Various changes to enhance understanding; link fixes
This commit aims to make guide wording on some pages more consistent to make it easier to understand. A warning has been added above each Legacy Method page, and the links to their respective tools have been fixed.
This commit is contained in:
lily
parent
314e63a425
commit
50e7dfac70
7 changed files with 32 additions and 25 deletions
|
|
@ -78,7 +78,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
|
|||
|
||||
+ **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
|
||||
+ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup).
|
||||
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.14.0 or below.
|
||||
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0).
|
||||
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
|
||||
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
|
||||
+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
|
||||
|
|
|
|||
|
|
@ -4,6 +4,9 @@ title: "Homebrew Launcher (PicHaxx)"
|
|||
|
||||
{% include toc title="Table of Contents" %}
|
||||
|
||||
This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
|
||||
{: .notice--warning}
|
||||
|
||||
### Required Reading
|
||||
|
||||
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
|
||||
|
|
@ -40,14 +43,14 @@ If you already have Pokemon Picross, this process will overwrite your game's sav
|
|||
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card
|
||||
+ The `<ID0>` will be the same one that you used in [Seedminer](seedminer)
|
||||
+ The `<ID1>` is a 32 character long folder inside of the `<ID0>`
|
||||
1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card
|
||||
1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card
|
||||
+ Overwrite the old save file when prompted
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
1. Launch "Pokemon Picross"
|
||||
1. If the exploit was successful, your device will have loaded the Homebrew Launcher
|
||||
+ You may see an error stating there are no applications found.
|
||||
1. Power off your device.
|
||||
+ You may see an error stating there are no applications found
|
||||
1. Power off your device
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)"
|
|||
|
||||
{% include toc title="Table of Contents" %}
|
||||
|
||||
This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
|
||||
{: .notice--warning}
|
||||
|
||||
### Required Reading
|
||||
|
||||
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
|
||||
|
|
@ -12,7 +15,7 @@ This is a currently working implementation of the "FIRM partitions known-plainte
|
|||
|
||||
### What You Need
|
||||
|
||||
* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper))
|
||||
* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3))
|
||||
* Your `movable.sed` file from completing [Seedminer](seedminer)
|
||||
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
|
||||
* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
|
||||
|
|
@ -28,7 +31,7 @@ This is a currently working implementation of the "FIRM partitions known-plainte
|
|||
|
||||
#### Section II - Fredtool
|
||||
|
||||
1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer
|
||||
1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer
|
||||
1. Select your `movable.sed` file for the "Your movable.sed" field
|
||||
1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field
|
||||
1. Complete the "I'm not a robot" captcha
|
||||
|
|
|
|||
|
|
@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)"
|
|||
|
||||
{% include toc title="Table of Contents" %}
|
||||
|
||||
This page has been marked as a Legacy Method because it has been superseded by faster, safer methods. You should only follow it if you are unable to follow [Installing boot9strap (USM)](installing-boot9strap-(usm)).
|
||||
{: .notice--warning}
|
||||
|
||||
### Required Reading
|
||||
|
||||
We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.
|
||||
|
|
@ -25,7 +28,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
|
|||
1. Insert your SD card into your computer
|
||||
1. Copy your `movable.sed` file to the root of your SD card
|
||||
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
|
||||
1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card
|
||||
1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card
|
||||
1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card
|
||||
1. Copy `frogcert.bin` to the root of your SD card
|
||||
1. Reinsert your SD card into your device
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov
|
|||
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
|
||||
|
||||
If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
|
||||
{: .notice--danger}
|
||||
{: .notice--warning}
|
||||
|
||||
### What You Need
|
||||
|
||||
|
|
@ -26,23 +26,23 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
|
|||
|
||||
#### Section I - Prep Work
|
||||
|
||||
1. If your device is powered on, power off your device
|
||||
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
|
||||
+ If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
|
||||
1. Upload your movable.sed using the "Choose File" option
|
||||
1. Click "Download unSAFE_MODE-bb3 archive"
|
||||
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
|
||||
1. If your console is powered on, power off your console
|
||||
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
|
||||
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
|
||||
1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card
|
||||
1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
|
||||
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
|
||||
+ The `<ID0>` will be the same one that you used in [Seedminer](seedminer)
|
||||
+ The `<ID1>` is a 32 character long folder inside of the `<ID0>`
|
||||
+ If `Nintendo DSiWare` does not exist, create it inside of the `<ID1>`
|
||||
1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC
|
||||
+ This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups
|
||||
1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder
|
||||
1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder
|
||||
|
||||
#### Section II - BannerBomb3
|
||||
|
||||
|
|
@ -57,15 +57,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
|
|||
|
||||
#### Section III - unSAFE_MODE
|
||||
|
||||
1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
|
||||
+ Keep holding the buttons until the console boots into Safe Mode
|
||||
1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
|
||||
+ Keep holding the buttons until the device boots into Safe Mode
|
||||
1. Press "OK" to accept the update
|
||||
+ There is no update. This is part of the exploit
|
||||
1. Press "I accept" to accept the terms and conditions
|
||||
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
|
||||
1. When asked "Would you like to configure Internet settings?", select "Yes"
|
||||
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
|
||||
+ Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
|
||||
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
|
||||
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
|
||||
|
||||
#### Section IV - Configuring Luma3DS
|
||||
|
|
@ -82,12 +82,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
|
|||
1. Navigate to `Data Management` -> `DSiWare`
|
||||
1. Click on the SD Card section
|
||||
+ Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
|
||||
1. Power your system off
|
||||
1. Power off your device
|
||||
1. Insert your SD card into your computer
|
||||
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card
|
||||
+ This `<ID0>` will be the same one that you used in [Seedminer](seedminer)
|
||||
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
|
||||
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
|
||||
1. Continue to Finalizing Setup
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -35,7 +35,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
|
|||
+ This folder name is also known as your "ID0"
|
||||
1. Power on your device
|
||||
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
|
||||
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
|
||||
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues)
|
||||
1. Find your Mii profile, then find the "Friend Code" field on the top screen
|
||||
|
||||
#### Section II - Seedminer
|
||||
|
|
@ -48,14 +48,14 @@ This method uses a powerful graphics card to perform the calculations needed. A
|
|||
1. Paste your device's 32 character long folder name into the "Your ID0" field
|
||||
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
|
||||
1. Select "Go"
|
||||
+ If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section.
|
||||
+ If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section
|
||||
1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console
|
||||
1. Wait for the site to update
|
||||
+ If it does not, wait a few minutes before refreshing the page once
|
||||
1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button
|
||||
1. Wait for the remainder of the process to complete
|
||||
+ This is usually fast (1-5 minutes) but in some cases, can take up to half an hour.
|
||||
+ During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue.
|
||||
+ This is usually fast (1-5 minutes) but in some cases, can take up to half an hour
|
||||
+ During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue
|
||||
+ If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
|
||||
1. When the process has completed, download your `movable.sed` file from the site
|
||||
+ Keep this file as you will need it in the upcoming pages
|
||||
|
|
@ -66,7 +66,7 @@ ___
|
|||
|
||||
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
|
||||
|
||||
This method is compatible with all regions except CHN and TWN.
|
||||
This method is compatible with all regions except CHN and TWN, and requires working shoulder buttons.
|
||||
|
||||
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
|
||||
{: .notice--primary}
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ sitemap: false
|
|||
+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
|
||||
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
|
||||
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
|
||||
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
|
||||
+ [Installing boot9strap (USM)](installing-boot9strap-(usm))
|
||||
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
|
||||
+ [Move EmuNAND](move-emunand)
|
||||
+ [ntrboot](ntrboot)
|
||||
|
|
|
|||
Loading…
Reference in a new issue