New Crowdin translations (#1238)
This commit is contained in:
Devon Maloney
Plailect
parent
825569e5f8
commit
83f88354f5
170 changed files with 936 additions and 738 deletions
|
|
@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Get Started" #
|
||||
cta_url: "get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Ensure you have a working payload.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Get Started" #
|
||||
cta_url: "get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Ensure you have a working payload.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Get Started" #
|
||||
cta_url: "get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Ensure you have a working payload.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Get Started" #
|
||||
cta_url: "get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Ensure you have a working payload.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Get Started" #
|
||||
cta_url: "get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Ensure you have a working payload.
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
|
|||
+ **Themely** *(installiert benutzerdefinierte Themes)*
|
||||
+ **Luma3DS Updater** *(aktualisiert deine CFW Installation)*
|
||||
+ **GodMode9** *(Multifunktionstool, welches NAND- und Cartridge-Funktionen ausführen kann)*
|
||||
+ **Homebrew Launcher Loader** *(startet den Homebrew Launcher als normale Anwendung dank Rosalina's magie)*
|
||||
+ **Homebrew Launcher Loader** *(startet den Homebrew Launcher als normale Anwendung dank Rosalinas Magie)*
|
||||
|
||||
{% endcapture %}
|
||||
|
||||
|
|
@ -55,15 +55,6 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. Falls dein Gerät auf einer Version unter 9.0.0 ist, wird es nicht starten, außer du benutzt eine andere Version von Luma3DS:
|
||||
+ Lade [eine alte Version von Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm) herunter
|
||||
+ Kopiere `boot.firm` in das Stammverzeichnis deiner SD-Karte *(überschreibe bestehende Dateien)*
|
||||
+ Ersetze diese `boot.firm` mit der aus [der neuesten Version von Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest), nachdem dein Gerät in späteren Schritten geupdatet wurde
|
||||
1. Wenn dein Gerät eine Version zwischen 3.0.0 und (inklusive) 4.5.0 besitzt, wird dein Gerät nicht starten bis du die die nötige Firmware herunterlädst:
|
||||
+ Lade [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) herunter und ändere ihren Namen zu `native.firm`
|
||||
+ Lade dir [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) herunter
|
||||
+ Kopiere `native.firm` und `cetk` in den `/luma/` Ordner auf deiner SD-Karte
|
||||
+ Lösche beide dieser Dateien nachdem du dein Gerät später wie beschrieben geupdatet hast
|
||||
1. Stecke deine SD-Karte nun wieder in deinen 3DS
|
||||
1. Schalte deine Konsole an
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in
|
|||
+ Updates mit B9S + Luma (welches du hast) sind sicher
|
||||
+ Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
|
||||
+ Sollte immer noch ein Fehler auftreten und dein NAND unter 9.2.0 sein, [befolge diese Schritte](9.2.0-ctrtransfer), versuche es dann erneut
|
||||
1. Wenn dein Gerät vor dem Update auf einer niedrigeren Version als 9.0.0 war, ersetze `boot.firm` im Stammverzeichnis deiner SD-Karte, durch die in der [neuesten Version von Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Falls dein Gerät vor dem Updaten auf einer Version zwischen 3.0.0 und 4.5.0 war, lösche `native.firm` und `cetk` aus dem `/luma/` Ordner deiner SD-Karte
|
||||
|
||||
##### Abschnitt III - Starten von FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ title: "Los geht's (New 3DS)"
|
|||
Wähle die passende Methode für deine Version aus der unteren Tabelle.
|
||||
{: .notice--primary}
|
||||
|
||||
Beachte, dass die "from" und "to"-Felder inklusive sind. Das heißt, dass die Zeile "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
|
||||
Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Zeile "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
|
||||
{: .notice--info}
|
||||
|
||||
Beachten Sie, dass die letzte Zahl Ihrer System-Version (die durch einen Bindestrich vorangestellt ist) sich auf die Version Ihres Browsers bezieht. Derzeit ist die Browserversion irrelevant für den neuen 3DS in diesem Guide.
|
||||
|
|
@ -28,8 +28,8 @@ Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den
|
|||
</colgroup>
|
||||
<thead>
|
||||
<tr>
|
||||
<th style="text-align: center; font-weight: bold;"> aus</th>
|
||||
<th style="text-align: center; font-weight: bold;"> aus</th>
|
||||
<th style="text-align: center; font-weight: bold;"> Von</th>
|
||||
<th style="text-align: center; font-weight: bold;"> Bis</th>
|
||||
<th style="text-align: center; font-weight: bold;"></th>
|
||||
</tr>
|
||||
</thead>
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ Wenn du deinen 3DS bereits gehackt hast und eine CFW mit EmuNAND hast, folge ein
|
|||
Beachte bitte, dass Screenshots im Guide vergrößert werden können, um mehr Kontext zu zeigen, indem du auf sie klickst.
|
||||
{: .notice--info}
|
||||
|
||||
Bevor Sie beginnen, sollten die Windows-Nutzer die Option zum Anzeigen der Datei-Erweiterungen aktivieren mit [Datei-Erweiterungen (Windows)](file-extensions-(windows))!
|
||||
Bevor du beginnst, solltest du als Windows-Benutzer die Option zum Anzeigen der Datei-Erweiterungen aktivieren mit [Datei-Erweiterungen (Windows)](file-extensions-(windows))!
|
||||
{: .notice--info}
|
||||
|
||||
Bevor du anfängst, solltest du deine SD-Karte auf Fehler überprüfen. Verwende dazu [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), oder [F3X (macOS)](f3x-(mac))!
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Anleitung" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Los geht's" #
|
||||
cta_url: "/de_DE/get-started"
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@ Stelle sicher, dass die Drahtloskommunikation deiner Konsole eingeschaltet ist,
|
|||
|
||||
Beachten Sie, dass Karten-Updates nur Updates für Kernfunktionen wie die Systemeinstellungen, das Home Menü, etc. liefern. Karten-Updates aktualisieren nicht Nintendo 3DS Sound und Netzwerkfunktionen, wie den Internetbrowser, den eShop, die StreetPass Mii Plaza oder der System-Transfer.
|
||||
<br><br>
|
||||
Dies bedeutet, dass das Verwenden von Karten-Updates einer Version eines älteren Nintendo 3DS Sound *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions) *, das eine neuere Version des Nintendo 3DS Sound [Soundhax](homebrew-launcher-(soundhax))! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen!
|
||||
Das bedeutet, dass ein Karten-Update von einer Systemversion, die eine ältere Version von Nintendo 3DS Sound enthält *(<7.0.0 auf Old 3DS Systemen in den Regionen EUR, JPN, KOR und USA)*, auf eine Systemversion mit neuerer Version von Nintendo 3DS Sound, [Soundhax](homebrew-launcher-(soundhax)) unbrauchbar machen wird! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen!
|
||||
{% endcapture %}
|
||||
|
||||
<div class="notice--warning">{{ notice-1 | markdownify }}</div>
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
|
|||
+ Falls dein Spiel einen Fehler über beschädigte oder nicht aufrufbare Speicherdaten anzeigt, stelle sicher, dass du **die Inhalte** des Ordners `savedata`, und nicht den Ordner `savedata` selbst kopiert hast
|
||||
+ Falls dein Spiel sich normal verhält und dir keine Fehlermeldung über `boot.nds` anzeigt, dann solltest du aufhören und herausfinden, was schief gelaufen ist
|
||||
+ Wenn du einen schwarzen Bildschirm bekommst, [folge diesen Problembehandlungen](troubleshooting#twl_broken)
|
||||
+ Falls das Spiel auf dem **Ziel 3DS** fehlt oder einen Fehler über beschädigte oder nicht aufrufbare Speicherstände anzeigt, [folge dieser Anleitung zur Problembehandlung](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Abschnitt III - Systemtransfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
|
|||
+ Du kannst auch einfach [die NNID vom **Quell-3DS** entfernen](https://3ds.guide/troubleshooting#rm_nnid), falls du es bevorzugst, dass diese auf **dem Ziel-3DS** bleibt
|
||||
1. Starte den **Quell-3DS** neu, während du beim Booten (Start) gedrückt hälst, um den Luma3DS Chainloader anzuzeigen
|
||||
1. Starte GodMode9 indem du (A) drückst
|
||||
1. Navigiere zu `[0:] SDCARD`
|
||||
1. Drücke (A) auf deiner NAND `.bin`, um es auszuwählen, wähle dann" NAND image options... " und wähle dann "Restore SysNAND (safe) "
|
||||
1. Navigiere zu `[0:] SDCARD` ->` gm9out`
|
||||
1. Drücke (A) auf `nand.bin`, um es auszuwählen, wähle dann "NAND image options...", dann wähle "Restore SysNAND (safe)"
|
||||
1. Drücke (A), um SysNAND-Änderungen zu aktivieren. Gib danach die angezeigte Tastenkombination ein
|
||||
+ Die Installation von boot9strap wird dadurch nicht überschrieben
|
||||
1. Gib die angezeigte Tastenkombination ein, um SysNAND-Änderungen (auf erster Ebene) zu aktivieren
|
||||
|
|
@ -139,12 +138,11 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
|
|||
1. Kopiere die 11.4.0 `.firm` entsprechend des **Ziel-3DS** in das `boot9strap`-Verzeichnis im Stammverzeichnis der SD-Karte des **Ziel-3DS**
|
||||
1. Kopiere `boot9strap.firm` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
|
||||
1. Starte b9sTool indem du das DSiWare-Spiel auf deinem **Ziel-3DS** startest
|
||||
+ Wenn das Spiel b9sTool nicht startet, [folge diesem Guide](troubleshooting#ts_dsiware) zur Fehlerbehebung
|
||||
+ Falls das Spiel fehlt oder b9sTool nicht startet, befolge [diese Fehlerbehandlung](troubleshooting#ts_dsiware)
|
||||
1. Wähle "Dump f0f1" um ein Backup der FIRM **des Ziel-3DS** zu erstellen
|
||||
1. Merke dir wo sich das FIRM Backup befindet
|
||||
1. Beende b9sTool
|
||||
+ Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
|
||||
1. Stecke die SD-Karte wieder in deinen Computer und kopiere dort `F0F1_N3DS.bin` oder `F0F1_O3DS.bin` ( je nachdem, welches Gerät du hast) zu einem sicheren Ort; mache mehrere Kopien in mehreren Ordnern; dieses Backup wird dich von einem Brick schützen, falls etwas schiefgehen sollte
|
||||
1. Stecke deine SD-Karte in deinen Computer und kopiere `F0F1_N3DS.bin` oder `F0F1_O3DS.bin` (abhängig von deinem Gerät) aus dem `boot9strap` Ordner an einen sicheren Ort; erstelle Sicherheitskopieren an mehreren Orten; diese Sicherheitskopie wird dich vor einem Brick bewahren, sollte etwas schiefgehen
|
||||
1. Lege die SD-Karte in den **Ziel-3DS** ein
|
||||
|
||||
##### Abschnitt VI - Überschreiben der FIRM des Zielsystems
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
|
|||
+ Du kannst auch einfach [die NNID vom **Quell-3DS** entfernen](https://3ds.guide/troubleshooting#rm_nnid), falls du es bevorzugst, dass diese auf **dem Ziel-3DS** bleibt
|
||||
1. Starte den **Quell-3DS** neu, während du beim Booten (Start) gedrückt hälst, um den Luma3DS Chainloader anzuzeigen
|
||||
1. Starte GodMode9 indem du (A) drückst
|
||||
1. Navigiere zu `[0:] SDCARD`
|
||||
1. Drücke (A) auf deiner NAND `.bin`, um es auszuwählen, wähle dann" NAND image options... " und wähle dann "Restore SysNAND (safe) "
|
||||
1. Navigiere zu `[0:] SDCARD` ->` gm9out`
|
||||
1. Drücke (A) auf `nand.bin`, um es auszuwählen, wähle dann "NAND image options...", dann wähle "Restore SysNAND (safe)"
|
||||
1. Drücke (A), um SysNAND-Änderungen zu aktivieren. Gib danach die angezeigte Tastenkombination ein
|
||||
+ Die Installation von boot9strap wird dadurch nicht überschrieben
|
||||
1. Gib die angezeigte Tastenkombination ein, um SysNAND-Änderungen (auf erster Ebene) zu aktivieren
|
||||
|
|
@ -152,10 +152,9 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
|
|||
+ **The Legend of Zelda: Four Swords**: Das Spiel starten
|
||||
+ Wenn dein Spiel nicht die gehackte Speicherdatei installiert hat, [folge diesem Fehlerbehebungsguide](troubleshooting#ts_dsiware)
|
||||
1. Wähle "Dump f0f1" um ein Backup der FIRM **des Ziel-3DS** zu erstellen
|
||||
1. Merke dir wo sich das FIRM Backup befindet
|
||||
1. Beende b9sTool
|
||||
+ Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
|
||||
1. Stecke die SD-Karte wieder in deinen Computer und kopiere dort `F0F1_N3DS.bin` oder `F0F1_O3DS.bin` ( je nachdem, welches Gerät du hast) zu einem sicheren Ort; mache mehrere Kopien in mehreren Ordnern; dieses Backup wird dich von einem Brick schützen, falls etwas schiefgehen sollte
|
||||
1. Stecke deine SD-Karte in deinen Computer und kopiere `F0F1_N3DS.bin` oder `F0F1_O3DS.bin` (abhängig von deinem Gerät) aus dem `boot9strap` Ordner an einen sicheren Ort; erstelle Sicherheitskopieren an mehreren Orten; diese Sicherheitskopie wird dich vor einem Brick bewahren, sollte etwas schiefgehen
|
||||
1. Lege die SD-Karte in den **Ziel-3DS** ein
|
||||
|
||||
##### Abschnitt VI - Überschreiben der FIRM des Zielsystems
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browserbasierte Exploits (wie browserhax oder 2xrsa) sind oft instabil und stür
|
|||
1. Solltest du in den abgesicherten Modus kommen, aktualisiere dein Gerät
|
||||
1. Deine Konsole könnte gebrickt sein. Für Hilfe auf Englisch, frage auf dem [Nintendo Homebrew Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />Nach dem DSiWare Transfer funktioniert die gehackte DSiWare nicht
|
||||
|
||||
1. Starte den **Quell-3DS** neu, während du beim Booten (Start) gedrückt hälst, um den Luma3DS Chainloader anzuzeigen
|
||||
1. Starte GodMode9 indem du (A) drückst
|
||||
1. Navigiere zu `[0:] SDCARD` ->` gm9out`
|
||||
1. Drücke (A) auf `nand.bin`, um die Datei auszuwählen, dann "NAND image options...", dann "Restore SysNAND (safe)"
|
||||
1. Drücke (A), um SysNAND-Änderungen zu aktivieren. Gib danach die angezeigte Tastenkombination ein
|
||||
+ Die Installation von boot9strap wird dadurch nicht überschrieben
|
||||
1. Gib die angezeigte Tastenkombination ein, um SysNAND-Änderungen (auf erster Ebene) zu aktivieren
|
||||
+ Dieser Vorgang nimmt einige Zeit in Anspruch
|
||||
1. Sobald dies abgeschlossen ist drücke (A) um fortzufahren
|
||||
1. Falls das Spiel auf dem **Ziel-3DS** fehlt, melde dich mit der NNID, die du zum Kauf des Spiels benutzt hast, auf dem **Ziel-3DS** an und lade das Spiel erneut herunter
|
||||
+ Möglicherweise musst du zuerst das Spiel über die "Datenverwaltung" in den "Systemeinstellungen" löschen
|
||||
+ Falls der **Ziel-3DS** nicht auf der aktuellsten Version ist, musst du möglicherweise ctr-httpwn nutzen, um den eShop betreten zu können
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. Gehe auf dem **Quell-3DS** in die Systemeinstellungen, "Datenverwaltung", "DSiWare" und kopiere dein DSiWare-Spiel auf deine SD-Karte
|
||||
1. Lege entweder die SD-Karte des **Quell-3DS** in den **Ziel-3DS**, oder benenne den `Nintendo 3DS` Ordner auf der SD-Karte des **Ziel-3DS** um und kopiere dann den `Nintendo 3DS` Ordner von der SD-Karte des **Quell-3DS** auf die SD-Karte des **Ziel-3DS**
|
||||
1. Gehe auf dem **Ziel-3DS** in die Systemeinstellungen, "Datenverwaltung", "DSiWare" und kopiere dein DSiWare-Spiel auf das System
|
||||
1. Stelle den ursprünglichen Zustand der SD-Karten wieder her und fahre dann mit der DSiWare-Injektion fort
|
||||
|
||||
## <a name="ts_sys_a9lh" />Schwarzer Bildschirm beim Start des SysNAND nachdem boot9strap installiert wurde
|
||||
|
||||
1. Stelle sicher, dass du eine funktioniere payload hast.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "Οδηγός 3DS" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Ας αρχίσουμε" #
|
||||
cta_url: "/el_GR/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Βεβαιωθείτε πως έχετε ένα λειτουργικό payload.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ Durin' 'tis process, we also setup programs such as th' followin':
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Get Started" #
|
||||
cta_url: "/en_PT/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Ensure you have a working payload.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ Durante este proceso, también instalaremos programas como los siguientes:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. Si tu consola está en una versión anterior a la 9.0.0, tu consola no iniciará a menos que utilices una versión alternativa de Luma3DS:
|
||||
+ Descarga [una versión anterior de Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copia `boot.firm` a la raíz de tu tarjeta SD *(sobreescribiendo archivos existente)*
|
||||
+ Sustituye este `boot.firm` con el de la [última versión de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) luego de actualizar tu consola más adelante en estas instrucciones
|
||||
1. Si tu consola está entre una versión entre 3.0.0 y 4.5.0 (inclusive), tu dispositivo no encenderá hasta que descargues manualmente el firmware requerido:
|
||||
+ Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `native.firm`
|
||||
+ Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copia `native.firm` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
|
||||
+ Borra ambos archivos después de actualizar tu dispositivo más adelante en estas instrucciones
|
||||
1. Vuelve a insertar tu tarjeta SD en tu consola
|
||||
1. Enciende tu consola
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
|
|||
+ Actualizar la consola teniendo B9S y Luma (lo que acabas de instalar) es seguro
|
||||
+ Si esto te da un error, ajusta tu configuración de DNS a "obtención automática"
|
||||
+ Si esto te sigue dando un error y tu NAND está por debajo de 9.2.0, [sigue 9.2.0 CTRTransfer(9.2.0-ctrtransfer), luego reintenta actualizar
|
||||
1. Si tu consola estaba en una versión anterior a 9.0.0 antes de actualizar, reemplaza `boot.firm` en la raíz de tu tarjeta SD con el de la [última versión de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Si tu consola estaba en una versión entre 3.0.0 y 4.5.0 antes de actualizar, elimina `native.firm` y `cetk` de la carpeta `/luma/` en tu tarjeta SD
|
||||
|
||||
##### Sección III - Iniciar FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "Guía de 3DS" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Comencemos" #
|
||||
cta_url: "/es_ES/get-started"
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
|
|||
+ Si tu juego tiene un error sobre datos de guardado corruptos o inaccesibles, asegúrate que hayas copiado **el contenido de** la carpeta `savedata` y no la carpeta `savedata` en sí
|
||||
+ Si tu juego funciona con normalidad y no da ningún error sobre `boot.nds`, entonces debes parar y averiguar qué salió mal
|
||||
+ Si obtienes una pantalla negra, [sigue esta guía de solución de problemas](troubleshooting#twl_broken)
|
||||
+ Si el juego no aparece en la **3DS de destino** o tiene un error sobre datos de guardado corruptos o inaccesibles, [sigue esta guía de solución de problemas](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Sección III - Transferencia del Sistema
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
|
|||
+ Puedes también [eliminar el ID de Nintendo Network](https://3ds.guide/troubleshooting#rm_nnid) de **la 3DS de Origen** si prefieres que permanezca en **la 3DS de Destino**
|
||||
1. Reinicia **la 3DS de origen** manteniendo presionado (Start) para ingresar al menú de selección de payloads de Luma3DS
|
||||
1. Inicia GodMode9 presionando (A)
|
||||
1. Ve a `[0:] SDCARD`
|
||||
1. Presiona (A) sobre el `nand.bin` de tu NAND para seleccionarlo, luego selecciona "NAND image options..." y luego selecciona "Restore SysNAND (safe)"
|
||||
1. Ve a `[0:] SDCARD` -> `gm9out`
|
||||
1. Presiona (A) sobre `nand.bin` para seleccionarlo, luego selecciona "NAND image options..." y luego "Restore SysNAND (safe)"
|
||||
1. Presiona (A) para desbloquear la sobreescritura de la SysNAND, luego introduce la combinación de teclas mostrada
|
||||
+ Esto no sobreescribirá tu instalación de boot9strap
|
||||
1. Ingresa la combinación de teclas mostrada para desbloquear la escritura de la SysNAND (lvl1)
|
||||
|
|
@ -139,12 +138,11 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
|
|||
1. Copia el archivo 11.4.0 `.firm` correspondiente a **la 3DS de destino** a la carpeta `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino**
|
||||
1. Copia el archivo `boot9strap.firm` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD
|
||||
1. Ejecuta b9sTool iniciando tu juego DSiWare en **la 3DS de destino**
|
||||
+ Si el juego no inicia b9sTool, [sigue esta guía de resolución de problemas](troubleshooting#ts_dsiware)
|
||||
+ Si el juego no está o no inicia b9sTool, [sigue esta guía de resolución de problemas](troubleshooting#ts_dsiware)
|
||||
1. Selecciona "Dump F0F1" para hacer una copia de seguridad del FIRM de **la 3DS de destino**
|
||||
1. Toma nota de la ubicación de la copia de seguridad del FIRM
|
||||
1. Sal de b9sTool
|
||||
+ Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
|
||||
1. Pon tu tarjeta SD en tu computadora, luego copia `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (dependiendo de tu consola) a una ubicación segura; haz respaldos en múltiples ubicaciones; este respaldo te salvará de un brick por si algo sale mal
|
||||
1. Introduce tu tarjeta SD en tu computadora, luego copia `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (dependiendo de tu consola) de la carpeta `boot9strap` a una ubicación segura; haz copias de seguridad en distintas ubicaciones; este respaldo te salvará de un brick si algo sale mal
|
||||
1. Vuelve a insertar tu tarjeta SD en la **3DS de destino**
|
||||
|
||||
##### Sección VI - Flashear el FIRM de la 3DS de destino
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
|
|||
+ Puedes también [eliminar el ID de Nintendo Network](https://3ds.guide/troubleshooting#rm_nnid) de **la 3DS de Origen** si prefieres que permanezca en **la 3DS de Destino**
|
||||
1. Reinicia **la 3DS de origen** manteniendo presionado (Start) para ingresar al menú de selección de payloads de Luma3DS
|
||||
1. Inicia GodMode9 presionando (A)
|
||||
1. Ve a `[0:] SDCARD`
|
||||
1. Presiona (A) sobre el `nand.bin` de tu NAND para seleccionarlo, luego selecciona "NAND image options..." y luego selecciona "Restore SysNAND (safe)"
|
||||
1. Ve a `[0:] SDCARD` -> `gm9out`
|
||||
1. Presiona (A) sobre `nand.bin` para seleccionarlo, luego selecciona "NAND image options..." y luego "Restore SysNAND (safe)"
|
||||
1. Presiona (A) para desbloquear la sobreescritura de la SysNAND, luego introduce la combinación de teclas mostrada
|
||||
+ Esto no sobreescribirá tu instalación de boot9strap
|
||||
1. Ingresa la combinación de teclas mostrada para desbloquear la escritura de la SysNAND (lvl1)
|
||||
|
|
@ -152,10 +152,9 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
|
|||
+ **The Legend of Zelda: Four Swords**: Sólo inicia el juego
|
||||
+ Si el juego no tiene la partida hackeada instalada, [sigue esta guía de solución de problemas](troubleshooting#ts_dsiware)
|
||||
1. Selecciona "Dump F0F1" para hacer una copia de seguridad del FIRM de **la 3DS de destino**
|
||||
1. Toma nota de la ubicación de la copia de seguridad del FIRM
|
||||
1. Sal de b9sTool
|
||||
+ Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
|
||||
1. Pon tu tarjeta SD en tu computadora, luego copia `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (dependiendo de tu consola) a una ubicación segura; haz respaldos en múltiples ubicaciones; este respaldo te salvará de un brick por si algo sale mal
|
||||
1. Introduce tu tarjeta SD en tu computadora, luego copia `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (dependiendo de tu consola) de la carpeta `boot9strap` a una ubicación segura; haz copias de seguridad en distintas ubicaciones; este respaldo te salvará de un brick si algo sale mal
|
||||
1. Vuelve a insertar tu tarjeta SD en la **3DS de destino**
|
||||
|
||||
##### Sección VI - Flashear el FIRM de la 3DS de destino
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Los exploits basados en navegador (como browserhax o 2xrsa) son a menudo inestab
|
|||
1. Si entras al modo seguro, actualiza tu consola
|
||||
1. Tu consola podría estar brickeada. Para soporte, puedes pedir ayuda (*en inglés*) en el [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />Después de hacer la transferencia de DSiWare Transfer, mi consola hackeada con DSiWare no funciona
|
||||
|
||||
1. Reinicia **la 3DS de origen** manteniendo presionado (Start) para ingresar al menú de selección de payloads de Luma3DS
|
||||
1. Inicia GodMode9 presionando (A)
|
||||
1. Ve a `[0:] SDCARD` -> `gm9out`
|
||||
1. Presiona (A) sobre `nand.bin` para seleccionarlo, luego selecciona "NAND image options…" y luego "Restore SysNAND (safe)"
|
||||
1. Presiona (A) para desbloquear la sobreescritura de la SysNAND, luego introduce la combinación de teclas mostrada
|
||||
+ Esto no sobreescribirá tu instalación de boot9strap
|
||||
1. Ingresa la combinación de teclas mostrada para desbloquear la escritura de la SysNAND (lvl1)
|
||||
+ Este proceso tomará algún tiempo
|
||||
1. Una vez que haya terminado, presiona (A) para continuar
|
||||
1. Si no ves el juego en la **3DS de destino**, pon el NNID con el que compraste el juego en la **3DS de destino** y vuelve a descargarlo
|
||||
+ Quizá tengas que eliminar el juego desde "Gestión de datos" en la "Configuración de la consola" primero
|
||||
+ Si la **3DS de destino** no está en la última versión, quizá tengas que ejecutar ctr-httpwn para acceder a la eShop
|
||||
1. En la **3DS destino** haz los pasos para inyectar el save (y el `.app` si estás usando la página del `.app`)
|
||||
1. En la **3DS de origen**, ve a Configuración de la consola, "Gestión de datos", "DSiWare" y copia el juego a la tarjeta SD
|
||||
1. Pon la tarjeta SD de la **3DS de origen** en la **3DS de destino**, o renombra la carpeta `Nintendo 3DS` en la tarjeta SD de la **3DS de destino** y copia la carpeta `Nintendo 3DS` de la **3DS de origen** a la tarjeta SD de la **3DS de destino**
|
||||
1. En la **3DS de origen**, ve a Configuración de la consola, "Gestión de datos", "DSiWare" y copia el juego al sistema
|
||||
1. Deja las tarjetas SD como estaban al principio y continúa con la Inyección de DSiWare
|
||||
|
||||
## <a name="ts_sys_b9s" />Pantalla negra al iniciar la SysNAND luego de instalar boot9strap
|
||||
|
||||
1. Asegúrate de tener un payload funcional.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Aseta SD-korttisi takaisin konsoliisi
|
||||
1. Käynnistä konsolisi
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS-opas" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Aloita" #
|
||||
cta_url: "/fi_FI/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Avaa GodMode9 painamalla (A):ta
|
||||
1. Mene hakemistoon `[0:] SDCARD`
|
||||
1. Paina (A):ta NAND-`.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
|
||||
1. Mene hakemistoon `[0:] SDCARD` → `gm9out`
|
||||
1. Paina (A):ta `nand.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
|
||||
1. Paina (A):ta ottaaksesi käyttöön SysNANDin ylikirjoittamisen ja syötä annettu painikeyhdistelmä
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Syötä annettu painikeyhdistelmä ottaaksesi käyttöön SysNANDiin kirjoittamisen (lvl1)
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Avaa GodMode9 painamalla (A):ta
|
||||
1. Mene hakemistoon `[0:] SDCARD`
|
||||
1. Paina (A):ta NAND-`.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
|
||||
1. Mene hakemistoon `[0:] SDCARD` → `gm9out`
|
||||
1. Paina (A):ta `nand.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
|
||||
1. Paina (A):ta ottaaksesi käyttöön SysNANDin ylikirjoittamisen ja syötä annettu painikeyhdistelmä
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Syötä annettu painikeyhdistelmä ottaaksesi käyttöön SysNANDiin kirjoittamisen (lvl1)
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Selainhaavoittuvuuksiin perustuvat käynnistystavat (kuten browserhax ja 2xrsa)
|
|||
1. If you enter safe mode, update your device
|
||||
1. Konsolisi saattaa olla vioittunut. Kysy apua (englanniksi) [Nintendo Homebrew -palvelimelta Discordissa](https://discord.gg/MWxPgEp).
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Avaa GodMode9 painamalla (A):ta
|
||||
1. Mene hakemistoon `[0:] SDCARD` → `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Paina (A):ta ottaaksesi käyttöön SysNANDin ylikirjoittamisen ja syötä annettu painikeyhdistelmä
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Syötä annettu painikeyhdistelmä ottaaksesi käyttöön SysNANDiin kirjoittamisen (lvl1)
|
||||
+ Tämä proessi kestää jonkin aikaa
|
||||
1. Kun toiminto on suoritettu, paina (A):ta jatkaaksesi
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Varmista, että sinulla on toimiva käynnistystiedosto.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ Durant cette étape, nous allons également configurer les programmes suivants :
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. Si votre console possède un firmware antérieur à 9.0.0, votre console ne démarra pas sauf si vous utilisez une version alternative de Luma3DS:
|
||||
+ Téléchargez [Une ancienne version de Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copiez `boot.firm` à la racine de votre carte SD *(En écrasant les fichiers existants)*
|
||||
+ Remplacez le `boot.firm` avec celui de [la dernière version de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) après avoir mis à jour votre console plus tard dans ce guide
|
||||
1. Si votre appareil est sur une version entre 3.0.0 à 4.5.0 (inclue), votre appareil ne démarrera pas jusqu'à ce que vous téléchargiez manuellement le firmware requis :
|
||||
+ Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le `native.firm`
|
||||
+ Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copiez `native.firm` et `cetk` au dossier `/luma/` dans ta carte SD
|
||||
+ Supprimez ces deux fichiers après avoir mit à jour votre console plus loin dans ce mode d’emploi
|
||||
1. Réinsérez votre carte SD dans votre 3DS
|
||||
1. Allumez à présent votre 3DS
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
|
|||
+ Mettre à jour tout en utilisant B9S + Luma (ce que vous avez) sont sans danger
|
||||
+ Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
|
||||
+ Si cela vous donne encore une erreur et que votre NAND est en dessous de 9.2.0, [suivez 9.2.0 CTRTransfer](9.2.0-ctrtransfer), puis essayez de mettre à jour à nouveau
|
||||
1. Si votre console était dans un fimware antérieur à 9.0.0 avant la mise à jour, remplacez `boot.firm` à la racine de votre carte SD avec celui de [la dernière version de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Si votre console était dans un firmware compris entre 3.0.0 et 4.5.0 avant la mise à jour, supprimez `native.firm` et `cetk` de votre dossier `/luma/`sur votre carte SD
|
||||
|
||||
##### Section III - Lancez FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Bien Démarrer" #
|
||||
cta_url: "/fr_FR/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
|
|||
+ Si votre jeu montre une erreur à propos de données endommagées ou de sauvegarde innaccessible, vérifiez que vous aviez copié **le contenu du** dossier `savedata` et pas le dossier `savedata` lui-même
|
||||
+ Si votre jeu se comporte normalement et ne montre aucune erreur à propos de `boot.nds`, alors vous devez vous arrêter et essayer de comprendre ce qui s’est mal passé
|
||||
+ Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#twl_broken)
|
||||
+ Si le jeu est absent de **la 3DS cible** ou montre une erreur à propos de données corrompues ou de sauvegarde inaccessibles, [suivre ce guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - Transfert de données
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
|
|||
+ Vous pouvez également juste [supprimer le NNID](https://3ds.guide/troubleshooting#rm_nnid) de **la 3DS source** si vous préférez qu'il reste sur **la 3DS cible**
|
||||
1. Rallumez la **3DS source** en maintenant (Start) pour lancer le chainloader de Luma3DS
|
||||
1. Lancez GodMode9 en appuyant sur (A)
|
||||
1. Naviguez vers `[0:] SDCARD`
|
||||
1. Appuyez sur (A) sur votre NAND `.bin` pour le sélectionner, puis choisissez "NAND image options...", puis sélectionnez "Restore SysNAND (safe)"
|
||||
1. Naviguez vers `[0:] SDCARD` -> `gm9out`
|
||||
1. Appuyez sur (A) sur `nand.bin` pour le sélectionner, puis choisissez "NAND image options...", puis "Restore SysNAND (safe)"
|
||||
1. Appuyez sur (A) pour débloquer l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
|
||||
+ Ceci n'effacera pas votre installation boot9strap
|
||||
1. Entrez la combinaison de touche demandée pour débloquer l'écriture sur votre SysNAND (lvl1)
|
||||
|
|
@ -141,10 +140,9 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
|
|||
1. Lancement de b9sTool en démarrant votre jeu DSiWare sur **la 3DS cible**
|
||||
+ Si le jeu ne lance pas b9sTool, [suivez ce guide de dépannage](troubleshooting#ts_dsiware)
|
||||
1. Sélectionnez "Dump F0F1" pour sauvegarder le FIRM de la **3DS cible**
|
||||
1. Prenez note de l’emplacement de la sauvegarde de la NFIRM
|
||||
1. Sortez de b9sTool
|
||||
+ Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
|
||||
1. Mettez votre carte SD dans votre ordinateur, puis copiez `F0F1_N3DS.bin` ou `F0F1_O3DS.bin` (selon votre appareil) dans un endroit sûr ; faites des sauvegardes à plusieurs emplacements ; cette sauvegarde vous sauvera d’un BRICK si quelque chose se passe mal
|
||||
1. Mettez votre carte SD dans votre ordinateur, puis copiez `F0F1_N3DS.bin` ou `F0F1_O3DS.bin` (selon votre appareil) du dossier `boot9strap` dans un endroit sûr ; faites des sauvegardes à plusieurs emplacements ; cette sauvegarde vous sauvera d’un BRICK si quelque chose se passe mal
|
||||
1. Réinsérer votre carte SD dans **la 3DS cible**
|
||||
|
||||
##### Section VI - Flasher le FIRM de la 3DS cible
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
|
|||
+ Vous pouvez également juste [supprimer le NNID](https://3ds.guide/troubleshooting#rm_nnid) de **la 3DS source** si vous préférez qu'il reste sur **la 3DS cible**
|
||||
1. Rallumez la **3DS source** en maintenant (Start) pour lancer le chainloader de Luma3DS
|
||||
1. Lancez GodMode9 en appuyant sur (A)
|
||||
1. Naviguez vers `[0:] SDCARD`
|
||||
1. Appuyez sur (A) sur votre NAND `.bin` pour le sélectionner, puis choisissez "NAND image options...", puis sélectionnez "Restore SysNAND (safe)"
|
||||
1. Naviguez vers `[0:] SDCARD` -> `gm9out`
|
||||
1. Appuyez sur (A) sur `nand.bin` pour le sélectionner, puis choisissez "NAND image options...", puis "Restore SysNAND (safe)"
|
||||
1. Appuyez sur (A) pour débloquer l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
|
||||
+ Ceci n'effacera pas votre boot9strap
|
||||
1. Entrez la combinaison de touche demandée pour débloquer l'écriture sur votre SysNAND (lvl1)
|
||||
|
|
@ -152,10 +152,9 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
|
|||
+ **The Legend of Zelda: Four Swords**: Il suffit de démarrer le jeu
|
||||
+ Si votre jeu n’a pas la sauvegarde piratée d'installée, [suivez ce guide](troubleshooting#ts_dsiware)
|
||||
1. Sélectionnez "Dump F0F1" pour sauvegarder le FIRM de la **3DS cible**
|
||||
1. Prenez note de l’emplacement de la sauvegarde de la NFIRM
|
||||
1. Sortez de b9sTool
|
||||
+ Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
|
||||
1. Mettez votre carte SD dans votre ordinateur, puis copiez `F0F1_N3DS.bin` ou `F0F1_O3DS.bin` (selon votre appareil) dans un endroit sûr ; faites des sauvegardes à plusieurs emplacements ; cette sauvegarde vous sauvera d’un BRICK si quelque chose se passe mal
|
||||
1. Mettez votre carte SD dans votre ordinateur, puis copiez `F0F1_N3DS.bin` ou `F0F1_O3DS.bin` (selon votre appareil) du dossier `boot9strap` dans un endroit sûr ; faites des sauvegardes à plusieurs emplacements ; cette sauvegarde vous sauvera d’un BRICK si quelque chose se passe mal
|
||||
1. Réinsérer votre carte SD dans **la 3DS cible**
|
||||
|
||||
##### Section VI - Flasher le FIRM de la 3DS cible
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ Cela fonctionne sur la New3DS, Old3DS, New 2DS et Old 3DS sur *toutes* les versi
|
|||
|
||||
#### Ce dont vous aurez besoin
|
||||
|
||||
* Une image de votre NAND extraite à l’aide de votre [hardmod](http://www.consolex-bordeaux.fr/content/kit-hardmod-nand-2ds-3ds-new3ds)
|
||||
* Une image de votre NAND extraite à l’aide de votre [hardmod](https://gbatemp.net/threads/414498/) [Kits Hardmod](http://www.consolex-bordeaux.fr/content/kit-hardmod-nand-2ds-3ds-new3ds)
|
||||
* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, pas le fichier `devkit` et ni le fichier `ntr`)*
|
||||
* La dernière version de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
|
||||
+ Les utilisateurs de Windows peuvent utiliser le `.exe` compilé, tandis que les utilisateurs Mac et Linux devront avoir [Python 3](https://www.python.org/downloads/) installé pour exécuter le `.py`
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Les exploits basé sur le navigateur (tel que browserhax ou 2xrsa) sont parfois
|
|||
1. Si vous passez en mode sécurisé, mettre à jour votre console
|
||||
1. Votre console est peut-être brickée. Pour obtenir de l'aide, demandez de l'aide à [Nintendo Homebrew sur Discord(Anglais)](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />Après avoir fait le downgrade par DSiWare, mon DSiWare hacké ne fonctionne pas
|
||||
|
||||
1. Rallumez la **3DS source** en maintenant (Start) pour lancer le chainloader de Luma3DS
|
||||
1. Lancez GodMode9 en appuyant sur (A)
|
||||
1. Naviguez vers `[0:] SDCARD` -> `gm9out`
|
||||
1. Appuyez sur (A) sur `nand.bin` pour le sélectionner, puis choisissez "NAND image options...", puis "Restore SysNAND (safe)"
|
||||
1. Appuyez sur (A) pour débloquer l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
|
||||
+ Ceci n'effacera pas votre installation boot9strap
|
||||
1. Entrez la combinaison de touche demandée pour débloquer l'écriture sur votre SysNAND (lvl1)
|
||||
+ Ce processus pendra du temps
|
||||
1. Une fois le transfert terminé, appuyez sur (A) pour continuer
|
||||
1. Si vous ne voyez pas du tout le jeu sur **la 3DS cible**, liez le NNID avec lequel vous avez acheté le jeu sur **la 3DS cible** et re-téléchargez le
|
||||
+ Vous devrez peut-être tout d’abord supprimer le jeu depuis "Gestion des données" dans les Paramètres de la console
|
||||
+ Si **la 3DS cible** n'est pas à la dernière version, vous pourriez avoir à lancer ctr-httpwn pour accéder à l'eShop
|
||||
1. Sur la **3DS source**, effectuez les étapes d'injections de sauvegarde (et de `.app` si vous utilisez la page "injection d'`.app`")
|
||||
1. Sur la **3DS source, allez dans les Paramètres de la console, "Gestion des données", "DSiWare", puis copiez votre jeu DSiWare sur la carte SD
|
||||
1. Insérez la carte SD de la **3DS source** dans la **3DS cible**, ou bien renommez le dossier `Nintendo 3DS` sur la carte SD de la **3DS cible** et copiez le dossier `Nintendo 3DS` de la carte SD de la **3DS source** sur la carte SD de la **3DS cible**
|
||||
1. Sur la **3DS cible**, allez dans les Paramètres de la console, "Gestion des données", "DsiWare", puis copiez votre jeu DSiWare sur le système
|
||||
1. Remettez vos cartes SD comme avant, puis continuez votre Injection via DSiWare
|
||||
|
||||
## <a name="ts_sys_b9s" /> Écran noir au démarrage de SysNAND après l’installation de boot9strap
|
||||
|
||||
1. Assurez-vous d'avoir un payload fonctionnel.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ title: "סיום התהליך"
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. אם הקונסולה שלכם מתחת לגרסה 9.0.0, היא לא תפעל אלא אם כן תשתמשו בגרסא חלופית של Luma3DS:
|
||||
+ תורידו [גרסה מיוחדת של Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ תעתיקו את `boot.firm` אל שורש כרטיס הSD שלכם *(תשכתבו את הקובץ הקיים אם יש)*
|
||||
+ תחליפו את ה`boot.firm` הזה עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) אחרי שאתם מעדכנים את הקונסולה מאוחר יותר בהוראות
|
||||
1. אם המכשיר שלכם הוא על גרסה בין 3.0.0 ל-4.5.0, המכשיר שלכם שלכם לא יאתחל עד שתורידו את הקושחה המתאימה:
|
||||
תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`native.firm`
|
||||
+ תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ תעתיקו את `native.firm` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
|
||||
+ תמחקו את שני הקבצים האלו אחרי שאתם מעדכנים את המכשיר שלכם אחר כך בהוראות
|
||||
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
|
||||
1. תפעילו את המכשיר
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ title: "סיום התהליך"
|
|||
+ עדכונים שתבצעו תוך שימוש ב-B9S+Luma (במידה שיש לכם את שניהם) הם בטוחים לחלוטין
|
||||
+ אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
|
||||
+ אם זה ממשיך לתת לכם שגיאה והקונסולה שלכם מתחת לגרסה 9.2.0, עקבו אחרי [9.2.0 CTRtransfer](9.2.0-ctrtransfer), ואז תנסו לעדכן שוב
|
||||
1. אם הקונסולה שלכם הייתה מתחת לגרסה 9.0.0 לפני שעדכנתם אותה, תחליפו את ה`boot.firm` על שורש כרטיס הSD שלכם עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. אם הקונסולה שלכם הייתה על גרסה בין 3.0.0 ו4.5.0 לפני שעדכנתם, תמחקו את `native.firm` ואת `cetk` מתיקיית `/luma/` בכרטיס הSD שלכם
|
||||
|
||||
##### חלק III - הפעלת FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "מדריך ל3DS" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "צעדים ראשונים" #
|
||||
cta_url: "/he_IL/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
|
|||
+ אם למשחק יש שגיאה לגבי שמירה פגומה או לא ניתנת לגישה, תבדקו שהעתקתם את **התוכן של** תיקיית `savedata` ולא את התיקייה `savedata` בעצמה
|
||||
+ אם המשחק עובד כרגיל ולא נותן לכם את השגיאה לגבי boot.nds, תעצרו ותנסו להבין מה לא הלך טוב
|
||||
+ אם אתם מקבלים מסך שחור, [עקבו אחרי המדריך הבא](troubleshooting#twl_broken)
|
||||
+ אם המשחק חסר מ**קונסולת היעד** או שיש לו שגיאה לגבי שמירה פגומה או לא ניתנת לגישה, [עקבו אחרי המדריך הבא](troubleshooting#twl_broken)
|
||||
|
||||
#### חלק III - ביצוע System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
|
|||
+ אתם יכולים גם פשוט [למחוק את הNNID](https://3ds.guide/troubleshooting#rm_nnid) מ**קונסולת המקור** אם אתם מעדיפים שהוא ישאר על **קונסולת היעד**
|
||||
1. תפעילו מחדש את **קונסולת המקור** בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את תפריט הטעינה של Luma3DS
|
||||
1. תפעילו את GodMode9 על ידי לחיצת (A)
|
||||
1. נווטו ל`[0:] SDCARD`
|
||||
1. תלחצו (A) על קובץ ה`.bin` של הNAND שלכם כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
|
||||
1. נווטו אל `[0:] SDCARD` ושם אל `gm9out`
|
||||
1. תלחצו (A) על `nand.bin` כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
|
||||
1. לחצו (A) כדי לפתוח גישת שכתוב לSysNAND, ואז תלחצו על המקשים בסדר הנכון
|
||||
+ זה לא ישכתב את התקנת boot9strap שלכם
|
||||
1. תלחצו על המקשים בסדר הנכון כדי לפתוח גישת כתיבה לSysNAND (בlvl1)
|
||||
|
|
@ -139,12 +138,11 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
|
|||
1. תעתיקו את ה`.firm` של 11.4.0 שמתאים ל**קונסולת היעד** לתיקיית `boot9strap` על שורש כרטיס הSD של **קונסולת היעד**
|
||||
1. תעתיקו את`boot9strap.firm` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
|
||||
1. תפעילו את b9sTool על ידי הפעלת משחק הDSiWare שלכם על **קונסולת היעד**
|
||||
+ אם המשחק לא מפעיל את b9sTool, [תעקבו אחרי המדריך הזה לפתרון בעיות](troubleshooting#ts_dsiware)
|
||||
+ אם המשחק לא נמצא או לא מפעיל את b9sTool, [תעקבו אחרי המדריך הזה לפתרון בעיות](troubleshooting#ts_dsiware)
|
||||
1. תבחרו ב "Dump F0F1" כדי לגבות את הFIRM של **קונסולת היעד**
|
||||
1. שימו לב למקום גיבוי הFIRM
|
||||
1. תצאו מb9sTool
|
||||
+ אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
|
||||
