diff --git a/_pages/af_ZA/a9lh-to-b9s.txt b/_pages/af_ZA/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/af_ZA/a9lh-to-b9s.txt +++ b/_pages/af_ZA/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt b/_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/af_ZA/home.txt b/_pages/af_ZA/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/af_ZA/home.txt +++ b/_pages/af_ZA/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/af_ZA/homebrew-launcher-(alternatives).txt b/_pages/af_ZA/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/af_ZA/homebrew-launcher-(alternatives).txt +++ b/_pages/af_ZA/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/af_ZA/homebrew-launcher-(soundhax).txt b/_pages/af_ZA/homebrew-launcher-(soundhax).txt index 8f6168725d..f8e1ee1b1d 100644 --- a/_pages/af_ZA/homebrew-launcher-(soundhax).txt +++ b/_pages/af_ZA/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound diff --git a/_pages/af_ZA/updating-b9s.txt b/_pages/af_ZA/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/af_ZA/updating-b9s.txt +++ b/_pages/af_ZA/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/ar_SA/a9lh-to-b9s.txt b/_pages/ar_SA/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/ar_SA/a9lh-to-b9s.txt +++ b/_pages/ar_SA/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt b/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ar_SA/home.txt b/_pages/ar_SA/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/ar_SA/home.txt +++ b/_pages/ar_SA/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/ar_SA/homebrew-launcher-(alternatives).txt b/_pages/ar_SA/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/ar_SA/homebrew-launcher-(alternatives).txt +++ b/_pages/ar_SA/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/ar_SA/homebrew-launcher-(soundhax).txt b/_pages/ar_SA/homebrew-launcher-(soundhax).txt index 8f6168725d..f8e1ee1b1d 100644 --- a/_pages/ar_SA/homebrew-launcher-(soundhax).txt +++ b/_pages/ar_SA/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound diff --git a/_pages/ar_SA/updating-b9s.txt b/_pages/ar_SA/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/ar_SA/updating-b9s.txt +++ b/_pages/ar_SA/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/ca_ES/a9lh-to-b9s.txt b/_pages/ca_ES/a9lh-to-b9s.txt index d81d275cc3..6dc1eeb2fd 100644 --- a/_pages/ca_ES/a9lh-to-b9s.txt +++ b/_pages/ca_ES/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt b/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt index 90bbbe89b0..d09c4dc8af 100644 --- a/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ca_ES/home.txt b/_pages/ca_ES/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/ca_ES/home.txt +++ b/_pages/ca_ES/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/ca_ES/homebrew-launcher-(alternatives).txt b/_pages/ca_ES/homebrew-launcher-(alternatives).txt index 7b3a6dd087..61d6eff612 100644 --- a/_pages/ca_ES/homebrew-launcher-(alternatives).txt +++ b/_pages/ca_ES/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Què necessiteu * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instruccions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/ca_ES/homebrew-launcher-(soundhax).txt b/_pages/ca_ES/homebrew-launcher-(soundhax).txt index 843a2ee37e..d0ddd27767 100644 --- a/_pages/ca_ES/homebrew-launcher-(soundhax).txt +++ b/_pages/ca_ES/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### Què necessiteu * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instruccions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound diff --git a/_pages/ca_ES/updating-b9s.txt b/_pages/ca_ES/updating-b9s.txt index 94712172dc..88383a35bf 100644 --- a/_pages/ca_ES/updating-b9s.txt +++ b/_pages/ca_ES/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/cs_CZ/a9lh-to-b9s.txt b/_pages/cs_CZ/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/cs_CZ/a9lh-to-b9s.txt +++ b/_pages/cs_CZ/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt b/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/cs_CZ/home.txt b/_pages/cs_CZ/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/cs_CZ/home.txt +++ b/_pages/cs_CZ/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/cs_CZ/homebrew-launcher-(alternatives).txt b/_pages/cs_CZ/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/cs_CZ/homebrew-launcher-(alternatives).txt +++ b/_pages/cs_CZ/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt index 8f6168725d..f8e1ee1b1d 100644 --- a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt +++ b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound diff --git a/_pages/cs_CZ/updating-b9s.txt b/_pages/cs_CZ/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/cs_CZ/updating-b9s.txt +++ b/_pages/cs_CZ/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/da_DK/a9lh-to-b9s.txt b/_pages/da_DK/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/da_DK/a9lh-to-b9s.txt +++ b/_pages/da_DK/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt b/_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/da_DK/home.txt b/_pages/da_DK/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/da_DK/home.txt +++ b/_pages/da_DK/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/da_DK/homebrew-launcher-(alternatives).txt b/_pages/da_DK/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/da_DK/homebrew-launcher-(alternatives).txt +++ b/_pages/da_DK/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/da_DK/homebrew-launcher-(soundhax).txt b/_pages/da_DK/homebrew-launcher-(soundhax).txt index 8f6168725d..f8e1ee1b1d 100644 --- a/_pages/da_DK/homebrew-launcher-(soundhax).txt +++ b/_pages/da_DK/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound diff --git a/_pages/da_DK/updating-b9s.txt b/_pages/da_DK/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/da_DK/updating-b9s.txt +++ b/_pages/da_DK/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/de_DE/a9lh-to-b9s.txt b/_pages/de_DE/a9lh-to-b9s.txt index a6c5c209e7..9e492dbba6 100644 --- a/_pages/de_DE/a9lh-to-b9s.txt +++ b/_pages/de_DE/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Drücke (HOME) um das Aktionsmenü aufzurufen 1. Wähle "More..." 1. Wähle "Scripts" diff --git a/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt b/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt index f18287e1dd..9fb082dc2b 100644 --- a/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/de_DE/home.txt b/_pages/de_DE/home.txt index 476cec78eb..23df1060dd 100644 --- a/_pages/de_DE/home.txt +++ b/_pages/de_DE/home.txt @@ -11,6 +11,9 @@ header: excerpt: "Eine vollständige Anleitung für 3DS Custom Firmware,
von original zu boot9strap.
" # --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} **Diese Anleitung ist _nur_ für Handelsübliche Konsolen (vom Endnutzer im Handel erworben; nicht aus dem Nintendo Entwickler Programm bezogen) gedacht! Wenn du eine Entwicklerkonsole ("PANDA" oder "SNAKE") besitzt, wirf einen Blick auf den [devGuide](https://dev.3ds.guide)**. @@ -24,9 +27,6 @@ Wenn du eine Entwicklerkonsole ("PANDA" oder "SNAKE") besitzt, wirf einen Blick **Diese Anleitung braucht *deine* Hilfe, um [diese](https://3ds.guide/rss.xml) Torrents zu seeden!**! {: .notice--success} -Bevor du fortfährst, lies alle Einleitungsseiten. -{: .notice--warning} - ## Was ist Homebrew? [**Homebrew**](https://de.wikipedia.org/wiki/Homebrew) bezeichnet für gewöhnlich Software, die nicht von Nintendo autorisiert wurde. Es erlaubt dir, Homebrew-Spiele, -Werkzeuge (wie beispielsweise Spielstandbearbeitung/-sicherung), oder Emulatoren für verschiedene ältere Konsolen laufen zu lassen. diff --git a/_pages/de_DE/homebrew-launcher-(alternatives).txt b/_pages/de_DE/homebrew-launcher-(alternatives).txt index b4825fbaf6..d31d95b66c 100644 --- a/_pages/de_DE/homebrew-launcher-(alternatives).txt +++ b/_pages/de_DE/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Was Du brauchst * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Anleitung 1. Schalte deinen 3DS aus 1. Stecke deine SD-Karte in deinen Computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an 1. Nutze einen der folgenden Eintrittpunkte um in den Homebrew Laucnher zu gelangen: diff --git a/_pages/de_DE/homebrew-launcher-(soundhax).txt b/_pages/de_DE/homebrew-launcher-(soundhax).txt index 504daf7d9d..865631bffb 100644 --- a/_pages/de_DE/homebrew-launcher-(soundhax).txt +++ b/_pages/de_DE/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ Das bedeutet, dass ein Karten-Update von einer Systemversion, die eine ältere V #### Was du brauchst * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Anleitung 1. Schalte deine Konsole aus 1. Stecke deine SD-Karte in deinen Computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an 1. Starte die Nintendo 3DS Sound App diff --git a/_pages/de_DE/updating-b9s.txt b/_pages/de_DE/updating-b9s.txt index 8441b9fbc1..2696ae5ad1 100644 --- a/_pages/de_DE/updating-b9s.txt +++ b/_pages/de_DE/updating-b9s.txt @@ -51,6 +51,9 @@ Es gibt Berichte über eine Welle von Sperren, die von Nintendo für CFW-Nutzer ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Starte GodMode9, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst 1. Wenn du aufgefordert wirst, ein "essential files backup" durchzuführen, drücke (A). Drücke erneut (A) nachdem es abgeschlossen ist 1. Drücke (HOME) um das Aktionsmenü aufzurufen diff --git a/_pages/el_GR/a9lh-to-b9s.txt b/_pages/el_GR/a9lh-to-b9s.txt index 85d9649951..4f4f1ebffa 100644 --- a/_pages/el_GR/a9lh-to-b9s.txt +++ b/_pages/el_GR/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt b/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt index 81f6e1a1f7..17691e1d11 100644 --- a/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/el_GR/home.txt b/_pages/el_GR/home.txt index 5122c88cff..f6a34447d5 100644 --- a/_pages/el_GR/home.txt +++ b/_pages/el_GR/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## Τι είναι το Homebrew; Ο όρος [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) συνήθως αναφέρεται σε λογισμικό το οποίο δεν είναι εξουσιοδοτημένο από την Nintendo. Σας επιτρέπει να τρέξετε homebrew παιχνίδια, εργαλεία όπως επεξεργασία αρχείων save και αντιγράφων ασφαλείας και emulators για διάφορα παλαιότερα συστήματα. diff --git a/_pages/el_GR/homebrew-launcher-(alternatives).txt b/_pages/el_GR/homebrew-launcher-(alternatives).txt index 1ca8612b04..859c0f65cb 100644 --- a/_pages/el_GR/homebrew-launcher-(alternatives).txt +++ b/_pages/el_GR/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Τι χρειάζεστε * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Οδηγίες 1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/el_GR/homebrew-launcher-(soundhax).txt b/_pages/el_GR/homebrew-launcher-(soundhax).txt index aaa9929495..d438a175d1 100644 --- a/_pages/el_GR/homebrew-launcher-(soundhax).txt +++ b/_pages/el_GR/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### Τι χρειάζεστε * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Οδηγίες 1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Εκκινήστε την εφαρμογή Nintendo 3DS Sound diff --git a/_pages/el_GR/updating-b9s.txt b/_pages/el_GR/updating-b9s.txt index 887b30bc45..0824649536 100644 --- a/_pages/el_GR/updating-b9s.txt +++ b/_pages/el_GR/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/en_PT/a9lh-to-b9s.txt b/_pages/en_PT/a9lh-to-b9s.txt index a866b0ddd9..a8fa720838 100644 --- a/_pages/en_PT/a9lh-to-b9s.txt +++ b/_pages/en_PT/a9lh-to-b9s.txt @@ -148,6 +148,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up th' action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt b/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt index 811b03f31f..1b5b86b414 100644 --- a/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/en_PT/home.txt b/_pages/en_PT/home.txt index ccb3fc7e2e..80c901276d 100644 --- a/_pages/en_PT/home.txt +++ b/_pages/en_PT/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What be Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/en_PT/homebrew-launcher-(alternatives).txt b/_pages/en_PT/homebrew-launcher-(alternatives).txt index b1309ff45d..95659bb9ef 100644 --- a/_pages/en_PT/homebrew-launcher-(alternatives).txt +++ b/_pages/en_PT/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off ye device 1. Insert ye SD card into ye computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert ye SD card into ye device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/en_PT/homebrew-launcher-(soundhax).txt b/_pages/en_PT/homebrew-launcher-(soundhax).txt index 23e3fbbfe0..4cf8c9e914 100644 --- a/_pages/en_PT/homebrew-launcher-(soundhax).txt +++ b/_pages/en_PT/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Th' Homebrew Launcher has many different entrypoints, or methods 'o launchin'. Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure ye device's Wireless Communication be turned on as udsploit (used in th' next page) gunna need th' wireless module to be active to function, 'n some devices (New 3DS, New 2DS, 'n Old 2DS) cannot adjust th' Wireless Communication setting from th' Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,33 +19,17 @@ Note that Cart Updates will only deliver updates to core features, such as the S #### What ye need -* Th' Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* Th' latest release 'o [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Th' latest release 'o [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not th' `devkit` file, not th' `ntr` file)* - -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert ye SD card into ye computer -1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card +1. Copy `boot.3dsx` (OCS) to the root of your SD card 1. Copy the Soundhax `.m4a` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card -1. Create a folder named `boot9strap` on th' root 'o ye SD card -1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound @@ -58,15 +42,11 @@ Note that Cart Updates will only deliver updates to core features, such as the S 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries + If it freezes, just force the console to power off by holding the power button, then try again - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/en_PT/updating-b9s.txt b/_pages/en_PT/updating-b9s.txt index 9e62041e17..96e72ab646 100644 --- a/_pages/en_PT/updating-b9s.txt +++ b/_pages/en_PT/updating-b9s.txt @@ -51,6 +51,9 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holdin' (Start) durin' boot 1. If ye be prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up th' action menu diff --git a/_pages/es_ES/a9lh-to-b9s.txt b/_pages/es_ES/a9lh-to-b9s.txt index 2b0cfd4cb6..75c084cefc 100644 --- a/_pages/es_ES/a9lh-to-b9s.txt +++ b/_pages/es_ES/a9lh-to-b9s.txt @@ -148,6 +148,9 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m ##### Sección VIII - Limpiar tarjeta SD +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Presiona el botón (Home) para abrir el menú de acción 1. Selecciona "Mas..." 1. Selecciona "Scripts..." diff --git a/_pages/es_ES/finalizing-setup.txt b/_pages/es_ES/finalizing-setup.txt index 5f92028884..ed7dfc917b 100644 --- a/_pages/es_ES/finalizing-setup.txt +++ b/_pages/es_ES/finalizing-setup.txt @@ -8,7 +8,7 @@ El archivo `boot.firm` es el que ejecuta boot9strap después de que termina de c En este caso, utilizamos Luma3DS de [AuroraWright](https://github.com/AuroraWright/) para ejecutar al inicio un SysNAND modificado directamente, permitiéndonos saltar la necesidad de cualquier EmuNAND, simplificando enormemente el uso de una 3DS hackeada además de ahorrar espacio en la tarjeta SD. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS will need to download some files on your device. +Asegúrate de que tu consola tenga la Comunicación inalámbrica habilitada y que esté conectada a internet. OCS requerirá descargar algunos archivos en tu consola. Durante este proceso, también instalaremos programas como los siguientes: @@ -20,7 +20,7 @@ Durante este proceso, también instalaremos programas como los siguientes: #### Instrucciones -##### Section I - Updating the System +##### Sección I - Actualizar el sistema Si, mientras seguías una versión anterior de esta guía, hiciste CTRTransfer de tu *New 3DS* a 2.1.0, ahora es el momento de [restaurar tu copia de seguridad de la NAND](godmode9-usage#nand_restore) antes de hacer esta sección. {: .notice--danger} @@ -33,7 +33,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática" + Si esto te sigue dando un error, [sigue CTRTransfer](ctrtransfer), luego reintenta actualizar -##### Section II - Launching OCS +##### Sección II - Iniciar OCS 1. Inicia la aplicación de Modo Descarga 1. Presiona (L) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina @@ -44,21 +44,21 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m 1. Presiona (B) para salir del menú de Rosalina 1. Presiona (Home), luego cierra la aplicación de Modo Descarga 1. Inicia la aplicación de Modo Descarga -1. Your device should load OCS +1. Tu consola debería cargar OCS -##### Section III - OCS +##### Sección III - OCS -1. Press (A) to begin -1. Wait for the downloads and installs to complete -1. Press (Start) to exit when prompted +1. Presiona (A) para empezar +1. Espera a que se completen las descargas y las instalaciones +1. Presiona (Start) cuando se te pida 1. Presiona (Home), luego cierra la aplicación de Modo Descarga -##### Section IV - DSP Dump +##### Sección IV - Volcado de DSP 1. Inicia la aplicación DSP1 1. Una vez que se haya completado, presiona (B) para que la aplicación se elimine a sí misma y regresar al menú HOME -##### Section V - CTRNAND Luma3DS +##### Sección V - CTRNAND Luma3DS 1. Inicia GodMode9 manteniendo presionado (Start) mientras enciendes la consola 1. Si se te pide crear copias de seguridad de archivos esenciales, presiona (A) para hacerlo y luego presiona (A) para continuar una vez que haya terminado @@ -71,7 +71,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m 1. Presiona (A) para continuar 1. Presiona (A) para volver a bloquear los permisos de escritura -##### Section VI - Backup SysNAND +##### Sección VI - Copia de seguridad de la SysNAND 1. Presiona el botón (Home) para abrir el menú de acción 1. Selecciona "Mas..." @@ -88,7 +88,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m 1. Elimina el archivo `_nandmin_###.bin` de la carpeta `/gm9/out/` de tu tarjeta SD después de haberlo copiado 1. Vuelve a insertar tu tarjeta SD en tu consola -##### Section VII - Cleanup SD Card +##### Sección VII - Limpieza de la tarjeta SD 1. Presiona el botón (Home) para abrir el menú de acción 1. Selecciona "Mas..." diff --git a/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt b/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt index 649492408d..f21ea56b6f 100644 --- a/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Ten en cuenta que versiones más recientes del firmware de 3DS han bloqueado el + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flasheo en un clon de flashcart podría dejarla **permanentemente inutilizable**. Esto es poco probable, pero sin embargo, sólo las flashcarts originales mencionadas son compatibles. Para reducir la posibilidad de recibir un clon, se recomienda que utilizar un sitio de confianza para comprar una flashcart (como [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/es_ES/home.txt b/_pages/es_ES/home.txt index 9ba18d07fe..88677e8486 100644 --- a/_pages/es_ES/home.txt +++ b/_pages/es_ES/home.txt @@ -11,6 +11,9 @@ header: excerpt: "Una guía completa de custom firmware para 3DS,
desde stock a boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} ¡Esta guía es _sólo_ para consolas retail (compradas en tiendas), no para consolas del Nintendo Developer Program! Si posees una consola de desarrollador ("PANDA" o "SNAKE"), echa un vistazo a [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ Si posees una consola de desarrollador ("PANDA" o "SNAKE"), echa un vistazo a [d ¡Esta guía necesita *tu* ayuda para compartir [estos](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Lee todas las páginas introductorias antes de continuar. -{: .notice--warning} - ## ¿Qué es Homebrew? [**Homebrew**](https://es.wikipedia.org/wiki/Homebrew) suele referirse a software no autorizado por Nintendo. Esto te permite ejecutar varios juegos caseros, herramientas para editar y respaldar partidas y emuladores de varios sistemas antiguos. diff --git a/_pages/es_ES/homebrew-launcher-(alternatives).txt b/_pages/es_ES/homebrew-launcher-(alternatives).txt index 82d9e3c749..dc6b5d1cbe 100644 --- a/_pages/es_ES/homebrew-launcher-(alternatives).txt +++ b/_pages/es_ES/homebrew-launcher-(alternatives).txt @@ -6,17 +6,19 @@ El Homebrew Launcher tiene diferentes puntos de entrada, o métodos para ejecuta Si browserhax no es una opción (revisa la tabla de abajo), no posees ninguno de estos juegos y no tienes otra 3DS con acceso al Homebrew Launcher, la opción más barata es comprar una copia "Nintendo Selects" de [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (asegúrate de conseguir el cartucho correcto para tu región) y un [Powersaves](https://amzn.to/2fb3VY7) (compatible con todas las regiones), luego usa oot3dhax de la lista de abajo. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. +Asegúrate de que tu consola tenga la Comunicación inalámbrica habilitada y que esté conectada a internet. OCS (aplicación a utilizar en la próxima página) requerirá descargar algunos archivos en tu consola. #### Qué necesitas -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instrucciones 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola 1. Utiliza uno de los siguientes puntos de entrada alternativos para acceder al Homebrew Launcher: @@ -50,7 +52,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the -1. Your device should load OCS +1. Tu consola debería cargar OCS Continúa en [Instalar boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher)) {: .notice--primary} diff --git a/_pages/es_ES/homebrew-launcher-(soundhax).txt b/_pages/es_ES/homebrew-launcher-(soundhax).txt index d3f6ca1681..8a9454b0d1 100644 --- a/_pages/es_ES/homebrew-launcher-(soundhax).txt +++ b/_pages/es_ES/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ El Homebrew Launcher tiene diferentes puntos de entrada, o métodos para ejecuta Soundhax es compatible con las versiones 9.0.0 hasta la 11.3.0 en las regiones EUR, JPN, KOR y USA. -Asegúrate de que la Comunicación inalámbrica de tu dispositivo está encendida, ya que udsploit (usado en la siguiente página) necesitará que el módulo inalámbrico esté activado para funcionar. Algunos dispositivos (New 3DS, New 2DS y Old 2DS) no pueden ajustar la Comunicación inalámbrica desde el Hombrew Launcher. La Comunicación inalámbrica sólo debe estar activada; no es necesario conectarse a una red. +Asegúrate de que tu consola tenga la Comunicación inalámbrica habilitada y que esté conectada a internet. OCS (aplicación a utilizar en la próxima página) requerirá descargar algunos archivos en tu consola. {% capture notice-1 %} @@ -19,33 +19,17 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme #### Qué necesitas -* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) -* La última versión de [Soundhax](http://soundhax.com/) *(correspondiente a tu consola y región)* -* La última versión de [SafeB9SInstaller] -(https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* -* La última versión de [safehax](https://github.com/TiniVi/safehax/releases/latest) -* La última versión de [udsploit](https://github.com/smealum/udsploit/releases/latest) -* La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)* -* El [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(correspondiente a tu versión del sistema y región)* +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instrucciones 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copia _el contenido de_ `starter.zip` a la raíz de tu tarjeta SD -1. Copia el archivo `.m4a` de Soundhax en la raíz de tu tarjeta SD -1. Copia el otherapp payload a la raíz de tu tarjeta SD y cambia su nombre a `otherapp.bin` -1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD -1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD -1. Copia `safehax.3dsx` a la carpeta `/3ds/` en tu tarjeta SD -1. Copia `udsploit.3dsx` a la carpeta `/3ds/` en tu tarjeta SD -1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD y renombra `SafeB9SInstaller.bin` a `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola 1. Inicia Nintendo 3DS Sound @@ -58,15 +42,11 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme 1. Ve a `/SDCARD`, y luego reproduce "<3 nedwill 2016" + Esto podría tomar varios intentos + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar - + Si la pantalla se queda en rojo, asegúrate de haber copiado _los contenidos_de_la carpeta `starter` a la raíz de tu tarjeta SD ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Tu consola debería cargar el Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Tu consola debería cargar OCS ___ diff --git a/_pages/es_ES/installing-boot9strap-(2xrsa).txt b/_pages/es_ES/installing-boot9strap-(2xrsa).txt index 0b9effeb65..6fb4003edb 100644 --- a/_pages/es_ES/installing-boot9strap-(2xrsa).txt +++ b/_pages/es_ES/installing-boot9strap-(2xrsa).txt @@ -8,7 +8,7 @@ title: "Instalar boot9strap (2xrsa)" (https://github.com/d0k3/SafeB9SInstaller/releases/latest) * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Instrucciones @@ -16,7 +16,7 @@ title: "Instalar boot9strap (2xrsa)" 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD 1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD diff --git a/_pages/es_ES/installing-boot9strap-(browser).txt b/_pages/es_ES/installing-boot9strap-(browser).txt index ed6eb5b650..65a799c7ff 100644 --- a/_pages/es_ES/installing-boot9strap-(browser).txt +++ b/_pages/es_ES/installing-boot9strap-(browser).txt @@ -10,7 +10,7 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía (https://github.com/d0k3/SafeB9SInstaller/releases/latest) * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Instrucciones @@ -18,7 +18,7 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD 1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD diff --git a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt index 0c67324653..52753d2267 100644 --- a/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt +++ b/_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt @@ -27,7 +27,7 @@ Antes de proceder, asegúrate de leer todos los avisos y advertencias al [Instal * La última versión de [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) * El archivo `.firm` 11.4.0 / 11.5.0 (ámbas versiones tienen la misma versión FIRM) correspondiente a **la 3DS de destino** (ya sea "OLD" para Old 3DS, o "NEW" para New 3DS): + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -136,7 +136,7 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD 1. Copia `boot.nds` (B9STool) a la raíz de la tarjeta SD de **la 3DS de destino** -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. Copia `boot.3dsx` (OCS) a la raíz de la tarjeta SD de **la 3DS de destino** 1. Crea una carpeta llamada `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino** 1. Copia el archivo 11.5.0 `.firm` correspondiente a **la 3DS de destino** a la carpeta `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino** 1. Copia el archivo `boot9strap.firm` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD diff --git a/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt b/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt index 4175eb5d2f..48d87017e8 100644 --- a/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt +++ b/_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt @@ -26,7 +26,7 @@ Antes de proceder, asegúrate de leer todos los avisos y advertencias al [Instal * La última versión de [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) * El archivo `.firm` 11.4.0 / 11.5.0 (ámbas versiones tienen la misma versión FIRM) correspondiente a **la 3DS de destino** (ya sea "OLD" para Old 3DS, o "NEW" para New 3DS): + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -142,7 +142,7 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD 1. Copia `boot.nds` (B9STool) a la raíz de la tarjeta SD de **la 3DS de destino** -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. Copia `boot.3dsx` (OCS) a la raíz de la tarjeta SD de **la 3DS de destino** 1. Crea una carpeta llamada `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino** 1. Copia el archivo 11.5.0 `.firm` correspondiente a **la 3DS de destino** a la carpeta `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino** 1. Copia el archivo `boot9strap.firm` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD diff --git a/_pages/es_ES/installing-boot9strap-(hardmod).txt b/_pages/es_ES/installing-boot9strap-(hardmod).txt index 8d271b6b9d..bba2b95b82 100644 --- a/_pages/es_ES/installing-boot9strap-(hardmod).txt +++ b/_pages/es_ES/installing-boot9strap-(hardmod).txt @@ -17,7 +17,7 @@ Esto funcionará en New 3DS, New 2DS, Old 3DS, y Old 2DS en *todas* las versione * La última versión de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Los usuarios de Windows pueden usar el `.exe` compilado, mientras que los usuarios de Mac y Linux necesitarán tener [Python 3](https://www.python.org/downloads/) instalado para ejecutar el `.py` * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) * El archivo `.firm` correspondiente a tu consola y versión: | Versión(es) | Kernel | Old 3DS u Old 2DS | New 3DS o New 2DS | @@ -54,7 +54,7 @@ Esto funcionará en New 3DS, New 2DS, Old 3DS, y Old 2DS en *todas* las versione ##### Sección I - Preparativos -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD 1. Copia la carpeta hardmod-b9s-installer desde el `.zip` de hardmod-b9s-installer a tu computadora 1. Copia el `.firm` descargado a la carpeta hardmod-b9s-installer en tu computadora diff --git a/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt b/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt index aabaef4a85..64a60e6572 100644 --- a/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt +++ b/_pages/es_ES/installing-boot9strap-(homebrew-launcher).txt @@ -6,14 +6,14 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía #### Instrucciones -##### Section I - OCS +##### Sección I - OCS -1. Press (A) to begin -1. Wait for the downloads to complete -1. Wait for the exploit to run +1. Presiona (A) para empezar +1. Espera a que se completen las descargas +1. Espera a que se ejecute el exploit + Esto puede tomar varios intentos - + If it freezes, just force the console to power off by holding the power button, then relaunch OCS to try again - + If you get a "PM INIT FAILED" error, try replacing the `safehax.3dsx` file in the `/3ds/` folder on your SD card with the one from the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19) + + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón de apagado y luego ejecuta OCS otra vez para intentar de nuevo + + Si aparece como error "PM INIT FAILED", intenta reemplazar el archivo `safehax.3dsx` en la carpeta `/3ds/` de tu tarjeta SD con el archivo encontrable en [la versión r19 de safehax](https://github.com/TiniVi/safehax/releases/tag/r19) 1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller ##### Sección II - Instalar boot9strap diff --git a/_pages/es_ES/installing-boot9strap-(mset).txt b/_pages/es_ES/installing-boot9strap-(mset).txt index f8c17d12bd..d271a8bb5a 100644 --- a/_pages/es_ES/installing-boot9strap-(mset).txt +++ b/_pages/es_ES/installing-boot9strap-(mset).txt @@ -9,7 +9,7 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) * Cualquier flashcart de DS que funcione en la versión de tu consola #### Instrucciones @@ -18,7 +18,7 @@ Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD 1. Copia los archivos `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD diff --git a/_pages/es_ES/installing-boot9strap-(ntrboot).txt b/_pages/es_ES/installing-boot9strap-(ntrboot).txt index a9e01909b5..49ce5847c8 100644 --- a/_pages/es_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/es_ES/installing-boot9strap-(ntrboot).txt @@ -10,7 +10,7 @@ title: "Instalar boot9strap (ntrboot)" (https://github.com/d0k3/SafeB9SInstaller/releases/latest) * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* La última versión de [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Instrucciones @@ -18,7 +18,7 @@ title: "Instalar boot9strap (ntrboot)" 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia `boot.3dsx` (OCS) a la raíz de tu tarjeta SD 1. Copia `SafeB9SInstaller.firm` a la raíz de tu tarjeta SD y renombra el archivo a `boot.firm` 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD 1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD diff --git a/_pages/es_ES/updating-b9s.txt b/_pages/es_ES/updating-b9s.txt index 5f0cd23204..8f5483eb9a 100644 --- a/_pages/es_ES/updating-b9s.txt +++ b/_pages/es_ES/updating-b9s.txt @@ -51,6 +51,9 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo existente ##### Sección III - Limpiar tarjeta SD +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Inicia GodMode9 manteniendo presionado (Start) mientras enciendes la consola 1. Si se te pide crear copias de seguridad de archivos esenciales, presiona (A) para hacerlo y luego presiona (A) para continuar una vez que haya terminado 1. Presiona el botón (Home) para abrir el menú de acción diff --git a/_pages/fi_FI/a9lh-to-b9s.txt b/_pages/fi_FI/a9lh-to-b9s.txt index 84398f8174..64004635d8 100644 --- a/_pages/fi_FI/a9lh-to-b9s.txt +++ b/_pages/fi_FI/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais ##### Vaihe VIII – SD-kortin siivoaminen +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon 1. Valitse "More..." 1. Valitse "Scripts..." diff --git a/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt b/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt index 57760978cd..bf5316dfd8 100644 --- a/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Huomaa, että joidenkin flash-korttien käyttö on estetty 3DS:n uudemmilla jär + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **vioittaa** jäljitelmä-flash-korttia ja tehdä siitä pysyvästi käyttökelvottoman. Vaikka tämä onkin epätodennäköistä, on suositeltavaa käyttää vain alkuperäisiä kortteja. Jotta välttyisit jäljitelmäkortin saamiselta, on suositeltavaa käyttää flash-kortin ostamiseen hyvämaineista sivustoa (kuten [NDS Card](http://www.nds-card.com/)ia). {: .notice--danger} diff --git a/_pages/fi_FI/get-started-(new-3ds).txt b/_pages/fi_FI/get-started-(new-3ds).txt index 0aac8ac698..7da284b0f4 100644 --- a/_pages/fi_FI/get-started-(new-3ds).txt +++ b/_pages/fi_FI/get-started-(new-3ds).txt @@ -56,7 +56,7 @@ Konsolisi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksiss Kaikki versiot
-

