: "Instalando ntrboot (Powersaves)"
+---
+
+Este método ainda não está completo, e como tal, é apenas uma página reservada.
\ No newline at end of file
diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt
index 755b6e7231..9480bc6f6d 100644
--- a/_pages/pt_BR/home.txt
+++ b/_pages/pt_BR/home.txt
@@ -37,7 +37,7 @@ Na maioria dos casos, executar homebrew no seu dispositivo é 100% gratuito, usa
**Custom Firmware** ("CFW") permite você usar hacks mais avançados que o homebrew do modo userland não consegue tão facilmente. Por exemplo, os patches de assinaturas permitem você instalar títulos não assinados que aparecem logo no seu Menu HOME.
-CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
+O CFW pode ser instalado em qualquer console e em qualquer versão (porém pode exigir equipamentos / acessórios adicionais para as versões 11.3.0 e superior).
## O que este guia instala?
diff --git a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
index 94bc936dbd..7b42a0bd8b 100644
--- a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
@@ -1,40 +1,42 @@
---
-title: "Installing boot9strap (ntrboot)"
+title: "Instalando boot9strap (ntrboot)"
---
-#### O que você precisa
+#### What you need
-* A magnet that triggers the sleep mode of your device (if using a folding style device)
-* Your ntrboot flashed flashcart
-*A versão mais recente do [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap padrão; não o arquivo `devkit`, nem o arquivo `ntr`)*
-* A versão mais recente do [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(o arquivo `.7z`)*
-* O [Kit de Iniciante de Homebrew](http://smealum.github.io/ninjhax2/starter.zip)
+* Um ímã que aciona o modo de descanso do dispositivo (caso esteja usando um dispositivo dobrável)
+* Seu flashcart com o ntrboot instalado
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
-#### Instruções
+#### Instructions
-##### Seção I - Trabalho Preparatório
+##### Section I - Prep Work
-1. Desligue seu dispositivo
-1. Insira o cartão SD no seu computador
+1. Power off your device
+1. Insert your SD card into your computer
1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
-1. Copie _o conteúdo do_ `starter.zip` para a raiz do seu cartão SD
-1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD
-1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD
+1. Copy _the contents of_ `starter.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
{: .notice--info}
-1. Reinsira seu cartão SD no seu dispositivo
-1. Ligue o seu dispositivo
+1. Reinsert your SD card into your device
+1. Power on your device
-##### Section II - ntrboot
+##### Seção II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Desligue seu dispositivo
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller
@@ -74,10 +76,10 @@ This is an optional section that will allow you to restore your flashcart to its
Do not follow this section until you have completed the rest of the instructions on this page.
{: .notice--warning}
-1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
-1. Select "ntrboot_flasher"
+1. Execute o chainloader do Luma3DS segurando (Start) durante a inicialização do **3DS de origem**
+1. Selecione "ntrboot_flasher"
1. Select "Restore Flash"
-1. Press (Y) to proceed
+1. Aperte (Y) para continuar
1. Aguarde até que o processo seja concluído
1. Aperte (B) para retornar para o menu principal
-1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
+1. Selecione "EXIT" para desligar o **3DS de origem**
\ No newline at end of file
diff --git a/_pages/pt_BR/ntrboot.txt b/_pages/pt_BR/ntrboot.txt
index 45750a7535..69659405c5 100644
--- a/_pages/pt_BR/ntrboot.txt
+++ b/_pages/pt_BR/ntrboot.txt
@@ -17,9 +17,9 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Fique ciente de que o flashcart não será capaz de ser utilizado para a sua funcionalidade padrão enquanto o exploit ntrboot estiver instalado nele (exceto no caso do Acekard 2i, que permanece funcional *apenas em sistemas 3DS com firmware customizado*). Existem etapas opcionais no final das instruções da instalação do ntrboot para removê-lo do seu flashcart após terminar o guia.
-Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+Note que em algumas raras circunstâncias, pode ser possível que o processo de instalação cause um **brick** em um flashcart falso e torne-o permanentemente inutilizável. É pouco provável que isso ocorra, mas mesmo assim somente os flashcarts originais listados são suportados. Para reduzir a chance de receber um flashcart falso, é recomendado que você use um site com uma boa reputação para comprar o seu flashcart, (como o [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
___
@@ -38,7 +38,7 @@ This method requires temporary access to a second device that is already running
[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
-This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). Este método ainda não está completo, e como tal, é apenas uma página reservada.
{% endcapture %}
diff --git a/_pages/pt_PT/finalizing-setup.txt b/_pages/pt_PT/finalizing-setup.txt
index 06d9756561..2f0d1d1311 100644
--- a/_pages/pt_PT/finalizing-setup.txt
+++ b/_pages/pt_PT/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/pt_PT/flashing-ntrboot-(custom-firmware).txt b/_pages/pt_PT/flashing-ntrboot-(custom-firmware).txt
index 8148e2f8f3..6cdf2c69ab 100644
--- a/_pages/pt_PT/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/pt_PT/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt
index f38452a25f..9cf986e51d 100644
--- a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt
+++ b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/pt_PT/ntrboot.txt b/_pages/pt_PT/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/pt_PT/ntrboot.txt
+++ b/_pages/pt_PT/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ro_RO/finalizing-setup.txt b/_pages/ro_RO/finalizing-setup.txt
index eafe765a22..6088e3b2f3 100644
--- a/_pages/ro_RO/finalizing-setup.txt
+++ b/_pages/ro_RO/finalizing-setup.txt
@@ -35,7 +35,6 @@ Pe parcursul acestui proces, vom instala și programe ca următoarele:
1. Introduceți cardul SD în calculator
1. Copiați `FBI.3dsx` în folderul `/3ds/` de pe cardul SD
1. Creați un folder numit `cias` pe rădăcina cardului SD dacă nu există deja
-1. Creați un folder numit `hblauncherloader` pe rădăcina cardului SD dacă nu există deja
1. Copiați `hblauncher_loader.cia` din arhiva `.zip` hblauncher_loader în folderul `/cias/` de pe cardul SD
1. Copiați `lumaupdater.cia` în folderul `/cias/` de pe cardul SD
1. Copiați `FBI.cia` în folderul `/cias/` de pe cardul SD
diff --git a/_pages/ro_RO/flashing-ntrboot-(custom-firmware).txt b/_pages/ro_RO/flashing-ntrboot-(custom-firmware).txt
index 5034b94eb4..32cfbbb3b6 100644
--- a/_pages/ro_RO/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/ro_RO/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ro_RO/get-started.txt b/_pages/ro_RO/get-started.txt
index c9d98e094c..4aafdc3754 100644
--- a/_pages/ro_RO/get-started.txt
+++ b/_pages/ro_RO/get-started.txt
@@ -2,7 +2,7 @@
title: "Începeți"
---
-Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Această pagină vă va arăta de unde să începeți pentru dispozitivul dumneavoastră.
+Modelele diferite de dispozitive, versiuni și regiuni vor avea nevoie de pași diferiți pentru a ajunge la scopul de a avea Custom Firmware cu boot9strap. Această pagină vă va arăta de unde să începeți pentru dispozitivul dumneavoastră.
Apăsați pe imaginea dispozitivului dumneavoastră ca să mergeți pe pagina corespunzătoare. Culoarea dispozitivelor din imagine poate varia, dar fiți atent la poziția butoanelor și a caracteristicilor fiecărui dispozitiv ca să aveți grijă că selectați dispozitivul corect.
diff --git a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt
index 37a870ac06..8363b2ef57 100644
--- a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Închideți dispozitivul
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller
diff --git a/_pages/ro_RO/ntrboot.txt b/_pages/ro_RO/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/ro_RO/ntrboot.txt
+++ b/_pages/ro_RO/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt
index bdb6414a01..aa4ab7ddc1 100644
--- a/_pages/ru_RU/finalizing-setup.txt
+++ b/_pages/ru_RU/finalizing-setup.txt
@@ -35,7 +35,6 @@ title: "Завершение установки"
1. Вставьте SD-карту в компьютер
1. Скопируйте `FBI.3dsx` в папку `/3ds/` на SD-карте
1. Создайте папку `cias` в корне SD-карты, если таковой нет
-1. Создайте папку `hblauncherloader` в корне SD-карты, если таковой нет
1. Скопируйте `hblauncher_loader.cia` из архива hblauncher_loader в папку `/cias/` в корне SD-карты
1. Скопируйте `lumaupdater.cia` в папку `/cias/` на SD-карте
1. Скопируйте `FBI.cia` в папку `/cias/` в корне SD-карты
diff --git a/_pages/ru_RU/flashing-ntrboot-(custom-firmware).txt b/_pages/ru_RU/flashing-ntrboot-(custom-firmware).txt
index 5f4acbf420..05c00d301c 100644
--- a/_pages/ru_RU/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/ru_RU/flashing-ntrboot-(custom-firmware).txt
@@ -1,24 +1,23 @@
---
-title: "Flashing ntrboot (Custom Firmware)"
+title: "Прошивка ntrboot (Кастомная прошивка)"
---
-Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
+Прежде чем продолжить, убедитесь что вы прочитали всю информацию на странице [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Обратите внимание, что флешкартридж не сможет использоваться для своих стандартных функций, пока на нем установлен эксплойт ntrboot (кроме Acekard 2i, который сохраняет функционал, *но только на консолях 3DS с кастомной прошивкой*). В конце инструкций по прошивке ntrboot есть дополнительные шаги, чтобы по окончанию удалить его с флешкартриджа.
-Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+Обратите внимание, что в некоторых редких случаях процесс прошивки может **брикнуть** поддельный флешкартридж и навсегда сделать его нерабочим. Это маловероятно, но тем не менее поддерживаются только оригинальные флешкартриджи из списка. Чтобы уменьшить вероятность получения поддельного картриджа, рекомендуется использовать проверенный сайт для покупки флешкартриджа (например [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
#### Что понадобится
-* Your ntrboot compatible DS / DSi flashcart:
- + Either the Acekard 2i or R4i Gold 3DS RTS
-* Two 3DS family devices
- + **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
- + **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
-* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
+* DS / DSi флешкартридж, совместимый с ntrboot:
+ + Acekard 2i или R4i Gold 3DS RTS
+* Две консоли семейства 3DS
+ + **Исходная 3DS**: консоль семейства 3DS с установленной кастомной прошивкой (например boot9strap или arm9loaderhax)
+ + **Целевая 3DS**: консоль с официальной прошивкой
+* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; не `devkit-файл`)*
+* Свежая версия [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
#### Инструкция
@@ -26,27 +25,27 @@ Note that in some rare circumstances, it may be possible for the flashing proces
1. Выключите **исходную 3DS**
1. Вставьте SD-карту **исходной 3DS** в компьютер
-1. Create a folder named `ntrboot` on the root of your SD card
-1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
-1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
-1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
-1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+1. Создайте папку `ntrboot` в корне SD-карты
+1. Скопируйте `boot9strap_ntr.firm` и `boot9strap_ntr.firm.sha` из `.zip-архива` boot9strap в папку `/ntrboot/` в корне SD-карты
+1. Скопируйте `ntrboot_flasher.firm` из `.zip-архива` ntrboot_flasher в папку `/luma/payloads/` на SD-карте **исходной 3DS**
+1. Вставьте SD-карту **исходной 3DS** обратно в **исходную 3DS**
+1. Вставьте ваш DS / DSi флешкартридж, совместимый с ntrboot, в **исходную 3DS**
-##### Section II - Flashing ntrboot
+##### Часть II - Прошивка ntrboot
-1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
-1. Select "ntrboot_flasher"
-1. Select "Dump Flash"
-1. Wait until the process is completed
+1. Запустите Luma3DS chainloader, держа нажатой кнопку (Start) во время загрузки на **исходной 3DS**
+1. Выберите "ntrboot_flasher"
+1. Выберите "Dump Flash"
+1. Дождитесь окончания процесса
1. Нажмите (B) для возврата в главное меню
-1. Select "Inject Ntrboot"
-1. Press (Y) to proceed
-1. Press (R) for retail unit ntrboot
-1. Wait until the process is completed
+1. Выберите "Inject Ntrboot"
+1. Нажмите (Y) чтобы продолжить
+1. Нажмите (R) чтобы выбрать "retail unit ntrboot"
+1. Дождитесь окончания процесса
1. Нажмите (B) для возврата в главное меню
-1. Select "EXIT" to power off **the source 3DS**
+1. Выберите "EXIT" чтобы выключить **исходную 3DS**
___
-Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+Следующий шаг: [Установка boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ru_RU/flashing-ntrboot-(powersaves).txt b/_pages/ru_RU/flashing-ntrboot-(powersaves).txt
index e2a38cf696..7ff0a1a4e8 100644
--- a/_pages/ru_RU/flashing-ntrboot-(powersaves).txt
+++ b/_pages/ru_RU/flashing-ntrboot-(powersaves).txt
@@ -1,5 +1,5 @@
----
-title: "Flashing ntrboot (Powersaves)"
----
-
-This method is not yet complete, and as such is just a placeholder page.
\ No newline at end of file
+---
+title: "Прошивка ntrboot (Powersaves)"
+---
+
+Этот метод еще не завершен, поэтому здесь просто пустая страница.
\ No newline at end of file
diff --git a/_pages/ru_RU/get-started-(new-3ds).txt b/_pages/ru_RU/get-started-(new-3ds).txt
index b70c8db93a..f7656f96df 100644
--- a/_pages/ru_RU/get-started-(new-3ds).txt
+++ b/_pages/ru_RU/get-started-(new-3ds).txt
@@ -4,7 +4,7 @@ title: "Начало (New 3DS)"
Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0.
-Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. В настоящее время версия браузера не имеет значения для New 3DS в данном руководстве.
+Кроме того, последнее число вашей версии прошивки (после тире) относится к версии браузера. В настоящее время версия браузера не имеет значения для New 3DS в данном руководстве.
Любую версию системного ПО можно обновить на более высокую из этой же колонки [с помощью картриджа](cart-update) и после этого продолжать выполнять инструкцию.
@@ -54,7 +54,7 @@ Additionally, note that the last number of your system version (which is precede
ВСЕ ВЕРСИИ
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Требуется совместимый флешкартридж) или Установка boot9strap (Hardmod)
(Требуется пайка) |
\ No newline at end of file
diff --git a/_pages/ru_RU/get-started-(old-3ds).txt b/_pages/ru_RU/get-started-(old-3ds).txt
index c0d592c17f..eb9ae565de 100644
--- a/_pages/ru_RU/get-started-(old-3ds).txt
+++ b/_pages/ru_RU/get-started-(old-3ds).txt
@@ -4,7 +4,7 @@ title: "Начало (Old 3DS)"
Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Если версия оканчивается на -0, значит, у вас отсутствует браузер, любое другое число больше 0 говорит о том, что браузер установлен.
+Кроме того, два последних столбца относятся к последнему числу версии прошивки вашего устройства (которая обозначает версию установленного в системе браузера). Если версия оканчивается на -0, значит, у вас отсутствует браузер, любое другое число больше 0 говорит о том, что браузер установлен.
Например, если у вас версия прошивки "5.0.0-0E", необходимо выбрать ячейку на пересечении колонки "Без браузера" и ряда "С 5.0.0 по 5.1.0" так как версия системы находится в этом диапазоне и в системе не установлен браузер.
@@ -89,7 +89,7 @@ Additionally, note that the last two columns of the chart refer to the last numb
ВСЕ ВЕРСИИ
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Требуется совместимый флешкартридж) или Установка boot9strap (Hardmod)
(Требуется пайка) |
\ No newline at end of file
diff --git a/_pages/ru_RU/get-started.txt b/_pages/ru_RU/get-started.txt
index 050faf8d14..a14015a302 100644
--- a/_pages/ru_RU/get-started.txt
+++ b/_pages/ru_RU/get-started.txt
@@ -2,7 +2,7 @@
title: "Начало"
---
-Different device models and versions will require different steps to achieve the end goal of boot9strap Custom Firmware. Эта страница поможет вам понять, откуда именно следует начать.
