consistent capitalization

2018-02-16 22:19:13 -05:00 · 2018-02-16 22:19:13 -05:00 · 5fcd2da2ea
commit 5fcd2da2ea
parent 51569593ec
27 changed files with 32 additions and 32 deletions
--- a/_pages/en_US/a9lh-to-b9s.txt
+++ b/_pages/en_US/a9lh-to-b9s.txt
@ -31,7 +31,7 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte

 <div class="notice--danger">{{ notice-1 | markdownify }}</div>

-### What you need
+### What You Need

 Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below.
 {: .notice--info}
--- a/_pages/en_US/cart-update.txt
+++ b/_pages/en_US/cart-update.txt
@ -22,7 +22,7 @@ This also means that a cartridge update will NOT install a browser if you do not
 **Updating with a game cartridge containing the version 9.9.0 or above will remove your browser until a standard online update is performed!**
 {: .notice--danger}

-### What you need
+### What You Need

 * A game cartridge that [contains the version](http://www.3dsdb.com/) you wish to update to

--- a/_pages/en_US/ctrtransfer.txt
+++ b/_pages/en_US/ctrtransfer.txt
@ -15,7 +15,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 You MUST have already installed Luma3DS and boot9strap to use this.
 {: .notice--danger}

-### What you need
+### What You Need

 * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest){:target="_blank"}
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest){:target="_blank"} *(the`.3dsx` file)*
--- a/_pages/en_US/f3-(linux).txt
+++ b/_pages/en_US/f3-(linux).txt
@ -12,7 +12,7 @@ Depending on the size of your SD card and the speed of your computer, this proce

 This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages.

-### What you need
+### What You Need

 * The latest version of [F3](https://github.com/AltraMayor/f3/archive/v6.0.zip)

--- a/_pages/en_US/f3x-(mac).txt
+++ b/_pages/en_US/f3x-(mac).txt
@ -12,7 +12,7 @@ Depending on the size of your SD card and the speed of your computer, this proce

 This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages.

-### What you need
+### What You Need

 * The latest release of [F3X](https://github.com/insidegui/F3X/releases/latest){:target="_blank"}

--- a/_pages/en_US/finalizing-setup.txt
+++ b/_pages/en_US/finalizing-setup.txt
@ -19,7 +19,7 @@ During this process, we also setup programs such as the following:
 +  **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
 +  **Homebrew Launcher Loader** *(launches the Homebrew Launcher)*

-### What you need
+### What You Need

 * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest){:target="_blank"} *(the `.cia` file)*
 * The latest release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/latest){:target="_blank"} *(the `.cia` file)*
--- a/_pages/en_US/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/en_US/flashing-ntrboot-(3ds-multi-system).txt
@ -13,7 +13,7 @@ This method requires temporary access to a second 3DS family device that is alre
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}

-### What you need
+### What You Need

 * Your ntrboot compatible flashcart
 * Two 3DS family devices 
--- a/_pages/en_US/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/en_US/flashing-ntrboot-(3ds-single-system).txt
@ -13,7 +13,7 @@ This method requires nothing more than your stock unhacked 3DS and a compatible
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}

-### What you need
+### What You Need

 * Your ntrboot compatible flashcart
 * The latest release of [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest){:target="_blank"} *(`dsi` flasher; not the standard flasher)*
--- a/_pages/en_US/flashing-ntrboot-(dsi).txt
+++ b/_pages/en_US/flashing-ntrboot-(dsi).txt
@ -13,7 +13,7 @@ This method requires temporary access to a Nintendo DSi that is compatible with
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}

-### What you need
+### What You Need

 * Your ntrboot compatible flashcart
 * Two devices 
--- a/_pages/en_US/flashing-ntrboot-(nds).txt
+++ b/_pages/en_US/flashing-ntrboot-(nds).txt
@ -13,7 +13,7 @@ This method requires temporary access to a Nintendo DS or Nintendo DS Lite that
 Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
 {: .notice--danger}

