all: explain in short detail what Luma3DS configuration even is

_pages/en_US/a9lh-to-b9s.txt

@@ -62,6 +62,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. When prompted, input the key combo given to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
 1. Press (Start) to save and reboot
 

_pages/en_US/installing-boot9strap-(hardmod).txt

@@ -94,6 +94,8 @@ In this section, you will install custom firmware to the dumped NAND image, and
 1. Disconnect your hardmod
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/en_US/installing-boot9strap-(hbl-usm).txt

@@ -71,6 +71,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/en_US/installing-boot9strap-(kartdlphax).txt

@@ -126,7 +126,9 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
-1. Your device should have rebooted into the Luma3DS configuration menu
+1. Your target 3DS should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/en_US/installing-boot9strap-(ntrboot).txt

@@ -63,6 +63,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
 1. Reinsert your SD card into your device
 1. Power on your device
 1. Your device should have booted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/en_US/installing-boot9strap-(soundhax).txt

@@ -76,6 +76,8 @@ In this section, you will install custom firmware onto your device.
 1. When prompted, input the key combo given on the top screen to install boot9strap
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
   + If you get an error, just continue to the next page

_pages/en_US/installing-boot9strap-(usm).txt

@@ -84,6 +84,8 @@ In this section, you will install custom firmware onto your device.
   + If the top screen is blank, power off your device and re-do Section III
 1. Once it is complete, press (A) to reboot your device
 1. Your device should have rebooted into the Luma3DS configuration menu
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
   + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
 1. Press (Start) to save and reboot
 

_pages/en_US/updating-b9s.txt

@@ -51,6 +51,8 @@ For all steps in this section, overwrite any existing files on your SD card.
 1. Reinsert your SD card into your device
 1. Power on your device
 1. If your device has booted into the Luma3DS configuration menu, press (Start) to save and reboot
+  + Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+  + For the purpose of this guide, these settings will be left on default settings
 
 ___