+Разные модели устройств и версии прошивок требуют различных действий для установки кастомной прошивки с boot9strap. Эта страница поможет вам понять, откуда именно следует начать.
Нажмите на изображение вашего устройства, чтобы перейти на соответствующую страницу. Цвет вашего устройства может отличаться от представленного на картинках, вам стоит обратить внимание на расположение кнопок и особенности каждого типа устройства, чтобы сделать правильный выбор.
diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt
index ceeb3bd8ca..7feca2e39f 100644
--- a/_pages/ru_RU/home.txt
+++ b/_pages/ru_RU/home.txt
@@ -37,7 +37,7 @@ excerpt: "Полное руководство по прошивке 3DS,
**Кастомная прошивка** ("CFW", "кастом") позволяет использовать более продвинутые инструменты, чем простые homebrew. Например, можно устанавливать неподписанное ПО и запускать его прямо из меню HOME.
-CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0).
+Кастомная прошивка может быть установлена на любую консоль с любой прошивкой (для версий прошивки >11.3.0 могут потребоваться дополнительные инструменты / аксессуары).
## Что устанавливается в этом руководстве?
diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware).txt b/_pages/ru_RU/installing-boot9strap-(dsiware).txt
index 6eaf7f3a33..9c09be9714 100644
--- a/_pages/ru_RU/installing-boot9strap-(dsiware).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware).txt
@@ -20,7 +20,7 @@ title: "Установка boot9strap (DSiWare)"
Обе приставки ДОЛЖНЫ быть одного региона.
{: .notice--warning}
-In both of these methods, the source 3DS's NNID will be stuck on the target 3DS unless you either system transfer back or call Nintendo (details can be found in the instructions)! Перенос системы можно делать лишь раз в неделю для одного NNID.
+В обоих этих методах NNID исходной 3DS будет находится на целевой 3DS до тех пор, пока вы не выполните обратную Передачу данных, либо не позвоните в Nintendo (детали можно найти в инструкциях)! Перенос системы можно делать лишь раз в неделю для одного NNID.
{: .notice--danger}
___
diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt
index 059f34e6d0..489e220ff6 100644
--- a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt
@@ -13,9 +13,9 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)"
#### Что понадобится
-* Two 3DS family devices
- + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the device on stock firmware *on 11.5.0*
+* Две консоли семейства 3DS
+ + **Исходная 3DS**: консоль с кастомной прошивкой (boot9strap или arm9loaderhax) *с последней версией системного ПО*
+ + **Целевая 3DS**: консоль с официальной прошивкой *11.5.0*
* Купленная (или уже имеющаяся) совместимая DSiWare-игра из eShop на **исходной 3DS**
+ Пиратская копия игры **НЕ** будет работать
+ Для списка совместимых игр обратитесь к [Установка boot9strap (Список уязвимых игр DSiWare)](installing-boot9strap-(dsiware-game-injection-list))
diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection-list).txt
index be2c7b89ea..d58c45a13c 100644
--- a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection-list).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection-list).txt
@@ -8,7 +8,7 @@ title: "Установка boot9strap (Список уязвимых игр DSiW
QR-коды можно отсканировать, нажав (L + R) на домашнем экране и выбрав иконку QR на нижнем экране приставки.
-The following size requirements are because the injected DSiWare and its hacked save must not modify their respective file sizes in order to system transfer properly, meaning that the donor DSiWare must be large enough to fit the hacked DSiWare.
+Требования к размеру ниже связаны с условием, что измененная игра и ее сохранение не должны измениться в размере, иначе Передача данных не пройдет корректно. Это значит, что донорская DSiWare-игра должна быть достаточно большой, чтобы вместить взломанную DSiWare-игру.
