New Crowdin translations (#1528)
This commit is contained in:
parent
ff82e524be
commit
8e9899a295
41 changed files with 67 additions and 67 deletions
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Stecke deine Flashkarte in deine Konsole
|
||||
1. Platziere den Magneten auf deiner Konsole um den Schlafmodus auszulösen
|
||||
+ Auf dem alten 2DS solltest du stattdessen den Schlafmodus-Schalter anmachen
|
||||
1. Halte (Powerknopf) + (Start) + (Select) + (X) für mehrere Sekunden gedrückt und lass sie danach wieder los
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ Es kann ein paar Versuche brauchen bis das funktioniert, da die Positionierung ungünstig ist
|
||||
1. Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ Para extraer los archivos `.7z` enlazados esta página, necesitarás un gestor d
|
|||
1. Inserta tu flashcart en tu consola
|
||||
1. Coloca el imán en tu consola para activar el sensor de modo de espera
|
||||
+ En la old 2DS, por otro lado, deberías activar el interruptor del modo de espera
|
||||
1. Mantén (Power) + (Start) + (Select) + (X) por varios segundos, luego suelta los botones
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ Podría tomar varios intentos para que esto funcione ya que la ubicación es algo rara
|
||||
1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ Purkaaksesi tämän osion `.7z`-tiedostot tarvitset pakkausohjelman, kuten [7-Zi
|
|||
1. Aseta flash-korttisi konsoliisi
|
||||
1. Aseta magneetti konsolin päälle aktivoidaksesi lepotilan anturin
|
||||
+ Jos käytät vanhaa 2DS:ää, aseta se lepotilaan kytkimellä
|
||||
1. Pidä pohjassa (POWER) + (START) + (SELECT) + (X) -painikeyhdistelmää useamman sekunnin ajan ja päästä ne sitten irti
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ Lepotilan aktivoiminen magneetilla saattaa vaatia useamman yrityksen, koska anturi on hankalassa paikassa
|
||||
1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ Pour extraire les fichiers `.7z` sur cette page, vous aurez besoin d'un programm
|
|||
1. Insérez votre linker dans votre console
|
||||
1. Placer l’aimant sur votre appareil pour déclencher le détecteur de sommeil
|
||||
+ Sur vieux 2DS, vous devez plutôt activer le commutateur de mode de sommeil
|
||||
1. Maintenez la touche (Power) + (Start) + (Select) + (X) pendant plusieurs secondes, puis relâchez les boutons
|
||||
1. Maintenez les boutons (Start) + (Select) + (X) + (Power) pendant plusieurs secondes, puis relâchez-les
|
||||
+ Cela nécessite peut-être plusieurs tentatives à cause d'un mauvais placement de l'aimant
|
||||
1. Si l'exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. תכניסו את כרטיס הפריצה שלכם לתוך הקונסולה שלכם
|
||||
1. שימו מגנט על הקונסולה כדי להפעיל את החיישן שינה
|
||||
+ על old 2DS, אתם צריכים במקום להפעיל את המתג של מצב השינה
|
||||
1. תחזיקו (Power) + (Start) + (Select) + (X) לכמה שניות, ואז תשחררו את הכפתורים
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ זה אולי יקח כמה נסיונות בגלל שהמיקום לא נוח
|
||||
1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ Ahhoz, hogy kicsomagold az oldalon található `.7z` fájlokat, egy fájl archiv
|
|||
1. Helyezd a flashkártyádat a készülékbe
|
||||
1. Helyezd a mágnest a készülékedre, hogy előidézd az alvó állapotot
|
||||
+ Old 2DS készülék esetében egyszerűen csak aktiváld az alvó üzemmódot a kapcsolóval
|
||||
1. Tartsd lenyomva a (Bekapcsológomb) + (Start) + (Select) + (X) kombinációt pár másodpercig, majd engedd fel őket
|
||||
1. Tartsd lenyomva a (Start) + (Select) + (X) + (Bekapcsológomb) kombinációt pár másodpercig, majd engedd fel őket
|
||||
+ Elképzelhető, hogy ez csak sokadjára sikerül csak a gombok elhelyezése miatt
|
||||
1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ Per estrarre i file `.7z` presenti in questa pagina, avrai bisogno di un gestore
|
|||
1. Inserisci la flashcart nella tua console
|
||||
1. Posiziona il magnete sulla console per attivare il sensore della modalità riposo
|
||||
+ Su Old 2DS, devi invece attivare la levetta della modalità riposo
|
||||
1. Tieni premuto i pulsanti (Accensione) + (Start) + (Select) + (X) per alcuni secondi, quindi rilascia i pulsanti
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ Data la complessita dell'operazione, potrebbero volerci più tentativi
|
||||
1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ Pentru a extrage fişierele `.7z` de pe această pagină, veţi avea nevoie de u
|
|||
1. Introduceţi flashcart-ul în dispozitiv
|
||||
1. Puneți magnetul pe dispozitiv pentru a declanșa senzorul de suspendare
|
||||
+ Pe Old 2DS, ar trebui să porniți modul de suspendare
|
||||
1. Țineți apăsat (Power) + (Start) + (Select) + (X) timp de câteva secunde, apoi dați drumul butoanelor
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ Ar putea lua câteva încercări ca să meargă din cauza că poziția este stranie
|
||||
1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ title: "Установка boot9strap (ntrboot)"
|
|||
1. Вставьте ваш флешкартридж в консоль
|
||||
1. Поместите магнит на место, где срабатывает датчик режима ожидания
|
||||
+ На консоли old 2DS вместо этого включите переключатель режима ожидания
|
||||
1. На несколько секунд зажмите кнопки (Power) + (Start) + (Select) + (X), затем отпустите
|
||||
1. На несколько секунд зажмите кнопки (Start) + (Select) + (X) + (Power), затем отпустите
|
||||
+ Может потребоваться несколько попыток, поскольку позиционирование неудобное
|
||||
1. Если эксплойт сработал, запустится SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -45,7 +45,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
|
|
@ -35,7 +35,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
|
|||
|
||||
#### Section I - Prep Work
|
||||
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. 将SD卡插入电脑
|
||||
1. Create a folder named `3ds` on the root of your SD card if it does not already exist
|
||||
1. Create a folder named `cias` on the root of your SD card if it does not already exist
|
||||
|
|
|
@ -106,7 +106,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
|
|||
|
||||
#### Section VI - CTRNAND Luma3DS
|
||||
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. Launch GodMode9 by holding (Start) during boot
|
||||
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
|
||||
1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue
|
||||
|
|
|
@ -22,7 +22,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
|
|||
|
||||
#### Section I - Prep Work
|
||||
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. Insert your flashcart's SD card into your computer
|
||||
1. Copy `ds_ntrboot_flasher_dsi.nds` to your flashcart's SD card
|
||||
1. Reinsert your flashcart's SD card back into your flashcart
|
||||
|
|
|
@ -26,9 +26,9 @@ Some of the instructions below are only applicable to the latest version of GodM
|
|||
|
||||
### 操作步骤
|
||||
|
||||
1. Power off your device
|
||||
1. 将你的 SD 卡插入到您的计算机
|
||||
1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
|
||||
1. 给设备关机
|
||||
1. 将SD卡插入电脑
|
||||
1. 从GodMode9的`.zip`中复制`GodMode9.firm`到SD卡的`/luma/payloads/`文件夹中
|
||||
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
@ -41,11 +41,11 @@ Some of the instructions below are only applicable to the latest version of GodM
|
|||
1. 按 (A) 确认
|
||||
+ This process will take some time
|
||||
1. Press (A) to continue
|
||||
1. 格式化完成后,同时按(R)键和(B)键,弹出你的SD卡
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. 将你的 SD 卡插入到您的计算机
|
||||
1. Copy `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
|
||||
+ Make backups in multiple locations (such as online file storage)
|
||||
+ 备份文件可以在将来出现错误时将你的机器救砖
|
||||
+ 该备份文件可以在以后你的设备出问题时用来救砖
|
||||
1. Delete `<date>_<serialnumber>_sysnand_###.bin` from the `/gm9/out/` folder on your SD card after copying it
|
||||
1. Reinsert your SD card into your device
|
||||
|
||||
|
@ -111,7 +111,7 @@ This will only work if the Health & Safety injection was performed by GodMode9 (
|
|||
1. Follow the steps applicable to your game cartridge:
|
||||
+ **3DS Game Cartridge:** Press (A) on `[TitleID].trim.3ds` to select it, then select "NCSD image options...", then select "Build CIA from file"
|
||||
+ **NDS Game Cartridge:** Press (A) on `[TitleID].trim.nds` to select it, then select "Copy to 0:/gm9/out"
|
||||
1. Your installable `.cia` or non-installable `.nds` formatted file will be outputted to the `/gm9/out/` folder on your SD card
|
||||
1. 导出的可安装的`.cia`及不可安装的`.nds`文件将会被保存在SD卡的`/gm9out/`文件夹中。
|
||||
|
||||
## Dumping a Title
|
||||
|
||||
|
@ -123,7 +123,7 @@ This will only work if the Health & Safety injection was performed by GodMode9 (
|
|||
1. Select "Search for titles"
|
||||
1. Press (A) to continue
|
||||
1. Press (A) on the `.tmd` file to select it, then select "TMD file options...", then select "Build CIA (standard)"
|
||||
1. Your installable `.cia` formatted file will be outputted to the `/gm9/out/` folder on your SD card
|
||||
1. 导出的可安装的`.cia`格式文件将会被保存在SD卡上的`/gm9/out/`文件夹中
|
||||
|
||||
## Converting a .3DS to .CIA
|
||||
|
||||
|
@ -137,7 +137,7 @@ This will only work if the Health & Safety injection was performed by GodMode9 (
|
|||
1. Launch GodMode9 by holding (Start) during boot
|
||||
1. Navigate to `[0:] SDCARD` -> `cias`
|
||||
1. Press (A) on your `.3ds` file to select it, then select "NCSD image options...", then select "Build CIA from file"
|
||||
1. Your installable `.cia` formatted file will be outputted to the `/gm9/out/` folder on your SD card
|
||||
1. 导出的可安装的`.cia`格式文件将会被保存在SD卡上的`/gm9/out/`文件夹中
|
||||
|
||||
## Backup GBA VC Saves
|
||||
|
||||
|
@ -189,10 +189,10 @@ To identify a `<TitleID>.gbavc.sav` file's Title ID, you can get a listing of al
|
|||
1. Launch GodMode9 by holding (Start) during boot
|
||||
1. Press (Home) to bring up the action menu
|
||||
1. Select "More..."
|
||||
1. 选择”SD format menu”
|
||||
1. Select "SD format menu"
|
||||
1. Select any EmuNAND options you wish to use
|
||||
+ Most users will want to select "No EmuNAND"
|
||||
1. 选择”Auto”
|
||||
1. Select "Auto"
|
||||
1. Press (A) to accept the label `GM9SD`
|
||||
+ Optionally, you may input a custom name for the SD card
|
||||
1. When prompted, input the key combo given to confirm
|
||||
|
@ -223,8 +223,8 @@ To identify a `<TitleID>.gbavc.sav` file's Title ID, you can get a listing of al
|
|||
### 操作步骤
|
||||
|
||||
1. Launch GodMode9 by holding (Start) during boot
|
||||
1. 格式化完成后,同时按(R)键和(B)键,弹出你的SD卡
|
||||
1. 将你的 SD 卡插入到您的计算机
|
||||
1. Hold (R) and press (B) at the same time to eject your SD card
|
||||
1. Insert your SD card into your computer
|
||||
1. Copy `remove_nnid.gm9` to the `/gm9/scripts/` folder on your SD card
|
||||
1. Reinsert your SD card into your device
|
||||
1. Press (Home) to bring up the action menu
|
||||
|
@ -234,4 +234,4 @@ To identify a `<TitleID>.gbavc.sav` file's Title ID, you can get a listing of al
|
|||
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
|
||||
1. Press (A) to continue
|
||||
1. Press (A) to relock write permissions
|
||||
1. 按(Start)重启你的设备
|
||||
1. Press (Start) to reboot your device
|
||||
|
|
|
@ -8,24 +8,24 @@ title: "H2testw (Windows)"
|
|||
|
||||
This is an add-on section for checking your SD card for errors using h2testw.
|
||||
|
||||
本节操作可能需要数小时的时间,取决于你的SD卡大小和你电脑的速度!
|
||||
根据你的SD卡大小和电脑的速度,该操作可能会花费数小时!
|
||||
|
||||
本节教程仅限Windows用户。 如果你的操作系统不是Windows,参见[F3X (mac)](f3x-(mac))或[F3 (Linux)](f3-(linux))页面
|
||||
本节教程仅限Windows用户。 如果你的操作系统不是Windows,请参见[F3X(mac)](f3x-(mac))或[F3(Linux)](f3-(linux))页面。
|
||||
|
||||
### What You Need
|
||||
|
||||
最新版本的[h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip)
|
||||
* 最新版本的[h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip)
|
||||
|
||||
### 操作步骤
|
||||
|
||||
1. 解压缩`h2testw`压缩包,复制`h2testw.exe`文件到桌面
|
||||
1. 将SD卡插入电脑
|
||||
1. Run `h2testw.exe`
|
||||
1. 选择”English”(译者注:如果有中文也可以选中文)
|
||||
1. 点击”Select target”(选择目标)
|
||||
1. 选择你SD卡对应的盘符
|
||||
1. 确保”all available space”(所有可用空间)已勾选
|
||||
1. 点击”Write + Verify”
|
||||
1. 选择“English”
|
||||
1. 点击“Select target”(选择目标)
|
||||
1. 选择SD卡对应的盘符
|
||||
1. 确保“all available space”(所有可用空间)已勾选
|
||||
1. 点击“Write + Verify”(写入并验证)
|
||||
1. 等待测试完成
|
||||
|
||||
___
|
||||
|
@ -33,7 +33,7 @@ ___
|
|||
If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on your SD card
|
||||
{: .notice--success}
|
||||
|
||||
如果测试结果为其它内容,你的SD卡可能已损坏,你可能得换一张了!
|
||||
如果不是,那么你的SD卡可能已损坏,请考虑换一个SD卡!
|
||||
{: .notice--danger}
|
||||
|
||||
### Return to [Get Started](get-started)
|
||||
|
|
|
@ -25,7 +25,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
|
||||
### 操作步骤
|
||||
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. Insert your SD card into your computer
|
||||
1. Create a folder named `3ds` on the root of your SD card if it does not already exist
|
||||
1. Copy `boot.3dsx` to the root of your SD card
|
||||
|
|
|
@ -60,7 +60,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
|
|||
|
||||
#### Section I - Prep Work
|
||||
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. 将你的 SD 卡插入到您的计算机
|
||||
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
|
||||
1. Copy `boot.3dsx` to the root of your SD card
|
||||
|
|
|
@ -23,7 +23,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
|
||||
#### Section I - Prep Work
|
||||
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. Insert your device's SD card into your computer
|
||||
+ This is the SD card from your 3DS, *not* the SD card from your flashcart
|
||||
1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
|
||||
|
@ -41,11 +41,11 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
|
|||
|
||||
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
|
||||
+ This step is not needed on the old 2DS (which has a sleep mode switch)
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. Insert your flashcart into your device
|
||||
1. Place the magnet on your device to trigger the sleep sensor
|
||||
+ On old 2DS, you should instead enable the sleep mode switch
|
||||
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||||
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
||||
|
||||
|
@ -121,7 +121,7 @@ Do not follow this section until you have completed the rest of the instructions
|
|||
|
||||
##### Instructions
|
||||
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. 将你的 SD 卡插入到您的计算机
|
||||
+ This is the SD card from your 3DS, *not* the SD card from your flashcart
|
||||
1. Create a folder named `ntrboot` on the root of your SD card
|
||||
|
|
|
@ -127,7 +127,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Power on your device
|
||||
1. When the home menu appears, reinsert your SD card into your device
|
||||
1. If this worked, you should clear Home Menu's extdata by following these instructions:
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. Launch GodMode9 by holding (Start) during boot
|
||||
1. Press (Home) to bring up the action menu
|
||||
1. Select "Scripts..."
|
||||
|
@ -140,7 +140,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. 尝试拔掉卡带(包括闪存卡带)开机
|
||||
1. If you have a hardmod and a NAND backup, flash the backup back to SysNAND
|
||||
1. Try booting into recovery mode and updating your system
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. Hold (L) + (R) + (A) + (Up)
|
||||
1. Power on your device
|
||||
1. If you enter safe mode, update your device
|
||||
|
@ -148,7 +148,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
|
||||
## Clear Home Menu extdata
|
||||
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. 将你的 SD 卡插入到您的计算机
|
||||
1. Navigate to the `/Nintendo 3DS/(32 Character ID)/(32 Character ID)/extdata/00000000/` folder on your SD card
|
||||
1. Delete the extdata file corresponding to your region:
|
||||
|
@ -176,7 +176,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
|
|||
1. Test booting GodMode9
|
||||
1. 在Luma3DS上,按住(Start)键开机
|
||||
1. 尝试删除桌面菜单的extdata
|
||||
1. Power off your device
|
||||
1. 给设备关机
|
||||
1. Launch GodMode9 by holding (Start) during boot
|
||||
1. Press (Home) to bring up the action menu
|
||||
1. Select "Scripts..."
|
||||
|
|
|
@ -45,7 +45,7 @@ title: "安裝 boot9strap (透過 ntrboot)"
|
|||
1. 將燒錄卡插回主機中
|
||||
1. 將磁鐵放在主機的睡眠感應器上
|
||||
+ 舊型 2DS 可直接開啟睡眠模式開關
|
||||
1. 按住『電源』鍵 +『Start』鍵 +『Select』鍵+『X』鍵個幾秒,並放開
|
||||
1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons
|
||||
+ 您可能得多試幾次,因為這組合有些難按
|
||||
1. 如果一切成功的話,您將自動進入 SafeB9SInstaller
|
||||
|
||||
|
|
Loading…
Reference in a new issue