Merge branch 'master' into browser_kor

_data/navigation/es_ES.yml

@@ -100,7 +100,7 @@ sidebar_pages:
     title: Homebrew Launcher (Soundhax)
     url: homebrew-launcher-(soundhax)
   - 
-    title: Homebrew Launcher (Alternatives)
+    title: Homebrew Launcher (Alternativas)
     url: homebrew-launcher-(alternatives)
   - 
     title: Homebrew Launcher (Steelhax)
@@ -109,41 +109,41 @@ sidebar_pages:
     title: Homebrew Launcher (PicHaxx)
     url: homebrew-launcher-(pichaxx)
   - 
-    title: NTR and Cubic Ninja
+    title: NTR y Cubic Ninja
     url: ntr-and-cubic-ninja
   - 
-    title: Installing boot9strap (2xrsa)
+    title: Instalar boot9strap (2xrsa)
     url: installing-boot9strap-(2xrsa)
   - 
-    title: Installing boot9strap (Browser)
+    title: Instalar boot9strap (Navegador)
     url: installing-boot9strap-(browser)
   - 
-    title: Installing boot9strap (Hardmod)
+    title: Instalar boot9strap (Hardmod)
     url: installing-boot9strap-(hardmod)
   - 
-    title: Installing boot9strap (SafeB9SInstaller)
+    title: Instalar boot9strap (SafeB9SInstaller)
     url: installing-boot9strap-(safeb9sinstaller)
   - 
-    title: Installing boot9strap (MSET)
+    title: Instalar boot9strap (MSET)
     url: installing-boot9strap-(mset)
   - 
-    title: Installing boot9strap (ntrboot)
+    title: Instalar boot9strap (ntrboot)
     url: installing-boot9strap-(ntrboot)
   - 
-    title: Installing boot9strap (Soundhax)
+    title: Instalar boot9strap (Soundhax)
     url: installing-boot9strap-(soundhax)
   - 
-    title: Installing boot9strap (Frogtool)
+    title: Instalar boot9strap (Frogtool)
     url: installing-boot9strap-(frogtool)
   - 
-    title: Installing boot9strap (Fredtool)
+    title: Instalar boot9strap (Fredtool)
     url: installing-boot9strap-(fredtool)
   - 
-    title: Installing boot9strap (USM)
+    title: Instalar boot9strap (USM)
     url: installing-boot9strap-(usm)
   - 
-    title: Installing boot9strap (HBL-USM)
+    title: Instalar boot9strap (HBL-USM)
     url: installing-boot9strap-(hbl-usm)
   - 
-    title: Finalizing Setup
+    title: Finalizar instalación
     url: finalizing-setup

_data/navigation/fr_FR.yml

@@ -16,7 +16,7 @@ main:
     title: Mise à jour de B9S
     url: updating-b9s
   - 
-    title: Mise à jour vers boot9strap
+    title: A9LH vers B9S
     url: a9lh-to-b9s
   - 
     title: Problèmes et Dépannage
@@ -31,7 +31,7 @@ main:
     title: Index du site
     url: site-navigation
   - 
-    title: Désinstaller CFW
+    title: Désinstallation du CFW
     url: uninstall-cfw
 top:
   - 
@@ -109,41 +109,41 @@ sidebar_pages:
     title: Homebrew Launcher (PicHaxx)
     url: homebrew-launcher-(pichaxx)
   - 
-    title: NTR and Cubic Ninja
+    title: NTR et Cubic Ninja
     url: ntr-and-cubic-ninja
   - 
-    title: Installing boot9strap (2xrsa)
+    title: Installation de boot9strap (2xrsa)
     url: installing-boot9strap-(2xrsa)
   - 
-    title: Installing boot9strap (Browser)
+    title: Installation de boot9strap (Navigateur Internet)
     url: installing-boot9strap-(browser)
   - 
-    title: Installing boot9strap (Hardmod)
+    title: Installation de boot9strap (Hardmod)
     url: installing-boot9strap-(hardmod)
   - 
-    title: Installing boot9strap (SafeB9SInstaller)
+    title: Installation de boot9strap (SafeB9SInstaller)
     url: installing-boot9strap-(safeb9sinstaller)
   - 
-    title: Installing boot9strap (MSET)
+    title: Installation de boot9strap (MSET)
     url: installing-boot9strap-(mset)
   - 
-    title: Installing boot9strap (ntrboot)
+    title: Installation de boot9strap (ntrboot)
     url: installing-boot9strap-(ntrboot)
   - 
-    title: Installing boot9strap (Soundhax)
+    title: Installation de boot9strap (Soundhax)
     url: installing-boot9strap-(soundhax)
   - 
-    title: Installing boot9strap (Frogtool)
+    title: Installation de boot9strap (Frogtool)
     url: installing-boot9strap-(frogtool)
   - 
-    title: Installing boot9strap (Fredtool)
+    title: Installation de boot9strap (Fredtool)
     url: installing-boot9strap-(fredtool)
   - 
-    title: Installing boot9strap (USM)
+    title: Installation de boot9strap (USM)
     url: installing-boot9strap-(usm)
   - 
-    title: Installing boot9strap (HBL-USM)
+    title: Installation de boot9strap (HBL-USM)
     url: installing-boot9strap-(hbl-usm)
   - 
-    title: Finalizing Setup
+    title: Finalisation de l'installation
     url: finalizing-setup

_pages/af_ZA/ctrtransfer.txt

@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and region     
 *(if your device is not from one of these regions, just pick one that matches your device type)*:    

_pages/af_ZA/finalizing-setup.txt

@@ -26,12 +26,11 @@ During this process, we also setup programs such as the following:
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instructions
 
@@ -51,7 +50,6 @@ During this process, we also setup programs such as the following:
 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
 1. Reinsert your SD card into your device
 1. Power on your device
@@ -104,8 +102,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 #### Section VI - CTRNAND Luma3DS
 
 1. Power off your device
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Launch GodMode9 by holding (Start) during boot
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
 1. Press (Home) to bring up the action menu

_pages/af_ZA/godmode9-usage.txt

@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/af_ZA/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/af_ZA/move-emunand.txt

@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 ### What You Need
 
 * An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instructions

_pages/af_ZA/region-changing.txt

@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
   +    <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/af_ZA/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/af_ZA/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/ar_SA/ctrtransfer.txt

@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and region     
 *(if your device is not from one of these regions, just pick one that matches your device type)*:    

_pages/ar_SA/finalizing-setup.txt

@@ -26,12 +26,11 @@ During this process, we also setup programs such as the following:
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instructions
 
@@ -51,7 +50,6 @@ During this process, we also setup programs such as the following:
 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
 1. Reinsert your SD card into your device
 1. Power on your device
@@ -104,8 +102,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 #### Section VI - CTRNAND Luma3DS
 
 1. Power off your device
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Launch GodMode9 by holding (Start) during boot
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
 1. Press (Home) to bring up the action menu

_pages/ar_SA/godmode9-usage.txt

@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/ar_SA/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/ar_SA/move-emunand.txt

@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 ### What You Need
 
 * An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instructions

_pages/ar_SA/region-changing.txt

@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
   +    <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/ar_SA/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/ar_SA/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/ca_ES/ctrtransfer.txt

@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and region     
 *(si la vostra consola no pertany a cap d'aquestes regions, senzillament escolliu-ne una que es correspongui al model del vostre dispositiu)*:    

_pages/ca_ES/finalizing-setup.txt

@@ -26,12 +26,11 @@ During this process, we also setup programs such as the following:
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instructions
 
@@ -51,7 +50,6 @@ During this process, we also setup programs such as the following:
 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
 1. Reinsert your SD card into your device
 1. Power on your device
@@ -104,8 +102,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 #### Section VI - CTRNAND Luma3DS
 
 1. Power off your device
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Launch GodMode9 by holding (Start) during boot
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
 1. Press (Home) to bring up the action menu

_pages/ca_ES/godmode9-usage.txt

@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/ca_ES/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/ca_ES/move-emunand.txt

@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 ### What You Need
 
 * An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instructions

_pages/ca_ES/region-changing.txt

@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
   +    <i class="fa fa-magnet" aria-hidden="true" title="Això és un enllaç magnet. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/ca_ES/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/ca_ES/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/cs_CZ/ctrtransfer.txt

@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and region     
 *(if your device is not from one of these regions, just pick one that matches your device type)*:    

_pages/cs_CZ/finalizing-setup.txt

@@ -26,12 +26,11 @@ During this process, we also setup programs such as the following:
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instructions
 
@@ -51,7 +50,6 @@ During this process, we also setup programs such as the following:
 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
 1. Reinsert your SD card into your device
 1. Power on your device
@@ -104,8 +102,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 #### Section VI - CTRNAND Luma3DS
 
 1. Power off your device
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Launch GodMode9 by holding (Start) during boot
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
 1. Press (Home) to bring up the action menu

_pages/cs_CZ/godmode9-usage.txt

@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/cs_CZ/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/cs_CZ/move-emunand.txt

@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 ### What You Need
 
 * An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instructions

_pages/cs_CZ/region-changing.txt

@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
   +    <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/cs_CZ/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/cs_CZ/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/da_DK/ctrtransfer.txt

@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and region     
 *(if your device is not from one of these regions, just pick one that matches your device type)*:    

_pages/da_DK/finalizing-setup.txt

@@ -26,12 +26,11 @@ During this process, we also setup programs such as the following:
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instructions
 
@@ -51,7 +50,6 @@ During this process, we also setup programs such as the following:
 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
 1. Reinsert your SD card into your device
 1. Power on your device
@@ -104,8 +102,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 #### Section VI - CTRNAND Luma3DS
 
 1. Power off your device
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Launch GodMode9 by holding (Start) during boot
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
 1. Press (Home) to bring up the action menu

_pages/da_DK/godmode9-usage.txt

@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/da_DK/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/da_DK/move-emunand.txt

@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 ### What You Need
 
 * An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instructions

_pages/da_DK/region-changing.txt

@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
   +    <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/da_DK/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/da_DK/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/de_DE/ctrtransfer.txt

@@ -17,7 +17,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9strap haben um d
 
 ### Was du brauchst
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * Das 11.5.0 CTRTransfer-Image für deine Konsole und Region     
 *(Wenn dein Gerät nicht aus einer dieser Regionen ist, wähle einfach eine Region aus, die zu deinem Gerät passt)*:    

_pages/de_DE/finalizing-setup.txt

@@ -26,12 +26,11 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Anleitung
 
@@ -51,7 +50,6 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
 1. Kopiere `Checkpoint.cia` in den `/cias/` Ordner auf deiner SD-Karte
 1. Erstelle einen Ordner mit dem Namen `payloads` im Ordner`luma` deiner SD-Karte, falls er noch nicht existiert
 1. Kopiere `Godmode9.firm` von der Godmode9 `.zip` nach `/luma/payloads/` auf deiner SD Karte
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Kopiere den Ordner `gm9` aus der GodMode9 `.zip`in das Stammverzeichnis deiner SD-Karte
 1. Stecke deine SD-Karte wieder in dein Gerät
 1. Schalte deine Konsole an
@@ -104,8 +102,7 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in
 #### Schritt VI - CTRNAND Luma3DS
 
 1. Schalte deinen 3DS aus
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Starte GodMode9, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. Wenn du aufgefordert wirst, ein "essential files backup" durchzuführen, drücke (A). Drücke erneut (A) nachdem es abgeschlossen ist
 1. Wenn du aufgefordert wirst Datum und Uhrzeit der "RTC" (Real Time Clock, Echtzeituhr) zu korrigieren, drücke (A), stelle Datum und Uhrzeit ein und drücke (A) um fortzufahren
 1. Drücke  (HOME) um das Aktionsmenü aufzurufen

_pages/de_DE/godmode9-usage.txt

@@ -22,7 +22,7 @@ Einige der folgenden Anweisungen sind nur in der neuesten Version von GodMode9 z
 
 ### Was du brauchst
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Anleitung
 

_pages/de_DE/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Schritt I - Vorbereitungen
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/de_DE/move-emunand.txt

@@ -16,7 +16,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9strap haben um d
 ### Was du brauchst
 
 * Einen bestehenden EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Anleitung

_pages/de_DE/region-changing.txt

@@ -29,7 +29,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um
 
 ### Was du brauchst
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 11.5.0 CTRTransfer Abbild von einer Region deiner Wahl, welcher gleichzeitig deine geänderte Region sein soll:
   +    <i class="fa fa-magnet" aria-hidden="true" title="Dies ist ein Magnetlink. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/de_DE/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/de_DE/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma
 
 ### Was du brauchst
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Anleitung
 

_pages/el_GR/ctrtransfer.txt

@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and region     
 *(εάν η συσκευή σας δεν ανήκει σε κάποια από τις παρακάτω περιοχές, απλά επιλέξτε ένα που ταιριάζει με τον τύπο της συσκευής σας)*:    

_pages/el_GR/finalizing-setup.txt

@@ -26,12 +26,11 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instructions
 
@@ -51,7 +50,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
 1. Reinsert your SD card into your device
 1. Power on your device
@@ -104,8 +102,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 #### Section VI - CTRNAND Luma3DS
 
 1. Power off your device
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Launch GodMode9 by holding (Start) during boot
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
 1. Press (Home) to bring up the action menu

_pages/el_GR/godmode9-usage.txt

@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/el_GR/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/el_GR/move-emunand.txt

@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 ### What You Need
 
 * Μια υπάρχουσα EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instructions

_pages/el_GR/region-changing.txt

@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
   +    <i class="fa fa-magnet" aria-hidden="true" title=": Αυτός είναι ένας σύνδεσμος magnet. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/el_GR/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/el_GR/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/en_PT/ctrtransfer.txt

@@ -17,7 +17,7 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * Th' 11.5.0 CTRTransfer image fer ye device 'n region     
 *(if ye device be not from one 'o these regions, jus' pick one that be matchin' ye device type)*:    

_pages/en_PT/finalizing-setup.txt

@@ -26,12 +26,11 @@ Durin' 'tis process, we also setup programs such as th' followin':
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instructions
 
@@ -51,7 +50,6 @@ Durin' 'tis process, we also setup programs such as th' followin':
 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
 1. Copy `GodMode9.firm` from th' GodMode9 `.zip` to th' `/luma/payloads/` folder on ye SD card
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copy th' `gm9` folder from th' GodMode9 `.zip` to th' root 'o ye SD card
 1. Reinsert ye SD card into ye device
 1. Power on your device
@@ -104,8 +102,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 #### Section VI - CTRNAND Luma3DS
 