{% capture notice-list %}
diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt
index 0ab08fe318..ff13bb7f70 100644
--- a/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt
@@ -13,9 +13,9 @@ title: "Установка boot9strap (Инъекция в сохранения
#### Что понадобится
-* Two 3DS family devices
- + **The source 3DS**: the device running some kind of custom firmware (such as boot9strap or arm9loaderhax) *on the latest version*
- + **The target 3DS**: the device on stock firmware *on 11.5.0*
+* Две консоли семейства 3DS
+ + **Исходная 3DS**: консоль с кастомной прошивкой (boot9strap или arm9loaderhax) *с последней версией системного ПО*
+ + **Целевая 3DS**: консоль с официальной прошивкой *11.5.0*
* Купленная DSiWare игра из списка ниже (пиратская копия **не** будет работать) на **исходной 3DS**
+ **Fieldrunners**
+ **Legends of Exidia**
diff --git a/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt b/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt
index 911a31040d..16cd0e97ac 100644
--- a/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt
@@ -19,8 +19,8 @@ title: "Установка boot9strap (Homebrew Launcher)"
+ Если "PM INIT FAILED" *всё ещё* появляется, попробуйте использовать [safehax версии r19](https://github.com/TiniVi/safehax/releases/tag/r19)
+ При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова
1. Если эксплойт сработал, запустится SafeB9SInstaller
- + If you launch into the Luma3DS configuration menu instead of SafeB9SInstaller, power off your device and ensure that `safehaxpayload.bin` exists on the root of your SD card
- + If it appears that `safehaxpayload.bin` exists on the root of your SD card but you still launch into the Luma3DS configuration menu, ensure you have [enabled the option to show file extensions](file-extensions-(windows))
+ + Если вместо SafeB9SInstaller запускается меню конфигурации Luma3DS, убедитесь что файл `safehaxpayload.bin` присутствует в корне вашей SD-карты
+ + Если файл `safehaxpayload.bin` присутствует в корне вашей SD-карты, но по-прежнему запускается меню конфигурации Luma3DS, убедитесь что вы [включили отображение расширений файлов](file-extensions-(windows))
##### Часть II - Установка boot9strap
diff --git a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt
index 4520c2ae02..4d7456f33b 100644
--- a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt
@@ -1,11 +1,11 @@
---
-title: "Installing boot9strap (ntrboot)"
+title: "Установка boot9strap (ntrboot)"
---
#### Что понадобится
-* A magnet that triggers the sleep mode of your device (if using a folding style device)
-* Your ntrboot flashed flashcart
+* Магнит для ввода консоли в режим ожидания (если используется консоль складной конструкции)
+* Флешкартридж с прошитым ntrboot
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)*
* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
@@ -17,7 +17,7 @@ title: "Installing boot9strap (ntrboot)"
1. Выключите консоль
1. Вставьте SD-карту в компьютер
-1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
+1. Скопируйте `SafeB9SInstaller.firm` в корень SD-карты и переименуйте его в `boot.firm`
1. Скопируйте _содержимое_ `starter.zip` в корень вашей SD-карты
1. Создайте папку `boot9strap` в корне SD-карты
1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты
@@ -28,27 +28,29 @@ title: "Installing boot9strap (ntrboot)"
1. Вставьте SD-карту обратно в консоль
1. Включите консоль
-##### Section II - ntrboot
+##### Часть II - ntrboot
-1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+1. Используйте магнит, чтобы найти место на консоли, где срабатывает датчик режима ожидания
+ + Этот шаг не требуется выполнять для консоли old 2DS (которая имеет переключатель режима ожидания)
1. Выключите консоль
-1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
- + It may take a few attempts to get this to work because the positioning is awkward
+1. Вставьте ваш флешкартридж в консоль
+1. Поместите магнит на место, где срабатывает датчик режима ожидания
+ + На консоли old 2DS вместо этого включите переключатель режима ожидания
+1. На несколько секунд зажмите кнопки (Power) + (Start) + (Select) + (X), затем отпустите
+ + Может потребоваться несколько попыток, поскольку позиционирование неудобное
1. Если эксплойт сработал, запустится SafeB9SInstaller
##### Часть III - Установка boot9strap
1. Дождитесь окончания всех проверок безопасности
1. При появлении запроса, введите указанную комбинацию кнопок для установки boot9strap
-1. Once it has completed, force your device to power off by holding down the power button
- + Your device will only boot to the SafeB9SInstaller screen until the next section is completed
+1. После завершения принудительно выключите консоль, удерживая кнопку питания
+ + Ваша консоль будет загружаться только в SafeB9SInstaller до выполнения следующей части
##### Часть IV - Настройка Luma3DS
1. Вставьте SD-карту в компьютер
-1. Delete `boot.firm` from the root of your SD card
+1. Удалите файл `boot.firm` из корня SD-карты
1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты
1. Вставьте SD-карту обратно в консоль
1. Включите консоль
@@ -66,18 +68,18 @@ ___
___
-##### Section V - Removing ntrboot
+##### Часть V - Удаление ntrboot
-This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
+Это дополнительный раздел, который позволит вернуть флешкартридж в исходное состояние (чтобы использовать флешкартридж для его стандартных функций).
{: .notice--info}
-Do not follow this section until you have completed the rest of the instructions on this page.
+Не приступайте к этой части, пока вы не выполнили остальные инструкции на этой странице.
{: .notice--warning}
-1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
-1. Select "ntrboot_flasher"
-1. Select "Restore Flash"
-1. Press (Y) to proceed
+1. Запустите Luma3DS chainloader, держа нажатой кнопку (Start) во время загрузки на **исходной 3DS**
+1. Выберите "ntrboot_flasher"
+1. Выберите "Restore Flash"
+1. Нажмите (Y) чтобы продолжить
1. Дождитесь окончания проверки
1. Нажмите (B) для возврата в главное меню
-1. Select "EXIT" to power off **the source 3DS**
\ No newline at end of file
+1. Выберите "EXIT" чтобы выключить **исходную 3DS**
\ No newline at end of file
diff --git a/_pages/ru_RU/ntr-and-cubic-ninja.txt b/_pages/ru_RU/ntr-and-cubic-ninja.txt
index 5409a466a4..581a7e4a80 100644
--- a/_pages/ru_RU/ntr-and-cubic-ninja.txt
+++ b/_pages/ru_RU/ntr-and-cubic-ninja.txt
@@ -4,7 +4,7 @@ title: "NTR и Cubic Ninja"
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
-NTR Cubic Ninja will work for JPN New 3DS ONLY!
+NTR Cubic Ninja работает ТОЛЬКО на японских New 3DS!