-### What you need
+### What You Need

 * Your ntrboot compatible flashcart
 * Two devices 
--- a/_pages/en_US/godmode9-usage.txt
+++ b/_pages/en_US/godmode9-usage.txt
@ -17,7 +17,7 @@ GodMode9 is powerful software that has the capability to modify essentially anyt
 Some of the instructions below are only applicable to the latest version of GodMode9, and as such you should follow this section to update your copy before continuing. Overwrite any existing files.
 {: .notice--info}

-### What you need
+### What You Need

 * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest){:target="_blank"}

@ -213,7 +213,7 @@ To identify a `<TitleID>.gbavc.sav` file's Title ID, you can get a listing of al

 ## Removing an NNID without formatting your device

-### What you need
+### What You Need

 * [`remove_nnid.gm9`]({{ "/gm9_scripts/remove_nnid.gm9" | absolute_url }}){:download}

--- a/_pages/en_US/h2testw-(windows).txt
+++ b/_pages/en_US/h2testw-(windows).txt
@ -12,7 +12,7 @@ Depending on the size of your SD card and the speed of your computer, this proce

 This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages.

-### What you need
+### What You Need

 * The latest version of [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip)

--- a/_pages/en_US/homebrew-launcher-(alternatives).txt
+++ b/_pages/en_US/homebrew-launcher-(alternatives).txt
@ -12,7 +12,7 @@ If browserhax is not an option (see the chart below), you do not already own any

 Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required.

-### What you need
+### What You Need

 * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases)
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"}
--- a/_pages/en_US/homebrew-launcher-(soundhax).txt
+++ b/_pages/en_US/homebrew-launcher-(soundhax).txt
@ -21,7 +21,7 @@ This means that using a cartridge update from a version containing an older Nint

 <div class="notice--warning">{{ notice-1 | markdownify }}</div>

-### What you need
+### What You Need

 * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases)
 * The latest release of [Soundhax](http://soundhax.com/) *(for your device and region)*
--- a/_pages/en_US/installing-boot9strap-(2xrsa).txt
+++ b/_pages/en_US/installing-boot9strap-(2xrsa).txt
@ -4,7 +4,7 @@ title: "Installing boot9strap (2xrsa)"

 {% include toc title="Table of Contents" %}

-### What you need
+### What You Need

 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"}
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
--- a/_pages/en_US/installing-boot9strap-(browser).txt
+++ b/_pages/en_US/installing-boot9strap-(browser).txt
@ -8,7 +8,7 @@ title: "Installing boot9strap (Browser)"

 If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).

-### What you need
+### What You Need

 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"}
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
--- a/_pages/en_US/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/en_US/installing-boot9strap-(dsiware-game-injection).txt
@ -15,7 +15,7 @@ Before proceeding, ensure you have read all of the notices and warnings on [Inst
 If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
 {: .notice--danger}

-### What you need
+### What You Need

 * Two 3DS family devices
  + **The source 3DS**: the device running boot9strap *on the latest version*
--- a/_pages/en_US/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/en_US/installing-boot9strap-(dsiware-save-injection).txt
@ -15,7 +15,7 @@ Before proceeding, ensure you have read all of the notices and warnings on [Inst
 If you do not use the correct `.firm` corresponding to the target 3DS, you will BRICK! Ensure you download and use the correct one!
 {: .notice--danger}

-### What you need
+### What You Need

 * Two 3DS family devices
  + **The source 3DS**: the device running boot9strap *on the latest version*
--- a/_pages/en_US/installing-boot9strap-(hardmod).txt
+++ b/_pages/en_US/installing-boot9strap-(hardmod).txt
@ -14,7 +14,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th

 This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for.

-### What you need
+### What You Need

 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
--- a/_pages/en_US/installing-boot9strap-(mset).txt
+++ b/_pages/en_US/installing-boot9strap-(mset).txt
@ -8,7 +8,7 @@ title: "Installing boot9strap (MSET)"

 If you have already hacked your device before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).

-### What you need
+### What You Need

 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"}
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
--- a/_pages/en_US/installing-boot9strap-(ntrboot).txt
+++ b/_pages/en_US/installing-boot9strap-(ntrboot).txt
@ -10,7 +10,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th

 {% include toc title="Table of Contents" %}

-### What you need
+### What You Need

 * A magnet that triggers the sleep mode of your device (if using a folding style device)
 * Your ntrboot flashed flashcart
@ -87,7 +87,7 @@ Do not follow this section until you have completed the rest of the instructions

 #### Section V - Removing ntrboot

-##### What you need
+##### What You Need

 * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest){:target="_blank"}
 * The flashrom backup corresponding to your flashcart    
--- a/_pages/en_US/move-emunand.txt
+++ b/_pages/en_US/move-emunand.txt
@ -13,7 +13,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
 You MUST have already installed Luma3DS and boot9strap to use this.
 {: .notice--danger}

-### What you need
+### What You Need

 * An existing EmuNAND
 * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest){:target="_blank"}
--- a/_pages/en_US/ntr-and-cubic-ninja.txt
+++ b/_pages/en_US/ntr-and-cubic-ninja.txt
@ -11,7 +11,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
 NTR Cubic Ninja will work for JPN New 3DS ONLY!
 {: .notice--warning}

-### What you need
+### What You Need

 * [JPN Cubic Ninja](https://www.amazon.com/dp/B004QL7M0A)
 * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases)
--- a/_pages/en_US/region-changing.txt
+++ b/_pages/en_US/region-changing.txt
@ -27,7 +27,7 @@ Region changing using CTRTransfer (which this method uses) seems to cause reboot
 You MUST have already installed Luma3DS and boot9strap to use this.
 {: .notice--danger}

-### What you need
+### What You Need

 * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest){:target="_blank"}
 * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest){:target="_blank"} *(the`.3dsx` file)*
--- a/_pages/en_US/troubleshooting.txt
+++ b/_pages/en_US/troubleshooting.txt
@ -14,7 +14,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th

 ## DSi / DS functionality is broken after completing the guide

-### What you need
+### What You Need

 * The TWL_FIRM `.cia` for your device
    + <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [`New_3DS TWL_FIRM - v9936.cia`](magnet:?xt=urn:btih:eab8558c97b18b1f329a2bfcc3c899b84c082a27&dn=New%5F3DS%20TWL%5FFIRM%20-%20v9936.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
@ -45,7 +45,7 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th

 ## Removing an NNID without formatting your device

-### What you need
+### What You Need

 * [`remove_nnid.gm9`]({{ "/gm9_scripts/remove_nnid.gm9" | absolute_url }}){:download}

@ -109,7 +109,7 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras

 ## Black screen on SysNAND boot

-### What you need
+### What You Need

 * [`remove_extdata.gm9`]({{ "/gm9_scripts/remove_extdata.gm9" | absolute_url }}){:download}

@ -145,7 +145,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma

 ## Black screen on SysNAND boot after Installing boot9strap

-### What you need
+### What You Need

 * [`remove_extdata.gm9`]({{ "/gm9_scripts/remove_extdata.gm9" | absolute_url }}){:download}

--- a/_pages/en_US/uninstall-cfw.txt
+++ b/_pages/en_US/uninstall-cfw.txt
@ -17,7 +17,7 @@ This will not affect your NNID, any legitimately purchased games, or any saves f

 Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. 

-### What you need
+### What You Need

 * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest){:target="_blank"}
 * The uninstaller script corresponding to your device:
--- a/_pages/en_US/updating-b9s.txt
+++ b/_pages/en_US/updating-b9s.txt
@ -24,7 +24,7 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte

 <div class="notice--danger">{{ notice-1 | markdownify }}</div>

-### What you need
+### What You Need

 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest){:target="_blank"}
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest){:target="_blank"} *(standard boot9strap; not the `devkit` file, not the `ntr` file)*