New Crowdin translations (#1210)
This commit is contained in:
Devon Maloney
GitHub
parent
7df0ec7559
commit
214b518e40
30 changed files with 30 additions and 30 deletions
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
|
|||
+ Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
|
||||
+ Si cela vous donne encore une erreur et que votre NAND est en dessous de 9.2.0, [suivez 9.2.0 CTRTransfer](9.2.0-ctrtransfer), puis essayez de mettre à jour à nouveau
|
||||
1. Si votre console était dans un fimware antérieur à 9.0.0 avant la mise à jour, remplacez `boot.firm` à la racine de votre carte SD avec celui de [la dernière version de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Si votre console était dans un firmware compris entre 3.0.0 et 4.5.0 avant la mise à jour, Supprimez `native.firm` et `cetk` de votre dossier `/luma/`sur votre carte SD
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Lancez FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ title: "סיום התהליך"
|
|||
+ אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
|
||||
+ אם זה ממשיך לתת לכם שגיאה והקונסולה שלכם מתחת לגרסה 9.2.0, עקבו אחרי [9.2.0 CTRtransfer](9.2.0-ctrtransfer), ואז תנסו לעדכן שוב
|
||||
1. אם הקונסולה שלכם הייתה מתחת לגרסה 9.0.0 לפני שעדכנתם אותה, תחליפו את ה`boot.firm` על שורש כרטיס הSD שלכם עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. אם הקונסולה שלכם הייתה על גרסה בין 3.0.0 ו4.5.0 לפני שעדכנתם, תמחקו את `native.firm` ואת `cetk` מתיקיית `/luma/` בכרטיס הSD שלכם
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### חלק III - הפעלת FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ エラーが発生すれば、DNS設定を「自動」に変更してください
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ 오류가 발생한다면, DNS 설정을 "자동"으로 설정해 주세요.
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Jika terdapat error, set DNS settings anda ke "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Als dit je een foutmelding geeft, zet dan je DNS instellingen op "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Hvis dette gir deg en feil, sett DNS-innstillingene til "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Jeśli przy próbie aktualizacji pojawia się błąd, ustaw swoje DNS (w ustawieniach połączenia internetowego 3DS) na "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
|
|||
+ Se isso der um erro, defina suas configurações de DNS para "Automático"
|
||||
+ Se isso ainda lhe dá um erro e sua NAND está abaixo de 9.2.0, [siga CTRTransfer para 9.2.0](9.2.0-ctrtransfer) e, em seguida, tente atualizar novamente
|
||||
1. Se seu dispositivo estava em uma versão abaixo da 9.0.0 antes de atualizar, substitua `boot.firm` na raiz do seu cartão SD pelo o da [versão mais recente do Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Se o seu dispositivo estava em uma versão entre 3.0.0 e 4.5.0 antes de atualizar, apague `native.firm` e `cetk` da pasta `/luma/` no seu cartão SD
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Seção III - Iniciando o FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Se encontrares algum erro, muda as configurações da DNS para "automático"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Dacă aceasta vă da o eroare, setați DNS-ul pe "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ title: "Завершение установки"
|
|||
+ При появлении ошибки, поставьте в настройках подключения, в настройках DNS "Получать DNS автоматически" в положение "Да"
|
||||
+ Если вы все еще получаете ошибку и версия вашего NAND ниже 9.2.0, [выполните 9.2.0 CTRTransfer](9.2.0-ctrtransfer) и попробуйте обновиться еще раз
|
||||
1. Если ваше устройство использовало прошивку версии ниже 9.0.0 до обновления, замените `boot.firm` в корне SD-карты на файл из [свежей версии Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Если ваше устройство использовало прошивку версии от 3.0.0 до 4.5.0 до обновления, удалите `native.firm` и `cetk` из папки `/luma/` на SD-карте
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Часть III - Запуск FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Bu bir hata verirse, DNS ayarlarınızı "otomatik" olarak belirleyin
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
如果这一步出错，则将DNS设置改为”auto”（自动）
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue