-
-
-
-
-
-
-
-
-
-
- - - - - - -
- - - - -
- -
-
-
-
-
-
-
-
-
-
- BannerBomb3 + Fredtool (TWN) -
- - - -- - - - - - -
For support in English, ask for help at Nintendo Homebrew on Discord.
-
-
- If you appreciate this guide, we accept Donations.
-
-
- - - - - -
Required Reading
- -To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
- -To accomplish this, we use your system’s encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.
- -Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
- -These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.16.0-39T)! If your console is from any other region, choose the other method.
- -What you need
- --
-
- Your
movable.sedfile completing Seedminer
- - The latest release of Luma3DS (the Luma3DS
.zipfile)
- - The latest release of b9stool (direct download) -
- The latest release of Frogminer_save (
Frogminer_save.zip)
-
Section I - CFW Check
- -As an additional safety measure, we will perform an additional check for custom firmware. This is because using this method when custom firmware is already installed has a risk of bricking the console (rendering it unusable without recovery methods like ntrboot).
- --
-
- Power off your console -
- Hold the (Select) button -
- Power on your console while still holding the (Select) button -
- If the check was successful, you will boot to the HOME Menu and you may proceed with this guide -
- Power off your console -
If you see a configuration menu or the console immediately powers off, you already have CFW, and continuing with these instructions may BRICK your console! Follow Checking for CFW to upgrade your existing CFW.
- -Section II - Prep Work
- --
-
- Power off your console -
- Insert your SD card into your computer -
- Copy
boot.firmandboot.3dsxfrom the Luma3DS.zipto the root of your SD card --
-
- The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -
- - Copy
boot.nds(B9STool) from the release.zipto the root of your SD card
- - Copy the
privatefolder from the Frogminer_save.zipto the root of your SD card
- - Keep your SD card in your computer - there are more things to do in the next section -
Section III - BannerBomb3
- --
-
- Open the DSIHaxInjector V2 website on your computer -
- Under the “Username” field, enter any alphanumeric name (no spaces or special characters) -
- Under the “MovableSed” field, upload your
movable.sedusing the “Browse…” option
- - Click “Build”
-
-
-
- Wait a few seconds for the build process to complete -
- - In the Build History section on the left, type the Username into the “Filter Builds” field -
- Click on the first search result
-
-
-
- This result should have the latest timestamp -
- - Click the “output_(name).zip” link -
- Navigate to
Nintendo 3DS-><ID0>-><ID1>on your SD card - -
- - Create a folder named
Nintendo DSiWareinside of the<ID1>--
-
- If you already had the folder and there are any existing DSiWare backup files (
<8-character-id>.bin) inside, copy them to your computer and remove them from your SD card
-
- - If you already had the folder and there are any existing DSiWare backup files (
- Open the output_(name)
.zipfile and navigate toChina_Taiwan->output_setup
- - Copy all six
.binfiles to theNintendo DSiWarefolder
- - Reinsert your SD card into your console -
- Power on your console -
- Launch System Settings on your console -
- Navigate to
Data Management->DSiWare->SD Card-> (page 2)
- - Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6) -
- Power off your console -
- Insert your SD card into your computer -
- Navigate to
Nintendo 3DS-><ID0>-><ID1>->Nintendo DSiWareon your SD card
- - Open the output_(name)
.zipfile and navigate toChina_Taiwan->output_hax
- - Copy the
.binfile that is the same number as the one that was on the second page of the DSiWare Management menu to theNintendo DSiWarefolder, and overwrite when prompted
- - Power on your console -
- Launch System Settings on your console -
- Navigate to
Data Management->DSiWare->SD Card(image)
- - Wait a while
-
-
-
- The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the console showing an error message and rebooting -
- If you did not see the purple screen, then something went wrong -
- - You should now have the file
42383821.binon the root of your SD card
- - Navigate to
Nintendo 3DS-><ID0>-><ID1>->Nintendo DSiWareon your SD card
- - Delete all of the
.binfiles in theNintendo DSiWarefolder
-
Section IV - Fredtool
- --
-
- Open the DSIHaxInjector_new website on your computer -
- Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
-
-
-
- You might want to put in a different name to differentiate it from BannerBomb3’s output -
- - Under the “DSiBin” field, upload your
42383821.binfile using the first “Browse…” option
- - Under the “MovableSed” field, upload your
movable.sedfile using the second “Browse…” option
- - Under the “InjectionTarget” field, set the injection target to
DSdownloadplay(NOT memorypit)
- - Click “Build”
-
-
-
- Wait a few seconds for the build process to complete -
- - In the Build History section on the left, type the Username into the “Filter Builds” field -
- Click on the first search result
-
-
-
- This result should have the latest timestamp -
- - Click the “output_(name).zip” link -
- Navigate to
Nintendo 3DS-><ID0>-><ID1>->Nintendo DSiWareon your SD card
- - Copy the
484E4441.binfile from thehaxfolder of the downloaded DSiWare archive (output_(name).zip) to theNintendo DSiWarefolder
- - Reinsert your SD card into your console -
- Power on your console -
- Launch System Settings on your console -
- Navigate to
Data Management->DSiWare
- - Under the “SD Card” section, select the “Haxxxxxxxxx!” title -
- Select “Copy”, then select “OK” -
Section V - Flipnote Exploit
- -In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.
- -If you would prefer a visual guide to this section, one is available here.
- --
-
- Exit System Settings -
- Launch Download Play on your console (the orange icon with a 3DS on it) -
- Select “Nintendo DS” -
- If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio -
- Complete the initial setup process for the launched game until you reach the main menu
-
-
-
- Select the left option whenever prompted during the setup process -
- If you encounter an issue while doing this section, check this troubleshooting guide for your issue -
- - Using the touch-screen, select the large left box, then select the box with an SD card icon -
- Once the menu loads, select the face icon, then the bottom right icon to continue -
- Press (X) or (UP) on the D-Pad depending on which is shown on the top screen -
- Select the second button along the top with a film-reel icon -
- Scroll right until reel “3/3” is selected -
- Tap the third box with the letter “A” in it -
- Scroll left until reel “1/3” is selected -
- Tap the fourth box with the letter “A” in it -
- If the exploit was successful, your console will have loaded b9sTool -
Section VI - Installing boot9strap
- -In this section, you will install custom firmware onto your console.
- --
-
- Using the D-Pad, move to “Install boot9strap”
-
-
-
- If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to start over from the previous section -
- - Press (A), then press START and SELECT at the same time to begin the process -
- Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
-
-
-
- You may have to force power off by holding the power button -
- If your console shuts down when you try to power it on, ensure that you have copied
boot.firmfrom the Luma3DS.zipto the root of your SD card
- - If you see the Luma Configuration screen, power off your console and continue to the next section -
-
Section VII - Luma3DS Configuration
- --
-
- Press and hold (Select), and while holding (Select), power on your console -
- Your console should have booted into the Luma3DS configuration menu
-
-
-
- Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging -
- For the purpose of this guide, leave these options on the default settings (do not check or uncheck anything) -
- If your console shuts down when you try to power it on, ensure that you have copied
boot.firmfrom the Luma3DS.zipto the root of your SD card
-
- - Press (Start) to save and reboot -
Section VIII - Restoring DS Download Play
- --
-
- Navigate to
Nintendo 3DS-><ID0>-><ID1>->Nintendo DSiWareon your SD card
- - Copy the
484E4441.binfile from thecleanfolder of the downloaded DSiWare archive (output_(name).zip) to theNintendo DSiWarefolder
- - Reinsert your SD card into your console -
- Power on your console -
- Launch System Settings on your console -
- Navigate to
Data Management->DSiWare
- - Under the “SD Card” section, select the “Haxxxxxxxxx!” title -
- Select “Copy”, then select “OK” -
- Exit System Settings -
- Power off your console -
At this point, your console will boot to Luma3DS by default.
--
-
- Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. -
- On the next page, you will install useful homebrew applications to complete your setup. -
- -
)
- 
)