{: .notice--warning}
#### Что понадобится
diff --git a/_pages/ru_RU/ntrboot.txt b/_pages/ru_RU/ntrboot.txt
index 45750a7535..e8464eddbe 100644
--- a/_pages/ru_RU/ntrboot.txt
+++ b/_pages/ru_RU/ntrboot.txt
@@ -2,33 +2,33 @@
title: "ntrboot"
---
-If you already flashed ntrboot to your flashcart, you can follow [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
+Если вы уже прошили ntrboot на ваш флешкартридж, вы можете перейти к странице [Установка boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) для получения инструкций о том, как его использовать.
{: .notice--success}
-Installing boot9strap with ntrboot requires a compatible DS / DSi flashcart to flash ntrboot to. The current list of compatible flashcarts is as followed:
+Для установки boot9strap при помощи ntrboot требуется совместимый DS / DSi флешкартридж, на который можно прошить ntrboot. Текущий список совместимых флешкартриджей указан ниже:
+ [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
+ [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
-There are two different methods of flashing ntrboot to your flashcart.
+Существует два различных способа прошивки ntrboot на флешкартридж.
-Both of these methods require access to a small magnet if the target device is a of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons.
+Оба этих метода требуют наличия небольшого магнита, если целевая консоль имеет складную конструкцию (любая консоль семейства 3DS кроме old 2DS с переключателем режима ожидания). Это необходимо, потому что эксплойт требует ввести консоль в режим ожидания, сохранив при этом доступ к кнопкам.
-To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
+Чтобы проверить работоспособность магнита, приложите его к кнопкам (A)(B)(X)(Y) или рядом с ними, когда консоль включена. Проверьте, включает ли он режим ожидания. Если это так, то оба экрана будут выключаться, пока магнит находится на этом месте.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Обратите внимание, что флешкартридж не сможет использоваться для своих стандартных функций, пока на нем установлен эксплойт ntrboot (кроме Acekard 2i, который сохраняет функционал, *но только на консолях 3DS с кастомной прошивкой*). В конце инструкций по прошивке ntrboot есть дополнительные шаги, чтобы по окончанию удалить его с флешкартриджа.
-Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+Обратите внимание, что в некоторых редких случаях процесс прошивки может **брикнуть** поддельный флешкартридж и навсегда сделать его нерабочим. Это маловероятно, но тем не менее поддерживаются только оригинальные флешкартриджи из списка. Чтобы уменьшить вероятность получения поддельного картриджа, рекомендуется использовать проверенный сайт для покупки флешкартриджа (например [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
___
{% capture notice-1 %}
-[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+[Прошивка ntrboot (Кастомная прошивка)](flashing-ntrboot-(custom-firmware))
-This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).
+Этот метод требует временный доступ ко второй консоли с установленной кастомной прошивкой (например boot9strap или arm9loaderhax).
{% endcapture %}
@@ -36,9 +36,9 @@ This method requires temporary access to a second device that is already running
{% capture notice-1 %}
-[Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+[Прошивка ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
-This method, once ready, will require temporary access to a [Powersaves](https://amzn.to/2fb3VY7). This method is not yet complete, and as such is just a placeholder page.
+Этот метод, как только он будет готов, потребует временный доступ к [Powersaves](https://amzn.to/2fb3VY7). Этот метод еще не завершен, поэтому здесь просто пустая страница.
{% endcapture %}
diff --git a/_pages/ru_RU/region-changing.txt b/_pages/ru_RU/region-changing.txt
index a755615e35..44cffcd755 100644
--- a/_pages/ru_RU/region-changing.txt
+++ b/_pages/ru_RU/region-changing.txt
@@ -4,7 +4,7 @@ title: "Смена региона"
Этот дополнительный раздел рассказывает о смене региона на вашей приставке с кастомной прошивкой (CFW SysNAND). Это делается путем установки образа 9.2.0 CTRTransfer того региона, на который вы хотите перейти.
-Note that region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
+Обратите внимание, что смена региона абсолютно не обязательна с тех пор, как Luma3DS поддерживает запуск игр других регионов и индивидуальную [эмуляцию региона для отдельных игр](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) (англ.).
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
@@ -16,14 +16,14 @@ Note that region changing is almost completely unnecessary since Luma3DS support
После этого только **New 3DS, которая никогда до этого не была привязана к eShop** и **любая Old 3DS** смогут подключиться к eShop и использовать все его возможности уже в новом регионе. New 3DS, которые сменили регион и уже подключались к eShop на оригинальном регионе, не смогут создать новый NNID и подключаться к eShop с новым регионом!
{: .notice--warning}
-Заметьте, что иногда eShop не работает там, где он, казалось бы, должен работать. Такое поведение объясняется особенностями работы серверов Nintendo, и я не могу на них повлиять. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Причины на данный момент неизвестны.
+Заметьте, что иногда eShop не работает там, где он, казалось бы, должен работать. Такое поведение объясняется особенностями работы серверов Nintendo, и я не могу на них повлиять. Кроме того, иногда eShop работает там, где не должен (например на некоторых New 3DS). Причины на данный момент неизвестны.
Смена региона при помощи CTRTransfer (что используется в этом методе) по какой-то причине ломает reboot-патч. Причина этого неизвестна, но из-за этого владельцы Old 3DS теряют возможность играть в игры, требующие режим расширенной оперативной памяти (например, Monster Hunter, Super Smash Bros, и Pokémon Sun / Moon) до тех пор, пока не выполнят форматирование устройства.
