New Crowdin translations (#1430)
This commit is contained in:
Devon Maloney
Plailect
parent
189dbeb27e
commit
6e90557cb0
114 changed files with 228 additions and 294 deletions
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Select "Move path(s)"
|
||||
1. The uppercase extension files will have been moved to the `newdir` directory
|
||||
1. Press (Start) to reboot your device
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Select "Move path(s)"
|
||||
1. The uppercase extension files will have been moved to the `newdir` directory
|
||||
1. Press (Start) to reboot your device
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Select "Move path(s)"
|
||||
1. The uppercase extension files will have been moved to the `newdir` directory
|
||||
1. Press (Start) to reboot your device
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Select "Move path(s)"
|
||||
1. The uppercase extension files will have been moved to the `newdir` directory
|
||||
1. Press (Start) to reboot your device
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Select "Move path(s)"
|
||||
1. The uppercase extension files will have been moved to the `newdir` directory
|
||||
1. Press (Start) to reboot your device
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm
|
|||
1. Kopiere `setup_ctrnand_luma3ds.gm9` nach `/gm9/scripts/` auf deiner SD-Karte
|
||||
1. Kopiere `cleanup_sd_card.gm9` in den `/gm9/scripts/` Ordner auf deiner SD-Karte
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
|
||||
1. **Nur New 3DS Nutzer:** Kopiere `secret_sector.bin` in den `/boot9strap/` Ordner auf deiner SD-Karte
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in
|
|||
1. Drücke (A) um fortzufahren
|
||||
1. Drücke (R) und (B) gleichzeitig um die SD-Karte auszuwerfen
|
||||
1. Stecke deine SD-Karte in deinen Computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Erstelle Backup Dateien an mehreren Orten (USB-Stick, PC, Externe Festplatte, Online-Speicher, etc.)
|
||||
+ Diese Sicherheitskopie wird dich vor einem Brick schützen, falls in der Zukunft etwas schief gehen sollte
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Stecke deine SD-Karte nun wieder in deinen 3DS
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
|
|||
1. Wähle "Install boot9strap" und bestätige es
|
||||
1. Schließe b9stool, schalte dann dein Gerät aus
|
||||
+ Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
|
||||
1. Schalte den **Ziel-3DS** ein
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Drücke (Start) zum Speichern und neustarten
|
||||
+ Falls ein Fehler angezeigt wird, fahre einfach mit der nächsten Seite fort
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma
|
|||
1. Wähle "Move path(s)" aus
|
||||
1. Die Dateien mit den großgeschriebenen Endungen wurden in den ´newdir´ Ordner verschoben
|
||||
1. Dücke auf (Start), um die Konsole neu zu starten
|
||||
1. Kehre zurück zu [Setup fertigstellen](finalizing-setup) und versuche die FBI-Injektion erneut
|
||||
1. Wenn das immer noch nicht funktioniert, verschiebe die Dateien mit den Endungen die NUR Großbuchstaben enthalten zurück in den `content`Ordner, und die die nur Kleinbuchstaben als Endung haben in den neuen `newdir`Ordner. Kehre dann zurück zu [Setup fertigstellen](finalizing-setup)
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Πατήστε (A) για να συνεχίσετε
|
||||
1. Κρατήστε πατημένο το (R) και πατήστε ταυτόχρονα το (B) για να αφαιρέσετε την κάρτα SD
|
||||
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ Αυτά τα αντίγραφα ασφαλείας θα σας σώσουν από την αχρήστευση της συσκευής σε περίπτωση που κάτι πάει στραβά
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Επιλέξτε "Move path(s)"
|
||||
1. Τα αρχεία με την επέκταση κεφαλαίων γραμμάτων έχουν μεταφερθεί στον κατάλογο `newdir`
|
||||
1. Press (Start) to reboot your device
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -70,7 +70,6 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card.
|
|||
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to th' `/boot9strap/` folder on ye SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -126,9 +126,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert ye SD card into ye computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert ye SD card into ye device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use th' (A) button 'n th' D-Pad to turn on th' followin':
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save 'n reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo repetido e
|
|||
1. Copia `setup_ctrnand_luma3ds.gm9` a la carpeta `/gm9/scripts/` en tu tarjeta SD
|
||||
1. Copia `cleanup_sd_card.gm9` a la carpeta `/gm9/scripts/` en tu tarjeta SD
|
||||
1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la carpeta`/luma/payloads/` en tu tarjeta SD
|
||||
1. Renombra `SafeB9SInstaller.bin` en la carpeta `/luma/payloads/` de tu tarjeta SD a `start_SafeB9SInstaller.bin`
|
||||
1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de `boot9strap` a la carpeta `/boot9strap/` en tu tarjeta SD
|
||||
1. **Sólo para usuarios de New 3DS:** Copia `secret_sector.bin` a la carpeta `/boot9strap/`en tu tarjeta SD
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
|
|||
1. Presiona (A) para continuar
|
||||
1. Mantén (R) y presiona (B) al mismo tiempo para extraer la SD
|
||||
1. Inserta tu tarjeta SD en tu computadora
|
||||
1. Copia `<date>_<númerodeserie>_sysnand###.bin` desde la carpeta `/gm9/out/` en tu tarjeta SD a una ubicación segura en tu computadora
|
||||
1. Copia `<fecha>_<númerodeserie>_sysnand###.bin` y `essential.exefs` desde la carpeta `/gm9/out/` en tu tarjeta SD a una ubicación segura en tu computadora
|
||||
+ Haz copias de seguridad en múltiples sitios (como por ejemplo, en un pendrive o almacenamiento online)
|
||||
+ Esta copia de seguridad puede salvarte de un brick si algo va mal en el futuro
|
||||
+ Estos respaldos podrán prevenir que se inutilice la consola y/o ayudarte a recuperar archivos de la memoria de tu consola si algo sale mal en el futuro
|
||||
1. Elimina el archivo `<fecha>_<númerodeserie>_sysnand_###.bin` de la carpeta `/gm9/out/` de tu tarjeta SD después de haberlo copiado
|
||||
1. Vuelve a insertar tu tarjeta SD en tu consola
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
|
|||
1. Selecciona "Install boot9strap" y confirma
|
||||
1. Sal de b9sTool, luego apaga tu consola
|
||||
+ Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
|
||||
1. Enciende **la 3DS de destino**
|
||||
|
||||
#### Sección VII - Configuración de Luma3DS
|
||||
|
||||
1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS
|
||||
+ Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Enciende tu consola mientras mantienes presionado (Select) para ingresar al menú de configuración de Luma3DS
|
||||
1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ En algunos casos puede ya estar configurado de antes. De ser así, continúa con el siguiente paso
|
||||
1. Presiona (Start) para guardar y reiniciar
|
||||
+ Si te da error, tan solo continúa en la siguiente página
|
||||
+ Si la pantalla se queda en negro, [sigue la guía de solución de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih
|
|||
1. Kopioi `setup_ctrnand_luma3ds.gm9` SD-korttisi `/gm9/scripts/`-kansioon
|
||||
1. Kopioi `cleanup_sd_card.gm9` SD-korttisi `/gm9/scripts/`-kansioon
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon
|
||||
1. **Vain New 3DS -käyttäjät:** Kopioi `secret_sector.bin` SD-korttisi `/boot9strap/`-kansioon
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais
|
|||
1. Paina (A):ta jatkaaksesi
|
||||
1. Pidä (R):ää pohjassa ja paina samalla (B):tä irrottaaksesi SD-korttisi
|
||||
1. Aseta SD-korttisi tietokoneeseesi
|
||||
1. Kopioi `<päivämäärä>_<sarjanumero>_sysnand_###.bin` SD-korttisi `/gm9/out/`-kansiosta turvalliseen paikkaan tietokoneellasi
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Varmuuskopioi useaan eri paikkaan (kuten pilvipalveluihin)
|
||||
+ Tämä varmuuskopio pelastaa sinut konsolin vioittumiselta, jos jokin menee pieleen tulevaisuudessa
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Poista `<päivämäärä>_<sarjanumero>_sysnand_###.bin` SD-korttisi `/gm9/out/`-kansiosta kopioituasi sen
|
||||
1. Aseta SD-korttisi takaisin konsoliisi
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Käytä [tallennuksenhallintaohjelmaa](https://github.com/J-D-K/JKSM/releases/la
|
|||
1. Valitse "Install boot9strap" ja vahvista
|
||||
1. Poistu b9sToolista ja sammuta konsolisi
|
||||
+ Voit joutua pakottamaan konsolin sammuksiin pitämällä virtapainiketta pohjassa
|
||||
1. Käynnistä **kohde-3DS**
|
||||
|
||||
#### Vaihe VII – Luma3DS:n määrittäminen
|
||||
|
||||
1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
|
||||
+ Jos saat mustan ruudun, [seuraa tätä vianmääritysohjetta](troubleshooting#musta-ruutu-boot9strapin-asentamisen-jälkeen-kun-sysnand-on-käynnistetty)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
|
||||
+ Jos saat virheen, jatka vain seuraavaan osioon
|
||||
+ Jos saat mustan ruudun, [seuraa tätä vianmääritysohjetta](troubleshooting#musta-ruutu-boot9strapin-asentamisen-jälkeen-kun-sysnand-on-käynnistetty)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD
|
|||
1. Valitse "Move path(s)"
|
||||
1. Isokirjaimisen tiedostopäätteen omaavat tiedostot on nyt siirretty `newdir`-hakemistoon
|
||||
1. Paina (START)-painiketta käynnistääksesi uudelleen
|
||||
1. Palaa osioon [Asennuksen viimeistely](finalizing-setup) ja yritä FBI-injektointia uudelleen
|
||||
1. Jos injektointi ei vieläkään onnistu, siirrä isokirjaimisen tiedostopäätteen omaavat tiedostot takaisin `content`-kansioon ja pienikirjaimisen tiedostopäätteen omaavat tiedostot `newdir`-kansioon. Palaa sitten osioon [Asennuksen viimeistely](finalizing-setup) ja yritä FBI-injektiota uudelleen.
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## Selainpohjainen käynnistystapa ei toimi
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants
|
|||
1. Copiez `setup_ctrnand_luma3ds.gm9` dans le dossier `/gm9/scripts/` sur votre carte SD
|
||||
1. Copiez `cleanup_sd_card.gm9` dans le dossier `/gm9/scripts/` sur votre carte SD
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD
|
||||
1. **New 3DS Seulement:** Copiez `secret_sector.bin` dans le dossier `/boot9strap/` sur votre carte SD
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
|
|||
1. Appuyez sur (A) pour continuer
|
||||
1. Maintenez (R) et appuyez sur (B) en même temps pour éjecter votre carte SD
|
||||
1. Insérez votre carte SD dans votre ordinateur
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Faites des sauvegardes dans plusieurs endroits (tels que des stockages de fichiers en ligne par exemple)
|
||||
+ Cette sauvegarde vous sauvera d'un brick si quoi que ce soit se passe mal à l'avenir
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Réinsérez votre carte SD dans votre 3DS
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
|
|||
1. Sélectionnez "Install boot9strap" et validez