 1. Power off ye device
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Launch GodMode9 by holdin' (Start) durin' boot
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. If ye be prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. If ye be prompted to fix th' RTC date&time, press (A) to do so, then set th' date 'n time, then press (A) to continue
 1. Press (Home) to bring up th' action menu

_pages/en_PT/godmode9-usage.txt

@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/en_PT/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/en_PT/move-emunand.txt

@@ -16,7 +16,7 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis.
 ### What You Need
 
 * An existin' EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instructions

_pages/en_PT/region-changing.txt

@@ -29,7 +29,7 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
   +    <i class="fa fa-magnet" aria-hidden="true" title="'Tis be a magnet link. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/en_PT/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/en_PT/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Note that if ye have any payload files other than `GodMode9.firm` in th' `/luma/
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/en_US/home.txt

@@ -82,7 +82,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
 + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
 
 ___

_pages/en_US/homebrew-launcher-(browserhax-2020).txt

@@ -42,8 +42,9 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi
 1. Tap the "PROCEED TO HAXX" button
 1. Wait for the process to complete
   + If it displays a yellow screen, power your console off, then try this section again
+  + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
 1. If the exploit was successful, your device will have loaded the Homebrew Launcher
-  + You may see an error stating that no applications were found. If this occurs, ensure that you have `slotTool.3dsx` in the `3ds` folder
+  + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
 1. Leave your console on and proceed to the next section below
 
 

_pages/en_US/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/en_US/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/en_US/site-navigation.txt

@@ -9,7 +9,7 @@ sitemap: false
 
 + [Finalizing Setup](finalizing-setup)
 + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020))
++ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020))
 + [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
 {% endcapture %}
 <div class="notice--info">{{ notice-1 | markdownify }}</div>

_pages/es_ES/ctrtransfer.txt

@@ -17,7 +17,7 @@ Ya DEBES tener instalado Luma3DS y boot9strap para usar esto.
 
 ### Qué necesitas
 
-* La ultima versión de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versión v1.9.2pre1 de [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * La última versión de [FBI](https://github.com/Steveice10/FBI/releases/latest) *(el archivo `.3dsx`)*
 * La imagen CTRTransfer 11.5.0 para tu consola y región     
 *(si tu consola no corresponde a una de estas regiones, escoge la que corresponda a tu tipo de consola)*:    

_pages/es_ES/finalizing-setup.txt

@@ -26,12 +26,11 @@ Durante este proceso, también instalaremos programas como los siguientes:
 * La última versión de [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(el archivo `.cia`)*
 * La última versión de [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(el archivo `.cia`)*
 * La última versión de [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* La ultima versión de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versión v1.9.2pre1 de [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * La última versión de [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * La última versión de [FBI](https://github.com/Steveice10/FBI/releases/latest) *(los archivos `.cia` y `.3dsx`)*
 * La última versión de [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * La última versión de [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(el archivo `.cia`)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instrucciones
 
@@ -51,7 +50,6 @@ Durante este proceso, también instalaremos programas como los siguientes:
 1. Copia `Checkpoint.cia` a la carpeta `/cias/` en tu tarjeta SD
 1. Crea una carpeta llamada `payloads` dentro de la carpeta `luma` en tu tarjeta SD si aún no existe
 1. Copia el archivo `GodMode9.firm` desde el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copia la carpeta `gm9`contenida en el `.zip`de GodMode9 al directorio raíz de tu tarjeta SD
 1. Vuelve a insertar tu tarjeta SD en tu consola
 1. Enciende tu consola
@@ -104,8 +102,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
 #### Sección VI - CTRNAND Luma3DS
 
 1. Apaga tu consola
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Inicia GodMode9 manteniendo presionado (Start) mientras enciendes la consola
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. Si se te pide crear copias de seguridad de archivos esenciales, presiona (A) para hacerlo y luego presiona (A) para continuar una vez que haya terminado
 1. Si se te pide fijar la fecha y hora RTC, presiona (A) para hacerlo, luego define la fecha y la hora, y después presiona (A) para continuar
 1. Presiona el botón (Home) para abrir el menú de acción

_pages/es_ES/get-started.txt

@@ -29,14 +29,14 @@ Esta página contiene instrucciones para instalar boot9strap en una 3DS o 2DS *s
 {: .notice--warning}
 
 {% capture notice-1 %}
-While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
+Si bien podemos considerar que el Custom Firmware es relativamente seguro hoy por hoy, es importante tener en cuenta que nunca será "a prueba de baneos".
 
-You should avoid the following actions:
+Recomendamos que evites las siguientes acciones:
-1. Piracy
+1. Piratería
-1. Cheating online
+1. Usar trampas en juegos en línea
-1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+1. Movimientos sospechosos en la eShop (tarjetas de crédito rechazadas, por ejemplo)
 
-We believe SpotPass and StreetPass are also safe for use at this time.
+Consideramos que tanto SpotPass y StreetPass también son seguros de utilizar al día de hoy.
 
 {% endcapture %}
 
@@ -54,19 +54,19 @@ We believe SpotPass and StreetPass are also safe for use at this time.
     <tr>
       <th style="text-align: center"> Desde</th>
       <th style="text-align: center">Hasta</th>
-      <th style="text-align: center">Action</th>
+      <th style="text-align: center">Acción</th>
     </tr>
   </thead>
   <tbody>
     <tr>
       <td style="text-align: center; font-weight: bold;">1.0.0</td>
       <td style="text-align: center; font-weight: bold;">2.0.0</td>
-      <td style="text-align: center; font-weight: bold;">Update to latest firmware or use an "All Versions" Method</td>
+      <td style="text-align: center; font-weight: bold;">Actualiza a la ultima versión o utiliza un método para "Todas las versiones"</td>
     </tr>
     <tr>
       <td style="text-align: center; font-weight: bold;">2.1.0</td>
       <td style="text-align: center; font-weight: bold;">8.1.0</td>
-      <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(soundhax)">Installing boot9strap (Soundhax)</a></td>
+      <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(soundhax)">Instalar boot9strap (Soundhax)</a></td>
     </tr>
     <tr>
       <td style="text-align: center; font-weight: bold;">9.0.0</td>
@@ -75,7 +75,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
     </tr><tr>
       <td style="text-align: center; font-weight: bold;">11.4.0</td>
       <td style="text-align: center; font-weight: bold;">11.12.0</td>
-      <td style="text-align: center; font-weight: bold;">Update to latest firmware or use an "All Versions" Method</td>
+      <td style="text-align: center; font-weight: bold;">Actualiza a la ultima versión o utiliza un método para "Todas las versiones"</td>
     </tr>
     <tr>
       <td style="text-align: center; font-weight: bold;">11.13.0</td>
@@ -84,7 +84,7 @@ We believe SpotPass and StreetPass are also safe for use at this time.
     </tr>
     <tr>
       <td style="text-align: center; font-weight: bold;" colspan="2">TODAS LAS VERSIONES<br></td>
-      <td style="text-align: center; font-weight: bold;"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="ntrboot">ntrboot</a><br><sub>(Requires a Compatible Flashcart)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Installing boot9strap (Hardmod)</a><br><sub>(Requires Soldering)</sub></p></td>
+      <td style="text-align: center; font-weight: bold;"><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="ntrboot">ntrboot</a><br><sub>(Requiere un Flashcart Compatible)</sub></p><p style="display: inline-block; margin-top: 1.3em; vertical-align: super; width: 6%">or</p><p style="display: inline-block; margin-top: 1.3em; width: 47%"><a href="installing-boot9strap-(hardmod)">Instalar boot9strap (Hardmod)</a><br><sub>(Requiere soldar)</sub></p></td>
     </tr>
   </tbody>
 </table>

_pages/es_ES/godmode9-usage.txt

@@ -22,7 +22,7 @@ Algunas de las siguientes instrucciones sólo son aplicables a la última versi
 
 ### Qué necesitas
 
-* La ultima versión de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versión v1.9.2pre1 de [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instrucciones
 

_pages/es_ES/home.txt

@@ -81,7 +81,7 @@ Para una lista de cada una de las firmas calculadas de sighax, echa un vistazo a
 + Esta guía servirá para consolas New 3DS, Old, 3DS, New 2DS y Old 2DS de cualquier región, en versión de firmware 11.13.0 o inferior.
 + Si todo va según el plan, no perderás datos y terminarás con todo lo que tenías anteriormente (juegos, NNID, datos de guardado, etc se conservarán).
 + Mantén tu consola conectada y cargada durante todo el proceso para evitar pérdidas de datos o daños, producto de un apagado inesperado!
-+ Tu tarjeta SD debe ser [MBR, no GPT](http://www.howtogeek.com/245610/) (la tarjeta SD que viene con tu consola es MBR por defecto). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ Tu tarjeta SD debe ser [MBR, no GPT](http://www.howtogeek.com/245610/) (la tarjeta SD que viene con tu consola es MBR por defecto). La manera más fácil de comprobar esto es ver si la tarjeta funciona en tu 3DS. Si funciona, la tarjeta es MBR.
 + Si necesitas formatear una tarjeta SD nueva, puedes usar [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) y ajustar el tamaño de unidad de asignación a 32K (32768)).
 + La Old 2DS es esencialmente idéntica a la Old 3DS en términos de software, mientras que la New 2DS es esencialmente idéntica a la New 3DS en términos de software. Cualquier paso que diga "Old 3DS" también aplican a la Old 2DS, y cualquier paso que diga "New 3DS" también aplica a la New 2DS.
 

_pages/es_ES/homebrew-launcher-(browserhax-2020).txt

@@ -6,61 +6,62 @@ title: "Homebrew Launcher (BrowserHax 2020)"
 
 ### Lectura requerida
 
-This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+Este método para acceder al Homebrew Launcher se aprovecha de algunos problemas pasados por alto en el Navegador de Internet nativo de la 3DS.
 
-### Compatibility Testing
+### Pruebas de compatibilidad
 
-To use this method, your console must be from a compatible region with a compatible browser version.
+Para usar este método, tu consola debe ser de una región compatible, y tener una versión compatible del Navegador de Internet.
 
-You can check these details from System Settings.
+Puedes confirmar dichos detalles en Configuración de la Consola.
 
-1. Open System Settings.
+1. Abre Configuración de la Consola.
-1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`.
+1. En la esquina inferior derecha de la pantalla superior, conseguirás la versión del firmware de la consola, en el formato de `11.13.0-45x`.
-  + The 45 is your browser version, and the letter is your region
+  + El 45 es la versión del navegador de Internet, y la letra es la región de tu consola
-  + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option
+  + Si tu versión de Navegador es menor a 45, necesitas actualizar la consola mediante la opción de "Actualización" en Configuración de la consola
-  + E designates EUROPE
+  + E indica la región de Europa
-  + U designates USA
+  + U indica la región Americana (USA)
-  + J designates JAPAN
+  + J indica la región de Japón
-  + If your console has a letter other than any of these three, it is not compatible with this method.
+  + Si tu consola no es de alguna de estas regiones, no es compatible con este método.
-1. Remember your region designation. You will need to know this later.
+1. Recuerda la región de tu consola. La necesitarás para más tarde.
 
 ### Qué necesitas
 
-* La última versión [del Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* La última versión del [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+* La última versión de BrowserHax [[para Old 3DS] (https://github.com/zoogie/old-browserhax/releases/latest) / [para New 3DS] (https://github.com/zoogie/new-browserhax/releases/latest)]
-  + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+  + New/Old se refiere al modelo de tu consola. Si no sabes cuál modelo tienes, consulta [esta imagen]
-* An active WiFi connection on your console
+(https://3ds.eiphax.tech/pic/newold.png)
+* Una conexión WiFi activa en tu consola
 
 ### Instrucciones
 
 #### Sección I - Preparativos
 
-1. Power off your console and remove the SD card
+1. Apaga la consola y retira la tarjeta SD
-1. Connect the SD card to your computer
+1. Inserta la tarjeta SD en tu computadora
-1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+1. Copia `boot.3dsx` del archivo de Homebrew Launcher a la raíz de tu tarjeta SD
-  + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+  + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
-1. In the BrowserHax release archive, open the folder corresponding to your console's region
+1. En el archivo de BrowserHax que descargaste, abre la carpeta correspondiente a la región de tu consola
-1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+1. Copia la carpeta `3ds` y los archivos `browserhax_hblauncher_ropbin_payload.bin` y `arm11code.bin` al directorio raíz de tu tarjeta SD
-  + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+  + Ahora debería haber una carpeta llamada `Nintendo 3DS`, otra llamada `3ds` y los dos archivos `.bin` en la raíz de tu tarjeta SD
 
-#### Section II - BrowserHax
+### Sección II - BrowserHax
 
-1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Abre [esta imagen](https://3ds.eiphax.tech/pic/hax.png) en una nueva pestaña o ventana de tu computadora
-1. Safely remove your SD card from your computer and put it back in your console
+1. Extrae la tarjeta SD de forma segura de la computadora y ponla de vuelta en la consola
-1. Power on your console and ensure it is connected to an active WiFi network
+1. Enciende tu consola y asegúrate de estar conectado a una red WiFi activa
-1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+1. Desde el menú HOME, presiona el gatillo izquierdo y el derecho al mismo tiempo (L y R)
-  + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods)
+  + Esto debería abrir un escáner de QR. Si no abre un escáner de QR, USM (la próxima parte de instalar CFW) no funcionará para ti. Tendrás que usar un [método antiguo](legacy-methods)
-  + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+  + Si necesitas escribir el URL, es `https://zoogie.github.io/web/nbhax/`
-1. Use the QR scanner to scan the QR code you opened in the first step
+1. Usa el código QR para escanear el código que abriste en el primer paso
-1. Tap the "PROCEED TO HAXX" button
+1. Pulsa el botón "PROCEED TO HAXX"
-1. Espera a que el procesos se complete
+1. Espera a que el proceso se complete
-  + If it displays a yellow screen, power your console off, then try this section again
+  + Si la pantalla se queda en amarillo, apaga tu consola y vuelve a intentar esta sección
-1. Si el exploit fue exitoso, tu consola habrá cargado el Hombrew Launcher
+1. Si el exploit fue exitoso, tu consola habrá cargado el Homebrew Launcher
-  + You may see an error stating that no applications were found. If this occurs, proceed to the next steps
+  + Es posible que aparezca un error diciendo que no se han encontrado aplicaciones. De ser así, prosigue con el siguiente paso
-1. Leave your console on and proceed to the next section below
+1. Deja la consola encendida y prosigue con la siguiente sección
 
 
 ___
 
-### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+### Continúa en [Instalar boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
 {: .notice--primary}

_pages/es_ES/homebrew-launcher-(pichaxx).txt

@@ -6,12 +6,12 @@ title: "Homebrew Launcher (PicHaxx)"
 
 ### Lectura requerida
 
-This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. Éste método requiere de haber conseguido (o descargado) el videojuego gratuito "Pokémon Picross" desde la eShop.
+Este método de Seedminer utiliza tu archivo `movable.sed` para tener acceso al Homebrew Launcher mediante el exploit PicHaxx, con el objetivo de inyectar un programa de DSiWare dentro de la aplicación de Modo Descarga DS. Éste método requiere de haber conseguido (o descargado) el videojuego gratuito "Pokémon Picross" desde la eShop.
 
-If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)).
+Si tu consola ya tiene acceso al Homebrew Launcher (desde PicHaxx u otro exploit), puedes pasar a [DSiWare Dumper](dsidumper).
 {: .notice--success}
 
-If you already have Pokemon Picross, this process will overwrite your game's save file!
+Si ya tienes Pokémon Picross, ¡éste proceso sobreescribirá tu partida guardada!
 {: .notice--warning}
 
 ### Qué necesitas
@@ -32,23 +32,23 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
 
 #### Sección II - PicHaxx
 
-1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer
+1. Abre [la página de PicHaxx Injector](https://seedminer.hacks.guide/pichaxx/) en tu computadora
 1. Selecciona tu archivo `movable.sed`
-1. Select "Build and Download"
+1. Selecciona "Build and Download" (Construir y Descargar)
-1. Espera a que el procesos se complete
+1. Espera a que el proceso se complete
-1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
+1. En tu tarjeta SD ve a `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data`
   + La `<ID0>` en cuestión es la misma que usaste en [Seedminer](seedminer)
-  + Esta carpeta `<ID1>` será otra carpeta de 32 caracteres/numeros dentro de la carpeta `<ID0>`
+  + La carpeta `<ID1>` será otra carpeta de 32 caracteres dentro de la carpeta `<ID0>`
-1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
+1. Copia el archivo `00000001.sav` recién descargado a la carpeta `data` dentro de tu tarjeta SD
-  + Sobreescribe el archivo anterior cuando te lo pida
+  + Sobreescribe el archivo anterior cuando se te pida
-1. Vuelve a insertar tu tarjeta SD en tu consola
+1. Vuelve a insertar tu tarjeta SD en la consola
 1. Enciende tu consola
-1. Launch "Pokemon Picross"
+1. Inicia "Pokémon Picross"
-1. Si el exploit fue exitoso, tu consola habrá cargado el Hombrew Launcher
+1. Si el exploit fue exitoso, tu consola habrá cargado el Homebrew Launcher
   + Es posible que aparezca un error diciendo que no se han encontrado aplicaciones.
 1. Apaga tu consola.
 
 ___
 
-### Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+### Continúa a [Instalar boot9strap (Frogtool)](installing-boot9strap-(frogtool))
 {: .notice--primary}

_pages/es_ES/installing-boot9strap-(hbl-usm).txt

@@ -1,69 +1,69 @@
 ---
-title: "Installing boot9strap (HBL-USM)"
+title: "Instalar boot9strap (USM)"
 ---
 
 {% include toc title="Tabla de contenidos" %}
 
 ### Lectura requerida
 
-In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+Para poder aprovechar el exploit del firmware SAFE_MODE de la consola, necesitamos inyectar un perfil de WiFi con el exploit.
 
-As we already have Homebrew access, we can use slotTool to do this.
+Como ya tenemos acceso a Homebrew, podemos utilizar slotTool para hacerlo.
 
-This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+Este método en específico está pensado para ser utilizado con acceso al Homebrew Launcher a través de [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
 
-If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+Si tienes acceso al Homebrew Launcher a través de otro punto de entrada, debes utilizar [Frogtool](installing-boot9strap-(frogtool)).
 
-Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+Una vez que el perfil de WiFi ha sido inyectado, usaremos SAFE_MODE, que consiste en una función de recuperación presente en todas las consolas, para activar el perfil de WiFi con el exploit.
 
-Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema.
+Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, tal y como se indica por las letras U, E, J o K después de la versión del sistema.
 
-If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+Si tus botones (Right/Left Shoulder), (D-Pad arriba) o (A) no funcionan, deberás utilizar un [Método antiguo](legacy-methods). Para ayuda con este asunto, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedir, en inglés, que te ayuden.
 {: .notice--danger}
 
 ### Qué necesitas
 
-* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* La ultima versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+* La ultima versión de [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
 
 #### Sección I - Preparativos
 
-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Tu consola debería estar encendida y mostrando la pantalla del Homebrew Launcher, de la parte anterior de la guía
-1. Launch slotTool from the list of homebrew
+1. Inicia slotTool desde la lista de homebrew
-  + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+  + Si te quedas atascado en una pantalla roja, fuerza el apagado de la consola manteniendo pulsado el botón de encendido durante 15 segundos e intenta de nuevo esta sección
-1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+1. Selecciona la opción "INSTALL exploit to wifi slots 1,2,3 & shutdown"
-  + You will see some on-screen text and then your system will shut down
+  + Verás algo de texto en pantalla y luego la consola se apagará
-1. Remove your SD card from your console and connect it to your computer
+1. Extrae la tarjeta SD de la consola y conéctala en la computadora
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+1. Copia el archivo `boot.firm` presente en el archivo `.zip` de Luma3DS al directorio raíz de tu tarjeta SD, sobreescribiendo archivos preexistentes si los hay
-1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Copia el archivo `usm.bin` desde el `.zip` de unSAFE_MODE a la raíz de tu tarjeta SD
-1. Put your SD card back into your console
+1. Reinserta la tarjeta SD en tu consola
 
-#### Section II - unSAFE_MODE
+#### Sección II - unSAFE_MODE
 
-1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+1. Con tu consola aún apagada, mantén pulsados los siguientes botones: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), luego presiona (Power)
-  + Keep holding the buttons until the console boots into Safe Mode
+  + Mantén pulsados los botones hasta que la consola encienda en modo seguro
-1. Press "OK" to accept the update
+1. Presiona "OK" para aceptar la actualización
-  + There is no update. This is part of the exploit
+  + No hay actualización. Esto es parte del exploit
-1. Press "I accept" to accept the terms and conditions
+1. Presiona "Acepto" para aceptar los términos y condiciones
-1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. La actualización fallará, con el código de error `003-1099`. Este comportamiento es el esperado
-1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. Cuando se te pregunte "¿Quieres configurar tu conexión a internet?", presiona "Aceptar"
-1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+1. En el menú siguiente, navega a `Conexión 1` -> `Modificar ajustes` -> `Siguiente página (flecha derecha)` -> `Servidor proxy` -> `Ajustes avanzados`
-  + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+  + Aquí hay una [representación visual](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. Una vez que veas `B9S install SUCCESS` en la pantalla superior, presiona cualquier botón para reiniciar a la configuración de Luma
 
 #### Sección III - Configuración de Luma3DS
 
-1. Your device should automatically show the Luma Configuration menu
+1. Tu consola debería mostrar automáticamente el menú de configuración de Luma
 1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
   + **"Show NAND or user string in System Settings"**
 1. Presiona (Start) para guardar y reiniciar
   + Tu consola deberá cargar el Menú HOME después de un breve momento. Si la pantalla se queda en negro por más de 5 minutos, [sigue la guía de solución de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
 
-#### Section IV - Restoring WiFi Configuration Profiles
+#### Sección IV - Restaurando los Perfiles de Configuración de Red Inalámbrica
 
 1. Inicia la aplicación de Modo Descarga
 1. Espera hasta que veas los dos botones
-  + Do not press either of the buttons
+  + No presiones ninguno de los botones
 1. Presiona (Left Shoulder) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina
 1. Selecciona "Miscellaneous options"
 1. Selecciona "Switch the hb. title to the current app."
@@ -71,11 +71,11 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 1. Presiona (B) para regresar al menú principal de Rosalina
 1. Presiona (B) para salir del menú de Rosalina
 1. Presiona (Home), luego cierra la aplicación de Modo Descarga
-1. Relaunch the Download Play application
+1. Inicia la aplicación de Modo Descarga otra vez
 1. Tu consola debería cargar el Homebrew Launcher
-1. Launch slotTool from the list of homebrew
+1. Inicia slotTool desde la lista de homebrew
-1. Select "RESTORE original wifi slots 1,2,3"
+1. Selecciona "RESTORE original wifi slots 1,2,3"
-1. Your device will then reboot
+1. Tu consola se reiniciará
 
 ___
 

_pages/es_ES/installing-boot9strap-(usm).txt

@@ -1,89 +1,90 @@
 ---
-title: "Installing boot9strap (USM)"
+title: "Instalar boot9strap (USM)"
 ---
 
 {% include toc title="Tabla de contenidos" %}
 
 ### Lectura requerida
 
-In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+Para pode aprovechar el exploit del firmware SAFE_MODE de nuestro sistema, necesitamos inyectar un perfil de WiFi con el exploit.
 
-We can do this using an existing exploit, BannerBomb3.
+Podemos hacer esto utilizando un exploit existente, BannerBomb3.
 
-To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list.
+Para lograrlo, usamos la llave de cifrado de tu sistema (movable.sed) para crear una copia de seguridad de DSiWare que vulnera el sistema de modo de inyectar el perfil de WiFi con el exploit en tu lista de conexiones.
 
-Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+Una vez que el perfil de WiFi ha sido inyectado, usaremos SAFE_MODE, que consiste en una función de recuperación presente en todas las consolas, para activar el perfil de WiFi con el exploit.
 
 Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema.
 
-If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+Si tus botones (Right/Left Shoulder), (D-Pad arriba) o (A) no funcionan, deberás utilizar un [Método antiguo](legacy-methods). Para ayuda con este asunto, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedir, en inglés, que te ayuden.
 {: .notice--danger}
 
 ### Qué necesitas
 
 * Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer)
-* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* La ultima versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
 
 #### Sección I - Preparativos
 
-1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+1. Abre la herramienta [unSAFE_MODE-bb3](https://usm.bruteforcemovable.com/) en tu computadora
+  + Si el sitio no está operativo, intenta con [éste otro](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Carga tu movable.sed usando la opción "Choose File"
-1. Click "Download unSAFE_MODE-bb3 archive"
+1. Haz clic en "Download unSAFE_MODE-bb3 archive"
-  + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
+  + Esto descargará un exploit de DSiWare llamado `F00D43D5.bin` y un archivo de datos de exploit para SAFE_MODE llamado `usm.bin` dentro de un archivo zip (`unSAFE_MODE-bb3.zip`)
 1. Si tu consola está encendida, apagala
 1. Inserta tu tarjeta SD en tu computadora
 1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD
-1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card
+1. Copia `usm.bin` desde el archivo USM (`unSAFE_MODE-bb3.zip`) a la raíz de tu tarjeta SD
 1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID-de-32-caracteres>` -> `Nintendo DSiWare` en tu tarjeta SD
   + La `<ID0>` en cuestión es la misma que usaste en [Seedminer](seedminer)
   + Si `Nintendo DSiWare` no existe, créala
 1. Si ya hay archivos de copias de seguridad existentes de DSiWare (`<id-de-8-caracteres>.bin`) en esta carpeta, muévelos a tu PC
-  + Esto te dejará con una carpeta de Nintendo DSiWare vacía. Moving the files to your PC ensures you don't delete any intentional backups
+  + Esto te dejará con una carpeta de Nintendo DSiWare vacía. Mover los archivos a tu PC asegura que no borres ninguna copia de seguridad creada intencionalmente
-1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder
+1. Copia el archivo `F00D43D5.bin` del archivo USM (`unSAFE_MODE-bb3.zip`) a la carpeta `Nintendo DSiWare`
 
-#### Section II - BannerBomb3
+#### Sección II - BannerBomb3
 
 1. Vuelve a insertar tu tarjeta SD en tu consola
 1. Enciende tu consola
 1. Entra a Configuración de la consola
 1. Ve a `Data Management` -> `DSiWare`
 1. Haz click en la sección de tarjeta SD
-  + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied
+  + La pantalla inferior debería parpadear en rojo y el sistema se reiniciará en el Menú HOME unos segundos más tarde. Esto significa que el perfil de exploit se ha copiado correctamente
-  + If the bottom screen does not flash Red, the exploit profile was not copied and you will not be able to complete the next section. Ensure that your files are properly placed, then try again
+  + Si la pantalla inferior no parpadea en Rojo por un segundo, el perfil con el exploit no fue copiado y no podrás completar la siguiente sección. Asegúrate de que tus archivos están correctamente colocados, luego vuelve a intentarlo
 1. Apaga tu consola
 
-#### Section III - unSAFE_MODE
+#### Sección III - unSAFE_MODE
 
-1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+1. Con tu consola aún apagada, mantén pulsados los siguientes botones: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), luego presiona (Power)
-  + Release the buttons after a few seconds. Your console will boot into Safe Mode
+  + Suelta los botones después de unos segundos. Tu consola iniciará en modo seguro
-1. Press "OK" to accept the update
+1. Presiona "OK" para aceptar la actualización
-  + There is no update. This is part of the exploit
+  + No hay actualización. Esto es parte del exploit
-1. Press "I accept" to accept the terms and conditions
+1. Presiona sobre "Acepto" para aceptar los términos y condiciones
-1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. La actualización fallará, con el código de error `003-1099`. Este comportamiento es el esperado
-1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. Cuando se te pregunte "¿Quieres configurar tu conexión a internet?", selecciona "Aceptar"
-1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+1. En el menú siguiente, navega a `Conexión 1` -> `Modificar ajustes` -> `Siguiente página (flecha derecha)` -> `Servidor proxy` -> `Ajustes avanzados`
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. Una vez que veas `B9S install SUCCESS` en la pantalla superior, presiona cualquier botón para reiniciar a la configuración de Luma
 
 #### Sección IV - Configurar Luma3DS
 
-1. Your device should automatically show the Luma Configuration menu
+1. Tu consola debería mostrar automáticamente el menú de configuración de Luma
 1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
   + **"Show NAND or user string in System Settings"**
 1. Presiona (Start) para guardar y reiniciar
   + Tu consola deberá cargar el Menú HOME después de un breve momento. Si la pantalla se queda en negro por más de 5 minutos, [sigue la guía de solución de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
 
-#### Section V - Restoring WiFi Configuration Profiles
+#### Sección V - Restaurar los perfiles de configuración WiFi
 
 1. Entra a Configuración de la consola
 1. Ve a `Data Management` -> `DSiWare`
 1. Haz click en la sección de tarjeta SD
-  + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
+  + La pantalla inferior debería parpadear en verde y el sistema se reiniciará al Menú HOME unos segundos más tarde. Esto significa que los perfiles de configuración WiFi fueron restaurados con éxito
-1. Power your system off
+1. Apaga tu consola
 1. Inserta tu tarjeta SD en tu computadora
 1. Ve a `Nintendo 3DS` -> `<ID0>` -> `<ID-de-32-caracteres>` -> `Nintendo DSiWare` en tu tarjeta SD
   + La `<ID0>` en cuestión es la misma que usaste en [Seedminer](seedminer)
-1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
+1. Elimina `F00D43D5.bin` de la carpeta Nintendo DSiWare
-1. Continue to Finalizing Setup
+1. Continúa en Finalizar instalación
 
 ___
 

_pages/es_ES/legacy-methods.txt

@@ -1,46 +1,46 @@
 ---
-title: "Legacy Methods"
+title: "Métodos antiguos"
 ---
 
 {% include toc title="Tabla de contenidos" %}
 
 ### Lectura requerida
 
-There have been multiple improvements and advancements to methods for installing CFW over the last short while.
+Han habido múltiples mejoras y avances en los métodos para instalar Custom Firmware en el último tiempo.
 
-For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
+Por este motivo, se recomienda que utilices el método más actualizado de los que hay en [Comencemos](get-started).
 
-However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
+Sin embargo, los métodos antiguos ("legacy") o anticuados se mantienen aquí por varios propósitos. Ellos requerirán que primero hayas completado la guía de [Seedminer](seedminer).
 
-If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance.
+Si necesitas ayuda, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedirla, en inglés.
 
 #### Sección I - Prueba de compatibilidad
 
-The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play.
+Los exploits a continuación hacen uso de una de las dos aplicaciones del Modo DS que vienen incorporadas en la 3DS: Conexiones de Nintendo DS y Modo Descarga DS.
 
-If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx.
+Si tanto el Modo Descarga DS como la configuración de Conexiones de Nintendo DS no funcionan, tendrás que repararlos usando [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) mediante un punto de entrada a homebrew, como Pichaxx.
 
 #### Prueba de la Configuración de Internet de DS (utilizada para Fredtool)
 
 1. Ve a Configuración de la Consola, luego a "Ajustes de Internet", luego a "Conexiones de Nintendo DS"
 1. Presiona "OK"
 1. Si tu consola carga un menú que dice "Nintendo Wi-Fi Connection Setup", la prueba fue exitosa
-  + If the screen stays black or appears to freeze, the test has failed
+  + Si la pantalla se queda en negro o parece congelada, la prueba ha fallado
 1. Sal de este menú
 
 #### Prueba del Modo Descarga de DS (utilizado para Frogtool)
 
 1. Ejecuta la aplicación Modo Descarga (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
 1. Selecciona "Nintendo DS"
-1. If your device loads into a “Download software via DS Download Play” menu, the test was successful 
+1. Si tu consola carga un menú que dice "Download software via DS Download Play", la prueba fue exitosa 
-  + If the screen stays black or appears to freeze, the test has failed
+  + Si la pantalla se queda en negro o parece congelada, la prueba ha fallado
 1. Sal de este menú
 
 ___
 
 1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE
-  + This method requires working shoulder buttons
+  + Este método requiere que los botones traseros de la consola funcionen bien (L y R)
 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool
-  + This method is recommended if your shoulder buttons do not work
+  + Este método se recomienda si los botones traseros de la consola no funcionan (L y R)
 1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool
-  + This method is recommended if your DSiWare Management menu crashes
+  + Se recomienda este método si el menú de Gestión de Nintendo DSiware se cuelga o traba

_pages/es_ES/move-emunand.txt

@@ -16,7 +16,7 @@ Ya DEBES tener instalado Luma3DS y boot9strap para usar esto.
 ### Qué necesitas
 
 * Una EmuNAND existente
-* La ultima versión de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versión v1.9.2pre1 de [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * La última versión de [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instrucciones

_pages/es_ES/region-changing.txt

@@ -29,7 +29,7 @@ Ya DEBES tener instalado Luma3DS y boot9strap para usar esto.
 
 ### Qué necesitas
 
-* La ultima versión de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versión v1.9.2pre1 de [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * La última versión de [FBI](https://github.com/Steveice10/FBI/releases/latest) *(el archivo `.3dsx`)*
 * La imagen CTRTransfer 11.5.0 para tu consola y región a la que quieras cambiar:
   +    <i class="fa fa-magnet" aria-hidden="true" title="Este es un enlace magnético. Usa un cliente torrent para descargar el archivo."></i> - [New 3DS o 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/es_ES/seedminer.txt

@@ -20,15 +20,15 @@ Este método utiliza una tarjeta gráfica potente para realizar los cálculos ne
 
 Si bien esta prueba no es estrictamente necesaria para poder ejecutar el exploit Seedminer, los exploits posteriores a éste requieren que la prueba se realice y sería una pérdida de tiempo y esfuerzo ejecutar Seedminer sin ser capaz de ejecutar el resto de exploits.
 
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
+Hay varios métodos distintos basados en el exploit de Seednminer, por lo que incluso si esta prueba falla puedes utilizar otro método aún.
 
-#### DSiWare Management Test (used for unSAFE_MODE)
+#### Prueba de Gestión de Nintendo DSiWare (para uso en unSAFE_MODE)
 
-1. Go to System Settings, then "Data Management", then "DSiWare"
+1. Ve a "Configuración de la Consola", luego a "Gestión de Datos", luego a "DSiWare"
-1. If your console does not crash, the test was successful
+1. Si la consola no se traba o cuelga, la prueba fue exitosa
-  + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
+  + Si la consola se cuelga y regresa al menú HOME, la prueba falló y tendrás que utilizar un método antiguo; ve al final de la página
-  + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + Si la pantalla se pone de un color por un segundo antes de colgarse e ir al menú HOME, entra al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) (en Inglés) y pide a alguien que te ayude
-1. Exit to home menu
+1. Sal al menú HOME
 
 #### Sección II - Preparativos
 
@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Entra a [Bruteforce Movable](https://seedminer.hacks.guide/) en tu computadora
   + Este sitio puede automatizar la obtención del `movable_part1.sed` (utilizando un bot que simula una consola 3DS) y la ruptura de la encriptación DSiWare de tu consola (utilizando la computadora de un voluntario para ejecutar Seedminer)
-  + Si el sistema automático no está operativo, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) (en inglés) y pide ayuda a alguien de allí
+  + Si el sitio no está operativo, intenta con [éste otro](https://bfm.nintendohomebrew.com/)
+  + Si ninguno de los dos sitios está operativo, entra al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) y pide a alguien que te ayude (en Inglés)
 1. Ingresa el código de amigo de tu consola (sin espacios ni guiones) en donde dice "Your friend code"
 1. Copia y pega el nombre de 32 caracteres donde dice "Your ID0"
   + No intentes introducir el ID0 a mano. Asegúrate de que el ID0 se introduzca correctamente copiándolo y pegándolo desde donde lo guardaste en la sección anterior
@@ -77,17 +78,17 @@ ___
 
 #### Seedminer + unSAFE_MODE
 
-This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
+Éste método con Seedminer, para mejorar el exploit, utiliza tu archivo `movable.sed` para tomar ventaja de exploits en el firmware SAFE_MODE presente en todas las consolas 3DS.
 
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+Este método es compatible con todas las regiones, sin embargo, la región CHN no está cubierta por esta guía.
 
-Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
+Continúa a [Instalar boot9strap (USM)](installing-boot9strap-(usm))
 {: .notice--primary}
 
 ___
 
 #### Métodos anteriores
 
-These methods are outdated and not recommended unless otherwise indicated.
+Estos métodos son obsoletos y no se recomiendan a menos que se indique lo contrario.
 
 [Métodos anteriores](legacy-methods)

_pages/es_ES/site-navigation.txt

@@ -52,7 +52,7 @@ sitemap: false
 + [Instalar boot9strap (SafeB9SInstaller)](installing-boot9strap-(Safeb9sInstaller))
 + [Instalar boot9strap (Soundhax)](installing-boot9strap-(soundhax))
 + [Instalar boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
-+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
++ [Instalar boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
 + [Mover EmuNAND](move-emunand)
 + [ntrboot](ntrboot)
 + [Cambio de Región](region-changing)

_pages/es_ES/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en
 
 ### Qué necesitas
 
-* La ultima versión de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versión v1.9.2pre1 de [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instrucciones
 
@@ -41,12 +41,12 @@ Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en
   + En una consola "New", la (X) será un 2
   + En una consola "Old", la (X) será un 0
 1. Selecciona el archivo `.app`
-1. Select `NCCH image options`
+1. Selecciona `NCCH image options`
 1. Selecciona `Mount image to drive`
 1. En la ventana que aparece, abre la carpeta `exefs`
 1. En esta carpeta, selecciona el archivo `.firm`
-1. Select "FIRM image options"
+1. Selecciona "FIRM image options"
-1. Select "Boot FIRM"
+1. Selecciona "Boot FIRM"
 1. Cuando se solicite, elige "decrypt and make a copy"
 1. Deberías iniciar en el Menú HOME normal de 3DS. Si lo haces, apaga tu consola y continúa en la siguiente sección
   + Si NO inicias en el Menú HOME normal de 3DS, continuar con estas instrucciones **INHABILITARÁ** tu consola. Deberías unirte al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) y pide (en inglés) ayuda a alguien de allí

_pages/et_EE/ctrtransfer.txt

@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and region     
 *(if your device is not from one of these regions, just pick one that matches your device type)*:    

_pages/et_EE/finalizing-setup.txt

@@ -26,12 +26,11 @@ During this process, we also setup programs such as the following:
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Instructions
 
@@ -51,7 +50,6 @@ During this process, we also setup programs such as the following:
 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card
 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
 1. Reinsert your SD card into your device
 1. Power on your device
@@ -104,8 +102,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
 #### Section VI - CTRNAND Luma3DS
 
 1. Power off your device
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Launch GodMode9 by holding (Start) during boot
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
 1. Press (Home) to bring up the action menu

_pages/et_EE/godmode9-usage.txt

@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/et_EE/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Section I - Prep Work
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/et_EE/move-emunand.txt

@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 ### What You Need
 
 * An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Instructions

_pages/et_EE/region-changing.txt

@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
   +    <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)

_pages/et_EE/seedminer.txt

@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
 
 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
   + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
-  + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+  + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+  + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
 1. Paste your device's 32 character long folder name into the "Your ID0" field
   + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section

_pages/et_EE/uninstall-cfw.txt

@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 
 ### What You Need
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Instructions
 

_pages/fi_FI/ctrtransfer.txt

@@ -17,7 +17,7 @@ Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi
 
 ### Tarpeet
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * Konsolisi mallin ja alueen mukainen 11.5.0-CTRTransfer-näköistiedosto     
 *(jos konsolisi ei kuulu mihinkään näistä alueista, valitse mikä tahansa sen mallia vastaava linkki)*:    

_pages/fi_FI/finalizing-setup.txt

@@ -26,12 +26,11 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
 * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
 * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
 * The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)*
-* [DO_NOT_LAUNCH.firm](assets/DO_NOT_LAUNCH.firm)
 
 ### Ohjeet
 
@@ -51,7 +50,6 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
 1. Kopioi `Checkpoint.cia` SD-korttisi `/cias/`-kansioon
 1. Luo `payloads`‑niminen kansio SD‑korttisi `luma`-kansioon, jos sitä ei jo ole olemassa
 1. Kopioi GodMode9‑`.zip`‑pakkauksesta `GodMode9.firm` SD-korttisi `/luma/payloads/`‑kansioon
-1. Copy `DO_NOT_LAUNCH.firm` to the `/luma/payloads/` folder on your SD card
 1. Kopioi GodMode9-`.zip`-pakkauksesta `gm9`-kansio SD-korttisi juureen
 1. Aseta SD-korttisi takaisin konsoliisi
 1. Käynnistä konsolisi
@@ -104,8 +102,7 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais
 #### Vaihe VI – Luma3DS:n asentaminen CTRNANDiin
 
 1. Sammuta konsolisi
-1. Hold (Start) during boot to open the Luma3DS chainloader
+1. Avaa GodMode9 pitämällä (START)-painiketta pohjassa konsolin käynnistyessä
-1. Press (A) with GodMode9 highlighted in red to launch it
 1. Jos ohjelma kehottaa luomaan varmuuskopion tärkeistä tiedostoista (essential files), paina (A):ta tehdäksesi sen, ja kun varmuuskopio on valmis, paina (A):ta uudelleen jatkaaksesi
 1. Jos sinua kehotetaan korjaamaan RTC-aika ja -päivämäärä, paina (A):ta ja aseta ne oikein, paina sitten (A):ta jatkaaksesi
 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon

_pages/fi_FI/godmode9-usage.txt

@@ -22,7 +22,7 @@ Jotkin alla olevista ohjeista pätevät vain GodMode9:n viimeisimpään versioon
 
 ### Tarpeet
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 
 ### Ohjeet
 

_pages/fi_FI/installing-boot9strap-(usm).txt

@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
 #### Vaihe I – Valmistelut
 
 1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+  + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
 1. Upload your movable.sed using the "Choose File" option
 1. Click "Download unSAFE_MODE-bb3 archive"
   + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)

_pages/fi_FI/move-emunand.txt

@@ -16,7 +16,7 @@ Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi
 ### Tarpeet
 
 * EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
 
 ### Ohjeet

_pages/fi_FI/region-changing.txt

@@ -29,7 +29,7 @@ Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi
 
 ### Tarpeet
 
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
 * 11.5.0-CTRTransfer-näköistiedosto konsolisi mallille sekä alueelle, johon haluat vaihtaa:
   +    <i class="fa fa-magnet" aria-hidden="true" title="Tämä on magneettilinkki. Use a torrent client to download the file."></i> - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)