` -> `Nintendo DSiWare` mappába az SD kártyán
+1. Töröld ki a `F00D43D5.bin` fájlt a Nintendo DSiWare mappádból és a számítógépedről. Ez nem fog kelleni többet
+
+___
+
+### Tovább a [telepítés véglegesítésére](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
index 214ceff884..99d184b1ef 100644
--- a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
+++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
@@ -55,12 +55,12 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme
#### IV. rész - Luma3DS konfigurálása
-1. Helyezd az SD kártyád a számítógépbe
+1. Helyezd a konzolod SD kártyáját a számítógépedbe
1. Töröld a `boot.firm` fájlt az SD kártyád gyökeréből
1. Másold át a `boot.firm` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe
1. Tedd vissza az SD kártyád a konzoldba
1. Kapcsold be a konzolod
-{%- include_relative include/configure-luma3ds.txt %}
+{% include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
diff --git a/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt b/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt
index 4c602e0684..83caa49a20 100644
--- a/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt
@@ -23,9 +23,6 @@ A technikai részleteit az ezen az oldalon használt exploit-oknak tekintsd meg
Az SSLoth lehetővé teszi a 11.13.0 és alatti verziók számára, hogy megkerüld a böngésző verzió ellenőrzést, ezáltal lehetővé tegye a new-browserhax vagy az old-browserhax (kompatibilis a 11.4.0 verziótól 11.13.0-ig minden régió esetén) használatát, amik az universal-otherapp-pal együtt használhatók.
-Ha frissítetted a konzolod az aktuális verzióra egy cartridge használatával, akkor nem fogod tudni megkerülni a böngésző verzió ellenőrzést. Maradj az aktuális firmware-en és kérj segítséget a [Nintendo Homebrew csatornán Discord-on](https://discord.gg/MWxPgEp).
-{: .notice--warning}
-
### Amire szükséged lesz
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) legfrisseb verziója (közvetlen letöltés)
diff --git a/_pages/hu_HU/region-changing.txt b/_pages/hu_HU/region-changing.txt
index 4830325d2d..918dce5521 100644
--- a/_pages/hu_HU/region-changing.txt
+++ b/_pages/hu_HU/region-changing.txt
@@ -13,7 +13,7 @@ Fontos, hogy tudd, hogy a régióváltás majdnem teljesen felesleges, mivel a L
Ez az oldal feltételezi, hogy van Luma3DS és boot9strap telepítve. Ha ezt a weboldalt végig követted (Telepítés véglegesítése), akkor van Luma3DS-ed és boot9strap-ed.
{: .notice--info}
-A folyamat részeként a rendszer konfigurációd visszaállításra kerül alapértékekre. Ez olyan dolgokat jelent, mint a felhasználónév, ország és nyelv. A telepített játékok és mentés adatuk nem érintett.
+As a part of this process, your system settings will be reset to its defaults. Ez olyan dolgokat jelent, mint a felhasználónév, ország és nyelv. **Installed games and their save data will not be affected.**
{: .notice--warning}
{% capture notice-6 %}
@@ -21,7 +21,7 @@ Ha módosítod a régióját a konzolodnak:
+ Nem fogod tudni használni az NNID azonosítód (ha van ilyened). Az NNID-k ahhoz a régióhoz kötöttek, ahol létre lettek hozva.
+ Elképzelhető, hogy nem fogod elérni az eShop-ot, még akkor sem ha [törlöd az eShop fiókod](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) előtte. Ez azért van, mert néhány cím linkelt marad a 3DS-hez, még akkor is ha a fiók törlésre kerül (különösen New 3DS-en).
- + Habár az eShop-ban már nem lehet vásárolni, a játék frissítések továbbra is letölthetők. A frissítések többnyire szükségesek az online játékhoz.
+ + Ez továbbra is releváns; bár az eShop-ban már nem lehet vásárolni, a játék frissítések továbbra is letölthetők. A frissítések többnyire szükségesek az online játékhoz.
+ Ez a logika kiterjed a rendszer átvitelekre, azaz nem fogsz tudni rendszer átvitelt végre hajtani egy USA 3DS-ről egy régió-cserélt JPN-2-USA 3DS-re.
+ Ahogy korábban elmondásra került, a rendszerátvitel és játék frissítése régió zároltak (pl. a japán eShop csak japán játék frissítéseket tartalmaz).
+ **Nem fogod tudni eltávolítani az egyedi firmware-t a konzolod brickelése nélkül!** Ha szeretnéd eltávolítani az egyedi firmware-t a jövőben, vissza **KELL** állítanod a NAND mentésed, amit a régió módosítás előtt készítettél.
@@ -62,7 +62,7 @@ A CTRTransfer képfájlok letöltéséhez szükséged lesz egy torrent kliensre,
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### VI. rész - Rendszer mentés adat törlése
+#### Section VI - Fixing locale-related issues
{% include_relative include/ctrnand-datayeet.txt %}
diff --git a/_pages/hu_HU/seedminer-(mii).txt b/_pages/hu_HU/seedminer-(mii).txt
index 84e5935c73..2e02749aeb 100644
--- a/_pages/hu_HU/seedminer-(mii).txt
+++ b/_pages/hu_HU/seedminer-(mii).txt
@@ -5,11 +5,11 @@ title: "Seedminer (Mii)"
{% include toc title="Tartalomjegyzék" %}
{% capture gpu_warning %}
-Ez a metódus egy ésszerűen erős GPU-t igényel (bármilyen dedikált grafikus kártya, amit az elmúlt években készítettek) és a parancssor használatának képességét. Ha nem tudod, mik ezek, vagy nem rendelkezel a szükséges hardverrel, kérj meg valakit a [Nintendo Homebrew Discord szerverén](https://discord.gg/MWxPgEp), hogy csinálja ezt meg neked. A következő információkkal kell már rendelkezz:
-+ Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
-+ Your console's ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see [this troubleshooting section](https://3ds.hacks.guide/troubleshooting#seedminer) if you have multiple)
-+ Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
-+ Your console's approximate year of manufacturing (it may be present behind the frontplate or backplate; if you don't know, just guess - it's not super important)
+Ez a metódus egy ésszerűen erős GPU-t igényel (bármilyen dedikált grafikus kártya, amit az elmúlt években készítettek) és a parancssor használatának képességét. Ha nem tudod mik ezek vagy nem rendelkezel a szükséges hardverrel, csatlakozz a [Nintendo Homebrew-ra Discord-on](https://discord.gg/MWxPgEp), és nyisd meg a "#mii-mining-assistance" csatornát, majd add meg a következőket:
++ A Mii QR kódod, közvetlenül feltöltve a Discord-ra (ne készíts képernyő képet vagy fotót a képről, csak küld el a HNI_XXXX.JPG képet magát)
++ A konzolod ID0 azonosítója (a 32 karakter hosszú nevű mappa közvetlenül a Nintendo 3DS mappában - tekintsd meg [ezt a hibaelhárítási útmutatót](https://3ds.hacks.guide/troubleshooting#seedminer) ha több is van)
++ A konzolod modellje (pl. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
++ A konzolod becsült gyártási éve (talán megtalálható az elő vagy hátlap alatt; ha nem tudod, tippelj - nem szuper fontos)
{% endcapture %}
{{ gpu_warning | markdownify }}
@@ -41,7 +41,7 @@ Ha Linux-ot vagy macOS-t használsz, cseréld ki a `py -3`-at `python3`-mal az
Ebben a fejezetben a telepíteni fogjuk a Seedminer-t és beszerezzük a konzolod azon fájljait, amik a bányászáshoz szükségesek.
-1. Csomagold ki a Seedminer `.zip` tartalmát és mozgassd ebből az operációs rendszereddel egyező nevű mappát bárhova a PC-dre
+1. Csomagold ki a Seedminer `.zip` tartalmát és mozgasd ebből az operációs rendszereddel egyező nevű mappát bárhova a PC-dre
+ Legyen ez a hely kéznél, mert ebbe a Seedminer mappába további fájlok kerülnek
1. A Seedminer mappában tartsd lenyomva a SHIFT gombot, majd jobb gombbal kattints bárhova a mappában, ahol üres hely van, és válaszd azt az opciót, ami megnyitja a Terminal-t, PowerShell-t vagy a parancssort (Command Prompt-ot)
1. A parancssori ablakba írd be a `py -3 -m pip install pycryptodomex` parancsot, majd nyomj ENTER-t és engedélyezd (allow) a telepítését
@@ -83,14 +83,14 @@ Ebben a fejezetben a Mii QR kódodból egy használható fájl amivel kibányás
+ Ne legyenek benne a kacsacsőrök
+ Ne próbáld meg kézzel beadni az ID0 kódot, mert könnyű hibázni. Legyél biztos abban, hogy az ID0 helyes, azzal, hogy másolod és beilleszted onnan, ahova az előző részben elmentetted
1. Ha végzett írd be a `py -3 seedminer_launcher3.py mii ` parancsot
- + Replace `` with the model of your console (`new` or `old`) - if you aren't sure, only models with the ZL/ZR buttons and C-Stick are "new"
- + Replace `` with the year the 3DS was made (you often find this behind the backplate) - leave this empty if you aren't sure, in which case it will start from the middle
- + The mining process will usually take up to 90 minutes, depending on luck and your GPU's strength
- + The first stage will likely max out at roughly offset 1500, depending on console model
- + If the second stage (after seeing `movable_part2.sed generation success`) gets past offset 100, verify that you input the correct ID0. If your ID0 is correct, you cannot use this method and will have to update to the latest version and see if a non-Seedminer method is available for you [here](alternate-exploits)
- + If you see the message `input.bin is invalid size`, remake the `input.bin` using your QR Code. If it *still* fails, open a different browser and remake the `input.bin` there
- + If you see the message `LFCS has been left blank`, use the opposite console model (e.g. `mii old` instead of `mii new`)
-1. When it finishes, a file called `movable.sed` will appear in the Seedminer folder
+ + Helyettesítsd a ``-t a konzol modeljével (`new` vagy `old`) - ha nem vagy biztos benne, azok a modellek amik rendselkeznek ZL/ZR gombokkal és C-Stick-kel azok újak (new)
+ + Helyettesítsd a ``-t az évvel, amikor a 3DS készült (gyakaran megtalálható a hátlap mögött) - hagyd ezt üresen, ha nem vagy biztos benne, ekkor középről kezdjük
+ + A bányászási folyamat általában 90 percet igényel, függően a szerencétől és a GPU erősségétől
+ + Az első szakasz a konzolmodelltől függően valószínűleg nagyjából 1500 offset-nél maximális
+ + Ha a második fázis (miután látható volt a `movable_part2.sed generation success` üzenet) túljutott a 100-as offset-en, ellenőrizd, hogy helyes ID0-t adtál-e meg. Ha az ID0 értéked korrekt, nem tudod használni ezt a metódust és frissítened kell a legutols verzióra és meg kell nézned, hogy egy nem-Seedminer metódus elérhető-e számodra [itt](alternate-exploits)
+ + Ha az `input.bin is invalid size` üzenetet látod, csinád újra az `input.bin` fájlt a QR kódodat használva. Ha *még mindig* hibára fut, nyiss meg egy másik böngészőt és készítsd újra az `input.bin` fájlt ott
+ + Ha a `LFCS has been left blank` üzenetet látod, használd az ellentétes konzol modelt (pl. `mii old` helyett `mii new`)
+1. Ha végzett, egy fájl `movable.sed` névvel megjelenik a Seedminer mappában
+ Folytasd a [BannerBomb3 (régi verziók)-al](bannerbomb3-(legacy))
{: .notice--primary}
diff --git a/_pages/hu_HU/site-navigation.txt b/_pages/hu_HU/site-navigation.txt
index 5c7e1f7255..5594585cbb 100644
--- a/_pages/hu_HU/site-navigation.txt
+++ b/_pages/hu_HU/site-navigation.txt
@@ -53,7 +53,7 @@ sitemap: false
+ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Boot9strap telepítése (Fredtool)](installing-boot9strap-(fredtool))
+ [Boot9strap telepítése (Fredtool-Inject)](installing-boot9strap-(fredtool-inject))
-+ [Boot9strap telepítése (Fredtool, Régi verziók)](installing-boot9strap-(fredtool-legacy))
++ [Installing boot9strap (menuhax)](installing-boot9strap-(menuhax))
+ [Boot9strap telepítése (Frogtool)](installing-boot9strap-(frogtool))
+ [Boot9strap telepítése (Hardmod)](installing-boot9strap-(hardmod))
+ [Boot9strap telepítése (HBL-USM)](installing-boot9strap-(hbl-usm))
diff --git a/_pages/hu_HU/troubleshooting.txt b/_pages/hu_HU/troubleshooting.txt
index 2372da1e14..187490cac8 100644
--- a/_pages/hu_HU/troubleshooting.txt
+++ b/_pages/hu_HU/troubleshooting.txt
@@ -34,6 +34,14 @@ Problémák telepítést követően:
### SigHaxed FIRM was not installed! Tekintsd meg az alsó képernyőt részletekért.
+{% capture compat %}
+MicroSD Card - init failed
+
+Az SD kártyád furán viselkedik. Próbáld meg újraformázni az SD kártyád ([Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)), [Linux](formatting-sd-(linux))). Ha ez nem működik, próbálj egy másik SD kártyát.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
{% capture compat %}
SigHaxed FIRM - File not found
@@ -315,7 +323,7 @@ Probléma van a `otherapp.bin` fájloddal (nem jó, hiányzik, rossz helyen van
{% capture compat %}
"Could not play"
-Rossz Soundhax fájlod van a konzolodhoz és a régiódhoz vagy az eszközöd nem kompatibilis a Soundhax-szal. Ez utóbbi esetben frissítsd a konzolod a legutolsó verzióra és kövesd a [Seedminer](seedminer) lépéseit.
+Rossz Soundhax fájlod van a konzolodhoz és a régiódhoz vagy az eszközöd nem kompatibilis a Soundhax-szal. Később, azt, hogy mit kell csinálnod, attól függ, hog milyen verzión van a 3DS-ed jelenleg. Csatlakozz a [Nintendo Homebrew-hoz a Discord-on](https://discord.gg/MWxPgEp) segítségért.
{% endcapture %}
{{ compat | markdownify }}
@@ -364,7 +372,7 @@ Probléma van az arm11code.bin` fájloddal. Töltsd le a legutolsó kiadását a
A böngésző alapú exploitok (mint például ez) gyakran instabilak és sokszor lefagynak, de néha megjavíthatók az alábbi lépések végrehajtásával.
1. Indítsd el a böngészőt, majd lépj be a beállításokba (browser settings)
-1. Görgess a legaljára, majd válaszd az "Initialize Savedata" opciót (ami lehet, hogy "Clear All Save Data" néven fut)
+1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data")
1. Próbáld meg újra végrehajtani az exploitot
{% endcapture %}
{{ compat | markdownify }}
@@ -407,10 +415,6 @@ A `SafeB9SInstaller.bin` fájl hiányzik, vagy rossz helyen van. Töltsd le a le
{% capture compat %}
Lefagyás a "Doing agbhax..." üzenetnél
Probléma lehet az arm11code.bin` fájloddal. Töltsd le újra a legutolsó kiadását az [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)-nak és rakd a fájlt az SD kártyád gyökerébe, majd nevezd át `arm11code.bin`-re. Ne add hozzá a `.bin` kiterjesztést, ha nem látod.
-
-Ha tajvani egységed van (T a verzió stringben, pl. 11.3.0-##T), akkor nem követheted ezeket a lépéseket, frissítened kell a konzolt és a [Seedminer](seedminer)-t kell használnod helyette.
-
-Ha kínai egységed van (C a verzió stringben, pl. 11.3.0-##C), csatlakozz a [Nintendo Homebrew-hoz a Discord-on](https://discord.gg/MWxPgEp) segítségért.
{% endcapture %}
{{ compat | markdownify }}
@@ -444,12 +448,35 @@ A dátum nincs megfelelően beállítva. A helyes beállításokhoz kövesd ezek
1. A fel/le nyilakkal állítsd be a helyes napot, hónapot és évet.
1. Nyomj OK-t a jóváhagyáshoz.
-Ha a probléma tartósan fennáll és a rendszer verzió E-re végződik, és a nyelv English-re állított, akkor módosítsd a nyelvet bármelyik másik nyelvre **átmenetileg**. Ezt utána visszamódosíthatod, ha elérted a Telepítés véglegesítésére.
+If the problem persists:
+
+- Ensure that `arm11code.bin`, `browserhax_hblauncher_ropbin_payload.bin`, and `boot.3dsx` are on the root of the SD card (not inside of any folder)
+- Ensure that you selected the correct payload for your region AND system version
+- Ensure that your region settings look [like this](/images/screenshots/skater_lang.png)
+- Try resetting your browser data:
+ 1. Indítsd el a böngészőt, majd lépj be a beállításokba (browser settings)
+ 1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initilize Save Data" or "Clear All Save Data")
+ 1. Próbáld meg újra végrehajtani az exploitot
+- Try changing the system language to something other than the current language
+
{% endcapture %}
{{ compat | markdownify }}
+
{% capture compat %}
-An exception occured or ErrDisp when pressing GO! GO!
+"An error has occurred. Hold down the POWER button to turn off the power..." (fekete képernyő szöveggel)
+
+A `arm11code.bin` fájl hiányzik, vagy rossz helyen van. Make sure to copy the files of the [latest version of super-skaterhax](https://github.com/zoogie/super-skaterhax/releases/latest) for your region and version to the root of your SD card (not inside of a folder).
+
+![]({{ "/images/screenshots/skater-root-layout.png" | absolute_url }})
+{: .notice--info}
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+
+{% capture compat %}
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
Ez valószínűleg azt jelzi, hogy már van egyedi firmware-ed. Érdemes elvégezned a [CFW ellenőrzését](checking-for-cfw).
@@ -476,28 +503,69 @@ Az alábbi lépések tetszőleges sorrendben hajthatók végre, azonban a lista
{{ compat | markdownify }}
{% capture compat %}
-Nem sikerül belépni a Rosalina menübe, hibás Bal váll / D-Pad Le / Select gomb(ok) miatt
+Error #01: No Nintendo 3DS folder
+
+Your SD card does not have the `Nintendo 3DS` folder. Power on your device with your SD card inserted, then wait for the device to show a message box that says "Creating HOME Menu management information". Once the message box disappears, power off your device and try again.
-Download this [alternate config.ini](/assets/config.ini) and place it in `/luma/`. Ez módosítja a Rosalina billentyű kombinációt (X) + (Y)-ra.
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"An exception occurred" vagy végtelen "Nintendo 3DS" képernyő, miután megpróbálom elindítani a Homebrew Launcher-t a Download Play-ből
+Error #02: Missing essential.exefs
+
+You said 'No' to the "Make essential files backup?" prompt in GodMode9. Power off your device, power it on while holding (Start) to re-enter GodMode9, say 'Yes' to the prompt, then try again.
-Probléma van a `boot.3dsx` fájloddal (nem jó, hiányzik, rossz helyen van vagy sérült). Töltsd le a legutolsó kiadását a [Homebrew Launcher](https://github.com/devkitPro/3ds-hbmenu/releases/latest)-nek és rakd a `boot.3dsx` fájlt az SD kártyád gyökerébe, felülírva bármilyen létező fájlt.
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"Scripts directory not found" a GodMode9-ben
-Nem másoltad át a `gm9` mappát a GodMode9 `.zip`-ből az SD kártyád gyökerébe. Töltsd le a legutolsó kiadását az [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)-nek és rakd a `gm9` mappát az SD kártyád gyökerébe, egyesítve (mergelve) a létezővel.
+Unable to open GodMode9 or Error #03: Missing files
+
+You did not copy everything from `finalize.zip` to the root of your SD card. Remember, your SD card should have at least these files:
+
+![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
+{: .notice--info}
+
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"Backup failed" vagy "Error: Could not open directory" a NAND backup készítésének megpróbálásakor
+
+Error #04: No space
+
+You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. Ha nincs elég szabad helyed, kövesd ezeket a lépéseket:
+
+1. Kapcsold ki a konzolod
+1. Távolítsd el az SD kártyád, majd csatlakoztasd a számítógépedhez
+1. Másold a `Nintendo 3DS` mappát az SD kártya gyökeréből a számítógépedre
+1. Töröld a Nintendo 3DS mappát az SD kártyáról
+1. Tedd vissza az SD kártyád a konzoldba
+1. Kapcsold ki a konzolod, tartsd nyomva a START és power gombokat, továbbra is nyomva a START gombot a GodMode9-be bootoláshoz
+1. Válaszd a "Scripts..." opciót
+1. Select "finalize"
+1. Follow the prompts in the script, answering each question that you are asked
+1. Másold a `gm9/out` mappát az SD kártyádról egy biztonságos helyre a számítógépeden
+1. Töröld a `__sysnand_##.bin` és a `__sysnand_##.bin.sha` fájlokat az SD kártyád `/gm9/out/` mappájából, megtartva az essential.exefs-t a `/gm9/out/` -ban
+1. Másold a `Nintendo 3DS` mappát a számítógépedről az SD kártyád gyökerébe
+1. Töröld a `Nintendo 3DS` mappát a számítógépedről
+
+Once done, re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Error #05: No title database
+
+Press (A) to create a title database, unlock SysNAND writing by entering the buttons on-screen, follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Error #06 or "Error: Could not open directory" when attempting a NAND backup
+
Győződj meg róla, hogy legalább 1.3 GB szabad hely van az SD kártyádon. Ha nincs elég szabad helyed, kövesd ezeket a lépéseket:
1. Kapcsold ki a konzolod
1. Távolítsd el az SD kártyád, majd csatlakoztasd a számítógépedhez
@@ -515,6 +583,14 @@ Ha van elég szabad hely az SD kártyádon, az SD kártya lehet sérült vagy hi
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Error #08: Dummy title database
+
+You didn't delete the dummy title database that was created by Error #05. Follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
---
## Boot problémák egyedi firmware-rel rendelkező konzolokon
@@ -664,6 +740,13 @@ Ha nem sikerült megtalálni a hibádat, vagy a lépések nem működnek, csatla
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher
+
+Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of [menuhax67](https://github.com/zoogie/menuhax67/releases/latest) (the menuhax `.zip`), then follow the ["Uninstall menuhax67" section](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits/menuhax67#Uninstall_menuhax67) here.
+{% endcapture %}
+{{ compat | markdownify }}
+
---
## Egyéb hibaelhárítás
@@ -699,6 +782,16 @@ Ha nem sikerült megtalálni a hibádat, vagy a lépések nem működnek, csatla
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Manually entering Homebrew Launcher
+
+If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need [boot.3dsx and boot.firm](https://github.com/LumaTeam/Luma3DS/releases/latest) on the root of your SD card.)
+
+{% include_relative include/launch-hbl-dlp.txt %}
+
+{% endcapture %}
+{{ compat | markdownify }}
+
{% capture compat %}
A szülői felügyelet kikapcsolása
diff --git a/_pages/id_ID/bannerbomb3-(legacy).txt b/_pages/id_ID/bannerbomb3-(legacy).txt
index becd77a5ad..41f3babb19 100644
--- a/_pages/id_ID/bannerbomb3-(legacy).txt
+++ b/_pages/id_ID/bannerbomb3-(legacy).txt
@@ -29,22 +29,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi
{% include_relative include/bb3-prep.txt %}
-#### Section II - Hardware Button Check
-
-In this section, you will see whether you can access Safe Mode on your console. This will determine which method you will follow on the next page.
-
-Your SD card should remain in your computer while you perform this check.
-
-{% include_relative include/safemodecheck.txt %}
-
___
-### Next steps: Choose an exploit
-
-If the camera appeared in the previous section, Safe Mode is likely to be working on your console.
-
-If the camera appeared, continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
+### Continue to [Installing boot9strap (menuhax)](installing-boot9strap-(menuhax))
{: .notice--primary}
-
-If the camera did NOT appear, continue to [Installing boot9strap (Fredtool, Legacy)](installing-boot9strap-(fredtool-legacy))
-{: .notice--info}
diff --git a/_pages/id_ID/ctrtransfer.txt b/_pages/id_ID/ctrtransfer.txt
index ef162a6298..4ddbbf5a82 100644
--- a/_pages/id_ID/ctrtransfer.txt
+++ b/_pages/id_ID/ctrtransfer.txt
@@ -11,7 +11,7 @@ This is an add-on section for installing an 11.15.0 CTRTransfer image to your co
This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
{: .notice--info}
-As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+As a part of this process, your system settings will be reset to its defaults. This includes things such as your username, country, and language. **Installed games and their save data will not be affected.**
{: .notice--warning}
### What You Need
@@ -42,7 +42,7 @@ To download the CTRTransfer images on this page, you will need a torrent client
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Deleting system save data
+#### Section VI - Fixing locale-related issues
{% include_relative include/ctrnand-datayeet.txt %}
diff --git a/_pages/id_ID/faq.txt b/_pages/id_ID/faq.txt
index 11b1195b32..5bf44483cb 100644
--- a/_pages/id_ID/faq.txt
+++ b/_pages/id_ID/faq.txt
@@ -16,7 +16,7 @@ title: "FAQ"
{% capture compat %}
I am on the latest system version. Is my console hackable without any external hardware/prerequisites?
-It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS is not.
+It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is [able to be modded on 11.17.0](homebrew-launcher-(super-skaterhax)) without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires [additional software or hardware](alternate-exploits).
{% endcapture %}
{{ compat | markdownify }}
@@ -24,7 +24,7 @@ It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS
{% capture compat %}
What consoles is this guide compatible with?
-The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL consoles. If your system version string displays as "0.0.0-0", then you may have a developer unit.
+This guide is compatible with all retail 3DS-family devices (3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL). If your system version string is displayed as "0.0.0-0", then you may have a developer unit.
{% endcapture %}
{{ compat | markdownify }}
@@ -45,7 +45,7 @@ Yes! This guide will install a few useful homebrew applications, including [Univ
{% capture compat %}
Can I use this to play games from other regions?
-Yes; Luma3DS will automatically ignore the region check for cartridges and installed titles. Some games may need to make use of Luma's [locale emulation feature](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) in order to work properly on out-of-region consoles.
+Yes; Luma3DS will automatically ignore the region check for cartridges and installed titles. Some games may need to make use of Luma's [locale emulation feature](https://wiki.hacks.guide/wiki/3DS:Setting_game_locales) in order to work properly on out-of-region consoles.
{% endcapture %}
{{ compat | markdownify }}
@@ -66,7 +66,9 @@ Your NNID (if you have one) will not be affected by this guide. Consoles with a
{% capture compat %}
Will my 3DS be banned for having CFW?
-There was a ban wave in May 2017 that banned CFW users from online play (eShop access, NNIDs, and Nintendo Accounts were unaffected), seemingly at random. A ban wave at such a scale has not been seen since. That being said, we don't know what Nintendo may have in store in the future. At this time, we don't think that bans are something that you need to worry about.
+There was a ban wave in May 2017 that banned CFW users from online play (eShop access, NNIDs, and Nintendo Accounts were unaffected), seemingly at random. A ban wave at such a scale has not been seen since. That being said, we don't know what Nintendo may have in store in the future.
+
+At this time, we don't think that bans are something that you need to worry about.
{% endcapture %}
{{ compat | markdownify }}
@@ -87,7 +89,9 @@ You will need at least 1.5GB of free SD card space to follow this guide in its e
{% capture compat %}
I heard about this thing I have to pay for (Gateway, Sky3DS, ntrboot, R4, etc). Is that something I need?
-No. Custom firmware can be installed for free on the latest firmware without any hardware devices. In fact, 3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
+At the moment, 3DS / 3DS XL / 2DS consoles on 11.17.0 need to use one of many [alternate exploits](alternate-exploits) to install custom firmware. If none of the other prerequisites are available, then ntrboot will be the cheapest available option (roughly $20 USD).
+
+3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
{% endcapture %}
{{ compat | markdownify }}
@@ -147,7 +151,7 @@ It depends on the format of the homebrew application. Generally speaking:
You can continue to download game updates from the Nintendo eShop, even though it has now shut down.
-If the game is not from the same region as the console, you will need to [dump the updates](dumping-titles-and-game-cartridges) from a 3DS that has the updates installed. The Nintendo eShop only contains updates for the console's region (a Japanese 3DS will only have updates for Japanese games).
+If the game is not from the same region as the console, you will need to [dump the updates](dumping-titles-and-game-cartridges) from a 3DS that has the updates installed. The Nintendo eShop only contains updates for the console's region (for example, a Japanese 3DS will only have updates for Japanese games).
{% endcapture %}
{{ compat | markdownify }}
diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt
index 7e54d62506..563b44544c 100644
--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@@ -8,17 +8,24 @@ title: "Finalizing Setup"
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND. In this case, we are using Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to patch the console, allowing it to run homebrew software.
-On this page, we will make critical system file backups and install the following homebrew programs:
+On this page, we will make critical system file backups and install some homebrew programs. Most of these steps will be automated using a script that you will run on your console.
-+ **FBI** *(installs CIA formatted applications)*
-+ **Anemone3DS** *(installs custom themes)*
-+ **Checkpoint** *(backs up and restores save files for 3DS and DS games)*
-+ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)*
-+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
-+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher)*
+{% capture compat %}
+List of homebrew applications that will be installed
-It is not recommended to skip downloading any of these applications, as many of them will be used later on this page. At the end of this page, your SD card will be cleaned up by removing unnecessary installation files.
-{: .notice--warning}
+Click the links to view the GitHub repository of each application. (Give them a star if you appreciate them!)
+
++ **[FBI](https://github.com/Steveice10/FBI)** *(installs CIA formatted applications)*
++ **[Homebrew Launcher Loader](https://github.com/PabloMK7/homebrew_launcher_dummy)** *(launches the Homebrew Launcher)*
++ **[Anemone3DS](https://github.com/astronautlevel2/Anemone3DS)** *(installs custom themes)*
++ **[Checkpoint](https://github.com/FlagBrew/Checkpoint)** *(backs up and restores save files for 3DS and DS games)*
++ **[ftpd](https://github.com/mtheall/ftpd)** *(access your 3DS SD card wirelessly)*
++ **[Universal-Updater](https://github.com/Universal-Team/Universal-Updater/)** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)*
++ **[GodMode9](https://github.com/d0k3/GodMode9)** *(multipurpose tool which can do NAND and cartridge functions)*
+
+{% endcapture %}
+{{ compat | markdownify }}
+{: .notice--info}
### Compatibility Notes
@@ -30,12 +37,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### What You Need
-* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
-* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
-* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
-* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
+* [finalizing.zip]({{ base_path }}/assets/finalizing.zip) (direct download)
### Instructions
@@ -45,26 +47,14 @@ In this section, you will copy the files necessary to follow the rest of the ins
1. Power off your console
1. Insert your SD card into your computer
-1. Create a folder named `cias` on the root of your SD card if it does not already exist
-1. Copy all of the CIA files (`Anemone3DS.cia`, `Checkpoint.cia`, `FBI.cia`, `Homebrew_Launcher.cia`, and `Universal-Updater.cia`) to the `/cias/` folder on your SD card
-1. Create a folder named `3ds` on the root of your SD card if it does not already exist
- + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the console automatically generates
-1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card
-1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist
-1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
-1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
-1. Reinsert your SD card into your console
-1. Power on your console
+1. Copy the contents of `finalizing.zip` to the root of your SD card, merging/replacing any existing folders if prompted
+1. Insert your SD card into your console
-The screenshots below indicate the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed.
+The screenshot below indicates the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed.
![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
{: .notice--info}
-![]({{ "/images/screenshots/godmode9-location.png" | absolute_url }})
-{: .notice--info}
-
-
#### Section II - CFW Check
As an additional safety measure, we will perform an additional check for custom firmware. If custom firmware is not installed by this point for any reason, the next section may render your console unable to be hacked without external hardware.
@@ -86,17 +76,12 @@ In this section, you will update your system to the latest version, which is saf
{% include_relative include/sysupdate.txt cfw="true" %}
-#### Section IV - Homebrew Launcher
-
-In this section, you will temporarily replace Download Play with Homebrew Launcher (which we need to launch FBI). Download Play will automatically go back to normal once you reboot your console.
-
-{% include_relative include/launch-hbl-dlp.txt %}
-
-#### Section V - RTC and DSP Setup
+#### Section IV - RTC and DSP setup
In this section, you will sync your 3DS internal clock with the actual time and dump the sound firmware (which is necesssary for some homebrew software to use sound properly).
1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+ + If one of these buttons is broken, download [config.ini]({{ base_path }}/assets/config.ini) and put it in your `luma` folder, replacing the existing one. This will change the Rosalina menu key combination to (X) + (Y)
1. Select "Miscellaneous options"
1. Select "Dump DSP firmware"
1. Press (B) to continue
@@ -105,19 +90,9 @@ In this section, you will sync your 3DS internal clock with the actual time and
1. Press (B) to return to the Rosalina main menu
1. Press (B) to exit the Rosalina menu
-#### Section VI - Installing CIAs
+#### Section V - Setup Script
-In this section, you will install several useful homebrew applications to HOME Menu.
-
-1. Launch FBI from the list of homebrew
-1. Navigate to `SD` -> `cias`
-1. Select "\"
-1. Select the "Install and delete all CIAs" option, then press (A) to confirm
-1. Press (Home), then close Download Play
-
-#### Section VII - CTRNAND Luma3DS
-
-In this section, you will use a script to copy some of Luma3DS's files to internal memory so that they can be accessed, even without an SD card inserted.
+In this section, you will use a script to automate homebrew installation, SD card cleanup, and system file backup.
1. Power off your console
1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
@@ -126,51 +101,17 @@ In this section, you will use a script to copy some of Luma3DS's files to intern
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
1. Press (Home) to bring up the action menu
1. Select "Scripts..."
-1. Select "GM9Megascript"
-1. Select "Scripts from Plailect's Guide"
-1. Select "Setup Luma3DS to CTRNAND"
-1. When prompted, press (A) to proceed
-1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
-1. Press (A) to continue
-
-#### Section VIII - Cleanup SD Card
-
-In this section, you will use a script to remove some unnecessary files from your SD card.
-
-1. Select "Cleanup SD Card"
-1. When prompted, press (A) to proceed
-1. Press (A) to continue
-1. Press (B) to return to the main menu
-
-#### Section IX - Backup Essential Files
-
-In this section, you will make backups of files that can be used to recover from software bricks or to recover data.
-
-1. Select "Backup Options"
-1. Select "SysNAND Backup"
-1. Press (A) to confirm
- + This process will take some time
- + If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
-1. Press (A) to continue
-1. Press (B) to return to the main menu
-1. Select "Exit"
-1. Press (A) to relock write permissions if prompted
-1. Navigate to `[S:] SYSNAND VIRTUAL`
-1. Press (A) on `essential.exefs` to select it
-1. Select "Copy to 0:/gm9/out"
- + If you see "Destination already exists", press (A) on "Overwrite file(s)"
-1. Press (A) to continue
-1. Press (Home) to bring up the action menu
-1. Select "Poweroff system" to power off your console
+1. Select "finalize"
+1. Follow the prompts in the script, answering each question that you are asked
+ + If you encounter an error, follow the instructions in the error message or consult the [troubleshooting](troubleshooting#finalizing-setup) page
+1. Once the script says "Setup complete!", press (A) to power off the device
+ + If you do NOT see the message "Setup complete!", the script was not successful and you will need to redo this section
1. Insert your SD card into your computer
-1. Copy `__sysnand_##.bin`, `__sysnand_##.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
- + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
- + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
-1. Delete `__sysnand_##.bin` and `__sysnand_##.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
- + The other backup files are negligible in size and may be kept on your SD card for ease of access
-1. If you have it, copy the `/luma/backups/` folder on your SD card to a safe location on your computer
-1. Reinsert your SD card into your console
-1. Power on your console
+1. Copy the `/gm9/out/` folder to a safe location on your computer
+ + This folder contains critical file backups and should be backed up to multiple locations (i.e. cloud storage) if possible
+ + The two SysNAND files are your NAND backup and can be used to revert your console to a working state if it is bricked by a software issue
+ + The `essential.exefs` file contains your console's system-unique files and can be used to recover your data in the event of a hardware failure
+1. Delete the contents of the `/gm9/out/` folder from your SD card
___
diff --git a/_pages/id_ID/homebrew-launcher-(smilehax-iie).txt b/_pages/id_ID/homebrew-launcher-(smilehax-iie).txt
index 5323c984f5..08cd5865c0 100644
--- a/_pages/id_ID/homebrew-launcher-(smilehax-iie).txt
+++ b/_pages/id_ID/homebrew-launcher-(smilehax-iie).txt
@@ -18,7 +18,7 @@ This set of instructions does not support the Japanese version of SmileBASIC.
+ The game "SmileBASIC" installed on your console
+ If you have downloaded it before, you can [redownload it](https://en-americas-support.nintendo.com/app/answers/detail/a_id/607/~/how-to-download-or-redownload-content-in-nintendo-3ds-eshop)
+ Your SD card must be inserted in your console to install SmileBASIC
-+ The latest release of [smilehax-IIe](https://github.com/zoogie/smilehax-IIe/releases/download/v1.0/Release_sh2e_v1.1.zip) (direct download)
++ The latest release of [smilehax-IIe](https://github.com/zoogie/smilehax-IIe/releases/download/v1.1/Release_sh2e_v1.1.zip) (direct download)
+ The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+ [otherapps.zip]({{ base_path }}/assets/otherapps.zip) (direct download)
diff --git a/_pages/id_ID/include/addproxy.txt b/_pages/id_ID/include/addproxy.txt
index 6cebab58fd..8f1a415d57 100644
--- a/_pages/id_ID/include/addproxy.txt
+++ b/_pages/id_ID/include/addproxy.txt
@@ -1,6 +1,9 @@
If you haven't already, make sure you have a working Internet connection set up on your console.
{: .notice--info}
+A visual guide is available for this section [here](/images/screenshots/set-proxy.png).
+{: .notice--success}
+
1. Launch the System Settings application
1. Navigate to `Internet Settings` -> `Connection Settings`
1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings`
diff --git a/_pages/id_ID/include/ctrnand-datayeet.txt b/_pages/id_ID/include/ctrnand-datayeet.txt
index 87c7ea957f..969daed056 100644
--- a/_pages/id_ID/include/ctrnand-datayeet.txt
+++ b/_pages/id_ID/include/ctrnand-datayeet.txt
@@ -1,4 +1,4 @@
-This section will reset your system configuration to its defaults. Installed games and their save data will not be affected. This is necessary to prevent known issues relating to extended memory mode and applets on some consoles.
+This section will reset your system settings to its defaults. **Installed games and their save data will not be affected.** This is **required** to prevent known issues relating to extended memory mode and applets on some consoles.
1. Power off your console
1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
diff --git a/_pages/id_ID/include/remove-usm-slottool.txt b/_pages/id_ID/include/remove-usm-slottool.txt
index 412936dc27..23fe581e90 100644
--- a/_pages/id_ID/include/remove-usm-slottool.txt
+++ b/_pages/id_ID/include/remove-usm-slottool.txt
@@ -1,6 +1,6 @@
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
-1. Launch the Download Play application
+1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
1. Wait until you see the two buttons
+ Do not press either of the buttons
1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
diff --git a/_pages/id_ID/installing-boot9strap-(frogtool).txt b/_pages/id_ID/installing-boot9strap-(frogtool).txt
index f248b3592d..c9817065ec 100644
--- a/_pages/id_ID/installing-boot9strap-(frogtool).txt
+++ b/_pages/id_ID/installing-boot9strap-(frogtool).txt
@@ -13,8 +13,7 @@ For technical details on the exploits that you will be using on this page, see "
{: .notice--info}
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
-If you are unable to install one, follow [BannerBomb3](bannerbomb3) instead.
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
### What You Need
diff --git a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
index 23edbd2456..92a877bee6 100644
--- a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
@@ -27,6 +27,7 @@ In order to follow these instructions, you will need the following:
- A second 3DS with custom firmware (the **source 3DS**) that is the same region as the 3DS you are trying to modify (the **target 3DS**)
- The consoles must be USA, JPN, or EUR region consoles
+ - The source 3DS can be [region changed](region-changing) to match the target 3DS if necessary
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both consoles
diff --git a/_pages/id_ID/installing-boot9strap-(menuhax).txt b/_pages/id_ID/installing-boot9strap-(menuhax).txt
new file mode 100644
index 0000000000..4208ddff9e
--- /dev/null
+++ b/_pages/id_ID/installing-boot9strap-(menuhax).txt
@@ -0,0 +1,89 @@
+---
+title: "Installing boot9strap (menuhax)"
+---
+
+{% include toc title="Table of Contents" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+See [here](https://github.com/zoogie/uloader) for information about uloader and [here](https://github.com/zoogie/menuhax67) for information about menuhax67.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
+{: .notice--warning}
+
+### What You Need
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [BannerBomb3](https://github.com/zoogie/Bannerbomb3/releases/download/v3.0/Release_v3.0.zip) (direct download)
+* The latest release of [uloader](https://github.com/zoogie/uloader/releases/download/1.0/uloader.3dsx) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+
+#### Section I - Prep Work
+
+1. Power off your console
+1. Insert your SD card into your computer
+1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
+1. Copy `bb3.bin` from the Release `.zip` to the root of your SD card, replacing the current file
+1. Copy `Launcher.dat` from the folder for your model and region inside the Release `.zip` to the root of your SD card
+1. Create a folder named `3ds` on the root of your SD card if it does not already exist
+ + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the console automatically generates
+1. Copy `uloader.3dsx` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your console
+
+#### Section II - BannerBomb3
+
+In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
+
+1. Power on your console
+1. Launch System Settings on your console
+1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
+ + Your console should show the BB3 multihax menu
+1. Use the D-Pad to navigate and press the (A) button to select "Install *hax"
+ + Your console will automatically reboot
+
+#### Section III - menuhax67
+
+In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+1. Tap on the small HOME Menu settings icon in the top left of the bottom screen (![]({{ "/images/homemenuicon.png" | absolute_url }}){: height="32px" width="52px"})
+ + If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+1. If the exploit was successful, your console will have booted into the Homebrew Launcher
+1. Launch uloader from the list of homebrew
+1. If the exploit was successful, you will have booted into SafeB9SInstaller
+ + If the console freezes or crashes, force power off the console, then retry this section
+
+#### Section IV - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section V - Removing menuhax67
+
+In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+1. Launch System Settings on your console
+1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
+1. Use the D-Pad to navigate and press the (A) button to select "Uninstall *hax"
+ + Your console will automatically reboot
+1. Power off your console
+1. Insert your SD card into your computer
+1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card
+1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
index 8c88ccd275..d5338a16ff 100644
--- a/_pages/id_ID/installing-boot9strap-(ntrboot).txt
+++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
@@ -55,12 +55,12 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
#### Section IV - Configuring Luma3DS
-1. Insert your SD card into your computer
+1. Insert your console's SD card into your computer
1. Delete `boot.firm` from the root of your SD card
1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Reinsert your SD card into your console
1. Power on your console
-{%- include_relative include/configure-luma3ds.txt %}
+{% include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
diff --git a/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt b/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt
index 538ff146d3..cd8f30d462 100644
--- a/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt
@@ -23,9 +23,6 @@ For technical details on the exploits that you will be using on this page, see [
SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing the use of new-browserhax or old-browserhax (compatible with versions 11.4.0 through 11.13.0 in all regions), which can then be used in conjunction with universal-otherapp.
-If you have updated your console to your current version using a cartridge, you will not be able to bypass the browser version check. If this is the case, stay on your current firmware and ask [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for help.
-{: .notice--warning}
-
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
diff --git a/_pages/id_ID/region-changing.txt b/_pages/id_ID/region-changing.txt
index dcb166bced..4cad3a89cd 100644
--- a/_pages/id_ID/region-changing.txt
+++ b/_pages/id_ID/region-changing.txt
@@ -13,7 +13,7 @@ Note that region changing is almost completely unnecessary since Luma3DS support
This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
{: .notice--info}
-As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+As a part of this process, your system settings will be reset to its defaults. This includes things such as your username, country, and language. **Installed games and their save data will not be affected.**
{: .notice--warning}
{% capture notice-6 %}
@@ -21,7 +21,7 @@ If you change the region of your console:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
- + While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This is still relevant because, while purchases can no longer be made on eShop, game updates are still being provided. Updates are usually required for online play.
+ This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the console!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
@@ -62,7 +62,7 @@ To download the CTRTransfer images on this page, you will need a torrent client
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Deleting system save data
+#### Section VI - Fixing locale-related issues
{% include_relative include/ctrnand-datayeet.txt %}
diff --git a/_pages/id_ID/seedminer-(mii).txt b/_pages/id_ID/seedminer-(mii).txt
index dd35ecbc74..e7cb83f51d 100644
--- a/_pages/id_ID/seedminer-(mii).txt
+++ b/_pages/id_ID/seedminer-(mii).txt
@@ -5,7 +5,7 @@ title: "Seedminer (Mii)"
{% include toc title="Table of Contents" %}
{% capture gpu_warning %}
-This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don't know what those are or do not have the hardware necessary, you can ask someone to do this for you at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp). You will need to have the following information ready:
+This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don't know what those are or do not have the hardware necessary, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp), open the "#mii-mining-assistance" channel and provide the following:
+ Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
+ Your console's ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see [this troubleshooting section](https://3ds.hacks.guide/troubleshooting#seedminer) if you have multiple)
+ Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
@@ -41,7 +41,7 @@ If you are on Linux or macOS, replace `py -3` with `python3` in all commands.
In this section, you will set up Seedminer and obtain your console's files that are needed for mining.
-1. Extract the contents of the Seedminer `.zip` and move the folder with your operating systeem's name to anywhere on your PC
+1. Extract the contents of the Seedminer `.zip` and move the folder with your operating system's name to anywhere on your PC
+ Keep this location handy, as this Seedminer folder will be where multiple other files are placed
1. In the Seedminer folder, hold SHIFT and right-click anywhere in the folder's empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
1. In the command line window, type `py -3 -m pip install pycryptodomex`, hit ENTER, and allow it to install
diff --git a/_pages/id_ID/site-navigation.txt b/_pages/id_ID/site-navigation.txt
index db65175253..79bb00b90f 100644
--- a/_pages/id_ID/site-navigation.txt
+++ b/_pages/id_ID/site-navigation.txt
@@ -53,7 +53,7 @@ sitemap: false
+ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
+ [Installing boot9strap (Fredtool-Inject)](installing-boot9strap-(fredtool-inject))
-+ [Installing boot9strap (Fredtool, Legacy)](installing-boot9strap-(fredtool-legacy))
++ [Installing boot9strap (menuhax)](installing-boot9strap-(menuhax))
+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
diff --git a/_pages/id_ID/troubleshooting.txt b/_pages/id_ID/troubleshooting.txt
index 60445e7bbf..157d4be98b 100644
--- a/_pages/id_ID/troubleshooting.txt
+++ b/_pages/id_ID/troubleshooting.txt
@@ -34,6 +34,14 @@ Issues after installation:
### SigHaxed FIRM was not installed! Check lower screen for more info.
+{% capture compat %}
+MicroSD Card - init failed
+
+Your SD card is most likely acting weird. Try reformatting your SD card ([Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)), [Linux](formatting-sd-(linux))). If this doesn't work, try another SD card.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
{% capture compat %}
SigHaxed FIRM - File not found
@@ -315,7 +323,7 @@ There is an issue with your `otherapp.bin` file (it is missing, misplaced, or co
{% capture compat %}
"Could not play"
-You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, you should update your console to the latest version and follow [Seedminer](seedminer).
+You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance.
{% endcapture %}
{{ compat | markdownify }}
@@ -364,7 +372,7 @@ There is an issue with your `arm11code.bin` file. Download the latest release of
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
1. Launch the browser, then launch the browser settings
-1. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data)
+1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data")
1. Try the exploit again
{% endcapture %}
{{ compat | markdownify }}
@@ -407,10 +415,6 @@ The file `SafeB9SInstaller.bin` is missing or misplaced. Download the latest rel
{% capture compat %}
Frozen on "Doing agbhax..."
There may be an issue with your `arm11code.bin` file. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place it on the root of your SD card, and rename it to `arm11code.bin`. Do not add the `.bin` extension if you do not already see it.
-
-If you have a Taiwanese unit (with a T in the version string, ie. 11.3.0-##T), you will not be able to follow these instructions, and you will need to update your console and follow [Seedminer](seedminer) instead.
-
-If you have a Mainland Chinese unit (with a C in the version string, ie. 11.3.0-##C), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance.
{% endcapture %}
{{ compat | markdownify }}
@@ -444,12 +448,35 @@ The date is set incorrectly. To set it correctly, follow these steps:
1. Tap Up/Down Arrows to set the correct Day, Month and Year.
1. Select OK to confirm.
-If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+If the problem persists:
+
+- Ensure that `arm11code.bin`, `browserhax_hblauncher_ropbin_payload.bin`, and `boot.3dsx` are on the root of the SD card (not inside of any folder)
+- Ensure that you selected the correct payload for your region AND system version
+- Ensure that your region settings look [like this](/images/screenshots/skater_lang.png)
+- Try resetting your browser data:
+ 1. Launch the browser, then launch the browser settings
+ 1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initilize Save Data" or "Clear All Save Data")
+ 1. Try the exploit again
+- Try changing the system language to something other than the current language
+
{% endcapture %}
{{ compat | markdownify }}
+
{% capture compat %}
-An exception occured or ErrDisp when pressing GO! GO!
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+The file `arm11code.bin` is missing or misplaced. Make sure to copy the files of the [latest version of super-skaterhax](https://github.com/zoogie/super-skaterhax/releases/latest) for your region and version to the root of your SD card (not inside of a folder).
+
+![]({{ "/images/screenshots/skater-root-layout.png" | absolute_url }})
+{: .notice--info}
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+
+{% capture compat %}
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
@@ -476,28 +503,69 @@ The steps below can be attempted in any order, but are listed from easiest to ha
{{ compat | markdownify }}
{% capture compat %}
-Unable to enter Rosalina menu due to broken Left Shoulder / Down D-Pad / Select button(s)
+Error #01: No Nintendo 3DS folder
+
+Your SD card does not have the `Nintendo 3DS` folder. Power on your device with your SD card inserted, then wait for the device to show a message box that says "Creating HOME Menu management information". Once the message box disappears, power off your device and try again.
-Download this [alternate config.ini](/assets/config.ini) and place it in `/luma/`. This will change the Rosalina key combination to (X) + (Y).
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"An exception occurred" or infinite "Nintendo 3DS" screen after trying to launch Homebrew Launcher from Download Play
+Error #02: Missing essential.exefs
+
+You said 'No' to the "Make essential files backup?" prompt in GodMode9. Power off your device, power it on while holding (Start) to re-enter GodMode9, say 'Yes' to the prompt, then try again.
-There is an issue with your `boot.3dsx` file (it is missing, misplaced, or corrupted). Download the latest release of [the Homebrew Launcher](https://github.com/devkitPro/3ds-hbmenu/releases/latest) and place `boot.3dsx` on the root of your SD card, replacing any existing file.
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"Scripts directory not found" in GodMode9
-You did not copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card. Download the latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) and place the `gm9` folder on the root of your SD card, merging it with the existing one.
+Unable to open GodMode9 or Error #03: Missing files
+
+You did not copy everything from `finalize.zip` to the root of your SD card. Remember, your SD card should have at least these files:
+
+![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
+{: .notice--info}
+
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"Backup failed" or "Error: Could not open directory" when attempting a NAND backup
+
+Error #04: No space
+
+You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don't have enough space, follow these steps:
+
+1. Power off your console
+1. Remove the SD card and insert it into your computer
+1. Copy the `Nintendo 3DS` folder from the root of your SD card to your computer
+1. Delete the Nintendo 3DS folder from the SD card
+1. Reinsert your SD card into your console
+1. Power off your console, hold START and power on still holding START to boot on GodMode9
+1. Select "Scripts..."
+1. Select "finalize"
+1. Follow the prompts in the script, answering each question that you are asked
+1. Copy the files in `gm9/out` on your SD to a safe location on your computer
+1. Delete the `__sysnand_##.bin` and `__sysnand_##.bin.sha` files from the SD card, keeping essential.exefs in `/gm9/out/`
+1. Copy the `Nintendo 3DS` folder from your computer to the root of your SD card
+1. Delete the `Nintendo 3DS` folder from your computer
+
+Once done, re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Error #05: No title database
+
+Press (A) to create a title database, unlock SysNAND writing by entering the buttons on-screen, follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Error #06 or "Error: Could not open directory" when attempting a NAND backup
+
Make sure you have at least 1.3GB available in your SD card. If you don't have enough space, follow these steps:
1. Power off your console
1. Remove the SD card and insert it into your computer
@@ -515,6 +583,14 @@ If you have enough space on your SD card, your SD might be corrupted or faulty.
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Error #08: Dummy title database
+
+You didn't delete the dummy title database that was created by Error #05. Follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
---
## Boot issues on consoles with custom firmware
@@ -664,6 +740,13 @@ If you weren't able to find your error or the instructions didn't work, join [Ni
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher
+
+Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of [menuhax67](https://github.com/zoogie/menuhax67/releases/latest) (the menuhax `.zip`), then follow the ["Uninstall menuhax67" section](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits/menuhax67#Uninstall_menuhax67) here.
+{% endcapture %}
+{{ compat | markdownify }}
+
---
## Other troubleshooting
@@ -699,6 +782,16 @@ If you weren't able to find your error or the instructions didn't work, join [Ni
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Manually entering Homebrew Launcher
+
+If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need [boot.3dsx and boot.firm](https://github.com/LumaTeam/Luma3DS/releases/latest) on the root of your SD card.)
+
+{% include_relative include/launch-hbl-dlp.txt %}
+
+{% endcapture %}
+{{ compat | markdownify }}
+
{% capture compat %}
Turning off Parental Controls
diff --git a/_pages/it_IT/bannerbomb3-(legacy).txt b/_pages/it_IT/bannerbomb3-(legacy).txt
index 20ef9fe13c..66500708fc 100644
--- a/_pages/it_IT/bannerbomb3-(legacy).txt
+++ b/_pages/it_IT/bannerbomb3-(legacy).txt
@@ -29,22 +29,7 @@ Queste istruzioni funzionano su console americane, europee, giapponesi e coreane
{% include_relative include/bb3-prep.txt %}
-#### Sezione II - Verifica Pulsanti Hardware
-
-In questa sezione controllerai se la tua console può accedere alla Modalità Provvisoria. Serve per determinare quale metodo seguirai nella prossima pagina.
-
-La tua scheda SD dovrebbe rimanere nel tuo computer mentre effettui questo controllo.
-
-{% include_relative include/safemodecheck.txt %}
-
___
-### Passaggi successivi: Scelta di un exploit
-
-Se è apparsa la fotocamera nella sezione precedente, la tua console ha la Modalità Provvisoria probabilmente funzionante.
-
-Se è apparsa la fotocamera, prosegui con [Installazione di boot9strap (USM)](installing-boot9strap-(usm))
+### Prosegui con l'[Installazione di boot9strap (menuhax)](installing-boot9strap-(menuhax))
{: .notice--primary}
-
-Se la fotocamera NON è apparsa, prosegui con [Installazione di boot9strap (Fredtool, Legacy)](installing-boot9strap-(fredtool-legacy))
-{: .notice--info}
diff --git a/_pages/it_IT/contribute.txt b/_pages/it_IT/contribute.txt
index 740e4b07d3..a689b39a5f 100644
--- a/_pages/it_IT/contribute.txt
+++ b/_pages/it_IT/contribute.txt
@@ -14,7 +14,7 @@ Se vuoi tradurre questa guida in altre lingue (o se vuoi aiutarci a mantenere ag
## Seeding
-Alcuni file della guida sono disponibili soltanto come torrent. If you'd like to help seed these torrents to ensure their availability in the future, you can download the `.zip` file containing all our `.torrent` files: [torrents.zip](/assets/torrents.zip) (last updated 2023-03-16)
+Alcuni file della guida sono disponibili soltanto come torrent. Se vuoi aiutare a condividere questi torrent per assicurarne la disponibilità in futuro, puoi scaricare il file `.zip` contenente tutti i nostri file `.torrent`: [torrents.zip](/assets/torrents.zip) (ultimo aggiornamento 16-03-2023)
C'è anche un [feed RSS]({{ "rss.xml" | absolute_url }}) che può venire aggiornato per i torrent futuri, a cui puoi iscriverti.
diff --git a/_pages/it_IT/ctrtransfer.txt b/_pages/it_IT/ctrtransfer.txt
index 83b6637550..7fe3a64a30 100644
--- a/_pages/it_IT/ctrtransfer.txt
+++ b/_pages/it_IT/ctrtransfer.txt
@@ -11,7 +11,7 @@ In questa sezione aggiuntiva verrà spiegato come installare un'immagine CTRTran
Questa pagina presuppone che tu abbia già installato Luma3DS e boot9strap. Se hai seguito questo sito web fino alla fine (Completamento dell'installazione), hai Luma3DS e boot9strap.
{: .notice--info}
-Come parte di questo processo, la configurazione di sistema verrà ripristinata ai valori predefiniti. Questo include dati come il tuo nome utente, il paese e la lingua. I giochi installati e i loro dati di salvataggio non verranno toccati.
+Come parte di questo processo, la configurazione di sistema verrà ripristinata ai valori predefiniti. Questo include dati come il tuo nome utente, il paese e la lingua. **I giochi installati e i loro dati di salvataggio non verranno toccati.**
{: .notice--warning}
### Cosa serve
@@ -42,7 +42,7 @@ Per scaricare le immagini CTRTransfer di questa pagina avrai bisogno di un clien
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Sezione VI - Cancellare i dati di salvataggio del sistema
+#### Sezione VI - Risoluzione dei problemi di regionalità
{% include_relative include/ctrnand-datayeet.txt %}
diff --git a/_pages/it_IT/faq.txt b/_pages/it_IT/faq.txt
index 3561bff2a8..ae1a7e551d 100644
--- a/_pages/it_IT/faq.txt
+++ b/_pages/it_IT/faq.txt
@@ -16,7 +16,7 @@ title: "FAQ"
{% capture compat %}
Ho installato l'ultima versione di sistema. Posso modificare la mia console senza hardware esterno o altro?
-Dipende dal modello della tua console. Al momento, New 3DS / New 3DS XL / New 2DS XL possono essere modificati su 11.17.0 senza alcun prerequisito (es. giochi eShop titles, oggetti fisici), mentre non si può con 3DS / 3DS XL / 2DS.
+Dipende dal modello della tua console. Al momento, i New 3DS / New 3DS XL / New 2DS XL [possono essere modificati su 11.17.0](homebrew-launcher-(super-skaterhax)) senza alcun prerequisito (es. titoli eShop, oggetti fisici), mentre i 3DS / 3DS XL / 2DS richiedono [software o hardware aggiuntivo](alternate-exploits).
{% endcapture %}
{{ compat | markdownify }}
@@ -24,7 +24,7 @@ Dipende dal modello della tua console. Al momento, New 3DS / New 3DS XL / New 2D
{% capture compat %}
Con quali console è compatibile questa guida?
-Le istruzioni sono identiche per tutte le console 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, e New 2DS XL. Se il nome della tua versione di sistema è "0.0.0-0", potresti avere una console per sviluppatori.
+Questa guida è compatibile con tutte le console della famiglia 3DS (3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL). Se il codice della tua versione di sistema è "0.0.0-0", potresti avere una console per sviluppatori.
{% endcapture %}
{{ compat | markdownify }}
@@ -45,7 +45,7 @@ Sì! Questa guida installerà alcune applicazioni homebrew utili, tra cui [Unive
{% capture compat %}
Potrò giocare a giochi comprati all'estero?
-Sì; Luma3DS ignorerà automaticamente il controllo regione per le cartucce e i titoli installati. Alcuni giochi potrebbero aver bisogno di utilizzare la [funzione di emulazione regionale](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) per funzionare correttamente su console fuori regione.
+Sì; Luma3DS ignorerà automaticamente il controllo regione per le cartucce e i titoli installati. Alcuni giochi potrebbero aver bisogno di utilizzare la [funzione di emulazione regionale](https://wiki.hacks.guide/wiki/3DS:Setting_game_locales) per funzionare correttamente su console fuori regione.
{% endcapture %}
{{ compat | markdownify }}
@@ -66,7 +66,9 @@ Il tuo NNID (se ne hai uno) non sarà influenzato da questa guida. Console di re
{% capture compat %}
Il mio 3DS sarà bandito avendo un CFW?
-Nel Maggio 2017 c'è stata un'ondata di ban che ha impedito agli utenti CFW di giocare online (l'accesso all'eShop, I NNID e i Nintendo Account non sono stati influenzati), apparentemente in modo casuale. Da allora non si è più assistito a un'ondata di ban di tale portata. Detto questo, non sappiamo cosa possa riservarci Nintendo nel futuro. In questo momento, non pensiamo che i ban siano qualcosa di cui ci sia bisogno di preoccuparsi.
+Nel Maggio 2017 c'è stata un'ondata di ban che ha impedito agli utenti CFW di giocare online (l'accesso all'eShop, I NNID e i Nintendo Account non sono stati influenzati), apparentemente in modo casuale. Da allora non si è più assistito a un'ondata di ban di tale portata. Detto questo, non sappiamo cosa possa riservarci Nintendo nel futuro.
+
+In questo momento, non pensiamo che i ban siano qualcosa di cui ci sia bisogno di preoccuparsi.
{% endcapture %}
{{ compat | markdownify }}
@@ -87,7 +89,9 @@ Avrai bisogno di almeno 1,5 GB di spazio libero nella scheda SD per seguire ques
{% capture compat %}
Ho sentito di questa cosa per cui dovrei pagare (Gateway, Sky3DS, ntrboot, R4, ecc). È qualcosa di cui ho bisogno?
-No. Il custom firmware può essere installato gratuitamente sui firmware più recenti senza alcun dispositivo hardware. Peraltro, le flashcart in modalità 3DS come Gateway e Sky3DS non sono consigliate perché obsolete e possono comportare il ban o il rischio di brickare la console.
+Al momento, le console 3DS / 3DS XL / 2DS su 11.17.0 devono utilizzare uno dei tanti [exploit alternativi](alternate-exploits) per installare un custom firmware. Se non è disponibile nessuno degli altri prerequisiti, allora ntrboot sarà l'opzione più economica (circa 20 Euro).
+
+Le flashcart in modalità 3DS come Gateway e Sky3DS non sono consigliate perché obsolete e possono comportare il ban o il rischio di brickare la console.
{% endcapture %}
{{ compat | markdownify }}
@@ -147,7 +151,7 @@ Dipende dal formato dell'applicazione homebrew. Generalmente:
Puoi continuare scaricare gli aggiornamenti dei giochi dal Nintendo eShop, anche se è stato chiuso.
-Se il gioco non è della stessa regione della console, dovrai [scaricare gli aggiornamenti](dumping-titles-and-game-cartridges) da un 3DS con gli aggiornamenti installati. Il Nintendo eShop contiene gli aggiornamenti relativi alla regione della console (un 3DS giapponese avrà solo gli aggiornamenti per i giochi giapponesi).
+Se il gioco non è della stessa regione della console, dovrai [scaricare gli aggiornamenti](dumping-titles-and-game-cartridges) da un 3DS con gli aggiornamenti installati. Il Nintendo eShop contiene gli aggiornamenti relativi alla regione della console (ad esempio, un 3DS giapponese avrà solo gli aggiornamenti per i giochi giapponesi).
{% endcapture %}
{{ compat | markdownify }}
diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt
index 1a8b046e12..9563935cc0 100644
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@@ -8,17 +8,24 @@ title: "Completamento dell'installazione"
Il file `boot.firm` è il file avviato da boot9strap stesso al termine del caricamento dalla NAND. In questo caso, stiamo usando Luma3DS di [LumaTeam](https://github.com/LumaTeam/) per modificare la console, consentendogli di eseguire software homebrew.
-In questa pagina realizzeremo backup di file di sistema critici e installeremo i seguenti programmi homebrew:
+In questa pagina realizzeremo backup di file di sistema critici e installeremo i alcuni programmi homebrew. La maggior parte di questi passaggi sarà automatizzata utilizzando uno script che verrà eseguito sulla tua console.
-+ **FBI** *(installa applicazioni in formato CIA)*
-+ **Anemone3DS** *(installa temi personalizzati)*
-+ **Checkpoint** *(salva e ripristina backup dei salvataggi di giochi 3DS e DS)*
-+ **Universal-Updater** *(un'applicazione per scaricare homebrew direttamente sul 3DS tramite Wi-Fi)*
-+ **GodMode9** *(applicazione multifunzione per gestire NAND e schede di gioco)*
-+ **Homebrew Launcher Loader** *(avvia l'Homebrew Launcher)*
+{% capture compat %}
+Elenco delle applicazioni homebrew che saranno installate
-È consigliato non saltare il download di alcuna di queste applicazioni, in quanto molte verranno utilizzate successivamente in questa stessa pagina. Al termine di questa pagina, la scheda SD verrà ripulita rimuovendo i file di installazione non più necessari.
-{: .notice--warning}
+Clicca sui collegamenti per visualizzare il repository GitHub di ogni applicazione. (Lasciagli una stella se li ritieni utili!)
+
++ **[FBI](https://github.com/Steveice10/FBI)** **(installa applicazioni in formato CIA)*
++ **[Homebrew Launcher Loader](https://github.com/PabloMK7/homebrew_launcher_dummy)** *(avvia l'Homebrew Launcher)*
++ **[Anemone3DS](https://github.com/astronautlevel2/Anemone3DS)** *(installa temi personalizzati)*
++ **[Checkpoint](https://github.com/FlagBrew/Checkpoint)** *(salva e ripristina file di salvataggio per giochi 3DS e DS)*
++ **[ftpd](https://github.com/mtheall/ftpd)** *(accede alla scheda SD del tuo 3DS via wireless)*
++ **[Universal-Updater](https://github.com/Universal-Team/Universal-Updater/)** *(un app store per applicazioni homebrew per scaricare homebrew dal 3DS via Wi-Fi)*
++ **[GodMode9](https://github.com/d0k3/GodMode9)** *(strumento multiuso per gestire la NAND e le schede di gioco)*
+
+{% endcapture %}
+{{ compat | markdownify }}
+{: .notice--info}
### Note di Compatibilità
@@ -30,12 +37,7 @@ Se la tua precedente installazione CFW era basata su EmuNAND e desideri spostare
### Cosa serve
-* L'ultima versione di [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* La versione v3.7.4 di [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
-* L'ultima versione di [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (il file `.cia`)
-* L'ultima versione di [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (il file `.cia`)
-* L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/latest) (**entrambi** i file `.cia` e `.3dsx`)
-* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (il file `.zip` di GodMode9)
+* [finalizing.zip]({{ base_path }}/assets/finalizing.zip) (download diretto)
### Istruzioni
@@ -45,26 +47,14 @@ In questa sezione, copierai i file necessari per seguire le rimanenti istruzioni
1. Spegni la tua console
1. Inserisci la scheda SD nel tuo computer
-1. Se assente, crea una cartella chiamata `cias` nella directory principale della tua scheda SD
-1. Copia tutti i file CIA (`Anemone3DS.cia`, `Checkpoint.cia`, `FBI.cia`, `Homebrew_Launcher.cia` e `Universal-Updater.cia`) nella cartella `/cias/` della tua scheda SD
-1. Se assente, crea una cartella chiamata `3ds` nella directory principale della tua scheda SD
- + Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella `Nintendo 3DS` generata automaticamente dalla console
-1. Copia il file `FBI.3dsx` nella cartella `/3ds/` nella tua scheda SD
-1. Se assente, crea una cartella chiamata `payloads` nella cartella `luma` della tua scheda SD
-1. Copia il file `GodMode9.firm` dall'archivio `.zip` di GodMode9 dentro la cartella `/luma/payloads/` della tua scheda SD
-1. Copia la cartella `gm9` presente nell'archivio `.zip` di GodMode9 nella directory principale della tua scheda SD
-1. Reinserisci la scheda SD nella tua console
-1. Accendi la tua console
+1. Copy the contents of `finalizing.zip` to the root of your SD card, merging/replacing any existing folders if prompted
+1. Inserisci la scheda SD nella tua console
-I successivi screenshot indicano la struttura minima che la scheda SD deve avere per proseguire in questa pagina. Potresti avere file o cartelle ulteriori nella tua scheda SD, a seconda della tua precedente configurazione o del metodo che hai seguito.
+Il seguente screenshot indica la struttura minima che la scheda SD deve avere per proseguire in questa pagina. Potresti avere file o cartelle ulteriori nella tua scheda SD, a seconda della tua precedente configurazione o del metodo che hai seguito.
![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
{: .notice--info}
-![]({{ "/images/screenshots/godmode9-location.png" | absolute_url }})
-{: .notice--info}
-
-
#### Sezione II - Controllo del CFW
Come precauzione aggiuntiva, controlleremo anche la presenza di un custom firmware. Se per qualche motivo non è ancora stato installato un custom firmware, la sezione successiva potrebbe rendere impossibile modificare la console senza hardware esterno.
@@ -86,17 +76,12 @@ In questa sezione, aggiornerai il tuo sistema all'ultima versione, tranquillamen
{% include_relative include/sysupdate.txt cfw="true" %}
-#### Sezione IV - Homebrew Launcher
-
-In questa sezione, sostituirai temporaneamente la "Modalità download" con l'Homebrew Launcher (necessario per avviare FBI). L'applicazione "Modalità download" tornerà automaticamente quella originale al riavvio della console.
-
-{% include_relative include/launch-hbl-dlp.txt %}
-
-#### Sezione V - Installazione di RTC e DSP
+#### Sezione IV - Installazione di RTC e DSP
In questa sezione, sincronizzerai l'orologio interno del tuo 3DS con l'ora reale e scaricherai il firmware audio (necessario per permettere ad alcuni software homebrew di usare correttamente i suoni).
1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina
+ + Se uno di questi pulsanti è rotto, scarica [config.ini]({{ base_path }}/assets/config.ini) e mettilo nella tua cartella `luma`, sostituendo il file preesistente. Questo cambierà la combinazione di tasti del menù Rosalina in (X) + (Y)
1. Seleziona "Miscellaneous options"
1. Seleziona "Dump DSP firmware"
1. Premi (B) per continuare
@@ -105,19 +90,9 @@ In questa sezione, sincronizzerai l'orologio interno del tuo 3DS con l'ora reale
1. Premi (B) per tornare al menu principale di Rosalina
1. Premi (B) per uscire dal menu di Rosalina
-#### Sezione VI - Installazione dei CIA
+#### Sezione V - Installazione dello Script
-In questa sezione, installerai diverse applicazioni homebrew utili nel menu HOME.
-
-1. Avvia FBI dalla lista degli homebrew disponibili
-1. Entra nella cartella `SD` -> `cias`
-1. Seleziona "\"
-1. Seleziona l'opzione "Install and delete all CIAs", quindi premi (A) per confermare la scelta
-1. Premi il pulsante HOME, quindi chiudi l'applicazione "Modalità download"
-
-#### Sezione VII - CTRNAND Luma3DS
-
-In questa sezione, userai uno script per copiare alcuni file di Luma3DS nella memoria interna in modo che possano essere acceduti anche senza una scheda SD inserita.
+In questa sezione, userai uno script per automatizzare l'installazione di homebrew, la pulizia della scheda SD e il backup dei file di sistema.
1. Spegni la tua console
1. Premi (Start) e accendi la console continuando a tenerlo premuto. Verrà avviato GodMode9
@@ -126,51 +101,17 @@ In questa sezione, userai uno script per copiare alcuni file di Luma3DS nella me
1. Se ti viene chiesto di reimpostare la data e l'ora dell'RTC, premi (A) per farlo, poi imposta la data e l'ora, infine premi (A) per continuare
1. Premi il pulsante HOME per far apparire il menu delle azioni
1. Seleziona "Scripts..."
-1. Seleziona "GM9Megascript"
-1. Seleziona "Scripts from Plailect's Guide"
-1. Seleziona "Setup Luma3DS to CTRNAND"
-1. Quando richiesto, premi (A) per procedere
-1. Premi il pulsante (A) per sbloccare i permessi di scrittura di primo livello su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
-1. Premi il pulsante (A) per continuare
-
-#### Sezione VIII - Pulizia della scheda SD
-
-In questa sezione, utilizzerai uno script per rimuovere alcuni file non necessari dalla scheda SD.
-
-1. Seleziona "Cleanup SD Card"
-1. Quando richiesto, premi (A) per procedere
-1. Premi il pulsante (A) per continuare
-1. Premi (B) per ritornare al menu principale
-
-#### Sezione IX - Backup dei File Essenziali
-
-In questa sezione, farai backup di file che possono essere utilizzati per il ripristino da malfunzioni software o per recuperare dei dati.
-
-1. Seleziona "Backup Options"
-1. Seleziona "SysNAND Backup"
-1. Premi (A) per confermare
- + Questo processo durerà un po'
- + Se ottieni un errore, cerca il tuo problema nella [guida per la risoluzione dei problemi](troubleshooting#finalizing-setup)
-1. Premi il pulsante (A) per continuare
-1. Premi (B) per ritornare al menu principale
-1. Seleziona "Exit"
-1. Se richiesto, premi (A) per ritirare le autorizzazioni di scrittura
-1. Entra nella cartella `[S:] SYSNAND VIRTUAL`
-1. Premi (A) su `essential.exefs` per selezionarlo
-1. Seleziona "Copy to 0:/gm9/out"
- + Se appare "Destination already exists", premi (A) su "Overwrite file(s)"
-1. Premi il pulsante (A) per continuare
-1. Premi il pulsante HOME per far apparire il menu delle azioni
-1. Seleziona "Poweroff system" per spegnere la console
+1. Seleziona "finalize"
+1. Segui le istruzioni dello script, rispondendo ad ogni domanda che ti viene posta
+ + Se riscontri un errore, segui le istruzioni riportate nel messaggio di errore o consulta la pagina [Risoluzione dei problemi](troubleshooting#finalizing-setup)
+1. Quando lo script mostrerà "Setup complete!", premi (A) per spegnere la console
+ + If you do NOT see the message "Setup complete!", the script was not successful and you will need to redo this section
1. Inserisci la scheda SD nel tuo computer
-1. Copia i file `__sysnand_##.bin`, `__sysnand_##.bin.sha` ed `essential.exefs` dalla cartella `/gm9/out/` della tua scheda SD in una posizione sicura sul tuo computer
- + Copia questi backup in più posti (ad esempio un archivio online, un disco rigido esterno, ecc.)
- + Questi backup ti salveranno da un brick e/o ti aiuteranno a recuperare i file dalla NAND nel caso dovesse accadere qualcosa in futuro
-1. Dopo la copia, elimina i file `__sysnand_##.bin` e `__sysnand_##.bin.sha` dalla cartella `/gm9/out/` della tua scheda SD
- + Gli altri file di backup sono di dimensioni trascurabili e possono essere conservati sulla tua scheda SD per comodità di accesso
-1. Se presente, copia la cartella `/luma/backups/` dalla tua scheda SD in una posizione sicura sul tuo computer
-1. Reinserisci la scheda SD nella tua console
-1. Accendi la tua console
+1. Copia la cartella `gm9/out` in una posizione sicura sul tuo computer
+ + Questa cartella contiene backup dei file critici e dovrebbe essere salvata in più posizioni (es. in cloud) se possibile
+ + I due file SysNAND sono il backup della NAND e possono essere utilizzati per ripristinare la console ad uno stato funzionante se viene resa inutilizzabile con un errore software
+ + Il file `essential.exefs` contiene i file univoci di sistema della tua console e può essere utilizzato per recuperare i tuoi dati in caso di guasto hardware
+1. Delete the contents of the `/gm9/out/` folder from your SD card
___
diff --git a/_pages/it_IT/homebrew-launcher-(smilehax-iie).txt b/_pages/it_IT/homebrew-launcher-(smilehax-iie).txt
index 4f9d4088d1..28bc9b645d 100644
--- a/_pages/it_IT/homebrew-launcher-(smilehax-iie).txt
+++ b/_pages/it_IT/homebrew-launcher-(smilehax-iie).txt
@@ -18,7 +18,7 @@ Questa guida non supporta la versione Giapponese di SmileBASIC.
+ Il gioco "SmileBASIC" installato sulla tua console
+ Se lo hai già scaricato in passato, puoi [riscaricarlo](https://en-americas-support.nintendo.com/app/answers/detail/a_id/607/~/how-to-download-or-redownload-content-in-nintendo-3ds-eshop)
+ La scheda SD deve essere inserita nella console per poter installare SmileBASIC
-+ L'ultima versione di [smilehax-IIe](https://github.com/zoogie/smilehax-IIe/releases/download/v1.0/Release_sh2e_v1.1.zip) (download diretto)
++ L'ultima versione di [smilehax-IIe](https://github.com/zoogie/smilehax-IIe/releases/download/v1.1/Release_sh2e_v1.1.zip) (download diretto)
+ L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (il file `.zip` di Luma3DS)
+ [otherapps.zip]({{ base_path }}/assets/otherapps.zip) (download diretto)
diff --git a/_pages/it_IT/include/addproxy.txt b/_pages/it_IT/include/addproxy.txt
index aba715031f..b9e2043753 100644
--- a/_pages/it_IT/include/addproxy.txt
+++ b/_pages/it_IT/include/addproxy.txt
@@ -1,6 +1,9 @@
Se non l'hai già fatto, assicurati di avere una connessione Internet funzionante configurata sulla tua console.
{: .notice--info}
+[Qui](/images/screenshots/set-proxy.png) è disponibile una guida visiva per questa sezione.
+{: .notice--success}
+
1. Avvia l'applicazione Impostazioni della console
1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento`
1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `Impostazioni proxy`
diff --git a/_pages/it_IT/include/ctrnand-datayeet.txt b/_pages/it_IT/include/ctrnand-datayeet.txt
index 16a84b3b6a..1f92fdbd52 100644
--- a/_pages/it_IT/include/ctrnand-datayeet.txt
+++ b/_pages/it_IT/include/ctrnand-datayeet.txt
@@ -1,4 +1,4 @@
-Questa sezione reimposterà la configurazione del sistema ai valori predefiniti. I giochi installati e i loro dati di salvataggio non verranno toccati. È necessario per prevenire problemi noti sulla modalità a memoria estesa e sulle applet di alcune console.
+Questa sezione ripristinerà la configurazione di sistema ai valori predefiniti. **I giochi installati e i loro dati di salvataggio non saranno influenzati.** È **necessario** per evitare problemi noti relativi alla modalità a memoria estesa e alle applet su alcune console.
1. Spegni la tua console
1. Premi e tieni premuto (Start), e mentre tieni premuto (Start), accendi la console. Verrà avviato GodMode9
diff --git a/_pages/it_IT/include/remove-usm-slottool.txt b/_pages/it_IT/include/remove-usm-slottool.txt
index ca45037e58..03dffcbc8f 100644
--- a/_pages/it_IT/include/remove-usm-slottool.txt
+++ b/_pages/it_IT/include/remove-usm-slottool.txt
@@ -1,6 +1,6 @@
In questa sezione avvierai l'Homebrew Launcher (utilizzando un custom firmware) in modo da poter ripristinare le configurazioni Wi-Fi sovrascritte nella Sezione I.
-1. Avvia l'applicazione "Modalità download"
+1. Avvia l'applicazione "Modalità download" (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
1. Attendi finché non vedrai i due pulsanti
+ Non premere alcun pulsante
1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina
diff --git a/_pages/it_IT/installing-boot9strap-(frogtool).txt b/_pages/it_IT/installing-boot9strap-(frogtool).txt
index 6d2ca27d01..872107b9b2 100644
--- a/_pages/it_IT/installing-boot9strap-(frogtool).txt
+++ b/_pages/it_IT/installing-boot9strap-(frogtool).txt
@@ -13,8 +13,7 @@ Per dettagli tecnici sugli exploit che utilizzerai in questa pagina, consulta "D
{: .notice--info}
-Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) per il file `frogcert.bin` di questa guida avrai bisogno di un client torrent come [qBittorrent](https://www.qbittorrent.org/download.php) o [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
-Se non sei in grado di installarne uno, segui invece [BannerBomb3](bannerbomb3).
+Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) per il file `frogcert.bin` di questa guida avrai bisogno di un client torrent come [qBittorrent](https://www.qbittorrent.org/download.php) o [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
### Cosa serve
diff --git a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
index 02d6bf7c74..84f928c307 100644
--- a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
@@ -27,6 +27,7 @@ Per seguire queste istruzioni, avrai bisogno di:
- Un secondo 3DS con custom firmware (il **3DS di partenza**) della stessa regione del 3DS che stai cercando di modificare (il **3DS di destinazione**)
- Le console devono essere di regionalità USA, JPN o EUR
+ - Se necessario, si può [cambiare la regionalità](region-changing) del 3DS di partenza perché corrisponda al 3DS di destinazione
- Una copia fisica o digitale di Mario Kart della stessa regione di entrambe le console
- Una scheda SD per entrambe le console
diff --git a/_pages/it_IT/installing-boot9strap-(menuhax).txt b/_pages/it_IT/installing-boot9strap-(menuhax).txt
new file mode 100644
index 0000000000..f02f7f87aa
--- /dev/null
+++ b/_pages/it_IT/installing-boot9strap-(menuhax).txt
@@ -0,0 +1,89 @@
+---
+title: "Installazione di boot9strap (menuhax)"
+---
+
+{% include toc title="Indice" %}
+
+{% capture technical_info %}
+Dettagli Tecnici (opzionale)
+
+Usiamo BannerBomb3 per installare menuhax67, che ci permette di accedere all'Homebrew Launcher. Da qui, eseguiremo uloader per avviare SafeB9SInstaller.
+
+Leggi [qui](https://github.com/zoogie/uloader) per informazioni su uloader e [qui](https://github.com/zoogie/menuhax67) per informazioni su menuhax67.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+Dovresti essere arrivato a questa pagina solo se esegui la versione 11.15.0 o 11.14.0. Se hai una versione del software maggiore di 11.15.0, uloader fallirà.
+{: .notice--warning}
+
+### Cosa serve
+
+* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (download diretto)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (download diretto)
+* L'ultima versione di [BannerBomb3](https://github.com/zoogie/Bannerbomb3/releases/download/v3.0/Release_v3.0.zip) (download diretto)
+* L'ultima versione di [uloader](https://github.com/zoogie/uloader/releases/download/1.0/uloader.3dsx) (download diretto)
+* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (il file `.zip` di Luma3DS)
+
+#### Sezione I - Preparazione
+
+1. Spegni la tua console
+1. Inserisci la scheda SD nel tuo computer
+1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD
+1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD
+1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD
+1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD
+1. Copia il file `bb3.bin` dall'archivio Release `.zip` nella directory principale della tua scheda SD, sovrascrivendo il file esistente
+1. Copia il file `Launcher.dat` dalla cartella per il modello e la regione della tua console all'interno dell'archivio Release `.zip` nella directory principale della tua scheda SD
+1. Se assente, crea una cartella chiamata `3ds` nella directory principale della tua scheda SD
+ + Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella `Nintendo 3DS` generata automaticamente dalla console
+1. Copia il file `uloader.3dsx` nella cartella `/3ds/` della tua scheda SD
+1. Reinserisci la scheda SD nella tua console
+
+#### Sezione II - BannerBomb3
+
+In questa sezione attiverai l'exploit BannerBomb3 utilizzando il menu Gestione Nintendo DSiWare con il quale installerai l'exploit menuhax67.
+
+1. Accendi la tua console
+1. Avvia le Impostazioni di sistema sulla tua console
+1. Entra in `Gestione dati` -> `DSiWare` -> `Scheda SD` ([image](/images/screenshots/bb3/dsiware-management.png))
+ + La tua console dovrebbe mostrare il menu BB3 multihax
+1. Usa il D-Pad per spostarti sul menu "Install *hax", quindi premi il pulsante (A)
+ + La tua console si riavvierà automaticamente
+
+#### Sezione III - menuhax67
+
+In questa sezione utilizzerai l'exploit menuhax67 appena installato per avviare uloader, che caricherà SafeB9SInstaller.
+
+1. Clicca sull'icona di impostazioni del menu HOME nell'angolo in alto a sinistra dello schermo inferiore (![]({{ "/images/homemenuicon.png" | absolute_url }}){: height="32px" width="52px"})
+ + Se la console si blocca per un po' e poi crasha, assicurati di avere il file Launcher.dat nella directory principale della tua scheda SD
+1. Se l'exploit ha avuto successo, la tua console avrà avviato l'Homebrew Launcher
+1. Avvia uloader dalla lista degli homebrew disponibili
+1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller
+ + Se la console si blocca o crasha, forza lo spegnimento della console, quindi ritenta questa sezione
+
+#### Sezione IV - Installazione di boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Sezione V - Rimozione di menuhax67
+
+In questa sezione avvierai l'exploit BannerBomb3 una seconda volta per poter disinstallare l'exploit menuhax67 che hai installato nella Sezione II. Questo renderà nuovamente possibile utilizzare normalmente le impostazioni del menu HOME.
+
+1. Avvia le Impostazioni di sistema sulla tua console
+1. Entra in `Gestione dati` -> `DSiWare` -> `Scheda SD` ([image](/images/screenshots/bb3/dsiware-management.png))
+1. Usa il D-Pad per spostarti sul menu "Uninstall *hax", quindi premi il pulsante (A)
+ + La tua console si riavvierà automaticamente
+1. Spegni la tua console
+1. Inserisci la scheda SD nel tuo computer
+1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare`
+1. Elimina il file `F0D43D5.bin` dalla cartella Nintendo DSiWare e dal tuo computer. Questo file non sarà più necessario
+
+___
+
+### Prosegui con il [Completamento dell'installazione](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt
index afe90171b3..85b6dc6b48 100644
--- a/_pages/it_IT/installing-boot9strap-(ntrboot).txt
+++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt
@@ -55,12 +55,12 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest
#### Sezione IV - Configurare Luma3DS
-1. Inserisci la scheda SD nel tuo computer
+1. Inserisci la scheda SD della console nel tuo computer
1. Elimina il file `boot.firm` dalla directory principale della tua scheda SD
1. Copia il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD
1. Reinserisci la scheda SD nella tua console
1. Accendi la tua console
-{%- include_relative include/configure-luma3ds.txt %}
+{% include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
diff --git a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
index 48719ae435..3f68e8fcc3 100644
--- a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt
@@ -23,9 +23,6 @@ Per dettagli tecnici sugli exploit che utilizzerai in questa pagina, leggi [qui]
SSLoth consente agli utenti alla versione di sistema 11.13.0 e precedenti di bypassare il controllo sulla versione del browser, permettendo l'uso di new-browserhax o old-browserhax (compatibile con tutte le versioni da 11.4.0 a 11.13.0 di ogni regionalità), che può quindi essere utilizzato in combinazione con universal-otherapp.
-Se hai aggiornato la tua console alla versione corrente utilizzando una cartuccia, non potrai evitare il controllo di versione del browser. Se questo è il caso, rimani alla tua versione corrente e chiedi aiuto nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp).
-{: .notice--warning}
-
### Cosa serve
* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (download diretto)
diff --git a/_pages/it_IT/region-changing.txt b/_pages/it_IT/region-changing.txt
index 9c08799364..1e0ce23095 100644
--- a/_pages/it_IT/region-changing.txt
+++ b/_pages/it_IT/region-changing.txt
@@ -13,7 +13,7 @@ Tuttavia, il cambio della regione è quasi completamente inutile in quanto Luma3
Questa pagina presuppone che tu abbia già installato Luma3DS e boot9strap. Se hai seguito questo sito web fino alla fine (Completamento dell'installazione), hai Luma3DS e boot9strap.
{: .notice--info}
-Come parte di questo processo, la configurazione di sistema verrà ripristinata ai valori predefiniti. Questo include dati come il tuo nome utente, il paese e la lingua. I giochi installati e i loro dati di salvataggio non verranno toccati.
+Come parte di questo processo, la configurazione di sistema verrà ripristinata ai valori predefiniti. Questo include dati come il tuo nome utente, il paese e la lingua. **I giochi installati e i loro dati di salvataggio non verranno toccati.**
{: .notice--warning}
{% capture notice-6 %}
@@ -21,7 +21,7 @@ Se cambi la regione della tua console:
+ Non potrai utilizzare il tuo NNID (se ne hai uno). I NNID sono assegnati alla regione in cui sono stati creati.
+ Potresti non essere in grado di accedere all'eShop, anche se [elimini il tuo account eShop](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account). Questo accade perché alcuni titoli rimangono collegati al 3DS, anche dopo la cancellazione dell'account (specialmente su New 3DS).
- + Anche se non è più possibile fare acquisti sull'eShop, è ancora possibile scaricare aggiornamenti dei giochi. Gli aggiornamenti sono di solito necessari per il gioco online.
+ + È ancora rilevante perché, nonostante non si possano più fare acquisti nell'eShop, vengono ancora ancora forniti gli aggiornamenti dei giochi. Gli aggiornamenti sono di solito necessari per il gioco online.
+ Questa logica si estende ai Trasferimenti dati, il che vuol dire che non puoi eseguire un Trasferimento dati da un 3DS USA ad un 3DS JPN la cui regionalità è stata cambiata in USA.
+ Detto questo, i Trasferimenti dati e gli aggiornamenti dei giochi sono comunque limitati dalla regionalità (es. l'eShop giapponese ha solo aggiornamenti per giochi giapponesi).
+ **Non sarai in grado di disinstallare un custom firmware senza brickare la console!** Se hai intenzione di disinstallare il custom firmware in futuro, **DEVI** ripristinare il backup della NAND creato prima del cambiamento di regione.
@@ -62,7 +62,7 @@ Per scaricare le immagini CTRTransfer di questa pagina avrai bisogno di un clien
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Sezione VI - Cancellare i dati di salvataggio del sistema
+#### Sezione VI - Risoluzione dei problemi di regionalità
{% include_relative include/ctrnand-datayeet.txt %}
diff --git a/_pages/it_IT/seedminer-(mii).txt b/_pages/it_IT/seedminer-(mii).txt
index 6f30d24f92..a308fa6773 100644
--- a/_pages/it_IT/seedminer-(mii).txt
+++ b/_pages/it_IT/seedminer-(mii).txt
@@ -5,7 +5,7 @@ title: "Seedminer (Mii)"
{% include toc title="Indice" %}
{% capture gpu_warning %}
-Questo metodo richiede una GPU ragionevolmente potente (una qualsiasi scheda grafica dedicata degli ultimi anni) e la possibilità di utilizzare una riga di comando. Se non sai cosa sono o non hai l'hardware necessario, puoi chiedere a qualcuno di farlo per te nel canale [Nintendo Homebrew su Discord](https://discord. g/MWxPgEp). Avrai bisogno di avere pronte le seguenti informazioni:
+Questo metodo richiede una GPU ragionevolmente potente (una qualsiasi scheda grafica dedicata degli ultimi anni) e la possibilità di utilizzare una riga di comando. Se non sai cosa sono o non hai l'hardware necessario, unisciti al canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp), apri il canale "#mii-mining-assistance" e fornisci quanto segue:
+ Il tuo codice QR Mii, caricato direttamente su Discord (non scattare uno screenshot o una foto dell'immagine, basta inviare l'immagine HNI_XXXX.JPG stessa)
+ ID0 della tua console (il nome della cartella a 32 caratteri dentro la cartella Nintendo 3DS - consulta [questa sezione](https://3ds.hacks.guide/troubleshooting#seedminer) se ne hai più di uno)
+ Il modello della tua console (ad es. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt
index 2a3c505082..aa2da36473 100644
--- a/_pages/it_IT/site-navigation.txt
+++ b/_pages/it_IT/site-navigation.txt
@@ -53,7 +53,7 @@ sitemap: false
+ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [Installazione di boot9strap (Fredtool)](installing-boot9strap-(fredtool))
+ [Installazione di boot9strap (Fredtool-Inject)](installing-boot9strap-(fredtool-inject))
-+ [Installazione di boot9strap (Fredtool, Legacy)](installing-boot9strap-(fredtool-legacy))
++ [Installazione di boot9strap (menuhax)](installing-boot9strap-(menuhax))
+ [Installazione di boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [Installazione di boot9strap (Hardmod)](installing-boot9strap-(hardmod))
+ [Installazione di boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
diff --git a/_pages/it_IT/troubleshooting.txt b/_pages/it_IT/troubleshooting.txt
index b455a21760..35e7716d17 100644
--- a/_pages/it_IT/troubleshooting.txt
+++ b/_pages/it_IT/troubleshooting.txt
@@ -34,6 +34,14 @@ Problemi dopo l’installazione:
### SigHaxed FIRM was not installed! Check lower screen for more info.
+{% capture compat %}
+MicroSD Card - init failed
+
+La tua scheda SD ha probabilmente qualcosa che non va. Prova a riformattarla ([Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)), [Linux](formatting-sd-(linux))). Se questo non risolve il problema, prova una scheda SD diversa.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
{% capture compat %}
SigHaxed FIRM - File not found
@@ -315,7 +323,7 @@ C'è un problema con il tuo file `otherapp.bin` (è mancante, mal posizionato o
{% capture compat %}
"Impossibile riprodurre"
-Hai il file Soundhax sbagliato per la tua console e regione, o la tua console è incompatibile con Soundhax. Nell'ultimo caso, dovresti aggiornare la tua console all'ultima versione e seguire [Seedminer](seedminer).
+Hai il file Soundhax sbagliato per la tua console e regione, o la tua console è incompatibile con Soundhax. In quest'ultimo caso, dovrai scoprire la versione presente sul tuo 3DS. Entra nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) per chiedere assistenza.
{% endcapture %}
{{ compat | markdownify }}
@@ -364,7 +372,7 @@ C'è un problema con il tuo file `arm11code.bin`. Scarica l'ultima versione di [
Gli exploit basati sul browser (come questo) sono instabili e crashano spesso, ma seguendo i seguenti passaggi, i problemi potrebbero venire risolti.
1. Avvia il browser internet, quindi apri le sue impostazioni
-1. Scorri in fondo e clicca su "Inizializza Savedata" (potrebbe anche chiamarsi "Elimina tutti i dati salvati")
+1. Scorri verso il basso e seleziona "Reimposta tutti i dati salvati" (può avere nomi simili come "Inizializza i dati di salvataggio" o "Elimina tutti i dati salvati")
1. Riprova ad eseguire l'exploit
{% endcapture %}
{{ compat | markdownify }}
@@ -407,10 +415,6 @@ Il file `SafeB9SInstaller.bin` è mancante o mal posizionato. Scarica l'ultima v
{% capture compat %}
Bloccato su "Doing agbhax..."
Potrebbe esserci un problema con il tuo file `arm11code.bin`. Riscarica l'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), posizionala nella directory principale della tua scheda SD` e rinominalo in `arm11code.bin`. Non aggiungere l'estensione `.bin` se non la vedi presente.
-
-Se hai una console taiwanese (con una T nella stringa della versione, ad esempio 11.3. -##T), non sarai in grado di seguire queste istruzioni e dovrai invece aggiornare la console ed eseguire [Seedminer](seedminer).
-
-Se hai una console dell'entroterra cinese (con una C nella stringa della versione, es. 11.3.0-##C), entra nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) per richiedere assistenza.
{% endcapture %}
{{ compat | markdownify }}
@@ -444,12 +448,35 @@ La data non è corretta. Per correggerla, segui questi passaggi:
1. Tocca i pulsanti su/giù per impostare il giorno, il mese e l'anno corretti.
1. Premi OK per confermare.
-Se il problema persiste e hai una versione di sistema che termina in E, e la lingua impostata in inglese, cambia **temporaneamente** la lingua in una diversa. Puoi ripristinare questo cambiamento quando arrivi al Completamento dell'installazione.
+Se il problema persiste:
+
+- Assicurati che i file `arm11code.bin`, `browserhax_hblauncher_ropbin_payload.bin` e `boot.3dsx` siano nella directory principale della scheda SD (non all'interno di una cartella)
+- Assicurati di aver selezionato il payload corretto per la tua regione E la versione di sistema
+- Assicurati che le impostazioni "Area di residenza" siano [così](/images/screenshots/skater_lang.png)
+- Prova a reimpostare i dati del browser:
+ 1. Avvia il browser internet, quindi apri le sue impostazioni
+ 1. Scorri verso il basso e seleziona "Reimposta tutti i dati salvati" (può avere nomi simili come "Inizializza i dati di salvataggio" o "Elimina tutti i dati salvati")
+ 1. Riprova ad eseguire l'exploit
+- Prova a cambiare la lingua di sistema in una lingua diversa da quella corrente
+
{% endcapture %}
{{ compat | markdownify }}
+
{% capture compat %}
-"Si è verificato un errore" o ErrDisp premendo GO! GO!
+"Si è verificato un errore. Tieni premuto il pulsante POWER per spegnere la console..." (schermo nero con testo)
+
+Il file `arm11code.bin` è mancante o mal posizionato. Make sure to copy the files of the [latest version of super-skaterhax](https://github.com/zoogie/super-skaterhax/releases/latest) for your region and version to the root of your SD card (not inside of a folder).
+
+![]({{ "/images/screenshots/skater-root-layout.png" | absolute_url }})
+{: .notice--info}
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+
+{% capture compat %}
+Si verifica un'eccezione oppure "DLL_HEAP_INFORMATION" premendo GO! GO!
Probabilmente significa che hai già un custom firmware. Dovresti [verificare la presenza di un CFW](checking-for-cfw).
@@ -476,28 +503,69 @@ I passaggi qui sotto possono essere seguiti in qualsiasi ordine, ma sono elencat
{{ compat | markdownify }}
{% capture compat %}
-Impossibile avviare il menu Rosalina per guasto ai pulsanti L / D-Pad Giù / Select
+Error #01: No Nintendo 3DS folder
+
+La tua scheda SD non ha una cartella `Nintendo 3DS`. Power on your device with your SD card inserted, then wait for the device to show a message box that says "Creating HOME Menu management information". Quando scompare il messaggio, spegni la console e riprova.
-Download this [alternate config.ini](/assets/config.ini) and place it in `/luma/`. Questo cambierà la combinazione di tasti del menù Rosalina in (X) + (Y).
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-All'avvio dell'Homebrew Launcher dalla "Modalità download" compare la scritta "Si è verificato un errore" o rimane fissa la schermata di caricamento "Nintendo 3DS"
+Error #02: Missing essential.exefs
+
+Hai risposto 'No' alla richiesta "Make essential files backup?" in GodMode9. Spegni la console, riaccendila tenendo premuto (Start) per avviare GodMode9, rispondi 'Yes' alla domanda, quindi riprova.
-C'è un problema con il tuo file `boot.3dsx` (è mancante, mal posizionato o corrotto). Scarica l'ultima versione dell'[Homebrew Launcher](https://github.com/devkitPro/3ds-hbmenu/releases/latest) e posiziona il file `boot.3dsx` nella directory principale della tua scheda SD, sostituendo qualunque file preesistente.
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"Scripts directory not found" in GodMode9
-Non hai copiato la cartella `gm9` presente nell'archivio `.zip` di GodMode9 nella directory principale della tua scheda SD. Scarica l'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) e posiziona la cartella `gm9` nella directory principale della tua scheda SD, unendola a quella preesistente.
+Impossibile avviare GodMode9 o Error #03: Missing files
+
+Non hai copiato tutto dall'archivio `finalize.zip` nella directory principale della tua scheda SD. Ricorda, la tua scheda SD deve avere almeno questi file:
+
+![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
+{: .notice--info}
+
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"Backup failed" o "Error: Could not open directory" durante il backup della NAND
+
+Error #04: No space
+
+Hai bisogno di almeno 1,3GB di spazio libero per eseguire il backup della NAND, che è una parte dello script. Se non hai abbastanza spazio, segui questi passaggi:
+
+1. Spegni la tua console
+1. Rimuovi la scheda SD e inseriscila nel tuo computer
+1. Copia la cartella `Nintendo 3DS` dalla directory principale della tua scheda SD al tuo computer
+1. Elimina la cartella `Nintendo 3DS` dalla scheda SD
+1. Reinserisci la scheda SD nella tua console
+1. Spegni la tua console, dopodiché riaccendila tenendo premuto il tasto START per avviare GodMode9
+1. Seleziona "Scripts..."
+1. Seleziona "finalize"
+1. Segui le istruzioni dello script, rispondendo ad ogni domanda che ti viene posta
+1. Copia i file in `gm9/out` sulla tua SD in una posizione sicura sul tuo computer
+1. Elimina i file `__sysnand_##.bin` e `__sysnand_##.bin.sha` dalla scheda SD, mantenendo il file `essential.exefs` in `/gm9/out/`
+1. Copia la cartella `Nintendo 3DS` dal tuo computer nella directory principale della tua scheda SD
+1. Elimina la cartella `Nintendo 3DS` dal tuo computer
+
+Al termine, riesegui lo script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Error #05: No title database
+
+Press (A) to create a title database, unlock SysNAND writing by entering the buttons on-screen, follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Error #06 or "Error: Could not open directory" when attempting a NAND backup
+
Assicurati di avere almeno 1.3GB disponibili nella tua scheda SD. Se non hai abbastanza spazio, segui questi passaggi:
1. Spegni la tua console
1. Rimuovi la scheda SD e inseriscila nel tuo computer
@@ -515,6 +583,14 @@ Se riieni di avere abbastanza spazio sulla tua scheda SD, questa potrebbe essere
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Error #08: Dummy title database
+
+You didn't delete the dummy title database that was created by Error #05. Segui le istruzioni [qui](/images/screenshots/database-reset.jpg), quindi esegui nuovamente lo script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
---
## Problemi di avvio su console con custom firmware
@@ -664,6 +740,13 @@ Se non sei stato in grado di trovare il tuo errore o le istruzioni non funzionan
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Avviare le impostazioni del menu HOME crasha la console o carica l'Homebrew Launcher
+
+Probabilmente la tua console ha ancora menuhax67 installato. Per disinstallare menuhax67, scarica l'ultima versione di [menuhax67](https://github.com/zoogie/menuhax67/releases/latest) (il file `.zip` di menuhax), quindi segui la [sezione "Uninstall menuhax67"](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits/menuhax67#Uninstall_menuhax67).
+{% endcapture %}
+{{ compat | markdownify }}
+
---
## Risoluzione di problemi ulteriori
@@ -699,6 +782,16 @@ Se non sei stato in grado di trovare il tuo errore o le istruzioni non funzionan
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Avvio manuale dell'Homebrew Launcher
+
+Se ti manca l'applicazione Homebrew Launcher dal menu HOME, puoi seguire queste istruzioni per avviarlo manualmente. (Avrai bisogno dei file [boot.3dsx e boot.firm](https://github.com/LumaTeam/Luma3DS/releases/latest) nella directory principale della tua scheda SD.)
+
+{% include_relative include/launch-hbl-dlp.txt %}
+
+{% endcapture %}
+{{ compat | markdownify }}
+
{% capture compat %}
Disattivare il Filtro famiglia
diff --git a/_pages/ja_JP/bannerbomb3-(legacy).txt b/_pages/ja_JP/bannerbomb3-(legacy).txt
index e414b2be6b..9bac526281 100644
--- a/_pages/ja_JP/bannerbomb3-(legacy).txt
+++ b/_pages/ja_JP/bannerbomb3-(legacy).txt
@@ -29,22 +29,7 @@ For a more technical explanation, see [here](https://github.com/zoogie/Bannerbom
{% include_relative include/bb3-prep.txt %}
-#### Section II - Hardware Button Check
-
-In this section, you will see whether you can access Safe Mode on your console. This will determine which method you will follow on the next page.
-
-Your SD card should remain in your computer while you perform this check.
-
-{% include_relative include/safemodecheck.txt %}
-
___
-### Next steps: Choose an exploit
-
-If the camera appeared in the previous section, Safe Mode is likely to be working on your console.
-
-If the camera appeared, continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
+### Continue to [Installing boot9strap (menuhax)](installing-boot9strap-(menuhax))
{: .notice--primary}
-
-If the camera did NOT appear, continue to [Installing boot9strap (Fredtool, Legacy)](installing-boot9strap-(fredtool-legacy))
-{: .notice--info}
diff --git a/_pages/ja_JP/ctrtransfer.txt b/_pages/ja_JP/ctrtransfer.txt
index 8e0ef30cec..c597388046 100644
--- a/_pages/ja_JP/ctrtransfer.txt
+++ b/_pages/ja_JP/ctrtransfer.txt
@@ -11,7 +11,7 @@ This is an add-on section for installing an 11.15.0 CTRTransfer image to your co
This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
{: .notice--info}
-As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+As a part of this process, your system settings will be reset to its defaults. This includes things such as your username, country, and language. **Installed games and their save data will not be affected.**
{: .notice--warning}
### 必要なもの
@@ -42,7 +42,7 @@ To download the CTRTransfer images on this page, you will need a torrent client
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Deleting system save data
+#### Section VI - Fixing locale-related issues
{% include_relative include/ctrnand-datayeet.txt %}
diff --git a/_pages/ja_JP/faq.txt b/_pages/ja_JP/faq.txt
index cbd1bd6f15..e69aca9e83 100644
--- a/_pages/ja_JP/faq.txt
+++ b/_pages/ja_JP/faq.txt
@@ -16,7 +16,7 @@ title: "よくある質問"
{% capture compat %}
I am on the latest system version. Is my console hackable without any external hardware/prerequisites?
-It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS is not.
+It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS XL is [able to be modded on 11.17.0](homebrew-launcher-(super-skaterhax)) without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS requires [additional software or hardware](alternate-exploits).
{% endcapture %}
{{ compat | markdownify }}
@@ -24,7 +24,7 @@ It depends on your console model. At the moment, New 3DS / New 3DS XL / New 2DS
{% capture compat %}
What consoles is this guide compatible with?
-The instructions are the same for all retail 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, and New 2DS XL consoles. If your system version string displays as "0.0.0-0", then you may have a developer unit.
+This guide is compatible with all retail 3DS-family devices (3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL). If your system version string is displayed as "0.0.0-0", then you may have a developer unit.
{% endcapture %}
{{ compat | markdownify }}
@@ -45,7 +45,7 @@ Yes! This guide will install a few useful homebrew applications, including [Univ
{% capture compat %}
Can I use this to play games from other regions?
-Yes; Luma3DS will automatically ignore the region check for cartridges and installed titles. Some games may need to make use of Luma's [locale emulation feature](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features) in order to work properly on out-of-region consoles.
+Yes; Luma3DS will automatically ignore the region check for cartridges and installed titles. Some games may need to make use of Luma's [locale emulation feature](https://wiki.hacks.guide/wiki/3DS:Setting_game_locales) in order to work properly on out-of-region consoles.
{% endcapture %}
{{ compat | markdownify }}
@@ -66,7 +66,9 @@ Your NNID (if you have one) will not be affected by this guide. Consoles with a
{% capture compat %}
Will my 3DS be banned for having CFW?
-There was a ban wave in May 2017 that banned CFW users from online play (eShop access, NNIDs, and Nintendo Accounts were unaffected), seemingly at random. A ban wave at such a scale has not been seen since. That being said, we don't know what Nintendo may have in store in the future. At this time, we don't think that bans are something that you need to worry about.
+There was a ban wave in May 2017 that banned CFW users from online play (eShop access, NNIDs, and Nintendo Accounts were unaffected), seemingly at random. A ban wave at such a scale has not been seen since. That being said, we don't know what Nintendo may have in store in the future.
+
+At this time, we don't think that bans are something that you need to worry about.
{% endcapture %}
{{ compat | markdownify }}
@@ -87,7 +89,9 @@ You will need at least 1.5GB of free SD card space to follow this guide in its e
{% capture compat %}
I heard about this thing I have to pay for (Gateway, Sky3DS, ntrboot, R4, etc). Is that something I need?
-No. Custom firmware can be installed for free on the latest firmware without any hardware devices. In fact, 3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
+At the moment, 3DS / 3DS XL / 2DS consoles on 11.17.0 need to use one of many [alternate exploits](alternate-exploits) to install custom firmware. If none of the other prerequisites are available, then ntrboot will be the cheapest available option (roughly $20 USD).
+
+3DS-mode flashcarts like Gateway and Sky3DS are not recommended because they are obsolete and may carry ban or brick risk.
{% endcapture %}
{{ compat | markdownify }}
@@ -147,7 +151,7 @@ It depends on the format of the homebrew application. Generally speaking:
You can continue to download game updates from the Nintendo eShop, even though it has now shut down.
-If the game is not from the same region as the console, you will need to [dump the updates](dumping-titles-and-game-cartridges) from a 3DS that has the updates installed. The Nintendo eShop only contains updates for the console's region (a Japanese 3DS will only have updates for Japanese games).
+If the game is not from the same region as the console, you will need to [dump the updates](dumping-titles-and-game-cartridges) from a 3DS that has the updates installed. The Nintendo eShop only contains updates for the console's region (for example, a Japanese 3DS will only have updates for Japanese games).
{% endcapture %}
{{ compat | markdownify }}
diff --git a/_pages/ja_JP/finalizing-setup.txt b/_pages/ja_JP/finalizing-setup.txt
index 87851a57aa..a2a657b130 100644
--- a/_pages/ja_JP/finalizing-setup.txt
+++ b/_pages/ja_JP/finalizing-setup.txt
@@ -8,17 +8,24 @@ title: "セットアップを完了する"
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND. In this case, we are using Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to patch the console, allowing it to run homebrew software.
-On this page, we will make critical system file backups and install the following homebrew programs:
+On this page, we will make critical system file backups and install some homebrew programs. Most of these steps will be automated using a script that you will run on your console.
-+ **FBI** *(installs CIA formatted applications)*
-+ **Anemone3DS** *(カスタムテーマをインストールできます)*
-**Checkpoint** *(3DSおよびDSゲーム用のセーブファイルの保存と復元ができます)*
-+ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)*
-+ **Hourglass9** *（NANDやゲームカードに関する機能があります）*
-+ **Homebrew Launcher Loader** *(Homebrew Launcherが開けます)*
+{% capture compat %}
+List of homebrew applications that will be installed
-It is not recommended to skip downloading any of these applications, as many of them will be used later on this page. At the end of this page, your SD card will be cleaned up by removing unnecessary installation files.
-{: .notice--warning}
+Click the links to view the GitHub repository of each application. (Give them a star if you appreciate them!)
+
++ **[FBI](https://github.com/Steveice10/FBI)** *(installs CIA formatted applications)*
++ **[Homebrew Launcher Loader](https://github.com/PabloMK7/homebrew_launcher_dummy)** *(launches the Homebrew Launcher)*
++ **[Anemone3DS](https://github.com/astronautlevel2/Anemone3DS)** *(installs custom themes)*
++ **[Checkpoint](https://github.com/FlagBrew/Checkpoint)** *(backs up and restores save files for 3DS and DS games)*
++ **[ftpd](https://github.com/mtheall/ftpd)** *(access your 3DS SD card wirelessly)*
++ **[Universal-Updater](https://github.com/Universal-Team/Universal-Updater/)** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)*
++ **[GodMode9](https://github.com/d0k3/GodMode9)** *(multipurpose tool which can do NAND and cartridge functions)*
+
+{% endcapture %}
+{{ compat | markdownify }}
+{: .notice--info}
### Compatibility Notes
@@ -30,12 +37,7 @@ If your previous CFW setup was EmuNAND-based and you wish to move the contents o
### 必要なもの
-* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
-* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
-* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
-* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
-* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)
+* [finalizing.zip]({{ base_path }}/assets/finalizing.zip) (direct download)
### 手順
@@ -45,26 +47,14 @@ In this section, you will copy the files necessary to follow the rest of the ins
1. Power off your console
1. パソコンにSDカードを入れます
-1. SDカード直下に `cias` フォルダが存在しない場合、作成します。
-1. Copy all of the CIA files (`Anemone3DS.cia`, `Checkpoint.cia`, `FBI.cia`, `Homebrew_Launcher.cia`, and `Universal-Updater.cia`) to the `/cias/` folder on your SD card
-1. SDカードの直下に`3ds`フォルダがない場合、そのフォルダを作成します
- + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the console automatically generates
-1. `FBI.3dsx`を、SDカードの`/3ds/`フォルダにコピーします。
-1. `payloads`というフォルダをSDカードの`luma`フォルダの中に存在しない場合は作成します
-1. `GodMode9.firm` を GodMode9の `.zip` から取り出し、SDカードの `/luma/payloads/` フォルダにコピーします。
-1. `gm9`フォルダをGodMode9`.zip`からSDカードのルートにコピーします。
-1. Reinsert your SD card into your console
-1. Power on your console
+1. Copy the contents of `finalizing.zip` to the root of your SD card, merging/replacing any existing folders if prompted
+1. Insert your SD card into your console
-The screenshots below indicate the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed.
+The screenshot below indicates the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed.
![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
{: .notice--info}
-![]({{ "/images/screenshots/godmode9-location.png" | absolute_url }})
-{: .notice--info}
-
-
#### Section II - CFW Check
さらなる安全対策として、カスタムファームウェアの追加チェックを行います。 If custom firmware is not installed by this point for any reason, the next section may render your console unable to be hacked without external hardware.
@@ -86,17 +76,12 @@ In this section, you will update your system to the latest version, which is saf
{% include_relative include/sysupdate.txt cfw="true" %}
-#### Section IV - Homebrew Launcher
-
-In this section, you will temporarily replace Download Play with Homebrew Launcher (which we need to launch FBI). Download Play will automatically go back to normal once you reboot your console.
-
-{% include_relative include/launch-hbl-dlp.txt %}
-
-#### Section V - RTC and DSP Setup
+#### Section IV - RTC and DSP setup
In this section, you will sync your 3DS internal clock with the actual time and dump the sound firmware (which is necesssary for some homebrew software to use sound properly).
1. (Lボタン) + (十字キー下) + (Select) を同時に押してRosalina menu を開きます
+ + If one of these buttons is broken, download [config.ini]({{ base_path }}/assets/config.ini) and put it in your `luma` folder, replacing the existing one. This will change the Rosalina menu key combination to (X) + (Y)
1. "Miscellaneous options"を選びます。
1. Select "Dump DSP firmware"
1. (B) ボタンで続行します
@@ -105,19 +90,9 @@ In this section, you will sync your 3DS internal clock with the actual time and
1. (B) を押してRosalinaメインメニューに戻ります
1. (B) を押してRosalinaメインメニューを終了します。
-#### Section VI - Installing CIAs
+#### Section V - Setup Script
-In this section, you will install several useful homebrew applications to HOME Menu.
-
-1. HomebrewメニューからFBIを起動します。
-1. SDカードのciasフォルダに移動します
-1. 「\」を選択します
-1. 「Install and delete all CIAs」を選択し、(A) を押して確認します
-1. Homeボタンを押しダウンロードプレイを閉じます。
-
-#### Section VII - CTRNAND Luma3DS
-
-In this section, you will use a script to copy some of Luma3DS's files to internal memory so that they can be accessed, even without an SD card inserted.
+In this section, you will use a script to automate homebrew installation, SD card cleanup, and system file backup.
1. Power off your console
1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
@@ -126,51 +101,17 @@ In this section, you will use a script to copy some of Luma3DS's files to intern
1. RTC日付/時刻を修正する場合、(A) ボタンを押し、日付や時刻を設定してください。終わったら、(A) を押してください。
1. (Home) ボタンを押してアクションメニューを呼び出します
1. "Scripts..."を選択します
-1. "GM9Megascript"を選択します
-1. "Scripts from Plailect's Guide"を選択します
-1. "Setup Luma3DS to CTRNAND"を選択します
-1. メッセージが表示されたら、(A) ボタンを押して続行します
-1. (A) を押してSysNAND(lvl1) 書き込みをロック解除し、与えられたキーコンボを入力します
-1. (A) で続行します
-
-#### Section VIII - Cleanup SD Card
-
-In this section, you will use a script to remove some unnecessary files from your SD card.
-
-1. "Cleanup SD Card"を選択します
-1. メッセージが表示されたら、(A) ボタンを押して続行します
-1. (A) で続行します
-1. Bキーを押してメインメニューに戻ります
-
-#### Section IX - Backup Essential Files
-
-In this section, you will make backups of files that can be used to recover from software bricks or to recover data.
-
-1. "Backup Options"を選択します
-1. "SysNAND Backup"を選択します
-1. (A) を押して確認します
- + この作業には少し時間がかかります
- + If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
-1. (A) で続行します
-1. Bキーを押してメインメニューに戻ります
-1. "Exit"を選択します。
-1. (A) ボタンを押すとNANDへの書き込みを再ロックできます
-1. Navigate to `[S:] SYSNAND VIRTUAL`
-1. Press (A) on `essential.exefs` to select it
-1. "Copy to 0:/gm9/out" を選択します
- + If you see "Destination already exists", press (A) on "Overwrite file(s)"
-1. (A) で続行します
-1. (Home) ボタンを押してアクションメニューを呼び出します
-1. Select "Poweroff system" to power off your console
+1. Select "finalize"
+1. Follow the prompts in the script, answering each question that you are asked
+ + If you encounter an error, follow the instructions in the error message or consult the [troubleshooting](troubleshooting#finalizing-setup) page
+1. Once the script says "Setup complete!", press (A) to power off the device
+ + If you do NOT see the message "Setup complete!", the script was not successful and you will need to redo this section
1. パソコンにSDカードを入れます
-1. Copy `__sysnand_##.bin`, `__sysnand_##.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
- + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
- + これらのバックアップはブリックした場合に、NANDイメージからファイルを復元することができます。
-1. Delete `__sysnand_##.bin` and `__sysnand_##.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
- + The other backup files are negligible in size and may be kept on your SD card for ease of access
-1. If you have it, copy the `/luma/backups/` folder on your SD card to a safe location on your computer
-1. Reinsert your SD card into your console
-1. Power on your console
+1. Copy the `/gm9/out/` folder to a safe location on your computer
+ + This folder contains critical file backups and should be backed up to multiple locations (i.e. cloud storage) if possible
+ + The two SysNAND files are your NAND backup and can be used to revert your console to a working state if it is bricked by a software issue
+ + The `essential.exefs` file contains your console's system-unique files and can be used to recover your data in the event of a hardware failure
+1. Delete the contents of the `/gm9/out/` folder from your SD card
___
diff --git a/_pages/ja_JP/homebrew-launcher-(smilehax-iie).txt b/_pages/ja_JP/homebrew-launcher-(smilehax-iie).txt
index e727e76533..aea849f046 100644
--- a/_pages/ja_JP/homebrew-launcher-(smilehax-iie).txt
+++ b/_pages/ja_JP/homebrew-launcher-(smilehax-iie).txt
@@ -18,7 +18,7 @@ This set of instructions does not support the Japanese version of SmileBASIC.
+ The game "SmileBASIC" installed on your console
+ If you have downloaded it before, you can [redownload it](https://en-americas-support.nintendo.com/app/answers/detail/a_id/607/~/how-to-download-or-redownload-content-in-nintendo-3ds-eshop)
+ Your SD card must be inserted in your console to install SmileBASIC
-+ The latest release of [smilehax-IIe](https://github.com/zoogie/smilehax-IIe/releases/download/v1.0/Release_sh2e_v1.1.zip) (direct download)
++ The latest release of [smilehax-IIe](https://github.com/zoogie/smilehax-IIe/releases/download/v1.1/Release_sh2e_v1.1.zip) (direct download)
+ The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+ [otherapps.zip]({{ base_path }}/assets/otherapps.zip) (direct download)
diff --git a/_pages/ja_JP/include/addproxy.txt b/_pages/ja_JP/include/addproxy.txt
index c3ff1efd82..46508d70ad 100644
--- a/_pages/ja_JP/include/addproxy.txt
+++ b/_pages/ja_JP/include/addproxy.txt
@@ -1,6 +1,9 @@
まだ設定していない場合は、本体にインターネット接続を設定してください。
{: .notice--info}
+A visual guide is available for this section [here](/images/screenshots/set-proxy.png).
+{: .notice--success}
+
1. 本体設定を開きます。
1. `インターネット設定` → `インターネット接続設定` に移動します。
1. 使用している接続先を選んで `設定変更` → `次ページ(右矢印)` → `Proxyの設定` と進みます。
diff --git a/_pages/ja_JP/include/ctrnand-datayeet.txt b/_pages/ja_JP/include/ctrnand-datayeet.txt
index 98a6e89c0b..48725f8e93 100644
--- a/_pages/ja_JP/include/ctrnand-datayeet.txt
+++ b/_pages/ja_JP/include/ctrnand-datayeet.txt
@@ -1,4 +1,4 @@
-This section will reset your system configuration to its defaults. Installed games and their save data will not be affected. This is necessary to prevent known issues relating to extended memory mode and applets on some consoles.
+This section will reset your system settings to its defaults. **Installed games and their save data will not be affected.** This is **required** to prevent known issues relating to extended memory mode and applets on some consoles.
1. Power off your console
1. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
diff --git a/_pages/ja_JP/include/remove-usm-slottool.txt b/_pages/ja_JP/include/remove-usm-slottool.txt
index 127c6d2d08..3d036c6b63 100644
--- a/_pages/ja_JP/include/remove-usm-slottool.txt
+++ b/_pages/ja_JP/include/remove-usm-slottool.txt
@@ -1,6 +1,6 @@
In this section, you will enter the Homebrew Launcher (using custom firmware) so that you can restore the Wi-Fi connection slots that were overwritten in Section I.
-1. 再度ダウンロードプレイアプリを開きます。
+1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
1. 画面が表示されるまで待ちます
+ Do not press either of the buttons
1. (Lボタン) + (十字キー下) + (Select) を同時に押してRosalina menu を開きます
diff --git a/_pages/ja_JP/installing-boot9strap-(frogtool).txt b/_pages/ja_JP/installing-boot9strap-(frogtool).txt
index cd6b463e11..43bd8e1ff5 100644
--- a/_pages/ja_JP/installing-boot9strap-(frogtool).txt
+++ b/_pages/ja_JP/installing-boot9strap-(frogtool).txt
@@ -13,8 +13,7 @@ For technical details on the exploits that you will be using on this page, see "
{: .notice--info}
-To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download). \
-If you are unable to install one, follow [BannerBomb3](bannerbomb3) instead.
+To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) link for `frogcert.bin` on this page, you will need a torrent client like [qBittorrent](https://www.qbittorrent.org/download.php) or [Deluge](http://dev.deluge-torrent.org/wiki/Download).
{: .notice--warning}
### 必要なもの
diff --git a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
index daabf8ea6c..4afd6cb95a 100644
--- a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
@@ -27,6 +27,7 @@ In order to follow these instructions, you will need the following:
- A second 3DS with custom firmware (the **source 3DS**) that is the same region as the 3DS you are trying to modify (the **target 3DS**)
- The consoles must be USA, JPN, or EUR region consoles
+ - The source 3DS can be [region changed](region-changing) to match the target 3DS if necessary
- A physical or digital copy of Mario Kart 7 that is the same region as both consoles
- An SD card for both consoles
diff --git a/_pages/ja_JP/installing-boot9strap-(menuhax).txt b/_pages/ja_JP/installing-boot9strap-(menuhax).txt
new file mode 100644
index 0000000000..3c20d14f2e
--- /dev/null
+++ b/_pages/ja_JP/installing-boot9strap-(menuhax).txt
@@ -0,0 +1,89 @@
+---
+title: "Installing boot9strap (menuhax)"
+---
+
+{% include toc title="目次" %}
+
+{% capture technical_info %}
+Technical Details (optional)
+
+We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+See [here](https://github.com/zoogie/uloader) for information about uloader and [here](https://github.com/zoogie/menuhax67) for information about menuhax67.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+You should only be able to get to this page if you are running version 11.15.0 or 11.14.0. If you are on any firmware above 11.15.0, uloader will fail.
+{: .notice--warning}
+
+### 必要なもの
+
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
+* The latest release of [BannerBomb3](https://github.com/zoogie/Bannerbomb3/releases/download/v3.0/Release_v3.0.zip) (direct download)
+* The latest release of [uloader](https://github.com/zoogie/uloader/releases/download/1.0/uloader.3dsx) (direct download)
+* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
+
+#### セクション I - 準備
+
+1. Power off your console
+1. パソコンにSDカードを入れます
+1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします
+1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。
+1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。
+1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします
+1. Copy `bb3.bin` from the Release `.zip` to the root of your SD card, replacing the current file
+1. Copy `Launcher.dat` from the folder for your model and region inside the Release `.zip` to the root of your SD card
+1. SDカードの直下に`3ds`フォルダがない場合、そのフォルダを作成します
+ + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the console automatically generates
+1. Copy `uloader.3dsx` to the `/3ds/` folder on your SD card
+1. Reinsert your SD card into your console
+
+#### セクション II - BannerBomb3
+
+In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
+
+1. Power on your console
+1. Launch System Settings on your console
+1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
+ + Your console should show the BB3 multihax menu
+1. Use the D-Pad to navigate and press the (A) button to select "Install *hax"
+ + Your console will automatically reboot
+
+#### Section III - menuhax67
+
+In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+1. Tap on the small HOME Menu settings icon in the top left of the bottom screen (![]({{ "/images/homemenuicon.png" | absolute_url }}){: height="32px" width="52px"})
+ + If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+1. If the exploit was successful, your console will have booted into the Homebrew Launcher
+1. Launch uloader from the list of homebrew
+1. Exploitが成功すれば、SafeB9SInstallerが起動されます。
+ + If the console freezes or crashes, force power off the console, then retry this section
+
+#### Section IV - Installing boot9strap
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section V - Removing menuhax67
+
+In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+1. Launch System Settings on your console
+1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
+1. Use the D-Pad to navigate and press the (A) button to select "Uninstall *hax"
+ + Your console will automatically reboot
+1. Power off your console
+1. パソコンにSDカードを入れます
+1. SDカードの`Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare`へ移動します
+1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder and from your computer. このファイルはもう必要ありません。
+
+___
+
+[セットアップを完了する](finalizing-setup) へ進みます
+{: .notice--primary}
diff --git a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
index 54f71ac67f..070fa91964 100644
--- a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
@@ -55,12 +55,12 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
#### セクション IV - Luma3DSを設定する
-1. パソコンにSDカードを入れます
+1. ゲーム機のSDカードをPCに挿入します
1. SDカードのルートにある既存の`boot.firm`を削除します
1. Luma3DS `.zip` から `boot.firm` をSDカードのルートにコピーします
1. Reinsert your SD card into your console
1. Power on your console
-{%- include_relative include/configure-luma3ds.txt %}
+{% include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
diff --git a/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt b/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt
index f6a3aca4d1..458e8d1372 100644
--- a/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt
@@ -23,9 +23,6 @@ For technical details on the exploits that you will be using on this page, see [
SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing the use of new-browserhax or old-browserhax (compatible with versions 11.4.0 through 11.13.0 in all regions), which can then be used in conjunction with universal-otherapp.
-If you have updated your console to your current version using a cartridge, you will not be able to bypass the browser version check. If this is the case, stay on your current firmware and ask [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for help.
-{: .notice--warning}
-
### 必要なもの
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
diff --git a/_pages/ja_JP/region-changing.txt b/_pages/ja_JP/region-changing.txt
index 8c2a59aeb8..38925c6ba4 100644
--- a/_pages/ja_JP/region-changing.txt
+++ b/_pages/ja_JP/region-changing.txt
@@ -13,7 +13,7 @@ Note that region changing is almost completely unnecessary since Luma3DS support
This page assumes that you have already installed Luma3DS and boot9strap. If you followed this website to the end (Finalizing Setup), you have Luma3DS and boot9strap.
{: .notice--info}
-As a part of this process, your system configuration will be reset to its defaults. This includes things such as your username, country, and language. Installed games and their save data will not be affected.
+As a part of this process, your system settings will be reset to its defaults. This includes things such as your username, country, and language. **Installed games and their save data will not be affected.**
{: .notice--warning}
{% capture notice-6 %}
@@ -21,7 +21,7 @@ If you change the region of your console:
+ You will not be able to use your NNID (if you have one). NNIDs are locked to the region that they were created in.
+ You may not be able to access the eShop, even if you [delete your eShop account](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account) beforehand. This is because certain titles tend to remain linked to the 3DS, even after account deletion (especially on New 3DS).
- + While purchases can no longer be made on eShop, game updates can still be downloaded. Updates are usually required for online play.
+ + This is still relevant because, while purchases can no longer be made on eShop, game updates are still being provided. Updates are usually required for online play.
+ This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
+ That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
+ **You will not be able to uninstall custom firmware without bricking the console!** If you intend to uninstall custom firmware in the future, you **MUST** restore your NAND backup that was created before the region change.
@@ -62,7 +62,7 @@ To download the CTRTransfer images on this page, you will need a torrent client
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### Section VI - Deleting system save data
+#### Section VI - Fixing locale-related issues
{% include_relative include/ctrnand-datayeet.txt %}
diff --git a/_pages/ja_JP/seedminer-(mii).txt b/_pages/ja_JP/seedminer-(mii).txt
index 5d2c57c1fa..96e991d767 100644
--- a/_pages/ja_JP/seedminer-(mii).txt
+++ b/_pages/ja_JP/seedminer-(mii).txt
@@ -5,7 +5,7 @@ title: "Seedminer (Mii)"
{% include toc title="目次" %}
{% capture gpu_warning %}
-This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don't know what those are or do not have the hardware necessary, you can ask someone to do this for you at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp). You will need to have the following information ready:
+This method requires a reasonably powerful GPU (any dedicated graphics card made in the last few years) and the ability to use a command line. If you don't know what those are or do not have the hardware necessary, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp), open the "#mii-mining-assistance" channel and provide the following:
+ Your Mii QR code, uploaded directly to Discord (do not take a screenshot or a photo of the image, just send the HNI_XXXX.JPG image itself)
+ Your console's ID0 (the name of the 32-character folder directly inside of Nintendo 3DS - see [this troubleshooting section](https://3ds.hacks.guide/troubleshooting#seedminer) if you have multiple)
+ Your console model (e.g. 3DS, 3DS XL, 2DS, New3DS, New3DS XL, New2DS XL)
@@ -41,7 +41,7 @@ If you are on Linux or macOS, replace `py -3` with `python3` in all commands.
In this section, you will set up Seedminer and obtain your console's files that are needed for mining.
-1. Extract the contents of the Seedminer `.zip` and move the folder with your operating systeem's name to anywhere on your PC
+1. Extract the contents of the Seedminer `.zip` and move the folder with your operating system's name to anywhere on your PC
+ Keep this location handy, as this Seedminer folder will be where multiple other files are placed
1. In the Seedminer folder, hold SHIFT and right-click anywhere in the folder's empty space, then click the option that opens Terminal, PowerShell, or Command Prompt
1. In the command line window, type `py -3 -m pip install pycryptodomex`, hit ENTER, and allow it to install
diff --git a/_pages/ja_JP/site-navigation.txt b/_pages/ja_JP/site-navigation.txt
index d0d2521b8e..81ae50d476 100644
--- a/_pages/ja_JP/site-navigation.txt
+++ b/_pages/ja_JP/site-navigation.txt
@@ -53,7 +53,7 @@ sitemap: false
+ [Homebrew Launcher (super-skaterhax)](homebrew-launcher-(super-skaterhax))
+ [boot9strapの導入 (Fredtool)](installing-boot9strap-(fredtool))
+ [Installing boot9strap (Fredtool-Inject)](installing-boot9strap-(fredtool-inject))
-+ [Installing boot9strap (Fredtool, Legacy)](installing-boot9strap-(fredtool-legacy))
++ [Installing boot9strap (menuhax)](installing-boot9strap-(menuhax))
+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
+ [boot9strapの導入 (Hardmod)](installing-boot9strap-(hardmod))
+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
diff --git a/_pages/ja_JP/troubleshooting.txt b/_pages/ja_JP/troubleshooting.txt
index bfcda1a94c..712423f74c 100644
--- a/_pages/ja_JP/troubleshooting.txt
+++ b/_pages/ja_JP/troubleshooting.txt
@@ -34,6 +34,14 @@ Issues after installation:
### SigHaxed FIRM was not installed! Check lower screen for more info.
+{% capture compat %}
+MicroSD Card - init failed
+
+Your SD card is most likely acting weird. Try reformatting your SD card ([Windows](formatting-sd-(windows)), [macOS](formatting-sd-(mac)), [Linux](formatting-sd-(linux))). If this doesn't work, try another SD card.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
{% capture compat %}
SigHaxed FIRM - File not found
@@ -315,7 +323,7 @@ There is an issue with your `otherapp.bin` file (it is missing, misplaced, or co
{% capture compat %}
"Could not play"
-You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, you should update your console to the latest version and follow [Seedminer](seedminer).
+You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance.
{% endcapture %}
{{ compat | markdownify }}
@@ -364,7 +372,7 @@ There is an issue with your `arm11code.bin` file. Download the latest release of
Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.
1. Launch the browser, then launch the browser settings
-1. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data)
+1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data")
1. Try the exploit again
{% endcapture %}
{{ compat | markdownify }}
@@ -407,10 +415,6 @@ The file `SafeB9SInstaller.bin` is missing or misplaced. Download the latest rel
{% capture compat %}
Frozen on "Doing agbhax..."
There may be an issue with your `arm11code.bin` file. Re-download the latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest), place it on the root of your SD card, and rename it to `arm11code.bin`. Do not add the `.bin` extension if you do not already see it.
-
-If you have a Taiwanese unit (with a T in the version string, ie. 11.3.0-##T), you will not be able to follow these instructions, and you will need to update your console and follow [Seedminer](seedminer) instead.
-
-If you have a Mainland Chinese unit (with a C in the version string, ie. 11.3.0-##C), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) for assistance.
{% endcapture %}
{{ compat | markdownify }}
@@ -444,12 +448,35 @@ The date is set incorrectly. To set it correctly, follow these steps:
1. Tap Up/Down Arrows to set the correct Day, Month and Year.
1. Select OK to confirm.
-If the problem persists and you have a system version ending in E, and the language set to English, change the language to any other language **temporarily**. You can revert this change when you reach Finalizing Setup.
+If the problem persists:
+
+- Ensure that `arm11code.bin`, `browserhax_hblauncher_ropbin_payload.bin`, and `boot.3dsx` are on the root of the SD card (not inside of any folder)
+- Ensure that you selected the correct payload for your region AND system version
+- Ensure that your region settings look [like this](/images/screenshots/skater_lang.png)
+- Try resetting your browser data:
+ 1. Launch the browser, then launch the browser settings
+ 1. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initilize Save Data" or "Clear All Save Data")
+ 1. Try the exploit again
+- Try changing the system language to something other than the current language
+
{% endcapture %}
{{ compat | markdownify }}
+
{% capture compat %}
-An exception occured or ErrDisp when pressing GO! GO!
+"An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)
+
+The file `arm11code.bin` is missing or misplaced. Make sure to copy the files of the [latest version of super-skaterhax](https://github.com/zoogie/super-skaterhax/releases/latest) for your region and version to the root of your SD card (not inside of a folder).
+
+![]({{ "/images/screenshots/skater-root-layout.png" | absolute_url }})
+{: .notice--info}
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+
+{% capture compat %}
+An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!
This likely indicates that you already have custom firmware. You should [check for CFW](checking-for-cfw).
@@ -476,28 +503,69 @@ The steps below can be attempted in any order, but are listed from easiest to ha
{{ compat | markdownify }}
{% capture compat %}
-Unable to enter Rosalina menu due to broken Left Shoulder / Down D-Pad / Select button(s)
+Error #01: No Nintendo 3DS folder
+
+Your SD card does not have the `Nintendo 3DS` folder. Power on your device with your SD card inserted, then wait for the device to show a message box that says "Creating HOME Menu management information". Once the message box disappears, power off your device and try again.
-Download this [alternate config.ini](/assets/config.ini) and place it in `/luma/`. This will change the Rosalina key combination to (X) + (Y).
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"An exception occurred" or infinite "Nintendo 3DS" screen after trying to launch Homebrew Launcher from Download Play
+Error #02: Missing essential.exefs
+
+You said 'No' to the "Make essential files backup?" prompt in GodMode9. Power off your device, power it on while holding (Start) to re-enter GodMode9, say 'Yes' to the prompt, then try again.
-There is an issue with your `boot.3dsx` file (it is missing, misplaced, or corrupted). Download the latest release of [the Homebrew Launcher](https://github.com/devkitPro/3ds-hbmenu/releases/latest) and place `boot.3dsx` on the root of your SD card, replacing any existing file.
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"Scripts directory not found" in GodMode9
-You did not copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card. Download the latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) and place the `gm9` folder on the root of your SD card, merging it with the existing one.
+Unable to open GodMode9 or Error #03: Missing files
+
+You did not copy everything from `finalize.zip` to the root of your SD card. Remember, your SD card should have at least these files:
+
+![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
+{: .notice--info}
+
{% endcapture %}
{{ compat | markdownify }}
{% capture compat %}
-"Backup failed" or "Error: Could not open directory" when attempting a NAND backup
+
+Error #04: No space
+
+You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don't have enough space, follow these steps:
+
+1. Power off your console
+1. Remove the SD card and insert it into your computer
+1. Copy the `Nintendo 3DS` folder from the root of your SD card to your computer
+1. Delete the Nintendo 3DS folder from the SD card
+1. Reinsert your SD card into your console
+1. Power off your console, hold START and power on still holding START to boot on GodMode9
+1. "Scripts..."を選択します
+1. Select "finalize"
+1. Follow the prompts in the script, answering each question that you are asked
+1. Copy the files in `gm9/out` on your SD to a safe location on your computer
+1. Delete the `__sysnand_##.bin` and `__sysnand_##.bin.sha` files from the SD card, keeping essential.exefs in `/gm9/out/`
+1. Copy the `Nintendo 3DS` folder from your computer to the root of your SD card
+1. Delete the `Nintendo 3DS` folder from your computer
+
+Once done, re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Error #05: No title database
+
+Press (A) to create a title database, unlock SysNAND writing by entering the buttons on-screen, follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
+{% capture compat %}
+Error #06 or "Error: Could not open directory" when attempting a NAND backup
+
Make sure you have at least 1.3GB available in your SD card. If you don't have enough space, follow these steps:
1. Power off your console
1. Remove the SD card and insert it into your computer
@@ -515,6 +583,14 @@ If you have enough space on your SD card, your SD might be corrupted or faulty.
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Error #08: Dummy title database
+
+You didn't delete the dummy title database that was created by Error #05. Follow the prompts [here](/images/screenshots/database-reset.jpg), then re-run the script.
+
+{% endcapture %}
+{{ compat | markdownify }}
+
---
## Boot issues on consoles with custom firmware
@@ -664,6 +740,13 @@ If you weren't able to find your error or the instructions didn't work, join [Ni
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher
+
+Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of [menuhax67](https://github.com/zoogie/menuhax67/releases/latest) (the menuhax `.zip`), then follow the ["Uninstall menuhax67" section](https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits/menuhax67#Uninstall_menuhax67) here.
+{% endcapture %}
+{{ compat | markdownify }}
+
---
## Other troubleshooting
@@ -699,6 +782,16 @@ If you weren't able to find your error or the instructions didn't work, join [Ni
{% endcapture %}
{{ compat | markdownify }}
+{% capture compat %}
+Manually entering Homebrew Launcher
+
+If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need [boot.3dsx and boot.firm](https://github.com/LumaTeam/Luma3DS/releases/latest) on the root of your SD card.)
+
+{% include_relative include/launch-hbl-dlp.txt %}
+
+{% endcapture %}
+{{ compat | markdownify }}
+
{% capture compat %}
Turning off Parental Controls
diff --git a/_pages/ko_KR/alternate-exploits.txt b/_pages/ko_KR/alternate-exploits.txt
index 5c58ca9d01..1a3a4a9076 100644
--- a/_pages/ko_KR/alternate-exploits.txt
+++ b/_pages/ko_KR/alternate-exploits.txt
@@ -1,21 +1,21 @@
---
-title: "Alternate Exploits"
+title: "대체 취약점"
---
{% include toc title="목차" %}
-3DS / 3DS XL / 2DS consoles on firmware 11.17.0 do not currently have any free, software-only methods. Therefore, all of the methods here have some sort of prerequisite.
+펌웨어 11.17.0의 3DS / 3DS XL/ 2DS 콘솔에는 현재 무료 소프트웨어 전용 방법이 없습니다. 따라서 여기에 있는 모든 방법에는 일종의 전제 조건이 있습니다.
### 설치 된 e숍 타이틀
-Because Nintendo eShop no longer allows purchases, it is no longer possible to purchase new titles. However, you can re-download a title if you had purchased or downloaded them before purchases stopped being possible.
+Nintendo e숍에서 더 이상 구매할 수 없기 때문에 더 이상 새 타이틀들을 구매할 수 없습니다. 그러나 구매 기능이 중단되기 전에 구매했거나 다운로드한 타이틀은 다시 다운로드할 수 있습니다.
-Any one of the following titles can be used in conjunction with Seedminer to install custom firmware:
+다음 타이틀 중 하나를 Seedminer와 함께 사용하여 커스텀 펌웨어를 설치할 수 있습니다:
* 포켓몬 피크로스 (무료 게임)
* Steel Diver: Sub Wars (무료 게임)
-* ANY [DSiWare](https://en.wikipedia.org/wiki/List_of_DSiWare_games_and_applications) title (free or paid)
+* 아무 [DSiWare](https://en.wikipedia.org/wiki/List_of_DSiWare_games_and_applications) 타이틀 (무료 및 유료)
-Continue to [Seedminer (Alternate)](seedminer-(alternate))
+[Seedminer (대체)](seedminer-(alternate)) 로 계속합니다
{: .notice--primary}
또는, SmileBASIC (유료 게임)을 사용해 Seedminer 없이 Homebrew Launcher를 실행할 수 있습니다.
@@ -24,7 +24,7 @@ Continue to [Seedminer (Alternate)](seedminer-(alternate))
{: .notice--primary}
-### Retail 3DS cartridges
+### 정품 3DS 카트리지
#### ninjhax2-dx
@@ -41,11 +41,11 @@ Continue to [Seedminer (Alternate)](seedminer-(alternate))
{: .notice--primary}
-### Additional hardware
+### 추가 하드웨어
#### kartdlphax
-This method uses another 3DS with custom firmware and a digital or cartridge copy of Mario Kart 7.
+이 방법은 커스텀 펌웨어가 있는 다른 3DS와 마리오 카트 7의 디지털 또는 카트리지 버전을 사용합니다.
[boot9strap 설치 (kartdlphax)](installing-boot9strap-(kartdlphax))로 계속합니다
{: .notice--primary}
@@ -54,7 +54,7 @@ This method uses another 3DS with custom firmware and a digital or cartridge cop
This method requires a compatible DS flashcart to be flashed with ntrboot, which works on all 3DS-family consoles regardless of model or region.
-If none of the above options are available to you, this is the cheapest available option. If you don't already have a compatible cartridge, a preflashed ntrboot-compatible cartridge can be purchased [here](https://www.nds-card.com/ProShow.asp?ProID=575) for roughly $20 USD.
+위의 옵션 중 어느 것도 사용할 수 없는 경우 이것이 가장 저렴한 옵션입니다. 아직 호환되는 카트리지가 없는 경우 미리 플래시된 ntrboot 호환 카트리지를 [여기 (영어)](https://www.nds-card.com/ProShow.asp?ProID=575)에서 약 $20 USD에 구입할 수 있습니다.
[ntrboot](ntrboot)으로 계속합니다
{: .notice--primary}
diff --git a/_pages/ko_KR/bannerbomb3-(legacy).txt b/_pages/ko_KR/bannerbomb3-(legacy).txt
index 0f4e19788b..9bdbe5b98d 100644
--- a/_pages/ko_KR/bannerbomb3-(legacy).txt
+++ b/_pages/ko_KR/bannerbomb3-(legacy).txt
@@ -29,22 +29,7 @@ title: "BannerBomb3 (레거시)"
{% include_relative include/bb3-prep.txt %}
-#### 섹션 II - 하드웨어 버튼 작동 확인
-
-이 섹션에서는 콘솔의 안전 모드 기능을 사용 할 수 있는지 테스트할 것 입니다. 이 테스트를 통해, 다음 페이지에서 어떤 방법을 취해야 할지 결정할 수 있습니다.
-
-이 과정이 끝날 때까지 SD 카드가 컴퓨터에 연결되어 있어야 합니다.
-
-{% include_relative include/safemodecheck.txt %}
-
___
-### 다음 단계: 익스플로잇 선택
-
-이전 섹션에서 카메라가 표시되었다면, 안전 모드가 정상적으로 실행될 수 있을 것입니다.
-
-카메라가 실행되었다면, [boot9strap 설치 (USM)](installing-boot9strap-(usm))으로 계속합니다
+### Continue to [Installing boot9strap (menuhax)](installing-boot9strap-(menuhax))
{: .notice--primary}
-
-카메라가 실행되지 않았다면, [boot9strap 설치 (Fredtool, 레거시)](installing-boot9strap-(fredtool-legacy))로 계속합니다
-{: .notice--info}
diff --git a/_pages/ko_KR/ctrtransfer.txt b/_pages/ko_KR/ctrtransfer.txt
index 65c745890d..a7a648c189 100644
--- a/_pages/ko_KR/ctrtransfer.txt
+++ b/_pages/ko_KR/ctrtransfer.txt
@@ -11,7 +11,7 @@ title: "CTRTransfer"
이 페이지에서는 이미 Luma3DS와 boot9strap이 설치되어 있는 것으로 가정합니다. 이 웹사이트를 끝까지 진행했다면 (마무리 단계), Luma3DS와 boot9strap이 설치되어 있는 것입니다.
{: .notice--info}
-이 과정의 일부분으로, 시스템 설정을 초기화하게 됩니다. 이것은 사용자 이름, 국가, 언어 등을 포함합니다. 설치된 게임과 세이브 데이터에는 영향을 주지 않습니다.
+As a part of this process, your system settings will be reset to its defaults. 이것은 사용자 이름, 국가, 언어 등을 포함합니다. **Installed games and their save data will not be affected.**
{: .notice--warning}
### 준비물
@@ -43,7 +43,7 @@ title: "CTRTransfer"
{% include_relative include/ctrtransfer-ticket-copy.txt %}
-#### 섹션 VI - 시스템 세이브 데이터 초기화
+#### Section VI - Fixing locale-related issues
{% include_relative include/ctrnand-datayeet.txt %}
diff --git a/_pages/ko_KR/dumping-eshop-dsiware.txt b/_pages/ko_KR/dumping-eshop-dsiware.txt
index 14487371f2..5d65556aa9 100644
--- a/_pages/ko_KR/dumping-eshop-dsiware.txt
+++ b/_pages/ko_KR/dumping-eshop-dsiware.txt
@@ -2,7 +2,7 @@
title: "eShop DSiWare 덤프"
---
-On this page, you will dump an installed DSiWare title from the eShop to your SD card.
+이 페이지에서는 설치된 DSiWare 타이틀을 e숍에서 SD 카드로 덤프 할 것 입니다.
## 진행 방법
@@ -11,7 +11,7 @@ On this page, you will dump an installed DSiWare title from the eShop to your SD
+ A DSiWare title's banner will be a white box with an icon inside of it that is likely animated
1. 콘솔에서 본체 설정을 열어 주세요
1. `데이터 관리` -> `DSiWare` 메뉴를 열어 주세요
-1. Select your DSiWare title
+1. DSiWare 타이틀을 선택해 주세요
1. "복사"를 선택한 후, "OK"를 선택해 주세요
1. 콘솔을 종료해 주세요
1. SD 카드를 컴퓨터에 삽입해 주세요
@@ -19,8 +19,8 @@ On this page, you will dump an installed DSiWare title from the eShop to your SD
+ ``은 Seedminer에서 복사한 32글자 폴더명 입니다
+ ``은 `` 안에 있는 32글자 폴더명입니다
+ 여러 개의 `` 폴더가 보인다면, [이 안내](troubleshooting#bannerbomb3)를 따라주세요
-1. Copy the `.bin` file inside of the `Nintendo DSiWare` folder to the root of your SD card
- + You will need this file later
+1. `Nintendo DSiWare` 폴더 안에 있는 `.bin` 파일을 SD 카드의 루트에 복사해 주세요
+ + 이 파일이 나중에 필요합니다
-Continue to [Installing boot9strap (Fredtool-Inject)](installing-boot9strap-(fredtool-inject))
+[boot9strap 설치 (Fredtool-Inject)](installing-boot9strap-(fredtool-inject)) 로 계속합니다
{: .notice--primary}
diff --git a/_pages/ko_KR/faq.txt b/_pages/ko_KR/faq.txt
index 5c020c0750..250cad0237 100644
--- a/_pages/ko_KR/faq.txt
+++ b/_pages/ko_KR/faq.txt
@@ -16,7 +16,7 @@ e숍이 해지되었어도 **커스텀 펌웨어를 설치할 수 있습니다.*
{% capture compat %}
제 콘솔은 최신 버전입니다, 외부 하드웨어나 전제 조건 없이 내 콘솔을 해킹할 수 있습니까?
-본체 모델에 따라 다릅니다. At the moment, New 3DS / New 3DS XL / New 2DS XL is able to be modded on 11.17.0 without any prerequisites (e.g. eShop titles, physical items), while 3DS / 3DS XL / 2DS is not.
+본체 모델에 따라 다릅니다. 현재 New 3DS, New 3DS XL, New 2DS XL은 11.17.0 버전에서 별도의 준비물(e숍 타이틀, 물리적인 장비) 없이 [수정이 가능합니다](homebrew-launcher-(super-skaterhax)). 하지만 3DS, 3DS XL, 2DS의 경우 [추가적인 소프트웨어 혹은 장비](alternate-exploits)가 필요합니다.
{% endcapture %}
{{ compat | markdownify }}
@@ -24,7 +24,7 @@ e숍이 해지되었어도 **커스텀 펌웨어를 설치할 수 있습니다.*
{% capture compat %}
이 가이드를 어느 콘솔에 사용할 수 있나요?
-이 가이드는 3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL과 호환됩니다. 만약 시스템 버전이 "0.0.0-0"으로 표시된다면, 개발자 콘솔를 가지고 있는 것일 수 있습니다.
+이 가이드는 실제로 판매된 모든 3DS 시리즈 기기(3DS, 3DS XL, 2DS, New 3DS, New 3DS XL, New 2DS XL)에 대응하고 있습니다. 만약 시스템 버전이 "0.0.0-0"으로 표시된다면, 개발자 콘솔를 가지고 있는 것일 수 있습니다.
{% endcapture %}
{{ compat | markdownify }}
@@ -45,7 +45,7 @@ e숍이 해지되었어도 **커스텀 펌웨어를 설치할 수 있습니다.*
{% capture compat %}
이걸로 다른 지역에서 발매된 게임을 즐길 수 있나요?
-네, Luma3DS는 자동으로 카트리지와 설치된 타이틀의 지역제한을 무시합니다. 일부 타 지역 게임들은 Luma3DS의 [로캘 에뮬레이션 기능](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)를 사용해야만 작동할 수도 있습니다.
+네, Luma3DS는 자동으로 카트리지와 설치된 타이틀의 지역제한을 무시합니다. 일부 타 지역 게임들은 Luma3DS의 [로캘 에뮬레이션 기능](https://wiki.hacks.guide/wiki/3DS:Setting_game_locales)을 사용해야만 작동할 수도 있습니다.
{% endcapture %}
{{ compat | markdownify }}
@@ -66,7 +66,9 @@ NNID는 닌텐도 네트워크 ID의 약칭이며, 본 가이드에서 NNID 걱
{% capture compat %}
커펌으로 제 3DS가 밴될 수 있나요?
-2017년에 커펌 유저들이 온라인 플레이 기능으로부터 차단당하는 일이 있었습니다 (e숍 사용, NNID, Nintendo 계정은 제외). 이는 랜덤으로 일어나는 듯 합니다. 그만한 대규모 차단은 그 후로 일어나진 않았습니다. 하지만 미래에 닌텐도가 어떻게 대응할 지는 저희도 모릅니다. 현재로서는 차단 같은 것들은 걱정할 필요가 없는것 같습니다.
+2017년에 커펌 유저들이 온라인 플레이 기능으로부터 차단당하는 일이 있었습니다 (e숍 사용, NNID, Nintendo 계정은 제외). 이는 랜덤으로 일어나는 듯 합니다. 그만한 대규모 차단은 그 후로 일어나진 않았습니다. 하지만 미래에 닌텐도가 어떻게 대응할 지는 저희도 모릅니다.
+
+현재로서는 차단 같은 것들은 걱정할 필요가 없는것 같습니다.
{% endcapture %}
{{ compat | markdownify }}
@@ -87,7 +89,9 @@ NNID는 닌텐도 네트워크 ID의 약칭이며, 본 가이드에서 NNID 걱
{% capture compat %}
Gateway나 Sky3DS, ntrboot, R4와 같은 뭔가를 돈주고 사야한다고 들었는데, 그 중에서 필요한 게 있나요?
-아니오. 최신 버전 펌웨어에서는 어떤 외부 기기도 없이 커스텀 펌웨어를 설치할 수 있습니다. 오히려 Gateway와 Sky3DS같은 3DS용 플래시카트들은 불필요하고, 벽돌을 유발할 수 있습니다.
+현재 버전 11.17.0에 있는 3DS, 3DS XL, 2DS 콘솔은 여러 [다른 취약점](alternate-exploits)을 사용해야 커스텀 펌웨어를 설치할 수 있습니다. 필요한 추가 사항이 없다면, ntrboot 방식이 가장 저렴할 것입니다 (약 20 미국 달러).
+
+Gateway와 Sky3DS같은 3DS용 플래시카트들은 불필요하고 벽돌을 유발할 수 있어 권장되지 않습니다.
{% endcapture %}
{{ compat | markdownify }}
@@ -147,7 +151,7 @@ FAT32로 포맷된 새 SD 카드에 기존 SD 카드의 파일들을 복사하
닌텐도 e숍이 해지 되었어도 계속해서 게임 업데이트를 받을 수 있습니다.
-게임의 지역이 콘솔과 맞지 않는다면, 해당 업데이트가 있는 다른 콘솔에서 [업데이트를 덤프](dumping-titles-and-game-cartridges)해야 합니다. 닌텐도 e숍은 해당 콘솔의 국가코드에 맞는 업데이트만 제공합니다 (일본 3DS는 일본 게임의 업데이트만 있습니다).
+게임의 지역이 콘솔과 맞지 않는다면, 해당 업데이트가 있는 다른 콘솔에서 [업데이트를 덤프](dumping-titles-and-game-cartridges)해야 합니다. 닌텐도 e숍은 해당 콘솔의 국가코드에 맞는 업데이트만 제공합니다 (예를 들어, 일본 3DS는 일본 게임의 업데이트만 있습니다).
{% endcapture %}
{{ compat | markdownify }}
diff --git a/_pages/ko_KR/finalizing-setup.txt b/_pages/ko_KR/finalizing-setup.txt
index a2d59142d7..1c29367ce4 100644
--- a/_pages/ko_KR/finalizing-setup.txt
+++ b/_pages/ko_KR/finalizing-setup.txt
@@ -8,17 +8,24 @@ title: "마무리 단계"
`boot.firm` 파일은 boot9strap이 NAND에서 로딩을 완료한 후 실행하는 것입니다. 이번 경우에서는, [LumaTeam](https://github.com/LumaTeam/)의 Luma3DS를 사용해서 콘솔을 패치하고, 홈브류 소프트웨어를 실행할 수 있도록 합니다.
-이 가이드에서는, 중요한 시스템 파일의 백업을 하고, 다음의 홈브류 프로그램을 설치할 겁니다:
+On this page, we will make critical system file backups and install some homebrew programs. Most of these steps will be automated using a script that you will run on your console.
-+ **FBI** *(CIA 형식의 애플리케이션 설치)*
-+ **Anemone3DS** *(사용자 지정 테마 설정)*
-+ **Checkpoint** *(3DS와 DS게임의 세이브 파일 백업 및 복구)*
-+ **Universal-Updater** *(Wi-Fi를 통해 3DS에 홈브류를 다운로드 하는 앱 스토어)*
-+ **GodMode9** *(NAND와 게임 카드의 기능을 수행할 수 있는 다목적 툴)*
-+ **Homebrew Launcher Loader** *(홈브류 런처 실행)*
+{% capture compat %}
+List of homebrew applications that will be installed
-이 페이지에서 위 앱들 중의 대부분을 사용하기 때문에, 다운로드를 스킵하는 것은 권장하지 않습니다. 이 페이지의 끝에서, 불필요한 설치 파일들을 지움으로써 당신의 SD 카드를 정리할 것입니다.
-{: .notice--warning}
+Click the links to view the GitHub repository of each application. (Give them a star if you appreciate them!)
+
++ **[FBI](https://github.com/Steveice10/FBI)** *(installs CIA formatted applications)*
++ **[Homebrew Launcher Loader](https://github.com/PabloMK7/homebrew_launcher_dummy)** *(launches the Homebrew Launcher)*
++ **[Anemone3DS](https://github.com/astronautlevel2/Anemone3DS)** *(installs custom themes)*
++ **[Checkpoint](https://github.com/FlagBrew/Checkpoint)** *(backs up and restores save files for 3DS and DS games)*
++ **[ftpd](https://github.com/mtheall/ftpd)** *(access your 3DS SD card wirelessly)*
++ **[Universal-Updater](https://github.com/Universal-Team/Universal-Updater/)** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)*
++ **[GodMode9](https://github.com/d0k3/GodMode9)** *(multipurpose tool which can do NAND and cartridge functions)*
+
+{% endcapture %}
+{{ compat | markdownify }}
+{: .notice--info}
### 호환성 안내
@@ -30,12 +37,7 @@ title: "마무리 단계"
### 준비물
-* 최신 버전의 [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (`.cia` 파일)
-* v3.7.4의 [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (`.cia` 파일)
-* 최신 버전의 [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (`.cia` 파일)
-* 최신 버전의 [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (`.cia` 파일)
-* 최신 버전의 [FBI](https://github.com/Steveice10/FBI/releases/latest) (`.cia` 와 `.3dsx`의 **양** 파일들)
-* 최신 버전의 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (`.zip` 파일)
+* [finalizing.zip]({{ base_path }}/assets/finalizing.zip) (direct download)
### 진행 방법
@@ -45,26 +47,14 @@ title: "마무리 단계"
1. 콘솔을 종료해 주세요
1. SD 카드를 컴퓨터에 삽입해 주세요
-1. SD 카드의 루트에 `cias` 폴더가 없을 경우 폴더를 만들어 주세요
-1. 모든 CIA 파일들 (`Anemone3DS.cia`, `Checkpoint.cia`, `FBI`, `Homebrew_Launcher.cia`, `Universal-Updater.cia`) 를 SD 카드의 `/cias/` 폴더로 복사해 주세요
-1. SD 카드의 루트에 `3ds` 폴더가 없을 경우 폴더를 만들어 주세요
- + 이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 `Nintendo 3DS` 폴더와 다른 폴더입니다
-1. `FBI.3dsx` 파일을 SD 카드의 `/3ds/` 폴더에 복사해 주세요
-1. SD 카드 내 `luma` 폴더에 `payloads` 폴더가 없을 경우 폴더를 만들어 주세요
-1. SD 카드의 `/luma/payloads/`폴더에 GodMode9 `.zip`안에 압축되있는 `GodMode9.firm`을 복사해 주세요
-1. SD 카드의 루트로 GodMode9 `.zip`안에 압축이 되있는 `gm9` 폴더를 복사해 주세요
-1. SD 카드를 콘솔에 다시 삽입해 주세요
-1. 콘솔을 시작해 주세요
+1. Copy the contents of `finalizing.zip` to the root of your SD card, merging/replacing any existing folders if prompted
+1. Insert your SD card into your console
-이 스크린샷들은 이 가이드를 따랐을 때의 최소한의 SD 카드 레이아웃을 표시합니다. 이전에 따른 방법에 따라, SD 카드에 추가 파일과 폴더가 있을 수 있습니다.
+The screenshot below indicates the minimum SD card layout that is required to follow this page. 이전에 따른 방법에 따라, SD 카드에 추가 파일과 폴더가 있을 수 있습니다.
![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
{: .notice--info}
-![]({{ "/images/screenshots/godmode9-location.png" | absolute_url }})
-{: .notice--info}
-
-
#### 섹션 II - CFW 확인
여기서 기기의 안전을 위해 커스텀 펌웨어가 설치되어 있는지 확인합니다. If custom firmware is not installed by this point for any reason, the next section may render your console unable to be hacked without external hardware.
@@ -76,7 +66,7 @@ title: "마무리 단계"
1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요
1. 콘솔을 종료해 주세요
-If you do NOT boot into the Luma3DS configuration menu, custom firmware was not installed on your console. [Nintendo Homebrew Discord 서버](https://discord.gg.MWxPgEp)에 오셔서 도움을 요청하세요.
+Luma3DS 구성 메뉴로 부팅되지 않았다면 콘솔에 커스텀 펌웨어가 설치되지 않았습니다. [Nintendo Homebrew Discord 서버](https://discord.gg.MWxPgEp)에 오셔서 도움을 요청하세요.
{: .notice--danger}
@@ -86,17 +76,12 @@ If you do NOT boot into the Luma3DS configuration menu, custom firmware was not
{% include_relative include/sysupdate.txt cfw="true" %}
-#### 섹션 IV - Homebrew Launcher
-
-이 섹션에서는 FBI를 실행하기 위해 다운로드 플레이를 잠시 Homebrew Launcher로 치환합니다. 다운로드 플레이 앱은 콘솔을 다시 시작하면 원상태로 돌아옵니다.
-
-{% include_relative include/launch-hbl-dlp.txt %}
-
-#### 섹션 V - RTC 및 DSP 설정
+#### Section IV - RTC and DSP setup
이 섹션에서는 3DS 내부 시계를 실제 시각과 맞추고, 홈브류 소프트웨어에서 음성을 적절하게 이용하기 위해 사운드 펌웨어를 백업합니다.
1. (L 어깨) + (십자 Down) + (Select) 을 동시에 눌러서 Rosalina 메뉴를 실행해 주세요
+ + If one of these buttons is broken, download [config.ini]({{ base_path }}/assets/config.ini) and put it in your `luma` folder, replacing the existing one. This will change the Rosalina menu key combination to (X) + (Y)
1. "Miscellaneous options"을 선택해 주세요
1. "Dump DSP firmware"를 선택해 주세요
1. (B)를 눌러 진행해 주세요
@@ -105,19 +90,9 @@ If you do NOT boot into the Luma3DS configuration menu, custom firmware was not
1. (B)를 눌러 Rosalina 메뉴로 돌아가 주세요
1. (B)를 눌러 Rosalina 메뉴를 나와 주세요
-#### 섹션 VI - CIA 설치
+#### Section V - Setup Script
-이 섹션에서는, 홈 메뉴에 몇몇 유용한 홈브류 앱을 설치하게 됩니다.
-
-1. 홈브류 목록에서 FBI를 실행해 주세요
-1. `SD` -> `cias`로 이동해 주세요
-1. "\"를 선택해 주세요
-1. "Install and delete all CIAs" 를 선택한 뒤 (A)를 눌러 주세요
-1. (Home) 키를 누르고, 다운로드 플레이를 종료해 주세요
-
-#### 섹션 VII - CTRNAND Luma3DS
-
-이 섹션에서는, Luma3DS의 핵심 파일을 내부 저장소에 복사하는 스크립트를 실행합니다. 이렇게 하면 SD 카드 없이도 커펌을 이용할 수 있습니다.
+In this section, you will use a script to automate homebrew installation, SD card cleanup, and system file backup.
1. 콘솔을 종료해 주세요
1. (Start) 를 길게 누르고, 이 상태에서 콘솔의 전원을 켜 주세요. GodMode9이 실행될 겁니다
@@ -126,51 +101,17 @@ If you do NOT boot into the Luma3DS configuration menu, custom firmware was not
1. 만약 "RTC date&time seems to be wrong" 메세지가 표시되면 (A) 버튼을 눌러 하고, 날짜와 시간을 고친 다음 (A) 버튼을 눌러 계속해 주세요
1. (Home)을 눌러 작업 메뉴를 열어 주세요
1. "Scripts..."를 선택해 주세요
-1. "GM9Megascript"를 선택해 주세요
-1. "Scripts from Plailect's Guide"를 선택해 주세요
-1. "Setup Luma3DS to CTRNAND"를 선택해 주세요
-1. 프롬프트가 뜨면, (A) 를 눌러서 진행해 주세요
-1. (A)를 눌려 SysNAND (lvl1) 쓰기 잠금을 풀고 주어진 키 조합을 입력해 주세요
-1. (A)를 눌러 진행해 주세요
-
-#### 섹션 VIII - SD 카드 정리하기
-
-이 섹션에서는, SD 카드에서 불필요한 파일을 삭제하는 스크립트를 실행합니다.
-
-1. "Cleanup SD Card"를 선택해 주세요
-1. 프롬프트가 뜨면, (A) 를 눌러서 진행해 주세요
-1. (A)를 눌러 진행해 주세요
-1. (B)를 눌러 메인 메뉴로 돌아가 주세요
-
-#### 섹션 IX - 중요 파일 백업
-
-이 섹션에서는 벽돌 현상이나 복구를 위해 사용할 수 있는 시스템 백업 파일을 생성합니다.
-
-1. "Backup Options"를 선택해 주세요
-1. "SysNAND Backup"을 선택해 주세요
-1. (A)를 눌러 확인해 주세요
- + 이 과정은 시간이 좀 걸릴 것입니다
- + 만약 에러가 발생하면, [문제 해결 가이드](troubleshooting#finalizing-setup)를 참고해 주세요
-1. (A)를 눌러 진행해 주세요
-1. (B)를 눌러 메인 메뉴로 돌아가 주세요
-1. "Exit"를 선택해 주세요
-1. 메세지가 표시되면, (A)를 눌러서 쓰기잠금을 확인해 주세요
-1. `[S:] SYSNAND VIRTUAL` 폴더로 이동해 주세요
-1. `essential.exefs`에서 (A)를 눌러 선택해 주세요
-1. "Copy to 0:/gm9/out"를 선택해 주세요
- + "Destination already exists"라는 메세지가 표시되면, "Overwrite file(s)"에 (A)를 눌러 주세요
-1. (A)를 눌러 진행해 주세요
-1. (Home)을 눌러 작업 메뉴를 열어 주세요
-1. "Poweroff system"을 선택해 콘솔의 전원을 꺼 주세요
+1. Select "finalize"
+1. Follow the prompts in the script, answering each question that you are asked
+ + If you encounter an error, follow the instructions in the error message or consult the [troubleshooting](troubleshooting#finalizing-setup) page
+1. Once the script says "Setup complete!", press (A) to power off the device
+ + If you do NOT see the message "Setup complete!", the script was not successful and you will need to redo this section
1. SD 카드를 컴퓨터에 삽입해 주세요
-1. SD 카드의 `/gm9/out/` 폴더의 `<날짜>_<일련번호>_sysnand_##.bin`, `<날짜>_<일련번호>_sysnand_##.bin.sha`, `essential.exefs`을 컴퓨터의 안전한 위치에 복사해 주세요
- + 이 백업들을 여러 장소에 복사해 주세요 (온라인 파일 저장소, 하드 드라이브 등)
- + 이 백업들은 콘솔을 벽돌로부터 지켜줄 것이고 만약 나중에 문제가 생겼을 때 NAND 이미지로부터 파일을 복구하는 것을 도울 것입니다
-1. SD 카드에 있는 `/gm9/out/`의 `<날짜>_<일련번호>_sysnand_##.bin` 과`<날짜>_<일련번호>_sysnand_##.bin.sha' 파일을 복사 후에 지워 주세요
- + 나머지 파일들은 크기가 작으며, 편의성을 위해 SD 카드에 남겨 두셔도 됩니다
-1. 만약 존재한다면, SD 카드의 `/luma/backups/` 폴더를 컴퓨터의 안전한 위치에 복사해 주세요
-1. SD 카드를 콘솔에 다시 삽입해 주세요
-1. 콘솔을 시작해 주세요
+1. Copy the `/gm9/out/` folder to a safe location on your computer
+ + This folder contains critical file backups and should be backed up to multiple locations (i.e. cloud storage) if possible
+ + The two SysNAND files are your NAND backup and can be used to revert your console to a working state if it is bricked by a software issue
+ + The `essential.exefs` file contains your console's system-unique files and can be used to recover your data in the event of a hardware failure
+1. Delete the contents of the `/gm9/out/` folder from your SD card
___
diff --git a/_pages/ko_KR/homebrew-launcher-(freakyhax).txt b/_pages/ko_KR/homebrew-launcher-(freakyhax).txt
index b53c99e8d6..a5188328b8 100644
--- a/_pages/ko_KR/homebrew-launcher-(freakyhax).txt
+++ b/_pages/ko_KR/homebrew-launcher-(freakyhax).txt
@@ -6,7 +6,7 @@ title: "Homebrew Launcher (freakyhax)"
{% capture technical_info %}
기술적 상세 정보 (선택 사항)
-[freakyhax](https://plutooo.github.io/freakyhax/) is an exploit for the game Freakyforms Deluxe discovered and released by [plutooo](https://github.com/plutooo). It works on versions 9.0.0 through 11.17.0 on EUR, USA and JPN region consoles.
+[freakyhax](https://plutooo.github.io/freakyhax/)는 [plutooo](https://github.com/plutooo)가 발견하고 작성한 Freakyforms Deluxe 게임의 취약점입니다. EUR, USA 및 JPN 지역 콘솔의 버전 9.0.0 - 11.17.0에서 작동합니다.
{% endcapture %}
{{ technical_info | markdownify }}
@@ -17,7 +17,7 @@ title: "Homebrew Launcher (freakyhax)"
### 준비물
-+ A EUR/USA/JPN copy of Freakyforms Deluxe (eShop or cartridge)
++ EUR/USA/JPN 버전의 Freakyforms Deluxe (e숍 또는 카트리지)
+ 최신 버전의 [freakyhax](https://github.com/plutooo/freakyhax/releases/latest)
* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (`.zip` 파일)
+ [otherapps.zip]({{ base_path }}/assets/otherapps.zip) (직접 다운로드)
@@ -28,7 +28,7 @@ title: "Homebrew Launcher (freakyhax)"
1. 콘솔을 종료해 주세요
1. SD 카드를 컴퓨터에 삽입해 주세요
-1. Copy all files and folders inside the `/build//exploit/` folder from the freakyhax `.zip` to the root of your SD card
+1. freakyhax `.zip`에서 `/build/<콘솔 지역과 버전>/exploit/` 폴더 안의 모든 파일과 폴더를 SD 카드의 루트로 복사해 주세요
+ SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 들어가 있지 않은 상태의 폴더입니다
1. 콘솔의 모델/지역/버전에 해당한 otherapp 페이로드를 `otherapps.zip`에서 SD 카드의 루트에 복사하고, 이 파일을 `otherapp.bin`으로 이름을 바꿔 주세요
+ `.bin` 확장자는 보이지 않는 이상 추가하지 말아 주세요
@@ -40,9 +40,9 @@ title: "Homebrew Launcher (freakyhax)"
1. SD 카드를 콘솔에 다시 삽입해 주세요
1. 콘솔을 시작해 주세요
-1. Launch Freakyforms Deluxe
-1. In the game menu, select `Play -> Camera -> Load a QR code`
-1. Select the QR code
+1. Freakyforms Deluxe를 실행해 주세요
+1. 게임 메뉴에서 `Play -> Camera -> Load a QR code`를 선택해 주세요
+1. QR 코드를 선택해 주세요
1. 익스플로잇이 성공적이었다면 Homebrew Launcher로 부팅되었을 것입니다
1. 콘솔을 종료해 주세요
diff --git a/_pages/ko_KR/homebrew-launcher-(ninjhax2-dx).txt b/_pages/ko_KR/homebrew-launcher-(ninjhax2-dx).txt
index 18ce76afcb..54a4379cd0 100644
--- a/_pages/ko_KR/homebrew-launcher-(ninjhax2-dx).txt
+++ b/_pages/ko_KR/homebrew-launcher-(ninjhax2-dx).txt
@@ -6,7 +6,7 @@ title: "Homebrew Launcher (ninjhax2-dx)"
{% capture technical_info %}
기술적 상세 정보 (선택 사항)
-[Ninjhax2](https://github.com/smealum/ninjhax2.x) is an exploit for the game "Cubic Ninja" made by [smealum](https://github.com/smealum). This page uses an updated version of ninjhax by [zoogie](https://github.com/zoogie) called [ninjhax2-dx](https://github.com/zoogie/ninjhax2-dx), which supports 11.17.0.
+[Ninjhax2](https://github.com/smealum/ninjhax2.x)는 [smealum](https://github.com/smealum)이 작성한 "Cubic Ninja" 게임의 취약점입니다. 이 페이지는 11.17.0을 지원하는 [ninjhax2-dx](https://github.com/zoogie/ninjhax2-dx)라는 [zoogie](https://github.com/zoogie)의 ninjhax 업데이트 버전을 사용합니다.
{% endcapture %}
{{ technical_info | markdownify }}
{: .notice--info}
@@ -14,12 +14,12 @@ title: "Homebrew Launcher (ninjhax2-dx)"
이 방법은 3DS의 카메라가 작동해야 가능합니다.
{: .notice--info}
-This process will overwrite your Cubic Ninja save file, if you have one.
+이 과정은 Cubic Ninja 저장 파일이 있는 경우 덮어쓸 것 입니다.
{: .notice--warning}
### 준비물
-* The game "Cubic Ninja"
-* The latest release of [ninjhax2-dx](https://github.com/zoogie/ninjhax2-dx/releases)
+* "Cubic Ninja" 게임
+* 최신 버젼의 [ninjhax2-dx](https://github.com/zoogie/ninjhax2-dx/releases)
* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (`.zip` 파일)
### 진행 방법
@@ -35,7 +35,7 @@ This process will overwrite your Cubic Ninja save file, if you have one.
#### 섹션 II - ninjhax2-dx
1. SD 카드를 콘솔에 다시 삽입해 주세요
1. 콘솔을 시작해 주세요
-1. Launch "Cubic Ninja" once and select "Create"
+1. "Cubic Ninja"를 한 번 실행하고 "Create"를 선택해 주세요
+ If prompted, delete all data
1. Select "QR Code"
1. Select "Scan QR Code"
diff --git a/_pages/ko_KR/homebrew-launcher-(smilehax-iie).txt b/_pages/ko_KR/homebrew-launcher-(smilehax-iie).txt
index 4fdcc83a9f..df92560b39 100644
--- a/_pages/ko_KR/homebrew-launcher-(smilehax-iie).txt
+++ b/_pages/ko_KR/homebrew-launcher-(smilehax-iie).txt
@@ -18,7 +18,7 @@ title: "Homebrew Launcher (smilehax-IIe)"
+ 콘솔에 설치된 게임 "SmileBASIC"
+ 이 게임을 다운로드 한 적이 있다면, [다시 다운로드](https://en-americas-support.nintendo.com/app/answers/detail/a_id/607/~/how-to-download-or-redownload-content-in-nintendo-3ds-eshop) 할 수 있습니다
+ SmileBASIC을 설치하려면 SD 카드가 들어가 있어야 합니다
-+ 최신 버전의 [smilehax-IIe](https://github.com/zoogie/smilehax-IIe/releases/download/v1.0/Release_sh2e_v1.1.zip) (직접 다운로드)
++ The latest release of [smilehax-IIe](https://github.com/zoogie/smilehax-IIe/releases/download/v1.1/Release_sh2e_v1.1.zip) (direct download)
+ 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (`.zip` 파일)
+ [otherapps.zip]({{ base_path }}/assets/otherapps.zip) (직접 다운로드)
@@ -39,8 +39,8 @@ title: "Homebrew Launcher (smilehax-IIe)"
#### 섹션 II - smilehax
1. SmileBASIC을 실행해 주세요
- + Update the game if prompted
-1. Select the "Publish/Download Projects" option
+ + 메세지가 표시되면 게임을 업데이트해 주세요
+1. "Publish/Download Projects" 를 선택해 주세요
1. Select the "Download (Receive) using Public Key" option
1. "Yes" 버튼을 눌러 주세요
1. Enter the Public Key "NJEQK3A4" using the on-screen keyboard
diff --git a/_pages/ko_KR/include/3ds-11.17.txt b/_pages/ko_KR/include/3ds-11.17.txt
index 39ea85d3f5..5c8c6fa125 100644
--- a/_pages/ko_KR/include/3ds-11.17.txt
+++ b/_pages/ko_KR/include/3ds-11.17.txt
@@ -2,5 +2,5 @@
- 만약 콘솔이 *Luma 10.2.1 이상일 경우*, 업데이트해도 *100%* 안전합니다. 콘솔을 부팅할 때 (Select) 버튼을 누르고 있으면 Luma의 버전을 확인할 수 있습니다.
- 만약 콘솔이 오래된 Luma를 사용하고 있다면, 콘솔을 11.17.0으로 업데이트하기 전에 [CFW 복구 / 업데이트](restoring-updating-cfw)를 해야 합니다.
-- If your console does not yet have custom firmware, **do NOT update to the latest version** unless this guide instructs you to.
-- If your unmodified console is ALREADY on 11.17.0, this guide has been updated accordingly. Specifically, New3DS-family consoles have a [free software method](homebrew-launcher-(super-skaterhax)), while Old3DS-family consoles will need to use [alternate exploits](alternate-exploits) that rely on external hardware or software.
+- 만약 콘솔에 아직 커스텀 펌웨어가 설치되어 있지 않다면, 이 가이드에서 지시 하지 않는 한 **최신 버전으로 업데이트 하지 마세요.**
+- 만약 커스텀 펌웨어가 되지 않은 콘솔이 이미 11.17.0 이라면, 이 가이드는 그것에 맞춰 업데이트 되어있습니다. Specifically, New3DS-family consoles have a [free software method](homebrew-launcher-(super-skaterhax)), while Old3DS-family consoles will need to use [alternate exploits](alternate-exploits) that rely on external hardware or software.
diff --git a/_pages/ko_KR/include/addproxy.txt b/_pages/ko_KR/include/addproxy.txt
index 898f95a835..f5c6bed24f 100644
--- a/_pages/ko_KR/include/addproxy.txt
+++ b/_pages/ko_KR/include/addproxy.txt
@@ -1,6 +1,9 @@
아직 안하셨다면, 콘솔을 인터넷에 연결해 주세요.
{: .notice--info}
+A visual guide is available for this section [here](/images/screenshots/set-proxy.png).
+{: .notice--success}
+
1. 본체 설정 에플리케이션을 실행해 주세요
1. `인터넷 설정` -> `인터넷 접속 설정`으로 이동해 주세요
1. 네트워크 접속 경로을 클릭해, `설정 변경` -> `다음 페이지 (오른쪽 화살표)` -> `Proxy 설정`으로 이동해 주세요
diff --git a/_pages/ko_KR/include/ctrnand-datayeet.txt b/_pages/ko_KR/include/ctrnand-datayeet.txt
index b55cabe375..8440ddbd58 100644
--- a/_pages/ko_KR/include/ctrnand-datayeet.txt
+++ b/_pages/ko_KR/include/ctrnand-datayeet.txt
@@ -1,4 +1,4 @@
-이 섹션에서는 시스템 설정을 기본값으로 복구하게 됩니다. 설치된 게임과 세이브 데이터에는 영향을 주지 않습니다. 이 절차는 일부 콘솔에서 보고된 확장 메모리 모드와 몇몇 앱의 문제점을 예방하기 위해 필요합니다.
+This section will reset your system settings to its defaults. **Installed games and their save data will not be affected.** This is **required** to prevent known issues relating to extended memory mode and applets on some consoles.
1. 콘솔을 종료해 주세요
1. (Start) 를 길게 누르고, 이 상태에서 콘솔의 전원을 켜 주세요. GodMode9이 실행될 겁니다
diff --git a/_pages/ko_KR/include/remove-usm-slottool.txt b/_pages/ko_KR/include/remove-usm-slottool.txt
index c0a607ef96..4aecd6c4d1 100644
--- a/_pages/ko_KR/include/remove-usm-slottool.txt
+++ b/_pages/ko_KR/include/remove-usm-slottool.txt
@@ -1,6 +1,6 @@
이 섹션에서는, (커스텀 펌웨어를 이용해) Homebrew Launcher를 다시 한 번 실행해 섹션 I에서 덮어씌웠던 Wi-Fi 커넥션 슬롯을 원래대로 복구합니다.
-1. 다운로드 플레이 앱을 실행해 주세요
+1. 다운로드 플레이 앱을 실행해 주세요 (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
1. 두 가지의 버튼이 화면에 뜰 때까지 기다려 주세요
+ 이 버튼들을 누르지 마세요
1. (L 어깨) + (십자 Down) + (Select) 을 동시에 눌러서 Rosalina 메뉴를 실행해 주세요
diff --git a/_pages/ko_KR/installing-boot9strap-(frogtool).txt b/_pages/ko_KR/installing-boot9strap-(frogtool).txt
index 7cf29fe5d2..387dae4ed8 100644
--- a/_pages/ko_KR/installing-boot9strap-(frogtool).txt
+++ b/_pages/ko_KR/installing-boot9strap-(frogtool).txt
@@ -6,7 +6,7 @@ title: "boot9strap 설치 (Frogtool)"
{% capture technical_info %}
기술적 상세 정보 (선택 사항)
-For technical details on the exploits that you will be using on this page, see "DSiWare_Exports CTCert verification" and "FIRM partitions known-plaintext" [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).
+이 페이지에서 사용하게 될 취약점에 대한 기술적 세부 정보는 [여기 (영어)](https://www.3dbrew.org/wiki/3DS_System_Flaws)에 "DSiWare_Exports CTCert verification" 및 "FIRM partitions known-plaintext" 관련 글을 참조하세요.
{% endcapture %}
{{ technical_info | markdownify }}
@@ -14,14 +14,13 @@ For technical details on the exploits that you will be using on this page, see "
이 페이지의 `frogcert.bin` [마그넷](https://wikipedia.org/wiki/Magnet_URI_scheme)링크를 사용하려면
- [qBittorrent](https://www.qbittorrent.org/download.php) 또는 [Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다. \
-If you are unable to install one, follow [BannerBomb3](bannerbomb3) instead.
+ [qBittorrent](https://www.qbittorrent.org/download.php) 또는 [Deluge](http://dev.deluge-torrent.org/wiki/Download)와 같은 토렌트 클라이언트가 필요합니다.
{: .notice--warning}
### 준비물
* Your `movable.sed` file from completing Seedminer or nimhax on the root of your SD card
-* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
+* [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) (magnet link)
* 최신 버전의 [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
* 최신 버전의 [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
@@ -40,14 +39,14 @@ If you are unable to install one, follow [BannerBomb3](bannerbomb3) instead.
1. SD 카드를 콘솔에 다시 삽입해 주세요
1. 콘솔을 시작해 주세요
-#### Section III - Patching DS Download Play
+#### 섹션 III - DS 다운로드 플레이 패치
1. 아무 방법을 사용해 Homebrew Launcher를 실행해 주세요 (아마 인터넷 브라우저일 겁니다)
1. 홈브류 목록에서 Frogtool를 실행해 주세요
-1. Select the "INJECT patched DS Download Play" option
-1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
+1. "INJECT patched DS Download Play" 옵션을 선택해 주세요
+1. Frogtool이 자동으로 Flipnote Studio의 JPN 버전을 DS 다운로드 플레이에 삽입할 것입니다
1. 작업이 완료되면, 위 화면을 읽고 문제가 없는지 확인해 주세요
-1. Tap the touch screen, then select "BOOT patched DS Download Play"
+1. 터치 스크린을 탭하고, "BOOT patched DS Download Play" 을 선택해 주세요
1. 만약 익스플로잇이 성공적이었다면, 콘솔은 JPN 버전의 Flipnote Studio를 실행할 겁니다
+ If you get stuck on a black screen, follow [this](https://wiki.hacks.guide/wiki/3DS:TWLFix#Homebrew_Launcher-0) page, then try again
@@ -77,10 +76,10 @@ If you are unable to install one, follow [BannerBomb3](bannerbomb3) instead.
1. 다운로드 플레이 앱을 다시 실행해 주세요
1. 성공하면 Homebrew Launcher가 실행될 것입니다
1. 홈브류 목록에서 Frogtool를 실행해 주세요
-1. Select the "RESTORE clean DS Download Play" option
+1. "RESTORE clean DS Download Play"을 선택해 주세요
1. 작업이 완료되면, 위 화면을 읽고 문제가 없는지 확인해 주세요
+ If there are any errors or missing files, correct the problem and try again
-1. If the process was successful, tap the touch screen, then press START to exit
+1. 작업을 성공적으로 마치면 화연을 탭한 후 스타트 버튼(START) 를 눌러서 나가 주세요
1. 콘솔을 종료해 주세요
___
diff --git a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
index f69fc5d6d2..20dcee1952 100644
--- a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
@@ -27,6 +27,7 @@ kartdlphax와 unSAFE_MODE의 더 자세한 설명은 다음 (영어) 페이지
- 커스텀 펌웨어를 설치하려고 하는 3DS (**타겟 3DS**)와 지역이 같은, 커스텀 펌웨어가 설치된 제2의 3DS (**소스 3DS**)
- 양 콘솔들은 USA, JPN, or EUR 지역 기기들이어야 합니다.
+ - The source 3DS can be [region changed](region-changing) to match the target 3DS if necessary
- 두 3DS와 지역이 같은, 마리오 카트 7의 물리적/디지털 버전
- 두 콘솔을 위한 SD 카드
diff --git a/_pages/ko_KR/installing-boot9strap-(menuhax).txt b/_pages/ko_KR/installing-boot9strap-(menuhax).txt
new file mode 100644
index 0000000000..8a2c9bc0a2
--- /dev/null
+++ b/_pages/ko_KR/installing-boot9strap-(menuhax).txt
@@ -0,0 +1,89 @@
+---
+title: "Installing boot9strap (menuhax)"
+---
+
+{% include toc title="목차" %}
+
+{% capture technical_info %}
+기술적 상세 정보 (선택 사항)
+
+We use BannerBomb3 to install menuhax67, which lets us access the Homebrew Launcher. From there, we launch uloader which launches SafeB9SInstaller.
+
+See [here](https://github.com/zoogie/uloader) for information about uloader and [here](https://github.com/zoogie/menuhax67) for information about menuhax67.
+
+{% endcapture %}
+{{ technical_info | markdownify }}
+{: .notice--info}
+
+여기까지 왔다면, 시스템 펌웨어 버전이 11.15.0 또는 11.14.0일 것 입니다. If you are on any firmware above 11.15.0, uloader will fail.
+{: .notice--warning}
+
+### 준비물
+
+* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (직접 다운로드)
+* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (직접 다운로드)
+* The latest release of [BannerBomb3](https://github.com/zoogie/Bannerbomb3/releases/download/v3.0/Release_v3.0.zip) (direct download)
+* The latest release of [uloader](https://github.com/zoogie/uloader/releases/download/1.0/uloader.3dsx) (direct download)
+* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (`.zip` 파일)
+
+#### 섹션 I - 준비 작업
+
+1. 콘솔을 종료해 주세요
+1. SD 카드를 컴퓨터에 삽입해 주세요
+1. Luma3DS `.zip`안에 있는 `boot.firm`과 `boot.3dsx`를 SD 카드의 루트에 복사해 주세요
+1. SD 카드이 루트에 `boot9strap` 라는 이름으로 새 폴더를 생성해 주세요
+1. SD 카드에 있는 `/boot9strap/` 폴더에 boot9strap `.zip` 파일 안에 압축되있는 `boot9strap.firm`과 `boot9strap.firm.sha`을 복사해 주세요
+1. SafeB9SInstaller `.zip`의 `SafeB9SInstaller.bin`을 SD 카드의 루트로 복사해 주세요
+1. Copy `bb3.bin` from the Release `.zip` to the root of your SD card, replacing the current file
+1. Copy `Launcher.dat` from the folder for your model and region inside the Release `.zip` to the root of your SD card
+1. SD 카드의 루트에 `3ds` 폴더가 없을 경우 폴더를 만들어 주세요
+ + 이 폴더에는 홈브류 에플리케이션과 데이터가 보관되어 있으며, 콘솔이 자동으로 생성하는 `Nintendo 3DS` 폴더와 다른 폴더입니다
+1. Copy `uloader.3dsx` to the `/3ds/` folder on your SD card
+1. SD 카드를 콘솔에 다시 삽입해 주세요
+
+#### 섹션 II - BannerBomb3
+
+In this section, you will trigger the BannerBomb3 exploit using the DSiWare Management menu and use it to install the menuhax67 exploit.
+
+1. 콘솔을 시작해 주세요
+1. 콘솔에서 본체 설정을 열어 주세요
+1. `데이터 관리` -> `DSiWare` -> `SD 카드`로 들어가주세요 ([사진](/images/screenshots/bb3/dsiware-management.png))
+ + 콘솔은 BB3 multihax 메뉴를 표시할 겁니다
+1. Use the D-Pad to navigate and press the (A) button to select "Install *hax"
+ + 콘솔이 자동으로 재부팅될 겁니다
+
+#### Section III - menuhax67
+
+In this section you will use the menuhax67 exploit installed earlier to launch uloader, which will load SafeB9SInstaller.
+
+1. Tap on the small HOME Menu settings icon in the top left of the bottom screen (![]({{ "/images/homemenuicon.png" | absolute_url }}){: height="32px" width="52px"})
+ + If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
+1. 익스플로잇이 성공적이었다면 Homebrew Launcher로 부팅되었을 것입니다
+1. Launch uloader from the list of homebrew
+1. 익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
+ + 콘솔이 멈추거나 다운되면, 강제로 전원을 끄고, 이 섹션을 다시 실행해 주세요
+
+#### 섹션 IV - boot9strap 설치
+
+{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
+{%- include_relative include/configure-luma3ds.txt %}
+
+{% include_relative include/luma3ds-installed-note.txt %}
+
+#### Section V - Removing menuhax67
+
+In this section, you will trigger the BannerBomb3 exploit a second time so that you can uninstall the menuhax67 exploit you installed in Section II. This will allow you to use the HOME Menu settings normally again.
+
+1. 콘솔에서 본체 설정을 열어 주세요
+1. `데이터 관리` -> `DSiWare` -> `SD 카드`로 들어가주세요 ([사진](/images/screenshots/bb3/dsiware-management.png))
+1. Use the D-Pad to navigate and press the (A) button to select "Uninstall *hax"
+ + 콘솔이 자동으로 재부팅될 겁니다
+1. 콘솔을 종료해 주세요
+1. SD 카드를 컴퓨터에 삽입해 주세요
+1. SD 카드의 `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` 폴더로 이동해 주세요
+1. `F00D43D5.bin` 파일을 Nintendo DSiWare 폴더와 PC에서 지워 주세요. 더 이상 이 파일은 필요가 없습니다
+
+___
+
+### [마무리 단계](finalizing-setup) 로 계속합니다
+{: .notice--primary}
diff --git a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
index 44211c0ecc..a8d674bc1d 100644
--- a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
@@ -56,12 +56,12 @@ title: "boot9strap 설치 (ntrboot)"
#### 섹션 IV - Luma3DS 설정
-1. SD 카드를 컴퓨터에 삽입해 주세요
+1. 콘솔의 SD 카드를 컴퓨터에 삽입해 주세요
1. `boot.firm` 파일을 SD 카드의 루트에서 삭제해 주세요
1. Luma3DS `.zip`안에 있는 `boot.firm`을 SD 카드의 루트에 복사해 주세요
1. SD 카드를 콘솔에 다시 삽입해 주세요
1. 콘솔을 시작해 주세요
-{%- include_relative include/configure-luma3ds.txt %}
+{% include_relative include/configure-luma3ds.txt %}
{% include_relative include/luma3ds-installed-note.txt %}
diff --git a/_pages/ko_KR/installing-boot9strap-(safecerthax).txt b/_pages/ko_KR/installing-boot9strap-(safecerthax).txt
index 92abfc43b9..22468fbbb4 100644
--- a/_pages/ko_KR/installing-boot9strap-(safecerthax).txt
+++ b/_pages/ko_KR/installing-boot9strap-(safecerthax).txt
@@ -49,7 +49,7 @@ safecerthax는 시스템 버전 1.0.0 - 11.14.0가 설치되어 있는 모든
#### 섹션 III - safecerthax 프록시
-In this section, you will change your Internet connection settings to use a proxy network designed to exploit the System Update feature of your console.
+이 섹션에서는 콘솔의 본체 업데이트 기능을 이용하도록 설계된 프록시 네트워크를 사용하도록 인터넷 연결 설정을 변경합니다.
{% include_relative include/addproxy.txt %}
1. 콘솔을 종료해 주세요
diff --git a/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt b/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt
index e63b57fde6..f26f5437cb 100644
--- a/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt
+++ b/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt
@@ -23,9 +23,6 @@ SSLoth 익스플로잇의 도움을 받아 이러한 확인을 건너뛸 수 있
SSLoth는 시스템 버전 11.13.0 및 이전 버전에 있는 사용자가 브라우저 버전 확인을 건너뛰고, 이후 universal-otherapp과 함께 사용할 수 있는 new-broserhax 또는 old-browserhax (모든 지역의 시스템 버전 11.4.0에서 11.13.0에서 호환됨) 을 사용할 수 있게 합니다.
-만약 콘솔을 게임 카드로 통해 업데이트 했다면, 이 방법을 사용할 수 없습니다. 이 경우, 업데이트하지 말고, [Nintendo Homebrew Discord 서버](https://discord.gg/MWxPgEp)에서 도움을 요청하세요.
-{: .notice--warning}
-
### 준비물
* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (직접 다운로드)
diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt
index ce15f56bb8..79d107f525 100644
--- a/_pages/ko_KR/installing-boot9strap-(usm).txt
+++ b/_pages/ko_KR/installing-boot9strap-(usm).txt
@@ -70,9 +70,9 @@ BannerBomb3와 unSAFE_MODE의 더 자세한 설명은 다음 (영어) 페이지
1. 콘솔을 시작해 주세요
1. 콘솔에서 본체 설정을 열어 주세요
1. `인터넷 설정` -> `인터넷 접속 설정`으로 이동해 주세요
-1. Ensure that all three connections are named "Haaaaaaaxxxxxxxxx..."
- + Do NOT change these settings!
- + If all three connections are NOT all named "Haaaaaaaxxxxxxxxx...", STOP! Something went wrong in this section and MUST be fixed before you can continue
+1. 세 개의 연결 이름이 모두 "Haaaaaaaxxxxxxxxx..."인지 확인해 주세요
+ + 이 설정을 변경하지 마세요!
+ + 세 설정 중 하나라도 "Haaaaaaaxxxxxxxxx..."로 표시되지 **않는다면**, **멈추세요!** 이 섹션을 진행하면서 문제가 발생했으며, 계속하기 전에 **반드시** 수정되어야 합니다
1. 콘솔을 종료해 주세요
#### 섹션 III - unSAFE_MODE
diff --git a/_pages/ko_KR/region-changing.txt b/_pages/ko_KR/region-changing.txt
index 313578f0d3..74913ad71c 100644
--- a/_pages/ko_KR/region-changing.txt
+++ b/_pages/ko_KR/region-changing.txt
@@ -13,7 +13,7 @@ Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https:/
이 페이지에서는 이미 Luma3DS와 boot9strap이 설치되어 있는 것으로 가정합니다. 이 웹사이트를 끝까지 진행했다면 (마무리 단계), Luma3DS와 boot9strap이 설치되어 있는 것입니다.
{: .notice--info}
-이 과정의 일부분으로, 시스템 설정을 초기화하게 됩니다. 이것은 사용자 이름, 국가, 언어 등을 포함합니다. 설치된 게임과 세이브 데이터에는 영향을 주지 않습니다.
+As a part of this process, your system settings will be reset to its defaults. 이것은 사용자 이름, 국가, 언어 등을 포함합니다. **Installed games and their save data will not be affected.**
{: .notice--warning}
{% capture notice-6 %}
@@ -21,10 +21,10 @@ Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https:/
+ (만약 있다면) Nintendo 네트워크 ID를 이용할 수 없게 됩니다. NNID들은 작성된 지역에서만 사용할 수 있습니다.
+ 이전에 [eShop 계정을 지우더라도 (영어)](https://en-americas-support.nintendo.com/app/answers/detail/a_id/74/~/how-to-delete-a-nintendo-eshop-account), eShop에 접속하지 못할 수 있습니다. 몇몇 타이틀들은, 계정 삭제 후도 3DS 링크를 유지하려는 경향이 있어서입니다 (특히 New 3DS에서).
- + e숍에서 구매는 못하지만, 게임 업데이트는 아직도 다운로드 할 수 있습니다. 업데이트들은 보통 온라인 플레이를 할 시 필요합니다.
- + This logic extends to system transfers, meaning you would not be able to perform a system transfer from a USA 3DS to a region-changed JPN-to-USA 3DS.
- + That being said, system transfer and game updates are region locked anyway (e.g. Japanese eShop only has Japanese game updates).
-+ **콘솔을 벽돌로 하는 것을 감수하지 않고선 커스텀 펌웨어를 지울 수 없습니다!** 만약 미래에 커스텀 펌웨어를 지우려고 생각한다면, **절대로** 지역 변경을 하기 전의 NAND 백업을 복원하고 나서 해야 합니다.
+ + e숍에서 더 이상 구매할 수 없지만 게임 업데이트는 계속 제공되기 때문에 여전히 관련이 있습니다. 업데이트들은 보통 온라인 플레이를 할 시 필요합니다.
+ + 이 로직은 데이터 이사를 할 때에도 적용됩니다. 즉, USA 3DS로부터 JPN에서 USA로 지역 변경한 3DS로의 데이터 이사는 불가합니다.
+ + 따라서, 데이터 이사와 게임 업데이트는 여전히 지역 제한이 걸려 있습니다 (예: 일본 eShop에서는 일본 게임 업데이트만 가능합니다).
++ **콘솔을 벽돌로 하는 것을 감수하지 않고선 커스텀 펌웨어를 지울 수 없습니다!** 만약 미래에 커스텀 펌웨어를 지우려고 생각한다면, **반드시** 지역 변경을 하기 전의 NAND 백업을 복원하고 나서 해야 합니다.
{% endcapture %}