diff --git a/_pages/en_US/Decrypt9-(Homebrew-Launcher).txt b/_pages/en_US/Decrypt9-(Homebrew-Launcher).txt index df4569bb5b..67b5738a8b 100644 --- a/_pages/en_US/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/en_US/Decrypt9-(Homebrew-Launcher).txt @@ -13,12 +13,11 @@ permalink: /decrypt9-(homebrew-launcher).html #### Instructions 1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -3. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -5. Reinsert your SD card into your 3DS -6. Enter the Homebrew Launcher using an entrypoint (such as [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))) +2. Create a folder named `files9` on the root of your SD card if it does not already exist +3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card +5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` +6. Reinsert your SD card into your 3DS 7. Launch fasthax from the list of homebrew + You may have to scroll down to see this option 8. Once it has completed, press (Start) to exit back to the Homebrew Launcher diff --git a/_pages/en_US/Installing-arm9loaderhax.txt b/_pages/en_US/Installing-arm9loaderhax.txt index 2c52978dcf..a4029d5b91 100644 --- a/_pages/en_US/Installing-arm9loaderhax.txt +++ b/_pages/en_US/Installing-arm9loaderhax.txt @@ -118,16 +118,16 @@ If, before following this guide, you already had an EmuNAND setup and would like {: .notice--info} 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore" -4. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` -5. Press (Start) to reboot +2. Go to "SysNAND Backup/Restore" +3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin` +4. Press (Start) to reboot + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) -6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: +5. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" +6. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + Updates while using A9LH + Luma (what you have) are safe, stop asking about it + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. + If this gives you an error, set your DNS settings to "auto" @@ -136,12 +136,12 @@ If, before following this guide, you already had an EmuNAND setup and would like ##### Section V - Injecting FBI 1. Boot your device while holding (Start) to enter Hourglass9 -3. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -4. Press (B), then select the "Health&Safety Inject" option -5. Select the FBI injectable `.app` for your region -6. Press (A) and confirm to inject -7. Press (Start) to reboot -8. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** +3. Press (B), then select the "Health&Safety Inject" option +4. Select the FBI injectable `.app` for your region +5. Press (A) and confirm to inject +6. Press (Start) to reboot +7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) ##### Section VI - Finalizing setup diff --git a/_pages/en_US/Move-EmuNAND.txt b/_pages/en_US/Move-EmuNAND.txt index 29ce371201..0493bcdc6d 100644 --- a/_pages/en_US/Move-EmuNAND.txt +++ b/_pages/en_US/Move-EmuNAND.txt @@ -23,30 +23,30 @@ You will LOSE your GBA VC and DSiWare saves! 1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` 2. Reinsert your SD card into your 3DS 3. Open Hourglass9 from arm9loaderhax by holding (Start) on boot -5. Go to "EmuNAND Backup/Restore", then select the "EmuNAND Backup" option to backup your EmuNAND to `NANDmin_emu.bin` -6. Press (B) to get back to the main menu -7. Go to "SysNAND Backup/Restore", then select the "SysNAND Restore (keep a9lh)" option to restore your SysNAND from `NANDmin_emu.bin` -8. Press (Select) to eject your SD card -9. Put your SD card in your computer, then copy `NANDmin_emu.bin` and `NANDmin_emu.bin.sha` from the `/files9/` folder on your SD card to a safe location +4. Go to "EmuNAND Backup/Restore", then select the "EmuNAND Backup" option to backup your EmuNAND to `NANDmin_emu.bin` +5. Press (B) to get back to the main menu +6. Go to "SysNAND Backup/Restore", then select the "SysNAND Restore (keep a9lh)" option to restore your SysNAND from `NANDmin_emu.bin` +7. Press (Select) to eject your SD card +8. Put your SD card in your computer, then copy `NANDmin_emu.bin` and `NANDmin_emu.bin.sha` from the `/files9/` folder on your SD card to a safe location + Make backups in multiple locations + This backup will save you from a brick if anything goes wrong in the future + **Your backup should match one of the sizes on [this](nand-size) page; if it does not, you should delete it and make a new one!** -10. Delete `NANDmin_emu.bin` from the `/files9/` folder on your SD card after copying it -11. **Backup every file on your SD card to a folder on your computer; all files will be deleted in the following steps** -12. Reinsert your SD card into your 3DS -13. Press (Start) to reboot while holding (Up) to open GodMode9 -14. Press the (Home) button to bring up the action menu -15. Select "SD format menu" -16. Press (A) to confirm -17. Select "No EmuNAND" -18. Select "Auto" -19. Enter the prompted button combination to confirm -20. Hold (R) and press (B) at the same time to eject your SD card -21. Put your SD card in your computer, then copy all your files back into it +9. Delete `NANDmin_emu.bin` from the `/files9/` folder on your SD card after copying it +10. **Backup every file on your SD card to a folder on your computer; all files will be deleted in the following steps** +11. Reinsert your SD card into your 3DS +12. Press (Start) to reboot while holding (Up) to open GodMode9 +13. Press the (Home) button to bring up the action menu +14. Select "SD format menu" +15. Press (A) to confirm +16. Select "No EmuNAND" +17. Select "Auto" +18. Enter the prompted button combination to confirm +19. Hold (R) and press (B) at the same time to eject your SD card +20. Put your SD card in your computer, then copy all your files back into it + Ensure you replace the `arm9loaderhax.bin` file on the SD card with the one from your backup -22. Reinsert your SD card into your 3DS -23. Press (A) to remount your SD card -24. Press (Start) to reboot! -25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +21. Reinsert your SD card into your 3DS +22. Press (A) to remount your SD card +23. Press (Start) to reboot! +24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) Return to [Installing arm9loaderhax](installing-arm9loaderhax).