mset9: remove accidental brackets
This commit is contained in:
parent
876f92fa0b
commit
82ee35b2f0
1 changed files with 2 additions and 2 deletions
|
@ -25,7 +25,7 @@ This method requires a computer running Windows or Linux. macOS is NOT supported
|
|||
|
||||
### Instructions
|
||||
|
||||
On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the [troubleshooting](troubleshooting#installing-boot9strap-(mset9) page.
|
||||
On this page, you will use the MSET9 script, which is used to trigger MSET9. If you get a numbered error (e.g. Error 01) when running the script, the solution to that error can most likely be found on the [troubleshooting](troubleshooting#installing-boot9strap-mset9) page.
|
||||
{: .notice--info}
|
||||
|
||||
#### Section I - Prep Work
|
||||
|
@ -59,7 +59,7 @@ In this section, you will prepare the SD card data necessary for the MSET9 explo
|
|||
|
||||
+ Ensure that the correct console model and version is displayed
|
||||
1. Type `1`, then press Enter to ensure your console is prepared for MSET9
|
||||
+ If you get an error, check the [troubleshooting](troubleshooting#installing-boot9strap-(mset9), then try again
|
||||
+ If you get an error, check the [troubleshooting](troubleshooting#installing-boot9strap-mset9), then try again
|
||||
1. If you see the message "Everything appears to be functional!", MSET9 is ready to be injected. Press Enter to close the MSET9 script
|
||||
1. Reinsert your SD card into your console
|
||||
1. Power on your console
|
||||
|
|
Loading…
Reference in a new issue