diff --git a/.github/ISSUE_TEMPLATE/console-issue.md b/.github/ISSUE_TEMPLATE/console-issue.md
new file mode 100644
index 0000000000..bd46699877
--- /dev/null
+++ b/.github/ISSUE_TEMPLATE/console-issue.md
@@ -0,0 +1,20 @@
+---
+name: Console Issue
+about: Some issue with your console after/during following the guide?
+---
+
+**System model**
+
+
+
+**Firmware version**
+
+
+
+**Luma3DS Version(If applicable)**
+
+
+
+**Guide Section(If applicable)**
+
+
\ No newline at end of file
diff --git a/.github/ISSUE_TEMPLATE/guide-issue.md b/.github/ISSUE_TEMPLATE/guide-issue.md
new file mode 100644
index 0000000000..e267151ae1
--- /dev/null
+++ b/.github/ISSUE_TEMPLATE/guide-issue.md
@@ -0,0 +1,12 @@
+---
+name: Guide Issue
+about: Did you find some issue with the guide?
+---
+
+**Pages with issue(s)**
+
+
+
+**Description of the issue(s)**
+
+
diff --git a/.github/pull_request_template.md b/.github/pull_request_template.md
new file mode 100644
index 0000000000..c606235a10
--- /dev/null
+++ b/.github/pull_request_template.md
@@ -0,0 +1,3 @@
+**Description**
+
+
diff --git a/_config.yml b/_config.yml
index 0658281abd..5cace1278c 100644
--- a/_config.yml
+++ b/_config.yml
@@ -11,12 +11,12 @@ minimal_mistakes_skin : "nord"
locale : "en-US"
title : "3DS Hacks Guide"
title_separator : "-"
-name : "Plailect"
+name : "Nintendo Homebrew"
description : "Full sighax CFW Guide"
url : "https://3ds.hacks.guide" # the base hostname & protocol for your site e.g. "https://mmistakes.github.io"
enforce_ssl : "3ds.hacks.guide"
baseurl : # the subpath of your site, e.g. "/blog"
-repository : "Plailect/Guide_3DS" # GitHub username/repo-name e.g. "mmistakes/minimal-mistakes"
+repository : "hacks-guide/Guide_3DS" # GitHub username/repo-name e.g. "mmistakes/minimal-mistakes"
teaser : # filename of teaser fallback teaser image placed in /images/, .e.g. "500x300.png"
breadcrumbs : # true, false (default)
words_per_minute : 200
@@ -80,11 +80,11 @@ analytics:
# Site Author
author:
- name : "Plailect"
- avatar : "bio-photo.png"
- bio : "3DS Hacker"
+ name : "Nintendo Homebrew"
+ avatar :
+ bio : "Nintendo Homebrew Community"
location : "Nullsec"
- email : "Plailect@gmail.com"
+ email :
uri :
bitbucket :
codepen :
@@ -92,18 +92,18 @@ author:
flickr :
facebook :
foursquare :
- github : "Plailect"
+ github : "nh-server"
google_plus :
keybase :
instagram :
- lastfm : "Plailect"
+ lastfm :
linkedin :
pinterest :
soundcloud :
stackoverflow : # "123456/username" (the last part of your profile url, e.g. http://stackoverflow.com/users/123456/username)
steam :
tumblr :
- twitter : "Plailect"
+ twitter :
vine :
weibo :
xing :
diff --git a/_data/navigation/ar_SA.yml b/_data/navigation/ar_SA.yml
index 6355ebdf65..3810194078 100644
--- a/_data/navigation/ar_SA.yml
+++ b/_data/navigation/ar_SA.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Navigation
- -
- title: Why Ads?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/ca_ES.yml b/_data/navigation/ca_ES.yml
index c5ccf58b2d..3810194078 100644
--- a/_data/navigation/ca_ES.yml
+++ b/_data/navigation/ca_ES.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Navigation
- -
- title: Per què anuncis?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/cs_CZ.yml b/_data/navigation/cs_CZ.yml
index 6355ebdf65..3810194078 100644
--- a/_data/navigation/cs_CZ.yml
+++ b/_data/navigation/cs_CZ.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Navigation
- -
- title: Why Ads?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/de_DE.yml b/_data/navigation/de_DE.yml
index d6c2f2bcf0..cf8c1b0bfd 100644
--- a/_data/navigation/de_DE.yml
+++ b/_data/navigation/de_DE.yml
@@ -40,14 +40,12 @@ bottom:
-
title: Für Support auf Englisch, bitte um Hilfe auf dem Nintendo Homebrew Discord.
-
- title: Wenn du diese Anleitung hilfreich fandest, ich akzeptiere Spenden.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Quellcode
-
title: Seitennavigation
- -
- title: Warum Werbung?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/el_GR.yml b/_data/navigation/el_GR.yml
index 01bab4da16..79475c87d8 100644
--- a/_data/navigation/el_GR.yml
+++ b/_data/navigation/el_GR.yml
@@ -40,16 +40,14 @@ bottom:
-
title: Για υποστήριξη στα αγγλικά, ζητήστε βοήθεια στο Nintendo Homebrew on Discord.
-
- title: Εάν σας βοήθησε αυτός ο οδηγός, μπορείτε να κάνετε μια Δωρεά.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Κώδικας
-
title: Πλοήγηση Iστοτόπου
-
- title: Γιατί βλέπω διαφημίσεις;
- -
- title: Πολιτική Απορρήτου
+ title: Privacy Policy
sidebar_title:
-
title: Συνολική πρόοδος
diff --git a/_data/navigation/en_PT.yml b/_data/navigation/en_PT.yml
index 2721e9ba15..2764d00b53 100644
--- a/_data/navigation/en_PT.yml
+++ b/_data/navigation/en_PT.yml
@@ -40,14 +40,12 @@ bottom:
-
title: Fer support in th' English 'o landlubbers, be askin' fer help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Treasure Map
- -
- title: Why Ads?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/en_US.yml b/_data/navigation/en_US.yml
index c4219f75ef..1d2231ea3b 100644
--- a/_data/navigation/en_US.yml
+++ b/_data/navigation/en_US.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Navigation
- -
- title: Why Ads?
-
title: Privacy Policy
sidebar_title:
@@ -144,6 +142,12 @@ sidebar_pages:
-
title: Installing boot9strap (HBL-USM)
url: installing-boot9strap-(hbl-usm)
+ -
+ title: Installing boot9strap (safecerthax)
+ url: installing-boot9strap-(safecerthax)
+ -
+ title: Installing boot9strap (SSLoth-Browser)
+ url: installing-boot9strap-(ssloth-browser)
-
title: Finalizing Setup
url: finalizing-setup
diff --git a/_data/navigation/es_ES.yml b/_data/navigation/es_ES.yml
index 4398adf41b..55f526cc43 100644
--- a/_data/navigation/es_ES.yml
+++ b/_data/navigation/es_ES.yml
@@ -40,16 +40,14 @@ bottom:
-
title: Para soporte en inglés, pide ayuda en el Discord de Nintendo Homebrew.
-
- title: Si aprecias esta guía, acepto donaciones.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Código fuente
-
title: Navegación del sitio
-
- title: '¿Por qué anuncios?'
- -
- title: Política de privacidad
+ title: Privacy Policy
sidebar_title:
-
title: Progreso total
diff --git a/_data/navigation/fi_FI.yml b/_data/navigation/fi_FI.yml
index 44b9a01241..93fab7b07d 100644
--- a/_data/navigation/fi_FI.yml
+++ b/_data/navigation/fi_FI.yml
@@ -40,14 +40,12 @@ bottom:
-
title: Englanninkielistä tukea saat Nintendo Homebrew -palvelimelta Discordissa.
-
- title: Jos arvostat tätä opasta, otan vastaan lahjoituksia.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Lähdekoodi
-
title: Sivukartta
- -
- title: Miksi mainokset?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/fr_FR.yml b/_data/navigation/fr_FR.yml
index 6f26f2f1ea..ea5d2d7e7e 100644
--- a/_data/navigation/fr_FR.yml
+++ b/_data/navigation/fr_FR.yml
@@ -40,14 +40,12 @@ bottom:
-
title: Pour un support en Anglais, demander de l'aide sur le Discord Nintendo Homebrew.
-
- title: Si vous appréciez ce guide, j'accepte les Donations.
+ title: Si vous appréciez ce guide, nous acceptons les Dons.
footer:
-
title: Source
-
title: Index du site
- -
- title: Pourquoi des pubs ?
-
title: Politique de confidentialité
sidebar_title:
diff --git a/_data/navigation/he_IL.yml b/_data/navigation/he_IL.yml
index 7f423a62b6..2d7517f115 100644
--- a/_data/navigation/he_IL.yml
+++ b/_data/navigation/he_IL.yml
@@ -40,14 +40,12 @@ bottom:
-
title: לקבלת תמיכה באנגלית, תבקשו עזרה בNintendo Homebrew על Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: מקור
-
title: ניווט האתר
- -
- title: למה יש פרסומות?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/hr_HR.yml b/_data/navigation/hr_HR.yml
index 6355ebdf65..3810194078 100644
--- a/_data/navigation/hr_HR.yml
+++ b/_data/navigation/hr_HR.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Navigation
- -
- title: Why Ads?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/hu_HU.yml b/_data/navigation/hu_HU.yml
index 4b51324cb1..0b741b664c 100644
--- a/_data/navigation/hu_HU.yml
+++ b/_data/navigation/hu_HU.yml
@@ -46,8 +46,6 @@ footer:
title: Forráskód
-
title: Oldaltérkép
- -
- title: Miért vannak hirdetések?
-
title: Adatvédelmi Irányelv
sidebar_title:
diff --git a/_data/navigation/id_ID.yml b/_data/navigation/id_ID.yml
index 6355ebdf65..3810194078 100644
--- a/_data/navigation/id_ID.yml
+++ b/_data/navigation/id_ID.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Navigation
- -
- title: Why Ads?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/it_IT.yml b/_data/navigation/it_IT.yml
index 8eff4ffe37..5120cdc04a 100644
--- a/_data/navigation/it_IT.yml
+++ b/_data/navigation/it_IT.yml
@@ -40,14 +40,12 @@ bottom:
-
title: Se hai bisogno di aiuto, chiedi pure su Nintendo Homebrew su Discord (in inglese).
-
- title: Se hai gradito questa guida, accetto donazioni.
+ title: Se hai gradito questa guida, accettiamo donazioni.
footer:
-
title: Codice Sorgente
-
title: Mappa del sito
- -
- title: Perché c'è la pubblicità?
-
title: Informativa sulla Privacy
sidebar_title:
diff --git a/_data/navigation/ja_JP.yml b/_data/navigation/ja_JP.yml
index 737138421b..7c70b47df1 100644
--- a/_data/navigation/ja_JP.yml
+++ b/_data/navigation/ja_JP.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: ソースコード
-
title: サイトナビ
- -
- title: なぜ広告が必要なの?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/ko_KR.yml b/_data/navigation/ko_KR.yml
index cfb07becd9..0688ecc1a0 100644
--- a/_data/navigation/ko_KR.yml
+++ b/_data/navigation/ko_KR.yml
@@ -40,14 +40,12 @@ bottom:
-
title: 영어로 지원을 요청하고 싶으시면 Nintendo Homebrew on Discord에 도움을 요청해 주세요.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: 소스 코드
-
title: 사이트 탐색
- -
- title: 왜 광고가 있나요?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/ms_MY.yml b/_data/navigation/ms_MY.yml
index 1212a26b1d..fa77bfa5e0 100644
--- a/_data/navigation/ms_MY.yml
+++ b/_data/navigation/ms_MY.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Sumber
-
title: Navigasi Halaman
- -
- title: Kenapa iklan?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/nl_NL.yml b/_data/navigation/nl_NL.yml
index 0d610a81b3..333c958bfe 100644
--- a/_data/navigation/nl_NL.yml
+++ b/_data/navigation/nl_NL.yml
@@ -40,14 +40,12 @@ bottom:
-
title: Voor Engelse support kan je voor hulp vragen in Nintendo Homebrew op Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Broncode
-
title: Site Navigatie
- -
- title: Waarom Advertenties?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/no_NO.yml b/_data/navigation/no_NO.yml
index fdebcc56bc..e099c63b09 100644
--- a/_data/navigation/no_NO.yml
+++ b/_data/navigation/no_NO.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Kilde
-
title: Sidenavigering
- -
- title: Hvorfor annonser?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/pl_PL.yml b/_data/navigation/pl_PL.yml
index 3d0225aaeb..4a892da51e 100644
--- a/_data/navigation/pl_PL.yml
+++ b/_data/navigation/pl_PL.yml
@@ -40,14 +40,12 @@ bottom:
-
title: Aby uzyskać wsparcie w języku angielskim, wejdź na Serwer Nintendo Homebrew na Discordzie.
-
- title: Jeśli cenisz sobie ten poradnik, akceptuję Darowizny.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Źródło
-
title: Nawigacja Po Stronie
- -
- title: Dlaczego Reklamy?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/pt_BR.yml b/_data/navigation/pt_BR.yml
index 9c00299296..fb0a5a106a 100644
--- a/_data/navigation/pt_BR.yml
+++ b/_data/navigation/pt_BR.yml
@@ -40,14 +40,12 @@ bottom:
-
title: Para suporte em Inglês, peça ajuda em Nintendo Homebrew no Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Fonte
-
title: Navegação do Site
- -
- title: Por que anúncios?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/pt_PT.yml b/_data/navigation/pt_PT.yml
index 027b929276..3919627773 100644
--- a/_data/navigation/pt_PT.yml
+++ b/_data/navigation/pt_PT.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Código-fonte
-
title: Navegação do Site
- -
- title: Porquê anúncios?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/ro_RO.yml b/_data/navigation/ro_RO.yml
index d01baf195e..0fb1c66cd2 100644
--- a/_data/navigation/ro_RO.yml
+++ b/_data/navigation/ro_RO.yml
@@ -40,16 +40,14 @@ bottom:
-
title: Pentru suport în engleză, cereți ajutor la Nintendo Homebrew pe Discord.
-
- title: Dacă apreciați acest ghid, accept Donații.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Codul sursă
-
title: Navigarea pe site
-
- title: De ce sunt reclame?
- -
- title: Politica de confidenţialitate
+ title: Privacy Policy
sidebar_title:
-
title: Progres total
diff --git a/_data/navigation/ru_RU.yml b/_data/navigation/ru_RU.yml
index 26c570f2ca..93314fc65d 100644
--- a/_data/navigation/ru_RU.yml
+++ b/_data/navigation/ru_RU.yml
@@ -40,16 +40,14 @@ bottom:
-
title: Для поддержки на английском языке обратитесь за помощью сюда Nintendo Homebrew on Discord.
-
- title: Если вам помогло или просто понравилось это руководство, то я принимаю пожертвования.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Исходный код
-
title: Навигация по сайту
-
- title: Зачем реклама?
- -
- title: Политика конфиденциальности
+ title: Privacy Policy
sidebar_title:
-
title: Общий прогресс
diff --git a/_data/navigation/sv_SE.yml b/_data/navigation/sv_SE.yml
index 37b5790169..3c95ab278e 100644
--- a/_data/navigation/sv_SE.yml
+++ b/_data/navigation/sv_SE.yml
@@ -40,14 +40,12 @@ bottom:
-
title: För support på engelska, be om hjälp av Nintendo Homebrew på Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Källa
-
title: Navigering på webbplatsen
- -
- title: Varför annonser?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/th_TH.yml b/_data/navigation/th_TH.yml
index 6355ebdf65..3810194078 100644
--- a/_data/navigation/th_TH.yml
+++ b/_data/navigation/th_TH.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Navigation
- -
- title: Why Ads?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/tr_TR.yml b/_data/navigation/tr_TR.yml
index 42159c4042..e07bfbae08 100644
--- a/_data/navigation/tr_TR.yml
+++ b/_data/navigation/tr_TR.yml
@@ -40,14 +40,12 @@ bottom:
-
title: İngilizce destek için Nintendo Homebrew üzerinde , yardım isteyin.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Kaynak
-
title: Site Kılavuzu
- -
- title: Neden Reklam Var?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/uk_UA.yml b/_data/navigation/uk_UA.yml
index 6355ebdf65..3810194078 100644
--- a/_data/navigation/uk_UA.yml
+++ b/_data/navigation/uk_UA.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Source
-
title: Site Navigation
- -
- title: Why Ads?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/vi_VN.yml b/_data/navigation/vi_VN.yml
index 8bd4c9478d..082fc07fee 100644
--- a/_data/navigation/vi_VN.yml
+++ b/_data/navigation/vi_VN.yml
@@ -40,14 +40,12 @@ bottom:
-
title: For support in English, ask for help at Nintendo Homebrew on Discord.
-
- title: If you appreciate this guide, I accept Donations.
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: Nguồn
-
title: Site Navigation
- -
- title: Tại sao có quảng cáo?
-
title: Privacy Policy
sidebar_title:
diff --git a/_data/navigation/zh_CN.yml b/_data/navigation/zh_CN.yml
index 8f712e471d..d5dfd50a83 100644
--- a/_data/navigation/zh_CN.yml
+++ b/_data/navigation/zh_CN.yml
@@ -40,14 +40,12 @@ bottom:
-
title: "如果有疑问并且懂英语的话,可以到Nintendo Homebrew Discord服务器上使用英文寻求帮助。(请注意,如果你身处中国大陆,你可能需要通过科学上网来访问Discord)\n你也可以到译者的QQ群寻求帮助,群号为942052497。"
-
- title: 如果你喜欢这个教程,可以通过捐款支持我。
+ title: 如果你喜欢这个教程,可以通过捐赠支持我们。
footer:
-
title: 本站源码
-
title: 网站导航
- -
- title: 为什么有广告?
-
title: 隐私政策
sidebar_title:
diff --git a/_data/navigation/zh_TW.yml b/_data/navigation/zh_TW.yml
index 48316719ec..a4b37a7d46 100644
--- a/_data/navigation/zh_TW.yml
+++ b/_data/navigation/zh_TW.yml
@@ -40,16 +40,14 @@ bottom:
-
title: 若需英語支援,請於 Discord 上的 Nintendo Homebrew 伺服器發問。
-
- title: 如果您喜歡本教學,我很樂意接受捐贈。
+ title: If you appreciate this guide, we accept Donations.
footer:
-
title: 本站原始碼
-
title: 網站導覽
-
- title: 為什麼會有廣告?
- -
- title: 隱私權政策
+ title: Privacy Policy
sidebar_title:
-
title: 整體進度
diff --git a/_includes/footer.html b/_includes/footer.html
index 972cd6333e..e5658cce42 100644
--- a/_includes/footer.html
+++ b/_includes/footer.html
@@ -2,4 +2,4 @@
{% assign split_path = page.path | split: "/" %}
{% assign locale = split_path[1] %}
{% assign titles = site.data.navigation[locale].footer %}
-
+
diff --git a/_pages/ar_SA/a9lh-to-b9s.txt b/_pages/ar_SA/a9lh-to-b9s.txt
index d2e59ef26a..5690806fa9 100644
--- a/_pages/ar_SA/a9lh-to-b9s.txt
+++ b/_pages/ar_SA/a9lh-to-b9s.txt
@@ -14,9 +14,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/).
-If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
-{: .notice--warning}
-
{% capture notice-1 %}
While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
@@ -40,11 +37,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
{: .notice--info}
* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### Instructions
@@ -55,8 +51,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Insert your SD card into your computer
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card
1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card
1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
diff --git a/_pages/ar_SA/bannerbomb3.txt b/_pages/ar_SA/bannerbomb3.txt
index 590a26735e..efc7f4e064 100644
--- a/_pages/ar_SA/bannerbomb3.txt
+++ b/_pages/ar_SA/bannerbomb3.txt
@@ -4,6 +4,9 @@ title: "BannerBomb3"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
diff --git a/_pages/ar_SA/credits.txt b/_pages/ar_SA/credits.txt
index e66f591db9..c30986407b 100644
--- a/_pages/ar_SA/credits.txt
+++ b/_pages/ar_SA/credits.txt
@@ -2,6 +2,9 @@
title: "Credits"
---
+**Special thanks to Plailect, the original creator and maintainer of the guide!**
+{: .notice--primary}
+
**Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!**
{: .notice--primary}
@@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name.
+ Cartman123
+ Cell9
+ coder65535
- + Cruel`
+ + Cruel
+ d0k3
+ dank101
+ Dazzozo
@@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name.
+ erman1337
+ felipejfc
+ figgyc
+ + fox8091
+ Frozen_Chen
+ Gelex
+ Hamcha
@@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name.
+ jkcgs
+ kartik
+ LordBass
- + MassExplosion123
+ mid-kid
+ MrNbaYoh
+ Mrrraou
+ Night_Fallen_Wolf
+ Normmatt
+ + Plailect
+ plutooo
+ Psi-Hate
+ RandallHoffman
diff --git a/_pages/ar_SA/dsidumper.txt b/_pages/ar_SA/dsidumper.txt
index 034e18f5cc..9762798a6c 100644
--- a/_pages/ar_SA/dsidumper.txt
+++ b/_pages/ar_SA/dsidumper.txt
@@ -2,36 +2,5 @@
title: "DSiDumper"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-To dump system DSiWare, we use an existing homebrew launcher exploit.
-
-If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing
-
-### What You Need
-
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases)
-
-#### Section I - Prep Work
-
-1. Power off your device
-1. Insert your SD card into your computer
-1. Copy your `movable.sed` file to the root of your SD card
-1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card
-1. Reinsert your SD card into your device
-1. Power on your device
-
-#### Section II - DSiWare Dumping
-
-1. Open the Homebrew Launcher using any method
-1. Launch DSiWare Dumper from the list of homebrew
- + This will dump a DSiWare application to SD root
- + It is normal to see several failures.
-1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide
-
-Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
-{: .notice--primary}
-
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
+{: .notice--warning}
diff --git a/_pages/ar_SA/finalizing-setup.txt b/_pages/ar_SA/finalizing-setup.txt
index 90f49a797f..2263b67b8b 100644
--- a/_pages/ar_SA/finalizing-setup.txt
+++ b/_pages/ar_SA/finalizing-setup.txt
@@ -8,7 +8,7 @@ title: "Finalizing Setup"
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
+In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
During this process, we also setup programs such as the following:
@@ -27,7 +27,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
-* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
+* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)*
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
@@ -177,7 +177,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the
{% capture notice-6 %}
If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card.
-If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac.
