Fix incorrect usage of "mount point"

"Mount point" is actually the directory on which the device appears when mounted. This changes the usage to "device name" everywhere.
This commit is contained in:
manojka 2022-05-17 22:05:31 -07:00 committed by GitHub
parent f2467f8ffa
commit 5fd775ebfd
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23

View file

@ -24,13 +24,13 @@ NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 3,8G 0 disk
└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
```
1. Take note of the device mount point. In our example above, it was `mmcblk0p1`
1. Take note of the device name. In our example above, it was `mmcblk0p1`
+ If `RO` is set to 1, make sure the lock switch is not slid down
1. Hit CTRL + C to exit the menu
1. Type in the following for your SD card:
- 2GB or lower: `sudo mkfs.fat /dev/(device mount point from above) -s 64 -F 16`
- 2GB or lower: `sudo mkfs.fat /dev/(device name from above) -s 64 -F 16`
- This creates a single FAT16 partition with 32 KB cluster size on the SD card
- 4GB - 128GB: `sudo mkfs.fat /dev/(device mount point from above) -s 64 -F 32`
- 4GB - 128GB: `sudo mkfs.fat /dev/(device name from above) -s 64 -F 32`
- This creates a single FAT32 partition with 32 KB cluster size on the SD card
- 128GB or higher: `sudo mkfs.fat /dev/(device mount point from above) -s 128 -F 32`
- 128GB or higher: `sudo mkfs.fat /dev/(device name from above) -s 128 -F 32`
- This creates a single FAT32 partition with 64 KB cluster size on the SD card