diff --git a/_pages/ar_SA/homebrew-launcher-(browserhax-2020).txt b/_pages/ar_SA/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/ar_SA/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ar_SA/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt b/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt index 62fd4bfa66..a42d09cecd 100644 --- a/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ar_SA/installing-boot9strap-(usm).txt b/_pages/ar_SA/installing-boot9strap-(usm).txt index 5a2b82fcde..c3145e91cf 100644 --- a/_pages/ar_SA/installing-boot9strap-(usm).txt +++ b/_pages/ar_SA/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/ar_SA/site-navigation.txt b/_pages/ar_SA/site-navigation.txt index c784c043ab..9c216f68a8 100644 --- a/_pages/ar_SA/site-navigation.txt +++ b/_pages/ar_SA/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/ca_ES/homebrew-launcher-(browserhax-2020).txt b/_pages/ca_ES/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/ca_ES/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ca_ES/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt b/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt index 62fd4bfa66..a42d09cecd 100644 --- a/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ca_ES/installing-boot9strap-(usm).txt b/_pages/ca_ES/installing-boot9strap-(usm).txt index 5a2b82fcde..c3145e91cf 100644 --- a/_pages/ca_ES/installing-boot9strap-(usm).txt +++ b/_pages/ca_ES/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/ca_ES/site-navigation.txt b/_pages/ca_ES/site-navigation.txt index c784c043ab..9c216f68a8 100644 --- a/_pages/ca_ES/site-navigation.txt +++ b/_pages/ca_ES/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/cs_CZ/homebrew-launcher-(browserhax-2020).txt b/_pages/cs_CZ/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/cs_CZ/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/cs_CZ/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt b/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt index 62fd4bfa66..a42d09cecd 100644 --- a/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt +++ b/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/cs_CZ/installing-boot9strap-(usm).txt b/_pages/cs_CZ/installing-boot9strap-(usm).txt index 5a2b82fcde..c3145e91cf 100644 --- a/_pages/cs_CZ/installing-boot9strap-(usm).txt +++ b/_pages/cs_CZ/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/cs_CZ/site-navigation.txt b/_pages/cs_CZ/site-navigation.txt index c784c043ab..9c216f68a8 100644 --- a/_pages/cs_CZ/site-navigation.txt +++ b/_pages/cs_CZ/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/de_DE/homebrew-launcher-(browserhax-2020).txt b/_pages/de_DE/homebrew-launcher-(browserhax-2020).txt index 860ba2f973..487f25a45c 100644 --- a/_pages/de_DE/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/de_DE/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Inhalt" %} - -### Lesen erforderlich - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### Was du brauchst - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Anleitung - -#### Schritt I - Vorbereitungen - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + Solltest du eine Fehlermeldung erhalten, [folge diesen Anweisungen](troubleshooting#a-browser-based-exploit-is-not-working) -1. Wenn der Exploit erfolgreich war, wird der Homebrew Launcher gestartet - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/de_DE/installing-boot9strap-(hbl-usm).txt b/_pages/de_DE/installing-boot9strap-(hbl-usm).txt index 9ed5462c03..a42d09cecd 100644 --- a/_pages/de_DE/installing-boot9strap-(hbl-usm).txt +++ b/_pages/de_DE/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Inhalt" %} - -### Lesen erforderlich - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Was du brauchst - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Schritt I - Vorbereitungen - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Schritt III - Luma3DS konfigurieren - -1. Your device should automatically show the Luma Configuration menu -1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren: - + **"Show NAND or user string in System Settings"** -1. Drücke (Start) zum Speichern und neustarten - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Starte die Download-Spiel Anwendung -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Wähle "Miscellaneous options" -1. Wähle "Switch the hb. title to the current app." -1. Drücke (B) um fortzufahren -1. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren -1. Drücke (B), um das Rosalina-Menü zu schließen -1. Drücke (Home) und schließe die Download-Spiel Anwendung -1. Relaunch the Download Play application -1. Deine Konsole sollte den Homebrew Launcher laden -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Fortfahren mit [Setup fertigstellen](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/de_DE/installing-boot9strap-(usm).txt b/_pages/de_DE/installing-boot9strap-(usm).txt index edea5665c1..f014ba10a2 100644 --- a/_pages/de_DE/installing-boot9strap-(usm).txt +++ b/_pages/de_DE/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Schritt I - Vorbereitungen 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/de_DE/site-navigation.txt b/_pages/de_DE/site-navigation.txt index bfb1d5392e..2a7c6bff92 100644 --- a/_pages/de_DE/site-navigation.txt +++ b/_pages/de_DE/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installation von boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installation von boot9strap (MSET)](installing-boot9strap-(mset)) + [Installation von boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/el_GR/homebrew-launcher-(browserhax-2020).txt b/_pages/el_GR/homebrew-launcher-(browserhax-2020).txt index 520be88417..487f25a45c 100644 --- a/_pages/el_GR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/el_GR/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Πίνακας περιεχομένων" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/el_GR/installing-boot9strap-(hbl-usm).txt b/_pages/el_GR/installing-boot9strap-(hbl-usm).txt index 484597f856..a42d09cecd 100644 --- a/_pages/el_GR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/el_GR/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Πίνακας περιεχομένων" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/el_GR/installing-boot9strap-(usm).txt b/_pages/el_GR/installing-boot9strap-(usm).txt index 3b88fb1f39..8639cae2c2 100644 --- a/_pages/el_GR/installing-boot9strap-(usm).txt +++ b/_pages/el_GR/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/el_GR/site-navigation.txt b/_pages/el_GR/site-navigation.txt index 5dd6b6e89b..8034f5253a 100644 --- a/_pages/el_GR/site-navigation.txt +++ b/_pages/el_GR/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/en_PT/homebrew-launcher-(browserhax-2020).txt b/_pages/en_PT/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/en_PT/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/en_PT/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/en_PT/installing-boot9strap-(hbl-usm).txt b/_pages/en_PT/installing-boot9strap-(hbl-usm).txt index 0699874b2a..a42d09cecd 100644 --- a/_pages/en_PT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/en_PT/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use th' (A) button 'n th' D-Pad to turn on th' followin': - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save 'n reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Ye device should be loadin' th' Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/en_PT/installing-boot9strap-(usm).txt b/_pages/en_PT/installing-boot9strap-(usm).txt index 8b0d59d5f3..207af9907c 100644 --- a/_pages/en_PT/installing-boot9strap-(usm).txt +++ b/_pages/en_PT/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/en_PT/site-navigation.txt b/_pages/en_PT/site-navigation.txt index 67ccdb993d..440a3f2cc2 100644 --- a/_pages/en_PT/site-navigation.txt +++ b/_pages/en_PT/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installin' boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installin' boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/es_ES/homebrew-launcher-(browserhax-2020).txt b/_pages/es_ES/homebrew-launcher-(browserhax-2020).txt index 94109c81ae..487f25a45c 100644 --- a/_pages/es_ES/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/es_ES/homebrew-launcher-(browserhax-2020).txt @@ -2,54 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Tabla de contenidos" %} - -### Lectura requerida - -Este método para acceder al Homebrew Launcher se aprovecha de algunos problemas pasados por alto en el Navegador de Internet nativo de la 3DS. - -Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema. Si tienes una consola de región China o Taiwán (indicado por las letras T o C después de la versión del sistema), entra al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) y pide a alguien que te ayude, en Inglés. - -### Qué necesitas - -* La última versión del [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La última versión de BrowserHax [[para Old 3DS] (https://github.com/zoogie/old-browserhax/releases/latest) / [para New 3DS] (https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old se refiere al modelo de tu consola. Si no sabes cuál modelo tienes, consulta [esta imagen] -(https://3ds.eiphax.tech/pic/newold.png) -* Una conexión WiFi activa en tu consola - -### Instrucciones - -#### Sección I - Preparativos - -1. Apaga la consola y retira la tarjeta SD -1. Inserta la tarjeta SD en tu computadora -1. Copia `boot.3dsx` del archivo de Homebrew Launcher a la raíz de tu tarjeta SD - + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella -1. En el archivo de BrowserHax que descargaste, abre la carpeta correspondiente a la región de tu consola - + La región de tu consola se puede determinar con la última letra de la versión del sistema en Configuración de la Consola: U es América, E es Europa, J es Japón y K es Corea -1. Copia la carpeta `3ds` y los archivos `browserhax_hblauncher_ropbin_payload.bin` y `arm11code.bin` al directorio raíz de tu tarjeta SD - + Ahora debería haber una carpeta llamada `Nintendo 3DS`, otra llamada `3ds` y los dos archivos `.bin` en la raíz de tu tarjeta SD - -### Sección II - BrowserHax - -1. Abre [esta imagen](https://3ds.eiphax.tech/pic/hax.png) en una nueva pestaña o ventana de tu computadora -1. Extrae la tarjeta SD de forma segura de la computadora y ponla de vuelta en la consola -1. Enciende tu consola y asegúrate de estar conectado a una red WiFi activa -1. Desde el menú HOME, presiona el gatillo izquierdo y el derecho al mismo tiempo (L y R) - + Esto debería abrir un escáner de QR. Si no abre un escáner de QR, USM (la próxima parte de instalar CFW) no funcionará para ti. Necesitarás usar [Seedminer](seedminer) - + Si necesitas escribir el URL, es `https://zoogie.github.io/web/nbhax/` -1. Usa el código QR para escanear el código que abriste en el primer paso -1. Pulsa el botón "PROCEED TO HAXX" -1. Espera a que el proceso se complete - + Si la pantalla se queda en amarillo, apaga tu consola y vuelve a intentar esta sección - + Si te sale un error, sigue la [guía de solución de problemas](troubleshooting#a-browser-based-exploit-is-not-working) -1. Si el exploit fue exitoso, tu consola habrá cargado el Homebrew Launcher - + Si ves un error indicando que no se encontraron aplicaciones, asegúrate de que has copiado la carpeta `3ds` del archivo de BrowserHax a la raíz de tu tarjeta SD, después vuelve a intentar esta sección -1. Deja la consola encendida y prosigue con la siguiente sección - - -___ - -### Continúa en [Instalar boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/es_ES/installing-boot9strap-(hbl-usm).txt b/_pages/es_ES/installing-boot9strap-(hbl-usm).txt index 7b8ed3ba35..9169a3186d 100644 --- a/_pages/es_ES/installing-boot9strap-(hbl-usm).txt +++ b/_pages/es_ES/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Instalar boot9strap (USM)" --- -{% include toc title="Tabla de contenidos" %} - -### Lectura requerida - -Para poder aprovechar el exploit del firmware SAFE_MODE de la consola, necesitamos inyectar un perfil de WiFi con el exploit. - -Como ya tenemos acceso a Homebrew, podemos utilizar slotTool para hacerlo. - -Este método en específico está pensado para ser utilizado con acceso al Homebrew Launcher a través de [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -Si tienes acceso al Homebrew Launcher a través de otro punto de entrada, debes utilizar [Frogtool](installing-boot9strap-(frogtool)). - -Una vez que el perfil de WiFi ha sido inyectado, usaremos SAFE_MODE, que consiste en una función de recuperación presente en todas las consolas, para activar el perfil de WiFi con el exploit. - -Si tus botones (Right/Left Shoulder), (D-Pad arriba) o (A) no funcionan, deberás utilizar un [Método antiguo](legacy-methods). Para ayuda con este asunto, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedir, en inglés, que te ayuden. -{: .notice--danger} - -### Qué necesitas - -* La ultima versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La ultima versión de [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Sección I - Preparativos - -1. Tu consola debería estar encendida y mostrando la pantalla del Homebrew Launcher, de la parte anterior de la guía -1. Inicia slotTool desde la lista de homebrew - + Si te quedas atascado en una pantalla roja, fuerza el apagado de la consola manteniendo pulsado el botón de encendido durante 15 segundos e intenta de nuevo esta sección -1. Selecciona la opción "INSTALL exploit to wifi slots 1,2,3 & shutdown" - + Verás algo de texto en pantalla y luego la consola se apagará -1. Extrae la tarjeta SD de la consola y conéctala en la computadora -1. Copia el archivo `boot.firm` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD -1. Copia el archivo `usm.bin` desde el `.zip` de unSAFE_MODE a la raíz de tu tarjeta SD -1. Reinserta la tarjeta SD en tu consola - -#### Sección II - unSAFE_MODE - -1. Con tu consola aún apagada, mantén pulsados los siguientes botones: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), luego presiona (Power) - + Mantén pulsados los botones hasta que la consola encienda en modo seguro -1. Presiona "OK" para aceptar la actualización - + No hay actualización. Esto es parte del exploit -1. Presiona "Acepto" para aceptar los términos y condiciones -1. La actualización fallará, con el código de error `003-1099`. Este comportamiento es el esperado -1. Cuando se te pregunte "¿Quieres configurar tu conexión a internet?", presiona "Aceptar" -1. En el menú siguiente, navega a `Conexión 1` -> `Modificar ajustes` -> `Siguiente página (flecha derecha)` -> `Servidor proxy` -> `Ajustes avanzados` - + Aquí hay una [representación visual](https://uwuu.ca/images/safemode_highlighted.png) -1. Una vez que veas `B9S install SUCCESS` en la pantalla superior, presiona cualquier botón para reiniciar a la configuración de Luma - -#### Sección III - Configuración de Luma3DS - -1. Tu consola debería mostrar automáticamente el menú de configuración de Luma -1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: - + **"Show NAND or user string in System Settings"** -1. Presiona (Start) para guardar y reiniciar - + Tu consola deberá cargar el Menú HOME después de un breve momento. Si la pantalla se queda en negro por más de 5 minutos, [sigue la guía de solución de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Sección IV - Restaurando los Perfiles de Configuración de Red Inalámbrica - -1. Inicia la aplicación de Modo Descarga -1. Espera hasta que veas los dos botones - + No presiones ninguno de los botones -1. Presiona (Left Shoulder) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina -1. Selecciona "Miscellaneous options" -1. Selecciona "Switch the hb. title to the current app." -1. Presiona (B) para continuar -1. Presiona (B) para regresar al menú principal de Rosalina -1. Presiona (B) para salir del menú de Rosalina -1. Presiona (Home), luego cierra la aplicación de Modo Descarga -1. Inicia la aplicación de Modo Descarga otra vez -1. Tu consola debería cargar el Homebrew Launcher -1. Inicia slotTool desde la lista de homebrew -1. Selecciona "RESTORE original wifi slots 1,2,3" -1. Tu consola se reiniciará - -___ - -### Continúa en [Finalizar instalación](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/es_ES/installing-boot9strap-(usm).txt b/_pages/es_ES/installing-boot9strap-(usm).txt index 36941e1a29..f3d3129582 100644 --- a/_pages/es_ES/installing-boot9strap-(usm).txt +++ b/_pages/es_ES/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ Si tus botones (Right/Left Shoulder), (D-Pad arriba) o (A) no funcionan, deberá #### Sección I - Preparativos 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Carga tu movable.sed usando la opción "Choose File" 1. Haz clic en "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/es_ES/site-navigation.txt b/_pages/es_ES/site-navigation.txt index ad113d2da9..1889555ba3 100644 --- a/_pages/es_ES/site-navigation.txt +++ b/_pages/es_ES/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Instalar boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Instalar boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Instalar boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Instalar boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Instalar boot9strap (MSET)](installing-boot9strap-(mset)) + [Instalar boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Instalar boot9strap (SafeB9SInstaller)](installing-boot9strap-(Safeb9sInstaller)) diff --git a/_pages/fi_FI/homebrew-launcher-(browserhax-2020).txt b/_pages/fi_FI/homebrew-launcher-(browserhax-2020).txt index 4a6a8f0df0..487f25a45c 100644 --- a/_pages/fi_FI/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/fi_FI/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Sisällysluettelo" %} - -### Tärkeää tietoa - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### Tarpeet - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Ohjeet - -#### Vaihe I – Valmistelut - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + Jos saat virheen, [seuraa tätä vianmääritysohjetta](troubleshooting#selainpohjainen-käynnistystapa-ei-toimi) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt b/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt index 06d4a7cdf4..a42d09cecd 100644 --- a/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt +++ b/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Sisällysluettelo" %} - -### Tärkeää tietoa - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Tarpeet - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Vaihe I – Valmistelut - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Vaihe III – Luma3DS:n määrittäminen - -1. Your device should automatically show the Luma Configuration menu -1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön: - + **"Show NAND or user string in System Settings"** -1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Avaa Download Play -sovellus -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Valitse "Miscellaneous options" -1. Valitse "Switch the hb. title to the current app." -1. Paina (B):tä jatkaaksesi -1. Paina (B):tä palataksesi Rosalinan päävalikkoon -1. Paina (B):tä poistuaksesi Rosalina-valikosta -1. Paina (HOME)-painiketta ja sulje Download Play -1. Relaunch the Download Play application -1. Konsolisi pitäisi avata Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Jatka osioon [Asennuksen viimeistely](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/fi_FI/installing-boot9strap-(usm).txt b/_pages/fi_FI/installing-boot9strap-(usm).txt index cb7081a864..c632d2501e 100644 --- a/_pages/fi_FI/installing-boot9strap-(usm).txt +++ b/_pages/fi_FI/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Vaihe I – Valmistelut 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/fi_FI/site-navigation.txt b/_pages/fi_FI/site-navigation.txt index 95863cd6c7..a6612fe4a1 100644 --- a/_pages/fi_FI/site-navigation.txt +++ b/_pages/fi_FI/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Boot9strapin asentaminen (laitteistomodaus)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Boot9strapin asentaminen (MSET)](installing-boot9strap-(mset)) + [Boot9strapin asentaminen (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/fr_FR/homebrew-launcher-(browserhax-2020).txt b/_pages/fr_FR/homebrew-launcher-(browserhax-2020).txt index 00a1a885ae..d24544d313 100644 --- a/_pages/fr_FR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/fr_FR/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table des matières" %} - -### Lecture requise - -Cette méthode d'accès au Homebrew Launcher se sert de failles dans le Navigateur Internet 3DS natif. - -Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée indiquées par les lettres U, E, J ou K après le numéro de version de la console. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -## Ce dont vous avez besoin - -* La dernière version de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La dernière version de BrowserHax [[pour Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [pour New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old représente le modèle de votre console. Si vous n'êtes pas sûr du modèle que vous possédez, référez vous à [cette image](https://3ds.eiphax.tech/pic/newold.png) -* Une connexion Wi-Fi fonctionnelle sur votre console - -### Instructions - -#### Section I - Préparatifs - -1. Éteignez votre console et retirez la carte SD -1. Insérez la carte SD dans votre ordinateur -1. Copiez `boot.3dsx` depuis la release du Homebrew Launcher à la racine de la carte SD - + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier -1. Dans l'archive de BrowserHax, ouvrez le dossier correspondant à la région de votre console - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copiez le dossier `3ds`, `browserhax_hblauncher_ropbin_payload.bin` et `arm11code.bin` vers la racine de votre carte SD - + Vous devriez maintenant avoir un dossier `Nintendo 3DS`, un dossier `3ds` et les deux fichiers `.bin` sur la racine de votre carte SD - -#### Section II - BrowserHax - -1. Ouvrez [cette image](https://3ds.eiphax.tech/pic/hax.png) dans un nouvel onglet ou fenêtre sur votre ordinateur -1. Éjectez en toute sécurité votre carte SD de votre ordinateur et remettez-la dans votre console -1. Allumez votre console et assurez-vous qu'elle est connectée à un réseau Wi-Fi fonctionnel -1. Sur le menu HOME, appuyez sur la gâchette gauche (L) et la gâchette droite (R) en même temps - + Cela devrait ouvrir le lecteur de QR code. Si ce n'est pas le cas, USM (la partie suivante de l'installation du custom firmware) ne fonctionnera pas. You will need to use [Seedminer](seedminer) - + Si vous avez besoin de saisir l'URL, la voici `https://zoogie.github.io/web/nbhax/` -1. Utilisez le lecteur de QR code pour scanner le QR code ouvert précédemment à la première étape -1. Appuyez sur le bouton "PROCEED TO HAXX" -1. Attendez la fin de l'opération - + Si vous obtenez un écran jaune, éteignez votre console et réessayez cette section encore une fois - + Si vous rencontrez une autre erreur, [suivez ce guide de dépannage](troubleshooting#a-browser-based-exploit-is-not-working) -1. Si l'exploit a réussi, votre console devrait avoir démarré l'Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Laissez votre console allumée et passez à la section suivante ci-dessous - - -___ - -### Continuer vers [Installation de boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +Cette page a été supprimée car la méthode utilisée est obsolète. Veuillez suivre une méthode plus récente trouvable sur la page [Bien Démarrer](get-started). +{: .notice--warning} diff --git a/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt b/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt index 47b7ce2518..cc12fddca9 100644 --- a/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installation de boot9strap (HBL-USM)" --- -{% include toc title="Table des matières" %} - -### Lecture requise - -Afin d'exploiter le firmware SAFE_MODE de notre console, nous devons injecter un profil Wi-Fi exploité. - -Comme nous avons déjà un accès Homebrew, nous pouvons utiliser slotTool pour faire cela. - -Cette méthode spécifique est destinée à être utilisée avec l'accès au Homebrew Launcher via [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -Si vous avez un accès à l'Homebrew Launcher via un autre point d'entrée, vous devriez utiliser [Frogtool](installing-boot9strap-(frogtool)). - -Une fois le profil WiFi injecté, nous utiliserons SAFE_MODE, qui est une fonctionnalité de récupération présente sur toutes les consoles 3DS, pour activer le profil WiFi exploité. - -Si vos boutons (L/R), (Haut sur la croix directionnelle) ou (A) ne fonctionnent pas, vous devrez utiliser une [Ancienne Méthode](legacy-methods). Pour obtenir de l'aide, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide en anglais. -{: .notice--danger} - -## Ce dont vous avez besoin - -* Le fichier zip de la dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Le fichier zip de la dernière version de [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Préparatifs - -1. Votre console devrait être allumée et montrer le Homebrew Launcher de la partie précédente du guide -1. Lancez slotTool depuis la liste des homebrews - + Si vous êtes coincé sur un écran rouge, éteignez la console de manière forcée en maintenant le bouton d'alimentation enfoncé pendant quinze secondes, puis recommencez les étapes de cette section -1. Sélectionnez l'option "INSTALL exploit to wifi slots 1,2,3 & shutdown" - + Vous verrez du texte à l'écran et votre console s'éteindra -1. Retirez la carte SD de votre console et insérez-la dans votre ordinateur -1. Copiez `boot.firm` du fichier `.zip` de Luma3DS vers la racine de votre carte SD -1. Copiez `usm.bin` de l'archive unSAFE_MODE `.zip` vers la racine de votre carte SD -1. Réinsérez la carte SD dans votre console - -#### Section II - unSAFE_MODE - -1. Votre console toujours éteinte, maintenez enfoncé les boutons suivants : (L) + (R) + (Haut sur la croix directionnelle) + (A), puis appuyez sur (Power) - + Maintenez les boutons enfoncés jusqu'à ce que la console démarre en mode sans échec -1. Appuyez sur "OK" pour accepter la mise à jour - + Aucune mise à jour nécessaire. Ceci fait partie de l'exploit -1. Appuyez sur « J'accepte » pour accepter les termes et conditions -1. La mise à jour finira par échouer, avec le code d'erreur `003-1099`. Ne vous inquiétez pas, c'est normal -1. Lorsque votre console vous demande "Paramétrer la connexion Internet de la console ?", sélectionnez "Paramétrer" -1. Dans le menu suivant, accédez à `Connexion 1` -> `Modifier` -> `Page suivante (flèche de droite)` -> `Serveur proxy` -> `Paramètres avancés` - + Voici une [représentation visuelle](https://uwuu.ca/images/safemode_highlighted.png) -1. Une fois que vous voyez `B9S install SUCCESS` sur l'écran du haut, appuyez sur n'importe quel bouton pour redémarrer sur le menu de configuration de Luma - -#### Section III - Configuration de Luma3DS - -1. Votre console devrait afficher automatiquement le menu de configuration de Luma -1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants: - + **"Show NAND or user string in System Settings"** -1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer - + Votre console devrait afficher le Menu HOME après un court instant. Si vous avez un écran noir depuis plus de 5 minutes, [suivez ce guide de dépannage](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restauration des profils de connexion Wi-Fi - -1. Lancez l’application Mode téléchargement -1. Attendez jusqu'à ce que vous voyiez les deux boutons - + N'appuyez sur aucun des deux boutons -1. Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina -1. Sélectionnez "Miscellaneous options" -1. Sélectionnez "Switch the hb. title to the current app." -1. Appuyez sur (B) pour continuer -1. Appuyez sur (B) pour revenir au menu principal de Rosalina -1. Appuyez sur (B) pour quitter le menu Rosalina -1. Appuyez sur (Home), puis fermez Mode téléchargement -1. Relancez l’application Mode téléchargement -1. Votre console devrait maintenant charger le Homebrew Launcher -1. Lancez slotTool depuis la liste des homebrews -1. Sélectionnez "RESTORE original wifi slots 1,2,3" -1. Votre console va alors redémarrer - -___ - -### Continuer vers [Finalisation de l'installation](finalizing-setup) -{: .notice--primary} +Cette page a été supprimée car la méthode utilisée est obsolète. Veuillez suivre une méthode plus récente trouvable sur la page [Bien Démarrer](get-started). +{: .notice--warning} diff --git a/_pages/fr_FR/installing-boot9strap-(usm).txt b/_pages/fr_FR/installing-boot9strap-(usm).txt index e88cf1f351..af6d44c09c 100644 --- a/_pages/fr_FR/installing-boot9strap-(usm).txt +++ b/_pages/fr_FR/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ Si vos boutons (L/R), (Haut sur la croix directionnelle) ou (A) ne fonctionnent #### Section I - Préparatifs 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Téléchargez votre movable.sed en utilisant l'option "Choisir le fichier" 1. Cliquez sur "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/fr_FR/site-navigation.txt b/_pages/fr_FR/site-navigation.txt index ac81e9a1fd..8eb84402a1 100644 --- a/_pages/fr_FR/site-navigation.txt +++ b/_pages/fr_FR/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installation de boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installation de boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installation de boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installation de boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installation de boot9strap (MSET)](installing-boot9strap-(mset)) + [Installation de boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installation de boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/he_IL/homebrew-launcher-(browserhax-2020).txt b/_pages/he_IL/homebrew-launcher-(browserhax-2020).txt index b2ebe28676..487f25a45c 100644 --- a/_pages/he_IL/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/he_IL/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="תוכן העניינים" %} - -### קריאה דרושה - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### הנחיות - -#### חלק I - הכנות - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + אם אתם מקבלים שגיאה, [עקבו אחרי המדריך הבא](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/he_IL/installing-boot9strap-(hbl-usm).txt b/_pages/he_IL/installing-boot9strap-(hbl-usm).txt index 2c0e5602f7..a42d09cecd 100644 --- a/_pages/he_IL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/he_IL/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="תוכן העניינים" %} - -### קריאה דרושה - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### חלק I - הכנות - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### חלק III - הגדרת Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות: - + **"Show NAND or user string in System Settings"** -1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. תפעילו את Download Play -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. תבחרו ב "Miscellaneous options" -1. תבחרו ב "Switch the hb. title to the current app." -1. תלחצו (B) כדי להמשיך -1. תלחצו (B) כדי לחזור לתפריט הראשי של Rosalina -1. תלחצו (B) כדי לצאת מהתפריט של Rosalina -1. תלחצו על (Home), ואז תסגרו את Download Play -1. Relaunch the Download Play application -1. המכשיר שלכם אמור לטעון את הHomebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/he_IL/installing-boot9strap-(usm).txt b/_pages/he_IL/installing-boot9strap-(usm).txt index 726912a9e0..391ccaee67 100644 --- a/_pages/he_IL/installing-boot9strap-(usm).txt +++ b/_pages/he_IL/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### חלק I - הכנות 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/he_IL/site-navigation.txt b/_pages/he_IL/site-navigation.txt index f0b69091c1..e12465cd77 100644 --- a/_pages/he_IL/site-navigation.txt +++ b/_pages/he_IL/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [התקנת boot9strap (הלחמה)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [התקנת boot9strap (MSET)](installing-boot9strap-(mset)) + [התקנת boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/hr_HR/homebrew-launcher-(browserhax-2020).txt b/_pages/hr_HR/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/hr_HR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/hr_HR/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt b/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt index 62fd4bfa66..a42d09cecd 100644 --- a/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/hr_HR/installing-boot9strap-(usm).txt b/_pages/hr_HR/installing-boot9strap-(usm).txt index 5a2b82fcde..c3145e91cf 100644 --- a/_pages/hr_HR/installing-boot9strap-(usm).txt +++ b/_pages/hr_HR/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/hr_HR/site-navigation.txt b/_pages/hr_HR/site-navigation.txt index c784c043ab..9c216f68a8 100644 --- a/_pages/hr_HR/site-navigation.txt +++ b/_pages/hr_HR/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/hu_HU/homebrew-launcher-(browserhax-2020).txt b/_pages/hu_HU/homebrew-launcher-(browserhax-2020).txt index 5c5d09eead..f65b72f178 100644 --- a/_pages/hu_HU/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/hu_HU/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Tartalomjegyzék" %} - -### Fontos tudnivalók - -Ez a metódusa a Homebrew launcer elérésnek kihasználja a natív 3DS Internet Browser hiányosságait. - -Ezek az utasítások az Amerikai, Európai, Japán és Koreai régiójú konzolokon működnek, amik a rendszer verzió mögött egy U, E, J vagy K betű jelöl. Ha Taiwan vagy China régiós konzolod van, amit T vagy C jelöl a rendszer verzió után, akkor csatlakozz a [Nintendo Homebrew Discord csatornájára](https://discord.gg/MWxPgEp) és kérj angol nyelven segítséget. - -### Amire szükséged lesz - -* A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) legújabb kiadása -* BrowserHax legutolsó verziójára [[Old 3DS-hez](https://github.com/zoogie/old-browserhax/releases/latest) / [New 3DS-hez](https://github.com/zoogie/new-browserhax/releases/latest)] - + A New/Old az a konzol modelljét jelenti. Ha nem vagy biztos abban, milyen modell van neked, határozd meg [ezen kép alapján](https://3ds.eiphax.tech/pic/newold.png) -* Aktív WiFi csatlakozás a konzolján - -### Lépések - -#### I. rész - Előkészületek - -1. Kapcsold ki a konzolod és vedd ki belőle az SD kártyád -1. Csatlakoztasd az SD kártyát a számítógéphez -1. Másold át a `boot.3dsx` fájlt a Homebrew Launcher kiadásból az SD kártya gyökerébe - + Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne -1. A BrowserHax release-ben nyisd meg a konzolod régiójához tartozó könyvtárt - + A konzolod régiója az utolsó betűje a verziószámnak a System Settings-ben: U az USA, E az EUROPA, J a JAPAN, és K a KOREA -1. Másold a `3ds` mappát és a `browserhax_hblauncher_ropbin_payload.bin` és az `arm11code.bin` fájlokat innen az SD kártya gyökerébe - + Most már kell lenni egy `Nintendo 3DS` mappának, egy `3ds` mappának és két `.bin` fájlnak a gyökér könyvtárban - -#### II. szakasz - BrowserHax - -1. Nyisd meg [ezt a képet](https://3ds.eiphax.tech/pic/hax.png) egy új fülön vagy ablakban a számítógépen -1. Válaszd le biztonságosan az SD kártyát a számítógépről és rakd vissza a konzolodba -1. Kapcsold be a konzolt, és ellenőrizd, hogy csatlakozik az aktív WiFi hálózathoz -1. A Home menüben nyomd meg az [L] és [R] billentyűket egyszerre - + Ez megnyitja a QR Scanner-t. Ha nem így történik az USM (a következő része az egyéni firmware beszerzésének) nem fog működni. Szükséged lesz a [Seedminer](seedminer) használatára - + Ha ki kell írnod az URL-t az a következő: `https://zoogie.github.io/web/nbhax/` -1. Olvasd le a QR olvasóval a QR kódot, amit az első pontban nyitottál meg -1. Nyomj a "PROCEED TO HAXX" gombra -1. Várd meg, amíg a folyamat befejeződik - + Ha egy sárga képernyőt mutat, kapcsold ki a konzolod, és próbáld újra ezt a szakaszt - + Ha hibát kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#a-browser-based-exploit-is-not-working) -1. Ha az exploit sikeres volt, a készülékednek ezt követően be kell töltenie a Homebrew Launchert - + Ha egy olyan hibát lát, ami azt mondja, hogy nem találhatók alkalmazások, ellenőrizze, hogy a `3ds` mappát a BrowserHax kiadás csomagból az SD kártya gyökerébe másolta, és próbálja meg ezt a szakaszt újra -1. Hagyd bekapcsolva a konzolt és végezd el a következő szakasz lépéseit - - -___ - -### Továbblépés a [Boot9strap telepítésére (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +Ez az oldal el lett távolítva, mert a használlt módszer már elavult. Kérlek használj egy modern módszert a [Kezdeti Lépések](get-started) oldalról. +{: .notice--warning} diff --git a/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt b/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt index 2a1676e8f3..d83f140efc 100644 --- a/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt +++ b/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Boot9strap telepítése (HBL-USM)" --- -{% include toc title="Tartalomjegyzék" %} - -### Fontos tudnivalók - -Ahhoz, hogy a SAFE_MODE-ot exploitálhassuk, be kell injektálnunk egy exploitált WiFi profilt. - -Mivel már van Homebrew hozzáférésünk, használhatjuk a slotTool-t erre a célra. - -Ez a specifikus metódus javasolt a Homebrew Launcher történő használatához, [BrowserHax 2020](homebrew-launcher-(browserhax-2020)) keresztül. - -Ha Homebrew Launcher hozzáférésed egy másik belépési ponton keresztül van, akkor a [Frogtool](installing-boot9strap-(frogtool))-t kell használnod. - -Amint a WiFi profil injektálásra került, a SAFE_MODE-ot fogjuk használni, ami egy helyreállítás szolgáltatás, ami elérhető minden 3DS konzolon, hogy aktiválja az exploitolt WiFi profilt. - -Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek, egy [Legacy metódust](legacy-methods) kell használnod. Ha támogatásra van szükséged az anyaggal kapcsolatosan, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, angolul, támogatást. -{: .notice--danger} - -### Amire szükséged lesz - -* A [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) legújabb kiadása -* A [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) legújabb kiadása - -#### I. rész - Előkészületek - -1. A konzolodnak bekapcsoltnak kell lennie, és a Homebrew Launchert mutatnia az előző rész alapján -1. Indítsa el a slotTool-t a homebrew listából - + Ha beragadsz a piros képernyőn, kapcsold ki erőltetve a konzolod a bekapcsoló gombjának 15 másodpercig nyomva tartásával, majd próbáld meg újra ezt a részt -1. Válaszd az "INSTALL exploit to wifi slots 1,2,3 & shutdown" opciót - + Ezt követően néhány szöveget fogsz látni a képernyőn, majd a rendszer leáll -1. Távolítsd el az SD kártyád a konzolodból és csatlakoztasd a számítógépedhez -1. Másold át a `boot.firm` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe -1. Másold át a `usm.bin` fájlt az unSAFE_MODE `.zip`-ből az SD kártya gyökerébe -1. Tedd vissza az SD kártyád a készülékedbe - -#### II. szakasz - unSAFE_MODE - -1. Az eszközöd kikapcsolt állapotában tartsd nyomva a következő gombokat: (Bal Váll) + (Jobb Váll) + (D-Pad Fel) + (A), majd nyomd meg a (Power)-t - + Tartsd nyomva a gombokat, amiíg a konzol be nem bootol a Safe Mode-ba -1. Nyomj "OK"-ot a frissítés elfogadásához - + Nincs frissítés. Ez része az exploitnak -1. Nyomj az "I accept"-re a feltételek elfogadásához -1. A frissítés sikertelen lesz a `003-1099` hibakóddal. Ez az elvárt viselkedés -1. Amikor megkérdezésre kerül, hogy "Would you like to configure Internet settings?", válassz "Yes"-t -1. A következő menüben navigálj a `Connection 1` -> `Change Settings` -> `Next Page (jobb nyíl)` -> `Proxy Settings` -> `Detailed Setup` menüponthoz - + Itt egy [vizuális reprezentáció](https://uwuu.ca/images/safemode_highlighted.png) -1. Amint azt látod a felső képernyőn, hogy `B9S install SUCCESS` nyomj meg egy billentyűt az Luma Configuration-ba rebootoláshoz - -#### III. rész - Luma3DS konfigurálása - -1. Az eszközöd automatikusan meg kell mutassa a Luma Configuration menüt -1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: - + **"Show NAND or user string in System Settings"** -1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot - + Az eszközödnek kis várakozás után be kell töltenie a Home menüt. Ha fekete képernyőt kapsz, ami több mint 5 percig tart, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### IV. rész - A WiFi Configuration Profiles visszaállítása - -1. Indítsd el a Download Play alkalmazást -1. Várj, amíg két gombot nem látsz - + Ne nyomd meg egyiket sem -1. Nyomd le az (L) + (D-Pad le) + (Select) gombokat egyszerre a Rosalina menü megnyitásához -1. Válaszd ki a "Miscellaneous options"-t -1. Válaszd a "Switch the hb. title to the current app." opciót -1. Nyomd meg a (B) gombot a folytatáshoz -1. Nyomd meg a (B) gombot, hogy visszakerülj a Rosalina főmenüjébe -1. Nyomd meg a (B) gombot, hogy kilépj a Rosalina menüből -1. Nyomd meg a (Home) gombot és zárd be a Download Play-t -1. Indítsd el újra a Download Play alkalmazást -1. Ekkor a készülékednek be kell töltenie a Homebrew Launchert -1. Indítsd el a slotTool-t a homebrew listából -1. Válaszd a "RESTORE original wifi slots 1,2,3" opciót -1. Az eszközöd újra fog indulni - -___ - -### Tovább a [telepítés véglegesítésére](finalizing-setup) -{: .notice--primary} +Ez az oldal el lett távolítva, mert a használlt módszer már elavult. Kérlek használj egy modern módszert a [Kezdeti Lépések](get-started) oldalról. +{: .notice--warning} diff --git a/_pages/hu_HU/installing-boot9strap-(usm).txt b/_pages/hu_HU/installing-boot9strap-(usm).txt index 43cca128c2..4ec7714a4a 100644 --- a/_pages/hu_HU/installing-boot9strap-(usm).txt +++ b/_pages/hu_HU/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek, egy [Legacy #### I. rész - Előkészületek 1. Ha a konzolod be van kapcsolva, most kapcsold ki -1. Nyisd meg az [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) oldalt a számítógépeden +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Töltsd fel a `movable.sed` fájlod a "Choose File" opcióval 1. Kattints a "Download unSAFE_MODE-bb3 archive"-ra + Ez letölt egy exploit DSiWare-t `F00D43D5.bin` néven és egy SAFE_MODE exploit adatfájlt `usm.bin` néven egy zip mappán belül (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/hu_HU/site-navigation.txt b/_pages/hu_HU/site-navigation.txt index 3d7dc88d1e..7746058b51 100644 --- a/_pages/hu_HU/site-navigation.txt +++ b/_pages/hu_HU/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Boot9strap telepítése (Fredtool)](installing-boot9strap-(fredtool)) + [Boot9strap telepítése (Frogtool)](installing-boot9strap-(frogtool)) + [Boot9strap telepítése (Hardmod)](installing-boot9strap-(hardmod)) -+ [Boot9strap telepítése (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Boot9strap telepítése (MSET)](installing-boot9strap-(mset)) + [Boot9strap telepítése (ntrboot)](installing-boot9strap-(ntrboot)) + [Boot9strap telepítése (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt b/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt index 62fd4bfa66..a42d09cecd 100644 --- a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt +++ b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/id_ID/installing-boot9strap-(usm).txt b/_pages/id_ID/installing-boot9strap-(usm).txt index 5a2b82fcde..c3145e91cf 100644 --- a/_pages/id_ID/installing-boot9strap-(usm).txt +++ b/_pages/id_ID/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/id_ID/site-navigation.txt b/_pages/id_ID/site-navigation.txt index c784c043ab..9c216f68a8 100644 --- a/_pages/id_ID/site-navigation.txt +++ b/_pages/id_ID/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt b/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt index 70d791a283..6d4628358d 100644 --- a/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Indice" %} - -### Lettura necessaria - -Questo metodo di accesso all'Homebrew Launcher si avvale di alcune sviste nel Browser Internet nativo del 3DS. - -Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo. Se hai una console di regione Taiwan o Cina, indicate dalle lettere T o C in fondo alla versione del sistema, [entra nel canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) e chiedi aiuto in inglese. - -### Cosa serve - -* L'ultima versione di [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* L'archivio dell'ultima versione di BrowserHax [[per Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [per New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old indica il modello della tua console. Se non sei sicuro di quale modello hai, consulta [questa immagine](https://3ds.eiphax.tech/pic/newold.png) -* Una connessione WiFi attiva sulla tua console - -### Istruzioni - -#### Sezione I - Preparazione - -1. Spegni la tua console e rimuovi la scheda SD -1. Inserisci la scheda SD nel tuo computer -1. Copia il file `boot.3dsx` dai file scaricati dell'Homebrew Launcher nella directory principale della tua scheda SD - + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno -1. Nell'archivio di BrowserHax, apri la cartella corrispondente alla regione della tua console - + La regione della tua console è indicata con la lettera finale della versione di sistema in Impostazioni della console: U è USA, E è EUROPA, J è GIAPPONE e K è COREA -1. Copia la cartella `3ds` e i file `browserhax_hblauncher_ropbin_payload.bin` e `arm11code.bin` qui presenti nella directory principale della tua scheda SD - + Ora dovresti avere una cartella `Nintendo 3DS`, una cartella `3ds` e i due file `.bin` nella directory principale della scheda SD - -#### Sezione II - BrowserHax - -1. Apri [questa immagine](https://3ds.eiphax.tech/pic/hax.png) in una nuova scheda o finestra sul tuo computer -1. Rimuovi in modo sicuro la scheda SD dal computer e reinseriscila nella console -1. Accendi la tua console e assicurati che sia connessa a una rete WiFi attiva -1. Dal menu HOME premi contemporaneamente i pulsanti L e R - + Dovrebbe avviarsi lo Scanner QR. In caso contrario, USM (la parte successiva per l'avvio del custom firmware) non potrà funzionare. Dovrai usare [Seedminer](seedminer) - + Se devi digitare l'URL, è `https://zoogie.github.io/web/nbhax/` -1. Usa lo scanner QR per scansionare il codice QR aperto nel primo passo -1. Tocca il pulsante "PROCEED TO HAXX" -1. Attendi il termine del processo - + Se appare uno schermo giallo, spegni la console dopodiché ritenta questa sezione - + Se ottieni un errore, [segui questa guida per risolvere il problema](troubleshooting#a-browser-based-exploit-is-not-working) -1. Se l'exploit ha avuto successo, la tua console avrà caricato l'Homebrew Launcher - + Se ricevi un errore che indica che non sono state trovate applicazioni, assicurati di aver copiato la cartella `3ds` dall'archivio di BrowserHax nella directory principale della tua scheda SD, quindi riprova questa sezione -1. Lascia la console accesa e procedi alla sezione successiva indicata qui sotto - - -___ - -### Prosegui con l'[Installazione di boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +Questa pagina è stata rimossa perché il metodo utilizzato è obsoleto. Utilizza un metodo più recente indicato alla pagina [Cominciamo!](get-started). +{: .notice--warning} diff --git a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt index 0b39b9e2ce..5180468abf 100644 --- a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installazione di boot9strap (HBL-USM)" --- -{% include toc title="Indice" %} - -### Lettura necessaria - -Per sfruttare il firmware SAFE_MODE del nostro sistema, dobbiamo iniettare un profilo di connessione WiFi modificato. - -Poiché abbiamo già accesso agli Homebrew, possiamo approfittare di slotTool. - -Questo specifico metodo è destinato all'utilizzo con l'accesso all'Homebrew Launcher tramite [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -Se hai accesso all'Homebrew Launcher tramite un altro metodo, dovresti usare [Frogtool](installing-boot9strap-(frogtool)). - -Una volta inserito il profilo WiFi utilizzeremo SAFE_MODE, una funzionalità di ripristino presente su ogni console 3DS, per attivare il profilo WiFi modificato. - -Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Obsoleto](legacy-methods). In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp). -{: .notice--danger} - -### Cosa serve - -* L'archivio dell'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* L'archivio dell'ultima versione di [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Sezione I - Preparazione - -1. Dalla sezione precedente della guida, la console dovrebbe essere già accesa e visualizzare la schermata dell'Homebrew Launcher -1. Avvia slotTool dalla lista degli homebrew disponibili - + Se rimani bloccato su una schermata rossa, spegni forzatamente la console tenendo premuto il pulsante di accensione per quindici secondi, quindi ritenta questa sezione -1. Seleziona l'opzione "INSTALL exploit to wifi slots 1,2,3 & shutdown" - + Apparirà del testo su schermo dopodiché la console si spegnerà -1. Rimuovi la scheda SD dalla console e connettila al computer -1. Copia il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD -1. Copia il file `usm.bin` dall'archivio `.zip` di unSAFE_MODE nella directory principale della tua scheda SD -1. Reinserisci la scheda SD nella tua console - -#### Sezione II - unSAFE_MODE - -1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché accendi la console - + Mantieni premuti i pulsanti finché la console non si avvia in Safe Mode -1. Premi "OK" per accettare l'aggiornamento - + Non c'è alcun aggiornamento. Fa parte del procedimento -1. Premi "Accetto" per accettare i termini e le condizioni -1. L'aggiornamento fallirà, con codice di errore `003-1099`. Questo risultato è corretto -1. Alla richiesta "Vuoi configurare le Impostazioni internet?", seleziona "Sì" -1. Nel menu successivo, entra in `Connessione 1` -> `Modifica` -> pagina successiva (la freccia a destra) -> `Impostazioni proxy` -> `Impostazioni avanzate` - + Ecco una [rappresentazione visiva](https://uwuu.ca/images/safemode_highlighted.png) -1. Quando vedi la scritta `B9S install SUCCESS` sullo schermo superiore, premi qualunque tasto per avviare la configurazione di Luma - -#### Sezione III - Configurare Luma3DS - -1. La tua console dovrebbe mostrare autonomamente il menu di configurazione di Luma -1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: - + **"Show NAND or user string in System Settings"** -1. Premi (Start) per salvare e riavviare il 3DS - + La console dovrebbe avviare il menu HOME dopo un po'. Se ottieni uno schermo nero per più di 5 minuti, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Sezione IV - Ripristino dei Profili di Connessione WiFi - -1. Avvia l'applicazione "Modalità download" -1. Attendi finché non vedrai i due pulsanti - + Non premere alcun pulsante -1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina -1. Seleziona "Miscellaneous options" -1. Seleziona "Switch the hb. title to the current app." -1. Premi (B) per continuare -1. Premi (B) per tornare al menu principale di Rosalina -1. Premi (B) per uscire dal menu di Rosalina -1. Premi il pulsante HOME, quindi chiudi l'applicazione "Modalità download" -1. Riavvia l'applicazione "Modalità download" -1. La console dovrebbe ora avviare l'Homebrew Launcher -1. Avvia slotTool dalla lista degli homebrew disponibili -1. Seleziona "RESTORE original wifi slots 1,2,3" -1. La console verrà riavviata - -___ - -### Prosegui con il [Completamento dell'installazione](finalizing-setup) -{: .notice--primary} +Questa pagina è stata rimossa perché il metodo utilizzato è obsoleto. Utilizza un metodo più recente indicato alla pagina [Cominciamo!](get-started). +{: .notice--warning} diff --git a/_pages/it_IT/installing-boot9strap-(usm).txt b/_pages/it_IT/installing-boot9strap-(usm).txt index ad130cbb1c..9a93f996f3 100644 --- a/_pages/it_IT/installing-boot9strap-(usm).txt +++ b/_pages/it_IT/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Obs #### Sezione I - Preparazione 1. Se la tua console è accesa, spegnila -1. Avvia [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) sul tuo computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Carica il tuo file movable.sed scegliendo l'opzione "Choose File" 1. Clicca su "Download unSAFE_MODE-bb3 archive" + Verrà scaricato un exploit DSiWare chiamato `F00D43D5.bin` e l'exploit di SAFE_MODE `usm.bin` all'interno di un archivio zip (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt index 5e9f681622..6a66f5367b 100644 --- a/_pages/it_IT/site-navigation.txt +++ b/_pages/it_IT/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installazione di boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installazione di boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installazione di boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installazione di boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installazione di boot9strap (MSET)](installing-boot9strap-(mset)) + [Installazione di boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installazione di boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt b/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt index 2f295bb082..a42d09cecd 100644 --- a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **「Show NAND or user string in System Settings」** -1. (Start) を押してセーブして再起動します - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ja_JP/installing-boot9strap-(usm).txt b/_pages/ja_JP/installing-boot9strap-(usm).txt index 9af55c7114..0570ec5bdc 100644 --- a/_pages/ja_JP/installing-boot9strap-(usm).txt +++ b/_pages/ja_JP/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/ja_JP/site-navigation.txt b/_pages/ja_JP/site-navigation.txt index 492cfc50ec..1a897093f5 100644 --- a/_pages/ja_JP/site-navigation.txt +++ b/_pages/ja_JP/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt b/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt index 42f8eac6fb..a42d09cecd 100644 --- a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. 성공하면 홈브류 런처가 실행될 것입니다. -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt index 4472c561e5..7dbef913c7 100644 --- a/_pages/ko_KR/installing-boot9strap-(usm).txt +++ b/_pages/ko_KR/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/ko_KR/site-navigation.txt b/_pages/ko_KR/site-navigation.txt index e5f9c72554..e83af36834 100644 --- a/_pages/ko_KR/site-navigation.txt +++ b/_pages/ko_KR/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt b/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt index 8e103f9049..a42d09cecd 100644 --- a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Tekan (Start) untuk save dan reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ms_MY/installing-boot9strap-(usm).txt b/_pages/ms_MY/installing-boot9strap-(usm).txt index 03bc4ad046..38bde331da 100644 --- a/_pages/ms_MY/installing-boot9strap-(usm).txt +++ b/_pages/ms_MY/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/ms_MY/site-navigation.txt b/_pages/ms_MY/site-navigation.txt index 17505d6910..5d7fd527c0 100644 --- a/_pages/ms_MY/site-navigation.txt +++ b/_pages/ms_MY/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt b/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt index 6cf71d13c5..a42d09cecd 100644 --- a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Druk op (Start) om op te slaan en opnieuw op te starten - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Nu zou je console de Homebrew Launcher moeten openen -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/nl_NL/installing-boot9strap-(usm).txt b/_pages/nl_NL/installing-boot9strap-(usm).txt index 0ec2074d6e..6892d8608d 100644 --- a/_pages/nl_NL/installing-boot9strap-(usm).txt +++ b/_pages/nl_NL/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/nl_NL/site-navigation.txt b/_pages/nl_NL/site-navigation.txt index dc6064aff8..5d9030162a 100644 --- a/_pages/nl_NL/site-navigation.txt +++ b/_pages/nl_NL/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt b/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt index 1c26c7e5dc..a42d09cecd 100644 --- a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt +++ b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Trykk (Start) for å lagre og starte på nytt - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/no_NO/installing-boot9strap-(usm).txt b/_pages/no_NO/installing-boot9strap-(usm).txt index 51db57e806..f19ca49cfc 100644 --- a/_pages/no_NO/installing-boot9strap-(usm).txt +++ b/_pages/no_NO/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/no_NO/site-navigation.txt b/_pages/no_NO/site-navigation.txt index b6fc1a3945..b8ead3556f 100644 --- a/_pages/no_NO/site-navigation.txt +++ b/_pages/no_NO/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt b/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt index 4a1fa7b371..487f25a45c 100644 --- a/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Spis Treści" %} - -### Wymagana Lektura - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### Czego Potrzebujesz - -* Najnowszej wersji [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instrukcje - -#### Sekcja I - Przygotowanie - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Poczekaj na zakończenie procesu - + If it displays a yellow screen, power your console off, then try this section again - + Jeśli pojawi się błąd, [przejdź do rozwiązywania problemów](troubleshooting#a-browser-based-exploit-is-not-working) -1. Jeśli Soundhax zadziałał, uruchomi się Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt index 374439ce27..a42d09cecd 100644 --- a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Spis Treści" %} - -### Wymagana Lektura - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Czego Potrzebujesz - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Sekcja I - Przygotowanie - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Sekcja III - Konfiguracja Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć: - + **"Show NAND or user string in System Settings"** -1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Uruchom aplikację Download Play -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Wybierz "Miscellaneous options" -1. Wybierz "Switch the hb. title to the current app." -1. Naciśnij (B) aby kontynuować -1. Naciśnij (B) aby powrócić do głównego menu Rosalina -1. Naciśnij (B) aby zamknąć menu Rosalina -1. Naciśnij (Home), a następnie zamknij aplikację Download Play -1. Relaunch the Download Play application -1. Twoja konsola powinna załadować Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pl_PL/installing-boot9strap-(usm).txt b/_pages/pl_PL/installing-boot9strap-(usm).txt index 893b276b67..0cd55e80dd 100644 --- a/_pages/pl_PL/installing-boot9strap-(usm).txt +++ b/_pages/pl_PL/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Sekcja I - Przygotowanie 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/pl_PL/site-navigation.txt b/_pages/pl_PL/site-navigation.txt index 04440079fe..beb64aa9ea 100644 --- a/_pages/pl_PL/site-navigation.txt +++ b/_pages/pl_PL/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Instalacja boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Instalacja boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Instalacja boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Instalacja boot9strap (MSET)](installing-boot9strap-(mset)) + [Instalacja boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt b/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt index cc9d7966fd..a42d09cecd 100644 --- a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use o botão (A) e os botões direcionais para ativar o seguinte: - + **"Show NAND or user string in System Settings"** -1. Aperte (Start) para salvar e reiniciar - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Inicie o aplicativo Download Play -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Selecione "Miscellaneous options" -1. Selecione "Switch the hb. title to the current app." -1. Aperte (B) para continuar -1. Aperte (B) para retornar para o menu principal do Rosalina -1. Aperte (B) para sair do menu do Rosalina -1. Aperte (Home), depois feche o Download Play -1. Relaunch the Download Play application -1. Seu dispositivo deve abrir o Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt index 066f9d9719..405ed79c6a 100644 --- a/_pages/pt_BR/installing-boot9strap-(usm).txt +++ b/_pages/pt_BR/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/pt_BR/site-navigation.txt b/_pages/pt_BR/site-navigation.txt index 376d0c1073..2b7055946b 100644 --- a/_pages/pt_BR/site-navigation.txt +++ b/_pages/pt_BR/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Instalando boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Instalando boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt b/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt index be66ae76a3..487f25a45c 100644 --- a/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Leitura Obrigatória - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt index 7347115728..a42d09cecd 100644 --- a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Leitura Obrigatória - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_PT/installing-boot9strap-(usm).txt b/_pages/pt_PT/installing-boot9strap-(usm).txt index 4a96afd235..3c541229fc 100644 --- a/_pages/pt_PT/installing-boot9strap-(usm).txt +++ b/_pages/pt_PT/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/pt_PT/site-navigation.txt b/_pages/pt_PT/site-navigation.txt index 4d817da53e..a6beaf5edc 100644 --- a/_pages/pt_PT/site-navigation.txt +++ b/_pages/pt_PT/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt b/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt index dadf542b60..487f25a45c 100644 --- a/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Cuprins" %} - -### Lectură obligatorie - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japonia și Coreea, indicate de literele U, E, J, sau K după versiunea de sistem. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### Ce aveți nevoie - -* Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instrucțiuni - -#### Secțiunea I - Preparații - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Așteptați până când procesul este terminat - + If it displays a yellow screen, power your console off, then try this section again - + Dacă primiți o eroare, [urmați acest ghid de depanare](troubleshooting#a-browser-based-exploit-is-not-working) -1. În cazul în care exploit-ul a mers, dispozitivul va încărca Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt index 10b34cca43..a42d09cecd 100644 --- a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Cuprins" %} - -### Lectură obligatorie - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Ce aveți nevoie - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Secțiunea I - Preparații - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copiați `boot.firm` de la Luma3DS `.zip` pe rădăcina cardului SD -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Secțiunea III - Configurând Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: - + **"Show NAND or user string in System Settings"** -1. Apăsați (Start) pentru a salva și reporni - + Dispozitivul ar trebui să încarce meniul HOME după o scurtă vreme. Dacă vedeți un ecran negru mai mult de 5 secunde, [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Lansați aplicația Download Play -1. Așteptați până când vedeți două butoane - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Selectați "Miscellaneous options" -1. Selectați "Switch the hb. title to the current app" -1. Apăsați (B) pentru a continua -1. Apăsați (B) ca să vă întoarceți la meniul principal Rosalina -1. Apăsați (B) pentru a ieși din meniul Rosalina -1. Apăsați (Home), apoi închideți Download Play -1. Relaunch the Download Play application -1. Dispozitivul dumneavoastră ar trebui să încarce Hombrew Launcher-ul -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continuați la [Finalizând instalarea](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ro_RO/installing-boot9strap-(usm).txt b/_pages/ro_RO/installing-boot9strap-(usm).txt index bd16aa4391..d32ee58ef6 100644 --- a/_pages/ro_RO/installing-boot9strap-(usm).txt +++ b/_pages/ro_RO/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Secțiunea I - Preparații 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Încărcați fișierul movable.sed folosind opțiunea "Choose File" 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/ro_RO/site-navigation.txt b/_pages/ro_RO/site-navigation.txt index bbe69eb18c..aa64c0ed58 100644 --- a/_pages/ro_RO/site-navigation.txt +++ b/_pages/ro_RO/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Instalând boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Instalând boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Instalând boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Instalând boot9strap (MSET)](installing-boot9strap-(mset)) + [Instalând boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Instalând boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt b/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt index 80c983d820..487f25a45c 100644 --- a/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Содержание" %} - -### Обязательно к прочтению - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -Эти инструкции работают на консолях регионов USA, Europe, Japan и Korea. На регион консоли указывает буква U, E, J или K после версии прошивки. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### Что понадобится - -* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Инструкция - -#### Часть I - Подготовительные работы - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Дождитесь окончания процесса - + If it displays a yellow screen, power your console off, then try this section again - + При возникновении ошибки, обратитесь к разделу [Проблемы и их решения](troubleshooting#не-работает-эксплойт-на-основе-браузера) -1. Если эксплойт сработал корректно, запустится Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt index f50d162613..a42d09cecd 100644 --- a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Содержание" %} - -### Обязательно к прочтению - -Для того, чтобы использовать уязвимость в SAFE_MODE прошивке консоли, нам нужно внедрить модифицированный WiFi профиль. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -После того, как профиль Wi-Fi будет внедрен, мы используем SAFE_MODE, функцию восстановления, которая присутствует на всех консолях 3DS, для активации модифицированного WiFi профиля. - -Если кнопки (L), (R), (Вверх) или (A) не работают, вам нужно будет использовать [Устаревший метод](legacy-methods). Если вам нужна помощь в этом деле, зайдите на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) вам помочь. -{: .notice--danger} - -### Что понадобится - -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Часть I - Подготовительные работы - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Скопируйте файл `boot.firm` из `.zip-архива` Luma3DS в корень SD-карты -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. Когда консоль все еще выключена, удерживайте следующие кнопки: (L) + (R) + (Вверх) + (A), затем нажмите кнопку питания - + Keep holding the buttons until the console boots into Safe Mode -1. Нажмите "OK" чтобы начать обновление - + Обновления не будет. Это часть эксплойта -1. Нажмите "Я принимаю" чтобы принять условия -1. В конечном итоге обновление завершится ошибкой с кодом `003-1099`. Это ожидаемое поведение -1. При запросе "Выполнить Интернет-настройки?", выберите "Выполнить" -1. В следующем меню перейдите в `Связь 1` -> `Изменить настройки` -> `Следующая страница (стрелка вправо)` -> `Настройки прокси` -> `Подробнее` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Как только вы увидите `B9S install SUCCESS` на верхнем экране, нажмите любую кнопку, чтобы перезагрузиться в меню настроек Luma - -#### Часть III - Настройка Luma3DS - -1. Ваша консоль должна автоматически показать меню настроек Luma -1. Нажимая (A) выберите следующие пункты: - + **"Show NAND or user string in System Settings"** -1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться - + После короткой задержки консоль должна загрузить меню HOME. Если экран остаётся чёрным дольше 5 минут, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Запустите приложение Загружаемая игра -1. Дождитесь появления двух кнопок - + Do not press either of the buttons -1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina -1. Выберите "Miscellaneous options" -1. Выберите "Switch the hb. title to the current app." -1. Нажмите (B), чтобы продолжить -1. Нажмите (B) для возврата в главное меню Rosalina -1. Нажмите (B) для выхода из главного меню Rosalina -1. Нажмите (Home), затем закройте приложение Загружаемая игра -1. Relaunch the Download Play application -1. Консоль должна загрузиться в Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Следующий шаг: [Завершение установки](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ru_RU/installing-boot9strap-(usm).txt b/_pages/ru_RU/installing-boot9strap-(usm).txt index 2faff78bd1..43c5551cd9 100644 --- a/_pages/ru_RU/installing-boot9strap-(usm).txt +++ b/_pages/ru_RU/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ Seedminer-based methods have been replaced by easier, safer methods. Please retu #### Часть I - Подготовительные работы 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Загрузите свой movable.sed, используя опцию "Выберите файл" 1. Нажмите кнопку "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/ru_RU/site-navigation.txt b/_pages/ru_RU/site-navigation.txt index 7b0255b7db..6c34822679 100644 --- a/_pages/ru_RU/site-navigation.txt +++ b/_pages/ru_RU/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Установка boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Установка boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Установка boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Установка boot9strap (MSET)](installing-boot9strap-(mset)) + [Установка boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Установка boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt b/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt index 435904a531..487f25a45c 100644 --- a/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Obligatorisk läsning - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt index 0ebb0598a1..a42d09cecd 100644 --- a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt +++ b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Obligatorisk läsning - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/sv_SE/installing-boot9strap-(usm).txt b/_pages/sv_SE/installing-boot9strap-(usm).txt index 8a65f7f59f..b1a57eac9c 100644 --- a/_pages/sv_SE/installing-boot9strap-(usm).txt +++ b/_pages/sv_SE/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/sv_SE/site-navigation.txt b/_pages/sv_SE/site-navigation.txt index 98dc745d06..9d538aeee4 100644 --- a/_pages/sv_SE/site-navigation.txt +++ b/_pages/sv_SE/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installera boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installera boot9strap (MSET)](installing-boot9strap-(mset)) + [Installera boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt b/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt index 62fd4bfa66..a42d09cecd 100644 --- a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt +++ b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/th_TH/installing-boot9strap-(usm).txt b/_pages/th_TH/installing-boot9strap-(usm).txt index 5a2b82fcde..c3145e91cf 100644 --- a/_pages/th_TH/installing-boot9strap-(usm).txt +++ b/_pages/th_TH/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/th_TH/site-navigation.txt b/_pages/th_TH/site-navigation.txt index c784c043ab..9c216f68a8 100644 --- a/_pages/th_TH/site-navigation.txt +++ b/_pages/th_TH/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt b/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt index 94501d5c8a..487f25a45c 100644 --- a/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title = "İçindekiler"%} - -### Okumanız Gerekli - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt index 4fcfe2ff27..a42d09cecd 100644 --- a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title = "İçindekiler"%} - -### Okumanız Gerekli - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Bölüm III - Luma3DS'in yapılandırılması - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Kaydedip yeniden başlatmak için (Start) basın - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### [Kurulumu Tamamlamak](finalizing-setup) için devam edin -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/tr_TR/installing-boot9strap-(usm).txt b/_pages/tr_TR/installing-boot9strap-(usm).txt index c47007dff3..14ad59613c 100644 --- a/_pages/tr_TR/installing-boot9strap-(usm).txt +++ b/_pages/tr_TR/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/tr_TR/site-navigation.txt b/_pages/tr_TR/site-navigation.txt index e208baeadf..996677581d 100644 --- a/_pages/tr_TR/site-navigation.txt +++ b/_pages/tr_TR/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt b/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt index 62fd4bfa66..a42d09cecd 100644 --- a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt +++ b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/uk_UA/installing-boot9strap-(usm).txt b/_pages/uk_UA/installing-boot9strap-(usm).txt index 5a2b82fcde..c3145e91cf 100644 --- a/_pages/uk_UA/installing-boot9strap-(usm).txt +++ b/_pages/uk_UA/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/uk_UA/site-navigation.txt b/_pages/uk_UA/site-navigation.txt index c784c043ab..9c216f68a8 100644 --- a/_pages/uk_UA/site-navigation.txt +++ b/_pages/uk_UA/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt b/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt index e040c8e855..487f25a45c 100644 --- a/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt index 62fd4bfa66..a42d09cecd 100644 --- a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt +++ b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/vi_VN/installing-boot9strap-(usm).txt b/_pages/vi_VN/installing-boot9strap-(usm).txt index 5a2b82fcde..c3145e91cf 100644 --- a/_pages/vi_VN/installing-boot9strap-(usm).txt +++ b/_pages/vi_VN/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section I - Prep Work 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/vi_VN/site-navigation.txt b/_pages/vi_VN/site-navigation.txt index c784c043ab..9c216f68a8 100644 --- a/_pages/vi_VN/site-navigation.txt +++ b/_pages/vi_VN/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) + [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt b/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt index 0ab29e8d8c..31859f89ec 100644 --- a/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "启动 Homebrew Launcher（通过 2020 版浏览器破解）" --- -{% include toc title="目录内容" %} - -### 必读事项 - -这种方法利用了 3DS 互联网浏览器的一些漏洞来启动 Homebrew Launcher。 - -这些操作可在美、欧、日、韩版的主机上使用，你可通过系统版本号末尾的 U，E，J，K 字符来区分主机版本。 如果你的机子是（港）台或神游版机（系统设置里面显示的版本最后一位为T或C），请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)，使用英语寻求帮助。 - -### 你需要准备点啥？ - -* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* 最新版的浏览器破解压缩文件 [[Old 3DS 请点击这里下载](https://github.com/zoogie/old-browserhax/releases/latest) / [New 3DS 请点击这里下载](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old 指的是你的主机机型。 如果你不确定你是哪一款机型，则你可以看看[这张图](https://3ds.eiphax.tech/pic/newold.png)。 -* 主机已连上 WiFI - -### 操作步骤 - -#### 第一步 – 准备工作 - -1. 将3DS关机，拔出SD卡 -1. 将 SD 卡插入电脑 -1. 从 Homebrew Launcher 发布页下载 `boot.3dsx`，然后复制到你 SD 卡的根目录。 - + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去 -1. 在浏览器破解 release 页下载的压缩文件中，打开对应你主机区域的文件夹 - + 你的主机区域可以在系统设置主界面的上屏右下角找到：U是美版、E是欧版、J是日版、K是韩版。 -1. 从那里复制 `3ds` 文件夹、`browserhax_hblauncher_ropbin_payload.bin` 和 `arm11code.bin` 到 SD 卡根目录 - + 你的 SD 卡根目录上现在应该有 `Nintendo 3DS` 文件夹、 `3ds` 文件夹和两个 `.bin` 文件了 - -#### 第二步 – 浏览器破解 - -1. 打开[这张图片](https://3ds.eiphax.tech/pic/hax.png) -1. 安全弹出 SD 卡并将其插回主机 -1. 打开你的主机，然后确认其已联上 WiFi。 -1. 在主菜单中，同时按下 L 键和 R 键 - + 这应该会打开一个二维码扫描器。 如果没有，那么接下来的 USM（破解的下一步）就没办法继续做下去了。 你需要使用 [Seedminer](seedminer) 代替本方法。 - + 如果你想手输链接，请在浏览器输入 `https://zoogie.github.io/web/nbhax/` -1. 使用二维码扫描器扫第1步打开的那个二维码 -1. 点击“PROCEED TO HAXX” -1. 等待该过程执行完成。 - + 如果黄屏了，请重启主机然后再试一次 - + 如果出现错误，参见[此故障排查章节](troubleshooting#a-browser-based-exploit-is-not-working) -1. 如果漏洞成功执行，你的设备将进入到 Homebrew Launcher - + 如果你看到一个没有找到任何应用的提示，请重新确认你是否解压了从浏览器破解 release 页下载的压缩文件里的 `3ds` 文件夹，并将其复制到内存卡的根目录，然后再试一次。 -1. 保持主机开启，然后继续下一部分。 - - -___ - -### 继续至[安装 boot9strap（通过 HBL-USM）](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +此页面由于使用的方法已经过时而被移除。 请回到[新手入门](get-started)使用较新的方法代替本教程。 +{: .notice--warning} diff --git a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt index 5adbd3a722..9ae8f92cf9 100644 --- a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt +++ b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "安装 boot9strap（通过 HBL-USM）" --- -{% include toc title="目录内容" %} - -### 必读事项 - -为了破解系统的 SAFE_MODE 固件，我们需要注入一个已被破解的 WiFi 配置文件到主机中。 - -现在我们能够进入 Homebrew 了，所以接下来我们会使用 slotTool 继续做下去。 - -你需要需要先做完 [2020 版浏览器破解步骤](homebrew-launcher-(browserhax-2020))才能打开 Homebrew Launcher。 - -如果你是通过其他方式进入 Homebrew Launcher 的，则你应该使用 [Frogtool](installing-boot9strap-(frogtool)) 而不是本方法。 - -一旦 WiFi 配置文件被注入，我们将会使用到 SAFE_MODE 来继续此教程。安全模式（SAVE MODE）是一个所有的 3DS 主机都存在的修复功能，之后它将被用于激活被破解的 WiFi 配置文件。 - -如果你的 L 键、R 键、↑ 键和 A 键中的其中一个按键坏了无法使用，则你只能使用[传统方法](legacy-methods)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 -{: .notice--danger} - -### 你需要准备点啥？ - -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* 最新版 [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### 第一步 – 准备工作 - -1. 你的主机现在应该在本教程的前一部分打开了 Homebrew Launcher 了 -1. 从自制程序列表中找到并启动 slotTool - + 如果你的主机卡在了红屏，请按住电源键 15 秒来强制关机，然后重试本步骤 -1. 选择 “INSTALL exploit to wifi slots 1,2,3 & shutdown” 选项 - + 你应该会看到屏幕上出现了一些文字，然后你的主机就关机了 -1. 从主机拔出 SD 卡，然后将其插入电脑 -1. 解压 Luma3DS `.zip` 里的 `boot.firm` 到你 SD 卡的根目录 -1. 从 unSAFE_MODE `.zip` 复制 `usm.bin` 到 SD 卡的根目录 -1. 将 SD 卡插回主机 - -#### 第二步 – unSAFE_MODE - -1. 将你的主机置于关机状态，按住 L + R + ↑ + A 按键，然后按下电源键 - + 按住这几个按钮，直到主机进入安全模式 -1. 点击 “OK” 来允许更新 - + 这个步骤实际上不存在更新。 这只是触发漏洞的一部分 -1. 点击 “I accept（我同意/同意する）” -1. 更新最终将失败，然后报出 `003-1099` 的错误。 这是剧本中的一部分 -1. 当系统问你“你想要配置互联网设置吗？（Would you like to configure Internet settings?）”时，点击 “Yes” -1. 在接下来出现的菜单中，移动至 `连接点 1（Connection 1）` -> `更改设置（Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy Settings）` -> `详细设置（Detailed Setup）` - + 这里有一份[演示图像](https://uwuu.ca/images/safemode_highlighted.png) -1. 然后你应该会看到上屏提示 `B9S install SUCCESS`，然后你就可以按下任意键重启到 Luma 设置了 - -#### 第三步 - 设置 Luma3DS - -1. 你的主机应该会自动进入到 Luma 配置菜单 -1. 使用方向键和 “A” 键来启用以下设置： - + **“Show NAND or user string in System Settings”** -1. 按下 “Start” 键保存设置并重启 - + 你的主机应该在一会后加载到系统桌面。 如果你等了超过五分钟还是黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### 第四步 – 还原 WiFi 配置文件 - -1. 运行“下载通信(Download Play)”程序 -1. 等到你看到两个按钮 - + 不要按下任意一个按钮 -1. 同时按下 “L” + “↓” + “Select” 键来打开 Rosalina 菜单 -1. 选择 “Miscellaneous options” -1. 选择 “Switch the hb. title to the current app.” -1. 按 “B” 键继续 -1. 按 “B” 键返回 Rosalina 主菜单 -1. 按 “B” 键退出 Rosalina 菜单 -1. 按下 “Home” 键，然后关闭“下载通信(Download Play)” -1. 重新运行“下载通信（Download Play）”程序 -1. 此时你的主机应该会启动 Homebrew Launcher了 -1. 从自制程序列表中找到并启动 slotTool -1. 选择“RESTORE original wifi slots 1,2,3” -1. 你的主机将会重启 - -___ - -### 继续至[完成安装](finalizing-setup) -{: .notice--primary} +此页面由于使用的方法已经过时而被移除。 请回到[新手入门](get-started)使用较新的方法代替本教程。 +{: .notice--warning} diff --git a/_pages/zh_CN/installing-boot9strap-(safecerthax).txt b/_pages/zh_CN/installing-boot9strap-(safecerthax).txt index e2c1e7c273..fd3eedb59f 100644 --- a/_pages/zh_CN/installing-boot9strap-(safecerthax).txt +++ b/_pages/zh_CN/installing-boot9strap-(safecerthax).txt @@ -8,7 +8,7 @@ title: "安装 boot9strap（通过 safecerthax）" safecerthax 兼容所有区域的旧版 3DS 和旧版 2DS。 -如果你的主机 L 键、R 键、↑ 键和 A 键有中一个坏了无法使用，则你只能使用替代方法，如 [Seedminer](seedminer)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 +如果你的主机 L 键、R 键、↑ 键和 A 键有中一个坏了无法使用，则你只能使用替代方法，如 [Seedminer](seedminer)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 {: .notice--warning} 此漏洞无法用于 New 3DS、New 3DS XL 或 New 2DS XL。 请确保你准备破解的主机是旧版 3DS、旧版 3DS XL 或旧版 2DS 中的一种型号后再继续教程。 diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt index 33eb2fa8c5..7f655771e4 100644 --- a/_pages/zh_CN/installing-boot9strap-(usm).txt +++ b/_pages/zh_CN/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ title: "安装 boot9strap（通过 USM）" #### 第一步 – 准备工作 1. 如果你的主机已经被你开机了，那么将其关机 -1. 在你的电脑上打开 [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) +1. 在你的电脑上打开 [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) 1. 点击 “选择文件” 选项，然后选择你的 movable.sed 上传 1. 点击 “Download unSAFE_MODE-bb3 archive” + 这将下载一个包含了名为 `F00D43D5.bin` 的已被破解的 DSiWare 备份，和一个名为 `usm.bin` 的已被破解的 SAFE_MODE 存档的 zip 文件（`unSAFE_MODE-bb3.zip`）到你的电脑上 diff --git a/_pages/zh_CN/site-navigation.txt b/_pages/zh_CN/site-navigation.txt index 8c3972caac..9cbcc0c1e1 100644 --- a/_pages/zh_CN/site-navigation.txt +++ b/_pages/zh_CN/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [安装 boot9strap（通过 Fredtool）](installing-boot9strap-(fredtool)) + [安装 boot9strap（通过 Frogtool）](installing-boot9strap-(frogtool)) + [安装 boot9strap（通过拆机硬改）](installing-boot9strap-(hardmod)) -+ [安装 boot9strap（通过 HBL-USM）](installing-boot9strap-(hbl-usm)) + [安装 boot9strap（通过 MSET）](installing-boot9strap-(mset)) + [安装 boot9strap（通过 ntrboot）](installing-boot9strap-(ntrboot)) + [安装 boot9strap（通过 SafeB9SInstaller）](installing-boot9strap-(safeb9sinstaller)) diff --git a/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt b/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt index 0d9d670454..487f25a45c 100644 --- a/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt @@ -2,53 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="條目內容" %} - -### 必讀事項 - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. - -### 必備項目 - -* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### 操作說明 - -#### 第一節 — 準備工作 - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region - + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. 等待程序完畢為止 - + If it displays a yellow screen, power your console off, then try this section again - + 如果遇到錯誤的話， [請依循此疑難排解之步驟](troubleshooting#a-browser-based-exploit-is-not-working) -1. 如果漏洞成功執行，您的主機將自動載入 Homebrew Launcher - + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt index 62c133ab69..a42d09cecd 100644 --- a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt +++ b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt @@ -2,80 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="條目內容" %} - -### 必讀事項 - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### 必備項目 - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### 第一節 — 準備工作 - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### 第三節 — 設定 Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. 透過方向鍵及『A』以開啟下列選項： - + **『Show NAND or user string in System Settings』** -1. 按『Start』鍵以存檔並重新啟動系統 - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. 啟動『下載通信 (Download Play)』程式 -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. 選擇『Miscellaneous options』 -1. 選擇『Switch the hb. title to the current app.』 -1. 按『B』繼續 -1. 按『B』回到 Rosalina 主選單 -1. 按『B』退出 Rosalina 選單 -1. 按『Home』鍵，並關閉『下載通信 (Download Play)』程式 -1. Relaunch the Download Play application -1. 您的主機應該就會啟動 Homebrew Launcher 了 -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### 繼續至[完成安裝](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/zh_TW/installing-boot9strap-(usm).txt b/_pages/zh_TW/installing-boot9strap-(usm).txt index 23f31d0b71..2718083d28 100644 --- a/_pages/zh_TW/installing-boot9strap-(usm).txt +++ b/_pages/zh_TW/installing-boot9strap-(usm).txt @@ -30,7 +30,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### 第一節 — 準備工作 1. If your device is powered on, power off your device -1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) diff --git a/_pages/zh_TW/site-navigation.txt b/_pages/zh_TW/site-navigation.txt index 634f7ea7d9..32582820ad 100644 --- a/_pages/zh_TW/site-navigation.txt +++ b/_pages/zh_TW/site-navigation.txt @@ -50,7 +50,6 @@ sitemap: false + [安裝 boot9strap (透過 Fredtool)](installing-boot9strap-(fredtool)) + [安裝 boot9strap (透過 Frogtool)](installing-boot9strap-(frogtool)) + [安裝 boot9strap (透過硬改)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) + [安裝 boot9strap (透過 MSET)](installing-boot9strap-(mset)) + [安裝 boot9strap (透過 ntrboot)](installing-boot9strap-(ntrboot)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))