From fd86f98d4a7cc0cff8328879a3bd7764f0263a59 Mon Sep 17 00:00:00 2001 From: zoogie Date: Mon, 27 Apr 2020 04:22:33 -0500 Subject: [PATCH 1/6] usm: reboot instead of crash wording --- _pages/en_US/installing-boot9strap-(usm).txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/_pages/en_US/installing-boot9strap-(usm).txt b/_pages/en_US/installing-boot9strap-(usm).txt index ad5edfec30..421f17f53b 100644 --- a/_pages/en_US/installing-boot9strap-(usm).txt +++ b/_pages/en_US/installing-boot9strap-(usm).txt @@ -48,7 +48,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Launch System Settings on your device 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section - + Your system should flash Red and then crash a few seconds later. This means the exploit profile was successfully copied + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied 1. Power off your device #### Section III - unSAFE_MODE @@ -76,7 +76,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Launch System Settings on your device 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section - + Your system should flash Green and then crash a few seconds later. This means your WiFi configuration profiles were successfully restored + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored 1. Power your system off 1. Insert your SD card into your computer 1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card From 99e1cb5b14cde5657b590167181842677e393ed4 Mon Sep 17 00:00:00 2001 From: Ian Burgwin Date: Mon, 27 Apr 2020 13:36:03 -0700 Subject: [PATCH 2/6] New Crowdin translations (#1752) * New translations finalizing-setup.txt (Norwegian) * New translations region-changing.txt (Polish) * New translations site-navigation.txt (Polish) * New translations finalizing-setup.txt (Polish) * New translations seedminer.txt (Norwegian) * New translations finalizing-setup.txt (Thai) * New translations 404.txt (Thai) * New translations site-navigation.txt (Thai) * New translations seedminer.txt (Thai) * New translations seedminer.txt (Portuguese, Brazilian) * New translations seedminer.txt (Indonesian) * New translations finalizing-setup.txt (Indonesian) * New translations site-navigation.txt (Indonesian) * New translations legacy-methods.txt (Serbian (Cyrillic)) * New translations seedminer.txt (Malay) * New translations installing-boot9strap-(ntrboot).txt (Malay) * New translations installing-boot9strap-(usm).txt (Vietnamese) * New translations legacy-methods.txt (Malay) * New translations installing-boot9strap-(usm).txt (Malay) * New translations legacy-methods.txt (Croatian) * New translations installing-boot9strap-(usm).txt (Croatian) * New translations legacy-methods.txt (Thai) * New translations installing-boot9strap-(usm).txt (Thai) * New translations legacy-methods.txt (Indonesian) * New translations installing-boot9strap-(usm).txt (Indonesian) * New translations legacy-methods.txt (Portuguese, Brazilian) * New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian) * New translations flashing-ntrboot-(dsi).txt (Russian) * New translations finalizing-setup.txt (Turkish) * New translations legacy-methods.txt (Swedish) * New translations installing-boot9strap-(usm).txt (Swedish) * New translations installing-boot9strap-(usm).txt (Serbian (Cyrillic)) * New translations installing-boot9strap-(usm).txt (Russian) * New translations site-navigation.txt (Turkish) * New translations legacy-methods.txt (Russian) * New translations seedminer.txt (Russian) * New translations seedminer.txt (Swedish) * New translations site-navigation.txt (Croatian) * New translations finalizing-setup.txt (Croatian) * New translations seedminer.txt (Vietnamese) * New translations finalizing-setup.txt (Portuguese, Brazilian) * New translations site-navigation.txt (Portuguese, Brazilian) * New translations seedminer.txt (Croatian) * New translations finalizing-setup.txt (Pirate English) * New translations legacy-methods.txt (Ukrainian) * New translations installing-boot9strap-(usm).txt (Pirate English) * New translations legacy-methods.txt (Vietnamese) * New translations legacy-methods.txt (Chinese Traditional) * New translations installing-boot9strap-(usm).txt (Chinese Traditional) * New translations legacy-methods.txt (Chinese Simplified) * New translations installing-boot9strap-(usm).txt (Chinese Simplified) * New translations installing-boot9strap-(usm).txt (Ukrainian) * New translations seedminer.txt (Pirate English) * New translations legacy-methods.txt (Turkish) * New translations installing-boot9strap-(usm).txt (Turkish) * New translations site-navigation.txt (Malay) * New translations donations.txt (Malay) * New translations site-navigation.txt (Pirate English) * New translations finalizing-setup.txt (Malay) * New translations godmode9-usage.txt (Malay) * New translations site-navigation.txt (Chinese Simplified) * New translations region-changing.txt (Chinese Simplified) * New translations finalizing-setup.txt (Chinese Simplified) * New translations homebrew-launcher-(steelhax).txt (Chinese Simplified) * New translations credits.txt (Chinese Simplified) * New translations seedminer.txt (Chinese Simplified) * New translations finalizing-setup.txt (Ukrainian) * New translations site-navigation.txt (Ukrainian) * New translations seedminer.txt (Ukrainian) * New translations seedminer.txt (Chinese Traditional) * New translations finalizing-setup.txt (Vietnamese) * New translations site-navigation.txt (Vietnamese) * New translations site-navigation.txt (Chinese Traditional) * New translations finalizing-setup.txt (Chinese Traditional) * New translations legacy-methods.txt (Pirate English) * New translations installing-boot9strap-(usm).txt (Romanian) * New translations installing-boot9strap-(usm).txt (French) * New translations installing-boot9strap-(usm).txt (Spanish) * New translations installing-boot9strap-(usm).txt (Afrikaans) * New translations installing-boot9strap-(usm).txt (Arabic) * New translations installing-boot9strap-(usm).txt (Catalan) * New translations installing-boot9strap-(usm).txt (Czech) * New translations file-extensions-(windows).txt (Czech) * New translations credits.txt (French) * New translations homebrew-launcher-(pichaxx).txt (Afrikaans) * New translations installing-boot9strap-(browser).txt (Japanese) * New translations ntrboot.txt (Italian) * New translations h2testw-(windows).txt (Korean) * New translations installing-boot9strap-(usm).txt (Dutch) * New translations installing-boot9strap-(usm).txt (Korean) * New translations installing-boot9strap-(usm).txt (Japanese) * New translations installing-boot9strap-(usm).txt (Italian) * New translations installing-boot9strap-(usm).txt (Hungarian) * New translations installing-boot9strap-(usm).txt (Hebrew) * New translations installing-boot9strap-(usm).txt (Finnish) * New translations installing-boot9strap-(usm).txt (Greek) * New translations installing-boot9strap-(usm).txt (German) * New translations installing-boot9strap-(usm).txt (Danish) * New translations ctrtransfer.txt (Greek) * New translations godmode9-usage.txt (Hungarian) * New translations installing-boot9strap-(mset).txt (Hungarian) * New translations flashing-ntrboot-(dsi).txt (Finnish) * New translations dsidumper.txt (Russian) * New translations get-started.txt (Swedish) * New translations h2testw-(windows).txt (Norwegian) * New translations installing-boot9strap-(mset).txt (Portuguese) * New translations site-navigation.txt (Chinese Simplified) * New translations finalizing-setup.txt (Chinese Simplified) * New translations credits.txt (Chinese Simplified) * New translations installing-boot9strap-(usm).txt (Serbian (Cyrillic)) * New translations installing-boot9strap-(usm).txt (Chinese Simplified) * New translations installing-boot9strap-(usm).txt (Ukrainian) * New translations installing-boot9strap-(usm).txt (Turkish) * New translations installing-boot9strap-(usm).txt (Swedish) * New translations installing-boot9strap-(usm).txt (Russian) * New translations installing-boot9strap-(usm).txt (Portuguese) * New translations installing-boot9strap-(usm).txt (Polish) * New translations installing-boot9strap-(usm).txt (Norwegian) * New translations legacy-methods.txt (Chinese Simplified) * New translations seedminer.txt (Chinese Simplified) * New translations site-navigation.txt (Turkish) * New translations troubleshooting.txt (Turkish) * New translations flashing-ntrboot-(nds).txt (Swedish) * New translations installing-boot9strap-(fredtool).txt (Croatian) * New translations godmode9-usage.txt (Malay) * New translations site-navigation.txt (Croatian) * New translations installing-boot9strap-(usm).txt (Vietnamese) * New translations installing-boot9strap-(2xrsa).txt (Pirate English) * New translations installing-boot9strap-(usm).txt (Pirate English) * New translations installing-boot9strap-(usm).txt (Malay) * New translations installing-boot9strap-(usm).txt (Croatian) * New translations installing-boot9strap-(usm).txt (Thai) * New translations installing-boot9strap-(usm).txt (Indonesian) * New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian) * New translations installing-boot9strap-(usm).txt (Chinese Traditional) * New translations 404.txt (Thai) * New translations seedminer.txt (Chinese Simplified) * New translations ctrtransfer.txt (Romanian) * New translations installing-boot9strap-(usm).txt (Romanian) * New translations installing-boot9strap-(usm).txt (French) * New translations installing-boot9strap-(usm).txt (Spanish) * New translations installing-boot9strap-(usm).txt (Afrikaans) * New translations installing-boot9strap-(usm).txt (Arabic) * New translations installing-boot9strap-(usm).txt (Catalan) * New translations installing-boot9strap-(usm).txt (Czech) * New translations site-navigation.txt (Spanish) * New translations updating-b9s.txt (Spanish) * New translations h2testw-(windows).txt (Korean) * New translations installing-boot9strap-(hardmod).txt (Korean) * New translations ntrboot.txt (Italian) * New translations h2testw-(windows).txt (Norwegian) * New translations installing-boot9strap-(usm).txt (Dutch) * New translations installing-boot9strap-(usm).txt (Korean) * New translations installing-boot9strap-(usm).txt (Japanese) * New translations installing-boot9strap-(usm).txt (Italian) * New translations installing-boot9strap-(usm).txt (Hungarian) * New translations installing-boot9strap-(usm).txt (Hebrew) * New translations installing-boot9strap-(usm).txt (Finnish) * New translations installing-boot9strap-(usm).txt (Greek) * New translations installing-boot9strap-(usm).txt (German) * New translations installing-boot9strap-(usm).txt (Danish) * New translations move-emunand.txt (Dutch) * New translations ctrtransfer.txt (Greek) * New translations seedminer.txt (Danish) * New translations godmode9-usage.txt (Hungarian) * New translations flashing-ntrboot-(dsi).txt (Finnish) * New translations dsidumper.txt (Russian) * New translations get-started.txt (Swedish) * New translations installing-boot9strap-(fredtool).txt (Serbian (Cyrillic)) * New translations privacy-policy.txt (Serbian (Cyrillic)) * New translations homebrew-launcher-(pichaxx).txt (Portuguese) * New translations installing-boot9strap-(mset).txt (Portuguese) * New translations installing-boot9strap-(usm).txt (Chinese Traditional) * New translations installing-boot9strap-(usm).txt (Chinese Simplified) * New translations installing-boot9strap-(usm).txt (Ukrainian) * New translations installing-boot9strap-(usm).txt (Turkish) * New translations installing-boot9strap-(usm).txt (Swedish) * New translations installing-boot9strap-(usm).txt (Serbian (Cyrillic)) * New translations installing-boot9strap-(usm).txt (Russian) * New translations installing-boot9strap-(usm).txt (Portuguese) * New translations installing-boot9strap-(usm).txt (Polish) * New translations installing-boot9strap-(usm).txt (Norwegian) * New translations site-navigation.txt (Turkish) * New translations troubleshooting.txt (Turkish) * New translations site-navigation.txt (Croatian) * New translations installing-boot9strap-(fredtool).txt (Croatian) * New translations installing-boot9strap-(2xrsa).txt (Pirate English) * New translations installing-boot9strap-(usm).txt (Vietnamese) * New translations installing-boot9strap-(usm).txt (Portuguese, Brazilian) * New translations installing-boot9strap-(usm).txt (Indonesian) * New translations installing-boot9strap-(usm).txt (Thai) * New translations installing-boot9strap-(usm).txt (Croatian) * New translations installing-boot9strap-(usm).txt (Malay) * New translations installing-boot9strap-(usm).txt (Pirate English) * New translations cart-update.txt (Pirate English) * New translations homebrew-launcher-(alternatives).txt (Thai) * New translations installing-boot9strap-(usm).txt (Chinese Simplified) * New translations installing-boot9strap-(usm).txt (French) * New translations installing-boot9strap-(soundhax).txt (Estonian) * New translations a9lh-to-b9s.txt (Estonian) * New translations updating-b9s.txt (Estonian) * New translations uninstall-cfw.txt (Estonian) * New translations installing-boot9strap-(ntrboot).txt (Estonian) * New translations ntrboot.txt (Estonian) * New translations flashing-ntrboot-(nds).txt (Estonian) * New translations flashing-ntrboot-(3ds-single-system).txt (Estonian) * New translations flashing-ntrboot-(3ds-multi-system).txt (Estonian) * New translations flashing-ntrboot-(dsi).txt (Estonian) * New translations installing-boot9strap-(2xrsa).txt (Estonian) * New translations installing-boot9strap-(safeb9sinstaller).txt (Estonian) * New translations installing-boot9strap-(frogtool).txt (Estonian) * New translations homebrew-launcher-(steelhax).txt (Estonian) * New translations installing-boot9strap-(fredtool).txt (Estonian) * New translations seedminer.txt (Estonian) * New translations privacy-policy.txt (Estonian) * New translations bannerbomb3.txt (Estonian) * New translations dsidumper.txt (Estonian) * New translations homebrew-launcher-(pichaxx).txt (Estonian) * New translations installing-boot9strap-(usm).txt (Estonian) * New translations installing-boot9strap-(mset).txt (Estonian) * New translations installing-boot9strap-(hardmod).txt (Estonian) * New translations 404.txt (Estonian) * New translations home.txt (Estonian) * New translations ctrtransfer.txt (Estonian) * New translations cart-update.txt (Estonian) * New translations credits.txt (Estonian) * New translations donations.txt (Estonian) * New translations f3-(linux).txt (Estonian) * New translations f3x-(mac).txt (Estonian) * New translations faq.txt (Estonian) * New translations get-started.txt (Estonian) * New translations h2testw-(windows).txt (Estonian) * New translations homebrew-launcher-(soundhax).txt (Estonian) * New translations installing-boot9strap-(browser).txt (Estonian) * New translations move-emunand.txt (Estonian) * New translations region-changing.txt (Estonian) * New translations site-navigation.txt (Estonian) * New translations troubleshooting.txt (Estonian) * New translations en_US.yml (Estonian) * New translations homebrew-launcher-(alternatives).txt (Estonian) * New translations godmode9-usage.txt (Estonian) * New translations file-extensions-(windows).txt (Estonian) * New translations finalizing-setup.txt (Estonian) * New translations legacy-methods.txt (Estonian) * New translations installing-boot9strap-(usm).txt (French) * New translations legacy-methods.txt (French) * New translations legacy-methods.txt (French) * New translations site-navigation.txt (French) * New translations seedminer.txt (French) * New translations site-navigation.txt (French) --- _data/navigation/et_EE.yml | 140 +++++++++++ _pages/af_ZA/finalizing-setup.txt | 2 +- _pages/af_ZA/installing-boot9strap-(usm).txt | 90 +++++++ _pages/af_ZA/legacy-methods.txt | 21 ++ _pages/af_ZA/seedminer.txt | 21 +- _pages/af_ZA/site-navigation.txt | 4 +- _pages/ar_SA/finalizing-setup.txt | 2 +- _pages/ar_SA/installing-boot9strap-(usm).txt | 90 +++++++ _pages/ar_SA/legacy-methods.txt | 21 ++ _pages/ar_SA/seedminer.txt | 21 +- _pages/ar_SA/site-navigation.txt | 4 +- _pages/ca_ES/finalizing-setup.txt | 2 +- _pages/ca_ES/flashing-ntrboot-(dsi).txt | 58 ++--- _pages/ca_ES/installing-boot9strap-(usm).txt | 90 +++++++ _pages/ca_ES/legacy-methods.txt | 21 ++ _pages/ca_ES/seedminer.txt | 21 +- _pages/ca_ES/site-navigation.txt | 4 +- _pages/cs_CZ/finalizing-setup.txt | 2 +- _pages/cs_CZ/installing-boot9strap-(usm).txt | 90 +++++++ _pages/cs_CZ/legacy-methods.txt | 21 ++ _pages/cs_CZ/seedminer.txt | 21 +- _pages/cs_CZ/site-navigation.txt | 4 +- _pages/da_DK/finalizing-setup.txt | 2 +- _pages/da_DK/installing-boot9strap-(usm).txt | 90 +++++++ _pages/da_DK/legacy-methods.txt | 21 ++ _pages/da_DK/seedminer.txt | 23 +- _pages/da_DK/site-navigation.txt | 4 +- _pages/de_DE/donations.txt | 2 +- _pages/de_DE/finalizing-setup.txt | 2 +- _pages/de_DE/installing-boot9strap-(usm).txt | 90 +++++++ _pages/de_DE/legacy-methods.txt | 21 ++ _pages/de_DE/seedminer.txt | 21 +- _pages/de_DE/site-navigation.txt | 4 +- _pages/el_GR/finalizing-setup.txt | 2 +- _pages/el_GR/installing-boot9strap-(usm).txt | 90 +++++++ _pages/el_GR/legacy-methods.txt | 21 ++ _pages/el_GR/seedminer.txt | 21 +- _pages/el_GR/site-navigation.txt | 4 +- _pages/en_PT/cart-update.txt | 16 +- _pages/en_PT/finalizing-setup.txt | 2 +- _pages/en_PT/installing-boot9strap-(usm).txt | 90 +++++++ _pages/en_PT/legacy-methods.txt | 21 ++ _pages/en_PT/seedminer.txt | 21 +- _pages/en_PT/site-navigation.txt | 4 +- _pages/es_ES/finalizing-setup.txt | 2 +- _pages/es_ES/installing-boot9strap-(usm).txt | 90 +++++++ _pages/es_ES/legacy-methods.txt | 21 ++ _pages/es_ES/seedminer.txt | 21 +- _pages/es_ES/site-navigation.txt | 66 ++--- _pages/es_ES/updating-b9s.txt | 90 +++---- _pages/et_EE/404.txt | 9 + _pages/et_EE/a9lh-to-b9s.txt | 94 +++++++ _pages/et_EE/bannerbomb3.txt | 47 ++++ _pages/et_EE/cart-update.txt | 36 +++ _pages/et_EE/credits.txt | 84 +++++++ _pages/et_EE/ctrtransfer.txt | 123 +++++++++ _pages/et_EE/donations.txt | 9 + _pages/et_EE/dsidumper.txt | 37 +++ _pages/et_EE/f3-(linux).txt | 66 +++++ _pages/et_EE/f3x-(mac).txt | 37 +++ _pages/et_EE/faq.txt | 51 ++++ _pages/et_EE/file-extensions-(windows).txt | 39 +++ _pages/et_EE/finalizing-setup.txt | 198 +++++++++++++++ .../flashing-ntrboot-(3ds-multi-system).txt | 58 +++++ .../flashing-ntrboot-(3ds-single-system).txt | 53 ++++ _pages/et_EE/flashing-ntrboot-(dsi).txt | 48 ++++ _pages/et_EE/flashing-ntrboot-(nds).txt | 57 +++++ _pages/et_EE/get-started.txt | 97 +++++++ _pages/et_EE/godmode9-usage.txt | 238 ++++++++++++++++++ _pages/et_EE/h2testw-(windows).txt | 40 +++ _pages/et_EE/home.txt | 91 +++++++ .../homebrew-launcher-(alternatives).txt | 85 +++++++ _pages/et_EE/homebrew-launcher-(pichaxx).txt | 54 ++++ _pages/et_EE/homebrew-launcher-(soundhax).txt | 76 ++++++ _pages/et_EE/homebrew-launcher-(steelhax).txt | 63 +++++ .../et_EE/installing-boot9strap-(2xrsa).txt | 58 +++++ .../et_EE/installing-boot9strap-(browser).txt | 58 +++++ .../installing-boot9strap-(fredtool).txt | 102 ++++++++ .../installing-boot9strap-(frogtool).txt | 80 ++++++ .../et_EE/installing-boot9strap-(hardmod).txt | 96 +++++++ _pages/et_EE/installing-boot9strap-(mset).txt | 60 +++++ .../et_EE/installing-boot9strap-(ntrboot).txt | 141 +++++++++++ ...stalling-boot9strap-(safeb9sinstaller).txt | 39 +++ .../installing-boot9strap-(soundhax).txt | 83 ++++++ _pages/et_EE/installing-boot9strap-(usm).txt | 90 +++++++ _pages/et_EE/legacy-methods.txt | 21 ++ _pages/et_EE/move-emunand.txt | 176 +++++++++++++ _pages/et_EE/ntrboot.txt | 92 +++++++ _pages/et_EE/privacy-policy.txt | 30 +++ _pages/et_EE/region-changing.txt | 141 +++++++++++ _pages/et_EE/seedminer.txt | 94 +++++++ _pages/et_EE/site-navigation.txt | 62 +++++ _pages/et_EE/troubleshooting.txt | 157 ++++++++++++ _pages/et_EE/uninstall-cfw.txt | 88 +++++++ _pages/et_EE/updating-b9s.txt | 77 ++++++ _pages/fi_FI/credits.txt | 8 +- _pages/fi_FI/finalizing-setup.txt | 2 +- _pages/fi_FI/flashing-ntrboot-(dsi).txt | 58 ++--- _pages/fi_FI/installing-boot9strap-(usm).txt | 90 +++++++ _pages/fi_FI/legacy-methods.txt | 21 ++ _pages/fi_FI/seedminer.txt | 21 +- _pages/fi_FI/site-navigation.txt | 4 +- _pages/fr_FR/finalizing-setup.txt | 2 +- _pages/fr_FR/installing-boot9strap-(usm).txt | 90 +++++++ _pages/fr_FR/legacy-methods.txt | 21 ++ _pages/fr_FR/seedminer.txt | 21 +- _pages/fr_FR/site-navigation.txt | 4 +- _pages/he_IL/finalizing-setup.txt | 2 +- _pages/he_IL/installing-boot9strap-(usm).txt | 90 +++++++ _pages/he_IL/legacy-methods.txt | 21 ++ _pages/he_IL/seedminer.txt | 21 +- _pages/he_IL/site-navigation.txt | 4 +- _pages/hr_HR/finalizing-setup.txt | 2 +- _pages/hr_HR/installing-boot9strap-(usm).txt | 90 +++++++ _pages/hr_HR/legacy-methods.txt | 21 ++ _pages/hr_HR/seedminer.txt | 21 +- _pages/hr_HR/site-navigation.txt | 16 +- _pages/hu_HU/finalizing-setup.txt | 2 +- _pages/hu_HU/installing-boot9strap-(usm).txt | 90 +++++++ _pages/hu_HU/legacy-methods.txt | 21 ++ _pages/hu_HU/seedminer.txt | 21 +- _pages/hu_HU/site-navigation.txt | 4 +- _pages/id_ID/finalizing-setup.txt | 2 +- _pages/id_ID/installing-boot9strap-(usm).txt | 90 +++++++ _pages/id_ID/legacy-methods.txt | 21 ++ _pages/id_ID/seedminer.txt | 21 +- _pages/id_ID/site-navigation.txt | 4 +- _pages/it_IT/finalizing-setup.txt | 2 +- _pages/it_IT/godmode9-usage.txt | 2 +- _pages/it_IT/home.txt | 2 +- _pages/it_IT/homebrew-launcher-(pichaxx).txt | 2 +- _pages/it_IT/homebrew-launcher-(steelhax).txt | 2 +- .../installing-boot9strap-(soundhax).txt | 4 +- _pages/it_IT/installing-boot9strap-(usm).txt | 90 +++++++ _pages/it_IT/legacy-methods.txt | 21 ++ _pages/it_IT/ntrboot.txt | 2 +- _pages/it_IT/region-changing.txt | 2 +- _pages/it_IT/seedminer.txt | 23 +- _pages/it_IT/site-navigation.txt | 4 +- _pages/it_IT/uninstall-cfw.txt | 2 +- _pages/ja_JP/finalizing-setup.txt | 2 +- _pages/ja_JP/home.txt | 90 +++---- _pages/ja_JP/installing-boot9strap-(usm).txt | 90 +++++++ _pages/ja_JP/legacy-methods.txt | 21 ++ _pages/ja_JP/seedminer.txt | 21 +- _pages/ja_JP/site-navigation.txt | 4 +- _pages/ko_KR/finalizing-setup.txt | 2 +- .../ko_KR/installing-boot9strap-(hardmod).txt | 14 +- _pages/ko_KR/installing-boot9strap-(usm).txt | 90 +++++++ _pages/ko_KR/legacy-methods.txt | 21 ++ _pages/ko_KR/seedminer.txt | 21 +- _pages/ko_KR/site-navigation.txt | 4 +- _pages/ms_MY/donations.txt | 2 +- _pages/ms_MY/finalizing-setup.txt | 2 +- .../ms_MY/installing-boot9strap-(ntrboot).txt | 42 ++-- _pages/ms_MY/installing-boot9strap-(usm).txt | 90 +++++++ _pages/ms_MY/legacy-methods.txt | 21 ++ _pages/ms_MY/seedminer.txt | 21 +- _pages/ms_MY/site-navigation.txt | 4 +- _pages/nl_NL/finalizing-setup.txt | 2 +- _pages/nl_NL/installing-boot9strap-(usm).txt | 90 +++++++ _pages/nl_NL/legacy-methods.txt | 21 ++ _pages/nl_NL/move-emunand.txt | 144 +++++------ _pages/nl_NL/seedminer.txt | 21 +- _pages/nl_NL/site-navigation.txt | 4 +- _pages/no_NO/ctrtransfer.txt | 186 +++++++------- _pages/no_NO/finalizing-setup.txt | 2 +- _pages/no_NO/installing-boot9strap-(usm).txt | 90 +++++++ _pages/no_NO/legacy-methods.txt | 21 ++ _pages/no_NO/seedminer.txt | 21 +- _pages/no_NO/site-navigation.txt | 4 +- _pages/pl_PL/finalizing-setup.txt | 2 +- _pages/pl_PL/installing-boot9strap-(usm).txt | 90 +++++++ _pages/pl_PL/legacy-methods.txt | 21 ++ _pages/pl_PL/region-changing.txt | 2 +- _pages/pl_PL/seedminer.txt | 21 +- _pages/pl_PL/site-navigation.txt | 4 +- _pages/pt_BR/finalizing-setup.txt | 2 +- _pages/pt_BR/installing-boot9strap-(usm).txt | 90 +++++++ _pages/pt_BR/legacy-methods.txt | 21 ++ _pages/pt_BR/seedminer.txt | 21 +- _pages/pt_BR/site-navigation.txt | 4 +- _pages/pt_PT/finalizing-setup.txt | 2 +- _pages/pt_PT/homebrew-launcher-(pichaxx).txt | 4 +- _pages/pt_PT/installing-boot9strap-(usm).txt | 90 +++++++ _pages/pt_PT/legacy-methods.txt | 21 ++ _pages/pt_PT/seedminer.txt | 21 +- _pages/pt_PT/site-navigation.txt | 4 +- _pages/ro_RO/ctrtransfer.txt | 186 +++++++------- _pages/ro_RO/finalizing-setup.txt | 2 +- .../installing-boot9strap-(soundhax).txt | 92 +++---- _pages/ro_RO/installing-boot9strap-(usm).txt | 90 +++++++ _pages/ro_RO/legacy-methods.txt | 21 ++ _pages/ro_RO/seedminer.txt | 21 +- _pages/ro_RO/site-navigation.txt | 4 +- _pages/ru_RU/finalizing-setup.txt | 2 +- _pages/ru_RU/flashing-ntrboot-(dsi).txt | 58 ++--- _pages/ru_RU/installing-boot9strap-(usm).txt | 90 +++++++ _pages/ru_RU/legacy-methods.txt | 21 ++ _pages/ru_RU/seedminer.txt | 21 +- _pages/ru_RU/site-navigation.txt | 4 +- _pages/sr_SP/finalizing-setup.txt | 2 +- .../installing-boot9strap-(fredtool).txt | 152 +++++------ _pages/sr_SP/installing-boot9strap-(usm).txt | 90 +++++++ _pages/sr_SP/legacy-methods.txt | 21 ++ _pages/sr_SP/privacy-policy.txt | 26 +- _pages/sr_SP/seedminer.txt | 23 +- _pages/sr_SP/site-navigation.txt | 4 +- _pages/sv_SE/finalizing-setup.txt | 2 +- _pages/sv_SE/installing-boot9strap-(usm).txt | 90 +++++++ _pages/sv_SE/legacy-methods.txt | 21 ++ _pages/sv_SE/seedminer.txt | 21 +- _pages/sv_SE/site-navigation.txt | 4 +- _pages/sv_SE/updating-b9s.txt | 18 +- _pages/th_TH/finalizing-setup.txt | 2 +- .../homebrew-launcher-(alternatives).txt | 44 ++-- _pages/th_TH/installing-boot9strap-(usm).txt | 90 +++++++ _pages/th_TH/legacy-methods.txt | 21 ++ _pages/th_TH/seedminer.txt | 21 +- _pages/th_TH/site-navigation.txt | 4 +- _pages/tr_TR/finalizing-setup.txt | 2 +- _pages/tr_TR/installing-boot9strap-(usm).txt | 90 +++++++ _pages/tr_TR/legacy-methods.txt | 21 ++ _pages/tr_TR/seedminer.txt | 21 +- _pages/tr_TR/site-navigation.txt | 4 +- _pages/uk_UA/finalizing-setup.txt | 2 +- _pages/uk_UA/installing-boot9strap-(usm).txt | 90 +++++++ _pages/uk_UA/legacy-methods.txt | 21 ++ _pages/uk_UA/seedminer.txt | 21 +- _pages/uk_UA/site-navigation.txt | 4 +- _pages/vi_VN/finalizing-setup.txt | 2 +- _pages/vi_VN/installing-boot9strap-(usm).txt | 90 +++++++ _pages/vi_VN/legacy-methods.txt | 21 ++ _pages/vi_VN/seedminer.txt | 21 +- _pages/vi_VN/site-navigation.txt | 4 +- _pages/zh_CN/finalizing-setup.txt | 2 +- _pages/zh_CN/homebrew-launcher-(steelhax).txt | 82 +++--- _pages/zh_CN/installing-boot9strap-(usm).txt | 90 +++++++ _pages/zh_CN/legacy-methods.txt | 21 ++ _pages/zh_CN/region-changing.txt | 2 +- _pages/zh_CN/seedminer.txt | 23 +- _pages/zh_CN/site-navigation.txt | 4 +- _pages/zh_TW/finalizing-setup.txt | 2 +- _pages/zh_TW/installing-boot9strap-(usm).txt | 90 +++++++ _pages/zh_TW/legacy-methods.txt | 21 ++ _pages/zh_TW/seedminer.txt | 21 +- _pages/zh_TW/site-navigation.txt | 4 +- 247 files changed, 8527 insertions(+), 1316 deletions(-) create mode 100644 _data/navigation/et_EE.yml create mode 100644 _pages/af_ZA/installing-boot9strap-(usm).txt create mode 100644 _pages/af_ZA/legacy-methods.txt create mode 100644 _pages/ar_SA/installing-boot9strap-(usm).txt create mode 100644 _pages/ar_SA/legacy-methods.txt create mode 100644 _pages/ca_ES/installing-boot9strap-(usm).txt create mode 100644 _pages/ca_ES/legacy-methods.txt create mode 100644 _pages/cs_CZ/installing-boot9strap-(usm).txt create mode 100644 _pages/cs_CZ/legacy-methods.txt create mode 100644 _pages/da_DK/installing-boot9strap-(usm).txt create mode 100644 _pages/da_DK/legacy-methods.txt create mode 100644 _pages/de_DE/installing-boot9strap-(usm).txt create mode 100644 _pages/de_DE/legacy-methods.txt create mode 100644 _pages/el_GR/installing-boot9strap-(usm).txt create mode 100644 _pages/el_GR/legacy-methods.txt create mode 100644 _pages/en_PT/installing-boot9strap-(usm).txt create mode 100644 _pages/en_PT/legacy-methods.txt create mode 100644 _pages/es_ES/installing-boot9strap-(usm).txt create mode 100644 _pages/es_ES/legacy-methods.txt create mode 100644 _pages/et_EE/404.txt create mode 100644 _pages/et_EE/a9lh-to-b9s.txt create mode 100644 _pages/et_EE/bannerbomb3.txt create mode 100644 _pages/et_EE/cart-update.txt create mode 100644 _pages/et_EE/credits.txt create mode 100644 _pages/et_EE/ctrtransfer.txt create mode 100644 _pages/et_EE/donations.txt create mode 100644 _pages/et_EE/dsidumper.txt create mode 100644 _pages/et_EE/f3-(linux).txt create mode 100644 _pages/et_EE/f3x-(mac).txt create mode 100644 _pages/et_EE/faq.txt create mode 100644 _pages/et_EE/file-extensions-(windows).txt create mode 100644 _pages/et_EE/finalizing-setup.txt create mode 100644 _pages/et_EE/flashing-ntrboot-(3ds-multi-system).txt create mode 100644 _pages/et_EE/flashing-ntrboot-(3ds-single-system).txt create mode 100644 _pages/et_EE/flashing-ntrboot-(dsi).txt create mode 100644 _pages/et_EE/flashing-ntrboot-(nds).txt create mode 100644 _pages/et_EE/get-started.txt create mode 100644 _pages/et_EE/godmode9-usage.txt create mode 100644 _pages/et_EE/h2testw-(windows).txt create mode 100644 _pages/et_EE/home.txt create mode 100644 _pages/et_EE/homebrew-launcher-(alternatives).txt create mode 100644 _pages/et_EE/homebrew-launcher-(pichaxx).txt create mode 100644 _pages/et_EE/homebrew-launcher-(soundhax).txt create mode 100644 _pages/et_EE/homebrew-launcher-(steelhax).txt create mode 100644 _pages/et_EE/installing-boot9strap-(2xrsa).txt create mode 100644 _pages/et_EE/installing-boot9strap-(browser).txt create mode 100644 _pages/et_EE/installing-boot9strap-(fredtool).txt create mode 100644 _pages/et_EE/installing-boot9strap-(frogtool).txt create mode 100644 _pages/et_EE/installing-boot9strap-(hardmod).txt create mode 100644 _pages/et_EE/installing-boot9strap-(mset).txt create mode 100644 _pages/et_EE/installing-boot9strap-(ntrboot).txt create mode 100644 _pages/et_EE/installing-boot9strap-(safeb9sinstaller).txt create mode 100644 _pages/et_EE/installing-boot9strap-(soundhax).txt create mode 100644 _pages/et_EE/installing-boot9strap-(usm).txt create mode 100644 _pages/et_EE/legacy-methods.txt create mode 100644 _pages/et_EE/move-emunand.txt create mode 100644 _pages/et_EE/ntrboot.txt create mode 100644 _pages/et_EE/privacy-policy.txt create mode 100644 _pages/et_EE/region-changing.txt create mode 100644 _pages/et_EE/seedminer.txt create mode 100644 _pages/et_EE/site-navigation.txt create mode 100644 _pages/et_EE/troubleshooting.txt create mode 100644 _pages/et_EE/uninstall-cfw.txt create mode 100644 _pages/et_EE/updating-b9s.txt create mode 100644 _pages/fi_FI/installing-boot9strap-(usm).txt create mode 100644 _pages/fi_FI/legacy-methods.txt create mode 100644 _pages/fr_FR/installing-boot9strap-(usm).txt create mode 100644 _pages/fr_FR/legacy-methods.txt create mode 100644 _pages/he_IL/installing-boot9strap-(usm).txt create mode 100644 _pages/he_IL/legacy-methods.txt create mode 100644 _pages/hr_HR/installing-boot9strap-(usm).txt create mode 100644 _pages/hr_HR/legacy-methods.txt create mode 100644 _pages/hu_HU/installing-boot9strap-(usm).txt create mode 100644 _pages/hu_HU/legacy-methods.txt create mode 100644 _pages/id_ID/installing-boot9strap-(usm).txt create mode 100644 _pages/id_ID/legacy-methods.txt create mode 100644 _pages/it_IT/installing-boot9strap-(usm).txt create mode 100644 _pages/it_IT/legacy-methods.txt create mode 100644 _pages/ja_JP/installing-boot9strap-(usm).txt create mode 100644 _pages/ja_JP/legacy-methods.txt create mode 100644 _pages/ko_KR/installing-boot9strap-(usm).txt create mode 100644 _pages/ko_KR/legacy-methods.txt create mode 100644 _pages/ms_MY/installing-boot9strap-(usm).txt create mode 100644 _pages/ms_MY/legacy-methods.txt create mode 100644 _pages/nl_NL/installing-boot9strap-(usm).txt create mode 100644 _pages/nl_NL/legacy-methods.txt create mode 100644 _pages/no_NO/installing-boot9strap-(usm).txt create mode 100644 _pages/no_NO/legacy-methods.txt create mode 100644 _pages/pl_PL/installing-boot9strap-(usm).txt create mode 100644 _pages/pl_PL/legacy-methods.txt create mode 100644 _pages/pt_BR/installing-boot9strap-(usm).txt create mode 100644 _pages/pt_BR/legacy-methods.txt create mode 100644 _pages/pt_PT/installing-boot9strap-(usm).txt create mode 100644 _pages/pt_PT/legacy-methods.txt create mode 100644 _pages/ro_RO/installing-boot9strap-(usm).txt create mode 100644 _pages/ro_RO/legacy-methods.txt create mode 100644 _pages/ru_RU/installing-boot9strap-(usm).txt create mode 100644 _pages/ru_RU/legacy-methods.txt create mode 100644 _pages/sr_SP/installing-boot9strap-(usm).txt create mode 100644 _pages/sr_SP/legacy-methods.txt create mode 100644 _pages/sv_SE/installing-boot9strap-(usm).txt create mode 100644 _pages/sv_SE/legacy-methods.txt create mode 100644 _pages/th_TH/installing-boot9strap-(usm).txt create mode 100644 _pages/th_TH/legacy-methods.txt create mode 100644 _pages/tr_TR/installing-boot9strap-(usm).txt create mode 100644 _pages/tr_TR/legacy-methods.txt create mode 100644 _pages/uk_UA/installing-boot9strap-(usm).txt create mode 100644 _pages/uk_UA/legacy-methods.txt create mode 100644 _pages/vi_VN/installing-boot9strap-(usm).txt create mode 100644 _pages/vi_VN/legacy-methods.txt create mode 100644 _pages/zh_CN/installing-boot9strap-(usm).txt create mode 100644 _pages/zh_CN/legacy-methods.txt create mode 100644 _pages/zh_TW/installing-boot9strap-(usm).txt create mode 100644 _pages/zh_TW/legacy-methods.txt diff --git a/_data/navigation/et_EE.yml b/_data/navigation/et_EE.yml new file mode 100644 index 0000000000..1cadb0e483 --- /dev/null +++ b/_data/navigation/et_EE.yml @@ -0,0 +1,140 @@ +--- +main: + - + title: Home + url: / + - + title: FAQ + url: faq + - + title: Donations + url: donations + - + title: Credits + url: credits + - + title: Updating B9S + url: updating-b9s + - + title: A9LH to B9S + url: a9lh-to-b9s + - + title: Troubleshooting + url: troubleshooting + - + title: Region Changing + url: region-changing + - + title: GodMode9 Usage + url: godmode9-usage + - + title: Site Navigation + url: site-navigation + - + title: Uninstall CFW + url: uninstall-cfw +top: + - + title: This website uses cookies to display the current guide progress on the sidebar and otherwise enhance the site. +bottom: + - + title: For support in English, ask for help at Nintendo Homebrew on Discord. + - + title: If you appreciate this guide, I accept Donations. +footer: + - + title: Source + - + title: Site Navigation + - + title: Why Ads? + - + title: Privacy Policy +sidebar_title: + - + title: Overall Progress +sidebar_pages: + - + title: Home + url: / + - + title: Get Started + url: get-started + - + title: Cart Update + url: cart-update + - + title: ntrboot + url: ntrboot + - + title: Seedminer + url: seedminer + - + title: DSiDumper + url: dsidumper + - + title: BannerBomb3 + url: bannerbomb3 + - + title: Multiple Options + url: multiple-options + - + title: Flashing ntrboot (3DS Single System) + url: flashing-ntrboot-(3ds-single-system) + - + title: Flashing ntrboot (3DS Multi System) + url: flashing-ntrboot-(3ds-multi-system) + - + title: Flashing ntrboot (DSi) + url: flashing-ntrboot-(dsi) + - + title: Flashing ntrboot (NDS) + url: flashing-ntrboot-(nds) + - + title: Flashing ntrboot (Powersaves) + url: flashing-ntrboot-(powersaves) + - + title: Homebrew Launcher (Soundhax) + url: homebrew-launcher-(soundhax) + - + title: Homebrew Launcher (Alternatives) + url: homebrew-launcher-(alternatives) + - + title: Homebrew Launcher (Steelhax) + url: homebrew-launcher-(steelhax) + - + title: Homebrew Launcher (PicHaxx) + url: homebrew-launcher-(pichaxx) + - + title: NTR and Cubic Ninja + url: ntr-and-cubic-ninja + - + title: Installing boot9strap (2xrsa) + url: installing-boot9strap-(2xrsa) + - + title: Installing boot9strap (Browser) + url: installing-boot9strap-(browser) + - + title: Installing boot9strap (Hardmod) + url: installing-boot9strap-(hardmod) + - + title: Installing boot9strap (SafeB9SInstaller) + url: installing-boot9strap-(safeb9sinstaller) + - + title: Installing boot9strap (MSET) + url: installing-boot9strap-(mset) + - + title: Installing boot9strap (ntrboot) + url: installing-boot9strap-(ntrboot) + - + title: Installing boot9strap (Soundhax) + url: installing-boot9strap-(soundhax) + - + title: Installing boot9strap (Frogtool) + url: installing-boot9strap-(frogtool) + - + title: Installing boot9strap (Fredtool) + url: installing-boot9strap-(fredtool) + - + title: Finalizing Setup + url: finalizing-setup diff --git a/_pages/af_ZA/finalizing-setup.txt b/_pages/af_ZA/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/af_ZA/finalizing-setup.txt +++ b/_pages/af_ZA/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/af_ZA/installing-boot9strap-(usm).txt b/_pages/af_ZA/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/af_ZA/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/af_ZA/legacy-methods.txt b/_pages/af_ZA/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/af_ZA/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/af_ZA/seedminer.txt b/_pages/af_ZA/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/af_ZA/seedminer.txt +++ b/_pages/af_ZA/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/af_ZA/site-navigation.txt b/_pages/af_ZA/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/af_ZA/site-navigation.txt +++ b/_pages/af_ZA/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ar_SA/finalizing-setup.txt b/_pages/ar_SA/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/ar_SA/finalizing-setup.txt +++ b/_pages/ar_SA/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/ar_SA/installing-boot9strap-(usm).txt b/_pages/ar_SA/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/ar_SA/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ar_SA/legacy-methods.txt b/_pages/ar_SA/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/ar_SA/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/ar_SA/seedminer.txt b/_pages/ar_SA/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/ar_SA/seedminer.txt +++ b/_pages/ar_SA/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/ar_SA/site-navigation.txt b/_pages/ar_SA/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/ar_SA/site-navigation.txt +++ b/_pages/ar_SA/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ca_ES/finalizing-setup.txt b/_pages/ca_ES/finalizing-setup.txt index 0296b140fa..1b484373f8 100644 --- a/_pages/ca_ES/finalizing-setup.txt +++ b/_pages/ca_ES/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/ca_ES/flashing-ntrboot-(dsi).txt b/_pages/ca_ES/flashing-ntrboot-(dsi).txt index 7ab7c4b628..2c3d01a324 100644 --- a/_pages/ca_ES/flashing-ntrboot-(dsi).txt +++ b/_pages/ca_ES/flashing-ntrboot-(dsi).txt @@ -1,48 +1,48 @@ --- -title: "ntrboot flashelése (DSi)" +title: "Flashing ntrboot (DSi)" --- -{% include toc title="Tartalomjegyzék" %} +{% include toc title="Table of Contents" %} -### Fontos tudnivalók +### Required Reading -Mielőtt elkezdenénk, bizonyosodj meg róla, hogy mindent elolvastál az [ntrboot](ntrboot)-tal kapcsolatban +Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) -Ehhez a módszerhez szükséged lesz átmenetileg egy Nintendo DSi készülékre, ami kompatibilis a flashkártyáddal. Ez a módszer a flashkártyát használja, hogy futtassa az ntrboot flashelő `.nds` fájlt a DSi-den. Ez azt jelenti, hogy a flashkártyádnak támogatnia kell `.nds` fájlok futtatását azon a verzión, amin a DSi-d áll. További információkért lásd a táblázatot az [ntrboot](ntrboot) oldalon. +This method requires temporary access to a Nintendo DSi that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your DSi. This means that your flashcart must support launching `.nds` files on your DSi's version. See the flashcart table on [ntrboot](ntrboot) for more information. -Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési folyamat során **brickelődjön** néhány hamisított flashkártya és végleg használhatatlanná váljon. Ez elég valószínűtlen, azonban éppen emiatt csak eredeti flashkártyákat támogatunk. Ajánlott jó hírű oldalakon vásárolni (mint például az [NDS Card](http://www.nds-card.net/)), hogy elkerüld a hamisított flashkártyákat +Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) {: .notice--danger} -### Amire szükséged lesz +### What You Need -* Olyan flashkártya, ami támogatja az ntrboot-ot -* Két készülék - + **A forrás DSi**: egy Nintendo DSi, ami támogatja a flashkártyádat - + **A cél 3DS**: egy eszköz a 3DS családból, ami gyári állapotban van -* A [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) legújabb verziója *(a `dsi` flasher; nem a sima flasher)* +* Your ntrboot compatible flashcart +* Two devices + + **The source DSi**: the Nintendo DSi which is compatible with your flashcart + + **The target 3DS**: the 3DS family device on stock firmware +* The latest release of [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) *(`dsi` flasher; not the standard flasher)* -### Utasítások +### Instructions -#### Első rész - Előkészületek +#### Section I - Prep Work -1. Kapcsold ki a **forrás DSi**-t -1. Helyezd a flashkártyád SD kártyáját a számítógépbe -1. Másold a `ds_ntrboot_flasher_dsi.nds` fájlt a flashkártyád SD kártyájára -1. Helyezd vissza a flashkártyád SD kártyáját a flashkártyádba -1. Helyezd be az ntrboot kompatibilis DS / DSi flashkártyádat a **forrás DSi**-be +1. Power off **the source DSi** +1. Insert your flashcart's SD card into your computer +1. Copy `ds_ntrboot_flasher_dsi.nds` to your flashcart's SD card +1. Reinsert your flashcart's SD card back into your flashcart +1. Insert your ntrboot compatible DS / DSi flashcart into **the source DSi** -#### Második rész - ntrboot flashelése +#### Section II - Flashing ntrboot -1. Indítsd el a `ds_ntrboot_flasher_dsi.nds` fájlt **a forrás DSi-n** a flashkártyád segítségével -1. Nyomd meg az (A) gombot a folytatáshoz -1. Használd a (Fel) és (Le) gombokat a flashkártyád kiválasztásához -1. Nyomd meg az (A) gombot a folytatáshoz -1. Nyomd meg az (A) gombot, hogy elvégezd az "inject ntrboothax" folyamatot -1. Nyomd meg az (A) gombot, hogy kiválaszd a "RETAIL" opciót -1. Nyomd meg az (A) gombot a folytatáshoz -1. Válaszd az "EXIT" opciót +1. Launch `ds_ntrboot_flasher_dsi.nds` on **the source DSi** using your flashcart +1. Press (A) to continue +1. Use (Up) and (Down) to select your flashcart +1. Press (A) to continue +1. Press (A) to "inject ntrboothax" +1. Press (A) to select "RETAIL" +1. Press (A) to continue +1. Select "EXIT" ___ -### Továbblépés a [boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) +### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) {: .notice--primary} diff --git a/_pages/ca_ES/installing-boot9strap-(usm).txt b/_pages/ca_ES/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/ca_ES/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ca_ES/legacy-methods.txt b/_pages/ca_ES/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/ca_ES/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/ca_ES/seedminer.txt b/_pages/ca_ES/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/ca_ES/seedminer.txt +++ b/_pages/ca_ES/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/ca_ES/site-navigation.txt b/_pages/ca_ES/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/ca_ES/site-navigation.txt +++ b/_pages/ca_ES/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/cs_CZ/finalizing-setup.txt b/_pages/cs_CZ/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/cs_CZ/finalizing-setup.txt +++ b/_pages/cs_CZ/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/cs_CZ/installing-boot9strap-(usm).txt b/_pages/cs_CZ/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/cs_CZ/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/cs_CZ/legacy-methods.txt b/_pages/cs_CZ/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/cs_CZ/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/cs_CZ/seedminer.txt b/_pages/cs_CZ/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/cs_CZ/seedminer.txt +++ b/_pages/cs_CZ/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/cs_CZ/site-navigation.txt b/_pages/cs_CZ/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/cs_CZ/site-navigation.txt +++ b/_pages/cs_CZ/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/da_DK/finalizing-setup.txt b/_pages/da_DK/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/da_DK/finalizing-setup.txt +++ b/_pages/da_DK/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/da_DK/installing-boot9strap-(usm).txt b/_pages/da_DK/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/da_DK/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/da_DK/legacy-methods.txt b/_pages/da_DK/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/da_DK/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/da_DK/seedminer.txt b/_pages/da_DK/seedminer.txt index ee6732839e..79f2063bad 100644 --- a/_pages/da_DK/seedminer.txt +++ b/_pages/da_DK/seedminer.txt @@ -32,7 +32,7 @@ There are two different methods for building on the Seedminer exploit (described #### Section II - Prep Work -1. Insert your SD card into your computer +1. Εισάγετε την κάρτα SD στον υπολογιστή σας 1. Navigate to the `Nintendo 3DS` folder on your SD card 1. Copy the 32 character long name of the folder you see inside Nintendo 3DS + Do not go inside any more folders @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/da_DK/site-navigation.txt b/_pages/da_DK/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/da_DK/site-navigation.txt +++ b/_pages/da_DK/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/de_DE/donations.txt b/_pages/de_DE/donations.txt index 7f5e56f592..e859dec2db 100644 --- a/_pages/de_DE/donations.txt +++ b/_pages/de_DE/donations.txt @@ -1,5 +1,5 @@ --- -title: "Donations" # +title: "Spenden" # layout: single-no-ads --- diff --git a/_pages/de_DE/finalizing-setup.txt b/_pages/de_DE/finalizing-setup.txt index 42a0830117..82df1f0cea 100644 --- a/_pages/de_DE/finalizing-setup.txt +++ b/_pages/de_DE/finalizing-setup.txt @@ -72,7 +72,7 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Drücke gleichzeitig (L) + (Steuerkreuz unten) + (Select) um das Rosalina Menü zu öffnen +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Wähle "Miscellaneous options" 1. Wähle "Switch the hb. title to the current app." 1. Drücke (B) um fortzufahren diff --git a/_pages/de_DE/installing-boot9strap-(usm).txt b/_pages/de_DE/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..9f043f5456 --- /dev/null +++ b/_pages/de_DE/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### Was du brauchst + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Schritt I - Vorbereitungen + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Stecke deine SD-Karte in deinen Computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Stecke deine SD-Karte nun wieder in deinen 3DS +1. Schalte deine Konsole an +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Schalte deinen 3DS aus + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Schritt IV - Luma3DS konfigurieren + +1. Your device should automatically show the Luma Configuration menu +1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren: + + **"Show NAND or user string in System Settings"** +1. Drücke (Start) zum Speichern und neustarten + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Stecke deine SD-Karte in deinen Computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Fortfahren mit [Setup fertigstellen](finalizing-setup) +{: .notice--primary} diff --git a/_pages/de_DE/legacy-methods.txt b/_pages/de_DE/legacy-methods.txt new file mode 100644 index 0000000000..7151ceea4f --- /dev/null +++ b/_pages/de_DE/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/de_DE/seedminer.txt b/_pages/de_DE/seedminer.txt index 0dda581fc3..9aae0f82e7 100644 --- a/_pages/de_DE/seedminer.txt +++ b/_pages/de_DE/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methoden -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/de_DE/site-navigation.txt b/_pages/de_DE/site-navigation.txt index 796ee7ef67..ad5688d833 100644 --- a/_pages/de_DE/site-navigation.txt +++ b/_pages/de_DE/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Setup fertigstellen](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installation von boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installation von boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [EmuNAND verschieben](move-emunand) + [ntrboot](ntrboot) + [Wechseln der Region](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Problembehandlung](troubleshooting) + [CFW deinstallieren](uninstall-cfw) + [B9S updaten](updating-b9s) diff --git a/_pages/el_GR/finalizing-setup.txt b/_pages/el_GR/finalizing-setup.txt index 06f6d2aa04..0e6e4cd318 100644 --- a/_pages/el_GR/finalizing-setup.txt +++ b/_pages/el_GR/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/el_GR/installing-boot9strap-(usm).txt b/_pages/el_GR/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..86f3dc5ef3 --- /dev/null +++ b/_pages/el_GR/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/el_GR/legacy-methods.txt b/_pages/el_GR/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/el_GR/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/el_GR/seedminer.txt b/_pages/el_GR/seedminer.txt index 6f184416fb..79f2063bad 100644 --- a/_pages/el_GR/seedminer.txt +++ b/_pages/el_GR/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/el_GR/site-navigation.txt b/_pages/el_GR/site-navigation.txt index b28d85e79c..4c74c35bb7 100644 --- a/_pages/el_GR/site-navigation.txt +++ b/_pages/el_GR/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Μετακίνηση της EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Αλλαγή Περιοχής](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Αντιμετώπιση Προβλημάτων](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/en_PT/cart-update.txt b/_pages/en_PT/cart-update.txt index 1d8e2d5bd9..b55356141e 100644 --- a/_pages/en_PT/cart-update.txt +++ b/_pages/en_PT/cart-update.txt @@ -12,9 +12,9 @@ All game cartridges contain a copy of the required system version to play it, al Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! Ye gunna be needin' an [alternate method](homebrew-launcher-(alternatives)) 'o enterin' th' Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! -This also means that a cartridge update will NOT install a browser if you do not already have one. 'Tis gunna **only** be updatin' th' actual system version *(fer example, 2.1.0-0 -> 6.0.0-0)*. Th' last number *(th' -0)* gunna **not** change. +This also means that a cartridge update will NOT install a browser if you do not already have one. Ini **hanya** mengemas kini versi sistem sebenarnya *(sebagai contoh, 2.1.0-0 -> 6.0.0-0)*. Nombor terakhir *(-0)* **tidak** akan ditukar. {% endcapture %}
{{ notice-1 | markdownify }}
@@ -28,9 +28,9 @@ This also means that a cartridge update will NOT install a browser if you do not ### Instructions -1. Boot ye device into recovery mode by holdin' (L) + (R) + (A) + (UP) while powerin' on -1. If prompted, decline th' update -1. Reboot ye device -1. Put th' game cart in ye device if ye haven't already -1. Attempt to launch th' game -1. Update when prompted +1. Boot your device into recovery mode by holding (L) + (R) + (A) + (UP) while powering on +1. If prompted, decline the update +1. Reboot your device +1. Put the game in your device if it is not already +1. Cuba lancarkan game +1. Kemaskini apabila diminta diff --git a/_pages/en_PT/finalizing-setup.txt b/_pages/en_PT/finalizing-setup.txt index 53db0db1ec..2c50b242e5 100644 --- a/_pages/en_PT/finalizing-setup.txt +++ b/_pages/en_PT/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at th' same time to be openin' th' Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/en_PT/installing-boot9strap-(usm).txt b/_pages/en_PT/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..51555312fe --- /dev/null +++ b/_pages/en_PT/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert ye SD card into ye computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert ye SD card into ye device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off ye device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use th' (A) button 'n th' D-Pad to turn on th' followin': + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save 'n reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert ye SD card into ye computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/en_PT/legacy-methods.txt b/_pages/en_PT/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/en_PT/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/en_PT/seedminer.txt b/_pages/en_PT/seedminer.txt index 47ea7746c7..7132d85123 100644 --- a/_pages/en_PT/seedminer.txt +++ b/_pages/en_PT/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/en_PT/site-navigation.txt b/_pages/en_PT/site-navigation.txt index 521b9fafe6..96041a168f 100644 --- a/_pages/en_PT/site-navigation.txt +++ b/_pages/en_PT/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizin' Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changin'](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshootin'](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updatin' B9S](updating-b9s) diff --git a/_pages/es_ES/finalizing-setup.txt b/_pages/es_ES/finalizing-setup.txt index 91a7310468..d9b93267a9 100644 --- a/_pages/es_ES/finalizing-setup.txt +++ b/_pages/es_ES/finalizing-setup.txt @@ -72,7 +72,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m 1. Ejecuta la aplicación Modo Descarga (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Espera hasta que veas los dos botones -1. Presiona (L) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Selecciona "Miscellaneous options" 1. Selecciona "Switch the hb. title to the current app." 1. Presiona (B) para continuar diff --git a/_pages/es_ES/installing-boot9strap-(usm).txt b/_pages/es_ES/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..3918b37c80 --- /dev/null +++ b/_pages/es_ES/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### Qué necesitas + +* Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer) +* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Sección I - Preparativos + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Carga tu movable.sed usando la opción "Choose File" +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Inserta tu tarjeta SD en tu computadora +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Ve a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` en tu tarjeta SD + + La `` en cuestión es la misma que usaste en [Seedminer](seedminer) + + Si `Nintendo DSiWare` no existe, créala +1. Si ya hay archivos de copias de seguridad existentes de DSiWare (`.bin`) en esta carpeta, muévelos a tu PC + + Esto te dejará con una carpeta de Nintendo DSiWare vacía. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Vuelve a insertar tu tarjeta SD en tu consola +1. Enciende tu consola +1. Entra a Configuración de la consola +1. Ve a `Data Management` -> `DSiWare` +1. Haz click en la sección de tarjeta SD + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Apaga tu consola + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Sección IV - Configurar Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: + + **"Show NAND or user string in System Settings"** +1. Presiona (Start) para guardar y reiniciar + + Tu consola deberá cargar el Menú HOME después de un breve momento. Si la pantalla se queda en negro por más de 5 minutos, [sigue la guía de solución de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Entra a Configuración de la consola +1. Ve a `Data Management` -> `DSiWare` +1. Haz click en la sección de tarjeta SD + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Inserta tu tarjeta SD en tu computadora +1. Ve a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` en tu tarjeta SD + + La `` en cuestión es la misma que usaste en [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continúa en [Finalizar instalación](finalizing-setup) +{: .notice--primary} diff --git a/_pages/es_ES/legacy-methods.txt b/_pages/es_ES/legacy-methods.txt new file mode 100644 index 0000000000..4181f12d2e --- /dev/null +++ b/_pages/es_ES/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/es_ES/seedminer.txt b/_pages/es_ES/seedminer.txt index 439632ee2c..d7306999c2 100644 --- a/_pages/es_ES/seedminer.txt +++ b/_pages/es_ES/seedminer.txt @@ -75,29 +75,20 @@ Existen dos métodos diferentes que se basan en el exploit Seedminer (descriptos + Conserva este archivo ya que lo necesitarás en las próximas páginas ___ -### Métodos -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -Este método de uso de Seedminer, para hacer un mejor exploit, utiliza tu archivo `movable.sed` para desencriptar cualquier título de DSiWare con el objetivo de inyectar un título de DSiWare vulnerable en la aplicación de Configuración de Internet de DS. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. Este método es compatible con todas las regiones, a excepción de la región CHN que no está cubierta por esta guía. -Este método requiere que la Configuración de Internet de DS funcione correctamente (ver la prueba realizada al comienzo de la página). - -Continúa en [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -Este método sólo es compatible con las regiones EUR, JPN y USA, y es un poco más complicado que el método anterior. Sólo se recomienda utilizar este método si no tienes la aplicación Configuración de internet de DS funcionando. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/es_ES/site-navigation.txt b/_pages/es_ES/site-navigation.txt index cd170ea034..a878c9c847 100644 --- a/_pages/es_ES/site-navigation.txt +++ b/_pages/es_ES/site-navigation.txt @@ -1,60 +1,62 @@ --- -title: "Navegación del Sitio" # +title: "Site Navigation" # layout: single-no-ads sitemap: false --- {% capture notice-1 %} -**Populares** +**Popular** -+ [Finalizar Instalación](finalizing-setup) ++ [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Instalar boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
{% capture notice-2 %} -**Todo** +**All** -+ [A9LH a B9S](a9lh-to-b9s) ++ [A9LH to B9S](a9lh-to-b9s) + [BannerBomb3](bannerbomb3) -+ [Actualizar con cartucho](cart-update) -+ [Créditos](credits) ++ [Cartridge Update](cart-update) ++ [Credits](credits) + [CTRTransfer](ctrtransfer) + [DSiWare Dumper](dsidumper) -+ [Donaciones](donations) ++ [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) + [FAQ](faq) -+ [Extensiones de archivos (Windows)](file-extensions-(windows)) -+ [Finalizar Instalación](finalizing-setup) -+ [Flashear ntrboot (Una consola 3DS)](flashing-ntrboot-(3ds-single-system)) -+ [Flashear ntrboot (Dos consolas 3DS)](flashing-ntrboot-(3ds-multi-system)) -+ [Flashear ntrboot (DSi)](flashing-ntrboot-(dsi)) -+ [Flashear ntrboot (NDS)](flashing-ntrboot-(nds)) -+ [Comencemos](get-started) -+ [Usos de GodMode9](godmode9-usage) ++ [File Extensions (Windows)](file-extensions-(windows)) ++ [Finalizing Setup](finalizing-setup) ++ [Flashing ntrboot (3DS Single System)](flashing-ntrboot-(3ds-single-system)) ++ [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) ++ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) ++ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Get Started](get-started) ++ [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) -+ [Inicio](/) -+ [Homebrew Launcher (alternativas)](homebrew-launcher-(alternatives)) ++ [Home](/) ++ [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) + [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) -+ [Instalar boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) -+ [Instalar boot9strap (Navegador)](installing-boot9strap-(browser)) -+ [Instalar boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -+ [Instalar boot9strap (Frogtool)](installing-boot9strap-(frogtool)) -+ [Instalar boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Instalar boot9strap (MSET)](installing-boot9strap-(mset)) -+ [Instalar boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) ++ [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) ++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) ++ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) ++ [Installing boot9strap (MSET)](installing-boot9strap-(mset)) ++ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) -+ [Instalar boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Mover EmuNAND](move-emunand) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) -+ [Cambio de Región](region-changing) ++ [Region Changing](region-changing) + [Seedminer](seedminer) -+ [Solución de Problemas](troubleshooting) -+ [Desinstalar CFW](uninstall-cfw) -+ [Actualizar B9S](updating-b9s) ++ [Legacy Seedminer Methods](legacy-methods) ++ [Troubleshooting](troubleshooting) ++ [Uninstall CFW](uninstall-cfw) ++ [Updating B9S](updating-b9s) {% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/es_ES/updating-b9s.txt b/_pages/es_ES/updating-b9s.txt index faa95385f5..84d8eb17f1 100644 --- a/_pages/es_ES/updating-b9s.txt +++ b/_pages/es_ES/updating-b9s.txt @@ -1,77 +1,77 @@ --- -title: "Actualizar B9S" # +title: "Updating B9S" --- -{% include toc title="Tabla de contenidos" %} +{% include toc title="Table of Contents" %} -### Lectura requerida +### Required Reading -Esta página es para ayudar a los usuarios actuales de boot9strap a actualizar su instalación a la última versión. +This page is for existing boot9strap users to update their installation of boot9strap to the latest version. {% capture notice-1 %} -Ha habido muchos reportes de olas de baneos a usuarios de CFW por parte de Nintendo. Para protegerte, puedes realizar los siguientes pasos antes de seguir esta guía: +There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: -1. Ve a Configuración de la consola, luego a "Configuración de internet", luego "Envío de información sobre la consola" -1. Desactiva la opción "Envío de información sobre la consola" -1. Sal de la Configuración de la consola -1. Ve a tu Lista de Amigos (el [Icono Naranja con una cara]({{ "/images/friend-list-icon.png" | absolute_url }}) en la fila superior de tu Menú HOME) - + Si recibes un error y eres expulsado del menú, la configuración de la Lista de Amigos ya ha sido deshabilitada o tu consola no se puede conectar a los servidores de Nintendo (debido a un ban o por problemas de conexión) -1. Ve a la configuración de la Lista de amigos, luego a "Notificaciones entre amigos", y luego "Mostrar qué estás jugando" -1. Desactiva la opción "Mostrar qué estás jugando" -1. Sal de tu Lista de amigos +1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" +1. Disable the "Sending of System Information" option +1. Exit the System Settings +1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) + + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) +1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" +1. Disable the "Show friends what you're playing" option +1. Exit your Friend List {% endcapture %}
{{ notice-1 | markdownify }}
-### Qué necesitas +### What You Need -* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La última versión [del Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -### Instrucciones +### Instructions -#### Sección I - Preparativos +#### Section I - Prep Work -Para todos los pasos en esta sección, sobreescribe cualquier archivo existente en tu tarjeta SD. +For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} -1. Inserta tu tarjeta SD en tu computadora -1. Copia `boot.3dsx` a la raíz de tu tarjeta SD -1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD -1. Copia `SafeB9SInstaller.firm` desde el `.zip` de SafeB9SInstaller a la carpeta `/luma/payloads/` en tu tarjeta SD -1. Vuelve a insertar tu tarjeta SD en tu consola +1. Insert your SD card into your computer +1. Copy `boot.3dsx` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card +1. Reinsert your SD card into your device -#### Sección II - Instalar boot9strap +#### Section II - Installing boot9strap -1. Inicia el menú de selección de payloads de Luma3DS manteniendo (Start) al encender -1. Inicia SafeB9SInstaller presionando (A) -1. Espera a que todos los controles de seguridad se completen -1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap -1. Una vez que se haya completado, mantén presionado (Start) mientras pulsas (A) para reiniciar tu consola en el selector de payloads de Luma3DS - + Si se produce un error `argc = 0` al iniciar tu consola luego de actualizar B9S, tan sólo continúa para solucionarlo +1. Launch Luma3DS chainloader menu by holding (Start) during boot +1. Launch SafeB9SInstaller by pressing (A) +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, hold (Start) while pressing (A) to reboot your device to the Luma3DS chainloader + + If you encounter an `argc = 0` error booting your device after the B9S update, just continue to fix it -#### Section III - Actualizar Luma3DS +#### Section III - Update Luma3DS -1. Apaga tu consola -1. Inserta tu tarjeta SD en tu computadora -1. Copia `boot.firm` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD reemplazando el archivo existente -1. Vuelve a insertar tu tarjeta SD en tu consola -1. Enciende tu consola +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Reinsert your SD card into your device +1. Power on your device -#### Sección IV - Configurar Luma3DS +#### Section IV - Configuring Luma3DS -Esta sección es sólo necesaria si se ha mostrado la configuración Luma3DS luego de reiniciar. +This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot. {: .notice--info} -1. En el menú de configuración de Luma3DS, usa el botón (A) y el D-Pad para activar lo siguiente: +1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -1. Presiona (Start) para guardar y reiniciar +1. Press (Start) to save and reboot ___ -### Continúa en [Finalizar instalación](finalizing-setup) +### Continue to [Finalizing Setup](finalizing-setup) {: .notice--primary} diff --git a/_pages/et_EE/404.txt b/_pages/et_EE/404.txt new file mode 100644 index 0000000000..7887b3f4db --- /dev/null +++ b/_pages/et_EE/404.txt @@ -0,0 +1,9 @@ +--- +title: "Page Not Found" # +layout: single-no-ads +excerpt: "Page not found. Your pixels are in another canvas." # +sitemap: false +--- + +Sorry, but the page you were trying to view does not exist. +{: .notice--info} diff --git a/_pages/et_EE/a9lh-to-b9s.txt b/_pages/et_EE/a9lh-to-b9s.txt new file mode 100644 index 0000000000..60eaed476f --- /dev/null +++ b/_pages/et_EE/a9lh-to-b9s.txt @@ -0,0 +1,94 @@ +--- +title: "A9LH to B9S" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page is for existing arm9loaderhax users to update their devices to boot9strap. + +All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation. + +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). + +To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). + +If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +{: .notice--warning} + +{% capture notice-1 %} +There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: + +1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" +1. Disable the "Sending of System Information" option +1. Exit the System Settings +1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) + + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) +1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" +1. Disable the "Show friends what you're playing" option +1. Exit your Friend List + +{% endcapture %} + +
{{ notice-1 | markdownify }}
+ +### What You Need + +Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. +{: .notice--info} + +Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console. If you do not have a New 3DS, you do not need `secret_sector.bin`. +{: .notice--info} + +* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) + +### Instructions + +#### Section I - Prep Work + +For all steps in this section, overwrite any existing files on your SD card. +{: .notice--info} + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.3dsx` to the root of your SD card +1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card +1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card + + ![]({{ "/images/screenshots/a9lh-to-b9s-file-layout.png" | absolute_url }}) + {: .notice--info} + +1. Reinsert your SD card into your device + +#### Section II - Installing boot9strap + +1. Boot your device while holding (Start) to launch SafeB9SInstaller + + If you see the luma configuration screen instead of SafeB9SInstaller, simply press (Start), then shutdown your 3DS and try again + + If this gives you an error, try either using a new SD card, or formatting your current SD card (backup existing files first) +1. Wait for all safety checks to complete + + If you get an "OTP Crypto Fail" error, download - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce), then put it in the `/boot9strap/` folder on your SD card and try again +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device. + + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card + +#### Section III - Configuring Luma3DS + +1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/bannerbomb3.txt b/_pages/et_EE/bannerbomb3.txt new file mode 100644 index 0000000000..590a26735e --- /dev/null +++ b/_pages/et_EE/bannerbomb3.txt @@ -0,0 +1,47 @@ +--- +title: "BannerBomb3" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to dump the DSi Internet Settings application to the SD root. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) + +#### Section I - BannerBomb3 +1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Go" + + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you dont delete any intentional backups +1. Copy the `F00D43D5.bin` file from the `output\Usa_Europe_Japan_Korea\` folder of the downloaded BannerBomb3 archive (`tadmuffin_out.zip`) to the `Nintendo DSiWare` folder +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your system should flash Magenta (pink/purple) and then crash a few seconds later. This means it worked +1. Power off your device +1. Insert your SD card into your computer +1. You should now have `42383841.bin` in SD root. This is the DSiWare backup you will use later in the guide +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from the Nintendo DSiWare folder and from your computer. This file will not be needed anymore + +Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) +{: .notice--primary} + diff --git a/_pages/et_EE/cart-update.txt b/_pages/et_EE/cart-update.txt new file mode 100644 index 0000000000..f1595cc2e4 --- /dev/null +++ b/_pages/et_EE/cart-update.txt @@ -0,0 +1,36 @@ +--- +title: "Cartridge Update" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +All game cartridges contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection). + +{% capture notice-1 %} + +Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. + +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! + +This also means that a cartridge update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change. +{% endcapture %} + +
{{ notice-1 | markdownify }}
+ +**Updating with a game cartridge containing the version 9.9.0 or above will remove your browser until a standard online update is performed!** +{: .notice--danger} + +### What You Need + +* A game cartridge that [contains the version](http://www.3dsdb.com/) you wish to update to + +### Instructions + +1. Boot your device into recovery mode by holding (L) + (R) + (A) + (UP) while powering on +1. If prompted, decline the update +1. Reboot your device +1. Put the game in your device if it is not already +1. Attempt to launch the game +1. Update when prompted diff --git a/_pages/et_EE/credits.txt b/_pages/et_EE/credits.txt new file mode 100644 index 0000000000..e66f591db9 --- /dev/null +++ b/_pages/et_EE/credits.txt @@ -0,0 +1,84 @@ +--- +title: "Credits" +--- + +**Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** +{: .notice--primary} + +**Special thanks to all of [the translators](https://crowdin.com/project/3ds-guide) for being awesome!** +{: .notice--primary} + +If I forgot you here, contact me and I'll add your name. + +{% capture notice-1 %} + + + Al3x_10m + + aliaspider + + AngelSL + + ashinnblunts + + AuroraWright + + b1l1s + + BernardoGiordano + + Cartman123 + + Cell9 + + coder65535 + + Cruel` + + d0k3 + + dank101 + + Dazzozo + + DeadPhoenix + + Delebile + + DinohScene + + dukesrg + + elementalcode + + elSeledonio + + erman1337 + + felipejfc + + figgyc + + Frozen_Chen + + Gelex + + Hamcha + + icecream + + ihaveamac + + IngeniousDefault + + J-D-K + + Jisagi + + jkcgs + + kartik + + LordBass + + MassExplosion123 + + mid-kid + + MrNbaYoh + + Mrrraou + + Night_Fallen_Wolf + + Normmatt + + plutooo + + Psi-Hate + + RandallHoffman + + Raugo + + Reboot.ms + + s_99 + + SciresM + + Shadowtrance + + shinyquagsire23 + + skiptirengu + + smealum + + Steveice10 + + stuckpixel + + Syphurith + + Tech0verlord + + TiniVi + + TuxSH + + Urbanshadow + + Vappy + + vegaroxas + + Wolfvak + + WulfyStylez + + xy2_ + + yellows8 + + yifan_lu + + zoogie + +{% endcapture %} + +
{{ notice-1 | markdownify }}
diff --git a/_pages/et_EE/ctrtransfer.txt b/_pages/et_EE/ctrtransfer.txt new file mode 100644 index 0000000000..d099002134 --- /dev/null +++ b/_pages/et_EE/ctrtransfer.txt @@ -0,0 +1,123 @@ +--- +title: "CTRTransfer" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is add-on section for installing an 11.5.0 CTRTransfer image to your device. + +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). + +Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. + +You MUST have already installed Luma3DS and boot9strap to use this. +{: .notice--danger} + +### What You Need + +* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)* +* The 11.5.0 CTRTransfer image for your device and region +*(if your device is not from one of these regions, just pick one that matches your device type)*: + + - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) +~ + + - [Old 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Create a folder named `cias` on the root of your SD card if it does not already exist +1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card +1. Copy the 11.5.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/gm9/` folder on your SD card +1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card +1. Reinsert your SD card into your device + +#### Section II - CTRTransfer + +1. Launch GodMode9 by holding (Start) during boot +1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed +1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Navigate to `[0:] SDCARD` -> `gm9` +1. Press (A) on the CTRTransfer `.bin` to select it +1. Select "CTRNAND options..." +1. Select "Transfer image to CTRNAND" +1. If prompted, select "Transfer to SysNAND" + + This prompt will only appear if you have an EmuNAND +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given + + This process will take some time +1. Once the transfer has completed, press (A) to continue +1. Press (B) to decline relocking write permissions if prompted +1. Press (B) twice to return to the main menu +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Scripts from Plailect's Guide" +1. Select "CTRTransfer Ticket Copy" +1. When prompted, press (A) to proceed +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Press (Start) to reboot your device +1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + + Updates while using B9S + Luma (what you have) are safe + + If this gives you an error, set your DNS settings to "auto" + +#### Section III - Launching FBI + +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Launch the Download Play application +1. Your device should load the Homebrew Launcher + +#### Section IV - Reinstalling Tickets + +If script found no user tickets told you to skip this section, then skip this section +{: .notice--info} + +1. Launch FBI from the list of homebrew +1. Navigate to `SD` -> `cias` +1. Return to the SD directory with (B) +1. Select "gm9" +1. Select "out" +1. Select "ctrtransfer_tickets" +1. Do the following process for either the `eshop` folder, `unknown` folder, or both + + Navigate to the folder + + Select "\" + + Select "Install and delete all tickets" + + Wait. The system may appear to freeze, just give it time. + + Press (A) to confirm + + Press (B) to decline installing tickets from CDN. +1. Press (Home) to exit FBI + +#### Section V - Remove CTRTransfer image + +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[0:] SDCARD` -> `gm9` +1. Press (X) on the CTRTransfer image `.bin` to delete it +1. Press (A) to confirm +1. Press (Start) to reboot your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/donations.txt b/_pages/et_EE/donations.txt new file mode 100644 index 0000000000..7f5e56f592 --- /dev/null +++ b/_pages/et_EE/donations.txt @@ -0,0 +1,9 @@ +--- +title: "Donations" # +layout: single-no-ads +--- + +[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://paypal.me/NintendoHomebrew){: .align-center} +[https://paypal.me/NintendoHomebrew](https://paypal.me/NintendoHomebrew) +{: .text-center} +{: .notice--info} diff --git a/_pages/et_EE/dsidumper.txt b/_pages/et_EE/dsidumper.txt new file mode 100644 index 0000000000..034e18f5cc --- /dev/null +++ b/_pages/et_EE/dsidumper.txt @@ -0,0 +1,37 @@ +--- +title: "DSiDumper" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +To dump system DSiWare, we use an existing homebrew launcher exploit. + +If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy your `movable.sed` file to the root of your SD card +1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - DSiWare Dumping + +1. Open the Homebrew Launcher using any method +1. Launch DSiWare Dumper from the list of homebrew + + This will dump a DSiWare application to SD root + + It is normal to see several failures. +1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide + +Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) +{: .notice--primary} + diff --git a/_pages/et_EE/f3-(linux).txt b/_pages/et_EE/f3-(linux).txt new file mode 100644 index 0000000000..402077d357 --- /dev/null +++ b/_pages/et_EE/f3-(linux).txt @@ -0,0 +1,66 @@ +--- +title: "F3 (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for checking your SD card for errors using F3. + +Depending on the size of your SD card and the speed of your computer, this process can take up to several hours! + +This page is for Linux users only. If you are not on Linux, check out the [H2testw (windows)](h2testw-(windows)) or [F3X (mac)](f3x-(mac)) pages. + +### What You Need + +* The latest version of [F3](https://github.com/AltraMayor/f3/releases/latest) + +### Instructions + +1. Unzip the f3 `.zip` file +1. `cd` into the f3 directory +1. Run `make` to compile F3 +1. Insert your SD card into your computer +1. Mount your SD card +1. Run `./f3write ` +1. Wait until the process is complete. See below for an example output. + +~~~ bash +$ ./f3write /media/michel/6135-3363/ +Free space: 29.71 GB +Creating file 1.h2w ... OK! +... +Creating file 30.h2w ... OK! +Free space: 0.00 Byte +Average Writing speed: 4.90 MB/s +~~~ + +1. Run `./f3read ` +1. Wait until the process is complete. See below for an example output. + +~~~ bash +$ ./f3read /media/michel/6135-3363/ + SECTORS ok/corrupted/changed/overwritten +Validating file 1.h2w ... 2097152/ 0/ 0/ 0 +... +Validating file 30.h2w ... 1491904/ 0/ 0/ 0 + + Data OK: 29.71 GB (62309312 sectors) +Data LOST: 0.00 Byte (0 sectors) + Corrupted: 0.00 Byte (0 sectors) + Slightly changed: 0.00 Byte (0 sectors) + Overwritten: 0.00 Byte (0 sectors) +Average Reading speed: 9.42 MB/s +~~~ + +___ + +If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on your SD card +{: .notice--success} + +If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it! +{: .notice--danger} + +### Return to [Get Started](get-started) +{: .notice--primary} diff --git a/_pages/et_EE/f3x-(mac).txt b/_pages/et_EE/f3x-(mac).txt new file mode 100644 index 0000000000..d8b57a9b97 --- /dev/null +++ b/_pages/et_EE/f3x-(mac).txt @@ -0,0 +1,37 @@ +--- +title: "F3X (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for checking your SD card for errors using F3X. + +Depending on the size of your SD card and the speed of your computer, this process can take up to several hours! + +This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages. + +### What You Need + +* The latest release of [F3X](https://github.com/insidegui/F3X/releases/latest) + +### Instructions + +1. Unzip the F3X `.zip` file +1. Insert your SD card into your computer +1. Run the F3X app +1. Select your SD card +1. Press "Start Test" +1. Wait until the process is complete. + +___ + +If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on your SD card +{: .notice--success} + +If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it! +{: .notice--danger} + +### Return to [Get Started](get-started) +{: .notice--primary} diff --git a/_pages/et_EE/faq.txt b/_pages/et_EE/faq.txt new file mode 100644 index 0000000000..eb00412965 --- /dev/null +++ b/_pages/et_EE/faq.txt @@ -0,0 +1,51 @@ +--- +title: "FAQ" +--- + +**Q:** *I am on the latest system version. Is my device hackable?* +**A:** Yes + +**Q:** *How do I update Luma3DS?* +**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) + +**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* +**A:** No. boot9strap is a superior method of loading hax that runs early in boot. + +**Q:** *How do I move saves from an existing Gateway setup to device installed games?* +**A:** See [this](https://gbatemp.net/threads/425743/) + +**Q:** *How risky is hacking my console?* +**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks. + +**Q:** *Can I run awesome homebrew and emulators with this?* +**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates. + +**Q:** *Can I use this to play games from other regions?* +**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps. + +**Q:** *Is it safe to update CFW SysNAND?* +**A:** Yes. This is safe, stop asking about it. + +**Q:** *Where should I go for support?* +**A:** For support (in English), ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp). + +**Q:** *Can I do this with a 4GB (or smaller) SD card?* +**A:** Yes! + +**Q:** *Can I use a 128GB (or larger) SD card?* +**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32. + +**Q:** *How do I move to a new SD card at the end of this?* +**A:** Just copy all the files to the new SD card. + +**Q:** *Can I keep my NNID?* +**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end. + +**Q:** *What about System Transfers?* +**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost). + +**Q:** *Can I do this without a computer (e.g. an Android phone)?* +**A:** All you need is the ability to put files on an SD card! + +**Q:** *Help! Something bad happened and now I cannot boot...* +**A:** Please look at the [troubleshooting guide](troubleshooting). diff --git a/_pages/et_EE/file-extensions-(windows).txt b/_pages/et_EE/file-extensions-(windows).txt new file mode 100644 index 0000000000..67b918bcd0 --- /dev/null +++ b/_pages/et_EE/file-extensions-(windows).txt @@ -0,0 +1,39 @@ +--- +title: "File Extensions (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for disabling Windows's default behavior of hiding file extensions. + +This will make it easier for you to find the referenced files in the rest of this guide. + +### Instructions + +#### Windows 10 / 8.1 / 8 + +1. Launch File Explorer by opening any directory, such as your SD card directory +1. Click the "View" option on the ribbon menu +1. Check the box labeled "File name extensions" + + ![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }}) + {: .notice--info} + +#### Windows 7 + +1. Open the start menu by clicking on it or using the Windows key +1. Search for "Folder Options" and select the corresponding result + + ![]({{ "/images/screenshots/windows-7-folder-options-start-menu.png" | absolute_url }}) + {: .notice--info} + +1. Click the "View" option at the top of the Folder Options menu +1. Uncheck the box labeled "Hide extensions for known file types" + + ![]({{ "/images/screenshots/windows-7-folder-options.png" | absolute_url }}) + {: .notice--info} + +### Return to [Get Started](get-started) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/et_EE/finalizing-setup.txt b/_pages/et_EE/finalizing-setup.txt new file mode 100644 index 0000000000..fe3d1c1bbb --- /dev/null +++ b/_pages/et_EE/finalizing-setup.txt @@ -0,0 +1,198 @@ +--- +title: "Finalizing Setup" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. + +In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. + +During this process, we also setup programs such as the following: + ++ **FBI** *(installs CIA formatted games and applications)* ++ **Anemone3DS** *(installs custom themes)* ++ **Checkpoint** *(backs up and restores save files for 3DS and DS games)* ++ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* ++ **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* ++ **DSP1** *(allows homebrew applications to have sound)* ++ **ctr-no-timeoffset** *(removes the rtc offset so that the home menu and rtc timestamps match)* + +### What You Need + +* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* +* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) +* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* +* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) +* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Create a folder named `cias` on the root of your SD card if it does not already exist +1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card +1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card +1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card +1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card +1. Copy `FBI.cia` to the `/cias/` folder on your SD card +1. Copy `DSP1.cia` to the `/cias/` folder on your SD card +1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card +1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist +1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - Updating the System + +If, while following a previous version of this guide, you CTRTransfered your *New 3DS* to 2.1.0, you should now [restore your NAND backup](godmode9-usage#restoring-a-nand-backup) before doing this section. +{: .notice--danger} + +If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section. +{: .notice--info} + +1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + + Updates while using B9S + Luma (what you have) are safe + + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section + + If this gives you an error, set your DNS settings to "auto" + + If this still gives you an error, [follow CTRTransfer](ctrtransfer), then try updating again + +#### Section III - Homebrew Launcher + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Launch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch ctr-no-timeoffset from the list of homebrew +1. Press (A) to set the offset to 0 + + This will set the system clock to match the RTC date&time (which we will set soon) +1. Press (Start) to return to the Homebrew Launcher +1. Launch FBI from the list of homebrew + +#### Section IV - Installing CIAs + +1. Navigate to `SD` -> `cias` +1. Select "\" +1. Select the "Install and delete all CIAs" option, then press (A) to confirm +1. Press (Home), then close Download Play + +#### Section V - DSP Dump + +1. Launch the DSP1 application +1. Once it has completed, press (B) to self-delete the app and return to the home menu + +#### Section VI - CTRNAND Luma3DS + +1. Power off your device +1. Launch GodMode9 by holding (Start) during boot +1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed +1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Scripts from Plailect's Guide" +1. Select "Setup Luma3DS to CTRNAND" +1. When prompted, press (A) to proceed +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. Press (A) to continue + +#### Section VII - Cleanup SD Card + +1. Select "Cleanup SD Card" +1. When prompted, press (A) to proceed +1. Press (A) to continue +1. Press (B) to return to the main menu + +#### Section VIII - Backup Essential Files + +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Navigate to `[M:] MEMORY VIRTUAL` +1. Press (A) on `boot9.bin` to select it +1. Select "Copy to 0:/gm9/out" +1. Press (A) to continue +1. Press (Home) to bring up the action menu +1. Select "Poweroff system" to power off your device +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, and `boot9.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device +1. Power on your device + +___ + +#### Information and Notes + +{% capture notice-10 %} +You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). + +This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. + +This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. +{% endcapture %} + +
{{ notice-10 | markdownify }}
+ +{% capture notice-6 %} +You will now boot Luma3DS CFW SysNAND by default. + +You can now hold (Select) on boot to launch the Luma3DS configuration menu. + +You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected). + +You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message). + +You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0) +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ +{% capture notice-6 %} +If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. + +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +{% endcapture %} + +
{{ notice-6 | markdownify }}
+ +For information on changing your device to another region, check out the [Region Changing](region-changing) page. +{: .notice--success} + +For information on using GodMode9's various features, check out the [GodMode9 Usage](godmode9-usage) page. +{: .notice--success} + +For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). +{: .notice--success} + +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +{: .notice--success} + +For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). +{: .notice--success} diff --git a/_pages/et_EE/flashing-ntrboot-(3ds-multi-system).txt b/_pages/et_EE/flashing-ntrboot-(3ds-multi-system).txt new file mode 100644 index 0000000000..7f91344288 --- /dev/null +++ b/_pages/et_EE/flashing-ntrboot-(3ds-multi-system).txt @@ -0,0 +1,58 @@ +--- +title: "Flashing ntrboot (3DS Multi System)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) + +This method requires temporary access to a second 3DS family device that is already running boot9strap. This does not require your flashcart to support either 3DS's version. + +Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +{: .notice--danger} + +### What You Need + +* Your ntrboot compatible flashcart +* Two 3DS family devices + + **The source 3DS**: the 3DS family device that is already running boot9strap + + **The target 3DS**: the device on stock firmware +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off **the source 3DS** +1. Insert **the source 3DS**'s SD card into your computer +1. Create a folder named `ntrboot` on the root of your SD card +1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card +1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on **the source 3DS**'s SD card +1. Reinsert **the source 3DS**'s SD card back into **the source 3DS** +1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS** + +#### Section II - Flashing ntrboot + +1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS** +1. Select "ntrboot_flasher" +1. Read the red screen warning +1. Press (A) to continue +1. Select your flashcart + + If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option +1. Select "Dump Flash" +1. Wait until the process is completed +1. Press (A) to continue +1. Press (A) to return to the main menu +1. Select "Inject Ntrboot" +1. Press (A) for retail unit ntrboot +1. Wait until the process is completed +1. Press (A) to return to the main menu +1. Press (B) to power off **the source 3DS** + +___ + +### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +{: .notice--primary} diff --git a/_pages/et_EE/flashing-ntrboot-(3ds-single-system).txt b/_pages/et_EE/flashing-ntrboot-(3ds-single-system).txt new file mode 100644 index 0000000000..9e505b10f2 --- /dev/null +++ b/_pages/et_EE/flashing-ntrboot-(3ds-single-system).txt @@ -0,0 +1,53 @@ +--- +title: "Flashing ntrboot (3DS Single System)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) + +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. + +Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +{: .notice--danger} + +### What You Need + +* Your ntrboot compatible flashcart +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your flashcart's SD card into your computer +1. Create a folder named `ntrboot` on the root of your flashcart's SD card +1. Copy `boot9strap_ntr.firm` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your flashcart's SD card +1. Copy `ntrboot_flasher_nds.nds` to your flashcart's SD card +1. Reinsert your flashcart's SD card back into your flashcart +1. Insert your ntrboot compatible DS / DSi flashcart into your device + +#### Section II - Flashing ntrboot + +1. Launch `ntrboot_flasher_nds.nds` on your device using your flashcart +1. Press (A) to continue +1. Use (Up) and (Down) to select your flashcart +1. Press (A) to continue +1. Select "Dump flash" to make a backup of your flashcart's memory +1. Input the key combo given to confirm +1. Press (A) to continue +1. Use (Up) and (Down) to select your flashcart +1. Press (A) to continue +1. Select "Inject FIRM" to install boot9strap to your flashcart +1. Input the key combo given to confirm +1. Press (A) to continue +1. Power off your device + +___ + +### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +{: .notice--primary} diff --git a/_pages/et_EE/flashing-ntrboot-(dsi).txt b/_pages/et_EE/flashing-ntrboot-(dsi).txt new file mode 100644 index 0000000000..2c3d01a324 --- /dev/null +++ b/_pages/et_EE/flashing-ntrboot-(dsi).txt @@ -0,0 +1,48 @@ +--- +title: "Flashing ntrboot (DSi)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) + +This method requires temporary access to a Nintendo DSi that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your DSi. This means that your flashcart must support launching `.nds` files on your DSi's version. See the flashcart table on [ntrboot](ntrboot) for more information. + +Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +{: .notice--danger} + +### What You Need + +* Your ntrboot compatible flashcart +* Two devices + + **The source DSi**: the Nintendo DSi which is compatible with your flashcart + + **The target 3DS**: the 3DS family device on stock firmware +* The latest release of [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) *(`dsi` flasher; not the standard flasher)* + +### Instructions + +#### Section I - Prep Work + +1. Power off **the source DSi** +1. Insert your flashcart's SD card into your computer +1. Copy `ds_ntrboot_flasher_dsi.nds` to your flashcart's SD card +1. Reinsert your flashcart's SD card back into your flashcart +1. Insert your ntrboot compatible DS / DSi flashcart into **the source DSi** + +#### Section II - Flashing ntrboot + +1. Launch `ds_ntrboot_flasher_dsi.nds` on **the source DSi** using your flashcart +1. Press (A) to continue +1. Use (Up) and (Down) to select your flashcart +1. Press (A) to continue +1. Press (A) to "inject ntrboothax" +1. Press (A) to select "RETAIL" +1. Press (A) to continue +1. Select "EXIT" + +___ + +### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +{: .notice--primary} diff --git a/_pages/et_EE/flashing-ntrboot-(nds).txt b/_pages/et_EE/flashing-ntrboot-(nds).txt new file mode 100644 index 0000000000..f7a331c0eb --- /dev/null +++ b/_pages/et_EE/flashing-ntrboot-(nds).txt @@ -0,0 +1,57 @@ +--- +title: "Flashing ntrboot (NDS)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) + +This method requires temporary access to a Nintendo DS or Nintendo DS Lite that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your NDS. + +Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +{: .notice--danger} + +### What You Need + +* Your ntrboot compatible flashcart +* Two devices + + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + + **The target 3DS**: the 3DS family device on stock firmware +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off **the source NDS / NDSL** +1. Insert your flashcart's SD card into your computer +1. Create a folder named `ntrboot` on the root of your flashcart's SD card +1. Copy `boot9strap_ntr.firm` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your flashcart's SD card +1. Copy `ntrboot_flasher_nds.nds` to your flashcart's SD card +1. Reinsert your flashcart's SD card back into your flashcart +1. Insert your ntrboot compatible DS / DSi flashcart into **the source NDS / NDSL** + +#### Section II - Flashing ntrboot + +1. Launch `ntrboot_flasher_nds.nds` on **the source NDS / NDSL** using your flashcart +1. Press (A) to continue +1. Use (Up) and (Down) to select your flashcart +1. Press (A) to continue +1. Select "Dump flash" to make a backup of your flashcart's memory +1. Input the key combo given to confirm +1. Press (A) to continue +1. Use (Up) and (Down) to select your flashcart +1. Press (A) to continue +1. Select "Inject FIRM" to install boot9strap to your flashcart +1. Input the key combo given to confirm +1. Press (A) to continue +1. Power off **the source NDS / NDSL** +1. Eject your flashcart from **the source NDS / NDSL** + +___ + +### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/et_EE/get-started.txt b/_pages/et_EE/get-started.txt new file mode 100644 index 0000000000..0462e2a9f0 --- /dev/null +++ b/_pages/et_EE/get-started.txt @@ -0,0 +1,97 @@ +--- +title: "Get Started" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. + +Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. + +In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. + +Your device version can be found at the bottom right of the top screen of the System Settings. + +![]({{ "/images/screenshots/system-version.png" | absolute_url }}) +{: .notice--info} + +**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** + +For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. + +If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. + +This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). +{: .notice--primary} + +Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! +{: .notice--info} + +Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +{: .notice--warning} + +{% capture notice-1 %} +There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: + +1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" +1. Disable the "Sending of System Information" option +1. Exit the System Settings +1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) + + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) +1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" +1. Disable the "Show friends what you're playing" option +1. Exit your Friend List + +{% endcapture %} + +
{{ notice-1 | markdownify }}
+ +### Version Table + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
FromToNo BrowserBrowser
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.11.0Update to latest firmware or use an "All Versions" Method
11.12.011.13.0Seedminer
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

diff --git a/_pages/et_EE/godmode9-usage.txt b/_pages/et_EE/godmode9-usage.txt new file mode 100644 index 0000000000..5374cffab2 --- /dev/null +++ b/_pages/et_EE/godmode9-usage.txt @@ -0,0 +1,238 @@ +--- +title: "GodMode9 Usage" +--- + +{% include toc title="Table of Contents" %} + +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +{: .notice--primary} + +### Required Reading + +GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, the FAT partitions inside your SysNAND and EmuNAND, and basically anything else. Among other functionality, you can copy, delete, rename files, and create folders. + +Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. + +GodMode9 is powerful software that has the capability to modify essentially anything on your console. Though many of these modifications are locked behind a permissions system, and it is impossible to accidentally perform dangerous actions without deliberately unlocking permissions, you should still follow instructions carefully and keep backups just in case. + +## Updating GodMode9 + +Some of the instructions below are only applicable to the latest version of GodMode9, and as such you should follow this section to update your copy before continuing. Overwrite any existing files. +{: .notice--info} + +### What You Need + +* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) + +### Instructions + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card +1. Reinsert your SD card into your device + +## Creating a NAND Backup + +1. Launch GodMode9 by holding (Start) during boot +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +## Restoring a NAND Backup + +1. Launch GodMode9 by holding (Start) during boot +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` from your computer to the `/gm9/out/` folder on your SD card +1. Reinsert your SD card into your device +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Restore Options" +1. Select "SysNAND Restore (safe)" +1. Select your NAND backup +1. Press (A) to unlock SysNAND (lvl3) writing, then input the key combo given + + This will not overwrite your boot9strap installation + + This process will take some time +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted + +## Injecting any .CIA app into Health & Safety + +For organizational purposes, copy the `.cia` file you wish to inject to the `/cias/` folder on your SD card +{: .notice--info} + +Note that it is not possible to inject files into Health & Safety that are larger than it (including games and other large applications) +{: .notice--info} + +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[0:] SDCARD` -> `cias` +1. Press (A) on your `.cia` to select it, then select "CIA image options...", then select "Mount image to drive" +1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S" +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. Press (A) to continue +1. Press (A) to relock write permissions if prompted + +## Restoring Health & Safety after injecting a .CIA app + +This will only work if the Health & Safety injection was performed by GodMode9 (not Decrypt9 or Hourglass9). +{: .notice--info} + +1. Launch GodMode9 by holding (Start) during boot +1. Press (Home) to bring up the action menu +1. Select "More..." +1. Select "Restore H&S" +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. Press (A) to relock write permissions if prompted + +## Dumping a Game Cartridge + +{% capture notice %} +Insert the game cartridge you intend to dump into your device + + 3DS game cartridges will be dumped to an installable `.cia` format + + NDS game cartridges will be dumped to a non-installable `.nds` format compatible with flashcarts and emulators +{% endcapture %} + +
{{ notice | markdownify }}
+ +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[C:] GAMECART` +1. Follow the steps applicable to your game cartridge: + + **3DS Game Cartridge:** Press (A) on `[TitleID].trim.3ds` to select it, then select "NCSD image options...", then select "Build CIA from file" + + **NDS Game Cartridge:** Press (A) on `[TitleID].trim.nds` to select it, then select "Copy to 0:/gm9/out" +1. Your installable `.cia` or non-installable `.nds` formatted file will be outputted to the `/gm9/out/` folder on your SD card + +## Dumping a Title + +1. Launch GodMode9 by holding (Start) during boot +1. Hover over the drive applicable to the type of title you wish to dump: + + **User Installed Title**: `[A:] SYSNAND SD` + + **System Title**: `[1:] SYSNAND CTRNAND` +1. Hold (R) and press (A) at the same time to open the drive options +1. Select "Search for titles" +1. Press (A) to continue +1. Press (A) on the `.tmd` file to select it, then select "TMD file options...", then select "Build CIA (standard)" +1. Your installable `.cia` formatted file will be outputted to the `/gm9/out/` folder on your SD card + +## Converting a .3DS to .CIA + +{% capture notice %} ++ For organizational purposes, copy each `.3ds` file you wish to convert to the `/cias/` folder on your SD card + + Note that if you wish to convert a `.3ds` file that is already on a flashcart, you should follow [Dumping a Game Cartridge](#dumping-a-game-cartridge) +{% endcapture %} + +
{{ notice | markdownify }}
+ +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[0:] SDCARD` -> `cias` +1. Press (A) on your `.3ds` file to select it, then select "NCSD image options...", then select "Build CIA from file" +1. Your installable `.cia` formatted file will be outputted to the `/gm9/out/` folder on your SD card + +## Backup GBA VC Saves + +The game will be outputted to the `/gm9/out/` folder on your SD card with the name `.gbavc.sav`. +{: .notice--info} + +To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by hovering over `[A:] SYSNAND SD`, holding (R) and pressing (A) at the same time, then selecting "Search for titles". +{: .notice--info} + +1. Do the following process for each GBA VC game that you want to backup the save for: + + Launch the GBA VC game + + Exit the GBA VC game + + Boot your device while holding (Start) to launch the Luma3DS chainloader menu + + Launch GodMode9 by pressing (A) + + Navigate to `[S:] SYSNAND VIRTUAL` + + Press (A) on `agbsave.bin` to select it + + Select "AGBSAVE options..." + + Select "Dump GBA VC save" + + Press (A) to continue + + Press (Start) to reboot your device + +## Restore GBA VC Saves + +To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by hovering over `[A:] SYSNAND SD`, holding (R) and pressing (A) at the same time, then selecting "Search for titles". +{: .notice--info} + +1. Do the following process for each GBA VC game that you want to restore the save for: + + Launch the GBA VC game + + Exit the GBA VC game + + Boot your device while holding (Start) to launch the Luma3DS chainloader menu + + Launch GodMode9 by pressing (A) + + Navigate to `[0:] SDCARD` -> `gm9` + + Press (Y) on the `.gbavc.sav` file you wish to restore to copy it + + Press (B) to return to the main menu + + Navigate to `[S:] SYSNAND VIRTUAL` + + Press (A) on `agbsave.bin` to select it + + Select "AGBSAVE options..." + + Select "Inject GBA VC save" + + Press (A) to continue + + Press (Start) to reboot your device + + Launch the GBA VC game + + Exit the GBA VC game + +## Format an SD card + +**Note that this will erase the contents of your SD card!** +{: .notice--danger} + +1. Launch GodMode9 by holding (Start) during boot +1. Press (Home) to bring up the action menu +1. Select "More..." +1. Select "SD format menu" +1. Select any EmuNAND options you wish to use + + Most users will want to select "No EmuNAND" +1. Select "Auto" +1. Press (A) to accept the label `GM9SD` + + Optionally, you may input a custom name for the SD card +1. When prompted, input the key combo given to confirm + +## Encrypting / Decrypting a .CIA file + +For organizational purposes, copy each `.cia` file you wish to encrypt / decrypt to the `/cias/` folder on your SD card +{: .notice--info} + +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[0:] SDCARD` -> `cias` +1. Press (A) on the `.cia` file to select it, then select "CIA image options..." +1. Select the option to perform the desired function: + + **Encrypt to 0:/gm9/out:** Create an encrypted copy of the selected `.cia` file in the `/gm9/out/` folder on your SD card + + **Decrypt to 0:/gm9/out:** Create a decrypted copy of the selected `.cia` file in the `/gm9/out/` folder on your SD card + + **Encrypt inplace:** Replace the selected `.cia` file with an encrypted version + + **Decrypt inplace:** Replace the selected `.cia` file with a decrypted version +1. Your encrypted / decrypted `.cia` will be outputted to the desired location + +## Removing an NNID without formatting your device + +1. Launch GodMode9 by holding (Start) during boot +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Scripts from Plailect's Guide" +1. Select "Remove NNID" +1. Press (A) to continue +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Press (Start) to reboot your device diff --git a/_pages/et_EE/h2testw-(windows).txt b/_pages/et_EE/h2testw-(windows).txt new file mode 100644 index 0000000000..f1e5bd1b44 --- /dev/null +++ b/_pages/et_EE/h2testw-(windows).txt @@ -0,0 +1,40 @@ +--- +title: "H2testw (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for checking your SD card for errors using h2testw. + +Depending on the size of your SD card and the speed of your computer, this process can take up to several hours! + +This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages. + +### What You Need + +* The latest version of [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip) + +### Instructions + +1. Copy `h2testw.exe` from the h2testw `.zip` to your desktop +1. Insert your SD card into your computer +1. Run `h2testw.exe` +1. Select "English" +1. Click "Select target" +1. Select your SD card's drive letter +1. Ensure "all available space" is selected +1. Click "Write + Verify" +1. Wait until the process is completed + +___ + +If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on your SD card +{: .notice--success} + +If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it! +{: .notice--danger} + +### Return to [Get Started](get-started) +{: .notice--primary} diff --git a/_pages/et_EE/home.txt b/_pages/et_EE/home.txt new file mode 100644 index 0000000000..2d99705764 --- /dev/null +++ b/_pages/et_EE/home.txt @@ -0,0 +1,91 @@ +--- +layout: splash +title: "3DS Hacks Guide" # +header: + overlay_color: "#5e616c" # + overlay_image: /images/home-page-feature.jpg + overlay_filter: 0.5 + caption: +excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" +--- + +For complete guides to homebrew and custom firmware for other devices, check out [Hacks.Guide](https://hacks.guide). +{: .notice--primary} + +___ + +Thoroughly read all of the introductory pages (including this one!) before proceeding. +{: .notice--warning} + +{% capture notice-1 %} +This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! +If you have a developer ("PANDA") console, check out the [Panda 3DS Hacks Guide](https://panda.hacks.guide). +{% endcapture %} + +
{{ notice-1 | markdownify }}
+ +{% capture notice-1 %} +This guide is available in other languages! +Click the icon at the top right of the page to change the language. +Alternatively, click [here](https://crowdin.com/project/3ds-guide) to help to keep these translations up to date. +{% endcapture %} + +
{{ notice-1 | markdownify }}
+ +This guide needs *your* help to seed [these]({{ "rss.xml" | absolute_url }}) torrents! +{: .notice--primary} + +## What is Homebrew? + +[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. This includes homebrew tools, applications, games, and emulators. + +In many cases, running homebrew on your device is 100% free using just the Nintendo 3DS Sound app. There are also various other exploits in commercial games and the browser to get homebrew running. + +## What is Custom Firmware? + +**Custom Firmware** ("CFW") enables you to use more advanced hacks that userland homebrew can't easily do. For instance, signature patches let you install unsigned titles that appear right on your HOME Menu. + +CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0). + +## What does this guide install? + +This guide has the end goal of taking a completely unmodified 3DS from stock +firmware to boot9strap powered Custom Firmware. On some versions, it utilizes homebrew as a stepping off point, but Custom Firmware is still the goal. + +boot9strap is the newest and best method of launching Custom Firmware that gives us nearly full control of the system only milliseconds into boot, which is similar to the effect of BootMii for the Wii. It gives us even earlier control than arm9loaderhax did, and, unlike standard sighax, boot9strap uses an NDMA overwrite exploit in order to gain Boot9 code execution. This means that any console running boot9strap is capable of dumping the console unique OTP (`OTP.bin`), the ARM11 bootrom (`boot11.bin`), and the ARM9 bootrom (`boot9.bin`). + +The benefits of boot9strap over other Custom Firmware launch methods are numerous, and as such it is recommended to use this guide over any other that relies on outdated software (such as menuhax + rxTools, arm9loaderhax, or even normal sighax). + +For information on how boot9strap works, please see [this paper](https://arxiv.org/abs/1802.00359). + +For a list of each of the calculated sighax signatures, see [this gist](https://gist.github.com/SciresM/cdd2266efb80175d37eabbe86f9d8c52). + +## What can I do with Custom Firmware? + ++ Play all game cards and eShop games, regardless of region ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Use "ROM hacks" for games that you own ++ Take gameplay and application screenshots ++ Backup, edit, and restore saves for many games ++ Play games for older systems with various emulators, using RetroArch or other standalone emulators. (Works best with a New Nintendo 3DS) ++ Install homebrew titles to your system, and have them appear on your HOME Menu ++ Dump your game cards to a format you can install, and play them without needing the card ++ New 3DS or New 2DS only: stream live gameplay to your PC wirelessly with NTR CFW ++ Run many old Nintendo DS flash carts that were blocked long ago or never worked on Nintendo 3DS ++ Safely update to the latest system version without fear of losing access to homebrew + +## What do I need to know before starting? + ++ **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** ++ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). ++ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! ++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). ++ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. + +___ + +### Continue to [Get Started](get-started) +{: .notice--primary} diff --git a/_pages/et_EE/homebrew-launcher-(alternatives).txt b/_pages/et_EE/homebrew-launcher-(alternatives).txt new file mode 100644 index 0000000000..18fc2717bd --- /dev/null +++ b/_pages/et_EE/homebrew-launcher-(alternatives).txt @@ -0,0 +1,85 @@ +--- +title: "Homebrew Launcher (Alternatives)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This udsploit/safehax exploit is compatible with versions 9.0.0 through 11.3.0. + +The Homebrew Launcher has many different entrypoints, or methods of launching. + +If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below. + +Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. + +To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). + +### What You Need + +* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) +* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* + +### Instructions + +1. Power off your device +1. Insert your SD card into your computer +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Copy `boot.3dsx` to the root of your SD card +1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` + + ![]({{ "/images/screenshots/boot9strap-hb-file-layout.png" | absolute_url }}) + {: .notice--info} + +1. Reinsert your SD card into your device +1. Power on your device +1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: + + | | Requires | Editions | Devices | Regions | Game Versions | System Versions | + |:-:|:-:|:-:|:-:|:-:|:-:|:-:| + | [browserhax](https://yls8.mtheall.com/3dsbrowserhax.php) | Nothing | Preinstalled | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-2 up to and including 11.0.0-33 | + | [oot3dhax](https://github.com/yellows8/oot3dhax) | [*Ocarina of Time 3D*](https://amzn.to/2fkaKdp),
Either a powersaves or another 3DS which already has the Homebrew Launcher | Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | + | [smashbroshax](https://gbatemp.net/threads/397194/) | [*Super Smash Bros*](https://amzn.to/2ftGA72) | Cart, eShop | New | EUR, JPN, USA | <1.1.3,
Carts with "amiibo" on the cover are preinstalled with v1.1.4 | 9.0.0-X up to and including 11.3.0-X | + | [supermysterychunkhax](https://smd.salthax.org/) | [*Pokemon Super Mystery Dungeon*](https://amzn.to/2ebxZ75),
Another 3DS which already has the Homebrew Launcher | Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.9.0-X (USA/JPN) / 10.2.0-X (EUR) up to and including 11.0.0-X | + | [freakyhax](http://plutooo.github.io/freakyhax/) | [*Freakyforms Deluxe*](https://amzn.to/2f6eHO7) | eShop, Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | + | [basehaxx](http://mrnbayoh.github.io/basehaxx/) | *Pokemon [Omega Ruby](https://amzn.to/2eRILNQ)/[Alpha Sapphire](https://amzn.to/2ebGrmN)*,
Another 3DS which already has the Homebrew Launcher | Cart | New, Old, 2DS | EUR, JPN, USA | 1.0, 1.4 | 9.0.0-X up to and including 11.3.0-X | + | [BASICSploit](https://mrnbayoh.github.io/basicsploit/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | New, Old, 2DS | USA | 3.2.1 | 9.0.0-X up to and including 11.0.0-X | + | [smilehax](https://plutooo.github.io/smilehax/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | New, Old, 2DS | JPN, USA | 3.3.1 | 9.0.0-X up to and including 11.0.0-X | + | [stickerhax](https://github.com/yellows8/stickerhax) | [*Paper Mario: Sticker Star*](https://amzn.to/2f6aDx8),
Another 3DS which already has the Homebrew Launcher | eShop, Cart | New, Old, 2DS | EUR, JPN, KOR, USA | All | 9.0.0-X up to and including 11.3.0-X | + | [Ninjhax 2](http://smealum.github.io/ninjhax2/) | [*Cubic Ninja*](https://amzn.to/2eRI1by) | eShop, Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | + | [Notehax](https://mrnbayoh.github.io/notehax/) | [*Flipnote Studio 3D*](https://my.nintendo.com/rewards/0391c34c430369c0) | eShop | New, Old, 2DS | EUR, JPN, USA | 1.3.1 (JPN) / 1.0.0 (EUR/USA) | 9.0.0-X up to and including 11.5.0-X | + | [RPwnG](https://mrnbayoh.github.io/rpwng/) | [*RPG Maker Player*](http://www.nintendo.com/games/detail/rpg-maker-player-3ds) | eShop | New, Old, 2DS | EUR, JPN, USA | 1.1.4 (EUR) / 1.1.2 (JPN/USA) | 9.0.0-X up to and including 11.5.0-X | + | [GenHax](https://github.com/svanheulen/genhax_proxy_installer) | [*Monster Hunter X*](http://amzn.to/2gsk6Tk) | eShop | New | JPN | All | 9.9.0-X up to and including 11.2.0-X | + {: .notice--info} + + + + +1. Your device should load the Homebrew Launcher + + ![]({{ "/images/screenshots/homebrew-launcher.png" | absolute_url }}) + {: .notice--info} + +### Continue to [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) +{: .notice--primary} diff --git a/_pages/et_EE/homebrew-launcher-(pichaxx).txt b/_pages/et_EE/homebrew-launcher-(pichaxx).txt new file mode 100644 index 0000000000..f5a8f4721d --- /dev/null +++ b/_pages/et_EE/homebrew-launcher-(pichaxx).txt @@ -0,0 +1,54 @@ +--- +title: "Homebrew Launcher (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. + +If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +{: .notice--success} + +If you already have Pokemon Picross, this process will overwrite your game's save file! +{: .notice--warning} + +### What You Need + +* The free eShop game "Pokemon Picross" +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* + +### Instructions + +#### Section I - Prep Work + +1. Copy `boot.3dsx` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` + + if you do not see the `.bin` extension, do not add it to the end of the filename +1. Create a folder named `3ds` on the root of your SD card if it does not already exist + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + This `` folder will be another 32 letter/number folder inside the `` folder +1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have loaded the Homebrew Launcher + + You may see an error stating there are no applications found. +1. Power off your device. + +___ + +### Continue to [DSiWare Dumper](dsidumper) +{: .notice--primary} diff --git a/_pages/et_EE/homebrew-launcher-(soundhax).txt b/_pages/et_EE/homebrew-launcher-(soundhax).txt new file mode 100644 index 0000000000..9bba75dadc --- /dev/null +++ b/_pages/et_EE/homebrew-launcher-(soundhax).txt @@ -0,0 +1,76 @@ +--- +title: "Homebrew Launcher (Soundhax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +The Homebrew Launcher has many different entrypoints, or methods of launching. + +Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. + +Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. + +{% capture notice-1 %} + +Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. + +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +{% endcapture %} + +
{{ notice-1 | markdownify }}
+ +### What You Need + +* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* +* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* + +### Instructions + +1. Power off your device +1. Insert your SD card into your computer +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card +1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` + + ![]({{ "/images/screenshots/boot9strap-hb-file-layout.png" | absolute_url }}) + {: .notice--info} + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch Nintendo 3DS Sound + + ![]({{ "/images/screenshots/soundhax-welcome.png" | absolute_url }}) + {: .notice--info} + +1. If you've never opened Nintendo 3DS Sound before and get tips on how to use it from a bird icon, go through all of the bird tips, then close the app normally and relaunch it + + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done +1. Go to `/SDCARD`, then play "<3 nedwill 2016" + + This may take many tries + + If it freezes, just force the console to power off by holding the power button, then try again + + If you get a red screen, ensure you copied `boot.3dsx` (the Homebrew Launcher) to the root of your SD card + + ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) + {: .notice--info} + +1. If the exploit was successful, your device will have loaded the Homebrew Launcher + + ![]({{ "/images/screenshots/homebrew-launcher.png" | absolute_url }}) + {: .notice--info} + +___ + +### Continue to [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) +{: .notice--primary} diff --git a/_pages/et_EE/homebrew-launcher-(steelhax).txt b/_pages/et_EE/homebrew-launcher-(steelhax).txt new file mode 100644 index 0000000000..681be6021f --- /dev/null +++ b/_pages/et_EE/homebrew-launcher-(steelhax).txt @@ -0,0 +1,63 @@ +--- +title: "Homebrew Launcher (Steelhax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. + +If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +{: .notice--success} + +If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +{: .notice--warning} + +### What You Need + +* The free eShop game "Steel Diver: Sub Wars" +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* + +### Instructions + +#### Section I - Prep Work + +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Copy `boot.3dsx` to the root of your SD card +1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card +1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` + +#### Section II - Steelminer + +1. Insert your SD card into your device +1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file + + Decline the game update when prompted + + If you have already updated the game, use the Data Management menu of the System Settings to delete the update +1. Exit "Steel Diver: Sub Wars" +1. Power off your device +1. Insert your SD card into your computer +1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer +1. Select your `movable.sed` file +1. Select "Start!" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card + + **EUR Region**: `000d7e00` + + **JPN Region**: `000d7c00` + + **USA Region**: `000d7d00` +1. Copy the new downloaded save file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Steel Diver: Sub Wars" +1. If the exploit was successful, your device will have loaded the Homebrew Launcher + + You may see an error stating there are no applications found. +1. Power off your device. + +___ + +### Continue to [DSiWare Dumper](dsidumper) +{: .notice--primary} diff --git a/_pages/et_EE/installing-boot9strap-(2xrsa).txt b/_pages/et_EE/installing-boot9strap-(2xrsa).txt new file mode 100644 index 0000000000..63481de72e --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(2xrsa).txt @@ -0,0 +1,58 @@ +--- +title: "Installing boot9strap (2xrsa)" +--- + +{% include toc title="Table of Contents" %} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `arm9.bin` and `arm11.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + + ![]({{ "/images/screenshots/boot9strap-2xrsa-file-layout.png" | absolute_url }}) + {: .notice--info} + +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - Launching SafeB9SInstaller + +1. Launch the browser and go to the following URL on your device + + `http://2xrsa.hacks.guide` + + If you are on a New 3DS, New 2DS, or Old 2DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up + + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 CTRTransfer + + If you forgot to disable parental controls before CTRTransfering or otherwise cannot access wireless settings, note that the device will autoconnect to any network named `attwifi` with no password + + If you get another error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/installing-boot9strap-(browser).txt b/_pages/et_EE/installing-boot9strap-(browser).txt new file mode 100644 index 0000000000..35b6370080 --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(browser).txt @@ -0,0 +1,58 @@ +--- +title: "Installing boot9strap (Browser)" +--- + +{% include toc title="Table of Contents" %} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card + + ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) + {: .notice--info} + +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - Launching SafeB9SInstaller + +1. Launch the browser and go to one of the following URLs on your device + + `https://dukesrg.github.io/?SafeB9SInstaller.dat` + + `http://www.reboot.ms/3ds/load.html?Launcher.dat` + + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` + + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/installing-boot9strap-(fredtool).txt b/_pages/et_EE/installing-boot9strap-(fredtool).txt new file mode 100644 index 0000000000..46eedbe264 --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(fredtool).txt @@ -0,0 +1,102 @@ +--- +title: "Installing Boot9strap (Fredtool)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. + +This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). + +### What You Need + +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) +* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.nds` (B9STool) to the root of your SD card +1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card + +#### Section II - Fredtool + +1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Select your `movable.sed` file for the "Your movable.sed" field +1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field +1. Complete the "I'm not a robot" captcha +1. Select "Start" +1. Wait for the process to complete +1. When the process has completed, download your modified DSiWare archive from the site + + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + This `` folder will be another 32 letter/number folder inside the `` folder + + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder +1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Under the "SD Card" section, select the "Haxxxxxxxxx!" title +1. Select "Copy", then select "OK" +1. Return to main menu of the System Settings +1. Navigate to `Internet Settings` -> `Nintendo DS Connections`, then select "OK" +1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio + +#### Section III - Flipnote Exploit + +If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/). +{: .notice--info} + +1. Complete the initial setup process for the launched game until you reach the main menu + + Select the left option whenever prompted during the setup process +1. Using the touch-screen, select the large left box, then select the box with an SD card icon +1. Once the menu loads, select the face icon, then the bottom right icon to continue +1. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen +1. Select the second button along the top with a film-reel icon +1. Scroll right until reel "3/3" is selected +1. Tap the third box with the letter "A" in it +1. Scroll left until reel "1/3" is selected +1. Tap the fourth box with the letter "A" in it +1. If the exploit was successful, your device will have loaded b9sTool +1. Using the D-Pad, move to "Install boot9strap" + + If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open Nintendo DS Connections and start over from the beginning of Section III +1. Press (A), then press START and SELECT at the same time to begin the process +1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device + + You may have to force power off by holding the power button + + If you see the Luma Configuration screen, continue with the guide without powering off + +#### Section IV - Configuring Luma3DS + +1. Boot your device while holding (Select) to launch the Luma configuration menu + + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring DS Connection Settings + +1. Power off your device +1. Insert your SD card into your computer +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card + + Replace the existing `42383841.bin` file +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Under the "SD Card" section, select the "Nintendo DSi™" title +1. Select "Copy", then select "OK" + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/installing-boot9strap-(frogtool).txt b/_pages/et_EE/installing-boot9strap-(frogtool).txt new file mode 100644 index 0000000000..01691c1a1d --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(frogtool).txt @@ -0,0 +1,80 @@ +--- +title: "Installing Boot9strap (Frogtool)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. + +This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). + +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) +* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) +* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy your `movable.sed` file to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card +1. Copy `frogcert.bin` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - Patching DS Download Play + +1. Open the Homebrew Launcher using any method +1. Launch Frogtool from the list of homebrew +1. Select the "INJECT patched DS Download Play" option +1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then select "BOOT patched DS Download Play" +1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio + +#### Section III - Flipnote Exploit + +If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/). +{: .notice--info} + +1. Complete the initial setup process for the launched game until you reach the main menu + + Select the left option whenever prompted during the setup process +1. Using the touch-screen, select the large left box, then select the box with an SD card icon +1. Once the menu loads, select the face icon, then the bottom right icon to continue +1. Select the frog icon at the bottom left + + Alternatively, press (X) or (UP) on the D-Pad depending on which is shown on the top screen +1. Select the second button along the top with a film-reel icon +1. Scroll right until reel "3/3" is selected +1. Tap the third box with the letter "A" in it +1. Scroll left until reel "1/3" is selected +1. Tap the fourth box with the letter "A" in it +1. If the exploit was successful, your device will have loaded b9sTool +1. Using the D-Pad, move to "Install boot9strap" +1. Press (A), then press START and SELECT at the same time to begin the process +1. Once complete and the bottom screen says "done.", exit b9sTool, then power off your device + + You may have to force power off by holding the power button + + If you see the Luma configuration menu, continue without powering off + +#### Section IV - Configuring Luma3DS + +1. Boot your device while holding (Select) to launch the Luma configuration menu + + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/installing-boot9strap-(hardmod).txt b/_pages/et_EE/installing-boot9strap-(hardmod).txt new file mode 100644 index 0000000000..7ff5108da8 --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(hardmod).txt @@ -0,0 +1,96 @@ +--- +title: "Installing boot9strap (Hardmod)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). + +This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). + +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). + +To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). + +This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for. + +### What You Need + +* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The `.firm` corresponding to your device and version: + +| Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | +|-|-|:-:|:-:| +| 1.0.0 | 2.27-0 | [2.27-0_1.0_OLD.firm](magnet:?xt=urn:btih:5c86edc67a1827991567b3c326a4182b66647d07&dn=2.27-0_1.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 1.1.0 | 2.28-0 | [2.28-0_1.1_OLD.firm](magnet:?xt=urn:btih:7c7696ff18e7d83a638b9c80f83052f763fb0fa5&dn=2.28-0_1.1_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 2.0.0 | 2.29-7 | [2.29-7_2.0_OLD.firm](magnet:?xt=urn:btih:9ba9245a8cc22ddf9f4cd22d7572b443efd47b2d&dn=2.29-7_2.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 2.1.0 | 2.30-18 | [2.30-18_2.1_OLD.firm](magnet:?xt=urn:btih:3584e44a83fc0e9c9e1bd31e38982b2bd62b9436&dn=2.30-18_2.1_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 2.2.0 | 2.31-40 | [2.31-40_2.2_OLD.firm](magnet:?xt=urn:btih:b5148ff900e14710494965f173f16d3a05c6b072&dn=2.31-40_2.2_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 3.0.0 | 2.32-15 | [2.32-15_3.0_OLD.firm](magnet:?xt=urn:btih:43034e15ae11eb2faccfd3148f4283bedd2eeb88&dn=2.32-15_3.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 4.0.0 | 2.33-4 | [2.33-4_4.0_OLD.firm](magnet:?xt=urn:btih:a86afa2f784335446b6b9feebd5eb887a3bd2067&dn=2.33-4_4.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 4.1.0 - 4.5.0 | 2.34-0 | [2.34-0_4.1_OLD.firm](magnet:?xt=urn:btih:5e66281b3be1e7a26830e13357e9a3a998c12e11&dn=2.34-0_4.1_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 5.0.0 | 2.35-6 | [2.35-6_5.0_OLD.firm](magnet:?xt=urn:btih:b759e4003e5e16cbffcf894f5ec968628eb2a304&dn=2.35-6_5.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 5.1.0 | 2.36-0 | [2.36-0_5.1_OLD.firm](magnet:?xt=urn:btih:7e6ec0fcb79928cfd2073196ee97755d27cbb9c8&dn=2.36-0_5.1_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 6.0.0 | 2.37-0 | [2.37-0_6.0_OLD.firm](magnet:?xt=urn:btih:2d99d3d742bdf5579817adf6906a619cb901c7f0&dn=2.37-0_6.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 6.1.0 - 6.4.0 | 2.38-0 | [2.38-0_6.1_OLD.firm](magnet:?xt=urn:btih:79dfcc3c12147f30b0d32acf47059c64cc530ab7&dn=2.38-0_6.1_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 7.0.0 - 7.1.0 | 2.39-4 | [2.39-0_7.0_OLD.firm](magnet:?xt=urn:btih:7e11151de6873de92eae0c1052fe5b88ccda0c07&dn=2.39-0_7.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 7.2.0 | 2.40-0 | [2.40-0_7.2_OLD.firm](magnet:?xt=urn:btih:29a648302eb6b3833858a289147c78608622695b&dn=2.40-0_7.2_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | +| 8.0.0 - 8.1.0 | 2.44-6 / 2.45-5 | [2.44-6_8.0_OLD.firm](magnet:?xt=urn:btih:d07a3cc54ab50da5a1294727e5974b681417a90d&dn=2.44-6_8.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.45-5_8.1_NEW.firm](magnet:?xt=urn:btih:bab35d663d1316e037985b002becd47f187f0f31&dn=2.45-5_8.1_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 9.0.0 - 9.2.0 | 2.46-0 | [2.46-0_9.0_OLD.firm](magnet:?xt=urn:btih:1cda7efdc0b096c64bc2aff09653fb6a94f70802&dn=2.46-0_9.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.46-0_9.0_NEW.firm](magnet:?xt=urn:btih:62089eda709232a20c03c73064f18714e19476b6&dn=2.46-0_9.0_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 9.3.0 - 9.4.0 | 2.48-3 | [2.48-3_9.3_OLD.firm](magnet:?xt=urn:btih:29aafb4ebf327fbfb3d5ea34183124de156920f8&dn=2.48-3_9.3_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.48-3_9.3_NEW.firm](magnet:?xt=urn:btih:778878e336c61f079d7b146c1afc08289a18357e&dn=2.48-3_9.3_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 9.5.0 | 2.49-0 | [2.49-0_9.5_OLD.firm](magnet:?xt=urn:btih:b75b9e438ee0d56108d63016b92f67e932103cfb&dn=2.49-0_9.5_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.49-0_9.5_NEW.firm](magnet:?xt=urn:btih:626d4be82d7cd1a0684ae56f54740dbe5061bc58&dn=2.49-0_9.5_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 9.6.0 - 9.9.0 | 2.50-1 | [2.50-1_9.6_OLD.firm](magnet:?xt=urn:btih:6bfd08ed3aa62aeb05666defa0c639399f6cf523&dn=2.50-1_9.6_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.50-1_9.6_NEW.firm](magnet:?xt=urn:btih:d6c28dbe1217a711f2214821804668ce7e131295&dn=2.50-1_9.6_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 10.0.0 | 2.50-7 | [2.50-7_10.0_OLD.firm](magnet:?xt=urn:btih:63b5ab8f0ee881c71c059ab1ee9c1e0c10a5ff2c&dn=2.50-7_10.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.50-7_10.0_NEW.firm](magnet:?xt=urn:btih:a603569254ebd6e6ae4de447458144bda97281c2&dn=2.50-7_10.0_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 10.2.0 - 10.3.0 | 2.50-9 | [2.50-9_10.2_OLD.firm](magnet:?xt=urn:btih:611c7a468a61b5b085cd81f82559e284f6c477ce&dn=2.50-9_10.2_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.50-9_10.2_NEW.firm](magnet:?xt=urn:btih:537fac39870d796ac163d962b4f145da101f6ab9&dn=2.50-9_10.2_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 10.4.0 - 10.7.0 | 2.50-11 | [2.50-11_10.4_OLD.firm](magnet:?xt=urn:btih:deb1b8aed5820d1ce202c54782f856bb382e0e45&dn=2.50-11_10.4_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.50-11_10.4_NEW.firm](magnet:?xt=urn:btih:8f6522179498e3e23c811155c247c1bf58c5c430&dn=2.50-11_10.4_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 11.0.0 | 2.51-0 | [2.51-0_11.0_OLD.firm](magnet:?xt=urn:btih:10ce0c501e9c7ef03c698c0610e5325a6f076215&dn=2.51-0_11.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.51-0_11.0_NEW.firm](magnet:?xt=urn:btih:4ecf0ed64f3ef94914542e7ad1aba336aae771c4&dn=2.51-0_11.0_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 11.1.0 | 2.51-2 | [2.51-2_11.1_OLD.firm](magnet:?xt=urn:btih:1d858fbffdb9fac8adbebd9c640b287284098601&dn=2.51-2_11.1_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.51-2_11.1_NEW.firm](magnet:?xt=urn:btih:307993b2b7b78502827458d6c6e78b75bea6eb41&dn=2.51-2_11.1_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 11.2.0 | 2.52-0 | [2.52-0_11.2_OLD.firm](magnet:?xt=urn:btih:6de2e257f73f11151ebfb4bf1345be64e47aed52&dn=2.52-0_11.2_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.52-0_11.2_NEW.firm](magnet:?xt=urn:btih:337e4618d30f9a84dd172b8e91f87451653c23b6&dn=2.52-0_11.2_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 11.3.0 | 2.53-0 | [2.53-0_11.3_OLD.firm](magnet:?xt=urn:btih:9d8d62c50b0ef1ad35b5e62602f21fac773171ce&dn=2.53-0_11.3_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.53-0_11.3_NEW.firm](magnet:?xt=urn:btih:53363ab66f877d9edf33f55e6abc3ccf72819191&dn=2.53-0_11.3_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 11.4.0 - 11.7.0 | 2.54-0 | [2.54-0_11.4_OLD.firm](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.54-0_11.4_NEW.firm](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| 11.8.0 - 11.11.0 | 2.55-0 | [2.55-0_11.8_OLD.firm](magnet:?xt=urn:btih:ee882a07afcf3f6acc676f8dc0ab25f291b643e0&dn=2.55-0%5F11.8%5FOLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) | [2.55-0_11.8_NEW.firm](magnet:?xt=urn:btih:97dc6ba91ed243596adb744cc20daa610c10fcab&dn=2.55-0%5F11.8%5FNEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) | + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy the hardmod-b9s-installer folder from the hardmod-b9s-installer `.zip` to your computer +1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer +1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm` +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer +1. Reinsert your SD card into your device +1. Use your hardmod to create a NAND backup +1. Move your NAND backup to the hardmod-b9s-installer folder on your computer and rename it to `NAND.bin` + +#### Section II - Installing boot9strap + +1. Run hardmod-b9s-installer + + Windows Users: Run `install-b9s.exe` + + Mac and Linux Users: Run `install-b9s.py` +1. Flash your outputted `NAND-patched.bin` to your device with your hardmod +1. Power off your device +1. Disconnect your hardmod +1. Power on your device + +#### Section III - Configuring Luma3DS + +1. Your device should have booted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/installing-boot9strap-(mset).txt b/_pages/et_EE/installing-boot9strap-(mset).txt new file mode 100644 index 0000000000..80bd50187e --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(mset).txt @@ -0,0 +1,60 @@ +--- +title: "Installing boot9strap (MSET)" +--- + +{% include toc title="Table of Contents" %} + +### What You Need + +* Any DS flashcart that works on your device version +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.dat` from the SafeB9SInstaller `.zip` to the root of your SD card + + ![]({{ "/images/screenshots/boot9strap-mset-file-layout.png" | absolute_url }}) + {: .notice--info} + +1. Reinsert your SD card into your device +1. Copy `SafeB9SInstaller.nds` from the SafeB9SInstaller `.zip` to your DS flashcart +1. Power on your device + +#### Section II - Launching SafeB9SInstaller + +1. Start your DS flashcart from your device +1. Boot `SafeB9SInstaller.nds` using your flashcart +1. Select the correct option for your system version + + 4.X.X -> "4.x SafeB9SInstaller" + + 6.X.X -> "6.x SafeB9SInstaller" +1. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/installing-boot9strap-(ntrboot).txt b/_pages/et_EE/installing-boot9strap-(ntrboot).txt new file mode 100644 index 0000000000..cde9885cfe --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(ntrboot).txt @@ -0,0 +1,141 @@ +--- +title: "Installing boot9strap (ntrboot)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). + +### What You Need + +* A magnet that triggers the sleep mode of your device (if using a folding style device) +* Your ntrboot flashed flashcart +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your device's SD card into your computer + + This is the SD card from your 3DS, *not* the SD card from your flashcart +1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card + + ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) + {: .notice--info} + +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - ntrboot + +1. Use the magnet to find the spot on your device where the sleep sensor is triggered + + This step is not needed on the old 2DS (which has a sleep mode switch) +1. Power off your device +1. Insert your flashcart into your device +1. Place the magnet on your device to trigger the sleep sensor + + On old 2DS, you should instead enable the sleep mode switch +1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons + + It may take a few attempts to get this to work because the positioning is awkward +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. Remove the magnet from your device + + On old 2DS, you should instead disable the sleep mode switch +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, force your device to power off by holding down the power button + + Your device will only boot to the SafeB9SInstaller screen until the next section is completed + +#### Section IV - Configuring Luma3DS + +1. Insert your SD card into your computer +1. Delete `boot.firm` from the root of your SD card +1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device +1. Your device should have booted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + +___ + +The following is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions). + +Note that the Acekard 2i retains its ability to launch `.nds` files while having the ntrboot exploit installed. This only applies when the Acekard 2i is in an NDS or custom firmware 3DS! While the ntrboot exploit is installed to the Acekard 2i, it will be unable to launch `.nds` files on DSi or stock 3DS systems. + +Do not follow this section until you have completed the rest of the instructions on this page. + +#### Section V - Removing ntrboot + +##### What You Need + +* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) +* The flashrom backup corresponding to your flashcart + + Note that if you followed [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)), the flashrom backup already exists in the correct location and does not need to be downloaded + + Note that if you followed [Flashing ntrboot (3DS Single System)](flashing-ntrboot-(3ds-single-system)) or [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)), the flashrom backup already exists on your flashcart's SD card and should be copied to the location specified below + + If you do not know which HW revision you have, just try each for your cart of them. Only the correct one will allow your flashcart to launch properly from home menu, but flashing the wrong one will not brick the cart + +| Flashcart | Hardware Revision | Flashrom | +|-|:-:|:-:| +| **Ace3DS X** | | *N/A* | +| **Acekard 2i** | HW 81 | - [Acekard_2i_(HW_81)-Flashrom.zip](magnet:?xt=urn:btih:71ce385a1d65e28719c419fe58d171a4873501ff&dn=Acekard%5F2i%5F%28HW%5F81%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **Acekard 2i** | HW 44 | - [Acekard_2i_(HW_44)-Flashrom.zip](magnet:?xt=urn:btih:d04bd19e15bf8600ccef6540bdbd043846888132&dn=Acekard%5F2i%5F%28HW%5F44%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **DSTT** | | *Missing* | +| **Infinity 3 R4i** | HW A5 | - [R4i_Gold_3DS_(HW_A5)-Flashrom.zip](magnet:?xt=urn:btih:c6dee8cc9535d58284ccb8430c9af4682c3e1efc&dn=R4i%5FGold%5F3DS%5F%28HW%5FA5%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4 3D Revolution** | HW A6 | - [R4i_Gold_3DS_(HW_A6)-Flashrom.zip](magnet:?xt=urn:btih:e1675722834b870ea64ddf1ef9ca77d78db2be00&dn=R4i%5FGold%5F3DS%5F%28HW%5FA6%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS Deluxe "Starter"** | | *Missing* | +| **R4i Gold 3DS** | HW 4 | - [R4i_Gold_3DS_(HW_4)-Flashrom.zip](magnet:?xt=urn:btih:a742778ade94b4a0b877cc481ba0f1a4120262da&dn=R4i%5FGold%5F3DS%5F%28HW%5F4%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS** | HW 5 | *Missing* | +| **R4i Gold 3DS** | HW 6 | *Missing* | +| **R4i Gold 3DS** | HW 7 | *Missing* | +| **R4i Gold 3DS** | HW 8 | *Missing* | +| **R4i Gold 3DS** | HW D | - [R4i_Gold_3DS_(HW_D)-Flashrom.zip](magnet:?xt=urn:btih:0a074dd475a26166d90ae26e313dcbc6d51cfa12&dn=R4i_Gold_3DS_%28HW_D%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS Plus** | | *N/A* | +| **R4i Gold 3DS RTS** | HW A5 | - [R4i_Gold_3DS_(HW_A5)-Flashrom.zip](magnet:?xt=urn:btih:c6dee8cc9535d58284ccb8430c9af4682c3e1efc&dn=R4i%5FGold%5F3DS%5F%28HW%5FA5%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS RTS** | HW A6 | - [R4i_Gold_3DS_(HW_A6)-Flashrom.zip](magnet:?xt=urn:btih:e1675722834b870ea64ddf1ef9ca77d78db2be00&dn=R4i%5FGold%5F3DS%5F%28HW%5FA6%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS RTS** | HW A7 | - [R4i_Gold_3DS_(HW_A7)-Flashrom.zip](magnet:?xt=urn:btih:d780a1fbcb83d0d3c99748c87534f77957da98ce&dn=R4i%5FGold%5F3DS%5F%28HW%5FA7%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Ultra** | | - [R4i_Ultra-Flashrom.zip](magnet:?xt=urn:btih:e2a080eb70b92d3127ffea2a5be6bbdb1928a438&dn=R4i%5FUltra-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i-SDHC 3DS RTS** | | - [R4i-SDHC_3DS_RTS-Flashrom.zip](magnet:?xt=urn:btih:11a4a3b6dd1cef5652b49a413d8e8c662449d819&dn=R4i-SDHC%5F3DS%5FRTS-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i-SDHC B9S** | | - [R4i-SDHC_3DS_RTS-Flashrom.zip](magnet:?xt=urn:btih:11a4a3b6dd1cef5652b49a413d8e8c662449d819&dn=R4i-SDHC%5F3DS%5FRTS-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4iSDHC GOLD Pro 20XX**** | | - [R4iSDHC_GOLD_Pro_20XX-Flashrom.zip](magnet:?xt=urn:btih:f41aeb6b88a986bb0c5246c53132f3b82052f58b&dn=R4iSDHC%5FGOLD%5FPro%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4iSDHC RTS LITE 20XX** | | - [R4iSDHC_RTS_LITE_20XX-Flashrom.zip](magnet:?xt=urn:btih:543f90f7c50ee847af1d2152bdcbe76e7ed364e4&dn=R4iSDHC%5FRTS%5FLITE%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4iSDHC Dual-Core 20XX** | | - [R4iSDHC_Dual-Core_20XX-Flashrom.zip](magnet:?xt=urn:btih:be5b27b85dcb8a696191a1eddef478f7ab346e06&dn=R4iSDHC%5FDual-Core%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | + +##### Instructions + +1. Power off your device +1. Insert your SD card into your computer + + This is the SD card from your 3DS, *not* the SD card from your flashcart +1. Create a folder named `ntrboot` on the root of your SD card +1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card +1. Create a folder named `payloads` in the `luma` folder on your SD card +1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card +1. Reinsert your SD card into your device +1. Insert your ntrboot compatible DS / DSi flashcart into your device +1. Launch ntrboot_flasher by holding (Start) during boot +1. Read the red screen warning +1. Press (A) to continue +1. Select your flashcart + + If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option +1. Select "Restore Flash" +1. Press (A) to proceed +1. Wait until the process is completed +1. Press (A) to return to the main menu +1. Press (B) to power off your device diff --git a/_pages/et_EE/installing-boot9strap-(safeb9sinstaller).txt b/_pages/et_EE/installing-boot9strap-(safeb9sinstaller).txt new file mode 100644 index 0000000000..099585ee5a --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(safeb9sinstaller).txt @@ -0,0 +1,39 @@ +--- +title: "Installing boot9strap (SafeB9SInstaller)" +--- + +{% include toc title="Table of Contents" %} + +### Instructions + +#### Section I - Launching SafeB9SInstaller + +1. Launch udsploit from the list of homebrew +1. Once it has completed, press (Start) to exit udsploit + + This may take several tries + + If it freezes, just force the console to power off by holding the power button, then try again +1. Launch safehax from the list of homebrew + + If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on + + If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19) + + If it freezes, just force the console to power off by holding the power button, then try again +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section II - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section III - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/et_EE/installing-boot9strap-(soundhax).txt b/_pages/et_EE/installing-boot9strap-(soundhax).txt new file mode 100644 index 0000000000..1ca04197d7 --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(soundhax).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (Soundhax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. + +{% capture notice-1 %} + +Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. + +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! +{% endcapture %} + +
{{ notice-1 | markdownify }}
+ +### What You Need + +* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy the Soundhax `.m4a` to the root of your SD card +1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` +1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Copy `boot.3dsx` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - Launching SafeB9SInstaller + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch Nintendo 3DS Sound + + ![]({{ "/images/screenshots/soundhax-welcome.png" | absolute_url }}) + {: .notice--info} + +1. If you've never opened Nintendo 3DS Sound before and get tips on how to use it from a bird icon, go through all of the bird tips, then close the app normally and relaunch it + + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done +1. Go to `/SDCARD`, then play "<3 nedwill 2016" + + This may take many tries + + If it freezes, just force the console to power off by holding the power button, then try again + + ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) + {: .notice--info} + +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/installing-boot9strap-(usm).txt b/_pages/et_EE/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/et_EE/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/et_EE/legacy-methods.txt b/_pages/et_EE/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/et_EE/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/et_EE/move-emunand.txt b/_pages/et_EE/move-emunand.txt new file mode 100644 index 0000000000..70d4477623 --- /dev/null +++ b/_pages/et_EE/move-emunand.txt @@ -0,0 +1,176 @@ +--- +title: "Move EmuNAND" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). + +Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. + +You MUST have already installed Luma3DS and boot9strap to use this. +{: .notice--danger} + +### What You Need + +* An existing EmuNAND +* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card +1. Reinsert your SD card into your device + +#### Section II - Backup SysNAND DSiWare Saves + +If you do not have any DSiWare games or saves that you care about, skip this section. +{: .notice--info} + +1. Launch GodMode9 by holding (Start) during boot +1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed +1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Navigate to `[2:] SYSNAND TWLN` -> `title` +1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9/out" + + This process may take some time if you have many DSiWare games +1. Press (B) twice to return to the main menu + +#### Section III - Backup GBA VC Saves + +If you do not have any GBA VC games or saves that you care about, skip this section. +{: .notice--info} + +Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc) +{: .notice--info} + +The game will be outputted to the `/gm9/out/` folder on your SD card with the name `.gbavc.sav`. +{: .notice--info} + +To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by hovering over `[A:] SYSNAND SD`, holding (R) and pressing (A) at the same time, then selecting "Search for titles". +{: .notice--info} + +1. Do the following process for each GBA VC game that you want to backup the save for: + + Launch the GBA VC game + + Exit the GBA VC game + + Boot your device while holding (Start) to launch the Luma3DS chainloader menu + + Launch GodMode9 by pressing (A) + + Navigate to `[S:] SYSNAND VIRTUAL` + + Press (A) on `agbsave.bin` to select it + + Select "AGBSAVE options..." + + Select "Dump GBA VC save" + + Press (A) to continue + + Press (Start) to reboot your device + +#### Section IV - Copy EmuNAND to SysNAND + +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[E:] EMUNAND VIRTUAL` +1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)" +1. Press (A) to unlock SysNAND overwriting, then input the key combo given + + This will not overwrite your boot9strap installation +1. Input the key combo given to unlock SysNAND (lvl1) writing + + This process will take some time +1. Once it has completed, press (A) to continue +1. Press (B) to decline relocking write permissions if prompted +1. Press (B) to return to the main menu + +#### Section V - Restore DSiWare Saves + +If you did not backup DSiWare Saves earlier, skip this section. +{: .notice--info} + +1. Navigate to `[0:] SDCARD` -> `gm9` -> `out` +1. Press (Y) on the `00030004` folder to copy it +1. Press (B) twice to return to the main menu +1. Navigate to `[2:] SYSNAND TWLN` -> `title` +1. Press (Y) to paste the `00030004` folder +1. Select "Copy path(s)" +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. Select "Overwrite file(s)" + + This process may take some time if you have many DSiWare games +1. Press (B) to decline relocking write permissions if prompted +1. Press (B) twice to return to the main menu + +#### Section VI - Restore GBA VC Saves + +If you did not backup GBA VC Saves earlier, skip this section. +{: .notice--info} + +To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by holding (R) and pressing (A) on the GodeMode9 main menu, then selecting "Search for titles". +{: .notice--info} + +1. Hold (R) and press (Start) at the same time to power off your device +1. Power on your device into SysNAND +1. Do the following process for each GBA VC game that you want to restore the save for: + + Launch the GBA VC game + + Exit the GBA VC game + + Boot your device while holding (Start) to launch the Luma3DS chainloader menu + + Launch GodMode9 by pressing (A) + + Navigate to `[0:] SDCARD` -> `gm9` + + Press (Y) on the `.gbavc.sav` file you wish to restore to copy it + + Press (B) to return to the main menu + + Navigate to `[S:] SYSNAND VIRTUAL` + + Press (A) on `agbsave.bin` to select it + + Select "AGBSAVE options..." + + Select "Inject GBA VC save" + + Press (A) to continue + + Press (Start) to reboot your device + + Launch the GBA VC game + + Exit the GBA VC game +1. Launch GodMode9 by holding (Start) during boot + +#### Section VII - Backup SysNAND + +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. **Backup every file on your SD card to a folder on your computer; all files will be deleted in the following steps** + +#### Section VIII - Format SD card + +1. Reinsert your SD card into your device +1. Press (Home) to bring up the action menu +1. Select "More..." +1. Select "SD format menu" +1. Press (A) to confirm +1. Select "No EmuNAND" +1. Select "Auto" +1. Press (A) to accept the label `GM9SD` + + Optionally, you may input a custom name for the SD card +1. When prompted, input the key combo given to confirm +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy all your files back to your SD card + + Ensure you replace the `boot.firm` file on your SD card with the one from your backup +1. Reinsert your SD card into your device +1. Press (A) to remount your SD card +1. Press (Start) to reboot +1. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) + +___ + +### Return to [Finalizing Setup](finalizing-setup). +{: .notice--primary} diff --git a/_pages/et_EE/ntrboot.txt b/_pages/et_EE/ntrboot.txt new file mode 100644 index 0000000000..76f128345f --- /dev/null +++ b/_pages/et_EE/ntrboot.txt @@ -0,0 +1,92 @@ +--- +title: "ntrboot" +--- + +{% include toc title="Table of Contents" %} + +If your flashcart comes pre-flashed with ntrboot (or you have already flashed ntrboot to your flashcart), you can skip to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it. +{: .notice--success} + +### Required Reading + +Installing boot9strap with ntrboot requires a compatible NDS / DSi flashcart to flash ntrboot to. Note that some of these flashcarts are sold pre-flashed with ntrboot. + +While the ntrboot exploit works independently of system version, the ntrboot flasher (which installs the exploit to the cart) is not. This means that, depending on the versions and devices supported by your flashcart, only certain methods may be available to you. + +Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files when they detect that the system clock has passed a date determined by the flashcart firmware. One method to bypass this is to set the system clock to an earlier date. + +| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | +|-|-:|:-:|:-:|:-:|-| +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | +| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **R4 3D Revolution** | | No | None | None | | +| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | +| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | + + ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) + {: .notice--info} + +Ensure your flashcart is able to launch `.nds` files on your device before beginning. Some flashcarts may require firmware or "kernel" files to be copied to the flashcart SD card. Consult your specific flashcart's instructions for more information. + +Note that specific methods may have additional compatibility information. + +The usage of this exploit, regardless of flashing method, requires access to a small magnet if the target device is of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons. + +To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot. +{: .notice--info} + +Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on NDS and custom firmware 3DS systems only*). This means that, for most flashcarts, it will not even display on the home menu. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done. + +Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) +{: .notice--danger} + +___ +### Methods + +___ + +#### Flashing ntrboot (3DS Single System) + +This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table above for more information. + +Continue to [Flashing ntrboot (3DS Single System)](flashing-ntrboot-(3ds-single-system)) +{: .notice--primary} + +___ + +#### Flashing ntrboot (3DS Multi System) + +This method requires temporary access to a second 3DS family device that is already running boot9strap. This does not require your flashcart to support either 3DS's version. + +Continue to [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) +{: .notice--primary} + +___ + +#### Flashing ntrboot (NDS) + +This method requires temporary access to a Nintendo DS or Nintendo DS Lite that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your NDS. + +Continue to [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) +{: .notice--primary} + +___ + +#### Flashing ntrboot (DSi) + +This method requires temporary access to a Nintendo DSi that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your DSi. This means that your flashcart must support launching `.nds` files on your DSi's version. See the flashcart table above for more information. + +Continue to [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) +{: .notice--primary} diff --git a/_pages/et_EE/privacy-policy.txt b/_pages/et_EE/privacy-policy.txt new file mode 100644 index 0000000000..c36506539b --- /dev/null +++ b/_pages/et_EE/privacy-policy.txt @@ -0,0 +1,30 @@ +--- +title: "Privacy Policy" # +layout: single-no-ads +--- + +### Cookies + +This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily. + +### Embedded Content From Other Websites + +This site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves as if the user has visited the other website. + +These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website. + +### Analytics + +This site uses Google Analytics to monitor and analyze traffic. This site is hosted by Github Pages, which may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with this site. For more information about Github Pages as it relates to user privacy, see the [GitHub Privacy Statement](https://help.github.com/en/articles/github-privacy-statement). + +### Information Collected + +This site does not collect personal information. This site may collect usage information in order to analyze interest in content and to provide advertisers with information on an aggregate basis. No personally identifiable information is shared with third-party advertising companies. + +### Third-Party Websites + +This site may link to other sites for users to use or reference. This site is not responsible for the privacy policies of other sites. Users should be aware that the privacy policies of other websites may differ from this one. + +### Changes to Privacy Policy + +The contents of this Privacy Policy may be altered at any time and for any reason. diff --git a/_pages/et_EE/region-changing.txt b/_pages/et_EE/region-changing.txt new file mode 100644 index 0000000000..86cff75300 --- /dev/null +++ b/_pages/et_EE/region-changing.txt @@ -0,0 +1,141 @@ +--- +title: "Region Changing" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is add-on section for region changing your CFW SysNAND. This is done by installing the 11.5.0 CTRTransfer image for the region you want to switch to. + +Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). + +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). + +Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. + +This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). +{: .notice--warning} + +After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +{: .notice--warning} + +Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. + +Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but Old 3DS users, for now, will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices. + +You MUST have already installed Luma3DS and boot9strap to use this. +{: .notice--danger} + +### What You Need + +* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)* +* The 11.5.0 CTRTransfer image for your device and the region that you want to change to: + + - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) +~ + + - [Old 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Create a folder named `cias` on the root of your SD card if it does not already exist +1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card**** +1. Copy the 11.5.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/gm9/` folder on your SD card +1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card +1. Reinsert your SD card into your device + +#### Section II - CTRTransfer + +1. Launch GodMode9 by holding (Start) during boot +1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed +1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Navigate to `[0:] SDCARD` -> `gm9` +1. Press (A) on the CTRTransfer `.bin` to select it +1. Select "CTRNAND options..." +1. Select "Transfer image to CTRNAND" +1. If prompted, select "Transfer to SysNAND" + + This prompt will only appear if you have an EmuNAND +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given + + This process will take some time +1. Once the transfer has completed, press (A) to continue +1. Press (B) to decline relocking write permissions if prompted +1. Press (B) twice to return to the main menu +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Scripts from Plailect's Guide" +1. Select "CTRTransfer Ticket Copy" +1. When prompted, press (A) to proceed +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Press (Start) to reboot your device +1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + + Updates while using B9S + Luma (what you have) are safe + + If this gives you an error, set your DNS settings to "auto" + +#### Section III - Launching FBI + +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Launch the Download Play application +1. Your device should load the Homebrew Launcher + +#### Section IV - Reinstalling Tickets + +If script found no user tickets told you to skip this section, then skip this section +{: .notice--info} + +1. Launch FBI from the list of homebrew +1. Navigate to `SD` -> `cias` +1. Return to the SD directory with (B) +1. Select "gm9" +1. Select "out" +1. Select "ctrtransfer_tickets" +1. Do the following process for either the `eshop` folder, `unknown` folder, or both + + Navigate to the folder + + Select "\" + + Select "Install and delete all tickets" + + Wait. The system may appear to freeze, just give it time. + + Press (A) to confirm + + Press (B) to decline installing tickets from CDN. +1. Press (Home) to exit FBI + +#### Section V - Region settings + +1. Launch the System Settings +1. Go to "Other Settings", "Profile", then "Region Settings" +1. Select a country from the region you switched to +1. If prompted, you do not need to set a state + +#### Section VI - Remove CTRTransfer image + +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[0:] SDCARD` -> `gm9` +1. Press (X) on the CTRTransfer image `.bin` to delete it +1. Press (A) to confirm +1. Press (Start) to reboot your device + +___ + +Old 3DSs and 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). +{: .notice--info} diff --git a/_pages/et_EE/seedminer.txt b/_pages/et_EE/seedminer.txt new file mode 100644 index 0000000000..0652a4ac90 --- /dev/null +++ b/_pages/et_EE/seedminer.txt @@ -0,0 +1,94 @@ +--- +title: "Seedminer" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. + +To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). + +If this key were completely random, the encryption key would be impossible to break on current computing hardware. Fortunately, the first half of the key (`movable_part1.sed`) is actually mathematically related to your device's Friend Code, allowing us to break the encryption. For information on how Seedminer works, please see [this presentation](https://zoogie.github.io/web/34⅕c3). + +This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method. + +### Instructions + +#### Section I - Compatibility Test + +While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. + +There are two different methods for building on the Seedminer exploit (described in more detail at the bottom of this page), so even if this test fails you can still use another method. + +#### DS Internet Settings Test (used for Fredtool) + +1. Go to System Settings, then "Internet Settings", then "Nintendo DS Connections" +1. Press "OK" +1. If your device loads into a "Nintendo Wi-Fi Connection Setup" menu, the test was successful + + If the screen stays black or appears to freeze, the test has failed and you will not be able to use the bannerbomb3 method which requires a functioning DS Internet Settings +1. Exit this menu + +#### Section II - Prep Work + +1. Insert your SD card into your computer +1. Navigate to the `Nintendo 3DS` folder on your SD card +1. Copy the 32 character long name of the folder you see inside Nintendo 3DS + + Do not go inside any more folders + + If you see multiple folders with long, random names inside `Nintendo 3DS` without opening any other folders, perform the following: + + Rename the `Nintendo 3DS` folder to `BACKUP_Nintendo 3DS` + + Reinsert your SD card into your device and power on your device + + Wait for the device to generate the SD card data + + Power off your device and reinsert your SD card into your computer + + Navigate to the `Nintendo 3DS` folder on your SD card + + Copy the 32 character long name of the folder you see + + Delete the `Nintendo 3DS` folder + + Rename the `BACKUP_Nintendo 3DS` folder to `Nintendo 3DS` +1. Paste your 32 character long folder name into a document you can reference later + + This folder name is also known as your "ID0" +1. Power on your device +1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) +1. Find your Mii profile, then find the "Friend Code" field on the top screen + +#### Section III - Seedminer + +1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) + + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you +1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field +1. Paste your device's 32 character long folder name into the "Your ID0" field + + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section +1. Complete the "I'm not a robot" captcha +1. Select "Go" + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. +1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console +1. Wait for the site to update + + If it does not, wait a few minutes before refreshing the page once +1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button +1. Wait for the remainder of the process to complete + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. + + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you +1. When the process has completed, download your `movable.sed` file from the site + + Keep this file as you will need it in the upcoming pages + +___ + +#### Seedminer + unSAFE_MODE + +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. + +This method is compatible with all regions, though CHN region is not covered by this guide. + +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) +{: .notice--primary} + +___ + +#### Legacy Methods + +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. + +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/et_EE/site-navigation.txt b/_pages/et_EE/site-navigation.txt new file mode 100644 index 0000000000..a878c9c847 --- /dev/null +++ b/_pages/et_EE/site-navigation.txt @@ -0,0 +1,62 @@ +--- +title: "Site Navigation" # +layout: single-no-ads +sitemap: false +--- + +{% capture notice-1 %} +**Popular** + ++ [Finalizing Setup](finalizing-setup) ++ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) +{% endcapture %} +
{{ notice-1 | markdownify }}
+ +{% capture notice-2 %} +**All** + ++ [A9LH to B9S](a9lh-to-b9s) ++ [BannerBomb3](bannerbomb3) ++ [Cartridge Update](cart-update) ++ [Credits](credits) ++ [CTRTransfer](ctrtransfer) ++ [DSiWare Dumper](dsidumper) ++ [Donations](donations) ++ [F3 (Linux)](f3-(linux)) ++ [F3X (Mac)](f3x-(mac)) ++ [FAQ](faq) ++ [File Extensions (Windows)](file-extensions-(windows)) ++ [Finalizing Setup](finalizing-setup) ++ [Flashing ntrboot (3DS Single System)](flashing-ntrboot-(3ds-single-system)) ++ [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) ++ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) ++ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Get Started](get-started) ++ [GodMode9 Usage](godmode9-usage) ++ [H2testw (Windows)](h2testw-(windows)) ++ [Home](/) ++ [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) ++ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) ++ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) ++ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) ++ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) ++ [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) ++ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) ++ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) ++ [Installing boot9strap (MSET)](installing-boot9strap-(mset)) ++ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Move EmuNAND](move-emunand) ++ [ntrboot](ntrboot) ++ [Region Changing](region-changing) ++ [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) ++ [Troubleshooting](troubleshooting) ++ [Uninstall CFW](uninstall-cfw) ++ [Updating B9S](updating-b9s) +{% endcapture %} +
{{ notice-2 | markdownify }}
diff --git a/_pages/et_EE/troubleshooting.txt b/_pages/et_EE/troubleshooting.txt new file mode 100644 index 0000000000..c559032d00 --- /dev/null +++ b/_pages/et_EE/troubleshooting.txt @@ -0,0 +1,157 @@ +--- +title: "Troubleshooting" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +If you are unable to boot your device, please look for the section relevant to you and follow the instructions. + +If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried. + +Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. + +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). + +## DSi / DS functionality is broken after completing the guide + +### What You Need + +* The latest release of [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) *(the .3dsx file)* + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Copy `TWLFix-CFW.3dsx` to the `/3ds/` folder on your SD card +1. Reinsert your SD card into your device + +#### Section II - Fixing TWL + +1. Open the Homebrew Launcher +1. Launch TWLFix-CFW from the list of homebrew +1. Press (A) to uninstall the broken TWL titles +1. Press (Start) to reboot the device +1. Perform a System Update by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + + The update will see that the essential TWL titles have been uninstalled, and will redownload and reinstall them +1. Once the update is complete, tap "OK" to reboot the device + +## Cannot inject H&S on Gateway downgraded device + +This is caused by Gateway implementing a very shoddy downgrade method which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one. + +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[1:] SYSNAND CTRNAND` -> `title` -> `00040010` +1. Navigate to the folder for your device and region: + + **Old 3DS or Old 2DS EUR**: `00022300` -> `content` + + **Old 3DS or Old 2DS JPN**: `00020300` -> `content` + + **Old 3DS or Old 2DS USA**: `00021300` -> `content` + + **New 3DS or New 2DS EUR**: `20022300` -> `content` + + **New 3DS or New 2DS JPN**: `20020300` -> `content` + + **New 3DS or New 2DS USA**: `20021300` -> `content` +1. Notice that there are two sets of app and tmd files, one set with uppercase extensions (`.TMD` and `.APP`), and one set with lowercase extensions (`.tmd` and `.app`) +1. While holding the (R) trigger, press (Y) to create a new directory +1. Press (A) to confirm the name `newdir` (it does not matter what the folder is called) +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. Press (B) to decline relocking write permissions if prompted +1. Press the (L) trigger on each of the uppercase extension files (`.TMD` and `.APP`) to mark them +1. Press (Y) to copy the files +1. Navigate to `newdir` +1. Press (Y) to paste the files +1. Select "Move path(s)" +1. The uppercase extension files will have been moved to the `newdir` directory +1. Press (Start) to reboot your device +1. Retry the H&S injection +1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection + +## A browser based exploit is not working + +Browser based exploits (such as browserhax or 2xrsa) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps. + +1. Launch the browser, then launch the browser settings +1. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data) +1. Try the exploit again + +## Black screen on SysNAND boot + +1. Try booting with your SD card out, and then reinserting it after booting + 1. Power off your device + 1. Remove your SD card from your device + 1. Power on your device + 1. When the home menu appears, reinsert your SD card into your device + 1. If this worked, you should clear Home Menu's extdata by following these instructions: + 1. Power off your device + 1. Launch GodMode9 by holding (Start) during boot + 1. Press (Home) to bring up the action menu + 1. Select "Scripts..." + 1. Select "GM9Megascript" + 1. Select "Scripts from Plailect's Guide" + 1. Select "Remove extdata" + 1. Press (A) to continue + 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given + 1. Press (A) to continue + 1. Press (B) to return to the main menu + 1. Select "Exit" + 1. Press (A) to relock write permissions if prompted + 1. Press (Start) to reboot your device +1. Try booting without any cartridges inserted (including flashcarts) +1. If you have a hardmod and a NAND backup, flash the backup back to SysNAND +1. Try booting into recovery mode and updating your system + 1. Power off your device + 1. Hold (L) + (R) + (A) + (Up) + 1. Power on your device + 1. If you enter safe mode, update your device +1. Your device may be bricked. For support (in English), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) + +## Clear Home Menu extdata + +1. Power off your device +1. Insert your SD card into your computer +1. Navigate to the `/Nintendo 3DS/<32-character-id>/<32-character-id>/extdata/00000000/` folder on your SD card +1. Delete the extdata file corresponding to your region: + + **EUR Region**: `00000098` + + **JPN Region**: `00000082` + + **USA Region**: `0000008f` + + **CHN Region**: `000000A1` + + **KOR Region**: `000000A9` + + **TWN Region**: `000000B1` +1. Reinsert your SD card into your device + +## Black screen on SysNAND boot after Installing boot9strap + +1. Ensure you have a working payload + 1. Check for the existence of `boot.firm` in the root of your SD card. +1. Try resetting Luma's config and fix options + 1. Delete `/luma/config.bin` from your SD card + 1. Set your options when it boots +1. Test booting GodMode9 + 1. On Luma3DS, hold (Start) on boot +1. Try deleting home menu's extdata by following these instructions: + 1. Power off your device + 1. Launch GodMode9 by holding (Start) during boot + 1. Press (Home) to bring up the action menu + 1. Select "Scripts..." + 1. Select "GM9Megascript" + 1. Select "Scripts from Plailect's Guide" + 1. Select "Remove extdata" + 1. Press (A) to continue + 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given + 1. Press (A) to continue + 1. Press (B) to return to the main menu + 1. Select "Exit" + 1. Press (A) to relock write permissions if prompted + 1. Press (Start) to reboot your device +1. Try booting without any cartridges inserted (including flashcarts) +1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version +1. Try following [CTRTransfer](ctrtransfer) +1. For support (in English), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) + +## Blue screen on boot (bootrom error) + +1. Your device is bricked +1. You will need to get an ntrboot-comptible flashcart (one of the ones on [this list](ntrboot) or a [hardmod](https://gbatemp.net/threads/414498/), or repair / replace your device +1. For support (in English), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) diff --git a/_pages/et_EE/uninstall-cfw.txt b/_pages/et_EE/uninstall-cfw.txt new file mode 100644 index 0000000000..30e878bc92 --- /dev/null +++ b/_pages/et_EE/uninstall-cfw.txt @@ -0,0 +1,88 @@ +--- +title: "Uninstall CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock. + +This is almost never the solution to fix any issues you encounter with your CFW installation. A better idea would be to read the [troubleshooting](troubleshooting) page or ask (in English) for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp). +{: .notice--danger} + +Any unsigned (illegitimate) games will be rendered unusable and should be manually removed before starting this process by using the Data Management section of the System Settings. Use a [save manager](https://github.com/FlagBrew/Checkpoint/releases/latest) to backup any saves for these unsigned (illegitimate) games you care about. + +This will not affect your NNID, any legitimately purchased games, or any saves for those legitimately purchased games. + +If you have modified critical system software (such as editing the home menu, unbanning your console, etc), uninstalling CFW may BRICK your device! +{: .notice--danger} + +Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. + +### What You Need + +* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) + +### Instructions + +#### Section I - Safety Test + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Launch GodMode9 by holding (Start) during boot +1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed +1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Navigate to `[1:] SYSNAND CTRNAND > title > 00040138 > (X)0000002 > content` + + On a "New" edition console, the (X) will instead be 2 + + On an "Old" edition console, the (X) will instead be 0 +1. Select the `.app` file +1. Select `NCCH Image Options` +1. Select `Mount image to drive` +1. In the window that appears, open the `exefs` folder +1. In this folder, select the `.firm` file +1. Select "Firm Image Options" +1. Select "Boot Firm" +1. When prompted, choose to decrypt and make a copy +1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section + + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + +#### Section II - Prep Work + +1. Power on your device +1. Navigate to System Settings > Data Management > Nintendo 3DS > Software +1. In this list of software, delete any non-Nintendo content you installed while using CFW + + This includes common system software such as FBI, Anemone3DS, Luma Updater, Homebrew Launcher, Checkpoint, and others, along with any non-eShop games +1. Navigate to Data Management > DSiWare +1. In this list of software, delete any non-Nintendo content you installed while using CFW + + This includes software such as TWiLightMenu++, along with any non-eShop games + + Failure to remove all CFW software from both the 3DS and DSiWare sections before uninstalling CFW may prevent or disable access to the Data Management menu after uninstalling CFW +1. Power off your device + +#### Section III - Running Uninstall Script + +1. Launch GodMode9 by holding (Start) during boot +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Hax Options" +1. Select "Un-install Hax" +1. When prompted, press (A) to proceed +1. Press (A) to unlock SysNAND (lvl3) writing, then input the key combo given +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Press (Start) to reboot your device + +___ + +All custom firmware has been removed from your device. +{: .notice--success} + +You can now remove any extra files and folders from the root of your SD card that are *not* the `Nintendo 3DS` or `DCIM` folders. +{: .notice--info} diff --git a/_pages/et_EE/updating-b9s.txt b/_pages/et_EE/updating-b9s.txt new file mode 100644 index 0000000000..84d8eb17f1 --- /dev/null +++ b/_pages/et_EE/updating-b9s.txt @@ -0,0 +1,77 @@ +--- +title: "Updating B9S" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page is for existing boot9strap users to update their installation of boot9strap to the latest version. + +{% capture notice-1 %} +There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: + +1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" +1. Disable the "Sending of System Information" option +1. Exit the System Settings +1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) + + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) +1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" +1. Disable the "Show friends what you're playing" option +1. Exit your Friend List + +{% endcapture %} + +
{{ notice-1 | markdownify }}
+ +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) + +### Instructions + +#### Section I - Prep Work + +For all steps in this section, overwrite any existing files on your SD card. +{: .notice--info} + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card +1. Reinsert your SD card into your device + +#### Section II - Installing boot9strap + +1. Launch Luma3DS chainloader menu by holding (Start) during boot +1. Launch SafeB9SInstaller by pressing (A) +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, hold (Start) while pressing (A) to reboot your device to the Luma3DS chainloader + + If you encounter an `argc = 0` error booting your device after the B9S update, just continue to fix it + +#### Section III - Update Luma3DS + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Reinsert your SD card into your device +1. Power on your device + +#### Section IV - Configuring Luma3DS + +This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot. +{: .notice--info} + +1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/fi_FI/credits.txt b/_pages/fi_FI/credits.txt index 413171110d..67c57226b0 100644 --- a/_pages/fi_FI/credits.txt +++ b/_pages/fi_FI/credits.txt @@ -1,14 +1,14 @@ --- -title: "תודות" +title: "Kiitokset" --- -**תודות מיוחדות לכל [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) על היותכם מדהימים!** +**Erityiskiitokset kaikille [#Cakey-kanavalla Freenodessa](http://webchat.freenode.net/?channels=%23Cakey)!** {: .notice--primary} -**תודה מיוחדת לכל [המתרגמים] (https://crowdin.com/project/3ds-guide) על זה שהם אדירים!** +**Erityiskiitokset kaikille [kääntäjille](https://crowdin.com/project/3ds-guide)!** {: .notice--primary} -אם שכחתי אתכם כאן, צור איתי קשר ואוסיף את שמכם. +Otathan yhteyttä minuun, jos unohdin sinut tästä, niin lisään nimesi. {% capture notice-1 %} diff --git a/_pages/fi_FI/finalizing-setup.txt b/_pages/fi_FI/finalizing-setup.txt index ca64bbc452..e79da5480c 100644 --- a/_pages/fi_FI/finalizing-setup.txt +++ b/_pages/fi_FI/finalizing-setup.txt @@ -72,7 +72,7 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Paina (L)-, (ALAS)- ja (SELECT)-painikkeita samaan aikaan avataksesi Rosalina-valikon +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Valitse "Miscellaneous options" 1. Valitse "Switch the hb. title to the current app." 1. Paina (B):tä jatkaaksesi diff --git a/_pages/fi_FI/flashing-ntrboot-(dsi).txt b/_pages/fi_FI/flashing-ntrboot-(dsi).txt index 71ee6b32e2..7ab7c4b628 100644 --- a/_pages/fi_FI/flashing-ntrboot-(dsi).txt +++ b/_pages/fi_FI/flashing-ntrboot-(dsi).txt @@ -1,48 +1,48 @@ --- -title: "Ntrbootin asentaminen (DSi)" +title: "ntrboot flashelése (DSi)" --- -{% include toc title="Sisällysluettelo" %} +{% include toc title="Tartalomjegyzék" %} -### Tärkeää tietoa +### Fontos tudnivalók -Varmista ennen jatkamista, että olet lukenut kaikki [ntrbootia koskevat huomautukset](ntrboot). +Mielőtt elkezdenénk, bizonyosodj meg róla, hogy mindent elolvastál az [ntrboot](ntrboot)-tal kapcsolatban -Tämä menetelmä vaatii tilapäiseen käyttöön flash-korttisi kanssa yhteensopivan Nintendo DSi -konsolin. Tämä menetelmä käyttää flash-korttia ntrboot-asennusohjelman (`.nds`-tiedoston) avaamiseen DSi:lläsi. This means that your flashcart must support launching `.nds` files on your DSi's version. Tutustu [Ntrboot](ntrboot)-sivun flash-korttitaulukkoon lisätietoja varten. +Ehhez a módszerhez szükséged lesz átmenetileg egy Nintendo DSi készülékre, ami kompatibilis a flashkártyáddal. Ez a módszer a flashkártyát használja, hogy futtassa az ntrboot flashelő `.nds` fájlt a DSi-den. Ez azt jelenti, hogy a flashkártyádnak támogatnia kell `.nds` fájlok futtatását azon a verzión, amin a DSi-d áll. További információkért lásd a táblázatot az [ntrboot](ntrboot) oldalon. -Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **vioittaa** jäljitelmä-flash-korttia ja tehdä siitä pysyvästi käyttökelvottoman. Vaikka tämä onkin epätodennäköistä, on suositeltavaa käyttää vain alkuperäisiä kortteja. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési folyamat során **brickelődjön** néhány hamisított flashkártya és végleg használhatatlanná váljon. Ez elég valószínűtlen, azonban éppen emiatt csak eredeti flashkártyákat támogatunk. Ajánlott jó hírű oldalakon vásárolni (mint például az [NDS Card](http://www.nds-card.net/)), hogy elkerüld a hamisított flashkártyákat {: .notice--danger} -### Tarpeet +### Amire szükséged lesz -* Ntrboot-yhteensopiva flash-korttisi -* Kaksi konsolia - + **Lähde-DSi**: flash-korttisi kanssa yhteensopiva Nintendo DSi - + **Kohde-3DS**: 3DS-perheen konsoli, jolla on vakiolaiteohjelmisto -* The latest release of [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) *(`dsi` flasher; not the standard flasher)* +* Olyan flashkártya, ami támogatja az ntrboot-ot +* Két készülék + + **A forrás DSi**: egy Nintendo DSi, ami támogatja a flashkártyádat + + **A cél 3DS**: egy eszköz a 3DS családból, ami gyári állapotban van +* A [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) legújabb verziója *(a `dsi` flasher; nem a sima flasher)* -### Ohjeet +### Utasítások -#### Vaihe I – Valmistelut +#### Első rész - Előkészületek -1. Sammuta **lähde-DSi** -1. Aseta flash-korttisi SD-kortti tietokoneeseesi -1. Kopioi `ds_ntrboot_flasher_dsi.nds` flash-korttisi SD-kortille -1. Aseta SD-kortti takaisin flash-korttiisi -1. Aseta ntrboot-yhteensopiva DS-/DSi-flash-korttisi **lähde-DSi**:hin +1. Kapcsold ki a **forrás DSi**-t +1. Helyezd a flashkártyád SD kártyáját a számítógépbe +1. Másold a `ds_ntrboot_flasher_dsi.nds` fájlt a flashkártyád SD kártyájára +1. Helyezd vissza a flashkártyád SD kártyáját a flashkártyádba +1. Helyezd be az ntrboot kompatibilis DS / DSi flashkártyádat a **forrás DSi**-be -#### Vaihe II – Ntrbootin asentaminen +#### Második rész - ntrboot flashelése -1. Avaa `ds_ntrboot_flasher_dsi.nds` flash-korttisi avulla **lähde-DSi**-konsolilla -1. Paina (A):ta jatkaaksesi -1. Käytä ristiohjainta valitaksesi flash-korttisi -1. Paina (A):ta jatkaaksesi -1. Paina (A):ta suorittaaksesi toiminnon "inject ntrboothax" -1. Paina (A):ta valitaksesi vaihtoehdon "RETAIL" -1. Paina (A):ta jatkaaksesi -1. Valitse "EXIT" +1. Indítsd el a `ds_ntrboot_flasher_dsi.nds` fájlt **a forrás DSi-n** a flashkártyád segítségével +1. Nyomd meg az (A) gombot a folytatáshoz +1. Használd a (Fel) és (Le) gombokat a flashkártyád kiválasztásához +1. Nyomd meg az (A) gombot a folytatáshoz +1. Nyomd meg az (A) gombot, hogy elvégezd az "inject ntrboothax" folyamatot +1. Nyomd meg az (A) gombot, hogy kiválaszd a "RETAIL" opciót +1. Nyomd meg az (A) gombot a folytatáshoz +1. Válaszd az "EXIT" opciót ___ -### Jatka osioon [Boot9strapin asentaminen (ntrboot)](installing-boot9strap-(ntrboot)) +### Továbblépés a [boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) {: .notice--primary} diff --git a/_pages/fi_FI/installing-boot9strap-(usm).txt b/_pages/fi_FI/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..8670277f99 --- /dev/null +++ b/_pages/fi_FI/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### Tarpeet + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Vaihe I – Valmistelut + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Aseta SD-korttisi tietokoneeseesi +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Aseta SD-korttisi takaisin konsoliisi +1. Käynnistä konsolisi +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Sammuta konsolisi + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Vaihe IV – Luma3DS:n määrittäminen + +1. Your device should automatically show the Luma Configuration menu +1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön: + + **"Show NAND or user string in System Settings"** +1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Aseta SD-korttisi tietokoneeseesi +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Jatka osioon [Asennuksen viimeistely](finalizing-setup) +{: .notice--primary} diff --git a/_pages/fi_FI/legacy-methods.txt b/_pages/fi_FI/legacy-methods.txt new file mode 100644 index 0000000000..66da5aaa42 --- /dev/null +++ b/_pages/fi_FI/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/fi_FI/seedminer.txt b/_pages/fi_FI/seedminer.txt index e23dda4df1..d0573283e9 100644 --- a/_pages/fi_FI/seedminer.txt +++ b/_pages/fi_FI/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Menetelmät -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/fi_FI/site-navigation.txt b/_pages/fi_FI/site-navigation.txt index 86b1009e58..f7792721c6 100644 --- a/_pages/fi_FI/site-navigation.txt +++ b/_pages/fi_FI/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Asennuksen viimeistely](finalizing-setup) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Boot9strapin asentaminen (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [EmuNANDin siirtäminen](move-emunand) + [ntrboot](ntrboot) + [Alueen vaihtaminen](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Vianmääritys](troubleshooting) + [CFW:n poistaminen](uninstall-cfw) + [B9S:n päivittäminen](updating-b9s) diff --git a/_pages/fr_FR/finalizing-setup.txt b/_pages/fr_FR/finalizing-setup.txt index 67d89ca455..5dd0ec4043 100644 --- a/_pages/fr_FR/finalizing-setup.txt +++ b/_pages/fr_FR/finalizing-setup.txt @@ -72,7 +72,7 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou 1. Lancez l'application Mode Téléchargement (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Attendez jusqu'à ce que vous voyiez les deux boutons -1. Appuyez simultanément sur (L) + (Bas) + (Select) pour ouvrir le menu Rosalina +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Sélectionnez "Miscellaneous options" 1. Sélectionnez "Switch the hb. title to the current app." 1. Appuyez sur (B) pour continuer diff --git a/_pages/fr_FR/installing-boot9strap-(usm).txt b/_pages/fr_FR/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..dd3b08e253 --- /dev/null +++ b/_pages/fr_FR/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installation de boot9strap (USM)" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +Afin d'exploiter le firmware SAFE_MODE de notre console, nous devons injecter un profil WiFi exploité. + +Nous pouvons le faire en utilisant un exploit existant, BannerBomb3. + +Pour accomplir cela, nous utilisons la clé de chiffrement de votre console (movable.sed) pour créer une sauvegarde DSiWare qui exploite le système afin d'injecter le profil WiFi exploité dans votre liste de connexions. + +Une fois le profil WiFi injecté, nous utiliserons SAFE_MODE, qui est une fonctionnalité de récupération présente sur toutes les consoles 3DS, pour activer le profil WiFi exploité. + +Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée indiquées par les lettres U, E, J ou K après le numéro de version de la console. + +Si vos boutons (L/R), (Haut sur la croix directionnelle) ou (A) ne fonctionnent pas, vous devrez utiliser une [Ancienne Méthode](legacy-methods). Pour obtenir de l'aide, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide en anglais. +{: .notice--danger} + +## Ce dont vous avez besoin + +* Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer) +* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Préparatifs + +1. Ouvrez [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) sur votre ordinateur +1. Téléchargez votre movable.sed en utilisant l'option "Choisir le fichier" +1. Cliquez sur "Download unSAFE_MODE-bb3 archive" + + Ceci va télécharger un exploit DSiWare appelé `F00D43D5.bin` et un fichier d'exploit SAFE_MODE appelé `usm.bin` dans un dossier zip (`unSAFE_MODE-bb3.zip`) +1. Si votre console est allumée, éteignez-la +1. Insérez votre carte SD dans votre ordinateur +1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD +1. Copiez `usm.bin` depuis l'archive USM (`unSAFE_MODE-bb3.zip`) vers la racine de votre carte SD +1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` sur votre carte SD + + Cet `` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) + + Si `Nintendo DSiWare` n'existe pas, créez-le +1. S'il y a des copies de DSiWare existantes (`.bin`) dans ce dossier, déplacez-les sur votre PC + + Cela vous laissera avec un dossier Nintendo DSiWare vide. Déplacer ces fichiers sur votre PC vous permet de ne pas perdre vos éventuelles sauvegardes existantes +1. Copiez le fichier `F00D43D5.bin` depuis l'archive USM (`unSAFE_MODE-bb3.zip`) vers le dossier `Nintendo DSiWare` + +#### Section II - BannerBomb3 + +1. Réinsérez votre carte SD dans votre 3DS +1. Allumez à présent votre 3DS +1. Lancez les Paramètres de la console +1. Naviguez vers`Gestion des données` -> `DSiWare` +1. Cliquez sur l'onglet Carte SD + + Votre écran du bas devrait clignoter en Rouge, puis la console redémarrera sur le menu HOME quelques secondes plus tard. Cela signifie que le profil exploité a été copié avec succès +1. Éteignez votre 3DS + +#### Section III - unSAFE_MODE + +1. Votre console toujours éteinte, maintenez enfoncé les boutons suivants : (L) + (R) + (Haut sur la croix directionnelle) + (A), puis appuyez sur (Power) + + Relâchez les boutons après quelques secondes. Votre console démarrera en mode sans échec +1. Appuyez sur "OK" pour accepter la mise à jour + + Aucune mise à jour nécessaire. Ceci fait partie de l'exploit +1. Appuyez sur « J'accepte » pour accepter les termes et conditions +1. La mise à jour finira par échouer, avec le code d'erreur `003-1099`. Ne vous inquiétez pas, c'est normal +1. Lorsque votre console vous demande "Paramétrer la connexion Internet de la console ?", sélectionnez "Paramétrer" +1. Dans le menu suivant, accédez à `Connexion 1` -> `Modifier` -> `Page suivante (flèche de droite)` -> `Serveur proxy` -> `Paramètres avancés` +1. Une fois que vous voyez `B9S install SUCCESS` sur l'écran du haut, appuyez sur n'importe quel bouton pour redémarrer sur le menu de configuration de Luma + +#### Section IV - Configuration de Luma3DS + +1. Votre console devrait afficher automatiquement le menu de configuration de Luma +1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants: + + **"Show NAND or user string in System Settings"** +1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + + Votre console devrait afficher le Menu HOME après un court instant. Si vous avez un écran noir depuis plus de 5 minutes, [suivez ce guide de dépannage](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restauration des profils de connexion WiFi + +1. Lancez les Paramètres de la console +1. Naviguez vers`Gestion des données` -> `DSiWare` +1. Cliquez sur l'onglet Carte SD + + Votre écran du bas devrait clignoter en Vert, puis la console redémarrera sur le menu HOME quelques secondes plus tard. Cela signifie que vos profils de connexion WiFi ont été restaurés avec succès +1. Éteignez votre console +1. Insérez votre carte SD dans votre ordinateur +1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` sur votre carte SD + + Cet `` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) +1. Supprimez `F00D43D5.bin` de votre dossier Nintendo DSiWare +1. Continuez vers la finalisation de l'installation + +___ + +### Continuer vers [Finalisation de l'installation](finalizing-setup) +{: .notice--primary} diff --git a/_pages/fr_FR/legacy-methods.txt b/_pages/fr_FR/legacy-methods.txt new file mode 100644 index 0000000000..67b633343d --- /dev/null +++ b/_pages/fr_FR/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Anciennes Méthodes" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +Il y a eu de multiples améliorations et avancées dans les méthodes d'installation du CFW au cours de ces derniers temps. + +C'est pour cette raison qu'il est recommandé d'utiliser la méthode la plus récente que vous trouverez sur la page [Seedminer](seedminer). + +Cependant, des méthodes "anciennes" ou périmées sont conservées ici à diverses fins. Elles nécessiteront que vous ayez au préalable suivi [Seedminer](seedminer). + +Si vous avez besoin d'aide, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide en anglais. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx a également une sous-méthode : [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +Toutes ces options devraient également se terminer par [Finalisation de l'installation](finalizing-setup). \ No newline at end of file diff --git a/_pages/fr_FR/seedminer.txt b/_pages/fr_FR/seedminer.txt index 02f559dc56..72e6d4d98f 100644 --- a/_pages/fr_FR/seedminer.txt +++ b/_pages/fr_FR/seedminer.txt @@ -75,29 +75,20 @@ Il existe deux méthodes différentes pour l'exploit Seedminer (décrit plus en + Gardez ce fichier car vous en aurez besoin dans les pages à venir ___ -### Méthodes -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -Cette méthode d'utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier `movable.sed` pour déchiffrer n'importe quel titre DSiWare afin d'injecter un titre DSiWare exploitable dans l'application Connexions Nintendo DS. +Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour tirer parti des exploits du firmware SAFE_MODE présent sur toutes les consoles 3DS. Cette méthode est compatible avec toutes les régions, sauf la région CHN, qui n'est pas couverte par ce guide. -Cette méthode nécessite que l'application Connexions Nintendo DS fonctionne correctement (voir le test en haut de cette page). - -Continuez vers [BannerBomb3](bannerbomb3) +Continuer vers [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Anciennes Méthodes -Cette méthode d'utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier `movable.sed` pour accéder à l'Homebrew Launcher en utilisant l'exploit PicHaxx pour dumper un DSiWare système. Cette méthode requiert que vous possédiez (ou téléchargiez) le jeu gratuit "Pokémon Picross" depuis l'eShop. - -Cette méthode n'est compatible qu'avec les régions EUR, JPN et USA et est un peu plus compliquée que la méthode du dessus. Il est recommandé d'utiliser cette méthode uniquement si votre application Connexions Nintendo DS n'est pas fonctionnelle. - -Continuez vers [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +Ces méthodes sont désuètes et ne sont pas recommandées sauf si vous avez une raison spécifique de les utiliser, ou qu'il vous a été conseillé de les utiliser. +[Anciennes Méthodes](legacy-methods) \ No newline at end of file diff --git a/_pages/fr_FR/site-navigation.txt b/_pages/fr_FR/site-navigation.txt index 52ed1feadf..490754e90c 100644 --- a/_pages/fr_FR/site-navigation.txt +++ b/_pages/fr_FR/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalisation de l'installation](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installation de boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installation de boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installation de boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installation de boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installation de boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installation de boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Transférer une EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Changement de Région](region-changing) + [Seedminer](seedminer) ++ [Anciennes Méthodes de Seedminer](legacy-methods) + [Dépannage](troubleshooting) + [Désinstallation du CFW](uninstall-cfw) + [Mettre à jour B9S](updating-b9s) diff --git a/_pages/he_IL/finalizing-setup.txt b/_pages/he_IL/finalizing-setup.txt index 60e5f6e763..54d4c5f86e 100644 --- a/_pages/he_IL/finalizing-setup.txt +++ b/_pages/he_IL/finalizing-setup.txt @@ -72,7 +72,7 @@ If, while following a previous version of this guide, you CTRTransfered your *Ne 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. תלחצו (L) + (Down) + (Select) באותו זמן כדי לפתוח את התפריט של Rosalina +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. תבחרו ב "Miscellaneous options" 1. תבחרו ב "Switch the hb. title to the current app." 1. תלחצו (B) כדי להמשיך diff --git a/_pages/he_IL/installing-boot9strap-(usm).txt b/_pages/he_IL/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..94b71e5433 --- /dev/null +++ b/_pages/he_IL/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### חלק I - הכנות + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. תכניסו את ה-SD שלכם למחשב +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם +1. תפעילו את המכשיר +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. תכבו את המכשיר + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### חלק IV - הגדרת Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות: + + **"Show NAND or user string in System Settings"** +1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. תכניסו את ה-SD שלכם למחשב +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/he_IL/legacy-methods.txt b/_pages/he_IL/legacy-methods.txt new file mode 100644 index 0000000000..7a58ea5203 --- /dev/null +++ b/_pages/he_IL/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/he_IL/seedminer.txt b/_pages/he_IL/seedminer.txt index a012b146aa..3c001f906a 100644 --- a/_pages/he_IL/seedminer.txt +++ b/_pages/he_IL/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### דרכים -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/he_IL/site-navigation.txt b/_pages/he_IL/site-navigation.txt index 6b2593a150..483d58d915 100644 --- a/_pages/he_IL/site-navigation.txt +++ b/_pages/he_IL/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [סיום התהליך](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [התקנת boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [הזזת EmuNAND](move-emunand) + [ntrboot](ntrboot) + [שינוי אזור](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [פתרון בעיות](troubleshooting) + [הסרת CFW](uninstall-cfw) + [עדכון B9S](updating-b9s) diff --git a/_pages/hr_HR/finalizing-setup.txt b/_pages/hr_HR/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/hr_HR/finalizing-setup.txt +++ b/_pages/hr_HR/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/hr_HR/installing-boot9strap-(usm).txt b/_pages/hr_HR/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/hr_HR/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/hr_HR/legacy-methods.txt b/_pages/hr_HR/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/hr_HR/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/hr_HR/seedminer.txt b/_pages/hr_HR/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/hr_HR/seedminer.txt +++ b/_pages/hr_HR/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/hr_HR/site-navigation.txt b/_pages/hr_HR/site-navigation.txt index 07472505a7..a878c9c847 100644 --- a/_pages/hr_HR/site-navigation.txt +++ b/_pages/hr_HR/site-navigation.txt @@ -5,16 +5,16 @@ sitemap: false --- {% capture notice-1 %} -**Popüler** +**Popular** + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
{% capture notice-2 %} -**Hepsi** +**All** + [A9LH to B9S](a9lh-to-b9s) + [BannerBomb3](bannerbomb3) @@ -32,11 +32,11 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) -+ [Başlarken](get-started) ++ [Get Started](get-started) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) -+ [Homebrew Launcher (Alternatifler)](homebrew-launcher-(alternatives)) ++ [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) + [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) @@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [EmuNAND' Taşıma](move-emunand) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) -+ [Bölge Değiştirme](region-changing) ++ [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/hu_HU/finalizing-setup.txt b/_pages/hu_HU/finalizing-setup.txt index 2880e9ecb0..04d0c91347 100644 --- a/_pages/hu_HU/finalizing-setup.txt +++ b/_pages/hu_HU/finalizing-setup.txt @@ -72,7 +72,7 @@ Amennyiben ezen leírás megkezdése előtt már rendelkeztél EmuNAND-dal, és 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Nyomd meg az (L) + (Le) + (Select) gombokat egyszerre, hogy a Rosalina menü megnyitásához +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Válaszd ki a "Miscellaneous options"-t 1. Válaszd a "Switch the hb. title to the current app." opciót 1. Nyomd meg a (B) gombot a folytatáshoz diff --git a/_pages/hu_HU/installing-boot9strap-(usm).txt b/_pages/hu_HU/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..1a9fadd2ef --- /dev/null +++ b/_pages/hu_HU/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### Amire szükséged lesz + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Első rész - Előkészületek + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Helyezd az SD kártyád a számítógépbe +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Tedd vissza az SD kártyád a készülékedbe +1. Kapcsold be a készülékedet +1. Lépj be a System Settings-be a készülékeden +1. Navigálj ide: `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Kapcsold ki a készüléked + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Negyedik rész - Luma3DS konfigurálása + +1. Your device should automatically show the Luma Configuration menu +1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + + **"Show NAND or user string in System Settings"** +1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Lépj be a System Settings-be a készülékeden +1. Navigálj ide: `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Helyezd az SD kártyád a számítógépbe +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Tovább a [telepítés véglegesítésére](finalizing-setup) +{: .notice--primary} diff --git a/_pages/hu_HU/legacy-methods.txt b/_pages/hu_HU/legacy-methods.txt new file mode 100644 index 0000000000..21dcf0a629 --- /dev/null +++ b/_pages/hu_HU/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/hu_HU/seedminer.txt b/_pages/hu_HU/seedminer.txt index aa0c7eff43..adde27ff06 100644 --- a/_pages/hu_HU/seedminer.txt +++ b/_pages/hu_HU/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Módszerek -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/hu_HU/site-navigation.txt b/_pages/hu_HU/site-navigation.txt index 4e41fa907e..7b9d657df5 100644 --- a/_pages/hu_HU/site-navigation.txt +++ b/_pages/hu_HU/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Telepítés véglegesítése](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [boot9strap telepítése (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [boot9strap telepítése (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [EmuNAND költöztetése](move-emunand) + [ntrboot](ntrboot) + [Régióváltás](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Hibaelhárítás](troubleshooting) + [CFW eltávolítása](uninstall-cfw) + [B9S frissítése](updating-b9s) diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/id_ID/finalizing-setup.txt +++ b/_pages/id_ID/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/id_ID/installing-boot9strap-(usm).txt b/_pages/id_ID/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/id_ID/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/id_ID/legacy-methods.txt b/_pages/id_ID/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/id_ID/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/id_ID/seedminer.txt b/_pages/id_ID/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/id_ID/seedminer.txt +++ b/_pages/id_ID/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/id_ID/site-navigation.txt b/_pages/id_ID/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/id_ID/site-navigation.txt +++ b/_pages/id_ID/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt index 5de905c2c1..cf99b4a86f 100644 --- a/_pages/it_IT/finalizing-setup.txt +++ b/_pages/it_IT/finalizing-setup.txt @@ -72,7 +72,7 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e 1. Avvia l'applicazione "Modalità download" (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Attendi finché non vedrai i due pulsanti -1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Seleziona "Miscellaneous options" 1. Seleziona "Switch the hb. title to the current app." 1. Premi (B) per continuare diff --git a/_pages/it_IT/godmode9-usage.txt b/_pages/it_IT/godmode9-usage.txt index 93f6783a45..e9fc2ec057 100644 --- a/_pages/it_IT/godmode9-usage.txt +++ b/_pages/it_IT/godmode9-usage.txt @@ -128,7 +128,7 @@ Inserisci nella console la scheda di gioco del quale vuoi creare un backup 1. Seleziona il drive appropriato per il tipo di titolo di cui vuoi creare un backup: + **Titolo installato dall'utente**: `[A:] SYSNAND SD` + **Titolo di sistema**: `[1:] SYSNAND CTRNAND` -1. Tenendo premuto (R), premi (B) per aprire le opzioni del drive +1. Tenendo premuto (R), premi (A) per aprire le opzioni del drive 1. Seleziona "Search for titles" 1. Premi il pulsante (A) per continuare 1. Premi (A) sul file `.tmd` per selezionarlo, quindi seleziona "TMD file options...", ed infine seleziona "Build CIA (standard)" diff --git a/_pages/it_IT/home.txt b/_pages/it_IT/home.txt index 6cace7e0a2..87710fb4b9 100644 --- a/_pages/it_IT/home.txt +++ b/_pages/it_IT/home.txt @@ -37,7 +37,7 @@ Questa guida ha bisogno del *tuo* aiuto per il seeding di [questi]({{ "rss.xml" ## Cosa vuol dire Homebrew? -[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. Tra questi ci sono utilities, applicazioni, giochi ed emulatori. +Con [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) di solito si fa riferimento a software non autorizzato da Nintendo. Tra questi ci sono utilities, applicazioni, giochi ed emulatori. Nella maggior parte dei casi, l'avvio di homebrew sulla tua console è al 100% gratis grazie all'applicazione Sound Nintendo 3DS. È comunque possibile avviare gli homebrew tramite exploit alternativi basati su giochi commerciali e sul browser internet di sistema. diff --git a/_pages/it_IT/homebrew-launcher-(pichaxx).txt b/_pages/it_IT/homebrew-launcher-(pichaxx).txt index ad3866b66c..288f86fff1 100644 --- a/_pages/it_IT/homebrew-launcher-(pichaxx).txt +++ b/_pages/it_IT/homebrew-launcher-(pichaxx).txt @@ -32,7 +32,7 @@ Se possiedi già Pokémon Picross, questo processo sovrascriverà il tuo salvata #### Sezione II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Apri [il sito di PicHaxx Injector](https://seedminer.hacks.guide/pichaxx/) sul tuo computer 1. Seleziona il tuo file `movable.sed` 1. Seleziona "Build and Download" 1. Attendi il termine del processo diff --git a/_pages/it_IT/homebrew-launcher-(steelhax).txt b/_pages/it_IT/homebrew-launcher-(steelhax).txt index f17e850a6d..bec53e8af8 100644 --- a/_pages/it_IT/homebrew-launcher-(steelhax).txt +++ b/_pages/it_IT/homebrew-launcher-(steelhax).txt @@ -40,7 +40,7 @@ Se possiedi già Steel Diver: Sub Wars, questo processo sovrascriverà il tuo sa 1. Chiudi "Steel Diver: Sub Wars" 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer +1. Apri [il sito di Steelminer Injector](https://seedminer.hacks.guide/steelhax/) sul tuo computer 1. Seleziona il tuo file `movable.sed` 1. Seleziona "Start!" 1. Attendi il termine del processo diff --git a/_pages/it_IT/installing-boot9strap-(soundhax).txt b/_pages/it_IT/installing-boot9strap-(soundhax).txt index f229d68991..6961eccf39 100644 --- a/_pages/it_IT/installing-boot9strap-(soundhax).txt +++ b/_pages/it_IT/installing-boot9strap-(soundhax).txt @@ -6,13 +6,13 @@ title: "Installazione di boot9strap (Soundhax)" ### Lettura necessaria -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (combinato a pre9otherapp) è compatibile con le versioni del software comprese tra 2.1.0 e 8.1.0 nelle regioni EUR, JPN, KOR e USA. {% capture notice-1 %} Tieni presente che tramite scheda di gioco vengono aggiornate solamente le applicazioni principali del sistema, come le Impostazioni della console, il menu HOME, ecc. Non vengono invece aggiornate le funzionalità come Sound Nintendo 3DS o le funzionalità che necessitano di Internet, come ad esempio il Trasferimento dati, il Browser Internet, la Piazza Mii StreetPass o l'eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Ti occorrerà un metodo alternativo per avviare l'Homebrew Launcher, come [Installazione di boot9strap (Browser)](installing-boot9strap-(browser)) o [Installazione di boot9strap (MSET)](installing-boot9strap-(mset))! +Ciò significa che se aggiorni con una scheda di gioco da una versione avente una versione di Sound Nintendo 3DS obsoleta *(<2.1.0)* ad una versione con la stessa applicazione aggiornata, Soundhax non funzionerà! Ti occorrerà un metodo alternativo per avviare l'Homebrew Launcher, come [Installazione di boot9strap (Browser)](installing-boot9strap-(browser)) o [Installazione di boot9strap (MSET)](installing-boot9strap-(mset))! {% endcapture %}
{{ notice-1 | markdownify }}
diff --git a/_pages/it_IT/installing-boot9strap-(usm).txt b/_pages/it_IT/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..10444d3cf8 --- /dev/null +++ b/_pages/it_IT/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### Cosa serve + +* Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer) +* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Sezione I - Preparazione + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Carica il tuo file movable.sed scegliendo l'opzione "Choose File" +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. Se la tua console è accesa, spegnila +1. Inserisci la scheda SD nel tuo computer +1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` + + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) + + Se la cartella `Nintendo DSiWare` non esiste, creala +1. Se ci sono file di backup DSiWare esistenti (``) nella cartella, spostali sul tuo PC + + Così facendo la cartella Nintendo DSiWare verrà svuotata. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinserisci la scheda SD nella tua console +1. Accendi la console +1. Avvia "Impostazioni della console" +1. Entra in `Gestione dati` -> `DSiWare` +1. Clicca sulla sezione Scheda SD + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Spegni il tuo 3DS + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Sezione IV - Configurare Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + + **"Show NAND or user string in System Settings"** +1. Premi (Start) per salvare e riavviare il 3DS + + La console dovrebbe avviare il menu HOME dopo un po'. Se ottieni uno schermo nero per più di 5 minuti, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Avvia "Impostazioni della console" +1. Entra in `Gestione dati` -> `DSiWare` +1. Clicca sulla sezione Scheda SD + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Inserisci la scheda SD nel tuo computer +1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` + + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Prosegui con il [Completamento dell'installazione](finalizing-setup) +{: .notice--primary} diff --git a/_pages/it_IT/legacy-methods.txt b/_pages/it_IT/legacy-methods.txt new file mode 100644 index 0000000000..37ca9b14ad --- /dev/null +++ b/_pages/it_IT/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/it_IT/ntrboot.txt b/_pages/it_IT/ntrboot.txt index 2afc8d6922..3d085f63ce 100644 --- a/_pages/it_IT/ntrboot.txt +++ b/_pages/it_IT/ntrboot.txt @@ -20,7 +20,7 @@ Tieni presente che alcune cartucce hanno una "bomba a tempo" che impedirà loro | [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | €15.99 | 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato**; è possibile riflasharla per ripristinarla a flashcart NDS. | | [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | €19.99 | No | <= 11.13.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** ([Presenta un interruttore per alternare le modalità ntrboot e NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); da non flashare manualmente con ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | €20.99 | No | <= 4.3.0 | <= 1.4.4 | | -| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | +| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | €9.99 | No | Nessuna | Nessuna | Solo i modelli con [determinati flash chip](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) sono compatibili con ntrboot. | | [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | €19.99 | No | <= 11.13.0 | <= 1.4.5 | Tutte le versioni di RTS sono compatibili. | | [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | €13.99 | 1.87: 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | | diff --git a/_pages/it_IT/region-changing.txt b/_pages/it_IT/region-changing.txt index 4ac4e6158e..cc6b9672d2 100644 --- a/_pages/it_IT/region-changing.txt +++ b/_pages/it_IT/region-changing.txt @@ -8,7 +8,7 @@ title: "Cambiare regione" In questa sezione aggiuntiva verrà spiegato come cambiare regionalità su SysNAND con CFW. Per questo scopo, verrà eseguito un CTRTransfer alla versione 11.5.0 della regione alla quale si desidera passare. -Tuttavia, il cambio della regione è quasi completamente inutile in quanto Luma3DS supporta l'avvio di giochi di altre regioni e l'[Emulazione Regionale](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features) su titoli individuali. Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). +Tuttavia, il cambio della regione è quasi completamente inutile in quanto Luma3DS supporta l'avvio di giochi di altre regioni e l'[Emulazione Regionale](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features) su titoli individuali. Inoltre, è possibile avviare giochi NDS con lingue alternative [TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di questa guida avrai bisogno di un client torrent come [Deluge](http://dev.deluge-torrent.org/wiki/Download). diff --git a/_pages/it_IT/seedminer.txt b/_pages/it_IT/seedminer.txt index 14f9a20004..d5e780600c 100644 --- a/_pages/it_IT/seedminer.txt +++ b/_pages/it_IT/seedminer.txt @@ -54,7 +54,7 @@ Dopo l'esecuzione dell'exploit Seedminer possono essere eseguiti due diversi exp #### Sezione III - Seedminer -1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer +1. Avvia [Bruteforce Movable](https://seedminer.hacks.guide/) sul tuo computer + Questo sito permette il recupero automatico del file `movable_part1.sed` (utilizzando una console 3DS fittizia) e la decriptazione della chiave DSiWare della tua console (utilizzando Seedminer tramite il computer di un volontario) + Se il servizio automatizzato non funziona, entra nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) (in Inglese) per richiedere assistenza 1. Inserisci il Codice Amico della tua console (senza spazi o trattini) nel campo "Your friend code" @@ -75,29 +75,20 @@ Dopo l'esecuzione dell'exploit Seedminer possono essere eseguiti due diversi exp + Conserva questo file in quanto ti servirà nelle pagine successive ___ -### Metodi -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -Seedminer utilizza il tuo file `movable.sed` per decriptare un qualunque titolo DSiWare per iniettare una particolare applicazione DSiWare nell'applicazione Impostazioni Internet DS. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. Questo metodo è compatibile con tutte le regioni, anche se la regione CHN non è coperta da questa guida. -Questo metodo richiede che le Impostazioni Internet DS funzionino regolarmente (vedi il test in cima a questa pagina). - -Prosegui con [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -Seedminer utilizza il tuo file `movable.sed` per ottenere accesso all'Homebrew Launcher tramite l'exploit PicHaxx per eseguire il dump di un'applicazione DSiWare di sistema. Questo metodo richiede il possesso (o lo scaricamento) del gioco gratuito "Pokémon Picross" dall'eShop. - -Questo metodo è compatibile con le regioni EUR, JPN e USA, ed è leggermente più complicato del precedente. È consigliabile utilizzare questo metodo solo se non hai un'applicazione Connessioni Nintendo DS funzionante. - -Prosegui con l'[Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt index 37ba4ddfc5..86f4699a76 100644 --- a/_pages/it_IT/site-navigation.txt +++ b/_pages/it_IT/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Completamento dell'installazione](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installazione di boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installazione di boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installazione di boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installazione di boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Spostare l'EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Cambiare regione](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Risoluzione dei problemi](troubleshooting) + [Disinstallare il CFW](uninstall-cfw) + [Aggiornare B9S](updating-a9lh) diff --git a/_pages/it_IT/uninstall-cfw.txt b/_pages/it_IT/uninstall-cfw.txt index 35afbc7eaa..89bced90a3 100644 --- a/_pages/it_IT/uninstall-cfw.txt +++ b/_pages/it_IT/uninstall-cfw.txt @@ -45,7 +45,7 @@ Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella carte 1. Seleziona `Mount image to drive` 1. Nella finestra che appare, apri la cartella `exefs` 1. In questa cartella, scegli il file `.firm` -1. Select "Firm Image Options" +1. Seleziona "Firm Image Options" 1. Seleziona "Boot Firm" 1. Quando richiesto, scegli le opzioni per decriptare a fare una copia 1. Ora dovrebbe avviarsi il normale menu HOME del 3DS. In tal caso, spegni la console e prosegui con la prossima sezione diff --git a/_pages/ja_JP/finalizing-setup.txt b/_pages/ja_JP/finalizing-setup.txt index 2834bb4f6b..fb319d2aed 100644 --- a/_pages/ja_JP/finalizing-setup.txt +++ b/_pages/ja_JP/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/ja_JP/home.txt b/_pages/ja_JP/home.txt index 6cace7e0a2..a0c61c5273 100644 --- a/_pages/ja_JP/home.txt +++ b/_pages/ja_JP/home.txt @@ -1,91 +1,91 @@ --- layout: splash -title: "Guida per l'Hacking del 3DS" # +title: "3DS Hacks Guide" # header: overlay_color: "#5e616c" # overlay_image: /images/home-page-feature.jpg overlay_filter: 0.5 caption: -excerpt: "La guida omnicomprensiva per installare un custom firmware su 3DS,
da zero a boot9strap.
" +excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" --- -Per la lista di tutte le guide per l'installazione di homebrew e custom firmware su altre console, visita [Hacks.Guide](https://hacks.guide). +For complete guides to homebrew and custom firmware for other devices, check out [Hacks.Guide](https://hacks.guide). {: .notice--primary} ___ -Leggi attentamente tutte le pagine introduttive (compresa questa!) prima di continuare. +Thoroughly read all of the introductory pages (including this one!) before proceeding. {: .notice--warning} {% capture notice-1 %} -Questa guida è riservata _solamente_ alle console retail (cioè quelle acquistate in negozio, non quelle ottenute tramite il Nintendo Developer Program)! -Se hai una console per sviluppatori ("PANDA"), visita la [Guida all'Hacking di un 3DS Panda](https://panda.hacks.guide). +This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! +If you have a developer ("PANDA") console, check out the [Panda 3DS Hacks Guide](https://panda.hacks.guide). {% endcapture %}
{{ notice-1 | markdownify }}
{% capture notice-1 %} -Questa guida è disponibile anche in altre lingue! -Clicca l'icona in alto a destra per cambiare la lingua. -Oppure, clicca [qui](https://crowdin.com/project/3ds-guide) per aiutare a mantenere queste traduzioni aggiornate. +This guide is available in other languages! +Click the icon at the top right of the page to change the language. +Alternatively, click [here](https://crowdin.com/project/3ds-guide) to help to keep these translations up to date. {% endcapture %}
{{ notice-1 | markdownify }}
-Questa guida ha bisogno del *tuo* aiuto per il seeding di [questi]({{ "rss.xml" | absolute_url }}) torrent! +This guide needs *your* help to seed [these]({{ "rss.xml" | absolute_url }}) torrents! {: .notice--primary} -## Cosa vuol dire Homebrew? +## Homebrewとは -[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. Tra questi ci sono utilities, applicazioni, giochi ed emulatori. +[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. This includes homebrew tools, applications, games, and emulators. -Nella maggior parte dei casi, l'avvio di homebrew sulla tua console è al 100% gratis grazie all'applicazione Sound Nintendo 3DS. È comunque possibile avviare gli homebrew tramite exploit alternativi basati su giochi commerciali e sul browser internet di sistema. +In many cases, running homebrew on your device is 100% free using just the Nintendo 3DS Sound app. There are also various other exploits in commercial games and the browser to get homebrew running. -## Cosa vuol dire Custom Firmware? +## カスタムファームウェアとは -Un **Custom Firmware** ("CFW") ti permette di accedere a funzionalità avanzate (spesso) non disponibili con un homebrew userland. Ad esempio, le signature patch ti permettono di installare titoli non firmati in modo tale che appaiano nel menu HOME. +**カスタム ファームウェア** ("CFW") は高度な技術によりHomebrewでは実現できないようなハッキングを実現しています。 例えば「署名回避パッチ」は、署名のない、許可されていないソフトをHOMEメニューにインストールできます。 -È possibile installare un CFW su qualunque console di qualunque versione (ma in caso sia superiore a 11.3.0 possono essere necessari ulteriori tool o accessori). +CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0). -## Cosa viene installato con questa guida? +## ごのガイドでインストールされるもの -Lo scopo di questa guida è di installare in un normale 3DS mai modificato -un Custom Firmware basato su boot9strap. Con alcune versioni del software di sistema è necessario utilizzare degli homebrew come punto di partenza, ma il Custom Firmware rimane comunque l'obiettivo finale. +このガイドの目的は、通常の3DSファームウェアを +firmware to boot9strap powered Custom Firmware. 一部のバージョンではHomebrewを利用していますが、最終的にはカスタムファームウェアを導入します。 -boot9strap è attualmente il più recente e miglior metodo per installare un Custom Firmware in grado di fornirci pieno controllo della console a pochi istanti dal boot, con un effetto simile a quello di BootMii su Wii. Ha effetto temporalmente prima di quanto accadeva con arm9loaderhax e, a differenza di un sighax standard, boot9strap utilizza un exploit basato su sovrascrittura di NDMA per acquisire l'esecuzione di codice Boot9. Questo vuol dire che qualunque console che avvii boot9strap è in grado di creare un dump del file OTP univoco della console (`OTP.bin`), della bootrom ARM11 (`boot11.bin`) e della bootrom ARM9 (`boot9.bin`). +boot9strap is the newest and best method of launching Custom Firmware that gives us nearly full control of the system only milliseconds into boot, which is similar to the effect of BootMii for the Wii. It gives us even earlier control than arm9loaderhax did, and, unlike standard sighax, boot9strap uses an NDMA overwrite exploit in order to gain Boot9 code execution. This means that any console running boot9strap is capable of dumping the console unique OTP (`OTP.bin`), the ARM11 bootrom (`boot11.bin`), and the ARM9 bootrom (`boot9.bin`). -L'uso di boot9strap rispetto metodi preesistenti per l'avvio di un Custom Firmware è consigliato sotto ogni aspetto, per cui si raccomanda l'uso di questa guida al posto di procedure basate su software ormai datati (come menuhax + rxTools, arm9loaderhax, o anche normali sighax). +The benefits of boot9strap over other Custom Firmware launch methods are numerous, and as such it is recommended to use this guide over any other that relies on outdated software (such as menuhax + rxTools, arm9loaderhax, or even normal sighax). -Per informazioni sul funzionamento di boot9strap, consulta [questo articolo](https://arxiv.org/abs/1802.00359). +For information on how boot9strap works, please see [this paper](https://arxiv.org/abs/1802.00359). -Per una lista di tutte le firme di sighax, è possibile consultare [questo gist](https://gist.github.com/SciresM/cdd2266efb80175d37eabbe86f9d8c52). +For a list of each of the calculated sighax signatures, see [this gist](https://gist.github.com/SciresM/cdd2266efb80175d37eabbe86f9d8c52). -## Cosa posso fare con un Custom Firmware? +## カスタムファームウェアでできること -+ Giocare tutte le schede di gioco e tutti titoli dell'eShop, indipendentemente dalla regionalità -+ Personalizza il tuo Menu HOME con [temi e splash screen](https://themeplaza.eu/) creati dagli utenti -+ Applicare "ROMhack" a giochi posseduti -+ Catturare screenshot di applicazioni e giochi -+ Fare un backup, modificare e ripristinare i salvataggi di molti giochi -+ Avviare giochi per vecchie piattaforme usando emulatori, RetroArch o altri sistemi a sé stanti. (Di solito sono più performanti con un New Nintendo 3DS) -+ Installare titoli amatoriali sul tuo sistema e farli apparire sul tuo menu HOME -+ Installare le tue schede di gioco direttamente nella console per poterci giocare senza dover inserire la scheda -+ Solo con New 3DS o con New 2DS: fare dei live streaming sul tuo PC via wireless tramite NTR CFW -+ Utilizzare molte vecchie flashcard per il Nintendo DS che sono state bloccate tempo addietro o che non hanno mai funzionato su un Nintendo 3DS -+ Aggiornare all'ultima versione di sistema in sicurezza senza doversi preoccupare di perdere l'accesso agli homebrew ++ 地域に関係なく、すべてのゲームカードやダウンロードソフトを遊ぶ ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ 自分が所有するゲームに「ROMハック」を使用する ++ ゲームとアプリケーションのスクリーン ショットを取る事ができます。 ++ Backup, edit, and restore saves for many games ++ RetroArchを始めとしたエミュレータでレトロゲームを遊ぶ (Newニンテンドー3DS上ではさらに快適に動作します) ++ HomeBrewをインストールし、HOMEメニューから直接実行 ++ ゲームカードをインストール可能な形式で吸い出し、ゲームカードを使用せず遊ぶ ++ New 3DS or New 2DS only: stream live gameplay to your PC wirelessly with NTR CFW ++ 本体更新により対策されたDSマジコンを起動 ++ 自作ソフトが起動可能な状態を維持して本体更新 -## Cosa mi serve sapere prima di cominciare? +## 改造する前の注意点 -+ **Prima di seguire la guida, è necessario che tu conosca il rischio dell'hacking di un 3DS: OGNI volta che si modifica il sistema c'è sempre il rischio di un brick IRREVERSIBILE. È raro ma può sempre capitare, quindi assicurati di seguire ESATTAMENTE OGNI SINGOLO PASSAGGIO.** -+ Se hai già modificato in precedenza il tuo 3DS per configurare un'EmuNAND e vorresti spostare il contenuto dell'EmuNAND nel nuovo CFW SysNAND, segui tutte le istruzioni per ripristinare l'EmuNAND una volta raggiunta la sezione [Completamento dell'installazione](finalizing-setup). -+ Questa guida è applicabile a New 3DS, Old 3DS, New 2DS e Old 2DS di ogni regione e con versione del software 11.13.0 o inferiore. -+ Seguendo correttamente la guida non perderai alcun dato e manterrai tutto ciò che era installato nella console (per cui giochi, NNID, salvataggi, ecc verranno tutti conservati). -+ Mantieni sempre la console in carica per evitare la perdita di dati o danni derivanti dall'improvviso spegnimento della console! -+ La tua scheda SD dovrebbe essere [MBR e non GPT](http://www.howtogeek.com/245610/) (la scheda SD preconfezionata con la console è MBR di default). -+ Se devi formattare una nuova scheda SD, puoi usare [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) e impostare Allocation Unit Size a 32K (32768). -+ A livello di software, un Old 2DS è essenzialmente identico a un Old 3DS, mentre un New 2DS è essenzialmente identico ad un New 3DS. Qualunque istruzione indicante "Old 3DS" si applica anche agli Old 2DS, e qualunque istruzione relativa ai "New 3DS" si applica ai New 2DS. ++ **ガイドを始める前に、あなたの3DSが復元不可能なBRICK状態になるリスクが有ることを忘れないでください。 稀ではありますが、BRICKする可能性があります。必ず全ての指示に従ってください。** ++ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. +すべてが計画通りに進めば、データは全く失われず、導入前にあなたが使用していたすべてのもの (ゲーム、NNID、セーブデータなど) が保持されます。 ++ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! ++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). ++ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ -### Prosegui con [Cominciamo!](get-started) +### Continue to [Get Started](get-started) {: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(usm).txt b/_pages/ja_JP/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..059cb66c7f --- /dev/null +++ b/_pages/ja_JP/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. パソコンにSDカードを入れます +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **「Show NAND or user string in System Settings」** +1. (Start) を押してセーブして再起動します + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. パソコンにSDカードを入れます +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ja_JP/legacy-methods.txt b/_pages/ja_JP/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/ja_JP/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/ja_JP/seedminer.txt b/_pages/ja_JP/seedminer.txt index 999fc83d8a..a31503507a 100644 --- a/_pages/ja_JP/seedminer.txt +++ b/_pages/ja_JP/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/ja_JP/site-navigation.txt b/_pages/ja_JP/site-navigation.txt index ac2a57a141..820f64fd3d 100644 --- a/_pages/ja_JP/site-navigation.txt +++ b/_pages/ja_JP/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher（Soundhax）](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [EmuNANDを移動する](move-emunand) + [ntrboot](ntrboot) + [地域変更](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [トラブルシューティング](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ko_KR/finalizing-setup.txt b/_pages/ko_KR/finalizing-setup.txt index ae24e5880d..f0cb4df607 100644 --- a/_pages/ko_KR/finalizing-setup.txt +++ b/_pages/ko_KR/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/ko_KR/installing-boot9strap-(hardmod).txt b/_pages/ko_KR/installing-boot9strap-(hardmod).txt index 5f9050332c..ab36735c45 100644 --- a/_pages/ko_KR/installing-boot9strap-(hardmod).txt +++ b/_pages/ko_KR/installing-boot9strap-(hardmod).txt @@ -60,14 +60,14 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that #### Section I - Prep Work -1. 기기를 종료해 주세요. -1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Power off your device +1. パソコンにSDカードを入れます 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Copy the hardmod-b9s-installer folder from the hardmod-b9s-installer `.zip` to your computer 1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer 1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm` 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer -1. SD 카드를 기기에 다시 삽입해 주세요. +1. Reinsert your SD card into your device 1. Use your hardmod to create a NAND backup 1. Move your NAND backup to the hardmod-b9s-installer folder on your computer and rename it to `NAND.bin` @@ -77,17 +77,17 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that + Windows Users: Run `install-b9s.exe` + Mac and Linux Users: Run `install-b9s.py` 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod -1. 기기를 종료해 주세요. +1. Power off your device 1. Disconnect your hardmod -1. 기기를 시작해 주세요. +1. Power on your device #### Section III - Configuring Luma3DS 1. Your device should have booted into the Luma3DS configuration menu + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) 1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. + + **「Show NAND or user string in System Settings」** +1. (Start) を押してセーブして再起動します + If you get an error, just continue the next page ___ diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..ca99fcf3c0 --- /dev/null +++ b/_pages/ko_KR/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. SD 카드를 기기에 다시 삽입해 주세요. +1. 기기를 시작해 주세요. +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. 기기를 종료해 주세요. + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ko_KR/legacy-methods.txt b/_pages/ko_KR/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/ko_KR/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/ko_KR/seedminer.txt b/_pages/ko_KR/seedminer.txt index e010afb234..107e8b9d2a 100644 --- a/_pages/ko_KR/seedminer.txt +++ b/_pages/ko_KR/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/ko_KR/site-navigation.txt b/_pages/ko_KR/site-navigation.txt index 1a54bd13a9..fc55bb75da 100644 --- a/_pages/ko_KR/site-navigation.txt +++ b/_pages/ko_KR/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [홈브류 런처 (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [EmuNAND기반 데이터 이동](move-emunand) + [ntrboot](ntrboot) + [지역 변경](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [문제 해결](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ms_MY/donations.txt b/_pages/ms_MY/donations.txt index 579e1c2e72..7f5e56f592 100644 --- a/_pages/ms_MY/donations.txt +++ b/_pages/ms_MY/donations.txt @@ -1,5 +1,5 @@ --- -title: "Gimme Ye Gold" # +title: "Donations" # layout: single-no-ads --- diff --git a/_pages/ms_MY/finalizing-setup.txt b/_pages/ms_MY/finalizing-setup.txt index 07433281b7..c7cc92e950 100644 --- a/_pages/ms_MY/finalizing-setup.txt +++ b/_pages/ms_MY/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt index cc467beeaa..58d5b3e6fa 100644 --- a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt +++ b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt @@ -1,5 +1,5 @@ --- -title: "Installin' boot9strap (ntrboot)" +title: "Installing boot9strap (ntrboot)" --- {% include toc title="Table of Contents" %} @@ -10,35 +10,35 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this ### What You Need -* A magnet that triggers th' sleep mode 'o ye device (if ye be usin' a foldin' style one) -* Ye ntrboot-flashed flashcart +* A magnet that triggers the sleep mode of your device (if using a folding style device) +* Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) ### Instructions -#### Section I - Set th' sails (prep work) +#### Section I - Prep Work -1. Power off ye device +1. Power off your device 1. Insert your device's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` 1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on th' root 'o ye SD card -1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert ye SD card into ye device +1. Reinsert your SD card into your device 1. Power on your device #### Section II - ntrboot 1. Use the magnet to find the spot on your device where the sleep sensor is triggered + This step is not needed on the old 2DS (which has a sleep mode switch) -1. Power off ye device +1. Power off your device 1. Insert your flashcart into your device 1. Place the magnet on your device to trigger the sleep sensor + On old 2DS, you should instead enable the sleep mode switch @@ -48,26 +48,26 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this #### Section III - Installing boot9strap -1. Wait fer all safety checks to be completed +1. Wait for all safety checks to complete 1. Remove the magnet from your device + On old 2DS, you should instead disable the sleep mode switch -1. When prompted, input th' key combo given to be installin' boot9strap +1. When prompted, input the key combo given to install boot9strap 1. Once it has completed, force your device to power off by holding down the power button + Your device will only boot to the SafeB9SInstaller screen until the next section is completed #### Section IV - Configuring Luma3DS -1. Insert ye SD card into ye computer +1. Pasang kad SD anda ke dalam komputer 1. Delete `boot.firm` from the root of your SD card 1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Reinsert ye SD card into ye device +1. Reinsert your SD card into your device 1. Power on your device 1. Your device should have booted into the Luma3DS configuration menu + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Use th' (A) button 'n th' D-Pad to turn on th' followin': +1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -1. Press (Start) to save 'n reboot - + If ye be gettin' an error, jus' continue to th' next page +1. Tekan (Start) untuk save dan reboot + + If you get an error, just continue the next page ___ @@ -120,22 +120,22 @@ Do not follow this section until you have completed the rest of the instructions ##### Instructions -1. Power off ye device -1. Insert ye SD card into ye computer +1. Power off your device +1. Pasang kad SD anda ke dalam komputer + This is the SD card from your 3DS, *not* the SD card from your flashcart 1. Create a folder named `ntrboot` on the root of your SD card 1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card 1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card -1. Reinsert ye SD card into ye device +1. Reinsert your SD card into your device 1. Insert your ntrboot compatible DS / DSi flashcart into your device 1. Launch ntrboot_flasher by holding (Start) during boot 1. Read the red screen warning -1. Press (A) to continue +1. Tekan (A) untuk meneruskan 1. Select your flashcart + If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option 1. Select "Restore Flash" 1. Press (A) to proceed -1. Wait 'til th' process be completed +1. Tunggu sehingga proses selesai 1. Press (A) to return to the main menu 1. Press (B) to power off your device diff --git a/_pages/ms_MY/installing-boot9strap-(usm).txt b/_pages/ms_MY/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..075b0a038e --- /dev/null +++ b/_pages/ms_MY/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Pasang kad SD anda ke dalam komputer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Tekan (Start) untuk save dan reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Pasang kad SD anda ke dalam komputer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ms_MY/legacy-methods.txt b/_pages/ms_MY/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/ms_MY/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/ms_MY/seedminer.txt b/_pages/ms_MY/seedminer.txt index 8e8c92d663..1bab74234d 100644 --- a/_pages/ms_MY/seedminer.txt +++ b/_pages/ms_MY/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/ms_MY/site-navigation.txt b/_pages/ms_MY/site-navigation.txt index bf532e56cf..ba87e1732c 100644 --- a/_pages/ms_MY/site-navigation.txt +++ b/_pages/ms_MY/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Pindah EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Menukar Kawasan](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Penyelesaian](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/nl_NL/finalizing-setup.txt b/_pages/nl_NL/finalizing-setup.txt index abd92335d0..ef32aa70cd 100644 --- a/_pages/nl_NL/finalizing-setup.txt +++ b/_pages/nl_NL/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/nl_NL/installing-boot9strap-(usm).txt b/_pages/nl_NL/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..9e2b1c1fdc --- /dev/null +++ b/_pages/nl_NL/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Plaats je SD kaart in je computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Stop je SD kaart terug in je 3DS +1. Zet je 3DS aan +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Schakel je 3ds uit + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Druk op (Start) om op te slaan en opnieuw op te starten + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Plaats je SD kaart in je computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/nl_NL/legacy-methods.txt b/_pages/nl_NL/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/nl_NL/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/nl_NL/move-emunand.txt b/_pages/nl_NL/move-emunand.txt index c8b08806fa..abb26363a7 100644 --- a/_pages/nl_NL/move-emunand.txt +++ b/_pages/nl_NL/move-emunand.txt @@ -6,7 +6,7 @@ title: "Move EmuNAND" ### Required Reading -Dit is de add-on-sectie voor het verplaatsen van een oude EmuNAND naar je nieuwe SysNAND CFW, en daarna het verwijderen van het oude EmuNAND gedeelte. Merk op dat de termen EmuNAND en RedNAND naar iets andere implementaties van [hetzelfde concept verwijzen](http://3dbrew.org/wiki/NAND_Redirection). +This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection). Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. @@ -15,7 +15,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. ### What You Need -* Een bestaande EmuNAND +* En eksisterende EmuNAND * The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) @@ -23,32 +23,32 @@ You MUST have already installed Luma3DS and boot9strap to use this. #### Section I - Prep Work -1. Schakel je 3DS uit -1. Plaats je SD kaart in je computer -1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Slå av enheten +1. Sett inn SD-kortet i datamaskinen din +1. Kopier `GodMode9.firm` fra GodMode9 `.zip` til `/luma/payloads/` på SD-kortet ditt 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card -1. Stop je SD kaart terug in je 3DS +1. Sett inn SD-kortet i konsollen igjen #### Section II - Backup SysNAND DSiWare Saves -Als je geen DSiWare spellen of saves hebt die je wilt behouden, kan je dit deel overslaan. +If you do not have any DSiWare games or saves that you care about, skip this section. {: .notice--info} 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide -1. Navigeer naar `[2:] SYSNAND TWLN` -> `title` +1. Navigér til `[2:] SYSNAND TWLN` -> `title` 1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9/out" - + Dit proces kan even duren als je veel DSiWare spellen hebt -1. Druk twee keer op (B) om terug te gaan naar het hoofdmenu + + This process may take some time if you have many DSiWare games +1. Trykk (B) to ganger for å gå tilbake til hovedmenyen #### Section III - Backup GBA VC Saves -Als je geen GBA VC spellen of saves hebt die je wat uit maken, kan je dit deel overslaan. +If you do not have any GBA VC games or saves that you care about, skip this section. {: .notice--info} -Dit is niet nodig voor elke andere soort van Virtual Console spellen (GBC, NES, etc) +Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc) {: .notice--info} The game will be outputted to the `/gm9/out/` folder on your SD card with the name `.gbavc.sav`. @@ -57,118 +57,118 @@ The game will be outputted to the `/gm9/out/` folder on your SD card with the na To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by hovering over `[A:] SYSNAND SD`, holding (R) and pressing (A) at the same time, then selecting "Search for titles". {: .notice--info} -1. Doe het volgende proces voor elk GBA VC spel waarvan je een backup van de save wil maken: - + Start het GBA VC spel - + Sluit het spel af - + Start je 3DS terwijl je (Start) ingedrukt houdt om het Luma3DS chainloader menu te openen - + Open GodMode9 door op (A) te drukken - + Navigeer naar `[S:] SYSNAND VIRTUAL` +1. Do the following process for each GBA VC game that you want to backup the save for: + + Launch the GBA VC game + + Exit the GBA VC game + + Boot your device while holding (Start) to launch the Luma3DS chainloader menu + + Start GodMode9 ved å trykke (A) + + Navigér til `[S:] SYSNAND VIRTUAL` + Press (A) on `agbsave.bin` to select it + Select "AGBSAVE options..." + Select "Dump GBA VC save" + Press (A) to continue - + Druk op (Start) om je 3DS opnieuw op te starten + + Press (Start) to reboot your device #### Section IV - Copy EmuNAND to SysNAND 1. Launch GodMode9 by holding (Start) during boot -1. Navigeer naar `[E:] EMUNAND VIRTUAL` -1. Druk op (A) op `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)" -1. Druk op (A) om SysNAND overwriting te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven +1. Navigér til `[E:] EMUNAND VIRTUAL` +1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)" +1. Press (A) to unlock SysNAND overwriting, then input the key combo given + This will not overwrite your boot9strap installation -1. Voer de gegeven combinatie van knoppen in om SysNAND (lvl1) writing in te schakelen - + Dit proces zal enige tijd duren +1. Input the key combo given to unlock SysNAND (lvl1) writing + + Denne prosessen vil ta litt tid 1. Once it has completed, press (A) to continue 1. Press (B) to decline relocking write permissions if prompted -1. Druk op (B) om terug te gaan naar het hoofdmenu +1. Press (B) to return to the main menu #### Section V - Restore DSiWare Saves -Als je geen backup DSiWare Saves hebt gemaakt, kan je dit overslaan. +If you did not backup DSiWare Saves earlier, skip this section. {: .notice--info} 1. Navigate to `[0:] SDCARD` -> `gm9` -> `out` -1. Druk op (Y) op de `00030004` map om deze te kopiëren -1. Druk twee keer op (B) om terug te gaan naar het hoofdmenu -1. Navigeer naar `[2:] SYSNAND TWLN` -> `title` -1. Druk op (Y) om de `00030004` map te plakken -1. Selecteer "Copy path(s)" -1. Druk op (A) om SysNAND (lvl1) writing te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven -1. Selecteer "Overwrite file(s)" - + Dit proces kan even duren als je veel DSiWare spellen hebt +1. Press (Y) on the `00030004` folder to copy it +1. Trykk (B) to ganger for å gå tilbake til hovedmenyen +1. Navigér til `[2:] SYSNAND TWLN` -> `title` +1. Press (Y) to paste the `00030004` folder +1. Velg "Copy path(s)" +1. Trykk (A) for å låse opp SysNAND (lvl1) skriving, deretter trykk in den gitte tastekombinasjonen +1. Velg "Overwrite file(s)" + + This process may take some time if you have many DSiWare games 1. Press (B) to decline relocking write permissions if prompted -1. Druk twee keer op (B) om terug te gaan naar het hoofdmenu +1. Trykk (B) to ganger for å gå tilbake til hovedmenyen #### Section VI - Restore GBA VC Saves -Als je geen backup GBA VC Saves hebt gemaakt, kan je dit overslaan. +If you did not backup GBA VC Saves earlier, skip this section. {: .notice--info} To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by holding (R) and pressing (A) on the GodeMode9 main menu, then selecting "Search for titles". {: .notice--info} -1. Houd (R) ingedrukt en druk op (Start) op hetzelfde moment om je 3DS uit te zetten -1. Start je systeem in SysNAND op +1. Hold (R) and press (Start) at the same time to power off your device +1. Power on your device into SysNAND 1. Do the following process for each GBA VC game that you want to restore the save for: - + Start het GBA VC spel - + Sluit het spel af - + Start je 3DS terwijl je (Start) ingedrukt houdt om het Luma3DS chainloader menu te openen - + Open GodMode9 door op (A) te drukken + + Launch the GBA VC game + + Exit the GBA VC game + + Boot your device while holding (Start) to launch the Luma3DS chainloader menu + + Start GodMode9 ved å trykke (A) + Navigate to `[0:] SDCARD` -> `gm9` + Press (Y) on the `.gbavc.sav` file you wish to restore to copy it - + Druk op (B) om terug te gaan naar het hoofdmenu - + Navigeer naar `[S:] SYSNAND VIRTUAL` + + Press (B) to return to the main menu + + Navigér til `[S:] SYSNAND VIRTUAL` + Press (A) on `agbsave.bin` to select it + Select "AGBSAVE options..." + Select "Inject GBA VC save" + Press (A) to continue - + Druk op (Start) om je 3DS opnieuw op te starten - + Start het GBA VC spel - + Sluit het spel af + + Press (Start) to reboot your device + + Launch the GBA VC game + + Exit the GBA VC game 1. Launch GodMode9 by holding (Start) during boot #### Section VII - Backup SysNAND -1. Druk op de (Home) knop om het actiemenu te openen +1. Press (Home) to bring up the action menu 1. Select "Scripts..." 1. Select "GM9Megascript" 1. Select "Backup Options" 1. Select "SysNAND Backup" -1. Druk op (A) om het te bevestigen - + Dit proces zal enige tijd duren +1. Trykk (A) for å bekrefte + + Denne prosessen vil ta litt tid + If you get an error, make sure that you have at least 1.3GB of free space on your SD card -1. Druk op (A) om door te gaan -1. Druk op (B) om terug te gaan naar het hoofdmenu +1. Trykk (A) for å fortsette +1. Press (B) to return to the main menu 1. Select "Exit" 1. Press (A) to relock write permissions if prompted -1. Houd (R) en (B) gelijkertijd ingedrukt om je SD kaart uit te werpen -1. Plaats je SD kaart in je computer +1. Hold (R) og trykk (B) for å løse ut SD-kortet +1. Sett inn SD-kortet i datamaskinen din 1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer - + Maak back-ups in verschillende locaties (zoals een online bestandsopslag) + + Make backups in multiple locations (such as online file storage) + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future 1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it -1. **Maak een backup van elk bestand op je SD kaart naar een map op je computer; alle bestanden zullen verwijderd worden in de volgende stappen** +1. **Sikkerhetskopiér alle filene på SD-kortet til en mappe på datamaskinen, alle filene vil slettes i det neste trinnet** #### Section VIII - Format SD card -1. Stop je SD kaart terug in je 3DS -1. Druk op de (Home) knop om het actiemenu te openen -1. Selecteer "More..." -1. Selecteer "SD format menu" -1. Druk op (A) om te bevestigen -1. Selecteer "NO EmuNAND" -1. Selecteer "Auto" -1. Druk op (A) om het label `GM9SD` te accepteren - + Optioneel kan je een aangepaste naam voor de SD kaart invoeren -1. Wanneer er om gevraagd wordt, voer de gegeven combinatie van knoppen in om te bevestigen -1. Houd (R) en (B) gelijkertijd ingedrukt om je SD kaart uit te werpen -1. Plaats je SD kaart in je computer -1. Kopieer alle bestanden terug naar je SD kaart +1. Sett inn SD-kortet i konsollen igjen +1. Press (Home) to bring up the action menu +1. Velg "More..." +1. Velg "SD format menu" +1. Trykk (A) for å bekrefte +1. Velg "No EmuNAND" +1. Velg "Auto" +1. Press (A) to accept the label `GM9SD` + + Optionally, you may input a custom name for the SD card +1. When prompted, input the key combo given to confirm +1. Hold (R) og trykk (B) for å løse ut SD-kortet +1. Sett inn SD-kortet i datamaskinen din +1. Copy all your files back to your SD card + Ensure you replace the `boot.firm` file on your SD card with the one from your backup -1. Stop je SD kaart terug in je 3DS -1. Druk (A) om je SD kaart te remounten +1. Sett inn SD-kortet i konsollen igjen +1. Trykk (A) for å montere SD-kortet på nytt 1. Press (Start) to reboot -1. Wanneer je een zwart scherm hebt, [volg dan deze foutoplossingshadleiding](troubleshooting#ts_sys_down) +1. + Hvis du får en svart skjerm, [følg denne feilsøkingsveiledningen](troubleshooting#ts_sys_down) ___ diff --git a/_pages/nl_NL/seedminer.txt b/_pages/nl_NL/seedminer.txt index 3566bc89d4..43867dae8d 100644 --- a/_pages/nl_NL/seedminer.txt +++ b/_pages/nl_NL/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/nl_NL/site-navigation.txt b/_pages/nl_NL/site-navigation.txt index 12f073c535..fe409ff3aa 100644 --- a/_pages/nl_NL/site-navigation.txt +++ b/_pages/nl_NL/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [EmuNAND Verplaatsen](move-emunand) + [ntrboot](ntrboot) + [Regio Wijzigen](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) [Probleemoplossing](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/no_NO/ctrtransfer.txt b/_pages/no_NO/ctrtransfer.txt index 92578d8eb6..730ca2df39 100644 --- a/_pages/no_NO/ctrtransfer.txt +++ b/_pages/no_NO/ctrtransfer.txt @@ -2,122 +2,122 @@ title: "CTRTransfer" --- -{% include toc title="Spis Treści" %} +{% include toc title="Table of Contents" %} -### Wymagana Lektura +### Required Reading -To jest dodatkowa sekcja która pomoże Ci w instalacji obrazu 11.5.0 CTRTransfer dla twojego urządzenia. +This is add-on section for installing an 11.5.0 CTRTransfer image to your device. -Aby użyć linków [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) zamieszczonych na tej stronie, będziesz potrzebował klienta torrent takiego jak np. [Deluge](http://dev.deluge-torrent.org/wiki/Download). +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). -Zauważ, że jeżeli będziesz miał pliki inne niż `GodMode9.firm` w folderze `/luma/payloads/` na karcie SD, przytrzymanie (Start), podczas uruchamiania spowoduje wyświetlenie "chainloader menu" w którym będziesz musiał użyć D-Pad'a oraz przycisku (A) aby wybrać "GodMode9" dla tego poradnika. +Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. -MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać. +You MUST have already installed Luma3DS and boot9strap to use this. {: .notice--danger} -### Czego Potrzebujesz +### What You Need -* Najnowszej wersji [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) -* Najnowszej wersji [FBI](https://github.com/Steveice10/FBI/releases/latest) *(pliku `.3dsx`)* -* Obrazu CTRTransfer 11.5.0 dla twojego urządzenia i regionu -*(jeśli twoja konsola nie jest z żadnego z tych regionów, po prostu wybierz dowolny zgodny z typem twojej konsoli)*: - + - [New 3DS lub 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS lub 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS lub 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS lub 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) +* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)* +* The 11.5.0 CTRTransfer image for your device and region +*(Hvis enheten din ikke er fra en av disse regionene, bare velg en som passer til enhetstypen din)*: + + - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) ~ - + - [Old 3DS lub 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [Old 3DS lub 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [Old 3DS lub 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -### Instrukcje +### Instructions -#### Sekcja I - Przygotowanie +#### Section I - Prep Work -1. Wyłącz konsolę -1. Włóż kartę SD do komputera -1. Stwórz folder o nazwie `3ds` w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje -1. Stwórz folder o nazwie `cias` w katalogu głównym karty SD, jeśli jeszcze nie istnieje -1. Skopiuj `GodMode9.firm` z archiwum `.zip` GodMode9 do folderu `/luma/payloads/` na twojej karcie SD -1. Skopiuj folder `gm9` z GodMode9 `.zip` do głównego katalogu karty SD -1. Skopiuj obraz CTRTransfer 11.5.0 `.bin` z CTRTransfer `.zip` do folderu `/gm9/` na karcie SD -1. Skopiuj `FBI.3dsx` do folderu `/3ds/` na karcie SD -1. Włóż ponownie kartę SD do konsoli +1. Slå av enheten +1. Sett inn SD-kortet i datamaskinen din +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Opprett en mappe kalt `cias` på roten av SD-kortet hvis den ikke allerede er der +1. Kopier `GodMode9.firm` fra GodMode9 `.zip` til `/luma/payloads/` på SD-kortet ditt +1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card +1. Copy the 11.5.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/gm9/` folder on your SD card +1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card +1. Sett inn SD-kortet i konsollen igjen -#### Sekcja II - CTRTransfer +#### Section II - CTRTransfer -1. Uruchom GodMode9 poprzez trzymanie przycisku (Start) podczas uruchamiania konsoli -1. Jeśli zostaniesz poproszony o utworzenie kopii zapasowej niezbędnych plików, naciśnij (A) aby to zrobić, po czym naciśnij (A) aby kontynuować po ich skopiowaniu -1. Jeśli zostaniesz poproszony o ustawienie czasu RTC, naciśnij (A) aby to zrobić, następnie ustaw datę i czas, oraz naciśnij (A) aby kontynuować - + Pamiętaj, że, jeśli musiałeś ustawić datę i czas RTC, będziesz musiał ustawić je w Ustawieniach Systemu po skończeniu tego poradniku -1. Przejdź do `[0:] SDCARD` -> `gm9` -1. Wciśnij (A) na pliku CTRTransfer `.bin` aby go wybrać -1. Wybierz "CTRNAND options..." -1. Wybierz "Transfer image to CTRNAND" -1. Jeśli zostaniesz poproszony, wybierz "Transfer to SysNAND" - + Ten monit pokaże się tylko jeśli masz EmuNAND -1. Wciśnij (A), aby odblokować zapis do SysNAND (lvl1), a następnie wprowadź przedstawioną kombinację przycisków - + Ten proces zajmie trochę czasu -1. Gdy transfer się zakończy, wciśnij (A), aby kontynuować -1. Naciśnij (B) aby odmówić `relocking write permissions` jeżeli zostaniesz o to poproszony -1. Wciśnij dwukrotnie (B), aby wrócić do menu głównego -1. Wciśnij (Home), aby przywołać menu akcji -1. Wybierz "Scripts..." -1. Wybierz "GM9Megascript" -1. Wybierz "Scripts from Plailect's Guide" -1. Wybierz "CTRTransfer Ticket Copy" -1. Kiedy zostaniesz poproszony, naciśnij (A) aby kontynuować -1. Naciśnij (A), aby kontynuować -1. Wciśnij (B) aby wrócić do menu głównego -1. Wybierz "Exit" -1. Naciśnij (A), aby ponownie zablokować uprawnienia do zapisu, jeśli zostaniesz o to poproszony -1. Wciśnij (Start), aby zrestartować konsolę -1. Zaktualizuj swoją konsolę wchodząc w System Settings i "Other Settings". Następnie przejedź na sam koniec w prawo i użyj "System Update" - + Aktualizacje podczas używania B9S + Luma (tego co masz) są bezpieczne - + Jeśli przy próbie aktualizacji pojawia się błąd, ustaw swoje DNS (w ustawieniach połączenia internetowego 3DS) na "auto" +1. Launch GodMode9 by holding (Start) during boot +1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed +1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Navigate to `[0:] SDCARD` -> `gm9` +1. Trykk (A) på CTRTransfer `.bin` for å velge den +1. Velg "CTRNAND options..." +1. Velg "Transfer image to CTRNAND" +1. Hvis bedt om, velg "Transfer to SysNAND" + + Meldingen vises bare hvis du har en EmuNAND +1. Trykk (A) for å låse opp SysNAND (lvl1) skriving, deretter trykk in den gitte tastekombinasjonen + + Denne prosessen vil ta litt tid +1. Når overføringen er fullført, trykk (A) for å fortsette +1. Press (B) to decline relocking write permissions if prompted +1. Trykk (B) to ganger for å gå tilbake til hovedmenyen +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Scripts from Plailect's Guide" +1. Select "CTRTransfer Ticket Copy" +1. When prompted, press (A) to proceed +1. Trykk (A) for å fortsette +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Trykk (Start) å restarte enheten +1. Oppdater konsollen ved å gå til Systeminnstillinger, deretter "Other Settings", så helt til høyre og start "System Update" + + Oppdateringer mens du bruker B9S + Luma (det du har) er trygt + + Hvis dette gir deg en feil, sett DNS-innstillingene til "auto" -#### Sekcja III - Uruchamianie FBI +#### Section III - Launching FBI -1. Uruchom aplikację Download Play (ta [ikona]({{ "/images/download-play-icon.png" | absolute_url }}) -1. Naciśnij (L) + (Dół) + (Select) w tym samym momencie aby otworzyć menu Rosalina -1. Wybierz "Miscellaneous options" -1. Wybierz "Switch the hb. title to the current app." -1. Naciśnij (B) aby kontynuować -1. Naciśnij (B) aby powrócić do głównego menu Rosalina -1. Naciśnij (B) aby wyjść z menu Rosalina -1. Naciśnij (Home) a potem zamknij Download Play -1. Uruchom aplikację Download Play -1. Twoja konsola powinna załadować Homebrew Launcher +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Launch the Download Play application +1. Your device should load the Homebrew Launcher -#### Sekcja IV - Ponowna Instalacja Ticketów +#### Section IV - Reinstalling Tickets -Jeżeli skrypt nie znalazł `user tickets` oraz powiedział aby pominąć tą sekcję, pomiń tą sekcję +If script found no user tickets told you to skip this section, then skip this section {: .notice--info} -1. Uruchom FBI z listy Homebrew -1. Przejdź do `SD` -> `cias` -1. Wróć do katalogu SD naciskając (B) -1. Wybierz "gm9" -1. Wybierz "out" -1. Wybierz "ctrtransfer_tickets" -1. Wykonaj następujący proces dla folderu `eshop` lub `unknown`, albo obu - + Przejdź do folderu - + Wybierz "\" - + Wybierz "Install and delete all tickets" - + Czekaj. Przez chwilę system może wydawać się zawieszony. - + Wciśnij (A), aby potwierdzić - + Wciśnij (B), aby odrzucić instalacje ticketów z CDN. -1. Wciśnij (Home), aby wyjść z FBI +1. Launch FBI from the list of homebrew +1. Navigér til `SD` -> `cias` +1. Return to the SD directory with (B) +1. Select "gm9" +1. Select "out" +1. Select "ctrtransfer_tickets" +1. Do the following process for either the `eshop` folder, `unknown` folder, or both + + Navigate to the folder + + Velg "\" + + Select "Install and delete all tickets" + + Wait. Systemet kan virke frossent, bare vent. + + Press (A) to confirm + + Press (B) to decline installing tickets from CDN. +1. Press (Home) to exit FBI -#### Sekcja V - Usuwanie Obrazu CTRTransfer +#### Section V - Remove CTRTransfer image -1. Uruchom GodMode9 poprzez trzymanie przycisku (Start) podczas uruchamiania konsoli -1. Przejdź do `[0:] SDCARD` -> `gm9` -1. Wciśnij (X) na pliku obrazu CTRTransfer `.bin`, aby go usunąć -1. Naciśnij (A) aby potwierdzić -1. Wciśnij (Start), aby zrestartować konsolę +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[0:] SDCARD` -> `gm9` +1. Trykk (A) på CTRTransfer bilde `.bin` for å slette den +1. Trykk (A) for å bekrefte +1. Trykk (Start) å restarte enheten ___ -### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) +### Continue to [Finalizing Setup](finalizing-setup) {: .notice--primary} diff --git a/_pages/no_NO/finalizing-setup.txt b/_pages/no_NO/finalizing-setup.txt index dbac4721e9..d9a890c77a 100644 --- a/_pages/no_NO/finalizing-setup.txt +++ b/_pages/no_NO/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/no_NO/installing-boot9strap-(usm).txt b/_pages/no_NO/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..2c2dd02ad8 --- /dev/null +++ b/_pages/no_NO/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Sett inn SD-kortet i datamaskinen din +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Sett inn SD-kortet i konsollen igjen +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Slå av enheten + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Trykk (Start) for å lagre og starte på nytt + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Sett inn SD-kortet i datamaskinen din +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/no_NO/legacy-methods.txt b/_pages/no_NO/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/no_NO/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/no_NO/seedminer.txt b/_pages/no_NO/seedminer.txt index ec639f1862..29641a4086 100644 --- a/_pages/no_NO/seedminer.txt +++ b/_pages/no_NO/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/no_NO/site-navigation.txt b/_pages/no_NO/site-navigation.txt index 413547ee7b..f020a758bf 100644 --- a/_pages/no_NO/site-navigation.txt +++ b/_pages/no_NO/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Flytt EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region bytte](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Feilsøking](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/pl_PL/finalizing-setup.txt b/_pages/pl_PL/finalizing-setup.txt index 1906a0e71b..221d44b839 100644 --- a/_pages/pl_PL/finalizing-setup.txt +++ b/_pages/pl_PL/finalizing-setup.txt @@ -72,7 +72,7 @@ Jeśli przed rozpoczęciem tego poradnika już miałeś skonfigurowane EmuNAND i 1. Uruchom aplikację "Download Play" (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Naciśnij w tym samym momencie (L) + (Dół) + (Select) aby otworzyć menu Rosalina +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Wybierz "Miscellaneous options" 1. Wybierz "Switch the hb. title to the current app." 1. Naciśnij (B) aby kontynuować diff --git a/_pages/pl_PL/installing-boot9strap-(usm).txt b/_pages/pl_PL/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..973eb75df8 --- /dev/null +++ b/_pages/pl_PL/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### Czego Potrzebujesz + +* Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Sekcja I - Przygotowanie + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Włóż kartę SD do komputera +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Przejdź kolejno do katalogów `Nintendo 3DS` -> `` -> `<32-znakowe-id>` -> `Nintendo DSiWare` na karcie SD + + Twoje `` będzie takie samo jak te użyte przez Ciebie w [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Włóż ponownie kartę SD do konsoli +1. Włącz konsolę +1. Uruchom "System Settings" na twoim urządzeniu +1. Przejdź do `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Wyłącz konsolę + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Sekcja IV - Konfigurowanie Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć: + + **"Show NAND or user string in System Settings"** +1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Uruchom "System Settings" na twoim urządzeniu +1. Przejdź do `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Włóż kartę SD do komputera +1. Przejdź kolejno do katalogów `Nintendo 3DS` -> `` -> `<32-znakowe-id>` -> `Nintendo DSiWare` na karcie SD + + Twoje `` będzie takie samo jak te użyte przez Ciebie w [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pl_PL/legacy-methods.txt b/_pages/pl_PL/legacy-methods.txt new file mode 100644 index 0000000000..a73f9984f5 --- /dev/null +++ b/_pages/pl_PL/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/pl_PL/region-changing.txt b/_pages/pl_PL/region-changing.txt index 3a63dba885..53e79de84f 100644 --- a/_pages/pl_PL/region-changing.txt +++ b/_pages/pl_PL/region-changing.txt @@ -90,7 +90,7 @@ MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać. #### Sekcja III - Uruchamianie FBI 1. Uruchom aplikację Download Play (ta [ikona]({{ "/images/download-play-icon.png" | absolute_url }}) -1. Naciśnij w tym samym momencie (L) + (Dół) + (Select) aby otworzyć menu Rosalina +1. Naciśnij (L) + (Dół) + (Select) w tym samym momencie aby otworzyć menu Rosalina 1. Wybierz "Miscellaneous options" 1. Wybierz "Switch the hb. title to the current app." 1. Naciśnij (B) aby kontynuować diff --git a/_pages/pl_PL/seedminer.txt b/_pages/pl_PL/seedminer.txt index 1abc883d48..50f67685a4 100644 --- a/_pages/pl_PL/seedminer.txt +++ b/_pages/pl_PL/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Metody -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/pl_PL/site-navigation.txt b/_pages/pl_PL/site-navigation.txt index 008d0bbb1d..2af326dd43 100644 --- a/_pages/pl_PL/site-navigation.txt +++ b/_pages/pl_PL/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizowanie Instalacji](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Instalacja boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Instalacja boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Instalacja boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Przenoszenie EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Zmiana Regionu Konsoli](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Rozwiązywanie Problemów](troubleshooting) + [Odinstalowywanie CFW](uninstall-cfw) + [Aktualizowanie B9S](updating-b9s) diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt index 6aa00eedc5..2352adbf0f 100644 --- a/_pages/pt_BR/finalizing-setup.txt +++ b/_pages/pt_BR/finalizing-setup.txt @@ -72,7 +72,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Aperte (L) + (Baixo) + (Select) ao mesmo tempo para abrir o menu do Rosalina +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Selecione "Miscellaneous options" 1. Selecione "Switch the hb. title to the current app." 1. Aperte (B) para continuar diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..92e0639651 --- /dev/null +++ b/_pages/pt_BR/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insira o cartão SD no seu computador +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsira seu cartão SD no seu dispositivo +1. Ligue o seu dispositivo +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Desligue seu dispositivo + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use o botão (A) e os botões direcionais para ativar o seguinte: + + **"Show NAND or user string in System Settings"** +1. Aperte (Start) para salvar e reiniciar + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insira o cartão SD no seu computador +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pt_BR/legacy-methods.txt b/_pages/pt_BR/legacy-methods.txt new file mode 100644 index 0000000000..01e4adce53 --- /dev/null +++ b/_pages/pt_BR/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/pt_BR/seedminer.txt b/_pages/pt_BR/seedminer.txt index 9ab20968c1..84595a7ade 100644 --- a/_pages/pt_BR/seedminer.txt +++ b/_pages/pt_BR/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/pt_BR/site-navigation.txt b/_pages/pt_BR/site-navigation.txt index ccead1e616..27ea37c1eb 100644 --- a/_pages/pt_BR/site-navigation.txt +++ b/_pages/pt_BR/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizando a instalação](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Mover EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Mudança de Região](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Desinstalar o CFW](uninstall-cfw) + [Atualizando B9S](updating-b9s) diff --git a/_pages/pt_PT/finalizing-setup.txt b/_pages/pt_PT/finalizing-setup.txt index 1c714aadb9..73097ef169 100644 --- a/_pages/pt_PT/finalizing-setup.txt +++ b/_pages/pt_PT/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/pt_PT/homebrew-launcher-(pichaxx).txt b/_pages/pt_PT/homebrew-launcher-(pichaxx).txt index 21aeb4419f..2e390d99a1 100644 --- a/_pages/pt_PT/homebrew-launcher-(pichaxx).txt +++ b/_pages/pt_PT/homebrew-launcher-(pichaxx).txt @@ -4,7 +4,7 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} -### Leitura Obrigatória +### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. @@ -41,7 +41,7 @@ If you already have Pokemon Picross, this process will overwrite your game's sav + This `` folder will be another 32 letter/number folder inside the `` folder 1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted -1. Reinsert your SD card into your device +1. Sett inn SD-kortet i konsollen igjen 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher diff --git a/_pages/pt_PT/installing-boot9strap-(usm).txt b/_pages/pt_PT/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..74c5d7400e --- /dev/null +++ b/_pages/pt_PT/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pt_PT/legacy-methods.txt b/_pages/pt_PT/legacy-methods.txt new file mode 100644 index 0000000000..01e4adce53 --- /dev/null +++ b/_pages/pt_PT/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/pt_PT/seedminer.txt b/_pages/pt_PT/seedminer.txt index 343ea82cc3..516d93dd85 100644 --- a/_pages/pt_PT/seedminer.txt +++ b/_pages/pt_PT/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/pt_PT/site-navigation.txt b/_pages/pt_PT/site-navigation.txt index 2592d61ee8..2760ad413a 100644 --- a/_pages/pt_PT/site-navigation.txt +++ b/_pages/pt_PT/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ro_RO/ctrtransfer.txt b/_pages/ro_RO/ctrtransfer.txt index da1a0726cb..d099002134 100644 --- a/_pages/ro_RO/ctrtransfer.txt +++ b/_pages/ro_RO/ctrtransfer.txt @@ -2,122 +2,122 @@ title: "CTRTransfer" --- -{% include toc title="Cuprins" %} +{% include toc title="Table of Contents" %} -### Lectură obligatorie +### Required Reading -Aceasta este o secțiune suplimentară pentru a instala imaginea CTRTransfer 11.5.0 în dispozitivul dumneavoastră. +This is add-on section for installing an 11.5.0 CTRTransfer image to your device. -Pentru a folosi linkurile [magnetice](https://wikipedia.org/wiki/Magnet_URI_scheme) de pe această pagină, veți avea nevoie de un client de torrente ca [Deluge](http://dev.deluge-torrent.org/wiki/Download). +To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). -Țineți cont că dacă aveți alte payload-uri în afară de `GodMode9.firm` în folderul `/luma/payloads/` de pe cardul SD, apăsând (Start) va lansa un "meniu chainloader" în care va trebui să folosiți D-Pad-ul și butonul (A) ca să selectați "GodMode9" pentru aceste instrucțiuni. +Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. -TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi. +You MUST have already installed Luma3DS and boot9strap to use this. {: .notice--danger} -### Ce aveți nevoie +### What You Need -* Cea mai nouă versiune de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) -* Cea mai nouă versiune de [FBI](https://github.com/Steveice10/FBI/releases/) *(fișierul `.3dsx`)* -* Imaginea CTRTransfer 11.5.0 pentru dispozitivul și regiunea dumneavoastră -*(dacă dispozitivul dumneavoastră nu e din una din aceste regiuni, doar alegeți una ce se potrivește cu tipul dumneavoastră de dispozitiv)*: - + - [New 3DS sau 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - * - [New 3DS sau 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - * - [New 3DS sau 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - * - [New 3DS sau 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) +* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)* +* The 11.5.0 CTRTransfer image for your device and region +*(if your device is not from one of these regions, just pick one that matches your device type)*: + + - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) ~ - * - [Old 3DS sau 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - * - [Old 3DS sau 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS sau 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -### Instrucțiuni +### Instructions -#### Secțiunea I - Preparații +#### Section I - Prep Work -1. Închideți dispozitivul -1. Introduceți cardul SD în calculator -1. Creați un folder numit `3ds` în rădăcina cardului SD dacă nu există deja -1. Creați un folder numit `cias` în rădăcina cardului SD dacă nu există deja -1. Copiați `GodMode9.firm` din arhiva `.zip` GodMode9 în folderul `/luma/payloads/` de pe cardul SD -1. Copiați folderul `gm9` din arhiva `.zip` GodMode9 în rădăcina cardului SD -1. Copiați imaginea `.bin` CTRTransfer 11.5.0 din arhiva `.zip` CTRTransfer în folderul `/gm9/` de pe cardul SD -1. Copiați `FBI.3dsx` în folderul `/3ds/` de pe cardul SD -1. Reintroduceți cardul SD în dispozitivul dumneavoastră +1. Power off your device +1. Insert your SD card into your computer +1. Create a folder named `3ds` on the root of your SD card if it does not already exist +1. Create a folder named `cias` on the root of your SD card if it does not already exist +1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card +1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card +1. Copy the 11.5.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/gm9/` folder on your SD card +1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card +1. Reinsert your SD card into your device -#### Secțiunea II - CTRTransfer +#### Section II - CTRTransfer -1. Lansați GodMode9 ținând apăsat (Start) în timpul pornirii -1. Când vi se cere să faceți o copie de rezervă a fișierelor esențiale, apăsați (A) pentru a o realiza, apoi apăsați (A) ca să continuați după ce s-a terminat -1. Dacă vi se cere să reparați dara și ora RTC, apăsați (A) pentru a efectua, apoi setați data și ora, apoi apăsați (A) pentru a continua - + Țineți cont că, dacă trebuiați să reparați data și ora, va trebui să reparați ora în System Settings de asemenea după completarea acestui ghid -1. Navigați spre `[0:] SDCARD` -> `gm9` -1. Apăsați (A) pe CTRTransfer `.bin` pantru a-l selecta -1. Selectați "CTRNAND options..." -1. Selectați "Transfer image to CTRNAND" -1. Dacă apare, selectați "Transfer to SysNAND" - + Această solicitare va apărea doar dacă aveți un EmuNAND -1. Apăsați (A) ca să deblocați scrierea în SysNAND (lvl1), apoi introduceți combinația de butoane care vi se cere - + Acest proces va lua ceva timp -1. Odată ce transferul este complet, apăsați (A) ca să continuați -1. Apăsați (B) ca să refuzați reblocarea permisiunilor de scriere dacă vi se cere -1. Apăsați (B) de două ori ca să vă întoarceți la meniul principal -1. Apăsați (Home) pentru a arăta meniul de acțiuni -1. Selectați "Scripts..." -1. Selectaţi "GM9Megascript" -1. Selectaţi "Scripts from Plailect's Guide" -1. Selectați "CTRTransfer Ticket Copy" -1. Când vi se solicită, apăsaţi (A) pentru a continua -1. Apăsați (A) pentru a continua -1. Apăsați (B) ca să vă întoarceți în meniul principal -1. Selectaţi "Exit" -1. Apăsați (A) ca să reblocați permisiunile de scriere dacă vi se cere -1. Apăsați (Start) pentru a reporni dispozitivul -1. Actualizați dispozitivul mergând în System Settings, apoi "Other Settings", apoi mergeți spre colțul drept și folosiți "System Update" - + Actualizările în timp ce folosiți B9S + Luma (ce aveți) sunt sigure - + Dacă aceasta vă dă o eroare, setați setările de DNS pe "auto" +1. Launch GodMode9 by holding (Start) during boot +1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed +1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Navigate to `[0:] SDCARD` -> `gm9` +1. Press (A) on the CTRTransfer `.bin` to select it +1. Select "CTRNAND options..." +1. Select "Transfer image to CTRNAND" +1. If prompted, select "Transfer to SysNAND" + + This prompt will only appear if you have an EmuNAND +1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given + + This process will take some time +1. Once the transfer has completed, press (A) to continue +1. Press (B) to decline relocking write permissions if prompted +1. Press (B) twice to return to the main menu +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Scripts from Plailect's Guide" +1. Select "CTRTransfer Ticket Copy" +1. When prompted, press (A) to proceed +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Press (Start) to reboot your device +1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" + + Updates while using B9S + Luma (what you have) are safe + + If this gives you an error, set your DNS settings to "auto" -#### Secțiunea III - Lansând FBI +#### Section III - Launching FBI -1. Lansați aplicaţia Download Play (această [iconiță]({{"/images/download-play-icon.png" | absolute_url}}) -1. Apăsați (L) + (Jos) + (Select) în același timp ca să deschideți meniul Rosalina -1. Selectați "Miscellaneous options" -1. Selectați "Switch the hb. title to the current app" -1. Apăsați (B) pentru a continua -1. Apăsați (B) ca să vă întoarceți la meniul principal Rosalina -1. Apăsați (B) pentru a ieși din meniul Rosalina -1. Apăsați (Home), apoi închideți Download Play -1. Lansați aplicația Download Play -1. Dispozitivul dumneavoastră ar trebui să încarce Hombrew Launcher-ul +1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) +1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Launch the Download Play application +1. Your device should load the Homebrew Launcher -#### Secțiunea IV - Reinstalând ticket-ele +#### Section IV - Reinstalling Tickets -În cazul în care scriptul care nu a găsit tichete de utilizator v-a zis să săriți peste această secțiune, atunci faceți cum vi se cere +If script found no user tickets told you to skip this section, then skip this section {: .notice--info} -1. Lansați FBI din lista de homebrew -1. Navigați spre `SD` -> `cias` -1. Întoarceți-vă înapoi în directorul SD cu (B) -1. Selectați "gm9" -1. Selectați "out" -1. Selectaţi "ctrtransfer_tickets" -1. Faceți următorul proces fie pentru folderul `eshop`, `unknown`, sau ambele - + Navigați spre folder - + Selectați "\" - + Selectați "Install and delete all tickets" - + Așteptați. Sistemul poate părea înghețat, doar dați-i timp. - + Apăsați (A) pentru a confirma - + Apăsați (B) pentru a refuza instalarea tichetelor din CDN. -1. Apăsați (Home) pentru a ieși din FBI +1. Launch FBI from the list of homebrew +1. Navigate to `SD` -> `cias` +1. Return to the SD directory with (B) +1. Select "gm9" +1. Select "out" +1. Select "ctrtransfer_tickets" +1. Do the following process for either the `eshop` folder, `unknown` folder, or both + + Navigate to the folder + + Select "\" + + Select "Install and delete all tickets" + + Wait. The system may appear to freeze, just give it time. + + Press (A) to confirm + + Press (B) to decline installing tickets from CDN. +1. Press (Home) to exit FBI -#### Secțiunea V - Eliminarea imaginii CTRTransfer +#### Section V - Remove CTRTransfer image -1. Lansați GodMode9 ținând apăsat (Start) în timpul pornirii -1. Navigați spre `[0:] SDCARD` -> `gm9` -1. Apăsați (X) pe imaginea`.bin` CTRTransfer pentru a o șterge -1. Apăsați (A) pentru a confirma -1. Apăsați (Start) pentru a reporni dispozitivul +1. Launch GodMode9 by holding (Start) during boot +1. Navigate to `[0:] SDCARD` -> `gm9` +1. Press (X) on the CTRTransfer image `.bin` to delete it +1. Press (A) to confirm +1. Press (Start) to reboot your device ___ -### Continuați la [Finalizând instalarea](finalizing-setup) +### Continue to [Finalizing Setup](finalizing-setup) {: .notice--primary} diff --git a/_pages/ro_RO/finalizing-setup.txt b/_pages/ro_RO/finalizing-setup.txt index e193edde4f..a3616df6e2 100644 --- a/_pages/ro_RO/finalizing-setup.txt +++ b/_pages/ro_RO/finalizing-setup.txt @@ -72,7 +72,7 @@ Dacă, înainte să urmăriți acest ghid, aveați deja o configurare cu EmuNAND 1. Lansați aplicația Download Play (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Așteptați până când vedeți două butoane -1. Apăsați (L) + (Jos) + (Select) în același timp ca să deschideți meniul Rosalina +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Selectați "Miscellaneous options" 1. Selectați "Switch the hb. title to the current app" 1. Apăsați (B) pentru a continua diff --git a/_pages/ro_RO/installing-boot9strap-(soundhax).txt b/_pages/ro_RO/installing-boot9strap-(soundhax).txt index 91de029e7e..8c903ad4fd 100644 --- a/_pages/ro_RO/installing-boot9strap-(soundhax).txt +++ b/_pages/ro_RO/installing-boot9strap-(soundhax).txt @@ -1,83 +1,83 @@ --- -title: "Instalar boot9strap (Soundhax)" +title: "Instalând boot9strap (Soundhax)" --- -{% include toc title="Tabla de contenidos" %} +{% include toc title="Cuprins" %} -### Lectura requerida +### Lectură obligatorie Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. {% capture notice-1 %} -Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los elementos claves de la versión, como la Configuración de la consola, el menú HOME, etc. las actualizaciones por cartucho no afectarán a Nintendo 3DS Sound ni a funcionalidades en línea, como la Transferencia de Sistema, el Navegador de internet, la Plaza Mii o la eShop. +Țineți cont că actualizările cu cardul vor aduce actualizări numai funcțiilor de bază, cum ar fi System Settings, Meniul HOME, etc. actualizările cu cardul de joc nu vor aduce actualizări la Nintendo 3DS Sound și serviciilor de rețea, cum ar fi System Transfer, Internet Browser, StreetPass Mii Plaza, sau eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! ¡Necesitarás un método alternativo para entrar al Homebrew Launcher como [Instalar boot9strap (navegador)](installing-boot9strap-(browser)) o [Instalar boot9strap (MSET)](installing-boot9strap-(mset))! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Veţi avea nevoie de o metodă alternativă de a intra în Homebrew Launcher cum ar fi [Instalând boot9strap (Browser)](installing-boot9strap-(browser)) sau [Instalând boot9strap (MSET)](installing-boot9strap-(mset))! {% endcapture %}