-Never format a New 2DS XL while on a version <11.4.0 or you will be unable to complete initial setup!
+Никогда не форматируйте New 2DS XL на прошивках ниже 11.4.0, иначе вы не сможете закончить первоначальную настройку!
{: .notice--danger}
-You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.
+Для продолжения, у вас уже ДОЛЖНА быть установлена Luma3DS и boot9strap или arm9loaderhax.
{: .notice--danger}
#### Что понадобится
diff --git a/_pages/ru_RU/site-navigation.txt b/_pages/ru_RU/site-navigation.txt
index 97f6ee28b4..2bfb98a0de 100644
--- a/_pages/ru_RU/site-navigation.txt
+++ b/_pages/ru_RU/site-navigation.txt
@@ -26,8 +26,8 @@ sitemap: false
+ [FAQ](faq)
+ [Расширения файлов (Windows)](file-extensions-(windows))
+ [Завершение установки](finalizing-setup)
-+ [Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
-+ [Flashing ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
++ [Прошивка ntrboot (Кастомная прошивка)](flashing-ntrboot-(custom-firmware))
++ [Прошивка ntrboot (Powersaves)](flashing-ntrboot-(powersaves))
+ [Начало (New 3DS)](get-started-(new-3ds))
+ [Начало (Old 3DS)](get-started-(old-3ds))
+ [Начало](get-started)
diff --git a/_pages/ru_RU/troubleshooting.txt b/_pages/ru_RU/troubleshooting.txt
index 39102cf543..a2acf59616 100644
--- a/_pages/ru_RU/troubleshooting.txt
+++ b/_pages/ru_RU/troubleshooting.txt
@@ -5,7 +5,7 @@ title: "Проблемы и их решения"
Если ваша консоль не загружается, найдите раздел, соответствующий вашей проблеме, и следуйте его инструкциям. После решения возникшей проблемы, вернитесь к основному руководству
(Этот раздел весьма обширный, воспользуйтесь Ctrl+F для поиска своей проблемы)
-If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.
+Если решения вашей проблемы здесь не оказалось, то загрузите содержимое всех .log файлов из корня SD-карты на [Gist](https://gist.github.com/), а затем обращайтесь за помощью, детально описав проблему и испробованные способы решения.
Для использования [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme)-ссылок в этом руководстве необходим torrent-клиент, например [Deluge](http://dev.deluge-torrent.org/wiki/Download)
diff --git a/_pages/sr_SP/finalizing-setup.txt b/_pages/sr_SP/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/sr_SP/finalizing-setup.txt
+++ b/_pages/sr_SP/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/sr_SP/flashing-ntrboot-(custom-firmware).txt b/_pages/sr_SP/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/sr_SP/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/sr_SP/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/sr_SP/installing-boot9strap-(ntrboot).txt b/_pages/sr_SP/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/sr_SP/installing-boot9strap-(ntrboot).txt
+++ b/_pages/sr_SP/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/sr_SP/ntrboot.txt b/_pages/sr_SP/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/sr_SP/ntrboot.txt
+++ b/_pages/sr_SP/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/sv_SE/finalizing-setup.txt b/_pages/sv_SE/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/sv_SE/finalizing-setup.txt
+++ b/_pages/sv_SE/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/sv_SE/flashing-ntrboot-(custom-firmware).txt b/_pages/sv_SE/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/sv_SE/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/sv_SE/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt
+++ b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/sv_SE/ntrboot.txt b/_pages/sv_SE/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/sv_SE/ntrboot.txt
+++ b/_pages/sv_SE/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/th_TH/finalizing-setup.txt b/_pages/th_TH/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/th_TH/finalizing-setup.txt
+++ b/_pages/th_TH/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/th_TH/flashing-ntrboot-(custom-firmware).txt b/_pages/th_TH/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/th_TH/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/th_TH/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/th_TH/installing-boot9strap-(ntrboot).txt b/_pages/th_TH/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/th_TH/installing-boot9strap-(ntrboot).txt
+++ b/_pages/th_TH/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/th_TH/ntrboot.txt b/_pages/th_TH/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/th_TH/ntrboot.txt
+++ b/_pages/th_TH/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/tr_TR/finalizing-setup.txt b/_pages/tr_TR/finalizing-setup.txt
index 9de80558e3..4913fffc0b 100644
--- a/_pages/tr_TR/finalizing-setup.txt
+++ b/_pages/tr_TR/finalizing-setup.txt
@@ -35,7 +35,6 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz:
1. SD kartınızı bilgisayarınıza takın
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. SD kartınızın ana dizininde eğer yoksa `cias` isminde klasör oluşturun
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. `hblauncher_loader.cia` dosyasını hblauncher_loader`.zip` dosyasından SD kartınızdaki `/ cias /` klasörüne kopyalayın
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/tr_TR/flashing-ntrboot-(custom-firmware).txt b/_pages/tr_TR/flashing-ntrboot-(custom-firmware).txt
index edf4793a5c..dd41342591 100644
--- a/_pages/tr_TR/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/tr_TR/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt
index 6bd40c2911..c9cccab694 100644
--- a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Cihazınızı kapatın
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/tr_TR/ntrboot.txt b/_pages/tr_TR/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/tr_TR/ntrboot.txt
+++ b/_pages/tr_TR/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/uk_UA/finalizing-setup.txt b/_pages/uk_UA/finalizing-setup.txt
index e462ce4bfe..087dd9b52c 100644
--- a/_pages/uk_UA/finalizing-setup.txt
+++ b/_pages/uk_UA/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/uk_UA/flashing-ntrboot-(custom-firmware).txt b/_pages/uk_UA/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/uk_UA/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/uk_UA/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt
+++ b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/uk_UA/ntrboot.txt b/_pages/uk_UA/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/uk_UA/ntrboot.txt
+++ b/_pages/uk_UA/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/vi_VN/finalizing-setup.txt b/_pages/vi_VN/finalizing-setup.txt
index 6997322565..a3302f3dda 100644
--- a/_pages/vi_VN/finalizing-setup.txt
+++ b/_pages/vi_VN/finalizing-setup.txt
@@ -35,7 +35,6 @@ During this process, we also setup programs such as the following:
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/vi_VN/flashing-ntrboot-(custom-firmware).txt b/_pages/vi_VN/flashing-ntrboot-(custom-firmware).txt
index 860dd16f48..20e163ee6a 100644
--- a/_pages/vi_VN/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/vi_VN/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt
index 0ae838b75d..ad9f540551 100644
--- a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt
+++ b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/vi_VN/ntrboot.txt b/_pages/vi_VN/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/vi_VN/ntrboot.txt
+++ b/_pages/vi_VN/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/zh_CN/finalizing-setup.txt b/_pages/zh_CN/finalizing-setup.txt
index 7ad439b92e..d601a14e5e 100644
--- a/_pages/zh_CN/finalizing-setup.txt
+++ b/_pages/zh_CN/finalizing-setup.txt
@@ -35,7 +35,6 @@ In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/)
1. Insert your SD card into your computer
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. 解压hblauncher_loader压缩包，并复制 `hblauncher_loader.cia` 到你SD卡的 `/cias/` 目录
1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card
1. Copy `FBI.cia` to the `/cias/` folder on your SD card
diff --git a/_pages/zh_CN/flashing-ntrboot-(custom-firmware).txt b/_pages/zh_CN/flashing-ntrboot-(custom-firmware).txt
index 746b824108..803e6b248e 100644
--- a/_pages/zh_CN/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/zh_CN/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
index afcdfa8b08..5d634a2add 100644
--- a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
+++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
diff --git a/_pages/zh_CN/ntrboot.txt b/_pages/zh_CN/ntrboot.txt
index 45750a7535..378da089aa 100644
--- a/_pages/zh_CN/ntrboot.txt
+++ b/_pages/zh_CN/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt
index 27a6dc1ead..895cc1a5bc 100644
--- a/_pages/zh_TW/finalizing-setup.txt
+++ b/_pages/zh_TW/finalizing-setup.txt
@@ -35,7 +35,6 @@ title: "完成安裝"
1. 將 SD 卡插入電腦中
1. 將 `FBI.3dsx` 複製到 SD 卡中的 `/3ds/` 資料夾底下
1. 在 SD 卡的根目錄底下建立一個新資料夾 `cias`
-1. 在 SD 卡的根目錄底下建立一個新資料夾 `hblauncherloader`
1. 解壓 hblauncher_loader `.zip` 中的 `hblauncher_loader.cia` 到 SD 卡中的 `/cias/` 資料夾底下
1. 複製 `lumaupdater.cia` 檔案至 SD 卡上的 `/cias/` 資料夾中
1. 將 `FBI.cia` 複製到 SD 卡中 `/cias/` 資料夾底下
diff --git a/_pages/zh_TW/flashing-ntrboot-(custom-firmware).txt b/_pages/zh_TW/flashing-ntrboot-(custom-firmware).txt
index 5832495f9a..b86630944f 100644
--- a/_pages/zh_TW/flashing-ntrboot-(custom-firmware).txt
+++ b/_pages/zh_TW/flashing-ntrboot-(custom-firmware).txt
@@ -4,8 +4,7 @@ title: "Flashing ntrboot (Custom Firmware)"
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
-{: .notice--warning}
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
index 12823829fe..02be43ffb8 100644
--- a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
+++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
@@ -31,10 +31,12 @@ title: "Installing boot9strap (ntrboot)"
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
- + This step is not needed on non-folding style devices (such as the old 2DS)
+ + This step is not needed on the old 2DS (which has a sleep mode switch)
1. 關閉您的主機
1. Insert your flashcart into your device
-1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
+1. Place the magnet on your device to trigger the sleep sensor
+ + On old 2DS, you should instead enable the sleep mode switch
+1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. 如果一切成功的話，您將自動進入 SafeB9SInstaller
diff --git a/_pages/zh_TW/ntrboot.txt b/_pages/zh_TW/ntrboot.txt
index 45750a7535..6dcb956f51 100644
--- a/_pages/zh_TW/ntrboot.txt
+++ b/_pages/zh_TW/ntrboot.txt
@@ -17,7 +17,7 @@ Both of these methods require access to a small magnet if the target device is a
To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot.
{: .notice--info}
-Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
+Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on 3DS systems with custom firmware installed only*). There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
@@ -26,7 +26,7 @@ ___
{% capture notice-1 %}
-[Flashing ntrboot (Custom Firmware)](flashing-ntrboot-(custom-firmware))
+[寫入 ntrboot 漏洞（透過自製韌體）](flashing-ntrboot-(custom-firmware))
This method requires temporary access to a second device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax).