Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
-
-
Installed eShop titles
-
-
Because Nintendo eShop no longer allows purchases, it is no longer possible to purchase new titles. However, you can re-download a title if you had purchased or downloaded them before purchases stopped being possible.
-
-
Any one of the following titles can be used in conjunction with Seedminer to install custom firmware:
-
-
Mario Kart 7 (common preinstalled title; a physical cartridge also works)
-
Pokémon Picross (free-to-play; digital only)
-
Steel Diver: Sub Wars (free-to-play; digital only)
This method requires a compatible DS flashcart to be flashed with ntrboot, which works on all 3DS-family consoles regardless of model or region.
-
-
If none of the above options are available to you, this is the cheapest available option. If you don’t already have a compatible cartridge, a preflashed ntrboot-compatible cartridge can be purchased here for roughly $20 USD.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-
Lesen erforderlich
-
-
Um ein DSiWare-Backup erstellen zu können, nutzen wir eine Schwachstelle im DSiWare-Datenverwaltungs-Fenster der Systemeinstellungen aus.
-
-
Um das zu erreichen, werden wir die Verschlüsselung (movable.sed) nutzen, um ein DSiWare-Backup zu erstellen, das das System dazu bringen wird, die DSi Internet Einstellungs-Software zur SD-Karte zu kopieren.
-
-
Wenn du ein DSiWare-Backup hast, kann ein ausnutzbarer DSiWare-Titel in DS Download Play injiziert werden, der dann genutzt wird, um Custom Firmware zu installieren.
-
-
Diese Anleitung ist NUR für taiwanesische Konsolen (erkennbar an dem T am Ende der Systemversion, zum Beispiel 11.16.0-39T)! If your console is from any other region, choose the other method.
The latest release of Frogminer_save (Frogminer_save.zip)
-
-
-
Abschnitt I - CFW Check
-
-
Als zusätzliche Sicherheitsmaßnahme führen wir eine zusätzliche Überprüfung auf Custom Firmware durch. Das liegt daran, dass die Verwendung dieser Methode, wenn Custom Firmware bereits installiert ist, das Risiko birgt, die Konsole zu bricken (und sie ohne Wiederherstellungsmethoden wie ntrboot unbrauchbar zu machen).
-
-
-
Power off your console
-
Halte den (Select)-Knopf
-
Power on your console while still holding the (Select) button
-
Wenn die Überprüfung erfolgreich war, wirst du in das HOME-Menü starten und kannst mit der Anleitung fortfahren
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Folge Prüfe auf CFW, um deine bestehende CFW zu aktualisieren.
-
-
Abschnitt II - Vorbereitungen
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Kopiere boot.firm und boot.3dsx von der Luma3DS .zip in das Stammverzeichnis deiner SD-Karte
-
-
Das Stammverzeichnis der SD-Karte bezieht sich auf das ursprüngliche Verzeichnis deiner SD-Karte, wo du den Nintendo 3DS Ordner sehen kannst, aber nicht in ihm drin bist
-
-
-
Copy boot.nds (B9STool) from the release .zip to the root of your SD card
-
Kopiere den private Ordner von der Frogminer_save .zip in das Stammverzeichnis deiner SD-Karte
-
Behalte deine SD-Karte in deinem Computer - im nächsten Abschnitt geht es weiter
Bei dem “Username” Feld, gib irgendeinen normalen Namen (keine Leerzeichen oder Sonderzeichen) an
-
Beim “MovableSed” Feld, lade deine movable.sed Datei mit der “Browse…” Option hoch
-
Drücke auf “Build”
-
-
Warte ein paar Sekunden, bis der Erstellungsprozess abgeschlossen ist
-
-
-
Gib im Abschnitt Build-Verlauf links den Benutzernamen in das “suchen” Feld ein
-
Klicke das erste Suchergebnis
-
-
Dieses Ergebnis sollte das neuste sein
-
-
-
Drücke auf den “output_(name).zip” Link
-
Gehe zu Nintendo 3DS -> <ID0> -> <ID1> auf deiner SD-Karte
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
Erstelle einen Ordner mit dem Namen Nintendo DSiWare innerhalb der <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Öffne die output_(name) .zip Datei und gehe zu China_Taiwan -> output_setup
-
Kopiere alle sechs .bin Dateien in den Nintendo DSiWare Ordner
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Gehe zu Data Management -> DSiWare -> SD Card -> (Seite 2)
-
Merke dir die Zahl des DSiWare Titels auf der zweiten Seite (es wird eine Nummer zwischen 1 und 6 sein)
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Navigiere zu Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare auf deiner SD-Karte
-
Öffne die output_(name) .zip Datei und gehe zu China_Taiwan -> output_hax
-
Kopiere die .bin Datei mit der gleichen Nummer wie die auf der zweiten Seite des DSiWare Management Menüs zum Nintendo DSiWare Ordners, überschreibe, wenn du gefragt wirst
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Warte ein bisschen
-
-
The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the console showing an error message and rebooting
-
Wenn du den violetten Bildschirm nicht gesehen hast, ist etwas schiefgegangen
-
-
-
Du solltest nun die 42383821.bin Datei im Stammverzeichnis deiner SD-Karte haben
-
Gehe zu Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare auf deiner SD-Karte
-
Lösche alle .bin Dateien im Nintendo DSiWare Ordner
Bei dem “Username” Feld, gib irgendeinen normalen Namen (keine Leerzeichen oder Sonderzeichen) an
-
-
Du solltest einen anderen Namen angeben, um ihn von der Ausgabe von BannerBomb3 zu unterscheiden
-
-
-
Wähle beim “DSiBin” Feld deine 42383821.bin Datei mit der “Browse…” Option aus
-
Wähle beim “MovableSed” Feld deine movable.sed Datei mit der “Browse…” Option aus
-
Wähle beim “InjectionTarget” Feld das Ziel auf DSdownloadplay(NICHT memorypit)
-
Drücke auf “Build”
-
-
Warte ein paar Sekunden, bis der Erstellungsprozess abgeschlossen ist
-
-
-
Gib im Abschnitt Build-Verlauf links den Benutzernamen in das “suchen” Feld ein
-
Klicke das erste Suchergebnis
-
-
Dieses Ergebnis sollte das neuste sein
-
-
-
Drücke auf den “output_(name).zip” Link
-
Gehe zu Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare auf deiner SD-Karte
-
Kopiere die 484E4441.bin Datei von dem hax Ordner des heruntergeladenen DSiWare-Archives (output_(name).zip) in den Nintendo DSiWare Ordner
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigiere zu “Data Management” -> “DSiWare”
-
Beim “SD Card” Abschnitt, wähle den “Haxxxxxxxxx!” Titel
-
Select “Copy”, then select “OK”
-
-
-
Abschnitt V - Flipnote Exploit
-
-
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
Falls du eine visuelle Anleitung für diesen Abschnitt brauchst, findest du diese [hier] (https://zoogie.github.io/web/flipnote_directions/).
-
-
-
Verlasse die Systemeinstellungen
-
Launch Download Play on your console (the orange icon with a 3DS on it)
-
Wähle “Nintendo DS” aus
-
Wenn der Exploit erfolgreich war, wird dein Gerät die japanische Version von Flipnote Studio laden
-
Schließe den ersten Setup-Vorgang für das gestartete Spiel ab, bis du das Hauptmenü erreichst
-
-
Wähle immer die linke Option aus, wenn du während des Setup-Vorgangs zu etwas aufgefordert wirst
Wähle mit dem Touchscreen die große linke Box aus, dann die Box mit dem SD-Kartenicon
-
Wenn das Menü geladen ist, wähle das Gesichtssymbol, und dann das Symbol unten rechts aus, um fortzufahren
-
Drücke (X), oder nach oben auf dem Steuerkreuz, abhängig davon, was auf dem oberen Bildschirm angezeigt wird
-
Wähle den zweiten Knopf entlang dem oberen mit einem Filmrollen Icon
-
Scroll nach rechts bis “3/3” ausgewählt ist
-
Tippe die dritte Box mit dem Buchstaben “A” an
-
Scrolle nach links bis “1/3” ausgewählt ist
-
Tippe die vierte Box mit dem Buchstaben “A” an
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section VI - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Navigiere mit dem Steuerkreuz zu “Install boot9strap”
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Drücke (A), dann START und SELECT gleichzeitig um den Prozess zu starten
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hältst
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section VII - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Section VIII - Restoring DS Download Play
-
-
-
Navigiere zu Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare auf deiner SD-Karte
-
Copy the 484E4441.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigiere zu “Data Management” -> “DSiWare”
-
Beim “SD Card” Abschnitt, wähle den “Haxxxxxxxxx!” Titel
-
Select “Copy”, then select “OK”
-
Verlasse die Systemeinstellungen
-
Power off your console
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Diese Anleitung funktioniert mit den folgenden Konsolenregionen: USA, Europa, Japan und Korea. Diese werden mit den Buchstaben U, E, J oder K nach der Systemversion angezeigt.
-
-
Falls du eine Taiwanesische Konsole besitzen solltest (gekennzeichnet durch ein T nach der Systemversion), folge dieser Anleitung.
-
-
Was du benötigst
-
-
-
Your movable.sed file from completing Seedminer
-
The latest release of BannerBomb3 (Release_v3.0.zip, direct download)
-
-
-
Abschnitt I - Vorbereitungen
-
-
In this section, you will copy the files needed to trigger the BannerBomb3 exploit onto your console’s SD card.
Lade deine movable.sed mit der “Choose File” Option hoch
-
Klicke “Build and Download”
-
-
This will download an exploit DSiWare called F00D43D5.bin, which will be contained in a zip archive (BannerBomb3.zip)
-
-
-
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
-
-
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-
This file does not need to be opened or extracted
-
-
-
-
Copy Launcher.dat from the folder for your model and region inside the Release .zip to the root of your SD card
-
Gehe zu Nintendo 3DS -> <ID0> -> <ID1> auf deiner SD-Karte
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
-
Erstelle einen Ordner mit dem Namen Nintendo DSiWare innerhalb der <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
-
-
-
-
-
Section II - BannerBomb3
-
-
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
-
-
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
-
Your console should show the BB3 multihax menu
-
-
-
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
-
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Yes, you can still install custom firmware on your 3DS, even after the closure of eShop.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-
-Technische Details (optional)
-
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
-
-
-
-
This method requires a working 3DS camera.
-
-
Was du brauchst
-
-
-
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
-
The latest release of HBL otherapps (direct download)
-
-
-
Anleitung
-
-
Abschnitt I - Vorbereitungen
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
-
-
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-
-
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
-
-
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-
-
-
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
-
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
-
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
-
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - freakyhax
-
-
-
Reinsert your SD card into your console
-
Power on your console
-
Launch Freakyforms Deluxe
-
In the game menu, select Play -> Camera -> Load a QR code
-
Select the QR code
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Schritt III - boot9strap installieren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
This method of using Seedminer for further exploitation uses your movable.sed file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application.
-
-
This is a currently working implementation of the “FIRM partitions known-plaintext” exploit detailed here.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
The latest release of Frogminer_save (Frogminer_save.zip)
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
-
-
-
Abschnitt I - CFW Check
-
-
Als zusätzliche Sicherheitsmaßnahme führen wir eine zusätzliche Überprüfung auf Custom Firmware durch. Das liegt daran, dass die Verwendung dieser Methode, wenn Custom Firmware bereits installiert ist, das Risiko birgt, die Konsole zu bricken (und sie ohne Wiederherstellungsmethoden wie ntrboot unbrauchbar zu machen).
-
-
-
Power off your console
-
Halte den (Select)-Knopf
-
Power on your console while still holding the (Select) button
-
Wenn die Überprüfung erfolgreich war, wirst du in das HOME-Menü starten und kannst mit der Anleitung fortfahren
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Folge Prüfe auf CFW, um deine bestehende CFW zu aktualisieren.
-
-
Abschnitt II - Vorbereitungen
-
-
In this section, you will copy the files necessary to temporarily replace DS Connection Settings with Flipnote Studio, which is used to launch the boot9strap (custom firmware) installer.
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
Falls du eine visuelle Anleitung für diesen Abschnitt brauchst, findest du diese [hier] (https://zoogie.github.io/web/flipnote_directions/).
-
-
-
Return to main menu of the System Settings
-
Navigate to Internet Settings -> Nintendo DS Connections, then select “OK” (image)
-
If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
-
Wähle mit dem Touchscreen die große linke Box aus, dann die Box mit dem SD-Kartenicon
-
Wenn das Menü geladen ist, wähle das Gesichtssymbol, und dann das Symbol unten rechts aus, um fortzufahren
-
Drücke (X), oder nach oben auf dem Steuerkreuz, abhängig davon, was auf dem oberen Bildschirm angezeigt wird
-
Wähle den zweiten Knopf entlang dem oberen mit einem Filmrollen Icon
-
Scroll nach rechts bis “3/3” ausgewählt ist
-
Tippe die dritte Box mit dem Buchstaben “A” an
-
Scrolle nach links bis “1/3” ausgewählt ist
-
Tippe die vierte Box mit dem Buchstaben “A” an
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section V - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Navigiere mit dem Steuerkreuz zu “Install boot9strap”
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Drücke (A), dann START und SELECT gleichzeitig um den Prozess zu starten
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hältst
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section VI - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
-
-
-
Section VII - Restoring DS Connection Settings
-
-
In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.
-
-
-
Navigiere zu Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare auf deiner SD-Karte
-
Copy the 42383841.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder, replacing the existing one
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Once we have movable.sed, we can edit the SD card data of the game Mario Kart 7 to install menuhax67, which will allow us to get Homebrew Launcher access.
-
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-
See here for information about Kartminer7, here for information about menuhax67, and here for information about nimdsphax.
-
-
-
-
Was du brauchst
-
-
-
A physical or digital copy of Mario Kart 7 updated to the latest version (v1.2)
-
-
You can update Mario Kart 7 from eShop or by following the update prompt when you launch the game
-
-
-
A computer running Windows, macOS, or Linux
-
Your movable.sed file from completing Seedminer
-
The latest release of Kartminer7 (the release marked WINDOWS if you have a Windows computer, or the release marked LINUX-macOS if you have a macOS or Linux-based computer)
-
Die neueste Version von boot9strap (Direkter Download)
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
-
-
-
Section I - Preparing Mario Kart 7 data
-
-
In this section, you will have the 3DS generate some data in Mario Kart 7 that will be used to install the exploit in a later section.
-
-
-
Reinsert your SD card into your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
If you are prompted to, hit “Next” and “OK” to all of the prompts that you see
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press the (Home) button to suspend Mario Kart 7
-
Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
-
Power off your console
-
-
-
Section II - SD Card Prep Work
-
-
-
Stecke deine SD-Karte in deinen Computer
-
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
-
-
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-
-
-
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
-
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
-
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
-
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
-
Keep your SD card inserted in your computer, as it is still required in the next section
-
-
-
-
-
-
-
Section III - Installing Kartminer7
-
-
-
Extract the Release_BETA_mk7 .zip to somewhere on your computer (i.e. your desktop)
-
Copy your movable.sed file to the resources folder of the Release_BETA_mk7 folder
-
-
Ensure that the file is named exactly movable.sed
-
-
-
Open the backup folder inside of the Release_BETA_mk7 folder
-
Double-click on the BACKUP file corresponding to your console’s region (e.g. backup_USA if you have a USA copy of Mario Kart 7)
-
-
If you are unsure of your console region, you can check System Settings. U = USA; E = EUR, J = JPN
-
If you get a message from Windows Defender, click “More info”, “Run anyway”, then press any key to continue
-
If the backup was successful, you should see a new folder appear
-
If you wish to restore this data at a later date (after finishing this guide), insert your SD card and double-click on the RESTORE file corresponding to your console’s region
-
-
-
Go back to the Release_BETA_mk7 folder, then double-click on the file corresponding to your console’s region (e.g. USA if you have a USA copy of Mario Kart 7)
-
Reinsert your SD card into your console
-
-
-
Section IV - Kartminer7
-
-
-
Power on your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press (A) over and over again
-
-
You should eventually see the “Start Race?” prompt, then the colours on the bottom screen should change from red, to blue, to white
-
If you see the red/blue/white screens but the 3DS crashes, just reboot and try again
-
If you don’t see ANY colours, change your system language (if possible), then try the exploit again
-
-
-
If the exploit was successful, the 3DS will have booted into the 3DS ROP xPloit Injector
-
-
-
Section V - Installing menuhax67
-
-
-
Press (Y) + (D-Pad Down) to install menuhax67
-
-
The console will automatically power off
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
-
-
-
-
-
Section VI - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Section VII - Removing menuhax67
-
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
-
-
-
Launch the Download Play application ()
-
Wait until you see the Nintendo 3DS and Nintendo DS buttons
-
Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
-
Wähle “Miscellaneous options”
-
Wähle “Switch the hb. title to the current app.”
-
Drücke (B) um fortzufahren
-
Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren
-
Drücke (B), um das Rosalina-Menü zu schließen
-
Press (Home) to suspend Download Play
-
Press the “Close” button on the bottom screen to close Download Play
-
Re-launch the Download Play application
-
Your console should load the Homebrew Launcher
-
-
If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
-
-
-
Launch menuhax67_installer from the list of homebrew
-
Select REMOVE menuhax67
-
When you see “done.”, press (A), then press (A) on “EXIT to menu”
-
-
-
At this point, you can re-enable wireless communications.
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
-
-
-
Abschnitt I - Vorbereitungen
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
-
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
-
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
-
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
-
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
-
-
-
-
-
-
-
-
Section II - menuhax67
-
-
In this section you will use the menuhax67 exploit installed earlier to launch nimdsphax, which will load SafeB9SInstaller.
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Schritt III - boot9strap installieren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Section IV - Removing menuhax67
-
-
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
-
-
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
-
-
Your console will automatically reboot
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Navigiere zu Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare auf deiner SD-Karte
-
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
This method requires a computer running Windows, Linux, or macOS. Phones or tablets are NOT currently supported. If you do not have access to a computer, you will need to use an alternate exploit.
+
This method requires a computer running Windows, Linux, or macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-
-Technische Details (optional)
-
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
-
-
-
This method requires a working 3DS camera.
-
-
This process will overwrite your Cubic Ninja save file, if you have one.
If the game exits to the HOME Menu, then the exploit has installed correctly
-
-
-
Launch “Cubic Ninja” again
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Schritt III - boot9strap installieren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
We use petit-compwner to launch b9sTool, which installs boot9strap.
-
-
See here for more information about petit-compwner.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
-
-
Was du brauchst
-
-
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
-
-
-
Abschnitt I - CFW Check
-
-
Als zusätzliche Sicherheitsmaßnahme führen wir eine zusätzliche Überprüfung auf Custom Firmware durch. Das liegt daran, dass die Verwendung dieser Methode, wenn Custom Firmware bereits installiert ist, das Risiko birgt, die Konsole zu bricken (und sie ohne Wiederherstellungsmethoden wie ntrboot unbrauchbar zu machen).
-
-
-
Power off your console
-
Halte den (Select)-Knopf
-
Power on your console while still holding the (Select) button
-
Wenn die Überprüfung erfolgreich war, wirst du in das HOME-Menü starten und kannst mit der Anleitung fortfahren
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Folge Prüfe auf CFW, um deine bestehende CFW zu aktualisieren.
-
-
Abschnitt II - Vorbereitungen
-
-
In this section, you will copy the files necessary to launch b9sTool, which is used to launch the boot9strap (custom firmware) installer.
-
-
-
Stecke deine SD-Karte in deinen Computer
-
Copy boot.nds (B9STool) from the release .zip to the root of your SD card
-
-
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-
-
-
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
-
Reinsert your SD card into your console
-
-
Power on your console
-
-
-
-
-
-
Section III - petit-compwner
-
-
In this section, you will scan the QR codes needed to trigger the petit-compwner exploit.
-
-
-
Open the latest release of petit-compwner on your computer
-
On your console, launch Petit Computer
-
Select File Management
-
Select Read QR Codes
-
Scan each QR code in order, from 1/5 to 5/5
-
Once you have scanned all the QR codes, exit File Management
-
Select View Gallery
-
Launch the PWN program
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section IV - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Navigiere mit dem Steuerkreuz zu “Install boot9strap”
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Drücke (A), dann START und SELECT gleichzeitig um den Prozess zu starten
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hältst
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section V - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
Was du brauchst
-
-
-
The game “Pokémon Picross” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Pokémon Picross
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
-
The latest release of HBL otherapps (direct download)
-
-
-
Anleitung
-
-
Abschnitt I - Vorbereitungen
-
-
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
-
-
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-
-
-
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
-
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
-
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
-
-
-
-
-
-
-
-
Section II - PicHaxx
-
-
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Schritt III - boot9strap installieren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-
This set of instructions does not support the Japanese version of SmileBASIC. The guide for that version can be found here.
-
-
-Technische Details (optional)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
Was du brauchst
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
-
The latest release of HBL otherapps (direct download)
-
-
-
Anleitung
-
-
Abschnitt I - Vorbereitungen
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
-
-
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-
-
-
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
-
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
-
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Copy the petitcom .icn for your region to the root of your SD card
-
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
Update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
-
-
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
-
-
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Schritt III - boot9strap installieren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-
This set of instructions does not support the USA and EUR versions of SmileBASIC. The guide for those versions can be found here.
-
-
-Technische Details (optional)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
Was du brauchst
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
Die neueste Version von Luma3DS (die Luma3DS .zip Datei)
-
The latest release of HBL otherapps (direct download)
-
-
-
Anleitung
-
-
Abschnitt I - Vorbereitungen
-
-
Make sure SmileBASIC is updated to the latest version
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
-
-
The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-
-
-
Erstelle einen Ordner namens boot9strap im Stammverzeichnis deiner SD-Karte
-
Kopiere boot9strap.firm und boot9strap.firm.sha aus der boot9strap .zip in den /boot9strap/-Ordner auf deiner SD-Karte
-
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
-
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Erstelle einen Ordner namens 3ds im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
DO NOT update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Schritt III - boot9strap installieren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-
-Technische Details (optional)
-
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
Was du brauchst
-
-
-
The game “Steel Diver: Sub Wars” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> <8-character-region> -> data on your SD card
-
-
EUR Region: 000d7e00
-
JPN Region: 000d7c00
-
USA Region: 000d7d00
-
-
-
Copy the newly downloaded 00000001.sav file to the data folder on your SD card
-
-
Overwrite the old save file when prompted
-
-
-
Reinsert your SD card into your console
-
Power on your console
-
Launch “Steel Diver: Sub Wars”
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Schritt III - boot9strap installieren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Das Luma3DS Konfigurations-Menü enthält Einstellungen für die Luma3DS Custom Firmware. Viele dieser Einstellungen sind nützlich für Personalisierung und Debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Drücke (Start) zum Speichern und neustarten
-
-
-
Ab diesem Punkt wird deine Konsole standardmäßig Luma3DS starten.
-
-
Luma3DS sieht nicht anders aus als das normale HOME-Menü. Wenn deine Konsole in das HOME-Menü gestartet ist, läuft Custom Firmware auf ihr.
-
Auf der nächsten Seite wirst du nützliche Homebrew Apps installieren, um die Installation abzuschließen.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
If this is your first time modding a 3DS (or you’re unfamiliar with technology), keep reading! Otherwise, if you have prior experience and know what you’re doing, continue to Get Started.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Navigiere zum “Nintendo 3DS”-Ordner auf deiner SD-Karte
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Paste your 32-letter folder name into a document you can reference later
-
-
This folder is known as your “ID0”. Take note of this as this guide will refer to it as such later
-
-
-
Power on your console
-
-
Deine SD-Karte muss an dieser Stelle noch nicht wieder eingesteckt werden
-
-
-
Go to your Friend List (the orange Face Icon in the top row of your HOME Menu)
-
-
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Find your Mii profile, then find the “Friend Code” field on the top screen
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next steps
-
-
Select the method based on the application that you have installed on your 3DS. No matter which method you pick, the end result will be the same.
-
-
Mario Kart 7
-
-
This method uses a cartridge or digital copy of Mario Kart 7. Using the movable.sed file, you can modify Mario Kart 7’s SD card data that will give you access to Homebrew Launcher, which will be used for further exploitation.
If you own any DSiWare title on your 3DS, you can dump it to the SD card so that it can be used to temporarily inject Flipnote into DS Connection Settings.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-
-
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don’t know what those are or do not have the hardware necessary, join Nintendo Homebrew on Discord, open the “#mii-mining-assistance” channel and provide the following:
-
-
Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
-
Your console’s ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see this troubleshooting section if you have multiple)
-
Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
Your console’s year of manufacturing; if you don’t know, don’t say it - it’s not super important
-
-
-
-
-Technische Details (optional)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Because we do not have access to the Friends List, we are deriving the first part of movable.sed using a Mii QR code instead of by performing a two-way friend exchange.
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
-
-
-
-
-
Section I - Prep Work
-
-
In this section, you will set up Seedminer and obtain your console’s files that are needed for mining.
-
-
-
Extract the contents of the Seedminer .zip and move the folder with your operating system’s name to anywhere on your computer
-
-
Keep this location handy, as this Seedminer folder will be where multiple other files are placed
-
-
-
In the Seedminer folder, hold SHIFT and right-click anywhere in the folder’s empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
-
In the command line window, type py -3 -m pip install pycryptodomex, hit ENTER, and allow it to install
-
-
If this command fails with the error No module named pip, you must manually install pip. The methods to do this can be found on this page.
-
-
-
Power on your console while the SD card is inserted
-
Open the Mii Maker app
-
Tap the “QR Code/Image Options” button
-
Tap “Save Mii as QR Code”
-
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Navigiere zum “Nintendo 3DS”-Ordner auf deiner SD-Karte
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Click on “Import from…”, then select “QR Code” and upload the Mii QR code from earlier
-
Click on “Export to…”, then select “encrypted (.bin)”
-
-
This will download a file named input.bin
-
-
-
Copy this input.bin to the Seedminer folder
-
Open the terminal/PowerShell/Command Prompt window from earlier
-
Inside this window, enter the command py -3 seedminer_launcher3.py id0 <id0>
-
-
Replace <id0> with the ID0 you copied into a document
-
Do not include the angle brackets
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Once it completes, enter the command py -3 seedminer_launcher3.py mii <model> <year>
-
-
Replace <model> with the model of your console (new or old) - if you aren’t sure, only models with the ZL/ZR buttons and C-Stick are “new”
-
Replace <year> with the year the 3DS was made (On Old 3DS consoles, the years on the backplate, (M)2010/(C)2011, are always the same and NOT an indicator) - if you aren’t sure, see below
-
Estimate manufacturing years are: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
You can also leave the year empty, which will make it start in the middle
-
The mining process will usually take up to 90 minutes, depending on luck and your GPU’s strength
-
The first stage will likely max out at roughly offset 1500, depending on console model
-
If the second stage (after seeing movable_part2.sed generation success) gets past offset 100, verify that you input the correct ID0. If your ID0 is correct, you cannot use this method and will have to update to the latest version and see if a non-Seedminer method is available for you here
-
If you see the message input.bin is invalid size, remake the input.bin using your QR Code. If it still fails, open a different browser and remake the input.bin there
-
If you see the message LFCS has been left blank, use the opposite console model (e.g. mii old instead of mii new)
-
-
-
When it finishes, a file called movable.sed will appear in the Seedminer folder
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
-
-Technische Details (optional)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Navigiere zum “Nintendo 3DS”-Ordner auf deiner SD-Karte
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Paste your 32-letter folder name into a document you can reference later
-
-
This folder is known as your “ID0”. Take note of this as this guide will refer to it as such later
-
-
-
Power on your console
-
-
Deine SD-Karte muss an dieser Stelle noch nicht wieder eingesteckt werden
-
-
-
Go to your Friend List (the orange Face Icon in the top row of your HOME Menu)
-
-
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Find your Mii profile, then find the “Friend Code” field on the top screen
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Navigiere zum “Nintendo 3DS”-Ordner auf deiner SD-Karte
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Paste your 32-letter folder name into a document you can reference later
-
-
This folder is known as your “ID0”. Take note of this as this guide will refer to it as such later
-
-
-
Power on your console
-
-
Deine SD-Karte muss an dieser Stelle noch nicht wieder eingesteckt werden
-
-
-
Go to your Friend List (the orange Face Icon in the top row of your HOME Menu)
-
-
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Find your Mii profile, then find the “Friend Code” field on the top screen
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
-
-
-Mehrere Ordner mit langem Namen im Nintendo 3DS Ordner
-
-
-
-
This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. Um herauszufinden, welcher der langen Ordner der richtige ist, folge diesen Anweisungen:
-
-
-
Benenne den Nintendo 3DS Ordner zu BACKUP_Nintendo 3DS um
-
Reinsert your SD card into your console
-
Power on your console
-
Wait for the console to generate the SD card data
-
-
Deine Apps werden verschwunden sein. Das ist normal und wird gleich behoben
-
-
-
Power off your console
-
Stecke deine SD-Karte in deinen Computer
-
Navigiere zum “Nintendo 3DS”-Ordner auf deiner SD-Karte
-
Kopiere den 32 Buchstaben langen Ordnernamen von dem Ordner, den du siehst
-
Die Webseite hat deine movable.sed mit deiner Freundescode- und ID0-Kombination bereits herausgefunden. Du kannst die movable.sed Datei benutzen, die dir die Seite gibt.
-
-
-
-Important! You have been locked out of the automated part1 dumper system...
-
-
Dein Freundescode wurde von dem Bot blockiert, da dein 3DS es nicht geschafft hat, den Bot als Freund hinzuzufügen. Stell sicher, dass dein 3DS korrekt mit dem Internet verbunden ist, und bitte in Nintendo Homebrew on Discord auf Englisch um eine Entperrung.
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
Die Webseite hat festgestellt, dass deine movable.sed nicht brute-forcebar ist. Stell sicher, dass du der Seite die richtige ID0 gegeben hast. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
-
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
-
-
-
-
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
-
-
-
-
-
-
Your SD card should now look something like this:
-
-
-
-
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
-
-
-
-
-DSiWare Management Menü stürzt ab, ohne BB3 multihax menu anzuzeigen
-
Stelle sicher, dass F00D43D5.bin die einzige Datei in Nintendo 3DS -> <ID0> -> <ID1>-> Nintendo DSiWare` ist. If it is, then re-create it with the Bannerbomb3 Injector.
-
-
Stelle außerdem sicher, dass bb3.bin im Stammverzeichnis der SD-Karte liegt. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.
-
-
If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. Wenn das der Fall ist, trete dem Nintendo Homebrew on Discord Server bei und frage, auf Englisch, nach Hilfe.
-
-
-
-Nintendo DSiWare-Datenverwaltung zeigt "Es wurden keine Softwaredaten gefunden."
-
-
F00D43D5.bin fehlt in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. Stelle sicher, dass Nintendo DSiWare korrekt geschrieben und Leerzeichen enthält. Groß-/Kleinschreibung spielt hierbei keine Rolle.
-
-
-
-Nintendo DSiWare-Datenverwaltung zeigt ein Fragezeichen
-
-
Möglicherweise gibt es ein Problem mit deiner F00D43D5.bin Datei (sie kann beschädigt oder für den falschen 3DS bestimmt sein). Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
-
-
-
Installing boot9strap (Fredtool-Inject)
-
-
-Error on DSiHaxInjector page
-
-
Stelle sicher, dass deine movable.sed und das DSiWare-Backup von derselben Konsole stammen. Eine Unterschied führt zu einem Fehler.
-
-
-
-"Haxxxxxxxxx!" erscheint nicht
-
-
Es gibt ein Problem mit deiner 42383821.bin Datei (sie ist falsch, fehlt komplett, falsch platziert oder beschädigt). Erstelle deine Dateien mit der DSIHaxInjector_new Seite neu und stelle sicher, dass du die 42383821.bin aus output.zip -> hax in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare platzierst.
-
-
-
-DSiWare launches normally
-
-
Haxxxxxxxxx! wurde nicht von deiner SD-Karte in deinen Systemspeicher kopiert.
-
-
-
-SD-Karte ist in Flipnote ausgegraut
-
-
Flipnote kann eine Weile benötigen, bis es deine Karte einsortiert hat, wenn du eine große SD-Karte benutzt. Warte für ein paar Minuten.
-
-
-
-Lenny Gesicht erscheint nicht im SD-Kartenbereich
-
-
Du hast den private Ordner von der Frogminer_save .zip nicht in das Stammverzeichnis deiner SD-Karte kopiert.
-
-
-
-Flipnote friert ein
-
-
Möglicherweise hast du versehentlich den Touchscreen berührt, während du in dem modifizierten Flipnote gewesen bist. Starte die Nintendo DS-Verbindungen erneut und versuche es nochmal. Überprüfe, dass du nicht versehentlich den Touchscreen verwendest.
-
-
-
-Grüner Bildschirm nach Einfügen
-
-
Die Datei boot.nds fehlt oder ist falsch platziert. Lade die neueste Version von b9stool herunter, und platziere boot.nds im Stammverzeichnis deiner SD-Karte und ersetze die vorhandene Datei.
-
-
-
-Weißer Bildschirm nach Einfügen
-
Es gibt ein Problem mit deiner boot.nds Datei. Lade die neueste Version von b9stool erneut herunter, und platziere boot.nds im Stammverzeichnis deiner SD-Karte und ersetze die vorhandene Datei.
-
-
-
-Unable to open Luma3DS configuration menu after running B9STool
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
-
-"An exception occurred" or Errdisp when opening Picross
-
-
Your console already has custom firmware. You should check for CFW.
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
-
-Game starts normally
-
-
Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.
-
-
Installing boot9strap (Soundhax)
@@ -798,150 +533,6 @@ verwenden wirst
Wenn dies nicht gelingt, benutze eine andere SD-Karte.
-
Installing boot9strap (SSLoth-Browser)
-
-
-Red/purple/pink and white screen after running Browserhax
-
-
This likely indicates that you already have custom firmware. You should check for CFW.
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
The file arm11code.bin is missing or misplaced. Lade die neuste Version von universal-otherapp herunter, platziere otherapp.bin im Stammverzeichnis deiner SD-Karte und benenne die Datei zu arm11code.bin um. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There may be an issue with your arm11code.bin file. Lade die neuste Version von universal-otherapp herunter, platziere otherapp.bin im Stammverzeichnis deiner SD-Karte und benenne die Datei zu arm11code.bin um. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
You can also try resetting your browser save data:
-
-
-
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
-
Try the exploit again
-
-
-
-
-
-Opening the browserhax QR code or URL crashes
-
-
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
-
-
-
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
-
-
-
-"PrepareArm9ForTwl returned error c8804631!"
-
-
Sichere deine Daten und formatiere deine SD-Karte als FAT32 mit dem empfohlenen Werkzeug je nach Betriebssystem (Windows, macOS, Linux). MiniTool Partition Wizard und das HP Formatierungswerkzeug (HPUSBDisk) sind bekannt für Probleme mit 3DS SD-Karten.
-
-
Wenn dies nicht gelingt, benutze eine andere SD-Karte.
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-"An error has occurred. Please save your data in any software currently in use, then restart the system."
-
-
The date is set incorrectly. To set it correctly, follow these steps:
-
-
-
Select the System Settings icon on the HOME Menu, and tap Open.
-
Tap Other Settings.
-
Tap Date & Time.
-
Tap Today’s date.
-
Tap Up/Down Arrows to set the correct Day, Month and Year.
-
Select OK to confirm.
-
-
-
If the problem persists:
-
-
-
Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
-
Ensure that you selected the correct payload for your region AND system version
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
-
Try the exploit again
-
-
-
Try changing the system language to something other than the current language
-
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
-
-
-
-
-
-
-An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
-
-
This likely indicates that you already have custom firmware. You should check for CFW.
-
-
-
Installing boot9strap (MSET9)
@@ -960,7 +551,7 @@ verwenden wirst
-
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -980,6 +571,15 @@ verwenden wirst
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1079,7 +679,7 @@ verwenden wirst
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
-
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
@@ -1117,7 +717,7 @@ verwenden wirst
Type the number corresponding to your console model and version, then press Enter
Type 3, then press Enter to remove MSET9
-
If possible, use a new SD card; otherwise, backup and reformat your existing SD card as FAT32 (Windows, Linux)
+
If possible, use a new SD card; otherwise, backup and reformat your existing SD card as FAT32 (Windows, Linux, macOS)
Insert the formatted, blank SD card into your console
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
+
Try the exploit again
+
+
+
Try changing the system language to something other than the current language
+
+
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
+
+
+
+
+
+
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
+
+
This likely indicates that you already have custom firmware. You should check for CFW.
+
+
+
+
Installing boot9strap (SSLoth-Browser)
+
+
+Red/purple/pink and white screen after running Browserhax
+
+
This likely indicates that you already have custom firmware. You should check for CFW.
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
The file arm11code.bin is missing or misplaced. Lade die neuste Version von universal-otherapp herunter, platziere otherapp.bin im Stammverzeichnis deiner SD-Karte und benenne die Datei zu arm11code.bin um. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
+
+
+
+"An error has occurred, forcing the software to close..." (white message box)
+
+
There may be an issue with your arm11code.bin file. Lade die neuste Version von universal-otherapp herunter, platziere otherapp.bin im Stammverzeichnis deiner SD-Karte und benenne die Datei zu arm11code.bin um. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
+
+
You can also try resetting your browser save data:
+
+
+
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
+
Try the exploit again
+
+
+
+
+
+Opening the browserhax QR code or URL crashes
+
+
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
+
+
+
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Füge die .bin Erweiterung nicht hinzu, wenn du sie noch nicht siehst.
+
+
+
+"PrepareArm9ForTwl returned error c8804631!"
+
+
Sichere deine Daten und formatiere deine SD-Karte als FAT32 mit dem empfohlenen Werkzeug je nach Betriebssystem (Windows, macOS, Linux). MiniTool Partition Wizard und das HP Formatierungswerkzeug (HPUSBDisk) sind bekannt für Probleme mit 3DS SD-Karten.
+
+
Wenn dies nicht gelingt, benutze eine andere SD-Karte.
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
Lesen erforderlich
-
-
To use the Seedminer exploit, you must update your console to the latest system version.
-
-
Was du benötigst
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
The updater may display a message saying “Your system is up to date” instead of updating. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
Lesen erforderlich
-
-
To use the super-skaterhax exploit, you must update your console to the latest system version.
-
-
Was du benötigst
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
The updater may display a message saying “Your system is up to date” instead of updating. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
Wenn du diese Anleitung wertschätzt, akzeptieren wir auch Spenden.
-
-
-
-
-
-
Lesen erforderlich
-
-
To use the MSET9 exploit, you must update your console to the latest system version.
-
-
Was du benötigst
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
The updater may display a message saying “Your system is up to date” instead of updating. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
-
-
Installed eShop titles
-
-
Because Nintendo eShop no longer allows purchases, it is no longer possible to purchase new titles. However, you can re-download a title if you had purchased or downloaded them before purchases stopped being possible.
-
-
Any one of the following titles can be used in conjunction with Seedminer to install custom firmware:
-
-
Mario Kart 7 (common preinstalled title; a physical cartridge also works)
-
Pokémon Picross (free-to-play; digital only)
-
Steel Diver: Sub Wars (free-to-play; digital only)
This method requires a compatible DS flashcart to be flashed with ntrboot, which works on all 3DS-family consoles regardless of model or region.
-
-
If none of the above options are available to you, this is the cheapest available option. If you don’t already have a compatible cartridge, a preflashed ntrboot-compatible cartridge can be purchased here for roughly $20 USD.
Para volcar una aplicación DSiWare del sistema, aprovecharemos un fallo en la ventana de Gestión de datos DSiWare de la aplicación Configuración.
-
-
To accomplish this, we use your system’s encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.
-
-
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
-
-
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, choose the other method.
The latest release of Frogminer_save (Frogminer_save.zip)
-
-
-
Sección I - Verificación de CFW
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Power off your console
-
Mantén pulsado el botón (Select)
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
-
-
Sección II - Preparativos
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
-
-
Copy boot.nds (B9STool) from the release .zip to the root of your SD card
-
Copia la carpeta private contenida en el .zip de Frogminer_save a la raíz de tu tarjeta SD
-
Keep your SD card in your computer - there are more things to do in the next section
Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
-
Under the “MovableSed” field, upload your movable.sedusing the “Browse…” option
-
Click “Build”
-
-
Wait a few seconds for the build process to complete
-
-
-
In the Build History section on the left, type the Username into the “Filter Builds” field
-
Click on the first search result
-
-
This result should have the latest timestamp
-
-
-
Click the “output_(name).zip” link
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
Create a folder named Nintendo DSiWare inside of the <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Open the output_(name) .zip file and navigate to China_Taiwan -> output_setup
-
Copy all six .bin files to the Nintendo DSiWare folder
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card -> (page 2)
-
Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
-
Open the output_(name) .zip file and navigate to China_Taiwan -> output_hax
-
Copy the .bin file that is the same number as the one that was on the second page of the DSiWare Management menu to the Nintendo DSiWare folder, and overwrite when prompted
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Wait a while
-
-
The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the console showing an error message and rebooting
-
If you did not see the purple screen, then something went wrong
-
-
-
You should now have the file 42383821.bin on the root of your SD card
-
Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
-
Delete all of the .bin files in the Nintendo DSiWare folder
Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
-
-
You might want to put in a different name to differentiate it from BannerBomb3’s output
-
-
-
Under the “DSiBin” field, upload your 42383821.bin file using the first “Browse…” option
-
Under the “MovableSed” field, upload your movable.sed file using the second “Browse…” option
-
Under the “InjectionTarget” field, set the injection target to DSdownloadplay(NOT memorypit)
-
Click “Build”
-
-
Wait a few seconds for the build process to complete
-
-
-
In the Build History section on the left, type the Username into the “Filter Builds” field
-
Click on the first search result
-
-
This result should have the latest timestamp
-
-
-
Click the “output_(name).zip” link
-
Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
-
Copy the 484E4441.bin file from the hax folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Ve a Data Management -> DSiWare
-
Under the “SD Card” section, select the “Haxxxxxxxxx!” title
-
Selecciona “Copiar”, luego “OK”
-
-
-
Section V - Flipnote Exploit
-
-
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
If you would prefer a visual guide to this section, one is available here.
-
-
-
Exit System Settings
-
Launch Download Play on your console (the orange icon with a 3DS on it)
-
Selecciona “Nintendo DS”
-
If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio
-
Complete the initial setup process for the launched game until you reach the main menu
-
-
Select the left option whenever prompted during the setup process
Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema.
-
-
If you have a Taiwanese console (indicated by a T after the system version), follow this page instead.
-
-
Qué necesitas
-
-
-
Your movable.sed file from completing Seedminer
-
The latest release of BannerBomb3 (Release_v3.0.zip, direct download)
-
-
-
Sección I - Preparativos
-
-
In this section, you will copy the files needed to trigger the BannerBomb3 exploit onto your console’s SD card.
Upload your movable.sed using the “Choose File” option
-
Click “Build and Download”
-
-
This will download an exploit DSiWare called F00D43D5.bin, which will be contained in a zip archive (BannerBomb3.zip)
-
-
-
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
This file does not need to be opened or extracted
-
-
-
-
Copy Launcher.dat from the folder for your model and region inside the Release .zip to the root of your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
-
Create a folder named Nintendo DSiWare inside of the <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
-
-
-
-
-
Sección II - BannerBomb3
-
-
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
-
-
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
-
Your console should show the BB3 multihax menu
-
-
-
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
-
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Yes, you can still install custom firmware on your 3DS, even after the closure of eShop.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
-
-
-
-
This method requires a working 3DS camera.
-
-
Qué necesitas
-
-
-
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of Luma3DS (the Luma3DS .zip file)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instrucciones
-
-
Sección I - Preparativos
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
-
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
-
-
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
-
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
-
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
-
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - freakyhax
-
-
-
Reinsert your SD card into your console
-
Power on your console
-
Launch Freakyforms Deluxe
-
In the game menu, select Play -> Camera -> Load a QR code
-
Select the QR code
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Sección III - Instalar boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Presiona (Start) para guardar y reiniciar
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method of using Seedminer for further exploitation uses your movable.sed file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application.
-
-
This is a currently working implementation of the “FIRM partitions known-plaintext” exploit detailed here.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
The latest release of Frogminer_save (Frogminer_save.zip)
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
The latest release of Luma3DS (the Luma3DS .zip file)
-
-
-
Sección I - Verificación de CFW
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Power off your console
-
Mantén pulsado el botón (Select)
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
-
-
Sección II - Preparativos
-
-
In this section, you will copy the files necessary to temporarily replace DS Connection Settings with Flipnote Studio, which is used to launch the boot9strap (custom firmware) installer.
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
If you would prefer a visual guide to this section, one is available here.
-
-
-
Regresa al menú principal de Configuración de la Consola
-
Navigate to Internet Settings -> Nintendo DS Connections, then select “OK” (image)
-
If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
-
Using the touch-screen, select the large left box, then select the box with an SD card icon
-
Once the menu loads, select the face icon, then the bottom right icon to continue
-
Press (X) or (UP) on the D-Pad depending on which is shown on the top screen
-
Select the second button along the top with a film-reel icon
-
Scroll right until reel “3/3” is selected
-
Tap the third box with the letter “A” in it
-
Scroll left until reel “1/3” is selected
-
Tap the fourth box with the letter “A” in it
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section V - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Using the D-Pad, move to “Install boot9strap”
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Press (A), then press START and SELECT at the same time to begin the process
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
You may have to force power off by holding the power button
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section VI - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Presiona (Start) para guardar y reiniciar
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
-
-
-
Section VII - Restoring DS Connection Settings
-
-
In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.
-
-
-
Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
-
Copy the 42383841.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder, replacing the existing one
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Once we have movable.sed, we can edit the SD card data of the game Mario Kart 7 to install menuhax67, which will allow us to get Homebrew Launcher access.
-
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-
See here for information about Kartminer7, here for information about menuhax67, and here for information about nimdsphax.
-
-
-
-
Qué necesitas
-
-
-
A physical or digital copy of Mario Kart 7 updated to the latest version (v1.2)
-
-
You can update Mario Kart 7 from eShop or by following the update prompt when you launch the game
-
-
-
A computer running Windows, macOS, or Linux
-
Your movable.sed file from completing Seedminer
-
The latest release of Kartminer7 (the release marked WINDOWS if you have a Windows computer, or the release marked LINUX-macOS if you have a macOS or Linux-based computer)
-
The latest release of boot9strap (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
-
-
-
Section I - Preparing Mario Kart 7 data
-
-
In this section, you will have the 3DS generate some data in Mario Kart 7 that will be used to install the exploit in a later section.
-
-
-
Reinsert your SD card into your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
If you are prompted to, hit “Next” and “OK” to all of the prompts that you see
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press the (Home) button to suspend Mario Kart 7
-
Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
-
Power off your console
-
-
-
Section II - SD Card Prep Work
-
-
-
Inserta tu tarjeta SD en tu computadora
-
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
-
-
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
-
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
-
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
-
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
-
Keep your SD card inserted in your computer, as it is still required in the next section
-
-
-
-
-
-
-
Section III - Installing Kartminer7
-
-
-
Extract the Release_BETA_mk7 .zip to somewhere on your computer (i.e. your desktop)
-
Copy your movable.sed file to the resources folder of the Release_BETA_mk7 folder
-
-
Ensure that the file is named exactly movable.sed
-
-
-
Open the backup folder inside of the Release_BETA_mk7 folder
-
Double-click on the BACKUP file corresponding to your console’s region (e.g. backup_USA if you have a USA copy of Mario Kart 7)
-
-
If you are unsure of your console region, you can check System Settings. U = USA; E = EUR, J = JPN
-
If you get a message from Windows Defender, click “More info”, “Run anyway”, then press any key to continue
-
If the backup was successful, you should see a new folder appear
-
If you wish to restore this data at a later date (after finishing this guide), insert your SD card and double-click on the RESTORE file corresponding to your console’s region
-
-
-
Go back to the Release_BETA_mk7 folder, then double-click on the file corresponding to your console’s region (e.g. USA if you have a USA copy of Mario Kart 7)
-
Reinsert your SD card into your console
-
-
-
Section IV - Kartminer7
-
-
-
Power on your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press (A) over and over again
-
-
You should eventually see the “Start Race?” prompt, then the colours on the bottom screen should change from red, to blue, to white
-
If you see the red/blue/white screens but the 3DS crashes, just reboot and try again
-
If you don’t see ANY colours, change your system language (if possible), then try the exploit again
-
-
-
If the exploit was successful, the 3DS will have booted into the 3DS ROP xPloit Injector
-
-
-
Section V - Installing menuhax67
-
-
-
Press (Y) + (D-Pad Down) to install menuhax67
-
-
The console will automatically power off
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
-
-
-
-
-
Section VI - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Presiona (Start) para guardar y reiniciar
-
-
-
Section VII - Removing menuhax67
-
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
-
-
-
Ejecuta la aplicación Modo Descarga ()
-
Espera hasta ver las opciones que dicen Nintendo 3DS y Nintendo DS
-
Presiona (Left Shoulder) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina
-
Selecciona “Miscellaneous options”
-
Selecciona “Switch the hb. title to the current app.”
-
Presiona (B) para continuar
-
Presiona (B) para regresar al menú principal de Rosalina
-
Presiona (B) para salir del menú de Rosalina
-
Press (Home) to suspend Download Play
-
Press the “Close” button on the bottom screen to close Download Play
-
Re-launch the Download Play application
-
Your console should load the Homebrew Launcher
-
-
If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
-
-
-
Launch menuhax67_installer from the list of homebrew
-
Select REMOVE menuhax67
-
When you see “done.”, press (A), then press (A) on “EXIT to menu”
-
-
-
At this point, you can re-enable wireless communications.
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
The latest release of Luma3DS (the Luma3DS .zip file)
-
-
-
Sección I - Preparativos
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
-
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
-
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
-
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
-
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
-
-
-
-
-
-
-
-
Section II - menuhax67
-
-
In this section you will use the menuhax67 exploit installed earlier to launch nimdsphax, which will load SafeB9SInstaller.
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Sección III - Instalar boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Presiona (Start) para guardar y reiniciar
-
-
-
Section IV - Removing menuhax67
-
-
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
-
-
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
-
-
Your console will automatically reboot
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Ve a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare en tu tarjeta SD
-
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method requires a computer running Windows, Linux, or macOS. Phones or tablets are NOT currently supported. If you do not have access to a computer, you will need to use an alternate exploit.
+
This method requires a computer running Windows, Linux, or macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
-
-
-
This method requires a working 3DS camera.
-
-
This process will overwrite your Cubic Ninja save file, if you have one.
We use petit-compwner to launch b9sTool, which installs boot9strap.
-
-
See here for more information about petit-compwner.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
-
-
Qué necesitas
-
-
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
The latest release of Luma3DS (the Luma3DS .zip file)
-
-
-
Sección I - Verificación de CFW
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Power off your console
-
Mantén pulsado el botón (Select)
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
-
-
Sección II - Preparativos
-
-
In this section, you will copy the files necessary to launch b9sTool, which is used to launch the boot9strap (custom firmware) installer.
-
-
-
Inserta tu tarjeta SD en tu computadora
-
Copy boot.nds (B9STool) from the release .zip to the root of your SD card
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
-
-
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
-
Reinsert your SD card into your console
-
-
Power on your console
-
-
-
-
-
-
Section III - petit-compwner
-
-
In this section, you will scan the QR codes needed to trigger the petit-compwner exploit.
-
-
-
Open the latest release of petit-compwner on your computer
-
On your console, launch Petit Computer
-
Select File Management
-
Select Read QR Codes
-
Scan each QR code in order, from 1/5 to 5/5
-
Once you have scanned all the QR codes, exit File Management
-
Select View Gallery
-
Launch the PWN program
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section IV - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Using the D-Pad, move to “Install boot9strap”
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Press (A), then press START and SELECT at the same time to begin the process
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
You may have to force power off by holding the power button
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section V - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Presiona (Start) para guardar y reiniciar
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
Qué necesitas
-
-
-
The game “Pokémon Picross” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Pokémon Picross
The latest release of Luma3DS (the Luma3DS .zip file)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instrucciones
-
-
Sección I - Preparativos
-
-
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
-
-
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
-
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
-
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
-
-
-
-
-
-
-
-
Section II - PicHaxx
-
-
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
This set of instructions does not support the Japanese version of SmileBASIC. The guide for that version can be found here.
-
-
-Technical Details (optional)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
Qué necesitas
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instrucciones
-
-
Sección I - Preparativos
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
-
-
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
-
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
-
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Copy the petitcom .icn for your region to the root of your SD card
-
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
Update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
-
-
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
-
-
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Sección III - Instalar boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Presiona (Start) para guardar y reiniciar
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This set of instructions does not support the USA and EUR versions of SmileBASIC. The guide for those versions can be found here.
-
-
-Technical Details (optional)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
Qué necesitas
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instrucciones
-
-
Sección I - Preparativos
-
-
Make sure SmileBASIC is updated to the latest version
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Copia los archivos boot.firm y boot.3dsx desde el .zip de Luma3DS a la raíz de tu tarjeta SD
-
-
La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-
-
-
Crea una carpeta llamada boot9strap en la raíz de tu tarjeta SD
-
Copia boot9strap.firm y boot9strap.firm.sha desde el .zip de boot9strap a la carpeta /boot9strap/ en tu tarjeta SD
-
Copia SafeB9SInstaller.bin desde el .zip de SafeB9SInstaller a la raíz de tu tarjeta SD
-
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Crea una carpeta llamada 3ds en la raíz de tu tarjeta SD, si aún no existe
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
DO NOT update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Sección III - Instalar boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Presiona (Start) para guardar y reiniciar
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
Qué necesitas
-
-
-
The game “Steel Diver: Sub Wars” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
If this is your first time modding a 3DS (or you’re unfamiliar with technology), keep reading! Otherwise, if you have prior experience and know what you’re doing, continue to Get Started.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Ve a la carpeta Nintendo 3DS en tu tarjeta SD
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Paste your 32-letter folder name into a document you can reference later
-
-
This folder is known as your “ID0”. Take note of this as this guide will refer to it as such later
-
-
-
Power on your console
-
-
Your SD card does not need to be inserted at this point
-
-
-
Go to your Friend List (the orange Face Icon in the top row of your HOME Menu)
-
-
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Encuentra el perfil de tu Mii, luego busca donde dice “Código de amigo” en la pantalla superior
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next steps
-
-
Select the method based on the application that you have installed on your 3DS. No matter which method you pick, the end result will be the same.
-
-
Mario Kart 7
-
-
This method uses a cartridge or digital copy of Mario Kart 7. Using the movable.sed file, you can modify Mario Kart 7’s SD card data that will give you access to Homebrew Launcher, which will be used for further exploitation.
If you own any DSiWare title on your 3DS, you can dump it to the SD card so that it can be used to temporarily inject Flipnote into DS Connection Settings.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don’t know what those are or do not have the hardware necessary, join Nintendo Homebrew on Discord, open the “#mii-mining-assistance” channel and provide the following:
-
-
Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
-
Your console’s ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see this troubleshooting section if you have multiple)
-
Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
Your console’s year of manufacturing; if you don’t know, don’t say it - it’s not super important
-
-
-
-
-Technical Details (optional)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Because we do not have access to the Friends List, we are deriving the first part of movable.sed using a Mii QR code instead of by performing a two-way friend exchange.
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
-
-
-
-
-
Section I - Prep Work
-
-
In this section, you will set up Seedminer and obtain your console’s files that are needed for mining.
-
-
-
Extract the contents of the Seedminer .zip and move the folder with your operating system’s name to anywhere on your computer
-
-
Keep this location handy, as this Seedminer folder will be where multiple other files are placed
-
-
-
In the Seedminer folder, hold SHIFT and right-click anywhere in the folder’s empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
-
In the command line window, type py -3 -m pip install pycryptodomex, hit ENTER, and allow it to install
-
-
If this command fails with the error No module named pip, you must manually install pip. The methods to do this can be found on this page.
-
-
-
Power on your console while the SD card is inserted
-
Open the Mii Maker app
-
Tap the “QR Code/Image Options” button
-
Tap “Save Mii as QR Code”
-
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Ve a la carpeta Nintendo 3DS en tu tarjeta SD
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Click on “Import from…”, then select “QR Code” and upload the Mii QR code from earlier
-
Click on “Export to…”, then select “encrypted (.bin)”
-
-
This will download a file named input.bin
-
-
-
Copy this input.bin to the Seedminer folder
-
Open the terminal/PowerShell/Command Prompt window from earlier
-
Inside this window, enter the command py -3 seedminer_launcher3.py id0 <id0>
-
-
Replace <id0> with the ID0 you copied into a document
-
Do not include the angle brackets
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Once it completes, enter the command py -3 seedminer_launcher3.py mii <model> <year>
-
-
Replace <model> with the model of your console (new or old) - if you aren’t sure, only models with the ZL/ZR buttons and C-Stick are “new”
-
Replace <year> with the year the 3DS was made (On Old 3DS consoles, the years on the backplate, (M)2010/(C)2011, are always the same and NOT an indicator) - if you aren’t sure, see below
-
Estimate manufacturing years are: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
You can also leave the year empty, which will make it start in the middle
-
The mining process will usually take up to 90 minutes, depending on luck and your GPU’s strength
-
The first stage will likely max out at roughly offset 1500, depending on console model
-
If the second stage (after seeing movable_part2.sed generation success) gets past offset 100, verify that you input the correct ID0. If your ID0 is correct, you cannot use this method and will have to update to the latest version and see if a non-Seedminer method is available for you here
-
If you see the message input.bin is invalid size, remake the input.bin using your QR Code. If it still fails, open a different browser and remake the input.bin there
-
If you see the message LFCS has been left blank, use the opposite console model (e.g. mii old instead of mii new)
-
-
-
When it finishes, a file called movable.sed will appear in the Seedminer folder
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Ve a la carpeta Nintendo 3DS en tu tarjeta SD
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Paste your 32-letter folder name into a document you can reference later
-
-
This folder is known as your “ID0”. Take note of this as this guide will refer to it as such later
-
-
-
Power on your console
-
-
Your SD card does not need to be inserted at this point
-
-
-
Go to your Friend List (the orange Face Icon in the top row of your HOME Menu)
-
-
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Encuentra el perfil de tu Mii, luego busca donde dice “Código de amigo” en la pantalla superior
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Ve a la carpeta Nintendo 3DS en tu tarjeta SD
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Paste your 32-letter folder name into a document you can reference later
-
-
This folder is known as your “ID0”. Take note of this as this guide will refer to it as such later
-
-
-
Power on your console
-
-
Your SD card does not need to be inserted at this point
-
-
-
Go to your Friend List (the orange Face Icon in the top row of your HOME Menu)
-
-
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Encuentra el perfil de tu Mii, luego busca donde dice “Código de amigo” en la pantalla superior
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
-
-
-Multiple long folder names in Nintendo 3DS folder
-
-
-
-
This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. To figure out which long folder name is correct for your 3DS, follow these instructions:
-
-
-
Rename the Nintendo 3DS folder to BACKUP_Nintendo 3DS
-
Reinsert your SD card into your console
-
Power on your console
-
Wait for the console to generate the SD card data
-
-
Your applications will have disappeared. This is normal and will be resolved shortly
-
-
-
Power off your console
-
Inserta tu tarjeta SD en tu computadora
-
Ve a la carpeta Nintendo 3DS en tu tarjeta SD
-
Copy the 32 character long name of the folder you see
-
Rename the BACKUP_Nintendo 3DS folder to Nintendo 3DS
-
-
-
-
-Bruteforce Movable skips to step 4
-
-
El sitio web ya ha minado tu movable.sed usando tu código de amigo y el ID0. Puedes utilizar el movable.sed que te proporciona.
-
-
-
-Important! You have been locked out of the automated part1 dumper system...
-
-
Tu código de amigo fue bloqueado del bot de código de amigo porque tu consola no pudo agregar al bot como amigo. Asegúrate de que tu consola esté correctamente conectada a Internet, luego únete al Discord de Nintendo Homebrew y pide que se te desbloquee.
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
El sitio web ha determinado que tu movable.sed no puede ser minado. Asegúrate de haber escrito correctamente el ID0 en el sitio web. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
-
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
-
-
-
-
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
-
-
-
-
-
-
Your SD card should now look something like this:
-
-
-
-
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
-
-
-
-
-DSiWare Management menu crashes without showing BB3 multihax menu
-
Ensure that F00D43D5.bin is the only file in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. If it is, then re-create it with the Bannerbomb3 Injector.
-
-
Also, ensure that bb3.bin is on the root of the SD card. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.
-
-
If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
-
-
-
-DSiWare Management menu displays "No accessible software data."
-
-
F00D43D5.bin is missing from Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. Asegúrate de que Nintendo DSiWare está correctamente escrito y espaciado. Las mayúsculas/minúsculas no importan.
-
-
-
-DSiWare Management shows a question mark
-
-
Puede haber un problema con el archivo F00D43D5.bin (puede estar corrupto o preparado para otra consola 3DS). Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
-
-
-
Installing boot9strap (Fredtool-Inject)
-
-
-Error on DSiHaxInjector page
-
-
Asegúrate de que tu archivo movable.sed y la copia de seguridad de DSiWare provienen de la misma consola. El error aparece cuando los archivos no coinciden.
-
-
-
-"Haxxxxxxxxx!" does not appear
-
-
Hay un problema con el archivo 42383821.bin (es incorrecto, no está presente, está mal colocado o está corrupto). Re-create your files with the DSIHaxInjector_new website and ensure that you place the 42383821.bin file from output.zip -> hax in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare.
-
-
-
-DSiWare launches normally
-
-
Haxxxxxxxxx! no fue copiado de la tarjeta SD a la memoria de la consola.
-
-
-
-SD card is grayed out in Flipnote
-
-
Flipnote puede tomar mucho tiempo en construir un índice de la tarjeta SD si esta es muy grande. Espera unos minutos.
-
-
-
-Lenny face does not appear in SD card section
-
-
No copiaste la carpeta private del archivo .zip de Frogminer_save a la raíz de la tarjeta SD.
-
-
-
-Flipnote freezes
-
-
Es posible que hayas tocado la pantalla táctil dentro del Flipnote modificado. Vuelve a entrar al menú de Conexiones de Nintendo DS e intenta de nuevo, asegurándote de no tocar la pantalla táctil por accidente.
-
-
-
-Green screen after pasting
-
-
Falta el archivo boot.nds o está fuera de lugar. Descarga la última versión de b9stool y coloca el archivo boot.nds en la raíz de la tarjeta SD, sobreescribiendo el existente.
-
-
-
-White screen after pasting
-
Hay un problema con el archivo boot.nds. Vuelve a descargar la última versión de b9stool y coloca el archivo boot.nds en la raíz de la tarjeta SD, sobreescribiendo el existente.
-
-
-
-Unable to open Luma3DS configuration menu after running B9STool
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
-
-"An exception occurred" or Errdisp when opening Picross
-
-
Your console already has custom firmware. Deberías ir a Comprobación de CFW antes de continuar.
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
-
-Game starts normally
-
-
Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.
If this is unsuccessful, try using another SD card.
-
Installing boot9strap (SSLoth-Browser)
-
-
-Red/purple/pink and white screen after running Browserhax
-
-
This likely indicates that you already have custom firmware. Deberías ir a Comprobación de CFW antes de continuar.
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
The file arm11code.bin is missing or misplaced. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There may be an issue with your arm11code.bin file. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
You can also try resetting your browser save data:
-
-
-
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
-
Try the exploit again
-
-
-
-
-
-Opening the browserhax QR code or URL crashes
-
-
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
-
-
-
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
-
-
-
-"PrepareArm9ForTwl returned error c8804631!"
-
-
Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.
-
-
If this is unsuccessful, try using another SD card.
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-"An error has occurred. Please save your data in any software currently in use, then restart the system."
-
-
The date is set incorrectly. To set it correctly, follow these steps:
-
-
-
Select the System Settings icon on the HOME Menu, and tap Open.
-
Tap Other Settings.
-
Tap Date & Time.
-
Tap Today’s date.
-
Tap Up/Down Arrows to set the correct Day, Month and Year.
-
Select OK to confirm.
-
-
-
If the problem persists:
-
-
-
Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
-
Ensure that you selected the correct payload for your region AND system version
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
-
Try the exploit again
-
-
-
Try changing the system language to something other than the current language
-
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
-
-
-
-
-
-
-An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
-
-
This likely indicates that you already have custom firmware. Deberías ir a Comprobación de CFW antes de continuar.
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -979,6 +571,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1078,7 +679,7 @@ window.cookieconsent.initialise({
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
-
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
+
Try the exploit again
+
+
+
Try changing the system language to something other than the current language
+
+
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
+
+
+
+
+
+
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
+
+
This likely indicates that you already have custom firmware. Deberías ir a Comprobación de CFW antes de continuar.
+
+
+
+
Installing boot9strap (SSLoth-Browser)
+
+
+Red/purple/pink and white screen after running Browserhax
+
+
This likely indicates that you already have custom firmware. Deberías ir a Comprobación de CFW antes de continuar.
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
The file arm11code.bin is missing or misplaced. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
+
+
+
+"An error has occurred, forcing the software to close..." (white message box)
+
+
There may be an issue with your arm11code.bin file. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
+
+
You can also try resetting your browser save data:
+
+
+
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
+
Try the exploit again
+
+
+
+
+
+Opening the browserhax QR code or URL crashes
+
+
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
+
+
+
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. No añadas manualmente la extensión .bin al archivo si ves que no la tiene.
+
+
+
+"PrepareArm9ForTwl returned error c8804631!"
+
+
Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.
+
+
If this is unsuccessful, try using another SD card.
To use the Seedminer exploit, you must update your console to the latest system version.
-
-
What you need
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
El actualizador podría mostrar un mensaje diciendo “La consola ya está actualizada” en lugar de actualizar. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
To use the super-skaterhax exploit, you must update your console to the latest system version.
-
-
What you need
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
El actualizador podría mostrar un mensaje diciendo “La consola ya está actualizada” en lugar de actualizar. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
To use the MSET9 exploit, you must update your console to the latest system version.
-
-
What you need
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
El actualizador podría mostrar un mensaje diciendo “La consola ya está actualizada” en lugar de actualizar. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
Si vous appréciez ce guide, nous acceptons les Dons.
-
-
-
-
-
-
-
-
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
-
-
Installed eShop titles
-
-
Because Nintendo eShop no longer allows purchases, it is no longer possible to purchase new titles. However, you can re-download a title if you had purchased or downloaded them before purchases stopped being possible.
-
-
Any one of the following titles can be used in conjunction with Seedminer to install custom firmware:
-
-
Mario Kart 7 (common preinstalled title; a physical cartridge also works)
-
Pokémon Picross (free-to-play; digital only)
-
Steel Diver: Sub Wars (free-to-play; digital only)
This method requires a compatible DS flashcart to be flashed with ntrboot, which works on all 3DS-family consoles regardless of model or region.
-
-
If none of the above options are available to you, this is the cheapest available option. If you don’t already have a compatible cartridge, a preflashed ntrboot-compatible cartridge can be purchased here for roughly $20 USD.
Si vous appréciez ce guide, nous acceptons les Dons.
-
-
-
-
-
-
-
-
Lecture requise
-
-
Pour extraire un DSiWare système, nous exploitons une faille dans l’onglet de gestion des données DSiWare présent dans les paramètres système.
-
-
Pour ce faire, nous utilisons la clé de chiffrement de votre console (movable.sed) pour créer une sauvegarde DSiWare qui exploite le système pour dumper l’application DSi Internet Settings à la racine SD.
-
-
Une fois que vous avez une sauvegarde DSiWare, un titre DSiWare exploitable peut être injecté dans Téléchargement DS, qui peut être utilisé pour installer un custom firmware.
-
-
Ces instructions sont destinées aux consoles taïwanaises UNIQUEMENT (indiqué par un T à la fin de la version du système, par exemple 11.16.0-39T) ! Si votre console provient d’une autre région, choisissez l’autre méthode.
La dernière version de Frogminer_save (Frogminer_save.zip)
-
-
-
Section I - Vérification de la présence d’un CFW
-
-
Comme mesure de sécurité supplémentaire, nous effectuerons une vérification supplémentaire de la présence d’un custom firmware. Ceci est dû au fait que l’utilisation de cette méthode lorsqu’un custom firmware est déjà installé à un risque de bricker la console (ce qui la rendrait inutilisable sans méthodes de récupération comme ntrboot).
-
-
-
Éteignez votre console
-
Maintenez le bouton (Select) enfoncé
-
Power on your console while still holding the (Select) button
-
Si la vérification a réussi, vous démarrerez sur le menu HOME et vous pourrez continuer avec ce guide
-
Éteignez votre console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Suivez Vérification de la présence d’un CFW pour mettre à jour votre CFW existant.
-
-
Section II - Préparatifs
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Copiez boot.nds (B9STool) de l’archive .zip à la racine de votre carte SD
-
Copiez le dossier private du fichier .zip de Frogminer_save vers la racine de votre carte SD
-
Gardez votre carte SD dans votre ordinateur - Il y a d’autres choses à faire dans la prochaine section
Dans le champ “Username”, entrez n’importe quel nom alphanumérique (sans espaces ni caractères spéciaux)
-
Sous le champ “MovableSed”, uploadez votre movable.sed en utilisant l’option “Choisir un fichier”
-
Cliquez sur “Build”
-
-
Attendez quelques secondes que le processus de compilation soit terminé
-
-
-
Dans la section Historique des builds à gauche, tapez le nom d’utilisateur dans le champ “Filter builds…”
-
Cliquez sur le premier résultat de recherche
-
-
Ce résultat devrait avoir l’horodatage le plus récent
-
-
-
Cliquez sur le lien “output_(name).zip”
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> sur votre carte SD
-
-
<ID0> est le nom du dossier à 32 lettres que vous avez copié dans Seedminer
-
<ID1> est un dossier de 32 caractères à l’intérieur de <ID0>
-
Si vous avez plusieurs dossiers <ID1>, suivez les instructions ici
-
-
-
Créez un dossier nommé Nintendo DSiWare à l’intérieur de <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Ouvrez le fichier output_(name) .zip et accédez à China_Taiwan -> output_setup
-
Copiez les six fichiers “.bin” dans le dossier “Nintendo DSiWare”
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
Launch System Settings on your console
-
Accédez à Gestion des données -> DSiWare -> Carte SD -> (page 2)
-
Prenez note du numéro sur le titre DSiWare sur la deuxième page (ce sera un numéro entre 1 et 6)
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
-
Ouvrez le fichier output_(name) .zip et accédez à China_Taiwan -> output_hax
-
Copiez le fichier .bin portant le même numéro que celui qui se trouvait sur la deuxième page du menu de Gestion des Nintendo DSiWare dans le dossier Nintendo DSiWare et écrasez-le lorsque vous y êtes invité
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Attendez un peu
-
-
The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the console showing an error message and rebooting
-
Si vous n’avez pas vu l’écran violet, alors quelque chose s’est mal passé
-
-
-
Vous devriez maintenant avoir le fichier 42383821.bin à la racine de votre carte SD
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
-
Supprimez tous les fichiers .bin du dossier Nintendo DSiWare
Dans le champ “Username”, entrez n’importe quel nom alphanumérique (sans espaces ni caractères spéciaux)
-
-
Vous devriez mettre un nom différent pour le différencier de la sortie de BannerBomb3
-
-
-
Sous le champ “DSiBin”, uploadez votre fichier 42383821.bin en utilisant la première option “Choisir un fichier”
-
Sous le champ “MovableSed”, uploadez votre fichier movable.sed en utilisant la deuxième option “Choisir un fichier”
-
Sous le champ “InjectionTarget”, définissez la cible d’injection sur DSdownloadplay (PAS memorypit)
-
Cliquez sur “Build”
-
-
Attendez quelques secondes que le processus de compilation soit terminé
-
-
-
Dans la section Historique des builds à gauche, tapez le nom d’utilisateur dans le champ “Filter builds…”
-
Cliquez sur le premier résultat de recherche
-
-
Ce résultat devrait avoir l’horodatage le plus récent
-
-
-
Cliquez sur le lien “output_(name).zip”
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
-
Copiez le fichier 484E4441.bin du dossier hax de l’archive DSiWare téléchargée (output_(name).zip) dans le dossier Nintendo DSiWare
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
Launch System Settings on your console
-
Naviguez versGestion des données -> DSiWare
-
Sous la section “Carte SD”, sélectionnez le titre “Haxxxxxxxxx!”
-
Sélectionnez “Copier”, puis sélectionnez “OK”
-
-
-
Section V - Exploit Flipnote
-
-
Dans cette section, vous allez effectuer une série d’étapes très spécifiques dans Flipnote Studio qui, une fois effectuées correctement, déclencheront le lancement de b9sTool, l’installateur de boot9strap (custom firmware).
-
-
Si vous préférez un guide visuel pour cette section, un tel guide est disponible ici.
-
-
-
Quittez Paramètres de la console
-
Launch Download Play on your console (the orange icon with a 3DS on it)
-
Sélectionnez “Nintendo DS”
-
Si l’exploit a réussi, votre 3DS devrait avoir démarré la version JPN de Flipnote Studio
-
Terminez le processus de configuration initial de Flipnote Studio jusqu’à ce que vous atteigniez le menu principal
-
-
Sélectionnez l’option de gauche chaque fois que vous y êtes invité durant le processus de configuration
En utilisant l’écran tactile, sélectionnez la grande case à gauche, puis sélectionnez la boîte avec une icône de carte SD
-
Une fois le menu lancé, sélectionnez l’icône visage, puis le bouton en bas à droite pour continuer
-
Appuyez sur (X) ou (Haut) sur la croix directionnelle en fonction de ce qui est affiché sur l’écran supérieur
-
Sélectionnez le deuxième bouton en haut avec une icône de bobine de film
-
Défilez vers la droite jusqu’à ce que la bobine “3/3” soit sélectionnée
-
Touchez la troisième case contenant la lettre “A”
-
Défilez vers la gauche jusqu’à ce que la bobine “1/3” soit sélectionnée
-
Touchez la quatrième case contenant la lettre “A”
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section VI - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Séléctionnez “Install boot9strap” en utilisant la croix directionnelle
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Appuyez sur (A), puis appuyez sur START et SELECT en même temps pour démarrer l’installation
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
Vous devrez peut-être forcer l’arrêt de la console en maintenant le bouton Power enfoncé
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section VII - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
Section VIII - Restoring DS Download Play
-
-
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
-
Copiez le fichier 484E4441.bin du dossier clean de l’archive DSiWare téléchargée (output_(nom).zip) dans le dossier Nintendo DSiWare
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
Launch System Settings on your console
-
Naviguez versGestion des données -> DSiWare
-
Sous la section “Carte SD”, sélectionnez le titre “Haxxxxxxxxx!”
-
Sélectionnez “Copier”, puis sélectionnez “OK”
-
Quittez Paramètres de la console
-
Éteignez votre console
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
Pour lancer du code personnalisé, nous exploitons une faille dans la fenêtre de Gestion des Nintendo DSiWare de l’application Paramètres de la console.
-
-
Pour ce faire, nous utilisons la clé de chiffrement de votre console (movable.sed) pour créer une sauvegarde DSiWare qui exploite le système.
-
-
Pour une explication plus technique, consultez cette page.
-
-
-
Notes de compatibilité
-
-
Ces instructions fonctionnent sur les consoles des régions USA, Europe, Japon et Corée, comme indiqué par les lettres U, E, J ou K après la version du logiciel système de la console.
-
-
Si vous possédez une console taïwanaise (indiquée par un T après la version du logiciel système de la console), suivez cette page à la place.
-
-
Ce dont vous avez besoin
-
-
-
Your movable.sed file from completing Seedminer
-
The latest release of BannerBomb3 (Release_v3.0.zip, direct download)
-
-
-
Section I - Préparatifs
-
-
In this section, you will copy the files needed to trigger the BannerBomb3 exploit onto your console’s SD card.
Téléchargez votre movable.sed en utilisant l’option « Choisir un fichier »
-
Cliquez sur “Build and Download”
-
-
This will download an exploit DSiWare called F00D43D5.bin, which will be contained in a zip archive (BannerBomb3.zip)
-
-
-
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
Ce fichier n’a pas besoin d’être ouvert ou extrait
-
-
-
-
Copy Launcher.dat from the folder for your model and region inside the Release .zip to the root of your SD card
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> sur votre carte SD
-
-
<ID0> est le nom du dossier à 32 lettres que vous avez copié dans Seedminer
-
<ID1> est un dossier de 32 caractères à l’intérieur de <ID0>
-
Si vous avez plusieurs dossiers <ID1>, suivez les instructions ici
-
-
-
-
Créez un dossier nommé Nintendo DSiWare à l’intérieur de <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
-
-
-
-
-
Section II - BannerBomb3
-
-
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
-
-
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
-
Your console should show the BB3 multihax menu
-
-
-
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
-
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Oui, vous pouvez toujours installer un custom firmware sur votre 3DS, même après la fermeture de l’eShop.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
-
-
-
-
This method requires a working 3DS camera.
-
-
Ce dont vous avez besoin
-
-
-
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructions
-
-
Section I - Préparatifs
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
-
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - freakyhax
-
-
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
Launch Freakyforms Deluxe
-
In the game menu, select Play -> Camera -> Load a QR code
-
Select the QR code
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Section III - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
-
-
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
Cette méthode d’utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier movable.sed pour déchiffrer n’importe quel titre DSiWare afin d’injecter un titre DSiWare exploitable dans l’application Connexions Nintendo DS.
-
-
Ceci est une implémentation de l’exploit “FIRM partitions known-plaintext” qui est décrit ici.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
La dernière version de Frogminer_save (Frogminer_save.zip)
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
-
-
Section I - Vérification de la présence d’un CFW
-
-
Comme mesure de sécurité supplémentaire, nous effectuerons une vérification supplémentaire de la présence d’un custom firmware. Ceci est dû au fait que l’utilisation de cette méthode lorsqu’un custom firmware est déjà installé à un risque de bricker la console (ce qui la rendrait inutilisable sans méthodes de récupération comme ntrboot).
-
-
-
Éteignez votre console
-
Maintenez le bouton (Select) enfoncé
-
Power on your console while still holding the (Select) button
-
Si la vérification a réussi, vous démarrerez sur le menu HOME et vous pourrez continuer avec ce guide
-
Éteignez votre console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Suivez Vérification de la présence d’un CFW pour mettre à jour votre CFW existant.
-
-
Section II - Préparatifs
-
-
Dans cette section, vous copierez les fichiers nécessaires pour remplacer temporairement Connexions Nintendo DS par Flipnote Studio, qui est utilisé pour lancer l’installateur de boot9strap (custom firmware).
Dans le champ “Username”, entrez n’importe quel nom alphanumérique (sans espaces ni caractères spéciaux)
-
Dans le champ “DSiBin”, téléchargez votre fichier DSiWare (par exemple 42383841.bin) depuis la racine de votre carte SD en utilisant la première option “Choisir un fichier”
-
Sous le champ “MovableSed”, uploadez votre fichier movable.sed en utilisant la deuxième option “Choisir un fichier”
-
Dans le champ “InjectionTarget”, définissez la cible d’injection à DSinternet (PAS memorypit)
-
Cliquez sur “Build”
-
-
Attendez quelques secondes que le processus de compilation soit terminé
-
-
-
Dans la section Historique des builds à gauche, tapez le nom d’utilisateur dans le champ “Filter builds…”
-
Cliquez sur le premier résultat de recherche
-
-
Ce résultat devrait avoir l’horodatage le plus récent
-
-
-
Cliquez sur le lien “output_(name).zip”
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
-
-
<ID0> est le nom du dossier à 32 lettres que vous avez copié dans Seedminer
-
<ID1> est un dossier de 32 caractères à l’intérieur de <ID0>
-
-
-
Copiez le fichier 42383841.bin depuis le dossier hax de l’archive DSiWare téléchargée (output_(name).zip) vers le dossier Nintendo DSiWare
-
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Copiez boot.nds (B9STool) de l’archive .zip à la racine de votre carte SD
-
Copiez le dossier private du fichier .zip de Frogminer_save vers la racine de votre carte SD
-
Réinsérez votre carte SD dans votre console
-
-
Power on your console
-
-
-
-
-
-
Section III - Overwriting DS Connection Settings
-
-
Dans cette section, vous copierez le DSiWare hacké de Connexions Nintendo DS dans la mémoire interne, qui le remplacera temporairement par Flipnote Studio.
-
-
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
Dans cette section, vous allez effectuer une série d’étapes très spécifiques dans Flipnote Studio qui, une fois effectuées correctement, déclencheront le lancement de b9sTool, l’installateur de boot9strap (custom firmware).
-
-
Si vous préférez un guide visuel pour cette section, un tel guide est disponible ici.
-
-
-
Retournez au menu principal des Paramètres de la console
-
Naviguez vers Paramètres Internet -> Connexions Nintendo DS, puis sélectionnez “OK” (image)
-
If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
-
En utilisant l’écran tactile, sélectionnez la grande case à gauche, puis sélectionnez la boîte avec une icône de carte SD
-
Une fois le menu lancé, sélectionnez l’icône visage, puis le bouton en bas à droite pour continuer
-
Appuyez sur (X) ou (Haut) sur la croix directionnelle en fonction de ce qui est affiché sur l’écran supérieur
-
Sélectionnez le deuxième bouton en haut avec une icône de bobine de film
-
Défilez vers la droite jusqu’à ce que la bobine “3/3” soit sélectionnée
-
Touchez la troisième case contenant la lettre “A”
-
Défilez vers la gauche jusqu’à ce que la bobine “1/3” soit sélectionnée
-
Touchez la quatrième case contenant la lettre “A”
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section V - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Séléctionnez “Install boot9strap” en utilisant la croix directionnelle
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Appuyez sur (A), puis appuyez sur START et SELECT en même temps pour démarrer l’installation
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
Vous devrez peut-être forcer l’arrêt de la console en maintenant le bouton Power enfoncé
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section VI - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
-
-
-
Section VII - Restoring DS Connection Settings
-
-
Dans cette section, vous allez restaurer Connexions Nintendo DS comme il était avant d’être remplacé temporairement par Flipnote Studio dans une section précédente.
-
-
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
-
Copiez le fichier 42383841.bin depuis le dossier clean de l’archive DSiWare téléchargée (output_(nom).zip) dans le dossier Nintendo DSiWare
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Once we have movable.sed, we can edit the SD card data of the game Mario Kart 7 to install menuhax67, which will allow us to get Homebrew Launcher access.
-
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-
See here for information about Kartminer7, here for information about menuhax67, and here for information about nimdsphax.
-
-
-
-
Ce dont vous avez besoin
-
-
-
A physical or digital copy of Mario Kart 7 updated to the latest version (v1.2)
-
-
You can update Mario Kart 7 from eShop or by following the update prompt when you launch the game
-
-
-
A computer running Windows, macOS, or Linux
-
Your movable.sed file from completing Seedminer
-
The latest release of Kartminer7 (the release marked WINDOWS if you have a Windows computer, or the release marked LINUX-macOS if you have a macOS or Linux-based computer)
-
La dernière version de boot9strap (téléchargement direct)
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
-
-
Section I - Preparing Mario Kart 7 data
-
-
In this section, you will have the 3DS generate some data in Mario Kart 7 that will be used to install the exploit in a later section.
-
-
-
Réinsérez votre carte SD dans votre console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
If you are prompted to, hit “Next” and “OK” to all of the prompts that you see
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press the (Home) button to suspend Mario Kart 7
-
Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
-
Éteignez votre console
-
-
-
Section II - SD Card Prep Work
-
-
-
Insérez votre carte SD dans votre ordinateur
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
-
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
-
Keep your SD card inserted in your computer, as it is still required in the next section
-
-
-
-
-
-
-
Section III - Installing Kartminer7
-
-
-
Extract the Release_BETA_mk7 .zip to somewhere on your computer (i.e. your desktop)
-
Copy your movable.sed file to the resources folder of the Release_BETA_mk7 folder
-
-
Ensure that the file is named exactly movable.sed
-
-
-
Open the backup folder inside of the Release_BETA_mk7 folder
-
Double-click on the BACKUP file corresponding to your console’s region (e.g. backup_USA if you have a USA copy of Mario Kart 7)
-
-
If you are unsure of your console region, you can check System Settings. U = USA; E = EUR, J = JPN
-
If you get a message from Windows Defender, click “More info”, “Run anyway”, then press any key to continue
-
If the backup was successful, you should see a new folder appear
-
If you wish to restore this data at a later date (after finishing this guide), insert your SD card and double-click on the RESTORE file corresponding to your console’s region
-
-
-
Go back to the Release_BETA_mk7 folder, then double-click on the file corresponding to your console’s region (e.g. USA if you have a USA copy of Mario Kart 7)
-
Réinsérez votre carte SD dans votre console
-
-
-
Section IV - Kartminer7
-
-
-
Power on your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press (A) over and over again
-
-
You should eventually see the “Start Race?” prompt, then the colours on the bottom screen should change from red, to blue, to white
-
If you see the red/blue/white screens but the 3DS crashes, just reboot and try again
-
If you don’t see ANY colours, change your system language (if possible), then try the exploit again
-
-
-
If the exploit was successful, the 3DS will have booted into the 3DS ROP xPloit Injector
-
-
-
Section V - Installing menuhax67
-
-
-
Press (Y) + (D-Pad Down) to install menuhax67
-
-
The console will automatically power off
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
-
-
-
-
-
Section VI - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
-
-
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
Section VII - Removing menuhax67
-
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
-
-
-
Lancez l’application Mode téléchargement ()
-
Attendez jusqu’à ce que vous voyiez les boutons Nintendo 3DS et Nintendo DS
-
Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina
-
Sélectionnez “Miscellaneous options”
-
Sélectionnez “Switch the hb. title to the current app.”
-
Appuyez sur (B) pour continuer
-
Appuyez sur (B) pour revenir au menu principal de Rosalina
-
Appuyez sur (B) pour quitter le menu Rosalina
-
Appuyez sur (HOME), pour mettre Mode téléchargement en suspens
-
Appuyez sur le bouton “Quitter” sur l’écran du bas pour fermer Mode téléchargement
-
Relancez l’application Mode téléchargement
-
Your console should load the Homebrew Launcher
-
-
If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
-
-
-
Launch menuhax67_installer from the list of homebrew
-
Select REMOVE menuhax67
-
When you see “done.”, press (A), then press (A) on “EXIT to menu”
-
-
-
At this point, you can re-enable wireless communications.
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
-
-
Section I - Préparatifs
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
-
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Réinsérez votre carte SD dans votre console
-
-
-
-
-
-
-
-
-
Section II - menuhax67
-
-
In this section you will use the menuhax67 exploit installed earlier to launch nimdsphax, which will load SafeB9SInstaller.
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Section III - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
-
-
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
Section IV - Removing menuhax67
-
-
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
-
-
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
-
-
Your console will automatically reboot
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Naviguez vers Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare sur votre carte SD
-
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
This method requires a computer running Windows, Linux, or macOS. Phones or tablets are NOT currently supported. If you do not have access to a computer, you will need to use an alternate exploit.
+
This method requires a computer running Windows, Linux, or macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
-
-
-
This method requires a working 3DS camera.
-
-
This process will overwrite your Cubic Ninja save file, if you have one.
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
-
-
Instructions
-
-
Section I - Préparatifs
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Copy Launcher.dat from the folder appropriate for your console from the ninjhax2-dx .zip file to the root of your SD card
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
-
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
If the game exits to the HOME Menu, then the exploit has installed correctly
-
-
-
Launch “Cubic Ninja” again
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Section III - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
-
-
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
We use petit-compwner to launch b9sTool, which installs boot9strap.
-
-
See here for more information about petit-compwner.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
-
-
Ce dont vous avez besoin
-
-
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
-
-
Section I - Vérification de la présence d’un CFW
-
-
Comme mesure de sécurité supplémentaire, nous effectuerons une vérification supplémentaire de la présence d’un custom firmware. Ceci est dû au fait que l’utilisation de cette méthode lorsqu’un custom firmware est déjà installé à un risque de bricker la console (ce qui la rendrait inutilisable sans méthodes de récupération comme ntrboot).
-
-
-
Éteignez votre console
-
Maintenez le bouton (Select) enfoncé
-
Power on your console while still holding the (Select) button
-
Si la vérification a réussi, vous démarrerez sur le menu HOME et vous pourrez continuer avec ce guide
-
Éteignez votre console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Suivez Vérification de la présence d’un CFW pour mettre à jour votre CFW existant.
-
-
Section II - Préparatifs
-
-
In this section, you will copy the files necessary to launch b9sTool, which is used to launch the boot9strap (custom firmware) installer.
-
-
-
Insérez votre carte SD dans votre ordinateur
-
Copiez boot.nds (B9STool) de l’archive .zip à la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
Réinsérez votre carte SD dans votre console
-
-
Power on your console
-
-
-
-
-
-
Section III - petit-compwner
-
-
In this section, you will scan the QR codes needed to trigger the petit-compwner exploit.
-
-
-
Open the latest release of petit-compwner on your computer
-
On your console, launch Petit Computer
-
Select File Management
-
Select Read QR Codes
-
Scan each QR code in order, from 1/5 to 5/5
-
Once you have scanned all the QR codes, exit File Management
-
Select View Gallery
-
Launch the PWN program
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section IV - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Séléctionnez “Install boot9strap” en utilisant la croix directionnelle
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Appuyez sur (A), puis appuyez sur START et SELECT en même temps pour démarrer l’installation
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
Vous devrez peut-être forcer l’arrêt de la console en maintenant le bouton Power enfoncé
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section V - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
Ce dont vous avez besoin
-
-
-
The game “Pokémon Picross” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Pokémon Picross
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructions
-
-
Section I - Préparatifs
-
-
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
-
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
-
-
-
-
-
-
-
-
Section II - PicHaxx
-
-
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Section III - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
-
-
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
Si vous appréciez ce guide, nous acceptons les Dons.
-
-
-
-
-
-
-
-
This set of instructions does not support the Japanese version of SmileBASIC. The guide for that version can be found here.
-
-
-Détails techniques (facultatif)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
Ce dont vous avez besoin
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructions
-
-
Section I - Préparatifs
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
-
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Copy the petitcom .icn for your region to the root of your SD card
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
Update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
-
-
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
-
-
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Section III - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
-
-
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
Si vous appréciez ce guide, nous acceptons les Dons.
-
-
-
-
-
-
-
-
This set of instructions does not support the USA and EUR versions of SmileBASIC. The guide for those versions can be found here.
-
-
-Détails techniques (facultatif)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
Ce dont vous avez besoin
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructions
-
-
Section I - Préparatifs
-
-
Make sure SmileBASIC is updated to the latest version
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
-
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
DO NOT update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Section III - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
-
-
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
Ce dont vous avez besoin
-
-
-
The game “Steel Diver: Sub Wars” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
La dernière version de Luma3DS (le fichier `.zip’ de Luma3DS)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructions
-
-
Section I - Préparatifs
-
-
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Copiez boot.firm et boot.3dsx depuis Luma3DS .zipvers la racine de votre carte SD
-
-
La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n’est pas à l’intérieur de ce dernier
-
-
-
Créez un dossier nommé boot9strap à la racine de votre carte SD
-
Copiez boot9strap.firm et boot9strap.firm.sha depuis le fichier “.zip” de boot9strap vers le dossier /boot9strap/ sur votre carte SD
-
Copiez SafeB9SInstaller.bin depuis le fichier .zip de SafeB9SInstaller à la racine de votre carte SD
-
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card and rename it to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Créez un dossier nommé 3ds à la racine de votre carte SD si celui ci n’existe pas
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - Steelminer
-
-
In this section, you will create a hacked Steel Diver: Sub Wars save file that, when used, will load the Homebrew Launcher on your console.
-
-
-
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
-
-
Decline the game update when prompted
-
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> <8-character-region> -> data on your SD card
-
-
EUR Region: 000d7e00
-
JPN Region: 000d7c00
-
USA Region: 000d7d00
-
-
-
Copy the newly downloaded 00000001.sav file to the data folder on your SD card
-
-
Overwrite the old save file when prompted
-
-
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
Launch “Steel Diver: Sub Wars”
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Si l’exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Section III - Installation de boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l’écran supérieur pour installer boot9strap
-
-
Si une étape sur l’écran du bas a du texte rouge, et que vous n’êtes pas invité à entrer une combinaison de touches, suivez ce guide de dépannage
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Le menu de configuration de Luma3DS sert à régler les paramètres du custom firmware Luma3DS. Beaucoup de ces paramètres peuvent être utiles pour la personnalisation ou le débogage
-
Pour les besoins de ce guide, laissez ces options sur les paramètres par défaut (ne cochez ni ne décochez rien)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Appuyez sur (Start) pour enregistrer les modifications et redémarrer
-
-
-
À partir d’ici, votre console démarrera sur Luma3DS par défaut.
-
-
Luma3DS ne présente aucune différence visuelle avec le menu HOME normal. Si votre console a démarré dans le menu HOME, elle exécute un custom firmware.
-
Sur la page suivante, vous installerez des applications homebrew utiles pour compléter votre configuration.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Lisez attentivement cette page s’il s’agit de la première fois que vous hackez une 3DS (ou si vous n’êtes pas familier avec la technologie en général) ! Si vous savez ce que vous faites et que vous avez une expérience antérieure, continuez vers Bien démarrer.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Pour plus d’informations sur le fonctionnement de Seedminer, regardez cette présentation.
-
-
Cette méthode utilise une carte graphique puissante pour effectuer les calculs nécessaires. Un site Web géré par des bénévoles est utilisé pour vous aider à utiliser cette méthode.
-
-
-
-
Section I - Préparatifs
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Avant de suivre cette section :
-
-
Assurez-vous d’avoir allumé votre console avec la carte SD insérée au moins une fois pour générer les données nécessaires
-
Assurez-vous que votre console est connectée à Internet (vous devriez voir un indicateur bleu « Internet » dans le coin supérieur gauche du Menu HOME)
-
-
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Naviguez vers le dossier Nintendo 3DS de votre carte SD
-
Copiez le nom du dossier de 32 lettres que vous voyez directement à l’intérieur du dossier Nintendo 3DS
-
-
Ce nom de 32 lettres est propre à votre console et sera différent pour chaque console
-
Si vous voyez plusieurs dossiers de 32 lettres, suivez ces instructions
-
Vous pouvez ignorer le dossier private si vous en avez un
-
-
-
-
-
Collez votre nom de dossier de 32 lettres dans un document auquel vous pourrez vous référer ultérieurement
-
-
Ce dossier représente votre “ID0”. Prenez note de cela car ce guide y fera référence plus tard
-
-
-
Power on your console
-
-
Votre carte SD n’a pas besoin d’être insérée à ce stade
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Trouvez le profil de votre Mii, puis trouvez le champ “Code ami” sur l’écran supérieur
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
Si le site ne fonctionne pas, rejoignez Nintendo Homebrew sur Discord et demandez (en anglais) que quelqu’un vous aide
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
N’essayez pas d’entrer manuellement l’ID0, car il est facile de faire une erreur. Assurez-vous que l’ID0 est correctement entré en le copiant et en le collant depuis l’endroit où vous l’avez enregistré dans la section précédente
-
-
-
Sélectionnez “Go”
-
-
Si le site va immédiatement à l’étape 4, le site Web a déjà traité correctement votre demande de force brute. Vous pouvez télécharger votre fichier movable.sed et continuer vers la section suivante. Vous n’avez pas besoin de rajouter le bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
Si vous y êtes invité, le nom que vous donnez à l’ami n’a pas d’importance
-
-
-
Attendez que le site se mette à jour
-
-
Si il ne se met pas à jour, attendez quelques minutes avant de rafraîchir la page une fois
-
-
-
Une fois que le site a fini de traiter vos informations, le site continuera à Step 2: Bruteforce automatiquement
-
Veuillez attendre que le reste du processus soit achevé
-
-
Ceci est généralement rapide (1-5 minutes)
-
Au cours de ce processus, le bot que vous avez ajouté peut ne pas apparaître sur votre 3DS. Tant que le site se met à jour, ce n’est pas un problème
-
Si vous êtes toujours en train d’attendre après une demi-heure, veuillez rejoindre Nintendo Homebrew sur Discord et demandez (en anglais) à quelqu’un de vous aider
-
Si vous obtenez le message suivant : “We were unable to successfully complete your bruteforce request. :`(“, suivez les instructions de dépannage sur cette page
-
-
-
When the process is completed, download your movable.sed file from the site
-
-
Gardez ce fichier car vous en aurez besoin dans la prochaine page
-
-
-
Éteignez votre console
-
-
-
-
-
Next steps
-
-
Select the method based on the application that you have installed on your 3DS. No matter which method you pick, the end result will be the same.
-
-
Mario Kart 7
-
-
This method uses a cartridge or digital copy of Mario Kart 7. Using the movable.sed file, you can modify Mario Kart 7’s SD card data that will give you access to Homebrew Launcher, which will be used for further exploitation.
If you own any DSiWare title on your 3DS, you can dump it to the SD card so that it can be used to temporarily inject Flipnote into DS Connection Settings.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
Si vous appréciez ce guide, nous acceptons les Dons.
-
-
-
-
-
-
-
-
-
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don’t know what those are or do not have the hardware necessary, join Nintendo Homebrew on Discord, open the “#mii-mining-assistance” channel and provide the following:
-
-
Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
-
Your console’s ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see this troubleshooting section if you have multiple)
-
Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
Your console’s year of manufacturing; if you don’t know, don’t say it - it’s not super important
-
-
-
-
-Détails techniques (facultatif)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Because we do not have access to the Friends List, we are deriving the first part of movable.sed using a Mii QR code instead of by performing a two-way friend exchange.
-
-
Pour plus d’informations sur le fonctionnement de Seedminer, regardez cette présentation.
-
-
-
-
Instructions
-
-
If you are on Linux or macOS, replace py -3 with python3 in all commands.
-
-
Ce dont vous avez besoin
-
-
-
The latest release of Seedminer (the Seedminer .zip)
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
-
-
-
-
-
Section I - Préparatifs
-
-
In this section, you will set up Seedminer and obtain your console’s files that are needed for mining.
-
-
-
Extract the contents of the Seedminer .zip and move the folder with your operating system’s name to anywhere on your computer
-
-
Keep this location handy, as this Seedminer folder will be where multiple other files are placed
-
-
-
In the Seedminer folder, hold SHIFT and right-click anywhere in the folder’s empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
-
In the command line window, type py -3 -m pip install pycryptodomex, hit ENTER, and allow it to install
-
-
If this command fails with the error No module named pip, you must manually install pip. The methods to do this can be found on this page.
-
-
-
Power on your console while the SD card is inserted
-
Open the Mii Maker app
-
Tap the “QR Code/Image Options” button
-
Tap “Save Mii as QR Code”
-
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Naviguez vers le dossier Nintendo 3DS de votre carte SD
-
Copiez le nom du dossier de 32 lettres que vous voyez directement à l’intérieur du dossier Nintendo 3DS
-
-
Ce nom de 32 lettres est propre à votre console et sera différent pour chaque console
-
Si vous voyez plusieurs dossiers de 32 lettres, suivez ces instructions
-
Vous pouvez ignorer le dossier private si vous en avez un
-
-
-
-
-
Collez votre nom de dossier de 32 lettres dans un document auquel vous pourrez vous référer ultérieurement
-
-
Ce dossier représente votre “ID0”. Prenez note de cela car ce guide y fera référence plus tard
-
-
-
Navigate to the DCIM folder on the SD card
-
Look for the QR Code, which will be a .JPG file starting with HNI
-
-
You may have many other files in here already if you use the Nintendo 3DS Camera app
-
-
-
Copy this file to the Seedminer folder on your computer
-
-
-
Section II - Processing Mii QR and Mining
-
-
In this section, you will turn the Mii QR code into a usable file and mine movable.sed with it.
Click on “Import from…”, then select “QR Code” and upload the Mii QR code from earlier
-
Click on “Export to…”, then select “encrypted (.bin)”
-
-
This will download a file named input.bin
-
-
-
Copy this input.bin to the Seedminer folder
-
Open the terminal/PowerShell/Command Prompt window from earlier
-
Inside this window, enter the command py -3 seedminer_launcher3.py id0 <id0>
-
-
Replace <id0> with the ID0 you copied into a document
-
Do not include the angle brackets
-
N’essayez pas d’entrer manuellement l’ID0, car il est facile de faire une erreur. Assurez-vous que l’ID0 est correctement entré en le copiant et en le collant depuis l’endroit où vous l’avez enregistré dans la section précédente
-
-
-
Once it completes, enter the command py -3 seedminer_launcher3.py mii <model> <year>
-
-
Replace <model> with the model of your console (new or old) - if you aren’t sure, only models with the ZL/ZR buttons and C-Stick are “new”
-
Replace <year> with the year the 3DS was made (On Old 3DS consoles, the years on the backplate, (M)2010/(C)2011, are always the same and NOT an indicator) - if you aren’t sure, see below
-
Estimate manufacturing years are: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
You can also leave the year empty, which will make it start in the middle
-
The mining process will usually take up to 90 minutes, depending on luck and your GPU’s strength
-
The first stage will likely max out at roughly offset 1500, depending on console model
-
If the second stage (after seeing movable_part2.sed generation success) gets past offset 100, verify that you input the correct ID0. If your ID0 is correct, you cannot use this method and will have to update to the latest version and see if a non-Seedminer method is available for you here
-
If you see the message input.bin is invalid size, remake the input.bin using your QR Code. If it still fails, open a different browser and remake the input.bin there
-
If you see the message LFCS has been left blank, use the opposite console model (e.g. mii old instead of mii new)
-
-
-
When it finishes, a file called movable.sed will appear in the Seedminer folder
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Pour plus d’informations sur le fonctionnement de Seedminer, regardez cette présentation.
-
-
Cette méthode utilise une carte graphique puissante pour effectuer les calculs nécessaires. Un site Web géré par des bénévoles est utilisé pour vous aider à utiliser cette méthode.
-
-
-
-
Section I - Préparatifs
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Avant de suivre cette section :
-
-
Assurez-vous d’avoir allumé votre console avec la carte SD insérée au moins une fois pour générer les données nécessaires
-
Assurez-vous que votre console est connectée à Internet (vous devriez voir un indicateur bleu « Internet » dans le coin supérieur gauche du Menu HOME)
-
-
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Naviguez vers le dossier Nintendo 3DS de votre carte SD
-
Copiez le nom du dossier de 32 lettres que vous voyez directement à l’intérieur du dossier Nintendo 3DS
-
-
Ce nom de 32 lettres est propre à votre console et sera différent pour chaque console
-
Si vous voyez plusieurs dossiers de 32 lettres, suivez ces instructions
-
Vous pouvez ignorer le dossier private si vous en avez un
-
-
-
-
-
Collez votre nom de dossier de 32 lettres dans un document auquel vous pourrez vous référer ultérieurement
-
-
Ce dossier représente votre “ID0”. Prenez note de cela car ce guide y fera référence plus tard
-
-
-
Power on your console
-
-
Votre carte SD n’a pas besoin d’être insérée à ce stade
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Trouvez le profil de votre Mii, puis trouvez le champ “Code ami” sur l’écran supérieur
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
Si le site ne fonctionne pas, rejoignez Nintendo Homebrew sur Discord et demandez (en anglais) que quelqu’un vous aide
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
N’essayez pas d’entrer manuellement l’ID0, car il est facile de faire une erreur. Assurez-vous que l’ID0 est correctement entré en le copiant et en le collant depuis l’endroit où vous l’avez enregistré dans la section précédente
-
-
-
Sélectionnez “Go”
-
-
Si le site va immédiatement à l’étape 4, le site Web a déjà traité correctement votre demande de force brute. Vous pouvez télécharger votre fichier movable.sed et continuer vers la section suivante. Vous n’avez pas besoin de rajouter le bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
Si vous y êtes invité, le nom que vous donnez à l’ami n’a pas d’importance
-
-
-
Attendez que le site se mette à jour
-
-
Si il ne se met pas à jour, attendez quelques minutes avant de rafraîchir la page une fois
-
-
-
Une fois que le site a fini de traiter vos informations, le site continuera à Step 2: Bruteforce automatiquement
-
Veuillez attendre que le reste du processus soit achevé
-
-
Ceci est généralement rapide (1-5 minutes)
-
Au cours de ce processus, le bot que vous avez ajouté peut ne pas apparaître sur votre 3DS. Tant que le site se met à jour, ce n’est pas un problème
-
Si vous êtes toujours en train d’attendre après une demi-heure, veuillez rejoindre Nintendo Homebrew sur Discord et demandez (en anglais) à quelqu’un de vous aider
-
Si vous obtenez le message suivant : “We were unable to successfully complete your bruteforce request. :`(“, suivez les instructions de dépannage sur cette page
-
-
-
When the process is completed, download your movable.sed file from the site
-
-
Gardez ce fichier car vous en aurez besoin dans la prochaine page
-
-
-
Éteignez votre console
-
-
-
-
-
Étape suivante : BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Pour plus d’informations sur le fonctionnement de Seedminer, regardez cette présentation.
-
-
Cette méthode utilise une carte graphique puissante pour effectuer les calculs nécessaires. Un site Web géré par des bénévoles est utilisé pour vous aider à utiliser cette méthode.
-
-
-
-
Section I - Préparatifs
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Avant de suivre cette section :
-
-
Assurez-vous d’avoir allumé votre console avec la carte SD insérée au moins une fois pour générer les données nécessaires
-
Assurez-vous que votre console est connectée à Internet (vous devriez voir un indicateur bleu « Internet » dans le coin supérieur gauche du Menu HOME)
-
-
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Naviguez vers le dossier Nintendo 3DS de votre carte SD
-
Copiez le nom du dossier de 32 lettres que vous voyez directement à l’intérieur du dossier Nintendo 3DS
-
-
Ce nom de 32 lettres est propre à votre console et sera différent pour chaque console
-
Si vous voyez plusieurs dossiers de 32 lettres, suivez ces instructions
-
Vous pouvez ignorer le dossier private si vous en avez un
-
-
-
-
-
Collez votre nom de dossier de 32 lettres dans un document auquel vous pourrez vous référer ultérieurement
-
-
Ce dossier représente votre “ID0”. Prenez note de cela car ce guide y fera référence plus tard
-
-
-
Power on your console
-
-
Votre carte SD n’a pas besoin d’être insérée à ce stade
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Trouvez le profil de votre Mii, puis trouvez le champ “Code ami” sur l’écran supérieur
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
Si le site ne fonctionne pas, rejoignez Nintendo Homebrew sur Discord et demandez (en anglais) que quelqu’un vous aide
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
N’essayez pas d’entrer manuellement l’ID0, car il est facile de faire une erreur. Assurez-vous que l’ID0 est correctement entré en le copiant et en le collant depuis l’endroit où vous l’avez enregistré dans la section précédente
-
-
-
Sélectionnez “Go”
-
-
Si le site va immédiatement à l’étape 4, le site Web a déjà traité correctement votre demande de force brute. Vous pouvez télécharger votre fichier movable.sed et continuer vers la section suivante. Vous n’avez pas besoin de rajouter le bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
Si vous y êtes invité, le nom que vous donnez à l’ami n’a pas d’importance
-
-
-
Attendez que le site se mette à jour
-
-
Si il ne se met pas à jour, attendez quelques minutes avant de rafraîchir la page une fois
-
-
-
Une fois que le site a fini de traiter vos informations, le site continuera à Step 2: Bruteforce automatiquement
-
Veuillez attendre que le reste du processus soit achevé
-
-
Ceci est généralement rapide (1-5 minutes)
-
Au cours de ce processus, le bot que vous avez ajouté peut ne pas apparaître sur votre 3DS. Tant que le site se met à jour, ce n’est pas un problème
-
Si vous êtes toujours en train d’attendre après une demi-heure, veuillez rejoindre Nintendo Homebrew sur Discord et demandez (en anglais) à quelqu’un de vous aider
-
Si vous obtenez le message suivant : “We were unable to successfully complete your bruteforce request. :`(“, suivez les instructions de dépannage sur cette page
-
-
-
When the process is completed, download your movable.sed file from the site
-
-
Gardez ce fichier car vous en aurez besoin dans la prochaine page
-
-
-
Éteignez votre console
-
-
-
-
-
Étape suivante : BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
-
-
-Présence de plusieurs dossiers ayant un long nom dans le dossier Nintendo 3DS
-
-
-
-
This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. Pour déterminer quel nom de dossier long correspond à votre 3DS, suivez ces instructions :
-
-
-
Renommez le dossier Nintendo 3DS en BACKUP_Nintendo 3DS
-
Réinsérez votre carte SD dans votre console
-
Power on your console
-
Wait for the console to generate the SD card data
-
-
Vos applications auront disparu. Ceci est normal et sera résolu plus tard
-
-
-
Éteignez votre console
-
Insérez votre carte SD dans votre ordinateur
-
Naviguez vers le dossier Nintendo 3DS de votre carte SD
-
Copiez le nom du dossier qui fait 32 caractères de long que vous voyez
-
Renommez le dossier BACKUP_Nintendo 3DS en `Nintendo 3DS
-
-
-
-
-Bruteforce Movable passe à l'étape 4
-
-
Le site Web a déjà extrait votre movable.sed en utilisant la combinaison de votre code ami et de votre ID0. Vous pouvez utiliser le movable.sed qu’il vous fournit.
-
-
-
-Important! You have been locked out of the automated part1 dumper system...
-
-
Votre code ami a été bloqué par le bot car votre 3DS n’a pas réussi à ajouter le bot en ami. Assurez-vous que votre 3DS est correctement connectée à Internet, puis rejoignez Nintendo Homebrew sur Discord et demandez à ce que votre code ami soit dé-banni.
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
Le site Web a déterminé que votre movable.sed ne peut pas être forcé. Assurez-vous que vous avez donné le bon ID0 au site Web. Si votre ID0 est correct, vous ne pourrez pas utiliser Seedminer et vous devrez utiliser une autre méthode.
-
-
-Présence de plusieurs dossiers ID1 à l'intérieur de ID0
-
-
-
-
This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
-
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
-
-
-
-
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
-
-
-
-
-
-
Your SD card should now look something like this:
-
-
-
-
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
-
-
-
-
-Le menu de Gestion des Nintendo DSiWare plante sans afficher le menu multihax BB3
-
Assurez-vous que F00D43D5.bin est le seul fichier dans Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. If it is, then re-create it with the Bannerbomb3 Injector.
-
-
Assurez-vous également que bb3.bin est à la racine de la carte SD. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.
-
-
If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. Si c’est le cas, rejoignez Nintendo Homebrew sur Discord et demandez de l’aide, en anglais.
-
-
-
-Le menu de Gestion des Nintendo DSiWare affiche "Aucune donnée."
-
-
F00D43D5.bin est absent dans Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. Assurez-vous que Nintendo DSiWare est correctement orthographié et espacé. Les majuscules/minuscules n’ont pas d’importance.
-
-
-
-Le menu de Gestion des Nintnedo DSiWare affiche un point d'interrogation
-
-
Il y a peut-être un problème avec votre fichier F00D43D5.bin (il peut être corrompu ou destiné à la mauvaise 3DS). Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
-
-
-
Installing boot9strap (Fredtool-Inject)
-
-
-Error on DSiHaxInjector page
-
-
Assurez-vous que votre movable.sed et votre sauvegarde de DSiWare proviennent de la même console. Une incohérence entraînera une erreur.
-
-
-
-"Haxxxxxxxxx!" n'apparaît pas
-
-
Il y a un problème avec votre fichier 42383821.bin (il est incorrect, manquant, mal placé ou corrompu). Recréez vos fichiers avec le site web DSIHaxInjector_new et assurez-vous de placer le fichier 42383821.bin depuis output.zip -> hax dans Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare.
-
-
-
-DSiWare launches normally
-
-
Haxxxxxxxxx! n’a pas été copié depuis votre carte SD vers la mémoire de votre console.
-
-
-
-La carte SD est grisée dans Flipnote
-
-
Flipnote peut prendre beaucoup de temps pour indexer votre carte si vous avez une grande carte SD. Attendez quelques minutes.
-
-
-
-La Lenny face n'apparaît pas dans la section carte SD
-
-
Vous n’avez pas copié le dossier private du fichier .zip de Frogminer_save vers la racine de votre carte SD.
-
-
-
-Flipnote plante
-
-
Vous avez peut-être accidentellement touché l’écran tactile alors que vous étiez dans le Flipnote modifiée. Entrez à nouveau les paramètres de Connexions Nintendo DS et réessayez, en vous assurant de ne pas toucher accidentellement l’écran tactile.
-
-
-
-Écran vert après avoir collé
-
-
Le fichier boot.nds est absent ou mal placé. Téléchargez la dernière version de b9stool et placez boot.nds à la racine de votre carte SD, en remplaçant l’ancien.
-
-
-
-Écran blanc après avoir collé
-
Il y a un problème avec votre fichier boot.nds. Re-téléchargez la dernière version de b9stool et placez boot.nds à la racine de votre carte SD, en remplaçant l’ancien.
-
-
-
-Impossible d'ouvrir le menu de configuration de Luma3DS après avoir exécuté B9STool
-
-
-
-
-"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..." (écran noir avec texte)
-
-
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
-
-"An exception occurred" or Errdisp when opening Picross
-
-
-
-
-
-"Le logiciel a été arrêté car une erreur est survenue. La console va redémarrer." (boîte de message blanche)
-
-
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
-
-Game starts normally
-
-
Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.
-
-
-
-"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..." (écran noir avec texte)
-
-
Le fichier arm11code.bin est absent ou mal placé. Téléchargez la dernière version de universal-otherapp, placez otherapp.bin à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
-
-"Le logiciel a été arrêté car une erreur est survenue. La console va redémarrer." (boîte de message blanche)
-
-
Il y a peut-être un problème avec votre fichier arm11code.bin. Téléchargez la dernière version de universal-otherapp, placez otherapp.bin à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
You can also try resetting your browser save data:
-
-
-
Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
-
Retentez l’exploit
-
-
-
-
-
-L'ouverture du QR code ou de l'URL de browserhax plante
-
-
Les exploits basés sur le Navigateur Internet (comme celui-ci) sont souvent instables et plantent fréquemment, mais ils peuvent parfois être corrigés en effectuant les étapes suivantes.
-
-
-
Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
-
Retentez l’exploit
-
-
-
-
-Demande de mise à jour de la console lors de l'ouverture du Navigateur Internet
-
-
Le proxy SSLoth a été mal configuré. Refaites la section SSLoth de la page.
-
-
-
-Erreur 032-0420 lors de l'ouverture du Navigateur Internet
-
-
Suivez ces étapes dans l’ordre :
-
-
-
Launch System Settings on your console
-
Naviguez vers Paramètres Internet -> Paramètres de connexion
-
Cliquez sur votre emplacement de connexion réseau et allez dans Modifier -> Page suivante (flèche à droite) -> `Serveur proxy”
-
Réglez “Serveur proxy” sur “Non”
-
Cliquez sur OK, puis sur Sauvegarder
-
Lorsque vous y êtes invité, cliquez sur “Tester” pour effectuer le test de connexion
-
-
Le test devrait réussir
-
-
-
Cliquez sur “OK” pour continuer
-
Appuyez deux fois sur « Retour », puis « Fermer » pour revenir au Menu HOME
-
Ouvrez le Navigateur Internet une fois
-
Si vous êtes invité à mettre à jour votre console, appuyez sur OK
-
Il y a peut-être un problème avec votre fichier arm11code.bin. Re-téléchargez la dernière version de universal-otherapp, placez le fichier à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
-
-
-
-"PrepareArm9ForTwl returned error c8804631!"
-
-
Sauvegardez vos données et reformatez votre carte SD en FAT32 avec l’outil recommandé en fonction de votre système d’exploitation (Windows, macOS, Linux). MiniTool Partition Wizard et l’outil de formatage d’HP (HPUSBDisk) sont connus pour causer des problèmes avec les cartes SD des 3DS.
-
-
Si cela échoue, essayez d’utiliser une autre carte SD.
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-"Une erreur est survenue. Veuillez sauvegarder les données de tout logiciel en cours d'utilisation et redémarrer la console."
-
-
La date n’est pas correctement configurée. Pour la configurer correctement, suivez ces étapes :
-
-
-
Ouvrez les Paramètres de la console depuis le Menu HOME.
-
Allez dans Autres paramètres.
-
Puis Date et heure.
-
Appuyez sur Date.
-
Appuyez sur les flèches Haut/Bas pour définir le jour, le mois et l’année.
-
Appuyez sur OK pour confirmer.
-
-
-
If the problem persists:
-
-
-
Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
-
Ensure that you selected the correct payload for your region AND system version
Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
-
Retentez l’exploit
-
-
-
Try changing the system language to something other than the current language
-
-
-
-
-
-"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..." (écran noir avec texte)
-
-
Le fichier arm11code.bin est absent ou mal placé. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
-
-
-
-
-
-
-An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
-
-
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -979,6 +571,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1078,7 +679,7 @@ window.cookieconsent.initialise({
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
-
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
+
Retentez l’exploit
+
+
+
Try changing the system language to something other than the current language
+
+
+
+
+
+"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..." (écran noir avec texte)
+
+
Le fichier arm11code.bin est absent ou mal placé. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
+
+
+
+
+
+
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
+
+
+
+
+
+"Une erreur est survenue. Maintenez le bouton POWER enfoncé pour éteindre la console..." (écran noir avec texte)
+
+
Le fichier arm11code.bin est absent ou mal placé. Téléchargez la dernière version de universal-otherapp, placez otherapp.bin à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
+
+
+
+"Le logiciel a été arrêté car une erreur est survenue. La console va redémarrer." (boîte de message blanche)
+
+
Il y a peut-être un problème avec votre fichier arm11code.bin. Téléchargez la dernière version de universal-otherapp, placez otherapp.bin à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
+
+
You can also try resetting your browser save data:
+
+
+
Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
+
Retentez l’exploit
+
+
+
+
+
+L'ouverture du QR code ou de l'URL de browserhax plante
+
+
Les exploits basés sur le Navigateur Internet (comme celui-ci) sont souvent instables et plantent fréquemment, mais ils peuvent parfois être corrigés en effectuant les étapes suivantes.
+
+
+
Lancez le Navigateur Internet, puis accédez aux paramètres du navigateur
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
+
Retentez l’exploit
+
+
+
+
+Demande de mise à jour de la console lors de l'ouverture du Navigateur Internet
+
+
Le proxy SSLoth a été mal configuré. Refaites la section SSLoth de la page.
+
+
+
+Erreur 032-0420 lors de l'ouverture du Navigateur Internet
+
+
Suivez ces étapes dans l’ordre :
+
+
+
Launch System Settings on your console
+
Naviguez vers Paramètres Internet -> Paramètres de connexion
+
Cliquez sur votre emplacement de connexion réseau et allez dans Modifier -> Page suivante (flèche à droite) -> `Serveur proxy”
+
Réglez “Serveur proxy” sur “Non”
+
Cliquez sur OK, puis sur Sauvegarder
+
Lorsque vous y êtes invité, cliquez sur “Tester” pour effectuer le test de connexion
+
+
Le test devrait réussir
+
+
+
Cliquez sur “OK” pour continuer
+
Appuyez deux fois sur « Retour », puis « Fermer » pour revenir au Menu HOME
+
Ouvrez le Navigateur Internet une fois
+
Si vous êtes invité à mettre à jour votre console, appuyez sur OK
+
Il y a peut-être un problème avec votre fichier arm11code.bin. Re-téléchargez la dernière version de universal-otherapp, placez le fichier à la racine de votre carte SD et renommez-le en arm11code.bin. N’ajoutez pas l’extension .bin si vous ne la voyez pas déjà.
+
+
+
+"PrepareArm9ForTwl returned error c8804631!"
+
+
Sauvegardez vos données et reformatez votre carte SD en FAT32 avec l’outil recommandé en fonction de votre système d’exploitation (Windows, macOS, Linux). MiniTool Partition Wizard et l’outil de formatage d’HP (HPUSBDisk) sont connus pour causer des problèmes avec les cartes SD des 3DS.
+
+
Si cela échoue, essayez d’utiliser une autre carte SD.
Si vous appréciez ce guide, nous acceptons les Dons.
-
-
-
-
-
-
Lecture requise
-
-
To use the Seedminer exploit, you must update your console to the latest system version.
-
-
Ce dont vous avez besoin
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
La console peut afficher un message disant “Aucune mise à jour nécessaire” au lieu de faire une mise à jour. Ceci est normal si vous êtes déjà à jour ; passez à la section suivante.
-
Si vous obtenez une erreur, réglez vos paramètres DNS et proxy sur « Automatique »
Si vous appréciez ce guide, nous acceptons les Dons.
-
-
-
-
-
-
Lecture requise
-
-
To use the super-skaterhax exploit, you must update your console to the latest system version.
-
-
Ce dont vous avez besoin
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
La console peut afficher un message disant “Aucune mise à jour nécessaire” au lieu de faire une mise à jour. Ceci est normal si vous êtes déjà à jour ; passez à la section suivante.
-
Si vous obtenez une erreur, réglez vos paramètres DNS et proxy sur « Automatique »
Si vous appréciez ce guide, nous acceptons les Dons.
-
-
-
-
-
-
Lecture requise
-
-
To use the MSET9 exploit, you must update your console to the latest system version.
-
-
Ce dont vous avez besoin
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
La console peut afficher un message disant “Aucune mise à jour nécessaire” au lieu de faire une mise à jour. Ceci est normal si vous êtes déjà à jour ; passez à la section suivante.
-
Si vous obtenez une erreur, réglez vos paramètres DNS et proxy sur « Automatique »
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
-
-
-
-
-
-
-
-
Az MSET9 jelenleg az egyetlen exploit 3DS / 3DS XL / 2DS konzolhoz a 11.17.0 firmware-en, ami ingyenes és nem igényel semmilyen szoftvert. Ha nem tudod használni, akkor olyan metódust kell használnod, aminek van valamilyen előkövetelménye.
-
-
Telepített eShop címek
-
-
Mivel a Nintendo eShop már nem teszi lehetővé a vásárlást, nem lehetséges új címek vásárlása. Azonban újra le tölthetsz egy címet, ha megvásároltad vagy letöltötted azt, mielőtt a vásárlások leállításra kerültek.
-
-
Valamelyik az alábbi címek közül használható a Seedminer-rel együtt egyedi firmware telepítésére:
-
-
Mario Kart 7 (gyakran előre telepített cím; a fizikia cartridge is működik)
-
Pokémon Picross (ingyen játszható; csak digitális)
-
Steel Diver: Sub Wars (ingyen játszható; csak digitális)
-
-
BÁRMELYIK DSiWare cím (ingyenes vagy fizetős; csak digitális)
Ez a metódus egy kompatibilis DS flashcartot igényel, ami ntrboot-ra van flash-elve, ami működik minden 3DS-családbeli konzolon, fuggetlenül a modelltől vagy a régiótól.
-
-
Ha a fenti opciók egyike sem áll rendelkezésedre, akkor ez a legolcsóbb opció. Ha nem rendelkezel kompatibilis cartridge-gel, előre flashelt ntrboot-kompatiblis cartridge vásárolható itt körülbelül 20 USD-ért.
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
-
-
-
-
-
-
-
-
Fontos tudnivalók
-
-
Ahhoz, hogy a rendszerből kinyerjük a DSiWare adatokat, egy hibát használunk ki a DSiWare adat kezelési ablakában, a rendszer beállításokban.
-
-
Hogy ezt elérjük, szükségünk van a rendszer titkosítási kulcsára (movable.sed), hogy újra építsünk egy DSiWare mentést, aminek segítségével ki tudjuk nyerni a DSi Internet beállítások alkalmazást az SD kártyára.
-
-
Ha van egy DSiWare mentésed, egy exploitolható DSiWare cím injektálható a DS Download Play-be, amivel telepíthető az egyéni firmware.
-
-
Ezek a lépések CSAK tajvani konzolokhoz jók (amit T betű jelez a rendszer verzió mögött, mint például 11.16.0-39T)! Ha a konzolod más régióból van válaszd a másik metódust.
A b9stool legfrissebb verziója (közvetlen letöltés)
-
A [Frogminer_save] legújabb kiadása (https://github.com/zoogie/Frogminer/releases/latest) (Frogminer_save.zip)
-
-
-
I. rész - CFW ellenőrzés
-
-
További biztonsági lépésként további ellenőrzést végzünk egyedi firmware-re. Ez azért szükséges, mert ha ezt a metódust használjuk már telepített egyedi firmware esetén, meg van a kockázata, hogy brickeljük a konzolt (ami használhatatlanna teszi helyreállítási metódusok nélkül, mint az ntrboot).
-
-
-
Kapcsold ki a konzolod
-
Nyomd le és tartsd nyomva (Select) gombot
-
Kapcsold be a konzolod, miközben nyomva tartod a (Select) gombot
-
Ha az ellenőrzés sikeres volt, be fogsz bootolni a HOME Menübe és végrehajthatod ezt az útmutatót
-
Kapcsold ki a konzolod
-
-
-
Ha a konfigurációs menüt látod vagy a konzolod azonnal kikapcsol, már van CFW-d és az útmutató folyatása BRICKELHETI a konzolodat! Kövesd a CFW ellenőrzését a már meglévő CFW-d frissítéséhez.
-
-
II. rész - Előkészületek
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Másold át a boot.nds-t (B9STool) a release .zip-ből az SD kártyád gyökerébe
-
Másold át a private mappát a Frogminer_save .zip-ből az SD kártyád gyökerébe
-
Maradjon az SD kártya a számítógépedben - további teendő lesznek még vele a következő fejezetben
Jegyezd fel milyen szám találhat a DSiWare címben a második oldalon (egy 1 és 6 közötti szám kell legyen)
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappába az SD kártyán
-
Nyisd meg az output_(name) .zip fájlt és navigálj ide: China_Taiwan -> output_setup -> output_hax
-
Másold a .bin fájlt aminek a száma látható volt a második oldalán a DSiWare Management menünek a Nintendo DSiWare mappába és írd felül, hogyha kérdezi
-
Kapcsold be a konzolod
-
Lépj be a “System Settings”-be a konzolodon
-
Navigálj ide: Data Management -> DSiWare -> SD Card (kép)
-
Várj egy picit
-
-
A következőknek kell történnie ebben a sorrendben: folyamatjelző, egy rövid fagyás, az alsó képernyő lilára vált, a zene megáll, majd a konzol egy hibaüzenetet jelenít meg és újraindul
-
Ha nem látod a lila képernyőt, valami hiba történt
-
-
-
Most egy 42383821.bin fájlnak kell lennie az SD kártya gyökerében
-
Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappába az SD kártyán
-
Töröld az összes .bin fájlt a Nintendo DSiWare mappából
A “Username” mező alatt adj meg egy tetszőleges alfanumerikus nevet (nem lehet benne szóköz vagy speciális karakter)
-
-
Lehet, hogy szeretnél más nevet megadni, hogy megkülönböztesd a BannerBomb3 kimenetétől
-
-
-
A “DSiBin” mező alatt töltsd fel a 42383821.bin fájlod az első “Browse…” opció használatával
-
A “MovableSed” mező alatt töltsd fel a movable.sed fájlod a második “Browse…” opció használatával
-
Az “InjectionTarget” mező alatt válaszd ki az injection target-et DSdownloadplay-re (NEM memorypit)
-
Kattints a “Build”-re
-
-
Várj néhány másodpercet a build folyamat befejezésére
-
-
-
A Build History szekcióban a bal oldalon gépeld be a felhasználónevet (Username) a “Filter Builds” mezőbe
-
Kattints az első keresési találatra
-
-
Ennek kell a legutolsó időbélyeggel rendelkeznie
-
-
-
Kattints az “output_(name).zip” linkre
-
Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappába az SD kártyán
-
Másold a 484E4441.bin fájlt az hax mappájából a letöltött DSiWare csomagból (output_(name).zip) a Nintendo DSiWare mappába
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
Lépj be a “System Settings”-be a konzolodon
-
Navigálj ide: Data Management -> DSiWare
-
Az “SD Card” szekcióban válaszd a “Haxxxxxxxxx!” címet
-
Válaszd a “Copy”-t, majd az “OK”-t
-
-
-
V. rész - Flipnote Exploit
-
-
Ebben a fejezetben végrehajtasz egy specifikus lépés sorozatot a Flipnote Studio-val, ami ha helyesen került végrehajtásra, elindítja a boot9strap (egyedi firmware) telepítőt.
-
-
Ha inkább egy vizuális útmutatót szeretnél ehhez a fejezethez, itt elérhető egy.
-
-
-
Lépj ki a System Settings-ből
-
Idítsd el a Download Play-t a konzolodon (a narancssárga ikon egy 3DS-el)
-
Válaszd “Nintendo DS”-t
-
Ha az exploit sikeres volt, a 3DS-ednek ezt követően be kell töltenie a JPN verzióját a Flipnote Studio-nak
-
Fejezd be a kezdeti telepítését az elindított játéknak, amíg el nem éri a fő menüt
-
-
Válaszd a bal opciót, ha kérdezi a telepítési folyamat során
Az érintőképernyőt használva válaszd ki a bal nagy dobozt, majd válaszd a dobozt az SD kártya ikonnal
-
Ha a menü betöltött válaszd az arc ikont utána, pedig a jobb alsó ikont a folytatáshoz
-
Nyomj (X)-et vagy (Fel)-t a D-Pad-on, attól függően mi jelenik meg a képernyőn
-
Válaszd a második gombot a film-szalag ikonnal
-
Görgess jobbra, amíg a 3/3 filmtekercs kiválasztásra kerül
-
Nyomd meg a harmadik dobozt benne az “A” betűvel
-
Görgess balra, amíg a 1/3 filmtekercs kiválasztásra kerül
-
Nyomd meg a negyedik dobozt benne az “A” betűvel
-
Ha az exploit sikeres volt, a konzolodnak ezt követően be kell töltenie a b9sTool-t
-
-
-
VI. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
A D-Pad-dal menj az “Install boot9strap” opcióra
-
-
Ha kihagytad ezt a lépést a rendszer a HOME Menübe kerülsz a boot9strap telepítése helyett, és elölről kell kezdened az előző résztől
-
-
-
Nyomj (A)-t majd ezt követően START-ot és SELECT-et egyszerre a folyamat elkezdéséhez
-
Ha végzett és az alsó képernyő azt mondja “done.” lépj ki a b9sTool-ból, majd kapcsold ki a konzolod
-
-
Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
Ha a Luma konfigurációs képernyőjét látod, kapcsold ki a konzolod, majd folytasd a következő résszel
-
-
-
-
-
VII. rész - Luma3DS beállítás
-
-
-
Nyomd le és tartsd nyomva a (Select) gombot, és a (Select) nyomva tartása mellett kapcsold be a konzolod
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
VIII. rész - A DS Download Play visszaállítása
-
-
-
Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappába az SD kártyán
-
Másold a 484E4441.bin fájlt az clean mappájából a letöltött DSiWare csomagból (output_(name).zip) a Nintendo DSiWare mappába
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
Lépj be a “System Settings”-be a konzolodon
-
Navigálj ide: Data Management -> DSiWare
-
Az “SD Card” szekcióban válaszd a “Haxxxxxxxxx!” címet
-
Válaszd a “Copy”-t, majd az “OK”-t
-
Lépj ki a System Settings-ből
-
Kapcsold ki a konzolod
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Ahhoz, hogy saját kódot futtassunk, kihasználunk egy hibát a DSiWare Data Management ablakában, a Settings alkalmazásban.
-
-
Ahhoz, hogy ezt elérjük, szükségünk van a rendszer titkosítási kulcsára (movable.sed), hogy újra építsünk egy DSiWare mentést, amivel exploit-olni tudjuk a rendszert.
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
-
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá. A metódusok a korábbi firmware-eken könnyebbek és stabilabbak.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Mind a New3DS mind az Old3DS most már rendelkezik ingyenes szoftveres metódussal, ami (a legtöbb részére) nem igényel külső hardvert vagy szoftvert.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Igen, továbbra is tudsz telepíteni egyedi firmware-t a 3DS-edre, az eShop bezárása után is.
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
-
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá. A metódusok a korábbi firmware-eken könnyebbek és stabilabbak.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Mind a New3DS mind az Old3DS most már rendelkezik ingyenes szoftveres metódussal, ami (a legtöbb részére) nem igényel külső hardvert vagy szoftvert.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
A freakyhax egy exploit a Freakyforms Deluxe játékhoz, amit plutooo fedezett fel és készített. A 9.0.0-11.17.0 verziókon EUR, USA és JPN régiós konzolokon működik.
-
-
-
-
Ez a metódus működő 3DS kamerát igényel.
-
-
Amire szükséged lesz
-
-
-
Egy EUR/USA/JPN példánya a Freakyforms Deluxe-nak (eShop vagy cartridge)
A HBL otherappok legfrissebb verziója (közvetlen letöltés)
-
-
-
Lépések
-
-
I. rész - Előkészületek
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Másol minden fájlt és mappát a /build/<your console and region>/exploit/ mappájából a freakyhax .zip-nek az SD kártyád gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Másold a modelledhez/régiódhoz/verziódhoz tartozó otherapp payloadot az otherapps_with_CfgS_11.17.zip fájlból a az SD kártyád gyökerébe, majd nevezd át otherapp.bin névre
-
-
Ne add hozzá a .bin kiterjesztést, ha nem látod
-
-
-
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
-
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
-
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
-
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
-
-
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
-
-
-
Másold át a nimdsphax mappát a nimdsphax .zip-ből az SD kártya gyökerében található 3ds mappába
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
-
-
-
-
-
-
-
-
II. rész - freakyhax
-
-
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
Indítsd el a Freakyforms Deluxe-ot
-
A játék menüjében válaszd a Play -> Camera -> Load a QR code-t
-
Válaszd a QR kódot
-
Ekkor a konzolodnak be kell bootolnia a Homebrew Launcher-be
-
Indítsd el a nimdsphax-et a homebrew listájáról
-
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-
-
Ha a konzolod lefagy egy vörös képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
-
-
-
-
-
III. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
-
-
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
-
-
-
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Ez a metódusa a Seedminer használatának a további exploitoláshoz használja a movable.sed fájlod, hogy dekriptáljon egy DSiWare címet, azzal az céllal, hogy beinjektáljon egy exploitolható DSiWare címet a DS Download Play alkalmazásba.
-
-
Ez egy jelenleg működő megvalósítása a “FIRM partitions known-plaintext” néven ismert exploitnak, amiről részletesebben olvashatsz itt.
-
-
-
-
Csak akkor szabad erre az oldalra jutnod, ha 11.17.0 verziót futtatsz. Ha más firmware-en vagy mint 11.17.0 vagy 11.16.0, akkor ÁLLJ MEG, ez az útmutató BRICKELNI FOG más firmware-en!!
További biztonsági lépésként további ellenőrzést végzünk egyedi firmware-re. Ez azért szükséges, mert ha ezt a metódust használjuk már telepített egyedi firmware esetén, meg van a kockázata, hogy brickeljük a konzolt (ami használhatatlanna teszi helyreállítási metódusok nélkül, mint az ntrboot).
-
-
-
Kapcsold ki a konzolod
-
Nyomd le és tartsd nyomva (Select) gombot
-
Kapcsold be a konzolod, miközben nyomva tartod a (Select) gombot
-
Ha az ellenőrzés sikeres volt, be fogsz bootolni a HOME Menübe és végrehajthatod ezt az útmutatót
-
Kapcsold ki a konzolod
-
-
-
Ha a konfigurációs menüt látod vagy a konzolod azonnal kikapcsol, már van CFW-d és az útmutató folyatása BRICKELHETI a konzolodat! Kövesd a CFW ellenőrzését a már meglévő CFW-d frissítéséhez.
-
-
II. rész - Előkészületek
-
-
Ebben a fejezetben fel fogod másolni azokat a fájlokat, amik átmenetileg lecserélik a DS Connection Settings-t a Flipnote Studio-val, ami arra használt, hogy elindítsa a boot9strap (egyedi firmware) telepítőt.
Ebben a fejezetben végrehajtasz egy specifikus lépés sorozatot a Flipnote Studio-val, ami ha helyesen került végrehajtásra, elindítja a boot9strap (egyedi firmware) telepítőt.
-
-
Ha inkább egy vizuális útmutatót szeretnél ehhez a fejezethez, itt elérhető egy.
-
-
-
Térj vissza a System Settings főmenüjébe
-
Navigálj az Internet Settings -> Nintendo DS Connections opcióhoz, majd válaszd az “OK”-t (kép)
-
Ha az exploit sikeres volt, a konzolodnak ezt követően be kell töltenie a JPN verzióját a Flipnote Studio-nak
-
Az érintőképernyőt használva válaszd ki a bal nagy dobozt, majd válaszd a dobozt az SD kártya ikonnal
-
Ha a menü betöltött válaszd az arc ikont utána, pedig a jobb alsó ikont a folytatáshoz
-
Nyomj (X)-et vagy (Fel)-t a D-Pad-on, attól függően mi jelenik meg a képernyőn
-
Válaszd a második gombot a film-szalag ikonnal
-
Görgess jobbra, amíg a 3/3 filmtekercs kiválasztásra kerül
-
Nyomd meg a harmadik dobozt benne az “A” betűvel
-
Görgess balra, amíg a 1/3 filmtekercs kiválasztásra kerül
-
Nyomd meg a negyedik dobozt benne az “A” betűvel
-
Ha az exploit sikeres volt, a konzolodnak ezt követően be kell töltenie a b9sTool-t
-
-
-
V. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
A D-Pad-dal menj az “Install boot9strap” opcióra
-
-
Ha kihagytad ezt a lépést a rendszer a HOME Menübe kerülsz a boot9strap telepítése helyett, és elölről kell kezdened az előző résztől
-
-
-
Nyomj (A)-t majd ezt követően START-ot és SELECT-et egyszerre a folyamat elkezdéséhez
-
Ha végzett és az alsó képernyő azt mondja “done.” lépj ki a b9sTool-ból, majd kapcsold ki a konzolod
-
-
Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
Ha a Luma konfigurációs képernyőjét látod, kapcsold ki a konzolod, majd folytasd a következő résszel
-
-
-
-
-
VI. rész - Luma3DS beállítás
-
-
-
Nyomd le és tartsd nyomva a (Select) gombot, és a (Select) nyomva tartása mellett kapcsold be a konzolod
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
-
-
-
VII. rész - A DS Connection Settings visszaállítása
-
-
Ebben a fejezetben vissza fogod állítani a DS Connection Settings-et az az előtti állapotára, mielőtt lecserélésre került a Flipnote Studio-ra egy korábbi szakaszban.
-
-
-
Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappába az SD kártyán
-
Másold a 42383841.bin fájlt az clean mappájából a letöltött DSiWare csomagból (output_(name).zip) a Nintendo DSiWare mappába, felülírva az ott találhatót
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
Lépj be a “System Settings”-be a konzolodon
-
Navigálj ide: Data Management -> DSiWare -> SD Card (kép)
A boot9strap telepítéséhez a konzolodra, megfejtjük az eszköz egyedi titkosító kulcsát. Ennek eléréséhez egy Seedminer nevű eszközt fogunk használni, hogy kiszámítsuk a konzolod adat titkosítási kulcsát (movable.sed).
-
-
Once we have movable.sed, we can edit the SD card data of the game Mario Kart 7 to install menuhax67, which will allow us to get Homebrew Launcher access.
-
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-
See here for information about Kartminer7, here for information about menuhax67, and here for information about nimdsphax.
-
-
-
-
Amire szükséged lesz
-
-
-
Egy fizikai vagy digitális példánya a Mario Kart 7-nek, ami a legutolsó verzióra (v1.2) frissített
-
-
Frissítheted a Mario Kart 7-et az eShop-ból vagy követve a frissítési kérdést, ha elindítod a játékot
-
-
-
A computer running Windows, macOS, or Linux
-
A movable.sed fájlodra a Seedminer befejezéséből
-
The latest release of Kartminer7 (the release marked WINDOWS if you have a Windows computer, or the release marked LINUX-macOS if you have a macOS or Linux-based computer)
-
A boot9strap legfrisseb verziója (közvetlen letöltés)
In this section, you will have the 3DS generate some data in Mario Kart 7 that will be used to install the exploit in a later section.
-
-
-
Tedd vissza az SD kártyád a konzoldba
-
Indítsd el a Mario Kart 7-et
-
Érintsd meg a “Mario Kart Channel” gombot alul
-
If you are prompted to, hit “Next” and “OK” to all of the prompts that you see
-
Érintsd meg a ““StreetPass List” gombot a képernyő alján középen
-
Press the (Home) button to suspend Mario Kart 7
-
Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
-
Kapcsold ki a konzolod
-
-
-
Section II - SD Card Prep Work
-
-
-
Helyezd az SD kártyád a számítógépbe
-
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
-
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
-
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
-
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
-
-
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
-
-
-
Másold át a nimdsphax mappát a nimdsphax .zip-ből az SD kártya gyökerében található 3ds mappába
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
-
Keep your SD card inserted in your computer, as it is still required in the next section
-
-
-
-
-
-
-
Section III - Installing Kartminer7
-
-
-
Extract the Release_BETA_mk7 .zip to somewhere on your computer (i.e. your desktop)
-
Copy your movable.sed file to the resources folder of the Release_BETA_mk7 folder
-
-
Ensure that the file is named exactly movable.sed
-
-
-
Open the backup folder inside of the Release_BETA_mk7 folder
-
Double-click on the BACKUP file corresponding to your console’s region (e.g. backup_USA if you have a USA copy of Mario Kart 7)
-
-
If you are unsure of your console region, you can check System Settings. U = USA; E = EUR, J = JPN
-
If you get a message from Windows Defender, click “More info”, “Run anyway”, then press any key to continue
-
If the backup was successful, you should see a new folder appear
-
If you wish to restore this data at a later date (after finishing this guide), insert your SD card and double-click on the RESTORE file corresponding to your console’s region
-
-
-
Go back to the Release_BETA_mk7 folder, then double-click on the file corresponding to your console’s region (e.g. USA if you have a USA copy of Mario Kart 7)
-
Tedd vissza az SD kártyád a konzoldba
-
-
-
IV. rész - Kartminer7
-
-
-
Kapcsold be a konzolod
-
Indítsd el a Mario Kart 7-et
-
Érintsd meg a “Mario Kart Channel” gombot alul
-
Érintsd meg a ““StreetPass List” gombot a képernyő alján középen
-
Nyomd meg az (A) gombot újra és újra
-
-
Látnod kell a “Start Race?” kérdést, majd az alsó képernyp színeinek pirosra, kékre és feférre kell változnia
-
Ha látod a vörös/kék/fehér képernyőt, de a 3DS összeomlik, csak bootolj újra és próbáld újra
-
Ha nem látsz semmi színt, módosítsd a rendszer nyelved (ha lehetséges) aztán próbáld újra az exploit-ot
-
-
-
Ha az exploit sikeres volt, akkor a 3DS be kellett bootoljon a 3DS ROP xPloit Injector-ba
-
-
-
V. rész- A menuhax67 telepítése
-
-
-
Nyomj (Y) + (D-Pad Le) gombot a menuhax67 telepítéséhez
-
-
A konzol automatikusan ki fog kapcsolni
-
-
-
Kapcsold be a konzolod
-
Kattints a kis HOME Menu beállítások ikonra a bal alsó sarkában a képernyőnek ()
-
-
Ha a konzolod lefagy egy időre majd összeomlik, ellenőrizd, hogy a Launcher.dat megtalálható-e az SD kártya gyökerében
-
-
-
Ha az exploit sikeres volt, a konzolodnak ezt követően be kell bootolnia a Homebrew Launcherbe
-
Indítsd el a nimdsphax-et a homebrew listájáról
-
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-
-
Ha a konzolod lefagy egy piros képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, majd próbáld újra futtatni a menuhax-et, bekapcsolva a konzolod és a HOME Menü beállítások ikonjára kattintva
-
-
-
-
-
VI. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
-
-
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
-
-
-
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
VII. rész - A menuhax67 eltávolítása
-
-
Ebben a fejezetben a Homebrew Launcher-t fogod használni a menuhax67 eltávolítására, ami lehetővé teszi a HOME Menu beállítások opcióinak normális elérését.
-
-
-
Indítsd el a Download Play alkalmazást ()
-
Várj, amíg Nintendo 3DS és Nintendo DS gombokat nem látsz
-
Nyomd le az (Bal Váll) + (D-Pad le) + (Select) gombokat egyszerre a Rosalina menü megnyitásához
-
Válaszd ki a “Miscellaneous options”-t
-
Válaszd a “Switch the hb. title to the current app.” opciót
-
Nyomd meg a (B) gombot a folytatáshoz
-
Nyomd meg a (B) gombot, hogy visszakerülj a Rosalina főmenüjébe
-
Nyomd meg a (B) gombot, hogy kilépj a Rosalina menüből
-
Nyomd meg a (Home) gombot hogy felfüggeszd a Download Play-t
-
Nyomd meg a “Close” gombot az alsó képernyőn a Download Play bezárásához
-
Indítsd el újra a Download Play alkalmazást
-
Ekkor a konzolodnak be kell töltenie a Homebrew Launcher-t
-
-
Ha a konzolod a betöltő splash képernyőn ragad, akkor hiányzik az boot.3dsx az SD kártyád gyökeréből
-
-
-
Indítsd el a menuhax67_installer-t a homebrew listából
-
Válaszd a REMOVE menuhax67 opciót
-
Ha azt látod, hogy “done.”, nyomj (A) gombot, majd ismét (A)-t az “EXIT to menu” opción
-
-
-
Ezen a ponton újra engedélyezheted a vezeték nélküli kommunikációt.
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
A BannerBomb3-t használjuk a menuhax67 telepítéséhez, ami lehetővé teszi, hogy elérjük a Homebrew Launcher-t. Ott elindítjuk a nimdsphax-ot ami eldinítja a SafeB9SInstaller-t.
-
-
A nimdsphax-ról itt, a menuhax67-ről meg itt találsz további információt.
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
-
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
-
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
-
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
-
-
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
-
-
-
Másold át a nimdsphax mappát a nimdsphax .zip-ből az SD kártya gyökerében található 3ds mappába
-
Tedd vissza az SD kártyád a konzoldba
-
-
-
-
-
-
-
-
-
II. rész - menuhax67
-
-
Ebben a részben a korábban telepített menuhax67 exploit-t használjuk a nimdsphax indításához, ami betölti a SafeB9SInstaller-t.
-
-
-
Kapcsold be a konzolod
-
Kattints a kis HOME Menu beállítások ikonra a bal alsó sarkában a képernyőnek ()
-
-
Ha a konzolod lefagy egy időre majd összeomlik, ellenőrizd, hogy a Launcher.dat megtalálható-e az SD kártya gyökerében
-
-
-
Ha az exploit sikeres volt, a konzolodnak ezt követően be kell bootolnia a Homebrew Launcherbe
-
Indítsd el a nimdsphax-et a homebrew listájáról
-
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-
-
Ha a konzolod lefagy egy vörös képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
-
-
-
-
-
III. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
-
-
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
-
-
-
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
IV. rész- A menuhax67 eltávolítása
-
-
Ebben a fejezetben elő fogod idézni a BannerBomb3 exploit-ot egy második alkalommal, így el tudod távolítani a menuhax67-et, amit telepítettél a II. részben. Ez újra lehetővé teszi a HOME menü normális használatát.
-
-
-
Lépj be a “System Settings”-be a konzolodon
-
Navigálj ide: Data Management -> DSiWare -> SD Card (kép)
-
Használd a D-Pad-et a navigáláshoz, és nyomd meg az (A) gombot az “Uninstall *hax” kiválasztásához
-
-
A konzolodod automatikusan újra fog indulni
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappába az SD kártyán
-
Töröld ki a F00D43D5.bin fájlt a Nintendo DSiWare mappádból és a számítógépedről. Ez nem fog kelleni többet
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
This method requires a computer running Windows, Linux, or macOS. Phones or tablets are NOT currently supported. If you do not have access to a computer, you will need to use an alternate exploit.
+
This method requires a computer running Windows, Linux, or macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
A Ninjhax2 egy exploit a “Cubic Ninja” játékhoz, amit smealum készített. Ez az oldal egy zoogie által frissített verzióját tartalmazza a ninjhax-nak ninjhax2-dx néven, ami támogatja a 11.17.0 verziót.
-
-
-
Ez a metódus működő 3DS kamerát igényel.
-
-
Etz a folyamat felülírja a Cubic Ninja mentés fájlt, ha rendelkezel ilyennel.
Ha a játék kilép a HOME menübe, az exploit sikeresen telepítésre került
-
-
-
Indítsd el a “Cubic Ninja”-t még egyszer
-
Ekkor a konzolodnak be kell bootolnia a Homebrew Launcher-be
-
Indítsd el a nimdsphax-et a homebrew listájáról
-
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-
-
Ha a konzolod lefagy egy vörös képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
-
-
-
-
-
III. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
-
-
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
-
-
-
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
A petit-compwner-t hasznájuk a b9sTool elindításához, ami telepíti a boot9strap-et.
-
-
További információk a petit-compwner-ről itt találhatók.
-
-
-
-
Csak akkor szabad erre az oldalra jutnod, ha 11.17.0 verziót futtatsz. Ha más firmware-en vagy mint 11.17.0 vagy 11.16.0, akkor ÁLLJ MEG, ez az útmutató BRICKELNI FOG más firmware-en!!
-
-
Amire szükséged lesz
-
-
-
11.16.0 vagy 11.17.0 használók: A b9sTool v6.1.1 verziója
-
-
Legyél abszolút biztos abban, hogy ezek közül valamelyik firmware-a jó fájlt töltöd le, mert rossz fájl használata BRICKELÉSHEZ vezet
További biztonsági lépésként további ellenőrzést végzünk egyedi firmware-re. Ez azért szükséges, mert ha ezt a metódust használjuk már telepített egyedi firmware esetén, meg van a kockázata, hogy brickeljük a konzolt (ami használhatatlanna teszi helyreállítási metódusok nélkül, mint az ntrboot).
-
-
-
Kapcsold ki a konzolod
-
Nyomd le és tartsd nyomva (Select) gombot
-
Kapcsold be a konzolod, miközben nyomva tartod a (Select) gombot
-
Ha az ellenőrzés sikeres volt, be fogsz bootolni a HOME Menübe és végrehajthatod ezt az útmutatót
-
Kapcsold ki a konzolod
-
-
-
Ha a konfigurációs menüt látod vagy a konzolod azonnal kikapcsol, már van CFW-d és az útmutató folyatása BRICKELHETI a konzolodat! Kövesd a CFW ellenőrzését a már meglévő CFW-d frissítéséhez.
-
-
II. rész - Előkészületek
-
-
Ebben a fejezetben fel fogod másolni azokat a fájlokat, amik szüségesek a b9sTool indításhoz, ami ahhoz kell, hogy elindítsa a boot9strap (egyedi firmware) telepítőt.
-
-
-
Helyezd az SD kártyád a számítógépbe
-
Másold át a boot.nds-t (B9STool) a release .zip-ből az SD kártyád gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
Tedd vissza az SD kártyád a konzoldba
-
-
Kapcsold be a konzolod
-
-
-
-
-
-
III. rész - petit-compwner
-
-
Ebben a részben le fogod olvasni a QR kódokat, amik ahhoz kellenek, hogy kiváltsák a petit-compwner exploit-ot.
-
-
-
Nyisd meg a petit-compwner legutolsó verzióját a számítógépeden
-
A konzolodon indítsd el a Petit Computer-t
-
Válaszd a File Management opciót
-
Válaszd a Read QR Codes opciót
-
Olvass le minden QR kódot sorrendben, az 1/5-től az 5/5-ig
-
Ha beszkennelted a QR kódokat, lépj ki a File Management-ből
-
Válasz a View Gallery opciót
-
Indítsd el a PWN programot
-
Ha az exploit sikeres volt, a konzolodnak ezt követően be kell töltenie a b9sTool-t
-
-
-
IV. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
A D-Pad-dal menj az “Install boot9strap” opcióra
-
-
Ha kihagytad ezt a lépést a rendszer a HOME Menübe kerülsz a boot9strap telepítése helyett, és elölről kell kezdened az előző résztől
-
-
-
Nyomj (A)-t majd ezt követően START-ot és SELECT-et egyszerre a folyamat elkezdéséhez
-
Ha végzett és az alsó képernyő azt mondja “done.” lépj ki a b9sTool-ból, majd kapcsold ki a konzolod
-
-
Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
Ha a Luma konfigurációs képernyőjét látod, kapcsold ki a konzolod, majd folytasd a következő résszel
-
-
-
-
-
V. rész - Luma3DS beállítás
-
-
-
Nyomd le és tartsd nyomva a (Select) gombot, és a (Select) nyomva tartása mellett kapcsold be a konzolod
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Ez a metódusa Seedminer használatának további exploitolás céljából használja a movable.sed fájlt, hogy egy egyedi Pokémon Picross mentés fájlt írjon, ami felhasználható a Homebrew Launcher indítására.
-
-
-
Ennek a folyamatnak a során a Pokémon Picross mentése felülírásra kerül, ha rendelkezel ilyennel. Ha szeretnéd megőrizni a Pokémon Picross játék adatod, készítened kell egy mentést a 00000001.sav fájlról, mielőtt felülírnád.
-
-
Amire szükséged lesz
-
-
-
A “Pokémon Picross” játék telepítve az eszközödre
-
A HBL otherappok legfrissebb verziója (közvetlen letöltés)
-
-
-
Lépések
-
-
I. rész - Előkészületek
-
-
Ebben a fejezetben fel fogod másolni a fájlokat, amik a Homebrew Launcher indításához szükségesek.
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
-
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
-
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
-
Másold a modelledhez/régiódhoz/verziódhoz tartozó otherapp payloadot az otherapps_with_CfgS_11.17.zip fájlból a az SD kártyád gyökerébe, majd nevezd át otherapp.bin névre
-
-
Ne add hozzá a .bin kiterjesztést, ha nem látod
-
-
-
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
-
-
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
-
-
-
Másold át a nimdsphax mappát a nimdsphax .zip-ből az SD kártya gyökerében található 3ds mappába
-
-
-
-
-
-
-
-
-
II. rész - PicHaxx
-
-
Ebben a fejezetben létre fogsz hozni egy hackelt Pokémon Picross mentés fájlt, ami használatakor betölti a Homebrew Launcher-t a konzolodon.
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-
-
Ha a konzolod lefagy egy vörös képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
-
-
-
-
-
III. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
-
-
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
-
-
-
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
A HBL otherappok legfrissebb verziója (közvetlen letöltés)
-
-
-
Lépések
-
-
I. rész - Előkészületek
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
-
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
-
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
-
Másold a modelledhez/régiódhoz/verziódhoz tartozó otherapp payloadot az otherapps_with_CfgS_11.17.zip fájlból a az SD kártyád gyökerébe, majd nevezd át otherapp.bin névre
-
-
Ne add hozzá a .bin kiterjesztést, ha nem látod
-
-
-
Vidd át a régiódhoz kapcsolódó .wav fájlt a Release_sh2e .zip fájblól egy eszközre ami le tud játszani .wav fájlokat, például egy telefonra
-
Másold a régiódhoz kapcsolódó petitcom .icn-t az SD kártyád gyökerébe
-
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
-
-
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
-
-
-
Másold át a nimdsphax mappát a nimdsphax .zip-ből az SD kártya gyökerében található 3ds mappába
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
-
-
-
-
-
-
-
-
II. rész - smilehax
-
-
-
Indítsd el az SmileBASIC alkalmazást
-
-
Fogadd el a frissítést, ha felajánlja
-
-
-
Válaszd a “Publish/Download Projects” opciót
-
SVálaszd a “Download (Receive) using Public Key” opciót
-
Nyomd meg a “Yes” gombot
-
Add meg a “NJEQK3A4” publikus kulcsot a Public Key opció alatt a képernyőbillentyűzettel
-
Nyomd meg a “Yes” gombot a PMODEM141 letöltésének megerősítéséhez
-
Nyomj “OK”-t, utána “Back”-et, majd “Browse Projects”-t
-
Válaszd a PMODEM141-t, majd nyomd meg “Select File”-t
-
Válaszd a PMODEM141.PRG-t majd nyomj “OK”-t, azután “Yes”-t a végrehajtásához
-
Válaszd a RECEIVE FILE SIMPLEX-t
-
Készítsd elő az eszközt, amiről lejátszod a .wav fájlt
-
Tartsd a konzolt 30 cm távolságra a lejátszó hangszórójától és használj egy elfogadható (nem hangos) hangerőt a .wav fájl lejátszásához
-
Válaszd a 300BPS-t majd játszd le a .wav fájlt
-
Ha végzett nyomd meg a “Yes”-t majd az “OK”-t
-
Nyomd meg a START gombot
-
Válaszd a SH2E-xxx.TXT fájlt, majd nyomj “OK”-t, azután “Yes”-t a végrehajtásához
-
-
Ha vissza lettél dobva a menübe, akkor ellenőrizd, hogy a SmileBASIC lefrisebb verzióját használod-e
-
-
-
Ekkor a konzolodnak be kell bootolnia a Homebrew Launcher-be
-
Indítsd el a nimdsphax-et a homebrew listájáról
-
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-
-
Ha a konzolod lefagy egy vörös képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
-
-
-
-
-
III. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
-
-
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
-
-
-
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
A HBL otherappok legfrissebb verziója (közvetlen letöltés)
-
-
-
Lépések
-
-
I. rész - Előkészületek
-
-
Ellenőrizd, hogy a SmileBASIC a legutolsó verzióra frissített
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
-
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
-
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
-
Másold a new3ds_JPN.bin vagy az old3ds_JPN.bin fájlt (függően a modelledtől) az otherapps_with_CfgS_11.17.zip fájlból a az SD kártyád gyökerébe, majd nevezd át otherapp.bin névre
-
-
Ne add hozzá a .bin kiterjesztést, ha nem látod
-
-
-
Vidd át a SH2E-JPN.300.wav fajlt a Release_sh2e .zip-ből egy eszközre, ami le tud játszani
- .wav fájlokat, például egy telefonra
-
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
-
-
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
-
-
-
Másold át a nimdsphax mappát a nimdsphax .zip-ből az SD kártya gyökerében található 3ds mappába
-
Navigálj a Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e mappába az SD kártyádon`
-
Nevezd át a 00117200 mappát _00117200-ra
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
-
-
-
-
-
-
-
-
II. rész - smilehax
-
-
-
Indítsd el az SmileBASIC alkalmazást
-
-
NE FRISSÍTSD a játékot, ha felajánlja
-
-
-
Válaszd a “Publish/Download Projects” opciót
-
SVálaszd a “Download (Receive) using Public Key” opciót
-
Nyomd meg a “Yes” gombot
-
Add meg a “NJEQK3A4” publikus kulcsot a Public Key opció alatt a képernyőbillentyűzettel
-
Nyomd meg a “Yes” gombot a PMODEM141 letöltésének megerősítéséhez
-
Nyomj “OK”-t, utána “Back”-et, majd “Browse Projects”-t
-
Válaszd a PMODEM141-t, majd nyomd meg “Select File”-t
-
Válaszd a PMODEM141.PRG-t majd nyomj “OK”-t, azután “Yes”-t a végrehajtásához
-
Válaszd a RECEIVE FILE SIMPLEX-t
-
Készítsd elő az eszközt, amiről lejátszod a .wav fájlt
-
Tartsd a konzolt 30 cm távolságra a lejátszó hangszórójától és használj egy elfogadható (nem hangos) hangerőt a .wav fájl lejátszásához
-
Válaszd a 300BPS-t majd játszd le a .wav fájlt
-
Ha végzett nyomd meg a “Yes”-t majd az “OK”-t
-
Nyomd meg a START gombot
-
Válaszd a SH2E-JPN.TXT fájlt, majd nyomj “OK”-t, azután “Yes”-t a végrehajtásához
-
Ekkor a konzolodnak be kell bootolnia a Homebrew Launcher-be
-
Indítsd el a nimdsphax-et a homebrew listájáról
-
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-
-
Ha a konzolod lefagy egy vörös képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
-
-
-
-
-
III. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
-
-
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
-
-
-
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Ez a metódusa Seedminer használatának további exploitolás céljából használja a movable.sed fájlt, hogy egy egyedi Steel Diver: Sub Wars mentés fájlt írjon, ami felhasználható a Homebrew Launcher indítására.
-
-
-
Ez a folyamat felülírja a Steel Diver: Sub Wars mentés fájlt, ha rendelkezel ilyennel. Ha szeretnéd megőrizni a Steel Diver: Sub Wars játék adatod, készítened kell egy mentést a 00000001.sav fájlról, mielőtt felülírnád.
-
-
Amire szükséged lesz
-
-
-
A “Steel Diver: Sub Wars” játék telepítve az eszközödre
-
A HBL otherappok legfrissebb verziója (közvetlen letöltés)
-
-
-
Lépések
-
-
I. rész - Előkészületek
-
-
Ebben a fejezetben fel fogod másolni a fájlokat, amik a Homebrew Launcher indításához szükségesek.
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Másold át a boot.firm és boot.3dsx fájlt a Luma3DS .zip-ből az SD kártya gyökerébe
-
-
Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
-
-
-
Hozz létre egy mappát boot9strap néven az SD kártya gyökerében
-
Másold át a boot9strap.firm fájlt és a boot9strap.firm.sha fájlt a boot9strap .zip fájlból az SD kártyád /boot9strap/ mappájába
-
Másold át a SafeB9SInstaller.bin fájlt a SafeB9SInstaller .zip-ből az SD kártyád gyökerébe
-
Másold át a steelhax mappát a Steelhax-release.zip`-ből az SD kártya gyökerébe
-
Másold a modelledhez/régiódhoz/verziódhoz tartozó otherapp payloadot az otherapps_with_CfgS_11.17.zip fájlból a az SD kártyád gyökerébe, majd nevezd át otherapp.bin névre
-
-
Ne add hozzá a .bin kiterjesztést, ha nem látod
-
-
-
Hozz létre egy mappát 3ds néven az SD kártyád gyökerében, ha még nem létezik ilyen
-
-
Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a Nintendo 3DS mappa, amit a konzol automatikusan generál
-
-
-
Másold át a nimdsphax mappát a nimdsphax .zip-ből az SD kártya gyökerében található 3ds mappába
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
-
-
-
-
-
-
-
-
II. rész - Steelminer
-
-
Ebben a fejezetben létre fogsz hozni egy hackelt Steel Diver: Sub Wars mentés fájlt, ami használatakor betölti a Homebrew Launcher-t a konzolodon.
-
-
-
Indítsd el a “Steel Diver: Sub Wars”-t egyszer és válaszd a Mii-t a mentés fájl inicializálásához
-
-
Utasítsd el a játék frissítést, ha kérdezi
-
Ha már frissítetted a játékot, akkor a System Settings Data management menüjében töröld a frissítést
Navigálj a Nintendo 3DS -> <ID0> -> ` -> `title` -> `00040000` -> `<8-character-region>` -> `data` útvonalra az SD kártyán
-
-
EUR régió: 000d7e00
-
JPN régió: 000d7c00
-
USA régió: 000d7d00
-
-
-
Másold az épp letöltött 00000001.sav fájlt a data könyvtárba az SD kártyán
-
-
Írd felül a régi mentés fájlt, ha kérdezi
-
-
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
Indítsd el “Steel Diver: Sub Wars”-t
-
Ekkor a konzolodnak be kell bootolnia a Homebrew Launcher-be
-
Indítsd el a nimdsphax-et a homebrew listájáról
-
Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-
-
Ha a konzolod lefagy egy vörös képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
-
-
-
-
-
III. rész - boot9strap telepítése
-
-
Ebben a fejezetben egyedi firmware-t fogsz telepíteni a konzolodra.
-
-
-
Ha kéri, akkor nyomd meg a gombokat egyszerre, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
-
-
Ha egy lépés az alsó képernyőn piros színű szöveget eredményez, és nem kér a rendszer tőled egy gomb-kombinációt, akkor kövesd ezt a hibaelhárítási útmutatót
-
-
-
Ha ez elkészült, nyomd meg az (A) gombot a konzolod újraindításához
-
A konzolodnak a Luma3DS konfigurációs menübe kellett bootolnia
-
-
A Luma3DS konfigurációs menü a beállítások a Luma3DS egyedi firmverhez. Sok ezek közül a beállítások közül hasznos az egyedivé tételhez vagy a debuggoláshoz
-
Az útmutató céljainak megfelelően hagyd ezeket a beállításokat alapértelmezetten (ne vegyél ki vagy rakj be pipát)
-
Ha a knzolod kikapcsol amikor bekapcsolod, bizonyosodj meg róla, hogy átmásoltad-e a boot.firm fájlt a Luma3DS .zip fájlból az SD kártya gyökerébe
-
-
-
Mentéshez és újraindításhoz nyomd meg a (Start) gombot
-
-
-
Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be.
-
-
A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
-
A következő oldalon hasznos homebrew alkalmazásokat telepítünk, hogy teljessé tegyük a telepítésedet.
Ha a konzolod lefagy egy sárga képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, és próbáld újra ezt a részt
Ha a konzolod lefagy egy piros képernyőn, tartsd nyomva a POWER gombot, amíg ki nem kapcsol, csináld újra a 3. lépést a II. részben, majd próbáld újra ezt a részt
+
If your console shows “Text” on the bottom screen, you have an Old 3DS and this exploit will not work on your device
+
+
Return to Get Started and select Old 3DS/2DS as your model and reinput your system version
Ha a konzolod Luma 10.2.1 -et vagy újabbat futtat, 100% biztonságos a frissítés. Ellenőrizheted a Luma verziódat a (Select) lenyomva tartásával a konzolod elindítása közben.
Ha a konzolod régebbi Luma verziót futtat, frissítened kell a Luma-t mielőtt az eszközöd 11.17.0 verzióra frissíted.
-
Ha a konzolod nem rendelkezik még egyedi firmware-rel, NE frissítsd a legutolsó verzióra, kivéve ha ez az útmutató utasít rá. A metódusok a korábbi firmware-eken könnyebbek és stabilabbak.
-
Ha a módosítatlan konzolod MÁR 11.17.0 verzióval fut, ez az oldal annak megfelelően frissül. Mind a New3DS mind az Old3DS most már rendelkezik ingyenes szoftveres metódussal, ami (a legtöbb részére) nem igényel külső hardvert vagy szoftvert.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Ha ez az első alkalom, hogy moddolsz egy 3DS-t (vagy nem vagy ismerős a technológiával) akkor folytasd az olvasást! Egyébként, ha rendelkezel tapasztalattal és tudod, hogy mit csinálsz, folytasd a Kezdeti lépésekkel.
A boot9strap telepítéséhez a konzolodra, megfejtjük az eszköz egyedi titkosító kulcsát. Ennek eléréséhez egy Seedminer nevű eszközt fogunk használni, hogy kiszámítsuk a konzolod adat titkosítási kulcsát (movable.sed).
-
-
További információért arról, hogyan működik a Seedminer, nézd meg ezt a prezentációt.
-
-
Ez a módszer egy erős grafikus kártyát használ a szükséges számítások elvégzéséhez. Egy önkéntes által üzemeltetett webhely segít neked ebben a módszerben.
-
-
-
-
I. rész - Előkészületek
-
-
Ebben a fejezetben összeszedjük a szükséges információkat a 3DS-edről, ami ahhoz kell, hogy kitaláljuk a a konzolod titkosító kulcsát.
-
-
-
Mielőtt követnéd ezt a fejezetet:
-
-
Biztosítsd, hogy a konzolod bekapcsolásra kerüljön a behelyezett SD kártyával legalább egyszer, hogy létre jöjjön rajta a szükséges adat
-
Biztosítsd, hogy a konzolod csatlakoztatva legyen az Internethez (látnod kell egy kék “Internet” jelzőt, a bal felső sarkában a HOME képernyőnek)
-
-
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Lépj be az SD kártyád Nintendo 3DS könyvtárába
-
Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz a Nintendo 3DS mappán belül
-
-
Ez a 32 karakter hosszú név rendszer specifikus és eltérő minden konzolnál
Ha hibaüzenetet kapsz, és visszadob a menübe, vagy új Mii-t kell csinálnod, vagy a konzolod nem tud csatlakozni a Nintendo szervereihez (kitiltás vagy kapcsolódási hiba miatt)
-
-
-
Keresd meg a Mii profilodat, ott találod a “Friend Code” mezőt a felső képernyőn
-
-
-
II. rész - Seedminer
-
-
Ebben a fejezetben a Bruteforce Movable weboldalt fogod használni, hogy megszerezd a a konzolod titkosító kulcsát movable.sed formában.
Ha az oldal nem működik, csatlakozz a Nintendo Homebrew Discord-on csatornához, és kérj segítséget (angol nyelven) valakitől
-
-
-
Írd be a konzolod Friend Code-ját (szóközök és kötőjelek nélkül) a “Your friend code” mezőbe
-
Illeszd be a a konzolod 32 karakter hosszú mappanevét a “Your ID0” mezőbe
-
-
Ne próbáld meg kézzel beadni az ID0 kódot, mert könnyű hibázni. Legyél biztos abban, hogy az ID0 helyes, azzal, hogy másolod és beilleszted onnan, ahova az előző részben elmentetted
-
-
-
Nyomd meg a “Go”-t
-
-
Ha az oldal azonnal a 4. lépésre ugrik, a weboldal már feldolgozta helyesen a bruteforce kérésedet. Letöltheted a movable.sed fájlod és folytathatod a következő fejezettel. Nem szükséges (újra) hozzáadnod a bot-ot
-
-
-
Használd a “Register Friend” button gombot a konzolodon és add hozzá a bot weboldalon megadott Friend Code-ját
-
-
Ha kérdezi a rendszer, a név amit megadsz a barátnak, az nem számít
-
-
-
Várj, amíg az oldal frissül
-
-
Ha nem így történik, várj néhány percet, mielőtt frissíted az oldalt még egyszer
-
-
-
Ha az oldal feldolgozta az információd, az oldal folytatni fogja a Step 2: Bruteforce lépéssel automatikusan
-
Várj a maradék folyamat befejezésére
-
-
Ez általában gyors (1-5 perc)
-
Ez alatt a folyamat alatt, a bot, amit hozzáadtál nem biztos, hogy feltűnik a 3DS-eden. Egészen addig, amíg a weboldal frissül, ez nem probléma
-
Ha egy fél óra után is még mindig várakozol, csatlakozz a Nintendo Homebrew Discord-on csatornához, és kérj segítséget (angol nyelven) valakitől
Amikor a folyamat befejeződött, töltsd le a movable.sed fájlodat az oldalról
-
-
Őrizd meg ezt fájlt, mert szükséged lesz rá a következő oldalon
-
-
-
Kapcsold ki a konzolod
-
-
-
-
-
Következő lépések
-
-
Válaszd ki a metódust az applikciótól függően ami teleptve van a 3DS-edre. Nem számít melyik metódust választod, a végeredmény ugyanaz lesz.
-
-
Mario Kart 7
-
-
Ez a módszer a Mario Kart 7 egy cartridge vagy egy digitális másolatát használja. A movable.sed használatával módosítani tudod a Mario Kart 7 SD kárty adatát, ami hozzáférést enged Homebrew Launcher-hez, amit további exploitoláshoz használunk.
Ha rendelkezel bármilyen DSiWare címmel a 3DS-edem, akkor dumpolhatod az SD kártyára, így használható arra, hogy átmenetileg injektálja a Flipnote-oz a DS Connection Settings-be.
Ez a metódus a Pokémon Picross játékot használja, am egy free-to-play játék. A movable.sed használatával létrehozhatsz egy olyan mentést fájlt, ami hozzáférést ad a Homebrew Launcher-hez, am további exploitolásra kerül felhasználásra.
Ez a metódus a Steel Diver: Sub Wars játékot használja, am egy free-to-play játék. A movable.sed használatával létrehozhatsz egy olyan mentést fájlt, ami hozzáférést ad a Homebrew Launcher-hez, am további exploitolásra kerül felhasználásra.
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
-
-
-
-
-
-
-
-
-
Ez a metódus egy ésszerűen erős GPU-t igényel (bármilyen dedikált grafikus kártya, amit az elmúlt években készítettek) és a parancssor használatának képességét. Ha nem tudod mik ezek vagy nem rendelkezel a szükséges hardverrel, csatlakozz a Nintendo Homebrew-ra Discord-on, és nyisd meg a “#mii-mining-assistance” csatornát, majd add meg a következőket:
-
-
A Mii QR kódod, közvetlenül feltöltve a Discord-ra (ne készíts képernyő képet vagy fotót a képről, csak küld el a HNI_XXXX.JPG képet magát)
-
A konzolod ID0 azonosítója (a 32 karakter hosszú nevű mappa közvetlenül a Nintendo 3DS mappában - tekintsd meg ezt a hibaelhárítási útmutatót ha több is van)
-
A konzolod modellje (pl. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
A konzolod becsült gyártási éve; ha nem tudod, ne add meg - nem szuper fontos
-
-
-
-
-Technikai részletek (opcionális)
-
-
A boot9strap telepítéséhez a konzolodra, megfejtjük az eszköz egyedi titkosító kulcsát. Ennek eléréséhez egy Seedminer nevű eszközt fogunk használni, hogy kiszámítsuk a konzolod adat titkosítási kulcsát (movable.sed).
-
-
Mivel nincs hzzáférésünk a Friends List-hez, ezért a movable.sed első felét a egy Mii QR code használatával határozzuk meg a kétirányű barát adatcsere helyett.
-
-
További információért arról, hogyan működik a Seedminer, nézd meg ezt a prezentációt.
-
-
-
-
Lépések
-
-
Ha Linux-ot vagy macOS-t használsz, cseréld ki a py -3-at python3-mal az összes parancsban.
Ha Linux-ot használsz valószínűleg már van Python 3-ad. Ellenőrizd egy terminál megnyitásával, majd a python3 -V parancs megadásával. Ha ez egy verziószámot ad vissza, működni fog ezzel az útmutatóval.
-
-
-
-
-
I. rész - Előkészületek
-
-
Ebben a fejezetben a telepíteni fogjuk a Seedminer-t és beszerezzük a konzolod azon fájljait, amik a bányászáshoz szükségesek.
-
-
-
Csomagold ki a Seedminer .zip tartalmát és mozgasd ebből az operációs rendszereddel egyező nevű mappát bárhova a számítógépedre
-
-
Legyen ez a hely kéznél, mert ebbe a Seedminer mappába további fájlok kerülnek
-
-
-
A Seedminer mappában tartsd lenyomva a SHIFT gombot, majd jobb gombbal kattints bárhova a mappában, ahol üres hely van, és válaszd azt az opciót, ami megnyitja a Terminal-t, PowerShell-t vagy a parancssort (Command Prompt-ot)
-
A parancssori ablakba írd be a py -3 -m pip install pycryptodomex parancsot, majd nyomj ENTER-t és engedélyezd (allow) a telepítését
-
-
Ha ez a parancs hibára fut a No module named pip hibaüzenettel, akkor kézzel kell telepítened a pip-et. Ennek a módja megtalálható ezen az oldalon.
-
-
-
-
-
Kapcsold be a konzolod, miközben az SD kártya be van helyezve
-
-
-
Nyisd meg a Mii készítő (Mii Maker) alkalmazást
-
Érintsd meg a “QR Code/Image Options” gombot
-
Érintsd meg a “Save Mii as QR Code” opciót
-
Válassz egy Mii Character-t ** ami ezen a konzolon készült NEM pedig importált egy másik konzolról** (készíts egy újat, ha még nem lenne egy sem) és nyomj “OK”-ét
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Lépj be az SD kártyád Nintendo 3DS könyvtárába
-
Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz a Nintendo 3DS mappán belül
-
-
Ez a 32 karakter hosszú név rendszer specifikus és eltérő minden konzolnál
Kattints az “Import from…“-ra, majd válaszd a “QR Code” opciót és töltsd fel Mii QR kódot korábbról
-
Kattints az “Export to…“-ra, majd válaszd az “encrypted (.bin)”-t
-
-
Ez le fog tölteni egy input.bin nevü fájlt
-
-
-
Másold ezt az input.bin-t a Seedminer mappájába
-
Nyisd meg a terminál/PowerShell/Command Prompt ablakot korábbról
-
Ebbe az ablakba írd be a py -3 seedminer_launcher3.py id0 <id0> parancsot
-
-
Helyettesítsd az <id0>-t az ID0+val amit a dokumentumba másoltál
-
Ne legyenek benne a kacsacsőrök
-
Ne próbáld meg kézzel beadni az ID0 kódot, mert könnyű hibázni. Legyél biztos abban, hogy az ID0 helyes, azzal, hogy másolod és beilleszted onnan, ahova az előző részben elmentetted
-
-
-
Ha végzett írd be a py -3 seedminer_launcher3.py mii <model> <year> parancsot
-
-
Helyettesítsd a <model>-t a konzol modeljével (new vagy old) - ha nem vagy biztos benne, azok a modellek amik rendselkeznek ZL/ZR gombokkal és C-Stick-kel azok újak (new)
-
Helyettesítsd a <year>-t az évvel, amikor a 3DS készült (Old 3DS konzolon gyakran megtalálható a hátlapon, az (M)2010/(C)2011 az mindig ugyanaz, NEM indikátor - hagyd ezt üresen, ha nem vagy biztos benne
-
A becsült gyártási évek: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
Üresen hagyhatod az évet, ami azt jelenti, hogy középen kezdjük
-
A bányászási folyamat általában 90 percet igényel, függően a szerencétől és a GPU erősségétől
-
Az első szakasz a konzolmodelltől függően valószínűleg nagyjából 1500 offset-nél maximális
-
Ha a második fázis (miután látható volt a movable_part2.sed generation success üzenet) túljutott a 100-as offset-en, ellenőrizd, hogy helyes ID0-t adtál-e meg. Ha az ID0 értéked korrekt, nem tudod használni ezt a metódust és frissítened kell a legutols verzióra és meg kell nézned, hogy egy nem-Seedminer metódus elérhető-e számodra itt
-
Ha az input.bin is invalid size üzenetet látod, csinád újra az input.bin fájlt a QR kódodat használva. Ha még mindig hibára fut, nyiss meg egy másik böngészőt és készítsd újra az input.bin fájlt ott
-
Ha a LFCS has been left blank üzenetet látod, használd az ellentétes konzol modelt (pl. mii old helyett mii new)
-
-
-
Ha végzett, egy fájl movable.sed névvel megjelenik a Seedminer mappában
A boot9strap telepítéséhez a konzolodra, megfejtjük az eszköz egyedi titkosító kulcsát. Ennek eléréséhez egy Seedminer nevű eszközt fogunk használni, hogy kiszámítsuk a konzolod adat titkosítási kulcsát (movable.sed).
-
-
További információért arról, hogyan működik a Seedminer, nézd meg ezt a prezentációt.
-
-
Ez a módszer egy erős grafikus kártyát használ a szükséges számítások elvégzéséhez. Egy önkéntes által üzemeltetett webhely segít neked ebben a módszerben.
-
-
-
-
I. rész - Előkészületek
-
-
Ebben a fejezetben összeszedjük a szükséges információkat a 3DS-edről, ami ahhoz kell, hogy kitaláljuk a a konzolod titkosító kulcsát.
-
-
-
Mielőtt követnéd ezt a fejezetet:
-
-
Biztosítsd, hogy a konzolod bekapcsolásra kerüljön a behelyezett SD kártyával legalább egyszer, hogy létre jöjjön rajta a szükséges adat
-
Biztosítsd, hogy a konzolod csatlakoztatva legyen az Internethez (látnod kell egy kék “Internet” jelzőt, a bal felső sarkában a HOME képernyőnek)
-
-
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Lépj be az SD kártyád Nintendo 3DS könyvtárába
-
Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz a Nintendo 3DS mappán belül
-
-
Ez a 32 karakter hosszú név rendszer specifikus és eltérő minden konzolnál
Ha hibaüzenetet kapsz, és visszadob a menübe, vagy új Mii-t kell csinálnod, vagy a konzolod nem tud csatlakozni a Nintendo szervereihez (kitiltás vagy kapcsolódási hiba miatt)
-
-
-
Keresd meg a Mii profilodat, ott találod a “Friend Code” mezőt a felső képernyőn
-
-
-
II. rész - Seedminer
-
-
Ebben a fejezetben a Bruteforce Movable weboldalt fogod használni, hogy megszerezd a a konzolod titkosító kulcsát movable.sed formában.
Ha az oldal nem működik, csatlakozz a Nintendo Homebrew Discord-on csatornához, és kérj segítséget (angol nyelven) valakitől
-
-
-
Írd be a konzolod Friend Code-ját (szóközök és kötőjelek nélkül) a “Your friend code” mezőbe
-
Illeszd be a a konzolod 32 karakter hosszú mappanevét a “Your ID0” mezőbe
-
-
Ne próbáld meg kézzel beadni az ID0 kódot, mert könnyű hibázni. Legyél biztos abban, hogy az ID0 helyes, azzal, hogy másolod és beilleszted onnan, ahova az előző részben elmentetted
-
-
-
Nyomd meg a “Go”-t
-
-
Ha az oldal azonnal a 4. lépésre ugrik, a weboldal már feldolgozta helyesen a bruteforce kérésedet. Letöltheted a movable.sed fájlod és folytathatod a következő fejezettel. Nem szükséges (újra) hozzáadnod a bot-ot
-
-
-
Használd a “Register Friend” button gombot a konzolodon és add hozzá a bot weboldalon megadott Friend Code-ját
-
-
Ha kérdezi a rendszer, a név amit megadsz a barátnak, az nem számít
-
-
-
Várj, amíg az oldal frissül
-
-
Ha nem így történik, várj néhány percet, mielőtt frissíted az oldalt még egyszer
-
-
-
Ha az oldal feldolgozta az információd, az oldal folytatni fogja a Step 2: Bruteforce lépéssel automatikusan
-
Várj a maradék folyamat befejezésére
-
-
Ez általában gyors (1-5 perc)
-
Ez alatt a folyamat alatt, a bot, amit hozzáadtál nem biztos, hogy feltűnik a 3DS-eden. Egészen addig, amíg a weboldal frissül, ez nem probléma
-
Ha egy fél óra után is még mindig várakozol, csatlakozz a Nintendo Homebrew Discord-on csatornához, és kérj segítséget (angol nyelven) valakitől
Amikor a folyamat befejeződött, töltsd le a movable.sed fájlodat az oldalról
-
-
Őrizd meg ezt fájlt, mert szükséged lesz rá a következő oldalon
-
-
-
Kapcsold ki a konzolod
-
-
-
-
-
Következő lépés: BannerBomb3
-
-
Ha meg van a konzolod titkosítási kulcsa (movable.sed) a Bannerbomb3-mal együtt használhatod, ami a movable.sed fájlodat használja, hogy a System Settings-ben megtalálható exploitokat kihasználja.
A boot9strap telepítéséhez a konzolodra, megfejtjük az eszköz egyedi titkosító kulcsát. Ennek eléréséhez egy Seedminer nevű eszközt fogunk használni, hogy kiszámítsuk a konzolod adat titkosítási kulcsát (movable.sed).
-
-
További információért arról, hogyan működik a Seedminer, nézd meg ezt a prezentációt.
-
-
Ez a módszer egy erős grafikus kártyát használ a szükséges számítások elvégzéséhez. Egy önkéntes által üzemeltetett webhely segít neked ebben a módszerben.
-
-
-
-
I. rész - Előkészületek
-
-
Ebben a fejezetben összeszedjük a szükséges információkat a 3DS-edről, ami ahhoz kell, hogy kitaláljuk a a konzolod titkosító kulcsát.
-
-
-
Mielőtt követnéd ezt a fejezetet:
-
-
Biztosítsd, hogy a konzolod bekapcsolásra kerüljön a behelyezett SD kártyával legalább egyszer, hogy létre jöjjön rajta a szükséges adat
-
Biztosítsd, hogy a konzolod csatlakoztatva legyen az Internethez (látnod kell egy kék “Internet” jelzőt, a bal felső sarkában a HOME képernyőnek)
-
-
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Lépj be az SD kártyád Nintendo 3DS könyvtárába
-
Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz a Nintendo 3DS mappán belül
-
-
Ez a 32 karakter hosszú név rendszer specifikus és eltérő minden konzolnál
Ha hibaüzenetet kapsz, és visszadob a menübe, vagy új Mii-t kell csinálnod, vagy a konzolod nem tud csatlakozni a Nintendo szervereihez (kitiltás vagy kapcsolódási hiba miatt)
-
-
-
Keresd meg a Mii profilodat, ott találod a “Friend Code” mezőt a felső képernyőn
-
-
-
II. rész - Seedminer
-
-
Ebben a fejezetben a Bruteforce Movable weboldalt fogod használni, hogy megszerezd a a konzolod titkosító kulcsát movable.sed formában.
Ha az oldal nem működik, csatlakozz a Nintendo Homebrew Discord-on csatornához, és kérj segítséget (angol nyelven) valakitől
-
-
-
Írd be a konzolod Friend Code-ját (szóközök és kötőjelek nélkül) a “Your friend code” mezőbe
-
Illeszd be a a konzolod 32 karakter hosszú mappanevét a “Your ID0” mezőbe
-
-
Ne próbáld meg kézzel beadni az ID0 kódot, mert könnyű hibázni. Legyél biztos abban, hogy az ID0 helyes, azzal, hogy másolod és beilleszted onnan, ahova az előző részben elmentetted
-
-
-
Nyomd meg a “Go”-t
-
-
Ha az oldal azonnal a 4. lépésre ugrik, a weboldal már feldolgozta helyesen a bruteforce kérésedet. Letöltheted a movable.sed fájlod és folytathatod a következő fejezettel. Nem szükséges (újra) hozzáadnod a bot-ot
-
-
-
Használd a “Register Friend” button gombot a konzolodon és add hozzá a bot weboldalon megadott Friend Code-ját
-
-
Ha kérdezi a rendszer, a név amit megadsz a barátnak, az nem számít
-
-
-
Várj, amíg az oldal frissül
-
-
Ha nem így történik, várj néhány percet, mielőtt frissíted az oldalt még egyszer
-
-
-
Ha az oldal feldolgozta az információd, az oldal folytatni fogja a Step 2: Bruteforce lépéssel automatikusan
-
Várj a maradék folyamat befejezésére
-
-
Ez általában gyors (1-5 perc)
-
Ez alatt a folyamat alatt, a bot, amit hozzáadtál nem biztos, hogy feltűnik a 3DS-eden. Egészen addig, amíg a weboldal frissül, ez nem probléma
-
Ha egy fél óra után is még mindig várakozol, csatlakozz a Nintendo Homebrew Discord-on csatornához, és kérj segítséget (angol nyelven) valakitől
Amikor a folyamat befejeződött, töltsd le a movable.sed fájlodat az oldalról
-
-
Őrizd meg ezt fájlt, mert szükséged lesz rá a következő oldalon
-
-
-
Kapcsold ki a konzolod
-
-
-
-
-
Következő lépés: BannerBomb3
-
-
Ha meg van a konzolod titkosítási kulcsa (movable.sed) a Bannerbomb3-mal együtt használhatod, ami a movable.sed fájlodat használja, hogy a System Settings-ben megtalálható exploitokat kihasználja.
-
-
-Több hosszú mappanév a Nintendo 3DS mappában
-
-
-
-
Ez akkor fordul elő, ha az SD kártyádat több 3DS konzolban használod, és a célja, hogy megakadályozza a nem szándékos adat egyesítést olyan adattal, ami nem lenne érvényes másik konzolon. Ahhoz, hogy megtaláld melyik hosszú mappa név a helyes a 3DS-edhez, kövesd a következő lépéseket:
-
-
-
Nevezd át a Nintendo 3DS mappát BACKUP_Nintendo 3DS névre
-
Tedd vissza az SD kártyád a konzoldba
-
Kapcsold be a konzolod
-
Várd meg, amíg a konzolod legenerálja az SD kártyára az adatokat
-
-
Az alkalmazásaidnak el kell tűnniük. Ez normális, hamarosan megoldjuk
-
-
-
Kapcsold ki a konzolod
-
Helyezd az SD kártyád a számítógépbe
-
Lépj be az SD kártyád Nintendo 3DS könyvtárába
-
Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz
-
A weboldal már kibányászta a movable.sed fájlod friend code-od és az ID0 kombinációjának használatával. Használhatod a movable.sed-et amit biztosított számodra.
-
-
-
-Important! You have been locked out of the automated part1 dumper system...
-
-
A friend code-od blokkolt friend code bot általi használattól, mert a 3DS-ed nem fogadta el sikeresen a bot friend (barát) kérését. Ellenőrizd, hogy a 3DS-ed megfelelően csatlakozik az internethez, majd csatlakozz a Nintendo Homebrew-hoz Discord-on és kérdezd meg, és kérdezz rá az unlockolásra.
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
A weboldal úgy találta, hogy a movable.sed-ed nem brute-force-olható. Ellenőrizd, hogy helyes ID0-t adtál-e meg a weboldalon. Ha az ID0-d helyes, akkor nem tudod használni a Seedminer-t és egy alternatív metódust kell használnod.
-
-
A New 3DS felhasználók követhetik a Boot9strap telepítése (super-skaterhax), míg az Old 3DS felhasználók a Boot9strap telepítése (MSET9) útmutatókat. Ha nem tudsz MSET9 metódust használni valamiért, akkor olyan metódusra van szükséged, ami tovább játékot vagy hardvert igényel.
-
-
-
-
BannerBomb3
-
-
-Több ID1 mappa az ID0 mappában
-
-
-
-
This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
-
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
-
-
-
-
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
-
-
-
-
-
-
Your SD card should now look something like this:
-
-
-
-
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
-
-
-
-
-A DSiWare Management menü összeomlik a BB3 multihax menü megjelenése nélkül
-
Biztosítsd, hogy az F00D43D5.bin az egyetlen fájl a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare mappában. Ha így van, hozd létre újra a BannerBomb3 Injector segítségével.
-
-
Továbbá légy biztos abban, hogy a bb3.bin fájl megtalálható az SD kártyád gyökerében. Ha hiányzik, töltsd le a legutolsó kiadását az Bannerbomb3-nak (közvetlen letöltés), és másold a bb3.bin fájlt a Release .zip-ből az SD kártyád gyökerébe.
-
-
Ha ezen megoldások egyike sem javítja ezt a problémát, akkor az egyedi firmware eltávolításra kerülhetett erről a konzolról, úgy, hogy az lehetetlenné teszi ennek a metódusnak a végrehajtását. Ebben az esetben csatlakozz a Nintendo Homebrew-hoz Discord-on és kérj, támogatást angolul.
-
-
-
-DSiWare Management menü a "No accessible software data." üzenetet jeleníti meg
-
-
Az F00D43D5.bin hiányzik a Nintendo 3DS -> <ID0> - > <ID1> -> Nintendo DSiWare mappából. Ellenőrizd, hogy a Nintendo DSiWare helyesen írt és szóközölt. Nagybetű/kisbetű nem számít.
-
-
-
-A DSiWare Management egy kérdőjelet mutat
-
-
Probléma van az F00D43D5.bin fájloddal (hibás vagy másik 3DS-hez tartozik). Hozd létre újra az F00D43D5.bin fájlod a BannerBomb3 Injector segítségével, biztosítva azt, hogy a konzolod movable.sed fájlját használod hozzá.
-
-
-
Boot9strap telepítése (Fredtool-Inject)
-
-
-Hiba a DSiHaxInjector oldalon
-
-
Biztosítsd, hogy a movable.sed és a DSiWare mentés ugyanarról a konzolról származik. Egy eltérés hibához vezet.
-
-
-
-A "Haxxxxxxxxx!" nem jelenik meg
-
-
Probléma van a 42383821.bin fájloddal (nem jó, hiányzik, rossz helyen van vagy sérült). Hozd létre újra a fájljaid a DSIHaxInjector_new weboldallal és rakd a 42383821.bin fájlt output.zip -> hax-ból a Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare könyvtárba.
-
-
-
-A DSiWare normálisan indul
-
-
A Haxxxxxxxxx! nem lett átmásolva az SD kártyádról a rendszer memóriába.
A Flipnote-nak hosszú időre lehet szüksége a kártya indexeléséhez, ha nagy méretű SD kártyád van. Várj még néhány percet.
-
-
-
-Lenny arc nem jelenik meg az SD kártya szekcióban
-
-
Nem másoltad át a private mappát a Frogminer_save .zip-ből az SD kártyád gyökerébe.
-
-
-
-A Flipnote lefagy
-
-
Véletlenül hozzáértél az érintőképernyőhöz, miközben bent voltál a módosított Flipnote-ban. Add meg újra DS Connection Settings értékeit és próbáld újra, biztosítva azt hogy véletlenül sem használod az érintőképernyőt.
-
-
-
-Zöld képernyő beillesztés után
-
-
A boot.nds fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az b9stool-nak és rakd a boot.nds fájlt az SD kártyád gyökerébe, felülírva a létező fájlt.
-
-
-
-Fehér képernyő beillesztés után
-
Probléma van az boot.nds fájloddal. Töltsd le újra a legutolsó kiadását az b9stool-nak és rakd a boot.nds fájlt az SD kártyád gyökerébe, felülírva a létező fájlt.
-
-
-
-Nem lehetséges a Luma3DS konfigurációs menü megnyitása B9STool futtatása után
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (fekete képernyő szöveggel)
-
-
A 00000001.sav és/vagy otherapp.bin fájljaid rossz helyre lehettek rakva. Biztosítsd, hogy a 00000001.sav a Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data mappában legyen és az otherapp.bin pedig az SD kártyád gyökerében.
-
-
Ha a fájljaid jó helyen vannak, hozd létre újra a mentéseket a PicHaxx Save Tool használatával, majd rakd őket a Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data mappába. Ügyelj arra, hogy a fájl pontosan 00000001.sav nevű legyen és hogy a konzolod movable.sed-jét használd a létrehozáshoz. Töltsd le újra a HBL otherappokat és rakd a konzolod SD kártyájára a releváns .bin fájlt, majd nevezd át otherapp.bin-re. Ne add hozzá a .bin kiterjesztést, ha nem látod.
-
-
-
-"An exception occurred" vagy Errdisp a Picross megnyitásakor
-
-
A konzolod már rendelkezik egyedi firmware-rel. Érdemes elvégezned a CFW ellenőrzését.
-
-
-
-"An error has occurred, forcing the software to close..." (fehér üzenet doboz)
-
-
Probléma van az otherapp.bin fájloddal. Töltsd le a HBL otherappokat és rakd a konzolod SD kártyájára a releváns .bin fájlt, majd nevezd át otherapp.bin-re. Ne add hozzá a .bin kiterjesztést, ha nem látod.
-
-
-
-A játék normálisan indul
-
-
A 00000001.sav fájlod valószínüleg rossz helyen van, vagy nem a jó movable.sed fájlt használtál a létrehozásához. Generáld újra a movable.sed állományod a Bruteforce Movable-vel, tmajd hozd létre újra a mentést PicHaxx Save Tool eszközzel és rakd az eredmény fájlt (00000001.sav) a Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data mappába.
Ha ez sikertelen, próbálkozz egy másik SD kártyával.
-
Boot9strap telepítése (SSLoth-Browser)
-
-
-Piros/lila/rózsaszín és fehér képernyő a browserhax futtatása után
-
-
Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvégezned a CFW ellenőrzését.
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (fekete képernyő szöveggel)
-
-
A arm11code.bin fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az universal-otherapp-nak és rakd az otherapp.bin fájlt az SD kártyád gyökerébe, majd nevezd át arm11code.bin-re. Ne add hozzá a .bin kiterjesztést, ha nem látod.
-
-
-
-"An error has occurred, forcing the software to close..." (fehér üzenet doboz)
-
-
Probléma lehet az arm11code.bin fájloddal. Töltsd le a legutolsó kiadását az [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)-nak és rakd az otherapp.bin fájlt az SD kártyád gyökerébe, majd nevezd át arm11code.bin-re. Ne add hozzá a .bin` kiterjesztést, ha nem látod.
-
-
Megpróbálhatod még alaphelyzetbe állítani a böngésző mentés adatot:
-
-
-
Indítsd el a böngészőt, majd lépj be a beállításokba (browser settings)
-
Görgess a legaljára, majd válaszd a “Reset Save Data” opciót (ami lehet, hogy “Initialize Savedata” vagy “Clear All Save Data” néven fut”)
-
Próbáld meg újra végrehajtani az exploitot
-
-
-
-
-
-A browserhax QR kód vagy URL megnyitásásakor összeomlik
-
-
A böngésző alapú exploitok (mint például ez) gyakran instabilak és sokszor lefagynak, de néha megjavíthatók az alábbi lépések végrehajtásával.
-
-
-
Indítsd el a böngészőt, majd lépj be a beállításokba (browser settings)
-
Görgess a legaljára, majd válaszd a “Reset Save Data” opciót (ami lehet, hogy “Initialize Savedata” vagy “Clear All Save Data” néven fut”)
-
Próbáld meg újra végrehajtani az exploitot
-
-
-
-
-Rendszerfrissítés (System Update) ugrik fel, amikor megnyitom a böngészőt
-
-
Az SSLoth proxy nem lett megfelelően konfigurálva. Csináld újra az SSLoth fejezetet erről az oldalról.
Probléma lehet az arm11code.bin fájloddal. Töltsd le újra a legutolsó kiadását az [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)-nak és rakd a fájlt az SD kártyád gyökerébe, majd nevezd át arm11code.bin-re. Ne add hozzá a .bin` kiterjesztést, ha nem látod.
-
-
-
-"PrepareArm9ForTwl returned error c8804631!"
-
-
Mentsd az adataidat, majd formázd újra az SD kártyád FAT32 formátumra, az ajánlott alkalmazással az operációs rendszerednek megfelelően. (Windows, macOS, Linux). A MiniTool Partition Wizard-ról és a HP formázó eszközről (HPUSBDisk) ismert, hogy problémákat okoznak a 3DS SD kártyákkal.
-
-
Ha ez sikertelen, próbálkozz egy másik SD kártyával.
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-"An error has occurred. Please save your data in any software currently in use, then restart the system."
-
-
A dátum nincs megfelelően beállítva. A helyes beállításokhoz kövesd ezeket a lépéseket:
-
-
-
Válaszd a System Settings ikont a HOME Menüben és nyomj Open-t.
-
Érintsd meg az Other Settings-t.
-
Érintsd meg a Date & Time-ot.
-
Érintsd me a Today’s date-et.
-
A fel/le nyilakkal állítsd be a helyes napot, hónapot és évet.
-
Nyomj OK-t a jóváhagyáshoz.
-
-
-
Ha a probléma továbbra is fennáll:
-
-
-
Legyél biztos abban, hogy az arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, és a boot.3dsx fájlok megtalálhatók az SD kártya gyökerében (nem pedig egy mappában)
-
Legyél biztos abban, hogy a régiódnak ÉS a rendszerednek megfelelő payload-ot választottad
-
Legyél biztos abban, hogy a régiós beállításaid így néznek ki
-
Próbáld meg törölni a böngésző adatot:
-
-
Indítsd el a böngészőt, majd lépj be a beállításokba (browser settings)
-
Görgess a legaljára, majd válaszd a “Reset Save Data” opciót (ami lehet, hogy “Initialize Savedata” vagy “Clear All Save Data” néven fut”)
-
Próbáld meg újra végrehajtani az exploitot
-
-
-
Próbáld meg módosítani a rendszer nyelvét valami másra mint az aktuális nyelv
-
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (fekete képernyő szöveggel)
-
-
A arm11code.bin fájl hiányzik, vagy rossz helyen van. Biztosítsd, hogy super-skaterhax legfrissebb verziójából régiódhoz és verziódhoz tartozó fájlokat az SD kártya gyökerébe másold (nem egy mappán belülre).
-
-
-
-
-
-
-Egy exception történik vagy "DLL_HEAP_INFORMATION" a GO! megnyomásakor! GO!
-
-
Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvégezned a CFW ellenőrzését.
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -983,6 +571,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1082,7 +679,7 @@ window.cookieconsent.initialise({
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
-
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
+
+
+"An error has occurred. Please save your data in any software currently in use, then restart the system."
+
+
A dátum nincs megfelelően beállítva. A helyes beállításokhoz kövesd ezeket a lépéseket:
+
+
+
Válaszd a System Settings ikont a HOME Menüben és nyomj Open-t.
+
Érintsd meg az Other Settings-t.
+
Érintsd meg a Date & Time-ot.
+
Érintsd me a Today’s date-et.
+
A fel/le nyilakkal állítsd be a helyes napot, hónapot és évet.
+
Nyomj OK-t a jóváhagyáshoz.
+
+
+
Ha a probléma továbbra is fennáll:
+
+
+
Legyél biztos abban, hogy az arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, és a boot.3dsx fájlok megtalálhatók az SD kártya gyökerében (nem pedig egy mappában)
+
Legyél biztos abban, hogy a régiódnak ÉS a rendszerednek megfelelő payload-ot választottad
+
Legyél biztos abban, hogy a régiós beállításaid így néznek ki
+
Próbáld meg törölni a böngésző adatot:
+
+
Indítsd el a böngészőt, majd lépj be a beállításokba (browser settings)
+
Görgess a legaljára, majd válaszd a “Reset Save Data” opciót (ami lehet, hogy “Initialize Savedata” vagy “Clear All Save Data” néven fut”)
+
Próbáld meg újra végrehajtani az exploitot
+
+
+
Próbáld meg módosítani a rendszer nyelvét valami másra mint az aktuális nyelv
+
+
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (fekete képernyő szöveggel)
+
+
A arm11code.bin fájl hiányzik, vagy rossz helyen van. Biztosítsd, hogy super-skaterhax legfrissebb verziójából régiódhoz és verziódhoz tartozó fájlokat az SD kártya gyökerébe másold (nem egy mappán belülre).
+
+
+
+
+
+
+Egy exception történik vagy "DLL_HEAP_INFORMATION" a GO! megnyomásakor! GO!
+
+
Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvégezned a CFW ellenőrzését.
+
+
+
+
Boot9strap telepítése (SSLoth-Browser)
+
+
+Piros/lila/rózsaszín és fehér képernyő a browserhax futtatása után
+
+
Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvégezned a CFW ellenőrzését.
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (fekete képernyő szöveggel)
+
+
A arm11code.bin fájl hiányzik, vagy rossz helyen van. Töltsd le a legutolsó kiadását az universal-otherapp-nak és rakd az otherapp.bin fájlt az SD kártyád gyökerébe, majd nevezd át arm11code.bin-re. Ne add hozzá a .bin kiterjesztést, ha nem látod.
+
+
+
+"An error has occurred, forcing the software to close..." (fehér üzenet doboz)
+
+
Probléma lehet az arm11code.bin fájloddal. Töltsd le a legutolsó kiadását az [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)-nak és rakd az otherapp.bin fájlt az SD kártyád gyökerébe, majd nevezd át arm11code.bin-re. Ne add hozzá a .bin` kiterjesztést, ha nem látod.
+
+
Megpróbálhatod még alaphelyzetbe állítani a böngésző mentés adatot:
+
+
+
Indítsd el a böngészőt, majd lépj be a beállításokba (browser settings)
+
Görgess a legaljára, majd válaszd a “Reset Save Data” opciót (ami lehet, hogy “Initialize Savedata” vagy “Clear All Save Data” néven fut”)
+
Próbáld meg újra végrehajtani az exploitot
+
+
+
+
+
+A browserhax QR kód vagy URL megnyitásásakor összeomlik
+
+
A böngésző alapú exploitok (mint például ez) gyakran instabilak és sokszor lefagynak, de néha megjavíthatók az alábbi lépések végrehajtásával.
+
+
+
Indítsd el a böngészőt, majd lépj be a beállításokba (browser settings)
+
Görgess a legaljára, majd válaszd a “Reset Save Data” opciót (ami lehet, hogy “Initialize Savedata” vagy “Clear All Save Data” néven fut”)
+
Próbáld meg újra végrehajtani az exploitot
+
+
+
+
+Rendszerfrissítés (System Update) ugrik fel, amikor megnyitom a böngészőt
+
+
Az SSLoth proxy nem lett megfelelően konfigurálva. Csináld újra az SSLoth fejezetet erről az oldalról.
Probléma lehet az arm11code.bin fájloddal. Töltsd le újra a legutolsó kiadását az [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)-nak és rakd a fájlt az SD kártyád gyökerébe, majd nevezd át arm11code.bin-re. Ne add hozzá a .bin` kiterjesztést, ha nem látod.
+
+
+
+"PrepareArm9ForTwl returned error c8804631!"
+
+
Mentsd az adataidat, majd formázd újra az SD kártyád FAT32 formátumra, az ajánlott alkalmazással az operációs rendszerednek megfelelően. (Windows, macOS, Linux). A MiniTool Partition Wizard-ról és a HP formázó eszközről (HPUSBDisk) ismert, hogy problémákat okoznak a 3DS SD kártyákkal.
+
+
Ha ez sikertelen, próbálkozz egy másik SD kártyával.
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
-
-
-
-
-
-
Fontos tudnivalók
-
-
A Seedminer exploit használatához frissítened kell a konzolod a legutolsó rendszer verzióra.
-
-
Amire szükséged lesz
-
-
-
Internet elérés a konzolodon
-
-
-
I. rész - A rendszer frissítése
-
-
-
Frissítsd a konzolod következőképp: Lépj be a System Settings-be, majd az “Other settings”-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a “System Update” opciót
-
-
A frissítő elképzelhető, hogy megjeleníti a “Your system is up to date” üzenetet a frissítés helyett. Ez normális, ha már frissítettél; folytasd a következő szakasszal
-
Ha ez hibát ad, akkor állítsd a DNS és Proxy beállításodat egyaránt “Auto”-ra
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
-
-
-
-
-
-
Fontos tudnivalók
-
-
A super-skaterhax exploit használatához frissítened kell a konzolod a legutolsó rendszer verzióra.
-
-
Amire szükséged lesz
-
-
-
Internet elérés a konzolodon
-
-
-
I. rész - A rendszer frissítése
-
-
-
Frissítsd a konzolod következőképp: Lépj be a System Settings-be, majd az “Other settings”-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a “System Update” opciót
-
-
A frissítő elképzelhető, hogy megjeleníti a “Your system is up to date” üzenetet a frissítés helyett. Ez normális, ha már frissítettél; folytasd a következő szakasszal
-
Ha ez hibát ad, akkor állítsd a DNS és Proxy beállításodat egyaránt “Auto”-ra
Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat.
-
-
-
-
-
-
Fontos tudnivalók
-
-
Az MSET9 exploit használatához frissítened kell a konzolod a legutolsó rendszer verzióra.
-
-
Amire szükséged lesz
-
-
-
Internet elérés a konzolodon
-
-
-
I. rész - A rendszer frissítése
-
-
-
Frissítsd a konzolod következőképp: Lépj be a System Settings-be, majd az “Other settings”-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a “System Update” opciót
-
-
A frissítő elképzelhető, hogy megjeleníti a “Your system is up to date” üzenetet a frissítés helyett. Ez normális, ha már frissítettél; folytasd a következő szakasszal
-
Ha ez hibát ad, akkor állítsd a DNS és Proxy beállításodat egyaránt “Auto”-ra
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
MSET9 è attualmente l’unico exploit per console 3DS / 3DS XL / 2DS con versione del software 11.7.0 gratuito e che non richiede alcun software esterno. Se non sei in grado di usarlo, dovrai utilizzare uno di questi altri metodi, che hanno un prerequisito di qualche sorta.
-
-
Titoli eShop installati
-
-
Poiché Nintendo eShop non consente più gli acquisti, non è più possibile acquistare nuovi titoli. Tuttavia, puoi ri-scaricare un titolo se l’hai acquistato o scaricato prima del blocco degli acquisti.
-
-
Uno qualunque dei seguenti titoli può essere utilizzato in combinazione con Seedminer per installare un custom firmware:
-
-
Mario Kart 7 (titolo comunemente preinstallato; funziona anche una cartuccia fisica)
-
Pokémon Picross (gratuito; solo in formato digitale)
-
Steel Diver: Sub Wars (gratuito; solo in formato digitale)
-
QUALSIASI titolo DSiWare (gratuito o a pagamento; solo in formato digitale)
In alternativa, SmileBASIC (un gioco a pagamento; solo in formato digitale) può essere utilizzato per accedere all’Homebrew Launcher senza utilizzare Seedminer.
Se hai una copia della versione 2.2 US del gioco DSiWare Petit Computer (a pagamento; solo digitale) è possibile utilizzarla per installare boot9strap.
Questo metodo richiede che una flashcart DS compatibile venga flashata con ntrboot, che funziona su tutte le console della famiglia 3DS indipendentemente dal modello o dalla regione.
-
-
Se nessuna delle altre opzioni precedenti ti sono disponibili, questa è l’opzione alternativa più economica. Se non hai già una flashcart compatibile, è possibile acquistarne una pre-flashata con ntrboot qui per circa 20 Euro.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
Lettura necessaria
-
-
Per eseguire un dump dei DSiWare di sistema, approfittiamo di una falla di sicurezza nella sezione Gestione Nintendo DSiWare dell’applicazione Impostazioni della console.
-
-
Per realizzare l’obiettivo, utilizziamo la chiave di cifratura della tua console (movable.sed) per generare un backup DSiWare che induce la console a creare un dump dell’applicazione Impostazioni Internet DSi nella directory principale della scheda SD.
-
-
Una volta ottenuto un backup DSiWare, si può initiettare nella “Modalità download” un titolo DSiWare utilizzabile per installare un custom firmware.
-
-
Queste istruzioni sono SOLO per le console taiwanesi (indicate da una T alla fine della versione di sistema, ad esempio 11.16.0-39T)! Se la tua console proviene da qualsiasi altra regione, scegli l’altro metodo.
L’ultima versione di Frogminer_save (Frogminer_save.zip)
-
-
-
Sezione I - Controllo del CFW
-
-
Come precauzione aggiuntiva, controlleremo anche la presenza di un custom firmware. È necessario poiché se un custom firmware fosse già installato, questo metodo rischierebbe di brickare la console (rendendola inutilizzabile in assenza di metodi di ripristino come ntrboot).
-
-
-
Spegni la tua console
-
Premi il pulsante (Select)
-
Accendi la tua console continuando a tenere premuto il pulsante (Select)
-
Se il controllo è andato a buon fine, verrà avviato il menu HOME e potrai procedere con questa guida
-
Spegni la tua console
-
-
-
Se vedi un menu di configurazione o la console si spegne, hai già il CFW, e proseguire seguendo queste istruzioni può BRICKARE la console! Procedi con la Verifica del CFW per aggiornare il tuo CFW esistente.
-
-
Sezione II - Preparazione
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Copia il file boot.nds (B9STool) dall’archivio .zip di b9sTool nella directory principale della tua scheda SD
-
Copia la cartella private presente nell’archivio .zip di Frogminer_save nella directory principale della tua scheda SD
-
Tieni la scheda SD nel tuo computer - ci sono altre cose da fare nella prossima sezione
Crea una cartella chiamata Nintendo DSiWare all’interno di <ID1>
-
-
Se hai già la cartella e sono già presenti dei file di backup DSiWare (<id-a-8-caratteri>.bin) all’interno, copiali sul computer e rimuovili dalla scheda SD
-
-
-
Apri il file .zip output_(nome) e naviga su China_Taiwan -> output_setup
-
Copia tutti i sei file .bin nella cartella Nintendo DSiWare
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare -> Scheda SD -> (pagina 2)
-
Prendi nota del numero sul titolo DSiWare nella seconda pagina (sarà un numero compreso tra 1 e 6)
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Apri il file .zip output_(nome) e naviga su China_Taiwan -> output_hax
-
Copia il file .bin con lo stesso numero di quello nella seconda pagina del menu “Gestione Nintendo DSiWare” nella cartella Nintendo DSiWare, e sovrascrivi quando richiesto
-
Accendi la tua console
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
-
Attendi
-
-
Dovrebbero succedere in ordine le seguenti cose: Una barra di caricamento, un breve blocco, lo schermo inferiore viola, l’arresto della musica, infine la console mostrerà un errore e si riavvierà
-
Se non hai visto lo schermo viola, qualcosa è andato storto
-
-
-
Ora dovresti avere il file 42383821.bin nella directory principale della tua scheda SD
-
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Elimina tutti i file .bin dalla cartella Nintendo DSiWare
Sotto il campo “Username” inserisci un nome alfanumerico qualunque (senza spazi o caratteri speciali)
-
-
Ti conviene inserire un nome diverso per differenziarlo dall’output di BannerBomb3
-
-
-
Sul campo “DSiBin”, carica il tuo file 42383821.bin usando la prima opzione “Browse…”
-
Sul campo “MovableSed”, carica il tuo file movable.sed usando la seconda opzione “Browse…”
-
Sul campo “InjectionTarget”, imposta l’obiettivo dell’iniezione su DSdownloadplay (NON memorypit)
-
Clicca “Build”
-
-
Attendi qualche secondo che termini il processo di compilazione
-
-
-
Nella sezione “Build History” a sinistra, inserisci l’Username nel campo “Filter Builds”
-
Clicca sul primo risultato della ricerca
-
-
Dovrebbe avere la data più recente
-
-
-
Clicca il link “output_(name).zip”
-
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Copia il file 484E4441.bin dalla cartella hax dall’archivio DSiWare appena scaricato (output_(name).zip) nella cartella Nintendo DSiWare
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare
-
Nella sezione “Scheda SD”, scegli il titolo “Haxxxxxxxxx!”
-
Seleziona “Copia”, quindi “OK”
-
-
-
Sezione V - Exploit Flipnote
-
-
In questa sezione, eseguirai una serie passaggi molto specifici da fare in Flipnote Studio che, se fatti correttamente, farà partire b9sTool, l’installer di boot9strap (custom firmware).
-
-
Se desideri una guida visiva per questa parte, è disponibile qui.
-
-
-
Esci da Impostazioni della console
-
Avvia “Modalità download” sulla tua console (l’icona arancione con un 3DS)
-
Seleziona “Nintendo DS”
-
Se l’exploit ha avuto successo, la tua console avrà caricato la versione JPN di Flipnote Studio
-
Completa la configurazione iniziale del gioco finché non avrai raggiunto il menu principale
-
-
Seleziona l’opzione di sinistra quando richiesto durante la configurazione
-
Se riscontri un problema durante questa sezione, cerca in questa guida il tuo problema
-
-
-
Con il touch screen, seleziona il riquadro grande a sinistra, poi il riquadro con l’icona di una scheda SD
-
Al termine del caricamento del menu, scegli l’icona col volto, poi premi l’icona in basso a destra per proseguire
-
Premi (X) o (SU) sul D-Pad a seconda di cosa sia visualizzato sullo schermo superiore
-
Seleziona il secondo pulsante in cima, con l’icona di una pellicola
-
Scorri a destra fino a visualizzare la bobina “3/3”
-
Seleziona il terzo riquadro con la lettera “A” all’interno
-
Scorri a sinistra fino a visualizzare la bobina “1/3”
-
Seleziona il quarto riquadro con la lettera “A” all’interno
-
Se l’exploit ha funzionato, la tua console avvierà b9sTool
-
-
-
Sezione VI - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Usando il D-Pad, vai su “Install boot9strap”
-
-
Se salti questo passaggio, la console si riavvierà nel menu HOME senza aver installato boot9strap, e sarà necessario ricominciare dalla sezione precedente
-
-
-
Premi (A), quindi premi START e SELECT contemporaneamente per avviare il processo
-
Una volta finito e nello schermo inferiore c’è scritto “done.”, esci da b9sTool e spegni la console
-
-
Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
Se vedi la schermata di Luma, spegni la console e prosegui alla prossima sezione
-
-
-
-
-
Sezione VII - Configurazione di Luma3DS
-
-
-
Premi (Select) e accendi la tua console continuando a tenerlo premuto
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
Sezione VIII - Ripristino della Modalità Download DS
-
-
-
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Copia il file 484E4441.bin dalla cartella clean dall’archivio DSiWare appena scaricato (output_(name).zip) nella cartella Nintendo DSiWare`
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare
-
Nella sezione “Scheda SD”, scegli il titolo “Haxxxxxxxxx!”
-
Seleziona “Copia”, quindi “OK”
-
Esci da Impostazioni della console
-
Spegni la tua console
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
-
Per avviare codice non ufficiale, approfittiamo di una falla di sicurezza nella sezione Gestione Nintendo DSiWare dell’applicazione Impostazioni della console.
-
-
A questo scopo, useremo la chiave di crittografia della tua console (movable.sed) per generare un backup DSiWare che possa essere avviato dalla console.
Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo.
-
-
Se hai una console taiwanese (indicata da una T dopo la versione di sistema), segui invece questa pagina.
-
-
Cosa serve
-
-
-
Il tuo file movable.sed dalla sezione Seedminer
-
L’ultima versione di BannerBomb3 (Release_v3.0.zip, download diretto)
-
-
-
Sezione I - Preparazione
-
-
In questa sezione, copierai i file necessari per attivare l’exploit BannerBomb3 nella scheda SD della tua console.
Carica il tuo file movable.sed scegliendo l’opzione “Choose File”
-
Seleziona “Build and Download”
-
-
Verrà scaricato un exploit DSiWare chiamato F00D43D5.bin, all’interno di un archivio zip (BannerBomb3.zip)
-
-
-
Copia il file bb3.bin dall’archivio Release_v3.0.zip nella directory principale della scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
Questo file non ha bisogno di essere aperto o estratto
-
-
-
-
Copia il file Launcher.dat dalla cartella per il modello e la regione della tua console all’interno dell’archivio Release .zip nella directory principale della tua scheda SD
-
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1>
-
-
<ID0> è il nome a 32 lettere della cartella che hai copiato in Seedminer
-
<ID1> è una cartella dal nome lungo 32 caratteri all’interno di <ID0>
Crea una cartella chiamata Nintendo DSiWare all’interno di <ID1>
-
-
Se hai già la cartella e sono già presenti dei file di backup DSiWare (<id-a-8-caratteri>.bin) all’interno, copiali sul computer e rimuovili dalla scheda SD
-
-
-
Copia il file F00D43D5.bin da BannerBomb3.zip nella cartella Nintendo DSiWare
-
-
-
-
-
Sezione II - BannerBomb3
-
-
In questa sezione attiverai l’exploit BannerBomb3 utilizzando il menu Gestione Nintendo DSiWare con il quale installerai l’exploit menuhax67.
-
-
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
-
-
La tua console dovrebbe mostrare il menu BB3 multihax
-
-
-
Usa il D-Pad per spostarti sul menu “Install *hax”, quindi premi il pulsante (A)
-
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
-
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda. I metodi sui firmware precedenti sono più facili e più stabili.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Sia New3DS sia Old3DS ora hanno metodi totalmente gratuiti che (per la maggior parte) non richiedono hardware o software esterni.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Sì, puoi ancora installare un custom firmware sul tuo 3DS, anche dopo la chiusura dell’eShop.
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
-
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda. I metodi sui firmware precedenti sono più facili e più stabili.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Sia New3DS sia Old3DS ora hanno metodi totalmente gratuiti che (per la maggior parte) non richiedono hardware o software esterni.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
freakyhax è un exploit per il gioco Freakyforms Deluxe scoperto e rilasciato da plutooo. Funziona sulle versioni da 9.0.0 a 11.17.0 su console EUR, USA e JPN.
-
-
-
-
Questo metodo richiede una fotocamera 3DS funzionante.
-
-
Cosa serve
-
-
-
Una copia EUR/USA/JPN di Freakyforms Deluxe (da eShop o scheda di gioco)
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
L’ultima versione di HBL otherapps (download diretto)
-
-
-
Istruzioni
-
-
Sezione I - Preparazione
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Copia tutti i file e le cartelle all’interno della cartella /build/<la tua console e regione>/exploit/ dall’archivio .zip di freakyhax nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Copia il file di payload otherapp per il modello/regione/versione dall’archivio otherapps_with_CfgS_11.17.zip nella directory principale della tua scheda SD, quindi rinomina il payload in otherapp.bin
-
-
Non aggiungere l’estensione .bin se non la vedi presente
-
-
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
-
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
-
-
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
-
-
-
-
-
-
-
-
Sezione II - freakyhax
-
-
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
Avvia Freakyforms Deluxe
-
Nel menu di gioco, seleziona Play -> Camera -> Load a QR code
-
Seleziona il codice QR
-
La tua console avvierà l’Homebrew Launcher
-
Avvia nimdsphax dalla lista degli homebrew
-
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
-
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
-
-
-
-
-
Sezione III - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
-
-
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
-
-
-
Una volta completato tutto, premi (A) per riavviare la console
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
-
Seedminer utilizza il tuo file movable.sed per decriptare un qualunque titolo DSiWare per iniettare una particolare applicazione DSiWare nell’applicazione Connessioni Nintendo DS.
-
-
Questa è un’implementazione funzionante dell’exploit del “testo in chiaro noto nelle partizioni FIRM” spiegato qui.
-
-
-
-
Dovresti essere arrivato a questa pagina solo se esegui la versione di sistema 11.17.0. Se hai una versione del software diversa da 11.17.0 o 11.16.0, FERMATI SUBITO poiché queste istruzioni BRICKERANNO LA TUA CONSOLE con altri firmware!!
L’ultima versione di Frogminer_save (Frogminer_save.zip)
-
Utenti con 11.16.0 o 11.17.0: La versione v6.1.1 di b9sTool
-
-
Assicurati assolutamente di avere una di queste versioni del software, in quanto qualunque altra versione causerà un BRICK
-
-
-
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
-
-
Sezione I - Controllo del CFW
-
-
Come precauzione aggiuntiva, controlleremo anche la presenza di un custom firmware. È necessario poiché se un custom firmware fosse già installato, questo metodo rischierebbe di brickare la console (rendendola inutilizzabile in assenza di metodi di ripristino come ntrboot).
-
-
-
Spegni la tua console
-
Premi il pulsante (Select)
-
Accendi la tua console continuando a tenere premuto il pulsante (Select)
-
Se il controllo è andato a buon fine, verrà avviato il menu HOME e potrai procedere con questa guida
-
Spegni la tua console
-
-
-
Se vedi un menu di configurazione o la console si spegne, hai già il CFW, e proseguire seguendo queste istruzioni può BRICKARE la console! Procedi con la Verifica del CFW per aggiornare il tuo CFW esistente.
-
-
Sezione II - Preparazione
-
-
In questa sezione copierai i file necessari per sostituire temporaneamente “Impostazioni di collegamento” con Flipnote Studio, usato per lanciare l’installer di boot9strap (custom firmware).
Sotto il campo “Username” inserisci un nome alfanumerico qualunque (senza spazi o caratteri speciali)
-
Sul il campo “DSiBin”, carica il tuo file backup DSiWare (ad esempio 42383841.bin) presente nella directory principale della tua scheda SD usando la prima opzione “Browse…”
-
Sul campo “MovableSed”, carica il tuo file movable.sed usando la seconda opzione “Browse…”
-
Sul campo “InjectionTarget”, imposta l’obiettivo dell’iniezione su DSinternet (NON memorypit)
-
Clicca “Build”
-
-
Attendi qualche secondo che termini il processo di compilazione
-
-
-
Nella sezione “Build History” a sinistra, inserisci l’Username nel campo “Filter Builds”
-
Clicca sul primo risultato della ricerca
-
-
Dovrebbe avere la data più recente
-
-
-
Clicca il link “output_(name).zip”
-
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
-
<ID0> è il nome a 32 lettere della cartella che hai copiato in Seedminer
-
<ID1> è una cartella dal nome lungo 32 caratteri all’interno di <ID0>
-
-
-
Copia il file 42383841.bin dalla cartella hax dall’archivio DSiWare appena scaricato (output_(name).zip) nella cartella Nintendo DSiWare
-
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Copia il file boot.nds (B9STool) dall’archivio .zip di b9sTool nella directory principale della tua scheda SD
-
Copia la cartella private presente nell’archivio .zip di Frogminer_save nella directory principale della tua scheda SD
-
Reinserisci la scheda SD nella tua console
-
-
Accendi la tua console
-
-
-
-
-
-
Sezione III - Sovrascrittura delle Impostazioni di collegamento DS
-
-
In questa sezione copierai il DSiWare modificato “Impostazioni di collegamento DS” nella memoria interna, che verrà così temporaneamente sostituito da Flipnote Studio.
-
-
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
In questa sezione, eseguirai una serie passaggi molto specifici da fare in Flipnote Studio che, se fatti correttamente, farà partire b9sTool, l’installer di boot9strap (custom firmware).
-
-
Se desideri una guida visiva per questa parte, è disponibile qui.
-
-
-
Ritorna al menu principale delle Impostazioni della console
-
Entra in Impostazioni Internet -> Connessioni Nintendo DS, quindi seleziona “OK” (immagine)
-
Se l’exploit ha avuto successo, la tua console avrà caricato la versione JPN di Flipnote Studio
-
Completa la configurazione iniziale del gioco finché non avrai raggiunto il menu principale
-
-
Seleziona l’opzione di sinistra quando richiesto durante la configurazione
-
Se riscontri un problema durante questa sezione, cerca in questa guida il tuo problema
-
-
-
Con il touch screen, seleziona il riquadro grande a sinistra, poi il riquadro con l’icona di una scheda SD
-
Al termine del caricamento del menu, scegli l’icona col volto, poi premi l’icona in basso a destra per proseguire
-
Premi (X) o (SU) sul D-Pad a seconda di cosa sia visualizzato sullo schermo superiore
-
Seleziona il secondo pulsante in cima, con l’icona di una pellicola
-
Scorri a destra fino a visualizzare la bobina “3/3”
-
Seleziona il terzo riquadro con la lettera “A” all’interno
-
Scorri a sinistra fino a visualizzare la bobina “1/3”
-
Seleziona il quarto riquadro con la lettera “A” all’interno
-
Se l’exploit ha funzionato, la tua console avvierà b9sTool
-
-
-
Sezione V - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Usando il D-Pad, vai su “Install boot9strap”
-
-
Se salti questo passaggio, la console si riavvierà nel menu HOME senza aver installato boot9strap, e sarà necessario ricominciare dalla sezione precedente
-
-
-
Premi (A), quindi premi START e SELECT contemporaneamente per avviare il processo
-
Una volta finito e nello schermo inferiore c’è scritto “done.”, esci da b9sTool e spegni la console
-
-
Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
Se vedi la schermata di Luma, spegni la console e prosegui alla prossima sezione
-
-
-
-
-
Sezione VI - Configurazione di Luma3DS
-
-
-
Premi (Select) e accendi la tua console continuando a tenerlo premuto
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
-
-
-
Sezione VII - Ripristino delle Impostazioni di Connessione DS
-
-
In questa sezione ripristinerai “Impostazioni di collegamento DS” nel modo in cui era prima che fosse temporaneamente sostituito con Flipnote Studio in una sezione precedente.
-
-
-
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Copia il file 42383841.bin dalla cartella clean dall’archivio DSiWare appena scaricato (output_(name).zip) nella cartella Nintendo DSiWare, sostituendo quello preesistente
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
-
Per installare boot9strap nella tua console, ne ricaviamo la sua univoca chiave di cifratura. Utilizzeremo perciò un’applicazione chiamata Seedminer per calcolare la chiave di cifratura dati (movable.sed) per la tua console.
-
-
Una volta ottenuto il file movable.sed possiamo modificare i dati della scheda SD del gioco Mario Kart 7 per installare menuhax67, che ci permetterà di accedere all’Homebrew Launcher.
-
-
Una volta ricevuto l’accesso all’Homebrew Launcher, potremo eseguire nimdsphax per installare boot9strap.
-
-
Vedi qui per informazioni su Kartminer7, qui per informazioni su menuhax67, e qui per informazioni su nimdsphax.
-
-
-
-
Cosa serve
-
-
-
Una copia fisica o digitale di Mario Kart 7 aggiornata all’ultima versione (v1.2)
-
-
È possibile aggiornare Mario Kart 7 tramite eShop o accettando la richiesta di aggiornamento all’avvio del gioco
-
-
-
Un computer che esegua Windows, macOS o Linux
-
Il tuo file movable.sed dalla sezione Seedminer
-
L’ultima versione di Kartminer7 (la versione indicata con WINDOWS se hai un computer Windows, o quella indicata con LINUX-macOS se hai un computer macOS o uno basato su Linux)
-
L’ultima versione di boot9strap (download diretto)
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
-
-
Sezione I - Preparazione dei dati di Mario Kart 7
-
-
In questa sezione verranno generati dei dati per Mario Kart 7 dal 3DS per installare l’exploit in un momento successivo.
-
-
-
Reinserisci la scheda SD nella tua console
-
Avvia Mario Kart 7
-
Tocca il pulsante “Canale Mario Kart” in fondo
-
Se richiesto, premi “Avanti” e “OK” a tutte le scelte che vedi
-
Tocca il pulsante “Lista StreetPass” nella parte inferiore dello schermo, al centro
-
Premi il pulsante (Home) per sospendere Mario Kart 7
-
Disabilita le connessioni wireless tramite l’interruttore wireless sul lato della console o tramite le impostazioni del menu HOME (in alto a sinistra) -> comunicazione wireless -> OFF
-
Spegni la tua console
-
-
-
Sezione II - Preparazione Della Scheda SD
-
-
-
Inserisci la scheda SD nel tuo computer
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
-
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
-
-
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
Copia il file menuhax67_installer.3dsx dall’archivio .zip di menuhax nella cartella /3ds/ della tua scheda SD
-
Copia il file Launcher.dat dalla cartella per il modello e la regione della tua console dell’archivio .zip di menuhax nella directory principale della tua scheda SD
-
Mantieni la scheda SD inserita nel tuo computer, in quanto sarà necessaria anche nella prossima sezione
-
-
-
-
-
-
-
Sezione III - Installazione di Kartminer7
-
-
-
Estrai il file .zip di Release_BETA_mk7 da qualche parte sul tuo computer (es. il tuo desktop)
-
Copia il tuo file movable.sed nella cartella resources della cartella Release_BETA_mk7
-
-
Assicurati che il file sia chiamato esattamente movable.sed
-
-
-
Apri la cartella backup all’interno della cartella Release_BETA_mk7
-
Doppio-clicca il file BACKUP corrispondente alla regione della tua console (es. backup_USA se hai una copia USA di Mario Kart 7)
-
-
Se non sei sicuro della regione della tua console, puoi controllare nelle Impostazioni della console. U = USA; E = EUR, J = JPN
-
Se ricevi un messaggio da Windows Defender, fai clic su “Ulteriori informazioni”, “Esegui comunque”, quindi premi qualsiasi tasto per continuare
-
Se il backup è andato a buon fine, dovresti vedere apparire una nuova cartella
-
Se desideri ripristinare questi dati in un secondo momento (dopo il termine di questa guida), inserisci la scheda SD e fai doppio clic sul file RESTORE corrispondente alla regione della tua console
-
-
-
Torna alla cartella Release_BETA_mk7, quindi fai doppio clic sul file corrispondente alla regione della tua console (es. USA se hai una copia USA di Mario Kart 7)
-
Reinserisci la scheda SD nella tua console
-
-
-
Sezione IV - Kartminer7
-
-
-
Accendi la tua console
-
Avvia Mario Kart 7
-
Tocca il pulsante “Canale Mario Kart” in fondo
-
Tocca il pulsante “Lista StreetPass” nella parte inferiore dello schermo, al centro
-
Premi continuamente (A)
-
-
Dovresti arrivare finalmente alla richiesta “Avvia Gara?” e poi i colori nello schermo inferiore dovrebbero passare da rosso a blu a bianco
-
Se vedi le schermate rosso/blu/bianco ma il 3DS si blocca, riavvia e riprova
-
Se non vedi ALCUN colore, cambia la lingua di sistema (se possibile), quindi riprova l’exploit
-
-
-
Se l’exploit è andato a buon fine, il 3DS avrà avviato 3DS ROP xPloit Injector
-
-
-
Sezione V - Installazione di menuhax67
-
-
-
Premi (Y) + (Giù) per installare menuhax67
-
-
La console si spegnerà automaticamente
-
-
-
Accendi la tua console
-
Clicca sull’icona di impostazioni del menu HOME nell’angolo in alto a sinistra dello schermo inferiore ()
-
-
Se la console si blocca per un po’ e poi crasha, assicurati di avere il file Launcher.dat nella directory principale della tua scheda SD
-
-
-
Se l’exploit ha avuto successo, la tua console avrà avviato l’Homebrew Launcher
-
Avvia nimdsphax dalla lista degli homebrew
-
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
-
Se la console si blocca con una schermata rossa, tieni premuto il pulsante POWER fino allo spegnimento, quindi riprova ad eseguire menuhax accendendo la console e toccando l’icona delle impostazioni del menu HOME
-
-
-
-
-
Sezione VI - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
-
-
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
-
-
-
Una volta completato tutto, premi (A) per riavviare la console
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
Sezione VII - Rimozione di menuhax67
-
-
In questa sezione userai l’Homebrew Launcher per rimuovere menuhax67, ed ottenere nuovamente l’accesso alle impostazioni del menu HOME.
-
-
-
Avvia l’applicazione “Modalità download” ()
-
Attendi finché non vedrai i pulsanti Nintendo 3DS e Nintendo DS
-
Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina
-
Seleziona “Miscellaneous options”
-
Seleziona “Switch the hb. title to the current app.”
-
Premi (B) per continuare
-
Premi (B) per tornare al menu principale di Rosalina
-
Premi (B) per uscire dal menu di Rosalina
-
Premi il pulsante HOME per sospendere l’applicazione “Modalità download”
-
Premi il pulsante “Chiudi” sullo schermo inferiore per chiudere l’applicazione “Modalità download”
-
Riavvia l’applicazione “Modalità download”
-
La console dovrebbe ora avviare l’Homebrew Launcher
-
-
Se invece la console rimane ferma nella schermata di caricamento, manca il file boot.3dsx dalla directory principale della tua scheda SD
-
-
-
Avvia menuhax67_installer dalla lista degli homebrew
-
Seleziona REMOVE menuhax67
-
Quando vedi “done.”, premi (A), poi premi (A) su “EXIT to menu”
-
-
-
A questo punto, è possibile riattivare la comunicazione wireless.
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
-
Usiamo BannerBomb3 per installare menuhax67, che ci permette di accedere all’Homebrew Launcher. Da qui, eseguiremo nimdsphax per avviare SafeB9SInstaller.
-
-
Leggi qui per informazioni su nimdsphax e qui per informazioni su menuhax67.
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
-
-
Sezione I - Preparazione
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
-
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
-
-
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
Reinserisci la scheda SD nella tua console
-
-
-
-
-
-
-
-
-
Sezione II - menuhax67
-
-
In questa sezione utilizzerai l’exploit menuhax67 appena installato per avviare nimdsphax, che caricherà SafeB9SInstaller.
-
-
-
Accendi la tua console
-
Clicca sull’icona di impostazioni del menu HOME nell’angolo in alto a sinistra dello schermo inferiore ()
-
-
Se la console si blocca per un po’ e poi crasha, assicurati di avere il file Launcher.dat nella directory principale della tua scheda SD
-
-
-
Se l’exploit ha avuto successo, la tua console avrà avviato l’Homebrew Launcher
-
Avvia nimdsphax dalla lista degli homebrew
-
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
-
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
-
-
-
-
-
Sezione III - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
-
-
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
-
-
-
Una volta completato tutto, premi (A) per riavviare la console
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
Sezione IV - Rimozione di menuhax67
-
-
In questa sezione avvierai l’exploit BannerBomb3 una seconda volta per poter disinstallare l’exploit menuhax67 che hai installato nella Sezione II. Questo renderà nuovamente possibile utilizzare normalmente le impostazioni del menu HOME.
-
-
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Gestione dati -> DSiWare -> Scheda SD (image)
-
Usa il D-Pad per spostarti sul menu “Uninstall *hax”, quindi premi il pulsante (A)
-
-
La tua console si riavvierà automaticamente
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Nella tua scheda SD, entra in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Elimina il file F0D43D5.bin dalla cartella Nintendo DSiWare e dal tuo computer. Questo file non sarà più necessario
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Questo metodo richiede un computer che esegue Windows, Linux o macOS. I telefoni o i tablet NON sono attualmente supportati. Se non hai accesso a un computer, dovrai usare un exploit alternativo.
+
Questo metodo richiede un computer che esegue Windows, Linux o macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
Ninjhax2 è un exploit per il gioco “Cubic Ninja” realizzato da smealum. Questa pagina utilizza una versione aggiornata di ninjhax di zoogie chiamata ninjhax2-dx, che supporta la versione 11.17.0.
-
-
-
Questo metodo richiede una fotocamera 3DS funzionante.
-
-
Questo processo sovrascriverà il tuo file di salvataggio per Cubic Ninja, se ne hai uno.
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
-
-
Istruzioni
-
-
Sezione I - Preparazione
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Copia il file Launcher.dat dalla cartella appropriata per la console dall’archivio .zip di ninjhax2-dx nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
-
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
-
-
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
-
-
-
-
-
-
-
-
Sezione II - ninjhax2-dx
-
-
-
Lancia “Cubic Ninja” la prima volta e seleziona “Crea”
-
Seleziona la regione e l’hardware della tua console
-
Sulla tua console, scansiona il codice QR
-
-
Se il gioco esce al menu HOME, l’exploit è stato installato correttamente
-
-
-
Avvia nuovamente “Cubic Ninja”
-
La tua console avvierà l’Homebrew Launcher
-
Avvia nimdsphax dalla lista degli homebrew
-
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
-
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
-
-
-
-
-
Sezione III - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
-
-
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
-
-
-
Una volta completato tutto, premi (A) per riavviare la console
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
-
Useremo petit-compwner per avviare b9sTool, che installerà boot9strap.
-
-
Vedi qui per maggiori informazioni su petit-compwner.
-
-
-
-
Dovresti essere arrivato a questa pagina solo se esegui la versione di sistema 11.17.0. Se hai una versione del software diversa da 11.17.0 o 11.16.0, FERMATI SUBITO poiché queste istruzioni BRICKERANNO LA TUA CONSOLE con altri firmware!!
-
-
Cosa serve
-
-
-
Utenti con 11.16.0 o 11.17.0: La versione v6.1.1 di b9sTool
-
-
Assicurati assolutamente di avere una di queste versioni del software, in quanto qualunque altra versione causerà un BRICK
-
-
-
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
-
-
Sezione I - Controllo del CFW
-
-
Come precauzione aggiuntiva, controlleremo anche la presenza di un custom firmware. È necessario poiché se un custom firmware fosse già installato, questo metodo rischierebbe di brickare la console (rendendola inutilizzabile in assenza di metodi di ripristino come ntrboot).
-
-
-
Spegni la tua console
-
Premi il pulsante (Select)
-
Accendi la tua console continuando a tenere premuto il pulsante (Select)
-
Se il controllo è andato a buon fine, verrà avviato il menu HOME e potrai procedere con questa guida
-
Spegni la tua console
-
-
-
Se vedi un menu di configurazione o la console si spegne, hai già il CFW, e proseguire seguendo queste istruzioni può BRICKARE la console! Procedi con la Verifica del CFW per aggiornare il tuo CFW esistente.
-
-
Sezione II - Preparazione
-
-
In questa sezione copierai i file necessari per avviare b9sTool, che viene utilizzato per avviare il programma di installazione di boot9strap (custom firmware).
-
-
-
Inserisci la scheda SD nel tuo computer
-
Copia il file boot.nds (B9STool) dall’archivio .zip di b9sTool nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
Reinserisci la scheda SD nella tua console
-
-
Accendi la tua console
-
-
-
-
-
-
Sezione III - petit-compwner
-
-
In questa sezione scansionerai i codici QR necessari per attivare l’exploit petit-compwner.
-
-
-
Apri l’ultima versione di petit-compwner sul tuo computer
-
Sulla tua console, avvia Petit Computer
-
Seleziona File Management
-
Seleziona Read QR Codes
-
Scansiona ogni codice QR in ordine, da 1/5 a 5/5
-
Una volta scansionati tutti i codici QR, esci da File Management
-
Seleziona View Gallery
-
Avvia il programma PWN
-
Se l’exploit ha funzionato, la tua console avvierà b9sTool
-
-
-
Sezione IV - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Usando il D-Pad, vai su “Install boot9strap”
-
-
Se salti questo passaggio, la console si riavvierà nel menu HOME senza aver installato boot9strap, e sarà necessario ricominciare dalla sezione precedente
-
-
-
Premi (A), quindi premi START e SELECT contemporaneamente per avviare il processo
-
Una volta finito e nello schermo inferiore c’è scritto “done.”, esci da b9sTool e spegni la console
-
-
Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
Se vedi la schermata di Luma, spegni la console e prosegui alla prossima sezione
-
-
-
-
-
Sezione V - Configurazione di Luma3DS
-
-
-
Premi (Select) e accendi la tua console continuando a tenerlo premuto
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Questo metodo usa Seedminer per servirsi ulteriormente del tuo file movable.sed e scrivere un file di salvataggio personalizzato per Pokémon Picross, che può essere utilizzato per avviare l’Homebrew Launcher.
-
-
-
Questo processo sovrascriverà il tuo file di salvataggio per Pokémon Picross, se ne hai uno. Se desideri conservare i tuoi dati di gioco Pokémon Picross, dovresti fare un backup del tuo file 00000001.sav prima di sovrascriverlo.
-
-
Cosa serve
-
-
-
Il gioco “Pokémon Picross” installato sulla tua console
-
-
Se lo hai già scaricato in passato, puoi riscaricarlo
-
La scheda SD deve essere inserita nella console per poter installare Pokémon Picross
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
L’ultima versione di HBL otherapps (download diretto)
-
-
-
Istruzioni
-
-
Sezione I - Preparazione
-
-
In questa sezione copierai alcuni dei file che verranno utilizzati per avviare l’Homebrew Launcher.
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
-
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Copia il file di payload otherapp per il modello/regione/versione dall’archivio otherapps_with_CfgS_11.17.zip nella directory principale della tua scheda SD, quindi rinomina il payload in otherapp.bin
-
-
Non aggiungere l’estensione .bin se non la vedi presente
-
-
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
-
-
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
-
-
-
-
-
-
-
-
Sezione II - PicHaxx
-
-
In questa sezione creerai un file di salvataggio modificato per Pokémon Picross che, una volta caricato, avvierà l’Homebrew Launcher nella tua console.
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
-
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
-
-
-
-
-
Sezione III - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
-
-
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
-
-
-
Una volta completato tutto, premi (A) per riavviare la console
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
Questa guida non supporta la versione Giapponese di SmileBASIC. La guida per quella versione può essere trovata qui.
-
-
-Dettagli Tecnici (opzionale)
-
smilehax-IIe è un exploit per il gioco “SmileBASIC” realizzato da zoogie, compatibile con le versioni di sistema da 9.0.0 a 11.17.0 per le console USA/EUR/JPN.
-
-
-
Cosa serve
-
-
Il gioco “SmileBASIC” installato sulla tua console
-
-
Se lo hai già scaricato in passato, puoi riscaricarlo
-
La scheda SD deve essere inserita nella console per poter installare SmileBASIC
-
-
-
L’ultima versione di smilehax-IIe (download diretto)
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
L’ultima versione di HBL otherapps (download diretto)
-
-
-
Istruzioni
-
-
Sezione I - Preparazione
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
-
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Copia il file di payload otherapp per il modello/regione/versione dall’archivio otherapps_with_CfgS_11.17.zip nella directory principale della tua scheda SD, quindi rinomina il payload in otherapp.bin
-
-
Non aggiungere l’estensione .bin se non la vedi presente
-
-
-
Trasferisci il file .wav per la tua regione dall’archivio .zip di Release_sh2e a un dispositivo in grado di riprodurre i file .wav, ad esempio un telefono
-
Copia il file petitcom .icn per la tua regione nella directory principale della tua scheda SD
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
-
-
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
-
-
-
-
-
-
-
-
Sezione II - smilehax
-
-
-
Avvia SmileBASIC
-
-
Aggiorna il gioco se richiesto
-
-
-
Seleziona l’opzione “Publish/Download Projects”
-
Seleziona l’opzione “Download (Receive) using Public Key”
-
Premi il pulsante “Yes”
-
Inserisci la Public Key “NJEQK3A4” usando la tastiera a schermo
-
Premi il pulsante “Sì” per confermare il download di PMODEM141
-
Premi “OK”, poi “Back”, poi “Browse Projects”
-
Seleziona PMODEM141, quindi premi “Select File”
-
Seleziona PMODEM141.PRG, premi “OK”, quindi “Yes” per eseguirlo
-
Seleziona RECEIVE FILE SIMPLEX
-
Prepara il dispositivo per riprodurre il file .wav
-
Mantieni la tua console a 30cm dall’altoparlante del dispositivo che usi per riprodurre il file .wav e usa un volume ragionevole (non alto) per riprodurlo
-
Ora seleziona 300BPS, quindi riproduci il file .wav
-
Al termine, premi “Yes”, quindi premi “OK”
-
Premi il tasto START
-
Seleziona il file SH2E-xxx.TXT, premi OK, quindi “YES” per eseguirlo
-
-
Se ritorni al menu, assicurati di usare l’ultima versione di SmileBASIC
-
-
-
La tua console avvierà l’Homebrew Launcher
-
Avvia nimdsphax dalla lista degli homebrew
-
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
-
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
-
-
-
-
-
Sezione III - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
-
-
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
-
-
-
Una volta completato tutto, premi (A) per riavviare la console
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
Questa guida non supporta la versione USA ed EUR di SmileBASIC. La guida per quella versione può essere trovata qui.
-
-
-Dettagli Tecnici (opzionale)
-
smilehax-IIe è un exploit per il gioco “SmileBASIC” realizzato da zoogie, compatibile con le versioni di sistema da 9.0.0 a 11.17.0 per le console USA/EUR/JPN.
-
-
-
Cosa serve
-
-
Il gioco “SmileBASIC” installato sulla tua console
-
-
Se lo hai già scaricato in passato, puoi riscaricarlo
-
La scheda SD deve essere inserita nella console per poter installare SmileBASIC
-
-
-
L’ultima versione di smilehax-IIe (download diretto)
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
L’ultima versione di HBL otherapps (download diretto)
-
-
-
Istruzioni
-
-
Sezione I - Preparazione
-
-
Assicurati che SmileBASIC sia aggiornato all’ultima versione
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
-
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Copia il file new3ds_JPN.bin o old3ds_JPN.bin (a seconda del modello) da otherapps_with_CfgS_11.17.zip nella directory principale della tua scheda SD, quindi rinomina il payload in otherapp.bin
-
-
Non aggiungere l’estensione .bin se non la vedi presente
-
-
-
Trasferisci il file SH2E-JPN.300.wav dall’archivio .zip di Release_sh2e a un dispositivo in grado di riprodurre i file .wav, ad esempio un telefono
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
-
-
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
Entra nella cartella Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rinomina la cartella 00117200 in _00117200
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
-
-
-
-
-
-
-
-
Sezione II - smilehax
-
-
-
Avvia SmileBASIC
-
-
NON aggiornare il gioco se richiesto
-
-
-
Seleziona l’opzione “Publish/Download Projects”
-
Seleziona l’opzione “Download (Receive) using Public Key”
-
Premi il pulsante “Yes”
-
Inserisci la Public Key “NJEQK3A4” usando la tastiera a schermo
-
Premi il pulsante “Sì” per confermare il download di PMODEM141
-
Premi “OK”, poi “Back”, poi “Browse Projects”
-
Seleziona PMODEM141, quindi premi “Select File”
-
Seleziona PMODEM141.PRG, premi “OK”, quindi “Yes” per eseguirlo
-
Seleziona RECEIVE FILE SIMPLEX
-
Prepara il dispositivo per riprodurre il file .wav
-
Mantieni la tua console a 30cm dall’altoparlante del dispositivo che usi per riprodurre il file .wav e usa un volume ragionevole (non alto) per riprodurlo
-
Ora seleziona 300BPS, quindi riproduci il file .wav
-
Al termine, premi “Yes”, quindi premi “OK”
-
Premi il tasto START
-
Seleziona il file SH2E-JPN.TXT, premi OK, quindi “Yes” per eseguirlo
-
La tua console avvierà l’Homebrew Launcher
-
Avvia nimdsphax dalla lista degli homebrew
-
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
-
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
-
-
-
-
-
Sezione III - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
-
-
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
-
-
-
Una volta completato tutto, premi (A) per riavviare la console
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
Questo metodo usa Seedminer per servirsi ulteriormente del tuo file movable.sed e scrivere un file di salvataggio personalizzato per Steel Diver: Sub Wars, che può essere utilizzato per avviare l’Homebrew Launcher.
-
-
-
Questo processo sovrascriverà il tuo file di salvataggio per Steel Diver: Sub Wars, se ne hai uno. Se desideri conservare i tuoi dati di gioco Steel Diver: Sub Wars, dovresti fare un backup del tuo file 00000001.sav prima di sovrascriverlo.
-
-
Cosa serve
-
-
-
Il gioco “Steel Diver: Sub Wars” installato sulla tua console
-
-
Se lo hai già scaricato in passato, puoi riscaricarlo
-
La scheda SD deve essere inserita nella console per poter installare Steel Diver: Sub Wars
L’ultima versione di Luma3DS (il file .zip di Luma3DS)
-
L’ultima versione di HBL otherapps (download diretto)
-
-
-
Istruzioni
-
-
Sezione I - Preparazione
-
-
In questa sezione copierai alcuni dei file che verranno utilizzati per avviare l’Homebrew Launcher.
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Copia i file boot.firm e boot.3dsx dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-
-
-
Crea una cartella chiamata boot9strap nella directory principale della tua scheda SD
-
Copia i file boot9strap.firm e boot9strap.firm.sha dall’archivio .zip di boot9strap nella cartella /boot9strap/ della tua scheda SD
-
Copia il file SafeB9SInstaller.bin dall’archivio .zip di SafeB9SInstaller nella directory principale della tua scheda SD
-
Copia la cartella steelhax presente nell’archivio Steelhax-release.zip nella directory principale della tua scheda SD
-
Copia il file di payload otherapp per il modello/regione/versione dall’archivio otherapps_with_CfgS_11.17.zip nella directory principale della tua scheda SD, quindi rinominalo in otherapp.bin
-
-
Non aggiungere l’estensione .bin se non la vedi presente
-
-
-
Se assente, crea una cartella chiamata 3ds nella directory principale della tua scheda SD
-
-
Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella Nintendo 3DS generata automaticamente dalla console
-
-
-
Copia la cartella nimdsphax dall’archivio .zip di nimdsphax nella cartella /3ds/ della tua scheda SD
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
-
-
-
-
-
-
-
-
Sezione II - Steelminer
-
-
In questa sezione creerai un file di salvataggio modificato per Steel Diver: Sub Wars che, una volta utilizzato, caricherà l’Homebrew Launcher nella tua console.
-
-
-
Avvia “Steel Diver: Sub Wars” e seleziona un Mii per inizializzare il salvataggio
-
-
Rifiuta l’aggiornamento di gioco quando richiesto
-
Se hai già aggiornato il gioco, rimuovi l’aggiornamento tramite il menu Gestione dati nelle Impostazioni della console
Nella tua scheda SD, entra nella cartella Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> <ID di 8 caratteri della regione> -> data
-
-
Regione EUR: 000d7e00
-
Regione JPN: 000d7c00
-
Regione USA: 000d7d00
-
-
-
Copia il file 00000001.sav appena scaricato nella cartella data della tua scheda SD
-
-
Sovrascrivi il salvataggio precedente quando richiesto
-
-
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
Avvia “Steel Diver: Sub Wars”
-
La tua console avvierà l’Homebrew Launcher
-
Avvia nimdsphax dalla lista degli homebrew
-
Se l’exploit è andato a buon fine, si avvierà SafeB9SInstaller
-
-
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
-
-
-
-
-
Sezione III - Installazione di boot9strap
-
-
In questa sezione installerai il custom firmware sulla tua console.
-
-
-
Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
-
-
Se una sezione nella schermata inferiore ha un testo di colore rosso, e non ti viene richiesto di inserire una combinazione di tasti, segui questa guida per risolvere i problemi
-
-
-
Una volta completato tutto, premi (A) per riavviare la console
-
La tua console dovrebbe aver avviato il menu di configurazione di Luma3DS
-
-
Il menu di configurazione di Luma3DS contiene le impostazioni per il custom firmware Luma3DS. Molte di queste impostazioni possono essere utili per la personalizzazione o per debug
-
Ai fini di questa guida, lascia queste opzioni nelle impostazioni predefinite (non spuntare o deselezionare nulla)
-
Se la tua console si spegne quando cerchi di accenderla, assicurati di aver copiato il file boot.firm dall’archivio .zip di Luma3DS nella directory principale della tua scheda SD
-
-
-
Premi (Start) per salvare e riavviare il 3DS
-
-
-
A questo punto, la console avvierà sempre Luma3DS.
-
-
Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
-
Nella pagina successiva installerai applicazioni homebrew utili per completare la tua installazione.
Se non l’hai già fatto, assicurati di avere una connessione Internet funzionante configurata sulla tua console.
+
+Se la data del tuo sistema non è corretta, questo exploit non funzionerà. Segui i passaggi seguenti per impostare correttamente la data di sistema.
+
+
Avvia le Impostazioni di sistema sulla tua console
+
Seleziona “Impostazioni generali”
+
Entra in “Data e ora” -> “Data”
+
Tocca i pulsanti su/giù per impostare il giorno, il mese e l’anno corretti
+
Premi OK per confermare
+
+
+
Nel menu HOME, premi contemporaneamente i pulsanti dorsali L e R per avviare la fotocamera
Se vengono visualizzate delle richieste, approvale tutte
Se la tua console si blocca con una schermata gialla, tieni premuto il pulsante POWER finché non si spegne, quindi riprova questa sezione
Se la tua console si blocca con una schermata rossa, tieni premuto il pulsante POWER finché non si spegne, riprova il passo 3 della Sezione II, quindi riprova questa sezione
+
Se la tua console mostra “Text” sullo schermo inferiore, hai un Old 3DS e questo exploit non funzionerà sulla tua console
+
+
Ritorna a Cominciamo!, seleziona Old 3DS/2DS come modello e reinserisci la versione del tuo sistema
Se la tua console sta eseguendo Luma 10.2.1 o più recente, è al 100% sicuro aggiornare. Puoi controllare la versione di Luma tenendo premuto (Select) durante l’avvio della console.
Se la tua console ha una versione precedente di Luma, dovresti aggiornarla prima di aggiornare la tua console alla versione 11.17.0.
-
Se la tua console non possiede ancora un custom firmware, NON aggiornare all’ultima versione di sistema, a meno che questa guida non te lo richieda. I metodi sui firmware precedenti sono più facili e più stabili.
-
Se la tua console non modificata è GIÀ alla versione 11.17.0, questa guida è già stata aggiornata per questo caso. Sia New3DS sia Old3DS ora hanno metodi totalmente gratuiti che (per la maggior parte) non richiedono hardware o software esterni.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Se è la prima volta che modifichi un Nintendo 3DS (o non hai esperienza con la tecnologia), continua a leggere! Altrimenti, se hai già qualche esperienza e sai cosa tu stia facendo, prosegui con Cominciamo!.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
-
Per installare boot9strap nella tua console, ne ricaviamo la sua univoca chiave di cifratura. Utilizzeremo perciò un’applicazione chiamata Seedminer per calcolare la chiave di cifratura dati (movable.sed) per la tua console.
-
-
Per ulteriori informazioni sul funzionamento di Seedminer, è possibile consultare questa presentazione.
-
-
Questo metodo utilizza una scheda grafica di fascia alta per eseguire i calcoli necessari. Verrà usato un sito web gestito da volontari per assisterti in questo metodo.
-
-
-
-
Sezione I - Preparazione
-
-
In questa sezione otterrai dal tuo 3DS i dati necessari per scoprire la chiave di crittografia della tua console.
-
-
-
Prima di seguire questa sezione:
-
-
Assicurati di aver acceso la console con la scheda SD inserita almeno una volta per generare i dati necessari
-
Assicurati che la tua console sia collegata a Internet (dovresti vedere un indicatore blu “Internet” nell’angolo in alto a sinistra nel menu HOME)
-
-
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Entra nella cartella Nintendo 3DS della tua scheda SD
-
Copia il nome della cartella a 32 lettere che vedi direttamente all’interno della cartella Nintendo 3DS
-
-
Questo nome a 32 lettere è specifico per il tuo sistema e sarà diverso per ogni console
Se riscontri un errore e vieni rimandato al menu principale, o devi creare un nuovo Mii o la console non può connettersi ai server Nintendo (a causa di un ban o per problemi di connettività)
-
-
-
Sul tuo profilo Mii cerca il “Codice Amico” sullo schermo superiore
-
-
-
Sezione II - Seedminer
-
-
In questa sezione utilizzerai il sito web Bruteforce Movable per recuperare la chiave di crittografia della tua console sotto forma di movable.sed.
Inserisci il Codice Amico della tua console (senza spazi o trattini) nel campo “Your friend code”
-
Incolla il nome di 32 caratteri della cartella della tua console nel campo “Your ID0”
-
-
Non tentare di inserire l’ID0 manualmente, poiché è facile commettere un errore. Assicurati che l’ID0 sia inserito correttamente copiandolo e incollandolo da dove lo hai salvato nella sezione precedente
-
-
-
Seleziona “Go”
-
-
Se il sito va immediatamente al punto 4, la tua richiesta di bruteforce è già stata elaborata correttamente. Puoi scaricare il tuo file movable.sed e continuare con la prossima sezione. Non occorre aggiungere nuovamente il bot
-
-
-
Usa il pulsante “Registra amico” nella tua console per aggiungere il codice amico del bot fornito dal sito web
-
-
Potrebbe venir richiesto di assegnare un nome all’amico, ma il nome scelto è irrilevante
-
-
-
Attendi l’aggiornamento del sito
-
-
Se la pagina non si aggiorna da sola, attendi qualche minuto prima di ricaricarla manualmente una singola volta
-
-
-
Quando il sito avrà elaborato le tue informazioni, avanzerà automaticamente a Step 2: Bruteforce
-
Attendi il termine del processo
-
-
Di solito è veloce (1-5 minuti)
-
Durante questo processo, il bot che hai aggiunto potrebbe non apparire sul tuo 3DS. Finché il sito web si aggiorna, non sarà un problema
Al termine del processo, scarica il tuo file movable.sed dal sito
-
-
Mantieni questo file in quanto ti servirà nella prossima pagina
-
-
-
Spegni la tua console
-
-
-
-
-
Passi successivi
-
-
Seleziona il metodo in base all’applicazione che hai installato sul tuo 3DS. Non importa il metodo che sceglierai, il risultato finale sarà lo stesso.
-
-
Mario Kart 7
-
-
Questo metodo utilizza una scheda di gioco o una copia digitale del gioco Mario Kart 7. Utilizzando il file movable.sed puoi modificare i dati sulla scheda SD di Mario Kart 7 e ottenere l’accesso all’Homebrew Launcher, che verrà usato per exploit successivi.
Se possiedi un qualunque titolo DSiWare sul tuo 3DS, è possibile scaricarlo sulla scheda SD e utilizzarlo per iniettare temporaneamente Flipnote nelle Impostazioni di collegamento DS.
Questo metodo utilizza il gioco Pokémon Picross, un gioco che era gratuito. Utilizzando il file movable.sed puoi creare un file di salvataggio modificato che ti darà accesso all’Homebrew Launcher, che verrà usato per exploit successivi.
Questo metodo utilizza il gioco Steel Diver: Sub Wars, un gioco che era gratuito. Utilizzando il file movable.sed puoi creare un file di salvataggio modificato che ti darà accesso all’Homebrew Launcher, che verrà usato per exploit successivi.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-
-
Questo metodo richiede una GPU ragionevolmente potente (una qualsiasi scheda grafica dedicata degli ultimi anni) e la possibilità di utilizzare una riga di comando. Se non sai cosa sono o non hai l’hardware necessario, unisciti al canale Nintendo Homebrew su Discord, apri il canale “#mii-mining-assistance” e fornisci quanto segue:
-
-
Il tuo codice QR Mii, caricato direttamente su Discord (non scattare uno screenshot o una foto dell’immagine, basta inviare l’immagine HNI_XXXX.JPG stessa)
-
ID0 della tua console (il nome della cartella a 32 caratteri dentro la cartella Nintendo 3DS - consulta questa sezione se ne hai più di uno)
-
Il modello della tua console (ad es. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
L’anno di produzione della tua console; se non lo sai, non indicarlo - non è molto importante
-
-
-
-
-Dettagli Tecnici (opzionale)
-
-
Per installare boot9strap nella tua console, ne ricaviamo la sua univoca chiave di cifratura. Utilizzeremo perciò un’applicazione chiamata Seedminer per calcolare la chiave di cifratura dati (movable.sed) per la tua console.
-
-
Poiché non abbiamo accesso alla lista di amici, ricaviamo la prima parte del file movable.sed tramite il codice QR Mii anziché tramite lo scambio reciproco di amicizia.
-
-
Per ulteriori informazioni sul funzionamento di Seedminer, è possibile consultare questa presentazione.
-
-
-
-
Istruzioni
-
-
Se sei su Linux o macOS, sostituisci py -3 con python3 in tutti i comandi.
-
-
Cosa serve
-
-
-
L’ultima versione di Seedminer (il file .zip di Seedminer)
Se sei su Linux, probabilmente hai già Python 3. Controlla aprendo un terminale e inserendo python3 -V. Se il comando restituisce un numero di versione, funzionerà per questa guida.
-
-
-
-
-
Sezione I - Preparazione
-
-
In questa sezione imposterai Seedminer e otterrai i file della tua console necessari per il mining.
-
-
-
Estrai il contenuto dell’archivio .zip di Seedminer e sposta la cartella con il nome del tuo sistema operativo in qualunque posizione sul tuo computer
-
-
Mantieni questo file a portata di mano, dato che la cartella Seedminer verrà usata per posizionare altri file
-
-
-
Nella cartella Seedminer, tieni premuto Maiusc e fai clic con il tasto destro del mouse in un qualunque punto vuoto della cartella, quindi fai clic sull’opzione che apre il terminale, PowerShell o il prompt dei comandi
-
Nella finestra a riga di comando, digita py -3 -m pip install pycryptodomex, premi INVIO, dopodiché consenti l’installazione
-
-
Se il comando restituisce l’errore No module named pip, devi installare pip manualmente. Troverai le relative istruzioni in questa pagina.
-
-
-
Accendi la console con la scheda SD inserita
-
Apri l’applicazione Centro di creazione Mii
-
Tocca il pulsante “QR Code e immagini”
-
Tocca “Salva QR Code”
-
Seleziona un Mii creato su questa console, NON importato da un’altra console (creane uno nuovo se non ne hai uno) e premi “OK”
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Entra nella cartella Nintendo 3DS della tua scheda SD
-
Copia il nome della cartella a 32 lettere che vedi direttamente all’interno della cartella Nintendo 3DS
-
-
Questo nome a 32 lettere è specifico per il tuo sistema e sarà diverso per ogni console
Clicca su “Import from…”, quindi seleziona “QR Code” e carica il codice QR Mii ottenuto prima
-
Clicca su “Export to…”, quindi seleziona “encrypted (.bin)”
-
-
Verrà scaricato un file chiamato input.bin
-
-
-
Copia questo file input.bin nella cartella Seedminer
-
Apri la finestra del terminale/PowerShell/Prompt dei comandi di prima
-
In questa finestra, inserisci il comando py -3 seedminer_launcher3.py id0 <id0>
-
-
Sostituisci <id0> con l’ID0 che hai copiato precedentemente nel documento
-
Non includere le parentesi angolate
-
Non tentare di inserire l’ID0 manualmente, poiché è facile commettere un errore. Assicurati che l’ID0 sia inserito correttamente copiandolo e incollandolo da dove lo hai salvato nella sezione precedente
-
-
-
Al termine, inserisci il comando py -3 seedminer_launcher3.py mii <modello> <anno>
-
-
Sostituisci <modello> con il modello della tua console (new o old) - se non ne sei sicuro, solo i modelli con i pulsanti ZL/ZR e C-Stick sono “new”
-
Sostituisci <year> con l’anno in cui è stato realizzato il 3DS (sulle console Old 3DS, gli anni sulla parte posteriore, (M)2010/(C)2011, sono sempre gli stessi e NON sono un indicatore usabile) - se non sei sicuro, vedi qui sotto
-
Gli anni di produzione approssimativi sono: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
Puoi anche lasciare vuoto l’anno, per cui partirà dal mezzo
-
Il processo di mining richiede solitamente fino a 90 minuti, a seconda della fortuna e della potenza della tua GPU
-
La prima fase terminerà probabilmente attorno l’offset 1500, a seconda del modello di console
-
Se la seconda fase (dopo il messaggio movable_part2.sed generation success) oltrepassa l’offset 100, verifica di aver inserito l’ID0 corretto. Se il tuo ID0 è corretto, non puoi usare questo metodo e dovrai aggiornare all’ultima versione e controllare se è disponibile per te un metodo non-Seedminer qui
-
Se vedi il messaggio input.bin is invalid size, ricrea il file input.bin utilizzando il tuo codice QR. Se fallisce di nuovo, apri un browser diverso e ricrea il file input.bin
-
Se vedi il messaggio LFCS has been left blank, usa il modello di console opposto (ad es. mii old al posto di mii new)
-
-
-
Al termine, apparirà un file movable.sed nella cartella Seedminer
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
-
-Dettagli Tecnici (opzionale)
-
-
Per installare boot9strap nella tua console, ne ricaviamo la sua univoca chiave di cifratura. Utilizzeremo perciò un’applicazione chiamata Seedminer per calcolare la chiave di cifratura dati (movable.sed) per la tua console.
-
-
Per ulteriori informazioni sul funzionamento di Seedminer, è possibile consultare questa presentazione.
-
-
Questo metodo utilizza una scheda grafica di fascia alta per eseguire i calcoli necessari. Verrà usato un sito web gestito da volontari per assisterti in questo metodo.
-
-
-
-
Sezione I - Preparazione
-
-
In questa sezione otterrai dal tuo 3DS i dati necessari per scoprire la chiave di crittografia della tua console.
-
-
-
Prima di seguire questa sezione:
-
-
Assicurati di aver acceso la console con la scheda SD inserita almeno una volta per generare i dati necessari
-
Assicurati che la tua console sia collegata a Internet (dovresti vedere un indicatore blu “Internet” nell’angolo in alto a sinistra nel menu HOME)
-
-
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Entra nella cartella Nintendo 3DS della tua scheda SD
-
Copia il nome della cartella a 32 lettere che vedi direttamente all’interno della cartella Nintendo 3DS
-
-
Questo nome a 32 lettere è specifico per il tuo sistema e sarà diverso per ogni console
Se riscontri un errore e vieni rimandato al menu principale, o devi creare un nuovo Mii o la console non può connettersi ai server Nintendo (a causa di un ban o per problemi di connettività)
-
-
-
Sul tuo profilo Mii cerca il “Codice Amico” sullo schermo superiore
-
-
-
Sezione II - Seedminer
-
-
In questa sezione utilizzerai il sito web Bruteforce Movable per recuperare la chiave di crittografia della tua console sotto forma di movable.sed.
Inserisci il Codice Amico della tua console (senza spazi o trattini) nel campo “Your friend code”
-
Incolla il nome di 32 caratteri della cartella della tua console nel campo “Your ID0”
-
-
Non tentare di inserire l’ID0 manualmente, poiché è facile commettere un errore. Assicurati che l’ID0 sia inserito correttamente copiandolo e incollandolo da dove lo hai salvato nella sezione precedente
-
-
-
Seleziona “Go”
-
-
Se il sito va immediatamente al punto 4, la tua richiesta di bruteforce è già stata elaborata correttamente. Puoi scaricare il tuo file movable.sed e continuare con la prossima sezione. Non occorre aggiungere nuovamente il bot
-
-
-
Usa il pulsante “Registra amico” nella tua console per aggiungere il codice amico del bot fornito dal sito web
-
-
Potrebbe venir richiesto di assegnare un nome all’amico, ma il nome scelto è irrilevante
-
-
-
Attendi l’aggiornamento del sito
-
-
Se la pagina non si aggiorna da sola, attendi qualche minuto prima di ricaricarla manualmente una singola volta
-
-
-
Quando il sito avrà elaborato le tue informazioni, avanzerà automaticamente a Step 2: Bruteforce
-
Attendi il termine del processo
-
-
Di solito è veloce (1-5 minuti)
-
Durante questo processo, il bot che hai aggiunto potrebbe non apparire sul tuo 3DS. Finché il sito web si aggiorna, non sarà un problema
Al termine del processo, scarica il tuo file movable.sed dal sito
-
-
Mantieni questo file in quanto ti servirà nella prossima pagina
-
-
-
Spegni la tua console
-
-
-
-
-
Passo successivo: BannerBomb3
-
-
Una volta ottenuta la chiave di crittografia della tua console (movable.sed), puoi usarla in combinazione con BannerBomb3, che utilizza il tuo file movable.sed per sfruttare le falle nell’applicazione Impostazioni della console.
Per installare boot9strap nella tua console, ne ricaviamo la sua univoca chiave di cifratura. Utilizzeremo perciò un’applicazione chiamata Seedminer per calcolare la chiave di cifratura dati (movable.sed) per la tua console.
-
-
Per ulteriori informazioni sul funzionamento di Seedminer, è possibile consultare questa presentazione.
-
-
Questo metodo utilizza una scheda grafica di fascia alta per eseguire i calcoli necessari. Verrà usato un sito web gestito da volontari per assisterti in questo metodo.
-
-
-
-
Sezione I - Preparazione
-
-
In questa sezione otterrai dal tuo 3DS i dati necessari per scoprire la chiave di crittografia della tua console.
-
-
-
Prima di seguire questa sezione:
-
-
Assicurati di aver acceso la console con la scheda SD inserita almeno una volta per generare i dati necessari
-
Assicurati che la tua console sia collegata a Internet (dovresti vedere un indicatore blu “Internet” nell’angolo in alto a sinistra nel menu HOME)
-
-
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Entra nella cartella Nintendo 3DS della tua scheda SD
-
Copia il nome della cartella a 32 lettere che vedi direttamente all’interno della cartella Nintendo 3DS
-
-
Questo nome a 32 lettere è specifico per il tuo sistema e sarà diverso per ogni console
Se riscontri un errore e vieni rimandato al menu principale, o devi creare un nuovo Mii o la console non può connettersi ai server Nintendo (a causa di un ban o per problemi di connettività)
-
-
-
Sul tuo profilo Mii cerca il “Codice Amico” sullo schermo superiore
-
-
-
Sezione II - Seedminer
-
-
In questa sezione utilizzerai il sito web Bruteforce Movable per recuperare la chiave di crittografia della tua console sotto forma di movable.sed.
Inserisci il Codice Amico della tua console (senza spazi o trattini) nel campo “Your friend code”
-
Incolla il nome di 32 caratteri della cartella della tua console nel campo “Your ID0”
-
-
Non tentare di inserire l’ID0 manualmente, poiché è facile commettere un errore. Assicurati che l’ID0 sia inserito correttamente copiandolo e incollandolo da dove lo hai salvato nella sezione precedente
-
-
-
Seleziona “Go”
-
-
Se il sito va immediatamente al punto 4, la tua richiesta di bruteforce è già stata elaborata correttamente. Puoi scaricare il tuo file movable.sed e continuare con la prossima sezione. Non occorre aggiungere nuovamente il bot
-
-
-
Usa il pulsante “Registra amico” nella tua console per aggiungere il codice amico del bot fornito dal sito web
-
-
Potrebbe venir richiesto di assegnare un nome all’amico, ma il nome scelto è irrilevante
-
-
-
Attendi l’aggiornamento del sito
-
-
Se la pagina non si aggiorna da sola, attendi qualche minuto prima di ricaricarla manualmente una singola volta
-
-
-
Quando il sito avrà elaborato le tue informazioni, avanzerà automaticamente a Step 2: Bruteforce
-
Attendi il termine del processo
-
-
Di solito è veloce (1-5 minuti)
-
Durante questo processo, il bot che hai aggiunto potrebbe non apparire sul tuo 3DS. Finché il sito web si aggiorna, non sarà un problema
Al termine del processo, scarica il tuo file movable.sed dal sito
-
-
Mantieni questo file in quanto ti servirà nella prossima pagina
-
-
-
Spegni la tua console
-
-
-
-
-
Passo successivo: BannerBomb3
-
-
Una volta ottenuta la chiave di crittografia della tua console (movable.sed), puoi usarla in combinazione con BannerBomb3, che utilizza il tuo file movable.sed per sfruttare le falle nell’applicazione Impostazioni della console.
-
-
-Multiple cartelle dal nome lungo nella cartella Nintendo 3DS
-
-
-
-
Questo si verifica quando si utilizza la scheda SD in più console 3DS ed accade per prevenire l’unione involontaria di dati non validi su console diverse. Per capire quale cartella dal nome lungo sia quella corretta per il tuo 3DS, segui queste istruzioni:
-
-
-
Rinomina la cartella Nintendo 3DS in BACKUP_Nintendo 3DS
-
Reinserisci la scheda SD nella tua console
-
Accendi la tua console
-
Attendi che la console generi i dati nella scheda SD
-
-
Le tue applicazioni saranno scomparse. È normale e verrà risolto a breve
-
-
-
Spegni la tua console
-
Inserisci la scheda SD nel tuo computer
-
Entra nella cartella Nintendo 3DS della tua scheda SD
-
Copia la stringa di 32 caratteri del nome della cartella qui presente
-
Rinomina la cartella BACKUP_Nintendo 3DS in Nintendo 3DS
-
-
-
-
-Bruteforce Movable salta al passo 4
-
-
Il sito web ha già estratto il tuo file movable.sed usando la combinazione del tuo codice amico e l’ID0. Puoi già usare il file movable.sed che ti viene fornito.
-
-
-
-Important! You have been locked out of the automated part1 dumper system...
-
-
Il tuo codice amico non può più usare il bot perché il tuo 3DS non ha accettato correttamente la sua amicizia. Assicurati che il tuo 3DS sia connesso correttamente a Internet, quindi entra nel canale Discord di Nintendo Homebrew e chiedi di venire sbloccato.
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
Il sito ha stabilito che il tuo file movable.sed non può essere decriptato. Assicurati di aver dato l’ID0 corretto al sito web. Se il tuo ID0 è corretto, allora non potrai utilizzare Seedminer e dovrai utilizzare un metodo alternativo.
Questo si verifica quando utilizzi più schede SD con lo stesso 3DS e poi ne unisci insieme i contenuti. Entrambi sono “validi”, ma il 3DS può leggerne solo uno alla volta.
-
-
Dovrai determinare quale cartella contiene i tuoi dati. Prima di tutto, esegui il backup di tutte le cartelle, nel caso qualcosa vada storto:
-
-
-
-
Ora, elimina tutte le cartelle tranne una dalla tua scheda SD. Generalmente, dovresti eliminare le cartelle più piccole, in quanto quella con tutti i tuoi dati probabilmente peserà di più. Puoi verificare quale cartella occupa più spazio selezionandola col tasto destro e poi cliccando “Proprietà”:
-
-
-
-
-
-
Ora la tua scheda SD dovrebbe assomigliare a questa:
-
-
-
-
Ora, metti la tua scheda SD nel tuo 3DS e accendilo. Se i tuoi dati sono ancora lì, hai eliminato la cartella giusta e ora hai determinato il tuo ID1 corretto. Se invece è scomparso tutto, torna nella cartella di backup che hai fatto in precedenza e prova un’altra cartella.
-
-
-
-
-Il menu Gestione Nintendo DSiWare crasha senza visualizzare il menu BB3 multihax
-
Assicurati che il file F00D43D5.bin sia l’unico file presente in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. In tal caso, ricrealo con Bannerbomb3 Injector.
-
-
Inoltre, assicurati che il file bb3.bin sia nella directory principale dela tua scheda SD. Se manca, scarica l’ultima versione di Bannerbomb3 (download diretto), e copia il file bb3.bin dall’arcivhio .zip di Release nella directory principale della tua scheda SD.
-
-
Se nessuna di queste soluzioni dovesse risolvere il problema, allora un custom firmware potrebbe essere già stato disinstallato da questa console in modo tale da rendere questo metodo impossibile. In tal caso, puoi ricevere assistenza chiedendo, in inglese, nel canale Discord di Nintendo Homebrew.
-
-
-
-Il menu Gestione Nintendo DSiWare visualizza "Non è stato trovato alcun software".
-
-
Manca il file F00D43D5.bin da Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. Assicurati che Nintendo DSiWare sia scritto correttamente e con gli spazi al posto giusto. Lettere maiuscole o minuscole non fanno differenza.
-
-
-
-Il menu Gestione Nintendo DSiWare mostra un punto di domanda
-
-
Potrebbe esserci un problema con il tuo file F00D43D5.bin (potrebbe essere corrotto o per un diverso 3DS). Ri-crea il tuo file F00D43D5.bin con Bannerbomb3 Injector, assicurandoti di utilizzare il file movable.sed della tua console.
-
-
-
Installazione di boot9strap (Fredtool-Inject)
-
-
-Errore nella pagina di DSiHaxInjector
-
-
Assicurati che il file movable.sed e il backup DSiWare provengano dalla stessa console. La mancata corrispondenza comporterà un errore.
-
-
-
-"Haxxxxxxxxx!" non appare
-
-
C’è un problema con il tuo file 42383821.bin (è errato, mancante, mal posizionato o corrotto). Ri-crea i tuoi file con il sito web DSIHaxInjector_new e assicurati di inserire il file 42383821.bin file di output.zip -> hax in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare.
-
-
-
-Il DSiWare si avvia normalmente
-
-
Haxxxxxxxxx! non è stato copiato dalla tua scheda SD nella memoria di sistema.
-
-
-
-La scheda SD è grigia in Flipnote
-
-
Flipnote può richiedere molto tempo per indicizzare la tua scheda SD se ne hai una di grandi dimensioni. Aspetta qualche minuto.
-
-
-
-Non appare il simbolo Lenny face nella sezione della scheda SD
-
-
Non hai copiato la cartella private dall’archivio .zip di Frogminer_save nella directory principale della tua scheda SD.
-
-
-
-Flipnote si blocca
-
-
Potresti aver toccato accidentalmente il touch screen nel Flipnote modificato. Ri-entra in Impostazioni di collegamento DS e riprova, assicurandoti di non toccare accidentalmente il touch screen.
-
-
-
-Schermata verde dopo aver incollato
-
-
Il file boot.nds è mancante o mal posizionato. Scarica l’ultima versione di b9stool e posizionala nella directory principale della tua scheda SD, sostituendo quella preesistente.
-
-
-
-Schermata bianca dopo aver incollato
-
C’è un problema con il tuo file boot.nds. Ri-scarica l’ultima versione di b9stool e posizionala nella directory principale della tua scheda SD, sostituendo quella preesistente.
-
-
-
-Impossibile aprire il menu di configurazione di Luma3DS dopo aver eseguito B9STool
-
-
-
-
-"Si è verificato un errore. Tieni premuto il pulsante POWER per spegnere la console..." (schermo nero con testo)
-
-
I tuoi file 00000001.sav e/o otherapp.bin potrebbero essere mal posizionati. Assicurati che il file 00000001.sav sia in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data e che il file otherapp.bin sia nella directory principale della tua scheda SD.
-
-
Se i tuoi file sono nelle posizioni corrette, ricrea il salvataggio usando PicHaxx Save Tool, poi posizionalo in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Assicurati che il file sia chiamato esattamente 00000001.sav e che tu abbia usato il file movable.sed della tua console per crearlo. Scarica nuovamente HBL otherapps, posiziona il file .bin relativo alla tua console nella directory principale della tua scheda SD e rinominalo in otherapp.bin. Non aggiungere l’estensione .bin se non la vedi presente.
-
-
-
-"Si è verificato un errore che ha provocato la chiusura del software..." (messaggio su riquadro bianco)
-
-
C’è un problema con il tuo file otherapp.bin. Scarica HBL otherapps, posiziona il file .bin relativo alla tua console nella directory principale della tua scheda SD e rinominalo in otherapp.bin. Non aggiungere l’estensione .bin se non la vedi presente.
-
-
-
-Il gioco si avvia normalmente
-
-
Il tuo file 00000001.sav modificato potrebbe essere mal posizionato, o potresti aver usato il file movable.sed errato per la sua creazione. Rigenera il tuo file movable.sed da Bruteforce Movable, quindi ricrea il salvataggio usando PicHaxx Save Tool e posiziona il file risultante (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.
-
-
-
-"Si è verificato un errore. Tieni premuto il pulsante POWER per spegnere la console..." (schermo nero con testo)
-
-
Il file arm11code.bin è mancante o mal posizionato. Scarica l’ultima versione di universal-otherapp, posiziona il file otherapp.bin nella directory principale della tua scheda SD e rinominalo in arm11code.bin. Non aggiungere l'estensione .bin` se non la vedi presente.
-
-
-
-"Si è verificato un errore che ha provocato la chiusura del software..." (messaggio su riquadro bianco)
-
-
Potrebbe esserci un problema con il tuo file arm11code.bin. Scarica l’ultima versione di universal-otherapp, posiziona il file otherapp.bin nella directory principale della tua scheda SD e rinominalo in arm11code.bin. Non aggiungere l'estensione .bin` se non la vedi presente.
-
-
Puoi anche provare a resettare i dati del tuo browser:
-
-
-
Avvia il browser internet, quindi apri le sue impostazioni
-
Scorri verso il basso e seleziona “Reimposta tutti i dati salvati” (può avere nomi simili come “Inizializza i dati di salvataggio” o “Elimina tutti i dati salvati”)
-
Riprova ad eseguire l’exploit
-
-
-
-
-
-Crash aprendo il codice QR di browserhax o l'URL
-
-
Gli exploit basati sul browser (come questo) sono instabili e crashano spesso, ma seguendo i seguenti passaggi, i problemi potrebbero venire risolti.
-
-
-
Avvia il browser internet, quindi apri le sue impostazioni
-
Scorri verso il basso e seleziona “Reimposta tutti i dati salvati” (può avere nomi simili come “Inizializza i dati di salvataggio” o “Elimina tutti i dati salvati”)
-
Riprova ad eseguire l’exploit
-
-
-
-
-Richiesta di aggiornamento di sistema all'apertura del browser
-
-
Il proxy SSLoth è stato configurato in modo errato. Ripeti la sezione SSLoth della pagina.
-
-
-
-Errore 032-0420 all'apertura del browser
-
-
Segui in ordine questi passaggi:
-
-
-
Avvia le Impostazioni di sistema sulla tua console
-
Entra in Impostazioni Internet -> Impostazioni di collegamento
-
Clicca sulla tua connessione wifi e naviga su Modifica -> Pagina Successiva (la freccia a destra) -> Impostazioni proxy
-
Imposta “Impostazioni proxy” su “No”
-
Fai clic su OK, quindi su Salva
-
Quando richiesto, clicca su “Test” per eseguire il test di connessione
-
-
Il test dovrebbe andare a buon fine
-
-
-
Clicca “OK” per continuare
-
Premi “Indietro” due volte, poi “Chiudi” per tornare al menu HOME
-
Apri il Browser Internet una volta sola
-
Se ti viene richiesto di fare un aggiornamento di sistema, premi OK
-
Potrebbe esserci un problema con il tuo file arm11code.bin. Riscarica l’ultima versione di universal-otherapp, posizionala nella directory principale della tua scheda SD e rinominalo in arm11code.bin. Non aggiungere l'estensione .bin` se non la vedi presente.
-
-
-
-"PrepareArm9ForTwl returned error c8804631!"
-
-
Effettua il backup dei tuoi dati e riformatta la tua scheda SD come FAT32 con lo strumento consigliato a seconda del sistema operativo (Windows, macOS, Linux). MiniTool Partition Wizard e lo strumento di formattazione HP (HPUSBDisk) sono noti per causare problemi con schede SD 3DS.
-
-
Se il problema non si risolve, prova ad usare un’altra scheda SD.
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-"Si è verificato un errore. Salva i dati di qualunque applicazione attualmente in uso, quindi riavvia la console."
-
-
La data non è corretta. Per correggerla, segui questi passaggi:
-
-
-
Seleziona Impostazioni della console nel menu HOME, poi tocca Apri.
-
Tocca Impostazioni generali.
-
Tocca Data e ora.
-
Inserisci la data odierna.
-
Tocca i pulsanti su/giù per impostare il giorno, il mese e l’anno corretti.
-
Premi OK per confermare.
-
-
-
Se il problema persiste:
-
-
-
Assicurati che i file arm11code.bin, browserhax_hblauncher_ropbin_payload.bin e boot.3dsx siano nella directory principale della scheda SD (non all’interno di una cartella)
-
Assicurati di aver selezionato il payload corretto per la tua regione E la versione di sistema
-
Assicurati che le impostazioni “Area di residenza” siano così
-
Prova a reimpostare i dati del browser:
-
-
Avvia il browser internet, quindi apri le sue impostazioni
-
Scorri verso il basso e seleziona “Reimposta tutti i dati salvati” (può avere nomi simili come “Inizializza i dati di salvataggio” o “Elimina tutti i dati salvati”)
-
Riprova ad eseguire l’exploit
-
-
-
Prova a cambiare la lingua di sistema in una lingua diversa da quella corrente
-
-
-
-
-
-"Si è verificato un errore. Tieni premuto il pulsante POWER per spegnere la console..." (schermo nero con testo)
-
-
Il file arm11code.bin è mancante o mal posizionato. Assicurati di copiare i file dell’ultima versione di super-skaterhax per la tua regione e versione della console nella directory principale della tua scheda SD (non all’interno di una cartella).
Se il contenuto della scheda SD è corretto, la scheda SD molto probabilmente non sta venendo letta dalla console. Ri-formattala (Windows, Linux), quindi ricomincia dall’inizio della Sezione I.
+
Se il contenuto della scheda SD è corretto, la scheda SD molto probabilmente non sta venendo letta dalla console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -979,6 +571,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1078,7 +679,7 @@ window.cookieconsent.initialise({
Potrebbe mancarti il file SafeB9S.bin dalla directory principale della tua scheda SD, o il file potrebbe essere danneggiato. Copialo dall’archivio .zip di MSET9, sostituendo qualsiasi file esistente.
-
Altrimenti, la scheda SD potrebbe essere formattata o partizionata in modo errato. Prova a riformattare la tua scheda SD: Windows, Linux(questo cancellerà i dati della tua scheda SD)
+
Altrimenti, la scheda SD potrebbe essere formattata o partizionata in modo errato. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
+
+
+"Si è verificato un errore. Salva i dati di qualunque applicazione attualmente in uso, quindi riavvia la console."
+
+
La data non è corretta. Per correggerla, segui questi passaggi:
+
+
+
Seleziona Impostazioni della console nel menu HOME, poi tocca Apri.
+
Tocca Impostazioni generali.
+
Tocca Data e ora.
+
Inserisci la data odierna.
+
Tocca i pulsanti su/giù per impostare il giorno, il mese e l’anno corretti.
+
Premi OK per confermare.
+
+
+
Se il problema persiste:
+
+
+
Assicurati che i file arm11code.bin, browserhax_hblauncher_ropbin_payload.bin e boot.3dsx siano nella directory principale della scheda SD (non all’interno di una cartella)
+
Assicurati di aver selezionato il payload corretto per la tua regione E la versione di sistema
+
Assicurati che le impostazioni “Area di residenza” siano così
+
Prova a reimpostare i dati del browser:
+
+
Avvia il browser internet, quindi apri le sue impostazioni
+
Scorri verso il basso e seleziona “Reimposta tutti i dati salvati” (può avere nomi simili come “Inizializza i dati di salvataggio” o “Elimina tutti i dati salvati”)
+
Riprova ad eseguire l’exploit
+
+
+
Prova a cambiare la lingua di sistema in una lingua diversa da quella corrente
+
+
+
+
+
+"Si è verificato un errore. Tieni premuto il pulsante POWER per spegnere la console..." (schermo nero con testo)
+
+
Il file arm11code.bin è mancante o mal posizionato. Assicurati di copiare i file dell’ultima versione di super-skaterhax per la tua regione e versione della console nella directory principale della tua scheda SD (non all’interno di una cartella).
+
+
+
+"Si è verificato un errore. Tieni premuto il pulsante POWER per spegnere la console..." (schermo nero con testo)
+
+
Il file arm11code.bin è mancante o mal posizionato. Scarica l’ultima versione di universal-otherapp, posiziona il file otherapp.bin nella directory principale della tua scheda SD e rinominalo in arm11code.bin. Non aggiungere l'estensione .bin` se non la vedi presente.
+
+
+
+"Si è verificato un errore che ha provocato la chiusura del software..." (messaggio su riquadro bianco)
+
+
Potrebbe esserci un problema con il tuo file arm11code.bin. Scarica l’ultima versione di universal-otherapp, posiziona il file otherapp.bin nella directory principale della tua scheda SD e rinominalo in arm11code.bin. Non aggiungere l'estensione .bin` se non la vedi presente.
+
+
Puoi anche provare a resettare i dati del tuo browser:
+
+
+
Avvia il browser internet, quindi apri le sue impostazioni
+
Scorri verso il basso e seleziona “Reimposta tutti i dati salvati” (può avere nomi simili come “Inizializza i dati di salvataggio” o “Elimina tutti i dati salvati”)
+
Riprova ad eseguire l’exploit
+
+
+
+
+
+Crash aprendo il codice QR di browserhax o l'URL
+
+
Gli exploit basati sul browser (come questo) sono instabili e crashano spesso, ma seguendo i seguenti passaggi, i problemi potrebbero venire risolti.
+
+
+
Avvia il browser internet, quindi apri le sue impostazioni
+
Scorri verso il basso e seleziona “Reimposta tutti i dati salvati” (può avere nomi simili come “Inizializza i dati di salvataggio” o “Elimina tutti i dati salvati”)
+
Riprova ad eseguire l’exploit
+
+
+
+
+Richiesta di aggiornamento di sistema all'apertura del browser
+
+
Il proxy SSLoth è stato configurato in modo errato. Ripeti la sezione SSLoth della pagina.
+
+
+
+Errore 032-0420 all'apertura del browser
+
+
Segui in ordine questi passaggi:
+
+
+
Avvia le Impostazioni di sistema sulla tua console
+
Entra in Impostazioni Internet -> Impostazioni di collegamento
+
Clicca sulla tua connessione wifi e naviga su Modifica -> Pagina Successiva (la freccia a destra) -> Impostazioni proxy
+
Imposta “Impostazioni proxy” su “No”
+
Fai clic su OK, quindi su Salva
+
Quando richiesto, clicca su “Test” per eseguire il test di connessione
+
+
Il test dovrebbe andare a buon fine
+
+
+
Clicca “OK” per continuare
+
Premi “Indietro” due volte, poi “Chiudi” per tornare al menu HOME
+
Apri il Browser Internet una volta sola
+
Se ti viene richiesto di fare un aggiornamento di sistema, premi OK
+
Potrebbe esserci un problema con il tuo file arm11code.bin. Riscarica l’ultima versione di universal-otherapp, posizionala nella directory principale della tua scheda SD e rinominalo in arm11code.bin. Non aggiungere l'estensione .bin` se non la vedi presente.
+
+
+
+"PrepareArm9ForTwl returned error c8804631!"
+
+
Effettua il backup dei tuoi dati e riformatta la tua scheda SD come FAT32 con lo strumento consigliato a seconda del sistema operativo (Windows, macOS, Linux). MiniTool Partition Wizard e lo strumento di formattazione HP (HPUSBDisk) sono noti per causare problemi con schede SD 3DS.
+
+
Se il problema non si risolve, prova ad usare un’altra scheda SD.
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
Lettura necessaria
-
-
Per utilizzare l’exploit Seedminer, è necessario aggiornare la console all’ultima versione di sistema.
-
-
Cosa serve
-
-
-
Una connessione internet sulla tua console
-
-
-
Sezione I - Aggiornare il Sistema
-
-
-
Aggiorna la console andando su Impostazioni della console, poi “Impostazioni generali”, infine scorri a destra e seleziona “Aggiornamento”
-
-
Potrebbe apparire il messaggio “Nella console è già presente il software di sistema più recente”. È normale se hai già installato l’ultima versione; prosegui con la sezione successiva
-
Se ottieni un errore, imposta sia i DNS sia il Proxy su “Auto”
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
Lettura necessaria
-
-
Per utilizzare l’exploit super-skaterhax, è necessario aggiornare la console all’ultima versione di sistema.
-
-
Cosa serve
-
-
-
Una connessione internet sulla tua console
-
-
-
Sezione I - Aggiornare il Sistema
-
-
-
Aggiorna la console andando su Impostazioni della console, poi “Impostazioni generali”, infine scorri a destra e seleziona “Aggiornamento”
-
-
Potrebbe apparire il messaggio “Nella console è già presente il software di sistema più recente”. È normale se hai già installato l’ultima versione; prosegui con la sezione successiva
-
Se ottieni un errore, imposta sia i DNS sia il Proxy su “Auto”
Se hai gradito questa guida, accettiamo Donazioni.
-
-
-
-
-
-
Lettura necessaria
-
-
Per utilizzare l’exploit MSET9, è necessario aggiornare la console all’ultima versione di sistema.
-
-
Cosa serve
-
-
-
Una connessione internet sulla tua console
-
-
-
Sezione I - Aggiornare il Sistema
-
-
-
Aggiorna la console andando su Impostazioni della console, poi “Impostazioni generali”, infine scorri a destra e seleziona “Aggiornamento”
-
-
Potrebbe apparire il messaggio “Nella console è già presente il software di sistema più recente”. È normale se hai già installato l’ultima versione; prosegui con la sezione successiva
-
Se ottieni un errore, imposta sia i DNS sia il Proxy su “Auto”
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
-
-
설치 된 e숍 타이틀
-
-
Nintendo e숍에서 더 이상 구매할 수 없기 때문에 더 이상 새 타이틀들을 구매할 수 없습니다. 그러나 구매 기능이 중단되기 전에 구매했거나 다운로드한 타이틀은 다시 다운로드할 수 있습니다.
-
-
다음 타이틀 중 하나를 Seedminer와 함께 사용하여 커스텀 펌웨어를 설치할 수 있습니다:
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
-
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요. The methods on earlier firmwares are easier and more stable.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
-
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요. The methods on earlier firmwares are easier and more stable.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
boot9strap을 설치하려면 우선 각 콘솔의 고유 암호화 키를 알아내야 합니다. 이를 위해, 이 가이드에서는 Seedminer을 사용해 그 암호화 키 (movable.sed)를 계산해 낼 것입니다.
-
-
Once we have movable.sed, we can edit the SD card data of the game Mario Kart 7 to install menuhax67, which will allow us to get Homebrew Launcher access.
-
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-
See here for information about Kartminer7, here for information about menuhax67, and here for information about nimdsphax.
-
-
-
-
준비물
-
-
-
A physical or digital copy of Mario Kart 7 updated to the latest version (v1.2)
-
-
You can update Mario Kart 7 from eShop or by following the update prompt when you launch the game
-
-
-
A computer running Windows, macOS, or Linux
-
Seedminer에서 받은 movable.sed 파일
-
The latest release of Kartminer7 (the release marked WINDOWS if you have a Windows computer, or the release marked LINUX-macOS if you have a macOS or Linux-based computer)
In this section, you will have the 3DS generate some data in Mario Kart 7 that will be used to install the exploit in a later section.
-
-
-
SD 카드를 콘솔에 다시 삽입해 주세요
-
마리오 카트 7을 실행해 주세요
-
하단 화면의 “마리오 카트 채널” 버튼을 터치해 주세요
-
If you are prompted to, hit “Next” and “OK” to all of the prompts that you see
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press the (Home) button to suspend Mario Kart 7
-
Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
-
콘솔의 전원을 꺼 주세요
-
-
-
Section II - SD Card Prep Work
-
-
-
SD 카드를 컴퓨터에 삽입해 주세요
-
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
-
-
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
-
-
-
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
-
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
-
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
-
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
-
-
이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 Nintendo 3DS 폴더와 다른 폴더입니다
-
-
-
nimdsphax .zip안에 있는 nimdsphax 폴더를 SD 카드의 /3ds/ 폴더에 복사해 주세요
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
menuhax ‘.zip’ 파일에서, 모델과 국적에 맞는 폴더를 찾아 들어가, Launcher.dat 파일을 복사해 SD 카드의 최상단에 복사해 주세요
-
Keep your SD card inserted in your computer, as it is still required in the next section
-
-
-
-
-
-
-
Section III - Installing Kartminer7
-
-
-
Extract the Release_BETA_mk7 .zip to somewhere on your computer (i.e. your desktop)
-
Copy your movable.sed file to the resources folder of the Release_BETA_mk7 folder
-
-
Ensure that the file is named exactly movable.sed
-
-
-
Open the backup folder inside of the Release_BETA_mk7 folder
-
Double-click on the BACKUP file corresponding to your console’s region (e.g. backup_USA if you have a USA copy of Mario Kart 7)
-
-
If you are unsure of your console region, you can check System Settings. U = USA; E = EUR, J = JPN
-
If you get a message from Windows Defender, click “More info”, “Run anyway”, then press any key to continue
-
If the backup was successful, you should see a new folder appear
-
If you wish to restore this data at a later date (after finishing this guide), insert your SD card and double-click on the RESTORE file corresponding to your console’s region
-
-
-
Go back to the Release_BETA_mk7 folder, then double-click on the file corresponding to your console’s region (e.g. USA if you have a USA copy of Mario Kart 7)
-
SD 카드를 콘솔에 다시 삽입해 주세요
-
-
-
섹션 IV - Kartminer7
-
-
-
콘솔의 전원을 켜 주세요
-
마리오 카트 7을 실행해 주세요
-
하단 화면의 “마리오 카트 채널” 버튼을 터치해 주세요
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press (A) over and over again
-
-
You should eventually see the “Start Race?” prompt, then the colours on the bottom screen should change from red, to blue, to white
-
If you see the red/blue/white screens but the 3DS crashes, just reboot and try again
-
If you don’t see ANY colours, change your system language (if possible), then try the exploit again
-
-
-
If the exploit was successful, the 3DS will have booted into the 3DS ROP xPloit Injector
-
-
-
섹션 V - menuhax67 설치
-
-
-
(Y) + (십자 패드 Down)을 눌러 menuhax67을 설치해 주세요
-
-
콘솔의 전윈이 자동으로 꺼질 겁니다
-
-
-
콘솔의 전원을 켜 주세요
-
아래 화면 왼쪽에 있는 HOME 메뉴 설정 아이콘을 눌러 주세요 ()
-
-
콘솔이 프리징에 걸렸다가 크래시되는 경우, Launcher.dat 파일이 SD 카드의 루트에 있는지 확인하세요
-
-
-
익스플로잇이 성공적이었다면 Homebrew Launcher로 부팅되었을 것입니다
-
홈브류 목록에서 nimdsphax를 실행해 주세요
-
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
-
-
빨간색 화면에서 콘솔이 멈추는 경우, 전원 버튼을 길게 눌러 전원을 끈 다음 다시 전원을 켜고 HOME 메뉴의 설정 아이콘을 눌러 menuhax를 다시 실행해 보세요
-
-
-
-
-
섹션 VI - boot9strap 설치
-
-
이 섹션에서는, 커스텀 펌웨어를 설치할 것입니다.
-
-
-
메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요
-
-
아래 화면의 단계가 붉은 텍스트로 표시되고 키 콤보 입력을 요구하지 않는다면, 이 문제 해결 가이드를 참고해 주세요
-
-
-
작업이 완료되면, (A) 를 눌려 콘솔을 재부팅해 주세요
-
콘솔은 Luma3DS 구성 메뉴로 부팅되었을 겁니다
-
-
Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다
-
일단 이 가이드에서는 모든 설정을 기본으로 남겨 두세요 (켜기 또는 끄기를 누르지 마세요)
-
만약 콘솔이 부팅시에 꺼진다면 Luma3DS .zip 파일 안에 압축 되있는 boot.firm을 SD 카드의 루트로 복사 했는지 확인해 주세요
-
-
-
(Start)를 눌러 저장하고 콘솔을 다시 시작해 주세요
-
-
-
섹션 VII - menuhax67 제거
-
-
이 섹션에서, 홈브류 런처를 사용해 menuhax67을 제거합니다. 이 작업을 통해 HOME 메뉴 설정이 정상적으로 복구될 것입니다.
-
-
-
다운로드 플레이 앱을 실행해 주세요 ()
-
Nintendo 3DS 하고 Nintendo DS 버튼이 표시 될 때까지 기다려 주세요
-
(L 어깨) + (십자 Down) + (Select) 을 동시에 눌러서 Rosalina 메뉴를 실행해 주세요
-
“Miscellaneous options”을 선택해 주세요
-
“Switch the hb. title to the current app.”를 선택해 주세요
-
(B)를 눌러 진행해 주세요
-
(B)를 눌러 Rosalina 메뉴로 돌아가 주세요
-
(B)를 눌러 Rosalina 메뉴를 나와 주세요
-
(Home) 키를 눌러 다운로드 플레이를 종료해 주세요
-
아래 화면에서 “종료” 버튼을 눌러 다운로드 플레이 앱을 닫아주세요
-
다운로드 플레이 앱을 다시 실행해 주세요
-
성공하면 Homebrew Launcher가 실행될 것입니다
-
-
만약 콘솔이 Nintendo 3DS 화면에 정지되면, SD 카드 루트에 boot.3dsx이 존재하지 않습니다
-
-
-
홈브류 목록에서 menuhax67_installer를 실행해 주세요
-
REMOVE menuhax67를 선택해 주세요
-
When you see “done.”, press (A), then press (A) on “EXIT to menu”
-
-
-
At this point, you can re-enable wireless communications.
-
-
이제 콘솔은 Luma3DS를 기본으로 부팅 됩니다.
-
-
Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 콘솔이 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다.
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
-
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
-
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
-
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
-
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
-
-
이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 Nintendo 3DS 폴더와 다른 폴더입니다
-
-
-
nimdsphax .zip안에 있는 nimdsphax 폴더를 SD 카드의 /3ds/ 폴더에 복사해 주세요
-
SD 카드를 콘솔에 다시 삽입해 주세요
-
-
-
-
-
-
-
-
-
섹션 II - menuhax67
-
-
In this section you will use the menuhax67 exploit installed earlier to launch nimdsphax, which will load SafeB9SInstaller.
-
-
-
콘솔의 전원을 켜 주세요
-
아래 화면 왼쪽에 있는 HOME 메뉴 설정 아이콘을 눌러 주세요 ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
익스플로잇이 성공적이었다면 Homebrew Launcher로 부팅되었을 것입니다
-
홈브류 목록에서 nimdsphax를 실행해 주세요
-
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
-
-
만약 콘솔에 적색 화면이 표시되면, 전원 버튼을 길게 눌러 콘솔의 전원을 끄고, 이 섹션을 다시 시도해 주세요
-
-
-
-
-
섹션 III - boot9strap 설치하기
-
-
이 섹션에서는, 커스텀 펌웨어를 설치할 것입니다.
-
-
-
메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요
-
-
아래 화면의 단계가 붉은 텍스트로 표시되고 키 콤보 입력을 요구하지 않는다면, 이 문제 해결 가이드를 참고해 주세요
-
-
-
작업이 완료되면, (A) 를 눌려 콘솔을 재부팅해 주세요
-
콘솔은 Luma3DS 구성 메뉴로 부팅되었을 겁니다
-
-
Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다
-
일단 이 가이드에서는 모든 설정을 기본으로 남겨 두세요 (켜기 또는 끄기를 누르지 마세요)
-
만약 콘솔이 부팅시에 꺼진다면 Luma3DS .zip 파일 안에 압축 되있는 boot.firm을 SD 카드의 루트로 복사 했는지 확인해 주세요
-
-
-
(Start)를 눌러 저장하고 콘솔을 다시 시작해 주세요
-
-
-
섹션 IV - menuhax67 제거
-
-
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
This method requires a computer running Windows, Linux, or macOS. Phones or tablets are NOT currently supported. If you do not have access to a computer, you will need to use an alternate exploit.
+
This method requires a computer running Windows, Linux, or macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
이 방법은 일본판 SmileBASIC과 호환되지 않습니다. The guide for that version can be found here.
-
-
-기술적 상세 정보 (선택 사항)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
이 방법은 USA(북미) 및 EUR(유럽) 지역의 SmileBASIC과 호환되지 않습니다. 해당되는 두 지역 버전은 여기를 참조해주세요.
-
-
-기술적 상세 정보 (선택 사항)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
Make sure SmileBASIC is updated to the latest version
-
콘솔의 전원을 꺼 주세요
-
SD 카드를 컴퓨터에 삽입해 주세요
-
Luma3DS .zip안에 있는 boot.firm과 boot.3dsx를 SD 카드의 루트에 복사해 주세요
-
-
SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
-
-
-
SD 카드이 루트에 boot9strap 라는 이름으로 새 폴더를 생성해 주세요
-
SD 카드에 있는 /boot9strap/ 폴더에 boot9strap .zip 파일 안에 압축되있는 boot9strap.firm과 boot9strap.firm.sha을 복사해 주세요
-
SafeB9SInstaller .zip의 SafeB9SInstaller.bin을 SD 카드의 루트로 복사해 주세요
-
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
.bin 확장자는 보이지 않는 이상 추가하지 말아 주세요
-
-
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
SD 카드의 루트에 3ds 폴더가 없을 경우 폴더를 만들어 주세요
-
-
이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 Nintendo 3DS 폴더와 다른 폴더입니다
-
-
-
nimdsphax .zip안에 있는 nimdsphax 폴더를 SD 카드의 /3ds/ 폴더에 복사해 주세요
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
-
SD 카드를 콘솔에 다시 삽입해 주세요
-
콘솔의 전원을 켜 주세요
-
-
-
-
-
-
-
-
-
섹션 II - smilehax
-
-
-
SmileBASIC을 실행해 주세요
-
-
DO NOT update the game if prompted
-
-
-
“Publish/Download Projects” 를 선택해 주세요
-
Select the “Download (Receive) using Public Key” option
-
“Yes” 버튼을 눌러 주세요
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
START 버튼을 눌러 주세요
-
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
-
콘솔은 Homebrew Launcher로 부팅되었을 겁니다
-
홈브류 목록에서 nimdsphax를 실행해 주세요
-
익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
-
-
만약 콘솔에 적색 화면이 표시되면, 전원 버튼을 길게 눌러 콘솔의 전원을 끄고, 이 섹션을 다시 시도해 주세요
-
-
-
-
-
섹션 III - boot9strap 설치하기
-
-
이 섹션에서는, 커스텀 펌웨어를 설치할 것입니다.
-
-
-
메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요
-
-
아래 화면의 단계가 붉은 텍스트로 표시되고 키 콤보 입력을 요구하지 않는다면, 이 문제 해결 가이드를 참고해 주세요
-
-
-
작업이 완료되면, (A) 를 눌려 콘솔을 재부팅해 주세요
-
콘솔은 Luma3DS 구성 메뉴로 부팅되었을 겁니다
-
-
Luma3DS 구성 메뉴는 Luma3DS 커스텀 펌웨어의 설정들 입니다. 이 설정들은 디버깅 또는 맞춤화의 유용합니다
-
일단 이 가이드에서는 모든 설정을 기본으로 남겨 두세요 (켜기 또는 끄기를 누르지 마세요)
-
만약 콘솔이 부팅시에 꺼진다면 Luma3DS .zip 파일 안에 압축 되있는 boot.firm을 SD 카드의 루트로 복사 했는지 확인해 주세요
-
-
-
(Start)를 눌러 저장하고 콘솔을 다시 시작해 주세요
-
-
-
이제 콘솔은 Luma3DS를 기본으로 부팅 됩니다.
-
-
Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 콘솔이 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다.
만약 콘솔이 Luma 10.2.1 이상일 경우, 업데이트해도 100% 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 CFW 복구 / 업데이트를 해야 합니다.
-
만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 최신 버전으로 업데이트 하지 마세요. The methods on earlier firmwares are easier and more stable.
-
만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
만약 이번이 3DS를 처음으로 모딩하는 것 (혹은 모딩에 익숙하지 않다면) 이라면, 계속 정독하세요! 반면, 사전에 모딩을 해봤거나 할 줄 안다면, 시작하기 페이지로 계속하세요.
사이트가 정보를 수집한 후, 자동으로 Step 2: Bruteforce로 진행할 것 입니다
-
나머지 과정이 완료될 때까지 기다려 주세요
-
-
보통 1~5분 안에 끝납니다
-
이 과정을 하는 동안 봇이 콘솔에 표시가 안 될수도 있습니다. 웹사이트가 계속 업데이트 하는 경우, 이것은 문제가 아닙니다
-
만약 30분이 지나서도 완료가 안된다면, Nintendo Homebrew Discord 서버에서 영어로 물어보세요. “Bruteforce Movable is not working. Could someone help me?”정도 질문이 적당할 것 입니다
- +만약 “We were unable to successfully complete your bruteforce request. :`(“가 표시된다면, 이 문제 해결 가이드를 참고해 주세요.
-
-
-
과정이 끝나면, movable.sed 파일을 다운로드 해 주세요
-
-
이 파일은 나중에도 사용되니 일단 보관해 두세요
-
-
-
콘솔의 전원을 꺼 주세요
-
-
-
-
-
다음 단계
-
-
3DS에 설치한 어플리케이션을 바탕으로 방식을 선택합니다. 어떤 방식을 선택하더라도 최종 결과는 동일합니다.
-
-
마리오 카트 7
-
-
이 방법은 게임 카드 또는 디지털 버전의 마리오 카트 7 게임을 사용합니다. movable.sed 파일을 사용하여, 마리오 카트 7의 SD 카드 데이터를 개조하여 Homebrew Launcher 접근 권한을 획득하여 이후의 취약점 공략에 사용할 수 있습니다.
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. 위 사항에 대해서 잘 모르거나 필요한 하드웨어가 없을 경우, Nintendo Homebrew Discord 서버 에 들어간 다음, “#mii-mining-assistance” 채널에 들어가 다음 사항을 따라주세요
-
-
Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
-
Your console’s ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see this troubleshooting section if you have multiple)
-
Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
Your console’s year of manufacturing; if you don’t know, don’t say it - it’s not super important
-
-
-
-
-기술적 상세 정보 (선택 사항)
-
-
boot9strap을 설치하려면 우선 각 콘솔의 고유 암호화 키를 알아내야 합니다. 이를 위해, 이 가이드에서는 Seedminer을 사용해 그 암호화 키 (movable.sed)를 계산해 낼 것입니다.
-
-
Because we do not have access to the Friends List, we are deriving the first part of movable.sed using a Mii QR code instead of by performing a two-way friend exchange.
-
-
Seedminer이 정확히 어떻게 작동하는지 배우고 싶다면 이 프레젠테이션을 참고할 수 있습니다.
-
-
-
-
진행 방법
-
-
If you are on Linux or macOS, replace py -3 with python3 in all commands.
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
-
-
-
-
-
섹션 I - 준비 작업
-
-
In this section, you will set up Seedminer and obtain your console’s files that are needed for mining.
-
-
-
Extract the contents of the Seedminer .zip and move the folder with your operating system’s name to anywhere on your computer
-
-
Keep this location handy, as this Seedminer folder will be where multiple other files are placed
-
-
-
In the Seedminer folder, hold SHIFT and right-click anywhere in the folder’s empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
-
In the command line window, type py -3 -m pip install pycryptodomex, hit ENTER, and allow it to install
-
-
If this command fails with the error No module named pip, you must manually install pip. The methods to do this can be found on this page.
-
-
-
Power on your console while the SD card is inserted
-
Open the Mii Maker app
-
“QR Code/이미지 파일” 버튼을 눌러 주세요
-
“Mii QR Code를 만들기”를 눌러 주세요
-
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
Click on “Import from…”, then select “QR Code” and upload the Mii QR code from earlier
-
Click on “Export to…”, then select “encrypted (.bin)”
-
-
This will download a file named input.bin
-
-
-
Copy this input.bin to the Seedminer folder
-
Open the terminal/PowerShell/Command Prompt window from earlier
-
Inside this window, enter the command py -3 seedminer_launcher3.py id0 <id0>
-
-
Replace <id0> with the ID0 you copied into a document
-
Do not include the angle brackets
-
ID0을 수동으로 입력하지 마세요. 실수하기 아주 쉽습니다. 그 ID0가 확실하게 정확히 들어갔다고 확신할수있도록 그 ID0를 그대로 복사 붙여넣기 해 주세요
-
-
-
Once it completes, enter the command py -3 seedminer_launcher3.py mii <model> <year>
-
-
Replace <model> with the model of your console (new or old) - if you aren’t sure, only models with the ZL/ZR buttons and C-Stick are “new”
-
Replace <year> with the year the 3DS was made (On Old 3DS consoles, the years on the backplate, (M)2010/(C)2011, are always the same and NOT an indicator) - if you aren’t sure, see below
-
Estimate manufacturing years are: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
You can also leave the year empty, which will make it start in the middle
-
The mining process will usually take up to 90 minutes, depending on luck and your GPU’s strength
-
The first stage will likely max out at roughly offset 1500, depending on console model
-
If the second stage (after seeing movable_part2.sed generation success) gets past offset 100, verify that you input the correct ID0. If your ID0 is correct, you cannot use this method and will have to update to the latest version and see if a non-Seedminer method is available for you here
-
If you see the message input.bin is invalid size, remake the input.bin using your QR Code. If it still fails, open a different browser and remake the input.bin there
-
If you see the message LFCS has been left blank, use the opposite console model (e.g. mii old instead of mii new)
-
-
-
When it finishes, a file called movable.sed will appear in the Seedminer folder
사이트가 정보를 수집한 후, 자동으로 Step 2: Bruteforce로 진행할 것 입니다
-
나머지 과정이 완료될 때까지 기다려 주세요
-
-
보통 1~5분 안에 끝납니다
-
이 과정을 하는 동안 봇이 콘솔에 표시가 안 될수도 있습니다. 웹사이트가 계속 업데이트 하는 경우, 이것은 문제가 아닙니다
-
만약 30분이 지나서도 완료가 안된다면, Nintendo Homebrew Discord 서버에서 영어로 물어보세요. “Bruteforce Movable is not working. Could someone help me?”정도 질문이 적당할 것 입니다
- +만약 “We were unable to successfully complete your bruteforce request. :`(“가 표시된다면, 이 문제 해결 가이드를 참고해 주세요.
-
-
-
과정이 끝나면, movable.sed 파일을 다운로드 해 주세요
-
-
이 파일은 나중에도 사용되니 일단 보관해 두세요
-
-
-
콘솔의 전원을 꺼 주세요
-
-
-
-
-
다음 단계: BannerBomb3
-
-
콘솔의 암호화 키 (movable.sed)를 구한 후, 이것을 BannerBomb3와 함깨 사용하여, 시스템 설정 앱에 존재하는 익스플로잇을 사용할 것 입니다.
사이트가 정보를 수집한 후, 자동으로 Step 2: Bruteforce로 진행할 것 입니다
-
나머지 과정이 완료될 때까지 기다려 주세요
-
-
보통 1~5분 안에 끝납니다
-
이 과정을 하는 동안 봇이 콘솔에 표시가 안 될수도 있습니다. 웹사이트가 계속 업데이트 하는 경우, 이것은 문제가 아닙니다
-
만약 30분이 지나서도 완료가 안된다면, Nintendo Homebrew Discord 서버에서 영어로 물어보세요. “Bruteforce Movable is not working. Could someone help me?”정도 질문이 적당할 것 입니다
- +만약 “We were unable to successfully complete your bruteforce request. :`(“가 표시된다면, 이 문제 해결 가이드를 참고해 주세요.
-
-
-
과정이 끝나면, movable.sed 파일을 다운로드 해 주세요
-
-
이 파일은 나중에도 사용되니 일단 보관해 두세요
-
-
-
콘솔의 전원을 꺼 주세요
-
-
-
-
-
다음 단계: BannerBomb3
-
-
콘솔의 암호화 키 (movable.sed)를 구한 후, 이것을 BannerBomb3와 함깨 사용하여, 시스템 설정 앱에 존재하는 익스플로잇을 사용할 것 입니다.
This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
-
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
-
-
-
-
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
-
-
-
-
-
-
Your SD card should now look something like this:
-
-
-
-
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
-
-
-
-
-DSiWare 관리 메뉴가 BB3 multihax 메뉴를 표시하지 않고 깨짐
-
F00D43D5.bin이 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 폴더 내에 있는 유일한 파일이어야 합니다. 만약 그렇다면, BannerBomb3 툴에서 다시 생성해 주세요.
-
-
또한, bb3.bin이 SD 카드의 최상위 디렉토리에 있어야 합니다. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.
-
-
-
-DSiWare 관리 메뉴가 "소프트웨어 데이터에 접근할 수 없습니다."를 표시합니다
-
-
F00D43D5.bin이 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 폴더 내에 없습니다. 폴더 Nintendo DSiWare의 이름에 오타가 있는지 확인해 주세요. 대소문자는 구분하지 않습니다.
-
-
-
-DSiWare 관리 메뉴에서 물음표가 표시됩니다
-
-
F00D43D5.bin 파일에 문제가 있습니다. (잘못된 파일이거나 다른 3DS용 파일) 해당 콘솔의 movable.sed 파일을 이용해, BannerBomb3 툴에서 F00D43D5.bin 파일을 다시 생성해 주세요.
-
-
-
boot9strap 설치 (Fredtool-Inject)
-
-
-DSiHaxInjector 페이지에서 오류가 발생합니다
-
-
movable.sed와 DSiWare 백업 파일이 동일한 콘솔에서 추출한 것인지 확인해 주세요. 서로 다르면 오류가 발생합니다.
-
-
-
-"Haxxxxxxxxx!"가 표시되지 않습니다
-
-
42383821.bin 파일에 문제가 있습니다. (없거나, 잘못 들어갔거나, 혹은 잘못된 파일) DSIHaxInjector_new 웹사이트에서 파일을 다시 만들어 output.zip -> hax에 있는 42383821.bin 파일을 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare에 정확하게 배치해 주세요.
-
-
-
-게임이 정상적으로 실행됩니다
-
-
Haxxxxxxxxx!가 SD 카드에서 시스템 메모리로 복사되지 않았습니다.
-
-
-
-Flipnote에서 SD 카드가 회색으로 표시됩니다
-
-
만약 큰 SD 카드를 사용하신다면, Flipnote가 오래 걸릴 수 있습니다. 몇 분 정도 기다려 주세요.
-
-
-
-SD카드 선택에서 Lenny face가 표시되지 않습니다
-
-
SD 카드 루트에 Frogminer_save .zip 안에 있는 private 폴더를 복사하지 않았습니다.
-
-
-
-Flipnote가 멎었습니다
-
-
수정된 Flipnote에서 실수로 터치 스크린을 건드렸을 수 있습니다. DS 소프트웨어용 설정에 다시 들어가 다시 시도하되, 터치 스크린을 실수로 누르지 않도록 주의해주세요.
-
-
-
-붙여넣기 후 파란 화면이 표시됩니다
-
-
boot.nds 파일이 없거나 잘못 들어갔습니다. 최신 버전의 b9stool을 다시 내려받고 boot.nds 파일을 SD 카드의 최상위 디렉토리에 복사해주세요. 이미 파일이 있으면 덮어씌워 주세요.
-
-
-
-붙여넣기 후 하얀 화면이 표시됩니다
-
boot.nds 파일에 문제가 있습니다. 최신 버전의 b9stool을 다시 내려받고 boot.nds 파일을 SD 카드의 최상위 디렉토리에 복사해주세요. 이미 파일이 있으면 덮어씌워 주세요.
-
-
-
-B9STool을 실행한 후 Luma3DS 설정 메뉴를 실행할 수 없습니다
-
-
-
-
-에러가 발생했습니다. 본체의 전원 버튼을 길게 눌러 전원을 끈 후..." (검은 화면에 텍스트)
-
-
00000001.sav 또는 otherapp.bin 파일이 잘못 들어갔습니다. 00000000.sav가 Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00004000 -> 0017c100 -> data 안에 있고 otherapp.bin`이 SD 카드 루트에 있는지 다시 한 번 확인해 주세요.
-
-
만약 위치가 정확하다면, PicHaxx Save Tool을 이용해 세이브를 다시 생성한 후, Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data 폴더 안에 다시 복사해 주세요. 반드시 파일의 이름이 00000001.sav이고 콘솔의 movable.sed를 이용해야 합니다. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
-
-
-
-피크로스 실행 중 "An exception occurred" 또는 오류 화면이 표시됩니다
-
-
이 콘솔은 이미 커스텀 펌웨어가 설치되어 있습니다. CFW 확인 을 하는 것을 권장합니다.
-
-
-
-"에러가 발생하여 소프트웨어를 종료합니다..." (하얀 메시지 창)
-
-
otherapp.bin 파일에 문제가 있습니다. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
-
-
-
-게임이 정상적으로 실행됩니다
-
-
수정된 00000001.sav 파일이 잘못 들어갔거나, 다른 movable.sed 파일로 생성했습니다. Bruteforce Movable에서 movable.sed를 다시 생성해, PicHaxx Save Tool에서 세이브 파일을 다시 생성, 결과 파일(00000001.sav)을 Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00004000 -> 0017c100 -> data에 복사해 주세요.
-
-
-
-에러가 발생했습니다. 본체의 전원 버튼을 길게 눌러 전원을 끈 후..." (검은 화면에 텍스트)
-
-
arm11code.bin 파일이 없거나 잘못 들어갔습니다. 최신 버전의 universal-otherapp을 내려받아 otherapp.bin 파일을 SD 카드의 최상위 디렉토리에 복사하고, 이름을 arm11code.bin으로 변경해 주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
-
-
-
-"에러가 발생하여 소프트웨어를 종료합니다..." (하얀 메시지 창)
-
-
arm11code.bin에 문제가 있을 수 있습니다. 최신 버전의 universal-otherapp을 내려받아 otherapp.bin 파일을 SD 카드의 최상위 디렉토리에 복사하고, 이름을 arm11code.bin으로 변경해 주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
-
-
You can also try resetting your browser save data:
-
-
-
브라우저를 실행하고 브라우저 설정을 실행해 주세요
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
데이터를 모두 백업하고 시스템별로 권장되는 프로그램을 이용해 SD카드를 FAT32로 다시 포맷해 주세요. (Windows, macOS, Linux) MiniTool Partition Wizard나 HP formatting tool(HPUSBDisk)는 3DS용 SD 카드에 문제를 발생시킨다는 것이 알려져 있습니다.
-
-
만약 해결되지 않는다면, 다른 SD 카드를 이용해 보세요.
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-에러가 발생했습니다. Please save your data in any software currently in use, then restart the system."
-
-
날짜가 잘못 설정되어 있습니다. 날짜를 수정하려면 다음 단계를 따라 주세요:
-
-
-
Select the System Settings icon on the HOME Menu, and tap Open.
-
Tap Other Settings.
-
Tap Date & Time.
-
Tap Today’s date.
-
Tap Up/Down Arrows to set the correct Day, Month and Year.
-
Select OK to confirm.
-
-
-
문제가 지속될 경우:
-
-
-
Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
-
익스플로잇을 다시 시도해 주세요
-
-
-
시스템 언어를 현재 언어가 아닌 다른 언어로 변경해 보세요
-
-
-
-
-
-에러가 발생했습니다. 본체의 전원 버튼을 길게 눌러 전원을 끈 후..." (검은 화면에 텍스트)
-
-
arm11code.bin 파일이 없거나 잘못 들어갔습니다. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
-
-
-
-
-
-
-"GO! GO!" 선택 시 "An exception occurred" 또는 오류 화면이 표시됩니다
-
-
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -979,6 +571,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1078,7 +679,7 @@ window.cookieconsent.initialise({
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
-
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
+
익스플로잇을 다시 시도해 주세요
+
+
+
시스템 언어를 현재 언어가 아닌 다른 언어로 변경해 보세요
+
+
+
+
+
+에러가 발생했습니다. 본체의 전원 버튼을 길게 눌러 전원을 끈 후..." (검은 화면에 텍스트)
+
+
arm11code.bin 파일이 없거나 잘못 들어갔습니다. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
+
+
+
+
+
+
+"GO! GO!" 선택 시 "An exception occurred" 또는 오류 화면이 표시됩니다
+
+
+
+
+
+에러가 발생했습니다. 본체의 전원 버튼을 길게 눌러 전원을 끈 후..." (검은 화면에 텍스트)
+
+
arm11code.bin 파일이 없거나 잘못 들어갔습니다. 최신 버전의 universal-otherapp을 내려받아 otherapp.bin 파일을 SD 카드의 최상위 디렉토리에 복사하고, 이름을 arm11code.bin으로 변경해 주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
+
+
+
+"에러가 발생하여 소프트웨어를 종료합니다..." (하얀 메시지 창)
+
+
arm11code.bin에 문제가 있을 수 있습니다. 최신 버전의 universal-otherapp을 내려받아 otherapp.bin 파일을 SD 카드의 최상위 디렉토리에 복사하고, 이름을 arm11code.bin으로 변경해 주세요. .bin 확장자는 보이지 않는 이상 추가하지 말아 주세요.
+
+
You can also try resetting your browser save data:
+
+
+
브라우저를 실행하고 브라우저 설정을 실행해 주세요
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
데이터를 모두 백업하고 시스템별로 권장되는 프로그램을 이용해 SD카드를 FAT32로 다시 포맷해 주세요. (Windows, macOS, Linux) MiniTool Partition Wizard나 HP formatting tool(HPUSBDisk)는 3DS용 SD 카드에 문제를 발생시킨다는 것이 알려져 있습니다.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
-
-
Installed eShop titles
-
-
Because Nintendo eShop no longer allows purchases, it is no longer possible to purchase new titles. However, you can re-download a title if you had purchased or downloaded them before purchases stopped being possible.
-
-
Any one of the following titles can be used in conjunction with Seedminer to install custom firmware:
-
-
Mario Kart 7 (common preinstalled title; a physical cartridge also works)
-
Pokémon Picross (free-to-play; digital only)
-
Steel Diver: Sub Wars (free-to-play; digital only)
This method requires a compatible DS flashcart to be flashed with ntrboot, which works on all 3DS-family consoles regardless of model or region.
-
-
If none of the above options are available to you, this is the cheapest available option. If you don’t already have a compatible cartridge, a preflashed ntrboot-compatible cartridge can be purchased here for roughly $20 USD.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
Verplicht te lezen
-
-
Om DSiWare die op het systeem staat te dumpen naar de SD-kaart, maken we gebruik van een fout in het DSiWare Data Management venster van de Settings applicatie.
-
-
Om dit te bereiken, gebruiken we de encryptiesleutel van je systeem (movable.sed) om een DSiWare back-up te maken die het systeem exploiteert om de DSi Internet Settings applicatie naar de hoofdmap van je SD-kaart te dumpen.
-
-
Zodra je een DSiWare back-up hebt, kan een exploiteerbare DSiWare titel worden geïnjecteerd in DS Download Play, dat gebruikt kan worden om custom firmware te installeren.
-
-
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, choose the other method.
De nieuwste versie van Frogminer_save (Frogminer_save.zip)
-
-
-
Deel I - CFW Controle
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Zet je console uit
-
Houd de (Select) knop ingedrukt
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Zet je console uit
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
-
-
Deel II - Voorbereiding
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Copy boot.nds (B9STool) from the release .zip to the root of your SD card
-
Kopieer de private map van de Frogminer_save .zip naar de hoofdmap van je SD-kaart
-
Houd je SD-kaart in je computer - er zijn meer dingen te doen in de volgende sectie
Voer een alfanumerieke naam in onder het “Username” veld (geen spaties of speciale tekens)
-
Onder het “MovableSed” veld upload je je movable.sed met behulp van de “Browse…” optie
-
Klik op “Build”
-
-
Wacht enkele seconden tot het bouwproces voltooid is
-
-
-
In the Build History section on the left, type the Username into the “Filter Builds” field
-
Klik op het eerste zoekresultaat
-
-
This result should have the latest timestamp
-
-
-
Klik op de “output_(name).zip” link
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
Create a folder named Nintendo DSiWare inside of the <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Open het output_(naam) .zip bestand en navigeer naar China_Taiwan -> output_setup
-
Kopieer alle zes de .bin bestanden naar de Nintendo DSiWare map
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
Launch System Settings on your console
-
Navigeer naar Data Management -> DSiWare -> SD Card -> (page 2)
-
Let op welk nummer op de DSiWare titel op de tweede pagina staat (het zal een getal tussen 1 en 6 zijn)
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
-
Open de output_(naam) .zip bestand en navigeer naar China_Taiwan -> output_hax
-
Kopieer het .bin bestand dat hetzelfde nummer is als het nummer dat op de tweede pagina van het DSiWare Management menu stond naar de Nintendo DSiWare map, en overschrijf wanneer hierom gevraagd wordt
-
Zet je console aan
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Wacht even
-
-
The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the console showing an error message and rebooting
-
Als je het paarse scherm niet hebt gezien, ging er iets mis
-
-
-
Je zou nu het bestand 42383821.bin op de hoofdmap van je SD-kaart moeten hebben
-
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
-
Verwijder alle .bin bestanden in de Nintendo DSiWare map
Voer een alfanumerieke naam in onder het “Username” veld (geen spaties of speciale tekens)
-
-
Misschien wil je het een andere naam geven om het te onderscheiden van BannerBomb3’s output
-
-
-
In het “DSiBin” veld, upload je je 42383821.bin bestand met behulp van de eerste “Browse…” optie
-
Onder het veld “MovableSed”, upload je movable.sed bestand met behulp van de tweede “Browse…” optie
-
Onder ‘InjectionTarget”’ stel de injectie in op DSdownloadplay (GEEN memorypit)
-
Klik op “Build”
-
-
Wacht enkele seconden tot het bouwproces voltooid is
-
-
-
In the Build History section on the left, type the Username into the “Filter Builds” field
-
Klik op het eerste zoekresultaat
-
-
This result should have the latest timestamp
-
-
-
Klik op de “output_(name).zip” link
-
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
-
Kopieer het 484E4441.bin bestand van de hax map van het gedownloade DSiWare archief (output_(naam).zip) naar de Nintendo DSiWare map
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
Launch System Settings on your console
-
Navigeer naar Data Management -> DSiWare
-
Onder het “SD Card” gedeelte selecteer de titel “Haxxxxxxxxx!”
-
Selecteer “Copy” en selecteer dan “OK”
-
-
-
Deel V - Flipnote Exploit
-
-
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
If you would prefer a visual guide to this section, one is available here.
-
-
-
Verlaat Systeeminstellingen
-
Launch Download Play on your console (the orange icon with a 3DS on it)
-
Selecteer “Nintendo DS”
-
Als de exploit succesvol was, zal je 3DS de JPN versie van Flipnote Studio hebben geladen
-
Complete the initial setup process for the launched game until you reach the main menu
-
-
Select the left option whenever prompted during the setup process
Upload your movable.sed using the “Choose File” option
-
Click “Build and Download”
-
-
This will download an exploit DSiWare called F00D43D5.bin, which will be contained in a zip archive (BannerBomb3.zip)
-
-
-
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
This file does not need to be opened or extracted
-
-
-
-
Copy Launcher.dat from the folder for your model and region inside the Release .zip to the root of your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
-
Create a folder named Nintendo DSiWare inside of the <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
-
-
-
-
-
Deel II - BannerBomb3
-
-
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
-
-
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
-
Your console should show the BB3 multihax menu
-
-
-
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
-
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Yes, you can still install custom firmware on your 3DS, even after the closure of eShop.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
-Technical Details (optional)
-
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
-
-
-
-
This method requires a working 3DS camera.
-
-
Wat je nodig hebt
-
-
-
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructies
-
-
Deel I - Voorbereiding
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
-
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
-
-
-
-
-
-
-
-
Section II - freakyhax
-
-
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
Launch Freakyforms Deluxe
-
In the game menu, select Play -> Camera -> Load a QR code
-
Select the QR code
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Deel III - Boot9strap installeren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Druk op (Start) om op te slaan en opnieuw op te starten
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
-Technical Details (optional)
-
-
This method of using Seedminer for further exploitation uses your movable.sed file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application.
-
-
This is a currently working implementation of the “FIRM partitions known-plaintext” exploit detailed here.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
De nieuwste versie van Frogminer_save (Frogminer_save.zip)
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
-
-
Deel I - CFW Controle
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Zet je console uit
-
Houd de (Select) knop ingedrukt
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Zet je console uit
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
-
-
Deel II - Voorbereiding
-
-
In this section, you will copy the files necessary to temporarily replace DS Connection Settings with Flipnote Studio, which is used to launch the boot9strap (custom firmware) installer.
Voer een alfanumerieke naam in onder het “Username” veld (geen spaties of speciale tekens)
-
Under the “DSiBin” field, upload your DSiWare backup file (e.g. 42383841.bin) from the root of your SD card using the first “Browse…” option
-
Onder het veld “MovableSed”, upload je movable.sed bestand met behulp van de tweede “Browse…” optie
-
Under the “InjectionTarget” field, set the injection target to DSinternet (NOT memorypit)
-
Klik op “Build”
-
-
Wacht enkele seconden tot het bouwproces voltooid is
-
-
-
In the Build History section on the left, type the Username into the “Filter Builds” field
-
Klik op het eerste zoekresultaat
-
-
This result should have the latest timestamp
-
-
-
Klik op de “output_(name).zip” link
-
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
-
-
Copy the 42383841.bin file from the hax folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
-
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Copy boot.nds (B9STool) from the release .zip to the root of your SD card
-
Kopieer de private map van de Frogminer_save .zip naar de hoofdmap van je SD-kaart
-
Stop je SD-kaart terug in je console
-
-
Zet je console aan
-
-
-
-
-
-
Section III - Overwriting DS Connection Settings
-
-
In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.
-
-
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
If you would prefer a visual guide to this section, one is available here.
-
-
-
Ga terug naar het hoofdmenu van System Settings
-
Navigate to Internet Settings -> Nintendo DS Connections, then select “OK” (image)
-
If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
-
Using the touch-screen, select the large left box, then select the box with an SD card icon
-
Once the menu loads, select the face icon, then the bottom right icon to continue
-
Press (X) or (UP) on the D-Pad depending on which is shown on the top screen
-
Select the second button along the top with a film-reel icon
-
Scroll right until reel “3/3” is selected
-
Tap the third box with the letter “A” in it
-
Scroll left until reel “1/3” is selected
-
Tap the fourth box with the letter “A” in it
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Section V - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Using the D-Pad, move to “Install boot9strap”
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Press (A), then press START and SELECT at the same time to begin the process
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
You may have to force power off by holding the power button
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section VI - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Druk op (Start) om op te slaan en opnieuw op te starten
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
-
-
-
Section VII - Restoring DS Connection Settings
-
-
In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.
-
-
-
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
-
Copy the 42383841.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder, replacing the existing one
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
-Technical Details (optional)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Once we have movable.sed, we can edit the SD card data of the game Mario Kart 7 to install menuhax67, which will allow us to get Homebrew Launcher access.
-
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-
See here for information about Kartminer7, here for information about menuhax67, and here for information about nimdsphax.
-
-
-
-
Wat je nodig hebt
-
-
-
A physical or digital copy of Mario Kart 7 updated to the latest version (v1.2)
-
-
You can update Mario Kart 7 from eShop or by following the update prompt when you launch the game
-
-
-
A computer running Windows, macOS, or Linux
-
Your movable.sed file from completing Seedminer
-
The latest release of Kartminer7 (the release marked WINDOWS if you have a Windows computer, or the release marked LINUX-macOS if you have a macOS or Linux-based computer)
-
De nieuwste versie van boot9strap (directe download)
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
-
-
Section I - Preparing Mario Kart 7 data
-
-
In this section, you will have the 3DS generate some data in Mario Kart 7 that will be used to install the exploit in a later section.
-
-
-
Stop je SD-kaart terug in je console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
If you are prompted to, hit “Next” and “OK” to all of the prompts that you see
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press the (Home) button to suspend Mario Kart 7
-
Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
-
Zet je console uit
-
-
-
Section II - SD Card Prep Work
-
-
-
Plaats je SD kaart in je computer
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
-
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
-
Keep your SD card inserted in your computer, as it is still required in the next section
-
-
-
-
-
-
-
Section III - Installing Kartminer7
-
-
-
Extract the Release_BETA_mk7 .zip to somewhere on your computer (i.e. your desktop)
-
Copy your movable.sed file to the resources folder of the Release_BETA_mk7 folder
-
-
Ensure that the file is named exactly movable.sed
-
-
-
Open the backup folder inside of the Release_BETA_mk7 folder
-
Double-click on the BACKUP file corresponding to your console’s region (e.g. backup_USA if you have a USA copy of Mario Kart 7)
-
-
If you are unsure of your console region, you can check System Settings. U = USA; E = EUR, J = JPN
-
If you get a message from Windows Defender, click “More info”, “Run anyway”, then press any key to continue
-
If the backup was successful, you should see a new folder appear
-
If you wish to restore this data at a later date (after finishing this guide), insert your SD card and double-click on the RESTORE file corresponding to your console’s region
-
-
-
Go back to the Release_BETA_mk7 folder, then double-click on the file corresponding to your console’s region (e.g. USA if you have a USA copy of Mario Kart 7)
-
Stop je SD-kaart terug in je console
-
-
-
Section IV - Kartminer7
-
-
-
Zet je console aan
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press (A) over and over again
-
-
You should eventually see the “Start Race?” prompt, then the colours on the bottom screen should change from red, to blue, to white
-
If you see the red/blue/white screens but the 3DS crashes, just reboot and try again
-
If you don’t see ANY colours, change your system language (if possible), then try the exploit again
-
-
-
If the exploit was successful, the 3DS will have booted into the 3DS ROP xPloit Injector
-
-
-
Section V - Installing menuhax67
-
-
-
Press (Y) + (D-Pad Down) to install menuhax67
-
-
The console will automatically power off
-
-
-
Zet je console aan
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
-
-
-
-
-
Section VI - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Druk op (Start) om op te slaan en opnieuw op te starten
-
-
-
Section VII - Removing menuhax67
-
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
-
-
-
Start de Download Play applicatie ()
-
Wacht tot je de ‘Nintendo 3DS’ en ‘Nintendo DS’ knoppen ziet
-
Druk tegelijkertijd op (L) + (Down) + (Select) om het Rosalina menu te openen
-
Selecteer “Miscellaneous options”
-
Selecteer “Switch the hb. title to the current app.”
-
Druk op (B) om door te gaan
-
Druk op (B) om terug te gaan naar het Rosalina hoofdmenu
-
Druk op (B) om het Rosalina menu af te sluiten
-
Press (Home) to suspend Download Play
-
Press the “Close” button on the bottom screen to close Download Play
-
Re-launch the Download Play application
-
Your console should load the Homebrew Launcher
-
-
If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
-
-
-
Launch menuhax67_installer from the list of homebrew
-
Select REMOVE menuhax67
-
When you see “done.”, press (A), then press (A) on “EXIT to menu”
-
-
-
At this point, you can re-enable wireless communications.
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
-
-
Deel I - Voorbereiding
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
-
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Stop je SD-kaart terug in je console
-
-
-
-
-
-
-
-
-
Section II - menuhax67
-
-
In this section you will use the menuhax67 exploit installed earlier to launch nimdsphax, which will load SafeB9SInstaller.
-
-
-
Zet je console aan
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Deel III - Boot9strap installeren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Druk op (Start) om op te slaan en opnieuw op te starten
-
-
-
Section IV - Removing menuhax67
-
-
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
-
-
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
-
-
Your console will automatically reboot
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Navigeer naar Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare op je SD-kaart
-
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method requires a computer running Windows, Linux, or macOS. Phones or tablets are NOT currently supported. If you do not have access to a computer, you will need to use an alternate exploit.
+
This method requires a computer running Windows, Linux, or macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
-Technical Details (optional)
-
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
-
-
-
This method requires a working 3DS camera.
-
-
This process will overwrite your Cubic Ninja save file, if you have one.
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
-
-
Instructies
-
-
Deel I - Voorbereiding
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Copy Launcher.dat from the folder appropriate for your console from the ninjhax2-dx .zip file to the root of your SD card
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
-
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
-Technical Details (optional)
-
-
We use petit-compwner to launch b9sTool, which installs boot9strap.
-
-
See here for more information about petit-compwner.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
-
-
Wat je nodig hebt
-
-
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
-
-
Deel I - CFW Controle
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Zet je console uit
-
Houd de (Select) knop ingedrukt
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Zet je console uit
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
-
-
Deel II - Voorbereiding
-
-
In this section, you will copy the files necessary to launch b9sTool, which is used to launch the boot9strap (custom firmware) installer.
-
-
-
Plaats je SD kaart in je computer
-
Copy boot.nds (B9STool) from the release .zip to the root of your SD card
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
Stop je SD-kaart terug in je console
-
-
Zet je console aan
-
-
-
-
-
-
Section III - petit-compwner
-
-
In this section, you will scan the QR codes needed to trigger the petit-compwner exploit.
-
-
-
Open the latest release of petit-compwner on your computer
-
On your console, launch Petit Computer
-
Select File Management
-
Select Read QR Codes
-
Scan each QR code in order, from 1/5 to 5/5
-
Once you have scanned all the QR codes, exit File Management
-
Select View Gallery
-
Launch the PWN program
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
Deel IV - Boot9strap installeren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Using the D-Pad, move to “Install boot9strap”
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Press (A), then press START and SELECT at the same time to begin the process
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
You may have to force power off by holding the power button
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section V - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Druk op (Start) om op te slaan en opnieuw op te starten
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
Wat je nodig hebt
-
-
-
The game “Pokémon Picross” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Pokémon Picross
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructies
-
-
Deel I - Voorbereiding
-
-
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
-
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
-
-
-
-
-
-
-
-
Section II - PicHaxx
-
-
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
This set of instructions does not support the Japanese version of SmileBASIC. The guide for that version can be found here.
-
-
-Technical Details (optional)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
Wat je nodig hebt
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructies
-
-
Deel I - Voorbereiding
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
-
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Copy the petitcom .icn for your region to the root of your SD card
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
Update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
-
-
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
-
-
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Deel III - Boot9strap installeren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Druk op (Start) om op te slaan en opnieuw op te starten
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
This set of instructions does not support the USA and EUR versions of SmileBASIC. The guide for those versions can be found here.
-
-
-Technical Details (optional)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
Wat je nodig hebt
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructies
-
-
Deel I - Voorbereiding
-
-
Make sure SmileBASIC is updated to the latest version
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
-
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
DO NOT update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
Deel III - Boot9strap installeren
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Veel van deze instellingen kunnen nuttig zijn voor aanpassing of debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
Druk op (Start) om op te slaan en opnieuw op te starten
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
-Technical Details (optional)
-
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
Wat je nodig hebt
-
-
-
The game “Steel Diver: Sub Wars” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
De nieuwste versie van Luma3DS (het Luma3DS .zip bestand)
-
The latest release of HBL otherapps (direct download)
-
-
-
Instructies
-
-
Deel I - Voorbereiding
-
-
In this section, you will copy some of the files that will be used to launch the Homebrew Launcher.
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Kopieer boot.firm en boot.3dsx van de Luma3DS .zip naar de hoofdmap van je SD-kaart
-
-
De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
-
-
-
Maak een map genaamd boot9strap op de hoofdmap van je SD-kaart
-
Kopieer boot9strap.firm en boot9strap.firm.sha van de boot9strap .zip naar de /boot9strap/ map op je SD-kaart
-
Kopieer SafeB9SInstaller.bin van de SafeB9SInstaller .zip naar de hoofdmap van je SD-kaart
-
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card and rename it to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Maak een map genaamd “3ds” op de hoofdmap van je SD-kaart als die nog niet bestaat
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
-
-
-
-
-
-
-
-
Section II - Steelminer
-
-
In this section, you will create a hacked Steel Diver: Sub Wars save file that, when used, will load the Homebrew Launcher on your console.
-
-
-
Launch “Steel Diver: Sub Wars” once and select a Mii to initialize your save file
-
-
Decline the game update when prompted
-
If you have already updated the game, use the Data Management menu of the System Settings to delete the update
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
If this is your first time modding a 3DS (or you’re unfamiliar with technology), keep reading! Otherwise, if you have prior experience and know what you’re doing, continue to Get Started.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
-Technical Details (optional)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Ga naar de Nintendo 3DS map op je SD-kaart
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Zoek je Mii profiel, zoek dan naar het “Friend Code” veld op het bovenste scherm
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Zet je console uit
-
-
-
-
-
Next steps
-
-
Select the method based on the application that you have installed on your 3DS. No matter which method you pick, the end result will be the same.
-
-
Mario Kart 7
-
-
This method uses a cartridge or digital copy of Mario Kart 7. Using the movable.sed file, you can modify Mario Kart 7’s SD card data that will give you access to Homebrew Launcher, which will be used for further exploitation.
If you own any DSiWare title on your 3DS, you can dump it to the SD card so that it can be used to temporarily inject Flipnote into DS Connection Settings.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-
-
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don’t know what those are or do not have the hardware necessary, join Nintendo Homebrew on Discord, open the “#mii-mining-assistance” channel and provide the following:
-
-
Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
-
Your console’s ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see this troubleshooting section if you have multiple)
-
Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
Your console’s year of manufacturing; if you don’t know, don’t say it - it’s not super important
-
-
-
-
-Technical Details (optional)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Because we do not have access to the Friends List, we are deriving the first part of movable.sed using a Mii QR code instead of by performing a two-way friend exchange.
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
-
-
-
-
-
Section I - Prep Work
-
-
In this section, you will set up Seedminer and obtain your console’s files that are needed for mining.
-
-
-
Extract the contents of the Seedminer .zip and move the folder with your operating system’s name to anywhere on your computer
-
-
Keep this location handy, as this Seedminer folder will be where multiple other files are placed
-
-
-
In the Seedminer folder, hold SHIFT and right-click anywhere in the folder’s empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
-
In the command line window, type py -3 -m pip install pycryptodomex, hit ENTER, and allow it to install
-
-
If this command fails with the error No module named pip, you must manually install pip. The methods to do this can be found on this page.
-
-
-
Power on your console while the SD card is inserted
-
Open the Mii Maker app
-
Tap the “QR Code/Image Options” button
-
Tap “Save Mii as QR Code”
-
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Ga naar de Nintendo 3DS map op je SD-kaart
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Click on “Import from…”, then select “QR Code” and upload the Mii QR code from earlier
-
Click on “Export to…”, then select “encrypted (.bin)”
-
-
This will download a file named input.bin
-
-
-
Copy this input.bin to the Seedminer folder
-
Open the terminal/PowerShell/Command Prompt window from earlier
-
Inside this window, enter the command py -3 seedminer_launcher3.py id0 <id0>
-
-
Replace <id0> with the ID0 you copied into a document
-
Do not include the angle brackets
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Once it completes, enter the command py -3 seedminer_launcher3.py mii <model> <year>
-
-
Replace <model> with the model of your console (new or old) - if you aren’t sure, only models with the ZL/ZR buttons and C-Stick are “new”
-
Replace <year> with the year the 3DS was made (On Old 3DS consoles, the years on the backplate, (M)2010/(C)2011, are always the same and NOT an indicator) - if you aren’t sure, see below
-
Estimate manufacturing years are: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
You can also leave the year empty, which will make it start in the middle
-
The mining process will usually take up to 90 minutes, depending on luck and your GPU’s strength
-
The first stage will likely max out at roughly offset 1500, depending on console model
-
If the second stage (after seeing movable_part2.sed generation success) gets past offset 100, verify that you input the correct ID0. If your ID0 is correct, you cannot use this method and will have to update to the latest version and see if a non-Seedminer method is available for you here
-
If you see the message input.bin is invalid size, remake the input.bin using your QR Code. If it still fails, open a different browser and remake the input.bin there
-
If you see the message LFCS has been left blank, use the opposite console model (e.g. mii old instead of mii new)
-
-
-
When it finishes, a file called movable.sed will appear in the Seedminer folder
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
-
-Technical Details (optional)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Ga naar de Nintendo 3DS map op je SD-kaart
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Zoek je Mii profiel, zoek dan naar het “Friend Code” veld op het bovenste scherm
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Zet je console uit
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Ga naar de Nintendo 3DS map op je SD-kaart
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
Zoek je Mii profiel, zoek dan naar het “Friend Code” veld op het bovenste scherm
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Zet je console uit
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
-
-
-Multiple long folder names in Nintendo 3DS folder
-
-
-
-
This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. Om erachter te komen welke lange mapnaam correct is voor je 3DS, volg dan deze instructies:
-
-
-
Hernoem de Nintendo 3DS map naar BACKUP_Nintendo 3DS
-
Stop je SD-kaart terug in je console
-
Zet je console aan
-
Wait for the console to generate the SD card data
-
-
Je applicaties zullen verdwenen zijn. Dit is normaal en wordt binnenkort opgelost
-
-
-
Zet je console uit
-
Plaats je SD kaart in je computer
-
Ga naar de Nintendo 3DS map op je SD-kaart
-
Kopieer de 32-tekens lange naam van de map die je ziet
-
Hernoem de BACKUP_Nintendo 3DS map naar Nintendo 3DS
-
-
-
-
-Bruteforce Movable skips to step 4
-
-
De website heeft al je movable.sed gemijnd met je friend code en ID0 combinatie. Je kunt de ‘movable.sed’ gebruiken die het je biedt.
-
-
-
-Important! You have been locked out of the automated part1 dumper system...
-
-
Je friend code is geblokkeerd voor het gebruik van de friend code bot omdat je 3DS de bot niet succesvol heeft bevriend. Zorg ervoor dat je 3DS correct is verbonden met het internet, ga dan naar de Nintendo Homebrew Discord server en vraag om ontgrendeld te worden.
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
De website heeft bepaald dat jouw ‘movable.sed’ niet kan gebruteforced worden. Zorg ervoor dat je de website het juiste ID0 gegeven hebt. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
-
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
-
-
-
-
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
-
-
-
-
-
-
Your SD card should now look something like this:
-
-
-
-
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
-
-
-
-
-DSiWare Management menu crashes without showing BB3 multihax menu
-
Zorg ervoor dat F00D43D5.bin het enige bestand in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare is. If it is, then re-create it with the Bannerbomb3 Injector.
-
-
Also, ensure that bb3.bin is on the root of the SD card. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.
-
-
If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
-
-
-
-DSiWare Management menu displays "No accessible software data."
-
-
F00D43D5.bin bevindt zich niet in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. Zorg ervoor dat Nintendo DSiWare correct gespeld is en een spatie heeft. Hoofdletters/kleine letters maken niet uit.
-
-
-
-DSiWare Management shows a question mark
-
-
Er kan een probleem zijn met je F00D43D5.bin bestand (het kan beschadigd zijn of bedoeld voor een andere 3DS). Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
-
-
-
Installing boot9strap (Fredtool-Inject)
-
-
-Error on DSiHaxInjector page
-
-
Zorg ervoor dat je movable.sed en DSiWare back-up van dezelfde console komen. Een mismatch resulteert in een error.
-
-
-
-"Haxxxxxxxxx!" does not appear
-
-
Er is een probleem met je 42383821.bin bestand (het is onjuist, het ontbreekt, werd misplaatst of is beschadigd). Re-create your files with the DSIHaxInjector_new website and ensure that you place the 42383821.bin file from output.zip -> hax in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare.
-
-
-
-DSiWare launches normally
-
-
Haxxxxxxxxx! is niet van je SD-kaart naar het systeemgeheugen gekopieerd.
-
-
-
-SD card is grayed out in Flipnote
-
-
Flipnote kan een lange tijd nemen om je kaart te indexeren als je een grote SD-kaart hebt. Laat het een aantal minuten blijven zitten.
-
-
-
-Lenny face verschijnt niet in SD-kaart sectie
-
-
Je hebt de private map niet van Frogminer_save .zip naar de hoofdmap van je SD-kaart gekopieert.
-
-
-
-Flipnote bevriest
-
-
Het zou kunnen dat je per ongelijk het touch screen hebt aangeraakt terwijl de gemodificeerde Flipnote open stond. Voer je DS Connection Settings opnieuw in en zorg ervoor dat je niet per ongelijk het touchscreen gebruikt.
-
-
-
-Green screen after pasting
-
-
Het bestand boot.nds ontbreekt of is misplaatst. Download de nieuwste versie van b9stool en plaats boot.nds op de hoofdmap van je SD-kaart, ter vervanging van het bestaande bestand.
-
-
-
-White screen after pasting
-
Er is een probleem met je boot.nds bestand. Download de nieuwste versie van b9stool opnieuw en plaats boot.nds op de hoofdmap van je SD-kaart, ter vervanging van het bestaande bestand.
-
-
-
-Unable to open Luma3DS configuration menu after running B9STool
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
-
-"An exception occurred" or Errdisp when opening Picross
-
-
Your console already has custom firmware. Je zou best controleren op CFW.
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
-
-Game starts normally
-
-
Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.
Mocht dit niet lukken, gebruik dan een andere SD-kaart.
-
Installing boot9strap (SSLoth-Browser)
-
-
-Red/purple/pink and white screen after running Browserhax
-
-
Dit geeft waarschijnlijk aan dat je al custom firmware hebt. Je zou best controleren op CFW.
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
The file arm11code.bin is missing or misplaced. Download de nieuwste versie van universal-otherapp, plaats otherapp.bin op de hoofdmap van je SD-kaart en hernoem het naar arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There may be an issue with your arm11code.bin file. Download de nieuwste versie van universal-otherapp, plaats otherapp.bin op de hoofdmap van je SD-kaart en hernoem het naar arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
You can also try resetting your browser save data:
-
-
-
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
-
Try the exploit again
-
-
-
-
-
-Opening the browserhax QR code or URL crashes
-
-
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
-
-
-
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
-
-
-
-"PrepareArm9ForTwl returned error c8804631!"
-
-
Maak een back-up van je data en herformatteer je SD-kaart als FAT32 met het aanbevolen hulpmiddel afhankelijk van je besturingssysteem: (Windows, macOS of Linux). MiniTool Partition Wizard en het formatteer programma van HP (HPUSBDisk) zijn ervoor bekend om problemen te veroorzaken met 3DS SD-kaarten.
-
-
Mocht dit niet lukken, gebruik dan een andere SD-kaart.
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-"An error has occurred. Please save your data in any software currently in use, then restart the system."
-
-
The date is set incorrectly. To set it correctly, follow these steps:
-
-
-
Select the System Settings icon on the HOME Menu, and tap Open.
-
Tap Other Settings.
-
Tap Date & Time.
-
Tap Today’s date.
-
Tap Up/Down Arrows to set the correct Day, Month and Year.
-
Select OK to confirm.
-
-
-
If the problem persists:
-
-
-
Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
-
Ensure that you selected the correct payload for your region AND system version
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
-
Try the exploit again
-
-
-
Try changing the system language to something other than the current language
-
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
-
-
-
-
-
-
-An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
-
-
Dit geeft waarschijnlijk aan dat je al custom firmware hebt. Je zou best controleren op CFW.
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -979,6 +571,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1078,7 +679,7 @@ window.cookieconsent.initialise({
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
-
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
+
Try the exploit again
+
+
+
Try changing the system language to something other than the current language
+
+
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
+
+
+
+
+
+
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
+
+
Dit geeft waarschijnlijk aan dat je al custom firmware hebt. Je zou best controleren op CFW.
+
+
+
+
Installing boot9strap (SSLoth-Browser)
+
+
+Red/purple/pink and white screen after running Browserhax
+
+
Dit geeft waarschijnlijk aan dat je al custom firmware hebt. Je zou best controleren op CFW.
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
The file arm11code.bin is missing or misplaced. Download de nieuwste versie van universal-otherapp, plaats otherapp.bin op de hoofdmap van je SD-kaart en hernoem het naar arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
+
+
+
+"An error has occurred, forcing the software to close..." (white message box)
+
+
There may be an issue with your arm11code.bin file. Download de nieuwste versie van universal-otherapp, plaats otherapp.bin op de hoofdmap van je SD-kaart en hernoem het naar arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
+
+
You can also try resetting your browser save data:
+
+
+
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
+
Try the exploit again
+
+
+
+
+
+Opening the browserhax QR code or URL crashes
+
+
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
+
+
+
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Voeg de .bin extensie niet toe als je het nog niet ziet.
+
+
+
+"PrepareArm9ForTwl returned error c8804631!"
+
+
Maak een back-up van je data en herformatteer je SD-kaart als FAT32 met het aanbevolen hulpmiddel afhankelijk van je besturingssysteem: (Windows, macOS of Linux). MiniTool Partition Wizard en het formatteer programma van HP (HPUSBDisk) zijn ervoor bekend om problemen te veroorzaken met 3DS SD-kaarten.
+
+
Mocht dit niet lukken, gebruik dan een andere SD-kaart.
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
Verplicht te lezen
-
-
To use the Seedminer exploit, you must update your console to the latest system version.
-
-
Wat je nodig hebt
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
De updater kan een bericht weergeven met de woorden “Your system is up to date” in plaats van te updaten. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
Verplicht te lezen
-
-
To use the super-skaterhax exploit, you must update your console to the latest system version.
-
-
Wat je nodig hebt
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
De updater kan een bericht weergeven met de woorden “Your system is up to date” in plaats van te updaten. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
Vind je dit een goede handleiding? We accepteren donaties.
-
-
-
-
-
-
Verplicht te lezen
-
-
To use the MSET9 exploit, you must update your console to the latest system version.
-
-
Wat je nodig hebt
-
-
-
An internet connection on your console
-
-
-
Section I - Updating the System
-
-
-
Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
-
-
De updater kan een bericht weergeven met de woorden “Your system is up to date” in plaats van te updaten. This is normal if you are already up to date; continue to the next section
-
If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
MSET9 é o único exploit para consoles 3DS / 3DS XL / 2DS no firmware 11.17.0 que é gratuito e não precisa de nenhum software. Se você não pode usá-lo, você precisará de um destes métodos, dos quais todos tem algum tipo de pré-requisito.
-
-
Aplicativos da eShop instalados
-
-
Como a Nintendo eShop não permite mais compras, não é mais possível comprar novos aplicativos. No entanto, você pode baixar novamente um aplicativo se tiver comprado ou baixado ele antes das compras deixarem de ser possíveis.
-
-
Qualquer um dos seguintes aplicativos pode ser usado em conjunto com o Seedminer para instalar custom firmware:
-
-
Mario Kart 7 (aplicativo comum pré-instalado; um cartucho físico também funciona)
-
Pokémon Picross (gratuito para jogar; apenas digital)
-
Steel Diver: Sub Wars (gratuito para jogar; apenas digital)
-
QUALQUER aplicativo DSiWare (gratuito ou pago; apenas digital)
Esse método requer um flashcart de DS que seja compatível com o ntrboot, que funciona em todos os consoles da família 3DS, independentemente do modelo ou região.
-
-
Se nenhuma das opções acima estiverem disponíveis para você, esta é a opção mais barata disponível. Se você ainda não tiver um cartucho compatível, um cartucho pré-flashed e compatível com ntrboot pode ser comprado aqui por cerca de $20 USD.
Para fazer o dump do sistema DSiWare, nós executamos um exploit em uma falha na janela do Gerenciador de Dados do DSiWare no aplicativo Configuração do Console.
-
-
Para fazer isso, usamos a chave de criptografia do seu sistema (movable.sed) para construir um backup de DSiWare que faz exploit do sistema para fazer um dump do aplicativo Conexões Nintendo DS para a raiz do SD.
-
-
Assim que tiver um backup de DSiWare, um aplicativo exploitable de DSiWare pode ser inserido no DS Download Play, que pode ser usado para instalar um custom firmware.
-
-
Essas instruções são APENAS para consoles tailandeses (indicados por um T no final da versão do sistema, ex. 11.16.0-39T)! Se o seu console for de qualquer outra região, escolha o outro método.
-
-
O que você precisa
-
-
-
Seu arquivo movable.sed obtido por completar Seedminer
-
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
A versão mais recente do Frogminer_save (Frogminer_save.zip)
-
-
-
Seção I - Checando por CFW
-
-
Como uma medida de segurança adicional, realizaremos uma verificação adicional de custom firmware. Isso é porque usar esse método quando custom firmware já está instalado tem o risco de danificar o console (renderizando-o sem métodos de recuperação como ntrboot).
-
-
-
Desligue seu console
-
Segure o botão (Select)
-
Ligue o seu console enquanto ainda segura o botão (Select)
-
Se a verificação foi bem-sucedida, você iniciará no Menu HOME e poderá prosseguir com este guia
-
Desligue seu console
-
-
-
Se você ver um menu de configuração ou o console é imediatamente desligado, você já possui CFW e continuar com estas instruções pode causar um BRICK no seu console! Siga Checando por CFW para atualizar o seu CFW existente.
-
-
Seção II - Preparação
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Copie boot.nds (B9STool) do .zip para a raiz do seu cartão SD
-
Copie a pasta private do .zip do Frogminer_save para a raiz do seu cartão SD
-
Mantenha o seu cartão SD no seu computador - há mais coisas a fazer na próxima seção
Sob o campo “Username”, digite qualquer nome alfanumérico (sem espaços ou caracteres especiais)
-
Sob o campo “MovableSed”, envie seu movable.sed usando a opção “Browse…”
-
Clique em “Build”
-
-
Aguarde alguns segundos para que o processo de compilação termine
-
-
-
Na seção Build History à esquerda, digite o nome de usuário no campo “Filter Builds”
-
Clique no primeiro resultado da pesquisa
-
-
Esse resultado deve ter a última marcação de tempo
-
-
-
Clique no link “output_(nome).zip”
-
Navegue até Nintendo 3DS -> <ID0> ->` em seu cartão SD
-
-
<ID0> é o nome da pasta de 32 caracteres que você copiou em Seedminer
-
<ID1> é uma pasta de 32 caracteres dentro da pasta <ID0>
-
Se você tiver múltiplas pastas `, siga as instruções [aqui](troubleshooting#bannerbomb3)
-
-
-
Crie uma pasta chamada Nintendo DSiWare dentro do <ID1>
-
-
Se você já teve a pasta e existem algum arquivo de backup de DSiWare existente (`<8-character-id>.bin) dentro desta pasta, copie-os para o seu computador e remova-os do seu cartão SD
-
-
-
Abra o arquivo output_(nome) .zip e navegue até China_Taiwan -> output_setup
-
Copie todos os seis arquivos .bin para a pasta Nintendo DSiWare
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
Abra as Configurações do Sistema no seu console
-
Navegue até Gerenciador de Dados -> DSiWare -> Cartão SD -> (página 2)
-
Observe que número está no aplicativo DSiWare da segunda página (será um número entre 1 e 6)
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Navegue até Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare no seu cartão SD
-
Abra o arquivo output_(nome) .zip e navegue até China_Taiwan -> output_hax
-
Copie o arquivo .bin que é o mesmo número que estava na segunda página do menu do Gerenciador de DSiWare na pasta Nintendo DSiWare, e substitua quando solicitado
-
Ligue o seu console
-
Abra as Configurações do Sistema no seu console
-
Navegue para Gerenciamento de dados -> DSiWare -> Cartão SD (imagem)
-
Espere um pouco
-
-
O seguinte deve acontecer, nesta ordem: um pouco de progresso, um pequeno congelamento, a tela inferior fica roxa, a música parando, depois o console exibindo uma mensagem de erro e reiniciando
-
Se você não viu a tela roxa, então algo deu errado
-
-
-
Agora você deve ter o arquivo 42383821.bin na raiz do seu cartão SD
-
Navegue até Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare no seu cartão SD
-
Apague todos os arquivos .bin da pasta Nintendo DSiWare
Sob o campo “Username”, digite qualquer nome alfanumérico (sem espaços ou caracteres especiais)
-
-
Talvez você queira colocar um nome diferente para diferenciar do arquivo do BannerBomb3
-
-
-
Sob o campo “DSiBin”, coloque seu arquivo 42383821.bin usando a primeira opção “Browse…”
-
Sob o campo “MovableSed”, coloque seu arquivo movable.sed usando a segunda opção “Browse…”
-
Sob o campo “InjectionTarget”, defina o alvo de injeção como DSdownloadplay (NÃO o memorypit)
-
Clique em “Build”
-
-
Aguarde alguns segundos para que o processo de compilação termine
-
-
-
Na seção Build History à esquerda, digite o nome de usuário no campo “Filter Builds”
-
Clique no primeiro resultado da pesquisa
-
-
Esse resultado deve ter a última marcação de tempo
-
-
-
Clique no link “output_(nome).zip”
-
Navegue até Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare no seu cartão SD
-
Copie o arquivo 484E4441.bin da pasta hax do arquivo DSiWare baixado (output_(nome).zip) para a pasta Nintendo DSiWare
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
Abra as Configurações do Sistema no seu console
-
Navegue para Gerenciador de Dados -> DSiWare
-
Na seção “Cartão SD”, selecione o aplicativo “Haxxxxxxxxxxx!”
-
Selecione “Copy”, então selecione “OK”
-
-
-
Seção V - Flipnote Exploit
-
-
Nesta seção, você executará uma série de passos muito específicos dentro do Flipnote Studio que, quando executado corretamente, irá iniciar o b9sTool, o instalador do boot9strap (custom firmware).
-
-
Caso você prefira um guia visual para esta seção, há um disponível aqui.
-
-
-
Saia da Configuração do Console
-
Inicie o Download Play no seu console (o ícone laranja com um 3DS nele)
-
Selecione “Nintendo DS”
-
Se o exploit foi bem sucedido, seu 3DS será carregado na versão japonesa do Flipnote Studio
-
Complete o processo inicial do jogo até você chegar no menu principal
-
-
Selecione a opção da esquerda sempre que solicitado durante o processo de instalação
Usando a touch-screen, selecione a caixa grande da esquerda, então selecione a caixa com um ícone do cartão SD
-
Quando o menu carregar, selecione o ícone do rosto, então o ícone no canto inferior direito para continuar
-
Aperte (X) ou (CIMA) no D-Pad dependendo do que for mostrado na tela superior
-
Selecione o segundo botão no topo com um ícone de rolo de filme
-
Role até o rolo “3/3” ser selecionado
-
Toque na terceira caixa com a letra “A” nela
-
Role à esquerda até o rolo “1/3” ser selecionado
-
Toque na quarta caixa com a letra “A” nela
-
Se o exploit foi bem sucedido, seu console irá abrir o b9sTool
-
-
-
Seção VI - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Usando os botões direcionais, mova para “Install boot9strap”
-
-
Se você perder este passo, o sistema irá voltar para o Menu HOME ao invés de instalar o boot9strap e você precisará abrir o DS Download Play e reiniciar essa seção desde o início
-
-
-
Pressione (A), depois pressione START e SELECT ao mesmo tempo para iniciar o processo
-
Assim que for concluído e a tela inferior dizer “done.”, saia do b9sTool, depois desligue o seu console
-
-
Você pode ter que forçar o desligamento segurando o botão POWER
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
Se você ver a tela de configuração do Luma, desligue o console e continue para a próxima seção
-
-
-
-
-
Seção VII - Configuração do Luma3DS
-
-
-
Aperte e segure (Select) e enquanto segura (Select), ligue seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
Seção VIII - Restaurando o DS Download Play
-
-
-
Navegue até Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare no seu cartão SD
-
Copie o arquivo 484E4441.bin da pasta clean do arquivo DSiWare baixado (output_(nome).zip) para a pasta Nintendo DSiWare
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
Abra as Configurações do Sistema no seu console
-
Navegue para Gerenciador de Dados -> DSiWare
-
Na seção “Cartão SD”, selecione o aplicativo “Haxxxxxxxxxxx!”
-
Selecione “Copy”, então selecione “OK”
-
Saia da Configuração do Console
-
Desligue seu console
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Para iniciar o código personalizado, nós usamos um exploit no Gerenciamento de Dados DSiWare no aplicativo Configurações do Sistema.
-
-
Para fazer isso, usamos a chave de criptografia do seu sistema (movable.sed) para construir um backup de DSiWare que se aproveita do exploit do sistema.
-
-
Para obter uma explicação mais técnica, veja aqui.
-
-
-
Notas de Compatibilidade
-
-
Essas instruções funcionam nas versões de consoles EUA, Europa, Japão e Coréia, indicadas pelas letras U, E, J ou K após a versão do sistema.
-
-
Se você tiver um console tailandês (indicado por um T após a versão do sistema), siga esta página ao invés desta.
-
-
O que você precisa
-
-
-
Seu arquivo movable.sed de completar Seedminer
-
A versão mais recente do BannerBomb3 (Release_v3.0.zip, download direto)
-
-
-
Seção I - Preparação
-
-
Nesta seção, você irá copiar os arquivos necessários para acionar o exploit BannerBomb3 no cartão SD do seu console.
Envie seu movable.sed usando a opção “Choose File”
-
Clique em “Build and Download”
-
-
Isto irá baixar um DSiWare chamado F00D43D5.bin, que estará contido em um arquivo zip (BannerBomb3.zip)
-
-
-
Copie bb3.bin do Release_v3.0.zip para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
Este arquivo não precisa ser aberto ou extraído
-
-
-
-
Copie Launcher.dat da pasta para seu modelo e região dentro do Release .zip para a raiz do seu cartão SD
-
Navegue até Nintendo 3DS -> <ID0> ->` em seu cartão SD
-
-
<ID0> é o nome da pasta de 32 caracteres que você copiou em Seedminer
-
<ID1> é uma pasta de 32 caracteres dentro da pasta <ID0>
-
Se você tiver múltiplas pastas `, siga as instruções [aqui](troubleshooting#bannerbomb3)
- {: .notice--info}
-
-
-
Crie uma pasta chamada Nintendo DSiWare dentro do <ID1>
-
-
Se você já teve a pasta e existem algum arquivo de backup de DSiWare existente (`<8-character-id>.bin) dentro desta pasta, copie-os para o seu computador e remova-os do seu cartão SD
-
-
-
Copie o arquivo F00D43D5.bin do BannerBomb3.zip para a pasta Nintendo DSiWare
-
-
-
-
-
Seção II - BannerBomb3
-
-
Nesta seção, você irá acionar o exploit BannerBomb3 usando o menu de Gerenciamento de DSiWare e usá-lo para instalar o exploit menuhax67.
-
-
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
Abra as Configurações do Sistema no seu console
-
Navegue para Gerenciamento de dados -> DSiWare -> Cartão SD (imagem)
-
-
Seu console deve mostrar o menu multihax do BB3
-
-
-
Use os botões direcionais para navegar e pressione o botão (A) para selecionar “Install *hax”
-
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
-
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua. Os métodos em firmwares mais antigos são mais fáceis e mais estáveis.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Ambos New3DS e Old3DS agora tem métodos de software gratuitos que (na maior parte) não requer nenhum hardware ou software externo.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Sim, você ainda pode instalar custom firmware no seu 3DS, mesmo após o encerramento da eShop.
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
-
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua. Os métodos em firmwares mais antigos são mais fáceis e mais estáveis.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Ambos New3DS e Old3DS agora tem métodos de software gratuitos que (na maior parte) não requer nenhum hardware ou software externo.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
freakyhax é um exploit para o jogo Freakyforms Deluxe descoberto e publicado por plutooo. Funciona nas versões de 9.0.0 a 11.17.0 nos consoles da região EUR, EUA e JPN.
-
-
-
-
Este método requer uma câmera de 3DS funcional.
-
-
O que é necessário
-
-
-
Uma cópia EUR/EUA/JPN de Freakyforms Deluxe (eShop ou cartucho)
A versão mais recente do boot9strap (download direto)
-
A versão mais recente do nimdsphax (download direto)
-
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
-
A versão mais recente do HBL otherapps (download direto)
-
-
-
Instruções
-
-
Seção I - Preparação
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Copie todos os arquivos e pastas dentro da pasta /build/<your console and region>/exploit/ do .zip do freakyhax para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Copie o otherapp payload para o seu modelo/região/versão do otherapps.zip para a raiz do seu cartão SD, e então renomeie o payload para otherapp.bin
-
-
Não adicione a extensão .bin se você não a vê
-
-
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
-
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
-
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
-
-
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
-
-
-
Copie a pasta nimdsphax do nimdsphax .zip para a pasta /3ds/ no seu cartão SD
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
-
-
-
-
-
-
-
-
Seção II - freakyhax
-
-
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
Inicie Freakyforms Deluxe
-
No menu do jogo, selecione Play -> Camera -> Load a QR Code
-
Selecione o código QR
-
Seu console terá inicializado o Homebrew Launcher
-
Abra o nimdsphax da lista de homebrew
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
-
Se o seu console congela em uma tela vermelha, segure o botão POWER até que ele desligue e tente esta seção novamente
-
-
-
-
-
Seção III - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
-
-
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
-
-
-
Quando concluído, aperte (A) para reiniciar o seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este método de usar o Seedminer para exploiting usa seu arquivo movable.sed para descriptografar qualquer aplicativo DSiWare para fins de injetar um título de DSiWare exploitable nas Configurações de Internet do DS.
-
-
Esta é uma implementação funcional do exploit “FIRM partitions known-plaintext” detalhado aqui.
-
-
-
-
Você só deve ser capaz de chegar a esta página se você estiver executando a versão 11.17.0. Se você estiver em algum firmware diferente de 11.17.0 ou 11.16.0, PARE ou estas instruções VÃO CAUSAR UM BRICK em outros firmwares!!
A versão mais recente do Frogminer_save (Frogminer_save.zip)
-
usuários 11.16.0 ou 11.17.0: A versão 6.1.1 da b9sTool
-
-
Tenha certeza absoluta de que você está em um desses firmware, já que estar em outros firmwares pode levar a um BRICK
-
-
-
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
-
-
-
Seção I - Checando por CFW
-
-
Como uma medida de segurança adicional, realizaremos uma verificação adicional de custom firmware. Isso é porque usar esse método quando custom firmware já está instalado tem o risco de danificar o console (renderizando-o sem métodos de recuperação como ntrboot).
-
-
-
Desligue seu console
-
Segure o botão (Select)
-
Ligue o seu console enquanto ainda segura o botão (Select)
-
Se a verificação foi bem-sucedida, você iniciará no Menu HOME e poderá prosseguir com este guia
-
Desligue seu console
-
-
-
Se você ver um menu de configuração ou o console é imediatamente desligado, você já possui CFW e continuar com estas instruções pode causar um BRICK no seu console! Siga Checando por CFW para atualizar o seu CFW existente.
-
-
Seção II - Preparação
-
-
Nesta seção, você copiará os arquivos necessários para substituir temporariamente as Configurações de Conexões Nintendo DS com Flipnote Studio, que é usado para iniciar o instalador boot9strap (custom firmware).
Sob o campo “Username”, digite qualquer nome alfanumérico (sem espaços ou caracteres especiais)
-
Sob o campo “DSiBin”, faça o upload do seu arquivo de backup DSiWare (por exemplo, 42383841.bin) da raiz do seu cartão SD usando a primeira opção “Browse…”
-
Sob o campo “MovableSed”, coloque seu arquivo movable.sed usando a segunda opção “Browse…”
-
Sob o campo “InjectionTarget”, defina o alvo de injeção como DSinternet (NÃO memorypit)
-
Clique em “Build”
-
-
Aguarde alguns segundos para que o processo de compilação termine
-
-
-
Na seção Build History à esquerda, digite o nome de usuário no campo “Filter Builds”
-
Clique no primeiro resultado da pesquisa
-
-
Esse resultado deve ter a última marcação de tempo
-
-
-
Clique no link “output_(nome).zip”
-
Navegue até Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare no seu cartão SD
-
-
<ID0> é o nome da pasta de 32 caracteres que você copiou em Seedminer
-
<ID1> é uma pasta de 32 caracteres dentro da pasta <ID0>
-
-
-
Copie o arquivo 42383841.bin da pasta hax do arquivo DSiWare baixado (output_(nome).zip) para a pasta Nintendo DSiWare
-
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Copie boot.nds (B9STool) do .zip para a raiz do seu cartão SD
-
Copie a pasta private do .zip do Frogminer_save para a raiz do seu cartão SD
-
Reinsira o cartão SD no seu console
-
-
Ligue o seu console
-
-
-
-
-
-
Seção III - Substituindo as Configurações de Conexão DS
-
-
Nesta seção, você irá copiar as Configurações de DS do DSiWare para a memória interna, que irá substituí-la temporariamente pelo Flipnote Studio.
-
-
-
Abra as Configurações do Sistema no seu console
-
Navegue para Gerenciamento de dados -> DSiWare -> Cartão SD (imagem)
Nesta seção, você executará uma série de passos muito específicos dentro do Flipnote Studio que, quando executado corretamente, irá iniciar o b9sTool, o instalador do boot9strap (custom firmware).
-
-
Caso você prefira um guia visual para esta seção, há um disponível aqui.
-
-
-
Retorne ao menu principal da Configuração do Console
-
Navegue até Configurações da Internet -> Conexões Nintendo DS, depois selecione “OK” (image)
-
Se o exploit foi bem sucedido, seu console irá abrir a versão JPN do Flipnote Studio
-
Usando a touch-screen, selecione a caixa grande da esquerda, então selecione a caixa com um ícone do cartão SD
-
Quando o menu carregar, selecione o ícone do rosto, então o ícone no canto inferior direito para continuar
-
Aperte (X) ou (CIMA) no D-Pad dependendo do que for mostrado na tela superior
-
Selecione o segundo botão no topo com um ícone de rolo de filme
-
Role até o rolo “3/3” ser selecionado
-
Toque na terceira caixa com a letra “A” nela
-
Role à esquerda até o rolo “1/3” ser selecionado
-
Toque na quarta caixa com a letra “A” nela
-
Se o exploit foi bem sucedido, seu console irá abrir o b9sTool
-
-
-
Seção V - Instalando boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Usando os botões direcionais, mova para “Install boot9strap”
-
-
Se você perder este passo, o sistema irá voltar para o Menu HOME ao invés de instalar o boot9strap e você precisará abrir o DS Download Play e reiniciar essa seção desde o início
-
-
-
Pressione (A), depois pressione START e SELECT ao mesmo tempo para iniciar o processo
-
Assim que for concluído e a tela inferior dizer “done.”, saia do b9sTool, depois desligue o seu console
-
-
Você pode ter que forçar o desligamento segurando o botão POWER
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
Se você ver a tela de configuração do Luma, desligue o console e continue para a próxima seção
-
-
-
-
-
Seção VI - Configuração do Luma3DS
-
-
-
Aperte e segure (Select) e enquanto segura (Select), ligue seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
-
-
-
Seção VII - Restaurando as Configurações de Conexão DS
-
-
Nesta seção, você irá restaurar as Configurações de Conexão Nintendo DS da forma que ela estava antes de ela ser temporariamente substituída pelo Flipnote Studio em uma seção anterior.
-
-
-
Navegue até Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare no seu cartão SD
-
Copie o arquivo 42383841.bin da pasta clean do arquivo DSiWare baixado (output_(nome).zip) para a pasta Nintendo DSiWare, substituindo a pasta existente
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
Abra as Configurações do Sistema no seu console
-
Navegue para Gerenciamento de dados -> DSiWare -> Cartão SD (imagem)
Para instalar o boot9strap no seu console, nós derivamos a chave de criptografia exclusiva do seu console. Para fazer isso, usamos uma ferramenta chamada Seedminer para calcular a chave de criptografia de dados (movable.sed) para o seu console.
-
-
Uma vez que temos movable.sed, podemos editar os dados do cartão SD do jogo Mario Kart 7 para instalar menuhax67, que nos permitirá ter acesso ao Homebrew Launcher.
-
-
Assim que tivermos acesso ao Homebrew Launcher, podemos executar o nimdsphax para instalar o boot9strap.
-
-
Veja aqui para informações sobre Kartminer7, aqui para informações sobre menuhax67 e aqui para informações sobre o nimdsphax.
-
-
-
-
O que é necessário
-
-
-
Uma cópia física ou digital de Mario Kart 7 atualizada para a versão mais recente (v1.2)
-
-
Você pode atualizar Mario Kart 7 a partir do eShop ou seguindo a mensagem de atualização quando você abrir o jogo
-
-
-
Um computador executando Windows, macOS ou Linux
-
Seu arquivo movable.sed de completar Seedminer
-
A versão mais recente do Kartminer7 (o lançamento marcado WINDOWS se você tiver um computador Windows, ou o lançamento marcado LINUX-macOS se você tiver um computador com macOS ou baseado em Linux)
-
A versão mais recente do boot9strap (download direto)
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
-
-
-
Seção I - Preparando os dados do Mario Kart 7
-
-
Nesta seção, você fará com que o 3DS gere alguns dados no Mario Kart 7 que serão usados para instalar o exploit em uma seção posterior.
-
-
-
Reinsira o cartão SD no seu console
-
Inicie o Mario Kart 7
-
Toque no botão “Mario Kart Channel” na parte inferior
-
Se você for solicitado, aperte “Next” e “OK” para todos os alertas que você ver
-
Toque no botão “StreetPass List” na parte inferior da tela, no meio
-
Aperte o botão (Home) para suspender o Mario Kart 7
-
Desative as conexões sem fio desligando o interruptor wireless do lado do console ou navegando para as Configurações do Menu HOME (canto superior esquerdo) -> Comunicação sem fio -> OFF
-
Desligue seu console
-
-
-
Seção II - Preparação do Cartão SD
-
-
-
Insira o cartão SD no seu computador
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
-
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
-
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
-
-
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
-
-
-
Copie a pasta nimdsphax do nimdsphax .zip para a pasta /3ds/ no seu cartão SD
-
Copie menuhax67_installer.3dsx do .zip menuhax para a pasta /3ds/ no seu cartão SD
-
Copie o Launcher.dat da pasta para seu modelo e região dentro do .zip do menuhax para a raiz do seu cartão SD
-
Mantenha seu cartão SD inserido no seu computador, como ainda é necessário na próxima seção
-
-
-
-
-
-
-
Seção III - Instalando Kartminer7
-
-
-
Extraia o .zip do Release_BETA_mk7 para algum lugar no seu computador (por exemplo, sua área de trabalho)
-
Copie seu arquivo movable.sed para a pasta resources da pasta Release_BETA_mk7
-
-
Certifique-se de que o arquivo tem o nome exato de movable.sed
-
-
-
Abra a pasta backup dentro da pasta Release_BETA_mk7
-
Clique duas vezes no arquivo BACKUP correspondente à região do seu console (por exemplo, backup_USA se você tiver uma cópia dos EUA de Mario Kart 7)
-
-
Se você não tem certeza da região do seu console, você pode verificar nas Configurações do Sistema. U = EUA; E = EUR, J = JPN
-
Se você receber uma mensagem do Windows Defender, clique em “Mais informações”, “Executar mesmo assim” e pressione qualquer tecla para continuar
-
Se o backup foi bem-sucedido, você verá uma nova pasta aparecer
-
Se você deseja restaurar estes dados em uma data posterior (depois de terminar este guia), insira seu cartão SD e clique duas vezes no arquivo RESTORE correspondente à região do seu console
-
-
-
Volte para a pasta Release_BETA_mk7, depois clique duas vezes no arquivo correspondente à região do seu console (por exemplo, EUA se você tiver uma cópia dos EUA de Mario Kart 7)
-
Reinsira o cartão SD no seu console
-
-
-
Seção IV - Kartminer7
-
-
-
Ligue o seu console
-
Inicie o Mario Kart 7
-
Toque no botão “Mario Kart Channel” na parte inferior
-
Toque no botão “StreetPass List” na parte inferior da tela, no meio
-
Aperte (A) várias vezes
-
-
Você deve ver eventualmente o prompt “Start Race?”, então as cores na parte inferior da tela devem mudar de vermelho, para azul, para branco
-
Se você ver as telas vermelho/azul/branco mas o 3DS ter um crash, reinicie e tente novamente
-
Se você não vê QUAISQUER cores, mude o idioma do seu sistema (se possível), então tente o exploit novamente
-
-
-
Se o exploit foi bem sucedido, o 3DS de destino terá sido inicializado no 3DS ROP xPloit Injector
-
-
-
Seção V - Instalando menuhax67
-
-
-
Aperte (Y) + (D-Pad para Baixo) para instalar menuhax67
-
-
Seu console irá desligar automaticamente
-
-
-
Ligue o seu console
-
Toque no pequeno ícone de configurações do Menu HOME no canto superior esquerdo da tela inferior ()
-
-
Se o console congelar por um tempo e depois acontecer um crash, certifique-se de ter Launcher.dat na raiz do seu cartão SD
-
-
-
Se o exploit foi bem sucedido, seu console irá iniciar no Homebrew Launcher
-
Abra o nimdsphax da lista de homebrews
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
-
Se o seu console congela numa tela vermelha, segure o botão POWER até que ele desligue, em seguida, tente executar o menuhax novamente ligando seu console e tocando no ícone de configurações do Menu HOME
-
-
-
-
-
Seção VI - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
-
-
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
-
-
-
Quando concluído, aperte (A) para reiniciar o seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
Seção VII - Removendo menuhax67
-
-
Nesta seção, você usará o Homebrew Launcher para remover o menuhax67, que permitirá que você acesse a opção Configurações do Menu HOME normalmente.
-
-
-
Abra o aplicativo Download Play ()
-
Aguarde até ver os botões Nintendo 3DS e Nintendo DS
-
Aperte (Gatilho Esquerdo) + (D-pad pra baixo) + (Select) ao mesmo tempo para abrir o menu Rosalina
-
Selecione “Miscellaneous options”
-
Selecione “Switch the hb. title to the current app.”
-
Aperte (B) para continuar
-
Aperte (B) para retornar para o menu principal do Rosalina
-
Aperte (B) para sair do menu do Rosalina
-
Aperte (Home) para suspender o Download Play
-
Pressione o botão “Fechar” na tela inferior para fechar o Download Play
-
Reinicie o aplicativo Download Play
-
Seu console deve inicializar o Homebrew Launcher
-
-
Se o seu console estiver travado na tela de carregamento, você está sem boot.3dsx na raiz do seu cartão SD
-
-
-
Abra o menuhax67_installer da lista de homebrew
-
Selecione REMOVE menuhax67
-
Quando você ver “done.”, aperte (A), depois aperte (A) em “EXIT to menu”
-
-
-
A partir daqui, você pode reativar a comunicação sem fio.
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Nós usamos BannerBomb3 para instalar menuhax67, o que nos permite acessar o Homebrew Launcher. A partir daí, iniciamos o nimdsphax que inicia o SafeB9SInstaller.
-
-
Leia aqui para informações sobre nimdsphax e aqui para informações sobre menuhax67.
A versão mais recente do boot9strap (download direto)
-
A versão mais recente do nimdsphax (download direto)
-
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
-
-
-
Seção I - Preparação
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
-
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
-
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
-
-
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
-
-
-
Copie a pasta nimdsphax do nimdsphax .zip para a pasta /3ds/ no seu cartão SD
-
Reinsira o cartão SD no seu console
-
-
-
-
-
-
-
-
-
Seção II - menuhax67
-
-
Nesta seção você usará o exploit menuhax67 instalado antes para iniciar o nimdsphax, que carregará o SafeB9SInstaller.
-
-
-
Ligue o seu console
-
Toque no pequeno ícone de configurações do Menu HOME no canto superior esquerdo da tela inferior ()
-
-
Se o console congelar por um tempo e depois acontecer um crash, certifique-se de ter Launcher.dat na raiz do seu cartão SD
-
-
-
Se o exploit foi bem sucedido, seu console irá iniciar no Homebrew Launcher
-
Abra o nimdsphax da lista de homebrews
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
-
Se o seu console congela em uma tela vermelha, segure o botão POWER até que ele desligue e tente esta seção novamente
-
-
-
-
-
Seção III - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
-
-
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
-
-
-
Quando concluído, aperte (A) para reiniciar o seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
Seção IV - Removendo menuhax67
-
-
Nesta seção, você ativará o exploit BannerBomb3 uma segunda vez para que você possa desinstalar o exploit menuhax67 que foi instalado na Seção II. Isto permitirá que você use as configurações do Menu HOME normalmente novamente.
-
-
-
Abra as Configurações do Sistema no seu console
-
Navegue para Gerenciamento de dados -> DSiWare -> Cartão SD (imagem)
-
Use os botões direcionais para navegar e pressione o botão (A) para selecionar “Uninstall *hax”
-
-
Seu console irá reiniciar automaticamente
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Navegue até Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare no seu cartão SD
-
Apague F00D43D5.bin da sua pasta Nintendo DSiWare e do seu computador. Esse arquivo não será mais necessário
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este método requer um computador executando Windows, Linux ou macOS. Telefones ou tablets NÃO são suportados atualmente. Se você não tiver acesso a um computador, você precisará usar um exploit alternativo.
+
Este método requer um computador executando Windows, Linux ou macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
Ninjhax2 é um exploit para o jogo “Cubic Ninja” feito por smealum. Esta página usa uma versão atualizada do ninjhax por zoogie chamada ninjhax2-dx, que suporta a versão 11.17.0.
-
-
-
Este método requer uma câmera de 3DS funcional.
-
-
Este processo irá sobrescrever o seu save de Cubic Ninja, se você tiver um.
Se o jogo sair para o Menu HOME, então o exploit foi instalado corretamente
-
-
-
Abra “Cubic Ninja” novamente
-
Seu console terá inicializado o Homebrew Launcher
-
Abra o nimdsphax da lista de homebrews
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
-
Se o seu console congela em uma tela vermelha, segure o botão POWER até que ele desligue e tente esta seção novamente
-
-
-
-
-
Seção III - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
-
-
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
-
-
-
Quando concluído, aperte (A) para reiniciar o seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Nós usamos o petit-compwner para abrir o b9sTool, que instala o boot9strap.
-
-
Veja aqui para obter mais informações sobre o petit-compwner.
-
-
-
-
Você só deve ser capaz de chegar a esta página se você estiver executando a versão 11.17.0. Se você estiver em algum firmware diferente de 11.17.0 ou 11.16.0, PARE ou estas instruções VÃO CAUSAR UM BRICK em outros firmwares!!
-
-
O que é necessário
-
-
-
usuários 11.16.0 ou 11.17.0: A versão 6.1.1 da b9sTool
-
-
Tenha certeza absoluta de que você está em um desses firmware, já que estar em outros firmwares pode levar a um BRICK
-
-
-
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
-
-
-
Seção I - Checando por CFW
-
-
Como uma medida de segurança adicional, realizaremos uma verificação adicional de custom firmware. Isso é porque usar esse método quando custom firmware já está instalado tem o risco de danificar o console (renderizando-o sem métodos de recuperação como ntrboot).
-
-
-
Desligue seu console
-
Segure o botão (Select)
-
Ligue o seu console enquanto ainda segura o botão (Select)
-
Se a verificação foi bem-sucedida, você iniciará no Menu HOME e poderá prosseguir com este guia
-
Desligue seu console
-
-
-
Se você ver um menu de configuração ou o console é imediatamente desligado, você já possui CFW e continuar com estas instruções pode causar um BRICK no seu console! Siga Checando por CFW para atualizar o seu CFW existente.
-
-
Seção II - Preparação
-
-
Nesta seção, você copiará os arquivos necessários para iniciar o b9sTool, que é usado para iniciar o instalador boot9strap (custom firmware).
-
-
-
Insira o cartão SD no seu computador
-
Copie boot.nds (B9STool) do .zip para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
Reinsira o cartão SD no seu console
-
-
Ligue o seu console
-
-
-
-
-
-
Seção III - petit-compwner
-
-
Nesta seção, você vai ler os códigos QR necessários para acionar o exploit petit-compwner.
-
-
-
Abra a última versão do petit-compwner no seu computador
-
No console, inicie o Petit Computer
-
Selecione File Management
-
Selecione Read QR Codes
-
Escaneie cada código QR em ordem, de 1/5 a 5/5
-
Assim que você tenha escaneado todos os códigos QR, saia do File Management
-
Selecione View Gallery
-
Inicie o PWN program
-
Se o exploit foi bem sucedido, seu console irá abrir o b9sTool
-
-
-
Seção IV - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Usando os botões direcionais, mova para “Install boot9strap”
-
-
Se você perder este passo, o sistema irá voltar para o Menu HOME ao invés de instalar o boot9strap e você precisará abrir o DS Download Play e reiniciar essa seção desde o início
-
-
-
Pressione (A), depois pressione START e SELECT ao mesmo tempo para iniciar o processo
-
Assim que for concluído e a tela inferior dizer “done.”, saia do b9sTool, depois desligue o seu console
-
-
Você pode ter que forçar o desligamento segurando o botão POWER
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
Se você ver a tela de configuração do Luma, desligue o console e continue para a próxima seção
-
-
-
-
-
Seção V - Configuração do Luma3DS
-
-
-
Aperte e segure (Select) e enquanto segura (Select), ligue seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este método de usar o Seedminer para exploiting usa seu arquivo movable.sed para fazer um save personalizado para o Pokémon Picross, que pode ser usado para iniciar o Homebrew Launcher.
-
-
-
Esse processo irá sobrescrever seu save de Pokémon Picross, se você tiver um. Se você deseja preservar seus dados do jogo Pokémon Picross, você deve fazer um backup do seu arquivo 00000001.sav antes de substituí-lo.
-
-
O que é necessário
-
-
-
O jogo “Pokémon Picross” instalado no seu console
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
-
Se o seu console congela em uma tela vermelha, segure o botão POWER até que ele desligue e tente esta seção novamente
-
-
-
-
-
Seção III - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
-
-
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
-
-
-
Quando concluído, aperte (A) para reiniciar o seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este conjunto de instruções não suporta a versão japonesa do SmileBASIC. O guia para essa versão pode ser encontrado aqui.
-
-
-Detalhes técnicos (opcional)
-
smilehax-IIe é um exploit para o jogo “SmileBASIC” feito por zoogie, compatível com versões de sistema 9.0.0 até 11.17.0 para consoles de região USA/EUR/JPN.
A versão mais recente do boot9strap (download direto)
-
A versão mais recente do nimdsphax (download direto)
-
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
-
A versão mais recente do HBL otherapps (download direto)
-
-
-
Instruções
-
-
Seção I - Preparação
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
-
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
-
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Copie o otherapp payload para o seu modelo/região/versão do otherapps.zip para a raiz do seu cartão SD, e então renomeie o payload para otherapp.bin
-
-
Não adicione a extensão .bin se você não a vê
-
-
-
Transfira o .wav para sua região do Release_sh2e .zip para um dispositivo que pode reproduzir arquivos .wav, por exemplo, um telefone
-
Copie o .icn petitcom para sua região para a raiz do seu cartão SD
-
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
-
-
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
-
-
-
Copie a pasta nimdsphax do nimdsphax .zip para a pasta /3ds/ no seu cartão SD
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
-
-
-
-
-
-
-
-
Seção II - smilehax
-
-
-
Abra o SmileBASIC
-
-
Atualize o jogo se solicitado
-
-
-
Selecione a opção “Publish/Download Projects”
-
Selecione a opção “Download (Receive) using Public Key”
-
Pressione o botão “Yes”
-
Digite a chave pública “NJEQK3A4” usando o teclado na tela
-
Pressione o botão “Yes” para confirmar o download do PMODEM141
-
Pressione “OK”, depois “Back”, depois “Browse Projects”
-
Selecione PMODEM141, então pressione “Select File”
-
Selecione PMODEM141.PRG, pressione “OK”, então “Sim” para executá-lo
-
Selecione RECEIVE FILE SIMPLEX
-
Prepare o dispositivo que você usa para reproduzir o arquivo .wav
-
Mantenha seu console sobre três centrímetros do dispostivo tocando o arquivo .wav e use um volume razoável (não alto) para reproduzir o .wav
-
Agora selecione 300BPS, e então reproduza o arquivo .wav
-
Quando terminar, pressione “Yes” e então pressione “OK”
-
Pressione o botão START
-
Selecione o arquivo SH2E-xxx.TXT e pressione OK, em seguida “Yes” para executá-lo
-
-
Se você for expulso de volta ao menu, certifique-se de estar usando a versão mais recente do SmileBASIC
-
-
-
Seu console terá inicializado o Homebrew Launcher
-
Abra o nimdsphax da lista de homebrews
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
-
Se o seu console congela em uma tela vermelha, segure o botão POWER até que ele desligue e tente esta seção novamente
-
-
-
-
-
Seção III - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
-
-
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
-
-
-
Quando concluído, aperte (A) para reiniciar o seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este conjunto de instruções não tem suporte a versão EUA nem a versão EUR do SmileBASIC. O guia para essas versões pode ser encontrado aqui.
-
-
-Detalhes técnicos (opcional)
-
smilehax-IIe é um exploit para o jogo “SmileBASIC” feito por zoogie, compatível com versões de sistema 9.0.0 até 11.17.0 para consoles de região USA/EUR/JPN.
A versão mais recente do boot9strap (download direto)
-
A versão mais recente do nimdsphax (download direto)
-
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
-
A versão mais recente do HBL otherapps (download direto)
-
-
-
Instruções
-
-
Seção I - Preparação
-
-
Certifique-se de que o SmileBASIC está atualizado para versão mais recente
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
-
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
-
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Copie new3ds_JPN.bin ou old3ds_JPN.bin (dependendo do seu modelo) de otherapps_with_CfgS_11.17.zip para a raiz do seu cartão SD e, em seguida, renomeie o payload para otherapp.bin
-
-
Não adicione a extensão .bin se você não a vê
-
-
-
Transfira SH2E-JPN.300.wav do .zip Release_sh2e para um dispositivo que pode reproduzir arquivos .wav, por exemplo um telefone
-
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
-
-
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
-
-
-
Copie a pasta nimdsphax do nimdsphax .zip para a pasta /3ds/ no seu cartão SD
-
Navegue até Nintendo 3DS -> <ID0>-> ` -> `title` -> `0004000e`
-
Renomeie a pasta 00117200 para _00117200
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
-
-
-
-
-
-
-
-
Seção II - smilehax
-
-
-
Abra o SmileBASIC
-
-
NÃO atualize o jogo se solicitado
-
-
-
Selecione a opção “Publish/Download Projects”
-
Selecione a opção “Download (Receive) using Public Key”
-
Pressione o botão “Yes”
-
Digite a chave pública “NJEQK3A4” usando o teclado na tela
-
Pressione o botão “Yes” para confirmar o download do PMODEM141
-
Pressione “OK”, depois “Back”, depois “Browse Projects”
-
Selecione PMODEM141, então pressione “Select File”
-
Selecione PMODEM141.PRG, pressione “OK”, então “Sim” para executá-lo
-
Selecione RECEIVE FILE SIMPLEX
-
Prepare o dispositivo que você usa para reproduzir o arquivo .wav
-
Mantenha seu console sobre três centrímetros do dispostivo tocando o arquivo .wav e use um volume razoável (não alto) para reproduzir o .wav
-
Agora selecione 300BPS, e então reproduza o arquivo .wav
-
Quando terminar, pressione “Yes” e então pressione “OK”
-
Pressione o botão START
-
Selecione o arquivo SH2E-JPN.TXT e pressione OK, depois “Yes” para executá-lo
-
Seu console terá inicializado o Homebrew Launcher
-
Abra o nimdsphax da lista de homebrews
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
-
Se o seu console congela em uma tela vermelha, segure o botão POWER até que ele desligue e tente esta seção novamente
-
-
-
-
-
Seção III - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
-
-
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
-
-
-
Quando concluído, aperte (A) para reiniciar o seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Este método de usar o Seedminer para exploiting usa seu movable.sed para escrever um save modificado para Steel Diver: Sub Wars, que pode então ser usado para iniciar o Homebrew Launcher.
-
-
-
Esse processo irá sobrescrever seu save do jogo Steel Diver: Sub Wars, se você tiver um. Se você deseja preservar seu dados de Steel Diver: Sub Wars, você deve fazer um backup de seu arquivo 00000001.sav antes de substituí-lo.
-
-
O que é necessário
-
-
-
O jogo “Steel Diver: Sub Wars” instalado no seu console
-
A versão mais recente do boot9strap (download direto)
-
A versão mais recente do nimdsphax (download direto)
-
A versão mais recente do Luma3DS (o arquivo .zip do Luma3DS)
-
A versão mais recente do HBL otherapps (download direto)
-
-
-
Instruções
-
-
Seção I - Preparação
-
-
Nesta seção, você copiará alguns dos arquivos que serão usados para iniciar o Homebrew Launcher.
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Copie boot.firm e boot.3dsx do .zip do Luma3DS para a raiz do seu cartão SD
-
-
A raiz do cartão SD refere-se ao diretório inicial no seu cartão SD onde você pode ver a pasta Nintendo 3DS, mas não está dentro dela
-
-
-
Crie uma pasta chamada boot9strap na raiz do seu cartão SD
-
Copie o boot9strap.firm e o boot9strap.firm.sha do .zip do boot9strap para a pasta /boot9strap/ no seu cartão SD
-
Copie SafeB9SInstaller.bin do .zip do SafeB9SInstaller para a raiz do seu cartão SD
-
Copie a pasta steelhax do Steelhax-release.zip para a raiz do seu cartão SD
-
Copie o otherapp payload para o seu modelo/região/versão do otherapps_with_CfgS_11.17.zip para a raiz do seu cartão SD, e então renomeie-o para otherapp.bin
-
-
Não adicione a extensão .bin se você não a vê
-
-
-
Crie uma pasta chamada 3ds na raiz do seu cartão SD se ela ainda não existir
-
-
Esta pasta armazena aplicativos homebrew e dados; é diferente da pasta Nintendo 3DS que o console gera automaticamente
-
-
-
Copie a pasta nimdsphax do nimdsphax .zip para a pasta /3ds/ no seu cartão SD
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
-
-
-
-
-
-
-
-
Seção II - Steelminer
-
-
Nesta seção, você criará um arquivo de save para o Steel Diver: Sub Wars que, quando usado, carregará o Homebrew Launcher em seu console.
-
-
-
Abra “Steel Diver: Sub Wars” uma vez e selecione um Mii para inicializar seu save
-
-
Recuse a atualização do jogo quando for pedido
-
Se você já atualizou o jogo, use o menu do Gerenciamento de Dados nas Configurações do Console para deletar o update
Navegue até Nintendo 3DS -> <ID0>-> ->` -> `title` -> `00040000` -> `0017c100` -> `data` em seu cartão SD
-
-
Região EUR: 000d7e00
-
Região JPN: 000d7c00
-
Região USA: 000d7d00
-
-
-
Copie o arquivo 00000001.sav recém-baixado para a pasta data no seu cartão SD
-
-
Sobrescreva o arquivo de save antigo quando solicitado
-
-
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
Abra “Steel Diver: Sub Wars”
-
Seu console terá inicializado o Homebrew Launcher
-
Abra o nimdsphax da lista de homebrews
-
Se o exploit for bem-sucedido, você terá entrado no SafeB9SInstaller
-
-
Se o seu console congela em uma tela vermelha, segure o botão POWER até que ele desligue e tente esta seção novamente
-
-
-
-
-
Seção III - Instalando o boot9strap
-
-
Nesta seção, você instalará custom firmware no seu console.
-
-
-
Quando solicitado, aperte a sequência de botões fornecida na tela superior para instalar o boot9strap
-
-
Se um passo na tela inferior tiver texto de cor vermelha e você não for solicitado a introduzir um combo de botões, siga este guia de solução de problemas
-
-
-
Quando concluído, aperte (A) para reiniciar o seu console
-
Seu console deve ter inicializado o menu de configuração do Luma3DS
-
-
O menu de configuração do Luma3DS são configurações para o custom firmware do Luma3DS. Muitas dessas configurações podem ser úteis para personalização ou depuração
-
Para o propósito deste guia, deixe essas opções nas configurações padrão (não marque ou desmarque nada)
-
Se o seu console desligar quando você tentar ligá-lo, certifique-se de que você copiou boot.firm do .zip do Luma3DS para a raiz do seu cartão SD
-
-
-
Aperte (Start) para salvar e reiniciar
-
-
-
A partir deste momento, o seu console iniciará no Luma3DS por padrão.
-
-
O Luma3DS não é diferente do HOME Menu normal. Se seu console foi inicializado no Menu HOME, ele está executando custom firmware.
-
Na próxima página, você irá instalar aplicativos homebrew úteis para concluir sua instalação.
Se o seu console estiver executando Luma 10.2.1 ou superior, a atualização é 100% segura. Você pode verificar a sua versão do Luma segurando (Select) enquanto inicializa o seu console.
Se o seu console estiver em uma versão do Luma mais antiga, você deve atualizar o Luma antes de atualizar o seu console para 11.17.0.
-
Se o seu console ainda não tem custom firmware, NÃO atualize para a versão mais recente a menos que este guia o instrua. Os métodos em firmwares mais antigos são mais fáceis e mais estáveis.
-
Se o seu console não modificado JÁ ESTIVER na versão 11.17.0, este guia foi atualizado em conformidade. Ambos New3DS e Old3DS agora tem métodos de software gratuitos que (na maior parte) não requer nenhum hardware ou software externo.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Se esta for sua primeira vez modificando um 3DS (ou você não é familiarizado com tecnologia), continue lendo! Caso contrário, se você tiver experiência prévia e souber o que está fazendo, volte para Começando.
Para instalar o boot9strap no seu console, nós derivamos a chave de criptografia exclusiva do seu console. Para fazer isso, usamos uma ferramenta chamada Seedminer para calcular a chave de criptografia de dados (movable.sed) para o seu console.
-
-
Para mais informações sobre como Seedminer funciona, veja esta apresentação.
-
-
Esse método usufrui de uma poderosa placa de vídeo para realizar os cálculos necessários. Um website voluntário é utilizado com o propósito de te ajudar com esse método.
-
-
-
-
Seção I - Preparação
-
-
Nesta seção, você receberá os detalhes necessários no seu 3DS que são necessários para descobrir a chave de criptografia do seu console.
-
-
-
Antes de seguir esta seção:
-
-
Certifique-se de que você ligou o seu console com o cartão SD inserido pelo menos uma vez para gerar os dados necessários
-
Certifique-se de que o console esteja conectado à Internet (você deve ver um indicador azul de “internet” no canto superior esquerdo da tela HOME)
-
-
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Vá até a pasta Nintendo 3DS no seu cartão SD
-
Copie o nome da pasta de 32 letras que você vê diretamente dentro de Nintendo 3DS
-
-
Este nome de 32 letras é específico do sistema e será diferente para cada console
Você pode ignorar a pasta private se ela está presente
-
-
-
-
-
Cole o nome da sua pasta de 32 letras em um documento que você possa referenciar mais tarde
-
-
Esta pasta é conhecida como seu “ID0”. Tome nota disso já que este guia irá referir-se a ele como tal mais tarde
-
-
-
Ligue o seu console
-
-
Seu cartão SD não precisa ser inserido neste momento
-
-
-
Vá para sua lista de amigos (o ícone de rosto laranja na linha superior do seu Menu HOME)
-
-
Se você receber um erro e for expulso do menu, você deve criar um novo Mii ou o seu console não consegue se conectar aos servidores da Nintendo (devido a um banimento ou problemas de conexão)
-
-
-
Vá até o perfil do seu Mii e então encontre o seu Código de Amigo na tela superior
-
-
-
Seção II - Seedminer
-
-
Nesta seção, você usará o site Bruteforce Movable para conseguir a chave de criptografia do seu console na forma de movable.sed.
Se o site não estiver funcionando, entre no Discord do Nintendo Homebrew e pergunte (em Inglês) para alguém lá te ajudar
-
-
-
Insira o Friend Code do seu console (sem espaços ou traços) na aba “Your friend code”
-
Cole o nome da pasta de 32 caracteres do seu console no campo “Your ID0”
-
-
Não tente inserir o ID0 manualmente, já que é fácil cometer um erro. Assegure-se de que o seu ID0 esteja inserido corretamente copiando-o e colando-o de onde você o salvou na seção anterior
-
-
-
Selecione “Go”
-
-
Se o site ir imediatamente para a “Step 4”, o site já processou corretamente sua solicitação de bruteforce. Você pode baixar o seu arquivo movable.sed e continuar para a próxima seção. Você não precisa (re)adicionar o bot
-
-
-
Use o botão “Register Friend” no seu console para adicionar o Friend Code do bot conforme dado pelo site
-
-
Se for solicitado, o nome que você dá ao amigo não importa
-
-
-
Espere que o site atualize
-
-
Se não atualizar, espere mais alguns minutos antes de recarregar a página
-
-
-
Assim que o site processar suas informações, o site continuará para Step 2: Bruteforce automaticamente
-
Aguarde a finalização do restante do processo
-
-
Isto é geralmente rápido (1-5 minutos)
-
Durante esse processo, o bot que você adicionou poderá não aparecer no seu 3DS. Enquanto o site atualizar, isso não é um problema
-
Se você ainda está esperando após o período de meia hora, entre no Discord do Nintendo Homebrew e pergunte (em Inglês) para alguém te ajudar
Quando o processo for concluído, baixe seu arquivo movable.sed do site
-
-
Guarde esse arquivo em um lugar seguro pois você precisará dele nas páginas seguintes
-
-
-
Desligue seu console
-
-
-
-
-
Próximos passos
-
-
Selecione o método baseado no aplicativo que você instalou no seu 3DS. Não importa qual método você escolher, o resultado final será o mesmo.
-
-
Mario Kart 7
-
-
Este método utiliza uma cópia digital ou cartucho de Mario Kart 7. Usando o arquivo movable.sed, você pode criar dados de cartão SD para o Mario Kart 7 que lhe darão acesso ao Homebrew Launcher, que será usado para exploiting.
Se você possui qualquer aplicativo DSiWare no seu 3DS, você pode fazer um dump do mesmo no cartão SD para que ele possa ser usado para injetar temporariamente Flipnote nas Configurações de Conexão DS.
Este método usa o jogo Pokémon Picross, que foi um jogo gratuito para jogar. Usando o arquivo movable.sed, você pode criar um arquivo de save modificado que lhe dará acesso ao Homebrew Launcher, que será usado para exploiting.
Este método usa o jogo Steel Diver: Sub Wars, que foi um jogo gratuito para jogar. Usando o arquivo movable.sed, você pode criar um arquivo de save modificado que lhe dará acesso ao Homebrew Launcher, que será usado para exploiting.
Esse método requer uma GPU razoavelmente poderosa (qualquer placa de vídeo dedicada feita nos últimos anos) e a capacidade de usar uma linha de comando. Se você não sabe isso é ou não têm o hardware necessário, junte-se à Nintendo Homebrew no Discord, abra o canal “#mii-mining-assistance” e forneça o seguinte:
-
-
O código QR do seu Mii, enviado diretamente para o Discord (não tire uma captura de tela ou uma foto da imagem, basta enviar a imagem HNI_XXXX.JPG)
-
O ID0 do seu console (o nome da pasta de 32 caracteres diretamente dentro de Nintendo 3DS - veja esta seção de troubleshooting se você tiver vários)
-
O modelo do seu console (ex: 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
Ano de fabricação do seu console; se você não souber, não diga - não é super importante
-
-
-
-
-Detalhes técnicos (opcional)
-
-
Para instalar o boot9strap no seu console, nós derivamos a chave de criptografia exclusiva do seu console. Para fazer isso, usamos uma ferramenta chamada Seedminer para calcular a chave de criptografia de dados (movable.sed) para o seu console.
-
-
Como não temos acesso à Lista de Amigos, nós estamos derivando a primeira parte do movable.sed usando um código QR de um Mii em vez de executar uma troca de amigos de dois sentidos.
-
-
Para mais informações sobre como Seedminer funciona, veja esta apresentação.
-
-
-
-
Instruções
-
-
Se você estiver no Linux ou macOS, substitua py -3 por python3 em todos os comandos.
-
-
O que você precisa
-
-
-
A versão mais recente do Seedminer (o Seedminer .zip)
Se você estiver no Linux, você provavelmente já tem Python 3. Verifique abrindo um terminal e digitando python3 -V. Se este retornar um número de versão, ele funcionará para este guia.
-
-
-
-
-
Seção I - Preparação
-
-
Nesta seção, você vai configurar o Seedminer e obter os arquivos do seu console que são necessários para mining.
-
-
-
Extraia o conteúdo do .zip do Seedminer e mova a pasta com o nome do seu sistema operacional para qualquer lugar do seu computador
-
-
Mantenha esse local de fácil acesso, pois esta pasta Seedminer será onde múltiplos outros arquivos serão colocados
-
-
-
Na pasta Seedminer, segure SHIFT e o botão direito do mouse em qualquer lugar vazio da pasta e, em seguida, clique na opção que abre o Terminal, PowerShell ou Prompt de Comando
-
Na janela de linha de comando, digite py -3 -m pip install pycryptodomex, pressione ENTER, e permita a instalação
-
-
Se este comando falhar com o erro No module named pip, você precisa instalar manualmente o pip. Os métodos para fazer isso podem ser encontrados nesta página.
-
-
-
Ligue o seu console enquanto o cartão SD estiver inserido
-
Abrir o aplicativo do Mii Maker
-
Toque no botão “QR Code/Opções de Imagem”
-
Toque em “Salvar Mii como QR Code”
-
Selecione um Personagem Mii que foi criado neste console, NÃO importado de outro console (faça um novo primeiro se você não tem algum) e pressione “OK”
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Vá até a pasta Nintendo 3DS no seu cartão SD
-
Copie o nome da pasta de 32 letras que você vê diretamente dentro de Nintendo 3DS
-
-
Este nome de 32 letras é específico do sistema e será diferente para cada console
Clique em “Import from…”, então selecione “QR Code” e envie o código QR do seu Mii de antes
-
Clique em “Export to…”, depois selecione “encrypted (.bin)”
-
-
Isto irá baixar um arquivo chamado input.bin
-
-
-
Copie este input.bin para a pasta Seedminer
-
Abra a janela do terminal/PowerShell/Prompt de Comando de antes
-
Dentro desta janela, digite o comando py -3 seedminer_launcher3.py id0 <id0>
-
-
Substitua <id0> pelo ID0 que você copiou para um documento
-
Não inclua os parênteses angulares
-
Não tente inserir o ID0 manualmente, já que é fácil cometer um erro. Assegure-se de que o seu ID0 esteja inserido corretamente copiando-o e colando-o de onde você o salvou na seção anterior
-
-
-
Quando concluído, digite o comando py -3 seedminer_launcher3.py mii <modelo> <ano>
-
-
Substitua <model> pelo modelo do seu console (new ou old) - se você não tiver certeza, apenas modelos com os botões ZL/ZR e C-Stick são “new”
-
Substitua <year> pelo ano em que o 3DS foi feito (Nos consoles Old 3DS, os anos na traseira, (M)2010/(C)2011, são sempre os mesmos e NÃO um indicador) - se não tiver certeza, veja abaixo
-
Anos de fabricação estimados são: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
Você também pode deixar o ano vazio, o que o fará começar no meio
-
O processo de mining geralmente levará até 90 minutos, dependendo da sua sorte e da potência da sua GPU
-
A primeira etapa provavelmente irá maximizar aproximadamente no offset 1500, dependendo do modelo do console
-
Se a segunda fase (depois de ver movable_part2.sed generation success) chega a passar o offset 100, verifique se você inseriu o ID0 correto. Se o seu ID0 estiver correto, você não pode usar este método e precisa atualizar para a versão mais recente e ver se um método não-Seedminer está disponível para você aqui
-
Se você ver a mensagem input.bin is invalid size, faça o input.bin usando seu código QR. Se ainda falhar, abra um navegador diferente e faça o input.bin lá
-
Se você ver a mensagem LFCS has been left blank, use o modelo do console oposto (por exemplo, mii old em vez de mii new)
-
-
-
Quando terminar, um arquivo chamado movable.sed aparecerá na pasta Seedminer
Para instalar o boot9strap no seu console, nós derivamos a chave de criptografia exclusiva do seu console. Para fazer isso, usamos uma ferramenta chamada Seedminer para calcular a chave de criptografia de dados (movable.sed) para o seu console.
-
-
Para mais informações sobre como Seedminer funciona, veja esta apresentação.
-
-
Esse método usufrui de uma poderosa placa de vídeo para realizar os cálculos necessários. Um website voluntário é utilizado com o propósito de te ajudar com esse método.
-
-
-
-
Seção I - Preparação
-
-
Nesta seção, você receberá os detalhes necessários no seu 3DS que são necessários para descobrir a chave de criptografia do seu console.
-
-
-
Antes de seguir esta seção:
-
-
Certifique-se de que você ligou o seu console com o cartão SD inserido pelo menos uma vez para gerar os dados necessários
-
Certifique-se de que o console esteja conectado à Internet (você deve ver um indicador azul de “internet” no canto superior esquerdo da tela HOME)
-
-
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Vá até a pasta Nintendo 3DS no seu cartão SD
-
Copie o nome da pasta de 32 letras que você vê diretamente dentro de Nintendo 3DS
-
-
Este nome de 32 letras é específico do sistema e será diferente para cada console
Você pode ignorar a pasta private se ela está presente
-
-
-
-
-
Cole o nome da sua pasta de 32 letras em um documento que você possa referenciar mais tarde
-
-
Esta pasta é conhecida como seu “ID0”. Tome nota disso já que este guia irá referir-se a ele como tal mais tarde
-
-
-
Ligue o seu console
-
-
Seu cartão SD não precisa ser inserido neste momento
-
-
-
Vá para sua lista de amigos (o ícone de rosto laranja na linha superior do seu Menu HOME)
-
-
Se você receber um erro e for expulso do menu, você deve criar um novo Mii ou o seu console não consegue se conectar aos servidores da Nintendo (devido a um banimento ou problemas de conexão)
-
-
-
Vá até o perfil do seu Mii e então encontre o seu Código de Amigo na tela superior
-
-
-
Seção II - Seedminer
-
-
Nesta seção, você usará o site Bruteforce Movable para conseguir a chave de criptografia do seu console na forma de movable.sed.
Se o site não estiver funcionando, entre no Discord do Nintendo Homebrew e pergunte (em Inglês) para alguém lá te ajudar
-
-
-
Insira o Friend Code do seu console (sem espaços ou traços) na aba “Your friend code”
-
Cole o nome da pasta de 32 caracteres do seu console no campo “Your ID0”
-
-
Não tente inserir o ID0 manualmente, já que é fácil cometer um erro. Assegure-se de que o seu ID0 esteja inserido corretamente copiando-o e colando-o de onde você o salvou na seção anterior
-
-
-
Selecione “Go”
-
-
Se o site ir imediatamente para a “Step 4”, o site já processou corretamente sua solicitação de bruteforce. Você pode baixar o seu arquivo movable.sed e continuar para a próxima seção. Você não precisa (re)adicionar o bot
-
-
-
Use o botão “Register Friend” no seu console para adicionar o Friend Code do bot conforme dado pelo site
-
-
Se for solicitado, o nome que você dá ao amigo não importa
-
-
-
Espere que o site atualize
-
-
Se não atualizar, espere mais alguns minutos antes de recarregar a página
-
-
-
Assim que o site processar suas informações, o site continuará para Step 2: Bruteforce automaticamente
-
Aguarde a finalização do restante do processo
-
-
Isto é geralmente rápido (1-5 minutos)
-
Durante esse processo, o bot que você adicionou poderá não aparecer no seu 3DS. Enquanto o site atualizar, isso não é um problema
-
Se você ainda está esperando após o período de meia hora, entre no Discord do Nintendo Homebrew e pergunte (em Inglês) para alguém te ajudar
Quando o processo for concluído, baixe seu arquivo movable.sed do site
-
-
Guarde esse arquivo em um lugar seguro pois você precisará dele nas páginas seguintes
-
-
-
Desligue seu console
-
-
-
-
-
Próximo passo: BannerBomb3
-
-
Assim que você tiver a chave de encriptação do console (movable.sed), você poderá usá-la em conjunto com o BannerBomb3, que usa seu arquivo movable.sed para aproveitar dos exploits no aplicativo de Configurações do Sistema.
Para instalar o boot9strap no seu console, nós derivamos a chave de criptografia exclusiva do seu console. Para fazer isso, usamos uma ferramenta chamada Seedminer para calcular a chave de criptografia de dados (movable.sed) para o seu console.
-
-
Para mais informações sobre como Seedminer funciona, veja esta apresentação.
-
-
Esse método usufrui de uma poderosa placa de vídeo para realizar os cálculos necessários. Um website voluntário é utilizado com o propósito de te ajudar com esse método.
-
-
-
-
Seção I - Preparação
-
-
Nesta seção, você receberá os detalhes necessários no seu 3DS que são necessários para descobrir a chave de criptografia do seu console.
-
-
-
Antes de seguir esta seção:
-
-
Certifique-se de que você ligou o seu console com o cartão SD inserido pelo menos uma vez para gerar os dados necessários
-
Certifique-se de que o console esteja conectado à Internet (você deve ver um indicador azul de “internet” no canto superior esquerdo da tela HOME)
-
-
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Vá até a pasta Nintendo 3DS no seu cartão SD
-
Copie o nome da pasta de 32 letras que você vê diretamente dentro de Nintendo 3DS
-
-
Este nome de 32 letras é específico do sistema e será diferente para cada console
Você pode ignorar a pasta private se ela está presente
-
-
-
-
-
Cole o nome da sua pasta de 32 letras em um documento que você possa referenciar mais tarde
-
-
Esta pasta é conhecida como seu “ID0”. Tome nota disso já que este guia irá referir-se a ele como tal mais tarde
-
-
-
Ligue o seu console
-
-
Seu cartão SD não precisa ser inserido neste momento
-
-
-
Vá para sua lista de amigos (o ícone de rosto laranja na linha superior do seu Menu HOME)
-
-
Se você receber um erro e for expulso do menu, você deve criar um novo Mii ou o seu console não consegue se conectar aos servidores da Nintendo (devido a um banimento ou problemas de conexão)
-
-
-
Vá até o perfil do seu Mii e então encontre o seu Código de Amigo na tela superior
-
-
-
Seção II - Seedminer
-
-
Nesta seção, você usará o site Bruteforce Movable para conseguir a chave de criptografia do seu console na forma de movable.sed.
Se o site não estiver funcionando, entre no Discord do Nintendo Homebrew e pergunte (em Inglês) para alguém lá te ajudar
-
-
-
Insira o Friend Code do seu console (sem espaços ou traços) na aba “Your friend code”
-
Cole o nome da pasta de 32 caracteres do seu console no campo “Your ID0”
-
-
Não tente inserir o ID0 manualmente, já que é fácil cometer um erro. Assegure-se de que o seu ID0 esteja inserido corretamente copiando-o e colando-o de onde você o salvou na seção anterior
-
-
-
Selecione “Go”
-
-
Se o site ir imediatamente para a “Step 4”, o site já processou corretamente sua solicitação de bruteforce. Você pode baixar o seu arquivo movable.sed e continuar para a próxima seção. Você não precisa (re)adicionar o bot
-
-
-
Use o botão “Register Friend” no seu console para adicionar o Friend Code do bot conforme dado pelo site
-
-
Se for solicitado, o nome que você dá ao amigo não importa
-
-
-
Espere que o site atualize
-
-
Se não atualizar, espere mais alguns minutos antes de recarregar a página
-
-
-
Assim que o site processar suas informações, o site continuará para Step 2: Bruteforce automaticamente
-
Aguarde a finalização do restante do processo
-
-
Isto é geralmente rápido (1-5 minutos)
-
Durante esse processo, o bot que você adicionou poderá não aparecer no seu 3DS. Enquanto o site atualizar, isso não é um problema
-
Se você ainda está esperando após o período de meia hora, entre no Discord do Nintendo Homebrew e pergunte (em Inglês) para alguém te ajudar
Quando o processo for concluído, baixe seu arquivo movable.sed do site
-
-
Guarde esse arquivo em um lugar seguro pois você precisará dele nas páginas seguintes
-
-
-
Desligue seu console
-
-
-
-
-
Próximo passo: BannerBomb3
-
-
Assim que você tiver a chave de encriptação do console (movable.sed), você poderá usá-la em conjunto com o BannerBomb3, que usa seu arquivo movable.sed para aproveitar dos exploits no aplicativo de Configurações do Sistema.
-
-
-Várias pastas de nome longo na pasta Nintendo 3DS
-
-
-
-
Isso ocorre quando você usa o seu cartão SD em vários consoles de 3DS e se destina a evitar a fusão inadvertidamente de dados que não seriam válidos em outros consoes. Para descobrir qual pasta de nome longo é a correta para seu 3DS, siga estas instruções:
-
-
-
Renomeie a pasta Nintendo 3DS para BACKUP_Nintendo 3DS
-
Reinsira o cartão SD no seu console
-
Ligue o seu console
-
Espere o console gerar os dados do cartão SD
-
-
Seus aplicativos terão desaparecido. Isto é normal e será resolvido em breve
-
-
-
Desligue seu console
-
Insira o cartão SD no seu computador
-
Vá até a pasta Nintendo 3DS no seu cartão SD
-
Copie o nome da pasta de 32 caracteres que você vê
-
Renomeie a pasta BACKUP_Nintendo 3DS para Nintendo 3DS
-
-
-
-
-Bruteforce Movable pula para o Step 4
-
-
O site já minerou seu movable.sed usando seu friend code e a combinação do ID0. Você pode usar o movable.sed que ele te fornece.
-
-
-
-Important! You have been locked out of the automated part1 dumper system...
-
-
Seu friend code foi bloqueado de usar o bot porque o seu 3DS falhou em adicionar o bot como amigo. Certifique-se de que seu 3DS esteja conectado à internet corretamente e, em seguida, entre no Discord do Nintendo Homebrew e peça para ser desbloqueado.
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
O site determinou que seu movable.sed não pode ser brute-forced. Certifique-se de que você deu o ID0 correto para o site. Se o seu ID0 estiver correto, então você não poderá usar o Seedminer e precisará usar um método alternativo.
-
-
Usuários do New 3DS podem seguir Instalando boot9strap (superskaterhax), enquanto usuários do 3DS original podem seguir Instalando boot9strap (MSET9). Se você não pode fazer o MSET9 por qualquer motivo, precisará seguir um método que requer jogos ou hardware adicionais.
-
-
-
-
BannerBomb3
-
-
-Múltiplas pastas ID1 dentro de ID0
-
-
-
-
Isso ocorre quando você usa vários cartões SD com o mesmo 3DS e então mescla os conteúdos do cartão SD juntos. Ambos são “válidos”, mas o 3DS só pode ler uma de cada vez.
-
-
Você precisará determinar qual contém seus dados. Em primeiro lugar, faça o backup de todas as pastas, no caso de algo dar errado:
-
-
-
-
Agora, exclua todas as pastas, exceto uma do seu cartão SD. Geralmente, você vai querer excluir a(s) menor(es), já que a que tiver todos os seus dados provavelmente terá mais espaço ocupad. Você pode comparar qual pasta está ocupando mais espaço clicando com o botão direito do mouse e clicando em “Propriedades”:
-
-
-
-
-
-
Seu cartão SD agora deve se parecer com isto:
-
-
-
-
Agora, coloque o seu cartão SD no 3DS e ligue-o. Se seus dados ainda estão lá, você excluiu a pasta certa e agora determinou seu ID1 correto. Se tudo tiver desaparecido, volte para a pasta de backup que você fez anteriormente e tente a outra pasta.
-
-
-
-
-Menu de Gerenciamento de DSiWare mostra um crash sem mostrar o menu multihax do BB3
-
Certifique-se de que F00D43D5.bin seja o único arquivo em Nintendo 3DS -> <ID0> ->` -> `Nintendo DSiWare`. Se for o caso, re-crie-o com o [Bannerbomb3 Injector](https://zoogie.github.io/web/bb3).
-
-
Além disso, certifique-se de que o bb3.bin está na raiz do cartão SD. Caso esteja faltando, baixe a última versão do Bannerbomb3 (download direto) e copie o arquivo bb3.bin do .zip para a raiz do seu cartão SD.
-
-
Se nenhuma destas soluções resolver este problema, então custom firmware pode ter sido desinstalado nesse console de uma forma que torna esse método impossível de executar. Se for esse o caso, junte-se ao Discord do Nintendo Homebrew e peça ajuda, em Inglês.
-
-
-
-O Menu de Gerenciamento DSiWare mostra "Sem data de software acessível".
-
-
F00D43D5.bin está ausente em Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare. Certifique-se de que Nintendo DSiWare esteja corretamente escrito e espaçado. Letras maiúsculas ou minúsculas não importam.
-
-
-
-O Gerenciamento de DSiWare mostra um ponto de interrogação
-
-
Pode haver um problema com o seu arquivo F00D43D5.bin (pode estar corrompido ou destinado ao 3DS errado). Recrie seu arquivo F00D43D5.bin com o Bannerbomb3 Injector, garantindo que você use o arquivo movable.sed para o seu console.
-
-
-
Instalando boot9strap (Fredtool-Inject)
-
-
-Erro na página do DSiHaxInjector
-
-
Certifique-se de que o seu movable.sed e backup de DSiWare venham do mesmo console. Uma incompatibilidade resultará em erro.
-
-
-
-"Haxxxxxxxxx!" não aparece
-
-
Há um problema com seu arquivo 42383821.bin (ele está incorreto, faltando, colocado no lugar errado ou corrompido). Recrie seus arquivos com o site DSIHaxInjector_new e certifique-se de colocar o arquivo 42383821.bin do output.zip -> hax em Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare.
-
-
-
-O DSiWare inicia normalmente
-
-
Haxxxxxxxxxxx! não foi copiado do cartão SD para a memória do sistema.
-
-
-
-O cartão SD está cinza no Flipnote
-
-
O Flipnote pode levar um bom tempo para indexar o seu cartão se você tiver um cartão SD grande. Deixe-o por alguns minutos.
-
-
-
-O Lenny face não aparece na seção do cartão SD
-
-
Você não copiou a pasta private do Frogminer_save .zip para a raiz do seu cartão SD.
-
-
-
-O Flipnote congela
-
-
Você pode ter tocado acidentalmente na tela enquanto estava no Flipnote modificado. Entre novamente nas Conexões Nintendo DS e tente novamente, garantindo que você não use acidentalmente a touchscreen.
-
-
-
-Tela verde após colar
-
-
O arquivo boot.nds está faltando ou está fora do lugar apropriado. Baixe a versão mais recente do b9stool e coloque boot.nds na raiz do seu cartão SD, substituindo o existente.
-
-
-
-Tela branca após colar
-
Há um problema com o seu arquivo boot.nds. Baixe novamente a versão mais recente do b9stool e coloque boot.nds na raiz do seu cartão SD, substituindo o existente.
-
-
-
-Não é possível abrir o menu de configuração do Luma3DS depois de executar B9STool
-
-
-
-
-"Ocorreu um erro. Segure o botão POWER para desligar..." (tela preta com texto)
-
-
Seus arquivos 00000001.sav e/ou otherapp.bin podem estar fora do local apropriado. Certifique-se de que 00000001.sav está em Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data e que otherapp. em está na raiz do seu cartão SD.
-
-
Se seus arquivos estiverem nos locais corretos, re-crie o save usando a PicHaxx Save Tool, então coloque-o em Nintendo 3DS -> <ID0> ->` -> `title` -> `00040000` -> `0017c100` -> `data`. Certifique-se de que o arquivo tem exatamente o nome de `00000001.sav` e que você usou o `movable.sed` do seu console para criá-lo. Rebaixe [HBL otherapps](https://github.com/zoogie/ninjhax2.x/releases/download/v11.17/otherapps_with_CfgS_11.17.zip), coloque o arquivo `.bin` relevante ao seu console na raiz do seu cartão SD e renomeie-o para `otherapp.bin`. Não adicione a extensão `.bin` se você não a vê.
-
-
-
-"An exception occurred" ou Errdisp quando abro o Picross
-
-
Seu console já possui custom firmware. Você deve checar por CFW.
-
-
-
-"Um erro ocorreu, forçando o fechamento do software..." (caixa de mensagens branca)
-
-
Há um problema com seu arquivo otherapp.bin. Baixe HBL otherapps, coloque o arquivo .bin relevante para o seu console na raiz do seu cartão SD e renomeie-o para otherapp.bin. Não adicione a extensão .bin se você não a vê.
-
-
-
-O jogo começa normalmente
-
-
Seu arquivo 00000001.sav modificado pode estar fora do local apropriado, ou você pode ter usado o movable.sed errado ao criá-lo. Regere seu movable.sed a partir do Bruteforce Movable, e re-crie o save usando a PicHaxx Save Tool e coloque o arquivo resultante (00000001.sav) em Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.