ntrboot
(vaatii yhteensopivan flash-kortin)

tai

Boot9strapin asentaminen (laitteistomodaus)
(vaatii juottamista)

+

Ntrboot
(vaatii yhteensopivan flash-kortin)

tai

Boot9strapin asentaminen (laitteistomodaus)
(vaatii juottamista)

diff --git a/_pages/fi_FI/get-started-(old-3ds).txt b/_pages/fi_FI/get-started-(old-3ds).txt index b513a50396..c81dea5182 100644 --- a/_pages/fi_FI/get-started-(old-3ds).txt +++ b/_pages/fi_FI/get-started-(old-3ds).txt @@ -91,7 +91,7 @@ Jos päivitit pelikortilla, joka sisältää 9.9.0:n tai sitä uudemman version Kaikki versiot
-

ntrboot
(vaatii yhteensopivan flash-kortin)

tai

Boot9strapin asentaminen (laitteistomodaus)
(vaatii juottamista)

+

Ntrboot
(vaatii yhteensopivan flash-kortin)

tai

Boot9strapin asentaminen (laitteistomodaus)
(vaatii juottamista)

\ No newline at end of file diff --git a/_pages/fi_FI/home.txt b/_pages/fi_FI/home.txt index c9b0808442..791ce2da1d 100644 --- a/_pages/fi_FI/home.txt +++ b/_pages/fi_FI/home.txt @@ -11,6 +11,9 @@ header: excerpt: "Perusteellinen opas 3DS:n mukautettuun laiteohjelmistoon,
vakio-ohjelmistosta boot9strapiin.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} Tämä opas on _vain_ normaaleille (kuluttajan ostama; ei Nintendon kehittäjäohjelmasta) konsoleille! Jos sinulla on kehittäjäkonsoli ("PANDA" tai "SNAKE"), tutustu [devGuide](https://dev.3ds.guide)en. @@ -24,9 +27,6 @@ Tämä opas tarvitsee *sinun* apuasi sen [kääntämisessä](https://translate.3 Tämä opas tarvitsee *sinun* apuasi [näiden](https://3ds.guide/rss.xml) torrentien jakamisessa! {: .notice--success} -Lue kaikki johdantosivut ennen aloittamista. -{: .notice--warning} - ## Mikä on homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) viittaa yleensä ohjelmistoon, joka ei ole Nintendon hyväksymä. Se mahdollistaa kotitekoisten pelien, työkalujen (kuten tallennusten muokkaus ja varmuuskopiointi) ja emulaattoreiden käyttämisen. @@ -69,7 +69,7 @@ Luettelon kaikista lasketuista sighaxin allekirjoituksista (joiden päälle boot ## Mitä minun täytyy tietää ennen aloittamista? + **Ennen oppaan aloittamista sinun on tiedettävä 3DS-hakkeroinnin riskit: JOKA kerta, kun muokkaat konsoliasi, on mahdollisuus siihen, että se vioittuu PYSYVÄSTI. Vaikka tämä onkin hyvin epätodennäköistä, seuraa KAIKKIA ohjeita TARKALLEEN.** -+ Jos olet jo hakkeroinut konsolisi EmuNAND-kokoonpanoa varten, ja haluat siirtää sisältösi uuteen SysNAND-CFW-kokoonpanoon, seuraa kaikkia ohjeita ja palauta EmuNAND osiossa [Asennuksen viimeistely](installing-arm9loaderhax), siinä vaiheessa kun ohje siihen kehottaa. ++ Jos olet jo hakkeroinut konsolisi EmuNAND-kokoonpanoa varten, ja haluat siirtää sisältösi uuteen SysNAND-CFW-kokoonpanoon, seuraa kaikkia ohjeita ja palauta EmuNAND osiossa [Asennuksen viimeistely](finalizing-setup), siinä vaiheessa kun ohje siihen kehottaa. + Tämä opas toimii New 3DS:llä, vanhalla 3DS:llä, New 2DS:llä sekä vanhalla 2DS:llä kaikilla alueilla, laiteohjelmistolla 11.5.0 tai sitä vanhemmilla versioilla. + Jos kaikki menee suunnitelmien mukaan, et menetä mitään tietoja ja päädyt samaan kokoonpanoon, joka sinulla oli alussa (pelit, NNID, tallennukset jne. säilyvät). + **Pidä konsolisi latauksessa koko prosessin ajan välttyäksesi tietojen menettämiseltä tai odottamattomasta sammumisesta aiheutuvalta vahingolta!** diff --git a/_pages/fi_FI/homebrew-launcher-(alternatives).txt b/_pages/fi_FI/homebrew-launcher-(alternatives).txt index 69ea1b3e64..812ca9eb64 100644 --- a/_pages/fi_FI/homebrew-launcher-(alternatives).txt +++ b/_pages/fi_FI/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Tarpeet * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Ohjeet 1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi 1. Käytä jotakin seuraavista käynnistystavoista päästäksesi Homebrew Launcheriin: diff --git a/_pages/fi_FI/homebrew-launcher-(soundhax).txt b/_pages/fi_FI/homebrew-launcher-(soundhax).txt index 468c4c3ee6..93c2c8ed19 100644 --- a/_pages/fi_FI/homebrew-launcher-(soundhax).txt +++ b/_pages/fi_FI/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ Tämä tarkoittaa sitä, että korttipäivityksen tekeminen versiolta, jolla on #### Tarpeet * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Ohjeet 1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi 1. Avaa Nintendo 3DS Sound diff --git a/_pages/fi_FI/updating-b9s.txt b/_pages/fi_FI/updating-b9s.txt index f6aca48eca..2dc1377789 100644 --- a/_pages/fi_FI/updating-b9s.txt +++ b/_pages/fi_FI/updating-b9s.txt @@ -51,6 +51,9 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih ##### Vaihe III – SD-kortin siivoaminen +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Avaa GodMode9 pitämällä (START)-painiketta pohjassa konsolin käynnistyessä 1. Jos ohjelma kehottaa luomaan varmuuskopion tärkeistä tiedostoista (essential files), paina (A):ta tehdäksesi sen, ja kun varmuuskopio on valmis, paina (A):ta uudelleen jatkaaksesi 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon diff --git a/_pages/fr_FR/a9lh-to-b9s.txt b/_pages/fr_FR/a9lh-to-b9s.txt index 53a8c4ce3b..a5990bbb20 100644 --- a/_pages/fr_FR/a9lh-to-b9s.txt +++ b/_pages/fr_FR/a9lh-to-b9s.txt @@ -148,6 +148,9 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou ##### Section VIII - Nettoyer la Carte SD +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu) 1. Sélectionnez "More..." 1. Sélectionnez "Scripts" diff --git a/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt b/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt index 9a421538fa..f0095759e7 100644 --- a/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inutilsable . C'est peu probable , mais notez que seule les originaux fonctionnent avec Ntrboot . Pour réduire les chances d'avoir une contrefaçon utilisez ([NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/fr_FR/home.txt b/_pages/fr_FR/home.txt index 55caaefff4..50eed4ae59 100644 --- a/_pages/fr_FR/home.txt +++ b/_pages/fr_FR/home.txt @@ -11,6 +11,9 @@ header: excerpt: "Un guide complet pour le custom firmware de 3DS,
depuis le firmware original vers boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} Ce guide est destiné aux consoles grand public (achetées par un consommateur; pas issues du Programme Développeur de Nintendo) _uniquement_! Si vous avez une console développeur ("PANDA" ou "SNAKE"), dirigez vous vers le [guide développeur](https://dev.3ds.guide). @@ -24,9 +27,6 @@ Ce guide a besoin de *votre* aide afin d'être [traduit](https://translate.3ds.g Ce guide a besoin de *votre* aide pour partager [ces](https://3ds.guide/rss.xml) fichiers torrents! {: .notice--success} -Lisez toutes les pages d'introduction avant de commencer. -{: .notice--warning} - ## Qu'est-ce qu'un Homebrew ? Les [**Homebrew**](http://goo.gl/fXgk5v) désignent généralement des logiciels qui ne sont pas autorisés par Nintendo. Cela vous permet de lancer des jeux créés par la communauté, des outils comme des éditeurs de sauvegarde et des émulateurs pour tout un tas de consoles rétro. diff --git a/_pages/fr_FR/homebrew-launcher-(alternatives).txt b/_pages/fr_FR/homebrew-launcher-(alternatives).txt index 8031cf9c0e..970d8c836c 100644 --- a/_pages/fr_FR/homebrew-launcher-(alternatives).txt +++ b/_pages/fr_FR/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Ce dont vous aurez besoin * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez à présent votre 3DS 1. Utilisez un de ces points d'accès alternatifs suivants pour entrer dans l'Homebrew Launcher: diff --git a/_pages/fr_FR/homebrew-launcher-(soundhax).txt b/_pages/fr_FR/homebrew-launcher-(soundhax).txt index 4b2ee0b1e6..971b5bd5fc 100644 --- a/_pages/fr_FR/homebrew-launcher-(soundhax).txt +++ b/_pages/fr_FR/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ Cela signifie qu'à l'aide d'une Mise à jour par Cartouche depuis une version #### Ce dont vous aurez besoin * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Retirez la carte SD de votre ordinateur et réinsérez-là dans votre 3DS 1. Allumez à présent votre 3DS 1. Lancez l'application Studio Son Nintendo 3DS diff --git a/_pages/fr_FR/updating-b9s.txt b/_pages/fr_FR/updating-b9s.txt index 973622a0d0..f9bd5b9af5 100644 --- a/_pages/fr_FR/updating-b9s.txt +++ b/_pages/fr_FR/updating-b9s.txt @@ -51,6 +51,9 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Ouvrez Godmode9 en maintenant (Start) au démarrage 1. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois qu’elle a complété 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu) diff --git a/_pages/he_IL/a9lh-to-b9s.txt b/_pages/he_IL/a9lh-to-b9s.txt index 8b48be8969..1b15cf35f4 100644 --- a/_pages/he_IL/a9lh-to-b9s.txt +++ b/_pages/he_IL/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ title: "A9LH אל B9S" ##### חלק VIII - ניקוי ה SD +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. תלחצו על (Home) כדי להראות את תפריט הפעולה 1. תבחרו ב"More..." 1. תבחרו "Scripts..." diff --git a/_pages/he_IL/finalizing-setup.txt b/_pages/he_IL/finalizing-setup.txt index 24cb0bada7..4942ef6d9b 100644 --- a/_pages/he_IL/finalizing-setup.txt +++ b/_pages/he_IL/finalizing-setup.txt @@ -8,7 +8,7 @@ title: "סיום התהליך" לכן, נשתמש ב-Luma3DS מאת [AuroraWright](https://github.com/AuroraWright/) על מנת לעשות בוט לתוך SysNAND מותאם ישירות, דבר אשר מאפשר לנו לעקוף לחלוטין כל צורך של EmuNAND ובכך לפשט את השימוש ב-3DS פרוץ במקביל לחסכון בנפח ה-SD. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS will need to download some files on your device. +תבדקו שהתקשורת האלחוטית של הקונסולה שלכם דלוקה ומחוברת לאינטרנט. OCS יצטרך להוריד כמה קבצים על הקונסולה שלכם. בתהליך זה, גם נתקין את התוכנות הבאות: @@ -20,7 +20,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### הוראות -##### Section I - Updating the System +##### חלק I - עדכון המערכת אם, במהלך שעקבתם אחרי גרסה ישנה של המדריך, שנמכתם את ה*New 3DS* שלכם לגרסא 2.1.0, עכשיו זה הזמן [לשחזר את הגיבוי שלכם](godmode9-usage#nand_restore) לפני שאתם עושים את החלק הזה. {: .notice--danger} @@ -33,7 +33,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto" + אם זה ממשיך לתת לכם שגיאה, [עקבו אחרי CTRTransfer](ctrtransfer), ואז תנסו לעדכן שוב -##### Section II - Launching OCS +##### חלק II - הפעלת OCS 1. תפעילו את Download Play 1. תלחצו (L) + (Down) + (Select) באותו זמן כדי לפתוח את התפריט של Rosalina @@ -44,21 +44,21 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. תלחצו (B) כדי לצאת מהתפריט של Rosalina 1. תלחצו על (Home), ואז תסגרו את Download Play 1. תפעילו את Download Play -1. Your device should load OCS +1. הקונסולה שלכם אמורה לטעון את OCS -##### Section III - OCS +##### חלק III - OCS -1. Press (A) to begin -1. Wait for the downloads and installs to complete -1. Press (Start) to exit when prompted +1. תלחצו (A) כדי להתחיל +1. תחכו לכל ההורדות וההתקנות להסתיים +1. תלחצו (Start) כדי לצאת כשמבקשים ממכם 1. תלחצו על (Home), ואז תסגרו את Download Play -##### Section IV - DSP Dump +##### חלק IV - DSP Dump 1. תפעילו את DSP1 1. אחרי שזה סיים, תלחצו (B) כדי למחוק את התוכנה ולחזור למסך הבית -##### Section V - CTRNAND Luma3DS +##### חלק V - Luma3DS על ה- CTRNAND 1. תפתחו את GodMode9 על ידי החזקה של המקש (Start) בעת ההדלקה 1. אם תתבקשו לעשות גיבוי של קבצים חיוניים, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך אחרי שזה סיים @@ -71,7 +71,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. תלחצו (A) כדי להמשיך 1. תלחצו (A) כדי לנעול הרשאות כתיבה -##### Section VI - Backup SysNAND +##### חלק VI - גיבוי SysNAND 1. תלחצו על (Home) כדי להראות את תפריט הפעולה 1. תבחרו ב"More..." @@ -88,7 +88,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. תמחקו את `_nandmin_###.bin` בתיקיה `/gm9/out/` על הSD לאחר שהעתקתם אותו 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם -##### Section VII - Cleanup SD Card +##### חלק VII - ניקוי ה SD 1. תלחצו על (Home) כדי להראות את תפריט הפעולה 1. תבחרו ב"More..." diff --git a/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt b/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt index 190dd2e1fd..a481380ebf 100644 --- a/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ title: "צריבת ntrboot (מערכת 3DS אחת)" + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + שימו לב שבמקרים נדירים, יתכן שתהליך הצריבה **ישבור** כרטיס פריצה מזוייף ויגרום לו לא לעבוד. זה לא סביר שייקרה, אבל בכל זאת רק כרטיסי פריצה מקוריים שמפורטים נתמכים. כדי להוריד את הסיכויים של להשיג כרטיס פריצה מזוייף, מומלץ להשתמש באתר אמין כדי לקנות את הכרטיס (כמו [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/he_IL/home.txt b/_pages/he_IL/home.txt index 424e452bad..ef0a9f2ab0 100644 --- a/_pages/he_IL/home.txt +++ b/_pages/he_IL/home.txt @@ -11,6 +11,9 @@ header: excerpt: "מדריך שלם לפריצת 3DS,
מהחנות עד ל boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} המדריך הזה הוא לקונסולות קמעוניות (כאלו שנקנו בחנות; לא כאלה מתוכנית המפתחים) בלבד! אם יש לכם קונסולת מפתחים, לכו ל[devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ excerpt: "מדריך שלם לפריצת 3DS,
מהחנות עד ל boot9s המדריך הזה צריך את העזרה *שלכם* בשביל סיד ל[טורנטים הבאים](https://3ds.guide/rss.xml)! {: .notice--success} -תקראו את כל הדפים המקדימים לפני שאתם ממשיכים. -{: .notice--warning} - ## מה זה Homebrew? המונח [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) מתייחס בדרך כלל לתוכנה שאינה מאושרת על ידי נינטנדו. זה מאפשר לכם להפעיל משחקי homebrew, כלים כמו עריכת וגיבוי שמירות, ואמולטורים למערכות יותר ישנות. diff --git a/_pages/he_IL/homebrew-launcher-(alternatives).txt b/_pages/he_IL/homebrew-launcher-(alternatives).txt index ff57a5c132..37961fd029 100644 --- a/_pages/he_IL/homebrew-launcher-(alternatives).txt +++ b/_pages/he_IL/homebrew-launcher-(alternatives).txt @@ -6,17 +6,19 @@ title: "Homebrew Launcher (אלטרנטיבות)" אם Browserhax הוא לא אופציה (תראו את הטבלה למטה), ואין לכם אחד המשחקים האלה כבר או מכשיר נוסף שיש לו גישה לHomebrew Launcher, האופציה הכי זולה היא לקנות עותק של [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (תוודאות שאתם קונים את העותק הנכון לגרסא שלכם) ומכשיר [Powersaves](https://amzn.to/2fb3VY7) (מתאים לכלל האיזורים), ואז לבחור בoot3dhax מהטבלה. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. +תבדקו שהתקשורת האלחוטית של הקונסולה שלכם דלוקה ומחוברת לאינטרנט. OCS (משומש בעמוד הבא) יצטרך להוריד כמה קבצים על הקונסולה שלכם. #### מה נדרש -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### הנחיות 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר 1. השתמשו באחד מהכניסות הבאות על מנת להפעיל את הHomebrew Launcher: @@ -50,7 +52,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the -1. Your device should load OCS +1. הקונסולה שלכם אמורה לטעון את OCS תמשיכו אל [התקנת boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher)) {: .notice--primary} diff --git a/_pages/he_IL/homebrew-launcher-(soundhax).txt b/_pages/he_IL/homebrew-launcher-(soundhax).txt index 7eba513c36..a85247cbc2 100644 --- a/_pages/he_IL/homebrew-launcher-(soundhax).txt +++ b/_pages/he_IL/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ title: "Homebrew Launcher (Soundhax)" SoundHax תומך בגירסאות 9.0.0 עד 11.3.0 באזורים EUR, JPN, KOR, וUSA. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. +תבדקו שהתקשורת האלחוטית של הקונסולה שלכם דלוקה ומחוברת לאינטרנט. OCS (משומש בעמוד הבא) יצטרך להוריד כמה קבצים על הקונסולה שלכם. {% capture notice-1 %} @@ -19,13 +19,17 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### מה נדרש -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### הוראות 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר 1. כנסו לנגן המוזיקה @@ -42,7 +46,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load OCS +1. הקונסולה שלכם אמורה לטעון את OCS ___ diff --git a/_pages/he_IL/installing-boot9strap-(2xrsa).txt b/_pages/he_IL/installing-boot9strap-(2xrsa).txt index 8956f0a9f6..ea1007f6eb 100644 --- a/_pages/he_IL/installing-boot9strap-(2xrsa).txt +++ b/_pages/he_IL/installing-boot9strap-(2xrsa).txt @@ -7,7 +7,7 @@ title: "התקנת boot9strap (2xrsa)" * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)* * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) #### הוראות @@ -15,7 +15,7 @@ title: "התקנת boot9strap (2xrsa)" 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם diff --git a/_pages/he_IL/installing-boot9strap-(browser).txt b/_pages/he_IL/installing-boot9strap-(browser).txt index 9e07506205..3908172fe4 100644 --- a/_pages/he_IL/installing-boot9strap-(browser).txt +++ b/_pages/he_IL/installing-boot9strap-(browser).txt @@ -9,7 +9,7 @@ title: "התקנת boot9strap (דפדפן)" * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)* * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) #### הוראות @@ -17,7 +17,7 @@ title: "התקנת boot9strap (דפדפן)" 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם diff --git a/_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt b/_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt index a1505e32a2..ad03d07618 100644 --- a/_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt +++ b/_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt @@ -27,7 +27,7 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)" * הגרסה העדכנית של [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)* * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) * קובץ ה `.firm` של 11.4.0 / 11.5.0 (לשתי הגרסאות יש את אותה גרסת FIRM) שמתאים ל **3DS היעד** (או "OLD" בשביל Old 3DS, או "NEW" בשביל New 3DS): + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -136,7 +136,7 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)" 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם 1. תעתיקו את `boot.nds` (שזה B9STool) לשורש הSD של **קונסולת היעד** -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. תעתיקו את `boot.3dsx` (שזה OCS) לשורש הSD של **קונסולת היעד** 1. תיצרו תיקייה בשם `boot9strap` על שורש כרטיס הSD של **קונסולת היעד** 1. תעתיקו את ה`.firm` של 11.5.0 שמתאים ל**קונסולת היעד** לתיקיית `boot9strap` על שורש כרטיס הSD של **קונסולת היעד** 1. תעתיקו את`boot9strap.firm` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם diff --git a/_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt b/_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt index fa59be9091..1b0a74311a 100644 --- a/_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt +++ b/_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt @@ -26,7 +26,7 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)" * הגרסה העדכנית של [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)* * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) * קובץ ה `.firm` של 11.4.0 / 11.5.0 (לשתי הגרסאות יש את אותה גרסת FIRM) שמתאים ל **3DS היעד** (או "OLD" בשביל Old 3DS, או "NEW" בשביל New 3DS): + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -142,7 +142,7 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)" 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם 1. תעתיקו את `boot.nds` (שזה B9STool) לשורש הSD של **קונסולת היעד** -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. תעתיקו את `boot.3dsx` (שזה OCS) לשורש הSD של **קונסולת היעד** 1. תיצרו תיקייה בשם `boot9strap` על שורש כרטיס הSD של **קונסולת היעד** 1. תעתיקו את ה`.firm` של 11.5.0 שמתאים ל**קונסולת היעד** לתיקיית `boot9strap` על שורש כרטיס הSD של **קונסולת היעד** 1. תעתיקו את`boot9strap.firm` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם diff --git a/_pages/he_IL/installing-boot9strap-(hardmod).txt b/_pages/he_IL/installing-boot9strap-(hardmod).txt index 5edbb73fd3..6098da6417 100644 --- a/_pages/he_IL/installing-boot9strap-(hardmod).txt +++ b/_pages/he_IL/installing-boot9strap-(hardmod).txt @@ -17,7 +17,7 @@ title: "התקנת boot9strap (הלחמה)" * הגרסה העדכנית של [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + משתמשי Windows יכולים להשתמש ב`.exe` המקומפל, בעוד שמשתמשי Mac וLinux יצטרכו את [Python 3](https://www.python.org/downloads/) מותקן כדי להריץ את ה`.py` * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) * הקובץ`.firm` לפי הקונסולה והאזור: | גרסא(אות) | ליבה | Old 3DS או Old 2DS | New 3DS או New 2DS | @@ -54,7 +54,7 @@ title: "התקנת boot9strap (הלחמה)" ##### חלק I - הכנות -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם 1. תעתיקו את תיקיית hardmod-b9s-installer מה `.zip` של hardmod-b9s-installer אל תיקייה במחשב שלכם 1. תעתיקו את ה`.firm` שהורדתם אל תיקיית hardmod-b9s-installer במחשב שלכם diff --git a/_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt b/_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt index e686b5c330..df7bc59e8f 100644 --- a/_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt +++ b/_pages/he_IL/installing-boot9strap-(homebrew-launcher).txt @@ -6,14 +6,14 @@ title: "התקנת boot9strap (Homebrew Launcher)" #### הוראות -##### Section I - OCS +##### חלק I - OCS -1. Press (A) to begin -1. Wait for the downloads to complete -1. Wait for the exploit to run +1. תלחצו (A) כדי להתחיל +1. תחכו לכל ההורדות להסתיים +1. תחכו לפירצה לרוץ + זה יכול לקחת כמה נסיונות - + If it freezes, just force the console to power off by holding the power button, then relaunch OCS to try again - + If you get a "PM INIT FAILED" error, try replacing the `safehax.3dsx` file in the `/3ds/` folder on your SD card with the one from the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19) + + אם זה נקפא, כבו בכוח את המכשיר על-ידי החזקת כפתור ההדלקה ולאחר מכן תפעילו מחדש את OCS כדי לנסות שוב + אם אתם מקבלים את השגיאה "PM INIT FAILED", תנסו להחליף את הקובץ `safehax.3dsx` בתיקיית `/3ds/` עם האחד מ[גרסת r19 של safehax](https://github.com/TiniVi/safehax/releases/tag/r19) 1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller #### חלק II - התקנת boot9strap diff --git a/_pages/he_IL/installing-boot9strap-(mset).txt b/_pages/he_IL/installing-boot9strap-(mset).txt index 43e3c69c9e..12195d1391 100644 --- a/_pages/he_IL/installing-boot9strap-(mset).txt +++ b/_pages/he_IL/installing-boot9strap-(mset).txt @@ -9,7 +9,7 @@ title: "התקנת boot9strap (MSET)" * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)* * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) * כל כרטיס פריצה של DS שעובד על הגרסה של המכשיר שלכם (לא SKY3DS) #### הוראות @@ -18,7 +18,7 @@ title: "התקנת boot9strap (MSET)" 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD 1. תעתיקו את הקובץ `boot.firm` מתוך ה`.7z` של Luma3DS לתוך ה-SD שלכם 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt index b2812fdb09..6527ca22d6 100644 --- a/_pages/he_IL/installing-boot9strap-(ntrboot).txt +++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt @@ -9,7 +9,7 @@ title: "התקנת boot9strap (ntrboot)" * הגרסה העדכנית של [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `devkit`, ולא קובץ ה`ntr`)* * את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* הגרסה העדכנית של [OCS](https://github.com/Pirater12/ocs/releases/latest) #### הוראות @@ -17,7 +17,7 @@ title: "התקנת boot9strap (ntrboot)" 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. תעתיקו את `boot.3dsx` שהוא OCS אל שורש כרטיס ה SD 1. תעתיקו את `SafeB9SInstaller.firm` אל שורש כרטיס ה SD שלכם ותשכתבו אותו אל `boot.firm` 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם diff --git a/_pages/he_IL/updating-b9s.txt b/_pages/he_IL/updating-b9s.txt index 4c1f0cef10..4a5a860edc 100644 --- a/_pages/he_IL/updating-b9s.txt +++ b/_pages/he_IL/updating-b9s.txt @@ -51,6 +51,9 @@ title: "עדכון B9S" ##### חלק III - ניקוי ה SD +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. תפתחו את GodMode9 על ידי החזקה של המקש (Start) בעת ההדלקה 1. אם תתבקשו לעשות גיבוי של קבצים חיוניים, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך אחרי שזה סיים 1. תלחצו על (Home) כדי להראות את תפריט הפעולה diff --git a/_pages/hu_HU/a9lh-to-b9s.txt b/_pages/hu_HU/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/hu_HU/a9lh-to-b9s.txt +++ b/_pages/hu_HU/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt b/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/hu_HU/home.txt b/_pages/hu_HU/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/hu_HU/home.txt +++ b/_pages/hu_HU/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/hu_HU/homebrew-launcher-(alternatives).txt b/_pages/hu_HU/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/hu_HU/homebrew-launcher-(alternatives).txt +++ b/_pages/hu_HU/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/hu_HU/homebrew-launcher-(soundhax).txt b/_pages/hu_HU/homebrew-launcher-(soundhax).txt index 8f6168725d..f8e1ee1b1d 100644 --- a/_pages/hu_HU/homebrew-launcher-(soundhax).txt +++ b/_pages/hu_HU/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound diff --git a/_pages/hu_HU/updating-b9s.txt b/_pages/hu_HU/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/hu_HU/updating-b9s.txt +++ b/_pages/hu_HU/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/id_ID/a9lh-to-b9s.txt b/_pages/id_ID/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/id_ID/a9lh-to-b9s.txt +++ b/_pages/id_ID/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt b/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/id_ID/home.txt b/_pages/id_ID/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/id_ID/home.txt +++ b/_pages/id_ID/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/id_ID/homebrew-launcher-(alternatives).txt b/_pages/id_ID/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/id_ID/homebrew-launcher-(alternatives).txt +++ b/_pages/id_ID/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/id_ID/homebrew-launcher-(soundhax).txt b/_pages/id_ID/homebrew-launcher-(soundhax).txt index 8f6168725d..f8e1ee1b1d 100644 --- a/_pages/id_ID/homebrew-launcher-(soundhax).txt +++ b/_pages/id_ID/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound diff --git a/_pages/id_ID/updating-b9s.txt b/_pages/id_ID/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/id_ID/updating-b9s.txt +++ b/_pages/id_ID/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/it_IT/a9lh-to-b9s.txt b/_pages/it_IT/a9lh-to-b9s.txt index cf2821779f..10b0e52a26 100644 --- a/_pages/it_IT/a9lh-to-b9s.txt +++ b/_pages/it_IT/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e ##### Sezione VIII - Pulizia della scheda SD +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Premi il pulsante HOME per far apparire il menu delle azioni 1. Seleziona "More..." 1. Seleziona "Scripts..." diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt index 87965f4bd8..c4fab914a2 100644 --- a/_pages/it_IT/finalizing-setup.txt +++ b/_pages/it_IT/finalizing-setup.txt @@ -8,7 +8,7 @@ Il file `boot.firm` viene lanciato da boot9strap stesso al termine del caricamen In questo caso, useremo Luma3DS di [AuroraWright](https://github.com/AuroraWright/) per avviare direttamente una SysNAND patchata, bypassando del tutto il bisogno di una EmuNAND. Questo semplifica l'uso di un 3DS così modificato, e permette di risparmiare spazio sulla scheda SD. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS will need to download some files on your device. +Assicurati che la comunicazione wireless della tua console sia attiva e di essere connesso ad internet. OCS ne avrà bisogno per scaricare dei file nella console. Durante la guida verranno anche configurate le seguenti applicazioni: @@ -20,7 +20,7 @@ Durante la guida verranno anche configurate le seguenti applicazioni: #### Istruzioni -##### Section I - Updating the System +##### Sezione I - Aggiornare il Sistema Se, utilizzando una versione precedente di questa guida, hai effettuato un CTRTransfer alla versione del software 2.1.0 su un *New 3DS*, dovresti adesso [ripristinare il tuo backup della NAND](godmode9-usage#nand_restore) prima di proseguire con questa sezione. {: .notice--danger} @@ -33,7 +33,7 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e + Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente + Se continui ad ottenere un errore, [segui la guida per il CTRTransfer](ctrtransfer), poi riprova ad aggiornare la console -##### Section II - Launching OCS +##### Sezione II - Avviare OCS 1. Avvia l'applicazione "Modalità download" 1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina @@ -44,21 +44,21 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e 1. Premi (B) per uscire dal menu di Rosalina 1. Premi il pulsante HOME, quindi chiudi l'applicazione "Modalità download" 1. Avvia l'applicazione "Modalità download" -1. Your device should load OCS +1. Ora la console dovrebbe avviare OCS -##### Section III - OCS +##### Sezione III - OCS -1. Press (A) to begin -1. Wait for the downloads and installs to complete -1. Press (Start) to exit when prompted +1. Premi (A) per cominciare +1. Attendi il termine del download e dell'installazione +1. Premi (Start) per uscire quando richiesto 1. Premi il pulsante HOME, quindi chiudi l'applicazione "Modalità download" -##### Section IV - DSP Dump +##### Sezione IV - Dump di DSP 1. Avviare l'applicazione DSP1 1. Al termine delle operazioni, premi (B) per cancellare l'app e ritornare al menu HOME -##### Section V - CTRNAND Luma3DS +##### Sezione V - CTRNAND Luma3DS 1. Avvia GodMode9 tenendo premuto (Start) durante l'accensione della console 1. Se ti viene richiesto di creare un backup dei file essenziali, premi (A) per accettare, e al termine di nuovo (A) per proseguire @@ -71,7 +71,7 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e 1. Premi il pulsante (A) per continuare 1. Premi (A) per ritirare le autorizzazioni di scrittura -##### Section VI - Backup SysNAND +##### Sezione VI - Backup della SysNAND 1. Premi il pulsante HOME per far apparire il menu delle azioni 1. Seleziona "More..." @@ -88,7 +88,7 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e 1. Cancella il file `_nandmin_###.bin` dalla cartella `/gm9/out/` della tua scheda SD dopo la copia 1. Reinserisci la scheda SD nel Nintendo 3DS -##### Section VII - Cleanup SD Card +##### Sezione VII - Pulizia della scheda SD 1. Premi il pulsante HOME per far apparire il menu delle azioni 1. Seleziona "More..." diff --git a/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt b/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt index 2580c01436..1bf9b2f254 100644 --- a/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Tieni presente che le più recenti versioni del software del 3DS hanno bloccato + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Tieni presente che in rare circostanze è possibile **brickare** una flashcart contraffatta durante il flashing, e renderla permanentemente inutilizzabile. È improbabile, tuttavia sono supportate soltanto le flashcart originali qui indicate. Per ridurre i rischi di ottenere una flashcart contraffatta, si raccomanda di comprarne una solo da siti affidabili (come [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/it_IT/home.txt b/_pages/it_IT/home.txt index 2385a244cb..c5ea6ee52d 100644 --- a/_pages/it_IT/home.txt +++ b/_pages/it_IT/home.txt @@ -11,6 +11,9 @@ header: excerpt: "La guida omnicomprensiva per installare un custom firmware su 3DS,
da zero a boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} Questa guida è riservata _solamente_ alle console retail (cioè quelle acquistate in negozio, non quelle ottenute tramite il Nintendo Developer Program)! Se hai una console developer ("PANDA" o "SNAKE"), segui la [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ La guida ha bisogno di *te* per [essere tradotta](https://translate.3ds.guide/) La guida ha bisogno di *te* per il seeding di [questi](https://3ds.guide/rss.xml) torrent! {: .notice--success} -Assicurati di leggere tutte le sezioni introduttive prima di proseguire. -{: .notice--warning} - ## Cosa vuol dire Homebrew? Con [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) di solito si fa riferimento a software non autorizzato da Nintendo. Ti permette di avviare giochi amatoriali, programmi di save editing e di backup, ed emulatori di diverse piattaforme ormai obsolete. diff --git a/_pages/it_IT/homebrew-launcher-(alternatives).txt b/_pages/it_IT/homebrew-launcher-(alternatives).txt index 112cb7e0c2..3509aa85ed 100644 --- a/_pages/it_IT/homebrew-launcher-(alternatives).txt +++ b/_pages/it_IT/homebrew-launcher-(alternatives).txt @@ -6,17 +6,19 @@ L'Homebrew Launcher ha numerosi entrypoint, o metodi per essere avviato. Se non puoi utilizzare browserhax (vedi la tabella qui sotto), non possiedi alcuno dei seguenti giochi e non hai a disposizione un altro 3DS che può accedere all'Homebrew Launcher, l'alternativa più economica è acquistare la versione "Nintendo Selects" di [Ocarina of Time 3D](http://amzn.eu/1B4k35L) (assicurati di acquistare la versione corretta per la tua regione) e un [Powersaves](http://amzn.eu/38VYEIF) (compatibile con tutte le console), e poi selezionare l'oot3dhax dalla tabella sottostante. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. +Assicurati che la comunicazione wireless della tua console sia attiva e di essere connesso ad internet. OCS (usato nella prossima parte della guida) ne avrà bisogno per scaricare dei file nella tua console. #### Cosa serve -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Istruzioni 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della tua scheda SD +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinserisci la scheda SD nel Nintendo 3DS 1. Accendi la console 1. Usa uno dei seguenti entrypoint per accedere all'Homebrew Launcher: @@ -50,7 +52,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the -1. Your device should load OCS +1. Ora la console dovrebbe avviare OCS Prosegui con l'[Installazione di boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher)) {: .notice--primary} diff --git a/_pages/it_IT/homebrew-launcher-(soundhax).txt b/_pages/it_IT/homebrew-launcher-(soundhax).txt index c8e01894c2..f4b314ef62 100644 --- a/_pages/it_IT/homebrew-launcher-(soundhax).txt +++ b/_pages/it_IT/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ L'Homebrew Launcher ha numerosi entrypoint, o metodi per essere avviato. Soundhax è compatibile con le versioni del software comprese tra 9.0.0 e 11.3.0 nelle regioni EUR, JPN, KOR e USA. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. +Assicurati che la comunicazione wireless della tua console sia attiva e di essere connesso ad internet. OCS (usato nella prossima parte della guida) ne avrà bisogno per scaricare dei file nella tua console. {% capture notice-1 %} @@ -19,13 +19,17 @@ Ciò significa che se aggiornate con una scheda di gioco da una versione avente #### Cosa serve -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Istruzioni 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della tua scheda SD +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinserisci la scheda SD nel Nintendo 3DS 1. Accendi la console 1. Avvia Sound Nintendo 3DS @@ -42,7 +46,7 @@ Ciò significa che se aggiornate con una scheda di gioco da una versione avente ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load OCS +1. Ora la console dovrebbe avviare OCS ___ diff --git a/_pages/it_IT/installing-boot9strap-(2xrsa).txt b/_pages/it_IT/installing-boot9strap-(2xrsa).txt index 40bef2c096..c5107be5b2 100644 --- a/_pages/it_IT/installing-boot9strap-(2xrsa).txt +++ b/_pages/it_IT/installing-boot9strap-(2xrsa).txt @@ -7,7 +7,7 @@ title: "Installazione di boot9strap (2xrsa)" * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Istruzioni @@ -15,7 +15,7 @@ title: "Installazione di boot9strap (2xrsa)" 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della tua scheda SD 1. Copia il file `boot.firm` dall'archivio `.7z` di Luma3DS nella directory principale della tua scheda SD 1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD 1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD diff --git a/_pages/it_IT/installing-boot9strap-(browser).txt b/_pages/it_IT/installing-boot9strap-(browser).txt index 6ce63f5811..ec86ca7b70 100644 --- a/_pages/it_IT/installing-boot9strap-(browser).txt +++ b/_pages/it_IT/installing-boot9strap-(browser).txt @@ -9,7 +9,7 @@ Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su E * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Istruzioni @@ -17,7 +17,7 @@ Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su E 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della tua scheda SD 1. Copia il file `boot.firm` dall'archivio `.7z` di Luma3DS nella directory principale della tua scheda SD 1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD 1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD diff --git a/_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt b/_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt index 5dfe2adba4..c16956311b 100644 --- a/_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt +++ b/_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt @@ -27,7 +27,7 @@ Se non usi il file `.firm` corrispondente al 3DS di destinazione, BRICKERAI la c * L'ultima versione di [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) * Il file `.firm` per versione del software 11.4.0/11.5.0 (entrambe hanno la stessa versione del file FIRM) corrispondente al **3DS di destinazione** ("OLD" per Old 3DS o "NEW" per New 3DS): + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -136,7 +136,7 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir 1. Copia il file `boot.firm` dall'archivio `.7z` di Luma3DS nella directory principale della tua scheda SD 1. Copia il file `boot.nds` (B9STool) nella directory principale della scheda SD del **3DS di destinazione** -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della scheda SD del **3DS di destinazione** 1. Crea una cartella chiamata `boot9strap` nella directory principale della scheda SD del **3DS di destinazione** 1. Copia il file `.firm` della versione del software 11.5.0 corrispondente al **3DS di destinazione** nella cartella `boot9strap` nella directory principale della scheda SD del **3DS di destinazione** 1. Copia il file `boot9strap.firm` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD diff --git a/_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt b/_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt index 221583c006..44bbd16640 100644 --- a/_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt +++ b/_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt @@ -26,7 +26,7 @@ Se non usi il file `.firm` corrispondente al 3DS di destinazione, BRICKERAI la c * L'ultima versione di [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) * Il file `.firm` per versione del software 11.4.0/11.5.0 (entrambe hanno la stessa versione del file FIRM) corrispondente al **3DS di destinazione** ("OLD" per Old 3DS o "NEW" per New 3DS): + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -142,7 +142,7 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir 1. Copia il file `boot.firm` dall'archivio `.7z` di Luma3DS nella directory principale della tua scheda SD 1. Copia il file `boot.nds` (B9STool) nella directory principale della scheda SD del **3DS di destinazione** -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della scheda SD del **3DS di destinazione** 1. Crea una cartella chiamata `boot9strap` nella directory principale della scheda SD del **3DS di destinazione** 1. Copia il file `.firm` della versione del software 11.5.0 corrispondente al **3DS di destinazione** nella cartella `boot9strap` nella directory principale della scheda SD del **3DS di destinazione** 1. Copia il file `boot9strap.firm` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD diff --git a/_pages/it_IT/installing-boot9strap-(hardmod).txt b/_pages/it_IT/installing-boot9strap-(hardmod).txt index 86c1a173d7..ded7bfd2eb 100644 --- a/_pages/it_IT/installing-boot9strap-(hardmod).txt +++ b/_pages/it_IT/installing-boot9strap-(hardmod).txt @@ -17,7 +17,7 @@ Questo processo funziona su New 3DS, New 2DS, Old 3DS e Old 2DS su *tutte* le ve * L'ultima versione di [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Gli utenti Windows possono usare il file `.exe` precompilato, mentre gli utenti Mac e Linux dovranno installare [Python 3](https://www.python.org/downloads/) per avviare il file `.py` * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) * Il file `.firm` per la tua console e per la tua versione di sistema: | Versione(i) | Kernel | Old 3DS o Old 2DS | New 3DS o New 2DS | @@ -54,7 +54,7 @@ Questo processo funziona su New 3DS, New 2DS, Old 3DS e Old 2DS su *tutte* le ve ##### Sezione I - Preparazione -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della tua scheda SD 1. Copia il file `boot.firm` dall'archivio `.7z` di Luma3DS nella directory principale della tua scheda SD 1. Copia la cartella hardmod-b9s-installer dall'archivio `.zip` di hardmod-b9s-installer sul tuo computer 1. Copia il file `.firm` scaricato nella cartella hardmod-b9s-installer sul tuo computer diff --git a/_pages/it_IT/installing-boot9strap-(homebrew-launcher).txt b/_pages/it_IT/installing-boot9strap-(homebrew-launcher).txt index 1791f3a78e..bd6d878292 100644 --- a/_pages/it_IT/installing-boot9strap-(homebrew-launcher).txt +++ b/_pages/it_IT/installing-boot9strap-(homebrew-launcher).txt @@ -6,14 +6,14 @@ Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su E #### Istruzioni -##### Section I - OCS +##### Sezione I - OCS -1. Press (A) to begin -1. Wait for the downloads to complete -1. Wait for the exploit to run +1. Premi (A) per cominciare +1. Attendi il termine del download +1. Attendi l'avvio dell'exploit + Potrebbero essere necessari più tentativi - + If it freezes, just force the console to power off by holding the power button, then relaunch OCS to try again - + If you get a "PM INIT FAILED" error, try replacing the `safehax.3dsx` file in the `/3ds/` folder on your SD card with the one from the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19) + + Se la console dovesse bloccarsi, forzane lo spegnimento tenendo premuto il pulsante di accensione, quindi rilancia OCS per riprovare + + Se riscontri l'errore "PM INIT FAILED", prova a sostituire il file `safehax.3dsx` nella cartella `/3ds/` della tua scheda SD con quello della [versione r19 di safehax](https://github.com/TiniVi/safehax/releases/tag/r19) 1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller ##### Sezione II - Installazione di boot9strap diff --git a/_pages/it_IT/installing-boot9strap-(mset).txt b/_pages/it_IT/installing-boot9strap-(mset).txt index 5a4c1d1348..3d188675ac 100644 --- a/_pages/it_IT/installing-boot9strap-(mset).txt +++ b/_pages/it_IT/installing-boot9strap-(mset).txt @@ -9,7 +9,7 @@ Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su E * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) * Una flashcart per il Nintendo DS che funzioni sulla versione di sistema della tua console #### Istruzioni @@ -18,7 +18,7 @@ Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su E 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della tua scheda SD 1. Copia il file `boot.firm` dall'archivio `.7z` di Luma3DS nella directory principale della tua scheda SD 1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD 1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt index 1abbb5bde8..0cf916fb61 100644 --- a/_pages/it_IT/installing-boot9strap-(ntrboot).txt +++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt @@ -9,7 +9,7 @@ title: "Installazione di boot9strap (ntrboot)" * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* L'ultima versione di [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Istruzioni @@ -17,7 +17,7 @@ title: "Installazione di boot9strap (ntrboot)" 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copia il file `boot.3dsx` (OCS) nella directory principale della tua scheda SD 1. Copia il file `SafeB9SInstaller.firm` nella directory principale della tua scheda SD e rinominalo in `boot.firm` 1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD 1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD diff --git a/_pages/it_IT/updating-b9s.txt b/_pages/it_IT/updating-b9s.txt index ca0a58fdc6..b5bc2312e7 100644 --- a/_pages/it_IT/updating-b9s.txt +++ b/_pages/it_IT/updating-b9s.txt @@ -51,6 +51,9 @@ Se durante questa sezione ti verrà chiesto di sovrascrivere dei file sulla tua ##### Sezione III - Pulizia della scheda SD +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Avvia GodMode9 tenendo premuto (Start) durante l'accensione della console 1. Se ti viene richiesto di creare un backup dei file essenziali, premi (A) per accettare, e al termine di nuovo (A) per proseguire 1. Premi il pulsante HOME per far apparire il menu delle azioni diff --git a/_pages/ja_JP/a9lh-to-b9s.txt b/_pages/ja_JP/a9lh-to-b9s.txt index e599f3d392..9f0f3aa81e 100644 --- a/_pages/ja_JP/a9lh-to-b9s.txt +++ b/_pages/ja_JP/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. 「More...」を選択します 1. Select "Scripts..." diff --git a/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt b/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt index aefa714fcf..ad49497a26 100644 --- a/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ja_JP/home.txt b/_pages/ja_JP/home.txt index 76d9367e16..0c615be6bd 100644 --- a/_pages/ja_JP/home.txt +++ b/_pages/ja_JP/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## Homebrewとは [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games)は通常、任天堂が許可していないソフトウェアを指します。 自作ゲーム、セーブデータの改造やバックアップ、さまざまな古いゲームのエミュレータなどのソフトウェアを実行できます。 diff --git a/_pages/ja_JP/homebrew-launcher-(alternatives).txt b/_pages/ja_JP/homebrew-launcher-(alternatives).txt index b99b89baaa..1d9107668a 100644 --- a/_pages/ja_JP/homebrew-launcher-(alternatives).txt +++ b/_pages/ja_JP/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### 必要なもの * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### 手順 1. Power off your device 1. パソコンにSDカードを入れます 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/ja_JP/homebrew-launcher-(soundhax).txt b/_pages/ja_JP/homebrew-launcher-(soundhax).txt index fc67687c61..15888707ba 100644 --- a/_pages/ja_JP/homebrew-launcher-(soundhax).txt +++ b/_pages/ja_JP/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### 必要なもの * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### 手順 1. Power off your device 1. パソコンにSDカードを入れます 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. ニンテンドー3DSサウンドを起動します diff --git a/_pages/ja_JP/updating-b9s.txt b/_pages/ja_JP/updating-b9s.txt index 0c59767119..37a7ebca51 100644 --- a/_pages/ja_JP/updating-b9s.txt +++ b/_pages/ja_JP/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/ko_KR/a9lh-to-b9s.txt b/_pages/ko_KR/a9lh-to-b9s.txt index a821fd7e66..013c60c506 100644 --- a/_pages/ko_KR/a9lh-to-b9s.txt +++ b/_pages/ko_KR/a9lh-to-b9s.txt @@ -148,6 +148,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. (Home)을 눌러 작업 메뉴를 띄워 주세요. 1. "More..."를 선택해 주세요. 1. Select "Scripts..." diff --git a/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt b/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt index 1ece883fee..8f80f1d979 100644 --- a/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ko_KR/home.txt b/_pages/ko_KR/home.txt index 471a3bed2c..2f6f8f323a 100644 --- a/_pages/ko_KR/home.txt +++ b/_pages/ko_KR/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} 오직 _시판용_기기를 (닌텐도 개발자 프로그램의 개발자용이 아닌) 위한 가이드입니다! 개발자용 기기("PANDA" 또는 "SNAKE")를 가지고 있다면 [devGuide](https://dev.3ds.guide)를 참고해 주세요. @@ -24,9 +27,6 @@ excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9str 이 가이드는 [토렌트 파일](https://3ds.guide/rss.xml)의 시드 배포를 위해 여러분의 도움이 필요합니다! {: .notice--success} -계속하기 전에 다음 설명을 모두 읽어 주세요. -{: .notice--warning} - ## 홈브류란 무엇입니까? [**홈브류**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games)는 일반적으로 닌텐도의 승인을 받지 않은 소프트웨어를 말합니다. 홈브류 게임, 저장 데이터 수정 및 백업 도구 및 구형 시스템용 에뮬레이터 등을 실행할 수 있게 해 줍니다. diff --git a/_pages/ko_KR/homebrew-launcher-(alternatives).txt b/_pages/ko_KR/homebrew-launcher-(alternatives).txt index d8d3687667..4b0f5faaf1 100644 --- a/_pages/ko_KR/homebrew-launcher-(alternatives).txt +++ b/_pages/ko_KR/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### 준비 사항 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### 진행 방법 1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. SD 카드를 기기에 다시 삽입해 주세요. 1. 기기를 시작해 주세요. 1. 다음 홈브류 런처 대체 진입법을 사용해 주세요: diff --git a/_pages/ko_KR/homebrew-launcher-(soundhax).txt b/_pages/ko_KR/homebrew-launcher-(soundhax).txt index 702234ebcf..ce63862d9c 100644 --- a/_pages/ko_KR/homebrew-launcher-(soundhax).txt +++ b/_pages/ko_KR/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### 준비물 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### 진행 방법 1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. SD 카드를 기기에 다시 삽입해 주세요. 1. 기기를 시작해 주세요. 1. 닌텐도 3DS 사운드 앱을 실행해 주세요. diff --git a/_pages/ko_KR/updating-b9s.txt b/_pages/ko_KR/updating-b9s.txt index 3a99c428be..dc266e0089 100644 --- a/_pages/ko_KR/updating-b9s.txt +++ b/_pages/ko_KR/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. (Home)을 눌러 작업 메뉴를 띄워 주세요. diff --git a/_pages/ms_MY/a9lh-to-b9s.txt b/_pages/ms_MY/a9lh-to-b9s.txt index 65d95735f5..47df3b6d2f 100644 --- a/_pages/ms_MY/a9lh-to-b9s.txt +++ b/_pages/ms_MY/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt b/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt index fce97998fa..a9ff9e2e16 100644 --- a/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ms_MY/home.txt b/_pages/ms_MY/home.txt index f441d54591..d05e214716 100644 --- a/_pages/ms_MY/home.txt +++ b/_pages/ms_MY/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## Apa itu Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) biasanya dikenali sebagai perisian yang tidak disahkan oleh Nintendo. Ianya memberi anda kelebihan untuk menjalankan homebrew games, alat-alat seperti mengubah saves dan simpanananya, dan emulator untuk sistem yang dahulu. diff --git a/_pages/ms_MY/homebrew-launcher-(alternatives).txt b/_pages/ms_MY/homebrew-launcher-(alternatives).txt index 1ea02a0517..4cc4a39968 100644 --- a/_pages/ms_MY/homebrew-launcher-(alternatives).txt +++ b/_pages/ms_MY/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the ### Apa yang anda perlukan * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Arahan 1. Power off your device 1. Pasang kad SD anda ke dalam komputer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/ms_MY/homebrew-launcher-(soundhax).txt b/_pages/ms_MY/homebrew-launcher-(soundhax).txt index 45363a707a..703467c393 100644 --- a/_pages/ms_MY/homebrew-launcher-(soundhax).txt +++ b/_pages/ms_MY/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Homebrew Launcher mempunyai pelbagai cara masuk, atau cara melancarkannya. Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### Apa yang ada perlukan -* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -*Keluaran terkini [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fail `.7z`)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Arahan 1. Power off your device 1. Pasang kad SD anda ke dalam komputer -1. Copy _the contents of_ `starter.zip` to the root of your SD card -1. Salin SoundHax `.m4a` letakkan di root kad SD anda -1. Salin otherapp payload letakkan di root kad SD anda dan tukarkan namanya ke `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Buka Nintendo 3DS Sound @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Pergi ke `/SDCARD`, kemudian mainkan "<3 nedwill 2016" + Mungkin memerlukan beberapa kali cubaan + Jika ia beku, anda boleh memaksa power off peranti anda dengan menahan butang power, kemudian cuba lagi - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/ms_MY/updating-b9s.txt b/_pages/ms_MY/updating-b9s.txt index 480623d9d7..429f4098f5 100644 --- a/_pages/ms_MY/updating-b9s.txt +++ b/_pages/ms_MY/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/nl_NL/a9lh-to-b9s.txt b/_pages/nl_NL/a9lh-to-b9s.txt index 4625c4f9cb..0fcf231103 100644 --- a/_pages/nl_NL/a9lh-to-b9s.txt +++ b/_pages/nl_NL/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt b/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt index 3ff3eeb2b4..f439e63cf8 100644 --- a/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/nl_NL/home.txt b/_pages/nl_NL/home.txt index a25564db82..57ac2c1ddb 100644 --- a/_pages/nl_NL/home.txt +++ b/_pages/nl_NL/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## Wat is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) verwijst gewoonlijk naar software die niet is geauthoriseerd door Nintendo. Het zorgt ervoor dat je homebrew spellen kan spelen en tools als save editing, backups en emulators voor oudere systemen kan gebruiken. diff --git a/_pages/nl_NL/homebrew-launcher-(alternatives).txt b/_pages/nl_NL/homebrew-launcher-(alternatives).txt index 6d9a932b0b..c5677b1fe1 100644 --- a/_pages/nl_NL/homebrew-launcher-(alternatives).txt +++ b/_pages/nl_NL/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Benodigdheden * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructies 1. Schakel je 3ds uit 1. Plaats je SD kaart in je computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan 1. Gebruik een van de volgende alternatieve entrypoints om in de Homebrew Launcher te komen: diff --git a/_pages/nl_NL/homebrew-launcher-(soundhax).txt b/_pages/nl_NL/homebrew-launcher-(soundhax).txt index edff3a2d86..593ea81f1f 100644 --- a/_pages/nl_NL/homebrew-launcher-(soundhax).txt +++ b/_pages/nl_NL/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### Benodigdheden * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructies 1. Schakel je 3DS uit 1. Plaats je SD kaart in je computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan 1. Start Nintendo 3DS Sound diff --git a/_pages/nl_NL/updating-b9s.txt b/_pages/nl_NL/updating-b9s.txt index bd6fcdf52a..38f28ec51a 100644 --- a/_pages/nl_NL/updating-b9s.txt +++ b/_pages/nl_NL/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Druk op de (Home) knop om het actiemenu te openen diff --git a/_pages/no_NO/a9lh-to-b9s.txt b/_pages/no_NO/a9lh-to-b9s.txt index b7291e6c12..19df54adcc 100644 --- a/_pages/no_NO/a9lh-to-b9s.txt +++ b/_pages/no_NO/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Velg "More..." 1. Select "Scripts..." diff --git a/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt b/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt index 9963cc3f5d..1e7c69726c 100644 --- a/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/no_NO/home.txt b/_pages/no_NO/home.txt index 8014192735..39ffc35286 100644 --- a/_pages/no_NO/home.txt +++ b/_pages/no_NO/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## Hva er Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) viser vanligvis til programvare som ikke er autorisert av Nintendo. Det gjør det mulig for deg å kjøre homebrew- spill, verktøy som saveendring og sikkerhetskopier, samt emulatorer for diverse eldre systemer. diff --git a/_pages/no_NO/homebrew-launcher-(alternatives).txt b/_pages/no_NO/homebrew-launcher-(alternatives).txt index 51f79014dc..9a5033cf76 100644 --- a/_pages/no_NO/homebrew-launcher-(alternatives).txt +++ b/_pages/no_NO/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Det du trenger * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instruksjoner 1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/no_NO/homebrew-launcher-(soundhax).txt b/_pages/no_NO/homebrew-launcher-(soundhax).txt index dabadb113b..a73953f574 100644 --- a/_pages/no_NO/homebrew-launcher-(soundhax).txt +++ b/_pages/no_NO/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Homebrew Launcher har flere forskjellige inngangspunkt eller metoder for å star Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### Det du trenger -* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* Siste utgave av [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-filen)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instruksjoner 1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din -1. Copy _the contents of_ `starter.zip` to the root of your SD card -1. Kopier Soundhax `.m4a` til roten av SD-kortet -1. Kopier otherapp payload til roten av SD-kortet og endre navnet til `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device 1. Åpne Nintendo 3DS Sound @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Gå til `/SDCARD`, og spill deretter av "<3 nedwill 2016" + Dette kan ta flere forsøk + Hvis enheten fryser, kan du tvinge den til å skru seg av ved og holde av-knappen og så prøve igjen - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/no_NO/updating-b9s.txt b/_pages/no_NO/updating-b9s.txt index aa53c0cc2f..71f4103ebc 100644 --- a/_pages/no_NO/updating-b9s.txt +++ b/_pages/no_NO/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/pl_PL/a9lh-to-b9s.txt b/_pages/pl_PL/a9lh-to-b9s.txt index eb06c6bb2f..f291d58784 100644 --- a/_pages/pl_PL/a9lh-to-b9s.txt +++ b/_pages/pl_PL/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt b/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt index 1ba3fd0201..bce64b6b33 100644 --- a/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/pl_PL/home.txt b/_pages/pl_PL/home.txt index ff5fa42dde..6b8d4e4afd 100644 --- a/_pages/pl_PL/home.txt +++ b/_pages/pl_PL/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## Co to jest Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) zwykle odnosi się do programów, które nie są autoryzowane przez Nintendo. Programy te pozwalają na uruchamianie niekomercyjnych gier homebrew, narzędzi do edycji i tworzenia kopii zapasowych zapisów gier, a także emulatorów różnorakich, starszych systemów. diff --git a/_pages/pl_PL/homebrew-launcher-(alternatives).txt b/_pages/pl_PL/homebrew-launcher-(alternatives).txt index 0a9fee5550..4b3bf2cfdc 100644 --- a/_pages/pl_PL/homebrew-launcher-(alternatives).txt +++ b/_pages/pl_PL/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Czego potrzebujesz * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instrukcje 1. Power off your device 1. Włóż kartę SD do komputera 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/pl_PL/homebrew-launcher-(soundhax).txt b/_pages/pl_PL/homebrew-launcher-(soundhax).txt index 99570ff345..8b31c138b6 100644 --- a/_pages/pl_PL/homebrew-launcher-(soundhax).txt +++ b/_pages/pl_PL/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Homebrew Launcher ma wiele punktów wejścia - sposobów na jego uruchomienie. Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### Czego potrzebujesz -* Pakietu startowego [Homebrew](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* Najnowszą wersję [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(plik`.7z`)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instrukcje 1. Power off your device 1. Włóż kartę SD do komputera -1. Copy _the contents of_ `starter.zip` to the root of your SD card +1. Copy `boot.3dsx` (OCS) to the root of your SD card 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Skopiuj pobrany plik payloadu otherapp do katalogu głównego twojej karty SD i zmień jego nazwę na 'otherapp.bin' -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Uruchom aplikację Nintendo 3DS Sound @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Nawiguj do `/SDCARD`, następnie odtwórz "<3 nedwill 2016" + Może to wymagać wielu prób + Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/pl_PL/updating-b9s.txt b/_pages/pl_PL/updating-b9s.txt index edb9df9a5e..796ef6264f 100644 --- a/_pages/pl_PL/updating-b9s.txt +++ b/_pages/pl_PL/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/pt_BR/a9lh-to-b9s.txt b/_pages/pt_BR/a9lh-to-b9s.txt index 831a1ee478..f0097ab8c6 100644 --- a/_pages/pt_BR/a9lh-to-b9s.txt +++ b/_pages/pt_BR/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Aperte (Home) para abrir o menu de ações 1. Selecione "More..." 1. Selecione "Scripts..." diff --git a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt index ddd2f2b467..37c14f6ca8 100644 --- a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note que em algumas raras circunstâncias, pode ser possível que o processo de instalação cause um **brick** em um flashcart falso e torne-o permanentemente inutilizável. É pouco provável que isso ocorra, mas mesmo assim somente os flashcarts originais listados são suportados. Para reduzir a chance de receber um flashcart falso, é recomendado que você use um site com uma boa reputação para comprar o seu flashcart, (como o [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt index 6948a38aa9..fd83c3f8d1 100644 --- a/_pages/pt_BR/home.txt +++ b/_pages/pt_BR/home.txt @@ -11,6 +11,9 @@ header: excerpt: "Um guia completo de Custom Firmware para o 3DS,
do zero até boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} Este guia é para aparelhos de varejo (comprados por consumidores; não pelo Nintendo Developer Program) _apenas_! Se você possui um aparelho de desenvolvedor ("PANDA" ou "SNAKE"), cheque o [Guia de desenvolvedor](https://dev.3ds.guide). @@ -24,9 +27,6 @@ Este guia precisa da *sua* ajuda para [traduzi-lo](https://translate.3ds.guide/) Este guia precisa da *sua* ajuda para semear [estes](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Leia todas as páginas introdutórias antes de prosseguir. -{: .notice--warning} - ## O que é homebrew? O termo [**Homebrew**](https://pt.wikipedia.org/wiki/Homebrew) geralmente se refere ao software que não é autorizado pela Nintendo. Ele permite você rodar jogos homebrew, ferramentas como backup e edição de saves, e emuladores de vários sistemas antigos. diff --git a/_pages/pt_BR/homebrew-launcher-(alternatives).txt b/_pages/pt_BR/homebrew-launcher-(alternatives).txt index 501ff2f3a9..c6bab968a7 100644 --- a/_pages/pt_BR/homebrew-launcher-(alternatives).txt +++ b/_pages/pt_BR/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### O que você precisa * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instruções 1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo 1. Use um dos seguintes pontos de entrada alternativos para entrar no Homebrew Launcher: diff --git a/_pages/pt_BR/homebrew-launcher-(soundhax).txt b/_pages/pt_BR/homebrew-launcher-(soundhax).txt index faa12e53b1..dbac49c099 100644 --- a/_pages/pt_BR/homebrew-launcher-(soundhax).txt +++ b/_pages/pt_BR/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ O Homebrew Launcher possui vários pontos de entrada diferentes, ou métodos de Soundhax é compatível com as versões de 9.0.0 a 11.3.0 nas regiões EUA, EUR, JPN, KOR. -Certifique-se de que a Comunicação sem fio do seu dispositivo está ligada pois o udsploit (utilizado na próxima página) irá precisar do módulo wireless ativo para funcionar, e alguns dispositivos (New 3DS, New 2DS e Old 2DS) não podem ajustar as configurações de Comunicação sem fio a partir do Homebrew Launcher. A Comunicação sem fio precisa apenas estar ligada; conectá-la a um ponto de acesso não é necessário. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ Isto significa que usar um Update por Cartucho de uma versão contendo uma vers #### O que você precisa -* O [Kit de Iniciante de Homebrew](http://smealum.github.io/ninjhax2/starter.zip) -+ A versão mais recente do [Soundhax](http://soundhax.com/) *(para o seu dispositivo e região)* -*A versão mais recente do [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap padrão; não o arquivo `devkit`, nem o arquivo `ntr`)* -* A versão mais recente do [safehax](https://github.com/TiniVi/safehax/releases/latest) -* A versão mais recente do [udsploit](https://github.com/smealum/udsploit/releases/latest) -* A versão mais recente do [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(o arquivo `.7z`)* -+ O [payload otherapp](https://smealum.github.io/3ds/#otherapp) *(para sua versão e região)* +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instruções 1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador -1. Copie _o conteúdo do_ `starter.zip` para a raiz do seu cartão SD -1. Copie o Soundhax `.m4a` para a raiz do seu cartão SD -1. Copie o payload otherapp para a raiz do cartão SD e renomeie-o para `otherapp.bin` -1. Copie o `boot.firm` do `.7z` do Luma3DS para a raíz do seu cartão SD -1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD -1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD -1. Copie o `safehax.3dsx` para a pasta `/3ds/` no seu cartão SD -1. Copie `udsploit.3dsx` para a pasta `/3ds/` no seu cartão SD -1. Copie `SafeB9SInstaller.bin` do `.zip` do SafeB9SInstaller para a raiz do seu cartão SD e renomeie `SafeB9SInstaller.bin` para `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo 1. Abra o Som Nintendo 3DS @@ -57,15 +42,11 @@ Isto significa que usar um Update por Cartucho de uma versão contendo uma vers 1. Vá até `/SDCARD`, depois toque "<3 nedwill 2016" + Isso pode levar várias tentativas + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente - + Se você receber uma tela vermelha, certifique-se de que você copiou _o conteúdo da_ pasta `starter` para a raiz do seu cartão SD ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Seu dispositivo deve abrir o Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/pt_BR/updating-b9s.txt b/_pages/pt_BR/updating-b9s.txt index 4758cf8bb8..9b8f5eeb8b 100644 --- a/_pages/pt_BR/updating-b9s.txt +++ b/_pages/pt_BR/updating-b9s.txt @@ -51,6 +51,9 @@ Para todas as etapas nesta seção, substitua quaisquer arquivos existentes no s ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Inicie o GodMode9 segurando (Start) durante a inicialização 1. Se você for solicitado para criar um backup de arquivos essenciais, aperte (A) pra fazê-lo, e depois aperte (A) para continuar quando ele for concluído 1. Aperte (Home) para abrir o menu de ações diff --git a/_pages/pt_PT/a9lh-to-b9s.txt b/_pages/pt_PT/a9lh-to-b9s.txt index b48b3d69ec..221f9704c8 100644 --- a/_pages/pt_PT/a9lh-to-b9s.txt +++ b/_pages/pt_PT/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt index c8d1e12770..d527359322 100644 --- a/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/pt_PT/home.txt b/_pages/pt_PT/home.txt index 2b1676007a..3c1fc936d9 100644 --- a/_pages/pt_PT/home.txt +++ b/_pages/pt_PT/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/pt_PT/homebrew-launcher-(alternatives).txt b/_pages/pt_PT/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/pt_PT/homebrew-launcher-(alternatives).txt +++ b/_pages/pt_PT/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/pt_PT/homebrew-launcher-(soundhax).txt b/_pages/pt_PT/homebrew-launcher-(soundhax).txt index 8ec11a0dff..7c4c2bb8e3 100644 --- a/_pages/pt_PT/homebrew-launcher-(soundhax).txt +++ b/_pages/pt_PT/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Há muitas maneiras e pontos de entrada (entrypoints) para acederes ao Homebrew Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### Requisitos -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instruções 1. Power off your device 1. Insert your SD card into your computer -1. Copy _the contents of_ `starter.zip` to the root of your SD card +1. Copy `boot.3dsx` (OCS) to the root of your SD card 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copia o payload otherapp para a raíz do teu cartão SD e renomeia-o para `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Abre a aplicação Som Nintendo 3DS @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries + If it freezes, just force the console to power off by holding the power button, then try again - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/pt_PT/updating-b9s.txt b/_pages/pt_PT/updating-b9s.txt index 46dd63b754..11d37e9763 100644 --- a/_pages/pt_PT/updating-b9s.txt +++ b/_pages/pt_PT/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/ro_RO/a9lh-to-b9s.txt b/_pages/ro_RO/a9lh-to-b9s.txt index 5a18d072b2..5e07f40394 100644 --- a/_pages/ro_RO/a9lh-to-b9s.txt +++ b/_pages/ro_RO/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ Dacă, înainte să urmăriți acest ghid, aveați deja o configurare cu EmuNAND ##### Secțiunea VIII - Curățarea cardului SD +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Apăsați (Home) pentru a arăta meniul de acțiuni 1. Selectați "More..." 1. Selectați "Scripts..." diff --git a/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt b/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt index 5248dca556..828cecd096 100644 --- a/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ro_RO/home.txt b/_pages/ro_RO/home.txt index 57451d4008..aff9c1e8ea 100644 --- a/_pages/ro_RO/home.txt +++ b/_pages/ro_RO/home.txt @@ -11,6 +11,9 @@ header: excerpt: "Un ghid complet spre firmware personalizat pentru 3DS,
de la stoc la boot9strap.
" # --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} Acest ghid este _doar_ pentru consolele cumpărate din magazin (nu se aplică pentru cele din Nintendo Developer Program)! Dacă aveți o consolă pentru dezvoltatori ("PANDA" sau "SNAKE"), vizitați [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ Acest ghid are nevoie de ajutorul *vostru* pentru a-l [traduce](https://translat Acest ghid are nevoie de ajutorul *vostru* pentru a partaja [aceste](https://3ds.guide/rss.xml) torrente! {: .notice--success} -Citiți toate paginile introductive înainte de a continua. -{: .notice--warning} - ## Ce este Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) de obicei se referă la software neautorizat de către Nintendo. Vă permite să porniți jocuri homebrew, unelte cum ar fi modificatoare de salvări și copii de rezervă, și diverse emulatoare pentru câteva console vechi. diff --git a/_pages/ro_RO/homebrew-launcher-(alternatives).txt b/_pages/ro_RO/homebrew-launcher-(alternatives).txt index dd6496a7bf..f6dd8c986d 100644 --- a/_pages/ro_RO/homebrew-launcher-(alternatives).txt +++ b/_pages/ro_RO/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Ce aveți nevoie * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instrucțiuni 1. Închideți dispozitivul 1. Introduceți cardul SD în calculator 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul 1. Folosiți una dintre următoarele puncte de intrare alternative pentru a accesa Homebrew Launcher: diff --git a/_pages/ro_RO/homebrew-launcher-(soundhax).txt b/_pages/ro_RO/homebrew-launcher-(soundhax).txt index 2d3ec0c63c..5b3455629d 100644 --- a/_pages/ro_RO/homebrew-launcher-(soundhax).txt +++ b/_pages/ro_RO/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Homebrew Launcher-ul are multe puncte de intrare sau metode de a fi accesat. Soundhax este compatibil cu versiunile 9.0.0 până la 11.3.0 în regiunile EUR, JPN, KOR și USA. -Asigurați-vă că dispozitivul are pornit comunicarea fără fir pentru că udsploit (folosit în pagina următoare) va avea nevoie de modulul fără fir să fie activ ca să funcționeze, și unele dispozitive (New 3DS, New 2DS și Old 2DS) nu pot ajusta comunicarea fără fir din Homebrew Launcher. Comunicarea fără fir trebuie doar să fie pornită; nu este necesar să conectați dispozitivul la un punct de rețea. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ Asta înseamnă că folosind o actualizare cu cardul de la o versiune care conț #### Ce aveți nevoie -* [Kit-ul de începător](http://smealum.github.io/ninjhax2/starter.zip) în Homebrew -* Ultima versiune de [Soundhax](http://soundhax.com/) *(pentru dispozitivul și regiunea dumneavoastră)* -* Cea mai recentă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Cea mai recentă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, și nici cel `ntr`)* -* Cea mai recentă versiune de [safehax](https://github.com/TiniVi/safehax/releases/latest) -* Cea mai recentă versiune de [udsploit](https://github.com/smealum/udsploit/releases/latest) -* Cea mai nouă versiune de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fișierul `.7z`)* -* [Payload-ul otherapp](https://smealum.github.io/3ds/#otherapp) *(pentru versiunea și regiunea dumneavoastră)* +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instrucțiuni 1. Închideți dispozitivul 1. Introduceți cardul SD în calculator -1. Copiați _conținutul de pe_ `starter.zip` în rădăcina cardului SD -1. Copiați fișierul Soundhax `.m4a` în rădăcina cardului SD -1. Copiați payload-ul otherapp în rădăcina cardului SD și redenumiți-l în`otherapp.bin` -1. Copiați `boot.firm` de la Luma3DS `.7z` în rădăcina cardului SD -1. Creați un folder numit `boot9strap` în rădăcina cardului SD -1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD -1. Copiați `safehax.3dsx` în folderul `/3ds/` de pe cardul SD -1. Copiați `udsploit.3dsx` în folderul `/3ds/` de pe cardul SD -1. Copiați `SafeB9SInstaller.bin` din arhiva `.zip` SafeB9SInstaller în rădăcina cardului SD și redenumiți `SafeB9SInstaller.bin` în `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul 1. Lansați Nintendo 3DS Sound @@ -57,15 +42,11 @@ Asta înseamnă că folosind o actualizare cu cardul de la o versiune care conț 1. Mergeți în `/SDCARD`, apoi apăsați "<3 nedwill 2016" + S-ar putea să fie nevoie să încercați de mai multe ori + Dacă se blochează, închideți dispozitivul forțat ținând apăsat butonul de pornire și încercați din nou - + Dacă vedeți doar un ecran roșu, asigurați-vă că ați copiat _conținuturile_ folderului 'starter' în rădăcina cardului SD ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Dispozitivul dumneavoastră ar trebui să încarce Hombrew Launcher-ul - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/ro_RO/updating-b9s.txt b/_pages/ro_RO/updating-b9s.txt index e8d22c7852..3819707d1a 100644 --- a/_pages/ro_RO/updating-b9s.txt +++ b/_pages/ro_RO/updating-b9s.txt @@ -51,6 +51,9 @@ Pentru toți pașii din această secțiune, suprascrieți fișierele existente d ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Lansați GodMode9 ținând apăsat (Start) în timpul pornirii 1. Dacă vi se cere să faceți o copie de rezervă a fișierelor esențiale, apăsați (A) pentru a o realiza, apoi apăsați (A) ca să continuați după ce s-a terminat 1. Apăsați (Home) pentru a arăta meniul de acțiuni diff --git a/_pages/ru_RU/a9lh-to-b9s.txt b/_pages/ru_RU/a9lh-to-b9s.txt index 9b4e0785d8..4fdc661df1 100644 --- a/_pages/ru_RU/a9lh-to-b9s.txt +++ b/_pages/ru_RU/a9lh-to-b9s.txt @@ -32,7 +32,7 @@ title: "С A9LH до B9S" Обратите внимание, что требуемый ниже файл с именем `secret_sector.bin` это тот же, что присутствовал в различных версиях архива `data_input.zip`. Если у вас уже есть этот файл где-то на диске, вы можете использовать его, вместо загрузки файла ниже. {: .notice--info} -Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console. Если у вас не New 3DS, вам не нужен `secret_sector.bin`. +Обратите внимание, что `secret_sector.bin` необходим только на New 3DS для отката эксплойта arm9loaderhax, поэтому он не требуется для установки boot9strap на не взломанную консоль. Если у вас не New 3DS, вам не нужен `secret_sector.bin`. {: .notice--info} * - **Только пользователи New 3DS:** [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce) @@ -96,7 +96,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load + **"Show NAND or user string in System Settings"** 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться -##### Section IV - Updating the System +##### Часть IV - Обновление системы Если до начала этого руководства у вас уже был установлен EmuNAND, и вы хотите перенести содержимое EmuNAND в SysNAND с кастомной прошивкой - сейчас самый подходящий момент. Выполните действия из раздела [перенос EmuNAND](move-emunand), прежде чем приступить к этой части. {: .notice--info} @@ -141,12 +141,15 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load 1. Скопируйте `_nandmin_###.bin` из папки `/gm9/out/` на SD-карте в безопасное место на вашем компьютере + Сделайте несколько резервных копий в нескольких местах (например в облачном хранилище) + Эти бэкапы позволят восстановить консоль, если впоследствии что-то пойдёт не так - + Replace your old arm9loaderhax NAND backup with this new boot9strap one + + Замените ваш старый бэкап NAND с arm9loaderhax на новый с boot9strap 1. После копирования удалите `_nandmin_###.bin` из папки `/gm9/out/` на SD-карте 1. Вставьте SD-карту обратно в консоль ##### Часть VIII - Очистка SD-карты +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Нажмите кнопку (Home) для вызова меню 1. Выберите "More..." 1. Выберите "Scripts..." diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt index 0c7080567e..657fc15404 100644 --- a/_pages/ru_RU/finalizing-setup.txt +++ b/_pages/ru_RU/finalizing-setup.txt @@ -8,19 +8,19 @@ title: "Завершение установки" Мы используем Luma3DS от [AuroraWright](https://github.com/AuroraWright/), чтобы запускать пропатченный SysNAND напрямую, поэтому необходимость в каком-либо виде EmuNAND полностью пропадает, что значительно упрощает использование взломанной 3DS и экономит место на SD-карте. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS will need to download some files on your device. +Убедитесь, что Беспроводной режим включен и консоль подключена к интернету. OCS будет нужно скачать несколько файлов на ваше устройство. В процессе мы установим и настроим следующие программы: + **FBI** *(установщик приложений и игр в формате CIA)* -+ **Anemone3DS** *(installs custom themes)* ++ **Anemone3DS** *(установка пользовательских тем)* + **Luma3DS Updater** *(Удобное обновление CFW)* + **GodMode9** *(многофункциональная утилита для работы с NAND и картриджами)* + **Homebrew Launcher Loader** *(запускает Homebrew Launcher в качестве обычного приложения благодаря магии Rosalina)* #### Инструкция -##### Section I - Updating the System +##### Часть I - Обновление системы Если вы, следуя предыдущей версии этого руководства, выполнили CTRTransfer на прошивку 2.1.0 на *New 3DS*, [Восстановите бэкап NAND](godmode9-usage#nand_restore), прежде чем приступить к этой части. {: .notice--danger} @@ -33,7 +33,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the + При появлении ошибки, поставьте в настройках подключения, в настройках DNS "Получать DNS автоматически" в положение "Да" + Если вы все еще получаете ошибку и версия вашего NAND ниже, [выполните CTRTransfer](ctrtransfer) и попробуйте обновиться еще раз -##### Section II - Launching OCS +##### Часть II - Запуск OCS 1. Запустите приложение Загружаемая игра 1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina @@ -44,21 +44,21 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. Нажмите (B) для выхода из главного меню Rosalina 1. Нажмите (Home), затем закройте приложение Загружаемая игра 1. Запустите приложение Загружаемая игра -1. Your device should load OCS +1. Ваше устройство должно загрузить OCS -##### Section III - OCS +##### Часть III - OCS -1. Press (A) to begin -1. Wait for the downloads and installs to complete -1. Press (Start) to exit when prompted +1. Нажмите (A), чтобы начать +1. Дождитесь завершения загрузки и установки +1. Для выхода, при появлении запроса, нажмите (Start) 1. Нажмите (Home), затем закройте приложение Загружаемая игра -##### Section IV - DSP Dump +##### Часть IV - DSP Dump 1. Запустите DSP1 1. После завершения нажмите (B) чтобы удалить это приложение и вернуться в меню HOME -##### Section V - CTRNAND Luma3DS +##### Часть V - CTRNAND Luma3DS 1. Запустите GodMode9, держа нажатой кнопку (Start) во время загрузки 1. Если вам предложат создать бэкап важных файлов, нажмите кнопку (A) чтобы сделать это, затем нажмите (A) чтобы продолжить после завершения @@ -71,7 +71,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. Нажмите (A), чтобы продолжить 1. Нажмите (A) чтобы восстановить запрет на запись -##### Section VI - Backup SysNAND +##### Часть VI - Создание бэкапа SysNAND 1. Нажмите кнопку (Home) для вызова меню 1. Выберите "More..." @@ -88,7 +88,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. После копирования удалите `_nandmin_###.bin` из папки `/gm9/out/` на SD-карте 1. Вставьте SD-карту обратно в консоль -##### Section VII - Cleanup SD Card +##### Часть VII - Очистка SD-карты 1. Нажмите кнопку (Home) для вызова меню 1. Выберите "More..." @@ -136,5 +136,5 @@ ___ Для справки об использовании различных функций Luma3DS обратитесь к её [вики](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) (англ.). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +Для получения информации по установке пользовательских тем и экранов-заставок, посетите [Theme Plaza](https://themeplaza.eu/). {: .notice--success} \ No newline at end of file diff --git a/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt index 8d484dc6df..97a7d27065 100644 --- a/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt @@ -41,19 +41,19 @@ title: "Прошивка ntrboot (Две консоли 3DS)" 1. Запустите Luma3DS chainloader, держа нажатой кнопку (Start) во время загрузки на **исходной 3DS** 1. Выберите "ntrboot_flasher" -1. Read the red screen warning +1. Прочтите предупреждение на красном экране 1. Нажмите (A), чтобы продолжить -1. Select your flashcart - + If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option +1. Выберите ваш флешкартридж + + Если вашего флешкартриджа нет в списке на верхнем экране, прочтите информацию о каждой из опций на нижнем экране 1. Выберите "Dump Flash" 1. Дождитесь окончания процесса 1. Нажмите (A), чтобы продолжить -1. Press (A) to return to the main menu +1. Нажмите (A) для возврата в главное меню 1. Выберите "Inject Ntrboot" -1. Press (A) for retail unit ntrboot +1. Нажмите (A) чтобы выбрать "retail unit ntrboot" 1. Дождитесь окончания процесса -1. Press (A) to return to the main menu -1. Select "Exit" to power off **the source 3DS** +1. Нажмите (A) для возврата в главное меню +1. Выберите "Exit" чтобы выключить **исходную 3DS** ___ diff --git a/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt b/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt index 6da7b1bf1b..c3ce67e29d 100644 --- a/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ title: "Прошивка ntrboot (Одна консоль 3DS)" + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Обратите внимание, что в некоторых редких случаях процесс прошивки может **брикнуть** поддельный флешкартридж и навсегда сделать его нерабочим. Это маловероятно, но тем не менее поддерживаются только оригинальные флешкартриджи из списка. Чтобы уменьшить вероятность получения поддельного картриджа, рекомендуется использовать проверенный сайт для покупки флешкартриджа (например [NDS Card](http://www.nds-card.com/)) {: .notice--danger} @@ -36,12 +38,12 @@ title: "Прошивка ntrboot (Одна консоль 3DS)" 1. Запустите `ak2i_ntrcardhax_flasher_dsi.nds` на консоли, используя флешкартридж 1. Нажмите (A), чтобы продолжить -1. Use (Up) and (Down) to select your flashcart +1. Используйте (Вверх) и (Вниз) чтобы выбрать ваш флешкартридж 1. Нажмите (A), чтобы продолжить 1. Нажмите (A), чтобы выбрать "inject ntrboothax" 1. Нажмите (A), чтобы выбрать "RETAIL" 1. Нажмите (A), чтобы продолжить -1. Select "EXIT" +1. Выберите "EXIT" ___ diff --git a/_pages/ru_RU/flashing-ntrboot-(dsi).txt b/_pages/ru_RU/flashing-ntrboot-(dsi).txt index 3afb251ee6..a163303867 100644 --- a/_pages/ru_RU/flashing-ntrboot-(dsi).txt +++ b/_pages/ru_RU/flashing-ntrboot-(dsi).txt @@ -21,7 +21,7 @@ title: "Прошивка ntrboot (DSi)" * Флешкартридж, совместимый с ntrboot * Две консоли - + **The source DSi**: the Nintendo DSi which is compatible with your flashcart + + **Исходная DSi**: Nintendo DSi, совместимая с вашим флешкартриджем + **Целевая 3DS**: консоль семейства 3DS с официальной прошивкой * Свежая версия [ak2i_ntrcardhax_flasher](https://github.com/d3m3vilurr/ak2i_ntrcardhax_flasher/releases/latest) *(`dsi`-версия; стандартная версия не подходит)* @@ -29,22 +29,22 @@ title: "Прошивка ntrboot (DSi)" ##### Часть I - Подготовительные работы -1. Power off **the source DSi** +1. Выключите **исходную DSi** 1. Вставьте SD-карту флешкартриджа в компьютер 1. Скопируйте `ak2i_ntrcardhax_flasher_dsi.nds` на SD-карту флешкартриджа 1. Вставьте SD-карту флешкартриджа обратно во флешкартридж -1. Insert your ntrboot compatible DS / DSi flashcart into **the source DSi** +1. Вставьте ваш DS / DSi флешкартридж, совместимый с ntrboot, в **исходную DSi** ##### Часть II - Прошивка ntrboot -1. Launch `ak2i_ntrcardhax_flasher_dsi.nds` on **the source DSi** using your flashcart +1. Запустите `ak2i_ntrcardhax_flasher_dsi.nds` на **исходной DSi**, используя флешкартридж 1. Нажмите (A), чтобы продолжить -1. Use (Up) and (Down) to select your flashcart +1. Используйте (Вверх) и (Вниз) чтобы выбрать ваш флешкартридж 1. Нажмите (A), чтобы продолжить 1. Нажмите (A), чтобы выбрать "inject ntrboothax" 1. Нажмите (A), чтобы выбрать "RETAIL" 1. Нажмите (A), чтобы продолжить -1. Select "EXIT" +1. Выберите "EXIT" ___ diff --git a/_pages/ru_RU/flashing-ntrboot-(nds).txt b/_pages/ru_RU/flashing-ntrboot-(nds).txt index 57a41e8d17..9508014f25 100644 --- a/_pages/ru_RU/flashing-ntrboot-(nds).txt +++ b/_pages/ru_RU/flashing-ntrboot-(nds).txt @@ -16,7 +16,7 @@ title: "Прошивка ntrboot (NDS)" + R4i Ultra + R4 3D Revolution + Infinity 3 R4i - + DSTT ([some flash chips only!](https://gist.github.com/Hikari-chin/6b48f1bb8dd15136403c15c39fafdb42)) + + DSTT ([только некоторые чипы!](https://gist.github.com/Hikari-chin/6b48f1bb8dd15136403c15c39fafdb42)) Обратите внимание, что в некоторых редких случаях процесс прошивки может **брикнуть** поддельный флешкартридж и навсегда сделать его нерабочим. Это маловероятно, но тем не менее поддерживаются только оригинальные флешкартриджи из списка. Чтобы уменьшить вероятность получения поддельного картриджа, рекомендуется использовать проверенный сайт для покупки флешкартриджа (например [NDS Card](http://www.nds-card.com/)) {: .notice--danger} @@ -43,7 +43,7 @@ title: "Прошивка ntrboot (NDS)" 1. Запустите `ak2i_ntrcardhax_flasher.nds` на **исходной NDS / NDSL**, используя флешкартридж 1. Нажмите (A), чтобы продолжить -1. Use (Up) and (Down) to select your flashcart +1. Используйте (Вверх) и (Вниз) чтобы выбрать ваш флешкартридж 1. Нажмите (A), чтобы продолжить 1. Нажмите (X), чтобы выбрать "load flashrom" 1. Нажмите (A), чтобы продолжить diff --git a/_pages/ru_RU/get-started-(new-3ds).txt b/_pages/ru_RU/get-started-(new-3ds).txt index 5619850aa4..7a6367bdfe 100644 --- a/_pages/ru_RU/get-started-(new-3ds).txt +++ b/_pages/ru_RU/get-started-(new-3ds).txt @@ -6,9 +6,9 @@ title: "Начало (New 3DS)" Кроме того, последнее число вашей версии прошивки (после тире) относится к версии браузера. В настоящее время версия браузера не имеет значения для New 3DS в данном руководстве. -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** +**Если вы не можете следовать инструкциям для конкретной версии из-за невыполненных предварительных условий, обратите внимание на строку "Все версии". Эти методы работают вне зависимости от версии прошивки.** -For all versions you can also [Cart Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Любую версию прошивки можно обновить на более высокую из этой же колонки [с помощью картриджа](cart-update) (или выполнив Обновление системы), и после этого продолжить выполнять инструкцию. Версия программного обеспечения отображается в правом нижнем углу верхнего экрана в приложении Системные настройки (System settings). @@ -47,7 +47,7 @@ For all versions you can also [Cart Update](cart-update) (or use a standard syst 11.4.0 11.4.0 - Use an "All Versions" Method + Используйте метод "Все версии" 11.5.0 diff --git a/_pages/ru_RU/get-started-(old-3ds).txt b/_pages/ru_RU/get-started-(old-3ds).txt index 191994a8c8..85225e15a0 100644 --- a/_pages/ru_RU/get-started-(old-3ds).txt +++ b/_pages/ru_RU/get-started-(old-3ds).txt @@ -8,9 +8,9 @@ title: "Начало (Old 3DS)" Например, если у вас версия прошивки "5.0.0-0E", необходимо выбрать ячейку на пересечении колонки "Без браузера" и ряда "С 5.0.0 по 5.1.0" так как версия системы находится в этом диапазоне и в системе не установлен браузер. -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** +**Если вы не можете следовать инструкциям для конкретной версии из-за невыполненных предварительных условий, обратите внимание на строку "Все версии". Эти методы работают вне зависимости от версии прошивки.** -For all versions you can also [Cart Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Любую версию прошивки можно обновить на более высокую из этой же колонки [с помощью картриджа](cart-update) (или выполнив Обновление системы), и после этого продолжить выполнять инструкцию. Версия программного обеспечения отображается в правом нижнем углу верхнего экрана в приложении Системные настройки (System settings). @@ -38,18 +38,18 @@ For all versions you can also [Cart Update](cart-update) (or use a standard syst 1.0.0 2.0.0 - Use an "All Versions" Method + Используйте метод "Все версии" 2.1.0 2.1.0 - Use an "All Versions" Method + Используйте метод "Все версии" Установка boot9strap (2xrsa) 2.2.0 3.1.0 - Use an "All Versions" Method + Используйте метод "Все версии" 4.0.0 @@ -60,7 +60,7 @@ For all versions you can also [Cart Update](cart-update) (or use a standard syst 5.0.0 5.1.0 - Use an "All Versions" Method + Используйте метод "Все версии" Установка boot9strap (Браузер) @@ -72,7 +72,7 @@ For all versions you can also [Cart Update](cart-update) (or use a standard syst 7.0.0 8.1.0 - Use an "All Versions" Method + Используйте метод "Все версии" Установка boot9strap (Браузер) @@ -82,7 +82,7 @@ For all versions you can also [Cart Update](cart-update) (or use a standard syst 11.4.0 11.4.0 - Use an "All Versions" Method + Используйте метод "Все версии" 11.5.0 diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt index 4dbf370f74..c2d132985c 100644 --- a/_pages/ru_RU/home.txt +++ b/_pages/ru_RU/home.txt @@ -11,6 +11,9 @@ header: excerpt: "Полное руководство по прошивке 3DS,
от начала до boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} Это руководство применимо _только_ для консолей, продающихся в рознице. Приставки для разработчиков невозможно прошить по этой инструкции! Если у вас версия для разработчиков ("PANDA" или "SNAKE"), воспользуйтесь [этой инструкцией](https://dev.3ds.guide) (англ.). @@ -24,9 +27,6 @@ excerpt: "Полное руководство по прошивке 3DS,
Руководству необходима *ваша* помощь в раздаче [этих](https://3ds.guide/rss.xml) файлов! {: .notice--success} -Прочитайте все вводные страницы прежде чем начать. -{: .notice--warning} - ## Что такое Homebrew? Под словом [**Homebrew (хомбрю)**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) (англ.) обычно подразумевают программное обеспечение, не авторизованное Nintendo. В качестве примера можно привести эмуляторы консолей предыдущих поколений, различные программы для бэкапа и редактирования сохранений, разные самописные игры. @@ -55,7 +55,7 @@ Boot9strap имеет множество преимуществ перед др ## Что позволяет кастомная прошивка? + Играть в любые игры, доступные на картриджах или в eShop, вне зависимости от региона -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Изменять внешний вид меню HOME при помощи пользовательских [тем и экранов-заставок](https://themeplaza.eu/) + Использовать "ROM hacks" для имеющихся игр + Делать скриншоты игр и приложений + [Делать резервные копии, редактировать и восстанавливать](https://gbatemp.net/threads/413143/) сохранения для многих игр diff --git a/_pages/ru_RU/homebrew-launcher-(alternatives).txt b/_pages/ru_RU/homebrew-launcher-(alternatives).txt index 946390a1b1..eaff51e9d9 100644 --- a/_pages/ru_RU/homebrew-launcher-(alternatives).txt +++ b/_pages/ru_RU/homebrew-launcher-(alternatives).txt @@ -6,17 +6,19 @@ Homebrew Launcher имеет множество точек входа, или м Если вы не можете использовать browserhax (см. таблицу ниже), у вас нет одной из этих игр и другой 3DS с доступом к Homebrew Launcher, самый дешевый вариант это купить "Nintendo Selects" версию [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (убедитесь, что покупаете картридж своего региона) и [Powersaves](https://amzn.to/2fb3VY7) (совместим со всеми регионами), затем использовать oot3dhax из таблицы ниже. -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. +Убедитесь, что Беспроводной режим включен и консоль подключена к интернету. OCS (используется на следующей странице) будет нужно скачать несколько файлов на ваше устройство. #### Что понадобится -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) +* [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(для вашей версии и региона)* #### Инструкция 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Скопируйте `boot.3dsx` (OCS) в корень SD-карты +1. Скопируйте otherapp payload в корень вашей SD-карты и переименуйте его в `otherapp.bin` 1. Вставьте SD-карту обратно в консоль 1. Включите консоль 1. Используйте одну из следующих точек входа для запуска Homebrew Launcher: @@ -50,7 +52,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the -1. Your device should load OCS +1. Ваше устройство должно загрузить OCS Следующий шаг: [Установка boot9strap (Homebrew Launcher)](installing-boot9strap-(homebrew-launcher)) {: .notice--primary} diff --git a/_pages/ru_RU/homebrew-launcher-(soundhax).txt b/_pages/ru_RU/homebrew-launcher-(soundhax).txt index b369c2ac0a..f3d6511519 100644 --- a/_pages/ru_RU/homebrew-launcher-(soundhax).txt +++ b/_pages/ru_RU/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Homebrew Launcher имеет множество точек входа, или м Soundhax совместим с версиями прошивки от 9.0.0 до 11.3.0 в регионах EUR, JPN, KOR и USA. -Убедитесь, что Беспроводной режим (Wireless Communication) включен, так как udsploit (используется на следующей странице) потребует активный беспроводной модуль для своей работы, и некоторые консоли (New 3DS, New 2DS и Old 2DS) не могут включить Беспроводной режим, находясь в Homebrew Launcher. Достаточно включить Беспроводной режим (Wireless Communication); наличие соединения с точкой доступа не обязательно. +Убедитесь, что Беспроводной режим включен и консоль подключена к интернету. OCS (используется на следующей странице) будет нужно скачать несколько файлов на ваше устройство. {% capture notice-1 %} @@ -19,32 +19,17 @@ Soundhax совместим с версиями прошивки от 9.0.0 до #### Что понадобится -* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) -* Последняя версия [Soundhax](http://soundhax.com/) *(для вашего устройства и региона)* -* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* -* Свежая версия [safehax](https://github.com/TiniVi/safehax/releases/latest) -* Свежая версия [udsploit](https://github.com/smealum/udsploit/releases/latest) -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)* -* [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(для вашей версии и региона)* +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Инструкция 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Скопируйте _содержимое_ `starter.zip` в корень вашей SD-карты -1. Скопируйте Soundhax `.m4a` в корень вашей SD-карты -1. Скопируйте otherapp payload в корень вашей SD-карты и переименуйте его в `otherapp.bin` -1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты -1. Создайте папку `boot9strap` в корне SD-карты -1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты -1. Скопируйте `safehax.3dsx` в папку `/3ds/` на SD-карте -1. Скопируйте `udsploit.3dsx` в папку `/3ds/` на SD-карте -1. Скопируйте `SafeB9SInstaller.bin` из `.zip-архива` SafeB9SInstaller в корень SD-карты и переименуйте `SafeB9SInstaller.bin` в `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Скопируйте `boot.3dsx` (OCS) в корень SD-карты +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Вставьте SD-карту обратно в консоль 1. Включите консоль 1. Запустите приложение Звук Nintendo 3DS (Nintendo 3DS Sound) @@ -57,15 +42,11 @@ Soundhax совместим с версиями прошивки от 9.0.0 до 1. Перейдите в `/SDCARD`, затем начните воспроизведение "<3 nedwill 2016" + Может потребоваться несколько попыток + При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова - + Если вы видите красный экран, убедитесь что вы скопировали _содержимое_ папки `starter` в корень вашей SD-карты ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Консоль должна загрузиться в Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Ваше устройство должно загрузить OCS ___ diff --git a/_pages/ru_RU/installing-boot9strap-(2xrsa).txt b/_pages/ru_RU/installing-boot9strap-(2xrsa).txt index 14ce3be0a0..a757df72dc 100644 --- a/_pages/ru_RU/installing-boot9strap-(2xrsa).txt +++ b/_pages/ru_RU/installing-boot9strap-(2xrsa).txt @@ -7,7 +7,7 @@ title: "Установка boot9strap (2xrsa)" * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Инструкция @@ -15,7 +15,7 @@ title: "Установка boot9strap (2xrsa)" 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Скопируйте `boot.3dsx` (OCS) в корень SD-карты 1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты 1. Создайте папку `boot9strap` в корне SD-карты 1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты diff --git a/_pages/ru_RU/installing-boot9strap-(browser).txt b/_pages/ru_RU/installing-boot9strap-(browser).txt index 404776f7cc..627c665da0 100644 --- a/_pages/ru_RU/installing-boot9strap-(browser).txt +++ b/_pages/ru_RU/installing-boot9strap-(browser).txt @@ -9,7 +9,7 @@ title: "Установка boot9strap (Браузер)" * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Инструкция @@ -17,7 +17,7 @@ title: "Установка boot9strap (Браузер)" 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Скопируйте `boot.3dsx` (OCS) в корень SD-карты 1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты 1. Создайте папку `boot9strap` в корне SD-карты 1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt index c6a5aa109a..5de7f7fa2b 100644 --- a/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt +++ b/_pages/ru_RU/installing-boot9strap-(dsiware-game-injection).txt @@ -27,7 +27,7 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)" * Свежая версия [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) * 11.4.0 / 11.5.0 (обе версии имеют одинаковую версию FIRM) `.firm`, соответствующий **целевой 3DS** ("OLD" для Old 3DS, или "NEW" для New 3DS): + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -136,7 +136,7 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)" 1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты 1. Скопируйте `boot.nds` (B9STool) в корень SD-карты **целевой 3DS** -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. Скопируйте `boot.nds` (OCS) в корень SD-карты **целевой 3DS** 1. Создайте папку `boot9strap` в корне SD-карты **целевой 3DS** 1. Скопируйте 11.5.0 `.firm`, соответствующий **целевой 3DS** в папку `boot9strap` на SD-карте **целевой 3DS** 1. Скопируйте `boot9strap.firm` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты diff --git a/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt b/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt index 5822dd1da8..1cb4a4deb4 100644 --- a/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt +++ b/_pages/ru_RU/installing-boot9strap-(dsiware-save-injection).txt @@ -26,7 +26,7 @@ title: "Установка boot9strap (Инъекция в сохранения * Свежая версия [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) * 11.4.0 / 11.5.0 (обе версии имеют одинаковую версию FIRM) `.firm`, соответствующий **целевой 3DS** ("OLD" для Old 3DS, или "NEW" для New 3DS): + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -142,7 +142,7 @@ title: "Установка boot9strap (Инъекция в сохранения 1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты 1. Скопируйте `boot.nds` (B9STool) в корень SD-карты **целевой 3DS** -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. Скопируйте `boot.nds` (OCS) в корень SD-карты **целевой 3DS** 1. Создайте папку `boot9strap` в корне SD-карты **целевой 3DS** 1. Скопируйте 11.5.0 `.firm`, соответствующий **целевой 3DS** в папку `boot9strap` на SD-карте **целевой 3DS** 1. Скопируйте `boot9strap.firm` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты diff --git a/_pages/ru_RU/installing-boot9strap-(hardmod).txt b/_pages/ru_RU/installing-boot9strap-(hardmod).txt index e8819a809a..702b42c720 100644 --- a/_pages/ru_RU/installing-boot9strap-(hardmod).txt +++ b/_pages/ru_RU/installing-boot9strap-(hardmod).txt @@ -17,7 +17,7 @@ title: "Установка boot9strap (Hardmod)" * Свежая версия [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Пользователи Windows могут воспользоваться скомпилированным `.exe-файлом`, тогда как пользователям Mac и Linux нужно иметь в системе установленный [Python 3](https://www.python.org/downloads/) для запуска `.py-файлов` * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) * `.firm`, соответствующий вашему устройству и версии ПО: | Версия(и) | Kernel | Old 3DS или Old 2DS | New 3DS или New 2DS | @@ -54,7 +54,7 @@ title: "Установка boot9strap (Hardmod)" ##### Часть I - Подготовительные работы -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Скопируйте `boot.3dsx` (OCS) в корень SD-карты 1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты 1. Скопируйте папку hardmod-b9s-installer из `.zip-архива` hardmod-b9s-installer на ваш компьютер 1. Скопируйте загруженный `.firm` в папку hardmod-b9s-installer на вашем компьютере diff --git a/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt b/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt index 6796f26dbf..384a8b0c23 100644 --- a/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt +++ b/_pages/ru_RU/installing-boot9strap-(homebrew-launcher).txt @@ -6,14 +6,14 @@ title: "Установка boot9strap (Homebrew Launcher)" #### Инструкция -##### Section I - OCS +##### Часть I - OCS -1. Press (A) to begin -1. Wait for the downloads to complete -1. Wait for the exploit to run +1. Нажмите (A), чтобы начать +1. Дождитесь завершения загрузок +1. Дождитесь запуска эксплойта + Может потребоваться несколько попыток - + If it freezes, just force the console to power off by holding the power button, then relaunch OCS to try again - + If you get a "PM INIT FAILED" error, try replacing the `safehax.3dsx` file in the `/3ds/` folder on your SD card with the one from the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19) + + При зависании отключите питание консоли, зажав кнопку питания, затем перезапустите OCS, и попробуйте снова + + Если появляется ошибка "PM INIT FAILED", попробуйте заменить файл `safehax.3dsx` в папке `/3ds/` на SD-карте файлом из [safehax версии r19](https://github.com/TiniVi/safehax/releases/tag/r19) 1. Если эксплойт сработал, запустится SafeB9SInstaller ##### Часть II - Установка boot9strap diff --git a/_pages/ru_RU/installing-boot9strap-(mset).txt b/_pages/ru_RU/installing-boot9strap-(mset).txt index 1841a6d89a..43697ea9b2 100644 --- a/_pages/ru_RU/installing-boot9strap-(mset).txt +++ b/_pages/ru_RU/installing-boot9strap-(mset).txt @@ -9,7 +9,7 @@ title: "Установка boot9strap (MSET)" * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) * Любой флешкартридж для DS, работающий на вашей версии прошивки #### Инструкция @@ -18,7 +18,7 @@ title: "Установка boot9strap (MSET)" 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Скопируйте `boot.3dsx` (OCS) в корень SD-карты 1. Скопируйте файл `boot.firm` из `.7z-архива` Luma3DS в корень SD-карты 1. Создайте папку `boot9strap` в корне SD-карты 1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты diff --git a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt index 4eaa193f5c..d4c21b79ef 100644 --- a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt +++ b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt @@ -9,7 +9,7 @@ title: "Установка boot9strap (ntrboot)" * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* Свежая версия [OCS](https://github.com/Pirater12/ocs/releases/latest) #### Инструкция @@ -17,7 +17,7 @@ title: "Установка boot9strap (ntrboot)" 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Скопируйте `boot.3dsx` (OCS) в корень SD-карты 1. Скопируйте `SafeB9SInstaller.firm` в корень SD-карты и переименуйте его в `boot.firm` 1. Создайте папку `boot9strap` в корне SD-карты 1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты @@ -68,20 +68,20 @@ ___ ___ -The following is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions). +Это дополнительный раздел, который позволяет вернуть флешкартридж в исходное состояние (чтобы использовать флешкартридж для его стандартных функций). Обратите внимание, что Acekard 2i сохраняет возможность запускать `.nds` файлы, пока на нем установлен эксплойт ntrboot. Это относится только к случаю, когда Acekard 2i используется на 3DS с установленной кастомной прошивкой! Пока эксплойт ntrboot установлен на Acekard 2i, флешкартридж не может запускать `.nds` файлы на не прошитых консолях NDS, NDSL, DSi, или 3DS. -Do not follow this section until you have completed the rest of the instructions on this page. +Не приступайте к этой части, пока вы не выполнили остальные инструкции на этой странице. -##### Section V - Removing ntrboot +##### Часть V - Удаление ntrboot ###### Что понадобится * Свежая версия [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest) -* The flashrom backup corresponding to your flashcart - + Note that if you followed "Flashing ntrboot (3DS Multi System)", the flashrom already exists in the correct location and does not need to be downloaded - + If you do not know which HW revision you have, just try all of them. Only the correct one will allow your flashcart to launch properly from home menu, but flashing the wrong one will not brick the cart: +* Резервная копия прошивки, соответствующая вашему флешкартриджу + + Обратите внимание, что если вы следовали инструкции "Прошивка ntrboot (Две консоли 3DS)", резервная копия уже существует в нужном месте, и скачивать ее не требуется + + Если вы не знаете HW revision вашего флешкартриджа, просто попробуйте их все. Только правильная версия позволит запустить флешкартридж из меню HOME, но прошивка неправильной версии не испортит картридж: + - [`R4i_Gold_3DS_(HW_A7)-Flashrom.zip`](magnet:?xt=urn:btih:fd1bc5c522988379ee931db45f82b223241ae729&dn=R4i_Gold_3DS_%28HW_A7%29-Flashrom.zip&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce) *(Также подходит для **R4i Gold 3DS RTS**)* + - [`R4i_Gold_3DS_(HW_A6)-Flashrom.zip`](magnet:?xt=urn:btih:ed75f8b81b78dad0d98cea59e38f3f61a80d981d&dn=R4i_Gold_3DS_%28HW_A6%29-Flashrom.zip&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce) *(Также подходит для **R4 3D Revolution**)* + - [`R4i_Gold_3DS_(HW_A5)-Flashrom.zip`](magnet:?xt=urn:btih:e69774d8a950879e93b18a5c1ccd36ab305b4acd&dn=R4i_Gold_3DS_%28HW_A5%29-Flashrom.zip&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce) *(Также подходит для **Infinity 3 R4i**)* @@ -101,12 +101,12 @@ Do not follow this section until you have completed the rest of the instructions 1. Вставьте SD-карту обратно в консоль 1. Вставьте в консоль ваш DS / DSi флешкартридж, совместимый с ntrboot 1. Запустите ntrboot_flasher, держа нажатой кнопку (Start) во время загрузки -1. Read the red screen warning +1. Прочтите предупреждение на красном экране 1. Нажмите (A), чтобы продолжить -1. Select your flashcart - + If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option +1. Выберите ваш флешкартридж + + Если вашего флешкартриджа нет в списке на верхнем экране, прочтите информацию о каждой из опций на нижнем экране 1. Выберите "Restore Flash" -1. Press (A) to proceed +1. Нажмите (A) чтобы продолжить 1. Дождитесь окончания процесса -1. Press (A) to return to the main menu -1. Select "Exit" to power off your device \ No newline at end of file +1. Нажмите (A) для возврата в главное меню +1. Выберите "Exit" чтобы выключить консоль \ No newline at end of file diff --git a/_pages/ru_RU/ntrboot.txt b/_pages/ru_RU/ntrboot.txt index 0a6ca0d58e..58ac6abebe 100644 --- a/_pages/ru_RU/ntrboot.txt +++ b/_pages/ru_RU/ntrboot.txt @@ -15,7 +15,7 @@ title: "ntrboot" + R4i Ultra + R4 3D Revolution + Infinity 3 R4i - + DSTT ([some flash chips only!](https://gist.github.com/Hikari-chin/6b48f1bb8dd15136403c15c39fafdb42)) + + DSTT ([только некоторые чипы!](https://gist.github.com/Hikari-chin/6b48f1bb8dd15136403c15c39fafdb42)) ![]({{ base_path }}/images/screenshots/ntrboot-flashcarts.png) {: .notice--info} diff --git a/_pages/ru_RU/updating-b9s.txt b/_pages/ru_RU/updating-b9s.txt index c618198d11..28c82b4025 100644 --- a/_pages/ru_RU/updating-b9s.txt +++ b/_pages/ru_RU/updating-b9s.txt @@ -47,9 +47,12 @@ title: "Обновление B9S" 1. Запустите SafeB9SInstaller, нажав кнопку (A) 1. Дождитесь окончания всех проверок безопасности 1. При появлении запроса, введите указанную комбинацию кнопок для установки boot9strap -1. Once it has completed, hold (Start) while pressing (A) to reboot your device to the Luma3DS chainloader +1. После завершения нажмите (A), удерживая кнопку (Start), чтобы запустить меню Luma3DS chainloader -##### Section III - Cleanup SD Card +##### Часть III - Очистка SD-карты + +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} 1. Запустите GodMode9, держа нажатой кнопку (Start) во время загрузки 1. Если вам предложат создать бэкап важных файлов, нажмите кнопку (A) чтобы сделать это, затем нажмите (A) чтобы продолжить после завершения @@ -63,5 +66,5 @@ title: "Обновление B9S" ___ -It is recommended that you use Luma3DS Updater to update your Luma3DS installation after you have completed the boot9strap update. +Рекомендуется использовать Luma3DS Updater, чтобы обновить Luma3DS после завершения обновления boot9strap. {: .notice--info} \ No newline at end of file diff --git a/_pages/sr_SP/a9lh-to-b9s.txt b/_pages/sr_SP/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/sr_SP/a9lh-to-b9s.txt +++ b/_pages/sr_SP/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/sr_SP/flashing-ntrboot-(3ds-single-system).txt b/_pages/sr_SP/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/sr_SP/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/sr_SP/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/sr_SP/home.txt b/_pages/sr_SP/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/sr_SP/home.txt +++ b/_pages/sr_SP/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/sr_SP/homebrew-launcher-(alternatives).txt b/_pages/sr_SP/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/sr_SP/homebrew-launcher-(alternatives).txt +++ b/_pages/sr_SP/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/sr_SP/homebrew-launcher-(soundhax).txt b/_pages/sr_SP/homebrew-launcher-(soundhax).txt index 29f4bc7f7d..f8e1ee1b1d 100644 --- a/_pages/sr_SP/homebrew-launcher-(soundhax).txt +++ b/_pages/sr_SP/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ The Homebrew Launcher has many different entrypoints, or methods of launching. Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer -1. Copy _the contents of_ `starter.zip` to the root of your SD card +1. Copy `boot.3dsx` (OCS) to the root of your SD card 1. Copy the Soundhax `.m4a` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries + If it freezes, just force the console to power off by holding the power button, then try again - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/sr_SP/updating-b9s.txt b/_pages/sr_SP/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/sr_SP/updating-b9s.txt +++ b/_pages/sr_SP/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/sv_SE/a9lh-to-b9s.txt b/_pages/sv_SE/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/sv_SE/a9lh-to-b9s.txt +++ b/_pages/sv_SE/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt b/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/sv_SE/home.txt b/_pages/sv_SE/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/sv_SE/home.txt +++ b/_pages/sv_SE/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/sv_SE/homebrew-launcher-(alternatives).txt b/_pages/sv_SE/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/sv_SE/homebrew-launcher-(alternatives).txt +++ b/_pages/sv_SE/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/sv_SE/homebrew-launcher-(soundhax).txt b/_pages/sv_SE/homebrew-launcher-(soundhax).txt index 29f4bc7f7d..f8e1ee1b1d 100644 --- a/_pages/sv_SE/homebrew-launcher-(soundhax).txt +++ b/_pages/sv_SE/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ The Homebrew Launcher has many different entrypoints, or methods of launching. Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer -1. Copy _the contents of_ `starter.zip` to the root of your SD card +1. Copy `boot.3dsx` (OCS) to the root of your SD card 1. Copy the Soundhax `.m4a` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries + If it freezes, just force the console to power off by holding the power button, then try again - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/sv_SE/updating-b9s.txt b/_pages/sv_SE/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/sv_SE/updating-b9s.txt +++ b/_pages/sv_SE/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/th_TH/a9lh-to-b9s.txt b/_pages/th_TH/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/th_TH/a9lh-to-b9s.txt +++ b/_pages/th_TH/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt b/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/th_TH/home.txt b/_pages/th_TH/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/th_TH/home.txt +++ b/_pages/th_TH/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/th_TH/homebrew-launcher-(alternatives).txt b/_pages/th_TH/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/th_TH/homebrew-launcher-(alternatives).txt +++ b/_pages/th_TH/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/th_TH/homebrew-launcher-(soundhax).txt b/_pages/th_TH/homebrew-launcher-(soundhax).txt index 29f4bc7f7d..f8e1ee1b1d 100644 --- a/_pages/th_TH/homebrew-launcher-(soundhax).txt +++ b/_pages/th_TH/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ The Homebrew Launcher has many different entrypoints, or methods of launching. Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer -1. Copy _the contents of_ `starter.zip` to the root of your SD card +1. Copy `boot.3dsx` (OCS) to the root of your SD card 1. Copy the Soundhax `.m4a` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries + If it freezes, just force the console to power off by holding the power button, then try again - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/th_TH/updating-b9s.txt b/_pages/th_TH/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/th_TH/updating-b9s.txt +++ b/_pages/th_TH/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/tr_TR/a9lh-to-b9s.txt b/_pages/tr_TR/a9lh-to-b9s.txt index 6ee3caae37..ae2f27088f 100644 --- a/_pages/tr_TR/a9lh-to-b9s.txt +++ b/_pages/tr_TR/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt b/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt index 2765f03bcb..63fb788b1a 100644 --- a/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/tr_TR/home.txt b/_pages/tr_TR/home.txt index 52ca31dbf5..a5640a1fed 100644 --- a/_pages/tr_TR/home.txt +++ b/_pages/tr_TR/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## Homebrew nedir? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) genellikle Nintendo tarafından yetkilendirilmeyen yazılımlara verilen isimdir. Bu sizin homebrew oyunları, düzenleme ve yedekleme gibi araçları ve çeşitli eski sistemler için emülatörleri çalıştırmanızı sağlar. diff --git a/_pages/tr_TR/homebrew-launcher-(alternatives).txt b/_pages/tr_TR/homebrew-launcher-(alternatives).txt index 368c476e7a..a5abd5d27f 100644 --- a/_pages/tr_TR/homebrew-launcher-(alternatives).txt +++ b/_pages/tr_TR/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### Gerekenler * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Talimatlar 1. Cihazınızı kapatın 1. SD kartınızı bilgisayarınıza takın 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device 1. Homebrew launcher'a girmek için aşağıdaki alternatif giriş noktalarından birini kullanın: diff --git a/_pages/tr_TR/homebrew-launcher-(soundhax).txt b/_pages/tr_TR/homebrew-launcher-(soundhax).txt index 5bf93983fc..9bb75ca3da 100644 --- a/_pages/tr_TR/homebrew-launcher-(soundhax).txt +++ b/_pages/tr_TR/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Homebrew Launcher'ın çok sayıda giriş noktası veya başlatma yöntemi vard Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### Gerekenler -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* En son sürümü [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the '.7z' file) * * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Talimatlar 1. Power off your device 1. Insert your SD card into your computer -1. Copy _the contents of_ `starter.zip` to the root of your SD card -1. SoundHax `.m4a` uzantılı dosyasını SD kartınızın kök dizinine kopyalayın -1. Otherapp payload dosyasını SD kartınızın köküne kopyalayın ve adını `otherapp.bin`olarak değiştirin -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - +1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Cihazınızdan Nintendo 3DS Sound uygulamasını çalıştırın @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. `/SDCARD` gidin, "<3 nedwill 2016" dosyasını oynatın + Bir kaç kere denemeniz gerekebilir + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/tr_TR/updating-b9s.txt b/_pages/tr_TR/updating-b9s.txt index 7c23b4e7f2..e83f44d9fd 100644 --- a/_pages/tr_TR/updating-b9s.txt +++ b/_pages/tr_TR/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/uk_UA/a9lh-to-b9s.txt b/_pages/uk_UA/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/uk_UA/a9lh-to-b9s.txt +++ b/_pages/uk_UA/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt b/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/uk_UA/home.txt b/_pages/uk_UA/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/uk_UA/home.txt +++ b/_pages/uk_UA/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/uk_UA/homebrew-launcher-(alternatives).txt b/_pages/uk_UA/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/uk_UA/homebrew-launcher-(alternatives).txt +++ b/_pages/uk_UA/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/uk_UA/homebrew-launcher-(soundhax).txt b/_pages/uk_UA/homebrew-launcher-(soundhax).txt index 29f4bc7f7d..f8e1ee1b1d 100644 --- a/_pages/uk_UA/homebrew-launcher-(soundhax).txt +++ b/_pages/uk_UA/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ The Homebrew Launcher has many different entrypoints, or methods of launching. Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer -1. Copy _the contents of_ `starter.zip` to the root of your SD card +1. Copy `boot.3dsx` (OCS) to the root of your SD card 1. Copy the Soundhax `.m4a` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries + If it freezes, just force the console to power off by holding the power button, then try again - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/uk_UA/updating-b9s.txt b/_pages/uk_UA/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/uk_UA/updating-b9s.txt +++ b/_pages/uk_UA/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/vi_VN/a9lh-to-b9s.txt b/_pages/vi_VN/a9lh-to-b9s.txt index c0e6e7e46d..43964f972c 100644 --- a/_pages/vi_VN/a9lh-to-b9s.txt +++ b/_pages/vi_VN/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt b/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt index 738001be76..f6c0ec4ac4 100644 --- a/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/vi_VN/home.txt b/_pages/vi_VN/home.txt index db07c9ebc7..0e06d26f40 100644 --- a/_pages/vi_VN/home.txt +++ b/_pages/vi_VN/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## What is Homebrew? [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. It allows you to run homebrew games, tools like save editing and backup, and emulators for various older systems. diff --git a/_pages/vi_VN/homebrew-launcher-(alternatives).txt b/_pages/vi_VN/homebrew-launcher-(alternatives).txt index 082e3f3604..53748f0f59 100644 --- a/_pages/vi_VN/homebrew-launcher-(alternatives).txt +++ b/_pages/vi_VN/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### What you need * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/vi_VN/homebrew-launcher-(soundhax).txt b/_pages/vi_VN/homebrew-launcher-(soundhax).txt index 29f4bc7f7d..f8e1ee1b1d 100644 --- a/_pages/vi_VN/homebrew-launcher-(soundhax).txt +++ b/_pages/vi_VN/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ The Homebrew Launcher has many different entrypoints, or methods of launching. Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. {% capture notice-1 %} @@ -19,32 +19,17 @@ This means that using a Cart Update from a version containing an older Nintendo #### What you need -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* * The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### Instructions 1. Power off your device 1. Insert your SD card into your computer -1. Copy _the contents of_ `starter.zip` to the root of your SD card +1. Copy `boot.3dsx` (OCS) to the root of your SD card 1. Copy the Soundhax `.m4a` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` - - ![]({{ base_path }}/images/screenshots/boot9strap-hb-file-layout.png) - {: .notice--info} - 1. Reinsert your SD card into your device 1. Power on your device 1. Launch Nintendo 3DS Sound @@ -57,15 +42,11 @@ This means that using a Cart Update from a version containing an older Nintendo 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries + If it freezes, just force the console to power off by holding the power button, then try again - + If you get a red screen, ensure you copied _the contents of_ the `starter` folder to the root of your SD card ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load the Homebrew Launcher - - ![]({{ base_path }}/images/screenshots/homebrew-launcher.png) - {: .notice--info} +1. Your device should load OCS ___ diff --git a/_pages/vi_VN/updating-b9s.txt b/_pages/vi_VN/updating-b9s.txt index c01a85cae5..1fbb36c602 100644 --- a/_pages/vi_VN/updating-b9s.txt +++ b/_pages/vi_VN/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/zh_CN/a9lh-to-b9s.txt b/_pages/zh_CN/a9lh-to-b9s.txt index d56695aab1..c5f12add82 100644 --- a/_pages/zh_CN/a9lh-to-b9s.txt +++ b/_pages/zh_CN/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section VIII - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Scripts..." diff --git a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt index 111e12d877..11e186c52c 100644 --- a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ Note that more recent 3DS versions have blocked access to some flashcarts, and s + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/zh_CN/home.txt b/_pages/zh_CN/home.txt index f1547632db..5514c627f8 100644 --- a/_pages/zh_CN/home.txt +++ b/_pages/zh_CN/home.txt @@ -11,6 +11,9 @@ header: excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! If you have a developer ("PANDA" or "SNAKE") console, check out [devGuide](https://dev.3ds.guide). @@ -24,9 +27,6 @@ This guide needs *your* help to [translate](https://translate.3ds.guide/) it to This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents! {: .notice--success} -Read all of the introductory pages before proceeding. -{: .notice--warning} - ## 什么是自制程序？ [**Homebrew（自制程序）**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) 通常指未经任天堂授权的软件。 它能让你运行自制游戏，使用像修改和备份存档的工具，以及运行模拟器。 diff --git a/_pages/zh_CN/homebrew-launcher-(alternatives).txt b/_pages/zh_CN/homebrew-launcher-(alternatives).txt index 344abbef03..9386a4d33c 100644 --- a/_pages/zh_CN/homebrew-launcher-(alternatives).txt +++ b/_pages/zh_CN/homebrew-launcher-(alternatives).txt @@ -11,12 +11,14 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### 你需要 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### 指南 1. Power off your device 1. 将你的 SD 卡插入到您的计算机 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: diff --git a/_pages/zh_CN/homebrew-launcher-(soundhax).txt b/_pages/zh_CN/homebrew-launcher-(soundhax).txt index 78feb3995c..1dbdc25c00 100644 --- a/_pages/zh_CN/homebrew-launcher-(soundhax).txt +++ b/_pages/zh_CN/homebrew-launcher-(soundhax).txt @@ -20,12 +20,16 @@ This means that using a Cart Update from a version containing an older Nintendo #### 你需要 * The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### 操作指南 1. Power off your device 1. Insert your SD card into your computer 1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. Reinsert your SD card into your device 1. Power on your device 1. 运行3DS的声音软件 diff --git a/_pages/zh_CN/updating-b9s.txt b/_pages/zh_CN/updating-b9s.txt index 58c4d52548..a64b5d5b19 100644 --- a/_pages/zh_CN/updating-b9s.txt +++ b/_pages/zh_CN/updating-b9s.txt @@ -51,6 +51,9 @@ For all steps in this section, overwrite any existing files on your SD card. ##### Section III - Cleanup SD Card +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. Press (Home) to bring up the action menu diff --git a/_pages/zh_TW/a9lh-to-b9s.txt b/_pages/zh_TW/a9lh-to-b9s.txt index 354944c58f..2d917e61ca 100644 --- a/_pages/zh_TW/a9lh-to-b9s.txt +++ b/_pages/zh_TW/a9lh-to-b9s.txt @@ -147,6 +147,9 @@ title: "升級 A9LH 至 boot9strap" ##### 第八節 — 清理 SD 卡 +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. 按「Home」鍵以叫出主選單 1. 選擇「More...」 1. 選擇「Scripts...」 diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt index 9996402b82..72aec4224e 100644 --- a/_pages/zh_TW/finalizing-setup.txt +++ b/_pages/zh_TW/finalizing-setup.txt @@ -8,7 +8,7 @@ title: "完成安裝" 在本節中，我們將使用 [AuroraWright](https://github.com/AuroraWright/) 的 Luma3DS，直接啟動修改後的 SysNAND 系統，讓我們擺脫 EmuNAND。這除了大量的簡化使用改機後的 3DS 所需的步驟，更還能節省 SD 卡的使用空間。 -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS will need to download some files on your device. +請確保您已開啟主機的無線通信功能並已連線至網際網路。 使用 OCS 時將會自動下載些必要檔案至您的主機中。 在這過程中，我們也將安裝下列程式： @@ -20,7 +20,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### 操作說明 -##### Section I - Updating the System +##### 第一節 — 更新系統 如果您依循了前一版本手冊的步驟，且已將您的 *New 3DS* CTRTransfer 降級至系統版本 2.1.0，您應該在依循本節步驟前先[還原您的 NAND 備份](godmode9-usage#nand_restore)再繼續。 {: .notice--danger} @@ -33,7 +33,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the + 如果過程中出現錯誤，試試到 DNS 設定底下將設定改成「自動 (auto)」 + 如果錯誤持續，請進行 [CTRTransfer](ctrtransfer)，並再試一次 -##### Section II - Launching OCS +##### 第二節 — 啟動 OCS 1. 啟動「下載通信 (Download Play)」程式 1. 同時按下「L」+「下」+「Select」鍵以啟動 Rosalina 選單 @@ -44,21 +44,21 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. 按「B」退出 Rosalina 選單 1. 按「Home」鍵，並關閉「下載通信 (Download Play)」程式 1. 啟動「下載通信 (Download Play)」程式 -1. Your device should load OCS +1. 您的主機應載入 OCS -##### Section III - OCS +##### 第三節 — OCS -1. Press (A) to begin -1. Wait for the downloads and installs to complete -1. Press (Start) to exit when prompted +1. 按「A」鍵開始 +1. 等待下載及安裝程序完成 +1. 提示時，按「Start」鍵退出 1. 按「Home」鍵，並關閉「下載通信 (Download Play)」程式 -##### Section IV - DSP Dump +##### 第四節 — DSP 轉儲 1. 啟動 DSP1 1. 當它處理完畢後，按下「B」將程式刪除並回到主選單 -##### Section V - CTRNAND Luma3DS +##### 第五節 — 安裝 Luma3DS 至 CTRNAND 1. 開機時按住「Start」鍵啟動 GodMode9 1. 當提示重要檔案備份時，按下「A」繼續，並在完畢後按下「A」繼續 @@ -71,7 +71,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. 按「A」 繼續 1. 按下「A」鎖定檔案寫入 -##### Section VI - Backup SysNAND +##### 第六節 — 備份 SysNAND 1. 按「Home」鍵以叫出主選單 1. 選擇「More...」 @@ -88,7 +88,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the 1. 複製完畢後，將 `/gm9/out/` 資料夾中的 `_nandmin_###.bin` 檔案刪除 1. 將 SD 卡插回主機中 -##### Section VII - Cleanup SD Card +##### 第七節 — 清理 SD 卡 1. 按「Home」鍵以叫出主選單 1. 選擇「More...」 diff --git a/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt index 2ee330c755..748368fcac 100644 --- a/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt @@ -14,6 +14,8 @@ title: "寫入 ntrboot 漏洞 (透過單台 3DS 系統)" + R4i Ultra : <= 4.3.0 + Infinity 3 R4i : <= 11.5.0 +Ensure your flashcart is able to launch correctly before starting. Be sure to have any required kernel or firmware files copied to your flashcart's SD card. Consult your specific flashcart's instructions for more information. + 請注意，在某些特殊情況下，某些冒牌的燒錄卡很有可能會在過程中變磚，使得燒錄卡變得無法使用。 這是不大可能的，但不論如何，我們只支援寫在相容清單中的燒錄卡。 為了避免您採購燒錄卡時買到了冒牌卡帶，建議您應於較知名且放心的網站上購買您的燒錄卡(如 [NDS Card](http://www.nds-card.com/))。 {: .notice--danger} diff --git a/_pages/zh_TW/home.txt b/_pages/zh_TW/home.txt index 64057294bb..0b037bad65 100644 --- a/_pages/zh_TW/home.txt +++ b/_pages/zh_TW/home.txt @@ -11,6 +11,9 @@ header: excerpt: "最完整的 3DS 改機教戰手冊，
教您如何從原廠主機改成 boot9strap。
" --- +Thoroughly read all of the introductory pages (including this one!) before proceeding. Note that this page has an FAQ at the bottom that should be read before you get started. +{: .notice--warning} + {% capture notice-home %} 此指南 _僅_ 適用於零售機使用(透過正常管道購買；非任天堂開發者計畫所取得的主機)！ 如果您的機子是開發平台用的主機(代號 PANDA 或 SNAKE)，請見我們的[開發者教學](https://dev.3ds.guide)。 @@ -24,9 +27,6 @@ excerpt: "最完整的 3DS 改機教戰手冊，
教您如何從原廠主 本指南需要*您*的幫助來作種[這些](https://3ds.guide/rss.xml) BT 種子檔案！ {: .notice--success} -請先讀完本手冊的所有序章再進行改機。 -{: .notice--warning} - ## 什麼是自製程式 (Homebrew)？ [**自製程式**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) diff --git a/_pages/zh_TW/homebrew-launcher-(alternatives).txt b/_pages/zh_TW/homebrew-launcher-(alternatives).txt index a83bedb278..597142c635 100644 --- a/_pages/zh_TW/homebrew-launcher-(alternatives).txt +++ b/_pages/zh_TW/homebrew-launcher-(alternatives).txt @@ -6,17 +6,19 @@ Homebrew Launcher 有許多不同的進入點或啟動方法。 如果您無法使用 browserhax(見下表)、或目前沒有任何底下所列的遊戲、或另一台可以使用 Homebrew Launcher 的主機，最便宜的方法大概就是買「任天堂之選」版本的[《薩爾達傳說時之笛 3D》](https://amzn.to/2fkaKdp)(請確保您所購買的卡帶符合您主機的區碼)以及[Powersaves](https://amzn.to/2fb3VY7)(所有區碼皆相容)，然後再使用底下所列的 oot3dhax。 -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. +請確保您已開啟主機的無線通信功能並已連線至網際網路。 使用 OCS 時 (下一頁將使用的工具) 將會自動下載些必要檔案至您的主機中。 #### 必備項目 -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### 操作說明 1. 關閉您的主機 1. 將 SD 卡插入電腦中 -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. 將 `boot.3dsx` (OCS) 複製到 SD 卡根目錄中 +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. 將 SD 卡插回主機中 1. 啟動您的主機 1. 使用下列任意方式進入 Homebrew Launcher： @@ -50,7 +52,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the -1. Your device should load OCS +1. 您的主機應載入 OCS 繼續至 [安裝 boot9strap(透過 Homebrew Launcher)](installing-boot9strap-(homebrew-launcher)) {: .notice--primary} diff --git a/_pages/zh_TW/homebrew-launcher-(soundhax).txt b/_pages/zh_TW/homebrew-launcher-(soundhax).txt index f91d3daf37..f7498a6fe3 100644 --- a/_pages/zh_TW/homebrew-launcher-(soundhax).txt +++ b/_pages/zh_TW/homebrew-launcher-(soundhax).txt @@ -6,7 +6,7 @@ Homebrew Launcher 可以透過不同的進入點或方式開啟。 Soundhax 相容於 9.0.0 至 11.3.0 的歐、日、韓及美區的系統版本。 -Ensure your device's Wireless Communication is turned on and is connected to the internet. OCS (used in the next page) will need to download some files on your device. +請確保您已開啟主機的無線通信功能並已連線至網際網路。 使用 OCS 時 (下一頁將使用的工具) 將會自動下載些必要檔案至您的主機中。 {% capture notice-1 %} @@ -20,13 +20,17 @@ Ensure your device's Wireless Communication is turned on and is connected to the #### 必備項目 -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) +* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your version and region)* #### 操作說明 1. 關閉您的主機 1. 將 SD 卡插入電腦中 -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. 將 `boot.3dsx` (OCS) 複製到 SD 卡根目錄中 +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` 1. 將 SD 卡插回主機中 1. 啟動您的主機 1. 啟動「任天堂 3DS 音樂(Nintendo 3DS Sound)」程式 @@ -43,7 +47,7 @@ Ensure your device's Wireless Communication is turned on and is connected to the ![]({{ base_path }}/images/screenshots/soundhax-launch.png) {: .notice--info} -1. Your device should load OCS +1. 您的主機應載入 OCS ___ diff --git a/_pages/zh_TW/installing-boot9strap-(2xrsa).txt b/_pages/zh_TW/installing-boot9strap-(2xrsa).txt index 292ea11e21..f0262dbba2 100644 --- a/_pages/zh_TW/installing-boot9strap-(2xrsa).txt +++ b/_pages/zh_TW/installing-boot9strap-(2xrsa).txt @@ -7,7 +7,7 @@ title: "安裝 boot9strap (透過 2xrsa)" * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) #### 操作說明 @@ -15,7 +15,7 @@ title: "安裝 boot9strap (透過 2xrsa)" 1. 關閉您的主機 1. 將 SD 卡插入電腦中 -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. 將 `boot.3dsx` (OCS) 複製到 SD 卡根目錄中 1. 解壓 Luma3DS `.7z` 內的 `boot.firm` 到 SD 卡的根目錄底下 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 diff --git a/_pages/zh_TW/installing-boot9strap-(browser).txt b/_pages/zh_TW/installing-boot9strap-(browser).txt index d1802bd897..7157422668 100644 --- a/_pages/zh_TW/installing-boot9strap-(browser).txt +++ b/_pages/zh_TW/installing-boot9strap-(browser).txt @@ -9,7 +9,7 @@ title: "安裝 boot9strap (透過網頁瀏覽器)" * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) #### 操作說明 @@ -17,7 +17,7 @@ title: "安裝 boot9strap (透過網頁瀏覽器)" 1. 關閉您的主機 1. 將 SD 卡插入電腦中 -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. 將 `boot.3dsx` (OCS) 複製到 SD 卡根目錄中 1. 解壓 Luma3DS `.7z` 內的 `boot.firm` 到 SD 卡的根目錄底下 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 diff --git a/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection).txt b/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection).txt index 17139f8856..8acbd66c49 100644 --- a/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection).txt +++ b/_pages/zh_TW/installing-boot9strap-(dsiware-game-injection).txt @@ -27,7 +27,7 @@ title: "安裝 boot9strap (透過 DSiWare 植入遊戲)" * 最新版的 [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) * 對應 **3DS 目標機**的 11.4.0 / 11.5.0 `.firm` 檔案(兩個版本的 FIRM 版本皆相同)(其中「OLD」對應的是舊型 3DS，而「NEW」對應的是 New 3DS)： + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -136,7 +136,7 @@ title: "安裝 boot9strap (透過 DSiWare 植入遊戲)" 1. 解壓 Luma3DS `.7z` 內的 `boot.firm` 到 SD 卡的根目錄底下 1. 將 `boot.nds`(B9STool)複製到 **3DS 目標機** SD 卡的根目錄中 -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. 將 `boot.3dsx`(OCS) 複製到 **3DS 目標機** SD 卡的根目錄中 1. 在 **3DS 目標機** 的 SD 卡根目錄中建立一個新的資料夾 `boot9strap` 1. 依 **3DS 目標機**的型號複製 11.5.0 的 `.firm` 檔案至 **3DS 目標機**的 SD 卡的 `/boot9strap/` 資料夾中 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 diff --git a/_pages/zh_TW/installing-boot9strap-(dsiware-save-injection).txt b/_pages/zh_TW/installing-boot9strap-(dsiware-save-injection).txt index 682511ae73..1f06a2ae1c 100644 --- a/_pages/zh_TW/installing-boot9strap-(dsiware-save-injection).txt +++ b/_pages/zh_TW/installing-boot9strap-(dsiware-save-injection).txt @@ -26,7 +26,7 @@ title: "安裝 boot9strap (透過 DSiWare 植入存檔)" * 最新版的 [b9sTool](https://github.com/Plailect/b9sTool/releases/latest) * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) * 對應 **3DS 目標機**的 11.4.0 / 11.5.0 `.firm` 檔案(兩個版本的 FIRM 版本皆相同)(其中「OLD」對應的是舊型 3DS，而「NEW」對應的是 New 3DS)： + - [`2.54-0_11.4_OLD.firm`](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + - [`2.54-0_11.4_NEW.firm`](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -142,7 +142,7 @@ title: "安裝 boot9strap (透過 DSiWare 植入存檔)" 1. 解壓 Luma3DS `.7z` 內的 `boot.firm` 到 SD 卡的根目錄底下 1. 將 `boot.nds`(B9STool)複製到 **3DS 目標機** SD 卡的根目錄中 -1. Copy `boot.3dsx` (OCS) to the root of **the target 3DS**'s SD card +1. 將 `boot.3dsx`(OCS) 複製到 **3DS 目標機** SD 卡的根目錄中 1. 建立一個新的資料夾 `boot9strap` 於 **3DS 目標機** 的 SD 卡根目錄中 1. 依 **3DS 目標機**的型號複製 11.5.0 的 `.firm` 檔案至 **3DS 目標機**的 SD 卡的 `/boot9strap/` 資料夾中 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 diff --git a/_pages/zh_TW/installing-boot9strap-(hardmod).txt b/_pages/zh_TW/installing-boot9strap-(hardmod).txt index 98ad10a5d2..51112712a7 100644 --- a/_pages/zh_TW/installing-boot9strap-(hardmod).txt +++ b/_pages/zh_TW/installing-boot9strap-(hardmod).txt @@ -17,7 +17,7 @@ title: "安裝 boot9strap (透過硬改)" * 最新版的 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows 使用者可使用已編譯的 `.exe` 檔，而 Mac 及 Linux 使用者得先安裝 [Python 3](https://www.python.org/downloads/) 才能執行 `.py` 檔 * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) * 對應您主機型號及版本的 `.firm` 檔案： | 系統版本 | 內核版本 | 舊型 3DS 或 舊型 2DS | New 3DS 或 New 2DS | @@ -54,7 +54,7 @@ title: "安裝 boot9strap (透過硬改)" ##### 第一節 — 準備工作 -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. 將 `boot.3dsx` (OCS) 複製到 SD 卡根目錄中 1. 解壓 Luma3DS `.7z` 內的 `boot.firm` 到 SD 卡的根目錄底下 1. 解壓 hardmod-b9s-installer `.zip` 中的 hardmod-b9s-installer 資料夾至電腦中 1. 複製您所下載的 `.firm` 檔案至電腦的 hardmod-b9s-installer 資料夾中 diff --git a/_pages/zh_TW/installing-boot9strap-(homebrew-launcher).txt b/_pages/zh_TW/installing-boot9strap-(homebrew-launcher).txt index 1feae39ca9..0793ac1384 100644 --- a/_pages/zh_TW/installing-boot9strap-(homebrew-launcher).txt +++ b/_pages/zh_TW/installing-boot9strap-(homebrew-launcher).txt @@ -6,14 +6,14 @@ title: "安裝 boot9strap (透過 Homebrew Launcher)" #### 操作說明 -##### Section I - OCS +##### 第一節 — OCS -1. Press (A) to begin -1. Wait for the downloads to complete -1. Wait for the exploit to run +1. 按「A」鍵開始 +1. 等待下載程序完成 +1. 等待漏洞執行完畢 + 可能需要嘗試多次 - + If it freezes, just force the console to power off by holding the power button, then relaunch OCS to try again - + If you get a "PM INIT FAILED" error, try replacing the `safehax.3dsx` file in the `/3ds/` folder on your SD card with the one from the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19) + + 如果當機的話，透過電源按鈕將您的主機強制關機，並重新啟動 OCS 再試一次 + + 若您遇到「PM INIT FAILED」之錯誤訊息，請試著替換 SD 卡 `/3ds/` 資料夾中的 `safehax.3dsx` 檔案替換為 [r19 版本的 safehax 檔案](https://github.com/TiniVi/safehax/releases/tag/r19) 1. 如果一切成功的話，您將自動進入 SafeB9SInstaller ##### 第二節 — 安裝 boot9strap diff --git a/_pages/zh_TW/installing-boot9strap-(mset).txt b/_pages/zh_TW/installing-boot9strap-(mset).txt index 590a345d10..621df55cd5 100644 --- a/_pages/zh_TW/installing-boot9strap-(mset).txt +++ b/_pages/zh_TW/installing-boot9strap-(mset).txt @@ -9,7 +9,7 @@ title: "安裝 boot9strap (透過 MSET)" * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) * 任意可在您主機上運行的 DS 燒錄卡 #### 操作說明 @@ -18,7 +18,7 @@ title: "安裝 boot9strap (透過 MSET)" 1. 關閉您的主機 1. 將 SD 卡插入電腦中 -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. 將 `boot.3dsx` (OCS) 複製到 SD 卡根目錄中 1. 解壓 Luma3DS `.7z` 內的 `boot.firm` 到 SD 卡的根目錄底下 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt index 0af97b782e..6103f1a908 100644 --- a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt @@ -9,7 +9,7 @@ title: "安裝 boot9strap (透過 ntrboot)" * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)* -* The latest release of [OCS](https://github.com/Pirater12/ocs/releases/latest) +* 最新版的 [OCS](https://github.com/Pirater12/ocs/releases/latest) #### 操作說明 @@ -17,7 +17,7 @@ title: "安裝 boot9strap (透過 ntrboot)" 1. 關閉您的主機 1. 將 SD 卡插入電腦中 -1. Copy `boot.3dsx` (OCS) to the root of your SD card +1. 將 `boot.3dsx` (OCS) 複製到 SD 卡根目錄中 1. 將 `SafeB9SInstaller.firm` 複製於 SD 卡中的根目錄，並將其命名為 `boot.firm` 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 diff --git a/_pages/zh_TW/updating-b9s.txt b/_pages/zh_TW/updating-b9s.txt index c685ff76e5..055f604056 100644 --- a/_pages/zh_TW/updating-b9s.txt +++ b/_pages/zh_TW/updating-b9s.txt @@ -51,6 +51,9 @@ title: "更新 B9S" # ##### 第三節 — 清理 SD 卡 +Note that this script will remove the `/boot9strap/` and `/cias/` folders from your SD card! +{: .notice--danger} + 1. 開機時按住「Start」鍵啟動 GodMode9 1. 當提示重要檔案備份時，按下「A」繼續，並在完畢後按下「A」繼續 1. 按「Home」鍵以叫出主選單