diff --git a/_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt b/_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/af_ZA/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/af_ZA/get-started-(old-3ds).txt b/_pages/af_ZA/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/af_ZA/get-started-(old-3ds).txt +++ b/_pages/af_ZA/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/af_ZA/homebrew-launcher-(soundhax).txt b/_pages/af_ZA/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/af_ZA/homebrew-launcher-(soundhax).txt +++ b/_pages/af_ZA/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/af_ZA/installing-boot9strap-(ntrboot).txt b/_pages/af_ZA/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/af_ZA/installing-boot9strap-(ntrboot).txt +++ b/_pages/af_ZA/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/af_ZA/installing-boot9strap-(soundhax).txt b/_pages/af_ZA/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/af_ZA/installing-boot9strap-(soundhax).txt +++ b/_pages/af_ZA/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt b/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ar_SA/get-started-(old-3ds).txt b/_pages/ar_SA/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/ar_SA/get-started-(old-3ds).txt +++ b/_pages/ar_SA/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/ar_SA/homebrew-launcher-(soundhax).txt b/_pages/ar_SA/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/ar_SA/homebrew-launcher-(soundhax).txt +++ b/_pages/ar_SA/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt +++ b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/ar_SA/installing-boot9strap-(soundhax).txt b/_pages/ar_SA/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/ar_SA/installing-boot9strap-(soundhax).txt +++ b/_pages/ar_SA/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt b/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ca_ES/get-started-(old-3ds).txt b/_pages/ca_ES/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/ca_ES/get-started-(old-3ds).txt +++ b/_pages/ca_ES/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/ca_ES/homebrew-launcher-(soundhax).txt b/_pages/ca_ES/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/ca_ES/homebrew-launcher-(soundhax).txt +++ b/_pages/ca_ES/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/ca_ES/installing-boot9strap-(soundhax).txt b/_pages/ca_ES/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/ca_ES/installing-boot9strap-(soundhax).txt +++ b/_pages/ca_ES/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt b/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/cs_CZ/get-started-(old-3ds).txt b/_pages/cs_CZ/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/cs_CZ/get-started-(old-3ds).txt +++ b/_pages/cs_CZ/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt +++ b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt +++ b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt +++ b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt b/_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/da_DK/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/da_DK/get-started-(old-3ds).txt b/_pages/da_DK/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/da_DK/get-started-(old-3ds).txt +++ b/_pages/da_DK/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/da_DK/homebrew-launcher-(soundhax).txt b/_pages/da_DK/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/da_DK/homebrew-launcher-(soundhax).txt +++ b/_pages/da_DK/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/da_DK/installing-boot9strap-(ntrboot).txt b/_pages/da_DK/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/da_DK/installing-boot9strap-(ntrboot).txt +++ b/_pages/da_DK/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/da_DK/installing-boot9strap-(soundhax).txt b/_pages/da_DK/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/da_DK/installing-boot9strap-(soundhax).txt +++ b/_pages/da_DK/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt b/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt index c3d8dcabe9..52c16c058e 100644 --- a/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -Diese Methode erfordert nichts weiter außer deinem ungehacktem 3DS und einer kompatiblen Flashkarte. Diese Methode verwendet eine Flashkarte zum Ausführen der Ntrboot Flasher ".nds" Datei auf deinem 3DS. Dies bedeutet, dass deine Flashkarte das Ausführen von ".nds" Dateien auf deiner 3DS Version unterstützen muss. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +Diese Methode erfordert nichts weiter außer deinem ungehacktem 3DS und einer kompatiblen Flashkarte. Diese Methode verwendet eine Flashkarte zum Ausführen der Ntrboot Flasher ".nds" Datei auf deinem 3DS. Dies bedeutet, dass deine Flashkarte das Ausführen von ".nds" Dateien auf deiner 3DS Version unterstützen muss. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/de_DE/get-started-(old-3ds).txt b/_pages/de_DE/get-started-(old-3ds).txt index baf5f460fc..897d4d6f16 100644 --- a/_pages/de_DE/get-started-(old-3ds).txt +++ b/_pages/de_DE/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den 4.0.0 - 4.5.0 - Installation von boot9strap (MSET) - Installation von boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/de_DE/homebrew-launcher-(soundhax).txt b/_pages/de_DE/homebrew-launcher-(soundhax).txt index 970e0a9025..8c8adf0caf 100644 --- a/_pages/de_DE/homebrew-launcher-(soundhax).txt +++ b/_pages/de_DE/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Der Homebrew Launcher hat viele verschiedene Eintrittspunkte, beziehungsweise Möglichkeiten, um ihn zu starten. -Soundhax ist kompatibel mit den Versionen 9.0.0 bis einschließlich 11.3.0 in den Regionen EUR, JPN, KOR, and USA. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Stelle sicher, dass die Drahtloskommunikation deiner Konsole eingeschaltet ist, da udsploit (wird auf der nächsten Seite genutzt) ein aktives Drahtlosmodul erfordert und manche Konsolen (New 3DS, New 2DS und Old 2DS) die Drahtloskommunikation im Homebrew Launcher nicht einschalten können. Drahtloskommunikation muss nur eingeschaltet sein. Eine Verbindung zu einem Access Point ist nicht notwendig. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* Die neueste Version von [Soundhax](http://soundhax.com/) *(für deine Konsole und deine Region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * Die neuste Version von [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * Die neuste Version von [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; nicht die `devkit` Datei, nicht die`ntr` Datei)* * Die neuste Version von [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(die `.3dsx` Datei)* * Die neuste Version von [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(die `.7z`-Datei)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Anleitung diff --git a/_pages/de_DE/installing-boot9strap-(ntrboot).txt b/_pages/de_DE/installing-boot9strap-(ntrboot).txt index 65e20527fe..d8d0e41d5e 100644 --- a/_pages/de_DE/installing-boot9strap-(ntrboot).txt +++ b/_pages/de_DE/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Folge diesen Schritten erst, wenn du den Rest der Anweisungen auf dieser Seite a 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Stecke deine SD-Karte nun wieder in deinen 3DS diff --git a/_pages/de_DE/installing-boot9strap-(soundhax).txt b/_pages/de_DE/installing-boot9strap-(soundhax).txt index bffb7ec11e..42b254d8d9 100644 --- a/_pages/de_DE/installing-boot9strap-(soundhax).txt +++ b/_pages/de_DE/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" Falls du bereits deinen 3DS zuvor gehackt hast und eine EmuNAND basierte CFW installiert ist: Diese Anleitung behandelt nur das SysNAND und alle Schritte sollten nur innerhalb des SysNANDs ausgeführt/angewendet werden. Beachte, dass die Begriffe EmuNAND und RedNAND sich auf leicht unterschiedliche Implementierungen [des selben Konzepts](http://3dbrew.org/wiki/NAND_Redirection) beziehen. -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* Die neueste Version von [Soundhax](http://soundhax.com/) *(für deine Konsole und deine Region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * Die neuste Version von [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * Die neuste Version von [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; nicht die `devkit` Datei, nicht die`ntr` Datei)* * Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(die `.7z`-Datei)* diff --git a/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt b/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt index a1c16f0e35..bfcced3bcf 100644 --- a/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/el_GR/get-started-(old-3ds).txt b/_pages/el_GR/get-started-(old-3ds).txt index 385fead31f..60bdd8e810 100644 --- a/_pages/el_GR/get-started-(old-3ds).txt +++ b/_pages/el_GR/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/el_GR/homebrew-launcher-(soundhax).txt b/_pages/el_GR/homebrew-launcher-(soundhax).txt index 78eee0ed32..f054f63e13 100644 --- a/_pages/el_GR/homebrew-launcher-(soundhax).txt +++ b/_pages/el_GR/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" To Ηomebrew Launcher έχει πολλές διαφορετικές μεθόδους εισόδου. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/el_GR/installing-boot9strap-(ntrboot).txt b/_pages/el_GR/installing-boot9strap-(ntrboot).txt index 749904a386..eea34c2d0c 100644 --- a/_pages/el_GR/installing-boot9strap-(ntrboot).txt +++ b/_pages/el_GR/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Εισάγετε την κάρτα SD στον υπολογιστή σας + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/el_GR/installing-boot9strap-(soundhax).txt b/_pages/el_GR/installing-boot9strap-(soundhax).txt index bf397caf2b..ef47581f08 100644 --- a/_pages/el_GR/installing-boot9strap-(soundhax).txt +++ b/_pages/el_GR/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt b/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt index 4e694c80b0..fc140e77fe 100644 --- a/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/en_PT/get-started-(old-3ds).txt b/_pages/en_PT/get-started-(old-3ds).txt index 3913d87dc6..067ca57577 100644 --- a/_pages/en_PT/get-started-(old-3ds).txt +++ b/_pages/en_PT/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Ye device version can be found at th' bottom right 'o th' top screen 'o th' Syst 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/en_PT/homebrew-launcher-(soundhax).txt b/_pages/en_PT/homebrew-launcher-(soundhax).txt index a5da1774d9..0c7d9a5cc5 100644 --- a/_pages/en_PT/homebrew-launcher-(soundhax).txt +++ b/_pages/en_PT/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Th' Homebrew Launcher has many different entrypoints, or methods 'o launchin'. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connectin' it to an access point be not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/en_PT/installing-boot9strap-(ntrboot).txt b/_pages/en_PT/installing-boot9strap-(ntrboot).txt index 0a4db7f0d2..687f54cf68 100644 --- a/_pages/en_PT/installing-boot9strap-(ntrboot).txt +++ b/_pages/en_PT/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert ye SD card into ye computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert ye SD card into ye device diff --git a/_pages/en_PT/installing-boot9strap-(soundhax).txt b/_pages/en_PT/installing-boot9strap-(soundhax).txt index b62f42ff1f..2b61181cf1 100644 --- a/_pages/en_PT/installing-boot9strap-(soundhax).txt +++ b/_pages/en_PT/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that th' terms EmuNAND 'n RedNAND be referrin' to slightly different implementations 'o [th' same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt b/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt index 956cd3e771..c83637977b 100644 --- a/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashear ntrboot (Una consola 3DS)" Antes de continuar, asegúrate de haber leído toda la información en [ntrboot](ntrboot) -Este método tan sólo requiere de tu consola 3DS sin modificar y un flashcart compatible. Este método utiliza la flashcart para ejecutar el archivo `.nds` del flasher de ntrboot en tu 3DS. Esto significa que tu flashcart debe ser capaz de ejecutar archivos `.nds` en la versión de tu 3DS. Revisa la tabla de flashcarts para más información. Consulta la tabla de flashcarts en [ntrboot](ntrboot) para más información. +Este método tan sólo requiere de tu consola 3DS sin modificar y un flashcart compatible. Este método utiliza la flashcart para ejecutar el archivo `.nds` del flasher de ntrboot en tu 3DS. Esto significa que tu flashcart debe ser capaz de ejecutar archivos `.nds` en la versión de tu 3DS. Consulta la tabla de flashcarts en [ntrboot](ntrboot) para más información. Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flasheo en un clon de flashcart podría dejarla **permanentemente inutilizable**. Esto es poco probable, pero sin embargo, sólo las flashcarts originales mencionadas tienen soporte. Para reducir la posibilidad de recibir un clon, se recomienda que utilizar un sitio de confianza para comprar una flashcart (como [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/es_ES/get-started-(old-3ds).txt b/_pages/es_ES/get-started-(old-3ds).txt index affa69947c..1184e591bf 100644 --- a/_pages/es_ES/get-started-(old-3ds).txt +++ b/_pages/es_ES/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ La versión de tu consola puede verse en la esquina inferior derecha de la panta 4.0.0 - 4.5.0 - Instalar boot9strap (MSET) - Instalar boot9strap (Navegador) - - - 5.0.0 8.1.0 Instalar boot9strap (Soundhax) diff --git a/_pages/es_ES/homebrew-launcher-(soundhax).txt b/_pages/es_ES/homebrew-launcher-(soundhax).txt index 5461f6618f..5be0df1bc8 100644 --- a/_pages/es_ES/homebrew-launcher-(soundhax).txt +++ b/_pages/es_ES/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" El Homebrew Launcher tiene diferentes puntos de entrada, o métodos para ejecutarse. -Soundhax es compatible con las versiones 9.0.0 hasta la 11.3.0 en las regiones EUR, JPN, KOR y USA. +Soundhax (en combinación con el Homebrew Launcher) es compatible con versiones desde 9.0.0 hasta 11.3.0 de las regiones EUR, JPN, KOR y USA. Asegúrate de que la Comunicación inalámbrica de tu dispositivo está encendida, ya que udsploit (usado en la siguiente página) necesitará que el módulo inalámbrico esté activado para funcionar. Algunos dispositivos (New 3DS, New 2DS y Old 2DS) no pueden ajustar la Comunicación inalámbrica desde el Hombrew Launcher. La Comunicación inalámbrica sólo tiene que estar encendida; conectarse a un punto de acceso no es necesario. @@ -18,7 +18,7 @@ Para extraer los archivos `.7z` enlazados esta página, necesitarás un gestor d Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los elementos claves de la versión, como la Configuración de la consola, el menú HOME, etc. las actualizaciones por cartucho no afectarán a Nintendo 3DS Sound ni a funcionalidades en línea, como la Transferencia de Sistema, el Navegador de internet, la Plaza Mii o la eShop. -¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<3.0.0)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que Soundhax deje de funcionar! You will need an [alternate method](homebrew-launcher-(alternatives)) of installing boot9strap! +¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<3.0.0)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que Soundhax deje de funcionar! ¡Necesitarás un [método alternativo](homebrew-launcher-(alternatives)) de instalación de boot9strap! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -26,13 +26,13 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme ### Qué necesitas * La última versión de [The Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* La última versión de [Soundhax](http://soundhax.com/) *(correspondiente a tu consola y región)* +* La última versión de [Soundhax](http://soundhax.com/) *(correspondiente a tu consola, región y versión)* * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"}{:target="_blank"} *(el archivo `.3dsx`)* * La última versión de [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(el archivo`.7z`)* -* El [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(correspondiente a tu versión del sistema y región)* +* El [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(correspondiente a tu región y versión del sistema)* ### Instrucciones diff --git a/_pages/es_ES/installing-boot9strap-(ntrboot).txt b/_pages/es_ES/installing-boot9strap-(ntrboot).txt index 82a62e477f..dbae4e1df1 100644 --- a/_pages/es_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/es_ES/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ No sigas esta sección mientras no hayas completado el resto de instrucciones de 1. Inserta tu tarjeta SD en tu computadora + Ésta es la tarjeta SD de tu 3DS, *no* la tarjeta SD de tu flashcart 1. Crea una carpeta llamada`ntrboot` en la raíz de tu tarjeta SD -1. Copia el archivo `backup.bin` desde el archivo `.zip` de respaldo de flashrom a la carpeta `/ntrboot/` en la raíz de tu tarjeta SD +1. Copia el archivo `.bin` desde el archivo `.zip` de respaldo de flashrom a la carpeta `/ntrboot/` en la raíz de tu tarjeta SD 1. Crea una carpeta llamada `payloads` en la carpeta `luma` de tu tarjeta SD 1. Copia `ntrboot_flasher.firm` a la carpeta `/luma/payloads` de tu tarjeta SD 1. Vuelve a insertar tu tarjeta SD en tu consola diff --git a/_pages/es_ES/installing-boot9strap-(soundhax).txt b/_pages/es_ES/installing-boot9strap-(soundhax).txt index 7a6f722585..8b681e2c46 100644 --- a/_pages/es_ES/installing-boot9strap-(soundhax).txt +++ b/_pages/es_ES/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Instalar boot9strap (Soundhax)" Si ya habías hackeado tu consola y tienes un CFW basado en EmuNAND, esta guía es sólo para la SysNAND, por lo que todas las instrucciones deben ser aplicadas en la SysNAND. Nota: los términos EmuNAND y RedNAND son diferentes implementaciones del [mismo concepto](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (en combinación con pre9otherapp) es compatible con las versiones desde la 5.0.0 hasta la 8.1.0 de las regiones EUR, JPN, KOR y USA. +Soundhax (en combinación con pre9otherapp) es compatible con las versiones desde la 4.0.0 hasta la 8.1.0 de las regiones EUR, JPN, KOR y USA. Para extraer los archivos `.7z` enlazados esta página, necesitarás un gestor de archivos como [7-Zip](http://www.7-zip.org/) o [The Unarchiver](https://theunarchiver.com/). @@ -16,14 +16,14 @@ Para extraer los archivos `.7z` enlazados esta página, necesitarás un gestor d Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los elementos claves de la versión, como la Configuración de la consola, el menú HOME, etc. las actualizaciones por cartucho no afectarán a Nintendo 3DS Sound ni a funcionalidades en línea, como la Transferencia de Sistema, el Navegador de internet, la Plaza Mii o la eShop. -¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<3.0.0)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que [Soundhax](homebrew-launcher-(soundhax)) deje de funcionar! You will need an [alternate method](installing-boot9strap-(mset)) of entering the Homebrew Launcher! +¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<3.0.0)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que [Soundhax](homebrew-launcher-(soundhax)) deje de funcionar! ¡Necesitarás un [método alternativo](installing-boot9strap-(mset)) para ingresar al Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
### Qué necesitas -* La última versión de [Soundhax](http://soundhax.com/) *(correspondiente a tu consola y región)* +* La última versión de [Soundhax](http://soundhax.com/) *(correspondiente a tu consola, región y versión)* * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(el archivo`.7z`)* diff --git a/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt b/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt index 8399c22b99..6002d24951 100644 --- a/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Ntrbootin asentaminen (yksi 3DS)" Varmista ennen jatkamista, että olet lukenut kaikki [ntrbootia koskevat huomautukset](ntrboot). -Tämä menetelmä vaatii vain hakkeroimattoman, vakiolaiteohjelmistolla olevan 3DS-konsolisi sekä yhteensopivan flash-kortin. Tämä menetelmä käyttää flash-korttia ntrbootin asentamiseen `.nds`-tiedoston kautta 3DS:lläsi. Flash-korttisi täytyy siis tukea `.nds`-tiedostojen lataamista 3DS:si versiolla. Tutustu flash-korttitaulukkoon lisätietoja varten. Tutustu [Ntrboot](ntrboot)-sivun flash-korttitaulukkoon lisätietoja varten. +Tämä menetelmä vaatii vain hakkeroimattoman, vakiolaiteohjelmistolla olevan 3DS-konsolisi sekä yhteensopivan flash-kortin. Tämä menetelmä käyttää flash-korttia ntrbootin asentamiseen `.nds`-tiedoston kautta 3DS:lläsi. Flash-korttisi täytyy siis tukea `.nds`-tiedostojen lataamista 3DS:si versiolla. Tutustu [Ntrboot](ntrboot)-sivun flash-korttitaulukkoon lisätietoja varten. Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **vioittaa** jäljitelmä-flash-korttia ja tehdä siitä pysyvästi käyttökelvottoman. Vaikka tämä onkin epätodennäköistä, on suositeltavaa käyttää vain alkuperäisiä kortteja. Jotta välttyisit jäljitelmäkortin saamiselta, on suositeltavaa käyttää flash-kortin ostamiseen hyvämaineista sivustoa (kuten [NDS Card](http://www.nds-card.com/)ia). {: .notice--danger} diff --git a/_pages/fi_FI/get-started-(old-3ds).txt b/_pages/fi_FI/get-started-(old-3ds).txt index b9a8c5d23a..718a72011f 100644 --- a/_pages/fi_FI/get-started-(old-3ds).txt +++ b/_pages/fi_FI/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Järjestelmäsi versio löytyy yläruudun oikeasta alakulmasta järjestelmäaset 4.0.0 - 4.5.0 - Boot9strapin asentaminen (MSET) - Boot9strapin asentaminen (selain) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/fi_FI/homebrew-launcher-(soundhax).txt b/_pages/fi_FI/homebrew-launcher-(soundhax).txt index 471123d215..fde9453c11 100644 --- a/_pages/fi_FI/homebrew-launcher-(soundhax).txt +++ b/_pages/fi_FI/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcherille on useita eri sisäänpääsy- eli käynnistystapoja. -SoundHax on yhteensopiva versiosta 9.0.0 versioon 11.3.0 EUR-, JPN-, KOR- ja USA-konsoleiden kanssa. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Varmista, että langaton yhteys on päällä, sillä udsploit (käytetään seuraavassa osiossa) tarvitsee sitä toimiakseen, eikä joillakin konsoleilla (New 3DS, New 2DS ja vanha 2DS) voi muuttaa langattoman yhteyden asetusta Homebrew Launcherissa. Langattoman yhteyden tarvitsee vain olla päällä; tukiasemaan yhdistämistä ei vaadita. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### Tarpeet * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* SoundHaxin [viimeisin julkaisu](http://soundhax.com/) *(konsolisi mallin ja alueen mukainen)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * SafeB9SInstallerin [viimeisin julkaisu](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * Boot9strapin [viimeisin julkaisu](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(tavallinen boot9strap-tiedosto; ei `devkit`- eikä `ntr`-tiedosto)* * Safehaxin [viimeisin julkaisu](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(`.3dsx`-tiedosto)* * Udsploitin [viimeisin julkaisu](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(`.7z`-tiedosto)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Ohjeet diff --git a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt index 95314df309..cea56e82d3 100644 --- a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt +++ b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Huomaa, että Acekard 2i -flash-kortti pystyy edelleen avaamaan `.nds`-tiedostoj 1. Aseta SD-korttisi tietokoneeseesi + Tämä tarkoittaa siis 3DS:si SD-korttia, *ei* flash-korttisi SD-korttia 1. Luo `ntrboot`-niminen kansio SD-korttisi juureen -1. Kopioi flash-muisti-`.zip`-pakkauksesta `backup.bin` SD-korttisi `/ntrboot/`-kansioon +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Luo `payloads`-niminen kansio SD-korttisi `luma`-kansioon 1. Kopioi `ntrboot_flasher.firm` SD-korttisi `/luma/payloads/`-kansioon 1. Aseta SD-korttisi takaisin konsoliisi diff --git a/_pages/fi_FI/installing-boot9strap-(soundhax).txt b/_pages/fi_FI/installing-boot9strap-(soundhax).txt index fc30de71e2..cc86d2a18d 100644 --- a/_pages/fi_FI/installing-boot9strap-(soundhax).txt +++ b/_pages/fi_FI/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" Jos olet jo hakkeroinut konsolisi aikaisemmin, ja sinulla on EmuNAND-pohjainen CFW-kokoonpano, ota huomioon, että nämä ohjeet koskevat ainoastaan SysNANDia, joten sinun tulisi seurata ohjeita sen mukaisesti. Huomaa, että termit EmuNAND ja RedNAND viittaavat [saman konseptin](http://3dbrew.org/wiki/NAND_Redirection) kahteen hiukan erilaiseen toteutukseen. -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. Purkaaksesi tämän osion `.7z`-tiedostot tarvitset pakkausohjelman, kuten [7-Zip](http://www.7-zip.org/)in tai [The Unarchiver](https://theunarchiver.com/)in. @@ -23,7 +23,7 @@ Tämä tarkoittaa sitä, että [SoundHax](homebrew-launcher-(soundhax))in toimin ### Tarpeet -* SoundHaxin [viimeisin julkaisu](http://soundhax.com/) *(konsolisi mallin ja alueen mukainen)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * SafeB9SInstallerin [viimeisin julkaisu](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * Boot9strapin [viimeisin julkaisu](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(tavallinen boot9strap-tiedosto; ei `devkit`- eikä `ntr`-tiedosto)* * Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(`.7z`-tiedosto)* diff --git a/_pages/fr_FR/a9lh-to-b9s.txt b/_pages/fr_FR/a9lh-to-b9s.txt index 210c1496e0..bac16a0bda 100644 --- a/_pages/fr_FR/a9lh-to-b9s.txt +++ b/_pages/fr_FR/a9lh-to-b9s.txt @@ -2,7 +2,7 @@ title: "Mise à jour vers boot9strap" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise @@ -100,11 +100,11 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants #### Section IV - Mise à jour du système -Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vous souhaitez transférer le contenu de votre précédent EmuNAND sur votre nouvelle SysNAND CFW, il est temps de [Suivre Transférer EmuNAND](move-emunand) avant de suivre cette section. +Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vous souhaitez transférer le contenu de votre précédent EmuNAND sur votre nouvelle SysNAND CFW, il est temps de [Transférer votre EmuNAND](move-emunand) avant de suivre cette section. {: .notice--info} 1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour du Système" - + Mettre à jour tout en utilisant B9S + Luma (ce que vous avez) sont sans danger + + Mettre à jour tout en ayant B9S + Luma (ce que vous avez) est sans danger + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique" + Si cela vous donne encore une erreur, [suivez CTRTransfer](ctrtransfer), puis essayez de mettre à jour à nouveau diff --git a/_pages/fr_FR/cart-update.txt b/_pages/fr_FR/cart-update.txt index f5f5e7e863..c597488c94 100644 --- a/_pages/fr_FR/cart-update.txt +++ b/_pages/fr_FR/cart-update.txt @@ -2,7 +2,7 @@ title: "Mise à jour par Cartouche" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise @@ -12,14 +12,14 @@ Toutes les cartouches de jeu contiennent une copie du firmware nécessaire pour Les mises à jour par cartouche vont mettre uniquement à jour les fonctionnalités principales telles que les Paramètres Systèmes, le Menu Home, etc. les mises à jour par cartouche ne vont pas mettre à jour le Studio Son Nintendo 3DS et les fonctionnalités Internet comme le Transfert Système, le Navigateur Internet, la Place Mii Streetpass ou le Nintendo eShop. -Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une version contenant une ancienne version du Studio Son 3DS *(< 3.0.0)* à une autre qui a introduit une version plus récente du Studio Son 3DS cassera [Soundhax](homebrew-launcher-(soundhax)) ! Vous aurez besoin d'une [méthode alternative](homebrew-launcher-(alternatives)) pour entrer dans l'Homebrew Launcher! +Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une version contenant une ancienne version du Studio Son 3DS *(< 3.0.0)* à une autre qui a introduit une version plus récente du Studio Son 3DS cassera [Soundhax](homebrew-launcher-(soundhax)) ! Vous aurez besoin d'une [méthode alternative](homebrew-launcher-(alternatives)) pour entrer dans l'Homebrew Launcher ! Cela signifie également qu'une mise à jour par cartouche N'INSTALLERA PAS de navigateur internet sur votre console si elle n'en a pas déjà un. **Seule** la partie principale du numéro de version du firmware sera mise à jour *(de 2.1.0-0 vers 6.0.0-0 par exemple)*. Le dernier nombre *(le -0)* ne changera **pas**. {% endcapture %}
{{ notice-1 | markdownify }}
-**Mettre à jour avec un cartouche de jeu qui contient une version supérieure à 9.9.0 va enlever votre navigateur internet jusqu'à qu'une mise à jour en ligne soit effectuée !** +**Mettre à jour avec une cartouche de jeu qui contient une version supérieure à 9.9.0 va enlever votre navigateur internet jusqu'à qu'une mise à jour en ligne soit effectuée !** {: .notice--danger} ## Ce dont vous avez besoin diff --git a/_pages/fr_FR/ctrtransfer.txt b/_pages/fr_FR/ctrtransfer.txt index 11db71cb12..82e44f0943 100644 --- a/_pages/fr_FR/ctrtransfer.txt +++ b/_pages/fr_FR/ctrtransfer.txt @@ -2,7 +2,7 @@ title : "CTRTransfer" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise @@ -10,7 +10,7 @@ Ceci est une section complémentaire pour ceux qui voudraient installer une imag Pour utiliser les liens suivants [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download). -Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . +Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyer sur (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. {: .notice--danger} @@ -20,8 +20,8 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. * La dernière version de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest){:target="_blank"} * La dernière version de [FBI](https://github.com/Steveice10/FBI/releases/latest){:target="_blank"} *(le fichier`.3dsx`)* * [ctrtransfer_ticket_copy.gm9]({{ "/gm9_scripts/ctrtransfer_ticket_copy.gm9" | absolute_url }}){:download} -* L'image Ctrtransfer 11.5.0 pour votre console et votre région -*(Si votre console n'est pas issue d'une de ces régions, choisissez-en simplement une qui correspond à votre type de console)*: +* L'image CTRtransfer 11.5.0 pour votre console et votre région +*(si votre console n'est pas issue d'une de ces régions, choisissez-en simplement une qui correspond à votre type de console)* : + - [New 3DS ou 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce) + - [New 3DS ou 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce) + - [New 3DS ou 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce) @@ -39,8 +39,8 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Insérez votre carte SD dans votre ordinateur 1. Créez un dossier nommé `3ds` à la racine de votre carte SD si celui ci n'existe pas 1. Créez un dossier nommé `cias` à la racine de votre carte SD si celui ci n'existe pas -1. Copiez le fichier `GodMode9.firm` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD -1. Copiez le dossier `gm9` de GodMode9 `.zip` à la racine de votre carte SD +1. Copiez le fichier `GodMode9.firm` de l'archive `.zip` de GodMode9 dans le dossier `/luma/payloads/` sur votre carte SD +1. Copiez le dossier `gm9` du `.zip` de GodMode9 à la racine de votre carte SD 1. Copiez `ctrtransfer_ticket_copy.gm9` dans le dossier `/gm9/scripts/` sur votre carte SD 1. Copiez les fichiers `.bin` et `.bin.sha` de l'image CTRtransfer 11.5.0 depuis le `.zip` de CTRtransfer vers le dossier `/gm9/` de votre carte SD 1. Copiez `FBI.3dsx` dans le dossier `/3ds/` de votre carte SD @@ -49,11 +49,11 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. #### Section II - CTRTransfer 1. Ouvrez Godmode9 en maintenant (Start) au démarrage -1. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois qu’elle a complété +1. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois qu’elle a terminé 1. Si vous êtes invité à régler la date et l'heure du RTC, appuyez sur (A) pour le faire, puis réglez la date et l'heure, puis appuyez sur (A) pour continuer Notez que, si vous avez dû régler la date et l'heure du RTC, vous devrez également régler l'heure dans les Paramètres du système après ce guide 1. Naviguez vers `[0:] SDCARD` -> `gm9` -1. Appuyez sur (A) sur le CTRTransfer `.bin` pour le sélectionner +1. Appuyez sur (A) sur le `.bin` de CTRTransfer pour le sélectionner 1. Sélectionnez "CTRNAND options..." 1. Sélectionnez "Transfer image to CTRNAND" 1. Si vous y êtes invité, sélectionnez "Transfer to SysNAND" @@ -61,17 +61,17 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Appuyez sur (A) pour autoriser l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée + Ce processus pendra du temps 1. Une fois le transfert terminé, appuyez sur (A) pour continuer -1. Appuyez (B) à décliner reverrouiller autorisations en écriture si vous êtes invité +1. Appuyez sur (B) pour décliner le verrouillage des autorisations en écriture si vous y êtes invité 1. Appuyez deux fois sur (B) pour revenir au menu principal 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu) -1. Sélectionnez "Scripts" +1. Sélectionnez "Scripts..." 1. Sélectionnez "ctrtransfer_ticket_copy" -1. Lorsque vous êtes invité, appuyez sur (A) +1. Lorsque vous y êtes invité, appuyez sur (A) 1. Appuyez sur (A) pour continuer -1. Appuyez (A) pour reverrouiller autorisations en écriture +1. Appuyez (A) pour verrouiller les autorisations en écriture 1. Appuyez sur (Start) pour redémarrer votre système 1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour du Système" - + Mettre à jour tout en utilisant B9S + Luma (ce que vous avez) sont sans danger + + Mettre à jour tout en ayant B9S + Luma (ce que vous avez) est sans danger + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique" #### Section III - Lancez FBI @@ -82,14 +82,14 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Sélectionnez "Switch the hb. title to the current app." 1. Appuyez sur (B) pour continuer 1. Appuyez sur (B) pour revenir au menu principal de Rosalina -1. Appuyez sur (B) pour quitter le menu de Rosalina +1. Appuyez sur (B) pour quitter le menu Rosalina 1. Appuyez sur (Home), puis fermez Mode téléchargement 1. Lancez l’application Mode téléchargement 1. Votre console devrait maintenant charger le Homebrew Launcher #### Section IV - Réinstallation des Tickets -Si le script trouvé qu'aucun ticket utilisateur vous pouvez sautez cette section +Si le script n'a trouvé aucun ticket utilisateur vous pouvez sauter cette section {: .notice--info} 1. Lancez FBI que vous trouverez dans la liste des homebrews @@ -98,11 +98,11 @@ Si le script trouvé qu'aucun ticket utilisateur vous pouvez sautez cette sectio 1. Sélectionnez "gm9" 1. Sélectionnez "out" 1. Sélectionnez "ctrtransfer_tickets" -1. Effectuez la manipulation suivante pour le dossier eshop, ou le dossier `unknown`, ou bien les deux si vous avez les deux +1. Effectuez la manipulation suivante pour le dossier `eshop`, ou le dossier `unknown`, ou bien les deux si vous avez les deux + Accédez au dossier + Sélectionnez "\" + Sélectionnez "Install and delete all tickets" - + Attendez. Votre console aura l'air d'avoir freeze (ne répond pas), laissez-lui du temps. + + Attendez. Si votre console semble ne plus répondre, laissez-lui du temps. + Appuyez sur (A) pour confirmer + Appuyez sur (B) pour refuser l'installation des tickets depuis le CDN. 1. Appuyez sur (Home) pour quitter FBI @@ -111,7 +111,7 @@ Si le script trouvé qu'aucun ticket utilisateur vous pouvez sautez cette sectio 1. Ouvrez Godmode9 en maintenant (Start) au démarrage 1. Naviguez vers `[0:] SDCARD` -> `gm9` -1. Pressez (X) sur l'image CTRTransfer `.bin` pour la supprimer +1. Pressez (X) sur le `.bin` de l'image CTRTransfer pour le supprimer 1. Appuyez sur (A) pour confirmer 1. Appuyez sur (Start) pour redémarrer votre système diff --git a/_pages/fr_FR/f3-(linux).txt b/_pages/fr_FR/f3-(linux).txt index fc0cab9b2f..e021659682 100644 --- a/_pages/fr_FR/f3-(linux).txt +++ b/_pages/fr_FR/f3-(linux).txt @@ -2,11 +2,11 @@ title: "F3 (Linux)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise -Il s'agit d'une section en plus pour la vérification de votre carte SD afn de trouver des erreurs à l'aide de F3. +Cette section supplémentaire vous indique comment vérifier si votre carte SD ne contient pas d'erreurs, en utilisant F3. Selon la taille de votre carte SD et la vitesse de votre ordinateur, ce processus peut prendre jusqu'à plusieurs heures ! @@ -19,7 +19,7 @@ Cette page est uniquement destinée aux utilisateurs de Linux. Si vous n'êtes p ### Instructions 1. Décompressez le fichier `.zip` de f3 -1. `cd` dans le répertoire de f3 +1. Faites un `cd` vers le dossier de F3 1. Exécutez la commande `make` pour compiler F3 1. Insérez votre carte SD dans votre ordinateur 1. Montez votre carte SD diff --git a/_pages/fr_FR/f3x-(mac).txt b/_pages/fr_FR/f3x-(mac).txt index c7462c83ed..a531eb55c8 100644 --- a/_pages/fr_FR/f3x-(mac).txt +++ b/_pages/fr_FR/f3x-(mac).txt @@ -2,7 +2,7 @@ title: "F3X (Mac)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise diff --git a/_pages/fr_FR/faq.txt b/_pages/fr_FR/faq.txt index b23ca0b690..57c85392fc 100644 --- a/_pages/fr_FR/faq.txt +++ b/_pages/fr_FR/faq.txt @@ -8,27 +8,26 @@ title: "FAQ" **Q :** *Comment mettre à jour Luma3DS ?* **R:** Utilisez [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest){:target="_blank"} - **Q :** *J’ai entendu parler de cette chose payante (Gateway, Sky3DS, etc.), est-ce quelque chose dont j’ai besoin ?*. Est-ce quelque chose que j’ai besoin ?* -**R :** Non. boot9strap est une méthode de chargement hax qui s’exécute au démarrage. + **Q :** *J’ai entendu parler d'une chose payante (Gateway, Sky3DS, etc.). En ai-je besoin ?* +**R :** Non. boot9strap est une meilleure méthode pour charger des hax, et s’exécute plus tôt pendant démarrage. - **Q :** *Comment puis-je transférer mes sauvegardes de mon Gateway vers les jeux installés sur ma console ?* + **Q :** *Comment puis-je transférer des sauvegardes de mon setup Gateway vers les jeux installés sur ma console ?* **R :** Voir [cet article](https://gbatemp.net/threads/425743/) **Q :** *Est-il risqué de hacker ma console ?* -**R :** Les Bricks sont *en pratique* presque impossibles, à moins -que vous n'ignoriez/ne contourniez les étapes de vérification. +**R :** Bricker est maintenant *presque* impossible, à moins que vous n'ignoriez/ne contourniez toutes les étapes de vérification. **Q :** *Puis-je exécuter des homebrew et des émulateurs avec cela ?* -**R :** Oui ! Un Custom Firmware permet non seulement d'utiliser l'Homebrew Launcher, mais il vous donnera également accès aux hacks sur toutes les versions. Cela signifie que vous le garderez pour toujours, même avec des mises à jour. +**R :** Oui ! Un Custom Firmware permet non seulement d'utiliser l'Homebrew Launcher, mais il vous donnera également accès à des hacks sur toutes les versions. Cela signifie que vous le garderez pour toujours, même avec des mises à jour. - **Q :** *Puis-je l'utiliser pour jouer à des jeux d’autres régions ?* + **Q :** *Puis-je l'utiliser pour jouer à des jeux de d’autres régions ?* **R :** Luma3DS prend en charge les patchs Region Free, ce qui permet aux utilisateurs d’installer des jeux de toutes les régions sans aucune modification supplémentaire. **Q :** *Est-il sûr de mettre à jour ma SysNAND avec un CFW ?* **R :** Oui. C’est sûr, arrêtez de demander. **Q :** *Où dois-je aller pour avoir de l'aide ?* -**R:** Pour obtenir de l'aide, demandez de l'aide à [Nintendo Homebrew sur Discord(Anglais)](https://discord.gg/MWxPgEp). +**R :** Pour obtenir de l'aide, demandez de l'aide au [Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) (Anglais). **Q :** *Puis-je faire cela avec une carte SD 4 Go (ou moins)  ?* **R :** Oui ! @@ -42,8 +41,8 @@ que vous n'ignoriez/ne contourniez les étapes de vérification. **Q :** *Puis-je garder mon NNID ?* **R :** Si vous démarrez avec un NNID et suivez toutes les étapes, vous garderez votre NNID à la fin. - **Q :** *Et le Transferts de données ?* -**R :** Quand vous avez complété le guide, vous pouvez faire un transfert de système depuis et vers une 3DS ou 2DS en B9S exactement de la même façon que vous le feriez avec une console stock ou avec un EmuNAND (Vous allez perde tout jeu que vous n'avez pas acheté/thème/DLC dans le transfert; Les sauvegardes vont rester même pour les jeux qui sont perdus.). + **Q :** *Et les transferts de système ?* +**R :** Quand vous avez terminé le guide, vous pouvez faire un transfert de système depuis et vers une 3DS ou 2DS avec B9S exactement de la même façon que vous le feriez avec une console stock ou avec un EmuNAND (vous perdrez tout jeu/thème/DLC que vous n'avez pas acheté pendant le transfert ; les sauvegardes seront toutes conservées, même pour ces jeux). **Q :** *Puis-je faire cela sans ordinateur (ex : un téléphone Android) ?* **R :** Tout ce dont vous avez besoin est la possibilité de mettre des fichiers sur une carte SD ! diff --git a/_pages/fr_FR/file-extensions-(windows).txt b/_pages/fr_FR/file-extensions-(windows).txt index 34a078b130..84be79ad27 100644 --- a/_pages/fr_FR/file-extensions-(windows).txt +++ b/_pages/fr_FR/file-extensions-(windows).txt @@ -6,7 +6,7 @@ title: "Extensions de fichier (Windows)" ### Lecture requise -C'est une section supplémentaire pour désactiver le fait que Windows cache les extensions des fichiers. +Ceci est une section additionelle pour désactiver le comportement par défaut de Windows de cacher les extensions de fichier. Cela rendra la tâche plus simple pour trouver les différents fichiers mentionnés dans la suite de ce guide. diff --git a/_pages/fr_FR/finalizing-setup.txt b/_pages/fr_FR/finalizing-setup.txt index c1847a4b1d..304b73e9d1 100644 --- a/_pages/fr_FR/finalizing-setup.txt +++ b/_pages/fr_FR/finalizing-setup.txt @@ -6,9 +6,9 @@ title: "Finalisation de l'installation" ### Lecture requise -Le fichier `boot.firm` est ce qui est lancé par boot9strap lui-même après qu'il ait fini le chargement de la NAND, et peut être n’importe quel payload arm9 valide dans le format FIRM. Ce fichier peut être remplacé à tout moment, même si Luma3DS permet le lancement d’autres payloads arm9 au format FIRM à l’aide du chainloader Luma3DS . +Le fichier `boot.firm` est ce qui est lancé par boot9strap lui-même après qu'il ait fini de charger depuis la NAND, et peut être n’importe quel payload arm9 valide dans le format FIRM. Ce fichier peut être remplacé à tout moment, même si Luma3DS permet le lancement d’autres payloads arm9 au format FIRM à l’aide du chainloader Luma3DS . -Dans ce cas, nous utilisons Luma3DS de [AuroraWright](https://github.com/AuroraWright/) pour démarrer directement une SysNAND patchée, nous permettant de contourner complètement la nécessité d'une EmuNAND quelconque, ce qui simplifie grandement l'utilisation d'une 3DS piratée en plus d'économiser de l'espace sur votre carte SD. +Dans notre cas, nous utilisons Luma3DS de [AuroraWright](https://github.com/AuroraWright/) pour démarrer directement une SysNAND patchée, nous permettant de contourner complètement la nécessité d'une EmuNAND quelconque, ce qui simplifie grandement l'utilisation d'une 3DS piratée en plus d'économiser de l'espace sur votre carte SD. Durant cette étape, nous allons également configurer les programmes suivants : @@ -40,7 +40,7 @@ Durant cette étape, nous allons également configurer les programmes suivants : 1. Créez un dossier nommé `3ds` à la racine de votre carte SD si celui ci n'existe pas 1. Créez un dossier nommé `cias` à la racine de votre carte SD si celui ci n'existe pas 1. Copiez `FBI.3dsx` dans le dossier `/3ds/` de votre carte SD -1. Copiez le fichier `hblauncher_loader.cia` se trouvant dans le fichier hblauncher_loader`.zip` vers le répertoire `/cias/` de votre carte SD +1. Copiez le fichier `hblauncher_loader.cia` se trouvant dans le fichier `.zip` de hblauncher_loader vers le répertoire `/cias/` de votre carte SD 1. Copiez `lumaupdater.cia` vers le dossier`/cias/` sur votre carte SD 1. Copiez `FBI.cia` vers le répertoire `/cias/` sur votre carte SD 1. Copiez `DSP1.cia` vers le répertoire `/cias/` sur votre carte SD @@ -51,7 +51,7 @@ Durant cette étape, nous allons également configurer les programmes suivants : {: .notice--info} 1. Créez un dossier nommé `payloads` dans le dossier `luma` sur votre carte SD, si il n’existe pas déjà -1. Copiez le fichier `GodMode9.firm` de l'archive GodMode9 `.zip` dans le dossier `/luma/payloads/` sur votre carte SD +1. Copiez le fichier `GodMode9.firm` de l'archive `.zip` de GodMode9 dans le dossier `/luma/payloads/` sur votre carte SD 1. Copiez le dossier `gm9` de GodMode9 `.zip` à la racine de votre carte SD 1. Copiez `setup_ctrnand_luma3ds.gm9` dans le dossier `/gm9/scripts/` sur votre carte SD 1. Copiez `cleanup_sd_card.gm9` dans le dossier `/gm9/scripts/` sur votre carte SD @@ -67,14 +67,14 @@ Durant cette étape, nous allons également configurer les programmes suivants : #### Section II - Mise à jour du système -Si, vous avez suivi une version précédente de ce guide, vous avez CTRTransféré votre *New 3DS* en 2.1.0, il est maintenant temps de [restaurer votre sauvegarde de la NAND](godmode9-usage#restoring-a-nand-backup) avant de faire cette section. +Si, en suivant une version précédente de ce guide, vous avez CTRTransféré votre *New 3DS* en 2.1.0, il est maintenant temps de [restaurer votre sauvegarde de la NAND](godmode9-usage#restoring-a-nand-backup) avant de faire cette section. {: .notice--danger} -Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vous souhaitez transférer le contenu de votre précédent EmuNAND sur votre nouvelle SysNAND CFW, il est temps de [Suivre Transférer EmuNAND](move-emunand) avant de suivre cette section. +Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vous souhaitez transférer le contenu de votre précédent EmuNAND sur votre nouvelle SysNAND CFW, il est temps de [Transférer votre EmuNAND](move-emunand) avant de suivre cette section. {: .notice--info} 1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour du Système" - + Mettre à jour tout en utilisant B9S + Luma (ce que vous avez) sont sans danger + + Mettre à jour tout en ayant B9S + Luma (ce que vous avez) est sans danger + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique" + Si cela vous donne encore une erreur, [suivez CTRTransfer](ctrtransfer), puis essayez de mettre à jour à nouveau @@ -86,7 +86,7 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou 1. Sélectionnez "Switch the hb. title to the current app." 1. Appuyez sur (B) pour continuer 1. Appuyez sur (B) pour revenir au menu principal de Rosalina -1. Appuyez sur (B) pour quitter le menu de Rosalina +1. Appuyez sur (B) pour quitter le menu Rosalina 1. Appuyez sur (Home), puis fermez Mode téléchargement 1. Lancez l’application Mode téléchargement 1. Votre console devrait maintenant charger le Homebrew Launcher @@ -96,19 +96,19 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou 1. Naviguez vers `SD` -> `cias` 1. Sélectionnez "\" -1. Sélectionnez l'option "install all CIAs" (installer toutes les CIAs), appuyez ensuite sur (A) pour confirmer votre choix +1. Sélectionnez l'option "install and delete all CIAs" (installer et effacer tous les CIAs), appuyez ensuite sur (A) pour confirmer votre choix 1. Appuyez sur (Home), puis fermez Mode téléchargement #### Section V - Extraction du DSP 1. Lancez DSP1 -1. Une fois que c'est fini, presser (B) pour arrêter l'application et retourner au menu Home +1. Une fois que c'est fini, appuyez sur (B) pour auto-effacer l'application et retourner au menu Home #### Section VI - CTRNAND Luma3DS 1. Éteignez votre 3DS 1. Ouvrez Godmode9 en maintenant (Start) au démarrage -1. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois qu’elle a complété +1. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois terminé 1. Si vous êtes invité à régler la date et l'heure du RTC, appuyez sur (A) pour le faire, puis réglez la date et l'heure, puis appuyez sur (A) pour continuer Notez que, si vous avez dû régler la date et l'heure du RTC, vous devrez également régler l'heure dans les Paramètres du système après ce guide 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu) @@ -117,7 +117,7 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou 1. Lorsque vous êtes invité, appuyez sur (A) 1. Appuyez sur (A) pour autoriser l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée 1. Appuyez sur (A) pour continuer -1. Appuyez (A) pour reverrouiller autorisations en écriture +1. Appuyez (A) pour reverrouiller les autorisations en écriture #### Section VII - Sauvegarder les Fichiers Essentiels @@ -125,7 +125,7 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou 1. Sélectionnez "Scripts" 1. Sélectionnez "Backup SysNAND" 1. Appuyez sur (A) pour confirmer - + Ce processus pendra du temps + + Ce processus prendra un certain temps + Si une erreur apparaît, vérifiez que vous avez au moins 1,2 ou 1,3 Go d'espace libre sur votre carte SD 1. Appuyez sur (A) pour continuer 1. Maintenez (R) et appuyez sur (B) en même temps pour éjecter votre carte SD @@ -171,7 +171,7 @@ Vous pouvez maintenant appuyer simultanément sur (L) + (Bas) + (Select) pour d
{{ notice-6 | markdownify }}
-Pour utilisez [NTR CFW](https://github.com/44670/BootNTR/), installez [BootNTR Selector](https://gbatemp.net/threads/432911/). +Pour utiliser [NTR CFW](https://github.com/44670/BootNTR/), installez [BootNTR Selector](https://gbatemp.net/threads/432911/). {: .notice--info} Pour plus d'informations sur le changement de la région de votre 3DS, veuillez consulter la page [Changement de région](region-changing). @@ -180,7 +180,7 @@ Pour plus d'informations sur le changement de la région de votre 3DS, veuillez Pour plus d’informations sur l’utilisation des diverses fonctionnalités de GodMode9, regardez la page [Utilisation de GodMode9](godmode9-usage). {: .notice--success} -Pour plus d'informations concernant les diverses fonctionnalités de Luma3DS, veuillez consulter [Le wiki dédié](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). +Pour plus d'informations concernant les diverses fonctionnalités de Luma3DS, veuillez consulter [le wiki dédié](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} Pour plus d'informations sur l'installation des thèmes personnalisés et des splash screens (image au démarrage de la console), consultez [Theme Plaza](https://themeplaza.eu/). diff --git a/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt index 2c48a087d6..3ea1f7bcd3 100644 --- a/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt @@ -2,41 +2,41 @@ title: "Flasher ntrboot (3DS Multi System)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise -Avant de commencez , assurez vous de connaître les informations sur [Ntrboot](ntrboot) +Avant de commencer, assurez vous d'avoir lu toutes les informations sur [ntrboot](ntrboot) -Cette méthode nécessite un accès temporaire à un second périphérique de la famille 3DS qui utilise déjà boot9strap. Votre linker n'a pas à supporter la version des linkers (ex: si votre linker supporte <=4.3.0, cette étape fonctionnera avec un 3DS en 12.0. x et l'autre en 9.0. x. Consultez le tableau des linkers sur [ntrboot](ntrboot) pour plus d’informations. +Cette méthode nécessite un accès temporaire à un second périphérique de la famille 3DS qui utilise déjà boot9strap. Votre linker n'a pas besoin de fonctionner sur aucune des deux 3DS. Consultez le tableau des linkers sur [ntrboot](ntrboot) pour plus d’informations. -Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne **inutilisable**. C'est peu probable , mais notez que seule les originaux fonctionnent avec Ntrboot . Pour réduire les chances d'avoir une contrefaçon utilisez (ce site [NDS Card](http://www.nds-card.com/)) +Notez que dans de rares circonstances, il est possible que pendant le processus de flash sur un linker contrefait (ou un clone) celui-ci **brique** et devienne inutilisable de manière permanente. C'est peu probable, mais notez que seuls les originaux fonctionnent avec ntrboot. Pour réduire les chances de recevoir un linker contrefait, il est recommandé d'utiliser un site réputé pour acheter votre linker (comme [NDS Card](http://www.nds-card.com/)) {: .notice--danger} ## Ce dont vous avez besoin -* Votre ntrboot compatible Ds / Dsi flashcart  -* Deux dispositifs de famille de 3DS - + ** La 3DS source ** : La 3DS qui tourne déjà sous boot9strap - + **La 3DS cible**: la 3DS en firmware normal -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(ntr standard, pas le fichier `devkit`)* +* Votre linker compatible ntrboot  +* Deux dispositifs de la famille 3DS + + **La 3DS source** : La 3DS qui tourne déjà sous boot9strap + + **La 3DS cible** : la 3DS sur un firmware original non modifié +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(`ntr` standard, pas le fichier `devkit`)* * La dernière version de [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest){:target="_blank"} ### Instructions #### Section I - Préparatifs -1. Éteignez **La 3DS source** -1. Insérez la **carte SD de la 3DS source** dans votre ordinateur +1. Éteignez **la 3DS source** +1. Insérez la carte SD de **la 3DS source** dans votre ordinateur 1. Créez un dossier appelé `ntrboot` à la racine de votre carte SD -1. Copiez `boot9strap_ntr.firm` et `boot9strap_ntr.firm.sha depuis le fichier `.zip` de boot9strap ntr vers le dossier `/ntrboot/` sur votre carte SD -1. Copiez `ntrboot_flasher.firm` dans le dossier `/luma/payloads/` sur la carte SD de **la 3DS source.** -1. Réinsérez **de nouveau la carte SD de la source 3DS** -1. Insérez votre linker DS dans *la 3DS source** +1. Copiez `boot9strap_ntr.firm` et `boot9strap_ntr.firm.sha` depuis le fichier `.zip` de boot9strap ntr vers le dossier `/ntrboot/` sur votre carte SD +1. Copiez `ntrboot_flasher.firm` dans le dossier `/luma/payloads/` sur la carte SD de **la 3DS source** +1. Réinsérez la carte SD de **la 3DS source** dans **la 3DS source** +1. Insérez votre linker DS / DSi compatible ntrboot dans **la 3DS source** #### Section II - Flasher ntrboot -1. Démarrez le Luma3DS chainloader en maintenant (Start) pendant le démarrage **source 3DS** +1. Démarrez le chainloader de Luma3DS en maintenant (Start) pendant le démarrage de **la 3DS source** 1. Selectionnez "ntrboot_flasher" 1. Lisez l'avertissement de l'écran rouge 1. Appuyez sur (A) pour continuer @@ -47,10 +47,10 @@ Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne **i 1. Appuyez sur (A) pour continuer 1. Appuyez sur (A) pour revenir au menu principal 1. Selectionnez "Inject Ntrboot" -1. Appuyer sur (A) pour ntrboot retail +1. Appuyez sur (A) pour ntrboot retail 1. Attendez que le processus soit terminé 1. Appuyez sur (A) pour revenir au menu principal -1. Appuyez sur (B) pour éteindre ** la 3DS source ** +1. Appuyez sur (B) pour éteindre **la 3DS source** ___ diff --git a/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt b/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt index b2e89680a2..7b69c6bd75 100644 --- a/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt @@ -6,17 +6,17 @@ title: "Flasher ntrboot (3DS Single System)" ### Lecture requise -Avant de commencez , assurez vous de connaître les informations sur [Ntrboot](ntrboot) +Avant de commencer, assurez vous d'avoir lu toutes les informations sur [ntrboot](ntrboot) -Cette méthode n’exige rien de plus que votre 3DS original stock. Cette méthode utilise le linker pour lancer le flasheur ntrboot contenu dans le fichier `.nds` sur votre 3DS. Cela signifie que votre Linker doit supporter le lancement des fichiers `.nds` sur votre 3DS. Référez vous au tableau des linkers pour plus d'informations. Consultez le tableau des linkers sur [ntrboot](ntrboot) pour plus d’informations. +Cette méthode n’exige rien de plus que votre 3DS original stock et un linker compatible. Cette méthode utilise le linker pour lancer le fichier `.nds` du flasheur ntrboot sur votre 3DS. Cela signifie que votre linker doit pouvoir lancer des fichiers `.nds` sur votre 3DS. Consultez le tableau des linkers sur [ntrboot](ntrboot) pour plus d’informations. -Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inutilsable . C'est peu probable, mais notez que seuls les originaux fonctionnent avec Ntrboot. Pour réduire les chances d'avoir une contrefaçon utilisez ([NDS Card](http://www.nds-card.com/)) +Notez que dans de rares circonstances, il est possible que pendant le processus de flash sur un linker contrefait (ou un clone) celui-ci **brique** et devienne inutilisable de manière permanente. C'est peu probable, mais notez que seuls les originaux fonctionnent avec ntrboot. Pour réduire les chances de recevoir un linker contrefait, il est recommandé d'utiliser un site réputé pour acheter votre linker (comme [NDS Card](http://www.nds-card.com/)) {: .notice--danger} ## Ce dont vous avez besoin * Votre linker compatible ntrboot -* La dernière version de [ds_ntrboot_flasher] (https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest){:target="_blank"} *(le fichier `dsi`)* +* La dernière version de [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest){:target="_blank"} *(flasheur `dsi` ; pas le flasheur standard)* ### Instructions @@ -25,7 +25,7 @@ Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inu 1. Éteignez votre 3DS 1. Insérez votre carte SD du Linker dans votre ordinateur 1. Copiez `ds_ntrboot_flasher_dsi.nds` sur la carte SD de votre linker -1. Réinsérez la carte SD dans votre Linker +1. Réinsérez la carte SD dans votre linker 1. Insérez votre linker DS dans votre console #### Section II - Flasher ntrboot diff --git a/_pages/fr_FR/flashing-ntrboot-(dsi).txt b/_pages/fr_FR/flashing-ntrboot-(dsi).txt index 1efb563e8e..0f16cc133e 100644 --- a/_pages/fr_FR/flashing-ntrboot-(dsi).txt +++ b/_pages/fr_FR/flashing-ntrboot-(dsi).txt @@ -2,33 +2,33 @@ title: "Flasher ntrboot (DSi)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise -Avant de commencez , assurez vous de connaître les informations sur [Ntrboot](ntrboot) +Avant de commencer, assurez vous d'avoir lu toutes les informations sur [ntrboot](ntrboot) Cette méthode nécessite un accès temporaire à une Nintendo DSI qui soit compatible avec votre linker. Cette méthode utilise le linker pour exécuter le flasheur ntrboot `.nds` sur votre DSi. Cela signifie que votre linker doit pouvoir lancer des fichiers `.nds` sur votre NDS. Consultez le tableau des linkers sur [ntrboot](ntrboot) pour plus d’informations. -Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inutilsable . C'est peu probable , mais notez que seule les originaux fonctionnent avec Ntrboot . Pour réduire les chances d'avoir une contrefaçon utilisez ([NDS Card](http://www.nds-card.com/)) +Notez que dans de rares circonstances, il est possible que pendant le processus de flash sur un linker contrefait (ou un clone) celui-ci **brique** et devienne inutilisable de manière permanente. C'est peu probable, mais notez que seuls les originaux fonctionnent avec ntrboot. Pour réduire les chances de recevoir un linker contrefait, il est recommandé d'utiliser un site réputé pour acheter votre linker (comme [NDS Card](http://www.nds-card.com/)) {: .notice--danger} ## Ce dont vous avez besoin * Votre linker compatible ntrboot -* Deux Consoles - + ** La DSI source **: la Nintendo DSI qui est compatible avec votre cartouche - + **La 3DS cible**: la 3DS sur un firmware non touché -* La dernière version de [ds_ntrboot_flasher] (https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest){:target="_blank"} *(le fichier `dsi`)* +* Deux consoles + + **La DSI source** : la Nintendo DSi qui est compatible avec votre linker + + **La 3DS cible** : la 3DS sur un firmware original non modifié +* La dernière version de [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest){:target="_blank"} *(flasheur `dsi` ; pas le flasheur standard)* ### Instructions #### Section I - Préparatifs -1. Éteignez **La DSI source** -1. Insérez votre carte SD du Linker dans votre ordinateur +1. Éteignez **la DSi source** +1. Insérez la carte SD de votre linker dans votre ordinateur 1. Copiez `ds_ntrboot_flasher_dsi.nds` sur la carte SD de votre linker -1. Réinsérez la carte SD dans votre Linker +1. Réinsérez la carte SD dans votre linker 1. Insérez votre cartouche compatible NTRBoot dans ** la DSI source ** #### Section II - Flasher ntrboot diff --git a/_pages/fr_FR/flashing-ntrboot-(nds).txt b/_pages/fr_FR/flashing-ntrboot-(nds).txt index aabf34139b..a44d0c0d30 100644 --- a/_pages/fr_FR/flashing-ntrboot-(nds).txt +++ b/_pages/fr_FR/flashing-ntrboot-(nds).txt @@ -2,15 +2,15 @@ title: "Flasher ntrboot (NDS)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise -Avant de commencez , assurez vous de connaître les informations sur [Ntrboot](ntrboot) +Avant de commencer, assurez vous d'avoir lu toutes les informations sur [ntrboot](ntrboot) Cette méthode nécessite un accès temporaire à une Nintendo DS ou DS LITE qui soit compatible avec votre linker. -Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne inutilsable . C'est peu probable , mais notez que seule les originaux fonctionnent avec Ntrboot . Pour réduire les chances d'avoir une contrefaçon utilisez ([NDS Card](http://www.nds-card.com/)) +Notez que dans de rares circonstances, il est possible que pendant le processus de flash sur un linker contrefait (ou un clone) celui-ci **brique** et devienne inutilisable de manière permanente. C'est peu probable, mais notez que seuls les originaux fonctionnent avec ntrboot. Pour réduire les chances de recevoir un linker contrefait, il est recommandé d'utiliser un site réputé pour acheter votre linker (comme [NDS Card](http://www.nds-card.com/)) {: .notice--danger} ## Ce dont vous avez besoin diff --git a/_pages/fr_FR/get-started-(old-3ds).txt b/_pages/fr_FR/get-started-(old-3ds).txt index d9c42b8412..4afe7cc8f9 100644 --- a/_pages/fr_FR/get-started-(old-3ds).txt +++ b/_pages/fr_FR/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ La version de votre console peut être trouvée en bas à droite de l'écran sup 4.0.0 - 4.5.0 - Installation de boot9strap (MSET) - Installation de boot9strap (Navigateur) - - - 5.0.0 8.1.0 Installation de boot9strap (Soundhax) diff --git a/_pages/fr_FR/godmode9-usage.txt b/_pages/fr_FR/godmode9-usage.txt index 5fd20d5c18..873d673968 100644 --- a/_pages/fr_FR/godmode9-usage.txt +++ b/_pages/fr_FR/godmode9-usage.txt @@ -11,7 +11,7 @@ Pour de l'aide sur GodMode9 ainsi que sur le scripting, et pour être tenu à jo GodMode9 est un navigateur de fichiers avec un accès complet pour la console de Nintendo 3DS, vous donnant accès à votre carte SD, les partitions FAT à l’intérieur de votre SysNAND et EmuNAND et fondamentalement rien d’autre. Parmi les autres fonctionnalités, vous pouvez copier, supprimer, renommer des fichiers et créer des dossiers. -Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . +Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyer sur (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . GodMode9 est un logiciel puissant qui a la capacité de modifier essentiellement n'importe quoi sur votre console. Bien que beaucoup de ces modifications soient verrouillées derrière un système de permissions, et qu'il est impossible d'effectuer accidentellement des actions dangereuses sans déverrouiller délibérément les permissions, vous devez quand même suivre attentivement les instructions et conserver les sauvegardes au cas où. diff --git a/_pages/fr_FR/h2testw-(windows).txt b/_pages/fr_FR/h2testw-(windows).txt index 3e50c0e5af..1219f04b0a 100644 --- a/_pages/fr_FR/h2testw-(windows).txt +++ b/_pages/fr_FR/h2testw-(windows).txt @@ -2,7 +2,7 @@ title: "H2testw (Windows)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise diff --git a/_pages/fr_FR/homebrew-launcher-(soundhax).txt b/_pages/fr_FR/homebrew-launcher-(soundhax).txt index e5eb53a9aa..3c763fe1fe 100644 --- a/_pages/fr_FR/homebrew-launcher-(soundhax).txt +++ b/_pages/fr_FR/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Il existe différentes méthodes pour lancer l'Homebrew Launcher. -SoundHax est compatible pour les versions du firmware comprises entre 9.0.0 et 11.3.0 pour les régions EUR, JPN, KOR et USA. +Soundhax (lorsque combiné avec le Homebrew Launcher) est compatible avec les versions comprises entre 9.0.0 et 11.3.0 pour les régions EUR, JPN, KOR et USA. Assurez vous que la communication sans fil de votre appareil est allumée, vu que udsploit (utilisé dans la page suivante) aura besoin du module sans fil actif pour fonctionner, de plus certains appareils (New 3DS, New 2DS et Old 2DS) ne peuvent pas régler la Communication sans fil depuis le Homebrew Launcher. La Communication sans fil doit juste être allumée; la connexion à un point d’accès n’est pas nécessaire. @@ -26,7 +26,7 @@ Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une ## Ce dont vous avez besoin * La dernière version de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* La dernière version de [Soundhax](http://soundhax.com/) *(en fonction du modèle de votre console et de sa région)* +* La dernière version de [Soundhax](http://soundhax.com/) *(en fonction de votre console, de son modèle, et de sa région)* * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(boot9strap standard, pas le fichier `devkit` ni le fichier `ntr`)* * La dernière version de [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(le fichier`.3dsx`)* diff --git a/_pages/fr_FR/installing-boot9strap-(2xrsa).txt b/_pages/fr_FR/installing-boot9strap-(2xrsa).txt index 9bbbfba7bd..050a526a3f 100644 --- a/_pages/fr_FR/installing-boot9strap-(2xrsa).txt +++ b/_pages/fr_FR/installing-boot9strap-(2xrsa).txt @@ -2,7 +2,7 @@ title: "Installer boot9strap (2xrsa)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt index c1d27cdda6..976b1b494a 100644 --- a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt +++ b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt @@ -6,7 +6,7 @@ title: "Installer boot9strap (DSiWare Game Injection)" ### Lecture requise -Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . +Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyer sur (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . Pour utiliser les liens suivants [magnet](https://fr.wikipedia.org/wiki/Magnet_(standard)), vous avez besoin d'un client Torrent comme [Deluge](http://dev.deluge-torrent.org/wiki/Download). diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt index b7ec57a04d..01075f4c9f 100644 --- a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt +++ b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection-list).txt @@ -2,7 +2,7 @@ title: "Installer boot9strap (Liste des jeux pour l'injection DSiWare)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt index f5c73d043d..303c886ab2 100644 --- a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt +++ b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt @@ -19,7 +19,7 @@ Si vous n'utilisez pas le bon `.firm` correspondant à la 3DS cible, vous allez ## Ce dont vous avez besoin -* Deux dispositifs de famille de 3DS +* Deux dispositifs de la famille 3DS + **La 3DS source** : la console possédant *la dernière version* de boot9strap + **La 3DS cible**: la 3DS en firmware normal *en 11.6.0* * Posséder (et avoir installé) un des titres DSiware exploitables suivants (une copie piratée du jeu ne fonctionnera **pas**) sur **la 3DS source** diff --git a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt index 0857362cbf..22115aa66e 100644 --- a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt +++ b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt @@ -2,7 +2,7 @@ title: "Installer boot9strap (ntrboot)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise @@ -125,7 +125,7 @@ Ne faites pas ceci , tant que vous n'avez pas fini les instructions de cette pag 1. Insérez votre carte SD dans votre ordinateur + Ceci signifie la carte SD de votre 3DS, et *non* la carte SD de votre linker 1. Créez un dossier appelé `ntrboot` à la racine de votre carte SD -1. Copiez `backup.bin` de votre sauvegarde flashrom `.zip` dans le dossier `/ntrboot/` à la racine de votre carte SD +1. Copiez le fichier `.bin` venant du fichier `.zip` de votre sauvegarde flashrom dans le dossier `/ntrboot/` à la racine de votre carte SD 1. Créez un dossier appelé `payloads` dans le répertoire « luma » sur votre carte SD 1. Copiez `ntrboot_flasher.firm` dans le dossier `/luma/payloads/` sur votre carte SD 1. Réinsérez votre carte SD dans votre 3DS diff --git a/_pages/fr_FR/installing-boot9strap-(soundhax).txt b/_pages/fr_FR/installing-boot9strap-(soundhax).txt index f5242441f6..be1f6847c4 100644 --- a/_pages/fr_FR/installing-boot9strap-(soundhax).txt +++ b/_pages/fr_FR/installing-boot9strap-(soundhax).txt @@ -2,13 +2,13 @@ title: "Installer boot9strap (Soundhax)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une EmuNAND, ce guide s'applique exclusivement à votre SysNAND et vous devez suivre toutes les instructions depuis ou vers votre SysNAND. Notez que les termes EmuNAND et RedNAND font référence à des implémentations légèrement différentes du [même concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (lorsque combiné avec pre9otherapp) est compatible avec les versions comprises entre 5.0.0 et 8.1.0 pour les régions EUR, JPN, KOR et USA. +Soundhax (lorsque combiné avec pre9otherapp) est compatible avec les versions comprises entre 4.0.0 et 8.1.0 pour les régions EUR, JPN, KOR et USA. Pour extraire les fichiers `.7z` sur cette page, vous aurez besoin d'un programme d'archives comme [7-Zip](http://www.7-zip.org/) ou [The Unarchiver](https://theunarchiver.com). @@ -23,7 +23,7 @@ Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une ## Ce dont vous avez besoin -* La dernière version de [Soundhax](http://soundhax.com/) *(en fonction du modèle de votre console et de sa région)* +* La dernière version de [Soundhax](http://soundhax.com/) *(en fonction de votre console, de son modèle, et de sa région)* * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(boot9strap standard, pas le fichier `devkit` et ni le fichier `ntr`)* * La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(le fichier `.7z`)* diff --git a/_pages/fr_FR/move-emunand.txt b/_pages/fr_FR/move-emunand.txt index 0ab138833b..ae4f0bb075 100644 --- a/_pages/fr_FR/move-emunand.txt +++ b/_pages/fr_FR/move-emunand.txt @@ -8,7 +8,7 @@ title: "Transférer votre EmuNAND vers votre SysNAND" Ceci est une section complémentaire qui vous permettra de déplacer le contenu de votre EmuNAND vers votre CFW SysNAND, puis de supprimer l'ancienne partition EmuNAND. Notez que les termes EmuNAND et RedNAND font référence à des implémentations légèrement différentes du [même concept](http://3dbrew.org/wiki/NAND_Redirection). -Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . +Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyer sur (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. {: .notice--danger} diff --git a/_pages/fr_FR/ntrboot.txt b/_pages/fr_FR/ntrboot.txt index bd3393091e..8d6c929324 100644 --- a/_pages/fr_FR/ntrboot.txt +++ b/_pages/fr_FR/ntrboot.txt @@ -2,7 +2,7 @@ title: "ntrboot" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} Si vous avez déjà flashé ntrboot sur votre linker ou votre linker est pré-flashé ntrboot, allez à [Installer boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) pour des instructions et comment l'utiliser . {: .notice--success} diff --git a/_pages/fr_FR/region-changing.txt b/_pages/fr_FR/region-changing.txt index d27a30eac8..c581b40ae5 100644 --- a/_pages/fr_FR/region-changing.txt +++ b/_pages/fr_FR/region-changing.txt @@ -64,7 +64,7 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Si vous êtes invité à régler la date et l'heure du RTC, appuyez sur (A) pour le faire, puis réglez la date et l'heure, puis appuyez sur (A) pour continuer Notez que, si vous avez dû régler la date et l'heure du RTC, vous devrez également régler l'heure dans les Paramètres du système après ce guide 1. Naviguez vers `[0:] SDCARD` -> `gm9` -1. Appuyez sur (A) sur le CTRTransfer `.bin` pour le sélectionner +1. Appuyez sur (A) sur le `.bin` de CTRTransfer pour le sélectionner 1. Sélectionnez "CTRNAND options..." 1. Sélectionnez "Transfer image to CTRNAND" 1. Si vous y êtes invité, sélectionnez "Transfer to SysNAND" @@ -82,7 +82,7 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Appuyez (A) pour reverrouiller autorisations en écriture 1. Appuyez sur (Start) pour redémarrer votre système 1. Mettez à jour votre console en vous rendant dans les Paramètres de la console, puis "Autres paramètres", puis tout à droite sur l'option "Mise à jour du Système" - + Mettre à jour tout en utilisant B9S + Luma (ce que vous avez) sont sans danger + + Mettre à jour tout en ayant B9S + Luma (ce que vous avez) est sans danger + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique" #### Section III - Lancez FBI @@ -93,7 +93,7 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Sélectionnez "Switch the hb. title to the current app." 1. Appuyez sur (B) pour continuer 1. Appuyez sur (B) pour revenir au menu principal de Rosalina -1. Appuyez sur (B) pour quitter le menu de Rosalina +1. Appuyez sur (B) pour quitter le menu Rosalina 1. Appuyez sur (Home), puis fermez Mode téléchargement 1. Lancez l’application Mode téléchargement 1. Votre console devrait maintenant charger le Homebrew Launcher @@ -109,7 +109,7 @@ Si le script trouvé qu'aucun ticket utilisateur vous pouvez sautez cette sectio 1. Sélectionnez "gm9" 1. Sélectionnez "out" 1. Sélectionnez "ctrtransfer_tickets" -1. Effectuez la manipulation suivante pour le dossier eshop, ou le dossier `unknown`, ou bien les deux si vous avez les deux +1. Effectuez la manipulation suivante pour le dossier `eshop`, ou le dossier `unknown`, ou bien les deux si vous avez les deux + Accédez au dossier + Sélectionnez "\" + Sélectionnez "Install and delete all tickets" @@ -130,7 +130,7 @@ Si le script trouvé qu'aucun ticket utilisateur vous pouvez sautez cette sectio 1. Ouvrez Godmode9 en maintenant (Start) au démarrage 1. Naviguez vers `[0:] SDCARD` -> `gm9` -1. Pressez (X) sur l'image CTRTransfer `.bin` pour la supprimer +1. Pressez (X) sur le `.bin` de l'image CTRTransfer pour le supprimer 1. Appuyez sur (A) pour confirmer 1. Appuyez sur (Start) pour redémarrer votre système diff --git a/_pages/fr_FR/troubleshooting.txt b/_pages/fr_FR/troubleshooting.txt index c5381c0717..c7e1d9d4f3 100644 --- a/_pages/fr_FR/troubleshooting.txt +++ b/_pages/fr_FR/troubleshooting.txt @@ -54,7 +54,7 @@ Pour utiliser les liens suivants [magnet](https://fr.wikipedia.org/wiki/Magnet_( ### Instructions -Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . +Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyer sur (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . {: .notice--info} 1. Ouvrez Godmode9 en maintenant (Start) au démarrage @@ -118,7 +118,7 @@ Les exploits basé sur le navigateur (tel que browserhax ou 2xrsa) sont parfois ### Instructions -Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . +Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyer sur (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . {: .notice--info} 1. Essayez de démarrer sans carte SD, puis de la réinsérer après le démarrage diff --git a/_pages/fr_FR/uninstall-cfw.txt b/_pages/fr_FR/uninstall-cfw.txt index 40beb3eaa5..93f57fd526 100644 --- a/_pages/fr_FR/uninstall-cfw.txt +++ b/_pages/fr_FR/uninstall-cfw.txt @@ -2,7 +2,7 @@ title: "Désinstaller CFW" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise @@ -15,7 +15,7 @@ Tous les jeux (illégitimes) non signés seront rendues inutilisables et peuvent Cela n’affectera pas votre NNID, n’importe quel jeux légitimement achetés ou des sauvegardes pour ces jeux légitimement achetés. -Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyez (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . +Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans le dossier `/luma/payloads/` sur votre carte SD, appuyer sur (Start) au démarrage affiche un "chainloader menu" où vous devrez utiliser le D-Pad et le bouton (A) pour sélectionner "GodMode9" . ## Ce dont vous avez besoin diff --git a/_pages/fr_FR/updating-b9s.txt b/_pages/fr_FR/updating-b9s.txt index 458e7deef2..d62bc91ce5 100644 --- a/_pages/fr_FR/updating-b9s.txt +++ b/_pages/fr_FR/updating-b9s.txt @@ -2,7 +2,7 @@ title: "Mettre à jour B9S" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise diff --git a/_pages/fr_FR/why-ads.txt b/_pages/fr_FR/why-ads.txt index bb5f0ab2a1..4523d12f72 100644 --- a/_pages/fr_FR/why-ads.txt +++ b/_pages/fr_FR/why-ads.txt @@ -9,7 +9,7 @@ Je maintiens ce guide, gratuitement, et m'assure qu'il est toujours à jour. A c Ce site ne vous coûte rien, et les publicités affichées ne sont pas intrusives. Mais si cela vous pose quand même problème, vous êtes libre de bloquer ces publicités. -Si vous bloquez les publicités, j'aimerais vous rappelez que j'accepte les [dons](donations), mais, de nouveau, vous n'êtes bien évidemment pas obligés d'en faire. +Si vous bloquez les publicités, j'aimerais vous rappeler que j'accepte les [dons](donations), mais, de nouveau, vous n'êtes bien évidemment pas obligés d'en faire. Merci,
Plailect diff --git a/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt b/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt index efb3c6c2e2..0989798127 100644 --- a/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "צריבת ntrboot (מערכת 3DS אחת)" לפני שאתם ממשיכים, שימו לב שקראתם את כל המידע ב [ntrboot](ntrboot) -שיטה זו דורשת כלום חוץ מה3DS הלא פרוץ שלכם וכרטיס פריצה תואם. שיטה זאת משתמשת בכרטיס פריצה כדי להריץ את קובץ ה`.nds` של צורב הNTRBOOT על ה3DS שלכם. זה אומר שכרטיס הפריצה שלכם חייב לתמוך בהרצת קבצי `.nds` על הגרסה של ה3DS שלכם. תסתכלו על הטבלה של כרטיסי הפריצה למידע נוסף. תסתכלו על הטבלה ב[ntrboot](ntrboot) למידע נוסף. +שיטה זו דורשת כלום חוץ מה3DS הלא פרוץ שלכם וכרטיס פריצה תואם. שיטה זאת משתמשת בכרטיס פריצה כדי להריץ את קובץ ה`.nds` של צורב הNTRBOOT על ה3DS שלכם. זה אומר שכרטיס הפריצה שלכם חייב לתמוך בהרצת קבצי `.nds` על הגרסה של ה3DS שלכם. תסתכלו על הטבלה ב[ntrboot](ntrboot) למידע נוסף. שימו לב שבמקרים נדירים, יתכן שתהליך הצריבה **ישבור** כרטיס פריצה מזוייף ויגרום לו לא לעבוד. זה לא סביר שייקרה, אבל בכל זאת רק כרטיסי פריצה מקוריים שמפורטים נתמכים. כדי להוריד את הסיכויים של להשיג כרטיס פריצה מזוייף, מומלץ להשתמש באתר אמין כדי לקנות את הכרטיס (כמו [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/he_IL/get-started-(old-3ds).txt b/_pages/he_IL/get-started-(old-3ds).txt index b395871567..ea66229b90 100644 --- a/_pages/he_IL/get-started-(old-3ds).txt +++ b/_pages/he_IL/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ For all versions you can also [Cartridge Update](cart-update) (or use a standard 4.0.0 - 4.5.0 - התקנת boot9strap (MSET) - התקנת boot9strap (דפדפן) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/he_IL/homebrew-launcher-(soundhax).txt b/_pages/he_IL/homebrew-launcher-(soundhax).txt index 728b7586ae..9866f21b7f 100644 --- a/_pages/he_IL/homebrew-launcher-(soundhax).txt +++ b/_pages/he_IL/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" להומברו לאנצ'ר יש הרבה דרכי הפעלה. -SoundHax תומך בגירסאות 9.0.0 עד 11.3.0 באזורים EUR, JPN, KOR, וUSA. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. תבדקו שהWi-Fi של הקונסולה שלכם דלוק כי udsploit (שנדרש בעמוד הבא) ידרוש את התוכנה של הWi-Fi כדי לעבוד, ומספר מכשירים (הNew 3DS New 2DS, וה Old 2DS) לא יכולים להדליק את הWi-Fi מהHomebrew Launcher. הWi-Fi רק צריך לדלוק; לא צריך לחבר אותו לרשת אלחוטית. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* הגרסה העדכנית של [Soundhax](http://soundhax.com/) *(למכשיר ואזור שלכם)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### הנחיות diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt index c9d617915d..3066418d24 100644 --- a/_pages/he_IL/installing-boot9strap-(ntrboot).txt +++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ ___ 1. תכניסו את ה-SD שלכם למחשב + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. תצרו ב-SD שלכם תיקייה חדשה בשם `ntrboot` -1. תעתיקו את `backup.bin`מה `.zip`של גיבוי הflashrom שלכם אל שורש כרטיס הSD שלכם +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. תצרו תיקייה חדשה בשם `payloads` בתוך התיקייה `luma` בכרטיס הSD שלכם 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם diff --git a/_pages/he_IL/installing-boot9strap-(soundhax).txt b/_pages/he_IL/installing-boot9strap-(soundhax).txt index 8b4b951fc6..fd260e5dbe 100644 --- a/_pages/he_IL/installing-boot9strap-(soundhax).txt +++ b/_pages/he_IL/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" אם המכשיר שלכם כבר פרוץ עם EmuNAND, המדריך הזה עוסק רק בSysNAND. תבצעו את ההוראות על SysNAND. Emunand וRednand כמעט מונחים נרדפים. -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* הגרסה העדכנית של [Soundhax](http://soundhax.com/) *(למכשיר ואזור שלכם)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt b/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt index 8dbae9ea4c..c72f154d05 100644 --- a/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "ntrboot flashelése (egy 3DS)" Mielőtt elkezdenénk, bizonyosodj meg róla, hogy mindent elolvastál az [ntrboot](ntrboot)-tal kapcsolatban -Ehhez a módszerhez mindössze egy gyári állapotú 3DS-re és egy kompatibilis flashkártyára van szükséged. Ez a módszer a flashkártyát használja, hogy futtassa az ntrboot flashelő `.nds` fájlt a 3DS-eden. Ez azt jelenti, hogy a flashkártyádnak támogatnia kell `.nds` fájlok futtatását a 3DS-ed verzióján. További információkért lásd a flashkártyák táblázatát. További információkért lásd a táblázatot az [ntrboot](ntrboot) oldalon. +Ehhez a módszerhez mindössze egy gyári állapotú 3DS-re és egy kompatibilis flashkártyára van szükséged. Ez a módszer a flashkártyát használja, hogy futtassa az ntrboot flashelő `.nds` fájlt a 3DS-eden. Ez azt jelenti, hogy a flashkártyádnak támogatnia kell `.nds` fájlok futtatását a 3DS-ed verzióján. További információkért lásd a táblázatot az [ntrboot](ntrboot) oldalon. Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési folyamat során **brickelődjön** néhány hamisított flashkártya és végleg használhatatlanná váljon. Ez elég valószínűtlen, azonban éppen emiatt csak eredeti flashkártyákat támogatunk. Hogy elkerüld hamisított flashkártyák vásárlását, ajánlott jó hírű oldalakon vásárolni (mint például az [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/hu_HU/get-started-(old-3ds).txt b/_pages/hu_HU/get-started-(old-3ds).txt index 88e49c0266..8a99a29617 100644 --- a/_pages/hu_HU/get-started-(old-3ds).txt +++ b/_pages/hu_HU/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Az eszközöd verziója megtalálható a System Settings-ben, a felső képerny 4.0.0 - 4.5.0 - boot9strap telepítése (MSET) - boot9strap telepítése (böngésző) - - - 5.0.0 8.1.0 boot9strap telepítése (Soundhax) diff --git a/_pages/hu_HU/homebrew-launcher-(soundhax).txt b/_pages/hu_HU/homebrew-launcher-(soundhax).txt index 28e262d32a..8d072aba54 100644 --- a/_pages/hu_HU/homebrew-launcher-(soundhax).txt +++ b/_pages/hu_HU/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" A Homebrew Launcher több, különböző belépési ponttal rendelkezik, azaz módszerrel arra, hogy elindítsuk. -A Soundhax kompatibilis az EUR, JPN, KOR, és USA régiókkal, a 9.0.0-stól a 11.3.0-s verzióig. +A Soundhax (ha a Homebrew Launcherrel használjuk) kompatibilis a 9.0.0-s verziótól egészen 11.3.0-ig az EUR, JPN, KOR, és USA régiókban. Bizonyosodj meg róla, hogy az eszközödön engedélyezve van a vezeték nélküli kapcsolat (Wireless Communication), ugyanis az udsploit-nak (amit a következő oldalon használunk) szüksége lesz rá, és néhány készülék (a New 3DS, a New 2DS, és az Old 2DS) esetében az nem állítható a Homebrew Launcher-ből. Elég, ha engedélyezve van a vezeték nélküli kapcsolat; nem kell hozzáférési ponthoz kapcsolódni. @@ -26,13 +26,13 @@ Ez azt jelenti, hogy kártyafrissítés egy olyan verzióról, amelyhez régebbi ### Amire szükséged lesz * A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} legújabb kiadása -* A [Soundhax](http://soundhax.com/) legúabb kiadása *(a készülékednek és régiónak megfelelő változat)* +* A [Soundhax](http://soundhax.com/) legújabb kiadása *(a régiódnak, készülékednek és rendszer verziódnak megfelelő változat)* * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} legújabb kiadása * A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* * A [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} legújabb kiadása *(a `.3dsx` fájl)* * A [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} legújabb kiadása * A [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} legújabb kiadása *(a `.7z` fájl)* -* Az [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(a készülékednek és régiónak megfelelő változat)* +* Az [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(a régiódnak és rendszer verziódnak megfelelő változat)* ### Utasítások diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt index a1095529d9..c8680135d1 100644 --- a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt +++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Ne hajtsd végre az itt leírt utasításokat mindaddig, amíg nem végeztél az 1. Helyezd az SD kártyád a számítógépbe + Ez a 3DS-ed SD kártyája, *nem* a flashkártyádé 1. Hozz létre egy mappát `ntrboot` néven az SD kártya gyökerében -1. Másold át a `backup.bin` fájlt a flashrom biztonsági mentésed `.zip`-jéből az SD kártyád gyökerében található `/ntrboot/` mappába +1. Másold át a `.bin` fájlt a flashrom biztonsági mentésed `.zip`-jéből az SD kártyád gyökerében található `/ntrboot/` mappába 1. Hozz létre egy mappát `payloads` néven az SD kártyád `luma` nevezetű mappájában 1. Másold át az `ntrboot_flasher.firm` az SD kártyád `/luma/payloads/` mappába 1. Tedd vissza az SD kártyád a készülékedbe diff --git a/_pages/hu_HU/installing-boot9strap-(soundhax).txt b/_pages/hu_HU/installing-boot9strap-(soundhax).txt index 9d2e352668..69f2563215 100644 --- a/_pages/hu_HU/installing-boot9strap-(soundhax).txt +++ b/_pages/hu_HU/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "boot9strap telepítése (Soundhax)" Ha hackelted már meg a 3DS-edet korábban, és már rendelkezel egy EmuNAND alapú CFW-vel, tudd, hogy ez az útmutató kizárólag a SysNAND-dal foglalkozik, és minden lépést a SysNAND-on kell majd alkalmaznod. Jó, ha tudod, hogy az EmuNAND és a RedNAND fogalmak [ugyanazon koncepció](http://3dbrew.org/wiki/NAND_Redirection) két, kicsiben különböző megvalósítását jelentik. -A Soundhax (amikor pre9otherapp-pal használjuk) kompatibilis az 5.0.0-s verziótól egészen a 8.1.0-esig az EUR, JPN, KOR, és USA régiókban. +A Soundhax (ha pre9otherapp-pel használjuk) kompatibilis a 4.0.0-s verziótól egészen 8.1.0-ig az EUR, JPN, KOR, és USA régiókban. Ahhoz, hogy kicsomagold az oldalon található `.7z` fájlokat, egy fájl archiváló programra lesz szükséged, mint amilyen a [7-Zip](http://www.7-zip.org/) vagy a [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ Ez azt jelenti, hogy kártyafrissítés egy olyan verzióról, amelyhez régebbi ### Amire szükséged lesz -* A [Soundhax](http://soundhax.com/) legúabb kiadása *(a készülékednek és régiónak megfelelő változat)* +* A [Soundhax](http://soundhax.com/) legújabb kiadása *(a régiódnak, készülékednek és rendszer verziódnak megfelelő változat)* * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} legújabb kiadása * A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* * A [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} legújabb kiadása *(a `.7z` fájl)* diff --git a/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt b/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/id_ID/get-started-(old-3ds).txt b/_pages/id_ID/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/id_ID/get-started-(old-3ds).txt +++ b/_pages/id_ID/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/id_ID/homebrew-launcher-(soundhax).txt b/_pages/id_ID/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/id_ID/homebrew-launcher-(soundhax).txt +++ b/_pages/id_ID/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/id_ID/installing-boot9strap-(ntrboot).txt +++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/id_ID/installing-boot9strap-(soundhax).txt b/_pages/id_ID/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/id_ID/installing-boot9strap-(soundhax).txt +++ b/_pages/id_ID/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt b/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt index 800789a587..07e1e2754e 100644 --- a/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flash di ntrboot (Singolo 3DS)" Prima di procedere, assicurati di aver letto tutte le informazioni presenti alla pagina [ntrboot](ntrboot) -Questo metodo richiede soltanto un 3DS non ancora modificato e una flashcart compatibile. La flashcart verrà utilizzata per avviare il file `.nds` del flasher di ntrboot sul tuo 3DS. Ciò significa che la tua flashcart deve supportare l'avvio di file `.nds` sulla versione di sistema del tuo 3DS. Leggi la tabella delle flashcart per maggiori informazioni. Leggi la tabella delle flashcart sulla pagina di [ntrboot](ntrboot) per maggiori informazioni. +Questo metodo richiede soltanto un 3DS non ancora modificato e una flashcart compatibile. La flashcart verrà utilizzata per avviare il file `.nds` del flasher di ntrboot sul tuo 3DS. Ciò significa che la tua flashcart deve supportare l'avvio di file `.nds` sulla versione di sistema del tuo 3DS. Leggi la tabella delle flashcart sulla pagina di [ntrboot](ntrboot) per maggiori informazioni. Tieni presente che in rare circostanze è possibile **brickare** una flashcart contraffatta durante il flashing, e renderla permanentemente inutilizzabile. È improbabile, tuttavia sono supportate soltanto le flashcart originali qui indicate. Per ridurre i rischi di ottenere una flashcart contraffatta, si raccomanda di comprarne una solo da siti affidabili (come [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/it_IT/get-started-(old-3ds).txt b/_pages/it_IT/get-started-(old-3ds).txt index b394ca6b5c..188076ae1d 100644 --- a/_pages/it_IT/get-started-(old-3ds).txt +++ b/_pages/it_IT/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Puoi vedere quale versione del software possiedi selezionando le Impostazioni de 4.0.0 - 4.5.0 - Installazione di boot9strap (MSET) - Installazione di boot9strap (Browser) - - - 5.0.0 8.1.0 Installazione di boot9strap (Soundhax) diff --git a/_pages/it_IT/homebrew-launcher-(soundhax).txt b/_pages/it_IT/homebrew-launcher-(soundhax).txt index 78f7c9e0bf..0a969c3fbd 100644 --- a/_pages/it_IT/homebrew-launcher-(soundhax).txt +++ b/_pages/it_IT/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" L'Homebrew Launcher ha numerosi entrypoint, o metodi per essere avviato. -Soundhax è compatibile con le versioni del software comprese tra 9.0.0 e 11.3.0 nelle regioni EUR, JPN, KOR e USA. +Soundhax (combinato con l'Homebrew Launcher) è compatibile con le versioni del software comprese tra 9.0.0 e 11.3.0 nelle regioni EUR, JPN, KOR e USA. Assicurati che la comunicazione wireless sia attiva dato che udsploit (usato nella prossima pagina) ha bisogno di poter accedere al modulo wireless della console, e alcune (come il New 3DS, il New 2DS e l'Old 2DS) non possono gestirne l'attivazione tramite Homebrew Launcher. Non è necessaria la connessione ad un access point. @@ -26,13 +26,13 @@ Ciò significa che se aggiorni con una scheda di gioco da una versione avente un ### Cosa serve * L'ultima versione dell'[Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* L'ultima versione di [Soundhax](http://soundhax.com/) *(adatta alla tua console e alla tua regione)* +* L'ultima versione di [Soundhax](http://soundhax.com/) *(adatta alla regione, tipo e versione della console)* * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(il file `.3dsx`)* * L'ultima versione di [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(il file `.7z`)* -* Il file [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(adatto alla versione e alla regione della console)* +* Il file [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(adatto alla regione e alla versione della console)* ### Istruzioni diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt index 86c572c268..74cae4d3b1 100644 --- a/_pages/it_IT/installing-boot9strap-(ntrboot).txt +++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Non seguire questa parte finché non avrai completato tutte le altre istruzioni 1. Inserisci la scheda SD nel tuo computer + Questa è la scheda SD del tuo 3DS, *non* la scheda SD della tua flashcart 1. Crea una cartella chiamata `ntrboot` nella directory principale della tua scheda SD -1. Copia il file `backup.bin` dal backup `.zip` della tua flashrom nella cartella `/ntrboot/` nella directory principale della tua scheda SD +1. Copia il file `.bin` dal backup `.zip` della tua flashrom nella cartella `/ntrboot/` nella directory principale della tua scheda SD 1. Crea una cartella chiamata `payloads` nella cartella `luma` della tua scheda SD 1. Copia il file `ntrboot_flasher.firm` nella cartella `/luma/payloads` della tua scheda SD 1. Reinserisci la scheda SD nella tua console diff --git a/_pages/it_IT/installing-boot9strap-(soundhax).txt b/_pages/it_IT/installing-boot9strap-(soundhax).txt index 2abe59ecbc..fd24200a4b 100644 --- a/_pages/it_IT/installing-boot9strap-(soundhax).txt +++ b/_pages/it_IT/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installazione di boot9strap (Soundhax)" Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su EmuNAND, ricorda che questa guida interessa solamente la SysNAND per cui dovresti seguire le istruzioni in tale modalità. Tieni presente che i termini EmuNAND e RedNAND si riferiscono a due implementazioni leggermente diverse [dello stesso concetto](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (combinato a pre9otherapp) è compatibile con le versioni del software comprese tra 5.0.0 e 8.1.0 nelle regioni EUR, JPN, KOR e USA. +Soundhax (combinato a pre9otherapp) è compatibile con le versioni del software comprese tra 4.0.0 e 8.1.0 nelle regioni EUR, JPN, KOR e USA. Per estrarre i file `.7z` presenti in questa pagina, avrai bisogno di un gestore di file compressi come [7-Zip](http://www.7-zip.org/) o [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ Ciò significa che se aggiornate con una scheda di gioco da una versione avente ### Cosa serve -* L'ultima versione di [Soundhax](http://soundhax.com/) *(adatta alla tua console e alla tua regione)* +* L'ultima versione di [Soundhax](http://soundhax.com/) *(adatta alla regione, tipo e versione della console)* * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(il file `.7z`)* diff --git a/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt b/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ja_JP/get-started-(old-3ds).txt b/_pages/ja_JP/get-started-(old-3ds).txt index a42bd0de5e..de5244e290 100644 --- a/_pages/ja_JP/get-started-(old-3ds).txt +++ b/_pages/ja_JP/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/ja_JP/homebrew-launcher-(soundhax).txt b/_pages/ja_JP/homebrew-launcher-(soundhax).txt index a6867cb215..ed593b500c 100644 --- a/_pages/ja_JP/homebrew-launcher-(soundhax).txt +++ b/_pages/ja_JP/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcherには、さまざまなエントリーポイントや起動方法があります。 -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt index 0db32fe5ca..f6e792a7be 100644 --- a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt +++ b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. パソコンにSDカードを入れます + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/ja_JP/installing-boot9strap-(soundhax).txt b/_pages/ja_JP/installing-boot9strap-(soundhax).txt index 06c6912c11..ce68a1d32c 100644 --- a/_pages/ja_JP/installing-boot9strap-(soundhax).txt +++ b/_pages/ja_JP/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. EmuNANDとRedNANDは[同じ理論](http://3dbrew.org/wiki/NAND_Redirection)の少々違う実装です。 -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt b/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt index 6f57bcb9c1..4cf3472808 100644 --- a/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ko_KR/get-started-(old-3ds).txt b/_pages/ko_KR/get-started-(old-3ds).txt index c9357a704d..c7ee27fd64 100644 --- a/_pages/ko_KR/get-started-(old-3ds).txt +++ b/_pages/ko_KR/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ For all versions you can also [Cartridge Update](cart-update) (or use a standard 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/ko_KR/homebrew-launcher-(soundhax).txt b/_pages/ko_KR/homebrew-launcher-(soundhax).txt index 049052004d..b7508a8aea 100644 --- a/_pages/ko_KR/homebrew-launcher-(soundhax).txt +++ b/_pages/ko_KR/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" 홈브류 런처는 다양한 방법을 통해 실행할 수 있습니다. -Soundhax는 미국, 유럽, 일본, 한국 지역의 9.0.0~11.3.0 버전에서 사용이 가능합니다. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt index 5132600f23..552543a632 100644 --- a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt +++ b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. SD 카드를 컴퓨터에 삽입해 주세요. + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. SD 카드를 기기에 다시 삽입해 주세요. diff --git a/_pages/ko_KR/installing-boot9strap-(soundhax).txt b/_pages/ko_KR/installing-boot9strap-(soundhax).txt index fbe597af81..fadb9ce00e 100644 --- a/_pages/ko_KR/installing-boot9strap-(soundhax).txt +++ b/_pages/ko_KR/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" 이 설명은 SysNAND를 기준으로 제작되었으므로 기기가 EmuNAND 기반이라면 모든 과정을 SysNAND에 적용해 주세요. EmuNAND와 RedNAND는 [동일한 개념](http://3dbrew.org/wiki/NAND_Redirection)을 다른 방식으로 구현한 것입니다. -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt b/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt index de2e673e14..cdd7e2f3af 100644 --- a/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ms_MY/get-started-(old-3ds).txt b/_pages/ms_MY/get-started-(old-3ds).txt index 59bf2ba202..f5cb30c64f 100644 --- a/_pages/ms_MY/get-started-(old-3ds).txt +++ b/_pages/ms_MY/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/ms_MY/homebrew-launcher-(soundhax).txt b/_pages/ms_MY/homebrew-launcher-(soundhax).txt index 167b19220a..824e1416ca 100644 --- a/_pages/ms_MY/homebrew-launcher-(soundhax).txt +++ b/_pages/ms_MY/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcher mempunyai pelbagai cara masuk, atau cara melancarkannya. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt index 18beea8930..0b066a0382 100644 --- a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt +++ b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Pasang kad SD anda ke dalam komputer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/ms_MY/installing-boot9strap-(soundhax).txt b/_pages/ms_MY/installing-boot9strap-(soundhax).txt index 0483426623..fadb15a3ca 100644 --- a/_pages/ms_MY/installing-boot9strap-(soundhax).txt +++ b/_pages/ms_MY/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Sila ambil perhatian terma EmuNAND dan RedNAND mungkin berbeza sedikit dari cara perlaksanaannya akan tetapi [sama konsepnya](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt b/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt index dfb0835e62..ab1422ade6 100644 --- a/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/nl_NL/get-started-(old-3ds).txt b/_pages/nl_NL/get-started-(old-3ds).txt index 35082287d4..13603f0d93 100644 --- a/_pages/nl_NL/get-started-(old-3ds).txt +++ b/_pages/nl_NL/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de syst 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/nl_NL/homebrew-launcher-(soundhax).txt b/_pages/nl_NL/homebrew-launcher-(soundhax).txt index d4b154ab89..7bcffbafe4 100644 --- a/_pages/nl_NL/homebrew-launcher-(soundhax).txt +++ b/_pages/nl_NL/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" De Homebrew Launcher heeft veel verschillende entrypoints (ingangspunten) of lanceringsmethoden. -Soundhax is compatibel met firmwareversies 9.0.0 tot en met 11.3.0 in regio's EUR, JPN, KOR en USA. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt index 50c2534a01..cb0e6c2594 100644 --- a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt +++ b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Plaats je SD kaart in je computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Stop je SD kaart terug in je 3DS diff --git a/_pages/nl_NL/installing-boot9strap-(soundhax).txt b/_pages/nl_NL/installing-boot9strap-(soundhax).txt index efbaf8f574..61acdc1f27 100644 --- a/_pages/nl_NL/installing-boot9strap-(soundhax).txt +++ b/_pages/nl_NL/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" Als je je 3DS al eens eerder gehacked hebt met een op EmuNAND-gebaseerde CFW setup, deze handleiding zal zich alleen maar met sysNAND zich bezig houden, dus moet je alle instructies volgen vanuit of toepassend op SysNAND. Merk op dat de termen EmuNAND en RedNAND naar iets andere implementaties van [hetzelfde concept verwijzen](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt b/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt index 4e9c63dc60..62cecce267 100644 --- a/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/no_NO/get-started-(old-3ds).txt b/_pages/no_NO/get-started-(old-3ds).txt index 4f90d87bbf..6d340b6955 100644 --- a/_pages/no_NO/get-started-(old-3ds).txt +++ b/_pages/no_NO/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/no_NO/homebrew-launcher-(soundhax).txt b/_pages/no_NO/homebrew-launcher-(soundhax).txt index d45fda7090..14b6b85ffd 100644 --- a/_pages/no_NO/homebrew-launcher-(soundhax).txt +++ b/_pages/no_NO/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcher har flere forskjellige inngangspunkt eller metoder for å starte. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/no_NO/installing-boot9strap-(ntrboot).txt b/_pages/no_NO/installing-boot9strap-(ntrboot).txt index e404d494a7..aec96dbd13 100644 --- a/_pages/no_NO/installing-boot9strap-(ntrboot).txt +++ b/_pages/no_NO/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Sett inn SD-kortet i datamaskinen din + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Sett inn SD-kortet i konsollen igjen diff --git a/_pages/no_NO/installing-boot9strap-(soundhax).txt b/_pages/no_NO/installing-boot9strap-(soundhax).txt index 1e58be7bd0..5261bc387d 100644 --- a/_pages/no_NO/installing-boot9strap-(soundhax).txt +++ b/_pages/no_NO/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt b/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt index 054f6396f1..4d5a5b9185 100644 --- a/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/pl_PL/get-started-(old-3ds).txt b/_pages/pl_PL/get-started-(old-3ds).txt index be04ff1df5..f9f8532d6a 100644 --- a/_pages/pl_PL/get-started-(old-3ds).txt +++ b/_pages/pl_PL/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/pl_PL/homebrew-launcher-(soundhax).txt b/_pages/pl_PL/homebrew-launcher-(soundhax).txt index 0b940a7771..0f3357f564 100644 --- a/_pages/pl_PL/homebrew-launcher-(soundhax).txt +++ b/_pages/pl_PL/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcher ma wiele punktów wejścia - sposobów na jego uruchomienie. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt index e985b4bc06..22815885f8 100644 --- a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt +++ b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Włóż kartę SD do komputera + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/pl_PL/installing-boot9strap-(soundhax).txt b/_pages/pl_PL/installing-boot9strap-(soundhax).txt index 4239241b22..83db2c4823 100644 --- a/_pages/pl_PL/installing-boot9strap-(soundhax).txt +++ b/_pages/pl_PL/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Zauważ, że terminy EmuNand i RedNAND odnoszą się do nieco innych implementacji [tej samej idei] (http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt index e449cd60f9..909e85916c 100644 --- a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Antes de prosseguir, certifique-se de que você tenha lido todas as informações em [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note que em algumas raras circunstâncias, pode ser possível que o processo de instalação cause um **brick** em um flashcart falso e torne-o permanentemente inutilizável. É pouco provável que isso ocorra, mas mesmo assim somente os flashcarts originais listados são suportados. Para reduzir a chance de receber um flashcart falso, é recomendado que você use um site com uma boa reputação para comprar o seu flashcart, (como o [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/pt_BR/get-started-(old-3ds).txt b/_pages/pt_BR/get-started-(old-3ds).txt index 8275feccc7..bad9c8dde3 100644 --- a/_pages/pt_BR/get-started-(old-3ds).txt +++ b/_pages/pt_BR/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ A versão do seu dispositivo pode ser encontrada no canto inferior direito da te 4.0.0 - 4.5.0 - Instalando boot9strap (MSET) - Instalando boot9strap (Navegador) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/pt_BR/homebrew-launcher-(soundhax).txt b/_pages/pt_BR/homebrew-launcher-(soundhax).txt index 20f498f830..9269413cee 100644 --- a/_pages/pt_BR/homebrew-launcher-(soundhax).txt +++ b/_pages/pt_BR/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" O Homebrew Launcher possui vários pontos de entrada diferentes, ou métodos de execução. -Soundhax é compatível com as versões de 9.0.0 a 11.3.0 nas regiões EUA, EUR, JPN, KOR. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt index 61d1611d0d..29c3c723f2 100644 --- a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt +++ b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insira o cartão SD no seu computador + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Crie uma pasta chamada `ntrboot` na raiz do seu cartão SD -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsira seu cartão SD no seu dispositivo diff --git a/_pages/pt_BR/installing-boot9strap-(soundhax).txt b/_pages/pt_BR/installing-boot9strap-(soundhax).txt index 5c545b616b..90b44f5119 100644 --- a/_pages/pt_BR/installing-boot9strap-(soundhax).txt +++ b/_pages/pt_BR/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" Se você já fez um hack no seu dispositivo antes e tem um CFW baseado em EmuNAND, esse guia lida exclusivamente com a SysNAND, e você deve seguir todas as instruções a partir da ou aplicando para a SysNAND. Note que os termos EmuNAND e RedNAND se referem a implementações ligeiramente diferentes do [mesmo conceito](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt index d5e2c364a2..77c8746933 100644 --- a/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/pt_PT/get-started-(old-3ds).txt b/_pages/pt_PT/get-started-(old-3ds).txt index c6be5d28e8..7cedbcb6c2 100644 --- a/_pages/pt_PT/get-started-(old-3ds).txt +++ b/_pages/pt_PT/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/pt_PT/homebrew-launcher-(soundhax).txt b/_pages/pt_PT/homebrew-launcher-(soundhax).txt index d1310a342b..ed3e572999 100644 --- a/_pages/pt_PT/homebrew-launcher-(soundhax).txt +++ b/_pages/pt_PT/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Há muitas maneiras e pontos de entrada (entrypoints) para acederes ao Homebrew Launcher. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt index 2277812ac1..804087b703 100644 --- a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt +++ b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/pt_PT/installing-boot9strap-(soundhax).txt b/_pages/pt_PT/installing-boot9strap-(soundhax).txt index 5abb386f34..aefb4cddeb 100644 --- a/_pages/pt_PT/installing-boot9strap-(soundhax).txt +++ b/_pages/pt_PT/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt b/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt index 4853386ac4..55d1f01033 100644 --- a/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Instalând ntrboot (Un 3DS)" Înainte de a continua, asigurați-vă că ați citit toate informațiile de pe [ntrboot](ntrboot) -Această metodă necesită nimic mai mult decât un 3DS stoc nemodat şi un flashcart compatibil. Această metodă folosește flashcart-ul pentru a rula fişierul ntrboot flasher `.nds` pe 3DS-ul dumneavoastră. Asta înseamnă că flashcart-ul trebuie să poată porni fişiere `.nds` pe versiunea 3DS-ului dumneavoastră. Vedeți tabelul de flashcart-uri pentru mai multe informații. Vedeți tabelul pe [ntrboot](ntrboot) pentru mai multe informații. +Această metodă necesită nimic mai mult decât un 3DS stoc nemodat şi un flashcart compatibil. Această metodă folosește flashcart-ul pentru a rula fişierul ntrboot flasher `.nds` pe 3DS-ul dumneavoastră. Asta înseamnă că flashcart-ul trebuie să poată porni fişiere `.nds` pe versiunea 3DS-ului dumneavoastră. Vedeți tabelul pe [ntrboot](ntrboot) pentru mai multe informații. Țineți cont că în anumite cazuri rare, poate fi posibil ca procesul de instalare să facă **brick** unui flashcard contrafăcut și să devină complet nefolositor. Acest lucru este puţin probabil, totuși, numai flashcart-urile originale menționate sunt compatibile. Pentru a reduce şansa de a primi un card contrafăcut, este recomandat să folosiți un site de încredere pentru a cumpăra flashcart-ul (cum ar fi [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ro_RO/get-started-(old-3ds).txt b/_pages/ro_RO/get-started-(old-3ds).txt index 82a010d205..31ea0330d5 100644 --- a/_pages/ro_RO/get-started-(old-3ds).txt +++ b/_pages/ro_RO/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului 4.0.0 - 4.5.0 - Instalând boot9strap (MSET) - Instalând boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/ro_RO/homebrew-launcher-(soundhax).txt b/_pages/ro_RO/homebrew-launcher-(soundhax).txt index 6e0ea36c3e..cb4e00813d 100644 --- a/_pages/ro_RO/homebrew-launcher-(soundhax).txt +++ b/_pages/ro_RO/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcher-ul are multe puncte de intrare sau metode de a fi accesat. -Soundhax este compatibil cu versiunile 9.0.0 până la 11.3.0 în regiunile EUR, JPN, KOR și USA. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Asigurați-vă că dispozitivul are pornit comunicarea fără fir pentru că udsploit (folosit în pagina următoare) va avea nevoie de modulul fără fir să fie activ ca să funcționeze, și unele dispozitive (New 3DS, New 2DS și Old 2DS) nu pot ajusta comunicarea fără fir din Homebrew Launcher. Comunicarea fără fir trebuie doar să fie pornită; nu este necesar să conectați consola la un punct de rețea. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### Ce aveți nevoie * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* Ultima versiune de [Soundhax](http://soundhax.com/) *(pentru dispozitivul și regiunea dumneavoastră)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * Cea mai recentă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* * Cea mai recentă versiune de [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(fișierul `.3dsx`)* * Cea mai recentă versiune de [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * Cea mai nouă versiune de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(fișierul `.7z`)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instrucțiuni diff --git a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt index 1c975ba852..3950b8e4ec 100644 --- a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt +++ b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Nu urmați această secțiune până când ați completat restul instrucțiunilo 1. Introduceți cardul SD în calculator + Acesta este cardul SD de pe 3DS-ul dumneavoastră, *nu* cardul SD de pe flashcart 1. Creați un folder numit `ntrboot` pe rădăcina cardului SD -1. Copiați `backup.bin` din arhiva `.zip` de copie de rezervă flashrom în folderul `/ntrboot/` de pe rădăcina cardului SD +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Creați un folder numit `payloads` în folderul `luma` de pe cardul SD 1. Copiați `ntrboot_flasher.firm` în folderul `/luma/payloads/` de pe cardul SD 1. Reintroduceți cardul SD în dispozitivul dumneavoastră diff --git a/_pages/ro_RO/installing-boot9strap-(soundhax).txt b/_pages/ro_RO/installing-boot9strap-(soundhax).txt index c699da0054..b6a6ccf2b9 100644 --- a/_pages/ro_RO/installing-boot9strap-(soundhax).txt +++ b/_pages/ro_RO/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" Dacă v-ați modat deja 3DS-ul înainte și aveți o configurare cu CFW bazat pe EmuNAND, acest ghid acoperă exclusiv SysNAND-ul și ar trebui să urmați toate instrucțiunile din SysNAND. Țineți cont că termenii EmuNAND și RedNAND se referă la implementări puțin diferite ale [aceluiași concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. Pentru a extrage fişierele `.7z` de pe această pagină, veţi avea nevoie de un arhivator de fişiere ca [7-Zip](http://www.7-zip.org/) sau [The Unarchiver] (https://theunarchiver.com/). @@ -23,7 +23,7 @@ Asta înseamnă că folosind o actualizare cu cardulde joc de la o versiune care ### Ce aveți nevoie -* Ultima versiune de [Soundhax](http://soundhax.com/) *(pentru dispozitivul și regiunea dumneavoastră)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * Cea mai recentă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* * Cea mai nouă versiune de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(fișierul `.7z`)* diff --git a/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt b/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt index 2b5db3b817..fa408a62a3 100644 --- a/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Прошивка ntrboot (Одна консоль 3DS)" Прежде чем продолжить, убедитесь что вы прочитали всю информацию на странице [ntrboot](ntrboot) -Этот метод не требует ничего кроме одной не прошитой консоли 3DS и совместимого флешкартриджа. Для запуска `.nds-файла` флешера ntrboot на вашей 3DS в этом методе используется флешкартридж. Ваш флешкартридж должен быть способен запускать `.nds-файлы` на вашей 3DS. Смотрите таблицу флешкартриджей для получения дополнительной информации. Смотрите таблицу флешкартриджей на странице [ntrboot](ntrboot) для получения дополнительной информации. +Этот метод не требует ничего кроме одной не прошитой консоли 3DS и совместимого флешкартриджа. Для запуска `.nds-файла` флешера ntrboot на вашей 3DS в этом методе используется флешкартридж. Ваш флешкартридж должен быть способен запускать `.nds-файлы` на вашей 3DS. Смотрите таблицу флешкартриджей на странице [ntrboot](ntrboot) для получения дополнительной информации. Обратите внимание, что в некоторых редких случаях процесс прошивки может **брикнуть** поддельный флешкартридж и навсегда сделать его нерабочим. Это маловероятно, но тем не менее поддерживаются только оригинальные флешкартриджи из списка. Чтобы уменьшить вероятность получения поддельного картриджа, рекомендуется использовать проверенный сайт для покупки флешкартриджа (например [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/ru_RU/get-started-(old-3ds).txt b/_pages/ru_RU/get-started-(old-3ds).txt index 7458838816..d9976ad54e 100644 --- a/_pages/ru_RU/get-started-(old-3ds).txt +++ b/_pages/ru_RU/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ title: "Начало (Old 3DS)" 4.0.0 - 4.5.0 - Установка boot9strap (MSET) - Установка boot9strap (Браузер) - - - 5.0.0 8.1.0 Установка boot9strap (Soundhax) diff --git a/_pages/ru_RU/homebrew-launcher-(soundhax).txt b/_pages/ru_RU/homebrew-launcher-(soundhax).txt index 9ba1136b4c..8b8f81a400 100644 --- a/_pages/ru_RU/homebrew-launcher-(soundhax).txt +++ b/_pages/ru_RU/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcher имеет множество точек входа, или методов запуска. -Soundhax совместим с версиями прошивки от 9.0.0 до 11.3.0 в регионах EUR, JPN, KOR и USA. +Soundhax (в сочетании с Homebrew Launcher) совместим с версиями прошивки от 9.0.0 до 11.3.0 в регионах EUR, JPN, KOR и USA. Убедитесь, что Беспроводной режим (Wireless Communication) включен, так как udsploit (используется на следующей странице) потребует активный беспроводной модуль для своей работы, и некоторые консоли (New 3DS, New 2DS и Old 2DS) не могут включить Беспроводной режим, находясь в Homebrew Launcher. Достаточно включить Беспроводной режим (Wireless Communication); наличие соединения с точкой доступа не обязательно. @@ -26,13 +26,13 @@ Soundhax совместим с версиями прошивки от 9.0.0 до ### Что понадобится * Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* Свежая версия [Soundhax](http://soundhax.com/) *(для вашего устройства и региона)* +* Свежая версия [Soundhax](http://soundhax.com/) *(для вашего региона, консоли и версии прошивки)* * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(стандартный boot9strap; не `devkit` файл, не `ntr` файл)* * Свежая версия [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(`.3dsx` файл)* * Свежая версия [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(`.7z` архив)* -* [Otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(для вашей версии и региона)* +* [Otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(для вашего региона и версии прошивки)* ### Инструкция diff --git a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt index e14891ccc6..10a087cfa6 100644 --- a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt +++ b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ ___ 1. Вставьте SD-карту в компьютер + Это должна быть SD-карта вашей 3DS, *не* SD-карта вашего флешкартриджа 1. Создайте папку `ntrboot` в корне SD-карты -1. Скопируйте `backup.bin` из `.zip-архива` с резервной копией прошивки вашего картриджа в папку `/ntrboot/` в корне SD-карты +1. Скопируйте `.bin` файл из `.zip-архива` с резервной копией прошивки вашего картриджа в папку `/ntrboot/` в корне SD-карты 1. Создайте папку `payloads` внутри папки `luma` на SD-карте 1. Скопируйте `ntrboot_flasher.firm` в папку `/luma/payloads/` на SD-карте 1. Вставьте SD-карту обратно в консоль diff --git a/_pages/ru_RU/installing-boot9strap-(soundhax).txt b/_pages/ru_RU/installing-boot9strap-(soundhax).txt index 29ac5b3791..9e6b9105cb 100644 --- a/_pages/ru_RU/installing-boot9strap-(soundhax).txt +++ b/_pages/ru_RU/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Установка boot9strap (Soundhax)" Если вы взламывали ваше устройство ранее и у вас установлена кастомная прошивка на основе EmuNAND, помните, что данное руководство работает только с SysNAND и вы должны выполнять вся шаги находясь в SysNAND. Помните, что RedNAND и EmuNAND - немного разные реализации [одного и того же](http://3dbrew.org/wiki/NAND_Redirection) (англ.). -Soundhax (в сочетании с pre9otherapp) совместим с версиями прошивки от 5.0.0 до 8.1.0 в регионах EUR, JPN, KOR и USA. +Soundhax (в сочетании с pre9otherapp) совместим с версиями прошивки от 4.0.0 до 8.1.0 в регионах EUR, JPN, KOR и USA. Чтобы распаковать архивы `.7z`, присутствующие на этой странице, вам понадобится архиватор [7-Zip](http://www.7-zip.org/) или [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ Soundhax (в сочетании с pre9otherapp) совместим с верс ### Что понадобится -* Свежая версия [Soundhax](http://soundhax.com/) *(для вашего устройства и региона)* +* Свежая версия [Soundhax](http://soundhax.com/) *(для вашего региона, консоли и версии прошивки)* * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(стандартный boot9strap; не `devkit` файл, не `ntr` файл)* * Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(`.7z` архив)* diff --git a/_pages/sr_SP/flashing-ntrboot-(3ds-single-system).txt b/_pages/sr_SP/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/sr_SP/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/sr_SP/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/sr_SP/get-started-(old-3ds).txt b/_pages/sr_SP/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/sr_SP/get-started-(old-3ds).txt +++ b/_pages/sr_SP/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/sr_SP/homebrew-launcher-(soundhax).txt b/_pages/sr_SP/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/sr_SP/homebrew-launcher-(soundhax).txt +++ b/_pages/sr_SP/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/sr_SP/installing-boot9strap-(ntrboot).txt b/_pages/sr_SP/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/sr_SP/installing-boot9strap-(ntrboot).txt +++ b/_pages/sr_SP/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/sr_SP/installing-boot9strap-(soundhax).txt b/_pages/sr_SP/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/sr_SP/installing-boot9strap-(soundhax).txt +++ b/_pages/sr_SP/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/sv_SE/a9lh-to-b9s.txt b/_pages/sv_SE/a9lh-to-b9s.txt index dd041c99ec..09a0c15750 100644 --- a/_pages/sv_SE/a9lh-to-b9s.txt +++ b/_pages/sv_SE/a9lh-to-b9s.txt @@ -123,7 +123,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS -1. Starta GodMode9 genom att hålla (Start) under uppstart +1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide diff --git a/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt b/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt index 5bb6ad6bdd..982f47cd81 100644 --- a/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/sv_SE/get-started-(old-3ds).txt b/_pages/sv_SE/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/sv_SE/get-started-(old-3ds).txt +++ b/_pages/sv_SE/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/sv_SE/homebrew-launcher-(soundhax).txt b/_pages/sv_SE/homebrew-launcher-(soundhax).txt index 5e78a282db..7a0e11ec42 100644 --- a/_pages/sv_SE/homebrew-launcher-(soundhax).txt +++ b/_pages/sv_SE/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt index c955cda83f..2049f61ba7 100644 --- a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt +++ b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Sätt tillbaka ditt SD-kort i din enhet diff --git a/_pages/sv_SE/installing-boot9strap-(soundhax).txt b/_pages/sv_SE/installing-boot9strap-(soundhax).txt index f805a92af4..8226e05f74 100644 --- a/_pages/sv_SE/installing-boot9strap-(soundhax).txt +++ b/_pages/sv_SE/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt b/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/th_TH/get-started-(old-3ds).txt b/_pages/th_TH/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/th_TH/get-started-(old-3ds).txt +++ b/_pages/th_TH/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/th_TH/homebrew-launcher-(soundhax).txt b/_pages/th_TH/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/th_TH/homebrew-launcher-(soundhax).txt +++ b/_pages/th_TH/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/th_TH/installing-boot9strap-(ntrboot).txt b/_pages/th_TH/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/th_TH/installing-boot9strap-(ntrboot).txt +++ b/_pages/th_TH/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/th_TH/installing-boot9strap-(soundhax).txt b/_pages/th_TH/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/th_TH/installing-boot9strap-(soundhax).txt +++ b/_pages/th_TH/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt b/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt index cdcc82a565..bb8946783a 100644 --- a/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/tr_TR/get-started-(old-3ds).txt b/_pages/tr_TR/get-started-(old-3ds).txt index c94af0f56d..1ca1dae97b 100644 --- a/_pages/tr_TR/get-started-(old-3ds).txt +++ b/_pages/tr_TR/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında gör 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/tr_TR/homebrew-launcher-(soundhax).txt b/_pages/tr_TR/homebrew-launcher-(soundhax).txt index 5c9e073ed4..04ed99c4b1 100644 --- a/_pages/tr_TR/homebrew-launcher-(soundhax).txt +++ b/_pages/tr_TR/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcher'ın çok sayıda giriş noktası veya başlatma yöntemi vardır. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt index 255fa5a057..49a899a543 100644 --- a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt +++ b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. SD kartınızı bilgisayarınıza takın + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. SD kartınızı cihazınıza tekrar takın diff --git a/_pages/tr_TR/installing-boot9strap-(soundhax).txt b/_pages/tr_TR/installing-boot9strap-(soundhax).txt index 84d2cccdec..f731e76fc7 100644 --- a/_pages/tr_TR/installing-boot9strap-(soundhax).txt +++ b/_pages/tr_TR/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. EmuNAND ve RedNAND terimlerinin, birbirinden farklı uygulamalara işaret ettiğini unutmayın.[aynı konsept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt b/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/uk_UA/get-started-(old-3ds).txt b/_pages/uk_UA/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/uk_UA/get-started-(old-3ds).txt +++ b/_pages/uk_UA/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/uk_UA/homebrew-launcher-(soundhax).txt b/_pages/uk_UA/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/uk_UA/homebrew-launcher-(soundhax).txt +++ b/_pages/uk_UA/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt +++ b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/uk_UA/installing-boot9strap-(soundhax).txt b/_pages/uk_UA/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/uk_UA/installing-boot9strap-(soundhax).txt +++ b/_pages/uk_UA/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt b/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt index 9eacdc1f45..e57fc003d3 100644 --- a/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/vi_VN/get-started-(old-3ds).txt b/_pages/vi_VN/get-started-(old-3ds).txt index de4397c559..af1cc436f9 100644 --- a/_pages/vi_VN/get-started-(old-3ds).txt +++ b/_pages/vi_VN/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/vi_VN/homebrew-launcher-(soundhax).txt b/_pages/vi_VN/homebrew-launcher-(soundhax).txt index cc997fcee0..1bab5678c7 100644 --- a/_pages/vi_VN/homebrew-launcher-(soundhax).txt +++ b/_pages/vi_VN/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" The Homebrew Launcher has many different entrypoints, or methods of launching. -Soundhax is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### Instructions diff --git a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt index fd97dbeac1..2ff15c1686 100644 --- a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt +++ b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. Insert your SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/vi_VN/installing-boot9strap-(soundhax).txt b/_pages/vi_VN/installing-boot9strap-(soundhax).txt index 67a1c37bc0..4703f91c02 100644 --- a/_pages/vi_VN/installing-boot9strap-(soundhax).txt +++ b/_pages/vi_VN/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt index 055a5193dc..6e6bab7a25 100644 --- a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "Flashing ntrboot (3DS Single System)" Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart chart for more information. See the flashcart table on [ntrboot](ntrboot) for more information. +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) {: .notice--danger} diff --git a/_pages/zh_CN/get-started-(old-3ds).txt b/_pages/zh_CN/get-started-(old-3ds).txt index 83929b99e9..23a9819297 100644 --- a/_pages/zh_CN/get-started-(old-3ds).txt +++ b/_pages/zh_CN/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ Your device version can be found at the bottom right of the top screen of the Sy 4.0.0 - 4.5.0 - Installing boot9strap (MSET) - Installing boot9strap (Browser) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/zh_CN/homebrew-launcher-(soundhax).txt b/_pages/zh_CN/homebrew-launcher-(soundhax).txt index 8c961b245e..217214d8ed 100644 --- a/_pages/zh_CN/homebrew-launcher-(soundhax).txt +++ b/_pages/zh_CN/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (Soundhax)" Homebrew Launcher (HBL) 有许多不同的入口和启动方式。 -声音破解兼容从9.0.0到11.3.0的欧版、日版、韩版、和美版系统。 +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### 操作步骤 diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt index 31ef09bafc..c73c7adfcc 100644 --- a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ Do not follow this section until you have completed the rest of the instructions 1. 将你的 SD 卡插入到您的计算机 + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `backup.bin` from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card 1. Reinsert your SD card into your device diff --git a/_pages/zh_CN/installing-boot9strap-(soundhax).txt b/_pages/zh_CN/installing-boot9strap-(soundhax).txt index 7a56f4d08f..67fccc7f2e 100644 --- a/_pages/zh_CN/installing-boot9strap-(soundhax).txt +++ b/_pages/zh_CN/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" 如果你的3DS之前已经破解并安装了基于虚拟系统（EnuNAND）的自制系统（CFW），请务必注意本教程仅适用于真实系统（SysNAND），并且教程内的所有步骤都应当在你的真实系统（SysNAND）上进行。 注意EmuNAND和RedNAND是[同一概念](http://3dbrew.org/wiki/NAND_Redirection)的两种略微不同的实现。 -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). @@ -23,7 +23,7 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need -* The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(the `.7z` file)* diff --git a/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt index 0ab17611f2..9ba37cee16 100644 --- a/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt @@ -8,7 +8,7 @@ title: "寫入 ntrboot 漏洞 (透過單台 3DS 系統)" 在開始前，請先確保您已閱讀完 [ntrboot](ntrboot) 頁面。 -本方法僅需一台原廠 3DS 系列系統以及一張相容的燒錄卡。 本方法將透過燒錄卡於您的 3DS 中運行 ntrboot 寫入程式之 `.nds` 檔。 也就是說，您的燒錄卡必須能在您的 3DS 系統版本中運行 `.nds` 檔案。 詳情請見燒錄卡表格。 詳情請見 [ntrboot](ntrboot) 頁面中的燒錄卡表格。 +本方法僅需一台原廠 3DS 系列系統以及一張相容的燒錄卡。 本方法將透過燒錄卡於您的 3DS 中運行 ntrboot 寫入程式之 `.nds` 檔。 也就是說，您的燒錄卡必須能在您的 3DS 系統版本中運行 `.nds` 檔案。 詳情請見 [ntrboot](ntrboot) 頁面中的燒錄卡表格。 請注意，在某些特殊情況下，某些冒牌的燒錄卡很有可能會在過程中變磚，使得燒錄卡變得無法使用。 這是不大可能的，但不論如何，我們只支援寫在相容清單中的燒錄卡。 為了避免您採購燒錄卡時買到了冒牌卡帶，建議您應於較知名且放心的網站上購買您的燒錄卡(如 [NDS Card](http://www.nds-card.com/))。 {: .notice--danger} diff --git a/_pages/zh_TW/get-started-(old-3ds).txt b/_pages/zh_TW/get-started-(old-3ds).txt index 272702307a..792085f213 100644 --- a/_pages/zh_TW/get-started-(old-3ds).txt +++ b/_pages/zh_TW/get-started-(old-3ds).txt @@ -56,12 +56,6 @@ title: "新手入門 (舊型 3DS)" 4.0.0 - 4.5.0 - 安裝 boot9strap (透過 MSET) - 安裝 boot9strap (透過網頁瀏覽器) - - - 5.0.0 8.1.0 Installing boot9strap (Soundhax) diff --git a/_pages/zh_TW/homebrew-launcher-(soundhax).txt b/_pages/zh_TW/homebrew-launcher-(soundhax).txt index 0d97f33f44..1b914241ca 100644 --- a/_pages/zh_TW/homebrew-launcher-(soundhax).txt +++ b/_pages/zh_TW/homebrew-launcher-(soundhax).txt @@ -8,7 +8,7 @@ title: "Homebrew Launcher (透過 Soundhax)" Homebrew Launcher 可以透過不同的進入點或方式開啟。 -Soundhax 相容於 9.0.0 至 11.3.0 的歐、日、韓及美區的系統版本。 +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. 請確保您主機的無線通訊功能已經開啟，因為 udsploit (將於下一頁使用) 將需要它才能使用，某些主機 (New 3DS、New 2DS、舊型 2DS) 無法從 Homebrew Launcher 中調整無線通信設置。 另外，您只需要將無線通訊功能開啟即可；不需要連接至任何的無線基地台。 @@ -26,13 +26,13 @@ This means that using a cartridge update from a version containing an older Nint ### 必備項目 * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest){:target="_blank"} -* 最新版的 [Soundhax](http://soundhax.com/) *(選擇對應您主機的區域及型號的檔案)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [safehax](https://github.com/TiniVi/safehax/releases/latest){:target="_blank"} *(`.3dsx` 檔案)* * 最新版的 [udsploit](https://github.com/smealum/udsploit/releases/latest){:target="_blank"} * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(`.7z` 檔案)* -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your version and region)* +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp){:target="_blank"} *(for your region and version)* ### 操作說明 diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt index 12c7bab143..9134ea6a13 100644 --- a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt @@ -125,7 +125,7 @@ ___ 1. 將 SD 卡插入電腦中 + 這指的是 3DS 的 SD 卡，*非*燒錄卡中的 SD 卡 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `ntrboot` -1. 從您的燒錄卡備份 `.zip` 壓縮檔中解壓 `backup.bin` 至 SD 卡中的 `/ntrboot/` 資料夾中 +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. 在 SD 卡的 `luma` 資料夾中建立一個新的資料夾叫做 `payloads` 1. 複製 `ntrboot_flasher.firm` 至 SD 卡中的 `/luma/payloads/` 資料夾中 1. 將 SD 卡插回主機中 diff --git a/_pages/zh_TW/installing-boot9strap-(soundhax).txt b/_pages/zh_TW/installing-boot9strap-(soundhax).txt index 6f78b76cf8..0bacd566c0 100644 --- a/_pages/zh_TW/installing-boot9strap-(soundhax).txt +++ b/_pages/zh_TW/installing-boot9strap-(soundhax).txt @@ -8,7 +8,7 @@ title: "Installing boot9strap (Soundhax)" 如果您先前已改機過，且已安裝基於 EmuNAND 的自製系統－請注意，本教學是專門用來處理 SysNAND 的。您應在閱讀本手冊時在 SysNAND 中操作，或將其套用至 SysNAND 中。 注意 EmuNAND 與 RedNAND 指的是些微不同運作方式但[同樣道理](http://3dbrew.org/wiki/NAND_Redirection)的用語。 -Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (when combined with pre9otherapp) is compatible with versions 4.0.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. 要解壓此頁面中的`.7z`檔案，您將需要一個壓縮檔管理員，如 [7-Zip](http://www.7-zip.org/) 或 [The Unarchiver](https://theunarchiver.com/)。 @@ -23,7 +23,7 @@ Soundhax (when combined with pre9otherapp) is compatible with versions 5.0.0 thr ### 必備項目 -* 最新版的 [Soundhax](http://soundhax.com/) *(選擇對應您主機的區域及型號的檔案)* +* The latest release of [Soundhax](http://soundhax.com/) *(for your region, device, and version)* * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"} * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest){:target="_blank"} *(`.7z` 檔案)*