+If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ar_SA/formatting-sd-(linux).txt b/_pages/ar_SA/formatting-sd-(linux).txt
new file mode 100644
index 0000000000..62d686163c
--- /dev/null
+++ b/_pages/ar_SA/formatting-sd-(linux).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Linux)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(Windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Instructions
+#### Section I - Determining which slot your SD card is in
+
+1. Make sure your SD card is **not** inserted
+1. Launch the Linux Terminal
+1. Type `watch "lsblk"`
+1. Insert your SD card into your PC
+1. Observe the output. It should match something like this:
+```
+NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+mmcblk0 179:0 0 3,8G 0 disk
+└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
+```
+1. Take note of the device mount point. In our example above, it was `mmcblk0`
+ + If `RO` is set to 1, make sure the lock switch is not slid down
+1. Hit CTRL + C to exit the menu
+
+#### Section II - Formatting the card
+
+![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png)
+
+1. Type in `sudo cfdisk /dev/(device mount point from above)`
+1. On each partition, hit `Delete`
+1. Create a new Primary partition that covers the size of your entire SD card
+ + This will create a new partition with the linux filetype
+1. Select type and take a look at the menu
+1. Find "W95 FAT32" and take note of the code on the left side of that text
+1. Press any key, then enter the code you took note of in the previous step
+1. Hit enter, then hit Quit
diff --git a/_pages/ar_SA/formatting-sd-(mac).txt b/_pages/ar_SA/formatting-sd-(mac).txt
new file mode 100644
index 0000000000..c9c0ebf791
--- /dev/null
+++ b/_pages/ar_SA/formatting-sd-(mac).txt
@@ -0,0 +1,60 @@
+---
+title: "Formatting SD (Mac)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages.
+
+### Instructions
+
+#### OS X El Capitan (10.11) and later
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. In the top-left "View" menu, choose "Show All Devices"
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Erase" at the top
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Ensure that "Scheme" is set to "Master Boot Record"
+ + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
+1. Click "Erase"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+#### OS X Yosemite (10.10) and earlier
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Partition" at the top
+ + If "Partition" does not appear, make sure to choose the device instead of a volume
+1. Ensure that "Partition Layout" is set to "1 Partition"
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Click "Options" below the partition table
+1. Choose "Master Boot Record"
+1. Click "OK"
+1. Click "Apply"
+1. Click "Partition"
+1. Wait for the format to finish
+1. Close Disk Utility
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
diff --git a/_pages/ar_SA/formatting-sd-(windows).txt b/_pages/ar_SA/formatting-sd-(windows).txt
new file mode 100644
index 0000000000..fb92106ee4
--- /dev/null
+++ b/_pages/ar_SA/formatting-sd-(windows).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Windows)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### What You Need
+
+* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)
+
+### Instructions
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run `guiformat.exe`
+1. Select your SD card's drive letter for "Drive"
+
+ Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Select a size for "Allocation unit size"
+ + If the SD card is 64GB or below, choose 32768
+ * If the SD card is above 64GB, choose 65536
+1. Enter anything for "Volume label"
+1. Ensure that "Quick Format" is selected
+1. Click "Start"
+1. Click "OK"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+### Common Errors
+
+* Failed to open device: GetLastError()=32
+ + Close everything that may be using the SD card, such as any File Explorer windows.
diff --git a/_pages/ar_SA/get-started.txt b/_pages/ar_SA/get-started.txt
index 43812c5ebb..00833936df 100644
--- a/_pages/ar_SA/get-started.txt
+++ b/_pages/ar_SA/get-started.txt
@@ -6,7 +6,7 @@ title: "Get Started"
### Required Reading
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive.
Your device version can be found at the bottom right of the top screen of the System Settings.
@@ -60,19 +60,10 @@ We believe SpotPass and StreetPass are also safe for use at this time.
1.0.0 |
- 2.0.0 |
- Update to latest version or use an "All Versions" Method |
-
-
- 2.1.0 |
- 8.1.0 |
+ 11.3.0 |
Installing boot9strap (Soundhax) |
-
- 9.0.0 |
- 11.3.0 |
- Homebrew Launcher (Soundhax) |
-
+
11.4.0 |
11.13.0 |
Update to latest version or use an "All Versions" Method |
diff --git a/_pages/ar_SA/home.txt b/_pages/ar_SA/home.txt
index 11c0abea21..de0e6196bf 100644
--- a/_pages/ar_SA/home.txt
+++ b/_pages/ar_SA/home.txt
@@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
+ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup).
-+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.14.0 or below.
++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0).
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
-+ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). If your SD card is 64GB or larger, use an Allocation Unit Size of 64K (65536) instead.
++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/ar_SA/homebrew-launcher-(pichaxx).txt b/_pages/ar_SA/homebrew-launcher-(pichaxx).txt
index 5201af49bb..3e7eea3021 100644
--- a/_pages/ar_SA/homebrew-launcher-(pichaxx).txt
+++ b/_pages/ar_SA/homebrew-launcher-(pichaxx).txt
@@ -4,6 +4,9 @@ title: "Homebrew Launcher (PicHaxx)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
@@ -37,16 +40,17 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
1. Select your `movable.sed` file
1. Select "Build and Download"
1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
-1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card
+ Overwrite the old save file when prompted
1. Reinsert your SD card into your device
1. Power on your device
1. Launch "Pokemon Picross"
1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
+ + You may see an error stating there are no applications found
+1. Power off your device
___
diff --git a/_pages/ar_SA/homebrew-launcher-(soundhax).txt b/_pages/ar_SA/homebrew-launcher-(soundhax).txt
index 8667e8c287..04d8152155 100644
--- a/_pages/ar_SA/homebrew-launcher-(soundhax).txt
+++ b/_pages/ar_SA/homebrew-launcher-(soundhax).txt
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)*
### Instructions
diff --git a/_pages/ar_SA/homebrew-launcher-(steelhax).txt b/_pages/ar_SA/homebrew-launcher-(steelhax).txt
index 681be6021f..65ec1b9a69 100644
--- a/_pages/ar_SA/homebrew-launcher-(steelhax).txt
+++ b/_pages/ar_SA/homebrew-launcher-(steelhax).txt
@@ -2,62 +2,5 @@
title: "Homebrew Launcher (Steelhax)"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop.
-
-If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)).
-{: .notice--success}
-
-If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
{: .notice--warning}
-
-### What You Need
-
-* The free eShop game "Steel Diver: Sub Wars"
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip)
-* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)*
-
-### Instructions
-
-#### Section I - Prep Work
-
-1. Create a folder named `3ds` on the root of your SD card if it does not already exist
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card
-1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin`
-
-#### Section II - Steelminer
-
-1. Insert your SD card into your device
-1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
- + Decline the game update when prompted
- + If you have already updated the game, use the Data Management menu of the System Settings to delete the update
-1. Exit "Steel Diver: Sub Wars"
-1. Power off your device
-1. Insert your SD card into your computer
-1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer
-1. Select your `movable.sed` file
-1. Select "Start!"
-1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card
- + **EUR Region**: `000d7e00`
- + **JPN Region**: `000d7c00`
- + **USA Region**: `000d7d00`
-1. Copy the new downloaded save file to the `data` folder on your SD card
- + Overwrite the old save file when prompted
-1. Reinsert your SD card into your device
-1. Power on your device
-1. Launch "Steel Diver: Sub Wars"
-1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
-
-___
-
-### Continue to [DSiWare Dumper](dsidumper)
-{: .notice--primary}
diff --git a/_pages/ar_SA/installing-boot9strap-(fredtool).txt b/_pages/ar_SA/installing-boot9strap-(fredtool).txt
index 46eedbe264..050739074c 100644
--- a/_pages/ar_SA/installing-boot9strap-(fredtool).txt
+++ b/_pages/ar_SA/installing-boot9strap-(fredtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
@@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte
### What You Need
-* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper))
+* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3))
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
@@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte
#### Section II - Fredtool
-1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer
+1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer
1. Select your `movable.sed` file for the "Your movable.sed" field
1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field
1. Complete the "I'm not a robot" captcha
1. Select "Start"
1. Wait for the process to complete
1. When the process has completed, download your modified DSiWare archive from the site
- + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited)
+ + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited)
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + This `` folder will be another 32 letter/number folder inside the `` folder
- + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If the `Nintendo DSiWare` folder does not exist, create it inside of the ``
1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device
1. Power on your device
@@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Power off your device
1. Insert your SD card into your computer
-1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card
+1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/ar_SA/installing-boot9strap-(frogtool).txt b/_pages/ar_SA/installing-boot9strap-(frogtool).txt
index 01691c1a1d..b5434287fa 100644
--- a/_pages/ar_SA/installing-boot9strap-(frogtool).txt
+++ b/_pages/ar_SA/installing-boot9strap-(frogtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.
@@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce)
* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
1. Insert your SD card into your computer
1. Copy your `movable.sed` file to the root of your SD card
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
1. Copy `frogcert.bin` to the root of your SD card
1. Reinsert your SD card into your device
@@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (Start) to save and reboot
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+#### Section V - Restoring DS Download Play
+
+1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+
___
### Continue to [Finalizing Setup](finalizing-setup)
diff --git a/_pages/ar_SA/installing-boot9strap-(hardmod).txt b/_pages/ar_SA/installing-boot9strap-(hardmod).txt
index 7ff5108da8..1e03aa7cf1 100644
--- a/_pages/ar_SA/installing-boot9strap-(hardmod).txt
+++ b/_pages/ar_SA/installing-boot9strap-(hardmod).txt
@@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS |
diff --git a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
index cde9885cfe..7004e6aff7 100644
--- a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
@@ -14,7 +14,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/ar_SA/installing-boot9strap-(soundhax).txt b/_pages/ar_SA/installing-boot9strap-(soundhax).txt
index 1ca04197d7..29c5140ec9 100644
--- a/_pages/ar_SA/installing-boot9strap-(soundhax).txt
+++ b/_pages/ar_SA/installing-boot9strap-(soundhax).txt
@@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)"
### Required Reading
-Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions.
-
-{% capture notice-1 %}
-
-Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions.
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
### Instructions
@@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint
1. Power off your device
1. Insert your SD card into your computer
1. Copy the Soundhax `.m4a` to the root of your SD card
-1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin`
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.3dsx` to the root of your SD card
+1. Copy `otherapp.bin` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
-1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Reinsert your SD card into your device
1. Power on your device
@@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint
+ In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
- + If it freezes, just force the console to power off by holding the power button, then try again
+ + If it freezes, force the console to power off by holding the power button, then try again
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ar_SA/installing-boot9strap-(usm).txt b/_pages/ar_SA/installing-boot9strap-(usm).txt
index 929aef5fad..d4f92965ff 100644
--- a/_pages/ar_SA/installing-boot9strap-(usm).txt
+++ b/_pages/ar_SA/installing-boot9strap-(usm).txt
@@ -17,31 +17,32 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--danger}
+{: .notice--warning}
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release archive for [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
+1. If your device is powered on, power off your device
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
- + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
-1. If your console is powered on, power off your console
+ + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + If `Nintendo DSiWare` does not exist, create it
+1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If `Nintendo DSiWare` does not exist, create it inside of the ``
1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC
+ This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups
-1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder
+1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder
#### Section II - BannerBomb3
@@ -56,15 +57,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section III - unSAFE_MODE
-1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
- + Keep holding the buttons until the console boots into Safe Mode
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the device boots into Safe Mode
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
- + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+ + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
#### Section IV - Configuring Luma3DS
@@ -81,12 +82,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
1. Navigate to `Data Management` -> `DSiWare`
1. Click on the SD Card section
+ Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
-1. Power your system off
+1. Power off your device
1. Insert your SD card into your computer
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
-1. Continue to Finalizing Setup
___
diff --git a/_pages/ar_SA/legacy-methods.txt b/_pages/ar_SA/legacy-methods.txt
index 987a3ccfc9..b9da394c9c 100644
--- a/_pages/ar_SA/legacy-methods.txt
+++ b/_pages/ar_SA/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
+For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/ar_SA/region-changing.txt b/_pages/ar_SA/region-changing.txt
index 75af6091cf..595af43745 100644
--- a/_pages/ar_SA/region-changing.txt
+++ b/_pages/ar_SA/region-changing.txt
@@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
-After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
+After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue.
{: .notice--warning}
Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
@@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this.
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Reinsert your SD card into your device
-#### Section II - CTRTransfer
-
+#### Section II - NAND Backup
1. Launch GodMode9 by holding (Start) during boot
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
+ Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
+1. Press (Home) to bring up the action menu
+1. Select "Scripts..."
+1. Select "GM9Megascript"
+1. Select "Backup Options"
+1. Select "SysNAND Backup"
+1. Press (A) to confirm
+ + This process will take some time
+ + If you get an error, make sure that you have at least 1.3GB of free space on your SD card
+1. Press (A) to continue
+1. Press (B) to return to the main menu
+1. Select "Exit"
+1. Press (A) to relock write permissions if prompted
+1. Hold (R) and press (B) at the same time to eject your SD card
+1. Insert your SD card into your computer
+1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Make backups in multiple locations (such as online file storage)
+ + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
+1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+1. Reinsert your SD card into your device
+ + If your SD card was not detected, hold (R) and press (B) at the same time to remount it
+
+#### Section III - CTRTransfer
+
1. Navigate to `[0:] SDCARD` -> `gm9`
1. Press (A) on the CTRTransfer `.bin` to select it
1. Select "CTRNAND options..."
@@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
+ Updates while using B9S + Luma (what you have) are safe
+ If this gives you an error, set your DNS settings to "auto"
-#### Section III - Launching FBI
+#### Section IV - Launching FBI
1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})
1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu
@@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
1. Launch the Download Play application
1. Your device should load the Homebrew Launcher
-#### Section IV - Reinstalling Tickets
+#### Section V - Reinstalling Tickets
If script found no user tickets told you to skip this section, then skip this section
{: .notice--info}
@@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se
+ Press (B) to decline installing tickets from CDN.
1. Press (Home) to exit FBI
-#### Section V - Region settings
+#### Section VI - Region settings
1. Launch the System Settings
1. Go to "Other Settings", "Profile", then "Region Settings"
1. Select a country from the region you switched to
1. If prompted, you do not need to set a state
-#### Section VI - Remove CTRTransfer image
+#### Section VII - Remove CTRTransfer image
1. Launch GodMode9 by holding (Start) during boot
1. Navigate to `[0:] SDCARD` -> `gm9`
diff --git a/_pages/ar_SA/seedminer.txt b/_pages/ar_SA/seedminer.txt
index ff9a1fb4c3..7e0d97c6d2 100644
--- a/_pages/ar_SA/seedminer.txt
+++ b/_pages/ar_SA/seedminer.txt
@@ -35,7 +35,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
+ This folder name is also known as your "ID0"
1. Power on your device
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
+ + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
#### Section II - Seedminer
@@ -48,14 +48,14 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
1. Select "Go"
- + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section.
+ + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section
1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console
1. Wait for the site to update
+ If it does not, wait a few minutes before refreshing the page once
1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button
1. Wait for the remainder of the process to complete
- + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour.
- + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue.
+ + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour
+ + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
+ If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. When the process has completed, download your `movable.sed` file from the site
+ Keep this file as you will need it in the upcoming pages
@@ -66,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions except CHN and TWN.
+This method is compatible with all regions except CHN and TWN, and requires working shoulder buttons.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/ar_SA/site-navigation.txt b/_pages/ar_SA/site-navigation.txt
index 9f7a473f8a..dca1e3bba0 100644
--- a/_pages/ar_SA/site-navigation.txt
+++ b/_pages/ar_SA/site-navigation.txt
@@ -8,7 +8,7 @@ sitemap: false
**Popular**
+ [Finalizing Setup](finalizing-setup)
-+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,7 +21,6 @@ sitemap: false
+ [Cartridge Update](cart-update)
+ [Credits](credits)
+ [CTRTransfer](ctrtransfer)
-+ [DSiWare Dumper](dsidumper)
+ [Donations](donations)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -32,6 +31,9 @@ sitemap: false
+ [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system))
+ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi))
+ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds))
++ [Formatting SD (Linux)](formatting-sd-(linux))
++ [Formatting SD (Mac)](formatting-sd-(mac))
++ [Formatting SD (Windows)](formatting-sd-(windows))
+ [Get Started](get-started)
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
@@ -39,23 +41,22 @@ sitemap: false
+ [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives))
+ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx))
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax))
+ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa))
+ [Installing boot9strap (Browser)](installing-boot9strap-(browser))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
-+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
++ [Installing boot9strap (USM)](installing-boot9strap-(usm))
++ [Legacy Methods](legacy-methods)
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
+ [Seedminer](seedminer)
-+ [Legacy Seedminer Methods](legacy-methods)
+ [Troubleshooting](troubleshooting)
+ [Uninstall CFW](uninstall-cfw)
+ [Updating B9S](updating-b9s)
diff --git a/_pages/ar_SA/updating-b9s.txt b/_pages/ar_SA/updating-b9s.txt
index f4c4a38875..f5c1a5412f 100644
--- a/_pages/ar_SA/updating-b9s.txt
+++ b/_pages/ar_SA/updating-b9s.txt
@@ -26,8 +26,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
@@ -37,7 +36,6 @@ For all steps in this section, overwrite any existing files on your SD card.
{: .notice--info}
1. Insert your SD card into your computer
-1. Copy `boot.3dsx` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
@@ -56,7 +54,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Insert your SD card into your computer
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/ca_ES/a9lh-to-b9s.txt b/_pages/ca_ES/a9lh-to-b9s.txt
index 194aa0aa8c..5991c37bcc 100644
--- a/_pages/ca_ES/a9lh-to-b9s.txt
+++ b/_pages/ca_ES/a9lh-to-b9s.txt
@@ -14,9 +14,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/).
-Si teniu un PIN habilitat a Luma3DS, SafeB9SInstaller us alertarà de l'error "OTP Crypto Fail" a menys que deshabiliteu el vostre PIN temporalment (podeu tornar-lo a habilitar després de l'actualització).
-{: .notice--warning}
-
{% capture notice-1 %}
While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
@@ -40,11 +37,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
{: .notice--info}
* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### Instructions
@@ -55,8 +51,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Insert your SD card into your computer
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card
1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card
1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
diff --git a/_pages/ca_ES/bannerbomb3.txt b/_pages/ca_ES/bannerbomb3.txt
index 590a26735e..efc7f4e064 100644
--- a/_pages/ca_ES/bannerbomb3.txt
+++ b/_pages/ca_ES/bannerbomb3.txt
@@ -4,6 +4,9 @@ title: "BannerBomb3"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
diff --git a/_pages/ca_ES/credits.txt b/_pages/ca_ES/credits.txt
index dc25de079d..a2545e477e 100644
--- a/_pages/ca_ES/credits.txt
+++ b/_pages/ca_ES/credits.txt
@@ -2,6 +2,9 @@
title: "Credits"
---
+**Special thanks to Plailect, the original creator and maintainer of the guide!**
+{: .notice--primary}
+
**Un agraïment especial a tots els de [#Cakey a Freenode]
(http://webchat.freenode.net/?channels=%23Cakey) per ser
increïbles!**
@@ -24,7 +27,7 @@ Si t'he oblidat, contacta'm i hi afegiré el teu nom.
+ Cartman123
+ Cell9
+ coder65535
- + Cruel`
+ + Cruel
+ d0k3
+ dank101
+ Dazzozo
@@ -37,6 +40,7 @@ Si t'he oblidat, contacta'm i hi afegiré el teu nom.
+ erman1337
+ felipejfc
+ figgyc
+ + fox8091
+ Frozen_Chen
+ Gelex
+ Hamcha
@@ -48,12 +52,12 @@ Si t'he oblidat, contacta'm i hi afegiré el teu nom.
+ jkcgs
+ kartik
+ LordBass
- + MassExplosion123
+ mid-kid
+ MrNbaYoh
+ Mrrraou
+ Night_Fallen_Wolf
+ Normmatt
+ + Plailect
+ plutooo
+ Psi-Hate
+ RandallHoffman
diff --git a/_pages/ca_ES/dsidumper.txt b/_pages/ca_ES/dsidumper.txt
index 034e18f5cc..9762798a6c 100644
--- a/_pages/ca_ES/dsidumper.txt
+++ b/_pages/ca_ES/dsidumper.txt
@@ -2,36 +2,5 @@
title: "DSiDumper"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-To dump system DSiWare, we use an existing homebrew launcher exploit.
-
-If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing
-
-### What You Need
-
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases)
-
-#### Section I - Prep Work
-
-1. Power off your device
-1. Insert your SD card into your computer
-1. Copy your `movable.sed` file to the root of your SD card
-1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card
-1. Reinsert your SD card into your device
-1. Power on your device
-
-#### Section II - DSiWare Dumping
-
-1. Open the Homebrew Launcher using any method
-1. Launch DSiWare Dumper from the list of homebrew
- + This will dump a DSiWare application to SD root
- + It is normal to see several failures.
-1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide
-
-Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
-{: .notice--primary}
-
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
+{: .notice--warning}
diff --git a/_pages/ca_ES/finalizing-setup.txt b/_pages/ca_ES/finalizing-setup.txt
index 7b921f1338..a515432c74 100644
--- a/_pages/ca_ES/finalizing-setup.txt
+++ b/_pages/ca_ES/finalizing-setup.txt
@@ -8,7 +8,7 @@ title: "Finalizing Setup"
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
+In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
During this process, we also setup programs such as the following:
@@ -27,7 +27,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
-* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
+* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)*
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
@@ -177,7 +177,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the
{% capture notice-6 %}
If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card.
-If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac.
+If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ca_ES/formatting-sd-(linux).txt b/_pages/ca_ES/formatting-sd-(linux).txt
new file mode 100644
index 0000000000..62d686163c
--- /dev/null
+++ b/_pages/ca_ES/formatting-sd-(linux).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Linux)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(Windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Instructions
+#### Section I - Determining which slot your SD card is in
+
+1. Make sure your SD card is **not** inserted
+1. Launch the Linux Terminal
+1. Type `watch "lsblk"`
+1. Insert your SD card into your PC
+1. Observe the output. It should match something like this:
+```
+NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+mmcblk0 179:0 0 3,8G 0 disk
+└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
+```
+1. Take note of the device mount point. In our example above, it was `mmcblk0`
+ + If `RO` is set to 1, make sure the lock switch is not slid down
+1. Hit CTRL + C to exit the menu
+
+#### Section II - Formatting the card
+
+![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png)
+
+1. Type in `sudo cfdisk /dev/(device mount point from above)`
+1. On each partition, hit `Delete`
+1. Create a new Primary partition that covers the size of your entire SD card
+ + This will create a new partition with the linux filetype
+1. Select type and take a look at the menu
+1. Find "W95 FAT32" and take note of the code on the left side of that text
+1. Press any key, then enter the code you took note of in the previous step
+1. Hit enter, then hit Quit
diff --git a/_pages/ca_ES/formatting-sd-(mac).txt b/_pages/ca_ES/formatting-sd-(mac).txt
new file mode 100644
index 0000000000..c9c0ebf791
--- /dev/null
+++ b/_pages/ca_ES/formatting-sd-(mac).txt
@@ -0,0 +1,60 @@
+---
+title: "Formatting SD (Mac)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages.
+
+### Instructions
+
+#### OS X El Capitan (10.11) and later
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. In the top-left "View" menu, choose "Show All Devices"
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Erase" at the top
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Ensure that "Scheme" is set to "Master Boot Record"
+ + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
+1. Click "Erase"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+#### OS X Yosemite (10.10) and earlier
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Partition" at the top
+ + If "Partition" does not appear, make sure to choose the device instead of a volume
+1. Ensure that "Partition Layout" is set to "1 Partition"
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Click "Options" below the partition table
+1. Choose "Master Boot Record"
+1. Click "OK"
+1. Click "Apply"
+1. Click "Partition"
+1. Wait for the format to finish
+1. Close Disk Utility
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
diff --git a/_pages/ca_ES/formatting-sd-(windows).txt b/_pages/ca_ES/formatting-sd-(windows).txt
new file mode 100644
index 0000000000..fb92106ee4
--- /dev/null
+++ b/_pages/ca_ES/formatting-sd-(windows).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Windows)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### What You Need
+
+* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)
+
+### Instructions
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run `guiformat.exe`
+1. Select your SD card's drive letter for "Drive"
+
+ Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Select a size for "Allocation unit size"
+ + If the SD card is 64GB or below, choose 32768
+ * If the SD card is above 64GB, choose 65536
+1. Enter anything for "Volume label"
+1. Ensure that "Quick Format" is selected
+1. Click "Start"
+1. Click "OK"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+### Common Errors
+
+* Failed to open device: GetLastError()=32
+ + Close everything that may be using the SD card, such as any File Explorer windows.
diff --git a/_pages/ca_ES/get-started.txt b/_pages/ca_ES/get-started.txt
index c6d5cda457..c4295cf08d 100644
--- a/_pages/ca_ES/get-started.txt
+++ b/_pages/ca_ES/get-started.txt
@@ -6,7 +6,7 @@ title: "Get Started"
### Required Reading
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive.
Your device version can be found at the bottom right of the top screen of the System Settings.
@@ -60,19 +60,10 @@ We believe SpotPass and StreetPass are also safe for use at this time.
1.0.0 |
- 2.0.0 |
- Update to latest version or use an "All Versions" Method |
-
-
- 2.1.0 |
- 8.1.0 |
+ 11.3.0 |
Installing boot9strap (Soundhax) |
-
- 9.0.0 |
- 11.3.0 |
- Homebrew Launcher (Soundhax) |
-
+
11.4.0 |
11.13.0 |
Update to latest version or use an "All Versions" Method |
diff --git a/_pages/ca_ES/home.txt b/_pages/ca_ES/home.txt
index 11c0abea21..de0e6196bf 100644
--- a/_pages/ca_ES/home.txt
+++ b/_pages/ca_ES/home.txt
@@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
+ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup).
-+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.14.0 or below.
++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0).
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
-+ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). If your SD card is 64GB or larger, use an Allocation Unit Size of 64K (65536) instead.
++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/ca_ES/homebrew-launcher-(pichaxx).txt b/_pages/ca_ES/homebrew-launcher-(pichaxx).txt
index 5201af49bb..3e7eea3021 100644
--- a/_pages/ca_ES/homebrew-launcher-(pichaxx).txt
+++ b/_pages/ca_ES/homebrew-launcher-(pichaxx).txt
@@ -4,6 +4,9 @@ title: "Homebrew Launcher (PicHaxx)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
@@ -37,16 +40,17 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
1. Select your `movable.sed` file
1. Select "Build and Download"
1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
-1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card
+ Overwrite the old save file when prompted
1. Reinsert your SD card into your device
1. Power on your device
1. Launch "Pokemon Picross"
1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
+ + You may see an error stating there are no applications found
+1. Power off your device
___
diff --git a/_pages/ca_ES/homebrew-launcher-(soundhax).txt b/_pages/ca_ES/homebrew-launcher-(soundhax).txt
index 8667e8c287..04d8152155 100644
--- a/_pages/ca_ES/homebrew-launcher-(soundhax).txt
+++ b/_pages/ca_ES/homebrew-launcher-(soundhax).txt
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)*
### Instructions
diff --git a/_pages/ca_ES/homebrew-launcher-(steelhax).txt b/_pages/ca_ES/homebrew-launcher-(steelhax).txt
index 681be6021f..65ec1b9a69 100644
--- a/_pages/ca_ES/homebrew-launcher-(steelhax).txt
+++ b/_pages/ca_ES/homebrew-launcher-(steelhax).txt
@@ -2,62 +2,5 @@
title: "Homebrew Launcher (Steelhax)"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop.
-
-If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)).
-{: .notice--success}
-
-If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
{: .notice--warning}
-
-### What You Need
-
-* The free eShop game "Steel Diver: Sub Wars"
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip)
-* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)*
-
-### Instructions
-
-#### Section I - Prep Work
-
-1. Create a folder named `3ds` on the root of your SD card if it does not already exist
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card
-1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin`
-
-#### Section II - Steelminer
-
-1. Insert your SD card into your device
-1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
- + Decline the game update when prompted
- + If you have already updated the game, use the Data Management menu of the System Settings to delete the update
-1. Exit "Steel Diver: Sub Wars"
-1. Power off your device
-1. Insert your SD card into your computer
-1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer
-1. Select your `movable.sed` file
-1. Select "Start!"
-1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card
- + **EUR Region**: `000d7e00`
- + **JPN Region**: `000d7c00`
- + **USA Region**: `000d7d00`
-1. Copy the new downloaded save file to the `data` folder on your SD card
- + Overwrite the old save file when prompted
-1. Reinsert your SD card into your device
-1. Power on your device
-1. Launch "Steel Diver: Sub Wars"
-1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
-
-___
-
-### Continue to [DSiWare Dumper](dsidumper)
-{: .notice--primary}
diff --git a/_pages/ca_ES/installing-boot9strap-(fredtool).txt b/_pages/ca_ES/installing-boot9strap-(fredtool).txt
index 46eedbe264..050739074c 100644
--- a/_pages/ca_ES/installing-boot9strap-(fredtool).txt
+++ b/_pages/ca_ES/installing-boot9strap-(fredtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
@@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte
### What You Need
-* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper))
+* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3))
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
@@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte
#### Section II - Fredtool
-1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer
+1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer
1. Select your `movable.sed` file for the "Your movable.sed" field
1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field
1. Complete the "I'm not a robot" captcha
1. Select "Start"
1. Wait for the process to complete
1. When the process has completed, download your modified DSiWare archive from the site
- + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited)
+ + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited)
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + This `` folder will be another 32 letter/number folder inside the `` folder
- + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If the `Nintendo DSiWare` folder does not exist, create it inside of the ``
1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device
1. Power on your device
@@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Power off your device
1. Insert your SD card into your computer
-1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card
+1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/ca_ES/installing-boot9strap-(frogtool).txt b/_pages/ca_ES/installing-boot9strap-(frogtool).txt
index 01691c1a1d..b5434287fa 100644
--- a/_pages/ca_ES/installing-boot9strap-(frogtool).txt
+++ b/_pages/ca_ES/installing-boot9strap-(frogtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.
@@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce)
* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
1. Insert your SD card into your computer
1. Copy your `movable.sed` file to the root of your SD card
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
1. Copy `frogcert.bin` to the root of your SD card
1. Reinsert your SD card into your device
@@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (Start) to save and reboot
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+#### Section V - Restoring DS Download Play
+
+1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+
___
### Continue to [Finalizing Setup](finalizing-setup)
diff --git a/_pages/ca_ES/installing-boot9strap-(hardmod).txt b/_pages/ca_ES/installing-boot9strap-(hardmod).txt
index 7ff5108da8..1e03aa7cf1 100644
--- a/_pages/ca_ES/installing-boot9strap-(hardmod).txt
+++ b/_pages/ca_ES/installing-boot9strap-(hardmod).txt
@@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS |
diff --git a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
index cde9885cfe..7004e6aff7 100644
--- a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
@@ -14,7 +14,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/ca_ES/installing-boot9strap-(soundhax).txt b/_pages/ca_ES/installing-boot9strap-(soundhax).txt
index 1ca04197d7..29c5140ec9 100644
--- a/_pages/ca_ES/installing-boot9strap-(soundhax).txt
+++ b/_pages/ca_ES/installing-boot9strap-(soundhax).txt
@@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)"
### Required Reading
-Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions.
-
-{% capture notice-1 %}
-
-Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions.
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
### Instructions
@@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint
1. Power off your device
1. Insert your SD card into your computer
1. Copy the Soundhax `.m4a` to the root of your SD card
-1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin`
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.3dsx` to the root of your SD card
+1. Copy `otherapp.bin` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
-1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Reinsert your SD card into your device
1. Power on your device
@@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint
+ In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
- + If it freezes, just force the console to power off by holding the power button, then try again
+ + If it freezes, force the console to power off by holding the power button, then try again
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ca_ES/installing-boot9strap-(usm).txt b/_pages/ca_ES/installing-boot9strap-(usm).txt
index 929aef5fad..d4f92965ff 100644
--- a/_pages/ca_ES/installing-boot9strap-(usm).txt
+++ b/_pages/ca_ES/installing-boot9strap-(usm).txt
@@ -17,31 +17,32 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--danger}
+{: .notice--warning}
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release archive for [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
+1. If your device is powered on, power off your device
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
- + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
-1. If your console is powered on, power off your console
+ + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + If `Nintendo DSiWare` does not exist, create it
+1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If `Nintendo DSiWare` does not exist, create it inside of the ``
1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC
+ This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups
-1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder
+1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder
#### Section II - BannerBomb3
@@ -56,15 +57,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section III - unSAFE_MODE
-1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
- + Keep holding the buttons until the console boots into Safe Mode
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the device boots into Safe Mode
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
- + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+ + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
#### Section IV - Configuring Luma3DS
@@ -81,12 +82,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
1. Navigate to `Data Management` -> `DSiWare`
1. Click on the SD Card section
+ Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
-1. Power your system off
+1. Power off your device
1. Insert your SD card into your computer
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
-1. Continue to Finalizing Setup
___
diff --git a/_pages/ca_ES/legacy-methods.txt b/_pages/ca_ES/legacy-methods.txt
index 987a3ccfc9..b9da394c9c 100644
--- a/_pages/ca_ES/legacy-methods.txt
+++ b/_pages/ca_ES/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
+For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/ca_ES/region-changing.txt b/_pages/ca_ES/region-changing.txt
index 23ac8eccfe..4d45e236c6 100644
--- a/_pages/ca_ES/region-changing.txt
+++ b/_pages/ca_ES/region-changing.txt
@@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
-After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
+After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue.
{: .notice--warning}
Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
@@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this.
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Reinsert your SD card into your device
-#### Section II - CTRTransfer
-
+#### Section II - NAND Backup
1. Launch GodMode9 by holding (Start) during boot
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
+ Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
+1. Press (Home) to bring up the action menu
+1. Select "Scripts..."
+1. Select "GM9Megascript"
+1. Select "Backup Options"
+1. Select "SysNAND Backup"
+1. Premeu (A) per confirmar
+ + This process will take some time
+ + If you get an error, make sure that you have at least 1.3GB of free space on your SD card
+1. Press (A) to continue
+1. Press (B) to return to the main menu
+1. Select "Exit"
+1. Press (A) to relock write permissions if prompted
+1. Hold (R) and press (B) at the same time to eject your SD card
+1. Insert your SD card into your computer
+1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Make backups in multiple locations (such as online file storage)
+ + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
+1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+1. Reinsert your SD card into your device
+ + If your SD card was not detected, hold (R) and press (B) at the same time to remount it
+
+#### Section III - CTRTransfer
+
1. Navigate to `[0:] SDCARD` -> `gm9`
1. Press (A) on the CTRTransfer `.bin` to select it
1. Select "CTRNAND options..."
@@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
+ Updates while using B9S + Luma (what you have) are safe
+ Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
-#### Section III - Launching FBI
+#### Section IV - Launching FBI
1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})
1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu
@@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
1. Launch the Download Play application
1. Your device should load the Homebrew Launcher
-#### Section IV - Reinstalling Tickets
+#### Section V - Reinstalling Tickets
If script found no user tickets told you to skip this section, then skip this section
{: .notice--info}
@@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se
+ Press (B) to decline installing tickets from CDN.
1. Press (Home) to exit FBI
-#### Section V - Region settings
+#### Section VI - Region settings
1. Launch the System Settings
1. Go to "Other Settings", "Profile", then "Region Settings"
1. Select a country from the region you switched to
1. If prompted, you do not need to set a state
-#### Section VI - Remove CTRTransfer image
+#### Section VII - Remove CTRTransfer image
1. Launch GodMode9 by holding (Start) during boot
1. Navigate to `[0:] SDCARD` -> `gm9`
diff --git a/_pages/ca_ES/seedminer.txt b/_pages/ca_ES/seedminer.txt
index ff9a1fb4c3..7e0d97c6d2 100644
--- a/_pages/ca_ES/seedminer.txt
+++ b/_pages/ca_ES/seedminer.txt
@@ -35,7 +35,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
+ This folder name is also known as your "ID0"
1. Power on your device
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
+ + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
#### Section II - Seedminer
@@ -48,14 +48,14 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
1. Select "Go"
- + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section.
+ + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section
1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console
1. Wait for the site to update
+ If it does not, wait a few minutes before refreshing the page once
1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button
1. Wait for the remainder of the process to complete
- + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour.
- + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue.
+ + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour
+ + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
+ If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. When the process has completed, download your `movable.sed` file from the site
+ Keep this file as you will need it in the upcoming pages
@@ -66,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions except CHN and TWN.
+This method is compatible with all regions except CHN and TWN, and requires working shoulder buttons.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/ca_ES/site-navigation.txt b/_pages/ca_ES/site-navigation.txt
index 9f7a473f8a..dca1e3bba0 100644
--- a/_pages/ca_ES/site-navigation.txt
+++ b/_pages/ca_ES/site-navigation.txt
@@ -8,7 +8,7 @@ sitemap: false
**Popular**
+ [Finalizing Setup](finalizing-setup)
-+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,7 +21,6 @@ sitemap: false
+ [Cartridge Update](cart-update)
+ [Credits](credits)
+ [CTRTransfer](ctrtransfer)
-+ [DSiWare Dumper](dsidumper)
+ [Donations](donations)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -32,6 +31,9 @@ sitemap: false
+ [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system))
+ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi))
+ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds))
++ [Formatting SD (Linux)](formatting-sd-(linux))
++ [Formatting SD (Mac)](formatting-sd-(mac))
++ [Formatting SD (Windows)](formatting-sd-(windows))
+ [Get Started](get-started)
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
@@ -39,23 +41,22 @@ sitemap: false
+ [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives))
+ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx))
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax))
+ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa))
+ [Installing boot9strap (Browser)](installing-boot9strap-(browser))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
-+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
++ [Installing boot9strap (USM)](installing-boot9strap-(usm))
++ [Legacy Methods](legacy-methods)
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
+ [Seedminer](seedminer)
-+ [Legacy Seedminer Methods](legacy-methods)
+ [Troubleshooting](troubleshooting)
+ [Uninstall CFW](uninstall-cfw)
+ [Updating B9S](updating-b9s)
diff --git a/_pages/ca_ES/updating-b9s.txt b/_pages/ca_ES/updating-b9s.txt
index f4c4a38875..f5c1a5412f 100644
--- a/_pages/ca_ES/updating-b9s.txt
+++ b/_pages/ca_ES/updating-b9s.txt
@@ -26,8 +26,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
@@ -37,7 +36,6 @@ For all steps in this section, overwrite any existing files on your SD card.
{: .notice--info}
1. Insert your SD card into your computer
-1. Copy `boot.3dsx` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
@@ -56,7 +54,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Insert your SD card into your computer
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/cs_CZ/a9lh-to-b9s.txt b/_pages/cs_CZ/a9lh-to-b9s.txt
index d2e59ef26a..5690806fa9 100644
--- a/_pages/cs_CZ/a9lh-to-b9s.txt
+++ b/_pages/cs_CZ/a9lh-to-b9s.txt
@@ -14,9 +14,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/).
-If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
-{: .notice--warning}
-
{% capture notice-1 %}
While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
@@ -40,11 +37,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
{: .notice--info}
* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### Instructions
@@ -55,8 +51,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Insert your SD card into your computer
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card
1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card
1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
diff --git a/_pages/cs_CZ/bannerbomb3.txt b/_pages/cs_CZ/bannerbomb3.txt
index 590a26735e..efc7f4e064 100644
--- a/_pages/cs_CZ/bannerbomb3.txt
+++ b/_pages/cs_CZ/bannerbomb3.txt
@@ -4,6 +4,9 @@ title: "BannerBomb3"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
diff --git a/_pages/cs_CZ/credits.txt b/_pages/cs_CZ/credits.txt
index e66f591db9..c30986407b 100644
--- a/_pages/cs_CZ/credits.txt
+++ b/_pages/cs_CZ/credits.txt
@@ -2,6 +2,9 @@
title: "Credits"
---
+**Special thanks to Plailect, the original creator and maintainer of the guide!**
+{: .notice--primary}
+
**Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!**
{: .notice--primary}
@@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name.
+ Cartman123
+ Cell9
+ coder65535
- + Cruel`
+ + Cruel
+ d0k3
+ dank101
+ Dazzozo
@@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name.
+ erman1337
+ felipejfc
+ figgyc
+ + fox8091
+ Frozen_Chen
+ Gelex
+ Hamcha
@@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name.
+ jkcgs
+ kartik
+ LordBass
- + MassExplosion123
+ mid-kid
+ MrNbaYoh
+ Mrrraou
+ Night_Fallen_Wolf
+ Normmatt
+ + Plailect
+ plutooo
+ Psi-Hate
+ RandallHoffman
diff --git a/_pages/cs_CZ/dsidumper.txt b/_pages/cs_CZ/dsidumper.txt
index 034e18f5cc..9762798a6c 100644
--- a/_pages/cs_CZ/dsidumper.txt
+++ b/_pages/cs_CZ/dsidumper.txt
@@ -2,36 +2,5 @@
title: "DSiDumper"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-To dump system DSiWare, we use an existing homebrew launcher exploit.
-
-If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing
-
-### What You Need
-
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases)
-
-#### Section I - Prep Work
-
-1. Power off your device
-1. Insert your SD card into your computer
-1. Copy your `movable.sed` file to the root of your SD card
-1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card
-1. Reinsert your SD card into your device
-1. Power on your device
-
-#### Section II - DSiWare Dumping
-
-1. Open the Homebrew Launcher using any method
-1. Launch DSiWare Dumper from the list of homebrew
- + This will dump a DSiWare application to SD root
- + It is normal to see several failures.
-1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide
-
-Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
-{: .notice--primary}
-
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
+{: .notice--warning}
diff --git a/_pages/cs_CZ/finalizing-setup.txt b/_pages/cs_CZ/finalizing-setup.txt
index 90f49a797f..2263b67b8b 100644
--- a/_pages/cs_CZ/finalizing-setup.txt
+++ b/_pages/cs_CZ/finalizing-setup.txt
@@ -8,7 +8,7 @@ title: "Finalizing Setup"
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
+In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
During this process, we also setup programs such as the following:
@@ -27,7 +27,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
-* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
+* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)*
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
@@ -177,7 +177,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the
{% capture notice-6 %}
If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card.
-If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac.
+If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/cs_CZ/formatting-sd-(linux).txt b/_pages/cs_CZ/formatting-sd-(linux).txt
new file mode 100644
index 0000000000..62d686163c
--- /dev/null
+++ b/_pages/cs_CZ/formatting-sd-(linux).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Linux)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(Windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Instructions
+#### Section I - Determining which slot your SD card is in
+
+1. Make sure your SD card is **not** inserted
+1. Launch the Linux Terminal
+1. Type `watch "lsblk"`
+1. Insert your SD card into your PC
+1. Observe the output. It should match something like this:
+```
+NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+mmcblk0 179:0 0 3,8G 0 disk
+└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
+```
+1. Take note of the device mount point. In our example above, it was `mmcblk0`
+ + If `RO` is set to 1, make sure the lock switch is not slid down
+1. Hit CTRL + C to exit the menu
+
+#### Section II - Formatting the card
+
+![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png)
+
+1. Type in `sudo cfdisk /dev/(device mount point from above)`
+1. On each partition, hit `Delete`
+1. Create a new Primary partition that covers the size of your entire SD card
+ + This will create a new partition with the linux filetype
+1. Select type and take a look at the menu
+1. Find "W95 FAT32" and take note of the code on the left side of that text
+1. Press any key, then enter the code you took note of in the previous step
+1. Hit enter, then hit Quit
diff --git a/_pages/cs_CZ/formatting-sd-(mac).txt b/_pages/cs_CZ/formatting-sd-(mac).txt
new file mode 100644
index 0000000000..c9c0ebf791
--- /dev/null
+++ b/_pages/cs_CZ/formatting-sd-(mac).txt
@@ -0,0 +1,60 @@
+---
+title: "Formatting SD (Mac)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages.
+
+### Instructions
+
+#### OS X El Capitan (10.11) and later
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. In the top-left "View" menu, choose "Show All Devices"
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Erase" at the top
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Ensure that "Scheme" is set to "Master Boot Record"
+ + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
+1. Click "Erase"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+#### OS X Yosemite (10.10) and earlier
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Partition" at the top
+ + If "Partition" does not appear, make sure to choose the device instead of a volume
+1. Ensure that "Partition Layout" is set to "1 Partition"
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Click "Options" below the partition table
+1. Choose "Master Boot Record"
+1. Click "OK"
+1. Click "Apply"
+1. Click "Partition"
+1. Wait for the format to finish
+1. Close Disk Utility
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
diff --git a/_pages/cs_CZ/formatting-sd-(windows).txt b/_pages/cs_CZ/formatting-sd-(windows).txt
new file mode 100644
index 0000000000..fb92106ee4
--- /dev/null
+++ b/_pages/cs_CZ/formatting-sd-(windows).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Windows)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### What You Need
+
+* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)
+
+### Instructions
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run `guiformat.exe`
+1. Select your SD card's drive letter for "Drive"
+
+ Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Select a size for "Allocation unit size"
+ + If the SD card is 64GB or below, choose 32768
+ * If the SD card is above 64GB, choose 65536
+1. Enter anything for "Volume label"
+1. Ensure that "Quick Format" is selected
+1. Click "Start"
+1. Click "OK"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+### Common Errors
+
+* Failed to open device: GetLastError()=32
+ + Close everything that may be using the SD card, such as any File Explorer windows.
diff --git a/_pages/cs_CZ/get-started.txt b/_pages/cs_CZ/get-started.txt
index 43812c5ebb..00833936df 100644
--- a/_pages/cs_CZ/get-started.txt
+++ b/_pages/cs_CZ/get-started.txt
@@ -6,7 +6,7 @@ title: "Get Started"
### Required Reading
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive.
Your device version can be found at the bottom right of the top screen of the System Settings.
@@ -60,19 +60,10 @@ We believe SpotPass and StreetPass are also safe for use at this time.
1.0.0 |
- 2.0.0 |
- Update to latest version or use an "All Versions" Method |
-
-
- 2.1.0 |
- 8.1.0 |
+ 11.3.0 |
Installing boot9strap (Soundhax) |
-
- 9.0.0 |
- 11.3.0 |
- Homebrew Launcher (Soundhax) |
-
+
11.4.0 |
11.13.0 |
Update to latest version or use an "All Versions" Method |
diff --git a/_pages/cs_CZ/home.txt b/_pages/cs_CZ/home.txt
index 11c0abea21..de0e6196bf 100644
--- a/_pages/cs_CZ/home.txt
+++ b/_pages/cs_CZ/home.txt
@@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
+ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup).
-+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.14.0 or below.
++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0).
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
-+ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). If your SD card is 64GB or larger, use an Allocation Unit Size of 64K (65536) instead.
++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/cs_CZ/homebrew-launcher-(pichaxx).txt b/_pages/cs_CZ/homebrew-launcher-(pichaxx).txt
index 5201af49bb..3e7eea3021 100644
--- a/_pages/cs_CZ/homebrew-launcher-(pichaxx).txt
+++ b/_pages/cs_CZ/homebrew-launcher-(pichaxx).txt
@@ -4,6 +4,9 @@ title: "Homebrew Launcher (PicHaxx)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
@@ -37,16 +40,17 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
1. Select your `movable.sed` file
1. Select "Build and Download"
1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
-1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card
+ Overwrite the old save file when prompted
1. Reinsert your SD card into your device
1. Power on your device
1. Launch "Pokemon Picross"
1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
+ + You may see an error stating there are no applications found
+1. Power off your device
___
diff --git a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
index 8667e8c287..04d8152155 100644
--- a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
+++ b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)*
### Instructions
diff --git a/_pages/cs_CZ/homebrew-launcher-(steelhax).txt b/_pages/cs_CZ/homebrew-launcher-(steelhax).txt
index 681be6021f..65ec1b9a69 100644
--- a/_pages/cs_CZ/homebrew-launcher-(steelhax).txt
+++ b/_pages/cs_CZ/homebrew-launcher-(steelhax).txt
@@ -2,62 +2,5 @@
title: "Homebrew Launcher (Steelhax)"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop.
-
-If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)).
-{: .notice--success}
-
-If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
{: .notice--warning}
-
-### What You Need
-
-* The free eShop game "Steel Diver: Sub Wars"
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip)
-* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)*
-
-### Instructions
-
-#### Section I - Prep Work
-
-1. Create a folder named `3ds` on the root of your SD card if it does not already exist
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card
-1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin`
-
-#### Section II - Steelminer
-
-1. Insert your SD card into your device
-1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
- + Decline the game update when prompted
- + If you have already updated the game, use the Data Management menu of the System Settings to delete the update
-1. Exit "Steel Diver: Sub Wars"
-1. Power off your device
-1. Insert your SD card into your computer
-1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer
-1. Select your `movable.sed` file
-1. Select "Start!"
-1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card
- + **EUR Region**: `000d7e00`
- + **JPN Region**: `000d7c00`
- + **USA Region**: `000d7d00`
-1. Copy the new downloaded save file to the `data` folder on your SD card
- + Overwrite the old save file when prompted
-1. Reinsert your SD card into your device
-1. Power on your device
-1. Launch "Steel Diver: Sub Wars"
-1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
-
-___
-
-### Continue to [DSiWare Dumper](dsidumper)
-{: .notice--primary}
diff --git a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt
index 46eedbe264..050739074c 100644
--- a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
@@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte
### What You Need
-* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper))
+* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3))
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
@@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte
#### Section II - Fredtool
-1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer
+1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer
1. Select your `movable.sed` file for the "Your movable.sed" field
1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field
1. Complete the "I'm not a robot" captcha
1. Select "Start"
1. Wait for the process to complete
1. When the process has completed, download your modified DSiWare archive from the site
- + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited)
+ + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited)
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + This `` folder will be another 32 letter/number folder inside the `` folder
- + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If the `Nintendo DSiWare` folder does not exist, create it inside of the ``
1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device
1. Power on your device
@@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Power off your device
1. Insert your SD card into your computer
-1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card
+1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/cs_CZ/installing-boot9strap-(frogtool).txt b/_pages/cs_CZ/installing-boot9strap-(frogtool).txt
index 01691c1a1d..b5434287fa 100644
--- a/_pages/cs_CZ/installing-boot9strap-(frogtool).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(frogtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.
@@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce)
* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
1. Insert your SD card into your computer
1. Copy your `movable.sed` file to the root of your SD card
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
1. Copy `frogcert.bin` to the root of your SD card
1. Reinsert your SD card into your device
@@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (Start) to save and reboot
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+#### Section V - Restoring DS Download Play
+
+1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+
___
### Continue to [Finalizing Setup](finalizing-setup)
diff --git a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
index 7ff5108da8..1e03aa7cf1 100644
--- a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
@@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS |
diff --git a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
index cde9885cfe..7004e6aff7 100644
--- a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
@@ -14,7 +14,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt
index 1ca04197d7..29c5140ec9 100644
--- a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt
@@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)"
### Required Reading
-Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions.
-
-{% capture notice-1 %}
-
-Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions.
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
### Instructions
@@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint
1. Power off your device
1. Insert your SD card into your computer
1. Copy the Soundhax `.m4a` to the root of your SD card
-1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin`
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.3dsx` to the root of your SD card
+1. Copy `otherapp.bin` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
-1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Reinsert your SD card into your device
1. Power on your device
@@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint
+ In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
- + If it freezes, just force the console to power off by holding the power button, then try again
+ + If it freezes, force the console to power off by holding the power button, then try again
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/cs_CZ/installing-boot9strap-(usm).txt b/_pages/cs_CZ/installing-boot9strap-(usm).txt
index 929aef5fad..d4f92965ff 100644
--- a/_pages/cs_CZ/installing-boot9strap-(usm).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(usm).txt
@@ -17,31 +17,32 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--danger}
+{: .notice--warning}
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release archive for [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
+1. If your device is powered on, power off your device
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
- + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
-1. If your console is powered on, power off your console
+ + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + If `Nintendo DSiWare` does not exist, create it
+1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If `Nintendo DSiWare` does not exist, create it inside of the ``
1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC
+ This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups
-1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder
+1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder
#### Section II - BannerBomb3
@@ -56,15 +57,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section III - unSAFE_MODE
-1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
- + Keep holding the buttons until the console boots into Safe Mode
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the device boots into Safe Mode
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
- + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+ + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
#### Section IV - Configuring Luma3DS
@@ -81,12 +82,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
1. Navigate to `Data Management` -> `DSiWare`
1. Click on the SD Card section
+ Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
-1. Power your system off
+1. Power off your device
1. Insert your SD card into your computer
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
-1. Continue to Finalizing Setup
___
diff --git a/_pages/cs_CZ/legacy-methods.txt b/_pages/cs_CZ/legacy-methods.txt
index 987a3ccfc9..b9da394c9c 100644
--- a/_pages/cs_CZ/legacy-methods.txt
+++ b/_pages/cs_CZ/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
+For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/cs_CZ/region-changing.txt b/_pages/cs_CZ/region-changing.txt
index 75af6091cf..595af43745 100644
--- a/_pages/cs_CZ/region-changing.txt
+++ b/_pages/cs_CZ/region-changing.txt
@@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
-After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
+After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue.
{: .notice--warning}
Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
@@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this.
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Reinsert your SD card into your device
-#### Section II - CTRTransfer
-
+#### Section II - NAND Backup
1. Launch GodMode9 by holding (Start) during boot
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
+ Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
+1. Press (Home) to bring up the action menu
+1. Select "Scripts..."
+1. Select "GM9Megascript"
+1. Select "Backup Options"
+1. Select "SysNAND Backup"
+1. Press (A) to confirm
+ + This process will take some time
+ + If you get an error, make sure that you have at least 1.3GB of free space on your SD card
+1. Press (A) to continue
+1. Press (B) to return to the main menu
+1. Select "Exit"
+1. Press (A) to relock write permissions if prompted
+1. Hold (R) and press (B) at the same time to eject your SD card
+1. Insert your SD card into your computer
+1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Make backups in multiple locations (such as online file storage)
+ + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
+1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+1. Reinsert your SD card into your device
+ + If your SD card was not detected, hold (R) and press (B) at the same time to remount it
+
+#### Section III - CTRTransfer
+
1. Navigate to `[0:] SDCARD` -> `gm9`
1. Press (A) on the CTRTransfer `.bin` to select it
1. Select "CTRNAND options..."
@@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
+ Updates while using B9S + Luma (what you have) are safe
+ If this gives you an error, set your DNS settings to "auto"
-#### Section III - Launching FBI
+#### Section IV - Launching FBI
1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})
1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu
@@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
1. Launch the Download Play application
1. Your device should load the Homebrew Launcher
-#### Section IV - Reinstalling Tickets
+#### Section V - Reinstalling Tickets
If script found no user tickets told you to skip this section, then skip this section
{: .notice--info}
@@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se
+ Press (B) to decline installing tickets from CDN.
1. Press (Home) to exit FBI
-#### Section V - Region settings
+#### Section VI - Region settings
1. Launch the System Settings
1. Go to "Other Settings", "Profile", then "Region Settings"
1. Select a country from the region you switched to
1. If prompted, you do not need to set a state
-#### Section VI - Remove CTRTransfer image
+#### Section VII - Remove CTRTransfer image
1. Launch GodMode9 by holding (Start) during boot
1. Navigate to `[0:] SDCARD` -> `gm9`
diff --git a/_pages/cs_CZ/seedminer.txt b/_pages/cs_CZ/seedminer.txt
index ff9a1fb4c3..7e0d97c6d2 100644
--- a/_pages/cs_CZ/seedminer.txt
+++ b/_pages/cs_CZ/seedminer.txt
@@ -35,7 +35,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
+ This folder name is also known as your "ID0"
1. Power on your device
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
+ + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
#### Section II - Seedminer
@@ -48,14 +48,14 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
1. Select "Go"
- + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section.
+ + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section
1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console
1. Wait for the site to update
+ If it does not, wait a few minutes before refreshing the page once
1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button
1. Wait for the remainder of the process to complete
- + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour.
- + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue.
+ + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour
+ + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
+ If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. When the process has completed, download your `movable.sed` file from the site
+ Keep this file as you will need it in the upcoming pages
@@ -66,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions except CHN and TWN.
+This method is compatible with all regions except CHN and TWN, and requires working shoulder buttons.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/cs_CZ/site-navigation.txt b/_pages/cs_CZ/site-navigation.txt
index 9f7a473f8a..dca1e3bba0 100644
--- a/_pages/cs_CZ/site-navigation.txt
+++ b/_pages/cs_CZ/site-navigation.txt
@@ -8,7 +8,7 @@ sitemap: false
**Popular**
+ [Finalizing Setup](finalizing-setup)
-+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,7 +21,6 @@ sitemap: false
+ [Cartridge Update](cart-update)
+ [Credits](credits)
+ [CTRTransfer](ctrtransfer)
-+ [DSiWare Dumper](dsidumper)
+ [Donations](donations)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -32,6 +31,9 @@ sitemap: false
+ [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system))
+ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi))
+ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds))
++ [Formatting SD (Linux)](formatting-sd-(linux))
++ [Formatting SD (Mac)](formatting-sd-(mac))
++ [Formatting SD (Windows)](formatting-sd-(windows))
+ [Get Started](get-started)
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
@@ -39,23 +41,22 @@ sitemap: false
+ [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives))
+ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx))
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax))
+ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa))
+ [Installing boot9strap (Browser)](installing-boot9strap-(browser))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
-+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
++ [Installing boot9strap (USM)](installing-boot9strap-(usm))
++ [Legacy Methods](legacy-methods)
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
+ [Seedminer](seedminer)
-+ [Legacy Seedminer Methods](legacy-methods)
+ [Troubleshooting](troubleshooting)
+ [Uninstall CFW](uninstall-cfw)
+ [Updating B9S](updating-b9s)
diff --git a/_pages/cs_CZ/updating-b9s.txt b/_pages/cs_CZ/updating-b9s.txt
index f4c4a38875..f5c1a5412f 100644
--- a/_pages/cs_CZ/updating-b9s.txt
+++ b/_pages/cs_CZ/updating-b9s.txt
@@ -26,8 +26,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
@@ -37,7 +36,6 @@ For all steps in this section, overwrite any existing files on your SD card.
{: .notice--info}
1. Insert your SD card into your computer
-1. Copy `boot.3dsx` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
@@ -56,7 +54,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Insert your SD card into your computer
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/de_DE/a9lh-to-b9s.txt b/_pages/de_DE/a9lh-to-b9s.txt
index b23c540283..a9f8f31047 100644
--- a/_pages/de_DE/a9lh-to-b9s.txt
+++ b/_pages/de_DE/a9lh-to-b9s.txt
@@ -14,9 +14,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
Um die `.7z` Dateien, welche auf dieser Seite verlinkt sind, entpacken zu können, benötigst du ein Archivprogramm wie zum Beispiel [7-Zip](http://www.7-zip.org/) oder [The Unarchiver](https://theunarchiver.com/).
-Wenn du eine PIN für Luma3DS aktiviert hast, wird SafeB9SInstaller einen "OTP Crypto Fail"-Fehler ausgeben, außer du deaktivierst deine PIN vorübergehend (nach dem Update kannst du die PIN wieder aktivieren).
-{: .notice--warning}
-
{% capture notice-1 %}
While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
@@ -40,11 +37,10 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm
{: .notice--info}
* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### Anleitung
@@ -55,8 +51,7 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm
1. Schalte deine Konsole aus
1. Stecke deine SD-Karte in deinen Computer
-1. Kopiere die Datei `boot.3dsx` in das Stammverzeichnis deiner SD-Karte
-1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card
1. Kopiere `arm9loaderhax.bin`aus der Version v7.0.5 Luma3DS `.7z`in das Stammverzeichnis deiner SD-Karte.
1. Lösche alle `.bin`-Payloads im `/luma/payloads/`-Ordner deiner SD-Karte, da sie mit den Luma3DS Versionen, die boot9strap unterstützen, nicht mehr kompatibel sind
1. Kopiere die Datei `SafeB9SInstaller.bin` von der SafeB9SInstaller `.zip` in den Ordner `/luma/payloads/` auf deiner SD-Karte
diff --git a/_pages/de_DE/bannerbomb3.txt b/_pages/de_DE/bannerbomb3.txt
index 071c5d7fb1..7385da2334 100644
--- a/_pages/de_DE/bannerbomb3.txt
+++ b/_pages/de_DE/bannerbomb3.txt
@@ -4,6 +4,9 @@ title: "BannerBomb3"
{% include toc title="Inhalt" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Lesen erforderlich
To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
diff --git a/_pages/de_DE/credits.txt b/_pages/de_DE/credits.txt
index db5df55200..3285ec39be 100644
--- a/_pages/de_DE/credits.txt
+++ b/_pages/de_DE/credits.txt
@@ -2,6 +2,9 @@
title: "Danksagung"
---
+**Special thanks to Plailect, the original creator and maintainer of the guide!**
+{: .notice--primary}
+
**Vielen Dank an alle Nutzer aus [#Cakey auf Freenode](http://webchat.freenode.net/?channels=%23Cakey)! Ihr seid großartig!**
{: .notice--primary}
@@ -22,7 +25,7 @@ Sollte ich vergessen haben, dich hier aufzuführen, dann kontaktiere mich und ic
+ Cartman123
+ Cell9
+ coder65535
- + Cruel`
+ + Cruel
+ d0k3
+ dank101
+ Dazzozo
@@ -35,6 +38,7 @@ Sollte ich vergessen haben, dich hier aufzuführen, dann kontaktiere mich und ic
+ erman1337
+ felipejfc
+ figgyc
+ + fox8091
+ Frozen_Chen
+ Gelex
+ Hamcha
@@ -46,12 +50,12 @@ Sollte ich vergessen haben, dich hier aufzuführen, dann kontaktiere mich und ic
+ jkcgs
+ kartik
+ LordBass
- + MassExplosion123
+ mid-kid
+ MrNbaYoh
+ Mrrraou
+ Night_Fallen_Wolf
+ Normmatt
+ + Plailect
+ plutooo
+ Psi-Hate
+ RandallHoffman
diff --git a/_pages/de_DE/dsidumper.txt b/_pages/de_DE/dsidumper.txt
index d3053d86b6..9762798a6c 100644
--- a/_pages/de_DE/dsidumper.txt
+++ b/_pages/de_DE/dsidumper.txt
@@ -2,36 +2,5 @@
title: "DSiDumper"
---
-{% include toc title="Inhalt" %}
-
-### Lesen erforderlich
-
-To dump system DSiWare, we use an existing homebrew launcher exploit.
-
-If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing
-
-### Was du brauchst
-
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases)
-
-#### Schritt I - Vorbereitungen
-
-1. Schalte deinen 3DS aus
-1. Stecke deine SD-Karte in deinen Computer
-1. Copy your `movable.sed` file to the root of your SD card
-1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card
-1. Stecke deine SD-Karte nun wieder in deinen 3DS
-1. Schalte deine Konsole an
-
-#### Section II - DSiWare Dumping
-
-1. Open the Homebrew Launcher using any method
-1. Launch DSiWare Dumper from the list of homebrew
- + This will dump a DSiWare application to SD root
- + It is normal to see several failures.
-1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide
-
-Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
-{: .notice--primary}
-
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
+{: .notice--warning}
diff --git a/_pages/de_DE/finalizing-setup.txt b/_pages/de_DE/finalizing-setup.txt
index 0c6bf8c6db..f8f5a4c8ce 100644
--- a/_pages/de_DE/finalizing-setup.txt
+++ b/_pages/de_DE/finalizing-setup.txt
@@ -8,7 +8,7 @@ title: "Setup abschließen"
Die Datei "boot.firm", die von boot9strap gestartet wird nachdem es vom NAND geladen wurde kann jeder funktionierende ARM9-Payload sein, wenn er im FIRM-Format ist. Die Datei kann jederzeit ersetzt werden, obwohl Luma3DS bei dem Start anderer ARM9-Payloads im FIRM-Format den Luma3DS-Chainloader benutzt.
-In diesem Fall verwendest du Luma3DS von [AuroraWright](https://github.com/AuroraWright/), um direkt einen gepatchten SysNAND zu starten. Dies erlaubt es dir, die Notwendigkeit eines EmuNAND jeglicher Art komplett zu umgehen, was die Nutzung eines gehackten 3DS wesentlich erleichtert, sowie Speicherplatz auf der SD-Karte spart.
+In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
Während dieses Prozesses richtest du auch folgende Programme ein:
@@ -27,7 +27,7 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
-* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
+* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)*
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
@@ -177,7 +177,7 @@ Du kannst nun (L) + (Steuerkreuz unten) + (Select) drücken, während das System
{% capture notice-6 %}
Wenn du eine größere SD-Karte verwenden möchtest, musst du diese nur in FAT32 formatieren und die Dateien von der alten SD-Karte auf die neue, größere verschieben.
-Wenn deine neue SD-Karte größer als 32GB ist, benötigst du zum Formatieren andere Programme, wie [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) für Windows, [gparted](http://gparted.org/download.php) für Linux, oder [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) für Mac.
+If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/de_DE/formatting-sd-(linux).txt b/_pages/de_DE/formatting-sd-(linux).txt
new file mode 100644
index 0000000000..2ca71d3147
--- /dev/null
+++ b/_pages/de_DE/formatting-sd-(linux).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Linux)"
+---
+
+{% include toc title="Inhalt" %}
+
+### Lesen erforderlich
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+Diese Seite ist nur für Linux-Nutzer gedacht. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(Windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Anleitung
+#### Section I - Determining which slot your SD card is in
+
+1. Make sure your SD card is **not** inserted
+1. Launch the Linux Terminal
+1. Type `watch "lsblk"`
+1. Insert your SD card into your PC
+1. Observe the output. It should match something like this:
+```
+NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+mmcblk0 179:0 0 3,8G 0 disk
+└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
+```
+1. Take note of the device mount point. In our example above, it was `mmcblk0`
+ + If `RO` is set to 1, make sure the lock switch is not slid down
+1. Hit CTRL + C to exit the menu
+
+#### Section II - Formatting the card
+
+![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png)
+
+1. Type in `sudo cfdisk /dev/(device mount point from above)`
+1. On each partition, hit `Delete`
+1. Create a new Primary partition that covers the size of your entire SD card
+ + This will create a new partition with the linux filetype
+1. Select type and take a look at the menu
+1. Find "W95 FAT32" and take note of the code on the left side of that text
+1. Press any key, then enter the code you took note of in the previous step
+1. Hit enter, then hit Quit
diff --git a/_pages/de_DE/formatting-sd-(mac).txt b/_pages/de_DE/formatting-sd-(mac).txt
new file mode 100644
index 0000000000..3d3780fa38
--- /dev/null
+++ b/_pages/de_DE/formatting-sd-(mac).txt
@@ -0,0 +1,60 @@
+---
+title: "Formatting SD (Mac)"
+---
+
+{% include toc title="Inhalt" %}
+
+### Lesen erforderlich
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+Diese Seite ist nur für macOS-Nutzer. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages.
+
+### Anleitung
+
+#### OS X El Capitan (10.11) and later
+
+1. Stecke deine SD-Karte in deinen Computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. In the top-left "View" menu, choose "Show All Devices"
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Erase" at the top
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Ensure that "Scheme" is set to "Master Boot Record"
+ + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
+1. Click "Erase"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+#### OS X Yosemite (10.10) and earlier
+
+1. Stecke deine SD-Karte in deinen Computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Partition" at the top
+ + If "Partition" does not appear, make sure to choose the device instead of a volume
+1. Ensure that "Partition Layout" is set to "1 Partition"
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Click "Options" below the partition table
+1. Choose "Master Boot Record"
+1. Click "OK"
+1. Click "Apply"
+1. Click "Partition"
+1. Wait for the format to finish
+1. Close Disk Utility
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
diff --git a/_pages/de_DE/formatting-sd-(windows).txt b/_pages/de_DE/formatting-sd-(windows).txt
new file mode 100644
index 0000000000..aa6be6dc5d
--- /dev/null
+++ b/_pages/de_DE/formatting-sd-(windows).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Windows)"
+---
+
+{% include toc title="Inhalt" %}
+
+### Lesen erforderlich
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+Diese Seite ist nur für Windowsnutzer gedacht. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Was du brauchst
+
+* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)
+
+### Anleitung
+
+1. Stecke deine SD-Karte in deinen Computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run `guiformat.exe`
+1. Select your SD card's drive letter for "Drive"
+
+ Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Select a size for "Allocation unit size"
+ + If the SD card is 64GB or below, choose 32768
+ * If the SD card is above 64GB, choose 65536
+1. Enter anything for "Volume label"
+1. Ensure that "Quick Format" is selected
+1. Click "Start"
+1. Click "OK"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+### Common Errors
+
+* Failed to open device: GetLastError()=32
+ + Close everything that may be using the SD card, such as any File Explorer windows.
diff --git a/_pages/de_DE/get-started.txt b/_pages/de_DE/get-started.txt
index de3f52eeff..b3153b899e 100644
--- a/_pages/de_DE/get-started.txt
+++ b/_pages/de_DE/get-started.txt
@@ -6,7 +6,7 @@ title: "Los geht's"
### Lesen erforderlich
-Wähle die entsprechende Seite für deine Version aus der unten folgenden Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Spalte "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
+Wähle die entsprechende Seite für deine Version aus der unten folgenden Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind.
Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den Systemeinstellungen.
@@ -60,19 +60,10 @@ We believe SpotPass and StreetPass are also safe for use at this time.
1.0.0 |
- 2.0.0 |
- Update to latest version or use an "All Versions" Method |
-
-
- 2.1.0 |
- 8.1.0 |
+ 11.3.0 |
Installing boot9strap (Soundhax) |
-
- 9.0.0 |
- 11.3.0 |
- Homebrew Launcher (Soundhax) |
-
+
11.4.0 |
11.13.0 |
Update to latest version or use an "All Versions" Method |
diff --git a/_pages/de_DE/home.txt b/_pages/de_DE/home.txt
index 2534f52eb2..afae19f713 100644
--- a/_pages/de_DE/home.txt
+++ b/_pages/de_DE/home.txt
@@ -78,11 +78,11 @@ Für eine Liste aller berechneten sighax-Signaturen, siehe in [diesem gist](http
+ **Bevor du mit dieser Anleitung anfängst, musst du die Risiken kennen: JEDES mal wenn du deinen 3DS modifizierst, besteht die Gefahr eines BRICKS, der deine Konsole UNWIDERRUFLICH unbrauchbar macht. Ein Brick tritt selten auf, aber ein Restrisiko bleibt bestehen, also befolge ALLE Anweisungen dieser Anleitung GENAUESTENS.**
+ Wenn du deinen 3DS bereits modifiziert hast und bereits über ein EmuNAND-Setup verfügst, kannst du den Inhalt des vorherigen EmuNANDs auf dein neues CFW-SysNAND transferieren. Befolge dazu alle Anweisungen zum Wiederherstellen des EmuNAND sobald du im Abschnitt [Setup fertigstellen](finalizing-setup) dazu aufgefordert wirst.
-+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.14.0 or below.
++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0).
+ Wenn alles nach Plan verläuft, wirst du keine Daten verlieren und dein System wird die gleichen Daten wie vorher haben (Spiele, NNID, Speicherstände, etc. werden erhalten bleiben).
+ Deine Konsole während des gesamten Prozesses mit dem Ladekabel aufzuladen vermeidet Datenverluste oder Schäden durch unerwartetes Ausschalten!
+ Deine SD-Karte sollte mit [MBR, nicht GPT](http://www.howtogeek.com/245610/) formatiert sein. (Die mitgelieferte SD-Karte ist standardmäßig mit MBR formatiert). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
-+ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). If your SD card is 64GB or larger, use an Allocation Unit Size of 64K (65536) instead.
++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/de_DE/homebrew-launcher-(pichaxx).txt b/_pages/de_DE/homebrew-launcher-(pichaxx).txt
index da23782995..c152740f41 100644
--- a/_pages/de_DE/homebrew-launcher-(pichaxx).txt
+++ b/_pages/de_DE/homebrew-launcher-(pichaxx).txt
@@ -4,6 +4,9 @@ title: "Homebrew Launcher (PicHaxx)"
{% include toc title="Inhalt" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Lesen erforderlich
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
@@ -37,16 +40,17 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
1. Select your `movable.sed` file
1. Select "Build and Download"
1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
-1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card
+ Overwrite the old save file when prompted
1. Stecke deine SD-Karte nun wieder in deinen 3DS
1. Schalte deine Konsole an
1. Launch "Pokemon Picross"
1. Wenn der Exploit erfolgreich war, wird der Homebrew Launcher gestartet
- + You may see an error stating there are no applications found.
-1. Power off your device.
+ + You may see an error stating there are no applications found
+1. Schalte deinen 3DS aus
___
diff --git a/_pages/de_DE/homebrew-launcher-(soundhax).txt b/_pages/de_DE/homebrew-launcher-(soundhax).txt
index 5270c163f1..9e90ce7130 100644
--- a/_pages/de_DE/homebrew-launcher-(soundhax).txt
+++ b/_pages/de_DE/homebrew-launcher-(soundhax).txt
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint
### Was du brauchst
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)*
### Anleitung
diff --git a/_pages/de_DE/homebrew-launcher-(steelhax).txt b/_pages/de_DE/homebrew-launcher-(steelhax).txt
index 2b213715d5..65ec1b9a69 100644
--- a/_pages/de_DE/homebrew-launcher-(steelhax).txt
+++ b/_pages/de_DE/homebrew-launcher-(steelhax).txt
@@ -2,62 +2,5 @@
title: "Homebrew Launcher (Steelhax)"
---
-{% include toc title="Inhalt" %}
-
-### Lesen erforderlich
-
-This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop.
-
-If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)).
-{: .notice--success}
-
-If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
{: .notice--warning}
-
-### Was du brauchst
-
-* The free eShop game "Steel Diver: Sub Wars"
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip)
-* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)*
-
-### Anleitung
-
-#### Schritt I - Vorbereitungen
-
-1. Erstelle einen Ordner namens `3ds` im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
-1. Kopiere die `boot.3dsx`-Datei in das Stammverzeichnis deiner SD-Karte
-1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card
-1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin`
-
-#### Section II - Steelminer
-
-1. Insert your SD card into your device
-1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
- + Decline the game update when prompted
- + If you have already updated the game, use the Data Management menu of the System Settings to delete the update
-1. Exit "Steel Diver: Sub Wars"
-1. Schalte deinen 3DS aus
-1. Stecke deine SD-Karte in deinen Computer
-1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer
-1. Select your `movable.sed` file
-1. Select "Start!"
-1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card
- + **EUR Region**: `000d7e00`
- + **JPN Region**: `000d7c00`
- + **USA Region**: `000d7d00`
-1. Copy the new downloaded save file to the `data` folder on your SD card
- + Overwrite the old save file when prompted
-1. Stecke deine SD-Karte nun wieder in deinen 3DS
-1. Schalte deine Konsole an
-1. Launch "Steel Diver: Sub Wars"
-1. Wenn der Exploit erfolgreich war, wird der Homebrew Launcher gestartet
- + You may see an error stating there are no applications found.
-1. Power off your device.
-
-___
-
-### Continue to [DSiWare Dumper](dsidumper)
-{: .notice--primary}
diff --git a/_pages/de_DE/installing-boot9strap-(fredtool).txt b/_pages/de_DE/installing-boot9strap-(fredtool).txt
index c38cdd8292..23476608f4 100644
--- a/_pages/de_DE/installing-boot9strap-(fredtool).txt
+++ b/_pages/de_DE/installing-boot9strap-(fredtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)"
{% include toc title="Inhalt" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Lesen erforderlich
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
@@ -12,11 +15,11 @@ Dies ist eine zurzeit funktionierende Implementation des "FIRM Partitions Known-
### Was du brauchst
-* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper))
+* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3))
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Schritt I - Vorbereitungen
@@ -28,18 +31,18 @@ Dies ist eine zurzeit funktionierende Implementation des "FIRM Partitions Known-
#### Section II - Fredtool
-1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer
+1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer
1. Select your `movable.sed` file for the "Your movable.sed" field
1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field
1. Complete the "I'm not a robot" captcha
1. Select "Start"
1. Wait for the process to complete
1. When the process has completed, download your modified DSiWare archive from the site
- + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited)
+ + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited)
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + This `` folder will be another 32 letter/number folder inside the `` folder
- + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If the `Nintendo DSiWare` folder does not exist, create it inside of the ``
1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder
1. Stecke deine SD-Karte nun wieder in deinen 3DS
1. Schalte deine Konsole an
@@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Schalte deinen 3DS aus
1. Stecke deine SD-Karte in deinen Computer
-1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card
+1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Stecke deine SD-Karte nun wieder in deinen 3DS
1. Schalte deine Konsole an
diff --git a/_pages/de_DE/installing-boot9strap-(frogtool).txt b/_pages/de_DE/installing-boot9strap-(frogtool).txt
index 5c75d359e2..98fcf28de4 100644
--- a/_pages/de_DE/installing-boot9strap-(frogtool).txt
+++ b/_pages/de_DE/installing-boot9strap-(frogtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)"
{% include toc title="Inhalt" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Lesen erforderlich
We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.
@@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce)
* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Schritt I - Vorbereitungen
1. Stecke deine SD-Karte in deinen Computer
1. Copy your `movable.sed` file to the root of your SD card
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
1. Copy `frogcert.bin` to the root of your SD card
1. Stecke deine SD-Karte nun wieder in deinen 3DS
@@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Drücke (Start) zum Speichern und neustarten
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+#### Section V - Restoring DS Download Play
+
+1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Wähle "Miscellaneous options"
+1. Wähle "Switch the hb. title to the current app."
+1. Drücke (B) um fortzufahren
+1. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren
+1. Drücke (B), um das Rosalina-Menü zu schließen
+1. Drücke (Home) und schließe die Download-Spiel Anwendung
+1. Relaunch the Download Play application
+1. Deine Konsole sollte den Homebrew Launcher laden
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+
___
### Fortfahren mit [Setup fertigstellen](finalizing-setup)
diff --git a/_pages/de_DE/installing-boot9strap-(hardmod).txt b/_pages/de_DE/installing-boot9strap-(hardmod).txt
index c67ff0d5d7..303ab0daf0 100644
--- a/_pages/de_DE/installing-boot9strap-(hardmod).txt
+++ b/_pages/de_DE/installing-boot9strap-(hardmod).txt
@@ -22,7 +22,7 @@ Dies funktioniert auf mit New 3DS, New 2DS, Old 3DS und Old 2DS auf *allen* Vers
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows-Benutzer können die kompilierte `.exe` benutzen, während Mac und Linux-Benutzer [Python 3] (https://www.python.org/downloads/) installiert haben müssen, um die `.py` auszuführen
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* Die `.firm` entsprechend deiner Konsole und Firmware:
| Version(en) | Kernel | Old 3DS oder Old 2DS | New 3DS oder New 2DS |
diff --git a/_pages/de_DE/installing-boot9strap-(ntrboot).txt b/_pages/de_DE/installing-boot9strap-(ntrboot).txt
index 486838e39c..351ea973c1 100644
--- a/_pages/de_DE/installing-boot9strap-(ntrboot).txt
+++ b/_pages/de_DE/installing-boot9strap-(ntrboot).txt
@@ -14,7 +14,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Deine ntrboot geflashte Flashkarte
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Anleitung
diff --git a/_pages/de_DE/installing-boot9strap-(soundhax).txt b/_pages/de_DE/installing-boot9strap-(soundhax).txt
index d77042a47c..ff1aab41a8 100644
--- a/_pages/de_DE/installing-boot9strap-(soundhax).txt
+++ b/_pages/de_DE/installing-boot9strap-(soundhax).txt
@@ -6,25 +6,16 @@ title: "Installation von boot9strap (Soundhax)"
### Lesen erforderlich
-Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions.
-
-{% capture notice-1 %}
-
-Beachte, dass Karten-Updates nur Updates für Kernfunktionen, wie die Systemeinstellungen, das Home-Menü und ähnlichem liefern. Karten-Updates aktualisieren nicht den Nintendo 3DS Sound und die Netzwerkfunktionen, wie den Internetbrowser, den eShop, die StreetPass Mii Plaza oder der System-Transfer.
-
-This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions.
### Was du brauchst
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
### Anleitung
@@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint
1. Schalte deinen 3DS aus
1. Stecke deine SD-Karte in deinen Computer
1. Kopiere die Soundhax`.m4a` in das Stammverzeichnis der SD-Karte
-1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin`
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-1. Kopiere die `boot.3dsx`-Datei in das Stammverzeichnis deiner SD-Karte
+1. Copy `otherapp.bin` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte
1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
-1. Kopiere `arm9.bin` aus der SafeB9SInstaller `.zip` in das Stammverzeichnis deiner SD-Karte
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Stecke deine SD-Karte nun wieder in deinen 3DS
1. Schalte deine Konsole an
@@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint
+ In dieser Situation würde das Starten von Soundhax sofort dazu führen, dass diese Tipps, bei jedem Start des Nintendo 3DS Sound angezeigt werden, bis dies geschehen ist
1. Gehe zu `/SDCARD` und spiele die Datei "<3 nedwill 2016" ab
+ Dies kann einige Versuche benötigen
- + Wenn sich deine Konsole aufhängt, schalte sie durch langes halten des Power-Knopfes aus, und versuche es erneut
+ + If it freezes, force the console to power off by holding the power button, then try again
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/de_DE/installing-boot9strap-(usm).txt b/_pages/de_DE/installing-boot9strap-(usm).txt
index a3f4d1e1dc..130327effe 100644
--- a/_pages/de_DE/installing-boot9strap-(usm).txt
+++ b/_pages/de_DE/installing-boot9strap-(usm).txt
@@ -17,31 +17,32 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--danger}
+{: .notice--warning}
### Was du brauchst
* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release archive for [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Schritt I - Vorbereitungen
+1. If your device is powered on, power off your device
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
- + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
-1. If your console is powered on, power off your console
+ + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
1. Stecke deine SD-Karte in deinen Computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + If `Nintendo DSiWare` does not exist, create it
+1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If `Nintendo DSiWare` does not exist, create it inside of the ``
1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC
+ This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups
-1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder
+1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder
#### Section II - BannerBomb3
@@ -56,15 +57,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section III - unSAFE_MODE
-1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
- + Keep holding the buttons until the console boots into Safe Mode
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the device boots into Safe Mode
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
- + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+ + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
#### Schritt IV - Luma3DS konfigurieren
@@ -81,12 +82,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
1. Navigate to `Data Management` -> `DSiWare`
1. Click on the SD Card section
+ Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
-1. Power your system off
+1. Schalte deinen 3DS aus
1. Stecke deine SD-Karte in deinen Computer
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
-1. Continue to Finalizing Setup
___
diff --git a/_pages/de_DE/legacy-methods.txt b/_pages/de_DE/legacy-methods.txt
index ab3f16a2cb..5c97a342ed 100644
--- a/_pages/de_DE/legacy-methods.txt
+++ b/_pages/de_DE/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
+For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/de_DE/region-changing.txt b/_pages/de_DE/region-changing.txt
index 5c69b4b99d..511513723d 100644
--- a/_pages/de_DE/region-changing.txt
+++ b/_pages/de_DE/region-changing.txt
@@ -17,7 +17,7 @@ Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma
Durch diesen Vorgang wird die Verknüpfung deiner NNID mit der Konsole aufgehoben, da diese nicht mehr mit der neuen Region kompatibel ist. NNIDs sind an die Region der Konsole gebunden, mit der sie erstmalig erstellt wurden und können nur über [einen sehr komplexen Prozess](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt) zwischen den verschiedenen Regionen transferiert werden.
{: .notice--warning}
-Nach diesem Vorgang werden nur **New 3DS, welche den eShop noch nie zuvor besucht haben** und **alle Old 3DS** in der Lage sein den eShop zu besuchen, nachdem eine neue NNID in der neuen Region erstellt wurde. New 3DS, die schon einmal den eShop ihrer originalen Region besucht haben, können keine neue NNID erstellen und somit den eShop in der neuen Region nicht mehr besuchen!
+After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue.
{: .notice--warning}
Beachte, dass der eShop ab und zu, aus unerklärlichen Gründen auf Geräten, auf denen er eigentlich funktionieren sollte, nicht aufrufbar ist. Dies liegt komplett an den Serven von Nintendo. Ich habe darauf absolut keinen Einfluss. Ähnlich der oben stehenden Warnung, funktioniert der eShop unerwarteterweise ab und zu mal auf Geräten, auf denen er nicht funktionieren sollte (wie auf manchen New 3DS). Die Ursache hierfür ist derzeit unbekannt.
@@ -55,12 +55,34 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um
1. Kopiere `FBI.3dsx` in den `/3ds/`-Ordner auf deiner SD-Karte
1. Stecke deine SD-Karte nun wieder in deinen 3DS
-#### Schritt II - CTRTransfer
-
+#### Section II - NAND Backup
1. Starte GodMode9, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst
1. Wenn du aufgefordert wirst, ein "essential files backup" durchzuführen, drücke (A). Drücke erneut (A) nachdem es abgeschlossen ist
1. Wenn du aufgefordert wirst Datum und Uhrzeit der "RTC" (Real Time Clock, Echtzeituhr) zu korrigieren, drücke (A), stelle Datum und Uhrzeit ein und drücke (A) um fortzufahren
+ Bitte beachte, falls du die RTC korrigieren musstest, dass du nach beenden der Anleitung auch Datum und Uhrzeit in den Systemeinstellungen korrigieren musst
+1. Drücke (HOME) um das Aktionsmenü aufzurufen
+1. Wähle "Scripts"
+1. Select "GM9Megascript"
+1. Select "Backup Options"
+1. Select "SysNAND Backup"
+1. Drücke (A) um zu bestätigen
+ + Dieser Prozess kann einige Zeit in Anspruch nehmen
+ + If you get an error, make sure that you have at least 1.3GB of free space on your SD card
+1. Drücke (A) um fortzufahren
+1. Drücke (B), um zum Hauptmenü zurückzukehren
+1. Select "Exit"
+1. Drücke (A), um die Schreibrechte zu deaktivieren, wenn du dazu aufgefordert wirst
+1. Drücke (R) und (B) gleichzeitig um die SD-Karte auszuwerfen
+1. Stecke deine SD-Karte in deinen Computer
+1. Kopiere `__sysnand_###.bin` und `essential.exefs`vom `/gm9/out/`Ordner der SD-Karte an einen sicheren Ort auf deinem Rechner
+ + Erstelle Backup Dateien an mehreren Orten (USB-Stick, PC, Externe Festplatte, Online-Speicher, etc.)
+ + Diese Backups werden im Falle eines Bricks benötigt, um Daten aus dem NAND-Image wieder herzustellen, wenn etwas schief gehen sollte
+1. Lösche `__sysnand_###.bin` und `__sysnand_###.bin.sha`aus dem `/gm9/out/` Ordner der SD-Karte nachdem du diese kopiert hast
+1. Stecke deine SD-Karte nun wieder in deinen 3DS
+ + If your SD card was not detected, hold (R) and press (B) at the same time to remount it
+
+#### Section III - CTRTransfer
+
1. Navigiere zu `[0:] SDCARD` -> `gm9`
1. Drücke (A) auf der CTRTrasnfer `.bin`, um diese auszuwählen
1. Wähle "CTRNAND Options..." aus
@@ -68,7 +90,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um
1. Sollte eine Aufforderung erscheinen, so wähle "Transfer to SysNAND"
+ Diese Aufforderung erscheint nur, wenn du eine EmuNAND besitzt
1. Drücke (A), um die SysNAND (Stufe 1) Bearbeitung zu aktivieren. Dann gebe die angegebene Tastenkombination ein
- + Dieser Prozess kann einige Zeit in Anspruch nehmen
+ + Dieser Vorgang nimmt einige Zeit in Anspruch
1. Sobald der Transfer abgeschlossen wurde, drücke (A) um fortzufahren
1. Drücke (B), um die Schreibrechte nicht zu deaktiveren
1. Drücke zweimal (B), um zurück in das Hauptmenü zu gelangen
@@ -87,7 +109,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um
+ Updates mit B9S + Luma (welches du hast) sind sicher
+ Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
-#### Schritt III - Starten von FBI
+#### Section IV - Launching FBI
1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})
1. Drücke gleichzeitig (L) + (Steuerkreuz unten) + (Select) um das Rosalina Menü zu öffnen
@@ -100,7 +122,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um
1. Starte die Download-Spiel Anwendung
1. Deine Konsole sollte den Homebrew Launcher laden
-#### Schritt IV - Tickets wiederherstellen
+#### Section V - Reinstalling Tickets
Falls das Skript kein User-Ticket gefunden hat und dich anweist folgende Sektion zu überspringen, überspringe sie
{: .notice--info}
@@ -120,19 +142,19 @@ Falls das Skript kein User-Ticket gefunden hat und dich anweist folgende Sektion
+ Drücke (B) um das installieren der tickets vom CDN zu verweigern.
1. Drücke (HOME), um FBI zu verlassen
-#### Schritt V - Regions-Einstellungen
+#### Section VI - Region settings
1. Öffne die Systemeinstellungen
1. Gehe zu "Allgemeine Einstellungen", "Nutzereinstellungen", dann "Region wählen"
1. Wähle ein Land der Region, zu welcher du gewechselt hast
1. Falls aufgefordert, musst du keinen Staat einstellen
-#### Schritt VI - CTRTransfer Abbild entfernen
+#### Section VII - Remove CTRTransfer image
1. Starte GodMode9, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst
1. Navigiere zu `[0:] SDCARD` -> `gm9`
1. Drücke (X) auf die CTRTransfer-Abbild `.bin` um es zu löschen
-1. Drücke (A) um zu bestätigen
+1. Drücke (A), um zu bestätigen
1. Drücke (Start) um dein Gerät neu zu starten
___
diff --git a/_pages/de_DE/seedminer.txt b/_pages/de_DE/seedminer.txt
index 3301d57d62..7f0a7f8e9a 100644
--- a/_pages/de_DE/seedminer.txt
+++ b/_pages/de_DE/seedminer.txt
@@ -35,7 +35,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
+ This folder name is also known as your "ID0"
1. Schalte deine Konsole an
1. Öffne deine Freundesliste (das [Icon mit dem orangenen Gesicht]({{ "/images/friend-list-icon.png" | absolute_url }}) in der obersten Zeile des Home-Menüs)
- + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
+ + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
#### Section II - Seedminer
@@ -48,14 +48,14 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
1. Select "Go"
- + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section.
+ + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section
1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console
1. Wait for the site to update
+ If it does not, wait a few minutes before refreshing the page once
1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button
1. Wait for the remainder of the process to complete
- + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour.
- + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue.
+ + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour
+ + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
+ If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. When the process has completed, download your `movable.sed` file from the site
+ Keep this file as you will need it in the upcoming pages
@@ -66,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions except CHN and TWN.
+This method is compatible with all regions except CHN and TWN, and requires working shoulder buttons.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/de_DE/site-navigation.txt b/_pages/de_DE/site-navigation.txt
index 41fce4d574..24a0a9c5a4 100644
--- a/_pages/de_DE/site-navigation.txt
+++ b/_pages/de_DE/site-navigation.txt
@@ -8,7 +8,7 @@ sitemap: false
**Beliebt**
+ [Setup fertigstellen](finalizing-setup)
-+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
++ [Installation von boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,7 +21,6 @@ sitemap: false
+ [Kartenupdate](cart-update)
+ [Danksagungen](credits)
+ [CTRTransfer](ctrtransfer)
-+ [DSiWare Dumper](dsidumper)
+ [Spenden](donations)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -32,6 +31,9 @@ sitemap: false
+ [ntrboot flashen (3DS Multi System)](flashing-ntrboot-(3ds-multi-system))
+ [ntrboot flashen (DSi)](flashing-ntrboot-(dsi))
+ [ntrboot flashen (NDS)](flashing-ntrboot-(nds))
++ [Formatting SD (Linux)](formatting-sd-(linux))
++ [Formatting SD (Mac)](formatting-sd-(mac))
++ [Formatting SD (Windows)](formatting-sd-(windows))
+ [Los geht's](get-started)
+ [GodMode9 Bedienung](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
@@ -39,23 +41,22 @@ sitemap: false
+ [Homebrew Launcher (Alternativen)](homebrew-launcher-(alternatives))
+ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx))
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax))
+ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa))
+ [Installation von boot9strap (Browser)](installing-boot9strap-(browser))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installation von boot9strap (Hardmod)](installing-boot9strap-(hardmod))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Installation von boot9strap (MSET)](installing-boot9strap-(mset))
+ [Installation von boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installation von boot9strap (Soundhax)](installing-boot9strap-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
-+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
++ [Installing boot9strap (USM)](installing-boot9strap-(usm))
++ [Legacy Methods](legacy-methods)
+ [EmuNAND verschieben](move-emunand)
+ [ntrboot](ntrboot)
+ [Wechseln der Region](region-changing)
+ [Seedminer](seedminer)
-+ [Legacy Seedminer Methods](legacy-methods)
+ [Problembehandlung](troubleshooting)
+ [CFW deinstallieren](uninstall-cfw)
+ [B9S updaten](updating-b9s)
diff --git a/_pages/de_DE/updating-b9s.txt b/_pages/de_DE/updating-b9s.txt
index 8cae411eae..2030091098 100644
--- a/_pages/de_DE/updating-b9s.txt
+++ b/_pages/de_DE/updating-b9s.txt
@@ -26,8 +26,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Anleitung
@@ -37,7 +36,6 @@ We believe SpotPass and StreetPass are also safe for use at this time.
{: .notice--info}
1. Stecke deine SD-Karte in deinen Computer
-1. Kopiere die `boot.3dsx`-Datei in das Stammverzeichnis deiner SD-Karte
1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte
1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
1. Kopiere `SafeB9SInstaller.firm` von der SafeB9SInstaller `.zip` in den `/luma/payloads/`-Ordner auf deiner SD-Karte
@@ -56,7 +54,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
1. Schalte deinen 3DS aus
1. Stecke deine SD-Karte in deinen Computer
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Stecke deine SD-Karte nun wieder in deinen 3DS
1. Schalte deine Konsole an
diff --git a/_pages/el_GR/a9lh-to-b9s.txt b/_pages/el_GR/a9lh-to-b9s.txt
index a6692666b2..318f2cae8f 100644
--- a/_pages/el_GR/a9lh-to-b9s.txt
+++ b/_pages/el_GR/a9lh-to-b9s.txt
@@ -14,9 +14,6 @@
Για να αποσυμπιέσετε τα επισυναπτόμενα αρχεία '.7z' , θα χρειαστείτε ένα πρόγραμμα αρχειοθέτησης όπως το [7-Zip](http://www.7-zip.org/) ή το [The Unarchiver](https://theunarchiver.com/).
-Εάν έχετε ενεργοποιημένο PIN στο Luma3DS, το SafeB9SInstaller θα σας δώσει το σφάλμα "OTP Crypto Fail", εκτός αν απενεργοποιήσετε προσωρινά το PIN σας (μπορείτε να το ενεργοποιήσετε ξανά μετά την αναβάθμιση).
-{: .notice--warning}
-
{% capture notice-1 %}
While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
@@ -40,11 +37,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
{: .notice--info}
* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### Instructions
@@ -55,8 +51,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card
1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card
1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
diff --git a/_pages/el_GR/bannerbomb3.txt b/_pages/el_GR/bannerbomb3.txt
index 30899e48c8..62b6888327 100644
--- a/_pages/el_GR/bannerbomb3.txt
+++ b/_pages/el_GR/bannerbomb3.txt
@@ -4,6 +4,9 @@ title: "BannerBomb3"
{% include toc title="Πίνακας περιεχομένων" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
diff --git a/_pages/el_GR/credits.txt b/_pages/el_GR/credits.txt
index a30aa906f9..96e5af50f6 100644
--- a/_pages/el_GR/credits.txt
+++ b/_pages/el_GR/credits.txt
@@ -2,6 +2,9 @@
title: "Συντελεστές"
---
+**Special thanks to Plailect, the original creator and maintainer of the guide!**
+{: .notice--primary}
+
**Ευχαριστώ ιδιαίτερα όλο το [#Cakey στο Freenode](http://webchat.freenode.net/?channels=%23Cakey) που ήταν υπέροχοι!**
{: .notice--primary}
@@ -22,7 +25,7 @@ title: "Συντελεστές"
+ Cartman123
+ Cell9
+ coder65535
- + Cruel`
+ + Cruel
+ d0k3
+ dank101
+ Dazzozo
@@ -35,6 +38,7 @@ title: "Συντελεστές"
+ erman1337
+ felipejfc
+ figgyc
+ + fox8091
+ Frozen_Chen
+ Gelex
+ Hamcha
@@ -46,12 +50,12 @@ title: "Συντελεστές"
+ jkcgs
+ kartik
+ LordBass
- + MassExplosion123
+ mid-kid
+ MrNbaYoh
+ Mrrraou
+ Night_Fallen_Wolf
+ Normmatt
+ + Plailect
+ plutooo
+ Psi-Hate
+ RandallHoffman
diff --git a/_pages/el_GR/dsidumper.txt b/_pages/el_GR/dsidumper.txt
index 38ce18513d..9762798a6c 100644
--- a/_pages/el_GR/dsidumper.txt
+++ b/_pages/el_GR/dsidumper.txt
@@ -2,36 +2,5 @@
title: "DSiDumper"
---
-{% include toc title="Πίνακας περιεχομένων" %}
-
-### Required Reading
-
-To dump system DSiWare, we use an existing homebrew launcher exploit.
-
-If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing
-
-### What You Need
-
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases)
-
-#### Section I - Prep Work
-
-1. Power off your device
-1. Εισάγετε την κάρτα SD στον υπολογιστή σας
-1. Copy your `movable.sed` file to the root of your SD card
-1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card
-1. Reinsert your SD card into your device
-1. Power on your device
-
-#### Section II - DSiWare Dumping
-
-1. Open the Homebrew Launcher using any method
-1. Launch DSiWare Dumper from the list of homebrew
- + This will dump a DSiWare application to SD root
- + It is normal to see several failures.
-1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide
-
-Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
-{: .notice--primary}
-
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
+{: .notice--warning}
diff --git a/_pages/el_GR/finalizing-setup.txt b/_pages/el_GR/finalizing-setup.txt
index 2975bc2e74..748f8dde29 100644
--- a/_pages/el_GR/finalizing-setup.txt
+++ b/_pages/el_GR/finalizing-setup.txt
@@ -8,7 +8,7 @@ title: "Finalizing Setup"
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-Σε αυτήν την περίπτωση, θα χρησιμοποιήσουμε το Luma3DS του χρήστη [AuroraWright](https://github.com/AuroraWright/) ώστε να εκκινήσουμε απευθείας μια επεξεργασμένη έκδοση της SysNAND, που μας επιτρέπει να παρακάμψουμε την ανάγκη για μια EmuNAND, απλοποιώντας έτσι την χρήση ενός χακαρισμένου 3DS και απελευθερώνοντας χώρο στην κάρτα SD.
+In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
Ταυτόχρονα, θα εγκαταστήσουμε προγράμματα όπως τα παρακάτω:
@@ -27,7 +27,7 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
-* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
+* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)*
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
@@ -177,7 +177,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the
{% capture notice-6 %}
If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card.
-If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac.
+If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/el_GR/formatting-sd-(linux).txt b/_pages/el_GR/formatting-sd-(linux).txt
new file mode 100644
index 0000000000..546b6e2036
--- /dev/null
+++ b/_pages/el_GR/formatting-sd-(linux).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Linux)"
+---
+
+{% include toc title="Πίνακας περιεχομένων" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+Αυτή η σελίδα είναι μόνο για χρήστες Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(Windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Instructions
+#### Section I - Determining which slot your SD card is in
+
+1. Make sure your SD card is **not** inserted
+1. Launch the Linux Terminal
+1. Type `watch "lsblk"`
+1. Insert your SD card into your PC
+1. Observe the output. It should match something like this:
+```
+NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+mmcblk0 179:0 0 3,8G 0 disk
+└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
+```
+1. Take note of the device mount point. In our example above, it was `mmcblk0`
+ + If `RO` is set to 1, make sure the lock switch is not slid down
+1. Hit CTRL + C to exit the menu
+
+#### Section II - Formatting the card
+
+![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png)
+
+1. Type in `sudo cfdisk /dev/(device mount point from above)`
+1. On each partition, hit `Delete`
+1. Create a new Primary partition that covers the size of your entire SD card
+ + This will create a new partition with the linux filetype
+1. Select type and take a look at the menu
+1. Find "W95 FAT32" and take note of the code on the left side of that text
+1. Press any key, then enter the code you took note of in the previous step
+1. Hit enter, then hit Quit
diff --git a/_pages/el_GR/formatting-sd-(mac).txt b/_pages/el_GR/formatting-sd-(mac).txt
new file mode 100644
index 0000000000..fed68156e2
--- /dev/null
+++ b/_pages/el_GR/formatting-sd-(mac).txt
@@ -0,0 +1,60 @@
+---
+title: "Formatting SD (Mac)"
+---
+
+{% include toc title="Πίνακας περιεχομένων" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+Αυτή η σελίδα είναι μόνο για χρήστες Mac. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages.
+
+### Instructions
+
+#### OS X El Capitan (10.11) and later
+
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. In the top-left "View" menu, choose "Show All Devices"
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Erase" at the top
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Ensure that "Scheme" is set to "Master Boot Record"
+ + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
+1. Click "Erase"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+#### OS X Yosemite (10.10) and earlier
+
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Partition" at the top
+ + If "Partition" does not appear, make sure to choose the device instead of a volume
+1. Ensure that "Partition Layout" is set to "1 Partition"
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Click "Options" below the partition table
+1. Choose "Master Boot Record"
+1. Click "OK"
+1. Click "Apply"
+1. Click "Partition"
+1. Wait for the format to finish
+1. Close Disk Utility
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
diff --git a/_pages/el_GR/formatting-sd-(windows).txt b/_pages/el_GR/formatting-sd-(windows).txt
new file mode 100644
index 0000000000..7459fd74c9
--- /dev/null
+++ b/_pages/el_GR/formatting-sd-(windows).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Windows)"
+---
+
+{% include toc title="Πίνακας περιεχομένων" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+Αυτή η σελίδα είναι μόνο για χρήστες Windows. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### What You Need
+
+* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)
+
+### Instructions
+
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run `guiformat.exe`
+1. Select your SD card's drive letter for "Drive"
+
+ Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Select a size for "Allocation unit size"
+ + If the SD card is 64GB or below, choose 32768
+ * If the SD card is above 64GB, choose 65536
+1. Enter anything for "Volume label"
+1. Ensure that "Quick Format" is selected
+1. Click "Start"
+1. Click "OK"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+### Common Errors
+
+* Failed to open device: GetLastError()=32
+ + Close everything that may be using the SD card, such as any File Explorer windows.
diff --git a/_pages/el_GR/get-started.txt b/_pages/el_GR/get-started.txt
index 7d2e11ba8f..6e5a36f9c6 100644
--- a/_pages/el_GR/get-started.txt
+++ b/_pages/el_GR/get-started.txt
@@ -6,7 +6,7 @@ title: "Get Started"
### Required Reading
-Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0.
+Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive.
Your device version can be found at the bottom right of the top screen of the System Settings.
@@ -60,19 +60,10 @@ We believe SpotPass and StreetPass are also safe for use at this time.
1.0.0 |
- 2.0.0 |
- Update to latest version or use an "All Versions" Method |
-
-
- 2.1.0 |
- 8.1.0 |
+ 11.3.0 |
Installing boot9strap (Soundhax) |
-
- 9.0.0 |
- 11.3.0 |
- Homebrew Launcher (Soundhax) |
-
+
11.4.0 |
11.13.0 |
Update to latest version or use an "All Versions" Method |
diff --git a/_pages/el_GR/home.txt b/_pages/el_GR/home.txt
index 9724d16734..5385771137 100644
--- a/_pages/el_GR/home.txt
+++ b/_pages/el_GR/home.txt
@@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ **Προτού ξεκινήσετε τον οδηγό, θα πρέπει να ξέρετε τους κινδύνους πίσω από το hacking του 3DS: ΚΑΘΕ φορά που τροποποιείτε το σύστημά σας, υπάρχει πάντα η πιθανότητα ΟΛΟΣΧΕΡΗΣ ΑΧΡΗΣΤΕΥΣΗΣ ΤΗΣ ΣΥΣΚΕΥΗΣ ΣΑΣ. Αυτό συμβαίνει σπάνια, όμως υπάρχει ακόμα η πιθανότητα γι΄αυτό βεβαιωθείτε ότι ακολουθείτε πιστά ΟΛΕΣ τις οδηγίες ΑΚΡΙΒΩΣ.**
+ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup).
-+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.14.0 or below.
++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0).
+ Εάν όλα πάνε σύμφωνα με το σχέδιο, δεν θα χάσετε τα δεδομένα σας και θα καταλήξετε με όλα όσα ξεκινήσατε (παιχνίδια, NNID, saves, κλπ. θα διατηρηθούν).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
-+ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). If your SD card is 64GB or larger, use an Allocation Unit Size of 64K (65536) instead.
++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/el_GR/homebrew-launcher-(pichaxx).txt b/_pages/el_GR/homebrew-launcher-(pichaxx).txt
index 792b0ee650..1ca1326154 100644
--- a/_pages/el_GR/homebrew-launcher-(pichaxx).txt
+++ b/_pages/el_GR/homebrew-launcher-(pichaxx).txt
@@ -4,6 +4,9 @@ title: "Homebrew Launcher (PicHaxx)"
{% include toc title="Πίνακας περιεχομένων" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
@@ -37,16 +40,17 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
1. Select your `movable.sed` file
1. Select "Build and Download"
1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
-1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card
+ Overwrite the old save file when prompted
1. Reinsert your SD card into your device
1. Power on your device
1. Launch "Pokemon Picross"
1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
+ + You may see an error stating there are no applications found
+1. Power off your device
___
diff --git a/_pages/el_GR/homebrew-launcher-(soundhax).txt b/_pages/el_GR/homebrew-launcher-(soundhax).txt
index 7cac7710ca..1ba6720ea5 100644
--- a/_pages/el_GR/homebrew-launcher-(soundhax).txt
+++ b/_pages/el_GR/homebrew-launcher-(soundhax).txt
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)*
### Instructions
diff --git a/_pages/el_GR/homebrew-launcher-(steelhax).txt b/_pages/el_GR/homebrew-launcher-(steelhax).txt
index 7671af852d..65ec1b9a69 100644
--- a/_pages/el_GR/homebrew-launcher-(steelhax).txt
+++ b/_pages/el_GR/homebrew-launcher-(steelhax).txt
@@ -2,62 +2,5 @@
title: "Homebrew Launcher (Steelhax)"
---
-{% include toc title="Πίνακας περιεχομένων" %}
-
-### Required Reading
-
-This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop.
-
-If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)).
-{: .notice--success}
-
-If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
{: .notice--warning}
-
-### What You Need
-
-* The free eShop game "Steel Diver: Sub Wars"
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip)
-* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)*
-
-### Instructions
-
-#### Section I - Prep Work
-
-1. Create a folder named `3ds` on the root of your SD card if it does not already exist
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card
-1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin`
-
-#### Section II - Steelminer
-
-1. Insert your SD card into your device
-1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
- + Decline the game update when prompted
- + If you have already updated the game, use the Data Management menu of the System Settings to delete the update
-1. Exit "Steel Diver: Sub Wars"
-1. Power off your device
-1. Εισάγετε την κάρτα SD στον υπολογιστή σας
-1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer
-1. Select your `movable.sed` file
-1. Select "Start!"
-1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card
- + **EUR Region**: `000d7e00`
- + **JPN Region**: `000d7c00`
- + **USA Region**: `000d7d00`
-1. Copy the new downloaded save file to the `data` folder on your SD card
- + Overwrite the old save file when prompted
-1. Reinsert your SD card into your device
-1. Power on your device
-1. Launch "Steel Diver: Sub Wars"
-1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
-
-___
-
-### Continue to [DSiWare Dumper](dsidumper)
-{: .notice--primary}
diff --git a/_pages/el_GR/installing-boot9strap-(fredtool).txt b/_pages/el_GR/installing-boot9strap-(fredtool).txt
index 5ec51d895c..15d0189542 100644
--- a/_pages/el_GR/installing-boot9strap-(fredtool).txt
+++ b/_pages/el_GR/installing-boot9strap-(fredtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)"
{% include toc title="Πίνακας περιεχομένων" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
@@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte
### What You Need
-* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper))
+* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3))
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
@@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte
#### Section II - Fredtool
-1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer
+1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer
1. Select your `movable.sed` file for the "Your movable.sed" field
1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field
1. Complete the "I'm not a robot" captcha
1. Select "Start"
1. Wait for the process to complete
1. When the process has completed, download your modified DSiWare archive from the site
- + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited)
+ + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited)
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + This `` folder will be another 32 letter/number folder inside the `` folder
- + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If the `Nintendo DSiWare` folder does not exist, create it inside of the ``
1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder
1. Reinsert your SD card into your device
1. Power on your device
@@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
-1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card
+1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/el_GR/installing-boot9strap-(frogtool).txt b/_pages/el_GR/installing-boot9strap-(frogtool).txt
index 9b221a9b34..9d991c6b07 100644
--- a/_pages/el_GR/installing-boot9strap-(frogtool).txt
+++ b/_pages/el_GR/installing-boot9strap-(frogtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)"
{% include toc title="Πίνακας περιεχομένων" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.
@@ -18,14 +21,14 @@ This is a currently working implementation of the "FIRM partitions known-plainte
* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce)
* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy your `movable.sed` file to the root of your SD card
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
1. Copy `frogcert.bin` to the root of your SD card
1. Reinsert your SD card into your device
@@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+#### Section V - Restoring DS Download Play
+
+1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+
___
### Continue to [Finalizing Setup](finalizing-setup)
diff --git a/_pages/el_GR/installing-boot9strap-(hardmod).txt b/_pages/el_GR/installing-boot9strap-(hardmod).txt
index ca7c629467..f9f326a739 100644
--- a/_pages/el_GR/installing-boot9strap-(hardmod).txt
+++ b/_pages/el_GR/installing-boot9strap-(hardmod).txt
@@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS |
diff --git a/_pages/el_GR/installing-boot9strap-(ntrboot).txt b/_pages/el_GR/installing-boot9strap-(ntrboot).txt
index f356ec6452..3a0b2f0d4d 100644
--- a/_pages/el_GR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/el_GR/installing-boot9strap-(ntrboot).txt
@@ -14,7 +14,7 @@ title: "Installing boot9strap (ntrboot)"
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/el_GR/installing-boot9strap-(soundhax).txt b/_pages/el_GR/installing-boot9strap-(soundhax).txt
index 4768e7ad74..3a97ef3a17 100644
--- a/_pages/el_GR/installing-boot9strap-(soundhax).txt
+++ b/_pages/el_GR/installing-boot9strap-(soundhax).txt
@@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)"
### Required Reading
-Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions.
-
-{% capture notice-1 %}
-
-Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions.
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
### Instructions
@@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint
1. Power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy the Soundhax `.m4a` to the root of your SD card
-1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin`
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.3dsx` to the root of your SD card
+1. Copy `otherapp.bin` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
-1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Reinsert your SD card into your device
1. Power on your device
@@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint
+ In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
1. Μεταβείτε στο `/SDCARD`, στην συνέχεια παίξτε το "<3 nedwill 2016"
+ Μπορεί να χρειαστούν αρκετές προσπάθειες
- + Εάν παγώσει, επιβάλλετε το κλείσιμο της κονσόλας κρατώντας πατημένο το κουμπί ενεργοποίησης και δοκιμάστε ξανά
+ + If it freezes, force the console to power off by holding the power button, then try again
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/el_GR/installing-boot9strap-(usm).txt b/_pages/el_GR/installing-boot9strap-(usm).txt
index 2f9122ce57..f9ca24888e 100644
--- a/_pages/el_GR/installing-boot9strap-(usm).txt
+++ b/_pages/el_GR/installing-boot9strap-(usm).txt
@@ -17,31 +17,32 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--danger}
+{: .notice--warning}
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release archive for [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
+1. If your device is powered on, power off your device
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
- + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
-1. If your console is powered on, power off your console
+ + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + If `Nintendo DSiWare` does not exist, create it
+1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If `Nintendo DSiWare` does not exist, create it inside of the ``
1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC
+ This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups
-1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder
+1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder
#### Section II - BannerBomb3
@@ -56,15 +57,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section III - unSAFE_MODE
-1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
- + Keep holding the buttons until the console boots into Safe Mode
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the device boots into Safe Mode
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
- + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+ + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
#### Section IV - Configuring Luma3DS
@@ -81,12 +82,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
1. Navigate to `Data Management` -> `DSiWare`
1. Click on the SD Card section
+ Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
-1. Power your system off
+1. Power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
-1. Continue to Finalizing Setup
___
diff --git a/_pages/el_GR/legacy-methods.txt b/_pages/el_GR/legacy-methods.txt
index e70576d0bb..f0294f28af 100644
--- a/_pages/el_GR/legacy-methods.txt
+++ b/_pages/el_GR/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
+For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/el_GR/region-changing.txt b/_pages/el_GR/region-changing.txt
index 1d16a4cab3..b74e753616 100644
--- a/_pages/el_GR/region-changing.txt
+++ b/_pages/el_GR/region-changing.txt
@@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
Αυτή η διαδικασία θα αποσυνδέσει το NNID σας από το σύστημα, καθώς δεν θα είναι πλέον συμβατό με αυτό. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
-After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. New 3DS τα οποία είχαν χρησιμοποιήσει το eShop στην αρχική περιοχή της συσκευής δεν μπορούν να δημιουργήσουν καινούργιο NNID και να αποκτήσουν πρόσβαση στο eShop στην καινούργια περιοχή!
