formatting

This commit is contained in:
Plailect 2017-02-11 13:20:07 -05:00
parent cb4eebfdb7
commit 8858df9f7d
10 changed files with 19 additions and 0 deletions

View file

@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section.
8. Press (B) to decline installing tickets from CDN. 8. Press (B) to decline installing tickets from CDN.
9. Exit with the home button 9. Exit with the home button
___
Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794).
{: .notice--info} {: .notice--info}

View file

@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t
+ If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser)
5. If the exploit was successful, you will have booted into Decrypt9 5. If the exploit was successful, you will have booted into Decrypt9
___
Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer).
{: .notice--primary} {: .notice--primary}

View file

@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html
+ If it freezes, just force the console to power off by holding the power button, then try again + If it freezes, just force the console to power off by holding the power button, then try again
10. If the exploit was successful, you will have booted into Decrypt9 10. If the exploit was successful, you will have booted into Decrypt9
___
Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer)
{: .notice--primary} {: .notice--primary}

View file

@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t
8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile"
9. If the exploit was successful, you will have booted into Decrypt9 9. If the exploit was successful, you will have booted into Decrypt9
___
Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer).
{: .notice--primary} {: .notice--primary}

View file

@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes
Overwritten: 0.00 Byte (0 sectors) Overwritten: 0.00 Byte (0 sectors)
Average Reading speed: 9.42 MB/s Average Reading speed: 9.42 MB/s
___
If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card
{: .notice--success} {: .notice--success}

View file

@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw (
5. Press "Start Test" 5. Press "Start Test"
6. Wait until the process is complete. 6. Wait until the process is complete.
___
If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card
{: .notice--success} {: .notice--success}

View file

@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F
8. Click "Write + Verify" 8. Click "Write + Verify"
9. Wait until the process is completed 9. Wait until the process is completed
___
If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card
{: .notice--success} {: .notice--success}

View file

@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR,
+ If it freezes, just force the console to power off by holding the power button, then try again + If it freezes, just force the console to power off by holding the power button, then try again
8. Your console should load the Homebrew Launcher 8. Your console should load the Homebrew Launcher
___
Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher))
{: .notice--primary} {: .notice--primary}

View file

@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves!
23. Press (Start) to reboot! 23. Press (Start) to reboot!
24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) 24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down)
___
Return to [Installing arm9loaderhax](installing-arm9loaderhax). Return to [Installing arm9loaderhax](installing-arm9loaderhax).

View file

@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot
1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9
2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin"
___
Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon).
{: .notice--info} {: .notice--info}