{{ notice-1 | markdownify }}
-### Qué necesitas +### Ce aveți nevoie -* La última versión de [Soundhax](http://soundhax.com) *(correspondiente a tu consola, región y versión)* -* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La última versión [del Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La última versión de [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(el archivo `.bin` correspondiente a tu versión de firmware)* +* Ultima versiune de [Soundhax](http://soundhax.com) *(pentru dispozitivul, versiunea și regiunea dumneavoastră)* +* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* +* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) +* Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* Cea mai recentă versiune de [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(fișierul `.bin` care corespunde versiunii de firmware)* -### Instrucciones +### Instrucțiuni -#### Sección I - Preparativos +#### Secțiunea I - Preparații -1. Apaga tu consola -1. Inserta tu tarjeta SD en tu computadora -1. Copia el archivo `.m4a` de Soundhax a la raíz de tu tarjeta SD -1. Copia el pre9otherapp payload a la raíz de tu tarjeta SD y cambia su nombre a `otherapp.bin` -1. Copia el archivo `boot.firm` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD -1. Copia `boot.3dsx` a la raíz de tu tarjeta SD -1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD -1. Copia `arm9.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD -1. Vuelve a insertar tu tarjeta SD en tu consola -1. Enciende tu consola +1. Închideți dispozitivul +1. Introduceți cardul SD în calculator +1. Copiați fișierul Soundhax `.m4a` în rădăcina cardului SD +1. Copiați payload-ul pre9otherapp în rădăcina cardului SD și redenumiți-l în`otherapp.bin` +1. Copiați `boot.firm` de la Luma3DS `.zip` pe rădăcina cardului SD +1. Copiați `boot.3dsx` în rădăcina cardului SD +1. Creați un folder numit 'boot9strap' pe rădăcina cardului SD +1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD +1. Copiați `arm.bin` de pe arhiva `zip` SafeB9SInstaller în rădăcina cardului SD +1. Reintroduceți cardul SD în dispozitivul dumneavoastră +1. Porniți dispozitivul -#### Sección II - Ejecutar SafeB9SInstaller +#### Secțiunea II - Lansând SafeB9SInstaller -1. Vuelve a insertar tu tarjeta SD en tu consola -1. Enciende tu consola -1. Inicia Nintendo 3DS Sound +1. Reintroduceți cardul SD în dispozitivul dumneavoastră +1. Porniți dispozitivul +1. Lansați Nintendo 3DS Sound ![]({{ "/images/screenshots/soundhax-welcome.png" | absolute_url }}) {: .notice--info} -1. Si nunca has iniciado la aplicación Nintendo 3DS Sound antes y aparecen consejos sobre cómo usarla dados por un pájaro, lee todos los consejos de éste, luego cierra la aplicación y vuelve a abrirla - + En esta situación, ejecutar Soundhax inmediatamente causaría que los consejos aparezcan cada vez que se inicie la aplicación hasta realizar lo descrito anteriormente -1. Ve a `/SDCARD`, y luego reproduce "<3 nedwill 2016" - + Esto podría tomar varios intentos - + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar +1. Daca nu ați deschis nicioadată Nintendo 3DS Sound înainte și primiți sfaturi de la o iconiță cu o pasăre, citiți toate sfaturile păsării, apoi închideți aplicația în mod normal şi redeschideți-o + + În această situație, pornind Soundhax imediat ar face ca aceste sfaturi să apăra de fiecare dată când porniți Nintendo 3DS Sound până când faceți ce vi se cere +1. Mergeți în `/SDCARD`, apoi apăsați "<3 nedwill 2016" + + S-ar putea să fie nevoie să încercați de mai multe ori + + Dacă se blochează, închideți dispozitivul forțat ținând apăsat butonul de pornire și încercați din nou ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} -1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller +1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller -#### Sección III - Instalar boot9strap +#### Secțiunea III - Instalând boot9strap -1. Espera a que todos los controles de seguridad se completen -1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap -1. Una vez se haya completado, presiona (A) para reiniciar tu consola +1. Așteptaţi ca toate verificările de siguranță să fie completate +1. Când vi se solicită, introduceți combinația de butoane ca să instalați boot9strap +1. Odată terminat, apăsați (A) pentru a reporni dispozitivul -#### Sección IV - Configurar Luma3DS +#### Secțiunea IV - Configurând Luma3DS -1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS - + Si la pantalla se queda en negro, [sigue la guía de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: +1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS + + Dacă vedeți un ecran negru [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: + **"Show NAND or user string in System Settings"** -1. Presiona (Start) para guardar y reiniciar - + Si te da error, tan solo continúa en la siguiente página +1. Apăsați (Start) pentru a salva și reporni + + Dacă primiţi o eroare, doar continuați spre pagina următoare ___ -### Continúa en [Finalizar instalación](finalizing-setup) +### Continuați la [Finalizând instalarea](finalizing-setup) {: .notice--primary} diff --git a/_pages/ro_RO/installing-boot9strap-(usm).txt b/_pages/ro_RO/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..eaa7c38aa3 --- /dev/null +++ b/_pages/ro_RO/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japonia și Coreea, indicate de literele U, E, J, sau K după versiunea de sistem. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### Ce aveți nevoie + +* Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer) +* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Secțiunea I - Preparații + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Încărcați fișierul movable.sed folosind opțiunea "Choose File" +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. Dacă dispozitivul este pornit, închideți-l +1. Introduceți cardul SD în calculator +1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigați spre `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` pe cardul SD + + Acest `` va fi la fel ca cel care l-ați folosit în [Seedminer](seedminer) + + Dacă `Nintendo DSiWare` nu există, creați-l +1. Dacă există orice fișier de copie de rezervă DSiWare (`<8-character-id>.bin`) în acest folder, mutați-l în calculator + + Acesta vă va lăsa cu un folder gol de Nintendo DSiWare. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reintroduceți cardul SD în dispozitivul dumneavoastră +1. Porniți dispozitivul +1. Porniți System Settings pe consolă +1. Navigați spre `Data Management` -> `DSiWare` +1. Faceți click pe secțiunea SD Card + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Închideți dispozitivul + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Secțiunea IV - Configurând Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: + + **"Show NAND or user string in System Settings"** +1. Apăsați (Start) pentru a salva și reporni + + Dispozitivul ar trebui să încarce meniul HOME după o scurtă vreme. Dacă vedeți un ecran negru mai mult de 5 secunde, [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Porniți System Settings pe consolă +1. Navigați spre `Data Management` -> `DSiWare` +1. Faceți click pe secțiunea SD Card + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Introduceți cardul SD în calculator +1. Navigați spre `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` pe cardul SD + + Acest `` va fi la fel ca cel care l-ați folosit în [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continuați la [Finalizând instalarea](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ro_RO/legacy-methods.txt b/_pages/ro_RO/legacy-methods.txt new file mode 100644 index 0000000000..c844ab64db --- /dev/null +++ b/_pages/ro_RO/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/ro_RO/seedminer.txt b/_pages/ro_RO/seedminer.txt index 9fce872e4e..35f271c81e 100644 --- a/_pages/ro_RO/seedminer.txt +++ b/_pages/ro_RO/seedminer.txt @@ -75,29 +75,20 @@ Există două metode diferite care se bazează pe exploit-ul Seedminer (descris + Păstrați acest fișier de vreme ce veți avea nevoie de el în următoarele pagini ___ -### Metode -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -Această metodă de a folosi Seedminer pentru mai multă exploatare utilizează fişierul `movable.sed` pentru a decripta orice titlu de DSiWare cu scopul de a injecta un titlu DSiWare exploatabil în aplicaţia DS Internet Settings. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. Această metodă este compatibilă cu toate regiunile, deși regiunea CHN nu este acoperită de acest ghid. -Această metodă necesită ca DS Internet Settings să funcţioneze în mod corespunzător (vedeți testul de pe partea superioară a acestei pagini). - -Continuați la [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -Această metodă de a folosi Seedminer pentru mai multă exploatare utilizează fişierul `movable.sed` pentru a avea acces la Homebrew Launcher folosind exploit-ul PicHaxx pentru a descărca un titlu DSiWare de sistem. Această metodă are nevoie ca dumneavoastră să dețineți (sau să descărcați) jocul gratuit "Pokemon Picross" de pe eShop. - -Această metodă este compatibilă numai cu regiunile EUR, JPN şi SUA, şi este ceva mai complicat decât metoda de mai sus. Este recomandat să folosiți această metodă doar dacă nu aveți o aplicație DS Internet Settings funcțională. - -Continuați la [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/ro_RO/site-navigation.txt b/_pages/ro_RO/site-navigation.txt index 0d5d2792ca..43fae0f8d1 100644 --- a/_pages/ro_RO/site-navigation.txt +++ b/_pages/ro_RO/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizând instalarea](finalizing-setup) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Instalând boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Instalând boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Instalând boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Instalând boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Mutare EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Schimb de regiune](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Depanare](troubleshooting) + [Dezinstalând CFW](uninstall-cfw) + [Actualizând B9S](updating-b9s) diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt index 03e30fed1d..ff6abb1b2f 100644 --- a/_pages/ru_RU/finalizing-setup.txt +++ b/_pages/ru_RU/finalizing-setup.txt @@ -72,7 +72,7 @@ title: "Завершение установки" 1. Запустите приложение Загружаемая игра (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Дождитесь появления двух кнопок -1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Выберите "Miscellaneous options" 1. Выберите "Switch the hb. title to the current app." 1. Нажмите (B), чтобы продолжить diff --git a/_pages/ru_RU/flashing-ntrboot-(dsi).txt b/_pages/ru_RU/flashing-ntrboot-(dsi).txt index 2c3d01a324..8ecbbd9a64 100644 --- a/_pages/ru_RU/flashing-ntrboot-(dsi).txt +++ b/_pages/ru_RU/flashing-ntrboot-(dsi).txt @@ -1,48 +1,48 @@ --- -title: "Flashing ntrboot (DSi)" +title: "Прошивка ntrboot (DSi)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Содержание" %} -### Required Reading +### Обязательно к прочтению -Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) +Прежде чем продолжить, убедитесь что вы прочитали всю информацию на странице [ntrboot](ntrboot) -This method requires temporary access to a Nintendo DSi that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your DSi. This means that your flashcart must support launching `.nds` files on your DSi's version. See the flashcart table on [ntrboot](ntrboot) for more information. +Этот метод требует временного доступа к Nintendo DSi, совместимой с вашим флешкартриджем. Для запуска `.nds-файла` флешера ntrboot на вашей DSi в этом методе используется флешкартридж. Ваш флешкартридж должен быть способен запускать `.nds-файлы` на вашей DSi. Смотрите таблицу флешкартриджей на странице [ntrboot](ntrboot) для получения дополнительной информации. -Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +Обратите внимание, что в некоторых редких случаях процесс прошивки может **брикнуть** поддельный флешкартридж и навсегда сделать его нерабочим. Это маловероятно, но тем не менее поддерживаются только оригинальные флешкартриджи из списка. Чтобы уменьшить вероятность получения поддельного картриджа, рекомендуется использовать проверенный сайт для покупки флешкартриджа (например [NDS Card](http://www.nds-card.net/)) {: .notice--danger} -### What You Need +### Что понадобится -* Your ntrboot compatible flashcart -* Two devices - + **The source DSi**: the Nintendo DSi which is compatible with your flashcart - + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) *(`dsi` flasher; not the standard flasher)* +* Флешкартридж, совместимый с ntrboot +* Две консоли + + **Исходная DSi**: Nintendo DSi, совместимая с вашим флешкартриджем + + **Целевая 3DS**: консоль семейства 3DS с официальной прошивкой +* Свежая версия [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) *(`dsi` версия; стандартная версия не подходит)* -### Instructions +### Инструкция -#### Section I - Prep Work +#### Часть I - Подготовительные работы -1. Power off **the source DSi** -1. Insert your flashcart's SD card into your computer -1. Copy `ds_ntrboot_flasher_dsi.nds` to your flashcart's SD card -1. Reinsert your flashcart's SD card back into your flashcart -1. Insert your ntrboot compatible DS / DSi flashcart into **the source DSi** +1. Выключите **исходную DSi** +1. Вставьте SD-карту флешкартриджа в компьютер +1. Скопируйте `ds_ntrboot_flasher_dsi.nd` на SD-карту флешкартриджа +1. Вставьте SD-карту флешкартриджа обратно во флешкартридж +1. Вставьте ваш DS / DSi флешкартридж, совместимый с ntrboot, в **исходную DSi** -#### Section II - Flashing ntrboot +#### Часть II - Прошивка ntrboot -1. Launch `ds_ntrboot_flasher_dsi.nds` on **the source DSi** using your flashcart -1. Press (A) to continue -1. Use (Up) and (Down) to select your flashcart -1. Press (A) to continue -1. Press (A) to "inject ntrboothax" -1. Press (A) to select "RETAIL" -1. Press (A) to continue -1. Select "EXIT" +1. Запустите `ds_ntrboot_flasher_dsi.nds` на **исходной DSi**, используя флешкартридж +1. Нажмите (A), чтобы продолжить +1. Используйте (Вверх) и (Вниз) чтобы выбрать ваш флешкартридж +1. Нажмите (A), чтобы продолжить +1. Нажмите (A), чтобы выбрать "inject ntrboothax" +1. Нажмите (A), чтобы выбрать "RETAIL" +1. Нажмите (A), чтобы продолжить +1. Выберите "EXIT" ___ -### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +### Следующий шаг: [Установка boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) {: .notice--primary} diff --git a/_pages/ru_RU/installing-boot9strap-(usm).txt b/_pages/ru_RU/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..bc89b54ff9 --- /dev/null +++ b/_pages/ru_RU/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +Эти инструкции работают на консолях регионов USA, Europe, Japan и Korea. На регион консоли указывает буква U, E, J или K после версии прошивки. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### Что понадобится + +* Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) +* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Часть I - Подготовительные работы + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Загрузите свой movable.sed, используя опцию "Выберите файл" +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. Если консоль включена, выключите консоль +1. Вставьте SD-карту в компьютер +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Перейдите в папку `Nintendo 3DS` -> `` -> `<32-значный-id>` -> `Nintendo DSiWare` на SD-карте + + `` будет таким же, как и на странице [Seedminer](seedminer) + + Если папка `Nintendo DSiWare` не существует, создайте ее +1. Если в этой папке уже есть файлы бэкапа DSiWare (`<8-значный-id>.bin`), переместите их на компьютер + + На этом шаге папка Nintendo DSiWare должна быть пустой. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Вставьте SD-карту обратно в консоль +1. Включите консоль +1. Откройте Системные настройки на вашей консоли +1. Перейдите в `Управление данными` -> `DSiWare` +1. Перейдите в раздел Карта microSD + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Выключите консоль + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Часть IV - Настройка Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Нажимая (A) выберите следующие пункты: + + **"Show NAND or user string in System Settings"** +1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + + После короткой задержки консоль должна загрузить меню HOME. Если экран остаётся чёрным дольше 5 минут, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Откройте Системные настройки на вашей консоли +1. Перейдите в `Управление данными` -> `DSiWare` +1. Перейдите в раздел Карта microSD + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Вставьте SD-карту в компьютер +1. Перейдите в папку `Nintendo 3DS` -> `` -> `<32-значный-id>` -> `Nintendo DSiWare` на SD-карте + + `` будет таким же, как и на странице [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Следующий шаг: [Завершение установки](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ru_RU/legacy-methods.txt b/_pages/ru_RU/legacy-methods.txt new file mode 100644 index 0000000000..dc5258d2f7 --- /dev/null +++ b/_pages/ru_RU/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/ru_RU/seedminer.txt b/_pages/ru_RU/seedminer.txt index f9c416e8e7..11075a4619 100644 --- a/_pages/ru_RU/seedminer.txt +++ b/_pages/ru_RU/seedminer.txt @@ -75,29 +75,20 @@ title: "Seedminer" + Сохраните этот файл, так как он понадобится вам на следующих страницах ___ -### Методы -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для расшифровки любого тайтла DSiWare в целях инъекции уязвимого тайтла DSiWare в приложение DS Internet Settings. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. Этот метод совместим со всеми регионами, но в этом руководстве не рассматривается регион CHN. -Этот метод требует работоспособности приложения DS Internet Settings (см. тест в верхней части этой страницы). - -Следующий шаг: [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для получения доступа к Homebrew Launcher при помощи эксплойта PicHaxx в целях создания дампа системного DSiWare. Этот метод требует, чтобы у вас уже была в наличии (или загружена) бесплатная игра "Pokemon Picross" из eShop. - -Этот метод совместим только с регионами EUR, JPN и USA, а также несколько сложнее, чем метод выше. Этот метод рекомендуется использовать только в том случае, если у вас нет работоспособного приложения DS Internet Settings. - -Следующий шаг: [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/ru_RU/site-navigation.txt b/_pages/ru_RU/site-navigation.txt index 501d37c647..57a6b58f20 100644 --- a/_pages/ru_RU/site-navigation.txt +++ b/_pages/ru_RU/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Завершение установки](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Установка boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Установка boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Установка boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Установка boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Перенос EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Смена региона](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Проблемы и их решения](troubleshooting) + [Удаление кастомной прошивки](uninstall-cfw) + [Обновление B9S](updating-b9s) diff --git a/_pages/sr_SP/finalizing-setup.txt b/_pages/sr_SP/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/sr_SP/finalizing-setup.txt +++ b/_pages/sr_SP/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/sr_SP/installing-boot9strap-(fredtool).txt b/_pages/sr_SP/installing-boot9strap-(fredtool).txt index 46eedbe264..b0dac4995e 100644 --- a/_pages/sr_SP/installing-boot9strap-(fredtool).txt +++ b/_pages/sr_SP/installing-boot9strap-(fredtool).txt @@ -1,102 +1,102 @@ --- -title: "Installing Boot9strap (Fredtool)" +title: "Установка Boot9strap (Fredtool)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Содержание" %} -### Required Reading +### Обязательно к прочтению -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. +Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для расшифровки любого тайтла DSiWare в целях инъекции уязвимого тайтла DSiWare в приложение DS Internet Settings. Этот метод требует наличия бэкапа DSiWare, полученного с помощью BannerBomb или DSiWare Dumper. -This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). +Это рабочая реализация эксплойта "FIRM partitions known-plaintext". Подробнее о нем [здесь](https://www.3dbrew.org/wiki/3DS_System_Flaws) (англ.). -### What You Need +### Что понадобится -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) -* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* Бэкап DSiWare (находящийся в корне SD-карты и полученный с помощью [BannerBomb3](bannerbomb3) или [DSiWare Dumper](dsidumper)) +* Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) +* Свежая версия [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) +* Свежая версия [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) +* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -#### Section I - Prep Work +#### Часть I - Подготовительные работы -1. Power off your device -1. Insert your SD card into your computer +1. Выключите консоль +1. Вставьте SD-карту в компьютер 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) to the root of your SD card -1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card +1. Скопируйте `boot.nds` (B9STool) в корень SD-карты +1. Скопируйте папку `private` из `.zip-архива` Frogminer_save в корень SD-карты -#### Section II - Fredtool +#### Часть II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer -1. Select your `movable.sed` file for the "Your movable.sed" field -1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field -1. Complete the "I'm not a robot" captcha -1. Select "Start" -1. Wait for the process to complete -1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) -1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder -1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder -1. Reinsert your SD card into your device -1. Power on your device -1. Launch System Settings on your device -1. Navigate to `Data Management` -> `DSiWare` -1. Under the "SD Card" section, select the "Haxxxxxxxxx!" title -1. Select "Copy", then select "OK" -1. Return to main menu of the System Settings -1. Navigate to `Internet Settings` -> `Nintendo DS Connections`, then select "OK" -1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio +1. Перейдите по ссылке [Fredtool](https://fredtool.bruteforcemovable.com/) на компьютере +1. Выберите свой файл `movable.sed` в поле "Your movable.sed" +1. Выберите свой бэкап DSiWare (`<8-значный-id>.bin`) в поле "Your dsiware.bin" +1. Заполните captcha "Я не робот" +1. Нажмите "Start" +1. Дождитесь окончания процесса +1. После окончания процесса скачайте с сайта свой модифицированный архив DSiWare + + Этот архив содержит 2 бэкапа dsiware, clean (не модифицированный) и hax (содержащий эксплойт) +1. Перейдите в папку `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` на SD-карте + + `` будет таким же, как и на странице [Seedminer](seedminer) + + `` будет другой папкой с именем из 32 символов внутри папки `` + + Если папка `Nintendo DSiWare` не существует, создайте ее внутри папки `` +1. Скопируйте файл `42383841.bin` из папки `output/hax/` внутри скачанного архива DSiWare (`fredtool_output.zip`) в папку `Nintendo DSiWare` +1. Вставьте SD-карту обратно в консоль +1. Включите консоль +1. Откройте Системные настройки на вашей консоли +1. Перейдите в `Управление данными` -> `DSiWare` +1. На вкладке "Карта SD" выберите тайтл "Haxxxxxxxxx!" +1. Выберите "Копировать", затем "OK" +1. Вернитесь в главное меню Системных настроек +1. Перейдите в `Интернет-настройки` -> `Подключения Nintendo DS`, затем нажмите "OK" +1. Если эксплойт сработал корректно, запустится японская версия Flipnote Studio -#### Section III - Flipnote Exploit +#### Часть III - Эксплойт Flipnote -If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/). +Если вы предпочитаете визуальное руководство вместо этой части, оно доступно [здесь](https://zoogie.github.io/web/flipnote_directions/). {: .notice--info} -1. Complete the initial setup process for the launched game until you reach the main menu - + Select the left option whenever prompted during the setup process -1. Using the touch-screen, select the large left box, then select the box with an SD card icon -1. Once the menu loads, select the face icon, then the bottom right icon to continue -1. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen -1. Select the second button along the top with a film-reel icon -1. Scroll right until reel "3/3" is selected -1. Tap the third box with the letter "A" in it -1. Scroll left until reel "1/3" is selected -1. Tap the fourth box with the letter "A" in it -1. If the exploit was successful, your device will have loaded b9sTool -1. Using the D-Pad, move to "Install boot9strap" - + If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open Nintendo DS Connections and start over from the beginning of Section III -1. Press (A), then press START and SELECT at the same time to begin the process -1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device - + You may have to force power off by holding the power button - + If you see the Luma Configuration screen, continue with the guide without powering off +1. Пройдите процесс первоначальной настройки в запущенной игре, пока не попадете в главное меню + + Выберите опцию слева при появлении запроса во время процесса настройки +1. С помощью сенсорного экрана нажмите на большой значок слева, затем на значок с SD-картой +1. После того, как загрузится меню, нажмите на значок с лицом, а затем на кнопку справа внизу, чтобы продолжить +1. Нажмите (X) или (Вверх) в зависимости от того, какая из кнопок отображается на верхнем экране +1. Нажмите на вторую кнопку в верхнем ряду со значком кинопленки +1. Прокрутите вправо, чтобы выбрать кадр "3/3" +1. Нажмите на третий значок с буквой "A" +1. Прокрутите влево, чтобы выбрать кадр "1/3" +1. Нажмите на четвертый значок с буквой "A" +1. Если эксплойт сработал корректно, запустится b9sTool +1. Используя крестовину, выберите "Install boot9strap" + + Если вы пропустили этот шаг, консоль выйдет в меню HOME вместо установки boot9strap и вам придется открыть Подключения Nintendo DS и начать с начала Части III +1. Нажмите (A), затем нажмите START и SELECT одновременно, чтобы начать процесс +1. После завершения процесса и появления на нижнем экране надписи "done.", выйдите из b9sTool, затем выключите консоль + + При необходимости выключите консоль принудительно, удерживая кнопку питания + + Если вы видите меню настроек Luma, продолжайте выполнять инструкции, не выключая консоль -#### Section IV - Configuring Luma3DS +#### Часть IV - Настройка Luma3DS -1. Boot your device while holding (Select) to launch the Luma configuration menu - + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) -1. Use the (A) button and the D-Pad to turn on the following: +1. Включите консоль кнопкой питания, держа нажатой кнопку (Select), чтобы попасть в меню настроек Luma + + Если вы не можете попасть в меню настроек Luma, [следуйте этим инструкциям](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) (англ.) +1. Нажимая (A) выберите следующие пункты: + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + + После короткой задержки консоль должна загрузить меню HOME. Если экран остаётся чёрным дольше 5 минут, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap) -#### Section V - Restoring DS Connection Settings +#### Часть V - Восстановление DS Connection Settings -1. Power off your device -1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card - + Replace the existing `42383841.bin` file -1. Reinsert your SD card into your device -1. Power on your device -1. Launch System Settings on your device -1. Navigate to `Data Management` -> `DSiWare` -1. Under the "SD Card" section, select the "Nintendo DSi™" title -1. Select "Copy", then select "OK" +1. Выключите консоль +1. Вставьте SD-карту в компьютер +1. Скопируйте файл `42383841.bin` из папки `output/clean/` внутри скачанного архива DSiWare (`fredtool_output.zip`) в папку `Nintendo 3DS//<32-значный-id>/Nintendo DSiWare/` на SD-карте + + Замените существующий файл `42383841.bin` +1. Вставьте SD-карту обратно в консоль +1. Включите консоль +1. Откройте Системные настройки на вашей консоли +1. Перейдите в `Управление данными` -> `DSiWare` +1. На вкладке "Карта SD" выберите тайтл "Nintendo DSi™" +1. Выберите "Копировать", затем "OK" ___ -### Continue to [Finalizing Setup](finalizing-setup) +### Следующий шаг: [Завершение установки](finalizing-setup) {: .notice--primary} diff --git a/_pages/sr_SP/installing-boot9strap-(usm).txt b/_pages/sr_SP/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/sr_SP/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/sr_SP/legacy-methods.txt b/_pages/sr_SP/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/sr_SP/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/sr_SP/privacy-policy.txt b/_pages/sr_SP/privacy-policy.txt index c36506539b..7965e9f207 100644 --- a/_pages/sr_SP/privacy-policy.txt +++ b/_pages/sr_SP/privacy-policy.txt @@ -1,30 +1,30 @@ --- -title: "Privacy Policy" # +title: "Политика конфиденциальности" # layout: single-no-ads --- ### Cookies -This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily. +Этот сайт использует cookies для содействия в направлении пользователей через инструкции руководства. Cookies позволяют боковой панели страницы отображать текущий прогресс в руководстве, чтобы упростить навигацию между инструкциями для пользователей. -### Embedded Content From Other Websites +### Встроенное содержимое с других сайтов -This site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves as if the user has visited the other website. +Этот сайт может включать встроенное содержимое (например видео, изображения, статьи и т.д.). Встроенное содержимое с других сайтов ведет себя так, как если бы пользователь посетил другой сайт. -These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website. +Эти веб-сайты могут собирать данные о вас, использовать cookies, встраивать дополнительные сторонние средства отслеживания и следить за вашим взаимодействием со встроенным контентом, включая отслеживание вашего взаимодействия со встроенным контентом, если у вас есть учетная запись и вы вошли на этот сайт. -### Analytics +### Аналитика -This site uses Google Analytics to monitor and analyze traffic. This site is hosted by Github Pages, which may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with this site. For more information about Github Pages as it relates to user privacy, see the [GitHub Privacy Statement](https://help.github.com/en/articles/github-privacy-statement). +Этот сайт использует Google Analytics для мониторинга и анализа трафика. Этот сайт размещен на Github Pages, который может собирать данные о вас, использовать cookies, встраивать дополнительные сторонние средства отслеживания и следить за вашим взаимодействием с этим сайтом. Для получения дополнительной информации о Github Pages, связанной с конфиденциальностью пользователей, см. [GitHub Privacy Statement](https://help.github.com/en/articles/github-privacy-statement). -### Information Collected +### Собираемая информация -This site does not collect personal information. This site may collect usage information in order to analyze interest in content and to provide advertisers with information on an aggregate basis. No personally identifiable information is shared with third-party advertising companies. +Этот сайт не собирает личную информацию. Этот сайт может собирать информацию об использовании для анализа интереса к содержимому и предоставления рекламодателям информации совокупного характера. Никакие личные данные не передаются сторонним рекламным компаниям. -### Third-Party Websites +### Сторонние веб-сайты -This site may link to other sites for users to use or reference. This site is not responsible for the privacy policies of other sites. Users should be aware that the privacy policies of other websites may differ from this one. +Этот сайт может содержать ссылки на другие сайты для пользовательских нужд или ознакомления. Этот сайт не несет ответственности за политику конфиденциальности других сайтов. Пользователи должны быть осведомлены, что политика конфиденциальности других сайтов может отличаться от данной политики. -### Changes to Privacy Policy +### Изменения в политике конфиденциальности -The contents of this Privacy Policy may be altered at any time and for any reason. +Содержание данной политики конфиденциальности может быть изменено в любое время и по любой причине. diff --git a/_pages/sr_SP/seedminer.txt b/_pages/sr_SP/seedminer.txt index c274d33412..0652a4ac90 100644 --- a/_pages/sr_SP/seedminer.txt +++ b/_pages/sr_SP/seedminer.txt @@ -4,7 +4,7 @@ title: "Seedminer" {% include toc title="Table of Contents" %} -### Obligatorisk läsning +### Required Reading To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/sr_SP/site-navigation.txt b/_pages/sr_SP/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/sr_SP/site-navigation.txt +++ b/_pages/sr_SP/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/sv_SE/finalizing-setup.txt b/_pages/sv_SE/finalizing-setup.txt index a17b37fab5..5e25349416 100644 --- a/_pages/sv_SE/finalizing-setup.txt +++ b/_pages/sv_SE/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/sv_SE/installing-boot9strap-(usm).txt b/_pages/sv_SE/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..dfac1f56ea --- /dev/null +++ b/_pages/sv_SE/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. SD kartınızı bilgisayarınıza takın +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. SD kartınızı cihazınıza tekrar takın +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Cihazınızı kapatın + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Kaydedip yeniden başlatmak için (Start) basın + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. SD kartınızı bilgisayarınıza takın +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/sv_SE/legacy-methods.txt b/_pages/sv_SE/legacy-methods.txt new file mode 100644 index 0000000000..7d14938d51 --- /dev/null +++ b/_pages/sv_SE/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Obligatorisk läsning + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/sv_SE/seedminer.txt b/_pages/sv_SE/seedminer.txt index c274d33412..897c10b1b4 100644 --- a/_pages/sv_SE/seedminer.txt +++ b/_pages/sv_SE/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/sv_SE/site-navigation.txt b/_pages/sv_SE/site-navigation.txt index a695427ffc..a133ddca55 100644 --- a/_pages/sv_SE/site-navigation.txt +++ b/_pages/sv_SE/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Slutför installationen](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installera boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Flytta EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Ändra Region](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Felsökning](troubleshooting) + [Avinstallera CFW](uninstall-cfw) + [Updatera B9S](updating-b9s) diff --git a/_pages/sv_SE/updating-b9s.txt b/_pages/sv_SE/updating-b9s.txt index 58f3c5eb23..cbedf47b0a 100644 --- a/_pages/sv_SE/updating-b9s.txt +++ b/_pages/sv_SE/updating-b9s.txt @@ -4,20 +4,20 @@ title: "Updating B9S" {% include toc title="Table of Contents" %} -### Leitura Obrigatória +### Obligatorisk läsning This page is for existing boot9strap users to update their installation of boot9strap to the latest version. {% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: +Det har förekommit rapporter om en våg av BANNINGAR som delas ut till CFW användare av Nintendo. För att skydda dig själv, gör följande steg innan du börjar denna guide: -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings +1. Gå till System Settings, sedan "Internet Settings", sedan "SpotPass" och sedan "Sending of System Information" +1. Inaktivera alternativet ”Sending of System Information” +1. Avsluta System Settings 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option +1. Inaktivera alternativet "Show friends what you're playing" 1. Exit your Friend List {% endcapture %} @@ -43,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card -1. Reinsert your SD card into your device +1. Sätt tillbaka ditt SD-kort i din enhet #### Section II - Installing boot9strap @@ -56,10 +56,10 @@ For all steps in this section, overwrite any existing files on your SD card. #### Section III - Update Luma3DS -1. Power off your device +1. Stäng av din enhet 1. Insert your SD card into your computer 1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file -1. Reinsert your SD card into your device +1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device #### Section IV - Configuring Luma3DS diff --git a/_pages/th_TH/finalizing-setup.txt b/_pages/th_TH/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/th_TH/finalizing-setup.txt +++ b/_pages/th_TH/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/th_TH/homebrew-launcher-(alternatives).txt b/_pages/th_TH/homebrew-launcher-(alternatives).txt index 18fc2717bd..e62f63109b 100644 --- a/_pages/th_TH/homebrew-launcher-(alternatives).txt +++ b/_pages/th_TH/homebrew-launcher-(alternatives).txt @@ -1,16 +1,16 @@ --- -title: "Homebrew Launcher (Alternatives)" +title: "Homebrew Launcher (Alternativas)" --- {% include toc title="Table of Contents" %} -### Required Reading +### Leitura Obrigatória This udsploit/safehax exploit is compatible with versions 9.0.0 through 11.3.0. -The Homebrew Launcher has many different entrypoints, or methods of launching. +O Homebrew Launcher possui vários pontos de entrada diferentes ou, métodos de iniciá-lo. -If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below. +Caso o browserhax não seja uma opção (verifique a tabela abaixo), você ainda não tenha nenhum desses jogos, e não possua outro 3DS com acesso ao Homebrew Launcher, a opção mais barata é comprar uma cópia "Nintendo Selects" do [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (assegure-se de comprar o cartucho correto para a sua região) e um [Powersaves](https://amzn.to/2fb3VY7) (compatível com todas as regiões), depois usar o oot3dhax da tabela abaixo. Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. @@ -27,13 +27,13 @@ To extract the `.7z` files linked on this page, you will need a file archiver li ### Instructions -1. Power off your device -1. Insert your SD card into your computer +1. Desligue seu dispositivo +1. Insira o cartão SD no seu computador 1. Create a folder named `3ds` on the root of your SD card if it does not already exist 1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copie o `boot.firm` do `.7z` do Luma3DS para a raíz do seu cartão SD +1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD +1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD 1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card 1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` @@ -41,25 +41,25 @@ To extract the `.7z` files linked on this page, you will need a file archiver li ![]({{ "/images/screenshots/boot9strap-hb-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device -1. Power on your device -1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: +1. Reinsira seu cartão SD no seu dispositivo +1. Ligue o seu dispositivo +1. Use um dos seguintes pontos de entrada alternativos para entrar no Homebrew Launcher: - | | Requires | Editions | Devices | Regions | Game Versions | System Versions | + | | Necessita de | Edições | Dispositivos | Regiões | Versões do jogo | Versões do sistema | |:-:|:-:|:-:|:-:|:-:|:-:|:-:| - | [browserhax](https://yls8.mtheall.com/3dsbrowserhax.php) | Nothing | Preinstalled | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-2 up to and including 11.0.0-33 | + | [browserhax](https://yls8.mtheall.com/3dsbrowserhax.php) | Nada| Pré-instalado| New, Old, 2DS | EUR, JPN, EUA| Todos | 9.0.0-2 até, e incluindo 11.0.0-33 | | [oot3dhax](https://github.com/yellows8/oot3dhax) | [*Ocarina of Time 3D*](https://amzn.to/2fkaKdp),
Either a powersaves or another 3DS which already has the Homebrew Launcher | Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | - | [smashbroshax](https://gbatemp.net/threads/397194/) | [*Super Smash Bros*](https://amzn.to/2ftGA72) | Cart, eShop | New | EUR, JPN, USA | <1.1.3,
Carts with "amiibo" on the cover are preinstalled with v1.1.4 | 9.0.0-X up to and including 11.3.0-X | - | [supermysterychunkhax](https://smd.salthax.org/) | [*Pokemon Super Mystery Dungeon*](https://amzn.to/2ebxZ75),
Another 3DS which already has the Homebrew Launcher | Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.9.0-X (USA/JPN) / 10.2.0-X (EUR) up to and including 11.0.0-X | + | [smashbroshax](https://gbatemp.net/threads/397194/) | [*Super Smash Bros*](https://amzn.to/2ftGA72) | Cartucho, eShop | New | EUR, JPN, EUA | <1.1.3,
Cartuchos com "amiibo" na capa são pré-instalados com v1.1.4 | 9.0.0-X até e incluindo 11.3.0-X | + | [supermysterychunkhax](https://smd.salthax.org/) | [*Pokemon Super Mystery Dungeon*](https://amzn.to/2ebxZ75),
Outro 3DS que já possui o Homebrew Launcher | Cartucho | New, Old, 2DS | EUR, JPN, EUA | Todas | 9.9.0-X (EUA/JPN) / 10.2.0-X (EUR) até, e incluindo 11.0.0-X | | [freakyhax](http://plutooo.github.io/freakyhax/) | [*Freakyforms Deluxe*](https://amzn.to/2f6eHO7) | eShop, Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | - | [basehaxx](http://mrnbayoh.github.io/basehaxx/) | *Pokemon [Omega Ruby](https://amzn.to/2eRILNQ)/[Alpha Sapphire](https://amzn.to/2ebGrmN)*,
Another 3DS which already has the Homebrew Launcher | Cart | New, Old, 2DS | EUR, JPN, USA | 1.0, 1.4 | 9.0.0-X up to and including 11.3.0-X | - | [BASICSploit](https://mrnbayoh.github.io/basicsploit/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | New, Old, 2DS | USA | 3.2.1 | 9.0.0-X up to and including 11.0.0-X | - | [smilehax](https://plutooo.github.io/smilehax/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | New, Old, 2DS | JPN, USA | 3.3.1 | 9.0.0-X up to and including 11.0.0-X | - | [stickerhax](https://github.com/yellows8/stickerhax) | [*Paper Mario: Sticker Star*](https://amzn.to/2f6aDx8),
Another 3DS which already has the Homebrew Launcher | eShop, Cart | New, Old, 2DS | EUR, JPN, KOR, USA | All | 9.0.0-X up to and including 11.3.0-X | + | [basehaxx](http://mrnbayoh.github.io/basehaxx/) | *Pokemon [Omega Ruby](https://amzn.to/2eRILNQ)/[Alpha Sapphire](https://amzn.to/2ebGrmN)*,
Outro 3DS que já possui o Homebrew Launcher | Cartucho | New, Old, 2DS | EUR, JPN, EUA | 1.0, 1.4 | 9.0.0-X até, e incluindo 11.3.0-X | + | [BASICSploit](https://mrnbayoh.github.io/basicsploit/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | New, Old, 2DS | EUA | 3.2.1 | 9.0.0-X até, e incluindo 11.0.0-X | + | [smilehax](https://plutooo.github.io/smilehax/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | New, Old, 2DS | JPN, EUA | 3.3.1 | 9.0.0-X até, e incluindo 11.0.0-X | + | [stickerhax](https://github.com/yellows8/stickerhax) | [*Paper Mario: Sticker Star*](https://amzn.to/2f6aDx8),
