treewide: fixup use of configure-luma3ds on boot

- frogtool: was never updated to remove `onboot` flag
- others: don't mention "it will boot to luma config" twice

_pages/en_US/bannerbomb3-fredtool-(twn).txt

@@ -111,11 +111,8 @@ These instructions are for Taiwanese consoles ONLY (as indicated by a T at the e
 
 #### Section VI - Luma3DS Configuration
 
-1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
+1. Press and hold (Select), and while holding (Select), power on your device
-  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+{% include_relative include/configure-luma3ds.txt %}
-  + For the purpose of this guide, these settings will be left on default settings
-  + If you boot to HOME Menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-1. Press (Start) to save and reboot
 
 #### Section VII - Restoring DS Download Play
 

_pages/en_US/installing-boot9strap-(fredtool).txt

@@ -57,7 +57,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
 
 #### Section VI - Luma3DS Configuration
 
-1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
+1. Press and hold (Select), and while holding (Select), power on your device
 {% include_relative include/configure-luma3ds.txt %}
 
 {% include_relative include/luma3ds-installed-note.txt %}

_pages/en_US/installing-boot9strap-(fredtool-inject).txt

@@ -45,7 +45,7 @@ You should only be able to get to this page if you are running version 11.17.0.
 
 #### Section V - Luma3DS Configuration
 
-1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
+1. Press and hold (Select), and while holding (Select), power on your device
 {% include_relative include/configure-luma3ds.txt %}
 
 {% include_relative include/luma3ds-installed-note.txt %}

_pages/en_US/installing-boot9strap-(fredtool-legacy).txt

@@ -61,7 +61,7 @@ In this section, you will trigger the BannerBomb3 exploit using the DSiWare Mana
 
 #### Section VI - Luma3DS Configuration
 
-1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
+1. Press and hold (Select), and while holding (Select), power on your device
 {% include_relative include/configure-luma3ds.txt %}
 
 {% include_relative include/luma3ds-installed-note.txt %}

_pages/en_US/installing-boot9strap-(frogtool).txt

@@ -56,7 +56,8 @@ If you are unable to install one, follow [Bannerbomb3](bannerbomb3) instead.
 
 #### Section VI - Luma3DS Configuration
 
-{% include_relative include/configure-luma3ds.txt onboot="true" %}
+1. Press and hold (Select), and while holding (Select), power on your device
+{% include_relative include/configure-luma3ds.txt %}
 
 {% include_relative include/luma3ds-installed-note.txt %}
 

_pages/en_US/installing-boot9strap-(hardmod).txt

@@ -95,7 +95,7 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
 1. Power off your device
 1. Disconnect your hardmod
-1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
+1. Press and hold (Select), and while holding (Select), power on your device
 {% include_relative include/configure-luma3ds.txt %}
 
 {% include_relative include/luma3ds-installed-note.txt %}