-
-
-Tela vermelha/roxa/roxa e branca após executar o Browserhax
-
-
Isso provavelmente indica que você já possui custom firmware. Você deve checar por CFW.
-
-
-
-"Ocorreu um erro. Segure o botão POWER para desligar..." (tela preta com texto)
-
-
O arquivo arm11code.bin está faltando ou está deslocado. Baixe a última versão do universal-otherapp, coloque otherapp.bin na raiz do seu cartão SD e renomeie-o para arm11code.bin. Não adicione a extensão .bin se você não a vê.
-
-
-
-"Um erro ocorreu, forçando o fechamento do software..." (caixa de mensagens branca)
-
-
Pode haver um problema com o seu arquivo arm11code.bin. Baixe a última versão do universal-otherapp, coloque otherapp.bin na raiz do seu cartão SD e renomeie-o para arm11code.bin. Não adicione a extensão .bin se você não a vê.
-
-
Você também pode tentar redefinir seus dados salvos do navegador:
-
-
-
Inicie o navegador, e então abra as configurações do navegador
-
Role até a parte inferior e selecione “Redefinir Dados Salvos” (também pode ser chamado de “Inicializar Dados Salvos” ou “Limpar Todos os Dados Salvos”)
-
Tente o exploit novamente
-
-
-
-
-
-Abrindo o código QR ou URL do browserhax causa um crash
-
-
Exploits de navegador (como este) são muitas vezes instáveis e caem com frequência, mas em alguns casos eles podem ser consertados seguindo as seguintes etapas.
-
-
-
Inicie o navegador, e então abra as configurações do navegador
-
Role até a parte inferior e selecione “Redefinir Dados Salvos” (também pode ser chamado de “Inicializar Dados Salvos” ou “Limpar Todos os Dados Salvos”)
-
Tente o exploit novamente
-
-
-
-
-Pedido para atualizar o sistema ao abrir o navegador
-
-
O proxy SSLoth está configurado incorretamente. Refaça a seção SSLoth na página.
-
-
-
-Erro 032-0420 ao abrir o navegador
-
-
Siga estes passos em ordem:
-
-
-
Abra as Configurações do Sistema no seu console
-
Navegue para Configurações da Internet -> Configurações de Conexão
-
Clique no seu slot de conexão da rede e navegue para Alterar configurações -> Próxima página (seta direita) -> Configurações de proxy
-
Defina “Configurações de proxy” para “Não”
-
Clique em OK, e depois clique em Salvar
-
Quando solicitado, clique em “Testar” para executar o teste de conexão
-
-
O teste deve ser bem-sucedido
-
-
-
Clique em “OK” para continuar
-
Pressione “Voltar” duas vezes e, em seguida, “Fechar” para voltar ao Menu HOME
-
Abra o Navegador Internet
-
Se for solicitado sobre uma atualização de sistema, pressione OK
-
Pode haver um problema com o seu arquivo arm11code.bin. Baixe novamente a versão mais recente do universal-otherapp, coloque-o na raiz do seu cartão SD e renomeie-o para arm11code.bin. Não adicione a extensão .bin se você não a vê.
-
-
-
-"PrepareArm9ForTwl returned error c8804631!"
-
-
Faça o backup de seus dados e formate novamente seu cartão SD como FAT32 com a ferramenta recomendada dependendo do seu sistema operacional (Windows, macOS, Linux). MiniTool Partition Wizard e a ferramenta de formatação da HP (HPUSBDisk) são conhecidas por causar problemas com cartões SD para 3DS.
-
-
Se isso falhar, tente usar outro cartão SD.
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-"Ocorreu um erro. Salve seus dados em qualquer software atualmente em uso e reinicie o sistema."
-
-
A data está definida incorretamente. Para defini-la corretamente, siga estas etapas:
-
-
-
Selecione o ícone de Configuração do Sistema no Menu HOME, e toque em Abrir.
-
Toque em Outras Configurações.
-
Toque em Data e Hora.
-
Toque na data de hoje.
-
Use as setas para cima/baixo para definir o dia, mês e ano correto.
-
Selecione OK para confirmar.
-
-
-
Se o problema persistir:
-
-
-
Certifique-se de que o arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, e boot.3dsx estão na raiz do cartão SD (não dentro de nenhuma pasta)
-
Certifique-se de que você selecionou o payload correto para a sua região E versão do sistema
-
Certifique-se de que suas configurações de região se pareçam com isso
-
Tente redefinir os dados do seu navegador:
-
-
Inicie o navegador, e então abra as configurações do navegador
-
Role até a parte inferior e selecione “Redefinir os dados salvos” (também pode ser chamado de “Inicializar Dados Salvos” ou “Limpar todos os dados salvos”)
-
Tente o exploit novamente
-
-
-
Tente alterar o idioma do sistema para algo diferente do idioma atual
-
-
-
-
-
-"Ocorreu um erro. Segure o botão POWER para desligar..." (tela preta com texto)
-
-
O arquivo arm11code.bin está faltando ou está deslocado. Certifique-se de copiar os arquivos da versão mais recente do super-skaterhax para sua região e versão para a raiz do seu cartão SD (não dentro de uma pasta).
-
-
-
-
-
-
-An exception occured ou "DLL_HEAP_INFORMATION" após pressionar GO! GO!
-
-
Isso provavelmente indica que você já possui custom firmware. Você deve checar por CFW.
Se o layout do seu cartão SD estiver correto, então provavelmente o cartão SD não está sendo lido pelo console. Reformate-o (Windows, Linux, e então comece novamente do início da Seção I.
+
Se o layout do seu cartão SD estiver correto, então provavelmente o cartão SD não está sendo lido pelo console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -979,6 +571,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1078,7 +679,7 @@ window.cookieconsent.initialise({
Talvez você esteja sem o SafeB9S.bin na raiz do seu cartão SD, ou o arquivo pode estar corrompido. Copie-o do .zip do MSET9, substituindo quaisquer arquivos existentes.
-
Alternativamente, seu cartão SD pode estar sem a formatação apropriada ou mal particionado. Tente reformatar seu cartão SD: Windows, Linux(isto irá apagar seus dados do cartão SD)
+
Alternativamente, seu cartão SD pode estar sem a formatação apropriada ou mal particionado. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
+
+
+"Ocorreu um erro. Salve seus dados em qualquer software atualmente em uso e reinicie o sistema."
+
+
A data está definida incorretamente. Para defini-la corretamente, siga estas etapas:
+
+
+
Selecione o ícone de Configuração do Sistema no Menu HOME, e toque em Abrir.
+
Toque em Outras Configurações.
+
Toque em Data e Hora.
+
Toque na data de hoje.
+
Use as setas para cima/baixo para definir o dia, mês e ano correto.
+
Selecione OK para confirmar.
+
+
+
Se o problema persistir:
+
+
+
Certifique-se de que o arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, e boot.3dsx estão na raiz do cartão SD (não dentro de nenhuma pasta)
+
Certifique-se de que você selecionou o payload correto para a sua região E versão do sistema
+
Certifique-se de que suas configurações de região se pareçam com isso
+
Tente redefinir os dados do seu navegador:
+
+
Inicie o navegador, e então abra as configurações do navegador
+
Role até a parte inferior e selecione “Redefinir os dados salvos” (também pode ser chamado de “Inicializar Dados Salvos” ou “Limpar todos os dados salvos”)
+
Tente o exploit novamente
+
+
+
Tente alterar o idioma do sistema para algo diferente do idioma atual
+
+
+
+
+
+"Ocorreu um erro. Segure o botão POWER para desligar..." (tela preta com texto)
+
+
O arquivo arm11code.bin está faltando ou está deslocado. Certifique-se de copiar os arquivos da versão mais recente do super-skaterhax para sua região e versão para a raiz do seu cartão SD (não dentro de uma pasta).
+
+
+
+
+
+
+An exception occured ou "DLL_HEAP_INFORMATION" após pressionar GO! GO!
+
+
Isso provavelmente indica que você já possui custom firmware. Você deve checar por CFW.
+
+
+
+
Instalando boot9strap (SSLoth-Browser)
+
+
+Tela vermelha/roxa/roxa e branca após executar o Browserhax
+
+
Isso provavelmente indica que você já possui custom firmware. Você deve checar por CFW.
+
+
+
+"Ocorreu um erro. Segure o botão POWER para desligar..." (tela preta com texto)
+
+
O arquivo arm11code.bin está faltando ou está deslocado. Baixe a última versão do universal-otherapp, coloque otherapp.bin na raiz do seu cartão SD e renomeie-o para arm11code.bin. Não adicione a extensão .bin se você não a vê.
+
+
+
+"Um erro ocorreu, forçando o fechamento do software..." (caixa de mensagens branca)
+
+
Pode haver um problema com o seu arquivo arm11code.bin. Baixe a última versão do universal-otherapp, coloque otherapp.bin na raiz do seu cartão SD e renomeie-o para arm11code.bin. Não adicione a extensão .bin se você não a vê.
+
+
Você também pode tentar redefinir seus dados salvos do navegador:
+
+
+
Inicie o navegador, e então abra as configurações do navegador
+
Role até a parte inferior e selecione “Redefinir Dados Salvos” (também pode ser chamado de “Inicializar Dados Salvos” ou “Limpar Todos os Dados Salvos”)
+
Tente o exploit novamente
+
+
+
+
+
+Abrindo o código QR ou URL do browserhax causa um crash
+
+
Exploits de navegador (como este) são muitas vezes instáveis e caem com frequência, mas em alguns casos eles podem ser consertados seguindo as seguintes etapas.
+
+
+
Inicie o navegador, e então abra as configurações do navegador
+
Role até a parte inferior e selecione “Redefinir Dados Salvos” (também pode ser chamado de “Inicializar Dados Salvos” ou “Limpar Todos os Dados Salvos”)
+
Tente o exploit novamente
+
+
+
+
+Pedido para atualizar o sistema ao abrir o navegador
+
+
O proxy SSLoth está configurado incorretamente. Refaça a seção SSLoth na página.
+
+
+
+Erro 032-0420 ao abrir o navegador
+
+
Siga estes passos em ordem:
+
+
+
Abra as Configurações do Sistema no seu console
+
Navegue para Configurações da Internet -> Configurações de Conexão
+
Clique no seu slot de conexão da rede e navegue para Alterar configurações -> Próxima página (seta direita) -> Configurações de proxy
+
Defina “Configurações de proxy” para “Não”
+
Clique em OK, e depois clique em Salvar
+
Quando solicitado, clique em “Testar” para executar o teste de conexão
+
+
O teste deve ser bem-sucedido
+
+
+
Clique em “OK” para continuar
+
Pressione “Voltar” duas vezes e, em seguida, “Fechar” para voltar ao Menu HOME
+
Abra o Navegador Internet
+
Se for solicitado sobre uma atualização de sistema, pressione OK
+
Pode haver um problema com o seu arquivo arm11code.bin. Baixe novamente a versão mais recente do universal-otherapp, coloque-o na raiz do seu cartão SD e renomeie-o para arm11code.bin. Não adicione a extensão .bin se você não a vê.
+
+
+
+"PrepareArm9ForTwl returned error c8804631!"
+
+
Faça o backup de seus dados e formate novamente seu cartão SD como FAT32 com a ferramenta recomendada dependendo do seu sistema operacional (Windows, macOS, Linux). MiniTool Partition Wizard e a ferramenta de formatação da HP (HPUSBDisk) são conhecidas por causar problemas com cartões SD para 3DS.
Para usar o exploit Seedminer, você deve atualizar o seu console para a versão mais recente do sistema.
-
-
O que você precisa
-
-
-
Uma conexão com a internet no seu console
-
-
-
Seção I - Atualizando o Sistema
-
-
-
Atualize seu console indo em Configurações do Sistema, depois em “Outras Configurações”, depois indo até a direita e usando “Atualização do Sistema”
-
-
O atualizador pode exibir uma mensagem dizendo “Seu sistema está atualizado” ao invés de atualizar. Isso é normal se você já está atualizado; continue para a próxima seção
-
Se isso lhe der um erro, defina suas configurações de DNS e configurações de Proxy para “Automático”
Para usar o exploit super-skaterhax, você deve atualizar o seu console para a versão mais recente do sistema.
-
-
O que você precisa
-
-
-
Uma conexão com a internet no seu console
-
-
-
Seção I - Atualizando o Sistema
-
-
-
Atualize seu console indo em Configurações do Sistema, depois em “Outras Configurações”, depois indo até a direita e usando “Atualização do Sistema”
-
-
O atualizador pode exibir uma mensagem dizendo “Seu sistema está atualizado” ao invés de atualizar. Isso é normal se você já está atualizado; continue para a próxima seção
-
Se isso lhe der um erro, defina suas configurações de DNS e configurações de Proxy para “Automático”
Para utilizar o exploit MSET9, você deve atualizar seu console para a versão mais recente.
-
-
O que você precisa
-
-
-
Uma conexão com a internet no seu console
-
-
-
Seção I - Atualizando o Sistema
-
-
-
Atualize seu console indo em Configurações do Sistema, depois em “Outras Configurações”, depois indo até a direita e usando “Atualização do Sistema”
-
-
O atualizador pode exibir uma mensagem dizendo “Seu sistema está atualizado” ao invés de atualizar. Isso é normal se você já está atualizado; continue para a próxima seção
-
Se isso lhe der um erro, defina suas configurações de DNS e configurações de Proxy para “Automático”
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
-
-
Installed eShop titles
-
-
Because Nintendo eShop no longer allows purchases, it is no longer possible to purchase new titles. However, you can re-download a title if you had purchased or downloaded them before purchases stopped being possible.
-
-
Any one of the following titles can be used in conjunction with Seedminer to install custom firmware:
-
-
Mario Kart 7 (common preinstalled title; a physical cartridge also works)
-
Pokémon Picross (free-to-play; digital only)
-
Steel Diver: Sub Wars (free-to-play; digital only)
This method requires a compatible DS flashcart to be flashed with ntrboot, which works on all 3DS-family consoles regardless of model or region.
-
-
If none of the above options are available to you, this is the cheapest available option. If you don’t already have a compatible cartridge, a preflashed ntrboot-compatible cartridge can be purchased here for roughly $20 USD.
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
在 <ID1> 文件夹内创建一个名为 Nintendo DSiWare 的文件夹
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
从中复制出你在 DSiWare 数据管理第二页中看到的与标号相同的文件，然后复制到 Nintendo DSiWare 文件夹。如有提示请选覆盖。
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
稍等一下
-
-
The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the console showing an error message and rebooting
-
如果下屏没有变紫，则代表之前的步骤可能做错了
-
-
-
现在 SD 卡上的根目录会多出一个 42383821.bin 文件
-
打开内存卡的 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 文件夹
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
If you would prefer a visual guide to this section, one is available here.
-
-
-
退出系统设置
-
Launch Download Play on your console (the orange icon with a 3DS on it)
-
选择 “Nintendo DS”
-
如果漏洞执行成功，你的主机将进入到日版的“うごくメモ帳（Flipnote Studio）”
-
Complete the initial setup process for the launched game until you reach the main menu
-
-
Select the left option whenever prompted during the setup process
This will download an exploit DSiWare called F00D43D5.bin, which will be contained in a zip archive (BannerBomb3.zip)
-
-
-
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
-
-
根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
-
This file does not need to be opened or extracted
-
-
-
-
Copy Launcher.dat from the folder for your model and region inside the Release .zip to the root of your SD card
-
打开内存卡的 Nintendo 3DS -> <ID0> -> <ID1> 文件夹
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
-
在 <ID1> 文件夹内创建一个名为 Nintendo DSiWare 的文件夹
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
-
-
-
-
-
第二步 – BannerBomb3
-
-
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
-
-
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
-
Your console should show the BB3 multihax menu
-
-
-
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
-
如果你的主机还没有破解且你打算进行破解，请不要在操作之前更新系统至最新版本。 The methods on earlier firmwares are easier and more stable.
-
如果你的未破解主机已经升级到 11.17.0 了，本教程也已更新对应的方法。 Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Yes, you can still install custom firmware on your 3DS, even after the closure of eShop.
如果你的主机还没有破解且你打算进行破解，请不要在操作之前更新系统至最新版本。 The methods on earlier firmwares are easier and more stable.
-
如果你的未破解主机已经升级到 11.17.0 了，本教程也已更新对应的方法。 Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
-
-
-
-
This method requires a working 3DS camera.
-
-
你需要准备点啥？
-
-
-
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of HBL otherapps (direct download)
-
-
-
操作步骤
-
-
第一步 – 准备工作
-
-
-
将主机关机
-
将你的 SD 卡插入到电脑
-
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
-
-
根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
-
-
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
If you would prefer a visual guide to this section, one is available here.
-
-
-
返回系统设置的主菜单
-
Navigate to Internet Settings -> Nintendo DS Connections, then select “OK” (image)
-
If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
-
-
-
Section VII - Restoring DS Connection Settings
-
-
In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.
-
-
-
打开内存卡的 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 文件夹
-
Copy the 42383841.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder, replacing the existing one
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Once we have movable.sed, we can edit the SD card data of the game Mario Kart 7 to install menuhax67, which will allow us to get Homebrew Launcher access.
-
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-
See here for information about Kartminer7, here for information about menuhax67, and here for information about nimdsphax.
-
-
-
-
你需要准备点啥？
-
-
-
A physical or digital copy of Mario Kart 7 updated to the latest version (v1.2)
-
-
You can update Mario Kart 7 from eShop or by following the update prompt when you launch the game
-
-
-
A computer running Windows, macOS, or Linux
-
Your movable.sed file from completing Seedminer
-
The latest release of Kartminer7 (the release marked WINDOWS if you have a Windows computer, or the release marked LINUX-macOS if you have a macOS or Linux-based computer)
In this section, you will have the 3DS generate some data in Mario Kart 7 that will be used to install the exploit in a later section.
-
-
-
Reinsert your SD card into your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
If you are prompted to, hit “Next” and “OK” to all of the prompts that you see
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press the (Home) button to suspend Mario Kart 7
-
Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
-
Keep your SD card inserted in your computer, as it is still required in the next section
-
-
-
-
-
-
-
Section III - Installing Kartminer7
-
-
-
Extract the Release_BETA_mk7 .zip to somewhere on your computer (i.e. your desktop)
-
Copy your movable.sed file to the resources folder of the Release_BETA_mk7 folder
-
-
Ensure that the file is named exactly movable.sed
-
-
-
Open the backup folder inside of the Release_BETA_mk7 folder
-
Double-click on the BACKUP file corresponding to your console’s region (e.g. backup_USA if you have a USA copy of Mario Kart 7)
-
-
If you are unsure of your console region, you can check System Settings. U = USA; E = EUR, J = JPN
-
If you get a message from Windows Defender, click “More info”, “Run anyway”, then press any key to continue
-
If the backup was successful, you should see a new folder appear
-
If you wish to restore this data at a later date (after finishing this guide), insert your SD card and double-click on the RESTORE file corresponding to your console’s region
-
-
-
Go back to the Release_BETA_mk7 folder, then double-click on the file corresponding to your console’s region (e.g. USA if you have a USA copy of Mario Kart 7)
-
Reinsert your SD card into your console
-
-
-
Section IV - Kartminer7
-
-
-
Power on your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press (A) over and over again
-
-
You should eventually see the “Start Race?” prompt, then the colours on the bottom screen should change from red, to blue, to white
-
If you see the red/blue/white screens but the 3DS crashes, just reboot and try again
-
If you don’t see ANY colours, change your system language (if possible), then try the exploit again
-
-
-
If the exploit was successful, the 3DS will have booted into the 3DS ROP xPloit Injector
-
-
-
Section V - Installing menuhax67
-
-
-
Press (Y) + (D-Pad Down) to install menuhax67
-
-
The console will automatically power off
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的话，你将自动进入 SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
-
-
-
-
-
Section VI - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
-
-
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
-
-
Your console will automatically reboot
-
-
-
将主机关机
-
将你的 SD 卡插入到电脑
-
打开内存卡的 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 文件夹
-
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method requires a computer running Windows, Linux, or macOS. Phones or tablets are NOT currently supported. If you do not have access to a computer, you will need to use an alternate exploit.
+
This method requires a computer running Windows, Linux, or macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
-
-
-
This method requires a working 3DS camera.
-
-
This process will overwrite your Cubic Ninja save file, if you have one.
We use petit-compwner to launch b9sTool, which installs boot9strap.
-
-
See here for more information about petit-compwner.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
-
-
你需要准备点啥？
-
-
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
你需要准备点啥？
-
-
-
The game “Pokémon Picross” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Pokémon Picross
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
检查 SD 卡的根目录是否存在一个名为 3ds 的文件夹，如果没有则手动新建一个
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
-
-
-
-
-
-
-
-
Section II - PicHaxx
-
-
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
This set of instructions does not support the Japanese version of SmileBASIC. The guide for that version can be found here.
-
-
-技术细节（选看）
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
你需要准备点啥？
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Copy the petitcom .icn for your region to the root of your SD card
-
检查 SD 卡的根目录是否存在一个名为 3ds 的文件夹，如果没有则手动新建一个
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
Update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
-
-
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
-
-
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的话，你将自动进入 SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
第三步 – 安装 boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
This set of instructions does not support the USA and EUR versions of SmileBASIC. The guide for those versions can be found here.
-
-
-技术细节（选看）
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
你需要准备点啥？
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
检查 SD 卡的根目录是否存在一个名为 3ds 的文件夹，如果没有则手动新建一个
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
DO NOT update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的话，你将自动进入 SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
第三步 – 安装 boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
你需要准备点啥？
-
-
-
The game “Steel Diver: Sub Wars” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
如果你的主机还没有破解且你打算进行破解，请不要在操作之前更新系统至最新版本。 The methods on earlier firmwares are easier and more stable.
-
如果你的未破解主机已经升级到 11.17.0 了，本教程也已更新对应的方法。 Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
找到你的 Mii 个人形象，然后在上屏寻找你的“朋友代码（Friend Code）”
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
将主机关机
-
-
-
-
-
Next steps
-
-
Select the method based on the application that you have installed on your 3DS. No matter which method you pick, the end result will be the same.
-
-
Mario Kart 7
-
-
This method uses a cartridge or digital copy of Mario Kart 7. Using the movable.sed file, you can modify Mario Kart 7’s SD card data that will give you access to Homebrew Launcher, which will be used for further exploitation.
If you own any DSiWare title on your 3DS, you can dump it to the SD card so that it can be used to temporarily inject Flipnote into DS Connection Settings.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don’t know what those are or do not have the hardware necessary, join Nintendo Homebrew on Discord, open the “#mii-mining-assistance” channel and provide the following:
-
-
Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
-
Your console’s ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see this troubleshooting section if you have multiple)
-
Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
Your console’s year of manufacturing; if you don’t know, don’t say it - it’s not super important
-
-
-
-
-技术细节（选看）
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Because we do not have access to the Friends List, we are deriving the first part of movable.sed using a Mii QR code instead of by performing a two-way friend exchange.
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
-
-
-
-
-
Section I - Prep Work
-
-
In this section, you will set up Seedminer and obtain your console’s files that are needed for mining.
-
-
-
Extract the contents of the Seedminer .zip and move the folder with your operating system’s name to anywhere on your computer
-
-
Keep this location handy, as this Seedminer folder will be where multiple other files are placed
-
-
-
In the Seedminer folder, hold SHIFT and right-click anywhere in the folder’s empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
-
In the command line window, type py -3 -m pip install pycryptodomex, hit ENTER, and allow it to install
-
-
If this command fails with the error No module named pip, you must manually install pip. The methods to do this can be found on this page.
-
-
-
Power on your console while the SD card is inserted
-
Open the Mii Maker app
-
Tap the “QR Code/Image Options” button
-
Tap “Save Mii as QR Code”
-
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
Click on “Import from…”, then select “QR Code” and upload the Mii QR code from earlier
-
Click on “Export to…”, then select “encrypted (.bin)”
-
-
This will download a file named input.bin
-
-
-
Copy this input.bin to the Seedminer folder
-
Open the terminal/PowerShell/Command Prompt window from earlier
-
Inside this window, enter the command py -3 seedminer_launcher3.py id0 <id0>
-
-
Replace <id0> with the ID0 you copied into a document
-
Do not include the angle brackets
-
不要尝试手动输入 ID0，因为很容易输错。 确保那是你在上一节中复制并粘贴的 ID0 以防复制错了
-
-
-
Once it completes, enter the command py -3 seedminer_launcher3.py mii <model> <year>
-
-
Replace <model> with the model of your console (new or old) - if you aren’t sure, only models with the ZL/ZR buttons and C-Stick are “new”
-
Replace <year> with the year the 3DS was made (On Old 3DS consoles, the years on the backplate, (M)2010/(C)2011, are always the same and NOT an indicator) - if you aren’t sure, see below
-
Estimate manufacturing years are: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
You can also leave the year empty, which will make it start in the middle
-
The mining process will usually take up to 90 minutes, depending on luck and your GPU’s strength
-
The first stage will likely max out at roughly offset 1500, depending on console model
-
If the second stage (after seeing movable_part2.sed generation success) gets past offset 100, verify that you input the correct ID0. If your ID0 is correct, you cannot use this method and will have to update to the latest version and see if a non-Seedminer method is available for you here
-
If you see the message input.bin is invalid size, remake the input.bin using your QR Code. If it still fails, open a different browser and remake the input.bin there
-
If you see the message LFCS has been left blank, use the opposite console model (e.g. mii old instead of mii new)
-
-
-
When it finishes, a file called movable.sed will appear in the Seedminer folder
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
找到你的 Mii 个人形象，然后在上屏寻找你的“朋友代码（Friend Code）”
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
将主机关机
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
找到你的 Mii 个人形象，然后在上屏寻找你的“朋友代码（Friend Code）”
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
将主机关机
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
-
-
-Multiple long folder names in Nintendo 3DS folder
-
-
-
-
This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. 为了确定哪个文件夹是你 3DS 的，请按照以下步骤做：
-
-
-
将 Nintendo 3DS 文件夹重命名为 BACKUP_Nintendo 3DS
-
Reinsert your SD card into your console
-
Power on your console
-
Wait for the console to generate the SD card data
-
-
-
-
-Important! You have been locked out of the automated part1 dumper system...
-
-
你的好友码已被本服务锁定，因为你没有在服务的限定时间内将服务给的机器人好友码添加到好友列表，且尝试次数过多，浪费了机器人的感情。 确保你的 3DS 已经连上了网络，然后加入 Nintendo Homebrew Discord 服务器来要求解锁。
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
网站已经确定无法获取到你的 movable.sed。 确保先前你输入到网站的 ID0 是正确的。 If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
-
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
-
-
-
-
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
-
-
-
-
-
-
Your SD card should now look something like this:
-
-
-
-
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
-
-
-
-
-DSiWare Management menu crashes without showing BB3 multihax menu
-
确保 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 里面只有 F00D43D5.bin 这一个文件。 If it is, then re-create it with the Bannerbomb3 Injector.
-
-
另外，请确保 bb3.bin 正确地放置在 SD 卡的根目录下。 If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.
-
-
If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
-
-
-
-DSiWare Management menu displays "No accessible software data."
-
-
F00D43D5.bin 没有放进 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare。 请确保 Nintendo DSiWare 拼写和空格位置正确。 不区分大小写。
-
-
-
-DSiWare Management shows a question mark
-
-
你放的 F00D43D5.bin 文件可能有问题（损坏或被用于错误的 3DS）。 Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果你下到的东西看不到 .bin 后缀，请不要重命名它。
-
-
-
-"An exception occurred" or Errdisp when opening Picross
-
-
Your console already has custom firmware. 你应该检查一下。
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果你下到的东西看不到 .bin 后缀，请不要重命名它。
-
-
-
-Game starts normally
-
-
Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
-
再次尝试触发漏洞
-
-
-
Try changing the system language to something other than the current language
-
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
arm11code.bin 文件丢失或位置错误。 Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
-
-
-
-
-
-
-An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
-
-
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -981,6 +572,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1080,7 +680,7 @@ window.cookieconsent.initialise({
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
-
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
+
再次尝试触发漏洞
+
+
+
Try changing the system language to something other than the current language
+
+
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
arm11code.bin 文件丢失或位置错误。 Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
+
+
+
+
+
+
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
+
+
MSET9 is currently the only exploit for 3DS / 3DS XL / 2DS consoles on firmware 11.17.0 that is free and does not require any software. If you’re unable to use it, you’ll need to use one of these methods, which all have some sort of prerequisite.
-
-
Installed eShop titles
-
-
Because Nintendo eShop no longer allows purchases, it is no longer possible to purchase new titles. However, you can re-download a title if you had purchased or downloaded them before purchases stopped being possible.
-
-
Any one of the following titles can be used in conjunction with Seedminer to install custom firmware:
-
-
Mario Kart 7 (common preinstalled title; a physical cartridge also works)
-
Pokémon Picross (free-to-play; digital only)
-
Steel Diver: Sub Wars (free-to-play; digital only)
This method requires a compatible DS flashcart to be flashed with ntrboot, which works on all 3DS-family consoles regardless of model or region.
-
-
If none of the above options are available to you, this is the cheapest available option. If you don’t already have a compatible cartridge, a preflashed ntrboot-compatible cartridge can be purchased here for roughly $20 USD.
Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
-
-
These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, choose the other method.
The latest release of Frogminer_save (Frogminer_save.zip)
-
-
-
第一節 — 檢查自製韌體
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Power off your console
-
按住「Select」鍵
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
-
Under the “MovableSed” field, upload your movable.sedusing the “Browse…” option
-
選擇『Build』
-
-
Wait a few seconds for the build process to complete
-
-
-
In the Build History section on the left, type the Username into the “Filter Builds” field
-
Click on the first search result
-
-
This result should have the latest timestamp
-
-
-
Click the “output_(name).zip” link
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
Create a folder named Nintendo DSiWare inside of the <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Open the output_(name) .zip file and navigate to China_Taiwan -> output_setup
-
Copy all six .bin files to the Nintendo DSiWare folder
Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
-
Power off your console
-
將 SD 卡插入至電腦中
-
於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Open the output_(name) .zip file and navigate to China_Taiwan -> output_hax
-
Copy the .bin file that is the same number as the one that was on the second page of the DSiWare Management menu to the Nintendo DSiWare folder, and overwrite when prompted
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
稍息等待
-
-
The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the console showing an error message and rebooting
-
如果您沒看到紫屏，那麼您可能某步驟做錯了
-
-
-
You should now have the file 42383821.bin on the root of your SD card
-
於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Delete all of the .bin files in the Nintendo DSiWare folder
Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
-
-
You might want to put in a different name to differentiate it from BannerBomb3’s output
-
-
-
Under the “DSiBin” field, upload your 42383821.bin file using the first “Browse…” option
-
Under the “MovableSed” field, upload your movable.sed file using the second “Browse…” option
-
Under the “InjectionTarget” field, set the injection target to DSdownloadplay(NOT memorypit)
-
選擇『Build』
-
-
Wait a few seconds for the build process to complete
-
-
-
In the Build History section on the left, type the Username into the “Filter Builds” field
-
Click on the first search result
-
-
This result should have the latest timestamp
-
-
-
Click the “output_(name).zip” link
-
於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Copy the 484E4441.bin file from the hax folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
移動至 檔案管理 (Data Management) -> DSiWare
-
在 SD 卡欄位中選擇『Haxxxxxxxxx!』程式
-
選擇『複製 (Copy)』並選擇『OK』
-
-
-
第五節 — Flipnote 漏洞
-
-
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
If you would prefer a visual guide to this section, one is available here.
-
-
-
退出系統設定
-
Launch Download Play on your console (the orange icon with a 3DS on it)
-
選擇『任天堂 DS (Nintendo DS)』
-
如果漏洞成功執行，您的 3DS 將自動啟動『うごくメモ帳 (Flipnote Studio)』
-
Complete the initial setup process for the launched game until you reach the main menu
-
-
Select the left option whenever prompted during the setup process
Upload your movable.sed using the “Choose File” option
-
Click “Build and Download”
-
-
This will download an exploit DSiWare called F00D43D5.bin, which will be contained in a zip archive (BannerBomb3.zip)
-
-
-
Copy bb3.bin from Release_v3.0.zip to the root of your SD card
-
-
「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
-
This file does not need to be opened or extracted
-
-
-
-
Copy Launcher.dat from the folder for your model and region inside the Release .zip to the root of your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
-
-
<ID0> is the 32-letter folder name that you copied in Seedminer
-
<ID1> is a 32-letter folder inside of the <ID0>
-
If you have multiple <ID1> folders, follow the instructions here
-
-
-
-
Create a folder named Nintendo DSiWare inside of the <ID1>
-
-
If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
-
-
Copy the F00D43D5.bin file from BannerBomb3.zip to the Nintendo DSiWare folder
-
-
-
-
-
第二節 — BannerBomb3
-
-
In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
-
-
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
-
Your console should show the BB3 multihax menu
-
-
-
Use the D-Pad to navigate and press the (A) button to select “Install *hax”
-
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
Yes, you can still install custom firmware on your 3DS, even after the closure of eShop.
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
freakyhax is an exploit for the game Freakyforms Deluxe discovered and released by plutooo. It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
-
-
-
-
This method requires a working 3DS camera.
-
-
必備項目
-
-
-
A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
The latest release of Luma3DS (the Luma3DS .zip file)
-
The latest release of HBL otherapps (direct download)
-
-
-
操作說明
-
-
第一節 — 準備工作
-
-
-
Power off your console
-
將 SD 卡插入至電腦中
-
Copy all files and folders inside the /build/<your console and region>/exploit/ folder from the freakyhax .zip to the root of your SD card
-
-
「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
-
-
-
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
This method of using Seedminer for further exploitation uses your movable.sed file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application.
-
-
This is a currently working implementation of the “FIRM partitions known-plaintext” exploit detailed here.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
The latest release of Frogminer_save (Frogminer_save.zip)
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
The latest release of Luma3DS (the Luma3DS .zip file)
-
-
-
第一節 — 檢查自製韌體
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Power off your console
-
按住「Select」鍵
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
-
-
第二節 — 準備工作
-
-
In this section, you will copy the files necessary to temporarily replace DS Connection Settings with Flipnote Studio, which is used to launch the boot9strap (custom firmware) installer.
In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
-
-
If you would prefer a visual guide to this section, one is available here.
-
-
-
回到系統設定主選單
-
Navigate to Internet Settings -> Nintendo DS Connections, then select “OK” (image)
-
If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
-
Using the touch-screen, select the large left box, then select the box with an SD card icon
-
Once the menu loads, select the face icon, then the bottom right icon to continue
-
Press (X) or (UP) on the D-Pad depending on which is shown on the top screen
-
Select the second button along the top with a film-reel icon
-
Scroll right until reel “3/3” is selected
-
Tap the third box with the letter “A” in it
-
Scroll left until reel “1/3” is selected
-
Tap the fourth box with the letter “A” in it
-
If the exploit was successful, your console will have loaded b9sTool
-
-
-
第五節 — 安裝 boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
Using the D-Pad, move to “Install boot9strap”
-
-
If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section
-
-
-
Press (A), then press START and SELECT at the same time to begin the process
-
Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
You may have to force power off by holding the power button
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
If you see the Luma Configuration screen, power off your console and continue to the next section
-
-
-
-
-
Section VI - Luma3DS Configuration
-
-
-
Press and hold (Select), and while holding (Select), power on your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
按『Start』鍵以存檔並重新啟動系統
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
-
-
-
Section VII - Restoring DS Connection Settings
-
-
In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.
-
-
-
於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Copy the 42383841.bin file from the clean folder of the downloaded DSiWare archive (output_(name).zip) to the Nintendo DSiWare folder, replacing the existing one
-
Reinsert your SD card into your console
-
Power on your console
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Once we have movable.sed, we can edit the SD card data of the game Mario Kart 7 to install menuhax67, which will allow us to get Homebrew Launcher access.
-
-
Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-
See here for information about Kartminer7, here for information about menuhax67, and here for information about nimdsphax.
-
-
-
-
必備項目
-
-
-
A physical or digital copy of Mario Kart 7 updated to the latest version (v1.2)
-
-
You can update Mario Kart 7 from eShop or by following the update prompt when you launch the game
-
-
-
A computer running Windows, macOS, or Linux
-
Your movable.sed file from completing Seedminer
-
The latest release of Kartminer7 (the release marked WINDOWS if you have a Windows computer, or the release marked LINUX-macOS if you have a macOS or Linux-based computer)
-
The latest release of boot9strap (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
-
-
-
Section I - Preparing Mario Kart 7 data
-
-
In this section, you will have the 3DS generate some data in Mario Kart 7 that will be used to install the exploit in a later section.
-
-
-
Reinsert your SD card into your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
If you are prompted to, hit “Next” and “OK” to all of the prompts that you see
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press the (Home) button to suspend Mario Kart 7
-
Disable wireless connections by flicking the wireless switch on the side of the console or by navigating to HOME Menu Settings (top left) -> Wireless Communication -> OFF
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Copy menuhax67_installer.3dsx from the menuhax .zip to the /3ds/ folder on your SD card
-
Copy Launcher.dat from the folder for your model and region inside the menuhax .zip to the root of your SD card
-
Keep your SD card inserted in your computer, as it is still required in the next section
-
-
-
-
-
-
-
Section III - Installing Kartminer7
-
-
-
Extract the Release_BETA_mk7 .zip to somewhere on your computer (i.e. your desktop)
-
Copy your movable.sed file to the resources folder of the Release_BETA_mk7 folder
-
-
Ensure that the file is named exactly movable.sed
-
-
-
Open the backup folder inside of the Release_BETA_mk7 folder
-
Double-click on the BACKUP file corresponding to your console’s region (e.g. backup_USA if you have a USA copy of Mario Kart 7)
-
-
If you are unsure of your console region, you can check System Settings. U = USA; E = EUR, J = JPN
-
If you get a message from Windows Defender, click “More info”, “Run anyway”, then press any key to continue
-
If the backup was successful, you should see a new folder appear
-
If you wish to restore this data at a later date (after finishing this guide), insert your SD card and double-click on the RESTORE file corresponding to your console’s region
-
-
-
Go back to the Release_BETA_mk7 folder, then double-click on the file corresponding to your console’s region (e.g. USA if you have a USA copy of Mario Kart 7)
-
Reinsert your SD card into your console
-
-
-
Section IV - Kartminer7
-
-
-
Power on your console
-
Open Mario Kart 7
-
Tap the “Mario Kart Channel” button on the bottom
-
Tap the “StreetPass List” button on the bottom of the screen, in the middle
-
Press (A) over and over again
-
-
You should eventually see the “Start Race?” prompt, then the colours on the bottom screen should change from red, to blue, to white
-
If you see the red/blue/white screens but the 3DS crashes, just reboot and try again
-
If you don’t see ANY colours, change your system language (if possible), then try the exploit again
-
-
-
If the exploit was successful, the 3DS will have booted into the 3DS ROP xPloit Injector
-
-
-
Section V - Installing menuhax67
-
-
-
Press (Y) + (D-Pad Down) to install menuhax67
-
-
The console will automatically power off
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的話，您將自動進入 SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
-
-
-
-
-
Section VI - Installing boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
按『Start』鍵以存檔並重新啟動系統
-
-
-
Section VII - Removing menuhax67
-
-
In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
-
-
-
啟動『下載通信(Download Play)』程式 ()
-
等到你看到 Nintendo 3DS 和 Nintendo DS 按鈕
-
同時按下『L』+『下』+『Select』鍵以啟動 Rosalina 選單
-
選擇『Miscellaneous options』
-
選擇『Switch the hb. title to the current app.』
-
按『B』繼續
-
按『B』回到 Rosalina 主選單
-
按『B』退出 Rosalina 選單
-
Press (Home) to suspend Download Play
-
Press the “Close” button on the bottom screen to close Download Play
-
Re-launch the Download Play application
-
Your console should load the Homebrew Launcher
-
-
If your console is stuck on the loading splash screen, you are missing boot.3dsx from the root of your SD card
-
-
-
Launch menuhax67_installer from the list of homebrew
-
Select REMOVE menuhax67
-
When you see “done.”, press (A), then press (A) on “EXIT to menu”
-
-
-
At this point, you can re-enable wireless communications.
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
-
-
-
-
-
-
-
-
Section II - menuhax67
-
-
In this section you will use the menuhax67 exploit installed earlier to launch nimdsphax, which will load SafeB9SInstaller.
-
-
-
Power on your console
-
Tap on the small HOME Menu settings icon in the top left of the bottom screen ()
-
-
If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-
-
-
If the exploit was successful, your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的話，您將自動進入 SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
第三節 — 安裝 boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
按『Start』鍵以存檔並重新啟動系統
-
-
-
Section IV - Removing menuhax67
-
-
In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
-
-
-
Launch System Settings on your console
-
Navigate to Data Management -> DSiWare -> SD Card (image)
-
Use the D-Pad to navigate and press the (A) button to select “Uninstall *hax”
-
-
Your console will automatically reboot
-
-
-
Power off your console
-
將 SD 卡插入至電腦中
-
於您的 SD 卡中，移動至 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare
-
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method requires a computer running Windows, Linux, or macOS. Phones or tablets are NOT currently supported. If you do not have access to a computer, you will need to use an alternate exploit.
+
This method requires a computer running Windows, Linux, or macOS. ChromeOS and Android devices have an app that is currently not covered here. iOS devices are not supported. If you do not have access to a computer, you will need to use an alternate exploit.
Ninjhax2 is an exploit for the game “Cubic Ninja” made by smealum. This page uses an updated version of ninjhax by zoogie called ninjhax2-dx, which supports 11.17.0.
-
-
-
This method requires a working 3DS camera.
-
-
This process will overwrite your Cubic Ninja save file, if you have one.
We use petit-compwner to launch b9sTool, which installs boot9strap.
-
-
See here for more information about petit-compwner.
-
-
-
-
You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
-
-
必備項目
-
-
-
11.16.0 or 11.17.0 users: The v6.1.1 release of b9sTool
-
-
Make absolutely sure that you are one of these firmwares, as being on other firmwares may lead to a BRICK
-
-
-
The latest release of Luma3DS (the Luma3DS .zip file)
-
-
-
第一節 — 檢查自製韌體
-
-
As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
-
-
-
Power off your console
-
按住「Select」鍵
-
Power on your console while still holding the (Select) button
-
If the check was successful, you will boot to the HOME Menu and you may proceed with this guide
-
Power off your console
-
-
-
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
-
-
第二節 — 準備工作
-
-
In this section, you will copy the files necessary to launch b9sTool, which is used to launch the boot9strap (custom firmware) installer.
-
-
-
將 SD 卡插入至電腦中
-
Copy boot.nds (B9STool) from the release .zip to the root of your SD card
-
-
「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
必備項目
-
-
-
The game “Pokémon Picross” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Pokémon Picross
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
在 SD 卡的根目錄底下建立一個新資料夾 3ds
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
-
-
-
-
-
-
-
-
Section II - PicHaxx
-
-
In this section, you will create a hacked Pokémon Picross save file that, when loaded, will run the Homebrew Launcher on your console.
This set of instructions does not support the Japanese version of SmileBASIC. The guide for that version can be found here.
-
-
-Technical Details (optional)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
必備項目
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
Copy the otherapp payload for your model/region/version from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer the .wav for your region from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
Copy the petitcom .icn for your region to the root of your SD card
-
在 SD 卡的根目錄底下建立一個新資料夾 3ds
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
Update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-xxx.TXT file, then press OK, then “Yes” to execute it
-
-
If you get kicked back into menu, make sure you’re using the latest version of SmileBASIC
-
-
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的話，您將自動進入 SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
第三節 — 安裝 boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
按『Start』鍵以存檔並重新啟動系統
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This set of instructions does not support the USA and EUR versions of SmileBASIC. The guide for those versions can be found here.
-
-
-Technical Details (optional)
-
smilehax-IIe is an exploit for the game “SmileBASIC” made by zoogie, compatible with system versions 9.0.0 through 11.17.0 for USA/EUR/JPN region consoles.
-
-
-
必備項目
-
-
The game “SmileBASIC” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install SmileBASIC
-
-
-
The latest release of smilehax-IIe (direct download)
Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the payload to otherapp.bin
-
-
Do not add the .bin extension if you do not already see it
-
-
-
Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
-
在 SD 卡的根目錄底下建立一個新資料夾 3ds
-
-
This folder stores homebrew applications and data; it is different from the Nintendo 3DS folder that the console automatically generates
-
-
-
Copy the nimdsphax folder from the nimdsphax .zip to the /3ds/ folder on your SD card
-
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
-
Rename the 00117200 folder to _00117200
-
Reinsert your SD card into your console
-
Power on your console
-
-
-
-
-
-
-
-
-
Section II - smilehax
-
-
-
Launch SmileBASIC
-
-
DO NOT update the game if prompted
-
-
-
Select the “Publish/Download Projects” option
-
Select the “Download (Receive) using Public Key” option
-
Press the “Yes” button
-
Enter the Public Key “NJEQK3A4” using the on-screen keyboard
-
Press the “Yes” button to confirm the download of PMODEM141
-
Press “OK”, then “Back”, then “Browse Projects”
-
Select PMODEM141, then press “Select File”
-
Select PMODEM141.PRG, then press “OK”, then “Yes” to execute it
-
Select RECEIVE FILE SIMPLEX
-
Prepare the device you use to play the .wav file
-
Keep your console about a foot from the .wav file playing devices’ speaker and use a reasonable (not loud) volume to play the .wav
-
Now select 300BPS, then play the .wav file
-
When it finishes, press “Yes”, then press “OK”
-
Press the START button
-
Select the SH2E-JPN.TXT file, then press OK, then “Yes” to execute it
-
Your console will have booted into the Homebrew Launcher
-
Launch nimdsphax from the list of homebrew
-
如果一切成功的話，您將自動進入 SafeB9SInstaller
-
-
If your console freezes on a red screen, hold the POWER button until it turns off, then retry this section
-
-
-
-
-
第三節 — 安裝 boot9strap
-
-
In this section, you will install custom firmware onto your console.
-
-
-
When prompted, input the key combo given on the top screen to install boot9strap
-
-
If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
-
-
-
Once it is complete, press (A) to reboot your console
-
Your console should have booted into the Luma3DS configuration menu
-
-
Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-
For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything)
-
If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
-
-
-
按『Start』鍵以存檔並重新啟動系統
-
-
-
At this point, your console will boot to Luma3DS by default.
-
-
Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-
On the next page, you will install useful homebrew applications to complete your setup.
This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
-
-
-
This process will overwrite your Steel Diver: Sub Wars save file, if you have one. If you wish to preserve your Steel Diver: Sub Wars game data, you should make a backup of your 00000001.sav file before overwriting it.
-
-
必備項目
-
-
-
The game “Steel Diver: Sub Wars” installed on your console
-
-
If you have downloaded it before, you can redownload it
-
Your SD card must be inserted in your console to install Steel Diver: Sub Wars
If your console is running Luma 10.2.1 or higher, it is 100% safe to update. You can check your Luma version by holding (Select) while booting your console.
If your console is on an older Luma version, you should update Luma before you update your console to 11.17.0.
-
If your console does not yet have custom firmware, do NOT update to the latest version unless this guide instructs you to. The methods on earlier firmwares are easier and more stable.
-
If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Both New3DS and Old3DS now have free software methods that (for the most part) do not require external hardware or software.
+
If your console does not yet have custom firmware, you can install it now on all firmwares with this guide.
-
If this is your first time modding a 3DS (or you’re unfamiliar with technology), keep reading! Otherwise, if you have prior experience and know what you’re doing, continue to Get Started.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
將 SD 卡插入至電腦中
-
移動至 SD 卡的 Nintendo 3DS 資料夾中
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
選擇您的 Mii 個人檔案，並找尋您的好友代碼
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next steps
-
-
Select the method based on the application that you have installed on your 3DS. No matter which method you pick, the end result will be the same.
-
-
Mario Kart 7
-
-
This method uses a cartridge or digital copy of Mario Kart 7. Using the movable.sed file, you can modify Mario Kart 7’s SD card data that will give you access to Homebrew Launcher, which will be used for further exploitation.
If you own any DSiWare title on your 3DS, you can dump it to the SD card so that it can be used to temporarily inject Flipnote into DS Connection Settings.
This method uses the game Pokémon Picross, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method uses the game Steel Diver: Sub Wars, which was a free-to-play game. Using the movable.sed file, you can create a hacked save file that will give you access to Homebrew Launcher, which will be used for further exploitation.
This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don’t know what those are or do not have the hardware necessary, join Nintendo Homebrew on Discord, open the “#mii-mining-assistance” channel and provide the following:
-
-
Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
-
Your console’s ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see this troubleshooting section if you have multiple)
-
Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-
Your console’s year of manufacturing; if you don’t know, don’t say it - it’s not super important
-
-
-
-
-Technical Details (optional)
-
-
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
-
-
Because we do not have access to the Friends List, we are deriving the first part of movable.sed using a Mii QR code instead of by performing a two-way friend exchange.
If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V. If this returns a version number, it will work for this guide.
-
-
-
-
-
Section I - Prep Work
-
-
In this section, you will set up Seedminer and obtain your console’s files that are needed for mining.
-
-
-
Extract the contents of the Seedminer .zip and move the folder with your operating system’s name to anywhere on your computer
-
-
Keep this location handy, as this Seedminer folder will be where multiple other files are placed
-
-
-
In the Seedminer folder, hold SHIFT and right-click anywhere in the folder’s empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
-
In the command line window, type py -3 -m pip install pycryptodomex, hit ENTER, and allow it to install
-
-
If this command fails with the error No module named pip, you must manually install pip. The methods to do this can be found on this page.
-
-
-
Power on your console while the SD card is inserted
-
Open the Mii Maker app
-
Tap the “QR Code/Image Options” button
-
Tap “Save Mii as QR Code”
-
Select a Mii Character that was created on this console, NOT imported from another console (make a new one first if you don’t have any), and press “OK”
-
Power off your console
-
將 SD 卡插入至電腦中
-
移動至 SD 卡的 Nintendo 3DS 資料夾中
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
Click on “Import from…”, then select “QR Code” and upload the Mii QR code from earlier
-
Click on “Export to…”, then select “encrypted (.bin)”
-
-
This will download a file named input.bin
-
-
-
Copy this input.bin to the Seedminer folder
-
Open the terminal/PowerShell/Command Prompt window from earlier
-
Inside this window, enter the command py -3 seedminer_launcher3.py id0 <id0>
-
-
Replace <id0> with the ID0 you copied into a document
-
Do not include the angle brackets
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Once it completes, enter the command py -3 seedminer_launcher3.py mii <model> <year>
-
-
Replace <model> with the model of your console (new or old) - if you aren’t sure, only models with the ZL/ZR buttons and C-Stick are “new”
-
Replace <year> with the year the 3DS was made (On Old 3DS consoles, the years on the backplate, (M)2010/(C)2011, are always the same and NOT an indicator) - if you aren’t sure, see below
-
Estimate manufacturing years are: Old 3DS 2011, Old 3DS XL 2013, Old 2DS 2015, New 3DS 2016, New 3DS XL 2016, New 2DS XL 2017
-
You can also leave the year empty, which will make it start in the middle
-
The mining process will usually take up to 90 minutes, depending on luck and your GPU’s strength
-
The first stage will likely max out at roughly offset 1500, depending on console model
-
If the second stage (after seeing movable_part2.sed generation success) gets past offset 100, verify that you input the correct ID0. If your ID0 is correct, you cannot use this method and will have to update to the latest version and see if a non-Seedminer method is available for you here
-
If you see the message input.bin is invalid size, remake the input.bin using your QR Code. If it still fails, open a different browser and remake the input.bin there
-
If you see the message LFCS has been left blank, use the opposite console model (e.g. mii old instead of mii new)
-
-
-
When it finishes, a file called movable.sed will appear in the Seedminer folder
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
將 SD 卡插入至電腦中
-
移動至 SD 卡的 Nintendo 3DS 資料夾中
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
選擇您的 Mii 個人檔案，並找尋您的好友代碼
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
To install boot9strap on your console, we derive your console’s unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the data encryption key (movable.sed) for your console.
This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
-
-
-
-
Section I - Prep Work
-
-
In this section, you will get the necessary details from your 3DS that are required to figure out your console’s encryption key.
-
-
-
Before following this section:
-
-
Ensure that you have turned on your console with the SD card inserted at least once to generate the necessary data
-
Ensure that your console is connected to the Internet (you should see a blue “Internet” indicator on the top-left corner of the HOME screen)
-
-
-
-
-
Power off your console
-
將 SD 卡插入至電腦中
-
移動至 SD 卡的 Nintendo 3DS 資料夾中
-
Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
-
-
This 32-letter name is system-specific and will be different for each console
If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo’s servers (due to a ban or connection issues)
-
-
-
選擇您的 Mii 個人檔案，並找尋您的好友代碼
-
-
-
Section II - Seedminer
-
-
In this section, you will use the Bruteforce Movable website to retrieve your console’s encryption key in the form of movable.sed.
If the site isn’t working, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
-
-
-
Enter your console’s Friend Code (with no spaces or dashes) into the “Your friend code” field
-
Paste your console’s 32 character long folder name into the “Your ID0” field
-
-
Do not attempt to enter the ID0 manually, as it is easy to make a mistake. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-
-
-
Select “Go”
-
-
If the site immediately goes to step 4, the website has already correctly processed your bruteforce request. You can download your movable.sed file and continue to the next section. You do not need to (re-)add the bot
-
-
-
Use the “Register Friend” button on your console to add the bot’s friend code as given by the website
-
-
If prompted, the name that you give to the friend does not matter
-
-
-
Wait for the site to update
-
-
If it does not, wait a few minutes before refreshing the page once
-
-
-
Once the site processes your information, the site will continue to Step 2: Bruteforce automatically
-
Wait for the remainder of the process to complete
-
-
This is usually fast (1-5 minutes)
-
During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
-
If you are still waiting after half an hour, join Nintendo Homebrew on Discord and ask (in English) for someone there to assist you
When the process is completed, download your movable.sed file from the site
-
-
Keep this file as you will need it in the upcoming page
-
-
-
Power off your console
-
-
-
-
-
Next step: BannerBomb3
-
-
Once you have your console’s encryption key (movable.sed), you can use it in conjunction with BannerBomb3, which uses your movable.sed file to take advantage of exploits in the System Settings application.
-
-
-Multiple long folder names in Nintendo 3DS folder
-
-
-
-
This occurs when you use your SD card in multiple 3DS consoles and is intended to prevent inadvertently merging data that would not be valid on other consoles. 若要確定哪個資料夾屬於您 3DS 的，請按照以下說明操作：
-
-
-
將 Nintendo 3DS 資料夾重新命名為 BACKUP_Nintendo 3DS
-
Reinsert your SD card into your console
-
Power on your console
-
Wait for the console to generate the SD card data
-
-
-
-
-We were unable to successfully complete your bruteforce request. :`(
-
-
The website has determined that your movable.sed cannot be brute-forced. Ensure that you gave the correct ID0 to the website. If your ID0 is correct, then you will be unable to use Seedminer and you will have to use an alternate method.
This occurs when you use multiple SD cards with the same 3DS and then merge the SD card contents together. Both are “valid”, but the 3DS can only read one at a time.
-
-
You will need to determine which one contains your data. First of all, back up all of the folders, in case something goes wrong:
-
-
-
-
Now, delete all but one of the folders from your SD card. Generally, you will want to delete the smallest one(s), as the one with all your data will probably have more space occupied. You can compare which folder is occupying more space by right-clicking it and clicking “Properties”:
-
-
-
-
-
-
Your SD card should now look something like this:
-
-
-
-
Now, put your SD card into your 3DS and turn it on. If your data is still there, you deleted the right folder and have now determined your correct ID1. If everything has disappeared, go back into the backup folder that you made earlier and try the other folder.
-
-
-
-
-DSiWare Management menu crashes without showing BB3 multihax menu
-
確保 F00D43D5.bin 是 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare 裡面的唯一檔案。 If it is, then re-create it with the Bannerbomb3 Injector.
-
-
Also, ensure that bb3.bin is on the root of the SD card. If it is missing, then download the latest release of Bannerbomb3 (direct download), and copy the bb3.bin file from the Release .zip to the root of your SD card.
-
-
If neither of these solutions fixes this problem, then custom firmware may have been uninstalled on this console in a way that makes this method impossible to perform. If this is the case, join Nintendo Homebrew on Discord and ask, in English, for help.
-
-
-
-DSiWare Management menu displays "No accessible software data."
-
-
F00D43D5.bin 沒有放進 Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare。 請確保 Nintendo DSiWare 拼寫和空格位置正確。 請注意大小寫是沒有關係的。
-
-
-
-DSiWare Management shows a question mark
-
-
您所使用的 F00D43D5.bin 檔案可能有問題(損壞或用於錯誤的 3DS 主機)。 Re-create your F00D43D5.bin file with the Bannerbomb3 Injector, ensuring that you use the movable.sed file for your console.
您所使用的 42383821.bin 檔案有問題(有問題、放錯位置或者損壞)。 Re-create your files with the DSIHaxInjector_new website and ensure that you place the 42383821.bin file from output.zip -> hax in Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare.
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
Your 00000001.sav and/or otherapp.bin files may be misplaced. Ensure that 00000001.sav is in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data and that otherapp.bin is on the root of your SD card.
-
-
If your files are in the correct locations, re-create the save using the PicHaxx Save Tool, then place it in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data. Ensure that the file is named exactly 00000001.sav and that you used your console’s movable.sed to create it. Re-download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
-
-"An exception occurred" or Errdisp when opening Picross
-
-
Your console already has custom firmware. 請先檢查是否已安裝自製韌體 。
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There is an issue with your otherapp.bin file. Download HBL otherapps, place the .bin file relevant to your console to the root of your SD card, and rename it to otherapp.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
-
-Game starts normally
-
-
Your modified 00000001.sav file may be misplaced, or you may have used the wrong movable.sed when creating it. Re-generate your movable.sed from Bruteforce Movable, then re-create the save using the PicHaxx Save Tool and place the resulting file (00000001.sav) in Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data.
-
-
-Red/purple/pink and white screen after running Browserhax
-
-
This likely indicates that you already have custom firmware. 請先檢查是否已安裝自製韌體 。
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
The file arm11code.bin is missing or misplaced. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
-
-"An error has occurred, forcing the software to close..." (white message box)
-
-
There may be an issue with your arm11code.bin file. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
You can also try resetting your browser save data:
-
-
-
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
-
Try the exploit again
-
-
-
-
-
-Opening the browserhax QR code or URL crashes
-
-
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
-
-
-
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
-
-
-
-"PrepareArm9ForTwl returned error c8804631!"
-
-
Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.
-
-
若仍無法正常使用，請試著使用另一張 SD 卡。
-
-
-
Installing boot9strap (super-skaterhax)
-
-
-"An error has occurred. Please save your data in any software currently in use, then restart the system."
-
-
The date is set incorrectly. To set it correctly, follow these steps:
-
-
-
Select the System Settings icon on the HOME Menu, and tap Open.
-
Tap Other Settings.
-
Tap Date & Time.
-
Tap Today’s date.
-
Tap Up/Down Arrows to set the correct Day, Month and Year.
-
Select OK to confirm.
-
-
-
If the problem persists:
-
-
-
Ensure that arm11code.bin, browserhax_hblauncher_ropbin_payload.bin, and boot.3dsx are on the root of the SD card (not inside of any folder)
-
Ensure that you selected the correct payload for your region AND system version
Launch the browser, then launch the browser settings
-
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
-
Try the exploit again
-
-
-
Try changing the system language to something other than the current language
-
-
-
-
-
-"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
-
-
The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
-
-
-
-
-
-
-An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
-
-
This likely indicates that you already have custom firmware. 請先檢查是否已安裝自製韌體 。
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux), then start again from the beginning of Section I.
+
If your SD card layout is correct, then your SD card most likely isn’t being read by your console. Re-format it (Windows, Linux, macOS), then start again from the beginning of Section I.
@@ -979,6 +571,15 @@ window.cookieconsent.initialise({
+
+Error 04: No HOME Menu Extdata.
+
+
Your SD card is not formatted properly.
+
+
Copy everything off the SD Card to your PC, re-format it (Windows, Linux, macOS), copy everything back, then start again from the beginning of Section I.
+
+
+
Error 05: No Mii Maker Data!
@@ -1078,7 +679,7 @@ window.cookieconsent.initialise({
You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files.
-
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux(this will wipe your SD card data)
+
Alternatively, your SD card may be improperly formatted or partitioned. Try reformatting your SD card: Windows, Linux, macOS(this will wipe your SD card data)
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initilize Save Data” or “Clear All Save Data”)
+
Try the exploit again
+
+
+
Try changing the system language to something other than the current language
+
+
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).
+
+
+
+
+
+
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
+
+
This likely indicates that you already have custom firmware. 請先檢查是否已安裝自製韌體 。
+
+
+
+
安裝 boot9strap (透過 SSLoth-Browser)
+
+
+Red/purple/pink and white screen after running Browserhax
+
+
This likely indicates that you already have custom firmware. 請先檢查是否已安裝自製韌體 。
+
+
+
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+
The file arm11code.bin is missing or misplaced. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
+
+
+
+"An error has occurred, forcing the software to close..." (white message box)
+
+
There may be an issue with your arm11code.bin file. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
+
+
You can also try resetting your browser save data:
+
+
+
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
+
Try the exploit again
+
+
+
+
+
+Opening the browserhax QR code or URL crashes
+
+
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
+
+
+
Launch the browser, then launch the browser settings
+
Scroll to the bottom and select “Reset Save Data” (it may also be called “Initialize Save Data” or “Clear All Save Data”)
There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. 如果您的電腦沒有顯示 .bin 的副檔名，請勿手動新增。
+
+
+
+"PrepareArm9ForTwl returned error c8804631!"
+
+
Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.
)
- 
)