Outro 3DS que já possui o Homebrew Launcher | eShop, Cartucho | New, Old, 2DS | EUR, JPN, KOR, EUA | Todas | 9.0.0-X até, e incluindo 11.3.0-X | | [Ninjhax 2](http://smealum.github.io/ninjhax2/) | [*Cubic Ninja*](https://amzn.to/2eRI1by) | eShop, Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | | [Notehax](https://mrnbayoh.github.io/notehax/) | [*Flipnote Studio 3D*](https://my.nintendo.com/rewards/0391c34c430369c0) | eShop | New, Old, 2DS | EUR, JPN, USA | 1.3.1 (JPN) / 1.0.0 (EUR/USA) | 9.0.0-X up to and including 11.5.0-X | | [RPwnG](https://mrnbayoh.github.io/rpwng/) | [*RPG Maker Player*](http://www.nintendo.com/games/detail/rpg-maker-player-3ds) | eShop | New, Old, 2DS | EUR, JPN, USA | 1.1.4 (EUR) / 1.1.2 (JPN/USA) | 9.0.0-X up to and including 11.5.0-X | - | [GenHax](https://github.com/svanheulen/genhax_proxy_installer) | [*Monster Hunter X*](http://amzn.to/2gsk6Tk) | eShop | New | JPN | All | 9.9.0-X up to and including 11.2.0-X | + | [GenHax](https://github.com/svanheulen/genhax_proxy_installer) | [*Monster Hunter X*](http://amzn.to/2gsk6Tk) | eShop | New | JPN | Todas | 9.9.0-X até, e incluindo 11.2.0-X | {: .notice--info} -1. Your device should load the Homebrew Launcher +1. Seu dispositivo deve abrir o Homebrew Launcher ![]({{ "/images/screenshots/homebrew-launcher.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/th_TH/installing-boot9strap-(usm).txt b/_pages/th_TH/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/th_TH/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/th_TH/legacy-methods.txt b/_pages/th_TH/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/th_TH/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/th_TH/seedminer.txt b/_pages/th_TH/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/th_TH/seedminer.txt +++ b/_pages/th_TH/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/th_TH/site-navigation.txt b/_pages/th_TH/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/th_TH/site-navigation.txt +++ b/_pages/th_TH/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/tr_TR/finalizing-setup.txt b/_pages/tr_TR/finalizing-setup.txt index d6d4c232ff..a2e8fab8cd 100644 --- a/_pages/tr_TR/finalizing-setup.txt +++ b/_pages/tr_TR/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/tr_TR/installing-boot9strap-(usm).txt b/_pages/tr_TR/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..dfac1f56ea --- /dev/null +++ b/_pages/tr_TR/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. SD kartınızı bilgisayarınıza takın +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. SD kartınızı cihazınıza tekrar takın +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Cihazınızı kapatın + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Kaydedip yeniden başlatmak için (Start) basın + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. SD kartınızı bilgisayarınıza takın +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/tr_TR/legacy-methods.txt b/_pages/tr_TR/legacy-methods.txt new file mode 100644 index 0000000000..34930fc3f7 --- /dev/null +++ b/_pages/tr_TR/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/tr_TR/seedminer.txt b/_pages/tr_TR/seedminer.txt index 44d33c9bcb..eed07d3309 100644 --- a/_pages/tr_TR/seedminer.txt +++ b/_pages/tr_TR/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/tr_TR/site-navigation.txt b/_pages/tr_TR/site-navigation.txt index 07472505a7..4c3428e8fb 100644 --- a/_pages/tr_TR/site-navigation.txt +++ b/_pages/tr_TR/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [EmuNAND' Taşıma](move-emunand) + [ntrboot](ntrboot) + [Bölge Değiştirme](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/uk_UA/finalizing-setup.txt b/_pages/uk_UA/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/uk_UA/finalizing-setup.txt +++ b/_pages/uk_UA/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/uk_UA/installing-boot9strap-(usm).txt b/_pages/uk_UA/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/uk_UA/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/uk_UA/legacy-methods.txt b/_pages/uk_UA/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/uk_UA/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/uk_UA/seedminer.txt b/_pages/uk_UA/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/uk_UA/seedminer.txt +++ b/_pages/uk_UA/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/uk_UA/site-navigation.txt b/_pages/uk_UA/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/uk_UA/site-navigation.txt +++ b/_pages/uk_UA/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/vi_VN/finalizing-setup.txt b/_pages/vi_VN/finalizing-setup.txt index 4fe04cb8ae..fe3d1c1bbb 100644 --- a/_pages/vi_VN/finalizing-setup.txt +++ b/_pages/vi_VN/finalizing-setup.txt @@ -72,7 +72,7 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. Select "Miscellaneous options" 1. Select "Switch the hb. title to the current app." 1. Press (B) to continue diff --git a/_pages/vi_VN/installing-boot9strap-(usm).txt b/_pages/vi_VN/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..68a4aacbb1 --- /dev/null +++ b/_pages/vi_VN/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### What You Need + +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. Reinsert your SD card into your device +1. Power on your device +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. Power off your device + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### Section IV - Configuring Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. Launch System Settings on your device +1. Navigate to `Data Management` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. Insert your SD card into your computer +1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + + This `` will be the same one that you used in [Seedminer](seedminer) +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/vi_VN/legacy-methods.txt b/_pages/vi_VN/legacy-methods.txt new file mode 100644 index 0000000000..10c65e24e9 --- /dev/null +++ b/_pages/vi_VN/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/vi_VN/seedminer.txt b/_pages/vi_VN/seedminer.txt index ee6732839e..0652a4ac90 100644 --- a/_pages/vi_VN/seedminer.txt +++ b/_pages/vi_VN/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + Keep this file as you will need it in the upcoming pages ___ -### Methods -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -This method requires that the DS Internet Settings be functioning properly (see the test at the top of this page). - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -This method is only compatible with the EUR, JPN, and USA regions, and is somewhat more complicated than the above method. It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/vi_VN/site-navigation.txt b/_pages/vi_VN/site-navigation.txt index b8358f776c..a878c9c847 100644 --- a/_pages/vi_VN/site-navigation.txt +++ b/_pages/vi_VN/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Finalizing Setup](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/zh_CN/finalizing-setup.txt b/_pages/zh_CN/finalizing-setup.txt index 1e3faed566..8010792482 100644 --- a/_pages/zh_CN/finalizing-setup.txt +++ b/_pages/zh_CN/finalizing-setup.txt @@ -72,7 +72,7 @@ title: "完成安装" 1. 启动“下载通信(Download Play)”程序 (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. 等到你看到两个按钮 -1. 同时按下 “L”+“下”+“Select” 键来打开 Rosalina 菜单 +1. 同时按下 “L” + “↓” + “Select” 键来打开 Rosalina 菜单 1. 选择 “Miscellaneous options” 1. 选择 “Switch the hb. title to the current app.” 1. 按 “B” 键继续 diff --git a/_pages/zh_CN/homebrew-launcher-(steelhax).txt b/_pages/zh_CN/homebrew-launcher-(steelhax).txt index e36033ed75..98930467f2 100644 --- a/_pages/zh_CN/homebrew-launcher-(steelhax).txt +++ b/_pages/zh_CN/homebrew-launcher-(steelhax).txt @@ -1,63 +1,63 @@ --- -title: "安裝 Homebrew Launcher (透過 Steelhax)" +title: "启动 Homebrew Launcher（通过 Steelhax）" --- -{% include toc title="條目內容" %} +{% include toc title="目录内容" %} -### 必讀事項 +### 必读事项 -Seedminer 將使用您的 `movable.sed` 檔案並透過 Steelhax 漏洞開啟 Homebrew Launcher 以便在 DS 網路設定中植入修改後的 DSiWare 程式。 於使用此指南時，您必須先擁有 (或下載) eShop 中免費的『Steel Driver: Sub Wars』遊戲。 +Seedminer 将使用你的 `movable.sed` 文件，通过 Steelhax 漏洞启动 Homebrew Launcher，以便在 DS Download Play 中注入修改后的 DSiWare 程序。 在进行本教程前，你必须先拥有（或下载）eShop 中免费的“Steel Driver: Sub Wars”游戏。 -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +如果你的设备已通过如 Steelhax 或其他漏洞启动 Homebrew Launcher，那么你可以跳至 [DSiWare Dumper](dsidumper)。 {: .notice--success} -如果您先前已安裝『Steel Diver: Sub Wars』，此過程將會複寫您先前的存檔! +如果你之前已经拥有了 “Steel Diver: Sub Wars” 游戏，本教程将会覆盖你的游戏存档！ {: .notice--warning} -### 必備項目 +### 你需要准备点啥？ -* eShop 中免費的『Steel Diver: Sub Wars』遊戲 -* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 -* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* eShop中免费的 “Steel Diver: Sub Wars” 游戏 +* 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 +* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* 最新版 [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) +* [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *（根据你的 3DS 的区域和版本下载）* -### 操作說明 +### 操作步骤 -#### 第一節 — 準備工作 +#### 第一步 — 准备工作 -1. 在 SD 卡的根目錄底下建立一個新資料夾 `3ds` -1. 將 `boot.3dsx` 複製到 SD 卡根目錄中 -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. 複製 otherapp 啟動程式到 SD 卡的 `steelhax` 資料夾中，並重新命名其檔名為 `payload.bin` +1. 检查 SD 卡的根目录是否存在一个名为 `3ds` 的文件夹，如果没有则手动新建一个 +1. 复制 `boot.3dsx` 到你的 SD 卡根目录 +1. 从 `Steelhax-release.zip` 中解压 `steelhax` 文件夹到你 SD 卡的根目录 +1. 将 otherapp payload 复制到你 SD 卡的 `steelhax` 文件夹，并重命名为 `payload.bin` -#### 第二節 — Steelminer +#### 第二步 — Steelminer -1. 將 SD 卡插入主機中 -1. 啟動『Steel Diver: Sub Wars』並選擇任一 Mii 進行初始化 - + 如果出現更新提示，請拒絕 - + 如果您先前已更新了此遊戲，請透過主機的系統設定至資料管理中刪除遊戲更新 -1. 退出『Steel Diver: Sub Wars』 -1. 關閉您的主機 -1. 將 SD 卡插入至電腦中 -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. 上傳您的 `movable.sed` 檔案 -1. 選擇『Start!』 -1. 等待程序完畢為止 -1. 在您的 SD 卡中開啟 `Nintendo 3DS` -> `` -> `<32-字元-id>` -> `title` -> `00040000` -> `<8-字元-區碼>` -> `data` - + **歐版**: `000d7e00` +1. 将 SD 卡插入设备 +1. 启动 “Steel Diver: Sub Wars” 游戏一次，然后选择任意一个 Mii 来初始化存档 + + 请在提示游戏更新时拒绝更新游戏 + + 如果你已经更新了游戏，那么进入 “系统设置（System Settings）” -> “数据管理（Data Management menu）” 删除此游戏的更新补丁 +1. 关闭 “Steel Diver: Sub Wars” +1. 将设备关机 +1. 将你的 SD 卡插入到电脑 +1. 在你的电脑上打开 [Steelminer 注入器网页](https://seedminer.hacks.guide/steelhax/) +1. 上传你的 `movable.sed` 文件 +1. 选择 “Start!” +1. 等待该过程执行完成。 +1. 打开你 SD 卡的 `Nintendo 3DS` -> `` -> `<32位字符ID>` -> `title` -> `00040000` -> `<8位区码ID>` -> `data` 文件夹 + + **欧版**: `000d7e00` + **日版**: `000d7c00` + **美版**: `000d7d00` -1. 將您所下載的存檔複製至您 SD 卡中的 `data` 資料夾 - + 如提示時複寫遊戲存檔 -1. 將 SD 卡插回主機中 -1. 啟動您的主機 -1. 啟動『Steel Diver: Sub Wars』 -1. 如果漏洞成功執行，您的主機將自動載入 Homebrew Launcher - + 您可能會看見無可用應用程式的錯誤訊息。 -1. 關閉您的主機。 +1. 复制你刚下载的文件到 `data` 文件夹 + + 当提示时选择覆盖旧的文件 +1. 将 SD 卡重新插入你的主机 +1. 启动你的主机 +1. 启动 “Steel Diver: Sub Wars” +1. 如果漏洞成功执行，你的设备将进入到 Homebrew Launcher + + 你可能会看到一个没有可用的应用程序的错误信息。 +1. 将设备关机。 ___ -### Continue to [DSiWare Dumper](dsidumper) +### 继续至 [DSiWare Dumper](dsidumper) {: .notice--primary} diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..6ce09008f6 --- /dev/null +++ b/_pages/zh_CN/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "安装 boot9strap（通过 USM）" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +为了破解系统的 SAFE_MODE 固件，我们需要注入一个已被破解的 WiFi 配置文件到主机中。 + +我们可以利用 BannerBomb3 这个现有的漏洞进行以下操作。 + +为了做到这一点，我们使用了你的主机系统中的加密密钥（movable.sed）来构建一个 DSiWare 备份，以便于将被破解的 WiFi 配置文件注入到 WiFi 接入点列表。 + +一旦 WiFi 配置文件被注入，我们将会使用到 SAFE_MODE 来继续此教程。SAVE_MODE 是一个所有的 3DS 主机都存在的修复功能，之后它将被用于激活被破解的 WiFi 配置文件。 + +这些操作可在美、欧、日、韩版的主机上工作，你可通过系统版本号末尾的 U，E，J，K 字符来区分主机版本。 + +如果你的 L 键、R 键、↑ 键和 A 键中的其中一个按键无法使用，则你需要使用[传统方法](legacy-methods)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 +{: .notice--danger} + +### 你需要准备点啥？ + +* 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 +* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### 第一步 — 准备工作 + +1. 在你的电脑上打开 [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) +1. 点击 “选择文件” 选项，然后选择你的 movable.sed 上传 +1. 点击 “Download unSAFE_MODE-bb3 archive” + + 这将下载一个包含了名为 `F00D43D5.bin` 的已被破解的 DSiWare 备份和一个名为 `usm.bin` 的已被破解的 SAFE_MODE 存档文件的 zip 文件（`unSAFE_MODE-bb3.zip`）到你的电脑上 +1. 如果你的主机已经被你开机了，那么将其关机 +1. 将你的 SD 卡插入到电脑 +1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 +1. 从 USM 压缩文件中（`unSAFE_MODE-bb3.zip`）解压 `usm.bin` 到你 SD 卡的根目录下 +1. 移动至 `Nintendo 3DS` -> `` -> `<32位字符ID>` -> `Nintendo DSiWare` 文件夹 + + 这个 `` 和你在 [Seedminer](seedminer) 章节中使用的一样 + + 如果没有 `Nintendo DSiWare` 文件夹，创建它 +1. 如果这文件夹中有其他的 DSiWare 备份文件 (`<8位字符id>.bin`)，将它们移动到你的电脑上备份 + + 这文件夹应该会成为空文件夹。 将这些文件移动到电脑上备份可防止你删除了你有意保留的东西 +1. 从 USM 压缩文件中（`unSAFE_MODE-bb3.zip`）解压 `F00D43D5.bin` 到你 SD 卡的 `Nintendo DSiWare` 文件夹下 + +#### 第二步 — BannerBomb3 + +1. 将SD卡重新插入你的主机 +1. 启动你的主机 +1. 启动你主机上的 “系统设置(System settings)” +1. 移动至 `数据管理(Data Management)` -> `DSiWare` +1. 点击 SD 卡部分 + + 你的主机下屏应该会开始红色的闪烁，然后系统将会在稍后重启回到桌面中。 这意味着漏洞配置文件已成功复制 +1. 将设备关机 + +#### 第三步 — unSAFE_MODE + +1. 将你的主机置于关机状态，按住 L + R + ↑ + A 按键，然后按下电源键 + + 按住几秒后再松手。 你的主机将会启动到安全模式 +1. 点击 “OK” 来允许更新 + + 这个步骤实际上不存在更新。 这只是触发漏洞的一部分 +1. 点击 “I accept（我同意/同意します）” +1. 更新最终将失败，然后报出 `003-1099` 的错误。 这是剧本中的一部分 +1. 当系统问你“你想要配置互联网设置吗？（Would you like to configure Internet settings?）”时，点击 “Yes” +1. 在接下来出现的菜单中，移动至 `连接点 1（Connection 1）` -> `更改设置（Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy Settings）` -> `详细设置（Detailed Setup）` +1. 然后你应该会看到上屏提示 `B9S install SUCCESS`，然后你就可以按下任意键重启到 Luma 设置了 + +#### 第四步 — 设置 Luma3DS + +1. 你的主机应该会自动进入到 Luma 配置菜单 +1. 使用方向键和 “A” 键来启用以下设置： + + **“Show NAND or user string in System Settings”** +1. 按下 “Start” 键保存设置并重启 + + 你的主机应该在一会后加载到系统桌面。 如果你等了超过五分钟还是黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### 第五步 — 还原 WiFi 配置文件 + +1. 启动你主机上的 “系统设置(System settings)” +1. 移动至 `数据管理(Data Management)` -> `DSiWare` +1. 点击 SD 卡部分 + + 你的主机下屏应该会开始绿色的闪烁，然后系统将会在稍后重启回到桌面中。 这意味着你的 WiFi 配置文件已成功恢复 +1. 关闭主机 +1. 将你的 SD 卡插入到电脑 +1. 移动至 `Nintendo 3DS` -> `` -> `<32位字符ID>` -> `Nintendo DSiWare` 文件夹 + + 这个 `` 和你在 [Seedminer](seedminer) 章节中使用的一样 +1. 删除 Nintendo DSiWare 文件夹中的 `F00D43D5.bin` 文件 +1. 继续至完成安装 + +___ + +### 继续至[完成安装](finalizing-setup) +{: .notice--primary} diff --git a/_pages/zh_CN/legacy-methods.txt b/_pages/zh_CN/legacy-methods.txt new file mode 100644 index 0000000000..85e25fa6c8 --- /dev/null +++ b/_pages/zh_CN/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "传统方法" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +安装自制固件（CFW）在近期出现了许多的改进和进步的方法。 + +为此，建议你在 [Seedminer](seedminer) 页面中查找并使用最新的方法。 + +然而，由于某些情况这里仍然保留了一些“传统”或“过时”的方法。 你需要先完成 [Seedminer](seedminer) 部分。 + +如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 + +1. [BannerBomb3](bannerbomb3)：Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx))：Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx 也有子方法：[Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +做完这些步骤之后你也应该将[完成安装](finalizing-setup)做完。 \ No newline at end of file diff --git a/_pages/zh_CN/region-changing.txt b/_pages/zh_CN/region-changing.txt index e5d46cbcc6..b7ff09277a 100644 --- a/_pages/zh_CN/region-changing.txt +++ b/_pages/zh_CN/region-changing.txt @@ -90,7 +90,7 @@ title: "区域变更" #### 第三步 — 启动 FBI 应用 1. 启动“下载通信(Download Play)”程序 (它长[这样]({{ "/images/download-play-icon.png" | absolute_url }}) -1. 同时按下 “L”+“下”+“Select” 键来打开 Rosalina 菜单 +1. 同时按下“L”+“下”+“Select” 键来打开 Rosalina 菜单 1. 选择 “Miscellaneous options” 1. 选择 “Switch the hb. title to the current app.” 1. 按 “B” 键继续 diff --git a/_pages/zh_CN/seedminer.txt b/_pages/zh_CN/seedminer.txt index ca5463d0d6..3456b37f7e 100644 --- a/_pages/zh_CN/seedminer.txt +++ b/_pages/zh_CN/seedminer.txt @@ -27,7 +27,7 @@ title: "Seedminer" 1. 进入系统设置，然后进入“互联网设置（Internet Settings）”，然后进入“任天堂 DS 连接（Nintendo DS Connections）” 1. 点击 “OK” 1. 如果你的设备进入到了 “任天堂 Wi-Fi 连接设置（Nintendo Wi-Fi Connection Setup）” 菜单中，则此测试成功 - + 如果屏幕一直黑屏或者看上去似乎死机了，那么测试失败。你将无法使用 bannerbomb3 （因为此漏洞需要能正常使用 DS 网络设置的主机） + + 如果屏幕一直黑屏或者看上去似乎死机了，那么测试失败。你将无法使用 bannerbomb3 方法破解（因为此漏洞需要能正常使用 DS 网络设置的主机） 1. 退出此菜单 #### 第二步 — 准备工作 @@ -75,29 +75,20 @@ title: "Seedminer" + 你在之后还会用到这个文件，请先把这个文件存起来 ___ -### 方法 -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -本章节 Seedminer 将使用你的 `movable.sed` 文件来解密所有的 DSiWare 程序，以便在3DS中内置的 DS 网络设定中注入修改后的 DSiWare 程序。 +这种将使用 Seedminer 进行进一步破解的方法使用了你的 `movable.sed` 来利用所有机型都有的 SAFE_MODE 固件来进行破解系统。 这种方法与所有区域兼容，尽管神游机因为阉割了此部分所需内容并不能执行这个操作 -这个方法要求 DS 互联网设置正常运行。请通过此页面顶部的测试确认可以使用后再继续此教程。 - -继续至 [BannerBomb3](bannerbomb3) +继续至 [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### 传统方法 -本章节 Seedminer 将使用你的 `movable.sed` 文件，通过 PicHaxx 漏洞启动 Homebrew Launcher，以便获得权限来启动 Homebrew Launcher 来导出系统的 DsiWare 软件。 在进行本教程前，你必须先拥有 （或下载） eShop 中的免费的“精灵宝可梦：绘图方块（Pokemon Picross）”游戏。 - -这个方法只适用于欧版，日版和美版的设备。而且比另一方法稍微复杂一些。 只有当你无法运行 DS 互联网设置时才建议使用此方法。 - -继续至 [启动 Homebrew Launcher （通过PicHaxx）](homebrew-launcher-(pichaxx)) -{: .notice--primary} +这些方法已经过时，这里建议不要使用。除非你有特殊的目的或被建议使用此方法。 +[传统方法](legacy-methods) \ No newline at end of file diff --git a/_pages/zh_CN/site-navigation.txt b/_pages/zh_CN/site-navigation.txt index c8e9b7cc95..8eb59a3989 100644 --- a/_pages/zh_CN/site-navigation.txt +++ b/_pages/zh_CN/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [完成安装](finalizing-setup) + [启动 Homebrew Launcher(通过Soundhax)](homebrew-launcher-(soundhax)) -+ [安装 boot9strap (通过 SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [安装 boot9strap（通过 unSAFE_MODE）](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [安装 boot9strap （通过 ntrboot）](installing-boot9strap-(ntrboot)) + [安装 boot9strap （通过 SafeB9SInstaller）](installing-boot9strap-(safeb9sinstaller)) + [安装 boot9strap（通过 Soundhax）](installing-boot9strap-(soundhax)) ++ [安装 boot9strap（通过 unSAFE_MODE）](installing-boot9strap-(usm)) + [迁移 EmuNAND 数据](move-emunand) + [ntrboot](ntrboot) + [区域变更](region-changing) + [Seedminer](seedminer) ++ [传统 Seedminer 方法](legacy-methods) + [问题排查](troubleshooting) + [卸载自制系统](uninstall-cfw) + [升级 B9S](updating-b9s) diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt index 9ec01de901..c29fa9b5ab 100644 --- a/_pages/zh_TW/finalizing-setup.txt +++ b/_pages/zh_TW/finalizing-setup.txt @@ -72,7 +72,7 @@ title: "完成安裝" 1. 啟動『下載通信(Download Play)』程式 (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Wait until you see the two buttons -1. 同時按下『L』+『下』+『Select』鍵以啟動 Rosalina 選單 +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu 1. 選擇『Miscellaneous options』 1. 選擇『Switch the hb. title to the current app.』 1. 按『B』繼續 diff --git a/_pages/zh_TW/installing-boot9strap-(usm).txt b/_pages/zh_TW/installing-boot9strap-(usm).txt new file mode 100644 index 0000000000..4814aca4c3 --- /dev/null +++ b/_pages/zh_TW/installing-boot9strap-(usm).txt @@ -0,0 +1,90 @@ +--- +title: "Installing boot9strap (USM)" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. + +We can do this using an existing exploit, BannerBomb3. + +To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. + +Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. + +These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} + +### 必備項目 + +* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 +* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) + +#### 第一節 — 準備工作 + +1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Upload your movable.sed using the "Choose File" option +1. Click "Download unSAFE_MODE-bb3 archive" + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. If your console is powered on, power off your console +1. 將 SD 卡插入至電腦中 +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. 於您的 SD 卡中，移動至 `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` + + 此 `` 字串將與您在 [Seedminer](seedminer) 中所使用的字串一樣 + + If `Nintendo DSiWare` does not exist, create it +1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups +1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + +#### Section II - BannerBomb3 + +1. 將 SD 卡插回主機中 +1. 啟動您的主機 +1. 於您主機上啟動系統設定 (System Settings) +1. 移動至 `檔案管理 (Data Management)` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied +1. 關閉您的主機 + +#### Section III - unSAFE_MODE + +1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions +1. The update will eventually fail, with error code `003-1099`. This is intended behaviour +1. When asked "Would you like to configure Internet settings?", select "Yes" +1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` +1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration + +#### 第四節 — 設定 Luma3DS + +1. Your device should automatically show the Luma Configuration menu +1. 透過方向鍵及『A』以開啟下列選項： + + **『Show NAND or user string in System Settings』** +1. 按『Start』鍵以存檔並重新啟動系統 + + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### Section V - Restoring WiFi Configuration Profiles + +1. 於您主機上啟動系統設定 (System Settings) +1. 移動至 `檔案管理 (Data Management)` -> `DSiWare` +1. Click on the SD Card section + + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored +1. Power your system off +1. 將 SD 卡插入至電腦中 +1. 於您的 SD 卡中，移動至 `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` + + 此 `` 字串將與您在 [Seedminer](seedminer) 中所使用的字串一樣 +1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder +1. Continue to Finalizing Setup + +___ + +### 繼續至[完成安裝](finalizing-setup) +{: .notice--primary} diff --git a/_pages/zh_TW/legacy-methods.txt b/_pages/zh_TW/legacy-methods.txt new file mode 100644 index 0000000000..6a25073710 --- /dev/null +++ b/_pages/zh_TW/legacy-methods.txt @@ -0,0 +1,21 @@ +--- +title: "Legacy Methods" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +There have been multiple improvements and advancements to methods for installing CFW over the last short while. + +For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. + +However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. + +If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. + +1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool +1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool + + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + +All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file diff --git a/_pages/zh_TW/seedminer.txt b/_pages/zh_TW/seedminer.txt index 41580fd010..5149d6767c 100644 --- a/_pages/zh_TW/seedminer.txt +++ b/_pages/zh_TW/seedminer.txt @@ -75,29 +75,20 @@ There are two different methods for building on the Seedminer exploit (described + 您在待會還會用到該檔案，請先將其保留 ___ -### 方法 -___ +#### Seedminer + unSAFE_MODE -#### Seedminer + BannerBomb3 + Fredtool - -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. +This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. This method is compatible with all regions, though CHN region is not covered by this guide. -此方法需要使用 DS 網路設定。請透過本頁上方的測試確認您的主機可以正常使用此程式再行繼續。 - -Continue to [BannerBomb3](bannerbomb3) +Continue to [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Seedminer + PicHaxx + DSiDumper + Fredtool +#### Legacy Methods -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purpose of dumping a system DSiWare. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -此方法僅適用於歐版、日版、及美版主機，且比上方所述方法更加複雜一點。 It is only recommended to use this method if you do not have a functioning DS Internet Settings application. - -Continue to [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -{: .notice--primary} +These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +[Legacy Methods](legacy-methods) \ No newline at end of file diff --git a/_pages/zh_TW/site-navigation.txt b/_pages/zh_TW/site-navigation.txt index eb440faf65..f65b387fbc 100644 --- a/_pages/zh_TW/site-navigation.txt +++ b/_pages/zh_TW/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [完成安裝](finalizing-setup) + [Homebrew Launcher (透過 Soundhax)](homebrew-launcher-(soundhax)) -+ [安裝 boot9strap (透過 SafeB9SInstaller)](installing-boot9strap-(SafeB9SInstaller)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,10 +49,12 @@ sitemap: false + [安裝 boot9strap (透過 ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [安裝 boot9strap (透過 Soundhax)](installing-boot9strap-(soundhax)) ++ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [移植 EmuNAND](move-emunand) + [ntrboot](ntrboot) + [區碼變更](region-changing) + [Seedminer](seedminer) ++ [Legacy Seedminer Methods](legacy-methods) + [疑難排解](troubleshooting) + [卸載自製韌體](uninstall-cfw) + [更新 B9S](updating-b9s) From ac4d3e21e5ea6f8557e5c8924f78363972d6609b Mon Sep 17 00:00:00 2001 From: Ian Burgwin Date: Mon, 27 Apr 2020 17:43:18 -0700 Subject: [PATCH 3/6] New translations installing-boot9strap-(usm).txt (Swedish) (#1756) --- _pages/sv_SE/installing-boot9strap-(usm).txt | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/_pages/sv_SE/installing-boot9strap-(usm).txt b/_pages/sv_SE/installing-boot9strap-(usm).txt index dfac1f56ea..b0e164d983 100644 --- a/_pages/sv_SE/installing-boot9strap-(usm).txt +++ b/_pages/sv_SE/installing-boot9strap-(usm).txt @@ -2,9 +2,9 @@ title: "Installing boot9strap (USM)" --- -{% include toc title = "İçindekiler"%} +{% include toc title="Table of Contents" %} -### Okumanız Gerekli +### Obligatorisk läsning In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -31,7 +31,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) 1. If your console is powered on, power off your console -1. SD kartınızı bilgisayarınıza takın +1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card 1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card @@ -43,13 +43,13 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section II - BannerBomb3 -1. SD kartınızı cihazınıza tekrar takın +1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device 1. Launch System Settings on your device 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied -1. Cihazınızı kapatın +1. Stäng av din enhet #### Section III - unSAFE_MODE @@ -68,7 +68,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Your device should automatically show the Luma Configuration menu 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -1. Kaydedip yeniden başlatmak için (Start) basın +1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) #### Section V - Restoring WiFi Configuration Profiles @@ -78,7 +78,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored 1. Power your system off -1. SD kartınızı bilgisayarınıza takın +1. Insert your SD card into your computer 1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card + This `` will be the same one that you used in [Seedminer](seedminer) 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder From c53aafde463002505c6ce00c35de3c7aed38e1a3 Mon Sep 17 00:00:00 2001 From: Stefan Schnitzler <41997317+deadphoenix8091@users.noreply.github.com> Date: Tue, 28 Apr 2020 04:49:54 +0200 Subject: [PATCH 4/6] Add USM Title to sidebar pages list (#1755) This will fix the progress tracking issue. --- _data/navigation/en_US.yml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/_data/navigation/en_US.yml b/_data/navigation/en_US.yml index 511149c867..523b6cc273 100644 --- a/_data/navigation/en_US.yml +++ b/_data/navigation/en_US.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup From 56c9ae549d659b110e616bca690f8df32285df12 Mon Sep 17 00:00:00 2001 From: Ian Burgwin Date: Mon, 27 Apr 2020 22:54:14 -0700 Subject: [PATCH 5/6] New Crowdin translations (#1757) * New translations donations.txt (Indonesian) * New translations en_US.yml (Estonian) * New translations en_US.yml (Norwegian) * New translations en_US.yml (Croatian) * New translations en_US.yml (Thai) * New translations en_US.yml (Indonesian) * New translations en_US.yml (Portuguese, Brazilian) * New translations en_US.yml (Vietnamese) * New translations en_US.yml (Chinese Traditional) * New translations en_US.yml (Chinese Simplified) * New translations en_US.yml (Ukrainian) * New translations en_US.yml (Turkish) * New translations en_US.yml (Swedish) * New translations en_US.yml (Serbian (Cyrillic)) * New translations en_US.yml (Russian) * New translations en_US.yml (Portuguese) * New translations en_US.yml (Polish) * New translations en_US.yml (Dutch) * New translations en_US.yml (Romanian) * New translations en_US.yml (Korean) * New translations en_US.yml (French) * New translations en_US.yml (Spanish) * New translations en_US.yml (Afrikaans) * New translations en_US.yml (Arabic) * New translations en_US.yml (Catalan) * New translations en_US.yml (Czech) * New translations en_US.yml (Danish) * New translations en_US.yml (German) * New translations en_US.yml (Greek) * New translations en_US.yml (Finnish) * New translations en_US.yml (Hebrew) * New translations en_US.yml (Hungarian) * New translations en_US.yml (Italian) * New translations en_US.yml (Japanese) * New translations en_US.yml (Malay) * New translations en_US.yml (Pirate English) --- _data/navigation/af_ZA.yml | 3 +++ _data/navigation/ar_SA.yml | 3 +++ _data/navigation/ca_ES.yml | 3 +++ _data/navigation/cs_CZ.yml | 3 +++ _data/navigation/da_DK.yml | 3 +++ _data/navigation/de_DE.yml | 3 +++ _data/navigation/el_GR.yml | 3 +++ _data/navigation/en_PT.yml | 3 +++ _data/navigation/es_ES.yml | 3 +++ _data/navigation/et_EE.yml | 3 +++ _data/navigation/fi_FI.yml | 3 +++ _data/navigation/fr_FR.yml | 5 ++++- _data/navigation/he_IL.yml | 3 +++ _data/navigation/hr_HR.yml | 3 +++ _data/navigation/hu_HU.yml | 3 +++ _data/navigation/id_ID.yml | 3 +++ _data/navigation/it_IT.yml | 5 ++++- _data/navigation/ja_JP.yml | 3 +++ _data/navigation/ko_KR.yml | 3 +++ _data/navigation/ms_MY.yml | 3 +++ _data/navigation/nl_NL.yml | 3 +++ _data/navigation/no_NO.yml | 3 +++ _data/navigation/pl_PL.yml | 3 +++ _data/navigation/pt_BR.yml | 3 +++ _data/navigation/pt_PT.yml | 3 +++ _data/navigation/ro_RO.yml | 5 ++++- _data/navigation/ru_RU.yml | 5 ++++- _data/navigation/sr_SP.yml | 3 +++ _data/navigation/sv_SE.yml | 3 +++ _data/navigation/th_TH.yml | 3 +++ _data/navigation/tr_TR.yml | 3 +++ _data/navigation/uk_UA.yml | 3 +++ _data/navigation/vi_VN.yml | 3 +++ _data/navigation/zh_CN.yml | 5 ++++- _data/navigation/zh_TW.yml | 3 +++ _pages/id_ID/donations.txt | 2 +- 36 files changed, 111 insertions(+), 6 deletions(-) diff --git a/_data/navigation/af_ZA.yml b/_data/navigation/af_ZA.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/af_ZA.yml +++ b/_data/navigation/af_ZA.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ar_SA.yml b/_data/navigation/ar_SA.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/ar_SA.yml +++ b/_data/navigation/ar_SA.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ca_ES.yml b/_data/navigation/ca_ES.yml index d5a15b9910..3416ee1a93 100644 --- a/_data/navigation/ca_ES.yml +++ b/_data/navigation/ca_ES.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/cs_CZ.yml b/_data/navigation/cs_CZ.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/cs_CZ.yml +++ b/_data/navigation/cs_CZ.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/da_DK.yml b/_data/navigation/da_DK.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/da_DK.yml +++ b/_data/navigation/da_DK.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/de_DE.yml b/_data/navigation/de_DE.yml index 5b1f2ffb1a..01e18e043a 100644 --- a/_data/navigation/de_DE.yml +++ b/_data/navigation/de_DE.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/el_GR.yml b/_data/navigation/el_GR.yml index e23c8f288d..77bf5adf42 100644 --- a/_data/navigation/el_GR.yml +++ b/_data/navigation/el_GR.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/en_PT.yml b/_data/navigation/en_PT.yml index 52acd0bb40..bb7680c555 100644 --- a/_data/navigation/en_PT.yml +++ b/_data/navigation/en_PT.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/es_ES.yml b/_data/navigation/es_ES.yml index 6fc9e1f1b9..41651168d7 100644 --- a/_data/navigation/es_ES.yml +++ b/_data/navigation/es_ES.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/et_EE.yml b/_data/navigation/et_EE.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/et_EE.yml +++ b/_data/navigation/et_EE.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/fi_FI.yml b/_data/navigation/fi_FI.yml index 8273ab2682..2de30ec0e3 100644 --- a/_data/navigation/fi_FI.yml +++ b/_data/navigation/fi_FI.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/fr_FR.yml b/_data/navigation/fr_FR.yml index 73f47dbf75..76ed0df185 100644 --- a/_data/navigation/fr_FR.yml +++ b/_data/navigation/fr_FR.yml @@ -136,5 +136,8 @@ sidebar_pages: title: Installation de boot9strap (Fredtool) url: installing-boot9strap-(fredtool) - - title: Finalisation de la configuration + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) + - + title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/he_IL.yml b/_data/navigation/he_IL.yml index 74f055bbaa..a21df8c20c 100644 --- a/_data/navigation/he_IL.yml +++ b/_data/navigation/he_IL.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/hr_HR.yml b/_data/navigation/hr_HR.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/hr_HR.yml +++ b/_data/navigation/hr_HR.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/hu_HU.yml b/_data/navigation/hu_HU.yml index 48b5e4540c..607401fec7 100644 --- a/_data/navigation/hu_HU.yml +++ b/_data/navigation/hu_HU.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/id_ID.yml b/_data/navigation/id_ID.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/id_ID.yml +++ b/_data/navigation/id_ID.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/it_IT.yml b/_data/navigation/it_IT.yml index e0a9b1916b..3d9f46600c 100644 --- a/_data/navigation/it_IT.yml +++ b/_data/navigation/it_IT.yml @@ -136,5 +136,8 @@ sidebar_pages: title: Installazione di boot9strap (Fredtool) url: installing-boot9strap-(fredtool) - - title: Completamento dell'installazione + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) + - + title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ja_JP.yml b/_data/navigation/ja_JP.yml index 2531a7587d..153b03fead 100644 --- a/_data/navigation/ja_JP.yml +++ b/_data/navigation/ja_JP.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ko_KR.yml b/_data/navigation/ko_KR.yml index 2942b2b9a0..e170eca836 100644 --- a/_data/navigation/ko_KR.yml +++ b/_data/navigation/ko_KR.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ms_MY.yml b/_data/navigation/ms_MY.yml index a002c83f2c..2f23b30e37 100644 --- a/_data/navigation/ms_MY.yml +++ b/_data/navigation/ms_MY.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/nl_NL.yml b/_data/navigation/nl_NL.yml index ef7ca70255..bcb0e9048f 100644 --- a/_data/navigation/nl_NL.yml +++ b/_data/navigation/nl_NL.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/no_NO.yml b/_data/navigation/no_NO.yml index 02b10f9a6d..1754c00972 100644 --- a/_data/navigation/no_NO.yml +++ b/_data/navigation/no_NO.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/pl_PL.yml b/_data/navigation/pl_PL.yml index 40660589d0..41efd45b57 100644 --- a/_data/navigation/pl_PL.yml +++ b/_data/navigation/pl_PL.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/pt_BR.yml b/_data/navigation/pt_BR.yml index 43b7485c6a..74f28ca68e 100644 --- a/_data/navigation/pt_BR.yml +++ b/_data/navigation/pt_BR.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/pt_PT.yml b/_data/navigation/pt_PT.yml index 3d18ef70b7..460be1f019 100644 --- a/_data/navigation/pt_PT.yml +++ b/_data/navigation/pt_PT.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ro_RO.yml b/_data/navigation/ro_RO.yml index 79656d396a..6366d39f9a 100644 --- a/_data/navigation/ro_RO.yml +++ b/_data/navigation/ro_RO.yml @@ -136,5 +136,8 @@ sidebar_pages: title: Instalând boot9strap (Fredtool) url: installing-boot9strap-(fredtool) - - title: Finalizând instalarea + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) + - + title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ru_RU.yml b/_data/navigation/ru_RU.yml index 65b79d11c9..de02a112b2 100644 --- a/_data/navigation/ru_RU.yml +++ b/_data/navigation/ru_RU.yml @@ -136,5 +136,8 @@ sidebar_pages: title: Установка boot9strap (Fredtool) url: installing-boot9strap-(fredtool) - - title: Завершение установки + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) + - + title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/sr_SP.yml b/_data/navigation/sr_SP.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/sr_SP.yml +++ b/_data/navigation/sr_SP.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/sv_SE.yml b/_data/navigation/sv_SE.yml index 8191771f23..eeaa662671 100644 --- a/_data/navigation/sv_SE.yml +++ b/_data/navigation/sv_SE.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/th_TH.yml b/_data/navigation/th_TH.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/th_TH.yml +++ b/_data/navigation/th_TH.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/tr_TR.yml b/_data/navigation/tr_TR.yml index 651ef1ce29..693887b681 100644 --- a/_data/navigation/tr_TR.yml +++ b/_data/navigation/tr_TR.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/uk_UA.yml b/_data/navigation/uk_UA.yml index 1cadb0e483..1d38cb390b 100644 --- a/_data/navigation/uk_UA.yml +++ b/_data/navigation/uk_UA.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/vi_VN.yml b/_data/navigation/vi_VN.yml index 149adf1d4c..0632b72210 100644 --- a/_data/navigation/vi_VN.yml +++ b/_data/navigation/vi_VN.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/zh_CN.yml b/_data/navigation/zh_CN.yml index b43e383c10..1bc341dc99 100644 --- a/_data/navigation/zh_CN.yml +++ b/_data/navigation/zh_CN.yml @@ -136,5 +136,8 @@ sidebar_pages: title: 安装 boot9strap（通过 Fredtool） url: installing-boot9strap-(fredtool) - - title: 完成安装 + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) + - + title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/zh_TW.yml b/_data/navigation/zh_TW.yml index 6347065b71..3307a3e2ca 100644 --- a/_data/navigation/zh_TW.yml +++ b/_data/navigation/zh_TW.yml @@ -135,6 +135,9 @@ sidebar_pages: - title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) + - + title: Installing boot9strap (USM) + url: installing-boot9strap-(usm) - title: Finalizing Setup url: finalizing-setup diff --git a/_pages/id_ID/donations.txt b/_pages/id_ID/donations.txt index 7f5e56f592..9089a295fc 100644 --- a/_pages/id_ID/donations.txt +++ b/_pages/id_ID/donations.txt @@ -1,5 +1,5 @@ --- -title: "Donations" # +title: "Doações" # layout: single-no-ads --- From 5bf0c8229e3b12920c94da6cb053f3e365b16392 Mon Sep 17 00:00:00 2001 From: Ian Burgwin Date: Tue, 28 Apr 2020 16:15:34 -0700 Subject: [PATCH 6/6] New Crowdin translations (#1758) * New translations installing-boot9strap-(usm).txt (Chinese Simplified) * New translations en_US.yml (Chinese Simplified) * New translations site-navigation.txt (Italian) * New translations finalizing-setup.txt (Italian) * New translations seedminer.txt (Italian) * New translations installing-boot9strap-(usm).txt (Italian) * New translations legacy-methods.txt (Italian) * New translations en_US.yml (Italian) * New translations legacy-methods.txt (Italian) * New translations legacy-methods.txt (Italian) --- _data/navigation/it_IT.yml | 4 +- _data/navigation/zh_CN.yml | 4 +- _pages/it_IT/finalizing-setup.txt | 2 +- _pages/it_IT/installing-boot9strap-(usm).txt | 60 ++++++++++---------- _pages/it_IT/legacy-methods.txt | 14 ++--- _pages/it_IT/seedminer.txt | 10 ++-- _pages/it_IT/site-navigation.txt | 6 +- _pages/zh_CN/installing-boot9strap-(usm).txt | 2 +- 8 files changed, 51 insertions(+), 51 deletions(-) diff --git a/_data/navigation/it_IT.yml b/_data/navigation/it_IT.yml index 3d9f46600c..d0bffb37f9 100644 --- a/_data/navigation/it_IT.yml +++ b/_data/navigation/it_IT.yml @@ -136,8 +136,8 @@ sidebar_pages: title: Installazione di boot9strap (Fredtool) url: installing-boot9strap-(fredtool) - - title: Installing boot9strap (USM) + title: Installazione di boot9strap (USM) url: installing-boot9strap-(usm) - - title: Finalizing Setup + title: Completamento dell'installazione url: finalizing-setup diff --git a/_data/navigation/zh_CN.yml b/_data/navigation/zh_CN.yml index 1bc341dc99..3c90db9f14 100644 --- a/_data/navigation/zh_CN.yml +++ b/_data/navigation/zh_CN.yml @@ -136,8 +136,8 @@ sidebar_pages: title: 安装 boot9strap（通过 Fredtool） url: installing-boot9strap-(fredtool) - - title: Installing boot9strap (USM) + title: 安装 boot9strap（通过 USM） url: installing-boot9strap-(usm) - - title: Finalizing Setup + title: 完成安装 url: finalizing-setup diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt index cf99b4a86f..5de905c2c1 100644 --- a/_pages/it_IT/finalizing-setup.txt +++ b/_pages/it_IT/finalizing-setup.txt @@ -72,7 +72,7 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e 1. Avvia l'applicazione "Modalità download" (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. Attendi finché non vedrai i due pulsanti -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina 1. Seleziona "Miscellaneous options" 1. Seleziona "Switch the hb. title to the current app." 1. Premi (B) per continuare diff --git a/_pages/it_IT/installing-boot9strap-(usm).txt b/_pages/it_IT/installing-boot9strap-(usm).txt index 10444d3cf8..02a77df2f0 100644 --- a/_pages/it_IT/installing-boot9strap-(usm).txt +++ b/_pages/it_IT/installing-boot9strap-(usm).txt @@ -1,22 +1,22 @@ --- -title: "Installing boot9strap (USM)" +title: "Installazione di boot9strap (USM)" --- {% include toc title="Indice" %} ### Lettura necessaria -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. +Per sfruttare il firmware SAFE_MODE del nostro sistema, dobbiamo iniettare un profilo di connessione WiFi modificato. -We can do this using an existing exploit, BannerBomb3. +Lo faremo utilizzando un exploit già esistente, BannerBomb3. -To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. +Per realizzare l'obiettivo, utilizziamo la chiave di cifratura della tua console (movable.sed) per generare un backup DSiWare che induce la console a iniettare il profilo WiFi modificato nella tua lista di connessioni disponibili. -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. +Una volta inserito il profilo WiFi utilizzeremo SAFE_MODE, una funzionalità di ripristino presente su ogni console 3DS, per attivare il profilo WiFi modificato. Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo. -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tradizionale](legacy-methods). In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp). {: .notice--danger} ### Cosa serve @@ -26,63 +26,63 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Sezione I - Preparazione -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer +1. Avvia [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) sul tuo computer 1. Carica il tuo file movable.sed scegliendo l'opzione "Choose File" -1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) +1. Clicca su "Download unSAFE_MODE-bb3 archive" + + Verrà scaricato un exploit DSiWare chiamato `F00D43D5.bin` e l'exploit di SAFE_MODE `usm.bin` all'interno di un archivio zip (`unSAFE_MODE-bb3.zip`) 1. Se la tua console è accesa, spegnila 1. Inserisci la scheda SD nel tuo computer 1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card +1. Copia il file `usm.bin` dall'archivio USM (`unSAFE_MODE-bb3.zip`) nella directory principale della tua scheda SD 1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) + Se la cartella `Nintendo DSiWare` non esiste, creala 1. Se ci sono file di backup DSiWare esistenti (``) nella cartella, spostali sul tuo PC - + Così facendo la cartella Nintendo DSiWare verrà svuotata. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder + + Così facendo la cartella Nintendo DSiWare verrà svuotata. Spostare i file sul tuo PC servirà a prevenire l'eliminazione accidentale dei backup +1. Copia il file `F00D43D5.bin` dall'archivio USM (`unSAFE_MODE-bb3.zip`) nella cartella `Nintendo DSiWare` -#### Section II - BannerBomb3 +#### Sezione II - BannerBomb3 1. Reinserisci la scheda SD nella tua console 1. Accendi la console 1. Avvia "Impostazioni della console" 1. Entra in `Gestione dati` -> `DSiWare` 1. Clicca sulla sezione Scheda SD - + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied + + Lo schermo inferiore dovrebbe colorarsi di rosso per pochi istanti, dopodiché la console si riavvierà nel menu HOME. Vuol dire che il profilo modificato è stato copiato con successo 1. Spegni il tuo 3DS -#### Section III - unSAFE_MODE +#### Sezione III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration +1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché accendi la console + + Rilascia i pulsanti dopo pochi secondi. La console si avvierà in Modalità Provvisoria +1. Premi "OK" per accettare l'aggiornamento + + Non c'è alcun aggiornamento. Fa parte del procedimento +1. Premi "Accetto" per accettare i termini e le condizioni +1. L'aggiornamento fallirà, con codice di errore `003-1099`. Questo risultato è corretto +1. Alla richiesta "Vuoi configurare le Impostazioni internet?", seleziona "Sì" +1. Nel menu successivo, entra in `Connessione 1` -> `Modifica` -> pagina successiva (la freccia a destra) -> `Impostazioni proxy` -> `Impostazioni avanzate` +1. Quando vedi la scritta `B9S install SUCCESS` sullo schermo superiore, premi qualunque tasto per avviare la configurazione di Luma #### Sezione IV - Configurare Luma3DS -1. Your device should automatically show the Luma Configuration menu +1. La tua console dovrebbe mostrare autonomamente il menu di configurazione di Luma 1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + **"Show NAND or user string in System Settings"** 1. Premi (Start) per salvare e riavviare il 3DS + La console dovrebbe avviare il menu HOME dopo un po'. Se ottieni uno schermo nero per più di 5 minuti, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -#### Section V - Restoring WiFi Configuration Profiles +#### Sezione V - Ripristino dei Profili di Connessione WiFi 1. Avvia "Impostazioni della console" 1. Entra in `Gestione dati` -> `DSiWare` 1. Clicca sulla sezione Scheda SD - + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off + + Lo schermo inferiore dovrebbe colorarsi di verde per pochi istanti, dopodiché la console si riavvierà nel menu HOME. Questo vuol dire che i profili di connessione WiFi sono stati ripristinati con successo +1. Spegni la tua console 1. Inserisci la scheda SD nel tuo computer 1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) -1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup +1. Elimina il file `F0D43D5.bin` dalla cartella Nintendo DSiWare +1. Prosegui con il Completamento dell'Installazione ___ diff --git a/_pages/it_IT/legacy-methods.txt b/_pages/it_IT/legacy-methods.txt index 37ca9b14ad..36ee411a51 100644 --- a/_pages/it_IT/legacy-methods.txt +++ b/_pages/it_IT/legacy-methods.txt @@ -1,21 +1,21 @@ --- -title: "Legacy Methods" +title: "Metodi Tradizionali" --- {% include toc title="Indice" %} ### Lettura necessaria -There have been multiple improvements and advancements to methods for installing CFW over the last short while. +Nell'ultimo periodo ci sono stati numerosi miglioramenti e avanzamenti ai metodi di installazione di CFW. -For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page. +Per questo motivo, è consigliato usare il metodo più recente descritto nella sezione [Seedminer](seedminer). -However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. +Ciononostante, i metodi "tradizionali", più vecchi, vengono mantenuti qui per vari motivi. Ti servirà comunque aver eseguito precedentemente [Seedminer](seedminer). -If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. +Se ti dovesse servire una mano, puoi entrare nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) e chiedere, in inglese. 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool 1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + DSiWare Dumper + Fredtool - + Pichaxx also has a sub method: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool + + Pichaxx ha anche un metodo alternativo: [Frogtool](installing-boot9strap-(frogtool)): Seedminer + Pichaxx + Frogtool -All of these options should also finish with [Finalizing Setup](finalizing-setup). \ No newline at end of file +Tutte queste opzioni dovrebbero condurre al termine alla sezione [Completamento dell'Installazione](finalizing-setup). \ No newline at end of file diff --git a/_pages/it_IT/seedminer.txt b/_pages/it_IT/seedminer.txt index d5e780600c..7a41b4f2ff 100644 --- a/_pages/it_IT/seedminer.txt +++ b/_pages/it_IT/seedminer.txt @@ -78,17 +78,17 @@ ___ #### Seedminer + unSAFE_MODE -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +Seedminer utilizza il tuo file `movable.sed` per sfruttare gli exploit presenti nel firmware SAFE_MODE presente in ogni console 3DS. Questo metodo è compatibile con tutte le regioni, anche se la regione CHN non è coperta da questa guida. -Continue to [unSAFE_MODE](installing-boot9strap-(usm)) +Prosegui con [unSAFE_MODE](installing-boot9strap-(usm)) {: .notice--primary} ___ -#### Legacy Methods +#### Metodi Tradizionali -These methods are outdated and not recommended unless you have a specific purpose for them, or you have been advised to use them. +Questi metodi sono obsoleti e sconsigliati a meno che tu non abbia uno scopo specifico, o ti sia stato consigliato di utilizzarli. -[Legacy Methods](legacy-methods) \ No newline at end of file +[Metodi Tradizionali](legacy-methods) \ No newline at end of file diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt index 86f4699a76..c7a2e7e9e6 100644 --- a/_pages/it_IT/site-navigation.txt +++ b/_pages/it_IT/site-navigation.txt @@ -9,7 +9,7 @@ sitemap: false + [Completamento dell'installazione](finalizing-setup) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installazione di boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) {% endcapture %}
{{ notice-1 | markdownify }}
@@ -49,12 +49,12 @@ sitemap: false + [Installazione di boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installazione di boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) + [Installazione di boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installazione di boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) + [Spostare l'EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Cambiare regione](region-changing) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) ++ [Metodi Seedminer Tradizionali](legacy-methods) + [Risoluzione dei problemi](troubleshooting) + [Disinstallare il CFW](uninstall-cfw) + [Aggiornare B9S](updating-a9lh) diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt index 6ce09008f6..e62c4a59b1 100644 --- a/_pages/zh_CN/installing-boot9strap-(usm).txt +++ b/_pages/zh_CN/installing-boot9strap-(usm).txt @@ -16,7 +16,7 @@ title: "安装 boot9strap（通过 USM）" 这些操作可在美、欧、日、韩版的主机上工作，你可通过系统版本号末尾的 U，E，J，K 字符来区分主机版本。 -如果你的 L 键、R 键、↑ 键和 A 键中的其中一个按键无法使用，则你需要使用[传统方法](legacy-methods)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 +如果你的 L 键、R 键、↑ 键和 A 键中的其中一个按键坏了无法使用，则你只能使用[传统方法](legacy-methods)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 {: .notice--danger} ### 你需要准备点啥？