+After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue.
{: .notice--warning}
Σημειώστε ότι σποραδικά το eShop δεν θα λειτουργεί, χωρίς λόγο, σε συσκευές στις οποίες θα έπρεπε. Έχει να κάνει αποκλειστικά με του διακομιστές της Nintendo και δεν μπορώ να έχω καθόλου έλεγχο, όσον αφορά αυτό το θέμα. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Η αιτία γι' αυτό είναι, προς το παρόν, άγνωστη.
@@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this.
1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
1. Reinsert your SD card into your device
-#### Section II - CTRTransfer
-
+#### Section II - NAND Backup
1. Launch GodMode9 by holding (Start) during boot
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
+ Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
+1. Press (Home) to bring up the action menu
+1. Select "Scripts..."
+1. Select "GM9Megascript"
+1. Select "Backup Options"
+1. Select "SysNAND Backup"
+1. Πατήστε (A) για επιβεβαίωση
+ + This process will take some time
+ + If you get an error, make sure that you have at least 1.3GB of free space on your SD card
+1. Πατήστε (A) για να συνεχίσετε
+1. Press (B) to return to the main menu
+1. Select "Exit"
+1. Press (A) to relock write permissions if prompted
+1. Κρατήστε πατημένο το (R) και πατήστε ταυτόχρονα το (B) για να αφαιρέσετε την κάρτα SD
+1. Εισάγετε την κάρτα SD στον υπολογιστή σας
+1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Make backups in multiple locations (such as online file storage)
+ + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
+1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+1. Reinsert your SD card into your device
+ + If your SD card was not detected, hold (R) and press (B) at the same time to remount it
+
+#### Section III - CTRTransfer
+
1. Navigate to `[0:] SDCARD` -> `gm9`
1. Press (A) on the CTRTransfer `.bin` to select it
1. Select "CTRNAND options..."
@@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
+ Updates while using B9S + Luma (what you have) are safe
+ Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
-#### Section III - Launching FBI
+#### Section IV - Launching FBI
1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})
1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu
@@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
1. Launch the Download Play application
1. Your device should load the Homebrew Launcher
-#### Section IV - Reinstalling Tickets
+#### Section V - Reinstalling Tickets
If script found no user tickets told you to skip this section, then skip this section
{: .notice--info}
@@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se
+ Press (B) to decline installing tickets from CDN.
1. Press (Home) to exit FBI
-#### Section V - Region settings
+#### Section VI - Region settings
1. Launch the System Settings
1. Μεταβείτε στο "Other Settings", "Profile" και έπειτα στο "Region Settings"
1. Επιλέξτε την χώρα της περιοχής από την οποία αλλάξατε
1. Εάν σας ζητηθεί, δεν είναι αναγκαίο να δηλώσετε πολιτεία
-#### Section VI - Remove CTRTransfer image
+#### Section VII - Remove CTRTransfer image
1. Launch GodMode9 by holding (Start) during boot
1. Navigate to `[0:] SDCARD` -> `gm9`
diff --git a/_pages/el_GR/seedminer.txt b/_pages/el_GR/seedminer.txt
index 0fb96bc549..a5f213b21d 100644
--- a/_pages/el_GR/seedminer.txt
+++ b/_pages/el_GR/seedminer.txt
@@ -35,7 +35,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
+ This folder name is also known as your "ID0"
1. Power on your device
1. Μεταβείτε στο Friend List (το [πορτοκαλί πρόσωπο]({{ "/images/friend-list-icon.png" | absolute_url }}) στην πάνω σειρά του Home Menu)
- + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
+ + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
#### Section II - Seedminer
@@ -48,14 +48,14 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
1. Select "Go"
- + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section.
+ + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section
1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console
1. Wait for the site to update
+ If it does not, wait a few minutes before refreshing the page once
1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button
1. Wait for the remainder of the process to complete
- + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour.
- + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue.
+ + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour
+ + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
+ If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. When the process has completed, download your `movable.sed` file from the site
+ Keep this file as you will need it in the upcoming pages
@@ -66,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions except CHN and TWN.
+This method is compatible with all regions except CHN and TWN, and requires working shoulder buttons.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/el_GR/site-navigation.txt b/_pages/el_GR/site-navigation.txt
index 2de32f7b58..9a8e083a45 100644
--- a/_pages/el_GR/site-navigation.txt
+++ b/_pages/el_GR/site-navigation.txt
@@ -8,7 +8,7 @@ sitemap: false
**Δημοφιλή**
+ [Finalizing Setup](finalizing-setup)
-+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,7 +21,6 @@ sitemap: false
+ [Cartridge Update](cart-update)
+ [Ευχαριστίες](credits)
+ [CTRTransfer](ctrtransfer)
-+ [DSiWare Dumper](dsidumper)
+ [Δωρεές](donations)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -32,6 +31,9 @@ sitemap: false
+ [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system))
+ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi))
+ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds))
++ [Formatting SD (Linux)](formatting-sd-(linux))
++ [Formatting SD (Mac)](formatting-sd-(mac))
++ [Formatting SD (Windows)](formatting-sd-(windows))
+ [Ας αρχίσουμε](get-started)
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
@@ -39,23 +41,22 @@ sitemap: false
+ [Homebrew Launcher (Εναλλακτικές)](homebrew-launcher-(alternatives))
+ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx))
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax))
+ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa))
+ [Installing boot9strap (Browser)](installing-boot9strap-(browser))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Installing boot9strap (MSET)](installing-boot9strap-(mset))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
-+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
++ [Installing boot9strap (USM)](installing-boot9strap-(usm))
++ [Legacy Methods](legacy-methods)
+ [Μετακίνηση της EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Αλλαγή Περιοχής](region-changing)
+ [Seedminer](seedminer)
-+ [Legacy Seedminer Methods](legacy-methods)
+ [Αντιμετώπιση Προβλημάτων](troubleshooting)
+ [Uninstall CFW](uninstall-cfw)
+ [Updating B9S](updating-b9s)
diff --git a/_pages/el_GR/updating-b9s.txt b/_pages/el_GR/updating-b9s.txt
index dc464d37e9..cd27dad32c 100644
--- a/_pages/el_GR/updating-b9s.txt
+++ b/_pages/el_GR/updating-b9s.txt
@@ -26,8 +26,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
@@ -37,7 +36,6 @@ For all steps in this section, overwrite any existing files on your SD card.
{: .notice--info}
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
-1. Copy `boot.3dsx` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
@@ -56,7 +54,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert your SD card into your device
1. Power on your device
diff --git a/_pages/en_PT/a9lh-to-b9s.txt b/_pages/en_PT/a9lh-to-b9s.txt
index b1012f4872..4cce97bd05 100644
--- a/_pages/en_PT/a9lh-to-b9s.txt
+++ b/_pages/en_PT/a9lh-to-b9s.txt
@@ -14,9 +14,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/).
-If ye have set a PIN on Luma3DS, ye gunna be needin' to disable ye PIN temporarily, or else SafeB9SInstaller gunna give ye th' error "OTP Crypto Fail." Ye can re-enable th' PIN after th' update.
-{: .notice--warning}
-
{% capture notice-1 %}
While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
@@ -40,11 +37,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
{: .notice--info}
* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### Instructions
@@ -55,8 +51,7 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
1. Power off ye device
1. Insert ye SD card into ye computer
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card
1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card
1. Delete any existin' `.bin` payloads in th' `/luma/payloads/` folder on ye SD card, as they gunna be incompatible wit' boot9strap Luma3DS versions
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
diff --git a/_pages/en_PT/bannerbomb3.txt b/_pages/en_PT/bannerbomb3.txt
index b2fcdddeda..d8a16031d1 100644
--- a/_pages/en_PT/bannerbomb3.txt
+++ b/_pages/en_PT/bannerbomb3.txt
@@ -4,6 +4,9 @@ title: "BannerBomb3"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
diff --git a/_pages/en_PT/credits.txt b/_pages/en_PT/credits.txt
index 0ecfafb56f..8f728e4a36 100644
--- a/_pages/en_PT/credits.txt
+++ b/_pages/en_PT/credits.txt
@@ -2,6 +2,9 @@
title: "Credits"
---
+**Special thanks to Plailect, the original creator and maintainer of the guide!**
+{: .notice--primary}
+
**Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!**
{: .notice--primary}
@@ -22,7 +25,7 @@ If I forgot ye here, be contactin' me 'n I gunna be addin' ye name.
+ Cartman123
+ Cell9
+ coder65535
- + Cruel`
+ + Cruel
+ d0k3
+ dank101
+ Dazzozo
@@ -35,6 +38,7 @@ If I forgot ye here, be contactin' me 'n I gunna be addin' ye name.
+ erman1337
+ felipejfc
+ figgyc
+ + fox8091
+ Frozen_Chen
+ Gelex
+ Hamcha
@@ -46,12 +50,12 @@ If I forgot ye here, be contactin' me 'n I gunna be addin' ye name.
+ jkcgs
+ kartik
+ LordBass
- + MassExplosion123
+ mid-kid
+ MrNbaYoh
+ Mrrraou
+ Night_Fallen_Wolf
+ Normmatt
+ + Plailect
+ plutooo
+ Psi-Hate
+ RandallHoffman
diff --git a/_pages/en_PT/dsidumper.txt b/_pages/en_PT/dsidumper.txt
index e59b211350..9762798a6c 100644
--- a/_pages/en_PT/dsidumper.txt
+++ b/_pages/en_PT/dsidumper.txt
@@ -2,36 +2,5 @@
title: "DSiDumper"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-To dump system DSiWare, we use an existing homebrew launcher exploit.
-
-If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing
-
-### What You Need
-
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases)
-
-#### Section I - Prep Work
-
-1. Power off ye device
-1. Insert ye SD card into ye computer
-1. Copy your `movable.sed` file to the root of your SD card
-1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card
-1. Reinsert ye SD card into ye device
-1. Power on your device
-
-#### Section II - DSiWare Dumping
-
-1. Open the Homebrew Launcher using any method
-1. Launch DSiWare Dumper from the list of homebrew
- + This will dump a DSiWare application to SD root
- + It is normal to see several failures.
-1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide
-
-Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
-{: .notice--primary}
-
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
+{: .notice--warning}
diff --git a/_pages/en_PT/finalizing-setup.txt b/_pages/en_PT/finalizing-setup.txt
index 5f2381ddb2..aefe5985e9 100644
--- a/_pages/en_PT/finalizing-setup.txt
+++ b/_pages/en_PT/finalizing-setup.txt
@@ -8,7 +8,7 @@ title: "Finalizin' Setup"
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
+In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
Durin' 'tis process, we also setup programs such as th' followin':
@@ -27,7 +27,7 @@ Durin' 'tis process, we also setup programs such as th' followin':
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
-* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
+* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)*
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
@@ -177,7 +177,7 @@ Ye can now be pressin' (L) + (Down) + (Select) while ye device be booted up to o
{% capture notice-6 %}
If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card.
-If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac.
+If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/en_PT/formatting-sd-(linux).txt b/_pages/en_PT/formatting-sd-(linux).txt
new file mode 100644
index 0000000000..4032201938
--- /dev/null
+++ b/_pages/en_PT/formatting-sd-(linux).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Linux)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+'Tis page be fer Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(Windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Instructions
+#### Section I - Determining which slot your SD card is in
+
+1. Make sure your SD card is **not** inserted
+1. Launch the Linux Terminal
+1. Type `watch "lsblk"`
+1. Insert your SD card into your PC
+1. Observe the output. It should match something like this:
+```
+NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+mmcblk0 179:0 0 3,8G 0 disk
+└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
+```
+1. Take note of the device mount point. In our example above, it was `mmcblk0`
+ + If `RO` is set to 1, make sure the lock switch is not slid down
+1. Hit CTRL + C to exit the menu
+
+#### Section II - Formatting the card
+
+![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png)
+
+1. Type in `sudo cfdisk /dev/(device mount point from above)`
+1. On each partition, hit `Delete`
+1. Create a new Primary partition that covers the size of your entire SD card
+ + This will create a new partition with the linux filetype
+1. Select type and take a look at the menu
+1. Find "W95 FAT32" and take note of the code on the left side of that text
+1. Press any key, then enter the code you took note of in the previous step
+1. Hit enter, then hit Quit
diff --git a/_pages/en_PT/formatting-sd-(mac).txt b/_pages/en_PT/formatting-sd-(mac).txt
new file mode 100644
index 0000000000..58d92032c8
--- /dev/null
+++ b/_pages/en_PT/formatting-sd-(mac).txt
@@ -0,0 +1,60 @@
+---
+title: "Formatting SD (Mac)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+'Tis page be fer Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages.
+
+### Instructions
+
+#### OS X El Capitan (10.11) and later
+
+1. Insert ye SD card into ye computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. In the top-left "View" menu, choose "Show All Devices"
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Erase" at the top
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Ensure that "Scheme" is set to "Master Boot Record"
+ + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
+1. Click "Erase"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+#### OS X Yosemite (10.10) and earlier
+
+1. Insert ye SD card into ye computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Partition" at the top
+ + If "Partition" does not appear, make sure to choose the device instead of a volume
+1. Ensure that "Partition Layout" is set to "1 Partition"
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Click "Options" below the partition table
+1. Choose "Master Boot Record"
+1. Click "OK"
+1. Click "Apply"
+1. Click "Partition"
+1. Wait for the format to finish
+1. Close Disk Utility
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
diff --git a/_pages/en_PT/formatting-sd-(windows).txt b/_pages/en_PT/formatting-sd-(windows).txt
new file mode 100644
index 0000000000..0131931896
--- /dev/null
+++ b/_pages/en_PT/formatting-sd-(windows).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Windows)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+'Tis page be fer Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### What You Need
+
+* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)
+
+### Instructions
+
+1. Insert ye SD card into ye computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run `guiformat.exe`
+1. Select your SD card's drive letter for "Drive"
+
+ Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Select a size for "Allocation unit size"
+ + If the SD card is 64GB or below, choose 32768
+ * If the SD card is above 64GB, choose 65536
+1. Enter anything for "Volume label"
+1. Ensure that "Quick Format" is selected
+1. Click "Start"
+1. Click "OK"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+### Common Errors
+
+* Failed to open device: GetLastError()=32
+ + Close everything that may be using the SD card, such as any File Explorer windows.
diff --git a/_pages/en_PT/get-started.txt b/_pages/en_PT/get-started.txt
index 23c57aa3a4..3b2b52641d 100644
--- a/_pages/en_PT/get-started.txt
+++ b/_pages/en_PT/get-started.txt
@@ -6,7 +6,7 @@ title: "Get Started"
### Required Reading
-Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive. 'Tis means that, fer example, th' "from 9.0.0 to 9.2.0" row be includin' 9.0.0, 9.1.0, 'n 9.2.0.
+Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive.
Ye device version can be found at th' bottom right 'o th' top screen 'o th' System Settin's.
@@ -60,19 +60,10 @@ We believe SpotPass and StreetPass are also safe for use at this time.
1.0.0 |
- 2.0.0 |
- Update to latest version or use an "All Versions" Method |
-
-
- 2.1.0 |
- 8.1.0 |
+ 11.3.0 |
Installing boot9strap (Soundhax) |
-
- 9.0.0 |
- 11.3.0 |
- Homebrew Launcher (Soundhax) |
-
+
11.4.0 |
11.13.0 |
Update to latest version or use an "All Versions" Method |
diff --git a/_pages/en_PT/home.txt b/_pages/en_PT/home.txt
index d421e448ac..96202328ae 100644
--- a/_pages/en_PT/home.txt
+++ b/_pages/en_PT/home.txt
@@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ **Before beginnin' th' guide, ye must be knowin' th' risks 'o 3DS hackin': EVERY time ye be modifyin' ye system, there be always th' potential fer an UNRECOVERABLE brick. They be rare, but still a possibility so make sure ye follow ALL directions EXACTLY.**
+ If ye have already hacked ye 3DS before to get an EmuNAND setup, 'n would like to move th' contents 'o ye previous EmuNAND to ye new SysNAND CFW, ye should follow all instructions 'n be restorin' ye existin' EmuNAND when prompted once ye reach [Finalizin' Setup](finalizing-setup).
-+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.14.0 or below.
++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0).
+ If everythin' goes accordin' to plan, ye gunna lose no data 'n be endin' up wit' everythin' that ye started wit' (games, NNID, saves, etc gunna be preserved).
+ Keep ye device plugged in 'n charged throughout th' entire process to avoid data loss or damage from an unexpected power-off!
+ Ye SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (th' SD card that comes wit' ye device gunna be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
-+ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). If your SD card is 64GB or larger, use an Allocation Unit Size of 64K (65536) instead.
++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/en_PT/homebrew-launcher-(pichaxx).txt b/_pages/en_PT/homebrew-launcher-(pichaxx).txt
index 2baa71c46c..14ab604430 100644
--- a/_pages/en_PT/homebrew-launcher-(pichaxx).txt
+++ b/_pages/en_PT/homebrew-launcher-(pichaxx).txt
@@ -4,6 +4,9 @@ title: "Homebrew Launcher (PicHaxx)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
@@ -37,16 +40,17 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
1. Select your `movable.sed` file
1. Select "Build and Download"
1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
-1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card
+ Overwrite the old save file when prompted
1. Reinsert ye SD card into ye device
1. Power on your device
1. Launch "Pokemon Picross"
1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
+ + You may see an error stating there are no applications found
+1. Power off ye device
___
diff --git a/_pages/en_PT/homebrew-launcher-(soundhax).txt b/_pages/en_PT/homebrew-launcher-(soundhax).txt
index 5fb215fb83..c041460ba4 100644
--- a/_pages/en_PT/homebrew-launcher-(soundhax).txt
+++ b/_pages/en_PT/homebrew-launcher-(soundhax).txt
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)*
### Instructions
diff --git a/_pages/en_PT/homebrew-launcher-(steelhax).txt b/_pages/en_PT/homebrew-launcher-(steelhax).txt
index 0551527e45..65ec1b9a69 100644
--- a/_pages/en_PT/homebrew-launcher-(steelhax).txt
+++ b/_pages/en_PT/homebrew-launcher-(steelhax).txt
@@ -2,62 +2,5 @@
title: "Homebrew Launcher (Steelhax)"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop.
-
-If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)).
-{: .notice--success}
-
-If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
{: .notice--warning}
-
-### What You Need
-
-* The free eShop game "Steel Diver: Sub Wars"
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip)
-* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)*
-
-### Instructions
-
-#### Section I - Prep Work
-
-1. Create a folder named `3ds` on the root of your SD card if it does not already exist
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card
-1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin`
-
-#### Section II - Steelminer
-
-1. Insert your SD card into your device
-1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
- + Decline the game update when prompted
- + If you have already updated the game, use the Data Management menu of the System Settings to delete the update
-1. Exit "Steel Diver: Sub Wars"
-1. Power off ye device
-1. Insert ye SD card into ye computer
-1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer
-1. Select your `movable.sed` file
-1. Select "Start!"
-1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card
- + **EUR Region**: `000d7e00`
- + **JPN Region**: `000d7c00`
- + **USA Region**: `000d7d00`
-1. Copy the new downloaded save file to the `data` folder on your SD card
- + Overwrite the old save file when prompted
-1. Reinsert ye SD card into ye device
-1. Power on your device
-1. Launch "Steel Diver: Sub Wars"
-1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
-
-___
-
-### Continue to [DSiWare Dumper](dsidumper)
-{: .notice--primary}
diff --git a/_pages/en_PT/installing-boot9strap-(fredtool).txt b/_pages/en_PT/installing-boot9strap-(fredtool).txt
index b9e596f2d9..9a2992ae89 100644
--- a/_pages/en_PT/installing-boot9strap-(fredtool).txt
+++ b/_pages/en_PT/installing-boot9strap-(fredtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
@@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte
### What You Need
-* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper))
+* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3))
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
@@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte
#### Section II - Fredtool
-1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer
+1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer
1. Select your `movable.sed` file for the "Your movable.sed" field
1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field
1. Complete the "I'm not a robot" captcha
1. Select "Start"
1. Wait for the process to complete
1. When the process has completed, download your modified DSiWare archive from the site
- + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited)
+ + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited)
1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + This `` folder will be another 32 letter/number folder inside the `` folder
- + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If the `Nintendo DSiWare` folder does not exist, create it inside of the ``
1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder
1. Reinsert ye SD card into ye device
1. Power on your device
@@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Power off ye device
1. Insert ye SD card into ye computer
-1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card
+1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card
+ Replace the existing `42383841.bin` file
1. Reinsert ye SD card into ye device
1. Power on your device
diff --git a/_pages/en_PT/installing-boot9strap-(frogtool).txt b/_pages/en_PT/installing-boot9strap-(frogtool).txt
index ad4a60a8a6..16a77dc088 100644
--- a/_pages/en_PT/installing-boot9strap-(frogtool).txt
+++ b/_pages/en_PT/installing-boot9strap-(frogtool).txt
@@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.
@@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce)
* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
1. Insert ye SD card into ye computer
1. Copy your `movable.sed` file to the root of your SD card
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card
+1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
1. Copy `frogcert.bin` to the root of your SD card
1. Reinsert ye SD card into ye device
@@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http
1. Press (Start) to save 'n reboot
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+#### Section V - Restoring DS Download Play
+
+1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Ye device should be loadin' th' Homebrew Launcher
+1. Launch Frogtool from the list of homebrew
+1. Select the "RESTORE patched DS Download Play" option
+1. Once this operation has finished, read the screens and check if the process was successful
+ + If there are any errors or missing files, correct the problem and try again
+1. If the process was successful, tap the touch screen, then press START to exit
+
___
### Continue to [Finalizing Setup](finalizing-setup)
diff --git a/_pages/en_PT/installing-boot9strap-(hardmod).txt b/_pages/en_PT/installing-boot9strap-(hardmod).txt
index 642a6d6d8a..f37e246481 100644
--- a/_pages/en_PT/installing-boot9strap-(hardmod).txt
+++ b/_pages/en_PT/installing-boot9strap-(hardmod).txt
@@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The `.firm` corresponding to your device and version:
| Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS |
diff --git a/_pages/en_PT/installing-boot9strap-(ntrboot).txt b/_pages/en_PT/installing-boot9strap-(ntrboot).txt
index cc467beeaa..ab85912733 100644
--- a/_pages/en_PT/installing-boot9strap-(ntrboot).txt
+++ b/_pages/en_PT/installing-boot9strap-(ntrboot).txt
@@ -14,7 +14,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Ye ntrboot-flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/en_PT/installing-boot9strap-(soundhax).txt b/_pages/en_PT/installing-boot9strap-(soundhax).txt
index 93811d1a34..7ef952c2c3 100644
--- a/_pages/en_PT/installing-boot9strap-(soundhax).txt
+++ b/_pages/en_PT/installing-boot9strap-(soundhax).txt
@@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)"
### Required Reading
-Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions.
-
-{% capture notice-1 %}
-
-Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop.
-
-This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))!
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions.
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
### Instructions
@@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint
1. Power off ye device
1. Insert ye SD card into ye computer
1. Copy the Soundhax `.m4a` to the root of your SD card
-1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin`
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
-1. Copy `boot.3dsx` to the root of your SD card
+1. Copy `otherapp.bin` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
1. Create a folder named `boot9strap` on th' root 'o ye SD card
1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card
-1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Reinsert ye SD card into ye device
1. Power on your device
@@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint
+ In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
- + If it freezes, just force the console to power off by holding the power button, then try again
+ + If it freezes, force the console to power off by holding the power button, then try again
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/en_PT/installing-boot9strap-(usm).txt b/_pages/en_PT/installing-boot9strap-(usm).txt
index a864602956..0407a2e04d 100644
--- a/_pages/en_PT/installing-boot9strap-(usm).txt
+++ b/_pages/en_PT/installing-boot9strap-(usm).txt
@@ -17,31 +17,32 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
-{: .notice--danger}
+{: .notice--warning}
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release archive for [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work
+1. If your device is powered on, power off your device
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
- + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
-1. If your console is powered on, power off your console
+ + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
1. Insert ye SD card into ye computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
- + If `Nintendo DSiWare` does not exist, create it
+1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+ + If `Nintendo DSiWare` does not exist, create it inside of the ``
1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC
+ This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups
-1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder
+1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder
#### Section II - BannerBomb3
@@ -56,15 +57,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section III - unSAFE_MODE
-1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
- + Keep holding the buttons until the console boots into Safe Mode
+1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the device boots into Safe Mode
1. Press "OK" to accept the update
+ There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
- + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+ + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
#### Section IV - Configuring Luma3DS
@@ -81,12 +82,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
1. Navigate to `Data Management` -> `DSiWare`
1. Click on the SD Card section
+ Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
-1. Power your system off
+1. Power off ye device
1. Insert ye SD card into ye computer
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
-1. Continue to Finalizing Setup
___
diff --git a/_pages/en_PT/legacy-methods.txt b/_pages/en_PT/legacy-methods.txt
index 987a3ccfc9..b9da394c9c 100644
--- a/_pages/en_PT/legacy-methods.txt
+++ b/_pages/en_PT/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
+For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/en_PT/region-changing.txt b/_pages/en_PT/region-changing.txt
index 43869d4eef..c8e004c6da 100644
--- a/_pages/en_PT/region-changing.txt
+++ b/_pages/en_PT/region-changing.txt
@@ -17,7 +17,7 @@ Note that if ye have any payload files other than `GodMode9.firm` in th' `/luma/
This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt).
{: .notice--warning}
-After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region!
+After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue.
{: .notice--warning}
Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown.
@@ -55,12 +55,34 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis.
1. Copy `FBI.3dsx` to th' `/3ds/` folder on ye SD card
1. Reinsert ye SD card into ye device
-#### Section II - CTRTransfer
-
+#### Section II - NAND Backup
1. Launch GodMode9 by holdin' (Start) durin' boot
1. If ye be prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
1. If ye be prompted to fix th' RTC date&time, press (A) to do so, then set th' date 'n time, then press (A) to continue
+ Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide
+1. Press (Home) to bring up th' action menu
+1. Select "Scripts..."
+1. Select "GM9Megascript"
+1. Select "Backup Options"
+1. Select "SysNAND Backup"
+1. Press (A) to confirm
+ + 'Tis process gunna be takin' some time
+ + If you get an error, make sure that you have at least 1.3GB of free space on your SD card
+1. Press (A) to continue
+1. Press (B) to return to the main menu
+1. Select "Exit"
+1. Press (A) to relock write permissions if prompted
+1. Hold (R) and press (B) at the same time to eject your SD card
+1. Insert ye SD card into ye computer
+1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
+ + Make backups in multiple locations (such as online file storage)
+ + These backups gunna be savin' ye from any brick, 'n they may help ye recover files, especially th' NAND image, if anythin' be off or wrong in th' future
+1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
+1. Reinsert ye SD card into ye device
+ + If your SD card was not detected, hold (R) and press (B) at the same time to remount it
+
+#### Section III - CTRTransfer
+
1. Navigate to `[0:] SDCARD` -> `gm9`
1. Press (A) on th' CTRTransfer `.bin` to select it
1. Select "CTRNAND options..."
@@ -87,7 +109,7 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis.
+ Updates while usin' B9S + Luma (what ye have) be safe
+ If 'tis gives ye an error, set ye DNS settin's to "auto"
-#### Section III - Launchin' FBI
+#### Section IV - Launching FBI
1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }})
1. Press (L) + (Down) + (Select) at th' same time to be openin' th' Rosalina menu
@@ -100,7 +122,7 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis.
1. Launch th' Download Play application
1. Ye device should be loadin' th' Homebrew Launcher
-#### Section IV - Reinstallin' Tickets
+#### Section V - Reinstalling Tickets
If th' script found no user tickets 'n told ye to skip 'tis section, then skip 'tis section
{: .notice--info}
@@ -120,14 +142,14 @@ If th' script found no user tickets 'n told ye to skip 'tis section, then skip '
+ Press (B) to decline installin' tickets from CDN.
1. Press (Home) to exit FBI
-#### Section V - Region settings
+#### Section VI - Region settings
1. Launch the System Settings
1. Go to "Other Settings", "Profile", then "Region Settings"
1. Select a country from the region you switched to
1. If prompted, you do not need to set a state
-#### Section VI - Remove CTRTransfer image
+#### Section VII - Remove CTRTransfer image
1. Launch GodMode9 by holdin' (Start) durin' boot
1. Navigate to `[0:] SDCARD` -> `gm9`
diff --git a/_pages/en_PT/seedminer.txt b/_pages/en_PT/seedminer.txt
index 58b840f5f4..1dddc1ed4c 100644
--- a/_pages/en_PT/seedminer.txt
+++ b/_pages/en_PT/seedminer.txt
@@ -35,7 +35,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
+ This folder name is also known as your "ID0"
1. Power on your device
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
+ + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
#### Section II - Seedminer
@@ -48,14 +48,14 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
1. Select "Go"
- + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section.
+ + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section
1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console
1. Wait for the site to update
+ If it does not, wait a few minutes before refreshing the page once
1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button
1. Wait for the remainder of the process to complete
- + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour.
- + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue.
+ + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour
+ + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
+ If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. When the process has completed, download your `movable.sed` file from the site
+ Keep this file as you will need it in the upcoming pages
@@ -66,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions except CHN and TWN.
+This method is compatible with all regions except CHN and TWN, and requires working shoulder buttons.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/en_PT/site-navigation.txt b/_pages/en_PT/site-navigation.txt
index acd13edc6b..d8bbc5fd31 100644
--- a/_pages/en_PT/site-navigation.txt
+++ b/_pages/en_PT/site-navigation.txt
@@ -8,7 +8,7 @@ sitemap: false
**Popular**
+ [Finalizin' Setup](finalizing-setup)
-+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,7 +21,6 @@ sitemap: false
+ [Cartridge Update](cart-update)
+ [Credits](credits)
+ [CTRTransfer](ctrtransfer)
-+ [DSiWare Dumper](dsidumper)
+ [Gimme Ye Gold](donations)
+ [F3 (Linux)](f3-(linux))
+ [F3X (Mac)](f3x-(mac))
@@ -32,6 +31,9 @@ sitemap: false
+ [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system))
+ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi))
+ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds))
++ [Formatting SD (Linux)](formatting-sd-(linux))
++ [Formatting SD (Mac)](formatting-sd-(mac))
++ [Formatting SD (Windows)](formatting-sd-(windows))
+ [Get Started](get-started)
+ [GodMode9 Usage](godmode9-usage)
+ [H2testw (Windows)](h2testw-(windows))
@@ -39,23 +41,22 @@ sitemap: false
+ [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives))
+ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx))
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax))
+ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa))
+ [Installin' boot9strap (Browser)](installing-boot9strap-(browser))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installin' boot9strap (Hardmod)](installing-boot9strap-(hardmod))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Installin' boot9strap (MSET)](installing-boot9strap-(mset))
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
-+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
++ [Installing boot9strap (USM)](installing-boot9strap-(usm))
++ [Legacy Methods](legacy-methods)
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changin'](region-changing)
+ [Seedminer](seedminer)
-+ [Legacy Seedminer Methods](legacy-methods)
+ [Troubleshootin'](troubleshooting)
+ [Uninstall CFW](uninstall-cfw)
+ [Updatin' B9S](updating-b9s)
diff --git a/_pages/en_PT/updating-b9s.txt b/_pages/en_PT/updating-b9s.txt
index 3bc34cd099..494fb85ef0 100644
--- a/_pages/en_PT/updating-b9s.txt
+++ b/_pages/en_PT/updating-b9s.txt
@@ -26,8 +26,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
@@ -37,7 +36,6 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
{: .notice--info}
1. Insert ye SD card into ye computer
-1. Copy `boot.3dsx` to the root of your SD card
1. Create a folder named `boot9strap` on th' root 'o ye SD card
1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card
1. Copy `SafeB9SInstaller.firm` from th' SafeB9SInstaller `.zip` to th' `/luma/payloads/` folder on ye SD card
@@ -56,7 +54,7 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
1. Power off ye device
1. Insert ye SD card into ye computer
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
1. Reinsert ye SD card into ye device
1. Power on your device
diff --git a/_pages/en_US/a9lh-to-b9s.txt b/_pages/en_US/a9lh-to-b9s.txt
index d2e59ef26a..5690806fa9 100644
--- a/_pages/en_US/a9lh-to-b9s.txt
+++ b/_pages/en_US/a9lh-to-b9s.txt
@@ -14,9 +14,6 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/).
-If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update).
-{: .notice--warning}
-
{% capture notice-1 %}
While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
@@ -40,11 +37,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
{: .notice--info}
* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### Instructions
@@ -55,8 +51,7 @@ For all steps in this section, overwrite any existing files on your SD card.
1. Power off your device
1. Insert your SD card into your computer
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card
+1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card
1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card
1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
diff --git a/_pages/en_US/bannerbomb3.txt b/_pages/en_US/bannerbomb3.txt
index 590a26735e..efc7f4e064 100644
--- a/_pages/en_US/bannerbomb3.txt
+++ b/_pages/en_US/bannerbomb3.txt
@@ -4,6 +4,9 @@ title: "BannerBomb3"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
diff --git a/_pages/en_US/credits.txt b/_pages/en_US/credits.txt
index e66f591db9..c30986407b 100644
--- a/_pages/en_US/credits.txt
+++ b/_pages/en_US/credits.txt
@@ -2,6 +2,9 @@
title: "Credits"
---
+**Special thanks to Plailect, the original creator and maintainer of the guide!**
+{: .notice--primary}
+
**Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!**
{: .notice--primary}
@@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name.
+ Cartman123
+ Cell9
+ coder65535
- + Cruel`
+ + Cruel
+ d0k3
+ dank101
+ Dazzozo
@@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name.
+ erman1337
+ felipejfc
+ figgyc
+ + fox8091
+ Frozen_Chen
+ Gelex
+ Hamcha
@@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name.
+ jkcgs
+ kartik
+ LordBass
- + MassExplosion123
+ mid-kid
+ MrNbaYoh
+ Mrrraou
+ Night_Fallen_Wolf
+ Normmatt
+ + Plailect
+ plutooo
+ Psi-Hate
+ RandallHoffman
diff --git a/_pages/en_US/dsidumper.txt b/_pages/en_US/dsidumper.txt
index 034e18f5cc..9762798a6c 100644
--- a/_pages/en_US/dsidumper.txt
+++ b/_pages/en_US/dsidumper.txt
@@ -2,36 +2,5 @@
title: "DSiDumper"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-To dump system DSiWare, we use an existing homebrew launcher exploit.
-
-If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing
-
-### What You Need
-
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases)
-
-#### Section I - Prep Work
-
-1. Power off your device
-1. Insert your SD card into your computer
-1. Copy your `movable.sed` file to the root of your SD card
-1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card
-1. Reinsert your SD card into your device
-1. Power on your device
-
-#### Section II - DSiWare Dumping
-
-1. Open the Homebrew Launcher using any method
-1. Launch DSiWare Dumper from the list of homebrew
- + This will dump a DSiWare application to SD root
- + It is normal to see several failures.
-1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide
-
-Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
-{: .notice--primary}
-
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
+{: .notice--warning}
diff --git a/_pages/en_US/finalizing-setup.txt b/_pages/en_US/finalizing-setup.txt
index 90f49a797f..2263b67b8b 100644
--- a/_pages/en_US/finalizing-setup.txt
+++ b/_pages/en_US/finalizing-setup.txt
@@ -8,7 +8,7 @@ title: "Finalizing Setup"
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
-In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
+In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
During this process, we also setup programs such as the following:
@@ -27,7 +27,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
-* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
+* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)*
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
@@ -177,7 +177,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the
{% capture notice-6 %}
If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card.
-If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac.
+If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/en_US/formatting-sd-(linux).txt b/_pages/en_US/formatting-sd-(linux).txt
new file mode 100644
index 0000000000..62d686163c
--- /dev/null
+++ b/_pages/en_US/formatting-sd-(linux).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Linux)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(Windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Instructions
+#### Section I - Determining which slot your SD card is in
+
+1. Make sure your SD card is **not** inserted
+1. Launch the Linux Terminal
+1. Type `watch "lsblk"`
+1. Insert your SD card into your PC
+1. Observe the output. It should match something like this:
+```
+NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+mmcblk0 179:0 0 3,8G 0 disk
+└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
+```
+1. Take note of the device mount point. In our example above, it was `mmcblk0`
+ + If `RO` is set to 1, make sure the lock switch is not slid down
+1. Hit CTRL + C to exit the menu
+
+#### Section II - Formatting the card
+
+![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png)
+
+1. Type in `sudo cfdisk /dev/(device mount point from above)`
+1. On each partition, hit `Delete`
+1. Create a new Primary partition that covers the size of your entire SD card
+ + This will create a new partition with the linux filetype
+1. Select type and take a look at the menu
+1. Find "W95 FAT32" and take note of the code on the left side of that text
+1. Press any key, then enter the code you took note of in the previous step
+1. Hit enter, then hit Quit
diff --git a/_pages/en_US/formatting-sd-(mac).txt b/_pages/en_US/formatting-sd-(mac).txt
new file mode 100644
index 0000000000..c9c0ebf791
--- /dev/null
+++ b/_pages/en_US/formatting-sd-(mac).txt
@@ -0,0 +1,60 @@
+---
+title: "Formatting SD (Mac)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages.
+
+### Instructions
+
+#### OS X El Capitan (10.11) and later
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. In the top-left "View" menu, choose "Show All Devices"
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Erase" at the top
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Ensure that "Scheme" is set to "Master Boot Record"
+ + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
+1. Click "Erase"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+#### OS X Yosemite (10.10) and earlier
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run the Disk Utility app
+1. Select your SD card in the left panel
+
+ Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Click "Partition" at the top
+ + If "Partition" does not appear, make sure to choose the device instead of a volume
+1. Ensure that "Partition Layout" is set to "1 Partition"
+1. Enter anything for "Name"
+1. Ensure that "Format" is set to "MS-DOS (FAT)"
+1. Click "Options" below the partition table
+1. Choose "Master Boot Record"
+1. Click "OK"
+1. Click "Apply"
+1. Click "Partition"
+1. Wait for the format to finish
+1. Close Disk Utility
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
diff --git a/_pages/en_US/formatting-sd-(windows).txt b/_pages/en_US/formatting-sd-(windows).txt
new file mode 100644
index 0000000000..fb92106ee4
--- /dev/null
+++ b/_pages/en_US/formatting-sd-(windows).txt
@@ -0,0 +1,43 @@
+---
+title: "Formatting SD (Windows)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### What You Need
+
+* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)
+
+### Instructions
+
+1. Insert your SD card into your computer
+1. If the SD card has any files and folders on it, copy everything to a folder on your computer
+1. Run `guiformat.exe`
+1. Select your SD card's drive letter for "Drive"
+
+ Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
+ {: .notice--danger}
+
+1. Select a size for "Allocation unit size"
+ + If the SD card is 64GB or below, choose 32768
+ * If the SD card is above 64GB, choose 65536
+1. Enter anything for "Volume label"
+1. Ensure that "Quick Format" is selected
+1. Click "Start"
+1. Click "OK"
+1. Wait for the format to finish
+1. Click "Close"
+1. If the SD card had any files and folders on it before the format, copy everything back from your computer
+
+### Common Errors
+
+* Failed to open device: GetLastError()=32
+ + Close everything that may be using the SD card, such as any File Explorer windows.
diff --git a/_pages/en_US/get-started-(new-3ds).txt b/_pages/en_US/get-started-(new-3ds).txt
new file mode 100644
index 0000000000..0b3ac65542
--- /dev/null
+++ b/_pages/en_US/get-started-(new-3ds).txt
@@ -0,0 +1,65 @@
+---
+title: "Get Started (New 3DS)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive.
+
+Your device version can be found at the bottom right of the top screen of the System Settings.
+
+![]({{ "/images/screenshots/system-version.png" | absolute_url }})
+{: .notice--info}
+
+{% capture notice-1 %}
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
+
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+### Version Table
+
+
diff --git a/_pages/en_US/get-started-(old-3ds).txt b/_pages/en_US/get-started-(old-3ds).txt
new file mode 100644
index 0000000000..fc438fb876
--- /dev/null
+++ b/_pages/en_US/get-started-(old-3ds).txt
@@ -0,0 +1,61 @@
+---
+title: "Get Started (Old 3DS)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive.
+
+Your device version can be found at the bottom right of the top screen of the System Settings.
+
+![]({{ "/images/screenshots/system-version.png" | absolute_url }})
+{: .notice--info}
+
+{% capture notice-1 %}
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
+
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
+
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+### Version Table
+
+
diff --git a/_pages/en_US/get-started.txt b/_pages/en_US/get-started.txt
index be25bdc7a5..0b4825d727 100644
--- a/_pages/en_US/get-started.txt
+++ b/_pages/en_US/get-started.txt
@@ -6,79 +6,22 @@ title: "Get Started"
### Required Reading
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
+The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one.
+{: .notice}
-Your device version can be found at the bottom right of the top screen of the System Settings.
-![]({{ "/images/screenshots/system-version.png" | absolute_url }})
-{: .notice--info}
+Click the image of your device to take you to the appropriate page.
+{: .notice--primary}
-Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
+Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device.
{: .notice--info}
Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!
{: .notice--warning}
-{% capture notice-1 %}
-While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-
-You should avoid the following actions:
-1. Piracy
-1. Cheating online
-1. Suspicious behaviour on eShop (for example, credit card chargebacks)
-
-We believe SpotPass and StreetPass are also safe for use at this time.
-
-{% endcapture %}
-
-{{ notice-1 | markdownify }}
-
If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding.
{: .notice--warning}
-### Version Table
-
-
-
+| New 3DS or New 2DS | Old 3DS or Old 2DS |
+|:-:|:-:|
+| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds)) [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))
[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds)) [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))
[![2DS](/images/2ds.png)](get-started-(old-3ds)) |
diff --git a/_pages/en_US/home.txt b/_pages/en_US/home.txt
index 11c0abea21..de0e6196bf 100644
--- a/_pages/en_US/home.txt
+++ b/_pages/en_US/home.txt
@@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
+ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup).
-+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.14.0 or below.
++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0).
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
-+ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). If your SD card is 64GB or larger, use an Allocation Unit Size of 64K (65536) instead.
++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/en_US/homebrew-launcher-(pichaxx).txt b/_pages/en_US/homebrew-launcher-(pichaxx).txt
index 5201af49bb..3e7eea3021 100644
--- a/_pages/en_US/homebrew-launcher-(pichaxx).txt
+++ b/_pages/en_US/homebrew-launcher-(pichaxx).txt
@@ -4,6 +4,9 @@ title: "Homebrew Launcher (PicHaxx)"
{% include toc title="Table of Contents" %}
+This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
+{: .notice--warning}
+
### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
@@ -37,16 +40,17 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
1. Select your `movable.sed` file
1. Select "Build and Download"
1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
- + This `` will be the same one that you used in [Seedminer](seedminer)
-1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
+ + The `` will be the same one that you used in [Seedminer](seedminer)
+ + The `` is a 32 character long folder inside of the ``
+1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card
+ Overwrite the old save file when prompted
1. Reinsert your SD card into your device
1. Power on your device
1. Launch "Pokemon Picross"
1. If the exploit was successful, your device will have loaded the Homebrew Launcher
- + You may see an error stating there are no applications found.
-1. Power off your device.
+ + You may see an error stating there are no applications found
+1. Power off your device
___
diff --git a/_pages/en_US/homebrew-launcher-(soundhax).txt b/_pages/en_US/homebrew-launcher-(soundhax).txt
index 8667e8c287..04d8152155 100644
--- a/_pages/en_US/homebrew-launcher-(soundhax).txt
+++ b/_pages/en_US/homebrew-launcher-(soundhax).txt
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint
### What You Need
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)*
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)*
### Instructions
diff --git a/_pages/en_US/homebrew-launcher-(steelhax).txt b/_pages/en_US/homebrew-launcher-(steelhax).txt
index 681be6021f..65ec1b9a69 100644
--- a/_pages/en_US/homebrew-launcher-(steelhax).txt
+++ b/_pages/en_US/homebrew-launcher-(steelhax).txt
@@ -2,62 +2,5 @@
title: "Homebrew Launcher (Steelhax)"
---
-{% include toc title="Table of Contents" %}
-
-### Required Reading
-
-This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop.
-
-If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)).
-{: .notice--success}
-
-If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!
+This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page.
{: .notice--warning}
-
-### What You Need
-
-* The free eShop game "Steel Diver: Sub Wars"
-* Your `movable.sed` file from completing [Seedminer](seedminer)
-* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip)
-* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)*
-
-### Instructions
-
-#### Section I - Prep Work
-
-1. Create a folder named `3ds` on the root of your SD card if it does not already exist
-1. Copy `boot.3dsx` to the root of your SD card
-1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card
-1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin`
-
-#### Section II - Steelminer
-
-1. Insert your SD card into your device
-1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
- + Decline the game update when prompted
- + If you have already updated the game, use the Data Management menu of the System Settings to delete the update
-1. Exit "Steel Diver: Sub Wars"
-1. Power off your device
-1. Insert your SD card into your computer
-1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer
-1. Select your `movable.sed` file
-1. Select "Start!"
-1. Wait for the process to complete
-1. Navigate to `Nintendo 3DS` -> `