1. תשימו את כרטיס הSD שלכם במחשב, ואז תעתיקו את `F0F1_N3DS.bin` או `F0F1_O3DS.bin` (תלוי במכשיר) למקום בטוח; תעשו גיבויים בכמה מקומות; זה ישמור עליכם מבריק אם משהו לא הולך כראוי
|
||||
1. תשימו את כרטיס הSD שלכם במחשב, ואז תעתיקו את `F0F1_N3DS.bin` או `F0F1_O3DS.bin` (תלוי במכשיר) מתיקיית `boot9strap` למקום בטוח; תעשו גיבויים בכמה מקומות; זה ישמור עליכם מבריק אם משהו לא הולך כראוי
|
||||
1. תכניסו מחדש את כרטיס הSD שלכם אל **קונסולת היעד**
|
||||
|
||||
##### חלק VI - התקנת הFIRM הפרוץ על קונסולת היעד
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)"
|
|||
+ אתם יכולים גם פשוט [למחוק את הNNID](https://3ds.guide/troubleshooting#rm_nnid) מ**קונסולת המקור** אם אתם מעדיפים שהוא ישאר על **קונסולת היעד**
|
||||
1. תפעילו מחדש את **קונסולת המקור** בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את תפריט הטעינה של Luma3DS
|
||||
1. תפעילו את GodMode9 על ידי לחיצת (A)
|
||||
1. נווטו ל`[0:] SDCARD`
|
||||
1. תלחצו (A) על קובץ ה`.bin` של הNAND שלכם כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
|
||||
1. נווטו אל `[0:] SDCARD` ושם אל `gm9out`
|
||||
1. תלחצו (A) על `nand.bin` כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
|
||||
1. לחצו (A) כדי לפתוח גישת שכתוב לSysNAND, ואז תלחצו על המקשים בסדר הנכון
|
||||
+ זה לא ישכתב את התקנת boot9strap שלכם
|
||||
1. תלחצו על המקשים בסדר הנכון כדי לפתוח גישת כתיבה לSysNAND (בlvl1)
|
||||
|
|
@ -152,10 +152,9 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)"
|
|||
+ **The Legend of Zelda: Four Swords**: פשוט תפעילו את המשחק
|
||||
+ אם למשחק שלכם אין את השמירה הפרוצה מותקנת, [תעקבו אחרי המדריך הזה לפתרון בעיות](troubleshooting#ts_dsiware)
|
||||
1. תבחרו ב "Dump F0F1" כדי לגבות את הFIRM של **קונסולת היעד**
|
||||
1. שימו לב למקום גיבוי הFIRM
|
||||
1. תצאו מb9sTool
|
||||
+ אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
|
||||
1. תשימו את כרטיס הSD שלכם במחשב, ואז תעתיקו את `F0F1_N3DS.bin` או `F0F1_O3DS.bin` (תלוי במכשיר) למקום בטוח; תעשו גיבויים בכמה מקומות; זה ישמור עליכם מבריק אם משהו לא הולך כראוי
|
||||
1. תשימו את כרטיס הSD שלכם במחשב, ואז תעתיקו את `F0F1_N3DS.bin` או `F0F1_O3DS.bin` (תלוי במכשיר) מתיקיית `boot9strap` למקום בטוח; תעשו גיבויים בכמה מקומות; זה ישמור עליכם מבריק אם משהו לא הולך כראוי
|
||||
1. תכניסו מחדש את כרטיס הSD שלכם אל **קונסולת היעד**
|
||||
|
||||
##### חלק VI - התקנת הFIRM הפרוץ על קונסולת היעד
|
||||
|
|
|
|||
|
|
@ -123,6 +123,26 @@ title: "פתרון בעיות"
|
|||
1. אם אתם מגיעים למצב בטוח, תעדכנו את הקונסולה שלכם
|
||||
1. יש סיכוי שחטפתם בריק. לקבלת תמיכה, תבקשו עזרה ב[Nintendo Homebrew על Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />אחרי שעשיתי את מעבר הDSiWare, ה DSiWare הפרוץ לא עובד
|
||||
|
||||
1. תפעילו מחדש את **קונסולת המקור** בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את תפריט הטעינה של Luma3DS
|
||||
1. תפעילו את GodMode9 על ידי לחיצת (A)
|
||||
1. נווטו אל `[0:] SDCARD` ושם אל `gm9out`
|
||||
1. תלחצו (A) על `nand.bin` כדי לבחור בו, ואז תבחרו ב "NAND image options…", ושם ב "Restore SysNAND (safe)"
|
||||
1. לחצו (A) כדי לפתוח גישת שכתוב לSysNAND, ואז תלחצו על המקשים בסדר הנכון
|
||||
+ זה לא ישכתב את התקנת boot9strap שלכם
|
||||
1. תלחצו על המקשים בסדר הנכון כדי לפתוח גישת כתיבה לSysNAND (בlvl1)
|
||||
+ זה ייקח קצת זמן
|
||||
1. כאשר התהליך מסתיים, לחצו על (A) כדי להמשיך
|
||||
1. אם אתם לא רואים בכלל את המשחק על ה**3DS הלא פרוץ**, תחברו את הNNID שקניתם איתו את המשחק אל ה**3DS הלא פרוץ** ותורידו אותו
|
||||
+ אולי קודם תצטרכו למחוק את המשחק מ"Data Management" ב "System Settings"
|
||||
+ אם ה**3DS הלא פרוץ** לא מעודכן, אולי תצטרכו להריץ ctr-httpwn כדי להתחבר לאישופ
|
||||
1. על ה**3DS הפרוץ**, תעשו שוב את השלבים של הכנסת הsave (וה`.app` אם נדרש)
|
||||
1. על ה**3DS הפרוץ**, לכו להגדרות, "Data Management" ואז"DSiWare", ואז תעתיקו את המשחק DSiWare לSD
|
||||
1. או שתשימו את הSD של **ה3DS הפרוץ** ב **3DS הלא פרוץ**, או שתשנו את השם של תיקיית `Nintendo 3DS` על הSD של **ה3DS הלא פרוץ**ותעתיקו את תיקיית `Nintendo 3DS` מהSD של **ה3DS הפרוץ** אל הSD של **ה3DS הלא פרוץ**
|
||||
1. על ה**3DS הלא פרוץ**, לכו להגדרות, "Data Management" ואז"DSiWare", ואז תעתיקו את המשחק DSiWare למערכת
|
||||
1. תחזירו את הכרטיסי SD שלכם למצב שהיה ותמשיכו עם ההזרקת DSi
|
||||
|
||||
## <a name="ts_sys_b9s" />מסך שחור בהפעלת SysNAND אחרי התקנת boot9strap
|
||||
|
||||
1. תבדקו שיש לכם תוכנה עובדת.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Get Started" #
|
||||
cta_url: "get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Ensure you have a working payload.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ If this gives you an error, set your DNS settings to "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Get Started" #
|
||||
cta_url: "get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Ensure you have a working payload.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. Se la tua console ha la versione di sistema inferiore a 9.0.0, non si avvierà finché non userai una versione compatibile di Luma3DS:
|
||||
+ Scarica una [versione precedente di Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copia il file `boot.firm` nella directory principale della tua scheda SD *(sovrascrivendo eventualmente qualunque file già presente)*
|
||||
+ Sostituisci questo file `boot.firm` con quello dell'[ultima versione di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) dopo aver aggiornato la console seguendo le istruzioni riportate nelle sezioni successive
|
||||
1. Se la tua console è ad una versione del software compresa tra 3.0.0 e 4.5.0 (incluse), non si avvierà finché non avrai scaricato manualmente la versione del software richiesta:
|
||||
+ Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `native.firm`
|
||||
+ Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copia i file `native.firm` e `cetk` nella cartella `/luma/` della tua scheda SD
|
||||
+ Elimina entrambi i file dopo aver aggiornato la console nel relativo passaggio di questa sezione
|
||||
1. Reinserisci la scheda SD nel Nintendo 3DS
|
||||
1. Accendi la console
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
|
|||
+ Gli aggiornamenti effettuati usando B9S + Luma (ora installato) sono sicuri
|
||||
+ Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente
|
||||
+ Se continui ad ottenere un errore e la tua NAND è ad una versione precedente di 9.2.0, [segui la guida per il CTRTransfer 9.2.0](9.2.0-ctrtransfer), poi riprova ad aggiornare la console
|
||||
1. Se la tua console era ad una versione del sistema inferiore a 9.0.0 prima dell'aggiornamento, sostituisci il file `boot.firm` nella directory principale della tua scheda SD con quello dell'[ultima versione di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. Se la tua console era ad una versione del sistema compresa tra 3.0.0 e 4.5.0 prima dell'aggiornamento, elimina i file `native.firm` e `cetk` dalla cartella `/luma/` sulla tua scheda SD
|
||||
|
||||
##### Sezione III - Avviare FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "Guida" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Cominciamo!" #
|
||||
cta_url: "/it_IT/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
|
|||
+ Se il gioco presenta un errore riguardo dei dati danneggiati o inaccessibili, assicurati di aver copiato **il contenuto** della cartella `savedata` e non la cartella stessa
|
||||
+ Se il tuo gioco si comporta normalmente e non presenta alcun errore relativo a `boot.nds`, dovresti capire quali passi della guida non hai eseguito
|
||||
+ Se ottieni una schermata nera, [segui questa guida](troubleshooting#twl_broken)
|
||||
+ Se il gioco non è presente sul **3DS di destinazione** o presenta un errore riguardo dei dati danneggiati o inaccessibili, [segui questa guida per capire il problema](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Sezione III - Trasferimento dati
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
|
|||
+ Puoi anche semplicemente [rimuovere il NNID](https://3ds.guide/troubleshooting#rm_nnid) dal **3DS di partenza** se vuoi che rimanga sul **3DS di destinazione**
|
||||
1. Riavvia **il 3DS di partenza** tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
|
||||
1. Avvia GodMode9 premendo (A)
|
||||
1. Entra in `[0:] SDCARD`
|
||||
1. Premi (A) sul file `.bin` della NAND per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
|
||||
1. Entra nella cartella `[0:] SDCARD` -> `gm9out`
|
||||
1. Premi (A) su `nand.bin` per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
|
||||
1. Premi il pulsante (A) per sbloccare la sovrascrittura su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
|
||||
+ Questo processo non eliminerà boot9strap
|
||||
1. Inserisci la combinazione di tasti richiesta a schermo per sbloccare i permessi di scrittura di primo livello su SysNAND
|
||||
|
|
@ -139,12 +138,11 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
|
|||
1. Copia il file `.firm` della versione del software 11.4.0 corrispondente al **3DS di destinazione** nella cartella `boot9strap` nella directory principale della scheda SD del **3DS di destinazione**
|
||||
1. Copia il file `boot9strap.firm` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD
|
||||
1. Lancia b9sTool avviando il gioco DSiWare sul **3DS di destinazione**
|
||||
+ Se b9sTool non viene avviato al lancio del gioco, [segui questa guida](troubleshooting#ts_dsiware)
|
||||
+ Se il gioco dovesse essere assente o se b9sTool non dovesse avviarsi al lancio del gioco, [segui questa guida](troubleshooting#ts_dsiware)
|
||||
1. Seleziona "Dump F0F1" per salvare un backup del FIRM del **3DS di destinazione**
|
||||
1. Prendi nota della posizione del backup del FIRM
|
||||
1. Esci da b9sTool
|
||||
+ Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
|
||||
1. Metti la tua scheda SD nel tuo computer, quindi copia il file `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (a seconda della tua console) in una posizione sicura; crea più copie; questi file ti salveranno da un brick in caso qualcosa vada storto
|
||||
1. Inserisci la tua scheda SD nel computer, quindi copia il file `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (a seconda della tua console) dalla cartella `boot9strap` in una posizione sicura; crea dei backup in più posti; questi backup ti salveranno da un brick nel caso qualcosa dovesse andare storto
|
||||
1. Reinserisci la tua scheda SD nel **3DS di destinazione**
|
||||
|
||||
##### Sezione VI - Flash del FIRM sul 3DS di destinazione
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
|
|||
+ Puoi anche semplicemente [rimuovere il NNID](https://3ds.guide/troubleshooting#rm_nnid) dal **3DS di partenza** se vuoi che rimanga sul **3DS di destinazione**
|
||||
1. Riavvia **il 3DS di partenza** tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
|
||||
1. Avvia GodMode9 premendo (A)
|
||||
1. Entra in `[0:] SDCARD`
|
||||
1. Premi (A) sul file `.bin` della NAND per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
|
||||
1. Entra nella cartella `[0:] SDCARD` -> `gm9out`
|
||||
1. Premi (A) su `nand.bin` per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
|
||||
1. Premi il pulsante (A) per sbloccare la sovrascrittura su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
|
||||
+ Questo processo non eliminerà boot9strap
|
||||
1. Inserisci la combinazione di tasti richiesta a schermo per sbloccare i permessi di scrittura di primo livello su SysNAND
|
||||
|
|
@ -152,10 +152,9 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
|
|||
+ **The Legend of Zelda: Four Swords**: Avvia normalmente il gioco
|
||||
+ Se il gioco non presenta alcun salvataggio modificato installato, [segui questa guida per risolvere il problema](troubleshooting#ts_dsiware)
|
||||
1. Seleziona "Dump F0F1" per salvare un backup del FIRM del **3DS di destinazione**
|
||||
1. Prendi nota della posizione del backup del FIRM
|
||||
1. Esci da b9sTool
|
||||
+ Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
|
||||
1. Metti la tua scheda SD nel tuo computer, quindi copia il file `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (a seconda della tua console) in una posizione sicura; crea più copie; questi file ti salveranno da un brick in caso qualcosa vada storto
|
||||
1. Inserisci la tua scheda SD nel computer, quindi copia il file `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (a seconda della tua console) dalla cartella `boot9strap` in una posizione sicura; crea dei backup in più posti; questi backup ti salveranno da un brick nel caso qualcosa dovesse andare storto
|
||||
1. Reinserisci la tua scheda SD nel **3DS di destinazione**
|
||||
|
||||
##### Sezione VI - Flash del FIRM sul 3DS di destinazione
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Questo tipo di exploit (come browserhax o 2xrsa) è instabile e tende a crashare
|
|||
1. Se entri in modalità provvisoria, aggiorna la console
|
||||
1. La console potrebbe essere brickata. Se hai bisogno di aiuto, chiedi pure su [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) (in inglese)
|
||||
|
||||
## <a name="ts_dsiware" />Dopo aver eseguito il Trasferimento DSiWare, il mio DSiWare hackato non funziona
|
||||
|
||||
1. Riavvia **il 3DS di partenza** tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
|
||||
1. Avvia GodMode9 premendo (A)
|
||||
1. Entra nella cartella `[0:] SDCARD` -> `gm9out`
|
||||
1. Premi (A) su `nand.bin` per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
|
||||
1. Premi il pulsante (A) per sbloccare la sovrascrittura su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
|
||||
+ Questo processo non eliminerà boot9strap
|
||||
1. Inserisci la combinazione di tasti richiesta a schermo per sbloccare i permessi di scrittura di primo livello su SysNAND
|
||||
+ Questo processo durerà un po'
|
||||
1. Una volta completato, premi (A) per proseguire
|
||||
1. Se non vedi il gioco sul **3DS di destinazione**, collega il NNID con cui hai comprato il gioco al **3DS di destinazione** e riscaricalo
|
||||
+ Potresti dover prima eliminare il gioco da "Gestione dati" in "Impostazioni della console"
|
||||
+ Se il **3DS di destinazione** non ha l'ultima versione di sistema, potresti aver bisogno di avviare ctr-httpwn per accedere all'eShop
|
||||
1. Sul **3DS di partenza**, esegui la procedura di inject del salvataggio (e anche del file `.app` se stai seguendo la pagina relativa)
|
||||
1. Sul `3DS di partenza`, vai su Impostazioni della console, "Gestione dati", "DSiWare", quindi copia il tuo gioco DSiWare nella scheda SD
|
||||
1. Puoi o inserire la scheda SD del **3DS di partenza** nel **3DS di destinazione**, o rinominare la cartella `Nintendo 3DS` della scheda SD del **3DS di destinazione** e poi copiare la cartella `Nintendo 3DS` dalla scheda SD del **3DS di partenza** nella scheda SD del **3DS di destinazione**
|
||||
1. Nel **3DS di destinazione**, vai su Impostazioni della console, "Gestione dati", "DSiWare", quindi copia il tuo gioco DSiWare nella console
|
||||
1. Ripristina lo stato iniziale delle schede SD, quindi prosegui con l'Injection DSiWare
|
||||
|
||||
## <a name="ts_sys_b9s" />Schermo nero all'avvio della SysNAND dopo l'installazione di boot9strap
|
||||
|
||||
1. Assicurati che il payload funzioni.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)をダウンロードします
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ エラーが発生すれば、DNS設定を「自動」に変更してください
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Guide" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "はじめる" #
|
||||
cta_url: "/ja_JP/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. 機能しているペイロードを持っていることを確保します。
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)을 다운로드해 주세요.
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. SD 카드를 기기에 다시 삽입해 주세요.
|
||||
1. 기기를 시작해 주세요.
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ 오류가 발생한다면, DNS 설정을 "자동"으로 설정해 주세요.
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS 가이드" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "시작하기"
|
||||
cta_url: "/ko_KR/get-started" #
|
||||
|
|
|
|||
|
|
@ -95,7 +95,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -122,8 +121,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. (A)를 눌러 GodMode9을 실행해 주세요.
|
||||
1. `[0:] SDCARD`로 이동해 주세요.
|
||||
1. `NAND.bin`에 (A)를 눌러 선택하고 "NAND image options..."를 선택하고 "Restore SysNAND (safe)"를 선택해 주세요.
|
||||
1. `[0:] SDCARD` -> `gm9out`으로 이동해 주세요.
|
||||
1. `nand.bin`에 (A)를 눌러 선택하고 "NAND image options..."를 선택하고 "Restore SysNAND (safe)"를 선택해 주세요.
|
||||
1. (A)를 눌러 SysNAND 덮어쓰기 잠금을 풀고 주어진 키 조합을 입력해 주세요.
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. SysNAND (lvl1) 쓰기 잠금을 풀기 위해 주어진 키 조합을 입력해 주세요.
|
||||
|
|
@ -140,12 +139,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -128,8 +128,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. (A)를 눌러 GodMode9을 실행해 주세요.
|
||||
1. `[0:] SDCARD`로 이동해 주세요.
|
||||
1. `NAND.bin`에 (A)를 눌러 선택하고 "NAND image options..."를 선택하고 "Restore SysNAND (safe)"를 선택해 주세요.
|
||||
1. `[0:] SDCARD` -> `gm9out`으로 이동해 주세요.
|
||||
1. `nand.bin`에 (A)를 눌러 선택하고 "NAND image options..."를 선택하고 "Restore SysNAND (safe)"를 선택해 주세요.
|
||||
1. (A)를 눌러 SysNAND 덮어쓰기 잠금을 풀고 주어진 키 조합을 입력해 주세요.
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. SysNAND (lvl1) 쓰기 잠금을 풀기 위해 주어진 키 조합을 입력해 주세요.
|
||||
|
|
@ -153,10 +153,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -123,6 +123,26 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. (A)를 눌러 GodMode9을 실행해 주세요.
|
||||
1. `[0:] SDCARD` -> `gm9out`으로 이동해 주세요.
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. (A)를 눌러 SysNAND 덮어쓰기 잠금을 풀고 주어진 키 조합을 입력해 주세요.
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. SysNAND (lvl1) 쓰기 잠금을 풀기 위해 주어진 키 조합을 입력해 주세요.
|
||||
+ 이 과정은 시간이 좀 걸릴 것입니다.
|
||||
1. 작업이 완료되면 (A)를 눌려 계속해 주세요.
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. 작동하는 페이로드인지 확인해 주세요.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ Semasa proses ini, kami juga akan memasang program-program berikut:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Reinsert your SD card into your device
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ Jika terdapat error, set DNS settings anda ke "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "Panduan 3DS" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Bermula" #
|
||||
cta_url: "/ms_MY/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD`
|
||||
1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Exploitasi berdasarkan browser (seperti browserhax atau 2xrsa) kebiasaannya tida
|
|||
1. If you enter safe mode, update your device
|
||||
1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Launch GodMode9 by pressing (A)
|
||||
1. Navigate to `[0:] SDCARD` -> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Input the key combo given to unlock SysNAND (lvl1) writing
|
||||
+ This process will take some time
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Pastikan anda mempunyai payload yang berfungsi.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ Tijdens dit proces zullen we ook de volgende programma's installeren:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Stop je SD kaart terug in je 3DS
|
||||
1. Zet je 3DS aan
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Updates while using B9S + Luma (what you have) are safe
|
||||
+ Als dit je een foutmelding geeft, zet dan je DNS instellingen op "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ layout: splash
|
|||
title: "3DS Handleiding" #
|
||||
header:
|
||||
overlay_color: "#5e616c" #
|
||||
overlay_image: images/home-page-feature.jpg
|
||||
overlay_image: /images/home-page-feature.jpg
|
||||
overlay_filter: 0.5
|
||||
cta_label: "Begin" #
|
||||
cta_url: "/nl_NL/get-started" #
|
||||
|
|
|
|||
|
|
@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
|
||||
+ If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
|
||||
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
|
||||
+ If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
|
||||
##### Section III - System Transfer
|
||||
|
||||
|
|
@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Open GodMode9 door op (A) te drukken
|
||||
1. Navigeer naar `[0:] SDCARD`
|
||||
1. Druk op (A) op je `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)"
|
||||
1. Navigeer naar `[0:] SDCARD`-> `gm9out`
|
||||
1. Druk op (A) op `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)"
|
||||
1. Druk op (A) om SysNAND overwriting te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Voer de gegeven combinatie van knoppen in om SysNAND (lvl1) writing in te schakelen
|
||||
|
|
@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
|
||||
1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
||||
1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
|
||||
+ If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
+ If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Open GodMode9 door op (A) te drukken
|
||||
1. Navigeer naar `[0:] SDCARD`
|
||||
1. Druk op (A) op je `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)"
|
||||
1. Navigeer naar `[0:] SDCARD`-> `gm9out`
|
||||
1. Druk op (A) op `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)"
|
||||
1. Druk op (A) om SysNAND overwriting te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Voer de gegeven combinatie van knoppen in om SysNAND (lvl1) writing in te schakelen
|
||||
|
|
@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
|
|||
+ **The Legend of Zelda: Four Swords**: Just start the game
|
||||
+ If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
|
||||
1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
|
||||
1. Make note of the FIRM backup's location
|
||||
1. Exit b9sTool
|
||||
+ You may have to force power off by holding the power button
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
|
||||
1. Reinsert your SD card into **the target 3DS**
|
||||
|
||||
##### Section VI - Flashing the target 3DS's FIRM
|
||||
|
|
|
|||
|
|
@ -122,6 +122,26 @@ Op de browser gebaseerde exploits (zoals browserhax or 2xrsa) zijn vaak erg onst
|
|||
1. If you enter safe mode, update your device
|
||||
1. Je 3DS is misschien gebricked. Voor support, vraag om hulp op [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
|
||||
|
||||
## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
|
||||
|
||||
1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
|
||||
1. Open GodMode9 door op (A) te drukken
|
||||
1. Navigeer naar `[0:] SDCARD`-> `gm9out`
|
||||
1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
|
||||
1. Druk op (A) om SysNAND overwriting te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven
|
||||
+ This will not overwrite your boot9strap installation
|
||||
1. Voer de gegeven combinatie van knoppen in om SysNAND (lvl1) writing in te schakelen
|
||||
+ Dit proces zal enige tijd duren
|
||||
1. Once it has completed, press (A) to continue
|
||||
1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
|
||||
+ You may have to delete the game from "Data Management" in the "System Settings" first
|
||||
+ If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
|
||||
1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
|
||||
1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
|
||||
1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
|
||||
1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
|
||||
1. Return your SD cards to normal, then continue with the DSiWare Injection
|
||||
|
||||
## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
|
||||
|
||||
1. Zorg er voor dat je een werkende payload hebt.
|
||||
|
|
|
|||
|
|
@ -55,15 +55,6 @@ Under denne prossesen, vil vi også sette opp program som følgende:
|
|||
|
||||
{: .notice--info}
|
||||
|
||||
1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
|
||||
+ Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
|
||||
+ Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
|
||||
+ Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
|
||||
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
|
||||
+ Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
|
||||
+ Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
|
||||
+ Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
|
||||
+ Delete both of these files after updating your device later in these instructions
|
||||
1. Sett inn SD-kortet i konsollen igjen
|
||||
1. Power on your device
|
||||
|
||||
|
|
@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
+ Oppdateringer mens du bruker B9S + Luma (det du har) er trygt
|
||||
+ Hvis dette gir deg en feil, sett DNS-innstillingene til "auto"
|
||||
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
|
||||
1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
||||
1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
|
||||
|
||||
##### Section III - Launching FBI
|
||||
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue