streamline browserhax

streamline the FUCK out of it
This commit is contained in:
eip 2020-09-08 23:11:23 +10:00
parent b122a01ff8
commit 966d4cf5d6
2 changed files with 15 additions and 15 deletions

View file

@ -35,13 +35,18 @@ You can check these details from System Settings.
#### Section I - Prep Work #### Section I - Prep Work
1. Power off your console and remove the SD card
1. Connect the SD card to your computer
1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card 1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
1. In the BrowserHax release archive, open the folder corresponding to your console's region and copy `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card 1. In the BrowserHax release archive, open the folder corresponding to your console's region
1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
#### Section II - BrowserHax #### Section II - BrowserHax
1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer 1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
1. Safely remove your SD card from your computer and put it back in your console
1. Power on your console and ensure it is connected to an active WiFi network 1. Power on your console and ensure it is connected to an active WiFi network
1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together 1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods)
@ -52,7 +57,7 @@ You can check these details from System Settings.
+ If it displays a yellow screen, power your console off, then try this section again + If it displays a yellow screen, power your console off, then try this section again
1. If the exploit was successful, your device will have loaded the Homebrew Launcher 1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ You may see an error stating that no applications were found. If this occurs, proceed to the next steps + You may see an error stating that no applications were found. If this occurs, proceed to the next steps
1. Power off your console 1. Leave your console on and proceed to the next section below
___ ___

View file

@ -28,22 +28,17 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work #### Section I - Prep Work
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files 1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
1. Create a folder named 3ds on the root of your SD card if it does not already exist
1. From the slotTool folder from the unSAFE_MODE `.zip`, copy `slotTool.3dsx` to the `3ds` folder
1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
#### Section II - slotTool
1. Power on your device
1. Open the Homebrew Launcher through BrowserHax
+ This may take a few tries
1. Launch slotTool from the list of homebrew 1. Launch slotTool from the list of homebrew
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option 1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ You will see some on-screen text and then your system will shut down + You will see some on-screen text and then your system will shut down
1. Remove your SD card from your console and connect it to your computer
1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
1. Put your SD card back into your console
#### Section III - unSAFE_MODE #### Section II - unSAFE_MODE
1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) 1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ Keep holding the buttons until the console boots into Safe Mode + Keep holding the buttons until the console boots into Safe Mode
@ -56,7 +51,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
+ Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
#### Section IV - Configuring Luma3DS #### Section III - Configuring Luma3DS
1. Your device should automatically show the Luma Configuration menu 1. Your device should automatically show the Luma Configuration menu
1. Use the (A) button and the D-Pad to turn on the following: 1. Use the (A) button and the D-Pad to turn on the following:
@ -64,7 +59,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
1. Press (Start) to save and reboot 1. Press (Start) to save and reboot
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
#### Section V - Restoring WiFi Configuration Profiles #### Section IV - Restoring WiFi Configuration Profiles
1. Launch the Download Play application 1. Launch the Download Play application
1. Wait until you see the two buttons 1. Wait until you see the two buttons