|
||||
1. Quittez b9sTool, puis éteignez votre appareil
|
||||
+ Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
|
||||
1. Allumez **la 3DS cible**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Votre console va démarrer dans la configuration de Luma3DS
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer
|
||||
+ Si vous obtenez une erreur, continuez à la prochaine page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans l
|
|||
1. Sélectionnez "Move path(s)"
|
||||
1. Les fichiers dont les extensions sont en majuscules seront déplacés vers le dossier `newdir`
|
||||
1. Appuyez sur (Start) pour redémarrer votre système
|
||||
1. Retournez à [Finalisation de l'installation](finalizing-setup) et réessayez l'injection FBI
|
||||
1. Si cela ne fonctionne toujours pas, déplacez les fichiers avec une extension en majuscules dans le dossier `content`, puis déplacez les fichiers avec une extension en minuscules dans le dossier `newdir`, puis retournez à [Finalisation de l'installation](finalizing-setup) et réessayez l’injection du FBI
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ title: "A9LH אל B9S"
|
|||
1. תעתיקו את `setup_ctrnand_luma3ds.gm9` אל תיקיית`/gm9/scripts/` על כרטיס הSD שלכם
|
||||
1. תעתיקו את `cleanup_sd_card.gm9` אל תיקיית`/gm9/scripts/` על כרטיס הSD שלכם
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
|
||||
1. **משתמשי New 3DS בלבד:** העתיקו את הקובץ `secret_sector.bin` לתיקייה `/boot9strap/` שב- SD שלכם
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ title: "סיום התהליך"
|
|||
1. תלחצו (A) כדי להמשיך
|
||||
1. תחזיקו (R) ולחצו (B) באותו הזמן כדי להוציא את הSD
|
||||
1. תכניסו את ה-SD שלכם למחשב
|
||||
1. תעתיקו את `<date>_<serialnumber>_sysnand_###.bin` מתיקיית `/gm9/out/` על הכרטיס זכרון אל מקום בטוח במחשב שלכם
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ תיצרו גיבויים במקומות שונים (כמו אחסון בענן)
|
||||
+ הגיבוי הזה ישמור עליכם מבריק אם משהו ישתבש בעתיד
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. תמחקו את `<date>_<serialnumber>_sysnand_###.bin`בתיקיה `/gm9/out/` על הSD לאחר שהעתקתם אותו
|
||||
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
|
|||
1. תבחרו ב "Install boot9strap" ותאשרו
|
||||
1. תצאו מb9sTool, ואז תכבו את הקונסולה
|
||||
+ אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
|
||||
1. תפעילו את **קונסולת היעד**
|
||||
|
||||
#### חלק VII - הגדרת Luma3DS
|
||||
|
||||
1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
|
||||
+ אם אתם מקבלים מסך שחור, [תעקבו אחרי המדריך הזה](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש
|
||||
+ אם אתם מקבלים שגיאה, פשוט תמשיכו בעמוד הבא
|
||||
+ אם אתם מקבלים מסך שחור, [תעקבו אחרי המדריך הזה](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ title: "פתרון בעיות"
|
|||
1. תבחרו "Move path(s)"
|
||||
1. הקבצים עם האותיות הגדולות עברו לתיקיית `newdir`
|
||||
1. תלחצו על (Start) כדי לאתחל את המכשיר
|
||||
1. תחזרו אל [סיום התהליך](finalizing-setup) ותנסו שוב להזריק את FBI
|
||||
1. אם זה עדיין לא עובד, החזירו את הקבצים עם האותיות הגדולות לתיקייה `content`, העבירו את הקבצים עם האותיות הקטנות לתיקייה `newdir`, חזרו ל[סיום התהליך](finalizing-setup) ונסו שוב להזריק את FBI
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## פריצה מבוססת דפדפן לא עובדת
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Select "Move path(s)"
|
||||
1. The uppercase extension files will have been moved to the `newdir` directory
|
||||
1. Press (Start) to reboot your device
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Select "Move path(s)"
|
||||
1. The uppercase extension files will have been moved to the `newdir` directory
|
||||
1. Press (Start) to reboot your device
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ Se durante questa sezione ti verrà chiesto di sovrascrivere dei file sulla tua
|
|||
1. Copia il file `setup_ctrnand_luma3ds.gm9` nella cartella `/gm9/scripts/` della tua scheda SD
|
||||
1. Copia il file `cleanup_sd_card.gm9` nella cartella `/gm9/scripts/` della tua scheda SD
|
||||
1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella cartella `/luma/payloads/` della tua scheda SD
|
||||
1. Rinomina il file`SafeB9SInstaller.bin` appena copiato in `start_SafeB9SInstaller.bin`
|
||||
1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD
|
||||
1. **Solo New 3DS:** Copia il file `secret_sector.bin` nella cartella `/boot9strap/` della scheda SD
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
|
|||
1. Premi il pulsante (A) per continuare
|
||||
1. Tenendo premuto (R), premi (B) per rimuovere la scheda SD
|
||||
1. Inserisci la scheda SD nel tuo computer
|
||||
1. Copia il file `<data>_<codiceseriale>_sysnand_###.bin` dalla cartella `/gm9/out/` della tua scheda SD in una posizione sicura sul tuo computer
|
||||
1. Copia il file `<data>_<codiceseriale>_sysnand_###.bin` e `essential.exefs` dalla cartella `/gm9/out/` della tua scheda SD in una posizione sicura sul tuo computer
|
||||
+ Crea dei backup in più posti (come ad esempio un servizio di storage dei file online)
|
||||
+ Questi backup ti salveranno da un brick nel caso dovesse accadere qualcosa in futuro
|
||||
+ Questi backup ti salveranno da un brick e/o ti aiuteranno a recuperare i file dalla NAND nel caso dovesse accadere qualcosa in futuro
|
||||
1. Cancella il file `<data>_<codiceseriale>_sysnand_###.bin` dalla cartella `/gm9/out/` della tua scheda SD dopo averne salvato il backup
|
||||
1. Reinserisci la scheda SD nella tua console
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
|
|||
1. Seleziona "Install boot9strap" e conferma
|
||||
1. Esci da b9sTool, quindi spegni la tua console
|
||||
+ Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
|
||||
1. Accendi il **3DS di destinazione**
|
||||
|
||||
#### Sezione VII - Configurare Luma3DS
|
||||
|
||||
1. La tua console dovrebbe avviarsi all'interno del menu di configurazione di Luma3DS
|
||||
+ Se ottieni uno schermo nero, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Avvia la tua console tenendo premuto (Select) per avviare il menu delle opzioni di Luma
|
||||
1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In alcuni casi potrebbe essere già configurato. In tal caso, puoi pure passare oltre
|
||||
1. Premi (Start) per salvare e riavviare il 3DS
|
||||
+ Se ottieni un errore, continua comunque alla pagina successiva
|
||||
+ Se ottieni uno schermo nero, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. パソコンにSDカードを入れます
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **「Show NAND or user string in System Settings」**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. (Start) を押してセーブして再起動します
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. (A)를 눌러 진행해 주세요.
|
||||
1. (R) 버튼과 (B)를 동시에 눌러 SD 카드를 뺄 준비를 해 주세요.
|
||||
1. SD 카드를 컴퓨터에 삽입해 주세요.
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ 여러 위치에 백업을 해 주세요. (온라인 파일 저장 공간 등)
|
||||
+ 나중에 문제가 생겨 벽돌이 되었을 때 이 백업으로 기기를 살릴 수 있습니다.
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. SD 카드를 기기에 다시 삽입해 주세요.
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요.
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Tekan (A) untuk meneruskan
|
||||
1. Tahan (R) dan tekan (B) pada masa yang sama untuk mengeluarkan kad SD
|
||||
1. Pasang kad SD anda ke dalam komputer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ Simpanan ini akan menyelamatkan anda daripada brick andai perkara tidak elok berlaku kelak
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Tekan (Start) untuk save dan reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Druk op (A) om door te gaan
|
||||
1. Houd (R) en (B) gelijkertijd ingedrukt om je SD kaart uit te werpen
|
||||
1. Plaats je SD kaart in je computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Maak back-ups in verschillende locaties (zoals een online bestandsopslag)
|
||||
+ Deze backup zal je redden van een brick als er iets fout gaat in de toekomst
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Stop je SD kaart terug in je 3DS
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Druk op (Start) om op te slaan en opnieuw op te starten
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -83,8 +83,8 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Selecteer "Move path(s)"
|
||||
1. De bestanden met extensies met hoofdletters zullen naar de map `newdir` verplaatst zijn
|
||||
1. Druk op (Start) om je 3DS opnieuw op te starten
|
||||
1. Return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Finalizing Setup](finalizing-setup) and retry the FBI injection
|
||||
1. Retry the H&S injection
|
||||
1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection
|
||||
|
||||
## A browser based exploit is not working
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Trykk (A) for å fortsette
|
||||
1. Hold (R) og trykk (B) for å løse ut SD-kortet
|
||||
1. Sett inn SD-kortet i datamaskinen din
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ Denne sikkerhetskopien vil spare deg fra en brick hvis noe går galt i fremtiden
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Sett inn SD-kortet i konsollen igjen
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Trykk (Start) for å lagre og starte på nytt
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Naciśnij (A), aby kontynuować
|
||||
1. Przytrzymaj przycisk (R) i jednocześnie naciśnij przycisk (B), aby bezpiecznie wyjąć kartę SD
|
||||
1. Włóż kartę SD do komputera
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ Ta kopia uratuje Cie przed brick'iem jeśli cokolwiek pójdzie nie tak w przyszłości
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ Para todas as etapas nesta seção, substitua quaisquer arquivos existentes no s
|
|||
1. Copie o`setup_ctrnand_luma3ds.gm9` para a pasta `/gm9/scripts/`no seu cartão de memória
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copie o `boot9strap.firm` e o `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD
|
||||
1. **Apenas usuários dos New 3DS:** Copie o `secret_sector.bin` para a pasta `/boot9strap/` no seu cartão SD
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
|
|||
1. Aperte (A) para continuar
|
||||
1. Segure (R) e aperte (B) ao mesmo tempo para ejetar o cartão SD
|
||||
1. Insira o cartão SD no seu computador
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Faça backups em diversos lugares (tais como armazenamento de arquivos online)
|
||||
+ Este backup vai salvá-lo de um brick caso algo dê errado no futuro
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsira seu cartão SD no seu dispositivo
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
|
|||
1. Selecione "Install boot9strap" e confirme
|
||||
1. Saia do b9sTool, depois desligue o seu dispositivo
|
||||
+ Você pode ter que forçar o desligamento segurando o botão power
|
||||
1. Ligue **o 3DS de destino**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use o botão (A) e os botões direcionais para ativar as seguintes opções:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Aperte (Start) para salvar e reiniciar
|
||||
+ Se você receber um erro, apenas continue a próxima página
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ Pentru toți pașii din această secțiune, suprascrieți fișierele existente d
|
|||
1. Copiați `setup_ctrnand_luma3ds.gm9` în folderul `/gm9/scripts/` de pe cardul SD
|
||||
1. Copiați `cleanup_sd_card.gm9` în folderul `/gm9/scripts/` de pe cardul SD
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD
|
||||
1. **Doar utilizatorii de New 3DS:** Copiați `secret_sector.bin` în folderul `/boot9strap/`de pe cardul SD
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ Dacă, înainte să urmăriți acest ghid, aveați deja o configurare cu EmuNAND
|
|||
1. Apăsați (A) pentru a continua
|
||||
1. Țineți apăsat (R) și apăsați (B) în același timp pentru a scoate cardul SD
|
||||
1. Introduceți cardul SD în calculator
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Faceți copii de rezervă în mai multe locații (cum ar fi stocări online ale fișierelor)
|
||||
+ Această copie de rezervă vă va salva de un brick în caz că ceva nu va merge bine în viitor
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reintroduceți cardul SD în dispozitivul dumneavoastră
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Folosiți un [manager de salvări](https://github.com/J-D-K/JKSM/releases/latest
|
|||
1. Selectaţi "Install boot9strap" şi confirmați
|
||||
1. Ieșiți din b9sTool, apoi închideți dispozitivul
|
||||
+ Este posibil să aveţi nevoie să forțați oprirea dispozitivului apăsând butonul de pornire
|
||||
1. Porniți **3DS-ul sursă**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Dispozitivul dumneavoastră ar trebui să fi pornit meniul de configurare Luma3DS
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Apăsați (Start) pentru a salva și reporni
|
||||
+ Dacă primiţi o eroare, doar continuați spre pagina următoare
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ title: "С A9LH до B9S"
|
|||
1. Скопируйте `setup_ctrnand_luma3ds.gm9` в папку `/gm9/scripts/` на SD-карте
|
||||
1. Скопируйте `cleanup_sd_card.gm9` в папку `/gm9/scripts/` на SD-карте
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты
|
||||
1. **Только для пользователей New 3DS:** Скопируйте `secret_sector.bin` в папку `/boot9strap/` на SD-карте
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ title: "Завершение установки"
|
|||
1. Нажмите (A), чтобы продолжить
|
||||
1. Удерживая (R) нажмите (B) для того, чтобы извлечь SD-карту
|
||||
1. Вставьте SD-карту в компьютер
|
||||
1. Скопируйте `<date>_<serialnumber>_sysnand_###.bin` из папки `/gm9/out/` на SD-карте в безопасное место на вашем компьютере
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Сделайте несколько резервных копий в нескольких местах (например в облачном хранилище)
|
||||
+ Эти бэкапы позволят восстановить консоль, если впоследствии что-то пойдёт не так
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. После копирования удалите `<date>_<serialnumber>_sysnand_###.bin` из папки `/gm9/out/` на SD-карте
|
||||
1. Вставьте SD-карту обратно в консоль
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ title: "Установка boot9strap (Инъекция в игры DSiWare)"
|
|||
1. Выберите "Install boot9strap" и подтвердите выбор
|
||||
1. Закройте b9sTool, затем выключите консоль
|
||||
+ При необходимости выключите консоль принудительно, удерживая кнопку питания
|
||||
1. Включите **целевую 3DS**
|
||||
|
||||
#### Часть VII - Настройка Luma3DS
|
||||
|
||||
1. Ваша консоль должна загрузиться в меню конфигурации Luma3DS
|
||||
+ Если экран остаётся чёрным, обратитесь к разделу [Проблемы и их решения](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Нажимая (A) выберите следующие пункты:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
|
||||
+ Если появляется ошибка, просто переходите к следующей странице
|
||||
+ Если экран остаётся чёрным, обратитесь к разделу [Проблемы и их решения](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Press (A) to continue
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ This backup will save you from a brick if anything goes wrong in the future
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Press (Start) to save and reboot
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
|
|
@ -69,7 +69,6 @@ For all steps in this section, overwrite any existing files on your SD card.
|
|||
1. Copy `setup_ctrnand_luma3ds.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `cleanup_sd_card.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
||||
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
||||
|
||||
|
|
|
|||
|
|
@ -125,9 +125,9 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
1. Devam etmek için (A) basın
|
||||
1. SD kartınızı çıkarmak için aynı anda (R) ve (B) ye basın ve basılı tutun
|
||||
1. SD kartınızı bilgisayarınıza takın
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
Bu yedek eğer ileride bir şey ters giderse cihazın brick olma ihtimalini engelleyecek
|
||||
+ These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. SD kartınızı cihazınıza tekrar takın
|
||||
|
||||
|
|
|
|||
|
|
@ -159,16 +159,15 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Select "Install boot9strap" and confirm
|
||||
1. Exit b9sTool, then power off your device
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Power on **the target 3DS**
|
||||
|
||||
#### Section VII - Configuring Luma3DS
|
||||
|
||||
1. Your device should have booted into the Luma3DS configuration menu
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
1. Boot your device while holding (Select) to launch the Luma configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
+ **"Show NAND or user string in System Settings"**
|
||||
+ In some cases it may already be configured. If so, proceed to the next step
|
||||
1. Kaydedip yeniden başlatmak için (Start) basın
|
||||
+ If you get an error, just continue the next page
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
___
|
||||
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue