New Crowdin updates (#1790)

* New translations uninstall-cfw.txt (Romanian) * New translations uninstall-cfw.txt (Czech) * New translations uninstall-cfw.txt (Catalan) * New translations uninstall-cfw.txt (German) * New translations uninstall-cfw.txt (Danish) * New translations uninstall-cfw.txt (Spanish) * New translations uninstall-cfw.txt (French) * New translations uninstall-cfw.txt (Arabic) * New translations uninstall-cfw.txt (Afrikaans) * New translations uninstall-cfw.txt (Japanese) * New translations uninstall-cfw.txt (Italian) * New translations uninstall-cfw.txt (Dutch) * New translations uninstall-cfw.txt (Korean) * New translations uninstall-cfw.txt (Finnish) * New translations uninstall-cfw.txt (Greek) * New translations uninstall-cfw.txt (Hungarian) * New translations uninstall-cfw.txt (Hebrew) * New translations uninstall-cfw.txt (Portuguese) * New translations uninstall-cfw.txt (Russian) * New translations uninstall-cfw.txt (Norwegian) * New translations uninstall-cfw.txt (Polish) * New translations uninstall-cfw.txt (Turkish) * New translations uninstall-cfw.txt (Ukrainian) * New translations uninstall-cfw.txt (Serbian (Cyrillic)) * New translations uninstall-cfw.txt (Swedish) * New translations uninstall-cfw.txt (Thai) * New translations uninstall-cfw.txt (Indonesian) * New translations uninstall-cfw.txt (Estonian) * New translations uninstall-cfw.txt (Croatian) * New translations uninstall-cfw.txt (Chinese Traditional) * New translations uninstall-cfw.txt (Chinese Simplified) * New translations uninstall-cfw.txt (Portuguese, Brazilian) * New translations uninstall-cfw.txt (Vietnamese) * New translations uninstall-cfw.txt (Pirate English) * New translations uninstall-cfw.txt (Malay) * New translations homebrew-launcher-(browserhax-2020).txt (Italian) * New translations uninstall-cfw.txt (Italian) * New translations homebrew-launcher-(browserhax-2020).txt (Italian) * New translations installing-boot9strap-(hbl-usm).txt (Italian) * New translations home.txt (Arabic) * New translations home.txt (Afrikaans) * New translations home.txt (Catalan) * New translations home.txt (French) * New translations home.txt (Romanian) * New translations home.txt (Spanish) * New translations home.txt (Hungarian) * New translations home.txt (Hebrew) * New translations home.txt (Japanese) * New translations home.txt (Italian) * New translations home.txt (Danish) * New translations home.txt (German) * New translations home.txt (Czech) * New translations home.txt (Finnish) * New translations home.txt (Greek) * New translations home.txt (Portuguese) * New translations home.txt (Polish) * New translations home.txt (Serbian (Cyrillic)) * New translations home.txt (Russian) * New translations home.txt (Dutch) * New translations home.txt (Korean) * New translations home.txt (Norwegian) * New translations home.txt (Turkish) * New translations home.txt (Swedish) * New translations home.txt (Thai) * New translations home.txt (Indonesian) * New translations home.txt (Estonian) * New translations home.txt (Malay) * New translations home.txt (Croatian) * New translations home.txt (Chinese Simplified) * New translations home.txt (Chinese Traditional) * New translations home.txt (Ukrainian) * New translations home.txt (Portuguese, Brazilian) * New translations home.txt (Vietnamese) * New translations home.txt (Pirate English) * New translations home.txt (Italian)
2020-09-10 02:02:44 -07:00 · 2020-09-10 02:02:44 -07:00 · 4bf9fd7018
commit 4bf9fd7018
parent 146c2609e5
72 changed files with 153 additions and 153 deletions
--- a/_pages/af_ZA/home.txt
+++ b/_pages/af_ZA/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/af_ZA/uninstall-cfw.txt
+++ b/_pages/af_ZA/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/ar_SA/home.txt
+++ b/_pages/ar_SA/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/ar_SA/uninstall-cfw.txt
+++ b/_pages/ar_SA/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/ca_ES/home.txt
+++ b/_pages/ca_ES/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/ca_ES/uninstall-cfw.txt
+++ b/_pages/ca_ES/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/cs_CZ/home.txt
+++ b/_pages/cs_CZ/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/cs_CZ/uninstall-cfw.txt
+++ b/_pages/cs_CZ/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/da_DK/home.txt
+++ b/_pages/da_DK/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/da_DK/uninstall-cfw.txt
+++ b/_pages/da_DK/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/de_DE/home.txt
+++ b/_pages/de_DE/home.txt
@ -81,7 +81,7 @@ Für eine Liste aller berechneten sighax-Signaturen, siehe in [diesem gist](http
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Wenn alles nach Plan verläuft, wirst du keine Daten verlieren und dein System wird die gleichen Daten wie vorher haben (Spiele, NNID, Speicherstände, etc. werden erhalten bleiben).
 + Deine Konsole während des gesamten Prozesses mit dem Ladekabel aufzuladen vermeidet Datenverluste oder Schäden durch unerwartetes Ausschalten!
-+ Deine SD-Karte sollte mit [MBR, nicht GPT](http://www.howtogeek.com/245610/) formatiert sein. (Die mitgelieferte SD-Karte ist standardmäßig mit MBR formatiert).
+ Deine SD-Karte sollte mit [MBR, nicht GPT](http://www.howtogeek.com/245610/) formatiert sein. (Die mitgelieferte SD-Karte ist standardmäßig mit MBR formatiert). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + Mit dem Tool [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) kannst du eine SD-Karte passend formatieren. Denke daran, die Größe der Zuordnungseinheiten auf 32K (32768) zu setzen.
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/de_DE/uninstall-cfw.txt
+++ b/_pages/de_DE/uninstall-cfw.txt
@ -41,12 +41,12 @@ Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/el_GR/home.txt
+++ b/_pages/el_GR/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Εάν όλα πάνε σύμφωνα με το σχέδιο, δεν θα χάσετε τα δεδομένα σας και θα καταλήξετε με όλα όσα ξεκινήσατε (παιχνίδια, NNID, saves, κλπ. θα διατηρηθούν).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/el_GR/uninstall-cfw.txt
+++ b/_pages/el_GR/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/en_PT/home.txt
+++ b/_pages/en_PT/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everythin' goes accordin' to plan, ye gunna lose no data 'n be endin' up wit' everythin' that ye started wit' (games, NNID, saves, etc gunna be preserved).
 + Keep ye device plugged in 'n charged throughout th' entire process to avoid data loss or damage from an unexpected power-off!
-+ Ye SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (th' SD card that comes wit' ye device gunna be MBR by default).
+ Ye SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (th' SD card that comes wit' ye device gunna be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/en_PT/uninstall-cfw.txt
+++ b/_pages/en_PT/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if ye have any payload files other than `GodMode9.firm` in th' `/luma/
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/es_ES/home.txt
+++ b/_pages/es_ES/home.txt
@ -81,7 +81,7 @@ Para una lista de cada una de las firmas calculadas de sighax, echa un vistazo a
 + Esta guía servirá para consolas New 3DS, Old, 3DS, New 2DS y Old 2DS de cualquier región, en versión de firmware 11.13.0 o inferior.
 + Si todo va según el plan, no perderás datos y terminarás con todo lo que tenías anteriormente (juegos, NNID, datos de guardado, etc se conservarán).
 + Mantén tu consola conectada y cargada durante todo el proceso para evitar pérdidas de datos o daños, producto de un apagado inesperado!
-+ Tu tarjeta SD debe ser [MBR, no GPT](http://www.howtogeek.com/245610/) (la tarjeta SD que viene con tu consola es MBR por defecto).
+ Tu tarjeta SD debe ser [MBR, no GPT](http://www.howtogeek.com/245610/) (la tarjeta SD que viene con tu consola es MBR por defecto). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + Si necesitas formatear una tarjeta SD nueva, puedes usar [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) y ajustar el tamaño de unidad de asignación a 32K (32768)).
 + La Old 2DS es esencialmente idéntica a la Old 3DS en términos de software, mientras que la New 2DS es esencialmente idéntica a la New 3DS en términos de software. Cualquier paso que diga "Old 3DS" también aplican a la Old 2DS, y cualquier paso que diga "New 3DS" también aplica a la New 2DS.

--- a/_pages/es_ES/uninstall-cfw.txt
+++ b/_pages/es_ES/uninstall-cfw.txt
@ -41,12 +41,12 @@ Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en
  + En una consola "New", la (X) será un 2
  + En una consola "Old", la (X) será un 0
 1. Selecciona el archivo `.app`
-1. Selecciona `NCCH Image Options`
+1. Select `NCCH image options`
 1. Selecciona `Mount image to drive`
 1. En la ventana que aparece, abre la carpeta `exefs`
 1. En esta carpeta, selecciona el archivo `.firm`
-1. Selecciona "Firm Image Options"
-1. Selecciona "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. Cuando se solicite, elige "decrypt and make a copy"
 1. Deberías iniciar en el Menú HOME normal de 3DS. Si lo haces, apaga tu consola y continúa en la siguiente sección
  + Si NO inicias en el Menú HOME normal de 3DS, continuar con estas instrucciones **INHABILITARÁ** tu consola. Deberías unirte al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) y pide (en inglés) ayuda a alguien de allí
--- a/_pages/et_EE/home.txt
+++ b/_pages/et_EE/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/et_EE/uninstall-cfw.txt
+++ b/_pages/et_EE/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/fi_FI/home.txt
+++ b/_pages/fi_FI/home.txt
@ -81,7 +81,7 @@ Luettelon kaikista lasketuista sighaxin allekirjoituksista löydät [tästä gis
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Jos kaikki menee suunnitelmien mukaan, et menetä mitään tietoja ja päädyt samaan kokoonpanoon, joka sinulla oli alussa (pelit, NNID, tallennukset jne. säilyvät).
 + Pidä konsolisi latauksessa koko prosessin ajan välttyäksesi tietojen menettämiseltä tai odottamattomasta sammumisesta aiheutuvalta vahingolta!
-+ SD-korttisi osiointimallin on oltava [MBR, ei GPT](http://www.howtogeek.com/245610/) (konsolin mukana tulevassa kortissa se on oletuksena MBR).
+ SD-korttisi osiointimallin on oltava [MBR, ei GPT](http://www.howtogeek.com/245610/) (konsolin mukana tulevassa kortissa se on oletuksena MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/fi_FI/uninstall-cfw.txt
+++ b/_pages/fi_FI/uninstall-cfw.txt
@ -41,12 +41,12 @@ Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/fr_FR/home.txt
+++ b/_pages/fr_FR/home.txt
@ -82,7 +82,7 @@ Personnalisez votre Menu Home avec des [thèmes et écrans d'accueil créés par
 + Ce guide fonctionnera sur les New 3DS, Old 3DS, New 2DS et Old 2DS de toutes les régions en version 11.13.0 ou inférieure.
 + Si tout se passe comme prévu, vous ne perdrez aucune donnée et finirez avec tout ce que vous aviez au départ (les jeux, votre NNID, les sauvegardes, etc., seront préservées).
 + Assurez-vous que votre console reste branchée et chargée pendant l'intégralité du processus pour éviter la perte de données ou les dommages causés par une extinction inattendue!
-+ Votre carte SD doit être en [MBR, pas GPT](http://www.howtogeek.com/245610/) (la carte SD fournie avec la console est en MBR par défaut).
+ Votre carte SD doit être en [MBR, pas GPT](http://www.howtogeek.com/245610/) (la carte SD fournie avec la console est en MBR par défaut). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + Si vous devez formater une carte SD neuve, vous pouvez utiliser [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) et choisir une taille d'unité d'allocation ("Allocation Unit Size") de 32K (32768).
 + La Old 2DS est essentiellement identique à la Old 3DS pour ce qui est du logiciel, tandis que la New 2DS est essentiellement identique à la New 3DS pour ce qui est du logiciel. Toute étape mentionnant "Old 3DS" s'applique également à la Old 2DS, et toute étape mentionnant "New 3DS" s'applique également à la New 2DS.

--- a/_pages/fr_FR/uninstall-cfw.txt
+++ b/_pages/fr_FR/uninstall-cfw.txt
@ -41,12 +41,12 @@ Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans l
  + Sur une console édition "New", le (X) sera plutôt un 2
  + Sur une console édition "Old", le (X) sera plutôt un 0
 1. Sélectionnez le fichier `.app`
-1. Sélectionnez `NCCH Image Options`
+1. Select `NCCH image options`
 1. Sélectionnez `Mount image to drive`
 1. Dans la fenêtre qui apparaît, ouvrez le dossier `exefs`
 1. Dans ce dossier, sélectionnez le fichier `.firm`
-1. Sélectionnez "Firm Image Options"
-1. Sélectionnez "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. Lorsque vous y êtes invité, choisissez de déchiffrer et de faire une copie
 1. Vous devriez démarrer sur le Menu HOME classique de la 3DS. Si c'est le cas, éteignez votre console et passez à la section suivante
  + Si votre console NE démarre PAS sur le Menu HOME classique de la 3DS, continuer de suivre ces instructions **VA** briquer votre console. Vous devriez rejoindre [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demander (en anglais) à quelqu'un de vous aider
--- a/_pages/he_IL/home.txt
+++ b/_pages/he_IL/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + אם הכול ילך לפי התוכנית, לא תאבדו נתונים ותסיימו עם כל מה שהתחלתם (משחקים, NNID, שמירות, ועוד).
 + תשמרו על המכשיר מחובר לחשמל וטעון לאורך כל התהליך כדי למנוע אובדן נתונים או נזק מכיבוי בלתי צפוי!
-+ ה- SD שלכם צריך להיות [MBR, לא GPT](http://www.howtogeek.com/245610/) (כרטיס ה- SD שמגיע עם המכשיר יהיה MBR כברירת מחדל).
+ ה- SD שלכם צריך להיות [MBR, לא GPT](http://www.howtogeek.com/245610/) (כרטיס ה- SD שמגיע עם המכשיר יהיה MBR כברירת מחדל). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/he_IL/uninstall-cfw.txt
+++ b/_pages/he_IL/uninstall-cfw.txt
@ -41,12 +41,12 @@ If you have modified critical system software (such as editing the home menu, un
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/hr_HR/home.txt
+++ b/_pages/hr_HR/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/hr_HR/uninstall-cfw.txt
+++ b/_pages/hr_HR/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/hu_HU/home.txt
+++ b/_pages/hu_HU/home.txt
@ -81,7 +81,7 @@ Az összes kiszámított sighax szignatúra megtalálható [ebben a gist-ben](ht
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Ha minden a terv szerint halad, nem fogsz semmilyen adatot elveszíteni, és a folyamat végén meglesz minden, ami korábban ott volt (játékok, NNID, mentések, stb. nem fognak elveszni).
 + Tartsd a készülékedet töltőn a teljes folyamat során, hogy elkerüld az adatvesztést vagy bármilyen kárt, ami egy nem várt kikapcsolásból adódhat!
-+ Az SD kártyád partíciós táblájának [MBR, és nem GPT](http://www.howtogeek.com/245610/) formátumúnak kell lennie (a készülékedhez csomagolt SD kártya gyárilag MBR formátumú lesz).
+ Az SD kártyád partíciós táblájának [MBR, és nem GPT](http://www.howtogeek.com/245610/) formátumúnak kell lennie (a készülékedhez csomagolt SD kártya gyárilag MBR formátumú lesz). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + Ha egy vadonatúj SD kártyát kell formáznod, használhatod a [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) nevű programot, a lemezfoglalási egység méretét (Allocation Unit Size) pedig állítsd 32K-ra (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/hu_HU/uninstall-cfw.txt
+++ b/_pages/hu_HU/uninstall-cfw.txt
@ -41,12 +41,12 @@ Vedd figyelembe, hogy amennyiben van más payload fájl a `GodMode9.firm` fájlo
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/id_ID/home.txt
+++ b/_pages/id_ID/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/id_ID/uninstall-cfw.txt
+++ b/_pages/id_ID/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/it_IT/home.txt
+++ b/_pages/it_IT/home.txt
@ -81,7 +81,7 @@ Per una lista di tutte le firme di sighax, è possibile consultare [questo gist]
 + Questa guida è applicabile a New 3DS, Old 3DS, New 2DS e Old 2DS di ogni regione e con versione del software 11.13.0 o inferiore.
 + Seguendo correttamente la guida non perderai alcun dato e manterrai tutto ciò che era installato nella console (per cui giochi, NNID, salvataggi, ecc verranno tutti conservati).
 + Mantieni sempre la console in carica per evitare la perdita di dati o danni derivanti dall'improvviso spegnimento della console!
-+ La tua scheda SD dovrebbe essere [MBR e non GPT](http://www.howtogeek.com/245610/) (la scheda SD preconfezionata con la console è MBR di default).
+ La tua scheda SD dovrebbe essere [MBR e non GPT](http://www.howtogeek.com/245610/) (la scheda SD preconfezionata con la console è MBR di default). Il modo più semplice per verificarlo è controllare che la scheda SD funzioni nel tuo 3DS. Se funziona, la scheda SD è MBR.
 + Se devi formattare una nuova scheda SD, puoi usare [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) e impostare Allocation Unit Size a 32K (32768).
 + A livello di software, un Old 2DS è essenzialmente identico a un Old 3DS, mentre un New 2DS è essenzialmente identico ad un New 3DS. Qualunque istruzione indicante "Old 3DS" si applica anche agli Old 2DS, e qualunque istruzione relativa ai "New 3DS" si applica ai New 2DS.

--- a/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt
+++ b/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt
@ -35,18 +35,18 @@ Per utilizzare questo metodo, la console deve provenire da una regione compatibi

 #### Sezione I - Preparazione

-1. Power off your console and remove the SD card
-1. Connect the SD card to your computer
+1. Spegni la tua console e rimuovi la scheda SD
+1. Inserisci la scheda SD nel tuo computer
 1. Copia il file `boot.3dsx` dai file scaricati dell'Homebrew Launcher nella directory principale della tua scheda SD
  + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
-1. In the BrowserHax release archive, open the folder corresponding to your console's region
-1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
-  + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+1. Nell'archivio di BrowserHax, apri la cartella corrispondente alla regione della tua console
+1. Copia la cartella `3ds` e i file `browserhax_hblauncher_ropbin_payload.bin` e `arm11code.bin` qui presenti nella directory principale della tua scheda SD
+  + Ora dovresti avere una cartella `Nintendo 3DS`, una cartella `3ds` e i due file `.bin` nella directory principale della scheda SD

 #### Sezione II - BrowserHax

 1. Apri [questa immagine](https://3ds.eiphax.tech/pic/hax.png) in una nuova scheda o finestra sul tuo computer
-1. Safely remove your SD card from your computer and put it back in your console
+1. Rimuovi in modo sicuro la scheda SD dal computer e reinseriscila nella console
 1. Accendi la tua console e assicurati che sia connessa a una rete WiFi attiva
 1. Dal menu HOME premi contemporaneamente i pulsanti L e R
  + Dovrebbe avviarsi lo Scanner QR. In caso contrario, USM (la parte successiva per l'avvio del custom firmware) non potrà funzionare. Dovrai usare un [metodo tradizionale](legacy-methods)
@ -57,7 +57,7 @@ Per utilizzare questo metodo, la console deve provenire da una regione compatibi
  + Se appare uno schermo giallo, spegni la console dopodiché ritenta questa sezione
 1. Se l'exploit ha avuto successo, la tua console avrà caricato l'Homebrew Launcher
  + Potresti riscontrare un errore relativo all'assenza di applicazioni. In tal caso, puoi procedere alla fase successiva
-1. Leave your console on and proceed to the next section below
+1. Lascia la console accesa e procedi alla sezione successiva indicata qui sotto


 ___
--- a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt
+++ b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt
@ -28,17 +28,17 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tra

 #### Sezione I - Preparazione

-1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Dalla sezione precedente della guida, la console dovrebbe essere già accesa e visualizzare la schermata dell'Homebrew Launcher
 1. Avvia slotTool dalla lista degli homebrew disponibili
  + Se rimani bloccato su una schermata rossa, spegni forzatamente la console tenendo premuto il pulsante di accensione per quindici secondi, quindi ritenta questa sezione
 1. Seleziona l'opzione "INSTALL exploit to wifi slots 1,2,3 & shutdown"
  + Apparirà del testo su schermo dopodiché la console si spegnerà
-1. Remove your SD card from your console and connect it to your computer
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+1. Rimuovi la scheda SD dalla console e connettila al computer
+1. Copia il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD, sovrascrivendo i file già esistenti
 1. Copia il file `usm.bin` dall'archivio `.zip` di unSAFE_MODE nella directory principale della tua scheda SD
-1. Put your SD card back into your console
+1. Reinserisci la scheda SD nella tua console

-#### Section II - unSAFE_MODE
+#### Sezione II - unSAFE_MODE

 1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché accendi la console
  + Mantieni premuti i pulsanti finché la console non si avvia in Safe Mode
@ -59,7 +59,7 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tra
 1. Premi (Start) per salvare e riavviare il 3DS
  + La console dovrebbe avviare il menu HOME dopo un po'. Se ottieni uno schermo nero per più di 5 minuti, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)

-#### Section IV - Restoring WiFi Configuration Profiles
+#### Sezione IV - Ripristino dei Profili di Connessione WiFi

 1. Avvia l'applicazione "Modalità download"
 1. Attendi finché non vedrai i due pulsanti
--- a/_pages/it_IT/uninstall-cfw.txt
+++ b/_pages/it_IT/uninstall-cfw.txt
@ -41,12 +41,12 @@ Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella carte
  + Su una console "New", (X) sarà 2
  + Su una console "Old", (X) sarà 0
 1. Seleziona il file `.app`
-1. Seleziona `NCCH Image Options`
+1. Seleziona `NCCH image options`
 1. Seleziona `Mount image to drive`
 1. Nella finestra che appare, apri la cartella `exefs`
 1. In questa cartella, scegli il file `.firm`
-1. Seleziona "Firm Image Options"
-1. Seleziona "Boot Firm"
+1. Seleziona "FIRM image options"
+1. Seleziona "Boot FIRM"
 1. Quando richiesto, scegli le opzioni per decriptare a fare una copia
 1. Ora dovrebbe avviarsi il normale menu HOME del 3DS. In tal caso, spegni la console e prosegui con la prossima sezione
  + In caso CONTRARIO, proseguire con le istruzioni **BRICKERÀ** la tua console. Dovresti entrare nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) (in Inglese) per richiedere assistenza
--- a/_pages/ja_JP/home.txt
+++ b/_pages/ja_JP/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 すべてが計画通りに進めば、データは全く失われず、導入前にあなたが使用していたすべてのもの (ゲーム、NNID、セーブデータなど) が保持されます。
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/ja_JP/uninstall-cfw.txt
+++ b/_pages/ja_JP/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/ko_KR/home.txt
+++ b/_pages/ko_KR/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + 모든 것이 계획대로 진행될 경우 시작할 때 갖고 있던 데이터가 모두 보존됩니다. (게임, NNID, 저장 데이터 등)
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ SD 카드는 [GPT가 아니라 MBR](http://www.howtogeek.com/245610/) 기반이어야 합니다. (처음 샀을 때 끼워져 있는 SD 카드는 기본적으로 MBR입니다.)
+ SD 카드는 [GPT가 아니라 MBR](http://www.howtogeek.com/245610/) 기반이어야 합니다. (처음 샀을 때 끼워져 있는 SD 카드는 기본적으로 MBR입니다.) The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/ko_KR/uninstall-cfw.txt
+++ b/_pages/ko_KR/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/ms_MY/home.txt
+++ b/_pages/ms_MY/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Jika segala-galanya mengikut perancangan, anda tidak akan kehilangan sebarang data dan akhirnya masih yang sama (games, NNID, saves, dan sebagainya akan dikekalkan).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/ms_MY/uninstall-cfw.txt
+++ b/_pages/ms_MY/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/nl_NL/home.txt
+++ b/_pages/nl_NL/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + als alles volgens plan gaat, zal je geen data verliezen en eindigen met alles waarmee je begon (spellen, NNID, saves, etc. zullen bewaard blijven).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Je SD kaart zal een [MBR, niet GPT](http://www.howtogeek.com/245610/) (de SD card die standaard komt bij je 3DS is MBR) moeten zijn.
+ Je SD kaart zal een [MBR, niet GPT](http://www.howtogeek.com/245610/) (de SD card die standaard komt bij je 3DS is MBR) moeten zijn. The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/nl_NL/uninstall-cfw.txt
+++ b/_pages/nl_NL/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/no_NO/home.txt
+++ b/_pages/no_NO/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Hvis alt går etter planen, vil du ikke miste data, og ende opp med alt som du startet med (spill, NNID, saver, osv blir bevart).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/no_NO/uninstall-cfw.txt
+++ b/_pages/no_NO/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/pl_PL/home.txt
+++ b/_pages/pl_PL/home.txt
@ -81,7 +81,7 @@ Aby zobaczyć pełną listę podpisów sighax, zobacz [ten gist](https://gist.gi
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Jeśli wszystko pójdzie zgodnie z planem, nie stracisz żadnych danych i wszystko pozostanie tak, jak przed rozpoczęciem poradnika (gry, NNID, zapisy itp. zostaną zachowane).
 + Pozostaw swoją konsolę podłączoną do ładowarki i naładowaną podczas całego procesu, aby nie dopuścić do utraty danych, lub uszkodzenia spowodowanego niespodziewanym wyłączeniem konsoli!
-+ Tabelą partycji twojej karty SD powinien być [MBR, nie GPT](http://www.howtogeek.com/245610/) (karta SD, która przychodzi z twoim urządzeniem będzie domyślnie w MBR).
+ Tabelą partycji twojej karty SD powinien być [MBR, nie GPT](http://www.howtogeek.com/245610/) (karta SD, która przychodzi z twoim urządzeniem będzie domyślnie w MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + Jeśli potrzebujesz sformatować nowo zakupioną kartę SD, możesz użyć [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) i ustawić rozmiar jednostki alokacji (Allocation Unit Size) na 32K (32768).
 + Old 2DS jest niemal identyczny jak Old 3DS pod względem oprogramowania, podczas gdy New 2DS jest zasadniczo identyczny jak New 3DS nowy pod względem oprogramowania. Kroki które mówią o "Old 3DS" można śmiało zastosować do Old 2DS, zaś wszystkie kroki opisane jako "New 3DS" pasują również do New 2DS.

--- a/_pages/pl_PL/uninstall-cfw.txt
+++ b/_pages/pl_PL/uninstall-cfw.txt
@ -41,12 +41,12 @@ Zauważ, że jeżeli będziesz miał pliki inne niż `GodMode9.firm` w folderze
  + Na "New" 3DS, zamiast (X) będzie widać "2"
  + Na zwykłym 3DS, zamiast (X) będzie widać "0"
 1. Wybierz plik `.app`
-1. Wybierz `NCCH Image Options`
+1. Select `NCCH image options`
 1. Wybierz `Mount image to drive`
 1. W oknie które się pojawi, otwórz folder `exefs`
 1. W tym folderze, wybierz plik `.firm`
-1. Select "Firm Image Options"
-1. Wybierz "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. Kiedy zostaniesz o to zapytany, wybierz odszyfrowanie (decrypt) i utworzenie kopii
 1. Konsola powinna uruchomić zwyczajne Home Menu. Jeśli tak się stało, wyłącz konsolę i przejdź do następnej sekcji
  + Jeśli zwykłe Home Menu się NIE uruchomiło, wykonanie następnych sekcji tego poradnika **NA PEWNO** uszkodzi twoją konsolę. Powinieneś dołączyć do [Serwera Nintendo Homebrew na Discordzie](https://discord.gg/MWxPgEp) i zapytać (po angielsku) czy ktoś mógłby Ci pomóc
--- a/_pages/pt_BR/home.txt
+++ b/_pages/pt_BR/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Se tudo ocorrer conforme o esperado, você não perderá dados pessoais e continuará com tudo o que tinha antes de começar (jogos, NNID, saves, etc serão preservados).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ O seu cartão SD deve ser [MBR, e não GPT](http://adrenaline.uol.com.br/forum/threads/tutorial-convertendo-mbr-gpt-e-gpt-mbr.461966/) (o cartão SD que vem com o seu dispositivo é, por padrão, MBR).
+ O seu cartão SD deve ser [MBR, e não GPT](http://adrenaline.uol.com.br/forum/threads/tutorial-convertendo-mbr-gpt-e-gpt-mbr.461966/) (o cartão SD que vem com o seu dispositivo é, por padrão, MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/pt_BR/uninstall-cfw.txt
+++ b/_pages/pt_BR/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` n
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/pt_PT/home.txt
+++ b/_pages/pt_PT/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/pt_PT/uninstall-cfw.txt
+++ b/_pages/pt_PT/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/ro_RO/home.txt
+++ b/_pages/ro_RO/home.txt
@ -81,7 +81,7 @@ Pentru o listă cu fiecare dintre semnăturile calculate de sighax, vedeți [ace
 + Acest ghid va merge pe New 3DS, Old 3DS, și 2DS în toate regiunile cu firmware 11.13.0 sau inferior.
 + Dacă totul merge așa cum trebuie, nu o să pierdeți nimic și o să ajungeți să aveți toate lucrurile cu care ați început (jocurile, NNID, salvările, etc. vor fi păstrate).
 + Țineți dispozitivul conectat și încărcat pe toată durata procedeului pentru a evita pierderea de date sau daune de la o închidere neașteptată!
-+ Cardul SD ar trebui să fie [MBR, nu GPT](http://www.howtogeek.com/245610/) (cardul SD care vine cu dispozitivul va fi MBR).
+ Cardul SD ar trebui să fie [MBR, nu GPT](http://www.howtogeek.com/245610/) (cardul SD care vine cu dispozitivul va fi MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + Dacă aveți nevoie să formatați un card SD nou, puteți să folosiți [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) și să setați Dimensiunea Unității de Alocare la 32K(32768).
 + Old 2DS este, în esenţă, identic cu Old 3DS în ceea ce priveşte software-ul, în timp ce New 2DS este identic cu New 3DS în ceea ce priveşte software-ul. Orice pas care spune "Old 3DS" se aplică de asemenea la Old 2DS, şi orice pas care spune "New 3DS" se aplică de asemenea la New 2DS.

--- a/_pages/ro_RO/uninstall-cfw.txt
+++ b/_pages/ro_RO/uninstall-cfw.txt
@ -41,12 +41,12 @@ Dacă ați modificat software critic sistemului (precum editarea meniului HOME,
  + Pe un dispozitiv din ediția "New", (X) va fi 2
  + Pe un dispozitiv din ediția "Old", (X) va fi 0
 1. Selectați fișierul `.app`
-1. Selectaţi `NCCH Image Options`
+1. Select `NCCH image options`
 1. Selectați `Mount image to drive`
 1. În fereastra care apare, deschideți folderul `exefs`
 1. În acest folder, selectați fișierul `.firm`
-1. Select "Firm Image Options"
-1. Selectați "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. Când vi se solicită, alegeţi să decriptați și să creați o copie
 1. Ar trebui să porniți în meniul HOME normal al 3DS-ului. Dacă este așa, închideți dispozitivul și continuați spre următoarea secțiune
  + Dacă NU porniți în meniul HOME normal al 3DS-ului, continuarea acestor pași va brick-ui dispozitivul  **GARANTAT**. Va trebui să vă alăturați la [Nintendo Homebrew pe Discord](https://discord.gg/MWxPgEp) şi să cereți (în engleză) ca cineva de acolo să vă asiste
--- a/_pages/ru_RU/home.txt
+++ b/_pages/ru_RU/home.txt
@ -81,7 +81,7 @@ Boot9strap имеет множество преимуществ перед др
 + Руководство предназначено для New 3DS, Old 3DS, New 2DS и Old 2DS любых регионов на прошивке 11.13.0 или ниже.
 + Если всё пройдет по плану, вы ничего не потеряете и всё останется в первоначальном состоянии (игры, сохранения, NNID).
 + Держите консоль подключенной к зарядному устройству на протяжении всего процесса, чтобы избежать потери данных или поломки в случае внезапного отключения консоли!
-+ SD-карта должна использовать [MBR, а не GPT](http://www.howtogeek.com/245610/) (англ.) (SD-карта, входящая в комплект, уже использует MBR).
+ SD-карта должна использовать [MBR, а не GPT](http://www.howtogeek.com/245610/) (англ.) (SD-карта, входящая в комплект, уже использует MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + Если вам нужно отформатировать новую SD-карту, воспользуйтесь [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) и установите Allocation Unit Size на 32КБ (32768).
 + Old 2DS программно в основном идентична Old 3DS, в то время как New 2DS программно в основном идентична New 3DS. Все шаги, предназначенные для "Old 3DS", также применимы к Old 2DS, а все шаги, предназначенные для "New 3DS", также применимы к New 2DS.

--- a/_pages/ru_RU/uninstall-cfw.txt
+++ b/_pages/ru_RU/uninstall-cfw.txt
@ -41,12 +41,12 @@ title: "Удаление кастомной прошивки"
  + На консолях версии "New" вместо (X) будет цифра 2
  + На консолях версии "Old" вместо (X) будет цифра 0
 1. Выберите файл `.app`
-1. Выберите `NCCH Image Options`
+1. Select `NCCH image options`
 1. Выберите `Mount image to drive`
 1. В открывшемся окне перейдите в папку `exefs`
 1. В этой папке выберите файл `.firm`
-1. Выберите "Firm Image Options"
-1. Выберите "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. При появлении запроса "Decrypt before boot?" согласитесь, затем выберите "Make a copy"
 1. Ваша консоль должна загрузиться в обычное меню HOME. Если это так, выключите консоль и переходите к следующей части
  + Если консоль НЕ загрузилась в обычное меню HOME, то выполнение дальнейших инструкций приведет к **БРИКУ**. Вам следует обратиться на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) кого-нибудь вам помочь
--- a/_pages/sr_SP/home.txt
+++ b/_pages/sr_SP/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/sr_SP/uninstall-cfw.txt
+++ b/_pages/sr_SP/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/sv_SE/home.txt
+++ b/_pages/sv_SE/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/sv_SE/uninstall-cfw.txt
+++ b/_pages/sv_SE/uninstall-cfw.txt
@ -41,12 +41,12 @@ Observera att om du har någon annan payload än `GodMode9.firm` i mappen `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/th_TH/home.txt
+++ b/_pages/th_TH/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/th_TH/uninstall-cfw.txt
+++ b/_pages/th_TH/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/tr_TR/home.txt
+++ b/_pages/tr_TR/home.txt
@ -81,7 +81,7 @@ Birçok oyun için yedekleme, düzenleme ve geri yükleme
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + Her şey plana uygun giderse hiçbir veri kaybetmeden başlangıçta sahip olduğunuz her şeyi koruyacaksınız (oyunlar, NNID, save dosyaları vs. korunacak).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ SD kartınız [GPT değil MBR](http://www.howtogeek.com/245610/) olmalıdır.(Cihaz içinde gelen SD kart varsayılan olarak MBR'dir).
+ SD kartınız [GPT değil MBR](http://www.howtogeek.com/245610/) olmalıdır.(Cihaz içinde gelen SD kart varsayılan olarak MBR'dir). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/tr_TR/uninstall-cfw.txt
+++ b/_pages/tr_TR/uninstall-cfw.txt
@ -41,12 +41,12 @@ SD Kartınızdaki '/luma/payloads/' klasöründe 'Godmode9.firm' dışında bir
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/uk_UA/home.txt
+++ b/_pages/uk_UA/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/uk_UA/uninstall-cfw.txt
+++ b/_pages/uk_UA/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/vi_VN/home.txt
+++ b/_pages/vi_VN/home.txt
@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
 + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
 + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.

--- a/_pages/vi_VN/uninstall-cfw.txt
+++ b/_pages/vi_VN/uninstall-cfw.txt
@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
  + On a "New" edition console, the (X) will instead be 2
  + On an "Old" edition console, the (X) will instead be 0
 1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
 1. Select `Mount image to drive`
 1. In the window that appears, open the `exefs` folder
 1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. When prompted, choose to decrypt and make a copy
 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
  + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
--- a/_pages/zh_CN/home.txt
+++ b/_pages/zh_CN/home.txt
@ -81,7 +81,7 @@ Boot9strap 拥有许多其他自制固件所没有的优点，因此我们推荐
 + 此教程对所有区域且固件版本号小于等于 11.13.0 的 New 3DS、3DS、New 2DS 和 2DS 有效。
 + 如果一切顺利，在安装完自制系统后你不会丢失任何数据（包括游戏、NNID、存档等）。
 + 在进行所有操作时请将主机充电，避免意外关机造成数据丢失或损坏！
-+ 你的 SD 卡的分区表格式必须是 [MBR，而不是 GPT](http://www.howtogeek.com/245610/)（原厂 SD 卡的分区表格式默认是 MBR）。
+ 你的 SD 卡的分区表格式必须是 [MBR，而不是 GPT](http://www.howtogeek.com/245610/)（原厂 SD 卡的分区表格式默认是 MBR）。 The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + 如果你需要格式化一张新的 SD 卡，可以使用 [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm)，并将“分配单元大小（Allocation Unit Size）”设置为 32K (32768)。
 + 老型号的 2DS 和 3DS 使用的系统软件几乎是一模一样的，New 2DS 和 New 3DS也是一样的道理。 任何 “老型号的 3DS” 的步骤也适用于“老型号 2DS”，任何 “New 3DS” 的步骤也适用于 “New 2DS”。

--- a/_pages/zh_CN/uninstall-cfw.txt
+++ b/_pages/zh_CN/uninstall-cfw.txt
@ -42,12 +42,12 @@ title: "卸载自制固件"
  + 在 “New 3DS” 主机上，(X) 应该是2
  + 在“老型号的3DS” 上，(X) 应该是0
 1. 选择 `.app` 文件
-1. 选择 `NCCH Image Options`
+1. 选择 `NCCH image options`
 1. 选择 `Mount image to drive`
 1. 在弹出的窗口中，打开 `exefs` 文件夹
 1. 在此文件夹中，选中 `.firm` 文件
-1. 选择 “Firm Image Options”
-1. 选择 “Boot Firm”
+1. 选择 “FIRM image options”
+1. 选择 “Boot FIRM”
 1. 出现提示时，按下“A”键解密并制作副本
 1. 你应该会启动到正常的 3DS 主菜单。 如果是这样，关闭你的主机并继续下一章节。
  + 如果你没有进入到正常的 3DS主菜单，继续下面的步骤将 **会** 导致你的机器变砖。 请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文来请求支援。你也可以到译者的<a href="https://jq.qq.com/?_wv=1027&k=5CfEA4c">QQ群</a>寻求帮助，群号为 942052497。
--- a/_pages/zh_TW/home.txt
+++ b/_pages/zh_TW/home.txt
@ -84,7 +84,7 @@ boot9strap 是目前最新且最棒的自製韌體啟動方式，有點像 Wii
 + This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
 + 如果一切都順利的話，您將不會失去任何資料 (像是遊戲、NNID、存檔... 等都會被留下)。
 + 請在充電的情況下改機，以確保途中不會因為電力關係而突然關機造成資料遺失或甚至毀損！
-+ 您的 SD 卡應為 [MBR 格式，而非 GPT](http://www.howtogeek.com/245610/) (原廠 SD 卡一律都是以 MBR 格式出廠)。
+ 您的 SD 卡應為 [MBR 格式，而非 GPT](http://www.howtogeek.com/245610/) (原廠 SD 卡一律都是以 MBR 格式出廠)。 The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
 + 如果您需要格式化一張新的 SD 卡，您可使用 [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) 並且將其配置單位設為 32K (32768)。
 + 舊型 2DS 與舊型 3DS 的軟體是幾乎一樣的；New 2DS 與 New 3DS 也是同樣的道理。 因此，任何提及「舊型 3DS」的步驟將套用於「舊型 2DS」；而任何提及「New 3DS」的步驟也將套用於「New 2DS」。

--- a/_pages/zh_TW/uninstall-cfw.txt
+++ b/_pages/zh_TW/uninstall-cfw.txt
@ -41,12 +41,12 @@ title: "卸載自製韌體"
  + 在『New 3DS』主機上，「X」應為2
  + 在『舊版 3DS』主機上，「X」應為0
 1. 選擇 `.app` 檔案
-1. 選擇 `NCCH Image Options`
+1. Select `NCCH image options`
 1. 選擇 `Mount image to drive`
 1. 在出現的視窗中，打開 `exefs` 資料夾
 1. 在此資料夾內，選中 `.firm` 檔案
-1. Select "Firm Image Options"
-1. 選擇『Boot Firm』
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
 1. 出現提示時，按A選擇解密並製作副本
 1. 您應該會啟動到正常的 3DS 主選單。 如果是這樣，請關閉設備並繼續下一節
  + 如果您沒有進入到正常的 3DS 主選單，繼續下面的章節 **將** 導致您的主機變磚。 請加入 [Discord 中的 Nintendo Homebrew 伺服器](https://discord.gg/MWxPgEp) 並使用英文尋求協助