streamline browserhax
streamline the FUCK out of it
This commit is contained in:
eip
parent
b122a01ff8
commit
966d4cf5d6
2 changed files with 15 additions and 15 deletions
|
|
@ -35,13 +35,18 @@ You can check these details from System Settings.
|
|||
|
||||
#### Section I - Prep Work
|
||||
|
||||
1. Power off your console and remove the SD card
|
||||
1. Connect the SD card to your computer
|
||||
1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
|
||||
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
|
||||
1. In the BrowserHax release archive, open the folder corresponding to your console's region and copy `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
|
||||
1. In the BrowserHax release archive, open the folder corresponding to your console's region
|
||||
1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
|
||||
+ You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
|
||||
|
||||
#### Section II - BrowserHax
|
||||
|
||||
1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
|
||||
1. Safely remove your SD card from your computer and put it back in your console
|
||||
1. Power on your console and ensure it is connected to an active WiFi network
|
||||
1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
|
||||
+ This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods)
|
||||
|
|
@ -52,7 +57,7 @@ You can check these details from System Settings.
|
|||
+ If it displays a yellow screen, power your console off, then try this section again
|
||||
1. If the exploit was successful, your device will have loaded the Homebrew Launcher
|
||||
+ You may see an error stating that no applications were found. If this occurs, proceed to the next steps
|
||||
1. Power off your console
|
||||
1. Leave your console on and proceed to the next section below
|
||||
|
||||
|
||||
___
|
||||
|
|
|
|||
|
|
@ -28,22 +28,17 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
|
|||
|
||||
#### Section I - Prep Work
|
||||
|
||||
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
|
||||
1. Create a folder named 3ds on the root of your SD card if it does not already exist
|
||||
1. From the slotTool folder from the unSAFE_MODE `.zip`, copy `slotTool.3dsx` to the `3ds` folder
|
||||
1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
|
||||
|
||||
#### Section II - slotTool
|
||||
|
||||
1. Power on your device
|
||||
1. Open the Homebrew Launcher through BrowserHax
|
||||
+ This may take a few tries
|
||||
1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
|
||||
1. Launch slotTool from the list of homebrew
|
||||
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
|
||||
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
|
||||
+ You will see some on-screen text and then your system will shut down
|
||||
1. Remove your SD card from your console and connect it to your computer
|
||||
1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
|
||||
1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
|
||||
1. Put your SD card back into your console
|
||||
|
||||
#### Section III - unSAFE_MODE
|
||||
#### Section II - unSAFE_MODE
|
||||
|
||||
1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
|
||||
+ Keep holding the buttons until the console boots into Safe Mode
|
||||
|
|
@ -56,7 +51,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
|
|||
+ Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
|
||||
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
|
||||
|
||||
#### Section IV - Configuring Luma3DS
|
||||
#### Section III - Configuring Luma3DS
|
||||
|
||||
1. Your device should automatically show the Luma Configuration menu
|
||||
1. Use the (A) button and the D-Pad to turn on the following:
|
||||
|
|
@ -64,7 +59,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
|
|||
1. Press (Start) to save and reboot
|
||||
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
||||
|
||||
#### Section V - Restoring WiFi Configuration Profiles
|
||||
#### Section IV - Restoring WiFi Configuration Profiles
|
||||
|
||||
1. Launch the Download Play application
|
||||
1. Wait until you see the two buttons
|
||||
|
|
|
|||
Loading…
Reference in a new issue