diff --git a/.github/ISSUE_TEMPLATE/console-issue.md b/.github/ISSUE_TEMPLATE/console-issue.md new file mode 100644 index 0000000000..bd46699877 --- /dev/null +++ b/.github/ISSUE_TEMPLATE/console-issue.md @@ -0,0 +1,20 @@ +--- +name: Console Issue +about: Some issue with your console after/during following the guide? +--- + +**System model** + + + +**Firmware version** + + + +**Luma3DS Version(If applicable)** + + + +**Guide Section(If applicable)** + + \ No newline at end of file diff --git a/.github/ISSUE_TEMPLATE/guide-issue.md b/.github/ISSUE_TEMPLATE/guide-issue.md new file mode 100644 index 0000000000..e267151ae1 --- /dev/null +++ b/.github/ISSUE_TEMPLATE/guide-issue.md @@ -0,0 +1,12 @@ +--- +name: Guide Issue +about: Did you find some issue with the guide? +--- + +**Pages with issue(s)** + + + +**Description of the issue(s)** + + diff --git a/.github/pull_request_template.md b/.github/pull_request_template.md new file mode 100644 index 0000000000..c606235a10 --- /dev/null +++ b/.github/pull_request_template.md @@ -0,0 +1,3 @@ +**Description** + + diff --git a/_config.yml b/_config.yml index 0658281abd..5cace1278c 100644 --- a/_config.yml +++ b/_config.yml @@ -11,12 +11,12 @@ minimal_mistakes_skin : "nord" locale : "en-US" title : "3DS Hacks Guide" title_separator : "-" -name : "Plailect" +name : "Nintendo Homebrew" description : "Full sighax CFW Guide" url : "https://3ds.hacks.guide" # the base hostname & protocol for your site e.g. "https://mmistakes.github.io" enforce_ssl : "3ds.hacks.guide" baseurl : # the subpath of your site, e.g. "/blog" -repository : "Plailect/Guide_3DS" # GitHub username/repo-name e.g. "mmistakes/minimal-mistakes" +repository : "hacks-guide/Guide_3DS" # GitHub username/repo-name e.g. "mmistakes/minimal-mistakes" teaser : # filename of teaser fallback teaser image placed in /images/, .e.g. "500x300.png" breadcrumbs : # true, false (default) words_per_minute : 200 @@ -80,11 +80,11 @@ analytics: # Site Author author: - name : "Plailect" - avatar : "bio-photo.png" - bio : "3DS Hacker" + name : "Nintendo Homebrew" + avatar : + bio : "Nintendo Homebrew Community" location : "Nullsec" - email : "Plailect@gmail.com" + email : uri : bitbucket : codepen : @@ -92,18 +92,18 @@ author: flickr : facebook : foursquare : - github : "Plailect" + github : "nh-server" google_plus : keybase : instagram : - lastfm : "Plailect" + lastfm : linkedin : pinterest : soundcloud : stackoverflow : # "123456/username" (the last part of your profile url, e.g. http://stackoverflow.com/users/123456/username) steam : tumblr : - twitter : "Plailect" + twitter : vine : weibo : xing : diff --git a/_data/navigation/ar_SA.yml b/_data/navigation/ar_SA.yml index 6355ebdf65..2f4ca56953 100644 --- a/_data/navigation/ar_SA.yml +++ b/_data/navigation/ar_SA.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Navigation - - - title: Why Ads? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ca_ES.yml b/_data/navigation/ca_ES.yml index c5ccf58b2d..2f4ca56953 100644 --- a/_data/navigation/ca_ES.yml +++ b/_data/navigation/ca_ES.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Navigation - - - title: Per què anuncis? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/cs_CZ.yml b/_data/navigation/cs_CZ.yml index 6355ebdf65..2f4ca56953 100644 --- a/_data/navigation/cs_CZ.yml +++ b/_data/navigation/cs_CZ.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Navigation - - - title: Why Ads? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/de_DE.yml b/_data/navigation/de_DE.yml index d6c2f2bcf0..648a4e1906 100644 --- a/_data/navigation/de_DE.yml +++ b/_data/navigation/de_DE.yml @@ -40,14 +40,12 @@ bottom: - title: Für Support auf Englisch, bitte um Hilfe auf dem Nintendo Homebrew Discord. - - title: Wenn du diese Anleitung hilfreich fandest, ich akzeptiere Spenden. + title: If you appreciate this guide, we accept Donations. footer: - title: Quellcode - title: Seitennavigation - - - title: Warum Werbung? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Erste Schritte url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/el_GR.yml b/_data/navigation/el_GR.yml index 01bab4da16..0d3d6d0644 100644 --- a/_data/navigation/el_GR.yml +++ b/_data/navigation/el_GR.yml @@ -40,16 +40,14 @@ bottom: - title: Για υποστήριξη στα αγγλικά, ζητήστε βοήθεια στο Nintendo Homebrew on Discord. - - title: Εάν σας βοήθησε αυτός ο οδηγός, μπορείτε να κάνετε μια Δωρεά. + title: If you appreciate this guide, we accept Donations. footer: - title: Κώδικας - title: Πλοήγηση Iστοτόπου - - title: Γιατί βλέπω διαφημίσεις; - - - title: Πολιτική Απορρήτου + title: Privacy Policy sidebar_title: - title: Συνολική πρόοδος @@ -61,7 +59,13 @@ sidebar_pages: title: Ας αρχίσουμε url: get-started - - title: Ενημέρωση μέσω Κασέτας + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) + - + title: Cart Update url: cart-update - title: ntrboot @@ -69,48 +73,33 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 - - title: Πολλαπλές επιλογές + title: Multiple Options url: multiple-options - - title: Φλασάρισμα ntrboot (για ένα σύστημα 3DS) + title: Flashing ntrboot (3DS Single System) url: flashing-ntrboot-(3ds-single-system) - - title: Φλασάρισμα ntrboot (περισσότερα απο ένα συστήματα 3DS) + title: Flashing ntrboot (3DS Multi System) url: flashing-ntrboot-(3ds-multi-system) - - title: Φλασάρισμα ntrboot (DSi) + title: Flashing ntrboot (DSi) url: flashing-ntrboot-(dsi) - - title: Φλασάρισμα ntrboot (NDS) + title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Φλασάρισμα ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/en_PT.yml b/_data/navigation/en_PT.yml index 2721e9ba15..0a2608d738 100644 --- a/_data/navigation/en_PT.yml +++ b/_data/navigation/en_PT.yml @@ -40,14 +40,12 @@ bottom: - title: Fer support in th' English 'o landlubbers, be askin' fer help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Treasure Map - - - title: Why Ads? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/en_US.yml b/_data/navigation/en_US.yml index c4219f75ef..d23fe30452 100644 --- a/_data/navigation/en_US.yml +++ b/_data/navigation/en_US.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Navigation - - - title: Why Ads? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/es_ES.yml b/_data/navigation/es_ES.yml index 4398adf41b..7c143bd7ae 100644 --- a/_data/navigation/es_ES.yml +++ b/_data/navigation/es_ES.yml @@ -40,16 +40,14 @@ bottom: - title: Para soporte en inglés, pide ayuda en el Discord de Nintendo Homebrew. - - title: Si aprecias esta guía, acepto donaciones. + title: If you appreciate this guide, we accept Donations. footer: - title: Código fuente - title: Navegación del sitio - - title: '¿Por qué anuncios?' - - - title: Política de privacidad + title: Privacy Policy sidebar_title: - title: Progreso total @@ -61,7 +59,13 @@ sidebar_pages: title: Comencemos url: get-started - - title: Actualizar con cartucho + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) + - + title: Cart Update url: cart-update - title: ntrboot @@ -69,81 +73,72 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 - - title: Múltiples opciones + title: Multiple Options url: multiple-options - - title: Flashear ntrboot (Una consola 3DS) + title: Flashing ntrboot (3DS Single System) url: flashing-ntrboot-(3ds-single-system) - - title: Flashear ntrboot (Dos consolas 3DS) + title: Flashing ntrboot (3DS Multi System) url: flashing-ntrboot-(3ds-multi-system) - - title: Flashear ntrboot (DSi) + title: Flashing ntrboot (DSi) url: flashing-ntrboot-(dsi) - - title: Flashear ntrboot (NDS) + title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashear ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - - title: Homebrew Launcher (Alternativas) + title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - title: NTR y Cubic Ninja - url: ntr-and-cubic-ninja - - - title: Instalar boot9strap (2xrsa) + title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) - - title: Instalar boot9strap (Navegador) + title: Installing boot9strap (Browser) url: installing-boot9strap-(browser) - - title: Instalar boot9strap (Hardmod) + title: Installing boot9strap (Hardmod) url: installing-boot9strap-(hardmod) - - title: Instalar boot9strap (SafeB9SInstaller) + title: Installing boot9strap (SafeB9SInstaller) url: installing-boot9strap-(safeb9sinstaller) - - title: Instalar boot9strap (MSET) + title: Installing boot9strap (MSET) url: installing-boot9strap-(mset) - - title: Instalar boot9strap (ntrboot) + title: Installing boot9strap (ntrboot) url: installing-boot9strap-(ntrboot) - - title: Instalar boot9strap (Soundhax) + title: Installing boot9strap (Soundhax) url: installing-boot9strap-(soundhax) - - title: Instalar boot9strap (Frogtool) + title: Installing boot9strap (Frogtool) url: installing-boot9strap-(frogtool) - - title: Instalar boot9strap (Fredtool) + title: Installing boot9strap (Fredtool) url: installing-boot9strap-(fredtool) - - title: Instalar boot9strap (USM) + title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Instalar boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) - - title: Finalizar instalación + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) + - + title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/fi_FI.yml b/_data/navigation/fi_FI.yml index 44b9a01241..8a5d22c788 100644 --- a/_data/navigation/fi_FI.yml +++ b/_data/navigation/fi_FI.yml @@ -40,14 +40,12 @@ bottom: - title: Englanninkielistä tukea saat Nintendo Homebrew -palvelimelta Discordissa. - - title: Jos arvostat tätä opasta, otan vastaan lahjoituksia. + title: If you appreciate this guide, we accept Donations. footer: - title: Lähdekoodi - title: Sivukartta - - - title: Miksi mainokset? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Aloitus url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/fr_FR.yml b/_data/navigation/fr_FR.yml index 6f26f2f1ea..8622bc8320 100644 --- a/_data/navigation/fr_FR.yml +++ b/_data/navigation/fr_FR.yml @@ -40,14 +40,12 @@ bottom: - title: Pour un support en Anglais, demander de l'aide sur le Discord Nintendo Homebrew. - - title: Si vous appréciez ce guide, j'accepte les Donations. + title: Si vous appréciez ce guide, nous acceptons les Dons. footer: - title: Source - title: Index du site - - - title: Pourquoi des pubs ? - title: Politique de confidentialité sidebar_title: @@ -61,7 +59,13 @@ sidebar_pages: title: Pour commencer url: get-started - - title: Mise à jour par cartouche + title: Bien démarrer (Old 3DS) + url: get-started-(old-3ds) + - + title: Bien démarrer (New 3DS) + url: get-started-(new-3ds) + - + title: Mise à jour par carte de jeu url: cart-update - title: ntrboot @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flash de ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flash de ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR et Cubic Ninja - url: ntr-and-cubic-ninja - title: Installation de boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installation de boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installation de boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installation de boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installation de boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installation de boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalisation de l'installation url: finalizing-setup diff --git a/_data/navigation/he_IL.yml b/_data/navigation/he_IL.yml index 7f423a62b6..68cb11cd3c 100644 --- a/_data/navigation/he_IL.yml +++ b/_data/navigation/he_IL.yml @@ -40,14 +40,12 @@ bottom: - title: לקבלת תמיכה באנגלית, תבקשו עזרה בNintendo Homebrew על Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: מקור - title: ניווט האתר - - - title: למה יש פרסומות? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: צעדים ראשונים url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/hr_HR.yml b/_data/navigation/hr_HR.yml index 6355ebdf65..2f4ca56953 100644 --- a/_data/navigation/hr_HR.yml +++ b/_data/navigation/hr_HR.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Navigation - - - title: Why Ads? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/hu_HU.yml b/_data/navigation/hu_HU.yml index d24c8a9471..0f80aeec50 100644 --- a/_data/navigation/hu_HU.yml +++ b/_data/navigation/hu_HU.yml @@ -35,21 +35,19 @@ main: url: uninstall-cfw top: - - title: This website uses cookies to display the current guide progress on the sidebar and otherwise enhance the site. + title: A weboldal "sütiket" használ, hogy nyomon tudd követni a haladásod az oldalsó menüben, és hogy jobbá tegye az oldalt. bottom: - title: Ha segítségre van szükséged (angol nyelven), keresd fel a Nintendo Homebrew-t Discord-on. - - title: Amennyiben hasznosnak véled ezt az útmutatót, elfogadok adományokat. + title: Amennyiben hasznosnak véled ezt az útmutatót, elfogadunk adományokat. footer: - title: Forráskód - title: Oldaltérkép - - title: Miért vannak hirdetések? - - - title: Privacy Policy + title: Adatvédelmi Irányelv sidebar_title: - title: Előrehaladás @@ -61,7 +59,13 @@ sidebar_pages: title: Kezdeti lépések url: get-started - - title: Cart Update + title: Kezdeti lépések (Old 3DS) + url: get-started-(old-3ds) + - + title: Kezdeti lépések (New 3DS) + url: get-started-(new-3ds) + - + title: Cart frissítés url: cart-update - title: ntrboot @@ -69,81 +73,72 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 - - title: Multiple Options + title: Több lehetőség url: multiple-options - - title: Flashing ntrboot (3DS Single System) + title: Ntrboot flashelése (egy 3DS rendszer) url: flashing-ntrboot-(3ds-single-system) - - title: Flashing ntrboot (3DS Multi System) + title: Ntrboot flashelése (több 3DS rendszer) url: flashing-ntrboot-(3ds-multi-system) - - title: Flashing ntrboot (DSi) + title: Ntrboot flashelése (DSi) url: flashing-ntrboot-(dsi) - - title: Flashing ntrboot (NDS) + title: Ntrboot flashelése (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - - title: Homebrew Launcher (Alternatives) + title: Homebrew Launcher (alternatívák) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - - - title: Installing boot9strap (2xrsa) + title: Boot9strap telepítése (2xrsa) url: installing-boot9strap-(2xrsa) - - title: Installing boot9strap (Browser) + title: Boot9strap telepítése (böngésző) url: installing-boot9strap-(browser) - - title: Installing boot9strap (Hardmod) + title: Boot9strap telepítése (Hardmod) url: installing-boot9strap-(hardmod) - - title: Installing boot9strap (SafeB9SInstaller) + title: Boot9strap telepítése (SafeB9SInstaller) url: installing-boot9strap-(safeb9sinstaller) - - title: Installing boot9strap (MSET) + title: Boot9strap telepítése (MSET) url: installing-boot9strap-(mset) - - title: Installing boot9strap (ntrboot) + title: Boot9strap (ntrboot) telepítése url: installing-boot9strap-(ntrboot) - - title: Installing boot9strap (Soundhax) + title: Boot9strap telepítése (Soundhax) url: installing-boot9strap-(soundhax) - - title: Installing boot9strap (Frogtool) + title: Boot9strap telepítése (Frogtool) url: installing-boot9strap-(frogtool) - - title: Installing boot9strap (Fredtool) + title: Boot9strap telepítése (Fredtool) url: installing-boot9strap-(fredtool) - - title: Installing boot9strap (USM) + title: Boot9strap telepítése (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Boot9strap telepítése (safecerthax) + url: installing-boot9strap-(safecerthax) - - title: Finalizing Setup + title: Boot9strap telepítése (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Boot9strap telepítése (PicHaxx) + url: installing-boot9strap-(pichaxx) + - + title: Telepítés véglegesítése url: finalizing-setup diff --git a/_data/navigation/id_ID.yml b/_data/navigation/id_ID.yml index 6355ebdf65..2f4ca56953 100644 --- a/_data/navigation/id_ID.yml +++ b/_data/navigation/id_ID.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Navigation - - - title: Why Ads? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/it_IT.yml b/_data/navigation/it_IT.yml index 8eff4ffe37..886ada50aa 100644 --- a/_data/navigation/it_IT.yml +++ b/_data/navigation/it_IT.yml @@ -40,14 +40,12 @@ bottom: - title: Se hai bisogno di aiuto, chiedi pure su Nintendo Homebrew su Discord (in inglese). - - title: Se hai gradito questa guida, accetto donazioni. + title: Se hai gradito questa guida, accettiamo donazioni. footer: - title: Codice Sorgente - title: Mappa del sito - - - title: Perché c'è la pubblicità? - title: Informativa sulla Privacy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Cominciamo! url: get-started + - + title: Cominciamo! (Old 3DS) + url: get-started-(old-3ds) + - + title: Cominciamo! (New 3DS) + url: get-started-(new-3ds) - title: Aggiornamento con Scheda di Gioco url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flash di ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flash di ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternative) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR e Cubic Ninja - url: ntr-and-cubic-ninja - title: Installazione di boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installazione di boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installazione di boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installazione di boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) - - title: Completamento dell'installazione + title: Installazione di boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installazione di boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) + - + title: Completamento dell'Installazione url: finalizing-setup diff --git a/_data/navigation/ja_JP.yml b/_data/navigation/ja_JP.yml index 737138421b..f84d2511ce 100644 --- a/_data/navigation/ja_JP.yml +++ b/_data/navigation/ja_JP.yml @@ -1,65 +1,69 @@ --- main: - - title: Home + title: ホーム url: / - title: よくある質問 url: faq - - title: Donations + title: 寄付 url: donations - - title: Credits + title: クレジット url: credits - - title: Updating B9S + title: B9Sのアップデート url: updating-b9s - - title: A9LH to B9S + title: A9LHからB9Sへ url: a9lh-to-b9s - - title: Troubleshooting + title: トラブルシューティング url: troubleshooting - - title: Region Changing + title: リージョンの変更 url: region-changing - - title: GodMode9 Usage + title: GodMode9の使い方 url: godmode9-usage - - title: サイトナビ + title: サイトナビゲーション url: site-navigation - - title: Uninstall CFW + title: CFWをアンインストールする url: uninstall-cfw top: - - title: This website uses cookies to display the current guide progress on the sidebar and otherwise enhance the site. + title: このWebサイトでは、サイドバーに現在のガイドの進捗状況を表示するなどの目的でcookieを使用しています。 bottom: - - title: For support in English, ask for help at Nintendo Homebrew on Discord. + title: 英語によるサポートについては、 Nintendo Homebrew on Discord のヘルプをご覧ください。 - - title: If you appreciate this guide, I accept Donations. + title: もしこのガイドがあなたのお役に立ったのであれば、私に寄付して頂けると幸いです。 footer: - title: ソースコード - title: サイトナビ - - title: なぜ広告が必要なの? - - - title: Privacy Policy + title: プライバシーポリシー sidebar_title: - - title: Overall Progress + title: 全体の進捗状況 sidebar_pages: - - title: Home + title: ホーム url: / - - title: Get Started + title: はじめに url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ko_KR.yml b/_data/navigation/ko_KR.yml index cfb07becd9..4b7ecf05f2 100644 --- a/_data/navigation/ko_KR.yml +++ b/_data/navigation/ko_KR.yml @@ -40,14 +40,12 @@ bottom: - title: 영어로 지원을 요청하고 싶으시면 Nintendo Homebrew on Discord에 도움을 요청해 주세요. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: 소스 코드 - title: 사이트 탐색 - - - title: 왜 광고가 있나요? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ms_MY.yml b/_data/navigation/ms_MY.yml index 1212a26b1d..d72099c1ce 100644 --- a/_data/navigation/ms_MY.yml +++ b/_data/navigation/ms_MY.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Sumber - title: Navigasi Halaman - - - title: Kenapa iklan? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/nl_NL.yml b/_data/navigation/nl_NL.yml index 0d610a81b3..12e5a86d4b 100644 --- a/_data/navigation/nl_NL.yml +++ b/_data/navigation/nl_NL.yml @@ -40,14 +40,12 @@ bottom: - title: Voor Engelse support kan je voor hulp vragen in Nintendo Homebrew op Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Broncode - title: Site Navigatie - - - title: Waarom Advertenties? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/no_NO.yml b/_data/navigation/no_NO.yml index fdebcc56bc..b06fef767a 100644 --- a/_data/navigation/no_NO.yml +++ b/_data/navigation/no_NO.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Kilde - title: Sidenavigering - - - title: Hvorfor annonser? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/pl_PL.yml b/_data/navigation/pl_PL.yml index 3d0225aaeb..53bea5c02a 100644 --- a/_data/navigation/pl_PL.yml +++ b/_data/navigation/pl_PL.yml @@ -40,14 +40,12 @@ bottom: - title: Aby uzyskać wsparcie w języku angielskim, wejdź na Serwer Nintendo Homebrew na Discordzie. - - title: Jeśli cenisz sobie ten poradnik, akceptuję Darowizny. + title: If you appreciate this guide, we accept Donations. footer: - title: Źródło - title: Nawigacja Po Stronie - - - title: Dlaczego Reklamy? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Wprowadzenie url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/pt_BR.yml b/_data/navigation/pt_BR.yml index 9c00299296..8c0086c9f0 100644 --- a/_data/navigation/pt_BR.yml +++ b/_data/navigation/pt_BR.yml @@ -40,14 +40,12 @@ bottom: - title: Para suporte em Inglês, peça ajuda em Nintendo Homebrew no Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Fonte - title: Navegação do Site - - - title: Por que anúncios? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/pt_PT.yml b/_data/navigation/pt_PT.yml index 027b929276..859ecbf130 100644 --- a/_data/navigation/pt_PT.yml +++ b/_data/navigation/pt_PT.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Código-fonte - title: Navegação do Site - - - title: Porquê anúncios? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ro_RO.yml b/_data/navigation/ro_RO.yml index d01baf195e..878c1fddb0 100644 --- a/_data/navigation/ro_RO.yml +++ b/_data/navigation/ro_RO.yml @@ -40,16 +40,14 @@ bottom: - title: Pentru suport în engleză, cereți ajutor la Nintendo Homebrew pe Discord. - - title: Dacă apreciați acest ghid, accept Donații. + title: If you appreciate this guide, we accept Donations. footer: - title: Codul sursă - title: Navigarea pe site - - title: De ce sunt reclame? - - - title: Politica de confidenţialitate + title: Privacy Policy sidebar_title: - title: Progres total @@ -61,7 +59,13 @@ sidebar_pages: title: Începeți (New 3DS) url: get-started - - title: Actualizare cu card de joc + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) + - + title: Cart Update url: cart-update - title: ntrboot @@ -69,48 +73,33 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 - - title: Mai multe opţiuni + title: Multiple Options url: multiple-options - - title: Instalând ntrboot (Un 3DS) + title: Flashing ntrboot (3DS Single System) url: flashing-ntrboot-(3ds-single-system) - - title: Instalând ntrboot (Două 3DS-uri) + title: Flashing ntrboot (3DS Multi System) url: flashing-ntrboot-(3ds-multi-system) - - title: Homebrew Launcher (Soundhax) + title: Flashing ntrboot (DSi) url: flashing-ntrboot-(dsi) - - title: Instalând ntrboot (NDS) + title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Instalând ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/ru_RU.yml b/_data/navigation/ru_RU.yml index 26c570f2ca..310a946c77 100644 --- a/_data/navigation/ru_RU.yml +++ b/_data/navigation/ru_RU.yml @@ -40,16 +40,14 @@ bottom: - title: Для поддержки на английском языке обратитесь за помощью сюда Nintendo Homebrew on Discord. - - title: Если вам помогло или просто понравилось это руководство, то я принимаю пожертвования. + title: If you appreciate this guide, we accept Donations. footer: - title: Исходный код - title: Навигация по сайту - - title: Зачем реклама? - - - title: Политика конфиденциальности + title: Privacy Policy sidebar_title: - title: Общий прогресс @@ -61,7 +59,13 @@ sidebar_pages: title: Начало url: get-started - - title: Обновление картриджем + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) + - + title: Cart Update url: cart-update - title: ntrboot @@ -69,48 +73,33 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 - - title: Несколько вариантов + title: Multiple Options url: multiple-options - - title: Прошивка ntrboot (Одна консоль 3DS) + title: Flashing ntrboot (3DS Single System) url: flashing-ntrboot-(3ds-single-system) - - title: Прошивка ntrboot (Две консоли 3DS) + title: Flashing ntrboot (3DS Multi System) url: flashing-ntrboot-(3ds-multi-system) - - title: Прошивка ntrboot (DSi) + title: Flashing ntrboot (DSi) url: flashing-ntrboot-(dsi) - - title: Прошивка ntrboot (NDS) + title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Прошивка ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/sv_SE.yml b/_data/navigation/sv_SE.yml index 37b5790169..38c824d00b 100644 --- a/_data/navigation/sv_SE.yml +++ b/_data/navigation/sv_SE.yml @@ -40,14 +40,12 @@ bottom: - title: För support på engelska, be om hjälp av Nintendo Homebrew på Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Källa - title: Navigering på webbplatsen - - - title: Varför annonser? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Kom Igång url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/th_TH.yml b/_data/navigation/th_TH.yml index 6355ebdf65..2f4ca56953 100644 --- a/_data/navigation/th_TH.yml +++ b/_data/navigation/th_TH.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Navigation - - - title: Why Ads? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/tr_TR.yml b/_data/navigation/tr_TR.yml index 42159c4042..3bab80c57c 100644 --- a/_data/navigation/tr_TR.yml +++ b/_data/navigation/tr_TR.yml @@ -40,14 +40,12 @@ bottom: - title: İngilizce destek için Nintendo Homebrew üzerinde , yardım isteyin. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Kaynak - title: Site Kılavuzu - - - title: Neden Reklam Var? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/uk_UA.yml b/_data/navigation/uk_UA.yml index 6355ebdf65..2f4ca56953 100644 --- a/_data/navigation/uk_UA.yml +++ b/_data/navigation/uk_UA.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Source - title: Site Navigation - - - title: Why Ads? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/vi_VN.yml b/_data/navigation/vi_VN.yml index 8bd4c9478d..b75f350023 100644 --- a/_data/navigation/vi_VN.yml +++ b/_data/navigation/vi_VN.yml @@ -40,14 +40,12 @@ bottom: - title: For support in English, ask for help at Nintendo Homebrew on Discord. - - title: If you appreciate this guide, I accept Donations. + title: If you appreciate this guide, we accept Donations. footer: - title: Nguồn - title: Site Navigation - - - title: Tại sao có quảng cáo? - title: Privacy Policy sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: Get Started url: get-started + - + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) - title: Cart Update url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -90,27 +91,15 @@ sidebar_pages: - title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: Flashing ntrboot (Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_data/navigation/zh_CN.yml b/_data/navigation/zh_CN.yml index 8f712e471d..3a30246cec 100644 --- a/_data/navigation/zh_CN.yml +++ b/_data/navigation/zh_CN.yml @@ -38,16 +38,14 @@ top: title: 本网站利用cookies在侧边栏上显示当前的操作进度并改善此站点的使用体验。 bottom: - - title: "如果有疑问并且懂英语的话，可以到Nintendo Homebrew Discord服务器上使用英文寻求帮助。(请注意，如果你身处中国大陆，你可能需要通过科学上网来访问Discord)\n你也可以到译者的QQ群寻求帮助，群号为942052497。" + title: "如果有疑问并且懂英语的话，可以到 Nintendo Homebrew Discord 服务器上使用英文寻求帮助。（请注意，如果你身处中国大陆，你可能需要通过科学上网来访问 Discord）\n你也可以到译者的 QQ 群寻求帮助，群号为 942052497。" - - title: 如果你喜欢这个教程，可以通过捐款支持我。 + title: 如果你喜欢这个教程，可以通过捐赠支持我们。 footer: - title: 本站源码 - title: 网站导航 - - - title: 为什么有广告？ - title: 隐私政策 sidebar_title: @@ -60,6 +58,12 @@ sidebar_pages: - title: 开始 url: get-started + - + title: 新手入门（旧版 3DS） + url: get-started-(old-3ds) + - + title: 新手入门（New 3DS） + url: get-started-(new-3ds) - title: 卡带更新 url: cart-update @@ -69,9 +73,6 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 @@ -79,49 +80,37 @@ sidebar_pages: title: 多个选项 url: multiple-options - - title: 写入 ntrboot 漏洞 （使用单台 3DS） + title: 写入 ntrboot 漏洞（使用单台 3DS） url: flashing-ntrboot-(3ds-single-system) - title: 写入 ntrboot 漏洞（使用多台 3DS） url: flashing-ntrboot-(3ds-multi-system) - - title: 写入 ntrboot 漏洞 （通过一台 DSi） + title: 写入 ntrboot 漏洞（通过一台 DSi） url: flashing-ntrboot-(dsi) - title: 写入ntrboot（通过一台 NDS) url: flashing-ntrboot-(nds) - - title: 写入 ntrboot 漏洞 （通过 Powersaves） - url: flashing-ntrboot-(powersaves) - - - title: 浏览器破解 2020 - url: homebrew-launcher-(browserhax-2020) - - - title: Homebrew Launcher（通过 Soundhax） + title: 启动 Homebrew Launcher（通过 Soundhax） url: homebrew-launcher-(soundhax) - title: 启动 Homebrew Launcher（通过其他方法） url: homebrew-launcher-(alternatives) - - - title: 启动 Homebrew Launcher（通过 Steelhax） - url: homebrew-launcher-(steelhax) - title: 启动 Homebrew Launcher（通过 PicHaxx） url: homebrew-launcher-(pichaxx) - - - title: NTR 与立体忍者 - url: ntr-and-cubic-ninja - title: 安装 boot9strap（通过 2xrsa） url: installing-boot9strap-(2xrsa) - - title: 安装 boot9strap （通过网页浏览器） + title: 安装 boot9strap（通过网页浏览器） url: installing-boot9strap-(browser) - - title: 安装 boot9strap （通过硬改） + title: 安装 boot9strap（通过硬改） url: installing-boot9strap-(hardmod) - - title: 安装 boot9strap（通过SafeB9SInstaller） + title: 安装 boot9strap（通过 SafeB9SInstaller） url: installing-boot9strap-(safeb9sinstaller) - title: 安装 boot9strap（通过 MSET） @@ -130,7 +119,7 @@ sidebar_pages: title: 安装 boot9strap（通过 ntrboot） url: installing-boot9strap-(ntrboot) - - title: 安装 boot9strap （通过 Soundhax） + title: 安装 boot9strap（通过 Soundhax） url: installing-boot9strap-(soundhax) - title: 安装 boot9strap（通过 Frogtool） @@ -139,11 +128,17 @@ sidebar_pages: title: 安装 boot9strap（通过 Fredtool） url: installing-boot9strap-(fredtool) - - title: 安装 boot9strap（通过 USM） + title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: 安装 boot9strap（通过 HBL-USM） - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: 完成安装 url: finalizing-setup diff --git a/_data/navigation/zh_TW.yml b/_data/navigation/zh_TW.yml index 48316719ec..a13a653225 100644 --- a/_data/navigation/zh_TW.yml +++ b/_data/navigation/zh_TW.yml @@ -40,16 +40,14 @@ bottom: - title: 若需英語支援，請於 Discord 上的 Nintendo Homebrew 伺服器發問。 - - title: 如果您喜歡本教學，我很樂意接受捐贈。 + title: If you appreciate this guide, we accept Donations. footer: - title: 本站原始碼 - title: 網站導覽 - - title: 為什麼會有廣告? - - - title: 隱私權政策 + title: Privacy Policy sidebar_title: - title: 整體進度 @@ -61,7 +59,13 @@ sidebar_pages: title: 新手入門 (New 3DS) url: get-started - - title: 卡帶更新 + title: Get Started (Old 3DS) + url: get-started-(old-3ds) + - + title: Get Started (New 3DS) + url: get-started-(new-3ds) + - + title: Cart Update url: cart-update - title: ntrboot @@ -69,48 +73,33 @@ sidebar_pages: - title: Seedminer url: seedminer - - - title: DSiDumper - url: dsidumper - title: BannerBomb3 url: bannerbomb3 - - title: 多項選擇 + title: Multiple Options url: multiple-options - - title: 寫入 ntrboot 漏洞 (透過單台 3DS 系統) + title: Flashing ntrboot (3DS Single System) url: flashing-ntrboot-(3ds-single-system) - - title: 寫入 ntrboot 漏洞 (透過多台 3DS 系統) + title: Flashing ntrboot (3DS Multi System) url: flashing-ntrboot-(3ds-multi-system) - - title: 寫入 ntrboot 漏洞 (透過 DSi) + title: Flashing ntrboot (DSi) url: flashing-ntrboot-(dsi) - - title: 寫入 ntrboot 漏洞 (透過 NDS) + title: Flashing ntrboot (NDS) url: flashing-ntrboot-(nds) - - - title: 寫入 ntrboot 漏洞 (透過 Powersaves) - url: flashing-ntrboot-(powersaves) - - - title: BrowserHax 2020 - url: homebrew-launcher-(browserhax-2020) - title: Homebrew Launcher (Soundhax) url: homebrew-launcher-(soundhax) - title: Homebrew Launcher (Alternatives) url: homebrew-launcher-(alternatives) - - - title: Homebrew Launcher (Steelhax) - url: homebrew-launcher-(steelhax) - title: Homebrew Launcher (PicHaxx) url: homebrew-launcher-(pichaxx) - - - title: NTR and Cubic Ninja - url: ntr-and-cubic-ninja - title: Installing boot9strap (2xrsa) url: installing-boot9strap-(2xrsa) @@ -142,8 +131,14 @@ sidebar_pages: title: Installing boot9strap (USM) url: installing-boot9strap-(usm) - - title: Installing boot9strap (HBL-USM) - url: installing-boot9strap-(hbl-usm) + title: Installing boot9strap (safecerthax) + url: installing-boot9strap-(safecerthax) + - + title: Installing boot9strap (SSLoth-Browser) + url: installing-boot9strap-(ssloth-browser) + - + title: Installing boot9strap (PicHaxx) + url: installing-boot9strap-(pichaxx) - title: Finalizing Setup url: finalizing-setup diff --git a/_includes/footer.html b/_includes/footer.html index 972cd6333e..e5658cce42 100644 --- a/_includes/footer.html +++ b/_includes/footer.html @@ -2,4 +2,4 @@ {% assign split_path = page.path | split: "/" %} {% assign locale = split_path[1] %} {% assign titles = site.data.navigation[locale].footer %} -
© {{ site.time | date: '%Y' }} {{ site.name | default: site.title }} - {{ titles[0].title }} - {{ titles[1].title }} - {{ titles[3].title }}
+
© {{ site.time | date: '%Y' }} {{ site.name | default: site.title }} - {{ titles[0].title }} - {{ titles[1].title }} - {{ titles[3].title }}
diff --git a/_pages/ar_SA/a9lh-to-b9s.txt b/_pages/ar_SA/a9lh-to-b9s.txt index 60eaed476f..ec52109ad7 100644 --- a/_pages/ar_SA/a9lh-to-b9s.txt +++ b/_pages/ar_SA/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/ar_SA/bannerbomb3.txt b/_pages/ar_SA/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/ar_SA/bannerbomb3.txt +++ b/_pages/ar_SA/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/ar_SA/checking-for-cfw.txt b/_pages/ar_SA/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/ar_SA/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/ar_SA/credits.txt b/_pages/ar_SA/credits.txt index e66f591db9..c30986407b 100644 --- a/_pages/ar_SA/credits.txt +++ b/_pages/ar_SA/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/ar_SA/dsidumper.txt b/_pages/ar_SA/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/ar_SA/dsidumper.txt +++ b/_pages/ar_SA/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ar_SA/faq.txt b/_pages/ar_SA/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/ar_SA/faq.txt +++ b/_pages/ar_SA/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/ar_SA/finalizing-setup.txt b/_pages/ar_SA/finalizing-setup.txt index 90f49a797f..6f9a26a828 100644 --- a/_pages/ar_SA/finalizing-setup.txt +++ b/_pages/ar_SA/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt b/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/ar_SA/flashing-ntrboot-(nds).txt b/_pages/ar_SA/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/ar_SA/flashing-ntrboot-(nds).txt +++ b/_pages/ar_SA/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/ar_SA/formatting-sd-(linux).txt b/_pages/ar_SA/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/ar_SA/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/ar_SA/formatting-sd-(mac).txt b/_pages/ar_SA/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/ar_SA/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/ar_SA/formatting-sd-(windows).txt b/_pages/ar_SA/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/ar_SA/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/ar_SA/get-started-(new-3ds).txt b/_pages/ar_SA/get-started-(new-3ds).txt index a356bbb8ee..65bd5f0197 100644 --- a/_pages/ar_SA/get-started-(new-3ds).txt +++ b/_pages/ar_SA/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/ar_SA/get-started-(old-3ds).txt b/_pages/ar_SA/get-started-(old-3ds).txt index 8fc9ad47a9..2dbfd6b915 100644 --- a/_pages/ar_SA/get-started-(old-3ds).txt +++ b/_pages/ar_SA/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/ar_SA/get-started.txt b/_pages/ar_SA/get-started.txt index 824816730c..a7240e762e 100644 --- a/_pages/ar_SA/get-started.txt +++ b/_pages/ar_SA/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/ar_SA/godmode9-usage.txt b/_pages/ar_SA/godmode9-usage.txt index 99014ce114..cd139f0548 100644 --- a/_pages/ar_SA/godmode9-usage.txt +++ b/_pages/ar_SA/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/ar_SA/home.txt b/_pages/ar_SA/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/ar_SA/home.txt +++ b/_pages/ar_SA/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/ar_SA/homebrew-launcher-(browserhax-2020).txt b/_pages/ar_SA/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/ar_SA/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ar_SA/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ar_SA/homebrew-launcher-(pichaxx).txt b/_pages/ar_SA/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/ar_SA/homebrew-launcher-(pichaxx).txt +++ b/_pages/ar_SA/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/ar_SA/homebrew-launcher-(soundhax).txt b/_pages/ar_SA/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/ar_SA/homebrew-launcher-(soundhax).txt +++ b/_pages/ar_SA/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/ar_SA/homebrew-launcher-(steelhax).txt b/_pages/ar_SA/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/ar_SA/homebrew-launcher-(steelhax).txt +++ b/_pages/ar_SA/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/ar_SA/installing-boot9strap-(browser).txt b/_pages/ar_SA/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/ar_SA/installing-boot9strap-(browser).txt +++ b/_pages/ar_SA/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/ar_SA/installing-boot9strap-(fredtool).txt b/_pages/ar_SA/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/ar_SA/installing-boot9strap-(fredtool).txt +++ b/_pages/ar_SA/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/ar_SA/installing-boot9strap-(frogtool).txt b/_pages/ar_SA/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/ar_SA/installing-boot9strap-(frogtool).txt +++ b/_pages/ar_SA/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/ar_SA/installing-boot9strap-(hardmod).txt b/_pages/ar_SA/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/ar_SA/installing-boot9strap-(hardmod).txt +++ b/_pages/ar_SA/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt b/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ar_SA/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt +++ b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/ar_SA/installing-boot9strap-(pichaxx).txt b/_pages/ar_SA/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/ar_SA/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ar_SA/installing-boot9strap-(safecerthax).txt b/_pages/ar_SA/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/ar_SA/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ar_SA/installing-boot9strap-(soundhax).txt b/_pages/ar_SA/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/ar_SA/installing-boot9strap-(soundhax).txt +++ b/_pages/ar_SA/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ar_SA/installing-boot9strap-(ssloth-browser).txt b/_pages/ar_SA/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/ar_SA/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/ar_SA/installing-boot9strap-(usm).txt b/_pages/ar_SA/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/ar_SA/installing-boot9strap-(usm).txt +++ b/_pages/ar_SA/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/ar_SA/legacy-methods.txt b/_pages/ar_SA/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/ar_SA/legacy-methods.txt +++ b/_pages/ar_SA/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/ar_SA/ntrboot.txt b/_pages/ar_SA/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/ar_SA/ntrboot.txt +++ b/_pages/ar_SA/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ar_SA/region-changing.txt b/_pages/ar_SA/region-changing.txt index 75af6091cf..595af43745 100644 --- a/_pages/ar_SA/region-changing.txt +++ b/_pages/ar_SA/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/ar_SA/restoring-cfw.txt b/_pages/ar_SA/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/ar_SA/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/ar_SA/seedminer.txt b/_pages/ar_SA/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/ar_SA/seedminer.txt +++ b/_pages/ar_SA/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/ar_SA/site-navigation.txt b/_pages/ar_SA/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/ar_SA/site-navigation.txt +++ b/_pages/ar_SA/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ar_SA/updating-b9s.txt b/_pages/ar_SA/updating-b9s.txt index 84d8eb17f1..7bc0a5a605 100644 --- a/_pages/ar_SA/updating-b9s.txt +++ b/_pages/ar_SA/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/ca_ES/a9lh-to-b9s.txt b/_pages/ca_ES/a9lh-to-b9s.txt index f85c01ec46..b11e3bae33 100644 --- a/_pages/ca_ES/a9lh-to-b9s.txt +++ b/_pages/ca_ES/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -Si teniu un PIN habilitat a Luma3DS, SafeB9SInstaller us alertarà de l'error "OTP Crypto Fail" a menys que deshabiliteu el vostre PIN temporalment (podeu tornar-lo a habilitar després de l'actualització). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -Hi ha hagut informes d'una onada de bandejaments a usuaris de CFW per part de Nintendo. Per guardar-vos-en, si us plau, seguiu els següents passos abans de començar aquesta guia: - -1. Accediu a la configuració del sistema, a continuació, heu de tocar el requadre on es llegeixi "Configuració d'internet", llavors "SpotPass" i finalment allà on es llegeixi "Enviament d'informació del sistema" -1. Deshabiliteu l'opció d'"Enviament d'informació del sistema" -1. Sortiu de la configuració del sistema -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/ca_ES/bannerbomb3.txt b/_pages/ca_ES/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/ca_ES/bannerbomb3.txt +++ b/_pages/ca_ES/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/ca_ES/checking-for-cfw.txt b/_pages/ca_ES/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/ca_ES/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/ca_ES/credits.txt b/_pages/ca_ES/credits.txt index dc25de079d..a2545e477e 100644 --- a/_pages/ca_ES/credits.txt +++ b/_pages/ca_ES/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Un agraïment especial a tots els de [#Cakey a Freenode] (http://webchat.freenode.net/?channels=%23Cakey) per ser increïbles!** @@ -24,7 +27,7 @@ Si t'he oblidat, contacta'm i hi afegiré el teu nom. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -37,6 +40,7 @@ Si t'he oblidat, contacta'm i hi afegiré el teu nom. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -48,12 +52,12 @@ Si t'he oblidat, contacta'm i hi afegiré el teu nom. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/ca_ES/dsidumper.txt b/_pages/ca_ES/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/ca_ES/dsidumper.txt +++ b/_pages/ca_ES/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ca_ES/faq.txt b/_pages/ca_ES/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/ca_ES/faq.txt +++ b/_pages/ca_ES/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/ca_ES/finalizing-setup.txt b/_pages/ca_ES/finalizing-setup.txt index 7b921f1338..b4790c3d1e 100644 --- a/_pages/ca_ES/finalizing-setup.txt +++ b/_pages/ca_ES/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt b/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/ca_ES/flashing-ntrboot-(nds).txt b/_pages/ca_ES/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/ca_ES/flashing-ntrboot-(nds).txt +++ b/_pages/ca_ES/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/ca_ES/formatting-sd-(linux).txt b/_pages/ca_ES/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/ca_ES/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/ca_ES/formatting-sd-(mac).txt b/_pages/ca_ES/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/ca_ES/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/ca_ES/formatting-sd-(windows).txt b/_pages/ca_ES/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/ca_ES/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/ca_ES/get-started-(new-3ds).txt b/_pages/ca_ES/get-started-(new-3ds).txt index a356bbb8ee..65bd5f0197 100644 --- a/_pages/ca_ES/get-started-(new-3ds).txt +++ b/_pages/ca_ES/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/ca_ES/get-started-(old-3ds).txt b/_pages/ca_ES/get-started-(old-3ds).txt index 8fc9ad47a9..2dbfd6b915 100644 --- a/_pages/ca_ES/get-started-(old-3ds).txt +++ b/_pages/ca_ES/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/ca_ES/get-started.txt b/_pages/ca_ES/get-started.txt index 99fd1d89ba..a7240e762e 100644 --- a/_pages/ca_ES/get-started.txt +++ b/_pages/ca_ES/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Si ja havíeu modificat la vostra 3DS amb anterioritat i teniu una instal·lació de CFW a l'EmuNAND, simplement seguiu totes les instruccions a la SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Abans de començar, és possible que vulgueu comprovar que la vostra targeta SD no tingui errors utilitzant [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), o [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/ca_ES/godmode9-usage.txt b/_pages/ca_ES/godmode9-usage.txt index 1203c4a269..eb657cb578 100644 --- a/_pages/ca_ES/godmode9-usage.txt +++ b/_pages/ca_ES/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/ca_ES/home.txt b/_pages/ca_ES/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/ca_ES/home.txt +++ b/_pages/ca_ES/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/ca_ES/homebrew-launcher-(browserhax-2020).txt b/_pages/ca_ES/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/ca_ES/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ca_ES/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ca_ES/homebrew-launcher-(pichaxx).txt b/_pages/ca_ES/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/ca_ES/homebrew-launcher-(pichaxx).txt +++ b/_pages/ca_ES/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/ca_ES/homebrew-launcher-(soundhax).txt b/_pages/ca_ES/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/ca_ES/homebrew-launcher-(soundhax).txt +++ b/_pages/ca_ES/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/ca_ES/homebrew-launcher-(steelhax).txt b/_pages/ca_ES/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/ca_ES/homebrew-launcher-(steelhax).txt +++ b/_pages/ca_ES/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/ca_ES/installing-boot9strap-(browser).txt b/_pages/ca_ES/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/ca_ES/installing-boot9strap-(browser).txt +++ b/_pages/ca_ES/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/ca_ES/installing-boot9strap-(fredtool).txt b/_pages/ca_ES/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/ca_ES/installing-boot9strap-(fredtool).txt +++ b/_pages/ca_ES/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/ca_ES/installing-boot9strap-(frogtool).txt b/_pages/ca_ES/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/ca_ES/installing-boot9strap-(frogtool).txt +++ b/_pages/ca_ES/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/ca_ES/installing-boot9strap-(hardmod).txt b/_pages/ca_ES/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/ca_ES/installing-boot9strap-(hardmod).txt +++ b/_pages/ca_ES/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt b/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ca_ES/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/ca_ES/installing-boot9strap-(pichaxx).txt b/_pages/ca_ES/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/ca_ES/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ca_ES/installing-boot9strap-(safecerthax).txt b/_pages/ca_ES/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/ca_ES/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ca_ES/installing-boot9strap-(soundhax).txt b/_pages/ca_ES/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/ca_ES/installing-boot9strap-(soundhax).txt +++ b/_pages/ca_ES/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ca_ES/installing-boot9strap-(ssloth-browser).txt b/_pages/ca_ES/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/ca_ES/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/ca_ES/installing-boot9strap-(usm).txt b/_pages/ca_ES/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/ca_ES/installing-boot9strap-(usm).txt +++ b/_pages/ca_ES/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/ca_ES/legacy-methods.txt b/_pages/ca_ES/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/ca_ES/legacy-methods.txt +++ b/_pages/ca_ES/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/ca_ES/ntrboot.txt b/_pages/ca_ES/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/ca_ES/ntrboot.txt +++ b/_pages/ca_ES/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ca_ES/region-changing.txt b/_pages/ca_ES/region-changing.txt index 23ac8eccfe..4d45e236c6 100644 --- a/_pages/ca_ES/region-changing.txt +++ b/_pages/ca_ES/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Premeu (A) per confirmar + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + Si obteniu un error, establiu els vostres paràmetres DNS en "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/ca_ES/restoring-cfw.txt b/_pages/ca_ES/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/ca_ES/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/ca_ES/seedminer.txt b/_pages/ca_ES/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/ca_ES/seedminer.txt +++ b/_pages/ca_ES/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/ca_ES/site-navigation.txt b/_pages/ca_ES/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/ca_ES/site-navigation.txt +++ b/_pages/ca_ES/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ca_ES/updating-b9s.txt b/_pages/ca_ES/updating-b9s.txt index dbb1061a2a..7bc0a5a605 100644 --- a/_pages/ca_ES/updating-b9s.txt +++ b/_pages/ca_ES/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -Hi ha hagut informes d'una onada de bandejaments a usuaris de CFW per part de Nintendo. Per guardar-vos-en, si us plau, seguiu els següents passos abans de començar aquesta guia: - -1. Accediu a la configuració del sistema, a continuació, heu de tocar el requadre on es llegeixi "Configuració d'internet", llavors "SpotPass" i finalment allà on es llegeixi "Enviament d'informació del sistema" -1. Deshabiliteu l'opció d'"Enviament d'informació del sistema" -1. Sortiu de la configuració del sistema -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/cs_CZ/a9lh-to-b9s.txt b/_pages/cs_CZ/a9lh-to-b9s.txt index 60eaed476f..ec52109ad7 100644 --- a/_pages/cs_CZ/a9lh-to-b9s.txt +++ b/_pages/cs_CZ/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/cs_CZ/bannerbomb3.txt b/_pages/cs_CZ/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/cs_CZ/bannerbomb3.txt +++ b/_pages/cs_CZ/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/cs_CZ/checking-for-cfw.txt b/_pages/cs_CZ/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/cs_CZ/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/cs_CZ/credits.txt b/_pages/cs_CZ/credits.txt index e66f591db9..c30986407b 100644 --- a/_pages/cs_CZ/credits.txt +++ b/_pages/cs_CZ/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/cs_CZ/dsidumper.txt b/_pages/cs_CZ/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/cs_CZ/dsidumper.txt +++ b/_pages/cs_CZ/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/cs_CZ/faq.txt b/_pages/cs_CZ/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/cs_CZ/faq.txt +++ b/_pages/cs_CZ/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/cs_CZ/finalizing-setup.txt b/_pages/cs_CZ/finalizing-setup.txt index 90f49a797f..6f9a26a828 100644 --- a/_pages/cs_CZ/finalizing-setup.txt +++ b/_pages/cs_CZ/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt b/_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt b/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/cs_CZ/flashing-ntrboot-(nds).txt b/_pages/cs_CZ/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/cs_CZ/flashing-ntrboot-(nds).txt +++ b/_pages/cs_CZ/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/cs_CZ/formatting-sd-(linux).txt b/_pages/cs_CZ/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/cs_CZ/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/cs_CZ/formatting-sd-(mac).txt b/_pages/cs_CZ/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/cs_CZ/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/cs_CZ/formatting-sd-(windows).txt b/_pages/cs_CZ/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/cs_CZ/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/cs_CZ/get-started-(new-3ds).txt b/_pages/cs_CZ/get-started-(new-3ds).txt index a356bbb8ee..65bd5f0197 100644 --- a/_pages/cs_CZ/get-started-(new-3ds).txt +++ b/_pages/cs_CZ/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/cs_CZ/get-started-(old-3ds).txt b/_pages/cs_CZ/get-started-(old-3ds).txt index 8fc9ad47a9..2dbfd6b915 100644 --- a/_pages/cs_CZ/get-started-(old-3ds).txt +++ b/_pages/cs_CZ/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/cs_CZ/get-started.txt b/_pages/cs_CZ/get-started.txt index 824816730c..a7240e762e 100644 --- a/_pages/cs_CZ/get-started.txt +++ b/_pages/cs_CZ/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/cs_CZ/godmode9-usage.txt b/_pages/cs_CZ/godmode9-usage.txt index 99014ce114..cd139f0548 100644 --- a/_pages/cs_CZ/godmode9-usage.txt +++ b/_pages/cs_CZ/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/cs_CZ/home.txt b/_pages/cs_CZ/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/cs_CZ/home.txt +++ b/_pages/cs_CZ/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/cs_CZ/homebrew-launcher-(browserhax-2020).txt b/_pages/cs_CZ/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/cs_CZ/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/cs_CZ/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/cs_CZ/homebrew-launcher-(pichaxx).txt b/_pages/cs_CZ/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/cs_CZ/homebrew-launcher-(pichaxx).txt +++ b/_pages/cs_CZ/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt +++ b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/cs_CZ/homebrew-launcher-(steelhax).txt b/_pages/cs_CZ/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/cs_CZ/homebrew-launcher-(steelhax).txt +++ b/_pages/cs_CZ/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/cs_CZ/installing-boot9strap-(browser).txt b/_pages/cs_CZ/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/cs_CZ/installing-boot9strap-(browser).txt +++ b/_pages/cs_CZ/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/cs_CZ/installing-boot9strap-(fredtool).txt +++ b/_pages/cs_CZ/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/cs_CZ/installing-boot9strap-(frogtool).txt b/_pages/cs_CZ/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/cs_CZ/installing-boot9strap-(frogtool).txt +++ b/_pages/cs_CZ/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt +++ b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt b/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt +++ b/_pages/cs_CZ/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt +++ b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt b/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/cs_CZ/installing-boot9strap-(safecerthax).txt b/_pages/cs_CZ/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/cs_CZ/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt +++ b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/cs_CZ/installing-boot9strap-(ssloth-browser).txt b/_pages/cs_CZ/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/cs_CZ/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/cs_CZ/installing-boot9strap-(usm).txt b/_pages/cs_CZ/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/cs_CZ/installing-boot9strap-(usm).txt +++ b/_pages/cs_CZ/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/cs_CZ/legacy-methods.txt b/_pages/cs_CZ/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/cs_CZ/legacy-methods.txt +++ b/_pages/cs_CZ/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/cs_CZ/ntrboot.txt b/_pages/cs_CZ/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/cs_CZ/ntrboot.txt +++ b/_pages/cs_CZ/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/cs_CZ/region-changing.txt b/_pages/cs_CZ/region-changing.txt index 75af6091cf..595af43745 100644 --- a/_pages/cs_CZ/region-changing.txt +++ b/_pages/cs_CZ/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/cs_CZ/restoring-cfw.txt b/_pages/cs_CZ/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/cs_CZ/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/cs_CZ/seedminer.txt b/_pages/cs_CZ/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/cs_CZ/seedminer.txt +++ b/_pages/cs_CZ/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/cs_CZ/site-navigation.txt b/_pages/cs_CZ/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/cs_CZ/site-navigation.txt +++ b/_pages/cs_CZ/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/cs_CZ/updating-b9s.txt b/_pages/cs_CZ/updating-b9s.txt index 84d8eb17f1..7bc0a5a605 100644 --- a/_pages/cs_CZ/updating-b9s.txt +++ b/_pages/cs_CZ/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/de_DE/a9lh-to-b9s.txt b/_pages/de_DE/a9lh-to-b9s.txt index 7534e3fc2a..b72a0c8efb 100644 --- a/_pages/de_DE/a9lh-to-b9s.txt +++ b/_pages/de_DE/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this Um die `.7z` Dateien, welche auf dieser Seite verlinkt sind, entpacken zu können, benötigst du ein Archivprogramm wie zum Beispiel [7-Zip](http://www.7-zip.org/) oder [The Unarchiver](https://theunarchiver.com/). -Wenn du eine PIN für Luma3DS aktiviert hast, wird SafeB9SInstaller einen "OTP Crypto Fail"-Fehler ausgeben, außer du deaktivierst deine PIN vorübergehend (nach dem Update kannst du die PIN wieder aktivieren). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -Es gibt Berichte über eine Welle von Banns, die Nintendo an CFW-Nutzer aushändigt. Damit du keine Fehler machst, solltest du zuerst folgende Schritte befolgen: - -1. Gehe zu den System-Einstellungen, dann "Internet-Einstellungen", dann "SpotPass" und dann "Senden von System-Informationen" -1. Deaktiviere die Option "Senden von Systeminformationen an Nintendo" -1. Schließe die Systemeinstellungen -1. Öffne deine Freundesliste (das [Icon mit dem orangenen Gesicht]({{ "/images/friend-list-icon.png" | absolute_url }}) in der obersten Zeile des Home-Menüs) - + Wenn du eine Fehlermeldung bekommst und aus dem Menü rausgeschmissen wirst, wurde entweder die Einstellung für die Freundesliste deaktiviert oder die Konsole kann sich nicht mit den Nintendo Servern verbinden (wegen eines Banns oder Verbindungsproblemen) -1. Gehe zu den Einstellungen der Freundesliste, dann zu "Statusanzeige", dann "Freunden zeigen, was du spielst?" -1. Deaktiviere die Option "Freunden zeigen, was du spielst?" -1. Schließe die Freundesliste - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### Was du brauchst Beachte, dass die folgende Datei namens `secret_sector.bin` die gleiche ist, die auch in den verschiedenen Versionen der `data_input.zip` enthalten ist. Wenn du diese Datei irgendwo auf deiner Festplatte hast, kannst du diese benutzen anstatt die folgende Datei herunterzuladen. @@ -42,11 +26,10 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Anleitung @@ -57,8 +40,7 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm 1. Schalte deine Konsole aus 1. Stecke deine SD-Karte in deinen Computer -1. Kopiere die Datei `boot.3dsx` in das Stammverzeichnis deiner SD-Karte -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Kopiere `arm9loaderhax.bin`aus der Version v7.0.5 Luma3DS `.7z`in das Stammverzeichnis deiner SD-Karte. 1. Lösche alle `.bin`-Payloads im `/luma/payloads/`-Ordner deiner SD-Karte, da sie mit den Luma3DS Versionen, die boot9strap unterstützen, nicht mehr kompatibel sind 1. Kopiere die Datei `SafeB9SInstaller.bin` von der SafeB9SInstaller `.zip` in den Ordner `/luma/payloads/` auf deiner SD-Karte diff --git a/_pages/de_DE/bannerbomb3.txt b/_pages/de_DE/bannerbomb3.txt index 071c5d7fb1..0e92c742ec 100644 --- a/_pages/de_DE/bannerbomb3.txt +++ b/_pages/de_DE/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Inhalt" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lesen erforderlich To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/de_DE/checking-for-cfw.txt b/_pages/de_DE/checking-for-cfw.txt new file mode 100644 index 0000000000..3f24eeb24e --- /dev/null +++ b/_pages/de_DE/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Anleitung + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/de_DE/credits.txt b/_pages/de_DE/credits.txt index db5df55200..3285ec39be 100644 --- a/_pages/de_DE/credits.txt +++ b/_pages/de_DE/credits.txt @@ -2,6 +2,9 @@ title: "Danksagung" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Vielen Dank an alle Nutzer aus [#Cakey auf Freenode](http://webchat.freenode.net/?channels=%23Cakey)! Ihr seid großartig!** {: .notice--primary} @@ -22,7 +25,7 @@ Sollte ich vergessen haben, dich hier aufzuführen, dann kontaktiere mich und ic + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Sollte ich vergessen haben, dich hier aufzuführen, dann kontaktiere mich und ic + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Sollte ich vergessen haben, dich hier aufzuführen, dann kontaktiere mich und ic + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/de_DE/dsidumper.txt b/_pages/de_DE/dsidumper.txt index d3053d86b6..9762798a6c 100644 --- a/_pages/de_DE/dsidumper.txt +++ b/_pages/de_DE/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Inhalt" %} - -### Lesen erforderlich - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### Was du brauchst - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Schritt I - Vorbereitungen - -1. Schalte deinen 3DS aus -1. Stecke deine SD-Karte in deinen Computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Stecke deine SD-Karte nun wieder in deinen 3DS -1. Schalte deine Konsole an - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/de_DE/faq.txt b/_pages/de_DE/faq.txt index ff45932c08..de44066f78 100644 --- a/_pages/de_DE/faq.txt +++ b/_pages/de_DE/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A: ** Ja **F:** *Wie aktualisiere ich Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **F:** *Ich habe von Sachen gehört, für die ich bezahlen muss (Gateway, Sky3DS, etc). Ist das etwas, was ich brauche?* **A:** Nein. boot9strap ist die beste Methode Hax zu laden, die sehr früh im Bootprozess ausgeführt werden. diff --git a/_pages/de_DE/finalizing-setup.txt b/_pages/de_DE/finalizing-setup.txt index 0c6bf8c6db..e42d17390b 100644 --- a/_pages/de_DE/finalizing-setup.txt +++ b/_pages/de_DE/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Setup abschließen" Die Datei "boot.firm", die von boot9strap gestartet wird nachdem es vom NAND geladen wurde kann jeder funktionierende ARM9-Payload sein, wenn er im FIRM-Format ist. Die Datei kann jederzeit ersetzt werden, obwohl Luma3DS bei dem Start anderer ARM9-Payloads im FIRM-Format den Luma3DS-Chainloader benutzt. -In diesem Fall verwendest du Luma3DS von [AuroraWright](https://github.com/AuroraWright/), um direkt einen gepatchten SysNAND zu starten. Dies erlaubt es dir, die Notwendigkeit eines EmuNAND jeglicher Art komplett zu umgehen, was die Nutzung eines gehackten 3DS wesentlich erleichtert, sowie Speicherplatz auf der SD-Karte spart. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Während dieses Prozesses richtest du auch folgende Programme ein: + **FBI** *(installiert Spiele und Anwendungen im CIA-Format)* + **Anemone3DS** *(installiert benutzerdefinierte Themes)* + **Checkpoint** *(Sichern und Wiederherstellen der Speicherdaten von 3DS- und DS-Spielen)* -+ **Luma3DS Updater** *(aktualisiert deine CFW Installation)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(Multifunktionstool, welches NAND- und Cartridge-Funktionen ausführen kann)* + **Homebrew Launcher Loader** *(startet den Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ Während dieses Prozesses richtest du auch folgende Programme ein: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Anleitung @@ -39,15 +39,16 @@ Während dieses Prozesses richtest du auch folgende Programme ein: 1. Schalte dein Gerät aus 1. Stecke deine SD-Karte in deinen Computer 1. Erstelle einen Ordner namens `3ds` im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Erstelle einen Ordner namens `cias` im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Kopiere `FBI.3dsx` in den `/3ds/`Ordner auf deiner SD-Karte 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Kopiere `lumaupdater.cia` in den `/cias/`Ordner auf deiner SD-Karte 1. Kopiere `FBI.cia` in den `/cias/`Ordner auf der deiner SD-Karte 1. Kopiere `DSP1.cia` in den `/cias/` Ordner auf deiner SD-Karte 1. Kopiere `Anemone3DS.cia` in den `/cias/` Ordner auf deiner SD-Karte 1. Kopiere `Checkpoint.cia` in den `/cias/` Ordner auf deiner SD-Karte +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Erstelle einen Ordner mit dem Namen `payloads` im Ordner`luma` deiner SD-Karte, falls er noch nicht existiert 1. Kopiere `Godmode9.firm` von der Godmode9 `.zip` nach `/luma/payloads/` auf deiner SD Karte 1. Kopiere den Ordner `gm9` aus der GodMode9 `.zip`in das Stammverzeichnis deiner SD-Karte @@ -102,7 +103,7 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in #### Schritt VI - CTRNAND Luma3DS 1. Schalte deinen 3DS aus -1. Starte GodMode9, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Wenn du aufgefordert wirst, ein "essential files backup" durchzuführen, drücke (A). Drücke erneut (A) nachdem es abgeschlossen ist 1. Wenn du aufgefordert wirst Datum und Uhrzeit der "RTC" (Real Time Clock, Echtzeituhr) zu korrigieren, drücke (A), stelle Datum und Uhrzeit ein und drücke (A) um fortzufahren 1. Drücke (HOME) um das Aktionsmenü aufzurufen @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Ab jetzt kannst du den Luma 3DS Updater verwenden, um Luma3DS auf dem neuesten Stand zu halten. Dafür drücke einfach den (A)-Knopf nach dem Öffnen des Updaters. - -Das ist nicht das gleiche wie ein System-Update; der Updater lädt nur die neuesten Dateien für Luma3DS herunter. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Beim einschalten wird nun standartmäßig Luma3DS CFW SysNAND gebootet. +You will now boot Luma3DS CFW by default. Du kannst nun (Select) beim Starten halten, um das Luma3DS Konfigurationsmenü zu öffnen. @@ -177,7 +168,7 @@ Du kannst nun (L) + (Steuerkreuz unten) + (Select) drücken, während das System {% capture notice-6 %} Wenn du eine größere SD-Karte verwenden möchtest, musst du diese nur in FAT32 formatieren und die Dateien von der alten SD-Karte auf die neue, größere verschieben. -Wenn deine neue SD-Karte größer als 32GB ist, benötigst du zum Formatieren andere Programme, wie [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) für Windows, [gparted](http://gparted.org/download.php) für Linux, oder [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) für Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Für mehr Informationen über die Verwendung von GodMode9's verschiedenen Funkti Informationen, wie du die verschiedenen Funktionen von Luma3DS nutzen kannst, findest du auf der entsprechenden [Wiki-Seite](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -Für Informationen zur Installation von benutzerdefinierten Designs, Abzeichen und Splash-Screens, schau mal auf [Theme Plaza](https://https://themeplaza.eu/) vorbei. +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt b/_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt index 5f1eadb036..647b694ddb 100644 --- a/_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ In seltenen Fällen ist kann es sein, dass während des Flashens einer gefälsch * Zwei 3DS Konsolen + **Der Quell-3DS**: das System auf dem schon boot9strap läuft + **Der Ziel-3DS**: das System mit regulärer Firmware -* Die aktuellste Version von [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; nicht die `devkit` Datei)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Anleitung diff --git a/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt b/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt index c78a961df4..cf755119f6 100644 --- a/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ In seltenen Fällen ist kann es sein, dass während des Flashens einer gefälsch ### Was du brauchst * Deine ntrboot kompatible Flashkarte -* Die aktuellste Version von [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; nicht die `devkit` Datei)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Anleitung diff --git a/_pages/de_DE/flashing-ntrboot-(nds).txt b/_pages/de_DE/flashing-ntrboot-(nds).txt index f563978b51..71fd4db614 100644 --- a/_pages/de_DE/flashing-ntrboot-(nds).txt +++ b/_pages/de_DE/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ In manchen seltenen Fällen ist es möglich, das während des Flashens einer gef * Zwei Geräte + **Der Quell-NDS / -NDSL**: Der Nintendo DS oder Nintendo DS Lite, welcher mit deiner Flashkarte kompatibel ist + **Der Ziel-3DS**: das Gerät der 3DS-Familie mit regulärer Firmware -* Die aktuellste Version von [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; nicht die `devkit` Datei)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Anleitung diff --git a/_pages/de_DE/formatting-sd-(linux).txt b/_pages/de_DE/formatting-sd-(linux).txt new file mode 100644 index 0000000000..d56b286712 --- /dev/null +++ b/_pages/de_DE/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Diese Seite ist nur für Linux-Nutzer gedacht. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Anleitung +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/de_DE/formatting-sd-(mac).txt b/_pages/de_DE/formatting-sd-(mac).txt new file mode 100644 index 0000000000..3d3780fa38 --- /dev/null +++ b/_pages/de_DE/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Diese Seite ist nur für macOS-Nutzer. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Anleitung + +#### OS X El Capitan (10.11) and later + +1. Stecke deine SD-Karte in deinen Computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Stecke deine SD-Karte in deinen Computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/de_DE/formatting-sd-(windows).txt b/_pages/de_DE/formatting-sd-(windows).txt new file mode 100644 index 0000000000..aa6be6dc5d --- /dev/null +++ b/_pages/de_DE/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Diese Seite ist nur für Windowsnutzer gedacht. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Was du brauchst + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Anleitung + +1. Stecke deine SD-Karte in deinen Computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/de_DE/get-started-(new-3ds).txt b/_pages/de_DE/get-started-(new-3ds).txt index 03b3213225..1e0ed79be0 100644 --- a/_pages/de_DE/get-started-(new-3ds).txt +++ b/_pages/de_DE/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Los geht's (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="Inhalt" %} ### Lesen erforderlich -Wähle die passende Methode für deine Version aus der unteren Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Zeile "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet. - -Außerdem beachte, dass die letzte Zahl deiner System-Version (welche durch einen Bindestrich abgetrennt ist) sich auf die Version Ihres Browsers bezieht. Derzeit ist die Browserversion irrelevant für den neuen 3DS in dieser Anleitung. - -**Wenn du den Anweisungen zu deiner Version wegen fehlenden Vorraussetzungen nicht folgen kannst, solltest du die "Alle Versionen" Reihe für Methoden die mit allen Systemversionen funktionieren anschauen.** - -Für alle Versionen kannst du auch ein [Kartenupdate](cart-update) (oder ein normales Systemupdate) zu einer höheren Version in der gleichen Spalte durchführen und deren Anweisung folgen. +Wähle die entsprechende Seite für deine Version aus der unten folgenden Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den Systemeinstellungen. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Versionstabelle - + - - - + + + - - - - - - - - - - - + - + - + - - + + - - - + + - +
Von BisVonBisAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.0Installation von boot9strap (Soundhax)
9.0.01.0.0 11.3.0Homebrew Launcher (Soundhax)Installing boot9strap (Soundhax)
11.4.011.7.0Benutze eine "Alle Versionen" Methode11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installation von boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALLE VERSIONEN

ntrboot
(Benötigt eine kompatible Flashcart)

oder

Installiere boot9strap (Hardmod)
(Setzt Löten voraus)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/de_DE/get-started-(old-3ds).txt b/_pages/de_DE/get-started-(old-3ds).txt index 792be2d55b..526af97bed 100644 --- a/_pages/de_DE/get-started-(old-3ds).txt +++ b/_pages/de_DE/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "Los geht's (Old 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="Inhalt" %} ### Lesen erforderlich -Wähle die entsprechende Seite für deine Version aus der unten folgenden Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Spalte "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet. - -Die letzten beiden Spalten beziehen sich auf die letzte Nummer deiner Version (welche zeigt, welche Version des Browsers auf deiner Konsole installiert ist). Wenn die Version "-0" entspricht, ist kein Browser vorhanden, alle Nummern über "-0" bedeuten, dass ein Browser installiert ist. - -Im Falle der Version "5.0.0-0U" zum Beispiel würdest du die Spalte "Kein Browser" mit der Zeile "5.0.0 bis 5.1.0" wählen, weil sich die Systemsoftware in dieser Reichweite befindet und kein Browser installiert ist. - -**Wenn du den Anweisungen zu deiner Version wegen fehlenden Vorraussetzungen nicht folgen kannst, solltest du die "Alle Versionen" Reihe für Methoden die mit allen Systemversionen funktionieren anschauen.** - -Für alle Versionen kannst du auch ein [Kartenupdate](cart-update) (oder ein normales Systemupdate) zu einer höheren Version in der gleichen Spalte durchführen und deren Anweisung folgen. +Wähle die entsprechende Seite für deine Version aus der unten folgenden Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den Systemeinstellungen. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Versionstabelle @@ -33,49 +28,23 @@ Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Von BisKein BrowserBrowserAction
1.0.02.0.0Benutze eine "Alle Versionen" Methode
2.1.02.1.0Benutze eine "Alle Versionen" MethodeInstalling boot9strap (2xrsa)
2.2.02.2.0Benutze eine "Alle Versionen" Methode
3.0.08.1.0Installation von boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Benutze eine "Alle Versionen" MethodeInstalling boot9strap (Soundhax)
11.8.011.8.0Installation von boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALLE VERSIONEN

ntrboot
(Benötigt eine kompatible Flashcart)

oder

Installiere boot9strap (Hardmod)
(Setzt Löten voraus)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/de_DE/get-started.txt b/_pages/de_DE/get-started.txt index cdd5a3ec91..c7cd56aeec 100644 --- a/_pages/de_DE/get-started.txt +++ b/_pages/de_DE/get-started.txt @@ -6,85 +6,16 @@ title: "Los geht's" ### Lesen erforderlich -Wähle die entsprechende Seite für deine Version aus der unten folgenden Tabelle. Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Spalte "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet. - -Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den Systemeinstellungen. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -Für alle Versionen kannst du auch ein [Kartenupdate](cart-update) (oder ein normales Systemupdate) zu einer höheren Version in der gleichen Spalte durchführen und deren Anweisung folgen. - -Wenn du deinen 3DS bereits gehackt hast und eine CFW mit EmuNAND hast, folge einfach allen Schritten auf deinem SysNAND. Ersetze alle bereits vorhandenen Dateien. Deine Daten vom EmuNAND werden zur neuen B9S-Installation übertragen. Wenn du Menuhax verwendest, solltest du [die Home-Menü extdata löschen](troubleshooting#clear-home-menu-extdata) um es vor Beginn zu entfernen. - -Diese Seite erklärt, wie man boot9strap auf einem *unmodifizierten* 3DS oder 2DS installiert. Falls du arm9loaderhax bereits installiert hast und zu boot9strap updaten möchtest, befolge die [A9LH zu B9S](a9lh-to-b9s) Anleitung. -{: .notice--primary} - -Bevor du beginnst, solltest du als Windows-Benutzer die Option zum Anzeigen der Datei-Erweiterungen aktivieren mit [Datei-Erweiterungen (Windows)](file-extensions-(windows))! -{: .notice--info} - -Bevor du anfängst, solltest du deine SD-Karte auf Fehler überprüfen. Verwende dazu [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), oder [F3X (macOS)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Versionstabelle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
VonBisAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALLE VERSIONEN

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/de_DE/godmode9-usage.txt b/_pages/de_DE/godmode9-usage.txt index 9dba59ca2e..6c89770928 100644 --- a/_pages/de_DE/godmode9-usage.txt +++ b/_pages/de_DE/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "Benutzung von GodMode9" {% include toc title="Inhalt" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Lesen erforderlich diff --git a/_pages/de_DE/home.txt b/_pages/de_DE/home.txt index ec4fcc2985..4e3d7430bd 100644 --- a/_pages/de_DE/home.txt +++ b/_pages/de_DE/home.txt @@ -63,7 +63,7 @@ Für eine Liste aller berechneten sighax-Signaturen, siehe in [diesem gist](http ## Was kann ich mit Custom Firmware anstellen? + Spiele unabhängig der Region alle Game Cards und eShop Spiele -+Gestalte dein Home-Menü mit von Benutzer erstellten [Designs und Splash Screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Nutze "ROM-Hacks" für Spiele, die du besitzt + Nimm Screenshots deiner Spiele und Programme auf + Sichere, bearbeite und stelle Spielstände vieler Spiele wieder her @@ -78,11 +78,11 @@ Für eine Liste aller berechneten sighax-Signaturen, siehe in [diesem gist](http + **Bevor du mit dieser Anleitung anfängst, musst du die Risiken kennen: JEDES mal wenn du deinen 3DS modifizierst, besteht die Gefahr eines BRICKS, der deine Konsole UNWIDERRUFLICH unbrauchbar macht. Ein Brick tritt selten auf, aber ein Restrisiko bleibt bestehen, also befolge ALLE Anweisungen dieser Anleitung GENAUESTENS.** + Wenn du deinen 3DS bereits modifiziert hast und bereits über ein EmuNAND-Setup verfügst, kannst du den Inhalt des vorherigen EmuNANDs auf dein neues CFW-SysNAND transferieren. Befolge dazu alle Anweisungen zum Wiederherstellen des EmuNAND sobald du im Abschnitt [Setup fertigstellen](finalizing-setup) dazu aufgefordert wirst. -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Wenn alles nach Plan verläuft, wirst du keine Daten verlieren und dein System wird die gleichen Daten wie vorher haben (Spiele, NNID, Speicherstände, etc. werden erhalten bleiben). + Deine Konsole während des gesamten Prozesses mit dem Ladekabel aufzuladen vermeidet Datenverluste oder Schäden durch unerwartetes Ausschalten! + Deine SD-Karte sollte mit [MBR, nicht GPT](http://www.howtogeek.com/245610/) formatiert sein. (Die mitgelieferte SD-Karte ist standardmäßig mit MBR formatiert). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ Mit dem Tool [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) kannst du eine SD-Karte passend formatieren. Denke daran, die Größe der Zuordnungseinheiten auf 32K (32768) zu setzen. ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/de_DE/homebrew-launcher-(browserhax-2020).txt b/_pages/de_DE/homebrew-launcher-(browserhax-2020).txt index 41dd1f8618..487f25a45c 100644 --- a/_pages/de_DE/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/de_DE/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Inhalt" %} - -### Lesen erforderlich - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### Was du brauchst - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Anleitung - -#### Schritt I - Vorbereitungen - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. Wenn der Exploit erfolgreich war, wird der Homebrew Launcher gestartet - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/de_DE/homebrew-launcher-(pichaxx).txt b/_pages/de_DE/homebrew-launcher-(pichaxx).txt index 8518aca422..4f8fdf8b74 100644 --- a/_pages/de_DE/homebrew-launcher-(pichaxx).txt +++ b/_pages/de_DE/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Inhalt" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lesen erforderlich This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Anleitung @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Kopiere die `boot.3dsx`-Datei in das Stammverzeichnis deiner SD-Karte 1. Kopiere die otherapp payload auf das Stammverzeichnis deiner SD-Karte und benenne diese zu `otherapp.bin` um - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Erstelle einen Ordner namens `3ds` im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an 1. Launch "Pokemon Picross" 1. Wenn der Exploit erfolgreich war, wird der Homebrew Launcher gestartet - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Schalte deinen 3DS aus ___ diff --git a/_pages/de_DE/homebrew-launcher-(soundhax).txt b/_pages/de_DE/homebrew-launcher-(soundhax).txt index 93f7ccc4e9..9fbcf2e63b 100644 --- a/_pages/de_DE/homebrew-launcher-(soundhax).txt +++ b/_pages/de_DE/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Stelle sicher, dass die Drahtloskommunikation deiner Konsole eingeschaltet ist, Beachte, dass Karten-Updates nur Updates für Kernfunktionen, wie die Systemeinstellungen, das Home-Menü und ähnlichem liefern. Karten-Updates aktualisieren nicht den Nintendo 3DS Sound und die Netzwerkfunktionen, wie den Internetbrowser, den eShop, die StreetPass Mii Plaza oder der System-Transfer. -Das bedeutet, dass bei einem Kartenupdate von einer Systemversion, die eine ältere Version von Nintendo 3DS Sound enthält *(<3.0.0)*, auf eine Systemversion mit einer neuen Version von Nintendo 3DS Sound, Soundhax unbrauchbar wird! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ Das bedeutet, dass bei einem Kartenupdate von einer Systemversion, die eine ält ### Was du brauchst * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Anleitung diff --git a/_pages/de_DE/homebrew-launcher-(steelhax).txt b/_pages/de_DE/homebrew-launcher-(steelhax).txt index 2b213715d5..65ec1b9a69 100644 --- a/_pages/de_DE/homebrew-launcher-(steelhax).txt +++ b/_pages/de_DE/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Inhalt" %} - -### Lesen erforderlich - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### Was du brauchst - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Anleitung - -#### Schritt I - Vorbereitungen - -1. Erstelle einen Ordner namens `3ds` im Stammverzeichnis deiner SD-Karte falls er noch nicht existiert -1. Kopiere die `boot.3dsx`-Datei in das Stammverzeichnis deiner SD-Karte -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Schalte deinen 3DS aus -1. Stecke deine SD-Karte in deinen Computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Stecke deine SD-Karte nun wieder in deinen 3DS -1. Schalte deine Konsole an -1. Launch "Steel Diver: Sub Wars" -1. Wenn der Exploit erfolgreich war, wird der Homebrew Launcher gestartet - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/de_DE/installing-boot9strap-(browser).txt b/_pages/de_DE/installing-boot9strap-(browser).txt index c18d0f82e6..6a746eb6c1 100644 --- a/_pages/de_DE/installing-boot9strap-(browser).txt +++ b/_pages/de_DE/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installation von boot9strap (Browser)" {% include toc title="Inhalt" %} +### Lesen erforderlich + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### Was du brauchst +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Anleitung @@ -16,24 +24,21 @@ title: "Installation von boot9strap (Browser)" 1. Schalte deinen 3DS aus 1. Stecke deine SD-Karte in deinen Computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte -1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte -1. Kopiere `SafeB9SInstaller.dat` und `Launcher.dat` aus der SafeB9SInstaller `.zip` in das Stammverzeichnis deiner SD-Karte - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an #### Abschnitt II - Starten von SafeBS9Installer -1. Starte den Browser und besuche eine der folgenden URLs auf deinem Gerät - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Schalte deine Konsole an +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + Solltest du eine Fehlermeldung erhalten, [folge diesen Anweisungen](troubleshooting#a-browser-based-exploit-is-not-working) 1. Wenn der Exploit erfolgreich war, wird nun direkt zum SafeBS9Installer gebootet @@ -50,7 +55,6 @@ title: "Installation von boot9strap (Browser)" 1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren: + **"Show NAND or user string in System Settings"** 1. Drücke (Start) zum Speichern und neustarten - + Falls ein Fehler angezeigt wird, fahre einfach mit der nächsten Seite fort ___ diff --git a/_pages/de_DE/installing-boot9strap-(fredtool).txt b/_pages/de_DE/installing-boot9strap-(fredtool).txt index c38cdd8292..75f9da57ff 100644 --- a/_pages/de_DE/installing-boot9strap-(fredtool).txt +++ b/_pages/de_DE/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Inhalt" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lesen erforderlich This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ Dies ist eine zurzeit funktionierende Implementation des "FIRM Partitions Known- ### Was du brauchst -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Schritt I - Vorbereitungen @@ -28,18 +31,18 @@ Dies ist eine zurzeit funktionierende Implementation des "FIRM Partitions Known- #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Schalte deinen 3DS aus 1. Stecke deine SD-Karte in deinen Computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an diff --git a/_pages/de_DE/installing-boot9strap-(frogtool).txt b/_pages/de_DE/installing-boot9strap-(frogtool).txt index 5c75d359e2..f06d9bab82 100644 --- a/_pages/de_DE/installing-boot9strap-(frogtool).txt +++ b/_pages/de_DE/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Inhalt" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lesen erforderlich We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Schritt I - Vorbereitungen 1. Stecke deine SD-Karte in deinen Computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Stecke deine SD-Karte nun wieder in deinen 3DS @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Drücke (Start) zum Speichern und neustarten + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Wähle "Miscellaneous options" +1. Wähle "Switch the hb. title to the current app." +1. Drücke (B) um fortzufahren +1. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren +1. Drücke (B), um das Rosalina-Menü zu schließen +1. Drücke (Home) und schließe die Download-Spiel Anwendung +1. Relaunch the Download Play application +1. Deine Konsole sollte den Homebrew Launcher laden +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Fortfahren mit [Setup fertigstellen](finalizing-setup) diff --git a/_pages/de_DE/installing-boot9strap-(hardmod).txt b/_pages/de_DE/installing-boot9strap-(hardmod).txt index c67ff0d5d7..303ab0daf0 100644 --- a/_pages/de_DE/installing-boot9strap-(hardmod).txt +++ b/_pages/de_DE/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ Dies funktioniert auf mit New 3DS, New 2DS, Old 3DS und Old 2DS auf *allen* Vers * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows-Benutzer können die kompilierte `.exe` benutzen, während Mac und Linux-Benutzer [Python 3] (https://www.python.org/downloads/) installiert haben müssen, um die `.py` auszuführen -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * Die `.firm` entsprechend deiner Konsole und Firmware: | Version(en) | Kernel | Old 3DS oder Old 2DS | New 3DS oder New 2DS | diff --git a/_pages/de_DE/installing-boot9strap-(hbl-usm).txt b/_pages/de_DE/installing-boot9strap-(hbl-usm).txt index 8e291b531f..a42d09cecd 100644 --- a/_pages/de_DE/installing-boot9strap-(hbl-usm).txt +++ b/_pages/de_DE/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Inhalt" %} - -### Lesen erforderlich - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Was du brauchst - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Schritt I - Vorbereitungen - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Schritt III - Luma3DS konfigurieren - -1. Your device should automatically show the Luma Configuration menu -1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren: - + **"Show NAND or user string in System Settings"** -1. Drücke (Start) zum Speichern und neustarten - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Starte die Download-Spiel Anwendung -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Wähle "Miscellaneous options" -1. Wähle "Switch the hb. title to the current app." -1. Drücke (B) um fortzufahren -1. Drücke (B), um zum Rosalina-Hauptmenü zurückzukehren -1. Drücke (B), um das Rosalina-Menü zu schließen -1. Drücke (Home) und schließe die Download-Spiel Anwendung -1. Relaunch the Download Play application -1. Deine Konsole sollte den Homebrew Launcher laden -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Fortfahren mit [Setup fertigstellen](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/de_DE/installing-boot9strap-(ntrboot).txt b/_pages/de_DE/installing-boot9strap-(ntrboot).txt index 486838e39c..db459f231d 100644 --- a/_pages/de_DE/installing-boot9strap-(ntrboot).txt +++ b/_pages/de_DE/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * Ein Magnet, der den Standby-Modus des Geräts auslöst (wenn das Gerät zuklappbar ist) * Deine ntrboot geflashte Flashkarte * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Anleitung #### Schritt I - Vorbereitungen 1. Schalte deine Konsole aus -1. Stecke die SD-Karte deiner Konsole in deinen Computer +1. Insert your console's SD card into your computer + Die SD-Karte deines 3DS, *nicht* die SD-Karte deiner Flashkarte -1. Kopiere `SafeB9SInstaller.firm` ins Stammverzeichnis deiner SD-Karte and benenne sie in `boot.firm` um -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte -1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip`-Datei in den `/boot9strap/`-Ordner auf deiner SD-Karte +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Stecke deine SD-Karte wieder in deine Konsole +1. Reinsert your SD card into your 3DS 1. Schalte deine Konsole an #### Schritt II - ntrboot @@ -60,7 +60,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. Stecke deine SD-Karte in deinen Computer 1. Lösche `boot.firm` aus dem Stammverzeichnis deiner SD-Karte 1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Stecke die SD-Karte wieder in deine Konsole ein +1. Stecke deine SD-Karte wieder in deine Konsole 1. Schalte deine Konsole an 1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + Wenn du einen schwarzen Bildschirm bekommst, [folge dieser Problembehandlung](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) @@ -127,7 +127,7 @@ Folge diesen Schritten erst, wenn du den Rest der Anweisungen auf dieser Seite a 1. Kopiere die `.bin`-Datei von deiner Flashrom-Backup `.zip` in den Ordner `/ntrboot/` auf dem Stammverzeichnis der SD-Karte 1. Erstelle einen Ordner mit dem Namen `payloads` im `luma`-Ordner auf deiner SD-Karte 1. Kopiere `ntrboot_flasher.firm` in den `/luma/payloads` Ordner der SD-Karte -1. Stecke deine SD-Karte nun wieder in deinen 3DS +1. Stecke die SD-Karte wieder in deine Konsole ein 1. Stecke die ntrboot-kompatible DS / DSi Flashkarte in deine Konsole 1. Starte ntrboot_flasher, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst 1. Lies die Warnung auf dem roten Bildschirm diff --git a/_pages/de_DE/installing-boot9strap-(pichaxx).txt b/_pages/de_DE/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..97919af593 --- /dev/null +++ b/_pages/de_DE/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Inhalt" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Lesen erforderlich + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### Was du brauchst + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Anleitung + +#### Schritt I - Vorbereitungen + +1. Schalte deinen 3DS aus +1. Stecke deine SD-Karte in deinen Computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte +1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Stecke deine SD-Karte nun wieder in deinen 3DS +1. Schalte deine Konsole an +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Schritt III - boot9strap installieren + +1. Warte auf alle Sicherheitsüberprüfungen +1. Gib die Tastenkombination zur Bestätigung ein, wenn danach verlangt wird +1. Sobald dies abgeschlossen ist drücke (A) um das Gerät neuzustarten + +#### Schritt IV - Luma3DS konfigurieren + +1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Wenn du einen schwarzen Bildschirm siehst, [Folge diesen Anweisungen](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren: + + **"Show NAND or user string in System Settings"** +1. Drücke (Start) zum Speichern und neustarten + + Falls ein Fehler angezeigt wird, fahre einfach mit der nächsten Seite fort + +___ + +### Fortfahren mit [Setup fertigstellen](finalizing-setup) +{: .notice--primary} diff --git a/_pages/de_DE/installing-boot9strap-(safecerthax).txt b/_pages/de_DE/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..3f17b81063 --- /dev/null +++ b/_pages/de_DE/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### Was du brauchst + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Anleitung + +#### Schritt I - Vorbereitungen +1. Schalte deinen 3DS aus +1. Stecke deine SD-Karte in deinen Computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Stecke deine SD-Karte nun wieder in deinen 3DS +1. Schalte deine Konsole an + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Schalte deinen 3DS aus + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. Wenn der Exploit erfolgreich war, wird nun direkt zum SafeBS9Installer gebootet + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Warte auf alle Sicherheitsüberprüfungen +1. Gib die Tastenkombination zur Bestätigung ein, wenn danach verlangt wird +1. Sobald dies abgeschlossen ist drücke (A) um das Gerät neuzustarten + +#### Section V - Configuring Luma3DS + +1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Wenn du einen schwarzen Bildschirm siehst, [Folge diesen Anweisungen](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren: + + **"Show NAND or user string in System Settings"** +1. Drücke (Start) zum Speichern und neustarten + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Schalte deinen 3DS aus + +___ + +### Fortfahren mit [Setup fertigstellen](finalizing-setup) +{: .notice--primary} diff --git a/_pages/de_DE/installing-boot9strap-(soundhax).txt b/_pages/de_DE/installing-boot9strap-(soundhax).txt index d77042a47c..6e5383ccef 100644 --- a/_pages/de_DE/installing-boot9strap-(soundhax).txt +++ b/_pages/de_DE/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installation von boot9strap (Soundhax)" ### Lesen erforderlich -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Beachte, dass Karten-Updates nur Updates für Kernfunktionen, wie die Systemeinstellungen, das Home-Menü und ähnlichem liefern. Karten-Updates aktualisieren nicht den Nintendo 3DS Sound und die Netzwerkfunktionen, wie den Internetbrowser, den eShop, die StreetPass Mii Plaza oder der System-Transfer. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### Was du brauchst * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Anleitung @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Schalte deinen 3DS aus 1. Stecke deine SD-Karte in deinen Computer 1. Kopiere die Soundhax`.m4a` in das Stammverzeichnis der SD-Karte -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Kopiere die `boot.3dsx`-Datei in das Stammverzeichnis deiner SD-Karte +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte 1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte -1. Kopiere `arm9.bin` aus der SafeB9SInstaller `.zip` in das Stammverzeichnis deiner SD-Karte +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In dieser Situation würde das Starten von Soundhax sofort dazu führen, dass diese Tipps, bei jedem Start des Nintendo 3DS Sound angezeigt werden, bis dies geschehen ist 1. Gehe zu `/SDCARD` und spiele die Datei "<3 nedwill 2016" ab + Dies kann einige Versuche benötigen - + Wenn sich deine Konsole aufhängt, schalte sie durch langes halten des Power-Knopfes aus, und versuche es erneut + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/de_DE/installing-boot9strap-(ssloth-browser).txt b/_pages/de_DE/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..64188355a1 --- /dev/null +++ b/_pages/de_DE/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### Was du brauchst + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Schritt I - Vorbereitungen + +1. Schalte deinen 3DS aus +1. Stecke deine SD-Karte in deinen Computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Stecke deine SD-Karte nun wieder in deinen 3DS +1. Schalte deine Konsole an + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Schalte deinen 3DS aus + +#### Section III - Launching SafeB9SInstaller +1. Schalte deine Konsole an +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Solltest du eine Fehlermeldung erhalten, [folge diesen Anweisungen](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. Wenn der Exploit erfolgreich war, wird nun direkt zum SafeBS9Installer gebootet + +#### Section IV - Installing boot9strap + +1. Warte auf alle Sicherheitsüberprüfungen +1. Gib die Tastenkombination zur Bestätigung ein, wenn danach verlangt wird +1. Sobald dies abgeschlossen ist drücke (A) um das Gerät neuzustarten + +#### Section V - Configuring Luma3DS + +1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen + + Wenn du einen schwarzen Bildschirm siehst, [Folge diesen Anweisungen](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren: + + **"Show NAND or user string in System Settings"** +1. Drücke (Start) zum Speichern und neustarten + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Schalte deinen 3DS aus + +___ + +### Fortfahren mit [Setup fertigstellen](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/de_DE/installing-boot9strap-(usm).txt b/_pages/de_DE/installing-boot9strap-(usm).txt index 2eea88181e..f014ba10a2 100644 --- a/_pages/de_DE/installing-boot9strap-(usm).txt +++ b/_pages/de_DE/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Inhalt" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Lesen erforderlich In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### Was du brauchst * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Schritt I - Vorbereitungen -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Stecke deine SD-Karte in deinen Computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Schritt IV - Luma3DS konfigurieren @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Schalte deinen 3DS aus 1. Stecke deine SD-Karte in deinen Computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/de_DE/legacy-methods.txt b/_pages/de_DE/legacy-methods.txt index a2cb46a99a..5c97a342ed 100644 --- a/_pages/de_DE/legacy-methods.txt +++ b/_pages/de_DE/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/de_DE/ntrboot.txt b/_pages/de_DE/ntrboot.txt index 867ca440a2..bad1e07e4f 100644 --- a/_pages/de_DE/ntrboot.txt +++ b/_pages/de_DE/ntrboot.txt @@ -17,23 +17,23 @@ Karten mit 'Time Bomb' sind nicht länger in der Lage '.nds' Dateien zu starten, | Flashcart Name | Derzeitiger Preis | "Time Bomb"? | 3DS Versionen? | DSi Versionen? | Anmerkungen | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013er Modelle sind nicht kompatibel. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013er Modelle sind nicht kompatibel. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013er Modelle sind nicht kompatibel. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013er Modelle sind nicht kompatibel. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | Nein | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | Nein | Keine | Keine | | | **R4i Gold 3DS Deluxe "Starter"** | | Nein | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | Nein | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/de_DE/region-changing.txt b/_pages/de_DE/region-changing.txt index 5c69b4b99d..511513723d 100644 --- a/_pages/de_DE/region-changing.txt +++ b/_pages/de_DE/region-changing.txt @@ -17,7 +17,7 @@ Beachte: Sollten noch weitere Dateien als nur die`GodMode9.firm` Datei im `/luma Durch diesen Vorgang wird die Verknüpfung deiner NNID mit der Konsole aufgehoben, da diese nicht mehr mit der neuen Region kompatibel ist. NNIDs sind an die Region der Konsole gebunden, mit der sie erstmalig erstellt wurden und können nur über [einen sehr komplexen Prozess](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt) zwischen den verschiedenen Regionen transferiert werden. {: .notice--warning} -Nach diesem Vorgang werden nur **New 3DS, welche den eShop noch nie zuvor besucht haben** und **alle Old 3DS** in der Lage sein den eShop zu besuchen, nachdem eine neue NNID in der neuen Region erstellt wurde. New 3DS, die schon einmal den eShop ihrer originalen Region besucht haben, können keine neue NNID erstellen und somit den eShop in der neuen Region nicht mehr besuchen! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Beachte, dass der eShop ab und zu, aus unerklärlichen Gründen auf Geräten, auf denen er eigentlich funktionieren sollte, nicht aufrufbar ist. Dies liegt komplett an den Serven von Nintendo. Ich habe darauf absolut keinen Einfluss. Ähnlich der oben stehenden Warnung, funktioniert der eShop unerwarteterweise ab und zu mal auf Geräten, auf denen er nicht funktionieren sollte (wie auf manchen New 3DS). Die Ursache hierfür ist derzeit unbekannt. @@ -55,12 +55,34 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um 1. Kopiere `FBI.3dsx` in den `/3ds/`-Ordner auf deiner SD-Karte 1. Stecke deine SD-Karte nun wieder in deinen 3DS -#### Schritt II - CTRTransfer - +#### Section II - NAND Backup 1. Starte GodMode9, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst 1. Wenn du aufgefordert wirst, ein "essential files backup" durchzuführen, drücke (A). Drücke erneut (A) nachdem es abgeschlossen ist 1. Wenn du aufgefordert wirst Datum und Uhrzeit der "RTC" (Real Time Clock, Echtzeituhr) zu korrigieren, drücke (A), stelle Datum und Uhrzeit ein und drücke (A) um fortzufahren + Bitte beachte, falls du die RTC korrigieren musstest, dass du nach beenden der Anleitung auch Datum und Uhrzeit in den Systemeinstellungen korrigieren musst +1. Drücke (HOME) um das Aktionsmenü aufzurufen +1. Wähle "Scripts" +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Drücke (A) um zu bestätigen + + Dieser Prozess kann einige Zeit in Anspruch nehmen + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Drücke (A) um fortzufahren +1. Drücke (B), um zum Hauptmenü zurückzukehren +1. Select "Exit" +1. Drücke (A), um die Schreibrechte zu deaktivieren, wenn du dazu aufgefordert wirst +1. Drücke (R) und (B) gleichzeitig um die SD-Karte auszuwerfen +1. Stecke deine SD-Karte in deinen Computer +1. Kopiere `__sysnand_###.bin` und `essential.exefs`vom `/gm9/out/`Ordner der SD-Karte an einen sicheren Ort auf deinem Rechner + + Erstelle Backup Dateien an mehreren Orten (USB-Stick, PC, Externe Festplatte, Online-Speicher, etc.) + + Diese Backups werden im Falle eines Bricks benötigt, um Daten aus dem NAND-Image wieder herzustellen, wenn etwas schief gehen sollte +1. Lösche `__sysnand_###.bin` und `__sysnand_###.bin.sha`aus dem `/gm9/out/` Ordner der SD-Karte nachdem du diese kopiert hast +1. Stecke deine SD-Karte nun wieder in deinen 3DS + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigiere zu `[0:] SDCARD` -> `gm9` 1. Drücke (A) auf der CTRTrasnfer `.bin`, um diese auszuwählen 1. Wähle "CTRNAND Options..." aus @@ -68,7 +90,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um 1. Sollte eine Aufforderung erscheinen, so wähle "Transfer to SysNAND" + Diese Aufforderung erscheint nur, wenn du eine EmuNAND besitzt 1. Drücke (A), um die SysNAND (Stufe 1) Bearbeitung zu aktivieren. Dann gebe die angegebene Tastenkombination ein - + Dieser Prozess kann einige Zeit in Anspruch nehmen + + Dieser Vorgang nimmt einige Zeit in Anspruch 1. Sobald der Transfer abgeschlossen wurde, drücke (A) um fortzufahren 1. Drücke (B), um die Schreibrechte nicht zu deaktiveren 1. Drücke zweimal (B), um zurück in das Hauptmenü zu gelangen @@ -87,7 +109,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um + Updates mit B9S + Luma (welches du hast) sind sicher + Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll -#### Schritt III - Starten von FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Drücke gleichzeitig (L) + (Steuerkreuz unten) + (Select) um das Rosalina Menü zu öffnen @@ -100,7 +122,7 @@ Du MUSST bereits eine installierte Version von Luma3DS und boot9straps haben, um 1. Starte die Download-Spiel Anwendung 1. Deine Konsole sollte den Homebrew Launcher laden -#### Schritt IV - Tickets wiederherstellen +#### Section V - Reinstalling Tickets Falls das Skript kein User-Ticket gefunden hat und dich anweist folgende Sektion zu überspringen, überspringe sie {: .notice--info} @@ -120,19 +142,19 @@ Falls das Skript kein User-Ticket gefunden hat und dich anweist folgende Sektion + Drücke (B) um das installieren der tickets vom CDN zu verweigern. 1. Drücke (HOME), um FBI zu verlassen -#### Schritt V - Regions-Einstellungen +#### Section VI - Region settings 1. Öffne die Systemeinstellungen 1. Gehe zu "Allgemeine Einstellungen", "Nutzereinstellungen", dann "Region wählen" 1. Wähle ein Land der Region, zu welcher du gewechselt hast 1. Falls aufgefordert, musst du keinen Staat einstellen -#### Schritt VI - CTRTransfer Abbild entfernen +#### Section VII - Remove CTRTransfer image 1. Starte GodMode9, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst 1. Navigiere zu `[0:] SDCARD` -> `gm9` 1. Drücke (X) auf die CTRTransfer-Abbild `.bin` um es zu löschen -1. Drücke (A) um zu bestätigen +1. Drücke (A), um zu bestätigen 1. Drücke (Start) um dein Gerät neu zu starten ___ diff --git a/_pages/de_DE/restoring-cfw.txt b/_pages/de_DE/restoring-cfw.txt new file mode 100644 index 0000000000..9a0c3d1ace --- /dev/null +++ b/_pages/de_DE/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Inhalt" %} + +### Lesen erforderlich + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### Was du brauchst +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Anleitung + +#### Schritt I - Vorbereitungen + +1. Stecke deine SD-Karte in deinen Computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Stecke deine SD-Karte nun wieder in deinen 3DS + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Benutze den (A) Knopf und das Steuerkreuz, um Folgendes zu aktivieren: + * **"Show NAND or user string in System Settings"** +1. Drücke (Start) zum Speichern und neustarten + +___ + +### Fortfahren mit [Setup fertigstellen](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/de_DE/seedminer.txt b/_pages/de_DE/seedminer.txt index 1beb1c3872..c0266de65a 100644 --- a/_pages/de_DE/seedminer.txt +++ b/_pages/de_DE/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Inhalt" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lesen erforderlich -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Anleitung -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Schritt I - Vorbereitungen 1. Stecke deine SD-Karte in deinen Computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Schalte deine Konsole an 1. Öffne deine Freundesliste (das [Icon mit dem orangenen Gesicht]({{ "/images/friend-list-icon.png" | absolute_url }}) in der obersten Zeile des Home-Menüs) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/de_DE/site-navigation.txt b/_pages/de_DE/site-navigation.txt index b6a70b38f5..e5e68acd2a 100644 --- a/_pages/de_DE/site-navigation.txt +++ b/_pages/de_DE/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Beliebt** + [Setup fertigstellen](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installation von boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Kartenupdate](cart-update) + [Danksagungen](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Spenden](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [ntrboot flashen (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [ntrboot flashen (DSi)](flashing-ntrboot-(dsi)) + [ntrboot flashen (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Los geht's](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Bedienung](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Startseite](/) + [Homebrew Launcher (Alternativen)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installation von boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installation von boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installation von boot9strap (MSET)](installing-boot9strap-(mset)) + [Installation von boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installation von boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [EmuNAND verschieben](move-emunand) + [ntrboot](ntrboot) + [Wechseln der Region](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Problembehandlung](troubleshooting) + [CFW deinstallieren](uninstall-cfw) + [B9S updaten](updating-b9s) diff --git a/_pages/de_DE/updating-b9s.txt b/_pages/de_DE/updating-b9s.txt index 872204c023..196e0322be 100644 --- a/_pages/de_DE/updating-b9s.txt +++ b/_pages/de_DE/updating-b9s.txt @@ -8,28 +8,14 @@ title: "B9S aktualisieren" Diese Seite ist für Nutzer, die bereits boot9strap nutzen, jedoch ihre Installation auf die aktuellste Version aktualisieren wollen. -{% capture notice-1 %} -Es gibt Berichte über eine Welle von Banns, die Nintendo an CFW-Nutzer aushändigt. Bevor du dieser Anleitung folgst, befolge diese Schritte, um dich selbst zu schützen: - -1. Gehe zu den System-Einstellungen, dann "Internet-Einstellungen", dann "SpotPass" und dann "Senden von System-Informationen" -1. Deaktiviere die Option "Senden von Systeminformationen an Nintendo" -1. Schließe die Systemeinstellungen -1. Öffne deine Freundesliste (das [Icon mit dem orangenen Gesicht]({{ "/images/friend-list-icon.png" | absolute_url }}) in der obersten Zeile des Home-Menüs) - + Wenn du eine Fehlermeldung bekommst und aus dem Menü rausgeschmissen wirst, wurde entweder die Einstellung für die Freundesliste deaktiviert oder die Konsole kann sich nicht mit den Nintendo Servern verbinden (wegen eines Banns oder Verbindungsproblemen) -1. Gehe zu den Einstellungen der Freundesliste, dann zu "Statusanzeige", dann "Freunden zeigen, was du spielst?" -1. Deaktiviere die Option "Freunden zeigen, was du spielst?" -1. Schließe die Freundesliste - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### Was du brauchst * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Anleitung @@ -39,7 +25,6 @@ Es gibt Berichte über eine Welle von Banns, die Nintendo an CFW-Nutzer aushänd {: .notice--info} 1. Stecke deine SD-Karte in deinen Computer -1. Kopiere die `boot.3dsx`-Datei in das Stammverzeichnis deiner SD-Karte 1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte 1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte 1. Kopiere `SafeB9SInstaller.firm` von der SafeB9SInstaller `.zip` in den `/luma/payloads/`-Ordner auf deiner SD-Karte @@ -58,7 +43,7 @@ Es gibt Berichte über eine Welle von Banns, die Nintendo an CFW-Nutzer aushänd 1. Schalte deinen 3DS aus 1. Stecke deine SD-Karte in deinen Computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Stecke deine SD-Karte nun wieder in deinen 3DS 1. Schalte deine Konsole an diff --git a/_pages/el_GR/a9lh-to-b9s.txt b/_pages/el_GR/a9lh-to-b9s.txt index 2ff8b65564..8a1a2e1d49 100644 --- a/_pages/el_GR/a9lh-to-b9s.txt +++ b/_pages/el_GR/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ Για να αποσυμπιέσετε τα επισυναπτόμενα αρχεία '.7z' , θα χρειαστείτε ένα πρόγραμμα αρχειοθέτησης όπως το [7-Zip](http://www.7-zip.org/) ή το [The Unarchiver](https://theunarchiver.com/). -Εάν έχετε ενεργοποιημένο PIN στο Luma3DS, το SafeB9SInstaller θα σας δώσει το σφάλμα "OTP Crypto Fail", εκτός αν απενεργοποιήσετε προσωρινά το PIN σας (μπορείτε να το ενεργοποιήσετε ξανά μετά την αναβάθμιση). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -Έχουν υπάρξει αναφορές για κύμα απαγόρευσης (ban) κονσόλας ή δικτύου σε χρήστες CFW από τη Nintendo. Για να προστατευτείτε, ακολουθήστε τα παρακάτω βήματα πριν την έναρξη αυτού του οδηγού: - -1. Μεταβείτε στις ρυθμίσεις συστήματος, στη συνέχεια στην επιλογή "Internet Settings", έπειτα "SpotPass", και μετά "Sending of System Information" -1. Απενεργοποιήστε την επιλογή "Sending of System Information" -1. Βγείτε από τις ρυθμίσεις του συστήματος -1. Μεταβείτε στο Friend List (το [πορτοκαλί πρόσωπο]({{ "/images/friend-list-icon.png" | absolute_url }}) στην πάνω σειρά του Home Menu) - Εάν λάβετε ένα σφάλμα και σας 'πετάξει' από το μενού, τότε η ρύθμιση Friend List έχει ήδη απενεργοποιηθεί ή η κονσόλα σας δεν μπορεί να συνδεθεί στους διακομιστές της Nintendo (λόγω απαγόρευσης κονσόλας ή προβλήματα σύνδεσης) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/el_GR/bannerbomb3.txt b/_pages/el_GR/bannerbomb3.txt index 30899e48c8..48d0a73838 100644 --- a/_pages/el_GR/bannerbomb3.txt +++ b/_pages/el_GR/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Πίνακας περιεχομένων" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/el_GR/checking-for-cfw.txt b/_pages/el_GR/checking-for-cfw.txt new file mode 100644 index 0000000000..e6cd646534 --- /dev/null +++ b/_pages/el_GR/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Πίνακας περιεχομένων" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/el_GR/credits.txt b/_pages/el_GR/credits.txt index a30aa906f9..96e5af50f6 100644 --- a/_pages/el_GR/credits.txt +++ b/_pages/el_GR/credits.txt @@ -2,6 +2,9 @@ title: "Συντελεστές" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Ευχαριστώ ιδιαίτερα όλο το [#Cakey στο Freenode](http://webchat.freenode.net/?channels=%23Cakey) που ήταν υπέροχοι!** {: .notice--primary} @@ -22,7 +25,7 @@ title: "Συντελεστές" + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ title: "Συντελεστές" + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ title: "Συντελεστές" + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/el_GR/dsidumper.txt b/_pages/el_GR/dsidumper.txt index 38ce18513d..9762798a6c 100644 --- a/_pages/el_GR/dsidumper.txt +++ b/_pages/el_GR/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Πίνακας περιεχομένων" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/el_GR/faq.txt b/_pages/el_GR/faq.txt index ea1940295a..922f4bb564 100644 --- a/_pages/el_GR/faq.txt +++ b/_pages/el_GR/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Ε:** *Πώς ενημερώνω το Luma3DS;* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** Όχι. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/el_GR/finalizing-setup.txt b/_pages/el_GR/finalizing-setup.txt index 2975bc2e74..b8cb9d3953 100644 --- a/_pages/el_GR/finalizing-setup.txt +++ b/_pages/el_GR/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -Σε αυτήν την περίπτωση, θα χρησιμοποιήσουμε το Luma3DS του χρήστη [AuroraWright](https://github.com/AuroraWright/) ώστε να εκκινήσουμε απευθείας μια επεξεργασμένη έκδοση της SysNAND, που μας επιτρέπει να παρακάμψουμε την ανάγκη για μια EmuNAND, απλοποιώντας έτσι την χρήση ενός χακαρισμένου 3DS και απελευθερώνοντας χώρο στην κάρτα SD. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Ταυτόχρονα, θα εγκαταστήσουμε προγράμματα όπως τα παρακάτω: + **FBI** *(Εγκαθιστά εφαρμογές και παιχνίδια που έχουν την μορφή CIA)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(ενημερώνει εύκολα την εγκατάσταση του CFW)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes 1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Δημιουργήστε έναν φάκελο με το όνομα `cias` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ήδη 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Μπορείτε να ενημερώσετε το Luma3DS, χρησιμοποιώντας το Luma3DS Updater, απλώς ανοίγοντάς το και πατώντας το (A). - -Δεν είναι το ίδιο με την Ενημέρωση Συστήματος· το μόνο που κάνει είναι να κατεβάσει και να αποσυμπιέσει τα τελευταία αρχεία του Luma3DS. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. Μπορείτε να πατήσετε (Select) κατά την εκκίνηση ώστε να ανοίξετε τις ρυθμίσεις του Luma3DS. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us Για πληροφορίες σχετικά με την χρήση του Luma3DS, επισκεφθείτε [το wiki του](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt index c82d16da21..1ece33da8a 100644 --- a/_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt b/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt index 982e820b3b..568f695477 100644 --- a/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/el_GR/flashing-ntrboot-(nds).txt b/_pages/el_GR/flashing-ntrboot-(nds).txt index 11a2a04b45..18daed4f16 100644 --- a/_pages/el_GR/flashing-ntrboot-(nds).txt +++ b/_pages/el_GR/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/el_GR/formatting-sd-(linux).txt b/_pages/el_GR/formatting-sd-(linux).txt new file mode 100644 index 0000000000..ecd089de1d --- /dev/null +++ b/_pages/el_GR/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Πίνακας περιεχομένων" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Αυτή η σελίδα είναι μόνο για χρήστες Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/el_GR/formatting-sd-(mac).txt b/_pages/el_GR/formatting-sd-(mac).txt new file mode 100644 index 0000000000..fed68156e2 --- /dev/null +++ b/_pages/el_GR/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Πίνακας περιεχομένων" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Αυτή η σελίδα είναι μόνο για χρήστες Mac. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/el_GR/formatting-sd-(windows).txt b/_pages/el_GR/formatting-sd-(windows).txt new file mode 100644 index 0000000000..7459fd74c9 --- /dev/null +++ b/_pages/el_GR/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Πίνακας περιεχομένων" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Αυτή η σελίδα είναι μόνο για χρήστες Windows. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/el_GR/get-started-(new-3ds).txt b/_pages/el_GR/get-started-(new-3ds).txt index 80a31a15e4..db423600c3 100644 --- a/_pages/el_GR/get-started-(new-3ds).txt +++ b/_pages/el_GR/get-started-(new-3ds).txt @@ -2,67 +2,53 @@ title: "Get Started (New 3DS)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Πίνακας περιεχομένων" %} ### Required Reading -Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToΑπόΈωςAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/el_GR/get-started-(old-3ds).txt b/_pages/el_GR/get-started-(old-3ds).txt index 4c6e2a94e1..1e405fb01a 100644 --- a/_pages/el_GR/get-started-(old-3ds).txt +++ b/_pages/el_GR/get-started-(old-3ds).txt @@ -2,25 +2,20 @@ title: "Get Started (Old 3DS)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Πίνακας περιεχομένων" %} ### Required Reading -Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Εάν η έκδοση είναι -0 τότε δεν έχετε πρόγραμμα περιήγησης, ενώ κάθε αριθμός πάνω από το -0 υποδεικνύει ότι υπάρχει εγκατεστημένο πρόγραμμα περιήγησης. - -Στην περίπτωση της έκδοσης "5.0.0-0U" για παράδειγμα, θα ακολουθούσατε την στήλη "Χωρίς Πρόγραμμα Περιήγησης" και τη σειρά 5.0.0 έως 5.1.1, διότι το σύστημα είναι στην έκδοση εκείνης της εμβέλειας και δεν έχει πρόγραμμα περιήγησης εγκατεστημένο. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Από ΈωςΧωρίς Πρόγραμμα ΠεριήγησηςΜε Πρόγραμμα ΠεριήγησηςAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/el_GR/get-started.txt b/_pages/el_GR/get-started.txt index ad5d882946..3049b6d546 100644 --- a/_pages/el_GR/get-started.txt +++ b/_pages/el_GR/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. Note that the "from" and "to" fields are inclusive. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Εάν έχετε ήδη χακάρει το 3DS σας πριν και έχετε ήδη μια εγκατάσταση CFW βασισμένη σε emuNAND, απλώς ακολουθήστε τις οδηγίες ενώ βρίσκεστε στη SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Πριν αρχίσετε, συνιστάται να ελέγξετε την κάρτα SD για σφάλματα χρησιμοποιώντας το [H2testw (Windows)](h2testw-(windows)), το [F3 (Linux)](f3-(linux)), ή το [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ΑπόΈωςAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/el_GR/godmode9-usage.txt b/_pages/el_GR/godmode9-usage.txt index 97bac08f58..aa7d9f0a2d 100644 --- a/_pages/el_GR/godmode9-usage.txt +++ b/_pages/el_GR/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Πίνακας περιεχομένων" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/el_GR/home.txt b/_pages/el_GR/home.txt index 5745d32c56..7ab8b3a5e8 100644 --- a/_pages/el_GR/home.txt +++ b/_pages/el_GR/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## Τι μπορείτε να κάνετε με το Custom Firmware; + Να παίξετε όλες τις κασέτες παιχνιδιών και παιχνίδια μέσω eShop, ανεξαρτήτου περιοχής -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Χρήση "ROM hacks" για παιχνίδια που ήδη έχετε στην κατοχή σας + Να κάνετε λήψη στιγμιότυπου του παιχνιδιού και εφαρμογών + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Προτού ξεκινήσετε τον οδηγό, θα πρέπει να ξέρετε τους κινδύνους πίσω από το hacking του 3DS: ΚΑΘΕ φορά που τροποποιείτε το σύστημά σας, υπάρχει πάντα η πιθανότητα ΟΛΟΣΧΕΡΗΣ ΑΧΡΗΣΤΕΥΣΗΣ ΤΗΣ ΣΥΣΚΕΥΗΣ ΣΑΣ. Αυτό συμβαίνει σπάνια, όμως υπάρχει ακόμα η πιθανότητα γι΄αυτό βεβαιωθείτε ότι ακολουθείτε πιστά ΟΛΕΣ τις οδηγίες ΑΚΡΙΒΩΣ.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Εάν όλα πάνε σύμφωνα με το σχέδιο, δεν θα χάσετε τα δεδομένα σας και θα καταλήξετε με όλα όσα ξεκινήσατε (παιχνίδια, NNID, saves, κλπ. θα διατηρηθούν). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/el_GR/homebrew-launcher-(browserhax-2020).txt b/_pages/el_GR/homebrew-launcher-(browserhax-2020).txt index c06bc3818b..487f25a45c 100644 --- a/_pages/el_GR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/el_GR/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Πίνακας περιεχομένων" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/el_GR/homebrew-launcher-(pichaxx).txt b/_pages/el_GR/homebrew-launcher-(pichaxx).txt index 138487be79..ff08ea54fd 100644 --- a/_pages/el_GR/homebrew-launcher-(pichaxx).txt +++ b/_pages/el_GR/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Πίνακας περιεχομένων" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/el_GR/homebrew-launcher-(soundhax).txt b/_pages/el_GR/homebrew-launcher-(soundhax).txt index 606a89f4aa..d9983cd45f 100644 --- a/_pages/el_GR/homebrew-launcher-(soundhax).txt +++ b/_pages/el_GR/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Θα χρειαστείτε μία [εναλλακτική μέθοδο](homebrew-launcher-(εναλλακτικές)) για να εισέλθετε στο Ηomebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Θα χρειαστείτε μία [εναλλακτική μέθοδο](homebrew-launcher-(εναλλακτικές)) για να εισέλθετε στο Ηomebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/el_GR/homebrew-launcher-(steelhax).txt b/_pages/el_GR/homebrew-launcher-(steelhax).txt index 7671af852d..65ec1b9a69 100644 --- a/_pages/el_GR/homebrew-launcher-(steelhax).txt +++ b/_pages/el_GR/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Πίνακας περιεχομένων" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/el_GR/installing-boot9strap-(browser).txt b/_pages/el_GR/installing-boot9strap-(browser).txt index b4fe8b9b87..7edccb52ba 100644 --- a/_pages/el_GR/installing-boot9strap-(browser).txt +++ b/_pages/el_GR/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Πίνακας περιεχομένων" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση - + If you get an error, just continue the next page ___ diff --git a/_pages/el_GR/installing-boot9strap-(fredtool).txt b/_pages/el_GR/installing-boot9strap-(fredtool).txt index 5ec51d895c..a6429bfb12 100644 --- a/_pages/el_GR/installing-boot9strap-(fredtool).txt +++ b/_pages/el_GR/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Πίνακας περιεχομένων" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/el_GR/installing-boot9strap-(frogtool).txt b/_pages/el_GR/installing-boot9strap-(frogtool).txt index 9b221a9b34..4616c07f79 100644 --- a/_pages/el_GR/installing-boot9strap-(frogtool).txt +++ b/_pages/el_GR/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Πίνακας περιεχομένων" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ This is a currently working implementation of the "FIRM partitions known-plainte * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Εισάγετε την κάρτα SD στον υπολογιστή σας 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/el_GR/installing-boot9strap-(hardmod).txt b/_pages/el_GR/installing-boot9strap-(hardmod).txt index ca7c629467..f9f326a739 100644 --- a/_pages/el_GR/installing-boot9strap-(hardmod).txt +++ b/_pages/el_GR/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/el_GR/installing-boot9strap-(hbl-usm).txt b/_pages/el_GR/installing-boot9strap-(hbl-usm).txt index 476e9d46bb..a42d09cecd 100644 --- a/_pages/el_GR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/el_GR/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Πίνακας περιεχομένων" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/el_GR/installing-boot9strap-(ntrboot).txt b/_pages/el_GR/installing-boot9strap-(ntrboot).txt index f356ec6452..57dd987524 100644 --- a/_pages/el_GR/installing-boot9strap-(ntrboot).txt +++ b/_pages/el_GR/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ title: "Installing boot9strap (ntrboot)" * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/el_GR/installing-boot9strap-(pichaxx).txt b/_pages/el_GR/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..6e9368b304 --- /dev/null +++ b/_pages/el_GR/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Πίνακας περιεχομένων" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/el_GR/installing-boot9strap-(safecerthax).txt b/_pages/el_GR/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..791cc5ed79 --- /dev/null +++ b/_pages/el_GR/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Πίνακας περιεχομένων" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/el_GR/installing-boot9strap-(soundhax).txt b/_pages/el_GR/installing-boot9strap-(soundhax).txt index 4768e7ad74..0e1a55bfa0 100644 --- a/_pages/el_GR/installing-boot9strap-(soundhax).txt +++ b/_pages/el_GR/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Μεταβείτε στο `/SDCARD`, στην συνέχεια παίξτε το "<3 nedwill 2016" + Μπορεί να χρειαστούν αρκετές προσπάθειες - + Εάν παγώσει, επιβάλλετε το κλείσιμο της κονσόλας κρατώντας πατημένο το κουμπί ενεργοποίησης και δοκιμάστε ξανά + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/el_GR/installing-boot9strap-(ssloth-browser).txt b/_pages/el_GR/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ab55ab74d5 --- /dev/null +++ b/_pages/el_GR/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Πίνακας περιεχομένων" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/el_GR/installing-boot9strap-(usm).txt b/_pages/el_GR/installing-boot9strap-(usm).txt index 6d5b0bf217..8639cae2c2 100644 --- a/_pages/el_GR/installing-boot9strap-(usm).txt +++ b/_pages/el_GR/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Πίνακας περιεχομένων" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Εισάγετε την κάρτα SD στον υπολογιστή σας 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/el_GR/legacy-methods.txt b/_pages/el_GR/legacy-methods.txt index a5ab0d79a6..f0294f28af 100644 --- a/_pages/el_GR/legacy-methods.txt +++ b/_pages/el_GR/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/el_GR/ntrboot.txt b/_pages/el_GR/ntrboot.txt index f51b4acab7..634798499a 100644 --- a/_pages/el_GR/ntrboot.txt +++ b/_pages/el_GR/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/el_GR/region-changing.txt b/_pages/el_GR/region-changing.txt index 1d16a4cab3..b74e753616 100644 --- a/_pages/el_GR/region-changing.txt +++ b/_pages/el_GR/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma Αυτή η διαδικασία θα αποσυνδέσει το NNID σας από το σύστημα, καθώς δεν θα είναι πλέον συμβατό με αυτό. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. New 3DS τα οποία είχαν χρησιμοποιήσει το eShop στην αρχική περιοχή της συσκευής δεν μπορούν να δημιουργήσουν καινούργιο NNID και να αποκτήσουν πρόσβαση στο eShop στην καινούργια περιοχή! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Σημειώστε ότι σποραδικά το eShop δεν θα λειτουργεί, χωρίς λόγο, σε συσκευές στις οποίες θα έπρεπε. Έχει να κάνει αποκλειστικά με του διακομιστές της Nintendo και δεν μπορώ να έχω καθόλου έλεγχο, όσον αφορά αυτό το θέμα. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Η αιτία γι' αυτό είναι, προς το παρόν, άγνωστη. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Πατήστε (A) για επιβεβαίωση + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Πατήστε (A) για να συνεχίσετε +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Κρατήστε πατημένο το (R) και πατήστε ταυτόχρονα το (B) για να αφαιρέσετε την κάρτα SD +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Μεταβείτε στο "Other Settings", "Profile" και έπειτα στο "Region Settings" 1. Επιλέξτε την χώρα της περιοχής από την οποία αλλάξατε 1. Εάν σας ζητηθεί, δεν είναι αναγκαίο να δηλώσετε πολιτεία -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/el_GR/restoring-cfw.txt b/_pages/el_GR/restoring-cfw.txt new file mode 100644 index 0000000000..939fb1ac19 --- /dev/null +++ b/_pages/el_GR/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Πίνακας περιεχομένων" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Εισάγετε την κάρτα SD στον υπολογιστή σας +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Πατήστε (Start) για αποθήκευση των αλλαγών και επανεκκίνηση + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/seedminer.txt b/_pages/el_GR/seedminer.txt index b7b8d8ff14..332d1fd834 100644 --- a/_pages/el_GR/seedminer.txt +++ b/_pages/el_GR/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Πίνακας περιεχομένων" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Εισάγετε την κάρτα SD στον υπολογιστή σας 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Μεταβείτε στο Friend List (το [πορτοκαλί πρόσωπο]({{ "/images/friend-list-icon.png" | absolute_url }}) στην πάνω σειρά του Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/el_GR/site-navigation.txt b/_pages/el_GR/site-navigation.txt index ba66af378f..a3e35b36d1 100644 --- a/_pages/el_GR/site-navigation.txt +++ b/_pages/el_GR/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Δημοφιλή** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Ευχαριστίες](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Δωρεές](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Ας αρχίσουμε](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Εναλλακτικές)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Μετακίνηση της EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Αλλαγή Περιοχής](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Αντιμετώπιση Προβλημάτων](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/el_GR/updating-b9s.txt b/_pages/el_GR/updating-b9s.txt index 6f3c747516..e7798f151e 100644 --- a/_pages/el_GR/updating-b9s.txt +++ b/_pages/el_GR/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -Έχουν υπάρξει αναφορές για κύμα απαγόρευσης (ban) κονσόλας ή δικτύου σε χρήστες CFW από τη Nintendo. Για να προστατευτείτε, ακολουθήστε τα παρακάτω βήματα πριν την έναρξη αυτού του οδηγού: - -1. Μεταβείτε στις ρυθμίσεις συστήματος, στη συνέχεια στην επιλογή "Internet Settings", έπειτα "SpotPass", και μετά "Sending of System Information" -1. Απενεργοποιήστε την επιλογή "Sending of System Information" -1. Βγείτε από τις ρυθμίσεις του συστήματος -1. Μεταβείτε στο Friend List (το [πορτοκαλί πρόσωπο]({{ "/images/friend-list-icon.png" | absolute_url }}) στην πάνω σειρά του Home Menu) - Εάν λάβετε ένα σφάλμα και σας 'πετάξει' από το μενού, τότε η ρύθμιση Friend List έχει ήδη απενεργοποιηθεί ή η κονσόλα σας δεν μπορεί να συνδεθεί στους διακομιστές της Nintendo (λόγω απαγόρευσης κονσόλας ή προβλήματα σύνδεσης) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Εισάγετε την κάρτα SD στον υπολογιστή σας -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/en_PT/a9lh-to-b9s.txt b/_pages/en_PT/a9lh-to-b9s.txt index 4d11b31035..9a8373a376 100644 --- a/_pages/en_PT/a9lh-to-b9s.txt +++ b/_pages/en_PT/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If ye have set a PIN on Luma3DS, ye gunna be needin' to disable ye PIN temporarily, or else SafeB9SInstaller gunna give ye th' error "OTP Crypto Fail." Ye can re-enable th' PIN after th' update. +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports 'o a wave 'o bans bein' handed out to CFW users by Nintendo. Fer ye protection, please be followin' these steps before startin' 'tis guide: - -1. Be off to System Settin's, then "Internet Setttings", then "SpotPass", then "Sending of System Information" -1. Disable th' "Sending of System Information" option -1. Be out 'o th' System Settin's -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable th' "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that th' followin' required file, named `secret_sector.bin`, be th' same one that was found in th' various `data_input.zip` file versions. If ye already have that file on ye hard disk somewhere, ye can be usin' that one instead 'o downloadin' th' one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card. 1. Power off ye device 1. Insert ye SD card into ye computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existin' `.bin` payloads in th' `/luma/payloads/` folder on ye SD card, as they gunna be incompatible wit' boot9strap Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/en_PT/bannerbomb3.txt b/_pages/en_PT/bannerbomb3.txt index b2fcdddeda..c4b74b1606 100644 --- a/_pages/en_PT/bannerbomb3.txt +++ b/_pages/en_PT/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/en_PT/checking-for-cfw.txt b/_pages/en_PT/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/en_PT/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/en_PT/credits.txt b/_pages/en_PT/credits.txt index 0ecfafb56f..8f728e4a36 100644 --- a/_pages/en_PT/credits.txt +++ b/_pages/en_PT/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot ye here, be contactin' me 'n I gunna be addin' ye name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot ye here, be contactin' me 'n I gunna be addin' ye name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot ye here, be contactin' me 'n I gunna be addin' ye name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/en_PT/dsidumper.txt b/_pages/en_PT/dsidumper.txt index e59b211350..9762798a6c 100644 --- a/_pages/en_PT/dsidumper.txt +++ b/_pages/en_PT/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off ye device -1. Insert ye SD card into ye computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert ye SD card into ye device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/en_PT/faq.txt b/_pages/en_PT/faq.txt index edd90251df..1e55f8cf37 100644 --- a/_pages/en_PT/faq.txt +++ b/_pages/en_PT/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap be a superior method 'o loadin' hax that be runnin' early in boot. diff --git a/_pages/en_PT/finalizing-setup.txt b/_pages/en_PT/finalizing-setup.txt index 5f2381ddb2..8ab5633d55 100644 --- a/_pages/en_PT/finalizing-setup.txt +++ b/_pages/en_PT/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizin' Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Durin' 'tis process, we also setup programs such as th' followin': + **FBI** *(installs CIA formatted games 'n applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates ye CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ Durin' 'tis process, we also setup programs such as th' followin': * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ Durin' 'tis process, we also setup programs such as th' followin': 1. Power off ye device 1. Insert ye SD card into ye computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on th' root 'o ye SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to th' `/3ds/` folder on ye SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to th' `/cias/` folder on ye SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from th' GodMode9 `.zip` to th' `/luma/payloads/` folder on ye SD card 1. Copy th' `gm9` folder from th' GodMode9 `.zip` to th' root 'o ye SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off ye device -1. Launch GodMode9 by holdin' (Start) durin' boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If ye be prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If ye be prompted to fix th' RTC date&time, press (A) to do so, then set th' date 'n time, then press (A) to continue 1. Press (Home) to bring up th' action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Ye can now use Luma3DS Updater to update ye Luma3DS to th' latest version just by openin' it 'n pressin' (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. Ye can now hold (Select) on boot to launch th' Luma3DS configuration menu. @@ -177,7 +168,7 @@ Ye can now be pressin' (L) + (Down) + (Select) while ye device be booted up to o {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us Fer information on usin' Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt b/_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt index 10dc8da26f..4bfd55d11c 100644 --- a/_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare cases, it may be possible fer th' flashin' process to **b * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt b/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt index 924a22a937..f6a54cac09 100644 --- a/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare cases, it may be possible fer th' flashin' process to **b ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/en_PT/flashing-ntrboot-(nds).txt b/_pages/en_PT/flashing-ntrboot-(nds).txt index 62fba96bae..203278248e 100644 --- a/_pages/en_PT/flashing-ntrboot-(nds).txt +++ b/_pages/en_PT/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible fer th' flashin' proces * Two devices + **Th' source NDS / NDSL**: th' Nintendo DS or Nintendo DS Lite which be compatible wit' ye flashcart + **Th' target 3DS**: th' 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/en_PT/formatting-sd-(linux).txt b/_pages/en_PT/formatting-sd-(linux).txt new file mode 100644 index 0000000000..bd59ddfba6 --- /dev/null +++ b/_pages/en_PT/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +'Tis page be fer Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/en_PT/formatting-sd-(mac).txt b/_pages/en_PT/formatting-sd-(mac).txt new file mode 100644 index 0000000000..58d92032c8 --- /dev/null +++ b/_pages/en_PT/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +'Tis page be fer Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert ye SD card into ye computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert ye SD card into ye computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/en_PT/formatting-sd-(windows).txt b/_pages/en_PT/formatting-sd-(windows).txt new file mode 100644 index 0000000000..0131931896 --- /dev/null +++ b/_pages/en_PT/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +'Tis page be fer Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert ye SD card into ye computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/en_PT/get-started-(new-3ds).txt b/_pages/en_PT/get-started-(new-3ds).txt index 5221d44c8c..9f97c26ec6 100644 --- a/_pages/en_PT/get-started-(new-3ds).txt +++ b/_pages/en_PT/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive. 'Tis means that, fer example, th' "from 9.0.0 to 9.2.0" row be includin' 9.0.0, 9.1.0, 'n 9.2.0. - -Additionally, note that th' last number 'o ye system version (which follows th' dash) be referrin' to ye browser version. Currently, th' browser version be irrelevant to th' New 3DS in 'tis guide. - -**If ye be unable to follow th' instructions correspondin' to ye specific version due to any missin' prerequisites, then ye should see th' "All Versions" row for methods that work regardless 'o ye system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive. Ye device version can be found at th' bottom right 'o th' top screen 'o th' System Settin's. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installin' boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Needs a Compatible Flashcart)

or

Installin' boot9strap (Hardmod)
(Needs Solderin')

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/en_PT/get-started-(old-3ds).txt b/_pages/en_PT/get-started-(old-3ds).txt index c51456e617..d1416c44d4 100644 --- a/_pages/en_PT/get-started-(old-3ds).txt +++ b/_pages/en_PT/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive. 'Tis means that, fer example, th' "from 9.0.0 to 9.2.0" row be includin' 9.0.0, 9.1.0, 'n 9.2.0. - -Additionally, note that th' last two columns 'o th' chart refer to th' last number 'o ye version (which be correspondin' to th' browser version installed to th' system). If th' version be -0 then ye do not have a browser, while any number above -0 indicates a browser be installed. - -In th' case 'o "5.0.0-0U" fer example, ye would follow th' "No Browser" column 'n 5.0.0 to 5.1.0 row because th' system be on th' a system version in that range 'n has no browser installed. - -**If ye be unable to follow th' instructions correspondin' to ye specific version due to any missin' prerequisites, then ye should see th' "All Versions" row for methods that work regardless 'o ye system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive. Ye device version can be found at th' bottom right 'o th' top screen 'o th' System Settin's. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Ye device version can be found at th' bottom right 'o th' top screen 'o th' Syst - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Needs a Compatible Flashcart)

or

Installin' boot9strap (Hardmod)
(Needs Solderin')

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/en_PT/get-started.txt b/_pages/en_PT/get-started.txt index ac37aee155..a7240e762e 100644 --- a/_pages/en_PT/get-started.txt +++ b/_pages/en_PT/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select th' appropriate page fer ye version from th' chart below. Note that th' "from" 'n "to" fields be inclusive. 'Tis means that, fer example, th' "from 9.0.0 to 9.2.0" row be includin' 9.0.0, 9.1.0, 'n 9.2.0. - -Ye device version can be found at th' bottom right 'o th' top screen 'o th' System Settin's. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If ye have already hacked ye 3DS before 'n be havin' an EmuNAND based CFW setup, jus' follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before startin', ye may want to check ye SD card fer errors usin' [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/en_PT/godmode9-usage.txt b/_pages/en_PT/godmode9-usage.txt index 7006f5d47a..272010a360 100644 --- a/_pages/en_PT/godmode9-usage.txt +++ b/_pages/en_PT/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/en_PT/home.txt b/_pages/en_PT/home.txt index ee4cded2ba..9c74e3f9c8 100644 --- a/_pages/en_PT/home.txt +++ b/_pages/en_PT/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do wit' Custom Firmware? + Play all game cards 'n eShop games, regardless 'o region -+ Customize ye HOME Menu wit' user-created [themes 'n splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" fer games that ye own + Take gameplay 'n application screenshots + Back up, edit, 'n restore saves fer many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginnin' th' guide, ye must be knowin' th' risks 'o 3DS hackin': EVERY time ye be modifyin' ye system, there be always th' potential fer an UNRECOVERABLE brick. They be rare, but still a possibility so make sure ye follow ALL directions EXACTLY.** + If ye have already hacked ye 3DS before to get an EmuNAND setup, 'n would like to move th' contents 'o ye previous EmuNAND to ye new SysNAND CFW, ye should follow all instructions 'n be restorin' ye existin' EmuNAND when prompted once ye reach [Finalizin' Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everythin' goes accordin' to plan, ye gunna lose no data 'n be endin' up wit' everythin' that ye started wit' (games, NNID, saves, etc gunna be preserved). + Keep ye device plugged in 'n charged throughout th' entire process to avoid data loss or damage from an unexpected power-off! + Ye SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (th' SD card that comes wit' ye device gunna be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/en_PT/homebrew-launcher-(browserhax-2020).txt b/_pages/en_PT/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/en_PT/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/en_PT/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/en_PT/homebrew-launcher-(pichaxx).txt b/_pages/en_PT/homebrew-launcher-(pichaxx).txt index 9b92853c0c..0a211f51db 100644 --- a/_pages/en_PT/homebrew-launcher-(pichaxx).txt +++ b/_pages/en_PT/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert ye SD card into ye device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off ye device ___ diff --git a/_pages/en_PT/homebrew-launcher-(soundhax).txt b/_pages/en_PT/homebrew-launcher-(soundhax).txt index 43a079711b..5560c0242a 100644 --- a/_pages/en_PT/homebrew-launcher-(soundhax).txt +++ b/_pages/en_PT/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Ye gunna be needin' an [alternate method](homebrew-launcher-(alternatives)) 'o enterin' th' Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Ye gunna be needin' an [alternate method](homebrew-launcher-(alternatives)) 'o enterin' th' Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/en_PT/homebrew-launcher-(steelhax).txt b/_pages/en_PT/homebrew-launcher-(steelhax).txt index 0551527e45..65ec1b9a69 100644 --- a/_pages/en_PT/homebrew-launcher-(steelhax).txt +++ b/_pages/en_PT/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off ye device -1. Insert ye SD card into ye computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert ye SD card into ye device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/en_PT/installing-boot9strap-(browser).txt b/_pages/en_PT/installing-boot9strap-(browser).txt index 4a267b5b2c..3d8fa8529d 100644 --- a/_pages/en_PT/installing-boot9strap-(browser).txt +++ b/_pages/en_PT/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off ye device 1. Insert ye SD card into ye computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on th' root 'o ye SD card -1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert ye SD card into ye device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use th' (A) button 'n th' D-Pad to turn on th' followin': + **"Show NAND or user string in System Settings"** 1. Press (Start) to save 'n reboot - + If ye be gettin' an error, jus' continue to th' next page ___ diff --git a/_pages/en_PT/installing-boot9strap-(fredtool).txt b/_pages/en_PT/installing-boot9strap-(fredtool).txt index b9e596f2d9..5b5472c72b 100644 --- a/_pages/en_PT/installing-boot9strap-(fredtool).txt +++ b/_pages/en_PT/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert ye SD card into ye device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off ye device 1. Insert ye SD card into ye computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert ye SD card into ye device 1. Power on your device diff --git a/_pages/en_PT/installing-boot9strap-(frogtool).txt b/_pages/en_PT/installing-boot9strap-(frogtool).txt index ad4a60a8a6..9b60e45aa4 100644 --- a/_pages/en_PT/installing-boot9strap-(frogtool).txt +++ b/_pages/en_PT/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert ye SD card into ye computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert ye SD card into ye device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save 'n reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Ye device should be loadin' th' Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/en_PT/installing-boot9strap-(hardmod).txt b/_pages/en_PT/installing-boot9strap-(hardmod).txt index 642a6d6d8a..f37e246481 100644 --- a/_pages/en_PT/installing-boot9strap-(hardmod).txt +++ b/_pages/en_PT/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/en_PT/installing-boot9strap-(hbl-usm).txt b/_pages/en_PT/installing-boot9strap-(hbl-usm).txt index 35ffef23d9..a42d09cecd 100644 --- a/_pages/en_PT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/en_PT/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use th' (A) button 'n th' D-Pad to turn on th' followin': - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save 'n reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Ye device should be loadin' th' Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/en_PT/installing-boot9strap-(ntrboot).txt b/_pages/en_PT/installing-boot9strap-(ntrboot).txt index cc467beeaa..b7d91149c7 100644 --- a/_pages/en_PT/installing-boot9strap-(ntrboot).txt +++ b/_pages/en_PT/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers th' sleep mode 'o ye device (if ye be usin' a foldin' style one) * Ye ntrboot-flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Set th' sails (prep work) 1. Power off ye device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on th' root 'o ye SD card -1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert ye SD card into ye device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/en_PT/installing-boot9strap-(pichaxx).txt b/_pages/en_PT/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..7cc7531885 --- /dev/null +++ b/_pages/en_PT/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off ye device +1. Insert ye SD card into ye computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on th' root 'o ye SD card +1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert ye SD card into ye device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait fer all safety checks to be completed +1. When prompted, input th' key combo given to be installin' boot9strap +1. Once it has completed, press (A) to be rebootin' ye device + +#### Section IV - Configuring Luma3DS + +1. Ye device should have rebooted into th' Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use th' (A) button 'n th' D-Pad to turn on th' followin': + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save 'n reboot + + If ye be gettin' an error, jus' continue to th' next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/en_PT/installing-boot9strap-(safecerthax).txt b/_pages/en_PT/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..bfca574a3e --- /dev/null +++ b/_pages/en_PT/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off ye device +1. Insert ye SD card into ye computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on th' root 'o ye SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert ye SD card into ye device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off ye device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait fer all safety checks to be completed +1. When prompted, input th' key combo given to be installin' boot9strap +1. Once it has completed, press (A) to be rebootin' ye device + +#### Section V - Configuring Luma3DS + +1. Ye device should have rebooted into th' Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use th' (A) button 'n th' D-Pad to turn on th' followin': + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save 'n reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off ye device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/en_PT/installing-boot9strap-(soundhax).txt b/_pages/en_PT/installing-boot9strap-(soundhax).txt index 93811d1a34..738300a1c5 100644 --- a/_pages/en_PT/installing-boot9strap-(soundhax).txt +++ b/_pages/en_PT/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off ye device 1. Insert ye SD card into ye computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on th' root 'o ye SD card 1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert ye SD card into ye device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/en_PT/installing-boot9strap-(ssloth-browser).txt b/_pages/en_PT/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..aed28ac140 --- /dev/null +++ b/_pages/en_PT/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off ye device +1. Insert ye SD card into ye computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on th' root 'o ye SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert ye SD card into ye device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off ye device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait fer all safety checks to be completed +1. When prompted, input th' key combo given to be installin' boot9strap +1. Once it has completed, press (A) to be rebootin' ye device + +#### Section V - Configuring Luma3DS + +1. Ye device should have rebooted into th' Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use th' (A) button 'n th' D-Pad to turn on th' followin': + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save 'n reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off ye device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/en_PT/installing-boot9strap-(usm).txt b/_pages/en_PT/installing-boot9strap-(usm).txt index 8702ccb89d..207af9907c 100644 --- a/_pages/en_PT/installing-boot9strap-(usm).txt +++ b/_pages/en_PT/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert ye SD card into ye computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off ye device 1. Insert ye SD card into ye computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/en_PT/legacy-methods.txt b/_pages/en_PT/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/en_PT/legacy-methods.txt +++ b/_pages/en_PT/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/en_PT/ntrboot.txt b/_pages/en_PT/ntrboot.txt index c56d849461..79b8338810 100644 --- a/_pages/en_PT/ntrboot.txt +++ b/_pages/en_PT/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/en_PT/region-changing.txt b/_pages/en_PT/region-changing.txt index 43869d4eef..c8e004c6da 100644 --- a/_pages/en_PT/region-changing.txt +++ b/_pages/en_PT/region-changing.txt @@ -17,7 +17,7 @@ Note that if ye have any payload files other than `GodMode9.firm` in th' `/luma/ This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis. 1. Copy `FBI.3dsx` to th' `/3ds/` folder on ye SD card 1. Reinsert ye SD card into ye device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holdin' (Start) durin' boot 1. If ye be prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If ye be prompted to fix th' RTC date&time, press (A) to do so, then set th' date 'n time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up th' action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + 'Tis process gunna be takin' some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert ye SD card into ye computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups gunna be savin' ye from any brick, 'n they may help ye recover files, especially th' NAND image, if anythin' be off or wrong in th' future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert ye SD card into ye device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on th' CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis. + Updates while usin' B9S + Luma (what ye have) be safe + If 'tis gives ye an error, set ye DNS settin's to "auto" -#### Section III - Launchin' FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at th' same time to be openin' th' Rosalina menu @@ -100,7 +122,7 @@ Ye MUST have already installed Luma3DS 'n boot9strap to be usin' 'tis. 1. Launch th' Download Play application 1. Ye device should be loadin' th' Homebrew Launcher -#### Section IV - Reinstallin' Tickets +#### Section V - Reinstalling Tickets If th' script found no user tickets 'n told ye to skip 'tis section, then skip 'tis section {: .notice--info} @@ -120,14 +142,14 @@ If th' script found no user tickets 'n told ye to skip 'tis section, then skip ' + Press (B) to decline installin' tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holdin' (Start) durin' boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/en_PT/restoring-cfw.txt b/_pages/en_PT/restoring-cfw.txt new file mode 100644 index 0000000000..91b0c04c45 --- /dev/null +++ b/_pages/en_PT/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert ye SD card into ye computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert ye SD card into ye device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use th' (A) button 'n th' D-Pad to turn on th' followin': + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save 'n reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/en_PT/seedminer.txt b/_pages/en_PT/seedminer.txt index b117269571..f6001513e1 100644 --- a/_pages/en_PT/seedminer.txt +++ b/_pages/en_PT/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert ye SD card into ye computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/en_PT/site-navigation.txt b/_pages/en_PT/site-navigation.txt index 7f418cb97c..6f846245b3 100644 --- a/_pages/en_PT/site-navigation.txt +++ b/_pages/en_PT/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizin' Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Gimme Ye Gold](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/en_PT/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installin' boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installin' boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installin' boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changin'](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshootin'](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updatin' B9S](updating-b9s) diff --git a/_pages/en_PT/updating-b9s.txt b/_pages/en_PT/updating-b9s.txt index 931f7bd563..3d46e68da1 100644 --- a/_pages/en_PT/updating-b9s.txt +++ b/_pages/en_PT/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updatin' B9S" 'Tis page be fer existin' boot9strap users to be updatin' their installation 'o boot9strap to th' latest version. -{% capture notice-1 %} -There have been reports 'o a wave 'o bans bein' handed out to CFW users by Nintendo. Fer ye protection, please be followin' these steps before startin' 'tis guide: - -1. Be off to System Settin's, then "Internet Setttings", then "SpotPass", then "Sending of System Information" -1. Disable th' "Sending of System Information" option -1. Be out 'o th' System Settin's -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable th' "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card. {: .notice--info} 1. Insert ye SD card into ye computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on th' root 'o ye SD card 1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card 1. Copy `SafeB9SInstaller.firm` from th' SafeB9SInstaller `.zip` to th' `/luma/payloads/` folder on ye SD card @@ -58,7 +43,7 @@ Fer all steps in 'tis section, overwrite any existin' files on ye SD card. 1. Power off ye device 1. Insert ye SD card into ye computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert ye SD card into ye device 1. Power on your device diff --git a/_pages/en_US/a9lh-to-b9s.txt b/_pages/en_US/a9lh-to-b9s.txt index 60eaed476f..ec52109ad7 100644 --- a/_pages/en_US/a9lh-to-b9s.txt +++ b/_pages/en_US/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/en_US/bannerbomb3.txt b/_pages/en_US/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/en_US/bannerbomb3.txt +++ b/_pages/en_US/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/en_US/checking-for-cfw.txt b/_pages/en_US/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/en_US/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/en_US/credits.txt b/_pages/en_US/credits.txt index e66f591db9..c30986407b 100644 --- a/_pages/en_US/credits.txt +++ b/_pages/en_US/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/en_US/ctrtransfer.txt b/_pages/en_US/ctrtransfer.txt index cf2c059aad..f58e9a9fa0 100644 --- a/_pages/en_US/ctrtransfer.txt +++ b/_pages/en_US/ctrtransfer.txt @@ -46,7 +46,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. #### Section II - CTRTransfer -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide @@ -111,7 +111,7 @@ If script found no user tickets told you to skip this section, then skip this se #### Section V - Remove CTRTransfer image -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (X) on the CTRTransfer image `.bin` to delete it 1. Press (A) to confirm diff --git a/_pages/en_US/dsidumper.txt b/_pages/en_US/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/en_US/dsidumper.txt +++ b/_pages/en_US/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/en_US/faq.txt b/_pages/en_US/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/en_US/faq.txt +++ b/_pages/en_US/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/en_US/finalizing-setup.txt b/_pages/en_US/finalizing-setup.txt index 90f49a797f..ce8ce02d93 100644 --- a/_pages/en_US/finalizing-setup.txt +++ b/_pages/en_US/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -66,7 +67,7 @@ If, before following this guide, you already had an EmuNAND setup and would like + Updates while using B9S + Luma (what you have) are safe + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section + If this gives you an error, set your DNS settings to "auto" - + If this still gives you an error, [follow CTRTransfer](ctrtransfer), then try updating again + + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#system-update-error-after-installing-cfw) #### Section III - Homebrew Launcher @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/en_US/flashing-ntrboot-(3ds-multi-system).txt b/_pages/en_US/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/en_US/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/en_US/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/en_US/flashing-ntrboot-(3ds-single-system).txt b/_pages/en_US/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/en_US/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/en_US/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/en_US/flashing-ntrboot-(nds).txt b/_pages/en_US/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/en_US/flashing-ntrboot-(nds).txt +++ b/_pages/en_US/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/en_US/formatting-sd-(linux).txt b/_pages/en_US/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/en_US/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/en_US/formatting-sd-(mac).txt b/_pages/en_US/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/en_US/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/en_US/formatting-sd-(windows).txt b/_pages/en_US/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/en_US/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/en_US/get-started-(new-3ds).txt b/_pages/en_US/get-started-(new-3ds).txt new file mode 100644 index 0000000000..65bd5f0197 --- /dev/null +++ b/_pages/en_US/get-started-(new-3ds).txt @@ -0,0 +1,54 @@ +--- +title: "Get Started (New 3DS)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. + +Your device version can be found at the bottom right of the top screen of the System Settings. + +![]({{ "/images/screenshots/system-version.png" | absolute_url }}) +{: .notice--info} + +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + +### Version Table + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
FromToAction
1.0.011.3.0Installing boot9strap (Soundhax)
11.4.011.13.0Installing boot9strap (SSLoth-Browser)
11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

diff --git a/_pages/en_US/get-started-(old-3ds).txt b/_pages/en_US/get-started-(old-3ds).txt new file mode 100644 index 0000000000..2dbfd6b915 --- /dev/null +++ b/_pages/en_US/get-started-(old-3ds).txt @@ -0,0 +1,50 @@ +--- +title: "Get Started (Old 3DS)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. + +Your device version can be found at the bottom right of the top screen of the System Settings. + +![]({{ "/images/screenshots/system-version.png" | absolute_url }}) +{: .notice--info} + +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + +### Version Table + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
FromToAction
1.0.011.3.0Installing boot9strap (Soundhax)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

diff --git a/_pages/en_US/get-started.txt b/_pages/en_US/get-started.txt index 824816730c..a7240e762e 100644 --- a/_pages/en_US/get-started.txt +++ b/_pages/en_US/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/en_US/godmode9-usage.txt b/_pages/en_US/godmode9-usage.txt index 99014ce114..89e2388827 100644 --- a/_pages/en_US/godmode9-usage.txt +++ b/_pages/en_US/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading @@ -34,7 +34,7 @@ Some of the instructions below are only applicable to the latest version of GodM ## Creating a NAND Backup -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Press (Home) to bring up the action menu 1. Select "Scripts..." 1. Select "GM9Megascript" @@ -58,7 +58,7 @@ Some of the instructions below are only applicable to the latest version of GodM ## Restoring a NAND Backup -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Hold (R) and press (B) at the same time to eject your SD card 1. Insert your SD card into your computer 1. Copy `__sysnand_###.bin` from your computer to the `/gm9/out/` folder on your SD card @@ -85,7 +85,7 @@ For organizational purposes, copy the `.cia` file you wish to inject to the `/ci Note that it is not possible to inject files into Health & Safety that are larger than it (including games and other large applications) {: .notice--info} -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Navigate to `[0:] SDCARD` -> `cias` 1. Press (A) on your `.cia` to select it, then select "CIA image options...", then select "Mount image to drive" 1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S" @@ -98,7 +98,7 @@ Note that it is not possible to inject files into Health & Safety that are large This will only work if the Health & Safety injection was performed by GodMode9 (not Decrypt9 or Hourglass9). {: .notice--info} -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Press (Home) to bring up the action menu 1. Select "More..." 1. Select "Restore H&S" @@ -115,7 +115,7 @@ Insert the game cartridge you intend to dump into your device
{{ notice | markdownify }}
-1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Navigate to `[C:] GAMECART` 1. Follow the steps applicable to your game cartridge: + **3DS Game Cartridge:** Press (A) on `[TitleID].trim.3ds` to select it, then select "NCSD image options...", then select "Build CIA from file" @@ -124,7 +124,7 @@ Insert the game cartridge you intend to dump into your device ## Dumping a Title -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Hover over the drive applicable to the type of title you wish to dump: + **User Installed Title**: `[A:] SYSNAND SD` + **System Title**: `[1:] SYSNAND CTRNAND` @@ -143,7 +143,7 @@ Insert the game cartridge you intend to dump into your device
{{ notice | markdownify }}
-1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Navigate to `[0:] SDCARD` -> `cias` 1. Press (A) on your `.3ds` file to select it, then select "NCSD image options...", then select "Build CIA from file" 1. Your installable `.cia` formatted file will be outputted to the `/gm9/out/` folder on your SD card @@ -223,7 +223,7 @@ For organizational purposes, copy each `.cia` file you wish to encrypt / decrypt ## Removing an NNID without formatting your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Press (Home) to bring up the action menu 1. Select "Scripts..." 1. Select "GM9Megascript" diff --git a/_pages/en_US/home.txt b/_pages/en_US/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/en_US/home.txt +++ b/_pages/en_US/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/en_US/homebrew-launcher-(browserhax-2020).txt b/_pages/en_US/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/en_US/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/en_US/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/en_US/homebrew-launcher-(pichaxx).txt b/_pages/en_US/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/en_US/homebrew-launcher-(pichaxx).txt +++ b/_pages/en_US/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/en_US/homebrew-launcher-(soundhax).txt b/_pages/en_US/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/en_US/homebrew-launcher-(soundhax).txt +++ b/_pages/en_US/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/en_US/homebrew-launcher-(steelhax).txt b/_pages/en_US/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/en_US/homebrew-launcher-(steelhax).txt +++ b/_pages/en_US/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/en_US/installing-boot9strap-(browser).txt b/_pages/en_US/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/en_US/installing-boot9strap-(browser).txt +++ b/_pages/en_US/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/en_US/installing-boot9strap-(fredtool).txt b/_pages/en_US/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/en_US/installing-boot9strap-(fredtool).txt +++ b/_pages/en_US/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/en_US/installing-boot9strap-(frogtool).txt b/_pages/en_US/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/en_US/installing-boot9strap-(frogtool).txt +++ b/_pages/en_US/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/en_US/installing-boot9strap-(hardmod).txt b/_pages/en_US/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/en_US/installing-boot9strap-(hardmod).txt +++ b/_pages/en_US/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/en_US/installing-boot9strap-(hbl-usm).txt b/_pages/en_US/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/en_US/installing-boot9strap-(hbl-usm).txt +++ b/_pages/en_US/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/en_US/installing-boot9strap-(ntrboot).txt b/_pages/en_US/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/en_US/installing-boot9strap-(ntrboot).txt +++ b/_pages/en_US/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/en_US/installing-boot9strap-(pichaxx).txt b/_pages/en_US/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/en_US/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/en_US/installing-boot9strap-(safecerthax).txt b/_pages/en_US/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/en_US/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/en_US/installing-boot9strap-(soundhax).txt b/_pages/en_US/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/en_US/installing-boot9strap-(soundhax).txt +++ b/_pages/en_US/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/en_US/installing-boot9strap-(ssloth-browser).txt b/_pages/en_US/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/en_US/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/en_US/installing-boot9strap-(usm).txt b/_pages/en_US/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/en_US/installing-boot9strap-(usm).txt +++ b/_pages/en_US/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/en_US/legacy-methods.txt b/_pages/en_US/legacy-methods.txt deleted file mode 100644 index f5cf03e567..0000000000 --- a/_pages/en_US/legacy-methods.txt +++ /dev/null @@ -1,46 +0,0 @@ ---- -title: "Legacy Methods" ---- - -{% include toc title="Table of Contents" %} - -### Required Reading - -There have been multiple improvements and advancements to methods for installing CFW over the last short while. - -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. - -However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. - -If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. - -#### Section I - Compatibility Test - -The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. - -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. - -#### DS Internet Settings Test (used for Fredtool) - -1. Go to System Settings, then "Internet Settings", then "Nintendo DS Connections" -1. Press "OK" -1. If your device loads into a "Nintendo Wi-Fi Connection Setup" menu, the test was successful - + If the screen stays black or appears to freeze, the test has failed -1. Exit this menu - -#### DS Download Play Test (used for Frogtool) - -1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) -1. Select "Nintendo DS" -1. If your device loads into a “Download software via DS Download Play” menu, the test was successful - + If the screen stays black or appears to freeze, the test has failed -1. Exit this menu - -___ - -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons -1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool - + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool - + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/en_US/ntrboot.txt b/_pages/en_US/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/en_US/ntrboot.txt +++ b/_pages/en_US/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/en_US/region-changing.txt b/_pages/en_US/region-changing.txt index 75af6091cf..d83fe783f5 100644 --- a/_pages/en_US/region-changing.txt +++ b/_pages/en_US/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - -1. Launch GodMode9 by holding (Start) during boot +#### Section II - NAND Backup +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,16 +142,16 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (X) on the CTRTransfer image `.bin` to delete it 1. Press (A) to confirm diff --git a/_pages/en_US/restoring-cfw.txt b/_pages/en_US/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/en_US/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/en_US/seedminer.txt b/_pages/en_US/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/en_US/seedminer.txt +++ b/_pages/en_US/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/en_US/site-navigation.txt b/_pages/en_US/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/en_US/site-navigation.txt +++ b/_pages/en_US/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/en_US/troubleshooting.txt b/_pages/en_US/troubleshooting.txt index c559032d00..06080dc9f7 100644 --- a/_pages/en_US/troubleshooting.txt +++ b/_pages/en_US/troubleshooting.txt @@ -44,7 +44,8 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this This is caused by Gateway implementing a very shoddy downgrade method which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one. -1. Launch GodMode9 by holding (Start) during boot +1. Power off your device +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Navigate to `[1:] SYSNAND CTRNAND` -> `title` -> `00040010` 1. Navigate to the folder for your device and region: + **Old 3DS or Old 2DS EUR**: `00022300` -> `content` @@ -85,7 +86,7 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras 1. When the home menu appears, reinsert your SD card into your device 1. If this worked, you should clear Home Menu's extdata by following these instructions: 1. Power off your device - 1. Launch GodMode9 by holding (Start) during boot + 1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Press (Home) to bring up the action menu 1. Select "Scripts..." 1. Select "GM9Megascript" @@ -132,7 +133,7 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras 1. On Luma3DS, hold (Start) on boot 1. Try deleting home menu's extdata by following these instructions: 1. Power off your device - 1. Launch GodMode9 by holding (Start) during boot + 1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Press (Home) to bring up the action menu 1. Select "Scripts..." 1. Select "GM9Megascript" @@ -155,3 +156,17 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras 1. Your device is bricked 1. You will need to get an ntrboot-comptible flashcart (one of the ones on [this list](ntrboot) or a [hardmod](https://gbatemp.net/threads/414498/), or repair / replace your device 1. For support (in English), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) + +## System update error after installing CFW + + Occasionally, updates may fail to install after installing CFW. To fix this, reboot your device after each step of this section, then try updating again. + +1. Set your DNS settings to "Auto" +1. Move closer to your WiFi router +1. Update from Safe Mode by turning off the console, holding (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) on boot, and following the on-screen prompts +1. Delete your WiFi connection, then reconnect to your WiFi again +1. Reboot your WiFi router +1. Connect to a different WiFi connection, like a mobile hotspot +1. Nintendo servers may be down; Try again later +1. If you still get an error, [follow CTRTransfer](ctrtransfer), then try again +1. For support (in English), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) diff --git a/_pages/en_US/uninstall-cfw.txt b/_pages/en_US/uninstall-cfw.txt index c95c74b398..18540f1216 100644 --- a/_pages/en_US/uninstall-cfw.txt +++ b/_pages/en_US/uninstall-cfw.txt @@ -60,7 +60,7 @@ If either of these tests has failed, DS mode, DS Download Play, and/or DS Connec #### Section III - Safety Test The purpose of this section is to verify that the console will boot and that critical system functions, like System Settings and the keyboard, will work once CFW is uninstalled. **If you skip this section, you may BRICK your device!** -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after following this guide @@ -84,7 +84,7 @@ If you do NOT boot into the regular 3DS Home Menu, or System Settings / your key #### Section IV - NAND Backup -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Press (Home) to bring up the action menu 1. Select "Scritps..." 1. Select "GM9Megascript" @@ -125,10 +125,12 @@ This section will ensure that all illegitimate tickets are removed, allowing eSh 1. Navigate to Other Settings -> Next Page (until the final page) -> Format System Memory 1. Follow the prompts to format your 3DS + #### Section VII - Running Uninstall Script This is your final opportunity to verify that all safety steps above have been followed! Please ensure that you have followed all sections on this page, **especially** `Section III - Safety Test`, before continuing. {: .notice--warning} -1. Launch GodMode9 by holding (Start) during boot + +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Press (Home) to bring up the action menu 1. Select "Scripts..." 1. Select "GM9Megascript" diff --git a/_pages/en_US/updating-b9s.txt b/_pages/en_US/updating-b9s.txt index 84d8eb17f1..7bc0a5a605 100644 --- a/_pages/en_US/updating-b9s.txt +++ b/_pages/en_US/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/es_ES/a9lh-to-b9s.txt b/_pages/es_ES/a9lh-to-b9s.txt index 58783b386f..6061fcd862 100644 --- a/_pages/es_ES/a9lh-to-b9s.txt +++ b/_pages/es_ES/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ Para utilizar los enlaces [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) Para extraer los archivos `.7z` enlazados esta página, necesitarás un gestor de archivos como [7-Zip](http://www.7-zip.org/) o [The Unarchiver](https://theunarchiver.com/). -Si tienes un PIN activado en Luma3DS, SafeB9SInstaller te dará el error "OTP Crypto Fail", a menos que desactives temporalmente tu PIN (lo puedes volver a activar luego de actualizar). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -Ha habido reportes de olas de baneos a usuarios de CFW por parte de Nintendo. Para protegerte, puedes realizar los siguientes pasos antes de seguir esta guía: - -1. Ve a Configuración de la consola, luego a "Configuración de internet", luego "Envío de información sobre la consola" -1. Desactiva la opción "Envío de información sobre la consola" -1. Sal de la Configuración de la consola -1. Ve a tu Lista de Amigos (el [Icono Naranja con una cara]({{ "/images/friend-list-icon.png" | absolute_url }}) en la fila superior de tu Menú HOME) - + Si recibes un error y eres expulsado del menú, la configuración de la Lista de Amigos ya ha sido deshabilitada o tu consola no se puede conectar a los servidores de Nintendo (debido a un ban o por problemas de conexión) -1. Ve a la configuración de la Lista de amigos, luego a "Notificaciones entre amigos", y luego "Mostrar qué estás jugando" -1. Desactiva la opción "Mostrar qué estás jugando" -1. Sal de tu Lista de amigos - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### Qué necesitas Ten en cuenta que el archivo requerido llamado `secret_sector.bin` es el mismo que se encuentra en varias versiones del archivo `data_input.zip`. Si ya tienes ese archivo en alguna parte de tu disco, puedes usar ese en vez de descargar el que está más abajo. @@ -42,11 +26,10 @@ Ten en cuenta que sólo en la New 3DS, `secret_sector.bin` es requerido para rev {: .notice--info} * - **Sólo para New 3DS:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La versión v7.0.5 de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(el archivo`.7z`)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* -* La última versión [del Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instrucciones @@ -57,8 +40,7 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo repetido e 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copia `boot.3dsx` a la raíz de tu tarjeta SD -1. Copia el archivo `boot.firm` desde el `.zip` de la última versión de Luma3DS a la raíz de tu tarjeta SD +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copia `arm9loaderhax.bin` desde el `.7z` de Luma3DS v7.0.5 a la raíz de tu tarjeta SD 1. Elimina cualquier payload `.bin` de la carpeta `/luma/payloads/` en tu tarjeta SD ya que no serán compatibles con versiones de boot9strap compatibles con Luma3DS 1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la carpeta`/luma/payloads/` en tu tarjeta SD diff --git a/_pages/es_ES/bannerbomb3.txt b/_pages/es_ES/bannerbomb3.txt index b0b7fa4aee..31c48d9202 100644 --- a/_pages/es_ES/bannerbomb3.txt +++ b/_pages/es_ES/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Tabla de contenidos" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectura requerida Para volcar una aplicación DSiWare del sistema, aprovecharemos un fallo en la ventana de Gestión de datos DSiWare de la aplicación Configuración. @@ -17,7 +20,7 @@ Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y * Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer) #### Sección I - BannerBomb3 -1. Abre [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) en tu computadora +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Carga tu movable.sed usando la opción "Choose File" 1. Haz click en "Go" + Esto descargará un DSiWare vulnerable llamado `F00D43D5.bin` dentro de un archivo zip (`tadmuffin_out.zip`) diff --git a/_pages/es_ES/checking-for-cfw.txt b/_pages/es_ES/checking-for-cfw.txt new file mode 100644 index 0000000000..596e7b0148 --- /dev/null +++ b/_pages/es_ES/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instrucciones + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/es_ES/credits.txt b/_pages/es_ES/credits.txt index c1aca2255d..46febd67db 100644 --- a/_pages/es_ES/credits.txt +++ b/_pages/es_ES/credits.txt @@ -2,6 +2,9 @@ title: "Créditos" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **¡Un agradecimiento especial a todos los de [#Cakey en Freenode](http://webchat.freenode.net/?channels=%23Cakey) por ser asombrosos!** {: .notice--primary} @@ -23,7 +26,7 @@ Si te olvidé, puedes contactarme para añadir tu nombre. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -36,6 +39,7 @@ Si te olvidé, puedes contactarme para añadir tu nombre. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -47,12 +51,12 @@ Si te olvidé, puedes contactarme para añadir tu nombre. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/es_ES/dsidumper.txt b/_pages/es_ES/dsidumper.txt index 389b1bc7c3..9762798a6c 100644 --- a/_pages/es_ES/dsidumper.txt +++ b/_pages/es_ES/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Tabla de contenidos" %} - -### Lectura requerida - -Para volcar el DSiWare de sistema, utilizamos un exploit de homebrew launcher existente. - -Si durante esta guía te encontraste con una aplicación de Configuración de internet de DS que no funciona, sigue [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) antes de continuar - -### Qué necesitas - -* Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer) -* La última versión de [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Sección I - Preparativos - -1. Apaga tu consola -1. Inserta tu tarjeta SD en tu computadora -1. Copia tu archivo `movable.sed` a la raíz de tu tarjeta SD -1. Copia `DSiWare_Dump.3dsx` a la carpeta `/3ds/` en tu tarjeta SD -1. Vuelve a insertar tu tarjeta SD en tu consola -1. Enciende tu consola - -#### Sección II - Volcado de DSiWare - -1. Abre el Homebrew Launcher usando cualquier método -1. Inicia DSiWare Dumper desde la lista de homebrew - + Esto volcará una aplicación DSiWare a la raíz de la SD - + Es normal ver varios errores. -1. Cuando muestra "Success", este es el archivo que usarás para la copia de seguridad de DSiWare más adelante en la guía - -Continúa en [Instalar boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/es_ES/faq.txt b/_pages/es_ES/faq.txt index b1134d5586..bf5cbb4de0 100644 --- a/_pages/es_ES/faq.txt +++ b/_pages/es_ES/faq.txt @@ -6,7 +6,7 @@ title: "Preguntas Frecuentes" **R:** Si **P:** *¿Cómo actualizo Luma3DS?* -**A:** Usa [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **P:** *Me han hablado de esta cosa que vale dinero (Gateway, Sky3DS, etc). ¿Es algo que necesito?* **R:** No. boot9strap es un método superior de carga de hax que se ejecuta al iniciarse la consola. diff --git a/_pages/es_ES/finalizing-setup.txt b/_pages/es_ES/finalizing-setup.txt index c54cf1fb54..5a80fbd0f7 100644 --- a/_pages/es_ES/finalizing-setup.txt +++ b/_pages/es_ES/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizar instalación" El archivo `boot.firm` es el que ejecuta boot9strap después de que termina de cargarse desde la NAND, y puede ser cualquier payload arm9 válido en formato FIRM. Este archivo puede ser reemplazado en cualquier momento, a pesar de que Luma3DS permite la ejecución de otros payloads arm9 en formato FIRM usando el selector de payloads de Luma3DS. -En este caso, utilizamos Luma3DS de [AuroraWright](https://github.com/AuroraWright/) para ejecutar al inicio un SysNAND modificado directamente, permitiéndonos saltar la necesidad de cualquier EmuNAND, simplificando enormemente el uso de una 3DS hackeada además de ahorrar espacio en la tarjeta SD. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Durante este proceso, también instalaremos programas como los siguientes: + **FBI** *(instala juegos y aplicaciones en formato CIA)* + **Anemone3DS** *(instala temas personalizados)* + **Checkpoint** *(permite respaldar y restaurar archivos de guardado de juegos de 3DS y DS)* -+ **Luma3DS Updater** *(actualiza tu instalación de CFW fácilmente)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(herramienta multipropósito que puede realizar funciones sobre la NAND y cartridges)* + **Homebrew Launcher Loader** *(inicia el Homebrew Launcher)* **DSP1** *(permite que las aplicaciones homebrew tengan sonido)* @@ -25,12 +25,12 @@ Durante este proceso, también instalaremos programas como los siguientes: * La última versión de [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(el archivo `.cia`)* * La última versión de [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(el archivo `.cia`)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * La última versión de [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * La versión v1.9.2pre1 de [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* La última versión de [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * La última versión de [FBI](https://github.com/Steveice10/FBI/releases/latest) *(los archivos `.cia` y `.3dsx`)* * La última versión de [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* La última versión de [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(el archivo `.cia`)* ### Instrucciones @@ -39,15 +39,16 @@ Durante este proceso, también instalaremos programas como los siguientes: 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora 1. Crea una carpeta llamada `3ds` en la raíz de tu tarjeta SD, si aún no existe + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Crea una carpeta llamada `cias` en la raíz de tu tarjeta SD, si aún no existe 1. Copia `ctr-no-timeoffset.3dsx` a la carpeta `/3ds/` en tu tarjeta SD 1. Copia `FBI.3dsx` a la carpeta `/3ds/` de tu tarjeta SD 1. Copia `Homebrew_Launcher.cia` a la carpeta `/cias/` en tu tarjeta SD -1. Copia `lumaupdater.cia` a la carpeta `/cias/` en tu tarjeta SD 1. Copia `FBI.cia` a la carpeta `/cias/` en tu tarjeta SD 1. Copia `DSP1.cia` a la carpeta `/cias/` en tu tarjeta SD 1. Copia `Anemone3DS.cia` a la carpeta `/cias/` en tu tarjeta SD 1. Copia `Checkpoint.cia` a la carpeta `/cias/` en tu tarjeta SD +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Crea una carpeta llamada `payloads` dentro de la carpeta `luma` en tu tarjeta SD si aún no existe 1. Copia el archivo `GodMode9.firm` desde el `.zip` de GodMode9 a la carpeta `/luma/payloads/` en tu tarjeta SD 1. Copia la carpeta `gm9`contenida en el `.zip`de GodMode9 al directorio raíz de tu tarjeta SD @@ -102,7 +103,7 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m #### Sección VI - CTRNAND Luma3DS 1. Apaga tu consola -1. Inicia GodMode9 manteniendo presionado (Start) mientras enciendes la consola +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Si se te pide crear copias de seguridad de archivos esenciales, presiona (A) para hacerlo y luego presiona (A) para continuar una vez que haya terminado 1. Si se te pide fijar la fecha y hora RTC, presiona (A) para hacerlo, luego define la fecha y la hora, y después presiona (A) para continuar 1. Presiona el botón (Home) para abrir el menú de acción @@ -150,18 +151,8 @@ ___ #### Información y notas -{% capture notice-10 %} -Ahora ya puedes usar Luma3DS Updater para actualizar tu Luma3DS a la última versión con tan solo abrirlo y presionar (A). - -No es lo mismo que las actualizaciones de sistema, sólo descarga y extrae los archivos de Luma3DS más recientes. - -Esto actualizará los archivos de Luma3DS en tu tarjeta SD y en CTRNAND, que es lo que se inicia cuando tu consola no tiene una tarjeta SD insertada. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Ahora se iniciará el CFW Luma3DS en la SysNAND por defecto. +You will now boot Luma3DS CFW by default. Ahora puedes mantener pulsado (Select) mientras la consola arranca para acceder al menú de configuración de Luma3DS. @@ -177,7 +168,7 @@ Ahora puedes presionar (L) + (Abajo) + (Select) al encender la consola para abri {% capture notice-6 %} Si quisieras actualizar a una tarjeta SD de mayor capacidad, todo lo que debes hacer es formatearla como FAT32 para luego copiar y pegar el contenido de la tarjeta SD antigua en la tarjeta SD nueva. -Si tu nueva tarjeta SD tiene una capacidad superior a 32GB, deberás usar una herramienta de formateo distinta, como [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) para Windows, [gparted](http://gparted.org/download.php) para Linux, o la [Utilidad de Discos](https://support.apple.com/es-cl/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) para Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Para obtener información sobre el uso de las diversas funciones de GodMode9, co Para información sobre el uso de diversas características de Luma3DS, Revisa [su wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) (en inglés). {: .notice--success} -Para más información en cómo instalar temas personalizados y pantallas splash, revisa [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} Para obtener información sobre el uso de *cheat codes* de Gateshark en Luma3DS, echa un vistazo a [Checkpoint](https://github.com/FlagBrew/Checkpoint) (en inglés). diff --git a/_pages/es_ES/flashing-ntrboot-(3ds-multi-system).txt b/_pages/es_ES/flashing-ntrboot-(3ds-multi-system).txt index bc546da1e6..0075fef87f 100644 --- a/_pages/es_ES/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/es_ES/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flas * Dos consolas de la familia 3DS + **La 3DS de origen**: la consola de la familia 3DS que ya tiene boot9strap instalado + **3DS de destino**: la consola sin modificar -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(el archivo `ntr`; no el archivo `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * La última versión de [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instrucciones diff --git a/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt b/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt index dfd6388f9e..01823a4a54 100644 --- a/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flas ### Qué necesitas * Tu flashcart compatible con ntrboot -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(el archivo `ntr`; no el archivo `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * La última versión de [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instrucciones diff --git a/_pages/es_ES/flashing-ntrboot-(nds).txt b/_pages/es_ES/flashing-ntrboot-(nds).txt index 871f4190f7..0638e741ad 100644 --- a/_pages/es_ES/flashing-ntrboot-(nds).txt +++ b/_pages/es_ES/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flas * Dos consolas + **La NDS / NDSL de origen**: una Nintendo DS o Nintendo DS Lite compatible con tu flashcart + **3DS de destino**: la consola de la familia 3DS sin modificar -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(el archivo `ntr`; no el archivo `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * La última versión de [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instrucciones diff --git a/_pages/es_ES/formatting-sd-(linux).txt b/_pages/es_ES/formatting-sd-(linux).txt new file mode 100644 index 0000000000..0f8f58dbca --- /dev/null +++ b/_pages/es_ES/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Esta página es solo para usuarios de Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instrucciones +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/es_ES/formatting-sd-(mac).txt b/_pages/es_ES/formatting-sd-(mac).txt new file mode 100644 index 0000000000..2ef6224469 --- /dev/null +++ b/_pages/es_ES/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Esta página es sólo para usuarios de Mac. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instrucciones + +#### OS X El Capitan (10.11) and later + +1. Inserta tu tarjeta SD en tu computadora +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Inserta tu tarjeta SD en tu computadora +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/es_ES/formatting-sd-(windows).txt b/_pages/es_ES/formatting-sd-(windows).txt new file mode 100644 index 0000000000..e71c327e0d --- /dev/null +++ b/_pages/es_ES/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Esta página es sólo para usuarios de Windows. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Qué necesitas + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instrucciones + +1. Inserta tu tarjeta SD en tu computadora +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/es_ES/get-started-(new-3ds).txt b/_pages/es_ES/get-started-(new-3ds).txt index a0f1317afa..60ca6b9f14 100644 --- a/_pages/es_ES/get-started-(new-3ds).txt +++ b/_pages/es_ES/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Comencemos (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="Tabla de contenidos" %} ### Lectura requerida -Selecciona la casilla apropiada para tu versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0. - -Adicionalmente, ten en cuenta que el último número de la versión de tu sistema (que está precedida por un guión) se refiere a la versión de tu navegador. Actualmente, la versión del navegador es irrelevante para la New 3DS en esta guía. - -**Si no puedes seguir las instrucciones correspondientes a tu versión específica debido a falta de requisitos, deberías ver la fila de "Todas las versiones" para los métodos que funcionan independiente de la versión de la consola.** - -Para todas las versiones, también puedes [actualizar mediante cartucho](cart-update) (o utiliza una actualización de sistema estándar) a una versión superior de la misma columna para seguir esas instrucciones. +Selecciona la casilla apropiada para su versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. La versión de tu consola puede verse en la esquina inferior derecha de la pantalla superior en la Configuración de la consola. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Tabla de versiones - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
DesdeHasta DesdeHastaAcción
2.1.02.1.0Instalar boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Instalar boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Utiliza un método para "Todas las versiones"11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Instalar boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
TODAS LAS VERSIONES

ntrboot
(Requiere una flashcart compatible)

or

Instalar boot9strap (Hardmod)
(Requiere soldar)

ntrboot
(Requiere un Flashcart Compatible)

or

Instalar boot9strap (Hardmod)
(Requiere soldar)
diff --git a/_pages/es_ES/get-started-(old-3ds).txt b/_pages/es_ES/get-started-(old-3ds).txt index 8fdb83d4fe..3f5aaa8f79 100644 --- a/_pages/es_ES/get-started-(old-3ds).txt +++ b/_pages/es_ES/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "Comencemos (Old 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="Tabla de contenidos" %} ### Lectura requerida -Selecciona la casilla apropiada para su versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0. - -Adicionalmente, ten en cuenta que las dos últimas columnas de la tabla se refieren al último número de tu versión (que corresponde con la versión del navegador instalada en el sistema). Si la versión es -0 entonces no tienes navegador, mientras que cualquier número por encima de -0 indica que tienes el navegador instalado. - -En el caso de "5.0.0-0U" por ejemplo, escogerías la columna de "Sin Navegador" y la fila de 5.0.0 hasta 5.1.0 porque tu sistema está en una versión comprendida entre ese rango y no tienes navegador instalado. - -**Si no puedes seguir las instrucciones correspondientes a tu versión específica debido a falta de requisitos, deberías ver la fila de "Todas las versiones" para los métodos que funcionan independiente de la versión de la consola.** - -Para todas las versiones, también puedes [actualizar mediante cartucho](cart-update) (o utiliza una actualización de sistema estándar) a una versión superior de la misma columna para seguir esas instrucciones. +Selecciona la casilla apropiada para su versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. La versión de tu consola puede verse en la esquina inferior derecha de la pantalla superior en la Configuración de la consola. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Tabla de versiones @@ -33,49 +28,23 @@ La versión de tu consola puede verse en la esquina inferior derecha de la panta - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Desde HastaSin NavegadorCon NavegadorAcción
1.0.02.0.0Utiliza un método para "Todas las versiones"
2.1.02.1.0Utiliza un método para "Todas las versiones"Instalar boot9strap (2xrsa)
2.2.02.2.0Utiliza un método para "Todas las versiones"
3.0.08.1.0Instalar boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Utiliza un método para "Todas las versiones"Instalar boot9strap (Soundhax)
11.8.011.8.0Instalar boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
TODAS LAS VERSIONES

ntrboot
(Requiere una flashcart compatible)

or

Instalar boot9strap (Hardmod)
(Requiere soldar)

ntrboot
(Requiere un Flashcart Compatible)

or

Instalar boot9strap (Hardmod)
(Requiere soldar)
\ No newline at end of file + diff --git a/_pages/es_ES/get-started.txt b/_pages/es_ES/get-started.txt index fa963f9187..3e7c3fd30f 100644 --- a/_pages/es_ES/get-started.txt +++ b/_pages/es_ES/get-started.txt @@ -6,85 +6,16 @@ title: "Comencemos" ### Lectura requerida -Selecciona la casilla apropiada para su versión en la tabla de más abajo. Ten en cuenta que las columnas "desde" y "hasta" son inclusivas. Esto quiere decir que por ejemplo la fila "desde 9.0.0 hasta 9.2.0" incluye la 9.0.0, 9.1.0 y 9.2.0. - -La versión de tu consola puede verse en la esquina inferior derecha de la pantalla superior en la Configuración de la consola. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**Si no puedes seguir las instrucciones correspondientes a tu versión específica debido a falta de requisitos, entonces deberías ver la fila de "Todas las versiones" para los métodos que funcionan independientemente de la versión de la consola.** - -Para todas las versiones, también puedes [actualizar mediante cartucho](cart-update) (o utiliza una actualización de sistema estándar) a una versión superior de la misma columna para seguir esas instrucciones. - -Si ya hackeaste tu 3DS anteriormente y tienes una instalación basada en EmuNAND, simplemente sigue todas las instrucciones estando en la SysNAND. Reemplaza todos los archivos que ya existan. Tus datos serán transferidos desde la EmuNAND a tu nueva instalación de B9S al final. Si utilizas menuhax, deberías [limpiar el extdata del Menú HOME](troubleshooting#clear-home-menu-extdata) para removerlo antes de empezar. - -Esta página contiene instrucciones para instalar boot9strap en una 3DS o 2DS *sin modificar*. Si ya tienes instalado arm9loaderhax y quieres actualizar a boot9strap, sigue [A9LH a B9S](a9lh-to-b9s). -{: .notice--primary} - -¡Antes de empezar, se recomienda que los usuarios de Windows habiliten la opción para mostrar extensiones de archivo mediante [Extensiones de archivos (Windows)](file-extensions-(windows))! -{: .notice--info} - -¡Antes de empezar, deberías comprobar si tu tarjeta SD tiene errores usando [H2testw (Windows)](h2testw-(windows)),[F3 (Linux)](f3-(linux)), o [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -Si bien podemos considerar que el Custom Firmware es relativamente seguro hoy por hoy, es importante tener en cuenta que nunca será "a prueba de baneos". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -Recomendamos que evites las siguientes acciones: -1. Piratería -1. Usar trampas en juegos en línea -1. Movimientos sospechosos en la eShop (tarjetas de crédito rechazadas, por ejemplo) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -Consideramos que tanto SpotPass y StreetPass también son seguros de utilizar al día de hoy. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Tabla de versiones - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DesdeHastaAcción
1.0.02.0.0Actualiza a la ultima versión o utiliza un método para "Todas las versiones"
2.1.08.1.0Instalar boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Actualiza a la ultima versión o utiliza un método para "Todas las versiones"
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
TODAS LAS VERSIONES

ntrboot
(Requiere un Flashcart Compatible)

or

Instalar boot9strap (Hardmod)
(Requiere soldar)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/es_ES/godmode9-usage.txt b/_pages/es_ES/godmode9-usage.txt index dccd0e3907..867d9705ca 100644 --- a/_pages/es_ES/godmode9-usage.txt +++ b/_pages/es_ES/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "Usos de GodMode9" {% include toc title="Tabla de contenidos" %} -Para soporte (en inglés) para GodMode9, así como ayudar con la creación de scripts y obtener actualizaciones e información, únete al [Discord de GodMode9](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Lectura requerida diff --git a/_pages/es_ES/home.txt b/_pages/es_ES/home.txt index f142d9f813..fee1d6eb71 100644 --- a/_pages/es_ES/home.txt +++ b/_pages/es_ES/home.txt @@ -63,7 +63,7 @@ Para una lista de cada una de las firmas calculadas de sighax, echa un vistazo a ## ¿Qué puedo hacer con Custom Firmware? + Jugar a todos los juegos disponibles, en formato físico o de la eShop, independiente de su región -+ Personaliza tu Menú HOME con [temas y pantallas de splash](https://themeplaza.eu/) creados por usuarios ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Utilizar "Hack ROMs" de juegos que ya posees + Realizar capturas de pantalla de juegos y aplicaciones + Respaldar, editar y restaurar partidas guardadas de muchos juegos @@ -78,11 +78,11 @@ Para una lista de cada una de las firmas calculadas de sighax, echa un vistazo a + **Antes de comenzar la guía, debes conocer los riesgos de hackear la 3DS: CADA VEZ que modificas tu sistema, siempre existe la posibilidad de que tu consola quede inutilizable de forma PERMANENTE. Es algo raro, pero la posibilidad está ahí, así que asegúrate de seguir TODAS las instrucciones AL PIE DE LA LETRA.** + Si ya has hackeado tu 3DS antes para tener una configuración con EmuNAND y quieres mover el contenido de esta a tu nueva CFW SysNAND, debes seguir todas las instrucciones y restaurar tu EmuNAND existente cuando se te solicite al llegar a [Finalizar Instalación](finalizing-setup). -+ Esta guía servirá para consolas New 3DS, Old, 3DS, New 2DS y Old 2DS de cualquier región, en versión de firmware 11.13.0 o inferior. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Si todo va según el plan, no perderás datos y terminarás con todo lo que tenías anteriormente (juegos, NNID, datos de guardado, etc se conservarán). + Mantén tu consola conectada y cargada durante todo el proceso para evitar pérdidas de datos o daños, producto de un apagado inesperado! + Tu tarjeta SD debe ser [MBR, no GPT](http://www.howtogeek.com/245610/) (la tarjeta SD que viene con tu consola es MBR por defecto). La manera más fácil de comprobar esto es ver si la tarjeta funciona en tu 3DS. Si funciona, la tarjeta es MBR. -+ Si necesitas formatear una tarjeta SD nueva, puedes usar [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) y ajustar el tamaño de unidad de asignación a 32K (32768)). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + La Old 2DS es esencialmente idéntica a la Old 3DS en términos de software, mientras que la New 2DS es esencialmente idéntica a la New 3DS en términos de software. Cualquier paso que diga "Old 3DS" también aplican a la Old 2DS, y cualquier paso que diga "New 3DS" también aplica a la New 2DS. ___ diff --git a/_pages/es_ES/homebrew-launcher-(alternatives).txt b/_pages/es_ES/homebrew-launcher-(alternatives).txt index 1001d5ae3e..2087227783 100644 --- a/_pages/es_ES/homebrew-launcher-(alternatives).txt +++ b/_pages/es_ES/homebrew-launcher-(alternatives).txt @@ -34,7 +34,7 @@ Para extraer los archivos `.7z` enlazados esta página, necesitarás un gestor d 1. Copia `boot.3dsx` a la raíz de tu tarjeta SD 1. Copia el archivo `boot.firm` desde el `.7z` de Luma3DS a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD +1. Copia los archivos `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD 1. Copia `safehax.3dsx` a la carpeta `/3ds/` en tu tarjeta SD 1. Copia `udsploit.3dsx` a la carpeta `/3ds/` en tu tarjeta SD 1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD y renombra `SafeB9SInstaller.bin` a `safehaxpayload.bin` diff --git a/_pages/es_ES/homebrew-launcher-(browserhax-2020).txt b/_pages/es_ES/homebrew-launcher-(browserhax-2020).txt index 5928677697..487f25a45c 100644 --- a/_pages/es_ES/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/es_ES/homebrew-launcher-(browserhax-2020).txt @@ -2,66 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Tabla de contenidos" %} - -### Lectura requerida - -Este método para acceder al Homebrew Launcher se aprovecha de algunos problemas pasados por alto en el Navegador de Internet nativo de la 3DS. - -### Pruebas de compatibilidad - -Para usar este método, tu consola debe ser de una región compatible, y tener una versión compatible del Navegador de Internet. - -Puedes confirmar dichos detalles en Configuración de la Consola. - -1. Abre Configuración de la Consola. -1. En la esquina inferior derecha de la pantalla superior, conseguirás la versión del firmware de la consola, en el formato de `11.13.0-45x`. - + El 45 es la versión del navegador de Internet, y la letra es la región de tu consola - + Si tu versión de Navegador es menor a 45, necesitas actualizar la consola mediante la opción de "Actualización" en Configuración de la consola - + E indica la región de Europa - + U indica la región Americana (USA) - + J indica la región de Japón - + Si tu consola no es de alguna de estas regiones, no es compatible con este método. -1. Recuerda la región de tu consola. La necesitarás para más tarde. - -### Qué necesitas - -* La última versión del [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La última versión de BrowserHax [[para Old 3DS] (https://github.com/zoogie/old-browserhax/releases/latest) / [para New 3DS] (https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old se refiere al modelo de tu consola. Si no sabes cuál modelo tienes, consulta [esta imagen] -(https://3ds.eiphax.tech/pic/newold.png) -* Una conexión WiFi activa en tu consola - -### Instrucciones - -#### Sección I - Preparativos - -1. Apaga la consola y retira la tarjeta SD -1. Inserta la tarjeta SD en tu computadora -1. Copia `boot.3dsx` del archivo de Homebrew Launcher a la raíz de tu tarjeta SD - + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella -1. En el archivo de BrowserHax que descargaste, abre la carpeta correspondiente a la región de tu consola -1. Copia la carpeta `3ds` y los archivos `browserhax_hblauncher_ropbin_payload.bin` y `arm11code.bin` al directorio raíz de tu tarjeta SD - + Ahora debería haber una carpeta llamada `Nintendo 3DS`, otra llamada `3ds` y los dos archivos `.bin` en la raíz de tu tarjeta SD - -### Sección II - BrowserHax - -1. Abre [esta imagen](https://3ds.eiphax.tech/pic/hax.png) en una nueva pestaña o ventana de tu computadora -1. Extrae la tarjeta SD de forma segura de la computadora y ponla de vuelta en la consola -1. Enciende tu consola y asegúrate de estar conectado a una red WiFi activa -1. Desde el menú HOME, presiona el gatillo izquierdo y el derecho al mismo tiempo (L y R) - + Esto debería abrir un escáner de QR. Si no abre un escáner de QR, USM (la próxima parte de instalar CFW) no funcionará para ti. Tendrás que usar un [método antiguo](legacy-methods) - + Si necesitas escribir el URL, es `https://zoogie.github.io/web/nbhax/` -1. Usa el código QR para escanear el código que abriste en el primer paso -1. Pulsa el botón "PROCEED TO HAXX" -1. Espera a que el proceso se complete - + Si la pantalla se queda en amarillo, apaga tu consola y vuelve a intentar esta sección -1. Si el exploit fue exitoso, tu consola habrá cargado el Homebrew Launcher - + Es posible que aparezca un error diciendo que no se han encontrado aplicaciones. De ser así, prosigue con el siguiente paso -1. Deja la consola encendida y prosigue con la siguiente sección - - -___ - -### Continúa en [Instalar boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/es_ES/homebrew-launcher-(pichaxx).txt b/_pages/es_ES/homebrew-launcher-(pichaxx).txt index 32c1068de8..94dd0cda02 100644 --- a/_pages/es_ES/homebrew-launcher-(pichaxx).txt +++ b/_pages/es_ES/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Tabla de contenidos" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectura requerida Este método de Seedminer utiliza tu archivo `movable.sed` para tener acceso al Homebrew Launcher mediante el exploit PicHaxx, con el objetivo de inyectar un programa de DSiWare dentro de la aplicación de Modo Descarga DS. Éste método requiere de haber conseguido (o descargado) el videojuego gratuito "Pokémon Picross" desde la eShop. -Si tu consola ya tiene acceso al Homebrew Launcher (desde PicHaxx u otro exploit), puedes pasar a [DSiWare Dumper](dsidumper). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} Si ya tienes Pokémon Picross, ¡éste proceso sobreescribirá tu partida guardada! @@ -19,7 +22,8 @@ Si ya tienes Pokémon Picross, ¡éste proceso sobreescribirá tu partida guarda * El juego gratuito "Pokémon Picross" de la eShop * Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer) * La última versión del [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* El [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(correspondiente a tu región y versión del sistema)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instrucciones @@ -27,26 +31,26 @@ Si ya tienes Pokémon Picross, ¡éste proceso sobreescribirá tu partida guarda 1. Copia `boot.3dsx` a la raíz de tu tarjeta SD 1. Copia el otherapp payload a la raíz de tu tarjeta SD y cambia su nombre a `otherapp.bin` - + Si no ves la extensión `.bin`, no la añadas al final del nombre del archivo + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Crea una carpeta llamada `3ds` en la raíz de tu tarjeta SD, si aún no existe #### Sección II - PicHaxx -1. Abre [la página de PicHaxx Injector](https://seedminer.hacks.guide/pichaxx/) en tu computadora +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Selecciona tu archivo `movable.sed` 1. Selecciona "Build and Download" (Construir y Descargar) 1. Espera a que el proceso se complete -1. En tu tarjeta SD ve a `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` - + La `` en cuestión es la misma que usaste en [Seedminer](seedminer) - + La carpeta `` será otra carpeta de 32 caracteres dentro de la carpeta `` -1. Copia el archivo `00000001.sav` recién descargado a la carpeta `data` dentro de tu tarjeta SD +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Sobreescribe el archivo anterior cuando se te pida 1. Vuelve a insertar tu tarjeta SD en la consola 1. Enciende tu consola 1. Inicia "Pokémon Picross" 1. Si el exploit fue exitoso, tu consola habrá cargado el Homebrew Launcher - + Es posible que aparezca un error diciendo que no se han encontrado aplicaciones. -1. Apaga tu consola. + + You may see an error stating there are no applications found +1. Apaga tu consola ___ diff --git a/_pages/es_ES/homebrew-launcher-(soundhax).txt b/_pages/es_ES/homebrew-launcher-(soundhax).txt index 87ca169180..683a0477df 100644 --- a/_pages/es_ES/homebrew-launcher-(soundhax).txt +++ b/_pages/es_ES/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Asegúrate de que la Comunicación inalámbrica de tu dispositivo está encendid Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los elementos claves de la versión, como la Configuración de la consola, el menú HOME, etc. las actualizaciones por cartucho no afectarán a Nintendo 3DS Sound ni a funcionalidades en línea, como la Transferencia de Sistema, el Navegador de internet, la Plaza Mii o la eShop. -¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<3.0.0)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que Soundhax deje de funcionar! ¡Necesitarás un [método alternativo](homebrew-launcher-(alternatives)) para entrar al Homebrew Launcher! +¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<2.1.0)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que Soundhax deje de funcionar! ¡Necesitarás un [método alternativo](homebrew-launcher-(alternatives)) para entrar al Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,13 +24,14 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme ### Qué necesitas * La última versión de [Soundhax](http://soundhax.com) *(correspondiente a tu consola, región y versión)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * La última versión de [SafeB9SInstaller] (https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * La última versión de [safehax](https://github.com/TiniVi/safehax/releases/latest) *(el archivo `.3dsx`)* * La última versión de [udsploit](https://github.com/smealum/udsploit/releases/latest) -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* El [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(correspondiente a tu versión del sistema y región)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instrucciones @@ -41,7 +42,7 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme 1. Copia el otherapp payload a la raíz de tu tarjeta SD y cambia su nombre a `otherapp.bin` 1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD +1. Copia los archivos `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD 1. Copia `safehax.3dsx` a la carpeta `/3ds/` en tu tarjeta SD 1. Copia `udsploit.3dsx` a la carpeta `/3ds/` en tu tarjeta SD 1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD y renombra `SafeB9SInstaller.bin` a `safehaxpayload.bin` diff --git a/_pages/es_ES/homebrew-launcher-(steelhax).txt b/_pages/es_ES/homebrew-launcher-(steelhax).txt index 33fb970194..65ec1b9a69 100644 --- a/_pages/es_ES/homebrew-launcher-(steelhax).txt +++ b/_pages/es_ES/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Tabla de contenidos" %} - -### Lectura requerida - -Este método de uso de Seedminer, para hacer un mejor exploit, utiliza tu archivo `movable.sed` para obtener acceso al Homebrew Launcher por medio del exploit Steelhax, tras lo cual inyectar un juego vulnerable de DSiWare en la aplicación de Modo Descarga de DS. Este método requiere que poseas de antemano (o que descargues) el juego gratuito "Steel Divers: Sub Wars" desde la eShop. - -Si tu consola ya posee acceso al Homebrew Launcher (ya sea a través de Steelhax o de otro exploit), puedes saltarte a [DSiWare Dumper](dsidumper). -{: .notice--success} - -Si ya tenías Steel Diver: Sub Wars, ¡este proceso sobreescribirá tu archivo de guardado! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### Qué necesitas - -* El juego gratuito "Steel Diver: Sub Wars" de la eShop -* Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer) -* La última versión [del Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La última versión de [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* El [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(correspondiente a tu región y versión del sistema)* - -### Instrucciones - -#### Sección I - Preparativos - -1. Crea una carpeta llamada `3ds` en la raíz de tu tarjeta SD, si aún no existe -1. Copia `boot.3dsx` a la raíz de tu tarjeta SD -1. Copia la carpeta `steelhax` del archivo `Steelhax-release.zip` a la raíz de tu tarjeta SD -1. Copia el otherapp payload a la carpeta `steelhax` en tu tarjeta SD y cambia su nombre a `payload.bin` - -#### Sección II - Steelminer - -1. Inserta tu tarjeta SD en tu consola -1. Inicia "Steel Diver: Sub Wars" y selecciona un Mii para crear un archivo de guardado - + Rechaza la actualización del juego cuando lo pregunte - + Si ya has actualizado el juego, usa el menú de Gestión de datos en la Configuración de la consola para eliminar la actualización -1. Sal de "Steel Diver: Sub Wars" -1. Apaga tu consola -1. Inserta tu tarjeta SD en tu computadora -1. Abre [el sitio web de inyección de Steelminer](https://seedminer.hacks.guide/steelhax/) en tu computadora -1. Selecciona tu archivo `movable.sed` -1. Selecciona "Start!" -1. Espera a que el procesos se complete -1. Ve a `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `` -> `data` en tu tarjeta SD - + **Región EUR**: `000d7e00` - + **Región JPN**: `000d7c00` - + **Región USA**: `000d7d00` -1. Copia el nuevo archivo de guardado que descargaste en la carpeta `data` en tu tarjeta SD - + Sobreescribe el archivo anterior cuando te lo pida -1. Vuelve a insertar tu tarjeta SD en tu consola -1. Enciende tu consola -1. Inicia "Steel Diver: Sub Wars" -1. Si el exploit fue exitoso, tu consola habrá cargado el Hombrew Launcher - + Es posible que aparezca un error diciendo que no se han encontrado aplicaciones. -1. Apaga tu consola. - -___ - -### Continúa a [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/es_ES/installing-boot9strap-(2xrsa).txt b/_pages/es_ES/installing-boot9strap-(2xrsa).txt index 335dd99071..1609ee12ca 100644 --- a/_pages/es_ES/installing-boot9strap-(2xrsa).txt +++ b/_pages/es_ES/installing-boot9strap-(2xrsa).txt @@ -18,7 +18,7 @@ title: "Instalar boot9strap (2xrsa)" 1. Inserta tu tarjeta SD en tu computadora 1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD +1. Copia los archivos `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD 1. Copia `arm9.bin` y `arm11.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD ![]({{ "/images/screenshots/boot9strap-2xrsa-file-layout.png" | absolute_url }}) diff --git a/_pages/es_ES/installing-boot9strap-(browser).txt b/_pages/es_ES/installing-boot9strap-(browser).txt index 406bf67fd0..f1a03756b3 100644 --- a/_pages/es_ES/installing-boot9strap-(browser).txt +++ b/_pages/es_ES/installing-boot9strap-(browser).txt @@ -4,12 +4,20 @@ title: "Instalar boot9strap (navegador)" {% include toc title="Tabla de contenidos" %} +### Lectura requerida + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### Qué necesitas +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * La última versión de [SafeB9SInstaller] (https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrucciones @@ -17,24 +25,21 @@ title: "Instalar boot9strap (navegador)" 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD -1. Copia `SafeB9SInstaller.dat` y `Launcher.dat` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola #### Sección II - Ejecutar SafeB9SInstaller -1. Abre el navegador y ve a cualquiera de estas páginas en tu 3DS - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Asegúrate de probar cada página si la primera no funciona (algunas versiones no pueden usar la primera, otras no pueden las últimas dos) +1. Enciende tu consola +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + Si te sale un error, sigue la [guía de solución de problemas](troubleshooting#a-browser-based-exploit-is-not-working) 1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller @@ -51,7 +56,6 @@ title: "Instalar boot9strap (navegador)" 1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: + **"Show NAND or user string in System Settings"** 1. Presiona (Start) para guardar y reiniciar - + Si te da error, tan solo continúa en la siguiente página ___ diff --git a/_pages/es_ES/installing-boot9strap-(fredtool).txt b/_pages/es_ES/installing-boot9strap-(fredtool).txt index de1b29fdda..16bce74a3c 100644 --- a/_pages/es_ES/installing-boot9strap-(fredtool).txt +++ b/_pages/es_ES/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Instalar Boot9strap (Fredtool)" {% include toc title="Tabla de contenidos" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectura requerida Este método de uso de Seedminer, para hacer un mejor exploit, utiliza tu archivo `movable.sed` para desencriptar cualquier título de DSiWare con el objetivo de inyectar un título de DSiWare vulnerable en la aplicación de Configuración de Internet de DS. Esto requiere que tengas una copia de seguridad de un título de DSiWare, por ejemplo, el proveniente de BannerBomb o la herramienta DSiWare Dumper. @@ -12,11 +15,11 @@ Todo esto son implementaciones funcionales del exploit "Particiones FIRM de text ### Qué necesitas -* Una copia de seguridad de DSiWare (como el que se encuentra en la raiz SD de [BannerBomb3](bannerbomb3) o [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer) * La última versión de [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * La ultima versión de [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sección I - Preparativos @@ -28,18 +31,18 @@ Todo esto son implementaciones funcionales del exploit "Particiones FIRM de text #### Sección II - Fredtool -1. Abre [Fredtool](https://fredtool.bruteforcemovable.com/) en tu computadora +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Selecciona tu archivo `movable.sed` para completar el campo "Your movable.sed" 1. Selecciona tu copia de seguridad de DSiWare (`.bin`) para completar el campo "Your dsiware.bin" 1. Completa el captcha que dice "I'm not a robot" 1. Selecciona "Start" 1. Espera a que el procesos se complete 1. Cuando el proceso haya finalizado, descarga tu archivo modificado de DSiWare desde el sitio - + Este archivo contiene dos archivos copia de seguridad de DSiWare dentro; uno limpio (sin modificar) y otro modificado (vulnerado) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Ve a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` en tu tarjeta SD - + La `` en cuestión es la misma que usaste en [Seedminer](seedminer) - + Esta carpeta `` será otra carpeta de 32 caracteres/numeros dentro de la carpeta `` - + Si no existe la carpeta `Nintendo DSiWare`, créala dentro de la carpeta `` + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copia el archivo `4283841.bin` presente en la carpeta `output/hax/` del archivo DSiWare que descargaste (`fredtool_output.zip`), a la carpeta `Nintendo DSiWare` 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola @@ -87,7 +90,7 @@ Si prefieres una guía visual para esta parte, hay una disponible [aquí](https: 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copia el archivo `42383841.bin` presente en la carpeta `output/clean/` del archivo DSiWare que descargaste (`fredtool_output.zip`), a la carpeta `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` en tu tarjeta SD +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Reemplaza el archivo `42383841.bin` ya existente 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola diff --git a/_pages/es_ES/installing-boot9strap-(frogtool).txt b/_pages/es_ES/installing-boot9strap-(frogtool).txt index f84c4200be..83777f5858 100644 --- a/_pages/es_ES/installing-boot9strap-(frogtool).txt +++ b/_pages/es_ES/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Instalar boot9strap (Frogtool)" {% include toc title="Tabla de contenidos" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectura requerida Ahora aprovecharemos el acceso al Homebrew Launcher para ejecutar la aplicación Frogtool e inyectar la versión japonesa del título "Flipnote Studio", la cual usaremos posteriormente para ejecutar b9sTool e instalar boot9strap. @@ -18,14 +21,14 @@ Para utilizar los enlaces [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * La última versión de [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * La ultima versión de [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sección I - Preparativos 1. Inserta tu tarjeta SD en tu computadora 1. Copia tu archivo `movable.sed` a la raíz de tu tarjeta SD 1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD -1. Copia `boot.nds` (B9STool) desde el archivo `.zip` de b9sTool a la raíz de tu tarjeta SD +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copia `Frogtool.3dsx` a la carpeta `/3ds/` en tu tarjeta SD 1. Copia `frogcert.bin` a la raíz de tu tarjeta SD 1. Vuelve a insertar tu tarjeta SD en tu consola @@ -74,6 +77,26 @@ Si prefieres una guía visual para esta parte, hay una disponible [aquí](https: 1. Presiona (Start) para guardar y reiniciar + Tu consola deberá cargar el Menú HOME después de un breve momento. Si la pantalla se queda en negro por más de 5 minutos, [sigue la guía de solución de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Ejecuta la aplicación Modo Descarga (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Espera hasta que veas los dos botones + + No presiones ninguno de los botones +1. Presiona (Left Shoulder) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina +1. Selecciona "Miscellaneous options" +1. Selecciona "Switch the hb. title to the current app." +1. Presiona (B) para continuar +1. Presiona (B) para regresar al menú principal de Rosalina +1. Presiona (B) para salir del menú de Rosalina +1. Presiona (Home), luego cierra la aplicación de Modo Descarga +1. Inicia la aplicación de Modo Descarga otra vez +1. Tu consola debería cargar el Homebrew Launcher +1. Inicia Frogtool desde la lista de homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Una vez finalizada esta operación, lee las pantallas y comprueba si el proceso ha sido exitoso + + Si hay errores o archivos faltantes, corrige el problema e inténtalo de nuevo +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continúa en [Finalizar instalación](finalizing-setup) diff --git a/_pages/es_ES/installing-boot9strap-(hardmod).txt b/_pages/es_ES/installing-boot9strap-(hardmod).txt index 1e1c5e3172..a6edf1c477 100644 --- a/_pages/es_ES/installing-boot9strap-(hardmod).txt +++ b/_pages/es_ES/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ Esto funcionará en New 3DS, New 2DS, Old 3DS, y Old 2DS en *todas* las versione * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* * La última versión de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Los usuarios de Windows pueden usar el `.exe` compilado, mientras que los usuarios de Mac y Linux necesitarán tener [Python 3](https://www.python.org/downloads/) instalado para ejecutar el `.py` -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * El archivo `.firm` correspondiente a tu consola y versión: | Versión(es) | Kernel | Old 3DS u Old 2DS | New 3DS o New 2DS | diff --git a/_pages/es_ES/installing-boot9strap-(hbl-usm).txt b/_pages/es_ES/installing-boot9strap-(hbl-usm).txt index 7736d34b80..9169a3186d 100644 --- a/_pages/es_ES/installing-boot9strap-(hbl-usm).txt +++ b/_pages/es_ES/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Instalar boot9strap (USM)" --- -{% include toc title="Tabla de contenidos" %} - -### Lectura requerida - -Para poder aprovechar el exploit del firmware SAFE_MODE de la consola, necesitamos inyectar un perfil de WiFi con el exploit. - -Como ya tenemos acceso a Homebrew, podemos utilizar slotTool para hacerlo. - -Este método en específico está pensado para ser utilizado con acceso al Homebrew Launcher a través de [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -Si tienes acceso al Homebrew Launcher a través de otro punto de entrada, debes utilizar [Frogtool](installing-boot9strap-(frogtool)). - -Una vez que el perfil de WiFi ha sido inyectado, usaremos SAFE_MODE, que consiste en una función de recuperación presente en todas las consolas, para activar el perfil de WiFi con el exploit. - -Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, tal y como se indica por las letras U, E, J o K después de la versión del sistema. - -Si tus botones (Right/Left Shoulder), (D-Pad arriba) o (A) no funcionan, deberás utilizar un [Método antiguo](legacy-methods). Para ayuda con este asunto, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedir, en inglés, que te ayuden. -{: .notice--danger} - -### Qué necesitas - -* La ultima versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La ultima versión de [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Sección I - Preparativos - -1. Tu consola debería estar encendida y mostrando la pantalla del Homebrew Launcher, de la parte anterior de la guía -1. Inicia slotTool desde la lista de homebrew - + Si te quedas atascado en una pantalla roja, fuerza el apagado de la consola manteniendo pulsado el botón de encendido durante 15 segundos e intenta de nuevo esta sección -1. Selecciona la opción "INSTALL exploit to wifi slots 1,2,3 & shutdown" - + Verás algo de texto en pantalla y luego la consola se apagará -1. Extrae la tarjeta SD de la consola y conéctala en la computadora -1. Copia el archivo `boot.firm` presente en el archivo `.zip` de Luma3DS al directorio raíz de tu tarjeta SD, sobreescribiendo archivos preexistentes si los hay -1. Copia el archivo `usm.bin` desde el `.zip` de unSAFE_MODE a la raíz de tu tarjeta SD -1. Reinserta la tarjeta SD en tu consola - -#### Sección II - unSAFE_MODE - -1. Con tu consola aún apagada, mantén pulsados los siguientes botones: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), luego presiona (Power) - + Mantén pulsados los botones hasta que la consola encienda en modo seguro -1. Presiona "OK" para aceptar la actualización - + No hay actualización. Esto es parte del exploit -1. Presiona "Acepto" para aceptar los términos y condiciones -1. La actualización fallará, con el código de error `003-1099`. Este comportamiento es el esperado -1. Cuando se te pregunte "¿Quieres configurar tu conexión a internet?", presiona "Aceptar" -1. En el menú siguiente, navega a `Conexión 1` -> `Modificar ajustes` -> `Siguiente página (flecha derecha)` -> `Servidor proxy` -> `Ajustes avanzados` - + Aquí hay una [representación visual](https://uwuu.ca/images/safemode_highlighted.png) -1. Una vez que veas `B9S install SUCCESS` en la pantalla superior, presiona cualquier botón para reiniciar a la configuración de Luma - -#### Sección III - Configuración de Luma3DS - -1. Tu consola debería mostrar automáticamente el menú de configuración de Luma -1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: - + **"Show NAND or user string in System Settings"** -1. Presiona (Start) para guardar y reiniciar - + Tu consola deberá cargar el Menú HOME después de un breve momento. Si la pantalla se queda en negro por más de 5 minutos, [sigue la guía de solución de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Sección IV - Restaurando los Perfiles de Configuración de Red Inalámbrica - -1. Inicia la aplicación de Modo Descarga -1. Espera hasta que veas los dos botones - + No presiones ninguno de los botones -1. Presiona (Left Shoulder) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina -1. Selecciona "Miscellaneous options" -1. Selecciona "Switch the hb. title to the current app." -1. Presiona (B) para continuar -1. Presiona (B) para regresar al menú principal de Rosalina -1. Presiona (B) para salir del menú de Rosalina -1. Presiona (Home), luego cierra la aplicación de Modo Descarga -1. Inicia la aplicación de Modo Descarga otra vez -1. Tu consola debería cargar el Homebrew Launcher -1. Inicia slotTool desde la lista de homebrew -1. Selecciona "RESTORE original wifi slots 1,2,3" -1. Tu consola se reiniciará - -___ - -### Continúa en [Finalizar instalación](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/es_ES/installing-boot9strap-(ntrboot).txt b/_pages/es_ES/installing-boot9strap-(ntrboot).txt index 2510843c45..bf3b4a389f 100644 --- a/_pages/es_ES/installing-boot9strap-(ntrboot).txt +++ b/_pages/es_ES/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ Para utilizar los enlaces [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) * Un imán que activa el modo de espera de tu consola (si usas una consola con tapa) * Tu flashcart con ntrboot instalado * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrucciones #### Sección I - Preparativos 1. Apaga tu consola -1. Inserta la tarjeta SD de tu consola en tu computadora +1. Insert your console's SD card into your computer + Esta es la tarjeta SD de tu 3DS, *no* la tarjeta SD de tu flashcart -1. Copia `SafeB9SInstaller.firm` a la raíz de tu tarjeta SD y renombra el archivo a `boot.firm` -1. Copia el archivo `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD -1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Vuelve a insertar tu tarjeta SD en tu consola +1. Reinsert your SD card into your 3DS 1. Enciende tu consola #### Sección II - ntrboot diff --git a/_pages/es_ES/installing-boot9strap-(pichaxx).txt b/_pages/es_ES/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..961d7bbb4f --- /dev/null +++ b/_pages/es_ES/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Tabla de contenidos" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Lectura requerida + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### Qué necesitas + +* The game "Pokémon Picross" (free on eShop) +* Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer) +* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instrucciones + +#### Sección I - Preparativos + +1. Apaga tu consola +1. Inserta tu tarjeta SD en tu computadora +1. Copy `otherapp.bin` to the root of your SD card +1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD +1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD +1. Copia los archivos `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Sección II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Selecciona tu archivo `movable.sed` +1. Selecciona "Build and Download" (Construir y Descargar) +1. Espera a que el procesos se complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Sobreescribe el archivo anterior cuando se te pida +1. Vuelve a insertar tu tarjeta SD en tu consola +1. Enciende tu consola +1. Inicia "Pokémon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Sección III - Instalar boot9strap + +1. Espera a que todos los controles de seguridad se completen +1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap +1. Una vez se haya completado, presiona (A) para reiniciar tu consola + +#### Sección IV - Configurar Luma3DS + +1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS + + Si la pantalla se queda en negro, [sigue la guía de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: + + **"Show NAND or user string in System Settings"** +1. Presiona (Start) para guardar y reiniciar + + Si te da error, tan solo continúa en la siguiente página + +___ + +### Continúa en [Finalizar instalación](finalizing-setup) +{: .notice--primary} diff --git a/_pages/es_ES/installing-boot9strap-(safecerthax).txt b/_pages/es_ES/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..18f6b4639c --- /dev/null +++ b/_pages/es_ES/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). Para ayuda con este asunto, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedir, en inglés, que te ayuden. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### Qué necesitas + +* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instrucciones + +#### Sección I - Preparativos +1. Apaga tu consola +1. Inserta tu tarjeta SD en tu computadora +1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD +1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Vuelve a insertar tu tarjeta SD en tu consola +1. Enciende tu consola + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Apaga tu consola + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Presiona "OK" para aceptar la actualización + + No hay actualización. Esto es parte del exploit +1. Presiona sobre "Acepto" para aceptar los términos y condiciones + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Espera a que todos los controles de seguridad se completen +1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap +1. Una vez se haya completado, presiona (A) para reiniciar tu consola + +#### Section V - Configuring Luma3DS + +1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS + + Si la pantalla se queda en negro, [sigue la guía de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: + + **"Show NAND or user string in System Settings"** +1. Presiona (Start) para guardar y reiniciar + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Apaga tu consola + +___ + +### Continúa en [Finalizar instalación](finalizing-setup) +{: .notice--primary} diff --git a/_pages/es_ES/installing-boot9strap-(soundhax).txt b/_pages/es_ES/installing-boot9strap-(soundhax).txt index 47f9650427..130b879e2f 100644 --- a/_pages/es_ES/installing-boot9strap-(soundhax).txt +++ b/_pages/es_ES/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Instalar boot9strap (Soundhax)" ### Lectura requerida -Soundhax (en combinación con pre9otherapp) es compatible con las versiones desde la 2.1.0 hasta la 8.1.0 de las regiones EUR, JPN, KOR y USA. - -{% capture notice-1 %} - -Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los elementos claves de la versión, como la Configuración de la consola, el menú HOME, etc. las actualizaciones por cartucho no afectarán a Nintendo 3DS Sound ni a funcionalidades en línea, como la Transferencia de Sistema, el Navegador de internet, la Plaza Mii o la eShop. - -¡Esto significa que actualizar mediante cartucho a una versión que contenga una versión más antigua de Nintendo 3DS Sound *(<2.1.0)* a una que introdujo una versión más nueva de Nintendo 3DS Sound hará que Soundhax deje de funcionar! ¡Necesitarás un método alternativo para entrar al Homebrew Launcher como [Instalar boot9strap (navegador)](installing-boot9strap-(browser)) o [Instalar boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### Qué necesitas * La última versión de [Soundhax](http://soundhax.com) *(correspondiente a tu consola, región y versión)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La última versión [del Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La última versión de [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(el archivo `.bin` correspondiente a tu versión de firmware)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instrucciones @@ -33,12 +24,11 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora 1. Copia el archivo `.m4a` de Soundhax a la raíz de tu tarjeta SD -1. Copia el pre9otherapp payload a la raíz de tu tarjeta SD y cambia su nombre a `otherapp.bin` -1. Copia el archivo `boot.firm` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD -1. Copia `boot.3dsx` a la raíz de tu tarjeta SD +1. Copy `otherapp.bin` to the root of your SD card +1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD -1. Copia `arm9.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD +1. Copia los archivos `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola @@ -55,7 +45,7 @@ Ten en cuenta que las actualizaciones con cartucho sólo actualizarán los eleme + En esta situación, ejecutar Soundhax inmediatamente causaría que los consejos aparezcan cada vez que se inicie la aplicación hasta realizar lo descrito anteriormente 1. Ve a `/SDCARD`, y luego reproduce "<3 nedwill 2016" + Esto podría tomar varios intentos - + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/es_ES/installing-boot9strap-(ssloth-browser).txt b/_pages/es_ES/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..85ec6b86f1 --- /dev/null +++ b/_pages/es_ES/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### Qué necesitas + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Sección I - Preparativos + +1. Apaga tu consola +1. Inserta tu tarjeta SD en tu computadora +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD +1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Vuelve a insertar tu tarjeta SD en tu consola +1. Enciende tu consola + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Apaga tu consola + +#### Section III - Launching SafeB9SInstaller +1. Enciende tu consola +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Si te sale un error, sigue la [guía de solución de problemas](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. Si el exploit ha funcionado, habrás iniciado SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Espera a que todos los controles de seguridad se completen +1. Cuando se solicite, introduce la combinación de botones mostrada para instalar boot9strap +1. Una vez se haya completado, presiona (A) para reiniciar tu consola + +#### Section V - Configuring Luma3DS + +1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS + + Si la pantalla se queda en negro, [sigue la guía de problemas](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: + + **"Show NAND or user string in System Settings"** +1. Presiona (Start) para guardar y reiniciar + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Apaga tu consola + +___ + +### Continúa en [Finalizar instalación](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/es_ES/installing-boot9strap-(usm).txt b/_pages/es_ES/installing-boot9strap-(usm).txt index 5885a7ea1c..f3d3129582 100644 --- a/_pages/es_ES/installing-boot9strap-(usm).txt +++ b/_pages/es_ES/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Instalar boot9strap (USM)" {% include toc title="Tabla de contenidos" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Lectura requerida Para pode aprovechar el exploit del firmware SAFE_MODE de nuestro sistema, necesitamos inyectar un perfil de WiFi con el exploit. @@ -17,30 +20,31 @@ Una vez que el perfil de WiFi ha sido inyectado, usaremos SAFE_MODE, que consist Estas instrucciones funcionan en consolas de las regiones USA, Europa, Japón y Corea, indicado por las letras U, E, J o K después de la versión del sistema. Si tus botones (Right/Left Shoulder), (D-Pad arriba) o (A) no funcionan, deberás utilizar un [Método antiguo](legacy-methods). Para ayuda con este asunto, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) donde puedes pedir, en inglés, que te ayuden. -{: .notice--danger} +{: .notice--warning} ### Qué necesitas * Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer) -* La ultima versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sección I - Preparativos -1. Abre la herramienta [unSAFE_MODE-bb3](https://usm.bruteforcemovable.com/) en tu computadora - + Si el sitio no está operativo, intenta con [éste otro](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Carga tu movable.sed usando la opción "Choose File" 1. Haz clic en "Download unSAFE_MODE-bb3 archive" - + Esto descargará un exploit de DSiWare llamado `F00D43D5.bin` y un archivo de datos de exploit para SAFE_MODE llamado `usm.bin` dentro de un archivo zip (`unSAFE_MODE-bb3.zip`) -1. Si tu consola está encendida, apagala + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Inserta tu tarjeta SD en tu computadora 1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD -1. Copia `usm.bin` desde el archivo USM (`unSAFE_MODE-bb3.zip`) a la raíz de tu tarjeta SD -1. Ve a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` en tu tarjeta SD - + La `` en cuestión es la misma que usaste en [Seedminer](seedminer) - + Si `Nintendo DSiWare` no existe, créala + + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Ve a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` en tu tarjeta SD + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. Si ya hay archivos de copias de seguridad existentes de DSiWare (`.bin`) en esta carpeta, muévelos a tu PC + Esto te dejará con una carpeta de Nintendo DSiWare vacía. Mover los archivos a tu PC asegura que no borres ninguna copia de seguridad creada intencionalmente -1. Copia el archivo `F00D43D5.bin` del archivo USM (`unSAFE_MODE-bb3.zip`) a la carpeta `Nintendo DSiWare` +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Sección II - BannerBomb3 @@ -55,14 +59,15 @@ Si tus botones (Right/Left Shoulder), (D-Pad arriba) o (A) no funcionan, deberá #### Sección III - unSAFE_MODE -1. Con tu consola aún apagada, mantén pulsados los siguientes botones: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), luego presiona (Power) - + Suelta los botones después de unos segundos. Tu consola iniciará en modo seguro +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Presiona "OK" para aceptar la actualización + No hay actualización. Esto es parte del exploit 1. Presiona sobre "Acepto" para aceptar los términos y condiciones 1. La actualización fallará, con el código de error `003-1099`. Este comportamiento es el esperado 1. Cuando se te pregunte "¿Quieres configurar tu conexión a internet?", selecciona "Aceptar" 1. En el menú siguiente, navega a `Conexión 1` -> `Modificar ajustes` -> `Siguiente página (flecha derecha)` -> `Servidor proxy` -> `Ajustes avanzados` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Una vez que veas `B9S install SUCCESS` en la pantalla superior, presiona cualquier botón para reiniciar a la configuración de Luma #### Sección IV - Configurar Luma3DS @@ -81,10 +86,8 @@ Si tus botones (Right/Left Shoulder), (D-Pad arriba) o (A) no funcionan, deberá + La pantalla inferior debería parpadear en verde y el sistema se reiniciará al Menú HOME unos segundos más tarde. Esto significa que los perfiles de configuración WiFi fueron restaurados con éxito 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Ve a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` en tu tarjeta SD - + La `` en cuestión es la misma que usaste en [Seedminer](seedminer) +1. Ve a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` en tu tarjeta SD 1. Elimina `F00D43D5.bin` de la carpeta Nintendo DSiWare -1. Continúa en Finalizar instalación ___ diff --git a/_pages/es_ES/legacy-methods.txt b/_pages/es_ES/legacy-methods.txt index ace819fdae..8abe7bee56 100644 --- a/_pages/es_ES/legacy-methods.txt +++ b/_pages/es_ES/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Métodos antiguos" Han habido múltiples mejoras y avances en los métodos para instalar Custom Firmware en el último tiempo. -Por este motivo, se recomienda que utilices el método más actualizado de los que hay en [Comencemos](get-started). +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. Sin embargo, los métodos antiguos ("legacy") o anticuados se mantienen aquí por varios propósitos. Ellos requerirán que primero hayas completado la guía de [Seedminer](seedminer). @@ -18,7 +18,7 @@ Si necesitas ayuda, únete al [Discord de Nintendo Homebrew](https://discord.gg/ Los exploits a continuación hacen uso de una de las dos aplicaciones del Modo DS que vienen incorporadas en la 3DS: Conexiones de Nintendo DS y Modo Descarga DS. -Si tanto el Modo Descarga DS como la configuración de Conexiones de Nintendo DS no funcionan, tendrás que repararlos usando [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) mediante un punto de entrada a homebrew, como Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### Prueba de la Configuración de Internet de DS (utilizada para Fredtool) @@ -38,9 +38,7 @@ Si tanto el Modo Descarga DS como la configuración de Conexiones de Nintendo DS ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + Este método requiere que los botones traseros de la consola funcionen bien (L y R) 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + Este método se recomienda si los botones traseros de la consola no funcionan (L y R) -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + Se recomienda este método si el menú de Gestión de Nintendo DSiware se cuelga o traba \ No newline at end of file diff --git a/_pages/es_ES/ntrboot.txt b/_pages/es_ES/ntrboot.txt index b1537ad921..29b827490d 100644 --- a/_pages/es_ES/ntrboot.txt +++ b/_pages/es_ES/ntrboot.txt @@ -17,23 +17,23 @@ Ten en cuenta que cartuchos que tengan una "Bomba de tiempo" incorporados no pod | Nombre de la flashcart | Precio actual |¿Tiene "bomba de tiempo"? | ¿Versiones de 3DS? | ¿Versiones de DSi? | Notas Adicionales | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 3 de septiembre de 2019 | <= 11.13.0 | <= 1.4.5 | **Viene con ntrboot pre-flasheado**; puede ser flasheado de vuelta a un flashcart NDS. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Viene con ntrboot pre-flasheado** ([posee un interruptor interno para alternar entre modo NDS y ntrboot]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); no flashear manualmente con ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | Ninguna | Ninguna | Sólo los modelos con [ciertos chips flash](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) son compatibles con ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | Todas las revisiones RTS son compatibles. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: 3 de septiembre de 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: 3 de septiembre de 2019 | <= 11.13.0 | <= 1.4.5 | Todos los flashcarts R4iSDHC 20XX son idénticos. Los modelos de 2013 son incompatibles. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: 3 de septiembre de 2019 | <= 11.13.0 | <= 1.4.5 | Todos los flashcarts R4iSDHC 20XX son idénticos. Los modelos de 2013 son incompatibles. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Viene con ntrboot pre-flasheado** (posee interruptor externo para alternar entre modo ntrboot ("3DS") y modo NDS); no flashear manualmente con ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Los modelos de 2013 son incompatibles. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Los modelos de 2013 son incompatibles. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | Ninguna | Ninguna | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Desconocida | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: 3 de septiembre de 2019 | <= 11.13.0 | <= 1.4.5 | Todos los flashcarts R4iSDHC 20XX son idénticos. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/es_ES/region-changing.txt b/_pages/es_ES/region-changing.txt index f0cc8ccddc..89a1e53e42 100644 --- a/_pages/es_ES/region-changing.txt +++ b/_pages/es_ES/region-changing.txt @@ -17,7 +17,7 @@ Ten en cuenta que si tienes archivos de payloads distintos de `GodMode9.firm` en Este proceso desvinculará tu NNID del sistema, puesto que ya no será compatible con él. Las NNIDs están restringidas a la región de la consola que la creó y no puede ser transferida entre regiones sin [un proceso muy complejo y avanzado](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt) (*En Inglés*). {: .notice--warning} -Después de este proceso, sólo las **New 3DS que nunca antes hayan tenido acceso a la eShop** y **todas las Old 3DS** serán capaces de acceder a la eShop después de crear una nueva NNID en su nueva región. ¡Las New 3DS que cambien de región y que hayan accedido a la eShop en su región original, no pueden crear una nueva NNID y acceder a la eShop en su nueva región! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Ten en cuenta que en ocasiones la eShop inexplicablemente no funcionará para las consolas en las que debería funcionar. Esto es causado por los servidores de Nintendo y realmente no tenemos ningún control sobre ello. Adicionalmente, ten en cuenta que ocasionalmente la eShop de forma inexplicable funcionará en algunas consolas en las que no debería (como algunas New 3DS). La causa para esto es actualmente desconocida. @@ -55,12 +55,34 @@ Ya DEBES tener instalado Luma3DS y boot9strap para usar esto. 1. Copia `FBI.3dsx` a la carpeta `/3ds/` de tu tarjeta SD 1. Vuelve a insertar tu tarjeta SD en tu consola -#### Sección II - CTRTransfer - +#### Section II - NAND Backup 1. Inicia GodMode9 manteniendo presionado (Start) mientras enciendes la consola 1. Si se te pide crear copias de seguridad de archivos esenciales, presiona (A) para hacerlo y luego presiona (A) para continuar una vez que haya terminado 1. Si se te pide fijar la fecha y hora RTC, presiona (A) para hacerlo, luego define la fecha y la hora, y después presiona (A) para continuar + Ten en cuenta que, si tuviste que cambiar la fecha y hora RTC, también deberás cambiar la hora en la Configuración de la consola después de hacer esta guía +1. Presiona el botón (Home) para abrir el menú de acción +1. Selecciona "Scripts..." +1. Selecciona "GM9Megascript" +1. Selecciona "Backup Options" +1. Selecciona "SysNAND Backup" +1. Presiona (A) para confirmar + + Este proceso tomará algún tiempo + + Si te aparece un error, asegúrate de que tienes al menos 1.3GB de espacio libre en tu tarjeta SD +1. Presiona (A) para continuar +1. Presiona (B) para volver al menú principal +1. Selecciona "Exit" +1. Presiona (A) para volver a bloquear los permisos de escritura si se solicita +1. Mantén (R) y presiona (B) al mismo tiempo para extraer la SD +1. Inserta tu tarjeta SD en tu computadora +1. Copia `__sysnand###.bin` y `essential.exefs` desde la carpeta `/gm9/out/` en tu tarjeta SD a una ubicación segura en tu computadora + + Haz copias de seguridad en múltiples sitios (como por ejemplo, en un pendrive o almacenamiento online) + + Estos respaldos podrán prevenir que se inutilice la consola y/o ayudarte a recuperar archivos de la memoria de tu consola si algo sale mal en el futuro +1. Elimina `__sysnand_###.bin` y `__sysnand_###.bin.sha` de la carpeta `/gm9/out/` de tu tarjeta SD después de copiarla +1. Vuelve a insertar tu tarjeta SD en tu consola + + Si tu tarjeta SD no fue detectada, mantén presionado (R) y presiona (B) a la vez para volverla a montar + +#### Section III - CTRTransfer + 1. Ve a `[0:] SDCARD` -> `gm9` 1. Presiona (A) sobre el `.bin` del CTRTransfer para seleccionarlo 1. Selecciona "CTRNAND options..." @@ -87,7 +109,7 @@ Ya DEBES tener instalado Luma3DS y boot9strap para usar esto. + Actualizar la consola teniendo B9S y Luma (lo que acabas de instalar) es seguro + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática" -#### Sección III - Iniciar FBI +#### Section IV - Launching FBI 1. Inicia la aplicación Modo Descarga (este [ícono]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Presiona (L) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina @@ -100,7 +122,7 @@ Ya DEBES tener instalado Luma3DS y boot9strap para usar esto. 1. Inicia la aplicación de Modo Descarga 1. Tu consola debería cargar el Homebrew Launcher -#### Sección IV - Reinstalación de tickets +#### Section V - Reinstalling Tickets Si el script que no encontró tickets del usuario te dice que saltes esta sección, entonces salta esta sección {: .notice--info} @@ -120,14 +142,14 @@ Si el script que no encontró tickets del usuario te dice que saltes esta secci + Presiona (B) para rechazar la instalación de tickets desde CDN. 1. Presiona (Home) para salir de FBI -#### Sección V - Configuración de región +#### Section VI - Region settings 1. Entra a Configuración de la consola 1. Ir a "Otros ajustes", "Perfil", y luego "Configuración de la región" 1. Selecciona un país de la región a la que has cambiado 1. Si se solicita, no necesitas establecer un estado -#### Sección VI - Eliminar la imagen CTRTransfer +#### Section VII - Remove CTRTransfer image 1. Inicia GodMode9 manteniendo presionado (Start) mientras enciendes la consola 1. Ve a `[0:] SDCARD` -> `gm9` diff --git a/_pages/es_ES/restoring-cfw.txt b/_pages/es_ES/restoring-cfw.txt new file mode 100644 index 0000000000..0fbcbbcbe4 --- /dev/null +++ b/_pages/es_ES/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Tabla de contenidos" %} + +### Lectura requerida + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### Qué necesitas +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instrucciones + +#### Sección I - Preparativos + +1. Inserta tu tarjeta SD en tu computadora +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella +1. Vuelve a insertar tu tarjeta SD en tu consola + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: + * **"Show NAND or user string in System Settings"** +1. Presiona (Start) para guardar y reiniciar + +___ + +### Continúa en [Finalizar instalación](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/es_ES/seedminer.txt b/_pages/es_ES/seedminer.txt index 10cd803141..a4d502baf2 100644 --- a/_pages/es_ES/seedminer.txt +++ b/_pages/es_ES/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Tabla de contenidos" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectura requerida -Para instalar boot9strap en tu consola nos aprovecharemos de un descuido existente en las restricciones de seguridad aplicadas a las aplicaciones "DSiWare". +To install boot9strap on your device, we derive your device's unique encryption key. Para lograrlo, utilizaremos una herramienta llamada Seedminer para calcular la clave de encriptación (`movable.sed`) de tu consola. Luego usaremos esta llave de encriptación de DSiWare para desencriptar una aplicación de DSiWare compatible, e inyectar un exploit en ella para así poder ejecutar nuestro propio código (el exploit específico a utilizar dependerá de la región de tu consola). @@ -16,21 +19,7 @@ Este método utiliza una tarjeta gráfica potente para realizar los cálculos ne ### Instrucciones -#### Sección I - Prueba de compatibilidad - -Si bien esta prueba no es estrictamente necesaria para poder ejecutar el exploit Seedminer, los exploits posteriores a éste requieren que la prueba se realice y sería una pérdida de tiempo y esfuerzo ejecutar Seedminer sin ser capaz de ejecutar el resto de exploits. - -Hay varios métodos distintos basados en el exploit de Seednminer, por lo que incluso si esta prueba falla puedes utilizar otro método aún. - -#### Prueba de Gestión de Nintendo DSiWare (para uso en unSAFE_MODE) - -1. Ve a "Configuración de la Consola", luego a "Gestión de Datos", luego a "DSiWare" -1. Si la consola no se traba o cuelga, la prueba fue exitosa - + Si la consola se cuelga y regresa al menú HOME, la prueba falló y tendrás que utilizar un método antiguo; ve al final de la página - + Si la pantalla se pone de un color por un segundo antes de colgarse e ir al menú HOME, entra al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) (en Inglés) y pide a alguien que te ayude -1. Sal al menú HOME - -#### Sección II - Preparativos +#### Sección I - Preparativos 1. Inserta tu tarjeta SD en tu computadora 1. Ve a la carpeta `Nintendo 3DS` en tu tarjeta SD @@ -49,46 +38,46 @@ Hay varios métodos distintos basados en el exploit de Seednminer, por lo que in + Este nombre se conoce también como el "ID0" de tu consola 1. Enciende tu consola 1. Ve a tu Lista de Amigos (el [Icono Naranja con una cara]({{ "/images/friend-list-icon.png" | absolute_url }}) en la fila superior de tu Menú HOME) - + Si recibes un error y eres expulsado del menú, es posible que debas crear un nuevo Mii o tu consola no pueda conectarse a los servidores de Nintendo (debido a un ban o problemas de conexión) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Encuentra el perfil de tu Mii, luego busca donde dice "Código de amigo" en la pantalla superior -#### Sección III - Seedminer +#### Section II - Seedminer 1. Entra a [Bruteforce Movable](https://seedminer.hacks.guide/) en tu computadora + Este sitio puede automatizar la obtención del `movable_part1.sed` (utilizando un bot que simula una consola 3DS) y la ruptura de la encriptación DSiWare de tu consola (utilizando la computadora de un voluntario para ejecutar Seedminer) - + Si el sitio no está operativo, intenta con [éste otro](https://bfm.nintendohomebrew.com/) - + Si ninguno de los dos sitios está operativo, entra al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) y pide a alguien que te ayude (en Inglés) + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Ingresa el código de amigo de tu consola (sin espacios ni guiones) en donde dice "Your friend code" 1. Copia y pega el nombre de 32 caracteres donde dice "Your ID0" + No intentes introducir el ID0 a mano. Asegúrate de que el ID0 se introduzca correctamente copiándolo y pegándolo desde donde lo guardaste en la sección anterior 1. Selecciona "Go" - + Si el sitio se mueve inmediatamente al paso 4, descarga tu archivo `movable.sed` y continúa con la siguiente sección. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. Cuando te lo pida, utiliza el botón de "Añadir amigo" en tu consola para añadir el código de amigo del bot que simula una consola 3DS 1. Espera a que el sitio se actualice + Si no lo hace, espera unos minutos antes de recargar la página una vez 1. Una vez que el sitio procesa tu información, te dará la opción para "Continue" (Continuar) o "Do another device" (Hacer otro dispositivo). Haz click en el botón verde que dice "Continue" 1. Espera a que el resto del proceso termine - + Esto es generalmente rápido (1-5 minutos) pero en algunos casos, puede tomar hasta media hora. - + Durante este proceso, el bot que agregaste podría no ser mostrado en tu 3DS. Mientras no se actualice el sitio web, esto no es un problema. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + Si todavía estás esperando luego de media hora, únete al [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp) (en inglés) y pide ayuda a alguien de allí 1. Cuando el proceso haya finalizado, descarga tu archivo `movable.sed` desde el sitio + Conserva este archivo ya que lo necesitarás en las próximas páginas ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -Éste método con Seedminer, para mejorar el exploit, utiliza tu archivo `movable.sed` para tomar ventaja de exploits en el firmware SAFE_MODE presente en todas las consolas 3DS. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -Este método es compatible con todas las regiones, sin embargo, la región CHN no está cubierta por esta guía. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continúa a [Instalar boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Métodos anteriores +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -Estos métodos son obsoletos y no se recomiendan a menos que se indique lo contrario. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Métodos anteriores](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/es_ES/site-navigation.txt b/_pages/es_ES/site-navigation.txt index ac209d4d91..affb558e99 100644 --- a/_pages/es_ES/site-navigation.txt +++ b/_pages/es_ES/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Populares** + [Finalizar Instalación](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Instalar boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Instalar boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Actualizar con cartucho](cart-update) + [Créditos](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donaciones](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashear ntrboot (Dos consolas 3DS)](flashing-ntrboot-(3ds-multi-system)) + [Flashear ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashear ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Comencemos](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [Usos de GodMode9](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Inicio](/) + [Homebrew Launcher (alternativas)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Instalar boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Instalar boot9strap (Navegador)](installing-boot9strap-(browser)) + [Instalar boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Instalar boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Instalar boot9strap (MSET)](installing-boot9strap-(mset)) + [Instalar boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Instalar boot9strap (SafeB9SInstaller)](installing-boot9strap-(Safeb9sInstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Instalar boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Instalar boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Instalar boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Instalar boot9strap (USM)](installing-boot9strap-(usm)) + [Mover EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Cambio de Región](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Métodos Seedminer anteriores](legacy-methods) + [Solución de Problemas](troubleshooting) + [Desinstalar CFW](uninstall-cfw) + [Actualizar B9S](updating-b9s) diff --git a/_pages/es_ES/updating-b9s.txt b/_pages/es_ES/updating-b9s.txt index 52e72d7320..0902d2e2fe 100644 --- a/_pages/es_ES/updating-b9s.txt +++ b/_pages/es_ES/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Actualizar B9S" # Esta página es para ayudar a los usuarios actuales de boot9strap a actualizar su instalación a la última versión. -{% capture notice-1 %} -Ha habido reportes de olas de baneos a usuarios de CFW por parte de Nintendo. Para protegerte, puedes realizar los siguientes pasos antes de seguir esta guía: - -1. Ve a Configuración de la consola, luego a "Configuración de internet", luego "Envío de información sobre la consola" -1. Desactiva la opción "Envío de información sobre la consola" -1. Sal de la Configuración de la consola -1. Ve a tu Lista de Amigos (el [Icono Naranja con una cara]({{ "/images/friend-list-icon.png" | absolute_url }}) en la fila superior de tu Menú HOME) - + Si recibes un error y eres expulsado del menú, la configuración de la Lista de Amigos ya ha sido deshabilitada o tu consola no se puede conectar a los servidores de Nintendo (debido a un ban o por problemas de conexión) -1. Ve a la configuración de la Lista de amigos, luego a "Notificaciones entre amigos", y luego "Mostrar qué estás jugando" -1. Desactiva la opción "Mostrar qué estás jugando" -1. Sal de tu Lista de amigos - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### Qué necesitas * La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap normal; no el archivo `devkit` ni el archivo `ntr`)* -* La ultima version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La última versión [del Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrucciones @@ -39,9 +25,8 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo existente {: .notice--info} 1. Inserta tu tarjeta SD en tu computadora -1. Copia `boot.3dsx` a la raíz de tu tarjeta SD 1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD -1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD +1. Copia los archivos `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD 1. Copia `SafeB9SInstaller.firm` desde el `.zip` de SafeB9SInstaller a la carpeta `/luma/payloads/` en tu tarjeta SD 1. Vuelve a insertar tu tarjeta SD en tu consola @@ -58,7 +43,7 @@ Para todos los pasos en esta sección, sobreescribe cualquier archivo existente 1. Apaga tu consola 1. Inserta tu tarjeta SD en tu computadora -1. Copia `boot.firm` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD reemplazando el archivo existente +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Vuelve a insertar tu tarjeta SD en tu consola 1. Enciende tu consola diff --git a/_pages/fi_FI/a9lh-to-b9s.txt b/_pages/fi_FI/a9lh-to-b9s.txt index 48d0e11741..54d979f773 100644 --- a/_pages/fi_FI/a9lh-to-b9s.txt +++ b/_pages/fi_FI/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this Purkaaksesi tämän osion `.7z`-tiedostot tarvitset pakkausohjelman, kuten [7-Zip](http://www.7-zip.org/)in tai [The Unarchiver](https://theunarchiver.com/)in. -Jos sinulla on PIN käytössä Luma3DS:ssä, SafeB9SInstaller antaa sinulle "OTP Crypto Fail" -virheen, ellet ota sitä pois käytöstä väliaikaisesti (voit ottaa sen takaisin käyttöön päivityksen jälkeen). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -On käynyt ilmi, että Nintendo jakaa CFW-käyttäjille porttikieltoja verkkotoimintoihinsa. Välttyäksesi tältä tee seuraavat toimet ennen aloittamista: - -1. Mene järjestelmäasetuksiin (System Settings), valitse verkkoasetukset (Internet Settings), sitten "SpotPass" ja sitten järjestelmätietojen lähetys (Sending of System Information) -1. Ota järjestelmätietojen lähetys pois käytöstä -1. Poistu järjestelmäasetuksista -1. Mene kaverilistaan ([oranssi naamakuvake]({{ "/images/friend-list-icon.png" | absolute_url }}) HOME-valikon ylärivillä) - + Jos saat virheilmoituksen etkä pääse kaverilistaan, asetus on jo pois käytöstä tai konsolisi ei voi yhdistää Nintendon palvelimiin (porttikiellon tai yhteysongelmien takia) -1. Mene kaverilistan asetuksiin, valitse "Friend Notification Settings" ja sitten "Show friends what you're playing" -1. Ota "Show friends what you're playing" -asetus pois käytöstä -1. Poistu kaverilistasta - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### Tarpeet Huomaa, että ohjeessa tarvittava `secret_sector.bin`-tiedosto tulee mukana myös useissa `data_input.zip`-pakkauksissa. Jos sinulla on jo kyseinen tiedosto jossakin tallessa, voit käyttää sitä sen sijaan, että lataisit sen alla olevasta linkistä. @@ -42,11 +26,10 @@ Huomaa, että New 3DS:llä `secret_sector.bin`-tiedostoa tarvitaan vain arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Ohjeet @@ -57,8 +40,7 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih 1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi -1. Kopioi `boot.3dsx` SD-korttisi juureen -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Kopioi v7.0.5-Luma3DS-`.zip`-pakkauksesta `arm9loaderhax.bin` SD-korttisi juureen 1. Poista kaikki olemassa olevat `.bin`-käynnistystiedostot SD-korttisi `/luma/payloads/`-kansiosta, sillä ne eivät ole yhteensopivia boot9strap-käyttöisissä Luma3DS-versioissa 1. Kopioi SafeB9SInstaller-`.zip`-pakkauksesta `SafeB9SInstaller.bin` SD-korttisi `/luma/payloads/`-kansioon diff --git a/_pages/fi_FI/bannerbomb3.txt b/_pages/fi_FI/bannerbomb3.txt index 0ac935ac73..14794207b4 100644 --- a/_pages/fi_FI/bannerbomb3.txt +++ b/_pages/fi_FI/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Sisällysluettelo" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Tärkeää tietoa To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/fi_FI/checking-for-cfw.txt b/_pages/fi_FI/checking-for-cfw.txt new file mode 100644 index 0000000000..8e0168c12f --- /dev/null +++ b/_pages/fi_FI/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Ohjeet + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/fi_FI/credits.txt b/_pages/fi_FI/credits.txt index 67c57226b0..613b90905d 100644 --- a/_pages/fi_FI/credits.txt +++ b/_pages/fi_FI/credits.txt @@ -2,6 +2,9 @@ title: "Kiitokset" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Erityiskiitokset kaikille [#Cakey-kanavalla Freenodessa](http://webchat.freenode.net/?channels=%23Cakey)!** {: .notice--primary} @@ -22,7 +25,7 @@ Otathan yhteyttä minuun, jos unohdin sinut tästä, niin lisään nimesi. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Otathan yhteyttä minuun, jos unohdin sinut tästä, niin lisään nimesi. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Otathan yhteyttä minuun, jos unohdin sinut tästä, niin lisään nimesi. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/fi_FI/dsidumper.txt b/_pages/fi_FI/dsidumper.txt index 948dacaed5..9762798a6c 100644 --- a/_pages/fi_FI/dsidumper.txt +++ b/_pages/fi_FI/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Sisällysluettelo" %} - -### Tärkeää tietoa - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### Tarpeet - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Vaihe I – Valmistelut - -1. Sammuta konsolisi -1. Aseta SD-korttisi tietokoneeseesi -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Aseta SD-korttisi takaisin konsoliisi -1. Käynnistä konsolisi - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/fi_FI/faq.txt b/_pages/fi_FI/faq.txt index 1ba13a2265..05f8842275 100644 --- a/_pages/fi_FI/faq.txt +++ b/_pages/fi_FI/faq.txt @@ -6,7 +6,7 @@ title: "UKK" **V:** On. **K:** *Kuinka päivitän Luma3DS:n?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **K:** *Kuulin eräästä jutusta, josta minun pitäisi maksaa (Gateway, Sky3DS jne.). Tarvitsenko sellaista?* **V:** Et. Boot9strap on erinomainen menetelmä ladata hax, joka suoritetaan varhaisessa vaiheessa käynnistystä. diff --git a/_pages/fi_FI/finalizing-setup.txt b/_pages/fi_FI/finalizing-setup.txt index 34e73ef61f..2fc4747c0d 100644 --- a/_pages/fi_FI/finalizing-setup.txt +++ b/_pages/fi_FI/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Asennuksen viimeistely" Latauduttuaan NANDilta boot9strap suorittaa `boot.firm`-tiedoston, joka voi olla mikä tahansa kelvollinen arm9-ohjelma FIRM-muodossa. Tämän tiedoston voi korvata milloin tahansa, joskin Luma3DS sallii muidenkin FIRM-muotoisten arm9-ohjelmien suorittamisen ketjulataajan avulla. -Tässä tapauksessa käytetään [AuroraWright](https://github.com/AuroraWright/)in luomaa Luma3DS:ää käynnistämään paikattu SysNAND suoraan, jolloin minkäänlaista EmuNANDia ei tarvita, mikä yksinkertaistaa hakkeroidun 3DS:n käyttöä sekä säästää tilaa SD-kortilta. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat: + **FBI** *(asentaa CIA-muotoisia pelejä ja sovelluksia)* + **Anemone3DS** *(asentaa mukautettuja teemoja)* + **Checkpoint** *(varmuuskopioi ja palauttaa 3DS- ja DS-pelien tallennuksia)* -+ **Luma3DS Updater** *(päivittää CFW-asennuksesi helposti)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(monikäyttöinen työkalu, jolla voi tehdä NANDiin ja pelikorttiin liittyviä toimintoja)* + **Homebrew Launcher Loader** *(avaa Homebrew Launcherin)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Ohjeet @@ -39,15 +39,16 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat: 1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi 1. Luo `3ds`‑niminen kansio SD‑korttisi juureen, jos sitä ei jo ole olemassa + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Luo `cias`‑niminen kansio SD‑korttisi juureen, jos sitä ei jo ole olemassa 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Kopioi `FBI.3dsx` SD-korttisi `/3ds/`-kansioon 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Kopioi `lumaupdater.cia` SD-korttisi `/cias/`-kansioon 1. Kopioi `FBI.cia` SD-korttisi `/cias/`-kansioon 1. Kopioi `DSP1.cia` SD-korttisi `/cias/`-kansioon 1. Kopioi `Anemone3DS.cia` SD-korttisi `/cias/`-kansioon 1. Kopioi `Checkpoint.cia` SD-korttisi `/cias/`-kansioon +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Luo `payloads`‑niminen kansio SD‑korttisi `luma`-kansioon, jos sitä ei jo ole olemassa 1. Kopioi GodMode9‑`.zip`‑pakkauksesta `GodMode9.firm` SD-korttisi `/luma/payloads/`‑kansioon 1. Kopioi GodMode9-`.zip`-pakkauksesta `gm9`-kansio SD-korttisi juureen @@ -102,7 +103,7 @@ Jos sinulla oli ennen tämän oppaan aloittamista EmuNAND-kokoonpano, ja haluais #### Vaihe VI – Luma3DS:n asentaminen CTRNANDiin 1. Sammuta konsolisi -1. Avaa GodMode9 pitämällä (START)-painiketta pohjassa konsolin käynnistyessä +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Jos ohjelma kehottaa luomaan varmuuskopion tärkeistä tiedostoista (essential files), paina (A):ta tehdäksesi sen, ja kun varmuuskopio on valmis, paina (A):ta uudelleen jatkaaksesi 1. Jos sinua kehotetaan korjaamaan RTC-aika ja -päivämäärä, paina (A):ta ja aseta ne oikein, paina sitten (A):ta jatkaaksesi 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Voit nyt käyttää Luma3DS Updateria päivittääksesi Luma3DS:n viimeisimpään versioon. Avaa vain sovellus ja paina (A):ta. - -Tämä ei ole sama asia kuin järjestelmäpäivitys; toiminto vain lataa ja purkaa uusimmat Luma3DS-tiedostot. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Konsolisi käynistää nyt oletuksena Luma3DS-CFW-SysNANDin. +You will now boot Luma3DS CFW by default. Voit nyt pitää (SELECT)-painiketta pohjassa käynnistyksen aikana avataksesi Luma3DS:n määritysvalikon. @@ -177,7 +168,7 @@ Voit nyt käyttää (L) + (ALAS) + (SELECT) -painikeyhdistelmää, kun konsolisi {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Tietoja GodMode9:n monista ominaisuuksista löydät osiosta [GodMode9:n käyttä Tietoja Luma3DS:n monista ominaisuuksista löydät [sen wikistä](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -Tietoja mukautettujen teemojen ja käynnistysruutujen asentamisesta löydät [Theme Plaza](https://themeplaza.eu/)sta. +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/fi_FI/flashing-ntrboot-(3ds-multi-system).txt b/_pages/fi_FI/flashing-ntrboot-(3ds-multi-system).txt index f74e0a53f0..e808e581fb 100644 --- a/_pages/fi_FI/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/fi_FI/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa ** * Kaksi 3DS-perheen konsolia + **Lähde-3DS**: 3DS-perheen konsoli, jolla on jo asennettuna boot9strap + **Kohde-3DS**: konsoli, jolla on vakiolaiteohjelmisto -* Boot9strapin [viimeisin julkaisu](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr`-boot9strap; ei `devkit`-tiedosto)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Ohjeet diff --git a/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt b/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt index 5825d869b0..60404892a2 100644 --- a/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa ** ### Tarpeet * Ntrboot-yhteensopiva flash-korttisi -* Boot9strapin [viimeisin julkaisu](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr`-boot9strap; ei `devkit`-tiedosto)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Ohjeet diff --git a/_pages/fi_FI/flashing-ntrboot-(nds).txt b/_pages/fi_FI/flashing-ntrboot-(nds).txt index 8531baed96..48498d1b00 100644 --- a/_pages/fi_FI/flashing-ntrboot-(nds).txt +++ b/_pages/fi_FI/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa ** * Kaksi konsolia + **Lähde-NDS/-NDSL**: flash-korttisi kanssa yhteensopiva NIntendo DS tai Nintendo DS Lite + **Kohde-3DS**: 3DS-perheen konsoli, jolla on vakiolaiteohjelmisto -* Boot9strapin [viimeisin julkaisu](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr`-boot9strap; ei `devkit`-tiedosto)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Ohjeet diff --git a/_pages/fi_FI/formatting-sd-(linux).txt b/_pages/fi_FI/formatting-sd-(linux).txt new file mode 100644 index 0000000000..348810d4db --- /dev/null +++ b/_pages/fi_FI/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Tämä sivu on vain Linux-käyttäjille. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Ohjeet +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/fi_FI/formatting-sd-(mac).txt b/_pages/fi_FI/formatting-sd-(mac).txt new file mode 100644 index 0000000000..9a11ff702e --- /dev/null +++ b/_pages/fi_FI/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Tämä sivu on vain Mac-käyttäjille. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Ohjeet + +#### OS X El Capitan (10.11) and later + +1. Aseta SD-korttisi tietokoneeseesi +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Aseta SD-korttisi tietokoneeseesi +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/fi_FI/formatting-sd-(windows).txt b/_pages/fi_FI/formatting-sd-(windows).txt new file mode 100644 index 0000000000..aea9ffe748 --- /dev/null +++ b/_pages/fi_FI/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Tämä sivu on vain Windows-käyttäjille. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Tarpeet + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Ohjeet + +1. Aseta SD-korttisi tietokoneeseesi +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/fi_FI/get-started-(new-3ds).txt b/_pages/fi_FI/get-started-(new-3ds).txt index 01ca0997de..8bf253be8c 100644 --- a/_pages/fi_FI/get-started-(new-3ds).txt +++ b/_pages/fi_FI/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Aloitus (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="Sisällysluettelo" %} ### Tärkeää tietoa -Valitse konsolisi versiota vastaava sivu alta löytyvästä taulukosta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0. +Valitse konsolisi versiota vastaava sivu alta löytyvästä taulukosta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. -Huomaa, että järjestelmäsi versionumeron viimeinen luku (jota edeltää yhdysmerkki) viittaa selaimesi versioon. Tällä hetkellä selaimen versiolla ei ole merkitystä New 3DS:n kannalta tässä oppaassa. - -**Jos et voi seurata versiosi mukaisia ohjeita, koska sen edellytykset eivät täyty, tutustu "Kaikki versiot" -rivillä oleviin menetelmiin, jotka toimivat järjestelmäversiosta riippumatta.** - -Voit myös päivittää järjestelmäsi uudempaan versioon joko [kortti-](cart-update) tai tavallisella päivityksellä, ja jatkaa sitten ohjeiden seuraamista saman sarakkeen kohdalta. - -Konsolisi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksissa (System Settings). +Järjestelmäsi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksissa (System Settings). ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Versiotaulukko - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
VersiostaVersioonVersiostaVersioonAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (SoundHax)
11.4.011.7.0Käytä kaikille versioille soveltuvaa menetelmää11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Boot9strapin asentaminen (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
Kaikki versiot

Ntrboot
(vaatii yhteensopivan flash-kortin)

tai

Boot9strapin asentaminen (laitteistomodaus)
(vaatii juottamista)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/fi_FI/get-started-(old-3ds).txt b/_pages/fi_FI/get-started-(old-3ds).txt index 9e1a5efee9..2eb282445c 100644 --- a/_pages/fi_FI/get-started-(old-3ds).txt +++ b/_pages/fi_FI/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "Aloitus (vanha 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="Sisällysluettelo" %} ### Tärkeää tietoa -Valitse konsolisi versiota vastaava sivu alta löytyvästä taulukosta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0. - -Huomaa, että listan kaksi viimeistä saraketta viittaavat konsolisi versionumeron viimeiseen lukuun (joka vastaa järjestelmään asennetun selaimen versiota). Jos versionumero on -0, järjestelmässäsi ei ole selainta. Mikä tahansa suurempi luku kuin -0 taas kertoo, että selain on asennettuna. - -Esimerkkinä: jos versionumerosi on "5.0.0-0U", sinun tulee seurata "Ei selainta" -saraketta sekä "versiosta 5.0.0 versioon 5.1.0" -riviä, koska järjestelmäsi versio on kyseisellä välillä, eikä siinä ole selainta asennettuna. - -**Jos et voi seurata versiosi mukaisia ohjeita, koska sen edellytykset eivät täyty, tutustu "Kaikki versiot" -rivillä oleviin menetelmiin, jotka toimivat järjestelmäversiosta riippumatta.** - -Voit myös päivittää järjestelmäsi uudempaan versioon joko [kortti-](cart-update) tai tavallisella päivityksellä, ja jatkaa sitten ohjeiden seuraamista saman sarakkeen kohdalta. +Valitse konsolisi versiota vastaava sivu alta löytyvästä taulukosta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Järjestelmäsi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksissa (System Settings). ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Versiotaulukko @@ -33,49 +28,23 @@ Järjestelmäsi versio löytyy yläruudun oikeasta alakulmasta järjestelmäaset - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Versiosta VersioonEi selaintaSelainAction
1.0.02.0.0Käytä kaikille versioille soveltuvaa menetelmää
2.1.02.1.0Käytä kaikille versioille soveltuvaa menetelmääInstalling boot9strap (2xrsa)
2.2.02.2.0Käytä kaikille versioille soveltuvaa menetelmää
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Käytä kaikille versioille soveltuvaa menetelmääInstalling boot9strap (Soundhax)
11.8.011.8.0Boot9strapin asentaminen (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
Kaikki versiot

Ntrboot
(vaatii yhteensopivan flash-kortin)

tai

Boot9strapin asentaminen (laitteistomodaus)
(vaatii juottamista)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/fi_FI/get-started.txt b/_pages/fi_FI/get-started.txt index 7d3b036181..3ab1af3eac 100644 --- a/_pages/fi_FI/get-started.txt +++ b/_pages/fi_FI/get-started.txt @@ -6,85 +6,16 @@ title: "Aloitus" ### Tärkeää tietoa -Valitse konsolisi versiota vastaava sivu alta löytyvästä taulukosta. Huomaa, että versionumerot kentissä "versiosta" ja "versioon" ovat sisältyviä. Tämä tarkoittaa esimerkiksi sitä, että rivi "versiosta 9.0.0 versioon 9.2.0" kattaa versiot 9.0.0, 9.1.0 ja 9.2.0. - -Järjestelmäsi versio löytyy yläruudun oikeasta alakulmasta järjestelmäasetuksissa (System Settings). - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -Voit myös päivittää järjestelmäsi uudempaan versioon joko [kortti-](cart-update) tai tavallisella päivityksellä, ja jatkaa sitten ohjeiden seuraamista saman sarakkeen kohdalta. - -Jos olet jo aikaisemmin hakkeroinut 3DS-konsolisi, ja sinulla on EmuNAND-pohjainen CFW-kokoonpano, seuraa vain kaikkia ohjeita ollessasi SysNANDissa. Korvaa aina kehotettaessa kaikki tiedostot, jotka ovat jo olemassa. Tietosi tullaan siirtämään EmuNANDilta uuteen B9S-asennukseesi lopussa. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -Tämä sivu ohjeistaa boot9strapin asentamisen *muokkaamattomaan* 3DS:ään tai 2DS:ään. Jos sinulla on jo arm9loaderhax ja aiot päivittää sen boot9strapiin, seuraa osiota [A9LH → B9S](a9lh-to-b9s). -{: .notice--primary} - -Ennen aloittamista Windows-käyttäjien kannattaa asettaa tiedostotunnisteiden näyttäminen päälle käyttämällä ohjeita osiossa [Tiedostotunnisteet (Windows)](file-extensions-(windows))! -{: .notice--info} - -Ennen aloittamista kannattaa tarkistaa SD-korttisi virheiden varalta käyttäen jotakin seuraavista ohjelmista: [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), tai [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Versiotaulukko - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
VersiostaVersioonAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
Kaikki versiot

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/fi_FI/godmode9-usage.txt b/_pages/fi_FI/godmode9-usage.txt index cd9877e5d9..09eac73e8e 100644 --- a/_pages/fi_FI/godmode9-usage.txt +++ b/_pages/fi_FI/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9:n käyttäminen" {% include toc title="Sisällysluettelo" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Tärkeää tietoa diff --git a/_pages/fi_FI/home.txt b/_pages/fi_FI/home.txt index c7fb2bec6e..620452361b 100644 --- a/_pages/fi_FI/home.txt +++ b/_pages/fi_FI/home.txt @@ -63,7 +63,7 @@ Luettelon kaikista lasketuista sighaxin allekirjoituksista löydät [tästä gis ## Mitä voin tehdä mukautetulla laiteohjelmistolla? + Pelata kaikkia kortilla julkaistuja sekä eShop-pelejä alueesta riippumatta -+ Mukauttaa HOME-valikkoasi käyttäjien luomilla [teemoilla ja käynnistysruuduilla](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Käyttää "ROM-hackejä" omistamissasi peleissä + Ottaa kuvankaappauksia peleistä ja sovelluksista + Varmuuskopioida, muokata ja palauttaa tallennuksia monille peleille @@ -78,11 +78,11 @@ Luettelon kaikista lasketuista sighaxin allekirjoituksista löydät [tästä gis + **Ennen oppaan aloittamista sinun on tiedettävä 3DS-hakkeroinnin riskit: JOKA kerta, kun muokkaat konsoliasi, on mahdollisuus siihen, että se vioittuu PYSYVÄSTI. Vaikka tämä onkin hyvin epätodennäköistä, seuraa KAIKKIA ohjeita TARKALLEEN.** + Jos olet jo hakkeroinut konsolisi EmuNAND-kokoonpanoa varten, ja haluat siirtää sisältösi uuteen SysNAND-CFW-kokoonpanoon, seuraa kaikkia ohjeita ja palauta EmuNAND osiossa [Asennuksen viimeistely](finalizing-setup), siinä vaiheessa kun ohje siihen kehottaa. -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Jos kaikki menee suunnitelmien mukaan, et menetä mitään tietoja ja päädyt samaan kokoonpanoon, joka sinulla oli alussa (pelit, NNID, tallennukset jne. säilyvät). + Pidä konsolisi latauksessa koko prosessin ajan välttyäksesi tietojen menettämiseltä tai odottamattomasta sammumisesta aiheutuvalta vahingolta! + SD-korttisi osiointimallin on oltava [MBR, ei GPT](http://www.howtogeek.com/245610/) (konsolin mukana tulevassa kortissa se on oletuksena MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/fi_FI/homebrew-launcher-(browserhax-2020).txt b/_pages/fi_FI/homebrew-launcher-(browserhax-2020).txt index 1cee8d9437..487f25a45c 100644 --- a/_pages/fi_FI/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/fi_FI/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Sisällysluettelo" %} - -### Tärkeää tietoa - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### Tarpeet - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Ohjeet - -#### Vaihe I – Valmistelut - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/fi_FI/homebrew-launcher-(pichaxx).txt b/_pages/fi_FI/homebrew-launcher-(pichaxx).txt index 8c18f70a0d..2032524f78 100644 --- a/_pages/fi_FI/homebrew-launcher-(pichaxx).txt +++ b/_pages/fi_FI/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Sisällysluettelo" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Tärkeää tietoa This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Ohjeet @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Kopioi `boot.3dsx` SD-korttisi juureen 1. Kopioi otherapp-tiedosto SD-korttisi juureen ja uudelleennimeä se muotoon `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Luo `3ds`‑niminen kansio SD‑korttisi juureen, jos sitä ei jo ole olemassa #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Sammuta konsolisi ___ diff --git a/_pages/fi_FI/homebrew-launcher-(soundhax).txt b/_pages/fi_FI/homebrew-launcher-(soundhax).txt index b22370a71a..30cfa8e396 100644 --- a/_pages/fi_FI/homebrew-launcher-(soundhax).txt +++ b/_pages/fi_FI/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Varmista, että langaton yhteys on päällä, sillä udsploit (käytetään seur Huomaa, että korttipäivitykset tuovat päivityksiä vain konsolin ydinominaisuuksiin, kuten järjestelmäasetuksiin, HOME-valikkoon jne. Korttipäivitykset eivät tuo päivityksiä Nintendo 3DS Soundiin eivätkä verkko-ominaisuuksiin, kuten tiedonsiirtosovellukseen, selaimeen, StreetPass Mii Plazaan tai eShopiin. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Tarvitset [vaihtoehtoisen tavan](homebrew-launcher-(alternatives)) Homebrew Launcherin avaamiseen! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Tarvitset [vaihtoehtoisen tavan](homebrew-launcher-(alternatives)) Homebrew Launcherin avaamiseen! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### Tarpeet * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Ohjeet diff --git a/_pages/fi_FI/homebrew-launcher-(steelhax).txt b/_pages/fi_FI/homebrew-launcher-(steelhax).txt index 5336130447..65ec1b9a69 100644 --- a/_pages/fi_FI/homebrew-launcher-(steelhax).txt +++ b/_pages/fi_FI/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Sisällysluettelo" %} - -### Tärkeää tietoa - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### Tarpeet - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Ohjeet - -#### Vaihe I – Valmistelut - -1. Luo `3ds`‑niminen kansio SD‑korttisi juureen, jos sitä ei jo ole olemassa -1. Kopioi `boot.3dsx` SD-korttisi juureen -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Sammuta konsolisi -1. Aseta SD-korttisi tietokoneeseesi -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Aseta SD-korttisi takaisin konsoliisi -1. Käynnistä konsolisi -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/fi_FI/installing-boot9strap-(browser).txt b/_pages/fi_FI/installing-boot9strap-(browser).txt index b81753181d..626f250f88 100644 --- a/_pages/fi_FI/installing-boot9strap-(browser).txt +++ b/_pages/fi_FI/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Boot9strapin asentaminen (selain)" {% include toc title="Sisällysluettelo" %} +### Tärkeää tietoa + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### Tarpeet +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Ohjeet @@ -16,24 +24,21 @@ title: "Boot9strapin asentaminen (selain)" 1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Luo `boot9strap`-niminen kansio SD-korttisi juureen -1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon -1. Kopioi SafeB9SInstaller-`.zip`-pakkauksesta `SafeB9SInstaller.dat` ja `Launcher.dat` SD-korttisi juureen - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi #### Vaihe II – SafeB9SInstallerin avaaminen -1. Avaa konsolisi selain ja mene johonkin seuraavista osoitteista: - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Käynnistä konsolisi +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + Jos saat virheen, [seuraa tätä vianmääritysohjetta](troubleshooting#selainpohjainen-käynnistystapa-ei-toimi) 1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua @@ -50,7 +55,6 @@ title: "Boot9strapin asentaminen (selain)" 1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön: + **"Show NAND or user string in System Settings"** 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen - + Jos saat virheen, jatka vain seuraavaan osioon ___ diff --git a/_pages/fi_FI/installing-boot9strap-(fredtool).txt b/_pages/fi_FI/installing-boot9strap-(fredtool).txt index 221e3705f0..30741a4303 100644 --- a/_pages/fi_FI/installing-boot9strap-(fredtool).txt +++ b/_pages/fi_FI/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Sisällysluettelo" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Tärkeää tietoa This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ Tämä menetelmä käyttää FIRM-osioiden salaamatonta muotoa (known-plaintext, ### Tarpeet -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Vaihe I – Valmistelut @@ -28,18 +31,18 @@ Tämä menetelmä käyttää FIRM-osioiden salaamatonta muotoa (known-plaintext, #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi diff --git a/_pages/fi_FI/installing-boot9strap-(frogtool).txt b/_pages/fi_FI/installing-boot9strap-(frogtool).txt index 06af631d1c..e539af0406 100644 --- a/_pages/fi_FI/installing-boot9strap-(frogtool).txt +++ b/_pages/fi_FI/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Sisällysluettelo" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Tärkeää tietoa We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Vaihe I – Valmistelut 1. Aseta SD-korttisi tietokoneeseesi 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Aseta SD-korttisi takaisin konsoliisi @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Valitse "Miscellaneous options" +1. Valitse "Switch the hb. title to the current app." +1. Paina (B):tä jatkaaksesi +1. Paina (B):tä palataksesi Rosalinan päävalikkoon +1. Paina (B):tä poistuaksesi Rosalina-valikosta +1. Paina (HOME)-painiketta ja sulje Download Play +1. Relaunch the Download Play application +1. Konsolisi pitäisi avata Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Jatka osioon [Asennuksen viimeistely](finalizing-setup) diff --git a/_pages/fi_FI/installing-boot9strap-(hardmod).txt b/_pages/fi_FI/installing-boot9strap-(hardmod).txt index 221dce35ed..d6e12a0336 100644 --- a/_pages/fi_FI/installing-boot9strap-(hardmod).txt +++ b/_pages/fi_FI/installing-boot9strap-(hardmod).txt @@ -23,7 +23,7 @@ Tämä toimii *kaikilla* versioilla New 3DS:llä, New 2DS:llä, vanhalla 3DS:ll * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows-käyttäjät voivat käyttää käännettyä `.exe`-tiedostoa, Mac- ja Linux-käyttäjät taas tarvitsevat [Python 3](https://www.python.org/downloads/):n suorittaakseen `.py`-tiedoston -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * Konsolisi mallin ja alueen mukainen `.firm`-tiedosto: | Versio(t) | Käyttö­järjestelmä­ydin| Vanha 3DS tai vanha 2DS | New 3DS tai New 2DS | diff --git a/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt b/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt index 55bca7b2ab..a42d09cecd 100644 --- a/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt +++ b/_pages/fi_FI/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Sisällysluettelo" %} - -### Tärkeää tietoa - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Tarpeet - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Vaihe I – Valmistelut - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Vaihe III – Luma3DS:n määrittäminen - -1. Your device should automatically show the Luma Configuration menu -1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön: - + **"Show NAND or user string in System Settings"** -1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Avaa Download Play -sovellus -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Valitse "Miscellaneous options" -1. Valitse "Switch the hb. title to the current app." -1. Paina (B):tä jatkaaksesi -1. Paina (B):tä palataksesi Rosalinan päävalikkoon -1. Paina (B):tä poistuaksesi Rosalina-valikosta -1. Paina (HOME)-painiketta ja sulje Download Play -1. Relaunch the Download Play application -1. Konsolisi pitäisi avata Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Jatka osioon [Asennuksen viimeistely](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt index 9961afd803..db0c6434e4 100644 --- a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt +++ b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * Magneetti, jolla voit asettaa konsolisi lepotilaan (jos käytössä on läpällinen malli) * Flash-korttisi, jolla on asennettuna ntrboot * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Ohjeet #### Vaihe I – Valmistelut 1. Sammuta konsolisi -1. Aseta konsolisi SD-kortti tietokoneeseesi +1. Insert your console's SD card into your computer + Tämä tarkoittaa siis 3DS:si SD-korttia, *ei* flash-korttisi SD-korttia -1. Kopioi `SafeB9SInstaller.firm` SD-korttisi juureen ja uudelleennimeä se siellä muotoon `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Luo `boot9strap`-niminen kansio SD-korttisi juureen -1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Aseta SD-korttisi takaisin konsoliisi +1. Reinsert your SD card into your 3DS 1. Käynnistä konsolisi #### Vaihe II – Ntrboot diff --git a/_pages/fi_FI/installing-boot9strap-(pichaxx).txt b/_pages/fi_FI/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..77251c9631 --- /dev/null +++ b/_pages/fi_FI/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Sisällysluettelo" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Tärkeää tietoa + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### Tarpeet + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Ohjeet + +#### Vaihe I – Valmistelut + +1. Sammuta konsolisi +1. Aseta SD-korttisi tietokoneeseesi +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Luo `boot9strap`-niminen kansio SD-korttisi juureen +1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Aseta SD-korttisi takaisin konsoliisi +1. Käynnistä konsolisi +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Vaihe III – Boot9strapin asentaminen + +1. Odota, kunnes kaikki turvatarkistukset on suoritettu +1. Syötä kehotettaessa annettu painikeyhdistelmä asentaaksesi boot9strapin +1. Kun toiminto on suoritettu, paina (A):ta käynnistääksesi konsolisi uudelleen + +#### Vaihe IV – Luma3DS:n määrittäminen + +1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Jos saat mustan ruudun, [seuraa tätä vianmääritysohjetta](troubleshooting#musta-ruutu-boot9strapin-asentamisen-jälkeen-kun-sysnand-on-käynnistetty) +1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön: + + **"Show NAND or user string in System Settings"** +1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + + Jos saat virheen, jatka vain seuraavaan osioon + +___ + +### Jatka osioon [Asennuksen viimeistely](finalizing-setup) +{: .notice--primary} diff --git a/_pages/fi_FI/installing-boot9strap-(safecerthax).txt b/_pages/fi_FI/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..17a19a48d7 --- /dev/null +++ b/_pages/fi_FI/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### Tarpeet + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Ohjeet + +#### Vaihe I – Valmistelut +1. Sammuta konsolisi +1. Aseta SD-korttisi tietokoneeseesi +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Luo `boot9strap`-niminen kansio SD-korttisi juureen +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Aseta SD-korttisi takaisin konsoliisi +1. Käynnistä konsolisi + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Sammuta konsolisi + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Odota, kunnes kaikki turvatarkistukset on suoritettu +1. Syötä kehotettaessa annettu painikeyhdistelmä asentaaksesi boot9strapin +1. Kun toiminto on suoritettu, paina (A):ta käynnistääksesi konsolisi uudelleen + +#### Section V - Configuring Luma3DS + +1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Jos saat mustan ruudun, [seuraa tätä vianmääritysohjetta](troubleshooting#musta-ruutu-boot9strapin-asentamisen-jälkeen-kun-sysnand-on-käynnistetty) +1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön: + + **"Show NAND or user string in System Settings"** +1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Sammuta konsolisi + +___ + +### Jatka osioon [Asennuksen viimeistely](finalizing-setup) +{: .notice--primary} diff --git a/_pages/fi_FI/installing-boot9strap-(soundhax).txt b/_pages/fi_FI/installing-boot9strap-(soundhax).txt index 6b48c3da49..1f8ca98aa8 100644 --- a/_pages/fi_FI/installing-boot9strap-(soundhax).txt +++ b/_pages/fi_FI/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Tärkeää tietoa -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Huomaa, että korttipäivitykset tuovat päivityksiä vain konsolin ydinominaisuuksiin, kuten järjestelmäasetuksiin, HOME-valikkoon jne. Korttipäivitykset eivät tuo päivityksiä Nintendo 3DS Soundiin eivätkä verkko-ominaisuuksiin, kuten tiedonsiirtosovellukseen, selaimeen, StreetPass Mii Plazaan tai eShopiin. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### Tarpeet * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Ohjeet @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi 1. Kopioi SoundHax-`.m4a`-tiedosto SD-korttisi juureen -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Kopioi `boot.3dsx` SD-korttisi juureen +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Luo `boot9strap`-niminen kansio SD-korttisi juureen 1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + Jos et käy vinkkejä läpi ennen SoundHaxin suorittamista, näkyvät ne uudestaan joka kerralla kun avaat Nintendo 3DS Soundin 1. Mene hakemistoon `/SDCARD` ja toista tiedosto "<3 nedwill 2016" + Tämä saattaa vaatia useita yrityksiä - + Jos ohjelma jumiutuu, pakota konsoli sulkeutumaan pitämällä virtapainiketta pohjassa ja yritä sitten uudelleen + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/fi_FI/installing-boot9strap-(ssloth-browser).txt b/_pages/fi_FI/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..3c4a36e515 --- /dev/null +++ b/_pages/fi_FI/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### Tarpeet + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Vaihe I – Valmistelut + +1. Sammuta konsolisi +1. Aseta SD-korttisi tietokoneeseesi +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Luo `boot9strap`-niminen kansio SD-korttisi juureen +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Aseta SD-korttisi takaisin konsoliisi +1. Käynnistä konsolisi + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Sammuta konsolisi + +#### Section III - Launching SafeB9SInstaller +1. Käynnistä konsolisi +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Jos saat virheen, [seuraa tätä vianmääritysohjetta](troubleshooting#selainpohjainen-käynnistystapa-ei-toimi) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. Jos haavoittuvuuden hyödyntäminen onnistui, SafeB9SInstallerin pitäisi avautua + +#### Section IV - Installing boot9strap + +1. Odota, kunnes kaikki turvatarkistukset on suoritettu +1. Syötä kehotettaessa annettu painikeyhdistelmä asentaaksesi boot9strapin +1. Kun toiminto on suoritettu, paina (A):ta käynnistääksesi konsolisi uudelleen + +#### Section V - Configuring Luma3DS + +1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon + + Jos saat mustan ruudun, [seuraa tätä vianmääritysohjetta](troubleshooting#musta-ruutu-boot9strapin-asentamisen-jälkeen-kun-sysnand-on-käynnistetty) +1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön: + + **"Show NAND or user string in System Settings"** +1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Sammuta konsolisi + +___ + +### Jatka osioon [Asennuksen viimeistely](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/fi_FI/installing-boot9strap-(usm).txt b/_pages/fi_FI/installing-boot9strap-(usm).txt index fa8bb3d16f..c632d2501e 100644 --- a/_pages/fi_FI/installing-boot9strap-(usm).txt +++ b/_pages/fi_FI/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Sisällysluettelo" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Tärkeää tietoa In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### Tarpeet * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Vaihe I – Valmistelut -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Aseta SD-korttisi tietokoneeseesi 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Vaihe IV – Luma3DS:n määrittäminen @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/fi_FI/legacy-methods.txt b/_pages/fi_FI/legacy-methods.txt index 551447017f..dd47ecb52a 100644 --- a/_pages/fi_FI/legacy-methods.txt +++ b/_pages/fi_FI/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/fi_FI/ntrboot.txt b/_pages/fi_FI/ntrboot.txt index 7f02936ffe..78cf6bef21 100644 --- a/_pages/fi_FI/ntrboot.txt +++ b/_pages/fi_FI/ntrboot.txt @@ -17,23 +17,23 @@ Huomaa, että "aikapommin" sisältävät kortit eivät voi enää avata `.nds`-t | Flash-kortin nimi | Nykyinen hinta | "Aika­pommi"? | 3DS-versiot? | DSi-versiot? | Muita huomioita | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013-mallit eivät ole yhteensopivia. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013-mallit eivät ole yhteensopivia. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013-mallit eivät ole yhteensopivia. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013-mallit eivät ole yhteensopivia. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | Ei | Ei mikään | Ei mikään | | | **R4i Gold 3DS Deluxe "Starter"** | | Ei | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | Ei | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/fi_FI/region-changing.txt b/_pages/fi_FI/region-changing.txt index 21451d1675..792d383004 100644 --- a/_pages/fi_FI/region-changing.txt +++ b/_pages/fi_FI/region-changing.txt @@ -17,7 +17,7 @@ Huomaa, että jos sinulla on muita käynnistystiedostoja kuin `GodMode9.firm` SD Tämä prosessi poistaa NNID:si linkityksen konsolistasi, koska se ei alueen vaihdon jälkeen ole enää yhteensopiva. NNID:t ovat lukittuja siihen konsolisi alueeseen, jolla ne luotiin, eikä niitä voi siirtää alueiden välillä ilman [todella monimutkaista ja vaativaa prosessia](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -Tämän prosessin jälkeen ainoastaan **New 3DS:t, joilla ei ole koskaan käyty eShopissa**, sekä **mitkä tahansa vanhat 3DS:t** pääsevät eShopiin, kun uusi NNID on luotu uudelle alueelle. Aluevaihdetut New 3DS:t, joilla on jo käyty eShopissa niiden alkuperäisellä alueella, eivät voi luoda uutta NNID:tä eivätkä pääse eShopiin! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Huomaa, että toisinaan eShop ei syystä tai toisesta toimi edes niillä konsoleilla, joilla sen pitäisi. Tämä on täysin Nintendon palvelimien vika, enkä minä voi hallita niitä. Joskus saattaa myös käydä toisinpäin: eli eShop voi toimia konsoleilla, joilla sen ei pitäisi (kuten jotkin New 3DS:t). Syytä tälle ei tällä hetkellä tiedetä. @@ -55,12 +55,34 @@ Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi 1. Kopioi `FBI.3dsx` SD-korttisi `/3ds/`-kansioon 1. Aseta SD-korttisi takaisin konsoliisi -#### Vaihe II – CTRTransfer - +#### Section II - NAND Backup 1. Avaa GodMode9 pitämällä (START)-painiketta pohjassa konsolin käynnistyessä 1. Jos ohjelma kehottaa luomaan varmuuskopion tärkeistä tiedostoista (essential files), paina (A):ta tehdäksesi sen, ja kun varmuuskopio on valmis, paina (A):ta uudelleen jatkaaksesi 1. Jos sinua kehotetaan korjaamaan RTC-aika ja -päivämäärä, paina (A):ta ja aseta ne oikein, paina sitten (A):ta jatkaaksesi + Huomaa, että jos jouduit korjaamaan RTC-ajan ja -päivämäärän, sinun täytyy korjata ne myös järjestelmäasetuksista (System Settings) näiden ohjeiden jälkeen +1. Paina (HOME)-painiketta näyttääksesi toimintovalikon +1. Valitse "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Paina (A)-painiketta vahvistaaksesi + + Tämä prosessi voi kestää jonkin aikaa + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Paina (A):ta jatkaaksesi +1. Paina (B):tä palataksesi päävalikkoon +1. Select "Exit" +1. Paina (A):ta lukitaksesi kirjoitusoikeudet kehotettaessa +1. Pidä (R):ää pohjassa ja paina samalla (B):tä irrottaaksesi SD-korttisi +1. Aseta SD-korttisi tietokoneeseesi +1. Kopioi `__sysnand_###.bin` ja `essential.exefs` SD-korttisi `/gm9/out/`-kansiosta turvalliseen paikkaan tietokoneellasi + + Varmuuskopioi useaan eri paikkaan (kuten pilvipalveluihin) + + Nämä varmuuskopiot pelastavat sinut konsolin vioittumiselta ja/tai auttavat palauttamaan tiedostoja NAND-näköistiedostosta, jos jokin menee pieleen tulevaisuudessa +1. Kun olet varmuuskopioinut NANDin, poista `__sysnand_###.bin` ja `__sysnand_###.bin.sha` SD-korttisi `/gm9/out/`-kansiosta +1. Aseta SD-korttisi takaisin konsoliisi + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Mene hakemistoon `[0:] SDCARD` → `gm9` 1. Paina (A):ta CTRTransfer-`.bin`-tiedoston kohdalla valitaksesi sen 1. Valitse "CTRNAND options..." @@ -73,7 +95,7 @@ Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi 1. Paina (B):tä kieltäytyäksesi lukitsemasta kirjoitusoikeuksia kehotettaessa 1. Paina (B):tä kahdesti palataksesi päävalikkoon 1. Paina (HOME)-painiketta näyttääksesi toimintovalikon -1. Valitse "Scripts..." +1. Select "Scripts..." 1. Select "GM9Megascript" 1. Select "Scripts from Plailect's Guide" 1. Select "CTRTransfer Ticket Copy" @@ -87,7 +109,7 @@ Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi + Päivitykset B9S + Luma -kokoonpanolla (joka sinulla on) ovat turvallisia + Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista -#### Vaihe III – FBI:n avaaminen +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Paina (L)-, (ALAS)- ja (SELECT)-painikkeita samaan aikaan avataksesi Rosalina-valikon @@ -100,7 +122,7 @@ Sinulla TÄYTYY olla asennettuna sekä Luma3DS että boot9strap käyttääksesi 1. Avaa Download Play -sovellus 1. Konsolisi pitäisi avata Homebrew Launcher -#### Vaihe IV – Tikettien uudelleenasentaminen +#### Section V - Reinstalling Tickets Jos ohjelma ei löytänyt käyttäjän asentamia tikettejä käskien ohittamaan tämän vaiheen, ohita tämä vaihe. {: .notice--info} @@ -120,19 +142,19 @@ Jos ohjelma ei löytänyt käyttäjän asentamia tikettejä käskien ohittamaan + Paina (B):tä hylätäksesi tikettien asentamisen CDN:n kautta. 1. Paina (HOME)-painiketta ja sulje FBI -#### Vaihe V – Alueasetukset +#### Section VI - Region settings 1. Avaa järjestelmäasetukset (System Settings) 1. Mene muihin asetuksiin (Other Settings), valitse profiili (Profile) ja sitten alueasetukset (Region Settings) 1. Valitse maa, joka vastaa sitä aluetta, johon vaihdoit 1. Aseta kehotettaessa myös osavaltio/lääni -#### Vaihe VI – CTRTransfer-näköistiedoston poistaminen +#### Section VII - Remove CTRTransfer image 1. Avaa GodMode9 pitämällä (START)-painiketta pohjassa konsolin käynnistyessä 1. Mene hakemistoon `[0:] SDCARD` → `gm9` 1. Paina (X):ää CTRTransfer-`.bin`-näköistiedoston kohdalla poistaaksesi sen -1. Paina (A)-painiketta vahvistaaksesi +1. Paina (A):ta vahvistaaksesi 1. Paina (START)-painiketta käynnistääksesi uudelleen ___ diff --git a/_pages/fi_FI/restoring-cfw.txt b/_pages/fi_FI/restoring-cfw.txt new file mode 100644 index 0000000000..b6180a4ad8 --- /dev/null +++ b/_pages/fi_FI/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Sisällysluettelo" %} + +### Tärkeää tietoa + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### Tarpeet +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Ohjeet + +#### Vaihe I – Valmistelut + +1. Aseta SD-korttisi tietokoneeseesi +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Aseta SD-korttisi takaisin konsoliisi + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Käytä (A):ta ja ristiohjainta ottaaksesi seuraavat asetukset käyttöön: + * **"Show NAND or user string in System Settings"** +1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen + +___ + +### Jatka osioon [Asennuksen viimeistely](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/fi_FI/seedminer.txt b/_pages/fi_FI/seedminer.txt index 1c3a91efdd..b13c19d266 100644 --- a/_pages/fi_FI/seedminer.txt +++ b/_pages/fi_FI/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Sisällysluettelo" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Tärkeää tietoa -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Ohjeet -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Vaihe I – Valmistelut 1. Aseta SD-korttisi tietokoneeseesi 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Käynnistä konsolisi 1. Mene kaverilistaan ([oranssi naamakuvake]({{ "/images/friend-list-icon.png" | absolute_url }}) HOME-valikon ylärivillä) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/fi_FI/site-navigation.txt b/_pages/fi_FI/site-navigation.txt index 61b11e911c..52c4abca4b 100644 --- a/_pages/fi_FI/site-navigation.txt +++ b/_pages/fi_FI/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Suositut** + [Asennuksen viimeistely](finalizing-setup) -+ [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Korttipäivitys](cart-update) + [Kiitokset](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Lahjoitukset](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Ntrbootin asentaminen (monta 3DS:ää)](flashing-ntrboot-(3ds-multi-system)) + [Ntrbootin asentaminen (DSi)](flashing-ntrboot-(dsi)) + [Ntrbootin asentaminen (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Aloitus](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9:n käyttäminen](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Etusivu](/) + [Homebrew Launcher (muut käynnistystavat)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Boot9strapin asentaminen (selain)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Boot9strapin asentaminen (laitteistomodaus)](installing-boot9strap-(hardmod)) + [Boot9strapin asentaminen (MSET)](installing-boot9strap-(mset)) + [Boot9strapin asentaminen (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [EmuNANDin siirtäminen](move-emunand) + [ntrboot](ntrboot) + [Alueen vaihtaminen](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Vianmääritys](troubleshooting) + [CFW:n poistaminen](uninstall-cfw) + [B9S:n päivittäminen](updating-b9s) diff --git a/_pages/fi_FI/updating-b9s.txt b/_pages/fi_FI/updating-b9s.txt index 05f28800d1..efc7bfd592 100644 --- a/_pages/fi_FI/updating-b9s.txt +++ b/_pages/fi_FI/updating-b9s.txt @@ -8,28 +8,14 @@ title: "B9S:n päivittäminen" Tämä sivu on boot9strap-käyttäjille, jotka haluavat päivittää asennuksensa viimeisimpään versioon. -{% capture notice-1 %} -On käynyt ilmi, että Nintendo jakaa CFW-käyttäjille porttikieltoja verkkotoimintoihinsa. Välttyäksesi tältä tee seuraavat toimet ennen aloittamista: - -1. Mene järjestelmäasetuksiin (System Settings), valitse verkkoasetukset (Internet Settings), sitten "SpotPass" ja sitten järjestelmätietojen lähetys (Sending of System Information) -1. Ota järjestelmätietojen lähetys pois käytöstä -1. Poistu järjestelmäasetuksista -1. Mene kaverilistaan ([oranssi naamakuvake]({{ "/images/friend-list-icon.png" | absolute_url }}) HOME-valikon ylärivillä) - + Jos saat virheilmoituksen etkä pääse kaverilistaan, asetus on jo pois käytöstä tai konsolisi ei voi yhdistää Nintendon palvelimiin (porttikiellon tai yhteysongelmien takia) -1. Mene kaverilistan asetuksiin, valitse "Friend Notification Settings" ja sitten "Show friends what you're playing" -1. Ota "Show friends what you're playing" -asetus pois käytöstä -1. Poistu kaverilistasta - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### Tarpeet * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Ohjeet @@ -39,7 +25,6 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih {: .notice--info} 1. Aseta SD-korttisi tietokoneeseesi -1. Kopioi `boot.3dsx` SD-korttisi juureen 1. Luo `boot9strap`-niminen kansio SD-korttisi juureen 1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon 1. Kopioi SafeB9SInstaller-`.zip`-pakkauksesta `SafeB9SInstaller.firm` SD-korttisi `/luma/payloads/`-kansioon @@ -58,7 +43,7 @@ Korvaa mahdolliset olemassa olevat tiedostot SD-kortillasi kaikissa tämän vaih 1. Sammuta konsolisi 1. Aseta SD-korttisi tietokoneeseesi -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Aseta SD-korttisi takaisin konsoliisi 1. Käynnistä konsolisi diff --git a/_pages/fr_FR/a9lh-to-b9s.txt b/_pages/fr_FR/a9lh-to-b9s.txt index 0988a34c15..90e6590ca2 100644 --- a/_pages/fr_FR/a9lh-to-b9s.txt +++ b/_pages/fr_FR/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ Pour utiliser les liens suivants [magnet](https://fr.wikipedia.org/wiki/Magnet_( Pour extraire les fichiers `.7z` sur cette page, vous aurez besoin d'un programme d'archives comme [7-Zip](http://www.7-zip.org/) ou [The Unarchiver](https://theunarchiver.com). -Si vous avez un code PIN d'actif sur Luma3DS, SafeB9SInstaller vous donnera l'erreur "OTP Crypto Fail" tant que vous n'aurez pas désactiver votre code PIN (vous pouvez le réactiver après la mise à jour). +Bien que nous pensons que le custom firmware est sûr pour un utilisation en ligne, des cas de bannissements ont été rapportés dans le passé, principalement à cause de tricherie en ligne ou d'un comportement suspect de l'eShop. {: .notice--warning} -{% capture notice-1 %} -Il y a eu des informations concernant une vague de bannissements contre les utilisateurs de CFW par Nintendo. Pour vous protéger, merci de bien faire les étapes suivantes avant de commencer ce guide: - -1. Allez dans les paramètres de la console, puis dans les "Paramètres Internet", puis dans "SpotPass" puis "Envoi d'informations système" -1. Désactiver l'option "Envoyer des informations système" -1. Sortez des paramètres système -1. Accédez à votre liste d’ami ([icône de visage orange] ({{"/images/friend-list-icon.png" | absolute_url}}) dans la rangée du haut de votre Menu HOME) - + Si vous obtenez un message d’erreur et êtes sorti du menu de force, soit la liste d’ami est déjà désactivée soit votre console ne peut pas se connecter aux serveurs de Nintendo (en raison d’un ban ou un problème de connexion) -1. Allez dans les paramètres de la liste d’ami, puis "Notification à vos amis", puis "Afficher le titre du logiciel que vous utilisez" -1. Désactivez l'option "Afficher le titre du logiciel que vous utilisez" -1. Sortez votre Liste d’amis - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ## Ce dont vous avez besoin Notez que le fichier requis nommé `secret_sector.bin` est le même que celui se trouvant dans les différentes versions du fichier `data_input.zip`. Si vous avez déjà ce fichier sur votre disque quelque part, vous pouvez utiliser celui-là au lieu de télécharger celui se trouvant sur cette page. @@ -42,11 +26,10 @@ Notez que, seulement sur New 3DS, `secret_sector.bin` est nécessaire pour reven {: .notice--info} * - **Seulement pour les utilisateurs d'une New 3DS:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La version 7.0.5 de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(le fichier `.7z`)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) +* La version v7.0.5 de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(le fichier `.7z`)* * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, ni le fichier `devkit`, ni le fichier `ntr`)* -* La dernière version de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* ### Instructions @@ -57,8 +40,7 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants 1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur -1. Copiez `boot.3dsx` à la racine de votre carte SD -1. Copiez `boot.firm` du fichier `.zip` de la dernière version de Luma3DS vers la racine de votre carte SD +1. Copiez `boot.firm` et` boot.3dsx` depuis le fichier `.zip` de la dernière version de Luma3DS vers la racine de votre carte SD 1. Copier `arm9loaderhax.bin` du fichier `.7z` de la version 7.0.5 de Luma3DS vers la racine de votre carte SD 1. Supprimez tout fichier payloads `.bin` existant dans le dossier `/luma/payloads/` de votre carte SD car ils ne seront pas compatibles avec les versions de Luma3DS compatibles avec boot9strap 1. Copiez `SafeB9SInstaller.bin` du fichier `.zip` de SafeBS9Installer vers le dossier `/luna/payloads/` de votre carte SD diff --git a/_pages/fr_FR/bannerbomb3.txt b/_pages/fr_FR/bannerbomb3.txt index 8dc008cd7c..691c0f837d 100644 --- a/_pages/fr_FR/bannerbomb3.txt +++ b/_pages/fr_FR/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table des matières" %} +Les méthodes basées sur Seedminer ont été remplacées par des méthodes plus simples et plus sûres. Veuillez retourner à [Bien Démarrer](get-started) à moins que vous n'ayez une raison légitime de suivre cette page (si vos boutons L et R sont cassés). +{: .notice--warning} + ### Lecture requise Pour extraire un DSiWare système, nous exploitons une faille dans l'onglet de gestion des données DSiWare présent dans les paramètres système. @@ -17,7 +20,7 @@ Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée ind * Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Ouvrez [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) sur votre ordinateur +1. Ouvrez [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) sur votre ordinateur 1. Téléchargez votre movable.sed en utilisant l'option "Choisir le fichier" 1. Cliquez sur "Go" + Ceci téléchargera un DSiWare d'exploit nommé `F00D43D5.bin` dans un fichier zip (`tadmuffin_out.zip`) diff --git a/_pages/fr_FR/checking-for-cfw.txt b/_pages/fr_FR/checking-for-cfw.txt new file mode 100644 index 0000000000..c94dcf89aa --- /dev/null +++ b/_pages/fr_FR/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Vérification de la présence d'un CFW" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +Il s'agit d'une section complémentaire pour vérifier si votre console possède déjà un custom firmware moderne. + +Si votre console possède déjà un custom firmware basé sur arm9loaderhax ou boot9strap, vous devrez suivre les instructions indiquées pour mettre à jour votre configuration vers une configuration moderne. + +Si votre console a une configuration CFW basée sur menuhax, vous devriez [effacer l'extdata de votre Menu HOME](troubleshooting#clear-home-menu-extdata), puis suivre toutes les instructions sur votre SysNAND. +{: .notice--primary} + +### Instructions + +1. Éteignez votre console +1. Maintenez le bouton (Select) enfoncé +1. Allumez votre console tout en maintenant le bouton (Select) enfoncé +1. Vous devriez maintenant voir un menu de configuration + +___ + +Si votre console démarre sur le Menu HOME habituel, retournez à [Bien démarrer](get-started) +{: .notice--success} + +Si vous voyez la version 7.0.5 ou toute autre version antérieure de Luma3DS, continuez vers [A9LH vers B9S](a9lh-to-b9s) +{: .notice--primary} + +Si vous voyez la version 7.1 de Luma3DS, continuez vers [Mettre à jour B9S](updating-b9s) +{: .notice--primary} + +Si vous voyez la version 8.0 ou toute autre version ultérieure de Luma3DS, continuez vers [restaurer le CFW](restoring-cfw) +{: .notice--primary} + +Si vous voyez quelque chose qui n'est pas décrit comme dans les options ci-dessus, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez, en anglais, de l'aide. +{: .notice--danger} diff --git a/_pages/fr_FR/credits.txt b/_pages/fr_FR/credits.txt index 65a13e9e9e..4c07e54ad7 100644 --- a/_pages/fr_FR/credits.txt +++ b/_pages/fr_FR/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Un énorme merci à Plailect, le créateur et mainteneur original du guide!** +{: .notice--primary} + **Remerciements spéciaux à toutes les personnes du salon [#Cakey sur Freenode](http://webchat.freenode.net/?channels=%23Cakey), vous êtes géniaux !** {: .notice--primary} @@ -22,7 +25,7 @@ Si je vous ai oublié, contactez-moi et j'ajouterai votre nom. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Si je vous ai oublié, contactez-moi et j'ajouterai votre nom. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Si je vous ai oublié, contactez-moi et j'ajouterai votre nom. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/fr_FR/dsidumper.txt b/_pages/fr_FR/dsidumper.txt index d25e666084..416194ed06 100644 --- a/_pages/fr_FR/dsidumper.txt +++ b/_pages/fr_FR/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table des matières" %} - -### Lecture requise - -Pour dumper les DSiWare système, nous utilisons un exploit existant du homebrew launcher. - -Si pendant que vous suiviez le guide, vous vous êtes aperçus que votre application Connexions Nintendo DS ne fonctionnait pas, suivez [TWLFix pour Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) avant de continuer - -## Ce dont vous avez besoin - -* Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer) -* La dernière version de [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Préparatifs - -1. Éteignez votre 3DS -1. Insérez votre carte SD dans votre ordinateur -1. Copiez votre fichier `movable.sed` à la racine de votre carte SD -1. Copiez `DSiWare_Dump.3dsx` vers le dossier `/3ds/` de votre carte SD -1. Réinsérez votre carte SD dans votre 3DS -1. Allumez à présent votre 3DS - -#### Section II - Dump du DSiWare - -1. Ouvrez le Homebrew Launcher en utilisant n'importe quelle méthode -1. Lancez DSiWare Dumper de la liste des homebrews - + Ceci va dumper une application DSiWare à la racine de votre carte SD - + Il est normal que cela échoue plusieurs fois. -1. Quand "Success" s'affichera, vous aurez le fichier que vous utiliserez pour copier le DSiWare plus tard dans le guide - -Continuez vers [Installation de boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +Cette page a été supprimée car la méthode utilisée est obsolète. Veuillez suivre une méthode plus récente trouvable sur la page [Bien Démarrer](get-started). +{: .notice--warning} diff --git a/_pages/fr_FR/faq.txt b/_pages/fr_FR/faq.txt index 69bb4d0396..9c72191de5 100644 --- a/_pages/fr_FR/faq.txt +++ b/_pages/fr_FR/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **R :** Oui **Q :** *Comment mettre à jour Luma3DS ?* -**A:** Utilisez [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**R :** Copiez les fichiers `boot.firm` et `boot.3dsx` de la [dernière version de Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) vers la racine de la carte SD, en remplaçant tous les fichiers existants. **Q :** *J’ai entendu parler d'une chose payante (Gateway, Sky3DS, etc.). En ai-je besoin ?* **R :** Non. boot9strap est une meilleure méthode pour charger des hax, et s’exécute plus tôt pendant le démarrage. diff --git a/_pages/fr_FR/finalizing-setup.txt b/_pages/fr_FR/finalizing-setup.txt index ffcf400c14..1add0003c8 100644 --- a/_pages/fr_FR/finalizing-setup.txt +++ b/_pages/fr_FR/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalisation de l'installation" Le fichier `boot.firm` est ce qui est lancé par boot9strap lui-même après qu'il ait fini de charger depuis la NAND, et peut être n’importe quel payload arm9 valide dans le format FIRM. Ce fichier peut être remplacé à tout moment, même si Luma3DS permet le lancement d’autres payloads arm9 au format FIRM à l’aide du chainloader Luma3DS . -Dans notre cas, nous utilisons Luma3DS de [AuroraWright](https://github.com/AuroraWright/) pour démarrer directement une SysNAND patchée, nous permettant de contourner complètement la nécessité d'une EmuNAND quelconque, ce qui simplifie grandement l'utilisation d'une 3DS piratée en plus d'économiser de l'espace sur votre carte SD. +Dans notre cas, nous utilisons Luma3DS de [LumaTeam](https://github.com/LumaTeam/) pour démarrer directement une SysNAND patchée, ce qui nous permettra de contourner complètement la nécessité d'une quelconque EmuNAND, cela va grandement simplifier l'utilisation d'une 3DS hackée, en plus d'économiser de l'espace sur votre carte SD. Durant cette étape, nous allons également configurer les programmes suivants : + **FBI** *(Permet d'installer des jeux et applications au format CIA)* + **Anemone3DS** *(Permet d'installer des thèmes personnalisés)* + ** Checkpoint ** *(Sauvegarde et restaure des fichiers de sauvegarde pour les jeux NDS et 3DS) * -+ **Luma3DS Updater** *(Permet de mettre facilement à jour votre CFW)* ++ **Universal-Updater** *(un homebrew app store pour télécharger des homebrew depuis la 3DS via le Wi-Fi)* + **GodMode9** *(Programme multifonction qui peut effectuer des opérations relatives à la NAND et aux cartouches)* + **Homebrew Launcher Loader** *(lance le Homebrew Launcher) * + **DSP1** *(permet aux homebrews d'avoir du son)* @@ -25,12 +25,12 @@ Durant cette étape, nous allons également configurer les programmes suivants : * La dernière version de [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(le fichier`.cia`)* * La dernière version de [Checkpoint] (https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file) * +* La dernière version de [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(le fichier `.cia`)* * La dernière version de [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * La version 1.9.2pre1 de [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* La dernière version de [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* La dernière version de [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(le fichier `.cia`)* * La dernière version de [FBI](https://github.com/Steveice10/FBI/releases/latest) *(le fichier `.cia`et le fichier `.3dsx`)* * La dernière version de [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* La dernière version de [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(le fichier`.cia`)* ### Instructions @@ -39,15 +39,16 @@ Durant cette étape, nous allons également configurer les programmes suivants : 1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur 1. Créez un dossier nommé `3ds` à la racine de votre carte SD si celui ci n'existe pas + + Ce dossier stocke les applications homebrew et leurs données; il est différent du dossier `Nintendo 3DS` que la console génère automatiquement 1. Créez un dossier nommé `cias` à la racine de votre carte SD si celui ci n'existe pas 1. Copiez `ctr-no-timeoffset.3dsx` dans le dossier `/3ds/` de votre carte SD 1. Copiez `FBI.3dsx` dans le dossier `/3ds/` de votre carte SD 1. Copiez `Homebrew_Launcher.cia` vers le répertoire `/cias/` sur votre carte SD -1. Copiez `lumaupdater.cia` vers le dossier`/cias/` sur votre carte SD 1. Copiez `FBI.cia` vers le répertoire `/cias/` sur votre carte SD 1. Copiez `DSP1.cia` vers le répertoire `/cias/` sur votre carte SD 1. Copiez `Anemone3DS.cia` vers le répertoire `/cias/` sur votre carte SD 1. Copiez `Checkpoint.cia` dans le dossier `/cias/` sur votre carte SD +1. Copiez `Universal-Updater.cia` vers le dossier`/cias/` sur votre carte SD 1. Créez un dossier nommé `payloads` dans le dossier `luma` sur votre carte SD, si il n’existe pas déjà 1. Copiez le fichier `GodMode9.firm` de l'archive `.zip` de GodMode9 dans le dossier `/luma/payloads/` sur votre carte SD 1. Copiez le dossier `gm9` de GodMode9 `.zip` à la racine de votre carte SD @@ -102,7 +103,7 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou #### Section VI - CTRNAND Luma3DS 1. Éteignez votre 3DS -1. Ouvrez Godmode9 en maintenant (Start) au démarrage +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois terminé 1. Si vous êtes invité à régler la date et l'heure du RTC, appuyez sur (A) pour le faire, puis réglez la date et l'heure, puis appuyez sur (A) pour continuer 1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu) @@ -150,18 +151,8 @@ ___ #### Informations et notes -{% capture notice-10 %} -Vous pouvez à présent ouvrir Luma3DS Updater et appuyer sur (A) pour mettre à jour Luma3DS dans sa dernière version. - -Cela est différent d'une mise à jour du système ; le programme se contente de télécharger et extraire les fichiers de la dernière version de Luma3DS. - -Ceci mettra à jour les fichiers de Luma3DS sur votre carte SD et dans la CTRNAND, qui est ce sur quoi la console démarre lorsqu'il n'y a aucune carte SD insérée. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Votre console démarrera désormais Luma3DS CFW SysNAND (c'est-à-dire sur votre SysNAND avec le CFW Luma3DS) par défaut. +Votre console démarrera désormais Luma3DS CFW par défaut. Vous pouvez maintenir (Select) lors du démarrage pour entrer dans le menu de configuration de Luma3DS. @@ -177,7 +168,7 @@ Vous pouvez maintenant appuyer simultanément sur (L) + (Bas) + (Select) pour d {% capture notice-6 %} Si vous voulez changer votre carte SD pour une plus grande capacité, il vous suffit de formater la nouvelle carte SD en FAT32 puis de copier-coller tout le contenu de l'ancienne SD vers la nouvelle. -Si votre nouvelle carte SD fait plus de 32 Go, vous devrez utiliser un outil spécifique pour la formater, comme [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) pour Windows, [gparted](http://gparted.org/download.php) pour Linux, ou [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) pour Mac. +Si votre nouvelle carte SD fait plus de 32 Go, alors vous devez utiliser un outil différent pour la formater comme [guiformat (Windows)](formatting-sd-(windows)), [Utilitaire de disque (Mac)](formatting-sd-(mac)), ou [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Pour plus d’informations sur l’utilisation des diverses fonctionnalités de Pour plus d'informations concernant les diverses fonctionnalités de Luma3DS, veuillez consulter [le wiki dédié](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -Pour plus d'informations sur l'installation des thèmes personnalisés et des splash screens (image au démarrage de la console), consultez [Theme Plaza](https://themeplaza.eu/). +Pour plus d'informations sur l'installation des thèmes personnalisés et des splash screens (image au démarrage de la console), consultez [Theme Plaza](https://themeplaza.art/). {: .notice--success} Pour plus d'informations concernant l'utilisation de codes de triche Gateshark sur Luma3DS, consultez [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt index 6813bcd12a..cdd257dab9 100644 --- a/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Notez que dans de rares circonstances, il est possible que pendant le processus * Deux dispositifs de la famille 3DS + **La 3DS source** : La 3DS qui tourne déjà sous boot9strap + **La 3DS cible** : la 3DS sur un firmware original non modifié -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` standard, pas le fichier `devkit`)* +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; pas le fichier devkit)* * La dernière version de [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt b/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt index 094f83e5e0..083c745c35 100644 --- a/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Notez que dans de rares circonstances, il est possible que pendant le processus ## Ce dont vous avez besoin * Votre linker compatible ntrboot -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` standard, pas le fichier `devkit`)* +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; pas le fichier devkit)* * La dernière version de [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/fr_FR/flashing-ntrboot-(nds).txt b/_pages/fr_FR/flashing-ntrboot-(nds).txt index 58510ff78c..ef65a7c6da 100644 --- a/_pages/fr_FR/flashing-ntrboot-(nds).txt +++ b/_pages/fr_FR/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne **i * Deux Consoles + **La NDS / NDSL source** : la Nintendo DS ou Nintendo DS Lite qui est compatible avec votre cartouche + **La 3DS cible** : la 3DS sur un firmware original non modifié -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` standard, pas le fichier `devkit`)* +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; pas le fichier `devkit`)* * La dernière version de [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/fr_FR/formatting-sd-(linux).txt b/_pages/fr_FR/formatting-sd-(linux).txt new file mode 100644 index 0000000000..b2ac0fe433 --- /dev/null +++ b/_pages/fr_FR/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatage de la carte SD (Linux)" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +Il s'agit d'une section supplémentaire pour le formatage d'une carte SD afin que celle-ci fonctionne avec la 3DS. + +Si la 3DS reconnaît déjà la carte SD, il n'est pas nécessaire de suivre ce guide. + +Cette page est uniquement destinée aux utilisateurs de Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Déterminer dans quel emplacement se trouve votre carte SD + +1. Assurez-vous que votre carte SD n'est **pas** insérée +1. Lancez le terminal Linux +1. Tapez `watch "lsblk"` +1. Insérez votre carte SD dans votre PC +1. Lisez le résultat. Cela devrait ressembler à quelque chose comme ça : +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Prenez note du point de montage de l'appareil. Dans notre exemple ci-dessus, c'était `mmcblk0` + + Si `RO` est défini sur 1, assurez-vous que le bouton de verrouillage ne soit pas glissé vers le bas +1. Appuyez sur CTRL + C pour quitter le menu + +#### Section II - Formatage de la carte SD + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Tapez `sudo cfdisk /dev/(point de montage de l'appareil)` +1. Sur chaque partition, appuyez sur `Delete` +1. Créez un nouvelle partition primaire occupant la totalité de votre carte SD + + Ceci va créer une nouvelle partition avec le système de fichiers Linux +1. Sélectionnez le type et jetez un coup d'œil au menu +1. Trouvez "W95 FAT32" et prenez note du code sur le côté gauche de ce texte +1. Appuyez sur n'importe quelle touche, puis entrez le code que vous avez noté à l'étape précédente +1. Appuyez sur Entrer, puis sur Quitter diff --git a/_pages/fr_FR/formatting-sd-(mac).txt b/_pages/fr_FR/formatting-sd-(mac).txt new file mode 100644 index 0000000000..5d34311c19 --- /dev/null +++ b/_pages/fr_FR/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatage de la Carte SD (Mac)" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +Il s'agit d'une section supplémentaire pour le formatage d'une carte SD afin que celle-ci fonctionne avec la 3DS. + +Si la 3DS reconnaît déjà la carte SD, il n'est pas nécessaire de suivre ce guide. + +Cette page est pour les utilisateurs de Mac uniquement. Si vous n'êtes pas sur Mac, consultez les pages [Formatage de la carte SD (Windows)](formatting-sd-(windows)) ou [Formatage de la carte SD (Linux)](formatting-sd-(linux)) . + +### Instructions + +#### OS X El Capitan (10.11) et versions ultérieures + +1. Insérez votre carte SD dans votre ordinateur +1. Si la carte SD contient des fichiers et des dossiers, copiez tout dans un dossier sur votre ordinateur +1. Exécutez l'application Utilitaire de disque +1. Dans le menu "Présentation" en haut à gauche, choisissez "Afficher tous les appareils" +1. Sélectionnez votre carte SD dans le panneau de gauche + + Assurez-vous de choisir le bon périphérique, sinon vous risquez d'effacer accidentellement le mauvais lecteur ! + {: .notice--danger} + +1. Cliquez sur "Effacer" en haut +1. Entrez ce que vous voulez dans "Nom" +1. Assurez-vous que le "Format" de votre Carte SD soit défini sur "MS-DOS (FAT)" +1. Assurez-vous que "Schéma" soit réglé sur "Enregistrement de démarrage principal (MBR)" + + Si "Schéma" n'apparaît pas, cliquez sur "Annuler" et assurez-vous d'avoir choisi l'appareil au lieu d'un volume +1. Cliquez sur "Effacer" +1. Attendez que le formatage soit terminé +1. Cliquez ensuite sur "OK" +1. Si la carte SD contenait des fichiers et des dossiers avant le formatage, recopiez les dessus depuis votre ordinateur + +#### OS X Yosemite (10.10) et versions antérieures + +1. Insérez votre carte SD dans votre ordinateur +1. Si la carte SD contient des fichiers et des dossiers, copiez tout dans un dossier sur votre ordinateur +1. Exécutez l'application Utilitaire de disque +1. Sélectionnez votre carte SD dans le panneau de gauche + + Assurez-vous de choisir le bon périphérique, sinon vous risquez d'effacer accidentellement le mauvais lecteur ! + {: .notice--danger} + +1. Cliquez sur "Partition" en haut + + Si "Partition" n'apparaît pas, assurez-vous d'avoir choisi l'appareil au lieu d'un volume +1. Assurez-vous que "Schéma de partition" soit réglé sur "1 partition" +1. Entrez ce que vous voulez dans "Nom" +1. Assurez-vous que le "Format" de votre Carte SD soit défini sur "MS-DOS (FAT)" +1. Cliquez sur "Options" en dessous du schéma de partition +1. Choisissez "Enregistrement de démarrage principal (MBR)" +1. Cliquez sur "OK" +1. Cliquez sur "Appliquer" +1. Cliquez sur "Partitionner" +1. Attendez que le formatage soit terminé +1. Fermez l'Utilitaire de disque +1. Si la carte SD contenait des fichiers et des dossiers avant le formatage, recopiez les dessus depuis votre ordinateur diff --git a/_pages/fr_FR/formatting-sd-(windows).txt b/_pages/fr_FR/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fdb14bb9ed --- /dev/null +++ b/_pages/fr_FR/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatage de la carte SD (Windows)" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +Il s'agit d'une section supplémentaire pour le formatage d'une carte SD afin que celle-ci fonctionne avec la 3DS. + +Si la 3DS reconnaît déjà la carte SD, il n'est pas nécessaire de suivre ce guide. + +Cette page est pour les utilisateurs de Windows uniquement. Si vous n'êtes pas sous Windows, consultez les pages [Formatage de la carte SD (Linux)](formatting-sd-(linux)) ou [Formatage de la carte SD (Mac)](formatting-sd-(mac)) . + +## Ce dont vous avez besoin + +* La dernière version de [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insérez votre carte SD dans votre ordinateur +1. Si la carte SD contient des fichiers et des dossiers, copiez tout dans un dossier sur votre ordinateur +1. Exécutez `guiformat.exe` +1. Sélectionnez la lettre de lecteur de votre carte SD pour "Drive" + + Assurez-vous de choisir la bonne lettre de lecteur, sinon vous risqueriez d'effacer accidentellement le mauvais lecteur ! + {: .notice--danger} + +1. Sélectionnez une taille pour "Allocation unit size" + + Si la carte SD fait 64 Go ou moins, choisissez 32768 + * Si la carte SD est supérieure à 64 Go, choisissez 65536 +1. Entrez ce que vous voulez pour "Volume label" +1. Assurez-vous que la case "Quick Format" est sélectionnée +1. Cliquez sur "Start" +1. Cliquez sur "OK" +1. Attendez que le formatage soit terminé +1. Cliquez ensuite sur "Close" +1. Si la carte SD contenait des fichiers et des dossiers avant le formatage, recopiez les dessus depuis votre ordinateur + +### Erreurs courantes + +* Failed to open device: GetLastError()=32 + + Fermez tout ce qui peut être utilisé par la carte SD, comme par exemple, n'importe quelle fenêtre ouverte de l'Explorateur de fichiers. diff --git a/_pages/fr_FR/get-started-(new-3ds).txt b/_pages/fr_FR/get-started-(new-3ds).txt index 99d2ca1abf..fd17bc0955 100644 --- a/_pages/fr_FR/get-started-(new-3ds).txt +++ b/_pages/fr_FR/get-started-(new-3ds).txt @@ -2,67 +2,53 @@ title: "Bien Démarrer (New 3DS)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise -Sélectionnez la page appropriée pour votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclue 9.0.0, 9.1.0 et 9.2.0. - -Notez que les derniers chiffres de votre version système (qui sont précédés par un slash) réfèrent à votre version de navigateur. Actuellement, la version du navigateur n'a aucun rapport avec la New 3DS dans ce guide. - -**Si vous ne pouvez pas suivre les instructions correspondant à votre version spécifique en raison de conditions préalables manquantes, vous devriez voir la ligne "Toutes les versions" pour les méthodes qui fonctionnent indépendamment de la version du système.** - -Pour toutes les versions, vous pouvez également faire une [Mise à jour par Cartouche](cart-update) (ou faire une mise à jour standard du système) vers une version ultérieure de la même colonne pour suivre les instructions correspondant à cette nouvelle version. +Sélectionnez la page appropriée à votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. La version de votre console peut être trouvée en bas à droite de l'écran supérieur de la 3DS - dans les Paramètres Systèmes de la console. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +Bien que nous pensons que le custom firmware est sûr pour un utilisation en ligne, des cas de bannissements ont été rapportés dans le passé, principalement à cause de tricherie en ligne ou d'un comportement suspect de l'eShop. +{: .notice--warning} + ### Tableau des versions - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
DeÀDeÀAction
2.1.02.1.0Installation de boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installation de boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Utilisez une méthode "Toutes les versions"11.13.0Installation de boot9strap (SSLoth-Browser)
11.8.011.8.0Installation de boot9strap (DSiWare)11.14.0 (dernière version)Installation de boot9strap (Navigateur Web)
TOUTES LES VERSIONS

ntrboot
(Requise un Linker Compatible)

ou

Installer boot9strap (Hardmod)
(Requise de la soudure)

ntrboot
(Nécessite un Linker Compatible)

ou

Installer boot9strap (Hardmod)
(Nécessite d'effectuer de la soudure)
diff --git a/_pages/fr_FR/get-started-(old-3ds).txt b/_pages/fr_FR/get-started-(old-3ds).txt index 55c469800d..eb47dba556 100644 --- a/_pages/fr_FR/get-started-(old-3ds).txt +++ b/_pages/fr_FR/get-started-(old-3ds).txt @@ -2,25 +2,20 @@ title: "Bien Démarrer (Old 3DS)" --- -{% include toc title="Table of Contents" %} +{% include toc title="Table des matières" %} ### Lecture requise -Sélectionnez la page appropriée à votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclut 9.0.0, 9.1.0 et 9.2.0. - -Les 2 dernières colonnes du tableau correspondent au dernier nombre de votre numéro de version (qui correspond à la version du navigateur de votre console). Si votre version est -0, vous n'avez pas de navigateur internet installé, une version supérieure à -0 indique qu'un navigateur est installé. - -Dans le cas de "5.0.0-0U" par exemple, vous devez suivre la colonne "Sans navigateur" et la ligne "De 5.0.0 à 5.1.0" car le système est dans une version qui est dans cet intervalle et n'a pas de navigateur installé. - -**Si vous ne pouvez pas suivre les instructions correspondant à votre version spécifique en raison de conditions préalables manquantes, vous devriez voir la ligne "Toutes les versions" pour les méthodes qui fonctionnent indépendamment de la version du système.** - -Pour toutes les versions, vous pouvez également faire une [Mise à jour par Cartouche](cart-update) (ou faire une mise à jour standard du système) vers une version ultérieure de la même colonne pour suivre les instructions correspondant à cette nouvelle version. +Sélectionnez la page appropriée à votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. La version de votre console peut être trouvée en bas à droite de l'écran supérieur de la 3DS - dans les Paramètres Systèmes de la console. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +Bien que nous pensons que le custom firmware est sûr pour un utilisation en ligne, des cas de bannissements ont été rapportés dans le passé, principalement à cause de tricherie en ligne ou d'un comportement suspect de l'eShop. +{: .notice--warning} + ### Tableau des versions @@ -33,49 +28,23 @@ La version de votre console peut être trouvée en bas à droite de l'écran sup - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
De ÀSans NavigateurNavigateurAction
1.0.02.0.0Utilisez une méthode "Toutes les versions"
2.1.02.1.0Utilisez une méthode "Toutes les versions"Installation de boot9strap (2xrsa)
2.2.02.2.0Utilisez une méthode "Toutes les versions"
3.0.08.1.0Installation de boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Utilisez une méthode "Toutes les versions"Installation de boot9strap (Soundhax)
11.8.011.8.0Installation de boot9strap (DSiWare)
11.4.011.14.0Installation de boot9strap (safecerthax)
TOUTES LES VERSIONS

ntrboot
(Requise un Linker Compatible)

ou

Installer boot9strap (Hardmod)
(Requise de la soudure)

ntrboot
(Nécessite un Linker Compatible)

ou

Installer boot9strap (Hardmod)
(Nécessite d'effectuer de la soudure)
\ No newline at end of file + diff --git a/_pages/fr_FR/get-started.txt b/_pages/fr_FR/get-started.txt index 2c94b5f99a..e0deb838ab 100644 --- a/_pages/fr_FR/get-started.txt +++ b/_pages/fr_FR/get-started.txt @@ -6,85 +6,16 @@ title: "Bien Démarrer" ### Lecture requise -Sélectionnez la page appropriée à votre version dans le tableau ci-dessous. Notez que les champs "De" et "À" sont inclusifs. Cela signifie - par exemple - que la ligne "De 9.0.0 à 9.2.0" inclut 9.0.0, 9.1.0 et 9.2.0. - -La version de votre console peut être trouvée en bas à droite de l'écran supérieur de la 3DS - dans les Paramètres Systèmes de la console. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**Si vous ne pouvez pas suivre les instructions correspondant à votre version spécifique en raison de conditions préalables manquantes, vous devriez soit mettre à jour vers la dernière version soit regarder la ligne "Toutes les versions" pour les méthodes qui fonctionnent indépendamment de la version du système.** - -Pour toutes les versions, vous pouvez également faire une [Mise à jour par Cartouche](cart-update) (ou faire une mise à jour standard du système) vers une version ultérieure de la même colonne pour suivre les instructions correspondant à cette nouvelle version. - -Si vous avez déjà hacké votre 3DS dans le passé et avez un CFW basé sur une EmuNAND, suivez simplement toutes les instructions depuis votre SysNAND. Remplacez tout fichier déjà existant. Vos données vont être transférées de l'EmuNAND à votre installation de B9S à la fin. Si vous utilisez menuhax, vous devez [nettoyer les extdata du Menu Home](troubleshooting#effacer-lextdata-du-menu-home) pour le supprimer avant de commencer. - -Cette page donne des instructions sur comment installer boot9strap sur une 3DS ou 2DS vierge. Si vous avez déjà installé arm9loaderhax et que vous voulez passer à boot9strap, suivez [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Avant de commencer, les utilisateurs de Windows devraient permettre d'afficher les extensions de fichiers suivant ce guide [Extensions de fichiers (Windows)](file-extensions-(windows))! -{: .notice--info} - -Avant de commencer, assurez vous que votre carte SD n'a pas d'erreurs en utilisant [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), ou [F3X (Mac)](f3x-(mac))! +Si vous avez hacké votre 3DS par le passé, ou si vous avez acheté votre 3DS d'occasion, il est possible que votre console dispose déjà d'un custom firmware. Vous devriez [vérifier la présence d'un CFW](checking-for-cfw) avant de continuer. {: .notice--warning} -{% capture notice-1 %} -Bien que nous croyons que le custom firmware est relativement sûr en ce moment, il est important de noter qu'il existera toujours un risque de se faire bannir. +Des consoles de modèles, de versions et/ou de régions différentes requièrent des étapes différentes pour atteindre l'objectif final d'un Custom Firmware basé sur boot9strap. Cette page vous aidera à trouver par où commencer en fonction de votre console. -Vous devriez éviter les actions suivantes : -1. Le piratage -1. La triche en ligne -1. Comportement douteux sur l'eShop (par exemple, les oppositions sur carte bancaire après un achat sur l'eShop) +Les couleurs des consoles dans l'image peuvent varier, mais notez le positionnement des boutons et les fonctionnalités de chaque console pour vous assurer que vous choisissez la bonne. -Nous pensons aussi que SpotPass et StreetPass sont utilisables sans risque pour le moment. -{% endcapture %} +Cliquez sur l'image qui correspond à votre console pour vous rendre à la page appropriée. -
{{ notice-1 | markdownify }}
- -### Tableau des versions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DeÀAction
1.0.02.0.0Mettez à jour vers la version la plus récente du logiciel système ou utilisez une méthode "TOUTES LES VERSIONS"
2.1.08.1.0Installation de boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Mettez à jour vers la version la plus récente du logiciel système ou utilisez une méthode "TOUTES LES VERSIONS"
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
TOUTES LES VERSIONS

ntrboot
(Nécessite un Linker Compatible)

ou

Installer boot9strap (Hardmod)
(Nécessite d'effectuer de la soudure)

+| New 3DS ou New 2DS | Old 3DS ou Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/fr_FR/godmode9-usage.txt b/_pages/fr_FR/godmode9-usage.txt index 5221be5c3f..78cf74d4d6 100644 --- a/_pages/fr_FR/godmode9-usage.txt +++ b/_pages/fr_FR/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "Utilisation de GodMode9" {% include toc title="Table des matières" %} -Pour de l'aide (en anglais) sur GodMode9 ainsi que sur le scripting, et pour être tenu à jour et informé, rejoignez le [Discord GodMode9](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Lecture requise diff --git a/_pages/fr_FR/home.txt b/_pages/fr_FR/home.txt index 4a71382900..c5566efa35 100644 --- a/_pages/fr_FR/home.txt +++ b/_pages/fr_FR/home.txt @@ -64,7 +64,7 @@ Pour une liste de chacune des signatures sighax calculées, voir [ce gist](https ## Que puis-je faire avec un Custom Firmware ? + Jouer à toutes les cartouches de jeux et tous les jeux eShop peu importe leur région -Personnalisez votre Menu Home avec des [thèmes et écrans d'accueil créés par les utilisateurs](https://themeplaza.eu/) +Personnalisez votre Menu HOME avec des [thèmes et écrans d'accueil](https://themeplaza.art/) créés par la communauté + Utiliser des "ROM hacks" pour les jeux que vous possédez + Prendre des captures d'écran des jeux et des applications + Sauvegarder, modifier, et restaurer les sauvegardes de plusieurs jeux @@ -79,11 +79,11 @@ Personnalisez votre Menu Home avec des [thèmes et écrans d'accueil créés par + **Avant de commencer à suivre ce guide, vous devez connaître les risques liés au hack de votre 3DS: à chaque fois que vous modifiez votre système, il y a toujours un risque de brick IRRÉCUPÉRABLE. Cela arrive rarement, mais c'est toujours une possibilité donc assurez-vous de suivre EXACTEMENT TOUTES les directives.** + Si vous avez déjà hacké votre 3DS dans le passé pour obtenir une EmuNAND, et désirez déplacer le contenu de votre ancienne EmuNAND vers votre nouveau SysNAND CFW, vous devez suivre toutes les instructions et restaurer votre EmuNAND existante quand on vous le demande à l'étape [Finalisation de l'installation](finalizing-setup). -+ Ce guide fonctionnera sur les New 3DS, Old 3DS, New 2DS et Old 2DS de toutes les régions en version 11.13.0 ou inférieure. ++ Ce guide fonctionnera sur New 3DS, Old 3DS, New 2DS, New 2DS, et Old 2DS dans toutes les régions et toutes les versions, y compris la dernière version (11.14.0). + Si tout se passe comme prévu, vous ne perdrez aucune donnée et finirez avec tout ce que vous aviez au départ (les jeux, votre NNID, les sauvegardes, etc., seront préservées). + Assurez-vous que votre console reste branchée et chargée pendant l'intégralité du processus pour éviter la perte de données ou les dommages causés par une extinction inattendue! + Votre carte SD doit être en [MBR, pas GPT](http://www.howtogeek.com/245610/) (la carte SD fournie avec la console est en MBR par défaut). La façon la plus simple de vérifier que la carte SD est bien en MBR est de s'assurer que la carte SD fonctionne dans votre 3DS. Si elle fonctionne, votre carte SD est en MBR. -+ Si vous devez formater une carte SD neuve, vous pouvez utiliser [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) et choisir une taille d'unité d'allocation ("Allocation Unit Size") de 32K (32768). ++ Si vous avez besoin de formater une nouvelle carte SD, vous pouvez la formater en FAT32 en utilisant [guiformat (Windows)](formatting-sd-(windows)), l'[Utilitaire de disque (Mac)](formatting-sd-(mac)), ou [cfdisk (Linux)](formatting-sd-(linux)). + La Old 2DS est essentiellement identique à la Old 3DS pour ce qui est du logiciel, tandis que la New 2DS est essentiellement identique à la New 3DS pour ce qui est du logiciel. Toute étape mentionnant "Old 3DS" s'applique également à la Old 2DS, et toute étape mentionnant "New 3DS" s'applique également à la New 2DS. ___ diff --git a/_pages/fr_FR/homebrew-launcher-(browserhax-2020).txt b/_pages/fr_FR/homebrew-launcher-(browserhax-2020).txt index 7df2154ac7..d24544d313 100644 --- a/_pages/fr_FR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/fr_FR/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table des matières" %} - -### Lecture requise - -Cette méthode d'accès au Homebrew Launcher se sert de failles dans le Navigateur Internet 3DS natif. - -### Tests de compatibilité - -Pour pouvoir utiliser cette méthode, votre console doit provenir d'une région compatible avec une version compatible du navigateur. - -Vous pouvez vérifier ces informations dans les Paramètres de la console. - -1. Ouvrez les Paramètres de la console. -1. Vous pouvez voir la version du firmware sous la forme de `11.13.0-45x` dans le coin inférieur droit de l'écran supérieur. - + Le 45 représente la version du navigateur et la lettre représente la région - + Si la version du Navigateur Internet est inférieure à 45, vous devez mettre à jour la console depuis l'option "Mise à jour de la console" des Paramètres de la Console - + E représente EUROPE - + U représente USA - + J représente JAPON - + Si votre console ne possède aucune de ces 3 lettres, elle n'est pas compatible avec cette méthode. -1. Souvenez vous de votre région. Vous en aurez besoin pour plus tard. - -## Ce dont vous avez besoin - -* La dernière version de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La dernière version de BrowserHax [[pour Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [pour New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old représente le modèle de votre console. Si vous n'êtes pas sûr du modèle que vous possédez, référez vous à [cette image](https://3ds.eiphax.tech/pic/newold.png) -* Une connexion Wi-Fi fonctionnelle sur votre console - -### Instructions - -#### Section I - Préparatifs - -1. Éteignez votre console et retirez la carte SD -1. Insérez la carte SD dans votre ordinateur -1. Copiez `boot.3dsx` depuis la release du Homebrew Launcher à la racine de la carte SD - + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier -1. Dans l'archive de BrowserHax, ouvrez le dossier correspondant à la région de votre console -1. Copiez le dossier `3ds`, `browserhax_hblauncher_ropbin_payload.bin` et `arm11code.bin` vers la racine de votre carte SD - + Vous devriez maintenant avoir un dossier `Nintendo 3DS`, un dossier `3ds` et les deux fichiers `.bin` sur la racine de votre carte SD - -#### Section II - BrowserHax - -1. Ouvrez [cette image](https://3ds.eiphax.tech/pic/hax.png) dans un nouvel onglet ou fenêtre sur votre ordinateur -1. Éjectez en toute sécurité votre carte SD de votre ordinateur et remettez-la dans votre console -1. Allumez votre console et assurez-vous qu'elle est connectée à un réseau Wi-Fi fonctionnel -1. Sur le menu HOME, appuyez sur la gâchette gauche (L) et la gâchette droite (R) en même temps - + Cela devrait ouvrir le lecteur de QR code. Si ce n'est pas le cas, USM (la partie suivante de l'installation du custom firmware) ne fonctionnera pas. Vous devrez alors utiliser une [ancienne méthode](legacy-methods) - + Si vous avez besoin de saisir l'URL, la voici `https://zoogie.github.io/web/nbhax/` -1. Utilisez le lecteur de QR code pour scanner le QR code ouvert précédemment à la première étape -1. Appuyez sur le bouton "PROCEED TO HAXX" -1. Attendez la fin de l'opération - + Si vous obtenez un écran jaune, éteignez votre console et réessayez cette section encore une fois -1. Si l'exploit a réussi, votre console devrait avoir démarré l'Homebrew Launcher - + Il est possible que vous obteniez une erreur indiquant qu'aucune application n'a été trouvée. Si cela se produit, passez aux étapes suivantes -1. Laissez votre console allumée et passez à la section suivante ci-dessous - - -___ - -### Continuer vers [Installation de boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +Cette page a été supprimée car la méthode utilisée est obsolète. Veuillez suivre une méthode plus récente trouvable sur la page [Bien Démarrer](get-started). +{: .notice--warning} diff --git a/_pages/fr_FR/homebrew-launcher-(pichaxx).txt b/_pages/fr_FR/homebrew-launcher-(pichaxx).txt index 772ecd5f77..7ae4f3676b 100644 --- a/_pages/fr_FR/homebrew-launcher-(pichaxx).txt +++ b/_pages/fr_FR/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table des matières" %} +Les méthodes basées sur Seedminer ont été remplacées par des méthodes plus simples et plus sûres. Veuillez retourner à [Bien Démarrer](get-started) à moins que vous n'ayez une raison légitime de suivre cette page (si vos boutons L et R sont cassés). +{: .notice--warning} + ### Lecture requise Cette méthode d'utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier `movable.sed` pour accéder à l'Homebrew Launcher en utilisant l'exploit PicHaxx pour injecter un titre DSiWare exploitable dans l'application Mode Téléchargement. Cette méthode requiert que vous possédiez (ou téléchargiez) le jeu gratuit "Pokémon Picross" depuis l'eShop. -Si votre console a déjà accès à l'Homebrew Launcher (que ce soit via PicHaxx ou un autre exploit), vous pouvez passer à [DSiWare Dumper](dsidumper)). +Si votre appareil a déjà accès à l'Homebrew Launcher (que ce soit via PicHaxx ou un autre exploit), vous pouvez passer à [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} Si vous avez déjà Pokémon Picross, ce processus écrasera le fichier de sauvegarde de votre jeu ! @@ -19,7 +22,8 @@ Si vous avez déjà Pokémon Picross, ce processus écrasera le fichier de sauve * Le jeu eShop gratuit "Pokémon Picross" * Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer) * La dernière version de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* Le [payload otherapp](https://deadphoenix8091.github.io/3ds/#otherapp) *(en fonction de votre région et de votre version)* +* Le [payload otherapp] (https://deadphoenix8091.github.io/3ds/#otherapp) *(pour votre région, appareil et version)* + + Si votre version actuelle est 11.14.0-46, sélectionnez 11.13.0-45 pour votre version ### Instructions @@ -27,26 +31,26 @@ Si vous avez déjà Pokémon Picross, ce processus écrasera le fichier de sauve 1. Copiez `boot.3dsx` à la racine de votre carte SD 1. Copiez le payload otherapp vers la racine de votre carte SD et renommez-le `otherapp.bin` - + si vous ne voyez pas l'extension `.bin`, ne l'ajoutez pas à la fin du nom du fichier + + Si vous ne voyez pas l'extension `.bin`, ne l'ajoutez pas à la fin du nom de fichier 1. Créez un dossier nommé `3ds` à la racine de votre carte SD si celui ci n'existe pas #### Section II - PicHaxx -1. Ouvrez le [site web de PicHaxx Injector](https://seedminer.hacks.guide/pichaxx/) sur votre ordinateur +1. Ouvrez [le site Web de PicHaxx Injector](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) sur votre ordinateur 1. Sélectionnez votre fichier `movable.sed` 1. Sélectionnez "Build and Download" 1. Attendez la fin de l'opération -1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` sur votre carte SD - + Cet `` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) - + Ce dossier `` sera un autre dossier de 32 lettres/numéros dans le dossier `` -1. Copiez le nouveau fichier `00000001.sav` téléchargé vers le dossier `data` sur votre carte SD +1. Accédez à `Nintendo 3DS` ->``->``->`title` -> `00040000` ->` 0017c100` -> `data` sur votre carte SD + + L'`` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) + + Le `` est un dossier de 32 caractères à l'intérieur du `` +1. Copiez le fichier fraîchement téléchargé `00000001.sav` vers le dossier `data` sur votre carte SD + Remplacez l'ancien fichier de sauvegarde lorsque cela vous sera demandé 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez à présent votre 3DS 1. Lancez "Pokémon Picross" 1. Si l'exploit a réussi, votre console devrait avoir démarré l'Homebrew Launcher - + Vous pouvez voir une erreur indiquant qu'il n'y a pas d'applications trouvées. -1. Éteignez votre console. + + Il est possible que vous obteniez une erreur indiquant qu'aucune application n'a été trouvée +1. Éteignez votre 3DS ___ diff --git a/_pages/fr_FR/homebrew-launcher-(soundhax).txt b/_pages/fr_FR/homebrew-launcher-(soundhax).txt index cc312fa319..5804b40932 100644 --- a/_pages/fr_FR/homebrew-launcher-(soundhax).txt +++ b/_pages/fr_FR/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Assurez vous que la communication sans fil de votre appareil est allumée, vu qu Les mises à jour par cartouche vont mettre uniquement à jour les fonctionnalités principales telles que les Paramètres Systèmes, le Menu Home, etc. les mises à jour par cartouche ne vont pas mettre à jour le Studio Son Nintendo 3DS et les fonctionnalités Internet comme le Transfert Système, le Navigateur Internet, la Place Mii Streetpass ou le Nintendo eShop. -Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une version contenant une ancienne version du Studio Son 3DS *(< 3.0.0)* à une autre qui a introduit une version plus récente du Studio Son 3DS cassera Soundhax ! Vous aurez besoin d'une [méthode alternative](homebrew-launcher-(alternatives)) pour entrer dans l'Homebrew Launcher ! +Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une version contenant une ancienne version du Studio Son Nintendo 3DS *(< 2.1.0)* à une autre qui a introduit une version plus récente du Studio Son Nintendo 3DS cassera Soundhax ! Vous aurez besoin d'une [méthode alternative](homebrew-launcher-(alternatives)) pour entrer dans l'Homebrew Launcher ! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une ## Ce dont vous avez besoin * La dernière version de [Soundhax](http://soundhax.com) *(en fonction de votre console, de son modèle, et de sa région)* + + Si Soundhax apparaît dans votre navigateur comme une vidéo illisible, appuyez sur Ctrl + S ou Cmd + S pour l'enregistrer sur votre ordinateur * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, ni le fichier `devkit`, ni le fichier `ntr`)* +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* * La dernière version de [safehax](https://github.com/TiniVi/safehax/releases/latest) *(le fichier`.3dsx`)* * La dernière version de [udsploit](https://github.com/smealum/udsploit/releases/latest) -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Le [payload otherapp](https://smealum.github.io/3ds/#otherapp) *(en fonction de votre région et de votre version)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) +* Le [payload otherapp](https://smealum.github.io/3ds/#otherapp) *(pour votre région, appareil et version)* ### Instructions diff --git a/_pages/fr_FR/homebrew-launcher-(steelhax).txt b/_pages/fr_FR/homebrew-launcher-(steelhax).txt index 52f382d4d7..aab8ae0237 100644 --- a/_pages/fr_FR/homebrew-launcher-(steelhax).txt +++ b/_pages/fr_FR/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table des matières" %} - -### Lecture requise - -Cette méthode d'utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier `movable.sed` pour accéder à l'Homebrew Launcher en utilisant l'exploit Steelhax pour injecter un titre DSiWare exploitable dans l'application Mode téléchargement. Cette méthode requiert que vous possédiez (ou téléchargiez) le jeu gratuit "Steel Diver: Sub Wars" depuis l'eShop. - -Si votre console a déjà accès à l'Homebrew Launcher (que ce soit via Steelhax ou un autre exploit), vous pouvez passer à [DSiWare Dumper](dsidumper)). -{: .notice--success} - -Si vous avez déjà Steel Diver: Sub Wars, ce processus écrasera votre fichier de sauvegarde du jeu ! +Cette page a été supprimée car la méthode utilisée est obsolète. Veuillez suivre une méthode plus récente trouvable sur la page [Bien Démarrer](get-started). {: .notice--warning} - -## Ce dont vous avez besoin - -* Le jeu eShop gratuit "Steel Diver: Sub Wars" depuis l'eShop -* Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer) -* La dernière version de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La dernière version de [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* Le [payload otherapp](https://deadphoenix8091.github.io/3ds/#otherapp) *(en fonction de votre région et de votre version)* - -### Instructions - -#### Section I - Préparatifs - -1. Créez un dossier nommé `3ds` à la racine de votre carte SD si celui ci n'existe pas -1. Copiez `boot.3dsx` à la racine de votre carte SD -1. Copiez le dossier `steelhax` qui se trouve dans `Steelhax-release.zip` à la racine de votre carte SD -1. Copiez le payload otherapp vers le dossier `steelhax` sur votre carte SD et renommez-le `payload.bin` - -#### Section II - Steelminer - -1. Insérez votre carte SD dans votre 3DS -1. Lancez "Steel Diver: Sub Wars" une fois et sélectionnez un Mii afin d'initialiser votre fichier de sauvegarde - + Refusez la mise à jour du jeu lorsque cela vous sera demandé - + Si vous avez déjà mis à jour le jeu, utilisez le menu Gestion des données des Paramètres de la console afin de supprimer la mise à jour -1. Quittez "Steel Diver: Sub Wars" -1. Éteignez votre 3DS -1. Insérez votre carte SD dans votre ordinateur -1. Ouvrez le [site web de Steelminer Injector](https://seedminer.hacks.guide/steelhax/) sur votre ordinateur -1. Sélectionnez votre fichier `movable.sed` -1. Sélectionnez "Start!" -1. Attendez la fin de l'opération -1. Naviguez vers `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` sur votre carte SD - + **Région EUR** : `000d7e00` - + **Région JPN** : `000d7c00` - + **Région USA** : `000d7d00` -1. Copiez le nouveau fichier de sauvegarde téléchargé vers le dossier `data` sur votre carte SD - + Remplacez l'ancien fichier de sauvegarde lorsque cela vous sera demandé -1. Réinsérez votre carte SD dans votre 3DS -1. Allumez à présent votre 3DS -1. Lancez "Steel Diver: Sub Wars" -1. Si l'exploit a réussi, votre console devrait avoir démarré l'Homebrew Launcher - + Vous pouvez voir une erreur indiquant qu'il n'y a pas d'applications trouvées. -1. Éteignez votre console. - -___ - -### Continuer vers [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/fr_FR/installing-boot9strap-(browser).txt b/_pages/fr_FR/installing-boot9strap-(browser).txt index 8ede854f9e..2d1441e0f3 100644 --- a/_pages/fr_FR/installing-boot9strap-(browser).txt +++ b/_pages/fr_FR/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installer boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Lecture requise + +new-browserhax-xl (lorsqu'il est combiné avec universal-otherapp) est compatible avec la version 11.14.0 sur les consoles New 3DS et New 2DS de toutes les régions. + +Cet exploit ne fonctionnera pas sur les Old 3DS, Old 3DS XL ou Old 2DS. Veuillez vous assurer que la console que vous moddez est une New 3DS, New 3DS XL ou New 2DS XL avant de continuer. +{: .notice--info} + ## Ce dont vous avez besoin +* La dernière version de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, ni le fichier `devkit`, ni le fichier `ntr`)* -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installer boot9strap (Browser)" 1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur +1. Copiez `otherapp.bin` vers la racine de votre carte SD et renommez-le en `arm11code.bin` + + Si vous ne voyez pas l'extension `.bin`, ne l'ajoutez pas à la fin du nom de fichier 1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD 1. Créez un dossier à la racine de votre carte SD nommé `boot9strap` -1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD -1. Copiez `SafeB9SInstaller.dat` et `Launcher.dat` depuis le dossier SafeB9SInstaller `.zip` à la racine de votre carte SD - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier `.zip` de boot9strap vers le dossier `boot9strap` sur votre carte SD +1. Copiez `SafeB9SInstaller.bin` depuis le fichier `.zip` de SafeB9SInstaller vers la racine de votre carte SD 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez à présent votre 3DS #### Section II - Lancer SafeB9SInstaller -1. Lancez le navigateur et allez à l’une des URL suivantes depuis votre console - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Assurez-vous d’essayer chaque URL si la première ne fonctionne pas (certaines versions ne peuvent pas utiliser la première, et certaines versions ne peuvent pas utiliser les deux dernières) +1. Allumez à présent votre 3DS +1. Sur le Menu HOME, appuyez sur L et R en même temps pour ouvrir l'appareil photo + + Si vous ne parvenez pas à ouvrir l'appareil photo, ouvrez le Navigateur Internet et saisissez manuellement l'URL (`https://zoogie.github.io/web/nbhax-xl/`) +1. Touchez le bouton QR code et scannez [ce QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + Si vous rencontrez une autre erreur, [suivez ce guide de dépannage](troubleshooting#a-browser-based-exploit-is-not-working) 1. Si l'exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installer boot9strap (Browser)" 1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants: + **"Show NAND or user string in System Settings"** 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer - + Si vous obtenez une erreur, continuez à la prochaine page ___ diff --git a/_pages/fr_FR/installing-boot9strap-(fredtool).txt b/_pages/fr_FR/installing-boot9strap-(fredtool).txt index b6a9b03306..9621d56712 100644 --- a/_pages/fr_FR/installing-boot9strap-(fredtool).txt +++ b/_pages/fr_FR/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installation de Boot9strap (Fredtool)" {% include toc title="Table des matières" %} +Les méthodes basées sur Seedminer ont été remplacées par des méthodes plus simples et plus sûres. Veuillez retourner à [Bien Démarrer](get-started) à moins que vous n'ayez une raison légitime de suivre cette page (si vos boutons L et R sont cassés). +{: .notice--warning} + ### Lecture requise Cette méthode d'utilisation de Seedminer pour une exploitation ultérieure utilise votre fichier `movable.sed` pour déchiffrer n'importe quel titre DSiWare afin d'injecter un titre DSiWare exploitable dans l'application Connexions Nintendo DS. Cela nécessite d'avoir une sauvegarde d'un DSiWare, par exemple à partir de BannerBomb ou de l'outil DSiWare Dumper. @@ -12,11 +15,11 @@ Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui ## Ce dont vous avez besoin -* Une sauvegarde d'un DSiWare (comme celle qui se trouve à la racine de votre carte SD qui provient de [BannerBomb3](bannerbomb3) ou de [DSiWare Dumper](dsidumper)) +* Une sauvegarde d'un DSiWare (comme celle qui se trouve à la racine de votre carte SD qui provient de [BannerBomb3](bannerbomb3)) * Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer) * La dernière version de [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * La dernière version de [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Préparatifs @@ -28,7 +31,7 @@ Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui #### Section II - Fredtool -1. Ouvrez [Fredtool](https://fredtool.bruteforcemovable.com/) sur votre ordinateur +1. Ouvrez [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) sur votre ordinateur 1. Sélectionnez votre fichier `movable.sed` pour le champ "Your movable.sed" 1. Sélectionnez votre fichier de sauvegarde DSiWare (`<8-character-id>.bin`) pour le champ "Your dsiware.bin" 1. Complétez le captcha "Je ne suis pas un robot" @@ -37,9 +40,9 @@ Ceci est une implémentation de l'exploit "FIRM partitions known-plaintext" qui 1. Une fois le processus terminé, téléchargez votre archive DSiWare modifiée depuis le site + Ce fichier contient 2 fichiers de sauvegarde DSiWare, un propre (non modifié) et un hax (exploité) 1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` sur votre carte SD - + Cet `` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) - + Ce dossier `` sera un autre dossier de 32 lettres/numéros dans le dossier `` - + Si le dossier `Nintendo DSiWare` n'existe pas, créez-le dans le dossier `` + + L'`` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) + + L'`` est un dossier de 32 caractères à l'intérieur du `` + + Si le dossier `Nintendo DSiWare` n'existe pas, créez-le à l'intérieur de `` 1. Copiez le fichier `42383841.bin` depuis le dossier `output/hax/` de l'archive DSiWare téléchargée (`fredtool_output.zip`) vers le dossier `Nintendo DSiWare` 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez à présent votre 3DS @@ -87,7 +90,7 @@ Si vous préférez un guide visuel pour cette section, un tel guide est disponib 1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur -1. Copiez le fichier `42383841.bin` depuis le dossier `output/clean/` de l'archive DSiWare téléchargée (`fredtool_output.zip`) vers le dossier `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` sur votre carte SD +1. Copiez le fichier `42383841.bin` du dossier `output/clean/` de l'archive DSiWare téléchargée (`fredtool_output.zip`) dans le dossier `Nintendo 3DS///Nintendo DSiWare/` de votre carte SD + Remplacez le fichier `42383841.bin` existant 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez à présent votre 3DS diff --git a/_pages/fr_FR/installing-boot9strap-(frogtool).txt b/_pages/fr_FR/installing-boot9strap-(frogtool).txt index 8ee006fc1a..835776068e 100644 --- a/_pages/fr_FR/installing-boot9strap-(frogtool).txt +++ b/_pages/fr_FR/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installation de Boot9strap (Frogtool)" {% include toc title="Table des matières" %} +Les méthodes basées sur Seedminer ont été remplacées par des méthodes plus simples et plus sûres. Veuillez retourner à [Bien Démarrer](get-started) à moins que vous n'ayez une raison légitime de suivre cette page (si vos boutons L et R sont cassés). +{: .notice--warning} + ### Lecture requise Nous allons maintenant utiliser notre accès à l'Homebrew Launcher pour exécuter l'utilitaire Frogtool afin d'injecter la version japonaise exploitable du titre "Flipnote Studio", que nous utilisons pour exécuter b9sTool et installer boot9strap. @@ -18,14 +21,14 @@ Pour utiliser les liens suivants [magnet](https://fr.wikipedia.org/wiki/Magnet_( * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * La dernière version de [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * La dernière version de [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Préparatifs 1. Insérez votre carte SD dans votre ordinateur 1. Copiez votre fichier `movable.sed` à la racine de votre carte SD 1. Copiez `boot.firm` et `boot.3dsx` depuis le fichier `.zip` de Luma3DS vers la racine de votre carte SD -1. Copiez `boot.nds` (B9STool) depuis le fichier `.zip` de b9sTool vers la racine de votre carte SD +1. Copiez `boot.nds` (b9sTool) depuis le fichier `.zip` de b9sTool vers la racine de votre carte SD 1. Copiez `Frogtool.3dsx` dans le dossier `/3ds/` de votre carte SD 1. Copiez `frogcert.bin` à la racine de votre carte SD 1. Réinsérez votre carte SD dans votre 3DS @@ -74,6 +77,26 @@ Si vous préférez un guide visuel pour cette section, un tel guide est disponib 1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + Votre console devrait afficher le Menu HOME après un court instant. Si vous avez un écran noir depuis plus de 5 minutes, [suivez ce guide de dépannage](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restauration du Mode téléchargement + +1. Lancez l'application Mode Téléchargement (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Attendez jusqu'à ce que vous voyiez les deux boutons + + N'appuyez sur aucun des deux boutons +1. Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina +1. Sélectionnez "Miscellaneous options" +1. Sélectionnez "Switch the hb. title to the current app." +1. Appuyez sur (B) pour continuer +1. Appuyez sur (B) pour revenir au menu principal de Rosalina +1. Appuyez sur (B) pour quitter le menu Rosalina +1. Appuyez sur (Home), puis fermez Mode téléchargement +1. Relancez l’application Mode téléchargement +1. Votre console devrait maintenant charger le Homebrew Launcher +1. Lancez Frogtool depuis la liste des homebrews +1. Sélectionnez l'option "RESTORE patched DS Download Play" +1. Une fois cette opération terminée, lisez les écrans et vérifiez si le processus a réussi + + S'il y a des erreurs ou des fichiers manquants, corrigez le problème et réessayez +1. Si le processus a réussi, appuyez sur l'écran tactile, puis appuyez sur START pour quitter + ___ ### Continuer vers [Finalisation de l'installation](finalizing-setup) diff --git a/_pages/fr_FR/installing-boot9strap-(hardmod).txt b/_pages/fr_FR/installing-boot9strap-(hardmod).txt index 45c5d0c275..0d73d183d0 100644 --- a/_pages/fr_FR/installing-boot9strap-(hardmod).txt +++ b/_pages/fr_FR/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ Cela fonctionne sur la New3DS, Old3DS, New 2DS et Old 3DS sur *toutes* les versi * La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, ni le fichier `devkit`, ni le fichier `ntr`)* * La dernière version de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Les utilisateurs de Windows peuvent utiliser le `.exe` compilé, tandis que les utilisateurs Mac et Linux devront avoir [Python 3](https://www.python.org/downloads/) installé pour exécuter le `.py` -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) * Le `.firm` correspondant à votre console et version: | Version(s) | Kernel | Old 3DS ou Old 2DS | New 3DS ou New 2DS | diff --git a/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt b/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt index 80c52c6b0f..cc12fddca9 100644 --- a/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/fr_FR/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installation de boot9strap (HBL-USM)" --- -{% include toc title="Table des matières" %} - -### Lecture requise - -Afin d'exploiter le firmware SAFE_MODE de notre console, nous devons injecter un profil Wi-Fi exploité. - -Comme nous avons déjà un accès Homebrew, nous pouvons utiliser slotTool pour faire cela. - -Cette méthode spécifique est destinée à être utilisée avec l'accès au Homebrew Launcher via [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -Si vous avez un accès à l'Homebrew Launcher via un autre point d'entrée, vous devriez utiliser [Frogtool](installing-boot9strap-(frogtool)). - -Une fois le profil WiFi injecté, nous utiliserons SAFE_MODE, qui est une fonctionnalité de récupération présente sur toutes les consoles 3DS, pour activer le profil WiFi exploité. - -Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée indiquées par les lettres U, E, J ou K après le numéro de version de la console. - -Si vos boutons (L/R), (Haut sur la croix directionnelle) ou (A) ne fonctionnent pas, vous devrez utiliser une [Ancienne Méthode](legacy-methods). Pour obtenir de l'aide, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide en anglais. -{: .notice--danger} - -## Ce dont vous avez besoin - -* Le fichier zip de la dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Le fichier zip de la dernière version de [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Préparatifs - -1. Votre console devrait être allumée et montrer le Homebrew Launcher de la partie précédente du guide -1. Lancez slotTool depuis la liste des homebrews - + Si vous êtes coincé sur un écran rouge, éteignez la console de manière forcée en maintenant le bouton d'alimentation enfoncé pendant quinze secondes, puis recommencez les étapes de cette section -1. Sélectionnez l'option "INSTALL exploit to wifi slots 1,2,3 & shutdown" - + Vous verrez du texte à l'écran et votre console s'éteindra -1. Retirez la carte SD de votre console et insérez-la dans votre ordinateur -1. Copiez le fichier `boot.firm` du fichier `.zip` de Luma3DS vers la racine de votre carte SD, en écrasant les fichiers existants si nécessaire -1. Copiez `usm.bin` de l'archive unSAFE_MODE `.zip` vers la racine de votre carte SD -1. Réinsérez la carte SD dans votre console - -#### Section II - unSAFE_MODE - -1. Votre console toujours éteinte, maintenez enfoncé les boutons suivants : (L) + (R) + (Haut sur la croix directionnelle) + (A), puis appuyez sur (Power) - + Maintenez les boutons enfoncés jusqu'à ce que la console démarre en mode sans échec -1. Appuyez sur "OK" pour accepter la mise à jour - + Aucune mise à jour nécessaire. Ceci fait partie de l'exploit -1. Appuyez sur « J'accepte » pour accepter les termes et conditions -1. La mise à jour finira par échouer, avec le code d'erreur `003-1099`. Ne vous inquiétez pas, c'est normal -1. Lorsque votre console vous demande "Paramétrer la connexion Internet de la console ?", sélectionnez "Paramétrer" -1. Dans le menu suivant, accédez à `Connexion 1` -> `Modifier` -> `Page suivante (flèche de droite)` -> `Serveur proxy` -> `Paramètres avancés` - + Voici une [représentation visuelle](https://uwuu.ca/images/safemode_highlighted.png) -1. Une fois que vous voyez `B9S install SUCCESS` sur l'écran du haut, appuyez sur n'importe quel bouton pour redémarrer sur le menu de configuration de Luma - -#### Section III - Configuration de Luma3DS - -1. Votre console devrait afficher automatiquement le menu de configuration de Luma -1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants: - + **"Show NAND or user string in System Settings"** -1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer - + Votre console devrait afficher le Menu HOME après un court instant. Si vous avez un écran noir depuis plus de 5 minutes, [suivez ce guide de dépannage](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restauration des profils de connexion Wi-Fi - -1. Lancez l’application Mode téléchargement -1. Attendez jusqu'à ce que vous voyiez les deux boutons - + N'appuyez sur aucun des deux boutons -1. Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina -1. Sélectionnez "Miscellaneous options" -1. Sélectionnez "Switch the hb. title to the current app." -1. Appuyez sur (B) pour continuer -1. Appuyez sur (B) pour revenir au menu principal de Rosalina -1. Appuyez sur (B) pour quitter le menu Rosalina -1. Appuyez sur (Home), puis fermez Mode téléchargement -1. Relancez l’application Mode téléchargement -1. Votre console devrait maintenant charger le Homebrew Launcher -1. Lancez slotTool depuis la liste des homebrews -1. Sélectionnez "RESTORE original wifi slots 1,2,3" -1. Votre console va alors redémarrer - -___ - -### Continuer vers [Finalisation de l'installation](finalizing-setup) -{: .notice--primary} +Cette page a été supprimée car la méthode utilisée est obsolète. Veuillez suivre une méthode plus récente trouvable sur la page [Bien Démarrer](get-started). +{: .notice--warning} diff --git a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt index 348b2d5720..8a5bf28e45 100644 --- a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt +++ b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt @@ -10,28 +10,28 @@ Pour utiliser les liens suivants [magnet](https://fr.wikipedia.org/wiki/Magnet_( ## Ce dont vous avez besoin -* Un aimant qui déclenche le mode veille de votre console +* Un aimant qui déclenche le mode veille de votre console (si vous avez une console pliable) * Votre linker DS * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, ni le fichier `devkit`, ni le fichier `ntr`)* -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Préparatifs 1. Éteignez votre 3DS -1. Insérez la carte SD de votre appareil dans votre ordinateur +1. Insérez la carte SD de votre console dans votre ordinateur + Ceci signifie la carte SD de votre 3DS, et *non* la carte SD de votre linker -1. Copiez `SafeB9SInstaller.firm` à la racine de votre carte SD et renommez en `boot.firm` -1. Copiez `boot.3dsx` du fichier `.zip` de Luma3DS vers la racine de votre carte SD -1. Créez un dossier à la racine de votre carte SD nommé `boot9strap` -1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD +1. Copiez `SafeB9SInstaller.firm` à la racine de votre carte SD et renommez-le en `boot.firm` +1. Copiez `boot.3dsx` depuis le fichier `.zip` de Luma3DS vers la racine de votre carte SD +1. Créez un dossier nommé `boot9strap` à la racine de votre carte SD +1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier `.zip` de boot9strap vers le dossier `/boot9strap/` sur votre carte SD ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Réinsérez votre carte SD dans votre 3DS +1. Réinsérez la carte SD dans votre 3DS 1. Allumez à présent votre 3DS #### Section II - ntrboot diff --git a/_pages/fr_FR/installing-boot9strap-(pichaxx).txt b/_pages/fr_FR/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..1d0cb55062 --- /dev/null +++ b/_pages/fr_FR/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installation de boot9strap (PicHaxx)" +--- + +{% include toc title="Table des matières" %} + +Les méthodes basées sur Seedminer ont été remplacées par des méthodes plus simples et plus sûres. Veuillez retourner à [Bien Démarrer](get-started) à moins que vous n'ayez une raison légitime de suivre cette page (si vos boutons L et R sont cassés). +{: .notice--warning} + +### Lecture requise + +Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour écrire un fichier de sauvegarde modifié pour Pokémon Picross, qui peut ensuite être utilisé avec universal-otherapp pour exécuter SafeB9SInstaller. + +## Ce dont vous avez besoin + +* Le jeu "Pokémon Picross" (gratuit sur l'eShop) +* Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer) +* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) +* La dernière version de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Préparatifs + +1. Éteignez votre 3DS +1. Insérez votre carte SD dans votre ordinateur +1. Copiez `otherapp.bin` à la racine de votre carte SD +1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD +1. Créez un dossier à la racine de votre carte SD nommé `boot9strap` +1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD +1. Copiez `SafeB9SInstaller.bin` depuis le fichier `.zip` de SafeB9SInstaller à la racine de votre carte SD + +#### Section II - PicHaxx + +1. Ouvrez [le site Web de PicHaxx Injector](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) sur votre ordinateur +1. Sélectionnez votre fichier `movable.sed` +1. Sélectionnez "Build and Download" +1. Attendez la fin de l'opération +1. Accédez à `Nintendo 3DS` ->``->``->`title` -> `00040000` ->` 0017c100` -> `data` sur votre carte SD + + L'`` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) + + Le `` est un dossier de 32 caractères à l'intérieur du `` +1. Copiez le fichier fraîchement téléchargé `00000001.sav` vers le dossier `data` sur votre carte SD + + Remplacez l'ancien fichier de sauvegarde lorsque cela vous sera demandé +1. Réinsérez votre carte SD dans votre 3DS +1. Allumez à présent votre 3DS +1. Lancez "Pokémon Picross" +1. Si l'exploit a réussi, votre console devrait avoir démarré sur SafeB9SInstaller + +#### Section III - Installation de boot9strap + +1. Attendez que tous les tests de sécurité soient finis +1. Quand cela est demandé, appuyez sur la combinaison de boutons donnée pour installer boot9strap +1. Une fois que c'est fini, appuez sur (A) pour redémarrer l'appareil. + +#### Section IV - Configuration de Luma3DS + +1. Votre console va redémarrer dans la configuration de Luma3DS + + Si vous avez un écran noir, [suivez ce guide de dépannage](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants: + + **"Show NAND or user string in System Settings"** +1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + + Si vous obtenez une erreur, continuez à la prochaine page + +___ + +### Continuer vers [Finalisation de l'installation](finalizing-setup) +{: .notice--primary} diff --git a/_pages/fr_FR/installing-boot9strap-(safecerthax).txt b/_pages/fr_FR/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..2718a1fa51 --- /dev/null +++ b/_pages/fr_FR/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installation de boot9strap (safecerthax)" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +safecerthax est compatible avec toutes les consoles Old 3DS et Old 2DS de toutes les régions. + +Si vos boutons (L et R), (Haut sur la croix directionnelle) ou (A) ne fonctionnent pas, ou si votre FAI redirige les changements DNS, vous devrez utiliser une méthode alternative, comme [Seedminer](seedminer). Pour obtenir de l'aide, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide en anglais. +{: .notice--warning} + +Cet exploit ne fonctionnera pas sur les New 3DS, New 3DS XL ou New 2DS. Veuillez vous assurer que la console que vous moddez est une Old 3DS, Old 3DS XL ou Old 2DS XL avant de continuer. +{: .notice--info} + +## Ce dont vous avez besoin + +* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Préparatifs +1. Éteignez votre 3DS +1. Insérez votre carte SD dans votre ordinateur +1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD +1. Créez un dossier à la racine de votre carte SD nommé `boot9strap` +1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier `.zip` de boot9strap vers le dossier `boot9strap` sur votre carte SD +1. Copiez `SafeB9SInstaller.bin` depuis le fichier `.zip` de SafeB9SInstaller vers la racine de votre carte SD +1. Réinsérez votre carte SD dans votre 3DS +1. Allumez à présent votre 3DS + +#### Section II - safecerthax DNS +1. Lancez l'application Paramètres de la console +1. Naviguez vers `Paramètres Internet` -> `Paramètres de connexion` +1. Cliquez sur votre emplacement de connexion réseau et allez dans `Modifier` -> `Page suivante (flèche de droite)` -> `DNS` +1. Réglez "Obtention automatique d'un DNS" sur "Non", puis cliquez sur `Paramètres avancés` +1. Définissez le DNS primaire et le DNS secondaire sur `054.038.133.070` +1. Cliquez sur OK, puis sur Sauvegarder +1. Lorsque vous y êtes invité, cliquez sur "Test" pour effectuer le test de connexion + + Le test devrait réussir +1. Éteignez votre 3DS + +#### Section III - safecerthax +1. Votre console toujours éteinte, maintenez les boutons suivants: (L) + (R) + (Croix directionnelle en haut) + (A), puis appuyez sur (Power) + + Continuez à maintenir les boutons enfoncés jusqu'à ce que la console démarre en mode sans échec +1. Appuyez sur "OK" pour accepter la mise à jour + + Aucune mise à jour nécessaire. Ceci fait partie de l'exploit +1. Appuyez sur « J'accepte » pour accepter les termes et conditions + + La mise à jour devrait échouer et un message d'erreur devrait apparaître + + Si la mise à jour n'échoue pas, il est possible que votre FAI redirige les changements DNS. Essayez une autre connexion Internet, ou suivez une autre méthode, comme [Seedminer](seedminer). +1. Appuyez sur "OK" pour fermer le message d'erreur +1. Si l'exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller + + Si la console se bloque ou plante, forcez la mise hors tension de la console, puis recommencez cette section + +#### Section IV - Installation de boot9strap + +1. Attendez que tous les tests de sécurité soient finis +1. Quand cela est demandé, appuyez sur la combinaison de boutons donnée pour installer boot9strap +1. Une fois que c'est fini, appuez sur (A) pour redémarrer l'appareil. + +#### Section V - Configuration de Luma3DS + +1. Votre console va redémarrer dans la configuration de Luma3DS + + Si vous avez un écran noir, [suivez ce guide de dépannage](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants: + + **"Show NAND or user string in System Settings"** +1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + +#### Section VI - Restauration du DNS par défaut +1. Lancez l'application Paramètres de la console +1. Naviguez vers `Paramètres Internet` -> `Paramètres de connexion` +1. Cliquez sur votre emplacement de connexion réseau et allez dans `Modifier` -> `Page suivante (flèche de droite)` -> `DNS` +1. Réglez "Obtention automatique d'un DNS" sur "Oui" +1. Cliquez sur OK, puis sur Sauvegarder +1. Lorsque vous y êtes invité, cliquez sur "Test" pour effectuer le test de connexion + + Le test devrait réussir +1. Éteignez votre 3DS + +___ + +### Continuer vers [Finalisation de l'installation](finalizing-setup) +{: .notice--primary} diff --git a/_pages/fr_FR/installing-boot9strap-(soundhax).txt b/_pages/fr_FR/installing-boot9strap-(soundhax).txt index f67b2ae23f..5d06d6e2a7 100644 --- a/_pages/fr_FR/installing-boot9strap-(soundhax).txt +++ b/_pages/fr_FR/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installer boot9strap (Soundhax)" ### Lecture requise -Soundhax (lorsque combiné avec pre9otherapp) est compatible avec les versions comprises entre 2.1.0 et 8.1.0 pour les régions EUR, JPN, KOR et USA. - -{% capture notice-1 %} - -Les mises à jour par cartouche vont mettre uniquement à jour les fonctionnalités principales telles que les Paramètres Systèmes, le Menu Home, etc. les mises à jour par cartouche ne vont pas mettre à jour le Studio Son Nintendo 3DS et les fonctionnalités Internet comme le Transfert Système, le Navigateur Internet, la Place Mii Streetpass ou le Nintendo eShop. - -Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une version contenant une ancienne version du Studio Son Nintendo 3DS *(< 2.1.0)* à une autre qui a introduit une version plus récente du Studio Son Nintendo 3DS cassera Soundhax ! Vous aurez besoin d'une méthode alternative de lancement de l'Homebrew Launcher comme [Installer boot9strap (navigateur)](installing-boot9strap-(browser)) ou [Installer boot9strap (MSET)](installing-boot9strap-(mset)) ! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (quand combiné avec pre9otherapp) est compatible avec les versions comprises entre 1.0.0 et 11.3.0 de toutes les régions. ## Ce dont vous avez besoin * La dernière version de [Soundhax](http://soundhax.com) *(en fonction de votre console, de son modèle, et de sa région)* + + Si Soundhax apparaît dans votre navigateur comme une vidéo illisible, appuyez sur Ctrl + S ou Cmd + S pour l'enregistrer sur votre ordinateur * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, ni le fichier `devkit`, ni le fichier `ntr`)* -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La dernière version de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* La dernière version de [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(le fichier `.bin`correspondant à la version du firmware de votre console)* +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) +* La dernière version de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une 1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur 1. Copiez le fichier SoundHax `.m4a` à la racine de votre carte SD -1. Copiez le payload pre9otherapp vers la racine de votre carte SD et renommez-le en `otherapp.bin` -1. Copiez `boot.firm` du fichier `.zip` de Luma3DS vers la racine de votre carte SD -1. Copiez `boot.3dsx` à la racine de votre carte SD +1. Copiez `otherapp.bin` à la racine de votre carte SD +1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD 1. Créez un dossier à la racine de votre carte SD nommé `boot9strap` 1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD -1. Copiez `arm9.bin` depuis le fichier `.zip` de SafeB9SInstaller vers la racine de votre carte SD +1. Copiez `SafeB9SInstaller.bin` depuis le fichier `.zip` de SafeB9SInstaller à la racine de votre carte SD 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez à présent votre 3DS @@ -55,7 +45,7 @@ Cela signifie que l’utilisation d’une mise à jour via cartouche depuis une + Lancer SoundHax immédiatement ferait réapparaitre le tutoriel à chaque lancement de Studio Son Nintendo 3DS jusqu'à ce qu'il soit correctement complété 1. Naviguez vers `/SDCARD`, puis lisez le fichier "<3 nedwill 2016" + Il se peut que cela nécessite plusieurs tentatives - + Si la console freeze (ne répond plus), forcez-la simplement à s'éteindre on maintenant le bouton Power, puis réessayez + + Si la console ne répond plus, forcez-la simplement à s'éteindre en maintenant le bouton Power, puis réessayez ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/fr_FR/installing-boot9strap-(ssloth-browser).txt b/_pages/fr_FR/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..86d4aa2100 --- /dev/null +++ b/_pages/fr_FR/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installation de boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +SSLoth permet aux utilisateurs sur la version 11.13.0 et versions antérieures de contourner la vérification de la version du navigateur web, permettant l'utilisation de new-browserhax ou old-browserhax, qui peuvent ensuite être utilisés en conjonction avec universal-otherapp. + +Si vous avez mis à jour votre console vers votre version actuelle en utilisant une carte de jeu, votre Navigateur Internet ne sera pas accessible. Si c'est le cas, vous devrez mettre à jour votre console vers la dernière version via les Paramètres de la console, puis suivre la méthode pour la dernière version. +{: .notice--warning} + +## Ce dont vous avez besoin + +* La dernière version de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Préparatifs + +1. Éteignez votre 3DS +1. Insérez votre carte SD dans votre ordinateur +1. Copiez `otherapp.bin` vers la racine de votre carte SD et renommez-le en `arm11code.bin` + + Si vous ne voyez pas l'extension `.bin`, ne l'ajoutez pas à la fin du nom de fichier +1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD +1. Créez un dossier à la racine de votre carte SD nommé `boot9strap` +1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier `.zip` de boot9strap vers le dossier `boot9strap` sur votre carte SD +1. Copiez `SafeB9SInstaller.bin` depuis le fichier `.zip` de SafeB9SInstaller à la racine de votre carte SD +1. Réinsérez votre carte SD dans votre 3DS +1. Allumez à présent votre 3DS + +#### Section II - SSLoth +1. Lancez l'application Paramètres de la console +1. Naviguez vers `Paramètres Internet` -> `Paramètres de connexion` +1. Cliquez sur votre emplacement de connexion réseau et allez dans `Modifier` -> `Page suivante (flèche de droite)` -> `DNS` +1. Réglez "Obtention automatique d'un DNS" sur "Non", puis cliquez sur `Paramètres avancés` +1. Définissez le DNS primaire et le DNS secondaire sur `054.038.133.070` +1. Cliquez sur OK, puis sur Sauvegarder +1. Lorsque vous y êtes invité, cliquez sur "Test" pour effectuer le test de connexion + + Le test devrait réussir +1. Éteignez votre 3DS + +#### Section III - Lancer SafeB9SInstaller +1. Allumez à présent votre 3DS +1. Sur le Menu HOME, appuyez sur L et R en même temps pour ouvrir l'appareil photo + + Si vous ne parvenez pas à ouvrir l'appareil photo, ouvrez le Navigateur Internet et saisissez manuellement l'URL (`https://zoogie.github.io/web/nbhax/`) +1. Touchez le bouton QR code et scannez [ce QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Si vous rencontrez une autre erreur, [suivez ce guide de dépannage](troubleshooting#a-browser-based-exploit-is-not-working) + + Si le Navigateur Web vous invite à faire une mise à jour, il est possible que votre FAI redirige les changements DNS. Essayez une autre connexion Internet, ou mettez à jour votre console vers la dernière version et suivez [Installation de boot9strap (Browser)](installing-boot9strap-(browser)). +1. Si l'exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller + +#### Section IV - Installation de boot9strap + +1. Attendez que tous les tests de sécurité soient finis +1. Quand cela est demandé, appuyez sur la combinaison de boutons donnée pour installer boot9strap +1. Une fois que c'est fini, appuez sur (A) pour redémarrer l'appareil. + +#### Section V - Configuration de Luma3DS + +1. Votre console va redémarrer dans la configuration de Luma3DS + + Si vous avez un écran noir, [suivez ce guide de dépannage](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants: + + **"Show NAND or user string in System Settings"** +1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + +#### Section VI - Restauration du DNS par défaut +1. Lancez l'application Paramètres de la console +1. Naviguez vers `Paramètres Internet` -> `Paramètres de connexion` +1. Cliquez sur votre emplacement de connexion réseau et allez dans `Modifier` -> `Page suivante (flèche de droite)` -> `DNS` +1. Réglez "Obtention automatique d'un DNS" sur "Oui" +1. Cliquez sur OK, puis sur Sauvegarder +1. Lorsque vous y êtes invité, cliquez sur "Test" pour effectuer le test de connexion + + Le test devrait réussir +1. Éteignez votre 3DS + +___ + +### Continuer vers [Finalisation de l'installation](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/fr_FR/installing-boot9strap-(usm).txt b/_pages/fr_FR/installing-boot9strap-(usm).txt index bba91ab6f0..c775c392f8 100644 --- a/_pages/fr_FR/installing-boot9strap-(usm).txt +++ b/_pages/fr_FR/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installation de boot9strap (USM)" {% include toc title="Table des matières" %} +Les méthodes basées sur Seedminer ont été remplacées par des méthodes plus simples et plus sûres. Veuillez retourner à [Bien Démarrer](get-started) à moins que vous n'ayez une raison particulière de vouloir suivre cette page (si vos boutons L et R sont cassés, par exemple). +{: .notice--warning} + ### Lecture requise Afin d'exploiter le firmware SAFE_MODE de notre console, nous devons injecter un profil Wi-Fi exploité. @@ -17,30 +20,31 @@ Une fois le profil WiFi injecté, nous utiliserons SAFE_MODE, qui est une foncti Ces instructions fonctionnent dans les régions USA, Europe, Japon et Corée indiquées par les lettres U, E, J ou K après le numéro de version de la console. Si vos boutons (L/R), (Haut sur la croix directionnelle) ou (A) ne fonctionnent pas, vous devrez utiliser une [Ancienne Méthode](legacy-methods). Pour obtenir de l'aide, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez de l'aide en anglais. -{: .notice--danger} +{: .notice--warning} ## Ce dont vous avez besoin * Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer) -* Le fichier zip de la dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Préparatifs -1. Ouvrez [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) sur votre ordinateur - + Si ce site n'est pas fonctionnel, essayez d'utiliser [celui-ci](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. Si votre console est allumée, éteignez la +1. Ouvrez [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) sur votre ordinateur 1. Téléchargez votre movable.sed en utilisant l'option "Choisir le fichier" 1. Cliquez sur "Download unSAFE_MODE-bb3 archive" - + Ceci va télécharger un exploit DSiWare appelé `F00D43D5.bin` et un fichier d'exploit SAFE_MODE appelé `usm.bin` dans un dossier zip (`unSAFE_MODE-bb3.zip`) -1. Si votre console est allumée, éteignez-la + + Ceci va télécharger un exploit DSiWare appelé `F00D43D5.bin` et un fichier d'exploit SAFE_MODE appelé `usm.bin` dans une archive zip (`unSAFE_MODE-bb3.zip`) 1. Insérez votre carte SD dans votre ordinateur 1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD -1. Copiez `usm.bin` depuis l'archive USM (`unSAFE_MODE-bb3.zip`) vers la racine de votre carte SD -1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` sur votre carte SD - + Cet `` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) - + Si `Nintendo DSiWare` n'existe pas, créez-le + + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier +1. Copiez `usm.bin` depuis l'archive `unSAFE_MODE-bb3.zip` vers la racine de votre carte SD +1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` sur votre carte SD + + L'`` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) + + L'`` est un dossier de 32 caractères à l'intérieur du dossier `` + + Si `Nintendo DSiWare` n'existe pas, créez-le à l'intérieur du dossier `` 1. S'il y a des copies de DSiWare existantes (`.bin`) dans ce dossier, déplacez-les sur votre PC + Cela vous laissera avec un dossier Nintendo DSiWare vide. Déplacer ces fichiers sur votre PC vous permet de ne pas perdre vos éventuelles sauvegardes existantes -1. Copiez le fichier `F00D43D5.bin` depuis l'archive USM (`unSAFE_MODE-bb3.zip`) vers le dossier `Nintendo DSiWare` +1. Copiez le fichier `F00D43D5.bin` depuis `unSAFE_MODE-bb3.zip` vers le dossier `Nintendo DSiWare` #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ Si vos boutons (L/R), (Haut sur la croix directionnelle) ou (A) ne fonctionnent #### Section III - unSAFE_MODE -1. Votre console toujours éteinte, maintenez enfoncé les boutons suivants : (L) + (R) + (Haut sur la croix directionnelle) + (A), puis appuyez sur (Power) - + Relâchez les boutons après quelques secondes. Votre console démarrera en mode sans échec +1. Avec votre console toujours éteinte, maintenez les boutons suivants: (L) + (R) + (Haut sur la croix directionnelle) + (A), puis appuyez sur (Power) + + Maintenez les boutons enfoncés jusqu'à ce que la console démarre en mode sans échec 1. Appuyez sur "OK" pour accepter la mise à jour + Aucune mise à jour nécessaire. Ceci fait partie de l'exploit 1. Appuyez sur « J'accepte » pour accepter les termes et conditions 1. La mise à jour finira par échouer, avec le code d'erreur `003-1099`. Ne vous inquiétez pas, c'est normal 1. Lorsque votre console vous demande "Paramétrer la connexion Internet de la console ?", sélectionnez "Paramétrer" 1. Dans le menu suivant, accédez à `Connexion 1` -> `Modifier` -> `Page suivante (flèche de droite)` -> `Serveur proxy` -> `Paramètres avancés` + + Voici une [représentation visuelle](https://uwuu.ca/images/safemode_highlighted.png) 1. Une fois que vous voyez `B9S install SUCCESS` sur l'écran du haut, appuyez sur n'importe quel bouton pour redémarrer sur le menu de configuration de Luma #### Section IV - Configuration de Luma3DS @@ -79,12 +84,10 @@ Si vos boutons (L/R), (Haut sur la croix directionnelle) ou (A) ne fonctionnent 1. Naviguez vers`Gestion des données` -> `DSiWare` 1. Cliquez sur l'onglet Carte SD + Votre écran du bas devrait clignoter en Vert, puis la console redémarrera sur le menu HOME quelques secondes plus tard. Cela signifie que vos profils de connexion WiFi ont été restaurés avec succès -1. Éteignez votre console +1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur -1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` sur votre carte SD - + Cet `` sera le même que celui que vous avez utilisé dans [Seedminer](seedminer) +1. Naviguez vers `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` sur votre carte SD 1. Supprimez `F00D43D5.bin` de votre dossier Nintendo DSiWare -1. Continuez vers la finalisation de l'installation ___ diff --git a/_pages/fr_FR/legacy-methods.txt b/_pages/fr_FR/legacy-methods.txt index b5e82ec1b6..5febbe78e1 100644 --- a/_pages/fr_FR/legacy-methods.txt +++ b/_pages/fr_FR/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Anciennes Méthodes" Il y a eu de multiples améliorations et avancées dans les méthodes d'installation du CFW au cours de ces derniers temps. -C'est pour cette raison qu'il est recommandé d'utiliser la méthode la plus récente que vous trouverez sur la page [Bien Démarrer](get-started). +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. Cependant, des méthodes "anciennes" ou périmées sont conservées ici à diverses fins. Elles nécessiteront que vous ayez au préalable suivi [Seedminer](seedminer). @@ -18,7 +18,7 @@ Si vous avez besoin d'aide, rejoignez [Nintendo Homebrew sur Discord](https://di Les exploits suivants utilisent l'une des deux applications du mode DS intégrées à la 3DS : Connexions Nintendo DS et Téléchargement DS. -Si les applications Connexions Nintendo DS et Téléchargement DS ne fonctionnent pas, vous devrez les réparer avec [TWLFix-3DS](https://github. om/MechanicalDragon0687/TWLFix-3DS/releases/) en utilisant un point d'entrée homebrew, tel que Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### Test des Paramètres Internet DS (utilisé pour Fredtool) @@ -38,9 +38,7 @@ Si les applications Connexions Nintendo DS et Téléchargement DS ne fonctionnen ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + Cette méthode nécessite que les gâchettes L et R soient fonctionnelles 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + Cette méthode est recommandée si vos boutons L et R ne fonctionnent pas -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + Cette méthode est recommandée si votre menu Gestion des Nintendo DSiWare plante \ No newline at end of file diff --git a/_pages/fr_FR/ntrboot.txt b/_pages/fr_FR/ntrboot.txt index a5e350337f..33276e99cf 100644 --- a/_pages/fr_FR/ntrboot.txt +++ b/_pages/fr_FR/ntrboot.txt @@ -17,23 +17,23 @@ Note : les linkers avec une "bombe à retardement" ne seront plus capables de la | Linker | Prix actuel | "Bombe à retardement" ? | Compatible 3DS ? | Compatible DSi ? | Autres notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | €15.99 | 3 Septembre 2019 | <= 11.13.0 | <= 1.4.5 | **Arrive déjà flashée avec ntrboot**; elle peut être reflashée en un linker NDS normal. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | 19.99€ | Non | <= 11.13.0 | <= 1.4.5 | **Arrive déjà flashée avec ntrboot** ([un interrupteur à l'intérieur de la cartouche permet de changer entre les modes ntrboot et NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); ne pas flasher manuellement avec ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | 15.99€ | 3 Septembre 2024 | <= 11.14.0 | <= 1.4.5 | **Arrive pré-flashée avec ntrboot**; peut être reflashée en tant que linker NDS. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | 19.99€ | Non | <= 11.14.0 | <= 1.4.5 | **Arrive pré-flashée avec ntrboot** ([interrupteur interne pour basculer entre les modes ntrboot et NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); ne pas flasher manuellement avec ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | 30,99 € | Non | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | 9,99€ | Non | Aucun | Aucun | Uniquement les modèles avec un [type de mémoire flash particulier](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) sont compatibles avec ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | 19.99€ | Non | <= 11.13.0 | <= 1.4.5 | Toutes les révisions RTS sont compatibles. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | 13.99€ | 1.87 : 3 Septembre 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | 9.99€ | 3.9b : 3 Septembre 2019 | <= 11.13.0 | <= 1.4.5 | Tous les linkers R4iSDHC 20XX sont identiques. Les modèles 2013 sont incompatibles. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | 13.99€ | 3.9b : 3 Septembre 2019 | <= 11.13.0 | <= 1.4.5 | Tous les linkers R4iSDHC 20XX sont identiques. Les modèles 2013 sont incompatibles. | -| **Ace3DS X** | | Non | <= 11.13.0 | <= 1.4.5 | **Arrive déjà flashée avec ntrboot** (Un interrupteur externe permet de changer entre le mode ntrboot ("3DS") et le mode NDS); ne pas flasher manuellement avec ntrboot. | -| **Ace3DS Plus** | | Non | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | 19.99€ | Non | <= 11.14.0 | <= 1.4.5 | Toutes les révisions RTS sont compatibles. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | 13.99€ | 1.85b: 3 Septembre 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | 9.99€ | 4.0b: 3 Septembre 2024 | <= 11.14.0 | <= 1.4.5 | Tous les linkers R4iSDHC 20XX sont identiques. Les modèles 2013 sont incompatibles. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | 13.99€ | 4.0b: 3 Septembre 2024 | <= 11.14.0 | <= 1.4.5 | Tous les linkers R4iSDHC 20XX sont identiques. Les modèles 2013 sont incompatibles. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Arrive pré-flashée avec ntrboot** (interrupteur externe pour basculer entre les modes ntrboot ("3DS") et NDS); ne pas flasher manuellement avec ntrboot. | +| **Ace3DS Plus** | | Non | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | Non | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | Non | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | Non | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | Non | Aucun | Aucun | | | **R4i Gold 3DS Deluxe "Starter"** | | Non | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | Non | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Inconnu | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b : 3 Septembre 2019 | <= 11.13.0 | <= 1.4.5 | Tous les linkers R4iSDHC 20XX sont identiques. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Inconnu | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: 3 Septembre 2024 | <= 11.14.0 | <= 1.4.5 | Tous les linkers R4iSDHC 20XX sont identiques. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/fr_FR/region-changing.txt b/_pages/fr_FR/region-changing.txt index 3e5f502bbd..2f647d5e08 100644 --- a/_pages/fr_FR/region-changing.txt +++ b/_pages/fr_FR/region-changing.txt @@ -17,7 +17,7 @@ Notez que si vous avez n’importe quel autre payload que `GodMode9.firm` dans l Ce processus déliera votre NNID de votre console, car celui-ci ne sera plus compatible avec. Les NNIDs sont restreints à la région de la console qui les a créés, et ne peuvent pas être transférés dans une autre régions sans [manipulations complexes et avancées](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -A l'issue de ce processus, seules **les New 3DS qui n'ont jamais accédé à l'eshop auparavant** et **toutes les Old 3DS** seront capables d'accéder à l'eshop après avoir créé un nouvel NNID associé à la nouvelle région de la console. Les New 3DS qui ont déjà accédé à l'eshop depuis leur région d'origine ne pourront pas créer un nouvel NNID ni accéder à l'eshop depuis leur nouvelle région! +Après ce processus, **vous ne pourrez plus accéder à l'eShop**. Ceci inclut toutes les fonctionnalités qui utilisent un NNID, telles que les mises à jour de jeu, l'achat de DLC ou le multijoueur en ligne dans certains jeux. Le changement de région vers votre région d'origine ne résoudra généralement pas ce problème. {: .notice--warning} Notez que parfois, pour une raison inconnue, l'eshop ne fonctionnera pas même sur une console sur laquelle il devrait. Ceci est entièrement dû aux serveurs de Nintendo, et je n'ai aucun contrôle dessus. Similaire à l’avertissement ci-dessus, notez que parfois l’eShop marchera inexplicablement sur les consoles qui ne devrait pas (par exemple, certaines New 3DS). La cause est actuellement inconnue. @@ -55,12 +55,34 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Copiez `FBI.3dsx` dans le dossier `/3ds/` de votre carte SD 1. Réinsérez votre carte SD dans votre 3DS -#### Section II - CTRTransfer - +#### Section II - Sauvegarde de la NAND 1. Ouvrez Godmode9 en maintenant (Start) au démarrage 1. Si vous êtes invité à créer une sauvegarde de fichiers essentiels, appuyez sur (A) pour le faire, puis appuyez sur (A) pour continuer une fois qu’elle a complété 1. Si vous êtes invité à régler la date et l'heure du RTC, appuyez sur (A) pour le faire, puis réglez la date et l'heure, puis appuyez sur (A) pour continuer Notez que, si vous avez dû régler la date et l'heure du RTC, vous devrez également régler l'heure dans les Paramètres du système après ce guide +1. Appuyez sur (Home) pour faire apparaître le menu d’actions (action menu) +1. Sélectionnez "Scripts" +1. Sélectionnez "GM9Megascript" +1. Sélectionnez "Backup Options" +1. Sélectionnez "SysNAND Backup" +1. Appuyez sur (A) pour confirmer + + Ce processus prendra un certain temps + + Si une erreur apparaît, vérifiez que vous avez au moins 1,3 Go d'espace libre sur votre carte SD +1. Appuyez sur (A) pour continuer +1. Appuyez sur (B) pour revenir au menu principal +1. Sélectionnez "Exit" +1. Appuyez (A) pour reverrouiller autorisations en écriture si vous êtes invité +1. Maintenez (R) et appuyez sur (B) en même temps pour éjecter votre carte SD +1. Insérez votre carte SD dans votre ordinateur +1. Copiez `__sysnand_###.bin` et `essential.exefs` du dossier `/gm9/out/`de votre carte SD vers un emplacement sûr de votre ordinateur + + Faites des sauvegardes dans plusieurs endroits (tels que des stockages de fichiers en ligne par exemple) + Ces sauvegardes vous sauveront d'un brick et/ou vous aideront à récupérer des fichiers de l'image de la NAND si quelque chose se passe mal plus tard +1. Supprimez `__sysnand_###.bin` et `__sysnand_###.bin.sha` du dossier `/gm9/out/` de votre carte SD après l'avoir copiée +1. Réinsérez votre carte SD dans votre 3DS + + Si votre carte SD n'a pas été détectée, maintenez (R) et appuyez sur (B) pour la remonter + +#### Section III - CTRTransfer + 1. Naviguez vers `[0:] SDCARD` -> `gm9` 1. Appuyez sur (A) sur le `.bin` de CTRTransfer pour le sélectionner 1. Sélectionnez "CTRNAND options..." @@ -68,7 +90,7 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Si vous y êtes invité, sélectionnez "Transfer to SysNAND" + Cette invitation s’affiche uniquement si vous avez une EmuNAND 1. Appuyez sur (A) pour autoriser l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée - + Ce processus prendra un certain temps + + Ce processus pendra du temps 1. Une fois le transfert terminé, appuyez sur (A) pour continuer 1. Appuyez sur (B) pour décliner le verrouillage des autorisations en écriture si vous y êtes invité 1. Appuyez deux fois sur (B) pour revenir au menu principal @@ -87,7 +109,7 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. + Mettre à jour tout en ayant B9S + Luma (ce que vous avez) est sans danger + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique" -#### Section III - Lancez FBI +#### Section IV - Lancement de FBI 1. Lancez l'application Mode téléchargement (cette [icône]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Appuyez simultanément sur (L) + (Bas) + (Select) pour ouvrir le menu Rosalina @@ -100,7 +122,7 @@ Vous DEVEZ avoir déjà installé Luma3DS et boot9strap pour utiliser ceci. 1. Lancez l’application Mode téléchargement 1. Votre console devrait maintenant charger le Homebrew Launcher -#### Section IV - Réinstallation des Tickets +#### Section V - Réinstallation des Tickets Si le script trouvé qu'aucun ticket utilisateur vous pouvez sautez cette section {: .notice--info} @@ -120,14 +142,14 @@ Si le script trouvé qu'aucun ticket utilisateur vous pouvez sautez cette sectio + Appuyez sur (B) pour refuser l'installation des tickets depuis le CDN. 1. Appuyez sur (Home) pour quitter FBI -#### Section V - Paramètres de région +#### Section VI - Paramètres de région 1. Ouvrez les Paramètres de la console 1. Allez dans "Autres paramètres", "Profil", puis "Région" 1. Sélectionnez un pays dans la région que vous venez de paramétrer 1. Vous n'avez pas besoin de choisir un État si on vous le demande -#### Section VI - Suppression de l'image CTRTransfer +#### Section VII - Suppression de l'image de CTRTransfer 1. Ouvrez Godmode9 en maintenant (Start) au démarrage 1. Naviguez vers `[0:] SDCARD` -> `gm9` diff --git a/_pages/fr_FR/restoring-cfw.txt b/_pages/fr_FR/restoring-cfw.txt new file mode 100644 index 0000000000..3153a72101 --- /dev/null +++ b/_pages/fr_FR/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restauration du CFW" +--- + +{% include toc title="Table des matières" %} + +### Lecture requise + +Cette page prépare les consoles avec une installation de boot9strap existante pour la réinstallation d'applications de custom firmware. Elle peut également être utilisée en cas de perte ou de corruption de la carte SD. + +## Ce dont vous avez besoin +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Préparatifs + +1. Insérez votre carte SD dans votre ordinateur +1. Copiez `boot.3dsx` et `boot.firm` depuis le fichier `.zip` de Luma3DS vers la racine de votre carte SD + + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier +1. Réinsérez votre carte SD dans votre 3DS + +#### Section II - Configuration de Luma3DS + +1. Allumez votre console + * Vous devriez maintenant voir le menu de configuration de Luma3DS +1. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants: + * **"Show NAND or user string in System Settings"** +1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + +___ + +### Continuer vers [Finalisation de l'installation](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/fr_FR/seedminer.txt b/_pages/fr_FR/seedminer.txt index d03062c9a6..fb1468e43d 100644 --- a/_pages/fr_FR/seedminer.txt +++ b/_pages/fr_FR/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table des matières" %} +Les méthodes basées sur Seedminer ont été remplacées par des méthodes plus simples et plus sûres. Veuillez retourner à [Bien Démarrer](get-started) à moins que vous n'ayez une raison légitime de suivre cette page (si vos boutons L et R sont cassés). +{: .notice--warning} + ### Lecture requise -Pour installer boot9strap sur votre console, nous exploitons un oubli dans les restrictions de sécurité appliquées aux applications "DSiWare". +Pour installer boot9strap sur votre 3DS, nous dérivons la clé de chiffrement unique de votre console. Pour exploiter cette faille, nous utilisons un outil appelé Seedminer pour calculer la clé de chiffrement DSiWare (`movable.sed`) pour votre appareil. Nous utilisons alors cette clé de chiffrement DSiWare pour déchiffrer une application DSiWare compatible et injecter un exploit pour exécuter notre propre code (l'exploit exact utilisé dépendra de la région de votre appareil). @@ -16,21 +19,7 @@ Cette méthode utilise une carte graphique puissante pour effectuer les calculs ### Instructions -#### Section I - Test de compatibilité - -Bien que ce test ne soit pas strictement nécessaire pour réaliser l'exploit Seedminer, les exploits suivants nécessitent l'exécution de ce test et cela serait une perte de temps et d'efforts de réaliser Seedminer sans la possibilité d'utiliser les autres exploits. - -Il y a plusieurs méthodes différentes qui se basent sur l'exploit Seedminer, donc même si ce test échoue, vous pouvez toujours utiliser une autre méthode. - -#### Test de Gestion des Nintendo DSiWare (utilisé pour unSAFE_MODE) - -1. Allez dans Paramètres de la console, puis "Gestion des données", puis "DSiWare" -1. Si votre console ne plante pas, le test a réussi - + Si la console plante et retourne au Menu HOME, le test a échoué et vous devrez utiliser une ancienne méthode en bas de cette page - + Si vous voyez un écran coloré avant que la console ne retourne au Menu HOME, rejoignez [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez (en anglais) à quelqu'un de vous aider -1. Retournez au Menu HOME - -#### Section II - Préparatifs +#### Section I - Préparatifs 1. Insérez votre carte SD dans votre ordinateur 1. Naviguez vers le dossier `Nintendo 3DS` de votre carte SD @@ -48,47 +37,47 @@ Il y a plusieurs méthodes différentes qui se basent sur l'exploit Seedminer, d 1. Collez le nom du dossier (qui fait 32 caractères de long) dans un document pour pouvoir le récupérer plus tard + Ce nom de dossier est aussi appelé votre "ID0" 1. Allumez à présent votre 3DS -1. Accédez à votre liste d’ami ([icône de visage orange] ({{"/images/friend-list-icon.png" | absolute_url}}) dans la rangée du haut de votre Menu HOME) - + Si vous obtenez un message d’erreur et êtes expulsé du menu, vous devrez soit créer un nouveau Mii, soit votre console ne peut pas se connecter aux serveurs de Nintendo (en raison d’un ban ou d'un problème de connexion) +1. Accédez à votre liste d’ami ([icône de visage orange]({{"/images/friend-list-icon.png" | absolute_url}}) dans la rangée du haut de votre Menu HOME) + + Si vous obtenez une erreur et que vous êtes renvoyé vers le Menu HOME, vous devez soit créer un nouveau Mii, soit votre console ne peut pas se connecter aux serveurs de Nintendo (en raison d'un bannissement ou de problèmes de connexion) 1. Trouvez le profil de votre Mii, puis trouvez le champ "Code ami" sur l'écran supérieur -#### Section III - Seedminer +#### Section II - Seedminer 1. Ouvrez [Bruteforce Movable](https://seedminer.hacks.guide/) sur votre ordinateur + Ce site peut automatiser la récupération du fichier `movable_part1.sed` (en utilisant une console 3DS bot) et le cassage du chiffrement DSiWare de votre console (en utilisant l'ordinateur d'un volontaire pour exécuter Seedminer) - + Si ce site n'est pas fonctionnel, essayez d'utiliser [celui-ci](https://bfm.nintendohomebrew.com/) - + Si ces deux sites ne fonctionnent pas, veuillez rejoindre [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez (en anglais) que quelqu'un vous aide + + Si le site ne fonctionne pas, veuillez rejoindre [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez (en anglais) que quelqu'un vous aide 1. Entrez le code ami de votre console (sans espaces ni tirets) dans le champ "Your friend code" 1. Collez le nom du dossier de votre console (qui fait 32 caractères de long) dans le champ "Your ID0" + N'essayez pas de saisir l'ID0 à la main. Assurez-vous que l'ID0 est correctement saisi en le copiant et en le collant à partir de l'endroit où vous l'avez sauvegardé dans la section précédente 1. Sélectionnez "Go" - + Si le site va immédiatement à l'étape 4, téléchargez votre fichier `movable.sed` et continuez vers la section suivante. + + Si le site passe immédiatement à l'étape 4, téléchargez votre fichier `movable.sed` et continuez vers la section suivante 1. Lorsque demandé, utilisez le bouton "Ajouter un ami" sur votre console pour ajouter le code ami de la 3DS bot 1. Attendez que le site se mette à jour + Si ce n'est pas le cas, patientez quelques minutes avant de rafraîchir la page 1. Une fois que le site aura traité vos informations, vous aurez le choix entre "Continuer" ou "Refaire le processus pour un autre appareil". Cliquez le bouton vert "Continuer" 1. Veuillez attendre que le reste du processus soit achevé - + Ceci est généralement rapide (entre 1-5 minutes) mais dans certains cas, cela peut prendre jusqu'à une demi-heure. - + Durant ce processus, le bot que vous avez ajouté peut ne pas apparaître sur votre 3DS. Tant que le site se met à jour, cela n'est pas un problème. + + Ceci est généralement rapide (entre 1-5 minutes) mais dans certains cas, cela peut prendre jusqu'à une demi-heure + + Au cours de ce processus, le bot que vous avez ajouté peut ne pas apparaître sur votre 3DS. Tant que le site se met à jour, ce n'est pas un problème + Si vous êtes toujours en train d'attendre après une demi-heure, veuillez rejoindre [Nintendo Homebrew sur Discord](https://discord.gg/MWxPgEp) et demandez (en anglais) à quelqu'un de vous aider 1. Une fois le processus terminé, téléchargez votre fichier `movable.sed` depuis le site + Gardez ce fichier car vous en aurez besoin dans les pages à venir ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommandé) -Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour tirer parti des exploits du firmware SAFE_MODE présent sur toutes les consoles 3DS. +Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour écrire un fichier de sauvegarde modifié pour Pokémon Picross, qui peut ensuite être utilisé avec universal-otherapp pour installer le custom firmware. -Cette méthode est compatible avec toutes les régions, sauf la région CHN, qui n'est pas couverte par ce guide. +Cette méthode requiert l'application Pokémon Picross (gratuit sur eShop), et nécessite donc un accès à l'eShop et une 3DS avec une région USA, EUR, ou JPN. -Continuer vers [Installation de boot9strap (USM)](installing-boot9strap-(usm)) +Continuer vers [Installation de boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Anciennes Méthodes +Cette méthode d'utilisation de Seedminer pour une exploitation plus poussée utilise votre fichier `movable.sed` pour créer une sauvegarde DSiWare modifiée qui exploite le système pour dumper un DSiWare système. -Ces méthodes sont désuètes et ne sont pas recommandées, sauf indication contraire. +Cette méthode n'est recommandée que si vous n'êtes pas en mesure de suivre la méthode PicHaxx + universal-otherapp. -[Anciennes Méthodes](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/fr_FR/site-navigation.txt b/_pages/fr_FR/site-navigation.txt index bccc4a1851..b7e2ec8d51 100644 --- a/_pages/fr_FR/site-navigation.txt +++ b/_pages/fr_FR/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Populaire** + [Finalisation de l'installation](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installation de boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installation de boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installation de boot9strap (Navigateur Internet)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installation de boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Mise à jour par cartouche](cart-update) + [Crédits](credits) ++ [Vérification de la présence d'un CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Dons](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flasher ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flasher ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flasher ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatage de la carte SD (Linux)](formatting-sd-(linux)) ++ [Formatage de la carte SD (Mac)](formatting-sd-(mac)) ++ [Formatage de la carte SD (Windows)](formatting-sd-(windows)) + [Bien démarrer](get-started) ++ [Bien démarrer (New 3DS)](get-started-(new-3ds)) ++ [Bien démarrer (Old 3DS)](get-started-(old-3ds)) + [Utilisation de GodMode9](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/fr_FR/) + [Homebrew Launcher (Méthodes Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installation de boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installation de boot9strap (Browser)](installing-boot9strap-(browser)) + [Installation de boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installation de boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installation de boot9strap (MSET)](installing-boot9strap-(mset)) + [Installation de boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installation de boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installation de boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installation de boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installation de boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installation de boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installation de boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installation de boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installation de boot9strap (USM)](installing-boot9strap-(usm)) + [Transférer une EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Changement de Région](region-changing) ++ [Restauration du CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Anciennes Méthodes de Seedminer](legacy-methods) + [Dépannage](troubleshooting) + [Désinstallation du CFW](uninstall-cfw) + [Mettre à jour B9S](updating-b9s) diff --git a/_pages/fr_FR/updating-b9s.txt b/_pages/fr_FR/updating-b9s.txt index 56a9ce99ed..c5bf4b4e9d 100644 --- a/_pages/fr_FR/updating-b9s.txt +++ b/_pages/fr_FR/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Mettre à jour B9S" Cette page s'adresse aux utilisateurs de boot9strap déjà présent sur leurs console afin de le mettre à jour vers la dernière version. -{% capture notice-1 %} -Il y a eu des informations concernant une vague de bannissements contre les utilisateurs de CFW par Nintendo. Pour vous protéger, merci de bien faire les étapes suivantes avant de commencer ce guide: - -1. Allez dans les paramètres de la console, puis dans les "Paramètres Internet", puis dans "SpotPass" puis "Envoi d'informations système" -1. Désactiver l'option "Envoyer des informations système" -1. Sortez des paramètres système -1. Accédez à votre liste d’ami ([icône de visage orange] ({{"/images/friend-list-icon.png" | absolute_url}}) dans la rangée du haut de votre Menu HOME) - + Si vous obtenez un message d’erreur et êtes sorti du menu de force, soit la liste d’ami est déjà désactivée soit votre console ne peut pas se connecter aux serveurs de Nintendo (en raison d’un ban ou un problème de connexion) -1. Allez dans les paramètres de la liste d’ami, puis "Notification à vos amis", puis "Afficher le titre du logiciel que vous utilisez" -1. Désactivez l'option "Afficher le titre du logiciel que vous utilisez" -1. Sortez votre Liste d’amis - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Bien que nous pensons que le custom firmware est sûr pour un utilisation en ligne, des cas de bannissements ont été rapportés dans le passé, principalement à cause de tricherie en ligne ou d'un comportement suspect de l'eShop. +{: .notice--warning} ## Ce dont vous avez besoin * La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, ni le fichier `devkit`, ni le fichier `ntr`)* -* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La dernière version de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)* +* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants {: .notice--info} 1. Insérez votre carte SD dans votre ordinateur -1. Copiez `boot.3dsx` à la racine de votre carte SD 1. Créez un dossier à la racine de votre carte SD nommé `boot9strap` 1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD 1. Copiez `SafeB9SInstaller.firm` du dossier SafeB9SInstaller `.zip` vers le dossier `/luma/payloads/` de votre carte SD @@ -58,7 +43,7 @@ Pour toutes les étapes de cette section, remplacez tous les fichiers existants 1. Éteignez votre 3DS 1. Insérez votre carte SD dans votre ordinateur -1. Copiez le fichier `boot.firm` du fichier `.zip` de Luma3DS vers la racine de votre carte SD, en écrasant le fichier existant si nécessaire +1. Copiez les fichiers `boot.firm` et `boot.3dsx` depuis le fichier `.zip` de Luma3DS vers la racine de votre carte SD, en écrasant le fichier existant si nécessaire 1. Réinsérez votre carte SD dans votre 3DS 1. Allumez à présent votre 3DS diff --git a/_pages/he_IL/a9lh-to-b9s.txt b/_pages/he_IL/a9lh-to-b9s.txt index 70d37b4812..1b495d6cfd 100644 --- a/_pages/he_IL/a9lh-to-b9s.txt +++ b/_pages/he_IL/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -אם יש לכם קוד בLuma3DS, אז SafeB9SInstaller יביא לכם שגיאת "OTP Crypto Fail" אלא אם כן אתם מבטלים זמנית את הקוד (אתם יכולים להפעיל אותו מחדש אחרי העדכון). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -היו דיווחים על גל של באנים שנינטנדו נתנו למי שפרץ. כדי להגן על עצמכם, תעשו את השלבים הבאים לפני שאתם מתחילים את המדריך: - -1. לכו להגדרות, שם אל "Internet Settings", שם "SpotPass", ולבסוף אל "Sending of System Information" -1. תבטלו את הגדרת "Sending of System Information" -1. תצאו מהגדרות המערכת -1. לכו לרשימת החברים שלכם(ה[פרצוף הכתום]({{ "/images/friend-list-icon.png" | absolute_url }})בשורה העליונה של מסך הבית) - +אם אתם מקבלים שגיאה ונבעטים מהתפריט, הגדרת רשימת החברים או מבוטלת או שהקונסולה לא יכולה להתחבר לשרתים של נינטנדו (בגלל באן או בעיות בחיבור) -1. לכו להגדרות רשימת החברים, שם אל "Friend Notification Settings", ולבסוף אל "Show friends what you're playing" -1. תבטלו את האפשרות "Show friends what you're playing" -1. תצאו מרשימת החברים - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need שימו לב שהקובץ הדרוש הנקרא `secret_sector.bin` הוא אותו אחד שנמצא בכל הגרסאות של הקובץ `data_input.zip`. אם יש לכם את הקובץ הזה איפושהו, אתם יכולים להשתמש בו במקום להוריד את האחד למטה. @@ -42,11 +26,10 @@ To extract the `.7z` files linked on this page, you will need a file archiver li {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### הנחיות @@ -57,8 +40,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. תעתיקו את `boot.3dsx` אל שורש כרטיס ה SD -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. תמחקו כל קובץ `.bin` בתיקיית `/luma/payloads/`על כרטיס הSD שלכם כי הם לא יהיו תואמים בגרסאות של Luma3DS שתואמות עם boot9strap 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/he_IL/bannerbomb3.txt b/_pages/he_IL/bannerbomb3.txt index 9e3de1f388..71e0a24fb0 100644 --- a/_pages/he_IL/bannerbomb3.txt +++ b/_pages/he_IL/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="תוכן העניינים" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### קריאה דרושה To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/he_IL/checking-for-cfw.txt b/_pages/he_IL/checking-for-cfw.txt new file mode 100644 index 0000000000..ccb1099d49 --- /dev/null +++ b/_pages/he_IL/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### הנחיות + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/he_IL/credits.txt b/_pages/he_IL/credits.txt index 413171110d..51c0e34507 100644 --- a/_pages/he_IL/credits.txt +++ b/_pages/he_IL/credits.txt @@ -2,6 +2,9 @@ title: "תודות" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **תודות מיוחדות לכל [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) על היותכם מדהימים!** {: .notice--primary} @@ -22,7 +25,7 @@ title: "תודות" + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ title: "תודות" + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ title: "תודות" + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/he_IL/dsidumper.txt b/_pages/he_IL/dsidumper.txt index 2dc5e57f11..9762798a6c 100644 --- a/_pages/he_IL/dsidumper.txt +++ b/_pages/he_IL/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="תוכן העניינים" %} - -### קריאה דרושה - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### חלק I - הכנות - -1. תכבו את המכשיר -1. תכניסו את ה-SD שלכם למחשב -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם -1. תפעילו את המכשיר - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/he_IL/faq.txt b/_pages/he_IL/faq.txt index 73e73edcba..be73a954a6 100644 --- a/_pages/he_IL/faq.txt +++ b/_pages/he_IL/faq.txt @@ -6,7 +6,7 @@ title: "שאלות ותשובות" **תשובה:** כן **שאלה:** * איך אני מעדכן את Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **שאלה:** *אני שמעתי על משהו שאני צריך לקנות(Gateway, Sky3DS, וכו'). זה משהו שאני צריך?* **תשובה:** לא. boot9strap היא שיטה יותר טובה של טעינת פריצה שעובדת מוקדם באתחול. diff --git a/_pages/he_IL/finalizing-setup.txt b/_pages/he_IL/finalizing-setup.txt index 699cc3bb50..c2457910e4 100644 --- a/_pages/he_IL/finalizing-setup.txt +++ b/_pages/he_IL/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "סיום התהליך" הקובץ `boot.firm` הוא מה שמופעל בעת ההדלקה של המכשיר על ידי boot9strap עצמו לאחר שהוא נטען מה-NAND, והוא כל payload של arm9 בפורמט של הFIRM. את הקובץ עצמו אפשר להחליף תמיד, למרות שLuma3DS מאפשר הרצת payload של arm9 בפורמט הFIRM באמצעות הטעינת שרשרת של Luma3DS. -לכן, נשתמש ב-Luma3DS מאת [AuroraWright](https://github.com/AuroraWright/) על מנת לעשות בוט לתוך SysNAND מותאם ישירות, דבר אשר מאפשר לנו לעקוף לחלוטין כל צורך של EmuNAND ובכך לפשט את השימוש ב-3DS פרוץ במקביל לחסכון בנפח ה-SD. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. בתהליך זה, גם נתקין את התוכנות הבאות: + **FBI** *(התקנת משחקים ותוכנות בפורמט CIA)* + **Anemone3DS** *(מתקין ערכות נושא מותאמות אישית)* + **Checkpoint** *(מגבה ומשחזר שמירות למשחקי 3DS וDS)* -+ **Luma3DS Updater** *(עדכון לCFW בקלות)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(כלי רב שימושי אשר מסוגל לבצע פונקציות הקשורות ל-NAND ולקלטות משחק)* + **Homebrew Launcher Loader** *(מפעיל את הHomebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ title: "סיום התהליך" * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### הנחיות @@ -39,15 +39,16 @@ title: "סיום התהליך" 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. צרו תיקייה בשם `cias` בתיקיית האם של כרטיס ה- SD שלכם אם לא קיימת תיקייה כזו 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. תעתיקו את 'FBI.3dsx' לתיקיה '/ 3ds /' על כרטיס הזכרון 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. תעתיקו את הקובץ `lumaupdater.cia` לתוך התיקייה `/cias/` שב-SD שלכם 1. תעתיקו את הקובץ `FBI.cia` לתוך התיקייה `/cias/` שב-SD שלכם 1. תעתיקו את הקובץ `DSP1.cia` לתוך התיקייה `/cias/` שב-SD שלכם 1. תעתיקו את הקובץ `Anemone3DS.cia` לתוך התיקייה `/cias/` שב-SD שלכם 1. תעתיקו את הקובץ `Checkpoint.cia` לתוך התיקייה `/cias/` שב-SD שלכם +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. צרו תיקייה בשם `payloads` בתיקיית `luma` של כרטיס ה- SD שלכם אם לא קיימת תיקייה כזו 1. העתיקו את `GodMode9.firm` מהזיפ של GodMode9 אל תיקיית /luma/payloads/ ב- SD שלכם 1. תעתיקו את התיקייה `gm9` מתוך ה`.zip` של GodMode9 ל-SD שלכם @@ -102,7 +103,7 @@ If, while following a previous version of this guide, you CTRTransfered your *Ne #### חלק VI - Luma3DS על ה- CTRNAND 1. תכבו את המכשיר -1. תפתחו את GodMode9 על ידי החזקה של המקש (Start) בעת ההדלקה +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. אם תתבקשו לעשות גיבוי של קבצים חיוניים, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך אחרי שזה סיים 1. אם אתם מתבקשים לתקן את זמן ותאריך הRTC, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך 1. תלחצו על (Home) כדי להראות את תפריט הפעולה @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -אתם כעת יכולים להשתמש ב-Luma3DS Updater על מנת לעדכן את Luma3DS המותקן לקונסולה שלכם בכך שפשוט תפתחו אותו ולחצו על (A). - -זה לא אותו דבר כמו עדכון מערכת; זה רק מוריד ומחלץ את הקבצים העדכניים של Luma3DS. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -אתם עכשיו תפעילו את Luma3DS CFW כברירת מחדל. +You will now boot Luma3DS CFW by default. אתם יכולים להחזיק את (Select) בזמן הדלקה על מנת להפעיל את תפריט ההגדרות של Luma3DS. @@ -177,7 +168,7 @@ This will update the Luma3DS files on your SD card and in CTRNAND, which is what {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ If your new SD card is bigger than 32GB, then you have to use a different tool t על מנת לקבל מידע על שימוש ב-Luma3DS ובפונקציות השונות שלו, עברו [לעמוד הויקי שלו](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -לקבלת מידע אודות התקנת ערכות נושא מותאמות אישית ומסכי פתיחה, תלכו אל [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/he_IL/flashing-ntrboot-(3ds-multi-system).txt b/_pages/he_IL/flashing-ntrboot-(3ds-multi-system).txt index 9d48f1bf08..52cea15469 100644 --- a/_pages/he_IL/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/he_IL/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ title: "צריבת ntrboot (שתי מערכות 3DS)" + שתי קונסולות ממשפחת ה3DS + **3DS המקור**: הקונסולה ממשפחת ה3DS שכבר מריצה את boot9strap + **3DS היעד**: הקונסולה על הקושחה המקורית -* הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap של `ntr`; לא קובץ ה `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### הנחיות diff --git a/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt b/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt index 804b889d1e..ede0688391 100644 --- a/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ title: "צריבת ntrboot (מערכת 3DS אחת)" ### What You Need * כרטיס הפריצה שתומך בntrboot שלכם -* הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap של `ntr`; לא קובץ ה `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### הנחיות diff --git a/_pages/he_IL/flashing-ntrboot-(nds).txt b/_pages/he_IL/flashing-ntrboot-(nds).txt index 1f8f580e22..80146943d1 100644 --- a/_pages/he_IL/flashing-ntrboot-(nds).txt +++ b/_pages/he_IL/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ title: "צריבת ntrboot (NDS)" * שתי קונסולות + **NDS / NDSL המקור**: הNintendo DS או Nintendo DS Lite שנתמך על ידי הכרטיס פריצה שלכם + **3DS היעד**: הקונסולה ממשפחת ה3DS על הקושחה המקורית -* הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap של `ntr`; לא קובץ ה `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### הנחיות diff --git a/_pages/he_IL/formatting-sd-(linux).txt b/_pages/he_IL/formatting-sd-(linux).txt new file mode 100644 index 0000000000..6c8c08dad0 --- /dev/null +++ b/_pages/he_IL/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +עמוד זה נועד רק עבור משתמשי לינוקס. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### הנחיות +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/he_IL/formatting-sd-(mac).txt b/_pages/he_IL/formatting-sd-(mac).txt new file mode 100644 index 0000000000..7e9898dc9d --- /dev/null +++ b/_pages/he_IL/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +עמוד זה נועד רק עבור משתמשי Mac. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### הנחיות + +#### OS X El Capitan (10.11) and later + +1. תכניסו את ה-SD שלכם למחשב +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. תכניסו את ה-SD שלכם למחשב +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/he_IL/formatting-sd-(windows).txt b/_pages/he_IL/formatting-sd-(windows).txt new file mode 100644 index 0000000000..e3a6089330 --- /dev/null +++ b/_pages/he_IL/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +הדף הזה הוא למשתמשי Windows בלבד. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### הנחיות + +1. תכניסו את ה-SD שלכם למחשב +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/he_IL/get-started-(new-3ds).txt b/_pages/he_IL/get-started-(new-3ds).txt index 81d2747495..8e384ad50f 100644 --- a/_pages/he_IL/get-started-(new-3ds).txt +++ b/_pages/he_IL/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "צעדים ראשונים (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="תוכן העניינים" %} ### קריאה דרושה -תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0. - -בהוסף, שימו לב שהמספר האחרון של גירסת הקונסולה (אשר לפניו מקף) מתייחס לגירסת הדפדפן שלכם. כרגע, גירסת הדפדפן לא רלוונטית בשביל New 3DS במדריך הזה. - -**אם אתם לא יכולים לעקוב אחרי ההוראות שמתאימות לגרסא הספיציפית שלכם בכלל שאין לכם את התנאים המקדימים, אתם צריכים להסתכל על עמוד "כל הגרסאות" לדרכים שלא קשורות לגרסת מערכת ספיציפית.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. ניתן למצוא את גירסת המכשיר ואיזורו בפינה הימנית התחתונה של המסך העליון בהגדרות. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### טבלת גרסאות - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
מעדמ עדAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0תשתמשו בשיטת "כל הגרסאות"11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0התקנת boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
כל הגרסאות

ntrboot
(דורש כרטיס פריצה תואם)

or

התקנת boot9strap (Hardmod)
(דורש הלחמה)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/he_IL/get-started-(old-3ds).txt b/_pages/he_IL/get-started-(old-3ds).txt index 80b4f7c55e..fe26a2e792 100644 --- a/_pages/he_IL/get-started-(old-3ds).txt +++ b/_pages/he_IL/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "צעדים ראשונים (Old 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="תוכן העניינים" %} ### קריאה דרושה -תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0. - -בנוסף, שימו לב ששתי העמודות האחרונות של התרשים מתייחסות לספרה האחרונה במספר הגירסה שלכם (שתואמת לגירסת הדפדפן שמותקן על המערכת). אם הגירסה היא 0 אז אין לכם דפדפן, בעוד שכל מספר אחר אומר שיש דפדפן מותקן. - -במקרה של "5.0.0-0U" למשל, אתם צריכים לעקוב אחרי העמודה "ללא דפדפן" והשורה מ 5.0.0 עד 5.1.0 כי הקונסולה היא על גרסה בטווח הזה ואין לה דפדפן מותקן. - -**אם אתם לא יכולים לעקוב אחרי ההוראות שמתאימות לגרסא הספיציפית שלכם בכלל שאין לכם את התנאים המקדימים, אתם צריכים להסתכל על עמוד "כל הגרסאות" לדרכים שלא קשורות לגרסת מערכת ספיציפית.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. ניתן למצוא את גירסת המכשיר ואיזורו בפינה הימנית התחתונה של המסך העליון בהגדרות. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### טבלת גרסאות @@ -33,49 +28,23 @@ For all versions you can also [Cartridge Update](cart-update) (or use a standard - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
מ עד ללא דפדפן עם דפדפןAction
1.0.02.0.0תשתמשו בשיטת "כל הגרסאות"
2.1.02.1.0תשתמשו בשיטת "כל הגרסאות"Installing boot9strap (2xrsa)
2.2.02.2.0תשתמשו בשיטת "כל הגרסאות"
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0תשתמשו בשיטת "כל הגרסאות"Installing boot9strap (Soundhax)
11.8.011.8.0התקנת boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
כל הגרסאות

ntrboot
(דורש כרטיס פריצה תואם)

or

התקנת boot9strap (Hardmod)
(דורש הלחמה)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/he_IL/get-started.txt b/_pages/he_IL/get-started.txt index 2827cb5669..7af3b63d10 100644 --- a/_pages/he_IL/get-started.txt +++ b/_pages/he_IL/get-started.txt @@ -6,85 +6,16 @@ title: "צעדים ראשונים" ### קריאה דרושה -תבחרו את הדף המתאים עבור הגירסה שלכם מהתרשים שלמטה. שימו לב שכאשר נכתב "עד" מדובר בעד ועד בכלל. זה אומר, לדוגמה, שהשורה "מ 9.0.0 עד 9.2.0" כוללת את 9.0.0, 9.1.0 ואת 9.2.0. - -ניתן למצוא את גירסת המכשיר ואיזורו בפינה הימנית התחתונה של המסך העליון בהגדרות. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -אם ה3DS שלכם פרוץ כבר עם EmuNAND, פשוט תעשו את הוראות בזמן שאתם בSysNAND. תחליפו כל קובץ שכבר קיים. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -עמוד זה הוא בשביל הוראות על איך להתקין את boot9strap אל 3DS או 2DS *לא פרוץ*. אם יש לכם כבר את arm9loaderhax מותקן ואתם רוצים לעדכן לboot9strap, תעקבו אחרי [A9LH אל B9S](a9lh-to-b9s). -{: .notice--primary} - -לפני שמתחילים, משתמשי Windows צריכים להפעיל את האפשרות להצגת סיומות קבצים באמצעות [סיומות קבצים (Windows)](file-extensions-(windows))! -{: .notice--info} - -לפני שאתם מתחילים, כדאי לבדוק את כרטיס הזכרון עבור שגיאות באמצעות [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), או [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### טבלת גרסאות - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
מ עדAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
כל הגרסאות

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/he_IL/godmode9-usage.txt b/_pages/he_IL/godmode9-usage.txt index 88a4b31d44..02420139d0 100644 --- a/_pages/he_IL/godmode9-usage.txt +++ b/_pages/he_IL/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "שימוש בGodMode9" {% include toc title="תוכן העניינים" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### קריאה דרושה diff --git a/_pages/he_IL/home.txt b/_pages/he_IL/home.txt index 0e707918c0..c512898ea7 100644 --- a/_pages/he_IL/home.txt +++ b/_pages/he_IL/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## מה אני יכול לעשות עם קושחה מותאמת אישית? + לשחק כל את כל המשחקים הפיזים ומה- eShop, ללא קשר לאזור המכשיר -+ התאמה אישית של תפריט הבית עם [ערכות נושא ומסכי עלייה](https://themeplaza.eu/) שהוכנו על ידי משתמשים ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + לשחק ב- "ROM hacks" עבור משחקים שיש לכם + לצלם מסך + גיבוי, עריכה, ושחזור של שמירות להרבה משחקים @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **לפני תחילת המדריך, אתם חייבים לדעת את הסיכונים של פריצת 3DS: בכל פעם שתשנו את המערכת שלכם, תמיד יש הפוטנציאל** לבריק בלתי הפיך. הם נדירים, אבל עדיין אפשרות לקבל אותם אז תקפידו לעקוב אחרי השלבים במדיוק.** + אם ה- 3DS שלכם כבר פרוץ עם Emunand ואתם רוצים להעביר את מה שיש עליו ל- Sysnand, עקבו אחרי כל ההוראות ולכו למקום המתאים כשאתם ב [סיום התהליך](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + אם הכול ילך לפי התוכנית, לא תאבדו נתונים ותסיימו עם כל מה שהתחלתם (משחקים, NNID, שמירות, ועוד). + תשמרו על המכשיר מחובר לחשמל וטעון לאורך כל התהליך כדי למנוע אובדן נתונים או נזק מכיבוי בלתי צפוי! + ה- SD שלכם צריך להיות [MBR, לא GPT](http://www.howtogeek.com/245610/) (כרטיס ה- SD שמגיע עם המכשיר יהיה MBR כברירת מחדל). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/he_IL/homebrew-launcher-(browserhax-2020).txt b/_pages/he_IL/homebrew-launcher-(browserhax-2020).txt index 57f07b2532..487f25a45c 100644 --- a/_pages/he_IL/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/he_IL/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="תוכן העניינים" %} - -### קריאה דרושה - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### הנחיות - -#### חלק I - הכנות - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/he_IL/homebrew-launcher-(pichaxx).txt b/_pages/he_IL/homebrew-launcher-(pichaxx).txt index e3a170461f..8e7b42c077 100644 --- a/_pages/he_IL/homebrew-launcher-(pichaxx).txt +++ b/_pages/he_IL/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="תוכן העניינים" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### קריאה דרושה This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### הנחיות @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. תעתיקו את `boot.3dsx` אל שורש כרטיס ה SD 1. תעתיקו את קובץ ה-Otherapp payload שהורדתם ל-SD שלכם ותשנו לו את השם ל-"otherapp.bin" (ללא מרכאות, ללא סיומת כפולה) - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. תכבו את המכשיר ___ diff --git a/_pages/he_IL/homebrew-launcher-(soundhax).txt b/_pages/he_IL/homebrew-launcher-(soundhax).txt index 0d061fa795..946d394eed 100644 --- a/_pages/he_IL/homebrew-launcher-(soundhax).txt +++ b/_pages/he_IL/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Soundhax (when combined with the Homebrew Launcher) is compatible with versions Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! אתם תצטרכו [method](homebrew-launcher-(alternatives)) דרך חלופית בשביל להכנס ל homebrew launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! אתם תצטרכו [method](homebrew-launcher-(alternatives)) דרך חלופית בשביל להכנס ל homebrew launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### הנחיות diff --git a/_pages/he_IL/homebrew-launcher-(steelhax).txt b/_pages/he_IL/homebrew-launcher-(steelhax).txt index 888d50aea9..65ec1b9a69 100644 --- a/_pages/he_IL/homebrew-launcher-(steelhax).txt +++ b/_pages/he_IL/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="תוכן העניינים" %} - -### קריאה דרושה - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### הנחיות - -#### חלק I - הכנות - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. תעתיקו את `boot.3dsx` אל שורש כרטיס ה SD -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. תכבו את המכשיר -1. תכניסו את ה-SD שלכם למחשב -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם -1. תפעילו את המכשיר -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/he_IL/installing-boot9strap-(browser).txt b/_pages/he_IL/installing-boot9strap-(browser).txt index bac7ab7dcc..35d1f05926 100644 --- a/_pages/he_IL/installing-boot9strap-(browser).txt +++ b/_pages/he_IL/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "התקנת boot9strap (דפדפן)" {% include toc title="תוכן העניינים" %} +### קריאה דרושה + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### הנחיות @@ -16,24 +24,21 @@ title: "התקנת boot9strap (דפדפן)" 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` -1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם -1. מתוך הזיפ של SafeB9SInstaller, תעתיקו את הקבצים SafeB9SInstaller.dat ו`Launcher.dat` ל-SD שלכם - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר #### חלק II - הפעלת SafeB9SInstaller -1. תפתחו את הדפדפן ולכו לאחד ה-Urlים הבאים במכשיר שלכם - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. תפעילו את המכשיר +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + אם אתם מקבלים שגיאה, [עקבו אחרי המדריך הבא](troubleshooting#a-browser-based-exploit-is-not-working) 1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller @@ -50,7 +55,6 @@ title: "התקנת boot9strap (דפדפן)" 1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות: + **"Show NAND or user string in System Settings"** 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש - + אם אתם מקבלים שגיאה, פשוט תמשיכו בעמוד הבא ___ diff --git a/_pages/he_IL/installing-boot9strap-(fredtool).txt b/_pages/he_IL/installing-boot9strap-(fredtool).txt index e5b9f7b93c..447f0e171b 100644 --- a/_pages/he_IL/installing-boot9strap-(fredtool).txt +++ b/_pages/he_IL/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="תוכן העניינים" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### קריאה דרושה This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This method of using Seedminer for further exploitation uses your `movable.sed` ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### חלק I - הכנות @@ -28,18 +31,18 @@ This method of using Seedminer for further exploitation uses your `movable.sed` #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר diff --git a/_pages/he_IL/installing-boot9strap-(frogtool).txt b/_pages/he_IL/installing-boot9strap-(frogtool).txt index 0895e109b8..5212b03b6e 100644 --- a/_pages/he_IL/installing-boot9strap-(frogtool).txt +++ b/_pages/he_IL/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="תוכן העניינים" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### קריאה דרושה We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### חלק I - הכנות 1. תכניסו את ה-SD שלכם למחשב 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. תבחרו ב "Miscellaneous options" +1. תבחרו ב "Switch the hb. title to the current app." +1. תלחצו (B) כדי להמשיך +1. תלחצו (B) כדי לחזור לתפריט הראשי של Rosalina +1. תלחצו (B) כדי לצאת מהתפריט של Rosalina +1. תלחצו על (Home), ואז תסגרו את Download Play +1. Relaunch the Download Play application +1. המכשיר שלכם אמור לטעון את הHomebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/he_IL/installing-boot9strap-(hardmod).txt b/_pages/he_IL/installing-boot9strap-(hardmod).txt index 2c8169823d..06c76fab45 100644 --- a/_pages/he_IL/installing-boot9strap-(hardmod).txt +++ b/_pages/he_IL/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + משתמשי Windows יכולים להשתמש ב`.exe` המקומפל, בעוד שמשתמשי Mac וLinux יצטרכו את [Python 3](https://www.python.org/downloads/) מותקן כדי להריץ את ה`.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * הקובץ`.firm` לפי הקונסולה והאזור: | גרסא(אות) | ליבה | Old 3DS או Old 2DS | New 3DS או New 2DS | diff --git a/_pages/he_IL/installing-boot9strap-(hbl-usm).txt b/_pages/he_IL/installing-boot9strap-(hbl-usm).txt index 36fee880eb..a42d09cecd 100644 --- a/_pages/he_IL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/he_IL/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="תוכן העניינים" %} - -### קריאה דרושה - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### חלק I - הכנות - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### חלק III - הגדרת Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות: - + **"Show NAND or user string in System Settings"** -1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. תפעילו את Download Play -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. תבחרו ב "Miscellaneous options" -1. תבחרו ב "Switch the hb. title to the current app." -1. תלחצו (B) כדי להמשיך -1. תלחצו (B) כדי לחזור לתפריט הראשי של Rosalina -1. תלחצו (B) כדי לצאת מהתפריט של Rosalina -1. תלחצו על (Home), ואז תסגרו את Download Play -1. Relaunch the Download Play application -1. המכשיר שלכם אמור לטעון את הHomebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt index 9268998cc9..5590adf30e 100644 --- a/_pages/he_IL/installing-boot9strap-(ntrboot).txt +++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * מגנט שמפעיל את מצב שינה בקונסולה שלכם (אם יש לכם קונסולה מתקפלת) * כרטיס הפריצה הצרוב שלכם * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### הנחיות #### חלק I - הכנות 1. תכבו את המכשיר -1. תכניסו את כרטיס ה- SD של המכשיר שלכם אל המחשב +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. תעתיקו את `SafeB9SInstaller.firm` אל שורש כרטיס ה SD שלכם ותשכתבו אותו אל `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` -1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם +1. Reinsert your SD card into your 3DS 1. תפעילו את המכשיר #### חלק II - ntrboot diff --git a/_pages/he_IL/installing-boot9strap-(pichaxx).txt b/_pages/he_IL/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..e5cab4c2f1 --- /dev/null +++ b/_pages/he_IL/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="תוכן העניינים" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### קריאה דרושה + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### הנחיות + +#### חלק I - הכנות + +1. תכבו את המכשיר +1. תכניסו את ה-SD שלכם למחשב +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` +1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם +1. תפעילו את המכשיר +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### חלק III - התקנת boot9strap + +1. תחכו שכל בדיקות הבטיחות יסתיימו +1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap +1. כשזה סיים, לחצו על (A) כדי לאתחל את הקונסולה + +#### חלק IV - הגדרת Luma3DS + +1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + אם אתם מקבלים מסך שחור, [תעקבו אחרי המדריך הזה](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות: + + **"Show NAND or user string in System Settings"** +1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + + אם אתם מקבלים שגיאה, פשוט תמשיכו בעמוד הבא + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/he_IL/installing-boot9strap-(safecerthax).txt b/_pages/he_IL/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..eb1ab7f14a --- /dev/null +++ b/_pages/he_IL/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### הנחיות + +#### חלק I - הכנות +1. תכבו את המכשיר +1. תכניסו את ה-SD שלכם למחשב +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם +1. תפעילו את המכשיר + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. תכבו את המכשיר + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. תחכו שכל בדיקות הבטיחות יסתיימו +1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap +1. כשזה סיים, לחצו על (A) כדי לאתחל את הקונסולה + +#### Section V - Configuring Luma3DS + +1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + אם אתם מקבלים מסך שחור, [תעקבו אחרי המדריך הזה](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות: + + **"Show NAND or user string in System Settings"** +1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. תכבו את המכשיר + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/he_IL/installing-boot9strap-(soundhax).txt b/_pages/he_IL/installing-boot9strap-(soundhax).txt index 99a5210401..9698162d19 100644 --- a/_pages/he_IL/installing-boot9strap-(soundhax).txt +++ b/_pages/he_IL/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### קריאה דרושה -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### הנחיות @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב 1. תעתיקו את קובץ האודיו עם סיומת "M4A" שמתאים לקונסולה שלכם ל-SD -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. תעתיקו את `boot.3dsx` אל שורש כרטיס ה SD +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + בסיטואציה הזאת, הפעלת SoundHax מיד תגרום לעצות אלה להופיע כל פעם שמפעילים את Nintendo 3DS Sound עד שעושים את זה 1. תעברו אל ' / SDCARD ", ואז תפעילו את" < 3 nedwill 2016 " + זה עלול לקחת הרבה נסיונות - + אם זה נקפא, כבו בכוח את המכשיר על-ידי החזקת כפתור ההדלקה ולאחר מכן נסו שוב + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/he_IL/installing-boot9strap-(ssloth-browser).txt b/_pages/he_IL/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..1845b4c504 --- /dev/null +++ b/_pages/he_IL/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### חלק I - הכנות + +1. תכבו את המכשיר +1. תכניסו את ה-SD שלכם למחשב +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם +1. תפעילו את המכשיר + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. תכבו את המכשיר + +#### Section III - Launching SafeB9SInstaller +1. תפעילו את המכשיר +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + אם אתם מקבלים שגיאה, [עקבו אחרי המדריך הבא](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. כעת אתם אמורים להיכנס לתוך SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. תחכו שכל בדיקות הבטיחות יסתיימו +1. כאשר תתבקשו, תלחצו על הכפתורים שנתונים לכם כדי להתקין את boot9strap +1. כשזה סיים, לחצו על (A) כדי לאתחל את הקונסולה + +#### Section V - Configuring Luma3DS + +1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS + + אם אתם מקבלים מסך שחור, [תעקבו אחרי המדריך הזה](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות: + + **"Show NAND or user string in System Settings"** +1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. תכבו את המכשיר + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/he_IL/installing-boot9strap-(usm).txt b/_pages/he_IL/installing-boot9strap-(usm).txt index 72b17dfa3a..391ccaee67 100644 --- a/_pages/he_IL/installing-boot9strap-(usm).txt +++ b/_pages/he_IL/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="תוכן העניינים" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### קריאה דרושה In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### חלק I - הכנות -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. תכניסו את ה-SD שלכם למחשב 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### חלק IV - הגדרת Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/he_IL/legacy-methods.txt b/_pages/he_IL/legacy-methods.txt index a0be4f4569..eb3fb0ec85 100644 --- a/_pages/he_IL/legacy-methods.txt +++ b/_pages/he_IL/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/he_IL/ntrboot.txt b/_pages/he_IL/ntrboot.txt index 8137ca3a29..ff2c54e93f 100644 --- a/_pages/he_IL/ntrboot.txt +++ b/_pages/he_IL/ntrboot.txt @@ -17,23 +17,23 @@ If your flashcart comes pre-flashed with ntrboot (or you have already flashed nt | שם הכרטיס | מחיר נוכחי | "פצצת זמן"? | גרסאות 3DS? | גירסאות DSi? | הערות אחרות | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/he_IL/region-changing.txt b/_pages/he_IL/region-changing.txt index fff7d73bb7..79296d9a3e 100644 --- a/_pages/he_IL/region-changing.txt +++ b/_pages/he_IL/region-changing.txt @@ -17,7 +17,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this תהליך זה ינתק את הNNID שלכם מהמערכת, כי הוא לא יהיה תואם איתה. NNID נעולים לאזור של המכשיר שבו יצרתם אותם ולא ניתן להעביר בין אזורים ללא [תהליך מתקדם ומסובך מאוד](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -אחרי תהליך זה, רק ** New 3DS אשר מעולם לא נכנס אל הeShop לפני ** ו ** כל Old 3DS ** יוכלו לגשת לeShop אחרי יצירת NNID חדש על האזור החדש שלהם. New 3DS שכבר נכנס לEshop על האזור המקורי שלהם לא יכולים ליצור NNID חדש באזור החדש ולהיכנס שם לEshop! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} שימו לב שלעתים הeShop עדיין לא יעבוד לקונסולות ששם הוא צריך לעבוד. זה לגמרי קשור בשרתים של נינטנדו ואין לי שליטה על זה. בנוסף, שימו לב שמידי פעם הeShop יעבוד באופן בלתי מוסבר עבור מכשירים שהוא לא אמור (לדוגמת הNew 3DS). הסיבה לכך היא כרגע לא ידועה. @@ -55,12 +55,34 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. תעתיקו את 'FBI.3dsx' לתיקיה '/ 3ds /' על כרטיס הזכרון 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם -#### חלק II - ביצוע CTRTransfer - +#### Section II - NAND Backup 1. תפתחו את GodMode9 על ידי החזקה של המקש (Start) בעת ההדלקה 1. אם תתבקשו לעשות גיבוי של קבצים חיוניים, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך אחרי שזה סיים 1. אם אתם מתבקשים לתקן את זמן ותאריך הRTC, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך + שימו לב, אם הייתם צריכים לתקן את תאריך וזמן הRTC, תצטרכו לתקן את הזמן בהגדרות המערכת גם כן אחרי המדריך הזה +1. תלחצו על (Home) כדי להראות את תפריט הפעולה +1. תבחרו "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. תלחצו (A) כדי לאשר + + זה ייקח קצת זמן + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. תלחצו (A) כדי להמשיך +1. תלחצו (B) כדי לחזור לתפריט הראשי +1. Select "Exit" +1. תלחצו (A) כדי לנעול הרשאות כתיבה אם תתבקשו +1. תחזיקו (R) ולחצו (B) באותו הזמן כדי להוציא את הSD +1. תכניסו את ה-SD שלכם למחשב +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + תיצרו גיבויים במקומות שונים (כמו אחסון בענן) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. נווטו אל `[0:] SDCARD` ושם אל `gm9` 1. תלחצו (A) על קובץ ה`.bin` של הCTRTransfer כדי לבחור בו 1. תבחרו ב "CTRNAND options..." @@ -87,7 +109,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + עדכונים שתבצעו תוך שימוש ב-B9S+Luma (במידה שיש לכם את שניהם) הם בטוחים לחלוטין + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto" -#### חלק III - הפעלת FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. תלחצו (L) + (Down) + (Select) באותו זמן כדי לפתוח את התפריט של Rosalina @@ -100,7 +122,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this 1. תפעילו את Download Play 1. המכשיר שלכם אמור לטעון את הHomebrew Launcher -#### חלק IV - התקנה מחדש של Ticketים +#### Section V - Reinstalling Tickets אם הסקריפט אמר לכם "No User Tickets Found" או משהו בסגנון אז תדלגו על החלק הזה {: .notice--info} @@ -120,14 +142,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this + תלחצו (B) כדי לדחות התקנת TICKETים מהCDN. 1. תלחצו על (Home) כדי לצאת מFBI -#### סעיף V - הגדרות אזור +#### Section VI - Region settings 1. פתחו את הגדרות המערכת 1. לכו ל Other settings, אז Profile, ולבסוף Region settings 1. תבחרו מדינה מהאזור שהחלפתם אליו 1. אם תתבקשו, אתם לא צריכים להגדיר אזור -#### חלק VI - מחיקת ה CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. תפתחו את GodMode9 על ידי החזקה של המקש (Start) בעת ההדלקה 1. נווטו אל `[0:] SDCARD` ושם אל `gm9` diff --git a/_pages/he_IL/restoring-cfw.txt b/_pages/he_IL/restoring-cfw.txt new file mode 100644 index 0000000000..55c4e5a7d9 --- /dev/null +++ b/_pages/he_IL/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="תוכן העניינים" %} + +### קריאה דרושה + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### הנחיות + +#### חלק I - הכנות + +1. תכניסו את ה-SD שלכם למחשב +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. השתמשו במקש (A) ובמקשי החיצים על מנת להפעיל את ההגדרות הבאות: + * **"Show NAND or user string in System Settings"** +1. לחצו על (Start) על מנת לשמור ולהפעיל מחדש + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/he_IL/seedminer.txt b/_pages/he_IL/seedminer.txt index 1e8102b6a6..d38b506ab0 100644 --- a/_pages/he_IL/seedminer.txt +++ b/_pages/he_IL/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="תוכן העניינים" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### קריאה דרושה -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### הנחיות -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### חלק I - הכנות 1. תכניסו את ה-SD שלכם למחשב 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. תפעילו את המכשיר 1. לכו לרשימת החברים שלכם(ה[פרצוף הכתום]({{ "/images/friend-list-icon.png" | absolute_url }})בשורה העליונה של מסך הבית) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/he_IL/site-navigation.txt b/_pages/he_IL/site-navigation.txt index 3aa368d186..3fd939f2af 100644 --- a/_pages/he_IL/site-navigation.txt +++ b/_pages/he_IL/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **פופולארי** + [סיום התהליך](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [תודות](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [תרומות](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [צריבת ntrboot (שתי מערכות 3DS)](flashing-ntrboot-(3ds-multi-system)) + [צריבת ntrboot (DSi)](flashing-ntrboot-(dsi)) + [צריבת ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [צעדים ראשונים](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [בית](/) + [Homebrew Launcher (אלטרנטיבות)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [התקנת boot9strap (דפדפן)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [התקנת boot9strap (הלחמה)](installing-boot9strap-(hardmod)) + [התקנת boot9strap (MSET)](installing-boot9strap-(mset)) + [התקנת boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [הזזת EmuNAND](move-emunand) + [ntrboot](ntrboot) + [שינוי אזור](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [פתרון בעיות](troubleshooting) + [הסרת CFW](uninstall-cfw) + [עדכון B9S](updating-b9s) diff --git a/_pages/he_IL/updating-b9s.txt b/_pages/he_IL/updating-b9s.txt index 43ba4c5c4f..fe5cac52be 100644 --- a/_pages/he_IL/updating-b9s.txt +++ b/_pages/he_IL/updating-b9s.txt @@ -8,28 +8,14 @@ title: "עדכון B9S" העמוד הזה קיים בשביל משתמשי boot9strap קיימים כדי לעדכן את ההתקנה שלהם לגרסה הכי חדשה. -{% capture notice-1 %} -היו דיווחים על גל של באנים שנינטנדו נתנו למי שפרץ. כדי להגן על עצמכם, תעשו את השלבים הבאים לפני שאתם מתחילים את המדריך: - -1. לכו להגדרות, שם אל "Internet Settings", שם "SpotPass", ולבסוף אל "Sending of System Information" -1. תבטלו את הגדרת "Sending of System Information" -1. תצאו מהגדרות המערכת -1. לכו לרשימת החברים שלכם(ה[פרצוף הכתום]({{ "/images/friend-list-icon.png" | absolute_url }})בשורה העליונה של מסך הבית) - +אם אתם מקבלים שגיאה ונבעטים מהתפריט, הגדרת רשימת החברים או מבוטלת או שהקונסולה לא יכולה להתחבר לשרתים של נינטנדו (בגלל באן או בעיות בחיבור) -1. לכו להגדרות רשימת החברים, שם אל "Friend Notification Settings", ולבסוף אל "Show friends what you're playing" -1. תבטלו את האפשרות "Show friends what you're playing" -1. תצאו מרשימת החברים - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### הנחיות @@ -39,7 +25,6 @@ title: "עדכון B9S" {: .notice--info} 1. תכניסו את ה-SD שלכם למחשב -1. תעתיקו את `boot.3dsx` אל שורש כרטיס ה SD 1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap` 1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם 1. העתיקו את `SafeB9SInstaller.firm` מהזיפ של SafeB9SInstaller אל תיקיית /luma/payloads/ ב- SD שלכם @@ -58,7 +43,7 @@ title: "עדכון B9S" 1. תכבו את המכשיר 1. תכניסו את ה-SD שלכם למחשב -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם 1. תפעילו את המכשיר diff --git a/_pages/hr_HR/a9lh-to-b9s.txt b/_pages/hr_HR/a9lh-to-b9s.txt index 60eaed476f..ec52109ad7 100644 --- a/_pages/hr_HR/a9lh-to-b9s.txt +++ b/_pages/hr_HR/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/hr_HR/bannerbomb3.txt b/_pages/hr_HR/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/hr_HR/bannerbomb3.txt +++ b/_pages/hr_HR/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/hr_HR/checking-for-cfw.txt b/_pages/hr_HR/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/hr_HR/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/hr_HR/credits.txt b/_pages/hr_HR/credits.txt index e66f591db9..c30986407b 100644 --- a/_pages/hr_HR/credits.txt +++ b/_pages/hr_HR/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/hr_HR/dsidumper.txt b/_pages/hr_HR/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/hr_HR/dsidumper.txt +++ b/_pages/hr_HR/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/hr_HR/faq.txt b/_pages/hr_HR/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/hr_HR/faq.txt +++ b/_pages/hr_HR/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/hr_HR/finalizing-setup.txt b/_pages/hr_HR/finalizing-setup.txt index 90f49a797f..6f9a26a828 100644 --- a/_pages/hr_HR/finalizing-setup.txt +++ b/_pages/hr_HR/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/hr_HR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/hr_HR/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/hr_HR/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/hr_HR/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/hr_HR/flashing-ntrboot-(3ds-single-system).txt b/_pages/hr_HR/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/hr_HR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/hr_HR/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/hr_HR/flashing-ntrboot-(nds).txt b/_pages/hr_HR/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/hr_HR/flashing-ntrboot-(nds).txt +++ b/_pages/hr_HR/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/hr_HR/formatting-sd-(linux).txt b/_pages/hr_HR/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/hr_HR/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/hr_HR/formatting-sd-(mac).txt b/_pages/hr_HR/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/hr_HR/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/hr_HR/formatting-sd-(windows).txt b/_pages/hr_HR/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/hr_HR/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/hr_HR/get-started-(new-3ds).txt b/_pages/hr_HR/get-started-(new-3ds).txt new file mode 100644 index 0000000000..65bd5f0197 --- /dev/null +++ b/_pages/hr_HR/get-started-(new-3ds).txt @@ -0,0 +1,54 @@ +--- +title: "Get Started (New 3DS)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. + +Your device version can be found at the bottom right of the top screen of the System Settings. + +![]({{ "/images/screenshots/system-version.png" | absolute_url }}) +{: .notice--info} + +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + +### Version Table + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
FromToAction
1.0.011.3.0Installing boot9strap (Soundhax)
11.4.011.13.0Installing boot9strap (SSLoth-Browser)
11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

diff --git a/_pages/hr_HR/get-started-(old-3ds).txt b/_pages/hr_HR/get-started-(old-3ds).txt new file mode 100644 index 0000000000..2dbfd6b915 --- /dev/null +++ b/_pages/hr_HR/get-started-(old-3ds).txt @@ -0,0 +1,50 @@ +--- +title: "Get Started (Old 3DS)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. + +Your device version can be found at the bottom right of the top screen of the System Settings. + +![]({{ "/images/screenshots/system-version.png" | absolute_url }}) +{: .notice--info} + +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + +### Version Table + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
FromToAction
1.0.011.3.0Installing boot9strap (Soundhax)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

diff --git a/_pages/hr_HR/get-started.txt b/_pages/hr_HR/get-started.txt index 824816730c..a7240e762e 100644 --- a/_pages/hr_HR/get-started.txt +++ b/_pages/hr_HR/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/hr_HR/godmode9-usage.txt b/_pages/hr_HR/godmode9-usage.txt index 99014ce114..cd139f0548 100644 --- a/_pages/hr_HR/godmode9-usage.txt +++ b/_pages/hr_HR/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/hr_HR/home.txt b/_pages/hr_HR/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/hr_HR/home.txt +++ b/_pages/hr_HR/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/hr_HR/homebrew-launcher-(browserhax-2020).txt b/_pages/hr_HR/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/hr_HR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/hr_HR/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/hr_HR/homebrew-launcher-(pichaxx).txt b/_pages/hr_HR/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/hr_HR/homebrew-launcher-(pichaxx).txt +++ b/_pages/hr_HR/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/hr_HR/homebrew-launcher-(soundhax).txt b/_pages/hr_HR/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/hr_HR/homebrew-launcher-(soundhax).txt +++ b/_pages/hr_HR/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/hr_HR/homebrew-launcher-(steelhax).txt b/_pages/hr_HR/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/hr_HR/homebrew-launcher-(steelhax).txt +++ b/_pages/hr_HR/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/hr_HR/installing-boot9strap-(browser).txt b/_pages/hr_HR/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/hr_HR/installing-boot9strap-(browser).txt +++ b/_pages/hr_HR/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/hr_HR/installing-boot9strap-(fredtool).txt b/_pages/hr_HR/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/hr_HR/installing-boot9strap-(fredtool).txt +++ b/_pages/hr_HR/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/hr_HR/installing-boot9strap-(frogtool).txt b/_pages/hr_HR/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/hr_HR/installing-boot9strap-(frogtool).txt +++ b/_pages/hr_HR/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/hr_HR/installing-boot9strap-(hardmod).txt b/_pages/hr_HR/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/hr_HR/installing-boot9strap-(hardmod).txt +++ b/_pages/hr_HR/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt b/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/hr_HR/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt +++ b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/hr_HR/installing-boot9strap-(pichaxx).txt b/_pages/hr_HR/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/hr_HR/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/hr_HR/installing-boot9strap-(safecerthax).txt b/_pages/hr_HR/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/hr_HR/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/hr_HR/installing-boot9strap-(soundhax).txt b/_pages/hr_HR/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/hr_HR/installing-boot9strap-(soundhax).txt +++ b/_pages/hr_HR/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/hr_HR/installing-boot9strap-(ssloth-browser).txt b/_pages/hr_HR/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/hr_HR/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/hr_HR/installing-boot9strap-(usm).txt b/_pages/hr_HR/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/hr_HR/installing-boot9strap-(usm).txt +++ b/_pages/hr_HR/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/hr_HR/legacy-methods.txt b/_pages/hr_HR/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/hr_HR/legacy-methods.txt +++ b/_pages/hr_HR/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/hr_HR/ntrboot.txt b/_pages/hr_HR/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/hr_HR/ntrboot.txt +++ b/_pages/hr_HR/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/hr_HR/region-changing.txt b/_pages/hr_HR/region-changing.txt index 75af6091cf..595af43745 100644 --- a/_pages/hr_HR/region-changing.txt +++ b/_pages/hr_HR/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/hr_HR/restoring-cfw.txt b/_pages/hr_HR/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/hr_HR/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/hr_HR/seedminer.txt b/_pages/hr_HR/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/hr_HR/seedminer.txt +++ b/_pages/hr_HR/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/hr_HR/site-navigation.txt b/_pages/hr_HR/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/hr_HR/site-navigation.txt +++ b/_pages/hr_HR/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/hr_HR/updating-b9s.txt b/_pages/hr_HR/updating-b9s.txt index 84d8eb17f1..7bc0a5a605 100644 --- a/_pages/hr_HR/updating-b9s.txt +++ b/_pages/hr_HR/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/hu_HU/a9lh-to-b9s.txt b/_pages/hu_HU/a9lh-to-b9s.txt index bfb301ed26..3213af3cf6 100644 --- a/_pages/hu_HU/a9lh-to-b9s.txt +++ b/_pages/hu_HU/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme Ahhoz, hogy kicsomagold az oldalon található `.7z` fájlokat, egy fájl archiváló programra lesz szükséged, mint amilyen a [7-Zip](http://www.7-zip.org/) vagy a [The Unarchiver](https://theunarchiver.com/). -Ha a Luma3DS-ben PIN-kód van beállítva, akkor a SafeB9SInstaller "OTP Crypto Fail" hibaüzenetet fog adni, hacsak nem kapcsolod ki átmenetileg a PIN-t (újra bekapcsolhatod a folyamat után). +Habár hiszünk abban, hogy az egyedi firmware online használata biztonságos, fordultak elő online hálózati bannolások a múltban, elsősorban csalásért, vagy gyanús eShop aktívitásért. {: .notice--warning} -{% capture notice-1 %} -Kaptunk visszajelzéseket kitiltási hullámokról, melyeket a Nintendo a CFW-t használóknak osztogatott. Ahhoz, hogy megvédd magadat, kérjük kövesd az alábbi lépéseket még az útmutató megkezdése előtt: - -1. Menj a System Settings-be, ott válaszd ezt: "Internet Settings", majd ezt: "SpotPass", végül ezt: "Sending of System Information" -1. Kapcsold ki a "Sending of System Information" opciót -1. Lépj ki a System Settings-ből -1. Válaszd a Friend List opciót (a [narancsszínű fej ikon]({{ "/images/friend-list-icon.png" | absolute_url }}) a Home Menu felső sávján) - + Ha hibaüzenetet kapsz, és visszadob a menübe, a Friend List már vagy korábban letiltásra került, vagy a konzolod nem tud csatlakozni a Nintendo szervereihez (kitiltás, vagy kapcsolódási hiba miatt) -1. Itt menj a beállításokba (Settings), ott válaszd ezt: "Friend Notification Settings", majd ezt: "Show friends what you're playing" -1. Kapcsold ki a "Show friends what you're playing" opciót -1. Lépj ki a Friend List-ből - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### Amire szükséged lesz Vedd figyelembe, hogy a következő szükséges fájl, aminek a neve `secret_sector.bin` ugyanaz, mint ami a `data_input.zip` fájlokban található volt. Ha létezik már a fájl valahol a lemezeden, szükségtelen letöltened ismét, használhatod azt, ami már megvan. @@ -42,23 +26,21 @@ Vedd figyelembe, hogy New 3DS esetében a `secret_sector.bin` fájlra az arm9loa {: .notice--info} * - **Kizárólag New 3DS-hez:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* A [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.0.5) v7.0.5-ös kiadása *(a `.7z` fájl)* +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója +* A [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) v7.0.5 verziója *(a `.7z` fájl)* * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* -* A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) legújabb kiadása +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek A most következő lépésekben mindig írd felül az SD kártyán található fájlokat, ha már létezne bármelyik. {: .notice--info} 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Másold az `boot.3dsx` fájlt az SD kártyád gyökerébe -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a legfrisebb verziószámú Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Másold át az `arm9loaderhax.bin` fájlt a v7.0.5-ös Luma3DS `.7z`-ből az SD kártya gyökerébe 1. Törölj ki minden létező `.bin` payloadot a `/luma/payloads/` mappából az SD kártyán, mivel ezek nem lesznek kompatibilisek a boot9strap kompatibilis Luma3DS verziókkal 1. Másold át a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád `/luma/payloads/` mappájába @@ -71,7 +53,7 @@ A most következő lépésekben mindig írd felül az SD kártyán található f 1. Tedd vissza az SD kártyád a 3DS-be -#### Második rész - boot9strap telepítése +#### II. rész - boot9strap telepítése 1. Indítsd el a készülékedet a (Start) lenyomva tartásával, hogy megjelenjen a SafeB9SInstaller + Ha a Luma konfigurációját látod a SafeB9SInstaller helyett, egyszerűen nyomd meg a (Start) gombot, majd állítsd le a 3DS-edet, és próbáld újra @@ -80,9 +62,9 @@ A most következő lépésekben mindig írd felül az SD kártyán található f + Ha egy "OTP Crypto Fail" hibaüzenetet kapsz, akkor töltsd le a következőt: - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce), majd másold az SD kártyád `/boot9strap/` könyvtárába, és próbáld újra 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et 1. Ha ez elkészült, akkor nyomd meg az (A) gombot az eszközöd újraindításához. - + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + Ha a készüléked kikapcsol indításkor, bizonyosodj meg róla, hogy átmásoltad-e a `boot.firm` fájlt a Luma3DS `.zip` fájlból az SD kártya gyökerébe -#### Harmadik rész - Luma3DS konfigurálása +#### III. rész - Luma3DS konfigurálása 1. A Luma3DS konfigurációs menüben használd az (A) gombot és a D-Pad-et, hogy bekapcsold a következőket: + **"Show NAND or user string in System Settings"** diff --git a/_pages/hu_HU/bannerbomb3.txt b/_pages/hu_HU/bannerbomb3.txt index d07c0b492c..562c4b39dc 100644 --- a/_pages/hu_HU/bannerbomb3.txt +++ b/_pages/hu_HU/bannerbomb3.txt @@ -4,44 +4,47 @@ title: "BannerBomb3" {% include toc title="Tartalomjegyzék" %} +A Seedminer alapú metódusok könnyebb, biztonságosabb metódusokkal kerültek helyettesítésre. Menj vissza a [Kezdeti lépések](get-started) oldalra, kivéve, ha valós okod van, ennek az oldalnak a használatára (mint például hibás váll-gombok). +{: .notice--warning} + ### Fontos tudnivalók -To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. +Ahhoz, hogy a rendszerből kinyerjük a DSiWare adatokat, egy hibát használunk ki a DSiWare adat kezelési ablakában, a rendszer beállításokban. -To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to dump the DSi Internet Settings application to the SD root. +Hogy ezt elérjük, szükségünk van a rendszer titkosítási kulcsára (movable.sed), hogy újra építsünk egy DSiWare mentést, aminek segítségével ki tudjuk nyerni a DSi Internet beállítások alkalmazást az SD kártyára. -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. +Az utasítások az Amerikai, Európai, Japán és Koreai régiójú konzolokon működnek, amik a rendszer verzió mögött egy U, E, J vagy K betű jelöl. ### Amire szükséged lesz -* Your `movable.sed` file from completing [Seedminer](seedminer) +* A `movable.sed` fájl a [Seedminer](seedminer)-ből -#### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer -1. Upload your movable.sed using the "Choose File" option -1. Click "Go" - + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) -1. If your console is powered on, power off your console +#### I. rész - BannerBomb3 +1. Nyisd meg a [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) oldalt a számítógépeden +1. Töltsd fel a `movable.sed` fájlod a "Choose File" opcióval +1. Kattints a "Go"-ra + + Ez le fog tölteni egy speciális DSiWare fájlt `F00D43D5.bin` néven, egy zip fájlban ( `tadmuffin_out.zip`) +1. Ha a konzolod be van kapcsolva, most kapcsold ki 1. Helyezd az SD kártyád a számítógépbe -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it -1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC - + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you dont delete any intentional backups -1. Copy the `F00D43D5.bin` file from the `output\Usa_Europe_Japan_Korea\` folder of the downloaded BannerBomb3 archive (`tadmuffin_out.zip`) to the `Nintendo DSiWare` folder -1. Tedd vissza az SD kártyád a készülékedbe -1. Kapcsold be a készülékedet -1. Lépj be a System Settings-be a készülékeden +1. Navigálj a `Nintendo 3DS` -> `` -> `<32 karakter hosszú azonosító>` -> `Nintendo DSiWare` mappába az SD kártyádon + + ez az `` ugyanaz, mint amit a [Seedminer](seedminer)-hez használtál + + Ha nincs `DSiWare` nevű mappa, akkor hozd létre +1. Ha van más DSiWare mentés fájl (`<8-character-id>.bin`) ebben a mappában, helyezd át őket a számítógépedre + + Így egy üres DSiWare mappát fogsz kapni. Ha áthelyezed a fájlokat a számítógépedre, az segít abban, hogy ne törölj ki semmilyen fontos mentést +1. Másold az `F00D43D5.bin` fájlt a `output\Usa_Europe_Japan_Korea\` mappából, ami a letöltött BannerBomb3 zip-ben volt (`tadmuffin_out.zip`), a `Nintendo DSiWare` mappába +1. Helyezd vissza az SD kártyát a készülékedbe +1. Kapcsold be a készüléked +1. Lépj be a "System Settings"-be a készülékeden 1. Navigálj ide: `Data Management` -> `DSiWare` -1. Click on the SD Card section - + Your system should flash Magenta (pink/purple) and then crash a few seconds later. This means it worked +1. Kattints az SD kártya részre + + A rendszer most Magenta (rózsaszín/lila) színen fog világítani, és össze fog omlani. Ez azt jelenti, hogy működött 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. You should now have `42383841.bin` in SD root. This is the DSiWare backup you will use later in the guide -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) -1. Delete `F00D43D5.bin` from the Nintendo DSiWare folder and from your computer. This file will not be needed anymore +1. Most egy `42383841.bin` fájlnak kell lennie az SD kártya legfelső mappájában. Ez az a DSiWare mentés, amire később még szükséged lesz +1. Navigálj a `Nintendo 3DS` -> `` -> `<32 karakter hosszú azonosító>` -> `Nintendo DSiWare` mappába az SD kártyádon + + ez az `` ugyanaz, mint amit a [Seedminer](seedminer)-hez használtál +1. Töröld ki a `F00D43D5.bin` fájlt a DSiWare mappából és a számítógépedről. Ez nem fog kelleni többet -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) +Továbblépés a [Boot9strap telepítésére (Fredtool)](installing-boot9strap-(fredtool)) {: .notice--primary} diff --git a/_pages/hu_HU/cart-update.txt b/_pages/hu_HU/cart-update.txt index 0fa6ea18ef..3c0c7b836c 100644 --- a/_pages/hu_HU/cart-update.txt +++ b/_pages/hu_HU/cart-update.txt @@ -26,7 +26,7 @@ Ez azt is jelenti, hogy egy kártyafrissítés NEM fog új böngészőt telepít * Egy játékkártya, ami [azt a verziót tartalmazza](http://www.3dsdb.com/), amire frissíteni szeretnél -### Utasítások +### Lépések 1. Indítsd el a 3DS-ed recovery módban az (L) + (R) + (A) + (FEL) gombok boot közbeni lenyomva tartásával 1. Ha kérdezi, utasítsd el a frissítést diff --git a/_pages/hu_HU/checking-for-cfw.txt b/_pages/hu_HU/checking-for-cfw.txt new file mode 100644 index 0000000000..413d5d188a --- /dev/null +++ b/_pages/hu_HU/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "CFW ellenőrzése" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +Ez egy kiegészítő fejezet ahhoz, hogy ellenőrizhesd, a konzolod rendelkezik-e valamelyik modern custom firmware-rel. + +Ha a konzolod már rendelkezik arm9loaderhax vagy boot9strap alapú custom firmware-rel, akkor kövesd a lépéseket, amik segítségével egy modernebb verzióra frissíthetsz. + +Ha a konzolod menuhax alapú CFW konfiguráció, akkor [töröld a Home menü extdata-ját](troubleshooting#clear-home-menu-extdata). +{: .notice--primary} + +### Lépések + +1. Kapcsold ki a konzolod +1. Nyomd le és tartsd nyomva (Select) gombot +1. Kapcsold be a konzolod, miközben nyomva tartod a (Select) gombot +1. Ezt követően egy konfigurációs menüt fogsz látni + +___ + +Ha a konzolod visszatér a normál home menühöz, akkor térj vissza a [Kezdeti lépésekhez](get-started) +{: .notice--success} + +Ha az látod, hogy a Luma3DS verzió 7.0.5 vagy kisebb folytasd az [A9LH-ről B9S-re](a9lh-to-b9s) résszel +{: .notice--primary} + +Ha az látod, hogy a Luma3DS verzió 7.1, folytasd a [B9S frissítése](updating-b9s) résszel +{: .notice--primary} + +Ha az látod, hogy a Luma3DS verzió 8.0 vagy nagyobb, folytasd a [CFW helyreállítása](restoring-cfw) résszel +{: .notice--primary} + +Ha olyat látsz, ami nincs a fentiek között, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, angolul, támogatást. +{: .notice--danger} diff --git a/_pages/hu_HU/credits.txt b/_pages/hu_HU/credits.txt index cf173156d1..3db856a163 100644 --- a/_pages/hu_HU/credits.txt +++ b/_pages/hu_HU/credits.txt @@ -2,13 +2,16 @@ title: "Közreműködők" --- +**Külön köszönet Plailect-nek, a guide eredeti készítőjének és karbantartójának!** +{: .notice--primary} + **Külön köszönet mindenkinek a [Freenode #Cakey](http://webchat.freenode.net/?channels=%23Cakey) csatornájáról!** {: .notice--primary} **Külön köszönet minden [fordítónak](https://crowdin.com/project/3ds-guide), amiért ilyen királyok!** {: .notice--primary} -Ha kihagytalak volna innét, lépj kapcsolatba velem, és hozzáadom a neved. +Ha kihagytunk volna innen, lépj kapcsolatba velünk, és hozzáadjuk a neved. {% capture notice-1 %} @@ -22,7 +25,7 @@ Ha kihagytalak volna innét, lépj kapcsolatba velem, és hozzáadom a neved. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Ha kihagytalak volna innét, lépj kapcsolatba velem, és hozzáadom a neved. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Ha kihagytalak volna innét, lépj kapcsolatba velem, és hozzáadom a neved. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/hu_HU/ctrtransfer.txt b/_pages/hu_HU/ctrtransfer.txt index 7aefb8fc2a..406a1e7c75 100644 --- a/_pages/hu_HU/ctrtransfer.txt +++ b/_pages/hu_HU/ctrtransfer.txt @@ -17,7 +17,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS ### Amire szükséged lesz -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* A [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) v1.9.2pre1 kiadása * Az [FBI](https://github.com/Steveice10/FBI/releases/latest) legújabb kiadása *(a`.3dsx` fájl)* * Az eszközödhöz és régiódhoz tartozó 11.5.0-s CTRTransfer képfájl *(ha az eszközöd a felsoroltak közül egyik régióba sem tartozik, akkor válassz egyet, ami passzol az eszközöd típusához)*: @@ -30,9 +30,9 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS + - [Old 3DS vagy 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + - [Old 3DS vagy 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe @@ -44,7 +44,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS 1. Másold az `FBI.3dsx` fájlt az SD kártyád `/3ds/` mappájába 1. Tedd vissza az SD kártyád a készülékedbe -#### Második rész - CTRTransfer +#### II. rész - CTRTransfer 1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben 1. Ha rákérdez arra, hogy csináljon-e egy biztonsági másolatot (essential files backup), akkor nyomd meg az (A) gombot, hogy csináljon, majd amikor végzett, nyomd meg ismét az (A) gombot a folytatáshoz @@ -76,7 +76,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS + B9S és Luma használatakor (mint esetedben) biztonságosak a rendszerfrissítések + Ha ez hibát ad, akkor állítsd a DNS beállításodat "auto"-ra -#### Harmadik rész - FBI elindítása +#### III. rész - FBI elindítása 1. Indítsd el a Download Play alkalmazást (ez az [ikon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Nyomd meg az (L) + (Le) + (Select) gombokat egyszerre, hogy a Rosalina menü megnyitásához @@ -89,7 +89,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS 1. Indítsd el a Download Play alkalmazást 1. Ekkor a készülékednek be kell töltenie a Homebrew Launchert -#### Negyedik rész - Ticketek újratelepítése +#### IV. rész - Ticketek újratelepítése Ha a szkript nem talált egy ticketet sem, és azt írta, hogy hagyd ki ezt a rész, akkor hagyd is ki {: .notice--info} @@ -109,7 +109,7 @@ Ha a szkript nem talált egy ticketet sem, és azt írta, hogy hagyd ki ezt a r + Nyomd meg a (B) gombot, hogy elutasítsd a ticketek CDN-ről történő telepítését. 1. Nyomd meg a (Home) gombot az FBI-ból való kilépéshez -#### Ötödik rész - CTRTransfer képfájl eltávolítása +#### V. rész - CTRTransfer képfájl eltávolítása 1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben 1. Menj ide: `[0:] SDCARD` -> `gm9` diff --git a/_pages/hu_HU/dsidumper.txt b/_pages/hu_HU/dsidumper.txt index 50454391b7..359d89ee44 100644 --- a/_pages/hu_HU/dsidumper.txt +++ b/_pages/hu_HU/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Tartalomjegyzék" %} - -### Fontos tudnivalók - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### Amire szükséged lesz - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Első rész - Előkészületek - -1. Kapcsold ki a készüléked -1. Helyezd az SD kártyád a számítógépbe -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Tedd vissza az SD kártyád a készülékedbe -1. Kapcsold be a készülékedet - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +Ez az oldal el lett távolítva, mert a használlt módszer már elavult. Kérlek használj egy modern módszert a [Kezdeti Lépések](get-started) oldalról. +{: .notice--warning} diff --git a/_pages/hu_HU/f3-(linux).txt b/_pages/hu_HU/f3-(linux).txt index 7c48f8597d..af9a4dc79b 100644 --- a/_pages/hu_HU/f3-(linux).txt +++ b/_pages/hu_HU/f3-(linux).txt @@ -16,13 +16,13 @@ Ez az oldal Linux felhasználókra vonatkozik. Ha nem Linuxod van, nézd meg a [ * Az [F3](https://github.com/AltraMayor/f3/releases/latest) legújabb kiadása -### Utasítások +### Lépések 1. Csomagold ki az f3 `.zip` fájlt 1. Lépj `cd` paranccsal az f3 könyvtárba 1. Futtasd a `make`-et az F3 összeállításához 1. Helyezd az SD kártyád a számítógépbe -1. Csatold fel az SD kártyádat +1. Csatold fel az SD kártyád 1. Futtasd a `./f3write ` parancsot 1. Várj, amíg a folyamat befejeződik. Lentebb egy példa kimenet látható. diff --git a/_pages/hu_HU/f3x-(mac).txt b/_pages/hu_HU/f3x-(mac).txt index fa406d7319..78880b4597 100644 --- a/_pages/hu_HU/f3x-(mac).txt +++ b/_pages/hu_HU/f3x-(mac).txt @@ -16,7 +16,7 @@ Ez az oldal Mac felhasználókra vonatkozik. Ha nem Mac-ed van, nézd meg a [H2t * Az [F3X](https://github.com/insidegui/F3X/releases/latest) legújabb kiadása -### Utasítások +### Lépések 1. Csomagold ki az F3X `.zip` fájlt 1. Helyezd az SD kártyád a számítógépbe diff --git a/_pages/hu_HU/faq.txt b/_pages/hu_HU/faq.txt index 91e43ba8f9..d2e94263c9 100644 --- a/_pages/hu_HU/faq.txt +++ b/_pages/hu_HU/faq.txt @@ -6,7 +6,7 @@ title: "GYIK" **V:** Igen **K:** *Hogyan frissíthetem a Luma3DS-t?* -**V:** Használd a [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)-t +**V:** Másold a `boot.firm` és a `boot.3dsx` fájlokat a [Luma3DS legfrissebb verziójából](https://github.com/LumaTeam/Luma3DS/releases/latest) az SD kártya gyökerébe, felülírva a létező fájlokat. **K:** *Hallottam erről a dologról, amiért fizetnem kell (Gateway, Sky3DS, stb). Szükségem lesz ilyesmire?* **V:** Nem. A boot9strap a legkifinomultabb módszer hax betöltésére, ami a boot korai fázisában fut. @@ -48,4 +48,4 @@ title: "GYIK" **V:** Egyedül arra van szükséged, hogy fájlokat tudj másolni egy SD kártyára! **K:** *Segítség! Valami rossz dolog történt és most nem tudok bootolni...* -**V:** Kérlek, nézd meg a [hibaelhárítási útmutatót](troubleshooting). +**V:** Kérjük, nézd meg a [hibaelhárítási útmutatót](troubleshooting). diff --git a/_pages/hu_HU/file-extensions-(windows).txt b/_pages/hu_HU/file-extensions-(windows).txt index 4d773baab4..9b0cee5205 100644 --- a/_pages/hu_HU/file-extensions-(windows).txt +++ b/_pages/hu_HU/file-extensions-(windows).txt @@ -10,7 +10,7 @@ Ez egy kiegészítő rész, amelyben kikapcsoljuk a Windows azon alap viselkedé Ez megkönnyíti majd számodra, hogy megtaláld az útmutatóban említett fájlokat. -### Utasítások +### Lépések #### Windows 10 / 8.1 / 8 diff --git a/_pages/hu_HU/finalizing-setup.txt b/_pages/hu_HU/finalizing-setup.txt index a9b5d6f159..9db7625326 100644 --- a/_pages/hu_HU/finalizing-setup.txt +++ b/_pages/hu_HU/finalizing-setup.txt @@ -8,53 +8,54 @@ title: "Telepítés véglegesítése" A `boot.firm` nevezetű fájl az, amit maga a boot9strap elindít, amint betöltődik a NAND-ból, és ami bármilyen érvényes arm9 payload lehet, FIRM formátumban. Ezt a fájlt bármikor cserélni lehet, ugyanakkor a Luma3DS lehetővé teszi bármilyen más, FIRM formátumú arm9 payload elindítását a Luma3DS chainloader segítségével. -A mi esetünkben az [AuroraWright](https://github.com/AuroraWright/)-féle Luma3DS-t fogjuk használni, hogy közvetlenül bootolhassunk egy patchelt SysNAND-ot. Ez teljesen szükségtelenné teszi bármiféle EmuNAND használatát, nagy mértékben egyszerűsítve ezzel a hackelt 3DS-ek használatát, a megspórolt SD kártya területről nem is beszélve. +A mi esetünkben az [LumaTeam](https://github.com/LumaTeam/)-féle Luma3DS-t fogjuk használni, hogy közvetlenül bootolhassunk egy patchelt SysNAND-ot. Ez teljesen szükségtelenné teszi bármiféle EmuNAND használatát, nagy mértékben egyszerűsítve ezzel a hackelt 3DS-ek használatát, a megspórolt SD kártya területről nem is beszélve. Ezen folyamat közben további programokat is telepítünk, melyek az alábbiak: + **FBI** *(CIA formátumú játékokat és alkalmazásokat telepít)* + **Anemone3DS** *(egyedi témákat telepít)* + **Checkpoint** *(3DS és DS játékok mentéseiről lehet biztonsági mentést készíteni és visszaállítani)* -+ **Luma3DS Updater** *(egyszerűen frissíthető vele a CFW)* ++ **Universal-Updater** *(egy homebrew app store homebrew letöltéséhez a 3DS-re wifi-n keresztül)* + **GodMode9** *(sokféle dologra használható eszköz, például NAND és kártya műveletekre)* + **Homebrew Launcher Loader** *(elindítja a Homebrew Launchert)* -+ **DSP1** *(allows homebrew applications to have sound)* -+ **ctr-no-timeoffset** *(removes the rtc offset so that the home menu and rtc timestamps match)* ++ **DSP1** *(lehetővé teszi a homebrew applikációk számára a hangot)* ++ **ctr-no-timeoffset** *(eltávolítja az RTC eltolást, így a Home menü és az RTC timestamp-ek egyeznek)* ### Amire szükséged lesz * Az [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) legújabb kiadása *(a `.cia` fájl)* * A [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) legújabb kiadása *(a `.cia` fájl)* +* A [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) legújabb kiadása *(a `.cia` fájl)* * A [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) legújabb kiadása -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* A [DSP1](https://github.com/zoogie/DSP1/releases/latest) legújabb kiadása +* A [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) v1.9.2pre1 kiadása +* A [DSP1](https://github.com/zoogie/DSP1/releases/latest) legújabb kiadása *(a `.cia` fájl)* * Az [FBI](https://github.com/Steveice10/FBI/releases/latest) legújabb kiadása *(a `.cia` és a `.3dsx` fájl is)* * A [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) legújabb kiadása -* A [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) legfrissebb változata *(a `.cia` fájl)* ### Utasítások -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe 1. Hozz létre egy mappát `3ds` néven az SD kártyád gyökerében, ha még nem létezik ilyen + + Ez a mappa tárolja a homebrew applikációkat és adataikat; ez mást mint a `Nintendo 3DS` mappa, amit az eszköz automatikusan generál 1. Hozz létre egy mappát `cias` néven az SD kártyád gyökerében, ha még nem létezik ilyen 1. Másold a `ctr-no-timeoffset.3dsx`-et az SD kártyád `/3ds/` mappájába 1. Másold az `FBI.3dsx` fájlt az SD kártyád `/3ds/` mappájába 1. Másold a `Homebrew_Launcher.cia` fájlt az SD kártyán található `/cias/` mappába -1. Másold a `lumaupdater.cia` fájlt az SD kártyán található `/cias/` mappába 1. Másold az `FBI.cia` fájlt az SD kártyád `/cias/` mappájába 1. Másold a `DSP1.cia` fájlt az SD kártyád `/cias/` mappájába 1. Másold az `Anemone3DS.cia` fájlt az SD kártyád `/cias/` mappájába 1. Másold a `Checkpoint.cia` fájlt az SD kártyán található `/cias/` mappába +1. Másold a `Universal-Updater.cia` fájlt az SD kártyád található `/cias/` mappájába 1. Hozz létre egy mappát `payloads` néven az SD kártyád `luma` nevezetű mappájában, ha még nem létezik ilyen 1. Másold át a `GodMode9.firm` fájlt a GodMode9 `.zip`-ből az SD kártyád `/luma/payloads/` mappájába 1. Másold át a `gm9` mappát a GodMode9 `.zip`-ből az SD kártyád gyökerébe 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet -#### Második rész - A rendszer frissítése +#### II. rész - A rendszer frissítése Amennyiben egyszer már végigcsináltad a jelenlegi leírás egy korábbi változatát, és 2.1.0-s verzióra CTRTransfer-elted a *New 3DS* konzolodat, itt az idő, hogy [visszaállítsd a NAND-od biztonsági mentését](godmode9-usage#restoring-a-nand-backup), mielőtt ezt a részt folytatnád. {: .notice--danger} @@ -64,15 +65,15 @@ Amennyiben ezen leírás megkezdése előtt már rendelkeztél EmuNAND-dal, és 1. Frissítsd az eszközödet következőképp. Lépj be a System Settings-be, majd az "Other settings"-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a "System Update" opciót. + B9S és Luma használatakor (mint esetedben) biztonságosak a rendszerfrissítések - + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section + + A frissítő elképzelhető, hogy megjeleníti a "Your system is up to date" üzenetet a frissítés helyett. Ez normális, ha már frissítettél; folytasd a következő szakasszal + Ha ez hibát ad, akkor állítsd a DNS beállításodat "auto"-ra + Ha még így is hibát kapsz, kövesd a [CTRTransfer](ctrtransfer) című útmutatót, majd próbáld újra -#### Harmadik rész - Homebrew Launcher +#### III. rész - Homebrew Launcher -1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) -1. Wait until you see the two buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Indítsd el a Download Play alkalmazást (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Várj, amíg két gombot nem látsz +1. Nyomd le az (L) + (D-Pad le) + (Select) gombokat egyszerre a Rosalina menü megnyitásához 1. Válaszd ki a "Miscellaneous options"-t 1. Válaszd a "Switch the hb. title to the current app." opciót 1. Nyomd meg a (B) gombot a folytatáshoz @@ -87,22 +88,22 @@ Amennyiben ezen leírás megkezdése előtt már rendelkeztél EmuNAND-dal, és 1. Nyomd meg a (Start) gombot, hogy visszatérj a Homebrew Launcher-be 1. Indítsd el az FBI-t a homebrew listából -#### Negyedik rész - CIA fájlok telepítése +#### IV. rész - CIA fájlok telepítése 1. Menj ide: `SD` -> `cias` 1. Válaszd ezt: "\" 1. Válaszd az "Install and delete all CIAs" opciót, majd nyomd meg az (A) gombot a megerősítéshez 1. Nyomd meg a (Home) gombot és zárd be a Download Play-t -#### Ötödik rész - DSP kimentése +#### V. rész - DSP kimentése 1. Indítsd el a DSP1 nevű alkalmazást 1. Amint végzett, nyomd meg a (B) gombot, hogy az alkalmazás törölje magát és visszatérjen a Home Menu-be -#### Hatodik rész - Luma3DS telepítése CTRNAND-ba +#### VI. rész - Luma3DS telepítése CTRNAND-ba 1. Kapcsold ki a készüléked -1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben +1. Nyomd le és tartsd nyomva a (Start) gombot, és a (Start) nyomva tartása mellett kapcsold be az eszközödet. Ez elindítja a GodMode9-et 1. Ha rákérdez arra, hogy csináljon-e egy biztonsági másolatot (essential files backup), akkor nyomd meg az (A) gombot, hogy csináljon, majd amikor végzett, nyomd meg ismét az (A) gombot a folytatáshoz 1. Ha rákérdez arra, hogy szeretnéd-e a valós dátumot és időt javítani (fix the RTC date&time), nyomd meg az (A) gombot, állítsd be a helyes dátumot és időt, majd nyomd meg az (A) gombot a folytatáshoz 1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü @@ -111,17 +112,17 @@ Amennyiben ezen leírás megkezdése előtt már rendelkeztél EmuNAND-dal, és 1. Válaszd ezt: "Scripts from Plailect's Guide" 1. Válaszd ezt: "Setup Luma3DS to CTRNAND" 1. Amikor kéri, nyomd meg az (A) gombot a folytatáshoz -1. Nyomd meg az (A) gombot, hogy feloldd a SysNAND (lvl1) írást, majd sorban nyomd meg a kijelzett gombokat +1. Nyomd meg az (A) gombot, hogy feloldd a SysNand (lvl1) írást, majd sorban nyomd meg a kijelzett gombokat 1. Nyomd meg az (A) gombot a folytatáshoz -#### Hetedik rész - Takarítás az SD kártyán +#### VII. rész - Takarítás az SD kártyán 1. Válaszd ezt: "Cleanup SD Card" 1. Amikor kéri, nyomd meg az (A) gombot a folytatáshoz 1. Nyomd meg az (A) gombot a folytatáshoz 1. Nyomd meg a (B) gombot, hogy visszamenj a főmenübe -#### Nyolcadik rész - Backup Essential Files +#### VIII. rész - Backup Essential Files 1. Válaszd ezt: "Backup Options" 1. Válaszd ezt: "SysNAND Backup" @@ -137,9 +138,9 @@ Amennyiben ezen leírás megkezdése előtt már rendelkeztél EmuNAND-dal, és 1. Válaszd ki ezt: "Copy to 0:/gm9/out" 1. Nyomd meg az (A) gombot a folytatáshoz 1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü -1. Select "Poweroff system" to power off your device +1. Válaszd a "Poweroff system"-et az eszközöd kikapcsolásához 1. Helyezd az SD kártyád a számítógépbe -1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, and `boot9.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer +1. Másold a `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs` és `boot9.bin` fájlokat a `/gm9/out/` mappából az SD kártyáról egy biztonságos helyre a számítógépeden + Tarts belőle biztonsági másolatokat több különböző helyen is (például online tárhelyen) + Ezek a biztonsági mentések fognak megmenteni, ha a későbbiekben brickelődne a konzolod, vagy bármi félresikerülne a jövőben 1. Töröld a `__sysnand_###.bin` és a `__sysnand_###.bin.sha` fájlokat az SD kártyád `/gm9/out/` mappájából, miután lemásoltad azokat @@ -148,20 +149,10 @@ Amennyiben ezen leírás megkezdése előtt már rendelkeztél EmuNAND-dal, és ___ -#### Information and Notes - -{% capture notice-10 %} -Mostantól bármikor frissítheted a Luma3DS-t a Luma3DS frissítő (Luma3DS Updater) segítségével, ha megnyitod, majd megnyomod az (A) gombot. - -Ennek semmi köze a rendszer frissítéséhez (System Update); ez mindössze letölti és kicsomagolja a legfrissebb Luma3DS fájlokat. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
+#### Információk és jegyzetek {% capture notice-6 %} -Mostantól alapértelmezetten a Luma3DS CFW SysNAND fog bootolni. +Mostantól alapértelmezetten a Luma3DS CFW fog bootolni. Mostantól indításkor előhozhatod a Luma3DS konfigurációs menüjét a (Select) gomb lenyomva tartásával. @@ -177,7 +168,7 @@ Mostantól lenyomhatod az (L) + (Le) + (Select) kombinációt a rendszer futása {% capture notice-6 %} Ha szeretnél a későbbiekben nagyobb SD kártyát használni, mindössze annyit kell tenned, hogy az új SD kártyádat FAT32-re formázod, majd átmásolod a régi SD kártyád tartalmát az újra. -Ha az új SD kártyád nagyobb, mint 32 GB, más eszközre lesz szükséged a formázásához. Ilyen a [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) Windows-on, a [gparted](http://gparted.org/download.php) Linuxon, illetve a [Lemezkezelő](https://support.apple.com/hu-hu/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) Mac-en. +Ha az új SD kártyád nagyobb mint 32GB akkor egy különleges eszközt kell használnod ahoz, hogy leformázd: [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), vagy [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,8 +182,8 @@ Ha kíváncsi vagy a GodMode9 különféle funkcióira, olvasd el a [GodMode9 ha Ha a Luma3DS képességeire vagy kíváncsi, keresd fel a hozzá tartozó [wikit](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -Ha egyedi témákat, nyitóképeket (splash screen-eket) szeretnél telepíteni, látogasd meg a [Theme Plaza](https://themeplaza.eu/) oldalt. +Egyedi témák és nyitóképek (splash screen-ek) telepítésével kapcsolatos további információért látogasd meg a [Theme Plaza](https://themeplaza.art/) oldalt. {: .notice--success} -For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). +Ha a Gateshark csalásokat szeretnél Luma3DS-en használni, látogasd meg a következőt: [Checkpoint](https://github.com/FlagBrew/Checkpoint). {: .notice--success} diff --git a/_pages/hu_HU/flashing-ntrboot-(3ds-multi-system).txt b/_pages/hu_HU/flashing-ntrboot-(3ds-multi-system).txt index 3a2bfb8412..cd373c8697 100644 --- a/_pages/hu_HU/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/hu_HU/flashing-ntrboot-(3ds-multi-system).txt @@ -19,12 +19,12 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol * Két eszköz a 3DS családból + **A forrás 3DS**: egy eszköz a 3DS családból, amin már boot9strap fut + **A cél 3DS**: egy eszköz, ami gyári állapotban van -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb verziója *(az `ntr` boot9strap; nem a `devkit` fájl)* +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb verziója *(`boot9strap-1.3-ntr.zip`; nem a devkit fájl)* * Az [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) legújabb verziója -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a **forrás 3DS**-t 1. Helyezd be a **forrás 3DS** SD kártyáját a számítógépbe @@ -34,7 +34,7 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol 1. Helyezd vissza a **forrás 3DS** SD kártyáját a **forrás 3DS**-be 1. Helyezd be az ntrboot kompatibilis DS / DSi flashkártyádat a **forrás 3DS**-be -#### Második rész - ntrboot flashelése +#### II. rész - ntrboot flashelése 1. Indítsd el a Luma3DS chainloadert a (Start) lenyomva tartásával boot közben a **forrás 3DS**-en 1. Válaszd az "ntrboot_flasher" opciót @@ -54,5 +54,5 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol ___ -### Továbblépés a [boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) +### Továbblépés a [Boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) {: .notice--primary} diff --git a/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt b/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt index 15e2e4b6c2..a718b55f2d 100644 --- a/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt @@ -16,12 +16,12 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol ### Amire szükséged lesz * Olyan flashkártya, ami támogatja az ntrboot-ot -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb verziója *(az `ntr` boot9strap; nem a `devkit` fájl)* +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb verziója *(`boot9strap-1.3-ntr.zip`; nem a devkit fájl)* * A [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) legújabb kiadása -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd a flashkártyád SD kártyáját a számítógépbe @@ -31,7 +31,7 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol 1. Helyezd vissza a flashkártyád SD kártyáját a flashkártyádba 1. Helyezd be az ntrboot kompatibilis DS / DSi flashkártyádat az eszközödbe -#### Második rész - ntrboot flashelése +#### II. rész - ntrboot flashelése 1. Indítsd el az `ntrboot_flasher_nds.nds` fájlt a készülékeden a flashkártyád segítségével 1. Nyomd meg az (A) gombot a folytatáshoz @@ -49,5 +49,5 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol ___ -### Továbblépés a [boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) +### Továbblépés a [Boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) {: .notice--primary} diff --git a/_pages/hu_HU/flashing-ntrboot-(dsi).txt b/_pages/hu_HU/flashing-ntrboot-(dsi).txt index 7ab7c4b628..fb2295c5ea 100644 --- a/_pages/hu_HU/flashing-ntrboot-(dsi).txt +++ b/_pages/hu_HU/flashing-ntrboot-(dsi).txt @@ -21,9 +21,9 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol + **A cél 3DS**: egy eszköz a 3DS családból, ami gyári állapotban van * A [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) legújabb verziója *(a `dsi` flasher; nem a sima flasher)* -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a **forrás DSi**-t 1. Helyezd a flashkártyád SD kártyáját a számítógépbe @@ -31,7 +31,7 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol 1. Helyezd vissza a flashkártyád SD kártyáját a flashkártyádba 1. Helyezd be az ntrboot kompatibilis DS / DSi flashkártyádat a **forrás DSi**-be -#### Második rész - ntrboot flashelése +#### II. rész - ntrboot flashelése 1. Indítsd el a `ds_ntrboot_flasher_dsi.nds` fájlt **a forrás DSi-n** a flashkártyád segítségével 1. Nyomd meg az (A) gombot a folytatáshoz @@ -44,5 +44,5 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol ___ -### Továbblépés a [boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) +### Továbblépés a [Boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) {: .notice--primary} diff --git a/_pages/hu_HU/flashing-ntrboot-(nds).txt b/_pages/hu_HU/flashing-ntrboot-(nds).txt index 1f4274ef59..af17c64f9b 100644 --- a/_pages/hu_HU/flashing-ntrboot-(nds).txt +++ b/_pages/hu_HU/flashing-ntrboot-(nds).txt @@ -19,12 +19,12 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol * Két készülék + **A forrás NDS / NDSL**: egy Nintendo DS vagy Nintendo DS Lite, ami támogatja a flashkártyádat + **A cél 3DS**: egy eszköz a 3DS családból, ami gyári állapotban van -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb verziója *(az `ntr` boot9strap; nem a `devkit` fájl)* +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb verziója *(`boot9strap-1.3-ntr.zip`; nem a `devkit` fájl)* * A [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) legújabb kiadása -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a **forrás NDS-t / NDSL-t** 1. Helyezd a flashkártyád SD kártyáját a számítógépbe @@ -34,7 +34,7 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol 1. Helyezd vissza a flashkártyád SD kártyáját a flashkártyádba 1. Helyezd be az ntrboot kompatibilis DS / DSi flashkártyádat a **forrás NDS-be / NDSL-be** -#### Második rész - ntrboot flashelése +#### II. rész - ntrboot flashelése 1. Indítsd el az `ntrboot_flasher_nds.nds` fájlt a **forrás NDS-en / NDSL-en** a flashkártyád segítségével 1. Nyomd meg az (A) gombot a folytatáshoz @@ -53,5 +53,5 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol ___ -### Továbblépés a [boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) +### Továbblépés a [Boot9strap telepítésére (ntrboot)](installing-boot9strap-(ntrboot)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/hu_HU/formatting-sd-(linux).txt b/_pages/hu_HU/formatting-sd-(linux).txt new file mode 100644 index 0000000000..ad3e73ed95 --- /dev/null +++ b/_pages/hu_HU/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "SD formázás (Linux)" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +Ez egy kiegészítő rész az SD kártya formázásához, hogy az működjön a 3DS-el. + +Ha a 3DS már felismeri az SD kártyát, ez az útmutató nem szükséges. + +Ez az oldal Linux felhasználókra vonatkozik. Ha nem Linux rendszeren vagy, kövesd az [SD formázás (Windows)](formatting-sd-(windows)) vagy [SD formázás (Mac)](formatting-sd-(mac)) útmutatókat. + +### Lépések +#### I. rész - Annak meghatározása, hogy melyik olvasóban található az SD kártya + +1. Gondoskodj arról, hogy az SD kártya **nincs** bedugva +1. Indítsd el a Linux Terminal-t +1. Írd be, hogy `watch "lsblk"` +1. Tedd be az SD kártyád a PC számítógépedbe +1. Figyeld a kimenetet. Válaszként valami hasonlót kell kapj: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Jegyezd fel az eszköz csatolási pontját. A fenti példában ez `mmcblk0` volt + + Ha az `RO` 1-re állított, ellenőrizd, hogy a zároló csúszka nincs-e lehúzva +1. Nyomj CTRL + C-t a menüből kilépéshez + +#### II. rész - Az SD kártya formázása + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Írd be `sudo cfdisk /dev/(eszköz csatolási pontja fentebb)` +1. Minden partíción nyomj `Delete` gombot +1. Hozz létre egy elsődleges partíciót, ami megfelel az egész SD kártya méretnek + + Ez létre fog hozni egy új partíciót linux fájlrendszerrel +1. Válaszd a típust, és figyelj a menüre +1. Keresd meg a "W95 FAT32"-t és írd fel a kódot balra a szövegtől +1. Nyomj meg egy gombot, majd írd be a kódot, amit az előző lépésben felírtál +1. Nyomj entert és Quit-et diff --git a/_pages/hu_HU/formatting-sd-(mac).txt b/_pages/hu_HU/formatting-sd-(mac).txt new file mode 100644 index 0000000000..ebe614edf7 --- /dev/null +++ b/_pages/hu_HU/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "SD formázás (Mac)" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +Ez egy kiegészítő rész az SD kártya formázásához, hogy az működjön a 3DS-el. + +Ha a 3DS már felismeri az SD kártyát, ez az útmutató nem szükséges. + +Ez az oldal Mac felhasználókra vonatkozik. Ha nem Mac rendszeren vagy, kövesd az [SD formázás (Windows)](formatting-sd-(windows)) vagy [SD formázás (Linux)](formatting-sd-(linux)) útmutatókat. + +### Lépések + +#### OS X El Capitan (10.11) és későbbi + +1. Helyezd az SD kártyád a számítógépbe +1. Ha az SD kártya tartalmaz adatot, akkor azokat másold át a számítógépre +1. Futtasd a Disk Utility appot +1. Bal oldalt felül a "View" menüben válaszd a "Show All Devices" opciót +1. Válaszd ki az SD kártyád a bal oldali panelen + + Legyél biztos abban, hogy a jó meghajtót választod, egyébként rossz merevlemezt törölhetsz! + {: .notice--danger} + +1. Kattints az "Erase"-re felül +1. Adj meg bármít "Name"-nek +1. Ellenőrizd, hogy a "Format" beállítása "MS-DOS (FAT)" +1. Ellenőrizd, hogy a "Scheme" beállítása "Master Boot Record" + + Ha a "Scheme" nem jelenik meg, nyomj "Cancel"-t és ellenőrizd, hogy az eszközt válaszottad-e ki egy kötet helyett +1. Kattints az "Erase"-re +1. Várd meg amíg a formázás befejeződik +1. Kattints a "Close"-ra +1. Ha az SD kártya tartalmazott adatot a formázás előtt, akkor azokat most másold vissza a számítógépről + +#### OS X Yosemite (10.10) és korábbi + +1. Helyezd az SD kártyád a számítógépbe +1. Ha az SD kártya tartalmaz adatot, akkor azokat másold át a számítógépre +1. Futtasd a Disk Utility appot +1. Válaszd ki az SD kártyád a bal oldali panelen + + Legyél biztos abban, hogy a jó meghajtót választod, egyébként rossz merevlemezt törölhetsz! + {: .notice--danger} + +1. Kattints az "Partition"-re felül + + Ha a "Partition" nem jelenik meg, és ellenőrizd, hogy az eszközt válaszottad-e ki egy kötet helyett +1. Ellenőrizd, hogy a "Partition Layout" beállított "1 Partition"-re +1. Adj meg bármít "Name"-nek +1. Ellenőrizd, hogy a "Format" beállítása "MS-DOS (FAT)" +1. Kattints az "Options"-re a partíciós tábla alatt +1. Válaszd a "Master Boot Record"-ot +1. Kattints az "OK"-ra +1. Kattints az "Apply"-ra +1. Kattints a "Partition"-re +1. Várd meg amíg a formázás befejeződik +1. Zárd be a Disk Utility-t +1. Ha az SD kártya tartalmazott adatot a formázás előtt, akkor azokat most másold vissza a számítógépről diff --git a/_pages/hu_HU/formatting-sd-(windows).txt b/_pages/hu_HU/formatting-sd-(windows).txt new file mode 100644 index 0000000000..64f3ce87aa --- /dev/null +++ b/_pages/hu_HU/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "SD formázás (Windows)" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +Ez egy kiegészítő rész az SD kártya formázásához, hogy az működjön a 3DS-el. + +Ha a 3DS már felismeri az SD kártyát, ez az útmutató nem szükséges. + +Ez az oldal Windows felhasználókra vonatkozik. Ha nem Windows rendszeren vagy, kövesd az [SD formázás (Linux)](formatting-sd-(linux)) vagy [SD formázás (Mac)](formatting-sd-(mac)) útmutatókat. + +### Amire szükséged lesz + +* A [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) legújabb kiadása + +### Lépések + +1. Helyezd az SD kártyád a számítógépbe +1. Ha az SD kártya tartalmaz adatot, akkor azokat másold át a számítógépre +1. Futtasd a `guiformat.exe` alkalmazást +1. Válaszd ki az SD kártyád betűjelét a "Drive" alatt + + Legyél biztos abban, hogy a jó meghajtó betűt választod, egyébként rossz merevlemezt törölhetsz! + {: .notice--danger} + +1. Válassz méretet az "Allocation unit size" alatt + + Ha az SD kártya 64GB vagy kisebb válaszd a 32768-at + + Ha az SD kártya 64GB feletti, válaszd a 65536-ot +1. Írj be valamit "Volume label"-nek +1. Ügyelj rá, hogy a "Quick Format" ki legyen választva +1. Kattints a "Start"-ra +1. Kattints az "OK"-ra +1. Várd meg amíg a formázás befejeződik +1. Kattints a "Close"-ra +1. Ha az SD kártya tartalmazott adatot a formázás előtt, akkor azokat most másold vissza a számítógépről + +### Gyakori hibák + +* Failed to open device: GetLastError()=32 + + Csukj le mindent, ami esetleg használhatja az SD kártyát, mint például bármelyik Fájlkezelő ablak. diff --git a/_pages/hu_HU/get-started-(new-3ds).txt b/_pages/hu_HU/get-started-(new-3ds).txt index 44ae642db3..7dbb995213 100644 --- a/_pages/hu_HU/get-started-(new-3ds).txt +++ b/_pages/hu_HU/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Kezdeti lépések (New 3DS)" ### Fontos tudnivalók -Válaszd ki a te verziódhoz tartozó oldalt a lenti táblázatból. Vedd figyelembe, hogy a "min." és a "max." mezőkbe a határok is beleértendők. Ez azt jelenti, hogy például a "minimum 9.0.0, maximum 9.2.0" sorba a 9.0.0, a 9.1.0 és a 9.2.0 is beleértendő. - -Ezen kívül vedd az is figyelembe, hogy a rendszerverziód végén található szám (amit egy kötőjel előz meg) a böngésződ verzióját jelzi. Jelenleg a böngésző verziószáma lényegtelen New 3DS készülékek esetében. - -**Ha nem tudod követni a készüléked verziószámához tartozó utasításokat, mert a hozzájuk tartozó követelményeket nem teljesíted, akkor lásd a "Minden verzió" című sort, ahol olyan módszereket találsz, amelyek rendszerverziótól függetlenül működnek.** - -Minden verzió esetében lehetőséged van [kártyáról](cart-update) (vagy sima System Update-tel) frissíteni egy jelenleginél újabb verzióra, hogy az ahhoz tartozó útmutatót követhesd, maradva a megfelelő oszlopban. +Válaszd ki a te verziódhoz tartozó oldalt a lenti táblázatból. Vedd figyelembe, hogy a "min." és a "max." mezőkbe a határok is beleértendők. Az eszközöd verziója megtalálható a System Settings-ben, a felső képernyő jobb alsó sarkában. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +Habár hiszünk abban, hogy az egyedi firmware online használata biztonságos, fordultak elő online hálózati bannolások a múltban, elsősorban csalásért, vagy gyanús eShop aktívitásért. +{: .notice--warning} + ### Verziótáblázat - + - - - + + + - - - - - - - - - - - + - + - + - - + + - - - + + - +
min.max.min.max.Művelet
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.0boot9strap telepítése (Soundhax)
9.0.01.0.0 11.3.0Homebrew Launcher (Soundhax)Boot9strap telepítése (Soundhax)
11.4.011.7.0Használj egy módszert a "Minden verzió" című sorból11.13.0Boot9strap telepítése (SSLoth-Browser)
11.8.011.8.0boot9strap telepítése (DSiWare)11.14.0 (legutolsó verzió)Boot9strap telepítése (Browser)
MINDEN VERZIÓ

ntrboot
(Kompatibilis flashkártya szükséges)

or

boot9strap telepítése (Hardmod)
(Forrasztás szükséges)

ntrboot
(Kompatibilis flashcart szükséges)

or

Boot9strap telepítése (Hardmod)
(forrasztást igényel)
diff --git a/_pages/hu_HU/get-started-(old-3ds).txt b/_pages/hu_HU/get-started-(old-3ds).txt index 79039b1fda..93bf4eb14b 100644 --- a/_pages/hu_HU/get-started-(old-3ds).txt +++ b/_pages/hu_HU/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Kezdeti lépések (Old 3DS)" ### Fontos tudnivalók -Válaszd ki a te verziódhoz tartozó oldalt a lenti táblázatból. Vedd figyelembe, hogy a "min." és a "max." mezőkbe a határok is beleértendők. Ez azt jelenti, hogy például a "minimum 9.0.0, maximum 9.2.0" sorba a 9.0.0, a 9.1.0 és a 9.2.0 is beleértendő. - -Ezen kívül vedd azt is figyelembe, hogy a táblázat utolsó két oszlopa a rendszerverziód végén található számra utal (ami pedig a böngésződ verzióját jelzi). Ha ez a verziószám -0, akkor nincsen böngésződ, míg minden annál nagyobb szám azt jelzi, hogy rendelkezel böngészővel. - -Például, ha a verziód "5.0.0-0U", akkor a "nincs böngésző" oszlopot kell követned és a "min. 5.0.0, max. 5.1.0" sort, mert a rendszerverziód abba az intervallumba esik, de nincs böngésződ telepítve. - -**Ha nem tudod követni a készüléked verziószámához tartozó utasításokat, mert a hozzájuk tartozó követelményeket nem teljesíted, akkor lásd a "Minden verzió" című sort, ahol olyan módszereket találsz, amelyek rendszerverziótól függetlenül működnek.** - -Minden verzió esetében lehetőséged van [kártyáról](cart-update) (vagy sima System Update-tel) frissíteni egy jelenleginél újabb verzióra, hogy az ahhoz tartozó útmutatót követhesd, maradva a megfelelő oszlopban. +Válaszd ki a te verziódhoz tartozó oldalt a lenti táblázatból. Vedd figyelembe, hogy a "min." és a "max." mezőkbe a határok is beleértendők. Az eszközöd verziója megtalálható a System Settings-ben, a felső képernyő jobb alsó sarkában. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +Habár hiszünk abban, hogy az egyedi firmware online használata biztonságos, fordultak elő online hálózati bannolások a múltban, elsősorban csalásért, vagy gyanús eShop aktívitásért. +{: .notice--warning} + ### Verziótáblázat @@ -33,49 +28,23 @@ Az eszközöd verziója megtalálható a System Settings-ben, a felső képerny - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
min. max.nincs böngészővan böngészőMűvelet
1.0.02.0.0Használj egy módszert a "Minden verzió" című sorból
2.1.02.1.0Használj egy módszert a "Minden verzió" című sorbólInstalling boot9strap (2xrsa)
2.2.02.2.0Használj egy módszert a "Minden verzió" című sorból
3.0.08.1.0boot9strap telepítése (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Használj egy módszert a "Minden verzió" című sorbólBoot9strap telepítése (Soundhax)
11.8.011.8.0boot9strap telepítése (DSiWare)
11.4.011.14.0Boot9strap telepítése (safecerthax)
MINDEN VERZIÓ

ntrboot
(Kompatibilis flashkártya szükséges)

or

boot9strap telepítése (Hardmod)
(Forrasztás szükséges)

ntrboot
(Kompatibilis flashcart szükséges)

or

Boot9strap telepítése (Hardmod)
(forrasztást igényel)
\ No newline at end of file + diff --git a/_pages/hu_HU/get-started.txt b/_pages/hu_HU/get-started.txt index 3272d723cb..6958fe95ee 100644 --- a/_pages/hu_HU/get-started.txt +++ b/_pages/hu_HU/get-started.txt @@ -6,85 +6,16 @@ title: "Kezdeti lépések" ### Fontos tudnivalók -Válaszd ki a te verziódhoz tartozó oldalt a lenti táblázatból. Vedd figyelembe, hogy a "min." és a "max." mezőkbe a határok is beleértendők. Ez azt jelenti, hogy például a "minimum 9.0.0, maximum 9.2.0" sorba a 9.0.0, a 9.1.0 és a 9.2.0 is beleértendő. - -Az eszközöd verziója megtalálható a System Settings-ben, a felső képernyő jobb alsó sarkában. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**Ha nem tudod követni a készüléked verziószámához tartozó utasításokat, mert a hozzájuk tartozó követelményeket nem teljesíted, akkor vagy frissíts a legfrissebb verzióra vagy lásd a "Minden verzió" című sort, ahol olyan módszereket találsz, amelyek rendszerverziótól függetlenül működnek.** - -Minden verzió esetében lehetőséged van [kártyáról](cart-update) (vagy sima System Update-tel) frissíteni egy jelenleginél újabb verzióra, hogy az ahhoz tartozó útmutatót követhesd, maradva a megfelelő oszlopban. - -Ha már hackelted a 3DS-edet korábban, és rendelkezel EmuNAND-ra telepített CFW-vel, csak kövesd a soron következő utasításokat SysNAND használatával. Közben cserélj le bármilyen fájlt, ami már létezik. Az adataidat átköltöztetjük majd az EmuNAND-ról az új B9S installációd alá a legvégén. Ha menuhax-szet használsz, az útmutató megkezdése előtt azt el kell távolítanod; ehhez [töröld a Home Menu extdata-ját](troubleshooting#clear-home-menu-extdata). - -Ez az oldal boot9strap gyári állapotú 3DS-re vagy 2DS-re történő telepítéséhez ad útmutatást. Ha már rendelkezel telepített arm9loaderhax-szel, és szeretnél boot9strap-re frissíteni, kövesd az [A9LH-ről B9S-re](a9lh-to-b9s) című útmutatót. -{: .notice--primary} - -Mielőtt belekezdenénk, a Windows felhasználóknak engedélyezniük kell a fájlkiterjesztések mutatását a [Fájlkiterjesztések (Windows)](file-extensions-(windows)) útmutató szerint! -{: .notice--info} - -Mielőtt elkezdenéd, tanácsos leellenőriztetni az SD kártyádát valamelyik programmal az alábbiak közül: [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), vagy [F3X (Mac)](f3x-(mac))! +Ha korábban már hackelted a 3DS-ed a múltban, vagy a 3DS-t másodkézből vetted, akkor elképzelhető, hogy a konzolod már rendelkezik custom firmware-rel. Érdemes megnézned a[CFW ellenőrzését](checking-for-cfw) mielőtt folytatod. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +A különböző készülék modellek, verziók, és régiók különböző lépéseket követelnek meg, hogy elérd a végső célt, a boot9strap alapú egyedi firmware-t. Ez az oldal segít megtalálni a készüléked számára megfelelő útmutatót. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +A képeken látható eszközök színe eltérő lehet, viszont jól figyelj a gombok elhelyezésére és egy-egy készülék modell jellegzetességeire, hogy biztosan a neked megfelelőt válaszd. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Kattints a készüléked képére, hogy a megfelelő oldalra juss. -
{{ notice-1 | markdownify }}
- -### Verziótáblázat - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
min.max.Action
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
MINDEN VERZIÓ

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS vagy New 2DS | Old 3DS vagy Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/hu_HU/godmode9-usage.txt b/_pages/hu_HU/godmode9-usage.txt index 762e269f9d..a1dc727e41 100644 --- a/_pages/hu_HU/godmode9-usage.txt +++ b/_pages/hu_HU/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 használata" {% include toc title="Tartalomjegyzék" %} -Ha segítségre van szükséged GodMode9-nal kapcsolatban (angol nyelven), legyen az scriptelés, vagy a legfrissebb információk beszerzése, csatlakozz a [GodMode9 Discord szerverhez](https://discord.gg/EGu6Qxw). +Ha segítségre van szükséged GodMode9-nal kapcsolatban (angol nyelven), legyen az scriptelés, vagy a legfrissebb információk beszerzése, csatlakozz a [GodMode9 Discord szerverhez](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Fontos tudnivalók @@ -22,9 +22,9 @@ A lentebbi utasítások egy része csak a legfrissebb GodMode9-on érhető el, e ### Amire szükséged lesz -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* A [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) v1.9.2pre1 kiadása -### Utasítások +### Lépések 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe diff --git a/_pages/hu_HU/h2testw-(windows).txt b/_pages/hu_HU/h2testw-(windows).txt index 758581fcbc..b15d06d0c2 100644 --- a/_pages/hu_HU/h2testw-(windows).txt +++ b/_pages/hu_HU/h2testw-(windows).txt @@ -16,7 +16,7 @@ Ez az oldal Windows felhasználókra vonatkozik. Ha nem Windowsod van, nézd meg * A [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip) legújabb kiadása -### Utasítások +### Lépések 1. Másold a `h2testw.exe`-t a h2testw `.zip`-ből az asztalra 1. Helyezd az SD kártyád a számítógépbe diff --git a/_pages/hu_HU/home.txt b/_pages/hu_HU/home.txt index 1c61bc86ce..df3a59c7b9 100644 --- a/_pages/hu_HU/home.txt +++ b/_pages/hu_HU/home.txt @@ -37,7 +37,7 @@ Ennek az útmutatónak a *te* segítségedre is szüksége van, hogy [ezek]({{ " ## Mi az a Homebrew? -[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. Ebbe beleértendők homebrew segédeszközök, alkalmazások, játékok és emulátorok. +[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) általában olyan szoftvert jelent, ami nem jóváhagyott a Nintendo által. Ebbe beleértendők homebrew segédeszközök, alkalmazások, játékok és emulátorok. Sok esetben a homebrew alkalmazások futtatása a készülékeden 100%-ban ingyenesen megoldható csak Nintendo 3DS Sound alkalmazással. Ezen kívül sok más exploit is található játékokban és a böngészőben, amivel futtatható homebrew. @@ -50,7 +50,7 @@ CFW telepíthető bármelyik konzolra, azon belül bármilyen verzióra (de elk ## Mit fogsz telepíteni ezzel az útmutatóval? Ennek az útmutatónak az a célja, hogy egy teljesen módosítatlan, gyári állapotú 3DS firmware-jét -bootstrap9 alapú egyedi firmware-re cseréljük. Néhány verzió esetében ez alkalmaz homebrew-t belépési pontként, de ezeknél is az egyedi firmware a végcél. +boot9strap alapú egyedi firmware-re cseréljük. Néhány verzió esetében ez alkalmaz homebrew-t belépési pontként, de ezeknél is az egyedi firmware a végcél. A boot9strap a legújabb és legjobb módszer arra, hogy egyedi firmware-t indítsunk a készülékünkön, amivel teljes irányítást szerezhetünk afölött a boot folyamat már első néhány ezredmásodpercében, ami hasonló a BootMii működéséhez a Wii-n. Ez még annál is korábbi irányítást ad nekünk, mint amit az arm9loaderhax biztosított, és ellentétben a szokványos sighax-szel, a boot9strap egy NDMA felülírási exploitot használ arra, hogy átvegye az irányítást a Boot9 kódvégrehajtás fölött. Ez azt jelenti, hogy bármely konzol, ami boot9strap-et futtat, képes kimenteni a konzol egyedi OTP-jét (`OTP.bin`), az ARM11 bootromot (`boot11.bin`), és az ARM9 bootromot (`boot9.bin`). @@ -63,8 +63,8 @@ Az összes kiszámított sighax szignatúra megtalálható [ebben a gist-ben](ht ## Mit tudok csinálni egy egyedi firmware-rel? + Játszhatsz bármilyen játékkártyával és eShop játékkal, régiótól függetlenül -+ Egyedivé teheted a HOME Menüdet más felhasználók által készített [témákkal és nyitóképekkel (splash screen-ekkel)](https://themeplaza.eu/) -+ Használtod az általad birtokolt játékok "ROM hackeit" ++ Egyedivé teheted a HOME Menüdet más felhasználók által készített [témákkal és nyitóképekkel (splash screen-ekkel)](https://themeplaza.art/) ++ Használhatod az általad birtokolt játékok "ROM hackeit" + Csinálhatsz játékokról és alkalmazásokról képernyőképet + Menthetsz, szerkeszthetsz és visszaállíthatsz mentéseket sok-sok játékhoz + Játszhatsz régebbi konzolokhoz készült játékokkal sokféle emulátor segítségével, legyen az a RetroArch, vagy bármely más, önálló emulátor. (Legjobban a New Nintendo 3DS esetén működik.) @@ -78,12 +78,12 @@ Az összes kiszámított sighax szignatúra megtalálható [ebben a gist-ben](ht + **Az útmutató megkezdése előtt fontos, hogy ismerd a 3DS hackelésének kockázatait: MINDEN alkalommal, amikor módosítod a rendszeredet, ott van az esélye egy VISSZAFORDÍTHATATLAN brickelődésnek (a konzol használhatatlanná válásának). Ritka az ilyesmi, de annak ellenére lehetséges, tehát mindig bizonyosodj meg róla, hogy MINDEN utasítást PONTOSAN követsz.** + Ha hackelted már meg a 3DS-edet korábban, EmuNAND telepítése céljából, és szeretnéd ennek tartalmát az új SysNAND CFW-re áthozni, kövesd ugyanúgy az utasításokat, majd állítsd vissza a már létező EmuNAND-odat, amikor a [telepítés véglegesítésének](finalizing-setup) megfelelő részénél tartasz. -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ Ez az útmutató működik New 3DS, Old 3DS, New 2DS, és Old 2DS eszközökön. minden régió és verzió esetén beleértve a legutolsó verziót is (11.14.0). + Ha minden a terv szerint halad, nem fogsz semmilyen adatot elveszíteni, és a folyamat végén meglesz minden, ami korábban ott volt (játékok, NNID, mentések, stb. nem fognak elveszni). + Tartsd a készülékedet töltőn a teljes folyamat során, hogy elkerüld az adatvesztést vagy bármilyen kárt, ami egy nem várt kikapcsolásból adódhat! -+ Az SD kártyád partíciós táblájának [MBR, és nem GPT](http://www.howtogeek.com/245610/) formátumúnak kell lennie (a készülékedhez csomagolt SD kártya gyárilag MBR formátumú lesz). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ Ha egy vadonatúj SD kártyát kell formáznod, használhatod a [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) nevű programot, a lemezfoglalási egység méretét (Allocation Unit Size) pedig állítsd 32K-ra (32768). -+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ++ Az SD kártyád partíciós táblájának [MBR, és nem GPT](http://www.howtogeek.com/245610/) formátumúnak kell lennie (a készülékedhez csomagolt SD kártya gyárilag MBR formátumú lesz). A legkönnyebb módja ennek tesztelésére, ha kipróbálod, hogy az SD kártya működik-e a 3DS-edben. Ha működik, a kártya MBR. +Ha az új SD kártyádat formáznod kell FAT32-re, akkor használl ezeket az eszközöket: [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), vagy [cfdisk (Linux)](formatting-sd-(linux)). ++ Az Old 2DS tulajdonképpen azonos az Old 3DS-sel a szoftverek tekintetében, míg a New 2DS tulajdonképpen azonos a New 3DS-sel a szoftverek tekintetében. Minden lépés ami "Old 3DS" egyben vonatkozik az Old 2DS-sre és minden lépés ami "New 3DS"-re hivatkozik, vonatkozik a New 2DS-re is. ___ diff --git a/_pages/hu_HU/homebrew-launcher-(alternatives).txt b/_pages/hu_HU/homebrew-launcher-(alternatives).txt index a78fdfbf16..64e77e82bb 100644 --- a/_pages/hu_HU/homebrew-launcher-(alternatives).txt +++ b/_pages/hu_HU/homebrew-launcher-(alternatives).txt @@ -6,7 +6,7 @@ title: "Homebrew Launcher (alternatívák)" ### Fontos tudnivalók -This udsploit/safehax exploit is compatible with versions 9.0.0 through 11.3.0. +Ez a udsploit/safehax exploit a 9.0.0-11.3.0 verziókkal kompatibilis. A Homebrew Launcher több, különböző belépési ponttal rendelkezik, azaz módszerrel arra, hogy elindítsuk. @@ -25,7 +25,7 @@ Ahhoz, hogy kicsomagold az oldalon található `.7z` fájlokat, egy fájl archiv * A [udsploit](https://github.com/smealum/udsploit/releases/latest) legújabb kiadása * A [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) legújabb kiadása *(a `.7z` fájl)* -### Utasítások +### Lépések 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe @@ -81,5 +81,5 @@ Ahhoz, hogy kicsomagold az oldalon található `.7z` fájlokat, egy fájl archiv ![]({{ "/images/screenshots/homebrew-launcher.png" | absolute_url }}) {: .notice--info} -### Continue to [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) +### Továbblépés a [Boot9strap telepítésére (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) {: .notice--primary} diff --git a/_pages/hu_HU/homebrew-launcher-(browserhax-2020).txt b/_pages/hu_HU/homebrew-launcher-(browserhax-2020).txt index c1ab168230..f65b72f178 100644 --- a/_pages/hu_HU/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/hu_HU/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Tartalomjegyzék" %} - -### Fontos tudnivalók - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### Amire szükséged lesz - -* A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) legújabb kiadása -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Utasítások - -#### Első rész - Előkészületek - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Várd meg, amíg a folyamat befejeződik - + If it displays a yellow screen, power your console off, then try this section again -1. Ha az exploit sikeres volt, a készülékednek ezt követően be kell töltenie a Homebrew Launchert - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +Ez az oldal el lett távolítva, mert a használlt módszer már elavult. Kérlek használj egy modern módszert a [Kezdeti Lépések](get-started) oldalról. +{: .notice--warning} diff --git a/_pages/hu_HU/homebrew-launcher-(pichaxx).txt b/_pages/hu_HU/homebrew-launcher-(pichaxx).txt index ddc78d1421..bdbc25ca81 100644 --- a/_pages/hu_HU/homebrew-launcher-(pichaxx).txt +++ b/_pages/hu_HU/homebrew-launcher-(pichaxx).txt @@ -4,51 +4,55 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Tartalomjegyzék" %} +A Seedminer alapú metódusok könnyebb, biztonságosabb metódusokkal kerültek helyettesítésre. Menj vissza a [Kezdeti lépések](get-started) oldalra, kivéve, ha valós okod van, ennek az oldalnak a használatára (mint például hibás váll-gombok). +{: .notice--warning} + ### Fontos tudnivalók -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. +Ez a metódusa a Seedminer használatának a további exploitoláshoz használja a `movable.sed` fájlod, hogy hozzáférést szerezzen a Homebrew Launcher-hez a PicHaxx exploittal, azzal az céllal, hogy beinjektáljon egy exploitolható DSiWare címet a DS Download Play alkalmazásba. Ehhez a metódushoz szükséges, hogy birtokold (vagy letöltsd) az ingyenes "Pokemon Picross" játékot az eShop-ból. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +Ha az eszközödnek már van hozzáférése a Homebrew Launcher-hez (mindegy, hogy PicHaxx vagy más exploit) akkor tovább léphetsz a [Frogtool](installing-boot9strap-(frogtool))-ra. {: .notice--success} -If you already have Pokemon Picross, this process will overwrite your game's save file! +Ha már megvan a Pokemon Picross, ez a folyamat felül fogja írni a mentés fájlod! {: .notice--warning} ### Amire szükséged lesz -* The free eShop game "Pokemon Picross" -* Your `movable.sed` file from completing [Seedminer](seedminer) +* Az ingyenes "Pokemon Picross" eShop játékra +* A `movable.sed` fájl a [Seedminer](seedminer)-ből * A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) legújabb kiadása -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* Az [otherapp payload](https://smealum.github.io/3ds/#otherapp)-ra *(a készüléked verziójának és régiójának megfelelő változatra)* + Ha az aktuális verziód 11.14.0-46, akkor válaszd a 11.13.0-45-öt verziódnak -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Másold az `boot.3dsx` fájlt az SD kártyád gyökerébe 1. Másold az otherapp payloadot az SD kártyád gyökerébe, majd nevezd át `otherapp.bin` névre - + if you do not see the `.bin` extension, do not add it to the end of the filename + +Ha nem látod a `.bin` kiterjesztést ne add kézzel hozzá a fájl végéhez 1. Hozz létre egy mappát `3ds` néven az SD kártyád gyökerében, ha még nem létezik ilyen -#### Section II - PicHaxx +#### II. rész - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer -1. Select your `movable.sed` file -1. Select "Build and Download" +1. Nyisd meg [a PicHaxx Injector weboldalát](nhnarwhal.com/3dstools/pichaxx.php/) a számítógépen +1. Válaszd ki a `movable.sed` fájlod +1. Válaszd a "Build and Download" menüpontot 1. Várd meg, amíg a folyamat befejeződik -1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card - + Overwrite the old save file when prompted +1. Navigálj a `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` útvonalra az SD kártyán + + Az `` ugyanaz, mint amit a [Seedminer](seedminer)-nél használtál + + Az `` egy 32 karakter hosszú nevű mappa az `` mappában +1. Másold az épp letöltött `00000001.sav` fájlt a `data` könyvtárba az SD kártyán + + Írd felül a régi mentés fájlt, ha kérdezi 1. Tedd vissza az SD kártyád a készülékedbe -1. Kapcsold be a készülékedet -1. Launch "Pokemon Picross" +1. Kapcsoljd be a készüléked +1. Indítsd el a "Pokemon Picross"-t 1. Ha az exploit sikeres volt, a készülékednek ezt követően be kell töltenie a Homebrew Launchert - + You may see an error stating there are no applications found. -1. Power off your device. + + Elképzelhető, hogy hibát kapsz arról, hogy nem találhatók alkalmazások +1. Kapcsold ki a készüléked ___ -### Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) +### Továbblépés a [Boot9strap telepítésére (Frogtool)](installing-boot9strap-(frogtool)) {: .notice--primary} diff --git a/_pages/hu_HU/homebrew-launcher-(soundhax).txt b/_pages/hu_HU/homebrew-launcher-(soundhax).txt index 9f28bd58a5..15f504700f 100644 --- a/_pages/hu_HU/homebrew-launcher-(soundhax).txt +++ b/_pages/hu_HU/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Bizonyosodj meg róla, hogy az eszközödön engedélyezve van a vezeték nélk Vedd figyelembe, hogy a kártyafrissítések csak a legfontosabb dolgokat frissítik, mint például a System Settings, Home Menu, stb. a kártyafrissítések nem fogják frissíteni a Nintendo 3DS Sound alkalmazást és a Hálózati funkciókat, mint például a System Transfer, Internet Browser, StreetPass Mii Plaza, vagy az eShop. -Ez azt jelenti, hogy kártyafrissítés egy olyan verzióról, amelyhez régebbi verziójú Nintendo 3DS Sound alkalmazás tartozott *(<3.0.0)* egy olyan verzióra, amihez újabb Nintendo 3DS Sound tartozik, működésképtelenné teszi a Soundhax-ot! [Más módszerre](homebrew-launcher-(alternatives)) lesz szükséged ahhoz, hogy használhasd a Homebrew Launchert! +Ez azt jelenti, hogy kártyafrissítés egy olyan verzióról, amelyhez régebbi verziójú Nintendo 3DS Sound alkalmazás tartozott *(<2.1.0)* egy olyan verzióra, amihez újabb Nintendo 3DS Sound tartozik, működésképtelenné teszi a Soundhax-ot! [Más módszerre](homebrew-launcher-(alternatives)) lesz szükséged ahhoz, hogy használhasd a Homebrew Launchert! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,21 +24,22 @@ Ez azt jelenti, hogy kártyafrissítés egy olyan verzióról, amelyhez régebbi ### Amire szükséged lesz * A [Soundhax](http://soundhax.com) legújabb kiadása *(a régiódnak, készülékednek és rendszer verziódnak megfelelő változat)* + + Ha a Soundhax a böngésződben nem lejátszható videónak tűnik, nyomj Ctrl+S vagy Cmd+S gombokat a gépedre mentéséhez * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* * A [safehax](https://github.com/TiniVi/safehax/releases/latest) legújabb kiadása *(a`.3dsx` fájl)* * A [udsploit](https://github.com/smealum/udsploit/releases/latest) legújabb kiadása -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója * Az [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(a készüléked verziójának és régiójának megfelelő változat)* -### Utasítások +### Lépések 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe 1. Hozz létre egy mappát `3ds` néven az SD kártyád gyökerében, ha még nem létezik ilyen 1. Másold a Soundhax `.m4a` fájlját az SD kártyád gyökerébe 1. Másold az otherapp payloadot az SD kártyád gyökerébe, majd nevezd át `otherapp.bin` névre -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében 1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába 1. Másold a `safehax.3dsx`-et az SD kártyád `/3ds/` mappájába @@ -72,5 +73,5 @@ Ez azt jelenti, hogy kártyafrissítés egy olyan verzióról, amelyhez régebbi ___ -### Continue to [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) +### Továbblépés a [Boot9strap telepítésére (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) {: .notice--primary} diff --git a/_pages/hu_HU/homebrew-launcher-(steelhax).txt b/_pages/hu_HU/homebrew-launcher-(steelhax).txt index 9451c7b1f3..0da750bd52 100644 --- a/_pages/hu_HU/homebrew-launcher-(steelhax).txt +++ b/_pages/hu_HU/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Tartalomjegyzék" %} - -### Fontos tudnivalók - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +Ez az oldal el lett távolítva, mert a használt módszer már elavult. Kérlek használj egy modern módszert a [Kezdeti Lépések](get-started) oldalról. {: .notice--warning} - -### Amire szükséged lesz - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) legújabb kiadása -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Utasítások - -#### Első rész - Előkészületek - -1. Hozz létre egy mappát `3ds` néven az SD kártyád gyökerében, ha még nem létezik ilyen -1. Másold az `boot.3dsx` fájlt az SD kártyád gyökerébe -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Kapcsold ki a készüléked -1. Helyezd az SD kártyád a számítógépbe -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Nyomd meg a "Start!" gombot -1. Várd meg, amíg a folyamat befejeződik -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Tedd vissza az SD kártyád a készülékedbe -1. Kapcsold be a készülékedet -1. Launch "Steel Diver: Sub Wars" -1. Ha az exploit sikeres volt, a készülékednek ezt követően be kell töltenie a Homebrew Launchert - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/hu_HU/installing-boot9strap-(2xrsa).txt b/_pages/hu_HU/installing-boot9strap-(2xrsa).txt index 65f0f74de8..060e46827c 100644 --- a/_pages/hu_HU/installing-boot9strap-(2xrsa).txt +++ b/_pages/hu_HU/installing-boot9strap-(2xrsa).txt @@ -1,5 +1,5 @@ --- -title: "boot9strap telepítése (2xrsa)" +title: "Boot9strap telepítése (2xrsa)" --- {% include toc title="Tartalomjegyzék" %} @@ -8,15 +8,15 @@ title: "boot9strap telepítése (2xrsa)" * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása * A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* A [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) legújabb kiadása -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében 1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába 1. Másold az `arm9.bin` és az `arm11.bin` fájlokat a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe @@ -27,7 +27,7 @@ title: "boot9strap telepítése (2xrsa)" 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet -#### Második rész - A SafeB9SInstaller indítása +#### II. rész - A SafeB9SInstaller indítása 1. Indítsd el a webböngészőt a készülékeden, majd nyisd meg az alábbi URL-t: + `http://2xrsa.hacks.guide` @@ -37,13 +37,13 @@ title: "boot9strap telepítése (2xrsa)" + Ha egyéb hibát kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#a-browser-based-exploit-is-not-working) 1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert -#### Harmadik rész - boot9strap telepítése +#### III. rész - boot9strap telepítése 1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/hu_HU/installing-boot9strap-(browser).txt b/_pages/hu_HU/installing-boot9strap-(browser).txt index b808ea526c..dc504cb6c1 100644 --- a/_pages/hu_HU/installing-boot9strap-(browser).txt +++ b/_pages/hu_HU/installing-boot9strap-(browser).txt @@ -1,56 +1,60 @@ --- -title: "boot9strap telepítése (böngésző)" +title: "Boot9strap telepítése (böngésző)" --- {% include toc title="Tartalomjegyzék" %} +### Fontos tudnivalók + +A new-browserhax-xl (amikor universal-otherapp-pal kombináljuk) kompatibilis 11.14.0 verzióval New 3DS-en és New 2DS-en minden régió esetén. + +Ez az exploit nem működik az Old 3DS, Old 3DS XL, vagy Old 2DS verziókon. Mielőtt folytatnád, kérjük ellenőrizd, hogy a moddolandó eszközöd New 3DS, New 3DS XL, vagy New 2DS XL. +{: .notice--info} + ### Amire szükséged lesz +* A [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) legújabb kiadása * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Másold az `otherapp.bin`-t az SD kártyád gyökerébe, majd nevezd át `arm11code.bin` névre + +Ha nem látod a `.bin` kiterjesztést ne add kézzel hozzá a fájl végéhez +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében -1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába -1. Másold a `SafeB9SInstaller.dat` és a `Launcher.dat` fájlokat a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `boot9strap` mappájába +1. Másold át a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet -#### Második rész - A SafeB9SInstaller indítása +#### II. rész - A SafeB9SInstaller indítása -1. Indítsd el a webböngészőt a készülékeden, majd nyisd meg az alábbi URL-ek egyikét - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Kapcsold be a készülékedet +1. A HOME menüben nyomd meg a bal és jobb váll gombokat egyszerre, hogy megnyisd a kamerát + + Ha nem tudod megnyitni a kamerát, nyisd meg az Internet Browser-t kézzel, és írd be az URL-t e helyett. (`https://zoogie.github.io/web/nbhax-xl/`) +1. Érintsd meg a QR Code gombot és olvasd le [ezt a QR kódot](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + Ha hibát kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#a-browser-based-exploit-is-not-working) 1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert -#### Harmadik rész - boot9strap telepítése +#### III. rész - boot9strap telepítése 1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) 1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + **"Show NAND or user string in System Settings"** 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot - + Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon ___ diff --git a/_pages/hu_HU/installing-boot9strap-(fredtool).txt b/_pages/hu_HU/installing-boot9strap-(fredtool).txt index ab02bebb70..057c09782a 100644 --- a/_pages/hu_HU/installing-boot9strap-(fredtool).txt +++ b/_pages/hu_HU/installing-boot9strap-(fredtool).txt @@ -1,99 +1,102 @@ --- -title: "Installing Boot9strap (Fredtool)" +title: "Boot9strap telepítése (Fredtool)" --- {% include toc title="Tartalomjegyzék" %} +A Seedminer alapú metódusok könnyebb, biztonságosabb metódusokkal kerültek helyettesítésre. Menj vissza a [Kezdeti lépések](get-started) oldalra, kivéve, ha valós okod van, ennek az oldalnak a használatára (mint például hibás váll-gombok). +{: .notice--warning} + ### Fontos tudnivalók -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. +Ez a metódusa a Seedminer használatának a további exploitoláshoz használja a `movable.sed` fájlod, hogy dekriptáljon egy DSiWare címet, azzal az céllal, hogy beinjektáljon egy exploitolható DSiWare címet a DS Download Play alkalmazásba. Ez igényli, hogy rendelkezzél egy DSiWare mentéssel, például a BannerBomb-ból vagy a DSiWare Dumper eszközből. Ez egy jelenleg működő megvalósítása a "FIRM partitions known-plaintext" néven ismert exploitnak, amiről részletesebben olvashatsz [itt](https://www.3dbrew.org/wiki/3DS_System_Flaws). ### Amire szükséged lesz -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) +* Egy DSiWare mentésre (az SD gyökérben a [BannerBomb3](bannerbomb3))-ból +* A `movable.sed` fájlodra a [Seedminer](seedminer)-ből +* A [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) legújabb kiadása * A [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) legújabb kiadása -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Másold a `boot.nds` (B9STool) fájlt az SD kártyád gyökerébe -1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card +1. Másold át a `private` mappát a Frogminer_save `.zip`-ből az SD kártyád gyökerébe -#### Section II - Fredtool +#### II. rész - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer -1. Select your `movable.sed` file for the "Your movable.sed" field -1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field +1. Nyisd meg a [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php)-t a számítógépeden +1. Válaszd ki a `movable.sed` fájlodat a "Your movable.sed" mezőben +1. Válaszd ki a DSiWare mentést (`<8-character-id>.bin`) fájlt a "Your dsiware.bin" mezőben 1. Teljesítsd a "Nem vagyok robot" captchát -1. Select "Start" +1. Válaszd a "Start"-ot 1. Várd meg, amíg a folyamat befejeződik -1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) -1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder -1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder +1. Amikor a folyamat befejeződött, töltsd le a módosított DSiWare archívot az oldalról + + Ez a fájl két DSiWare mentést tartalmaz, egy tisztát (módosítatlan) és egy hax-ot (exploitált) +1. Navigálj a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` mappába az SD kártyán + + Az `` ugyanaz, mint amit a [Seedminer](seedminer)-nél használtál + + Az `` egy 32 karakter hosszú nevű mappa az `` mappában + + Ha a `Nintendo DSiWare` mappa nem létezik, hozd létre az `` mappában +1. Másold a `42383841.bin` fájlt az `output/hax/` mappájából a letöltött DSiWare csomagból (`fredtool_output.zip`) a `Nintendo DSiWare` mappába 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet 1. Lépj be a System Settings-be a készülékeden 1. Navigálj ide: `Data Management` -> `DSiWare` -1. Under the "SD Card" section, select the "Haxxxxxxxxx!" title +1. Az "SD Card" szekcióban válaszd a "Haxxxxxxxxx!" címet 1. Válaszd a "Copy"-t, majd az "OK"-t -1. Return to main menu of the System Settings -1. Navigate to `Internet Settings` -> `Nintendo DS Connections`, then select "OK" -1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio +1. Térj vissza a System Settings főmenüjébe +1. Navigálj az `Internet Settings` -> `Nintendo DS Connections` opcióhoz, majd válaszd az "OK"-t +1. Ha az exploit sikeres volt, a készülékednek ezt követően be kell töltenie a JPN verzióját a Flipnote Studio-nak -#### Section III - Flipnote Exploit +#### III. rész - Flipnote Exploit -If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/). +Ha inkább egy vizuális útmutatót szeretnél ehhez a fejezethez, [itt](https://zoogie.github.io/web/flipnote_directions/) elérhető egy. {: .notice--info} -1. Complete the initial setup process for the launched game until you reach the main menu - + Select the left option whenever prompted during the setup process -1. Using the touch-screen, select the large left box, then select the box with an SD card icon -1. Once the menu loads, select the face icon, then the bottom right icon to continue -1. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen -1. Select the second button along the top with a film-reel icon -1. Scroll right until reel "3/3" is selected -1. Tap the third box with the letter "A" in it -1. Scroll left until reel "1/3" is selected -1. Tap the fourth box with the letter "A" in it -1. If the exploit was successful, your device will have loaded b9sTool -1. Using the D-Pad, move to "Install boot9strap" - + If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open Nintendo DS Connections and start over from the beginning of Section III -1. Press (A), then press START and SELECT at the same time to begin the process -1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device +1. Fejezd be a kezdeti telepítését az elindított játéknak, amíg el nem éri a fő menüt + + Válassza a bal opciót, ha kérdezi a telepítési folyamat során +1. Az érintőképernyőt használva válaszd ki a bal nagy dobozt, majd válaszd a dobozt az SD kártya ikonnal +1. Ha a menü betöltött válaszd az arc ikont utána, pedig a jobb alsó ikont a folytatáshoz +1. Nyomj (X)-et vagy (Fel)-t a D-Pad-on, attól függően mi jelenik meg a képernyőn +1. Válaszd a második gombot a film-szalag ikonnal +1. Görgess jobbra, amíg a 3/3 filmtekercs kiválasztásra kerül +1. Nyomd meg a harmadik dobozt benne az "A" betűvel +1. Görgess balra, amíg a 1/3 filmtekercs kiválasztásra kerül +1. Nyomd meg a negyedik dobozt benne az "A" betűvel +1. Ha az exploit sikeres volt, a készülékedek ezt követően be kell töltenie a b9sTool-t +1. A D-Pad-dal menj az "Install boot9strap" opcióra + + Ha kihagytál egy lépést a rendszer a home menübe kerülsz a boot9strap telepítése helyett, és meg kell nyitnod a Nintendo DS Connections-t és elölről kell kezdeni a harmadik rész elejétől +1. Nyomj (A)-t majd ezt követően START-ot és SELECT-et egyszerre a folyamat elkezdéséhez +1. Ha végzett és az alsó képernyő azt mondja "done." lépj ki a b9sTool-ból, majd kapcsold ki eszközöd + Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával - + If you see the Luma Configuration screen, continue with the guide without powering off + + Ha a Luma konfigurációs képernyőjét látod, folytasd az útmutatót kikapcsolás nélkül -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása 1. Indítsd el a készülékedet a (Select) lenyomva tartásával, hogy megjelenjen a Luma konfigurációs menüje + Ha problémába ütközöl a Luma konfigurációs menü elindításakor, [kövesd ezt a hibaelhárítási útmutatót](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) 1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + **"Show NAND or user string in System Settings"** 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + + Az eszközödnek kis várakozás után be kell töltenie a Home menüt. Ha fekete képernyőt kapsz, ami több mint 5 percig tart, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -#### Section V - Restoring DS Connection Settings +#### V. rész - A DS Connection Settings visszaállítása 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card - + Replace the existing `42383841.bin` file +1. Másold a `42383841.bin` fájlt az `output/clean/` mappájából a letöltött DSiWare csomagnak (`fredtool_output.zip`) a `Nintendo 3DS///Nintendo DSiWare/` mappába az SD kártyán + + Írd felül a létező `42383841.bin` fájlt 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet 1. Lépj be a System Settings-be a készülékeden 1. Navigálj ide: `Data Management` -> `DSiWare` -1. Under the "SD Card" section, select the "Nintendo DSi™" title +1. Az "SD Card" szekcióban válaszd a ""Nintendo DSi™" címet 1. Válaszd a "Copy"-t, majd az "OK"-t ___ diff --git a/_pages/hu_HU/installing-boot9strap-(frogtool).txt b/_pages/hu_HU/installing-boot9strap-(frogtool).txt index 7d33446ff3..0945d63340 100644 --- a/_pages/hu_HU/installing-boot9strap-(frogtool).txt +++ b/_pages/hu_HU/installing-boot9strap-(frogtool).txt @@ -1,12 +1,15 @@ --- -title: "Installing Boot9strap (Frogtool)" +title: "Boot9strap telepítése (Frogtool)" --- {% include toc title="Tartalomjegyzék" %} +A Seedminer alapú metódusok könnyebb, biztonságosabb metódusokkal kerültek helyettesítésre. Menj vissza a [Kezdeti lépések](get-started) oldalra, kivéve, ha valós okod van, ennek az oldalnak a használatára (mint például hibás váll-gombok). +{: .notice--warning} + ### Fontos tudnivalók -We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. +A Homebrew Launcher hozzáférést fogjuk használni, hogy futtassuk a Frogtool eszközt, annak érdekében, hogy injektáljuk az exploitolható japán verzióját a "Flipnote Studio" címnek, amit aztán arra használunk, hogy futtassuk a b9sTool-t és telepítsük a boot9strap-et. Ez egy jelenleg működő megvalósítása a "FIRM partitions known-plaintext" néven ismert exploitnak, amiről részletesebben olvashatsz [itt](https://www.3dbrew.org/wiki/3DS_System_Flaws). @@ -14,65 +17,85 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme ### Amire szükséged lesz -* Your `movable.sed` file from completing [Seedminer](seedminer) -* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) -* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) +* A `movable.sed` fájlodra a [Seedminer](seedminer)-ből +* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) +* A [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) legújabb kiadása * A [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) legújabb kiadása -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Helyezd az SD kártyád a számítógépbe -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card -1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card -1. Copy `frogcert.bin` to the root of your SD card +1. Másold a `movable.sed` fájlod az SD kártyád gyökerébe +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe +1. Másold át a `boot.nds`-t (b9sTool) a `b9sTool release `.zip`-ből az SD kártya gyökerébe +1. Másold a `Frogtool.3dsx` fájlt az SD kártyád `/3ds/` mappájába +1. Másold az `frogcert.bin` fájlt az SD kártyád gyökerébe 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet -#### Section II - Patching DS Download Play +#### II. rész - A DS Download Play patchelése -1. Open the Homebrew Launcher using any method -1. Launch Frogtool from the list of homebrew -1. Select the "INJECT patched DS Download Play" option -1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play -1. Once this operation has finished, read the screens and check if the process was successful - + If there are any errors or missing files, correct the problem and try again -1. If the process was successful, tap the touch screen, then select "BOOT patched DS Download Play" -1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio +1. Indítsd el a Homebrew Launcher-t bármelyik metódussal +1. Indítsd el az Frogtool-t a homebrew listából +1. Válassza az "INJECT patched DS Download Play" opciót +1. A Frogtool automatikusan futtatja és injektálja a JPN verzióját a Flipnote Studio-nak a DS Download Play-be +1. Ha a művelet lefutott, olvasd el a képernyőket és ellenőrizd, hogy a folyamat sikeres volt + + Ha voltak hibák vagy hiányzó fájlok, javítsd a problémát és próbáld újra +1. Ha a folyamat sikeres volt, akkor érintsd meg az érintőképernyőt és válaszd a "BOOT patched DS Download Play" opciót +1. Ha az exploit sikeres volt, a készülékednek ezt követően be kell töltenie a JPN verzióját a Flipnote Studio-nak -#### Section III - Flipnote Exploit +#### III. rész - Flipnote Exploit -If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/). +Ha inkább egy vizuális útmutatót szeretnél ehhez a fejezethez, [itt](https://zoogie.github.io/web/flipnote_directions/) elérhető egy. {: .notice--info} -1. Complete the initial setup process for the launched game until you reach the main menu - + Select the left option whenever prompted during the setup process -1. Using the touch-screen, select the large left box, then select the box with an SD card icon -1. Once the menu loads, select the face icon, then the bottom right icon to continue -1. Select the frog icon at the bottom left - + Alternatively, press (X) or (UP) on the D-Pad depending on which is shown on the top screen -1. Select the second button along the top with a film-reel icon -1. Scroll right until reel "3/3" is selected -1. Tap the third box with the letter "A" in it -1. Scroll left until reel "1/3" is selected -1. Tap the fourth box with the letter "A" in it -1. If the exploit was successful, your device will have loaded b9sTool -1. Using the D-Pad, move to "Install boot9strap" -1. Press (A), then press START and SELECT at the same time to begin the process -1. Once complete and the bottom screen says "done.", exit b9sTool, then power off your device +1. Fejezd be a kezdeti telepítését az elindított játéknak, amíg el nem éri a fő menüt + + Válaszd a bal opciót, ha kérdezi a telepítési folyamat során +1. Az érintőképernyőt használva válaszd ki a bal nagy dobozt, majd válaszd a dobozt az SD kártya ikonnal +1. Ha a menü betöltött válaszd az arc ikont utána, pedig a jobb alsó ikont a folytatáshoz +1. Válaszd a béka ikon bal oldalt alul + + Alternatívaként nyomj (X)-et vagy (Fel)-t a D-Pad-on, attól függően mi jelenik meg a képernyőn +1. Válaszd a második gombot a film-szalag ikonnal +1. Görgess jobbra, amíg a 3/3 filmtekercs kiválasztásra kerül +1. Nyomd meg a harmadik dobozt benne az "A" betűvel +1. Görgess balra, amíg a 1/3 filmtekercs kiválasztásra kerül +1. Nyomd meg a negyedik dobozt benne az "A" betűvel +1. Ha az exploit sikeres volt, a készülékednek ezt követően be kell töltenie a b9sTool-t +1. A D-Pad-dal menj az "Install boot9strap" opcióra +1. Nyomj (A)-t majd ezt követően START-ot és SELECT-et egyszerre a folyamat elkezdéséhez +1. Ha végzett és az alsó képernyő azt mondja "done." lépj ki a b9sTool-ból, majd kapcsold ki eszközöd + Elképzelhető, hogy kényszerítened kell a leállást a bekapcsológomb lenyomva tartásával - + If you see the Luma configuration menu, continue without powering off + + Ha a Luma konfigurációs képernyőjét látod, folytasd az útmutatót kikapcsolás nélkül -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása 1. Indítsd el a készülékedet a (Select) lenyomva tartásával, hogy megjelenjen a Luma konfigurációs menüje + Ha problémába ütközöl a Luma konfigurációs menü elindításakor, [kövesd ezt a hibaelhárítási útmutatót](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) 1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + **"Show NAND or user string in System Settings"** 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + + Az eszközödnek kis várakozás után be kell töltenie a Home menüt. Ha fekete képernyőt kapsz, ami több mint 5 percig tart, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### V. rész - A DS Download Play visszaállítása + +1. Indítsd el a Download Play alkalmazást (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Várj, amíg két gombot nem látsz + + Ne nyomd meg egyiket sem +1. Nyomd le az (L) + (D-Pad le) + (Select) gombokat egyszerre a Rosalina menü megnyitásához +1. Válaszd ki a "Miscellaneous options"-t +1. Válaszd a "Switch the hb. title to the current app." opciót +1. Nyomd meg a (B) gombot a folytatáshoz +1. Nyomd meg a (B) gombot, hogy visszakerülj a Rosalina főmenüjébe +1. Nyomd meg a (B) gombot, hogy kilépj a Rosalina menüből +1. Nyomd meg a (Home) gombot és zárd be a Download Play-t +1. Indítsd el újra a Download Play alkalmazást +1. Ekkor a készülékednek be kell töltenie a Homebrew Launchert +1. Indítsd el az Frogtool-t a homebrew listából +1. Válaszd az "RESTORE patched DS Download Play" opciót +1. Ha a művelet lefutott, olvasd el a képernyőket és ellenőrizd, hogy a folyamat sikeres volt + + Ha voltak hibák vagy hiányzó fájlok, javítsd a problémát és próbáld újra +1. Ha a folyamat sikeres volt, érintsd meg a képernyőt, majd nem meg a START gombot a kilépéshez ___ diff --git a/_pages/hu_HU/installing-boot9strap-(hardmod).txt b/_pages/hu_HU/installing-boot9strap-(hardmod).txt index a19f929d8d..5a6e89fdf1 100644 --- a/_pages/hu_HU/installing-boot9strap-(hardmod).txt +++ b/_pages/hu_HU/installing-boot9strap-(hardmod).txt @@ -1,5 +1,5 @@ --- -title: "boot9strap telepítése (Hardmod)" +title: "Boot9strap telepítése (Hardmod)" --- {% include toc title="Tartalomjegyzék" %} @@ -22,7 +22,7 @@ Ez működni fog a New 3DS, a New 2DS, az Old 3DS, és az Old 2DS konzolok *öss * A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* * A [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) legújabb kiadása + A Windows felhasználók használhatják az előre összeállított `.exe`-t, míg a Mac és Linux felhasználóknak [Python 3](https://www.python.org/downloads/)-ra lesz szükségük, hogy futtatni tudják a mellékelt `.py` szkriptet -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója * A készülékednek és a verziójának megfelelő `.firm`: | Verzió(k) | Kernel | Old 3DS vagy Old 2DS | New 3DS vagy New 2DS | @@ -56,13 +56,13 @@ Ez működni fog a New 3DS, a New 2DS, az Old 3DS, és az Old 2DS konzolok *öss | 11.4.0 - 11.7.0 | 2.54-0 | [2.54-0_11.4_OLD.firm](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.54-0_11.4_NEW.firm](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | | 11.8.0 - 11.11.0 | 2.55-0 | [2.55-0_11.8_OLD.firm](magnet:?xt=urn:btih:ee882a07afcf3f6acc676f8dc0ab25f291b643e0&dn=2.55-0%5F11.8%5FOLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) | [2.55-0_11.8_NEW.firm](magnet:?xt=urn:btih:97dc6ba91ed243596adb744cc20daa610c10fcab&dn=2.55-0%5F11.8%5FNEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) | -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Csomagold ki a hardmod-b9s-installer mappát a hardmod-b9s-installer `.zip`-ből 1. Másold az előbbiekben letöltött `.firm` fájlt a kicsomagolt hardmod-b9s-installer mappába 1. Nevezd át a hardmod-b9s-installer mappában található `.firm` fájlt `current.firm` névre @@ -71,7 +71,7 @@ Ez működni fog a New 3DS, a New 2DS, az Old 3DS, és az Old 2DS konzolok *öss 1. Készíts NAND biztonsági mentést a hardmodod segítségével 1. Másold a NAND biztonsági mentésedet a számítógépeden lévő hardmod-b9s-installer mappába és nevezd át `NAND.bin` névre -#### Második rész - boot9strap telepítése +#### II. rész - boot9strap telepítése 1. Futtasd a hardmod-b9s-installer-t + Windows felhasználóknak: Futtasd az `install-b9s.exe` fájlt @@ -81,7 +81,7 @@ Ez működni fog a New 3DS, a New 2DS, az Old 3DS, és az Old 2DS konzolok *öss 1. Válaszd le a hardmododat 1. Kapcsold be a készülékedet -#### Harmadik rész - Luma3DS konfigurálása +#### III. rész - Luma3DS konfigurálása 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt b/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt index 4d3561b202..d83f140efc 100644 --- a/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt +++ b/_pages/hu_HU/installing-boot9strap-(hbl-usm).txt @@ -1,83 +1,6 @@ --- -title: "Installing boot9strap (HBL-USM)" +title: "Boot9strap telepítése (HBL-USM)" --- -{% include toc title="Tartalomjegyzék" %} - -### Fontos tudnivalók - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Amire szükséged lesz - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Első rész - Előkészületek - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Harmadik rész - Luma3DS konfigurálása - -1. Your device should automatically show the Luma Configuration menu -1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: - + **"Show NAND or user string in System Settings"** -1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Indítsd el a Download Play alkalmazást -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Válaszd ki a "Miscellaneous options"-t -1. Válaszd a "Switch the hb. title to the current app." opciót -1. Nyomd meg a (B) gombot a folytatáshoz -1. Nyomd meg a (B) gombot, hogy visszakerülj a Rosalina főmenüjébe -1. Nyomd meg a (B) gombot, hogy kilépj a Rosalina menüből -1. Nyomd meg a (Home) gombot és zárd be a Download Play-t -1. Relaunch the Download Play application -1. Ekkor a készülékednek be kell töltenie a Homebrew Launchert -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Tovább a [telepítés véglegesítésére](finalizing-setup) -{: .notice--primary} +Ez az oldal el lett távolítva, mert a használlt módszer már elavult. Kérlek használj egy modern módszert a [Kezdeti Lépések](get-started) oldalról. +{: .notice--warning} diff --git a/_pages/hu_HU/installing-boot9strap-(mset).txt b/_pages/hu_HU/installing-boot9strap-(mset).txt index 99098b90fc..625ee4a1da 100644 --- a/_pages/hu_HU/installing-boot9strap-(mset).txt +++ b/_pages/hu_HU/installing-boot9strap-(mset).txt @@ -1,5 +1,5 @@ --- -title: "boot9strap telepítése (MSET)" +title: "Boot9strap telepítése (MSET)" --- {% include toc title="Tartalomjegyzék" %} @@ -9,15 +9,15 @@ title: "boot9strap telepítése (MSET)" * Bármilyen olyan DS flashkártya, ami támogatja a készüléked verzióját * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása * A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* A [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) legújabb kiadása -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében 1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába 1. Másold át a `SafeB9SInstaller.dat` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe @@ -29,7 +29,7 @@ title: "boot9strap telepítése (MSET)" 1. Másold a `SafeB9SInstaller.nds` fájlt a SafeB9SInstaller `.zip`-ből a DS flashkártyádra 1. Kapcsold be a készülékedet -#### Második rész - A SafeB9SInstaller indítása +#### II. rész - A SafeB9SInstaller indítása 1. Indítsd el a flashkártyádat az eszközödön 1. Bootold a `SafeB9SInstaller.nds` fájlt a flashkártyád segítségével @@ -39,13 +39,13 @@ title: "boot9strap telepítése (MSET)" 1. Indítsd újra a rendszert, majd nyisd meg a System Settings-et, válaszd az "Other Settings" opciót, majd a "Profile", végül a "Nintendo DS Profile" opciót 1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert -#### Harmadik rész - boot9strap telepítése +#### III. rész - boot9strap telepítése 1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt index fff3a5b973..4952d28d28 100644 --- a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt +++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt @@ -1,5 +1,5 @@ --- -title: "boot9strap telepítése (ntrboot)" +title: "Boot9strap telepítése (ntrboot)" --- {% include toc title="Tartalomjegyzék" %} @@ -13,28 +13,28 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme * Egy mágnes, ami alvó üzemmódot idéz elő a készülékedben (ha összecsukható modellel rendelkezel) * Egy flashkártya, amire korábban ntrboot-ot flasheltél * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked -1. Helyezd a készüléked SD kártyáját a számítógépbe +1. Helyezd a konzolod SD kártyáját a számítógépedbe + Ez a 3DS-ed SD kártyája, *nem* a flashkártyádé -1. Másold a `SafeB9SInstaller.firm` fájlt az SD kártyád gyökerébe, majd nevezd át `boot.firm` névre -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében -1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába +1. Másold a `SafeB9SInstaller.firm` fájlt a konzolod SD kártyájának gyökerébe, majd nevezd át `boot.firm` névre +1. Másold át a `boot.3dsx` fájlt a Luma3DS `.zip`-ből a konzolod SD kártyájának gyökerébe +1. Hozz létre egy mappát `boot9strap` néven a konzolod SD kártyájának a gyökerében +1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból a konzolod SD kártyájának `/boot9strap/` mappájába ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Tedd vissza az SD kártyád a készülékedbe +1. Tedd vissza az SD kártyád a 3DS-be 1. Kapcsold be a készülékedet -#### Második rész - ntrboot +#### II. rész - ntrboot 1. Használd a mágnest, hogy megtaláld azt a pontot a készülékeden, ahol az alvó módot kiváltó érzékelő található + Erre a lépésre nincsen szükség az Old 2DS esetében (amin van alvó üzemmód kapcsoló) @@ -46,7 +46,7 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme + Elképzelhető, hogy ez csak sokadjára sikerül csak a gombok elhelyezése miatt 1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert -#### Harmadik rész - boot9strap telepítése +#### III. rész - boot9strap telepítése 1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik 1. Vedd le a mágnest a készülékedről @@ -55,11 +55,11 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme 1. Ha ez elkészült, kényszerítsd a készülékedet leállásra a bekapcsológomb lenyomva tartásával + A készüléked csak addig fog a SafeB9SInstaller képernyőre bootolni, amíg a következő részt be nem fejezed -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása 1. Helyezd az SD kártyád a számítógépbe 1. Töröld a `boot.firm` fájlt az SD kártyád gyökeréből -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. Másold át a `boot.firm` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia @@ -82,7 +82,7 @@ Vedd figyelembe, hogy az Acekard 2i annak ellenére képes az `.nds` fájlok eli Ne hajtsd végre az itt leírt utasításokat mindaddig, amíg nem végeztél az ezeket megelőzőekkel az oldalon. -#### Ötödik rész - ntrboot eltávolítása +#### V. rész - ntrboot eltávolítása ##### Amire szükséged lesz @@ -118,7 +118,7 @@ Ne hajtsd végre az itt leírt utasításokat mindaddig, amíg nem végeztél az | **R4iSDHC RTS LITE 20XX** | | - [R4iSDHC_RTS_LITE_20XX-Flashrom.zip](magnet:?xt=urn:btih:543f90f7c50ee847af1d2152bdcbe76e7ed364e4&dn=R4iSDHC%5FRTS%5FLITE%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | | **R4iSDHC Dual-Core 20XX** | | - [R4iSDHC_Dual-Core_20XX-Flashrom.zip](magnet:?xt=urn:btih:be5b27b85dcb8a696191a1eddef478f7ab346e06&dn=R4iSDHC%5FDual-Core%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -##### Utasítások +##### Lépések 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe diff --git a/_pages/hu_HU/installing-boot9strap-(pichaxx).txt b/_pages/hu_HU/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..87215792b8 --- /dev/null +++ b/_pages/hu_HU/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Boot9strap telepítése (PicHaxx)" +--- + +{% include toc title="Tartalomjegyzék" %} + +A Seedminer alapú metódusok könnyebb, biztonságosabb metódusokkal kerültek helyettesítésre. Menj vissza a [Kezdeti lépések](get-started) oldalra, kivéve, ha valós okod van, ennek az oldalnak a használatára (mint például hibás váll-gombok). +{: .notice--warning} + +### Fontos tudnivalók + +Ez a metódusa Seedminer használatának további exploitolás céljából használja a `movable.sed` fájlt, hogy egy egyedi Pokémon Picross mentés fájlt írjon, amit már használhat az universal-otherapp a SafeB9Installer futtatására. + +### Amire szükséged lesz + +* A "Pokémon Picross" játék (ingyenes az eShop-ban) +* A `movable.sed` fájlodra a [Seedminer](seedminer)-ből +* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója +* A [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) legújabb kiadása + +### Lépések + +#### I. rész - Előkészületek + +1. Kapcsold ki a készüléked +1. Helyezd az SD kártyád a számítógépbe +1. Másold az `otherapp.bin` fájlt az SD kártyád gyökerébe +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe +1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében +1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába +1. Másold át a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe + +#### II. rész - PicHaxx + +1. Nyisd meg [a PicHaxx Injector weboldalát](nhnarwhal.com/3dstools/pichaxx.php/) a számítógépen +1. Válaszd ki a `movable.sed` fájlod +1. Válaszd a "Build and Download" menüpontot +1. Várd meg, amíg a folyamat befejeződik +1. Navigálj a `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` útvonalra az SD kártyán + + Az `` ugyanaz, mint amit a [Seedminer](seedminer)-nél használtál + + Az `` egy 32 karakter hosszú nevű mappa az `` mappában +1. Másold az épp letöltött `00000001.sav` fájlt a `data` könyvtárba az SD kártyán + + Írd felül a régi mentés fájlt, ha kérdezi +1. Tedd vissza az SD kártyád a készülékedbe +1. Kapcsold be a készülékedet +1. Indítsd el a "Pokemon Picross"-t +1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert + +#### III. rész - boot9strap telepítése + +1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik +1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et +1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához + +#### IV. rész - Luma3DS konfigurálása + +1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + + **"Show NAND or user string in System Settings"** +1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot + + Ha ezen a ponton hibát kapsz, csak folytasd az útmutatót a következő oldalon + +___ + +### Tovább a [telepítés véglegesítésére](finalizing-setup) +{: .notice--primary} diff --git a/_pages/hu_HU/installing-boot9strap-(safeb9sinstaller).txt b/_pages/hu_HU/installing-boot9strap-(safeb9sinstaller).txt index 6033488fdb..3ab60b203c 100644 --- a/_pages/hu_HU/installing-boot9strap-(safeb9sinstaller).txt +++ b/_pages/hu_HU/installing-boot9strap-(safeb9sinstaller).txt @@ -1,12 +1,12 @@ --- -title: "Installing boot9strap (SafeB9SInstaller)" +title: "boot9strap telepítése (SafeB9SInstaller)" --- {% include toc title="Tartalomjegyzék" %} -### Utasítások +### Lépések -#### Első rész - A SafeB9SInstaller indítása +#### I. rész - A SafeB9SInstaller indítása 1. Indítsd el a udsploit-ot a homebrew listából 1. Ha elkészült, nyomd meg a (Start) gombot, hogy kilépj a udsploit-ból @@ -18,13 +18,13 @@ title: "Installing boot9strap (SafeB9SInstaller)" + Ha lefagyna, kényszerítsd leállásra a konzolt a bekapcsológomb lenyomva tartásával, majd próbálkozz újra 1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert -#### Második rész - boot9strap telepítése +#### II. rész - boot9strap telepítése 1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához -#### Harmadik rész - Luma3DS konfigurálása +#### III. rész - Luma3DS konfigurálása 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/hu_HU/installing-boot9strap-(safecerthax).txt b/_pages/hu_HU/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..6075ec8453 --- /dev/null +++ b/_pages/hu_HU/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Boot9strap telepítése (safecerthax)" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +A safecerthax kompatibilis minden Old 3DS and Old 2DS eszközzel minden régióban. + +Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek, vagy az internet szolgáltatód reroutolja a DNS változásokat, egy alternatív metódust kell használnod, mint például a [Seedminer](seedminer). Ha támogatásra van szükséged az anyaggal kapcsolatosan, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, angolul, támogatást. +{: .notice--warning} + +Ez az exploit nem működik az New 3DS, New 3DS XL, vagy New 2DS XL verziókon. Mielőtt folytatnád, kérjük ellenőrizd, hogy a moddolandó eszközöd Old 3DS, Old 3DS XL, vagy Old 2DS. +{: .notice--info} + +### Amire szükséged lesz + +* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója + +### Lépések + +#### I. rész - Előkészületek +1. Kapcsold ki a készüléked +1. Helyezd az SD kártyád a számítógépbe +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe +1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében +1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `boot9strap` mappájába +1. Másold át a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe +1. Tedd vissza az SD kártyád a készülékedbe +1. Kapcsold be a készülékedet + +#### II. rész - safecerthax DNS +1. Indítsd el a System Settings alkalmazást +1. Navigálj az `Internet Settings` -> `Connection Settings` opciókhoz +1. Kattints a saját hálózati kapcsolatodra és navigálj a `Change Settings` -> `Next Page (jobb nyíl)` -> `DNS` opcióhoz +1. Állítsd az "Auto-Obtain DNS"-t "No"-ra majd kattints a `Detailed Setup`-ra +1. Állítsd a Primary DNS-t és a Secondary DNS-t az `054.038.133.070` címre +1. Kattints az OK-ra, majd kattints a Save-re +1. Amikor kérdezi, kattints a "Test"-re a kapcsolat ellenőrzéséhez + + A tesztnek sikeresnek kell lennie +1. Kapcsold ki a készüléked + +#### III. rész - safecerthax DNS +1. Az eszközöd kikapcsolt állapotában tartsd nyomva a következő gombokat: (Bal Váll) + (Jobb Váll) + (D-Pad Fel) + (A), majd nyomd meg a (Power)-t + + Tartsd nyomva a gombokat, amiíg a konzol be nem bootol a Safe Mode-ba +1. Nyomj "OK"-ot a frissítés elfogadásához + + Nincs frissítés. Ez része az exploitnak +1. Nyomj az "I accept"-re a feltételek elfogadásához + + A frissítésnek sikertelennek kell lennie, és egy üzenetnek kell megjelennie + + Ha a frissítés nem sikertelen, elképzelhető, hogy az internet szolgáltatód reroutolja a DNS változásokat. Próbálkozz másik internet kapcsolattal vagy kövess egy alternatív metódust, mint például a [Seedminer](seedminer). +1. Nyomj "OK"-ét a hibaüzenet bezárásához +1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert + + Ha a konzol lefagy vagy összeomlik, erőltetve kapcsold ki a konzolt és próbáld újra ezt a részt + +#### IV. rész - boot9strap telepítése + +1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik +1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et +1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához + +#### V. rész - Luma3DS konfigurálása + +1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + + **"Show NAND or user string in System Settings"** +1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot + +#### VI. rész - Az alapértelmezett DNS visszaállítása +1. Indítsd el a System Settings alkalmazást +1. Navigálj az `Internet Settings` -> `Connection Settings` opciókhoz +1. Kattints a saját hálózati kapcsolatodra és navigálj a `Change Settings` -> `Next Page (jobb nyíl)` -> `DNS` opcióhoz +1. Állítsd az "Auto-Obtain DNS"-t "Yes"-re +1. Kattints az OK-ra, majd kattints a Save-re +1. Amikor kérdezi, kattints a "Test"-re a kapcsolat ellenőrzéséhez + + A tesztnek sikeresnek kell lennie +1. Kapcsold ki a készüléked + +___ + +### Tovább a [telepítés véglegesítésére](finalizing-setup) +{: .notice--primary} diff --git a/_pages/hu_HU/installing-boot9strap-(soundhax).txt b/_pages/hu_HU/installing-boot9strap-(soundhax).txt index 772d403ffc..f9162b0f5c 100644 --- a/_pages/hu_HU/installing-boot9strap-(soundhax).txt +++ b/_pages/hu_HU/installing-boot9strap-(soundhax).txt @@ -1,48 +1,38 @@ --- -title: "boot9strap telepítése (Soundhax)" +title: "Boot9strap telepítése (Soundhax)" --- {% include toc title="Tartalomjegyzék" %} ### Fontos tudnivalók -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Vedd figyelembe, hogy a kártyafrissítések csak a legfontosabb dolgokat frissítik, mint például a System Settings, Home Menu, stb. A kártyafrissítések nem fogják frissíteni a Nintendo 3DS Sound alkalmazást és az olyan hálózati funkciókat, mint például a System Transfer, Internet Browser, StreetPass Mii Plaza, vagy az eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Így alternatív módszerre lesz szükséged a Homebrew Launcher telepítéséhez, mint a [boot9strap telepítése (böngésző)](installing-boot9strap-(browser)) vagy a [boot9strap telepítése (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+A Soundhax (amikor universal-otherapp-pal használjuk) kompatibilis az 1.0.0-s verziótól egészen a 11.3.0-ig minden régió esetén. ### Amire szükséged lesz * A [Soundhax](http://soundhax.com) legújabb kiadása *(a régiódnak, készülékednek és rendszer verziódnak megfelelő változat)* + + Ha a Soundhax a böngésződben nem lejátszható videónak tűnik, nyomj Ctrl+S vagy Cmd+S gombokat a gépedre mentéséhez * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) legújabb kiadása -* A [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) legújabb verziója *(a firmware verziódnak megfelelő `.bin` fájl)* +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója +* A [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) legújabb kiadása -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe 1. Másold a Soundhax `.m4a` fájlját az SD kártyád gyökerébe -1. Másold a pre9otherapp payloadot az SD kártyád gyökerébe, majd nevezd át `otherapp.bin` névre -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Másold az `boot.3dsx` fájlt az SD kártyád gyökerébe +1. Másold az `otherapp.bin` fájlt az SD kártyád gyökerébe +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe 1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében 1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába -1. Másold át az `arm9.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe +1. Másold át a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet -#### Második rész - A SafeB9SInstaller indítása +#### II. rész - A SafeB9SInstaller indítása 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet @@ -62,13 +52,13 @@ This means that using a cartridge update from a version containing an older Nint 1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert -#### Harmadik rész - boot9strap telepítése +#### III. rész - boot9strap telepítése 1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik 1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et 1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása 1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt b/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..4c55cf0f88 --- /dev/null +++ b/_pages/hu_HU/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Boot9strap telepítése (SSLoth-Browser)" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +Az SSLoth lehetővé teszi a 11.13.0 és alatti verziók számára, hogy megkerüld a böngésző verzió ellenőrzést, ezáltal lehetővé tegye a new-browserhax vagy az old-browserhax használatát, amik az universal-otherapp-pal együtt használhatók. + +Ha frissítetted az eszközödet az aktuális verzióra, cartridge használatával, ain Internet Browser nem lesz elérhető. Ha ez az eset áll fenn, frissítened kell az eszközödet az utolsó verzióra a System Settings-en keresztül, és a legutolsó verzióhoz készült metódust használnod. +{: .notice--warning} + +### Amire szükséged lesz + +* A [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) legújabb kiadása +* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója + +#### I. rész - Előkészületek + +1. Kapcsold ki a készüléked +1. Helyezd az SD kártyád a számítógépbe +1. Másold az `otherapp.bin`-t az SD kártyád gyökerébe, majd nevezd át `arm11code.bin` névre + +Ha nem látod a `.bin` kiterjesztést ne add kézzel hozzá a fájl végéhez +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe +1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében +1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `boot9strap` mappájába +1. Másold át a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe +1. Tedd vissza az SD kártyád a készülékedbe +1. Kapcsold be a készülékedet + +#### II. rész - SSLoth +1. Indítsd el a System Settings alkalmazást +1. Navigálj az `Internet Settings` -> `Connection Settings` opciókhoz +1. Kattints a saját hálózati kapcsolatodra és navigálj a `Change Settings` -> `Next Page (jobb nyíl)` -> `DNS` opcióhoz +1. Állítsd az "Auto-Obtain DNS"-t "No"-ra majd kattints a `Detailed Setup`-ra +1. Állítsd a Primary DNS-t és a Secondary DNS-t az `054.038.133.070` címre +1. Kattints az OK-ra, majd kattints a Save-re +1. Amikor kérdezi, kattints a "Test"-re a kapcsolat ellenőrzéséhez + + A tesztnek sikeresnek kell lennie +1. Kapcsold ki a készüléked + +#### III. rész - A SafeB9SInstaller indítása +1. Kapcsold be a készülékedet +1. A HOME menüben nyomd meg a bal és jobb váll gombokat egyszerre, hogy megnyisd a kamerát + + Ha nem tudod megnyitni a kamerát, nyisd meg az Internet Browser-t kézzel, és írd be az URL-t e helyett. (`https://zoogie.github.io/web/nbhax/`) +1. Érintsd meg a QR Code gombot és olvasd le [ezt a QR kódot](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Ha hibát kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#a-browser-based-exploit-is-not-working) + + Ha böngésző frissítést szerezne, elképzelhető, hogy az internet szolgáltatód reroutolja a DNS változásokat. Próbálkozz másik internet kapcsolattal vagy frissítsd a konzolod az utolsó verzióra és kövesd a [boot9strap telepítése (Browser)](installing-boot9strap-(browser)) útmutatót. +1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert + +#### IV. rész - boot9strap telepítése + +1. Várj, amíg az összes biztonsági ellenőrzés be nem fejeződik +1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a képernyőn, hogy telepíthesd a boot9strap-et +1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához + +#### V. rész - Luma3DS konfigurálása + +1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia + + Ha fekete képernyőt kapsz, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + + **"Show NAND or user string in System Settings"** +1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot + +#### VI. rész - Az alapértelmezett DNS visszaállítása +1. Indítsd el a System Settings alkalmazást +1. Navigálj az `Internet Settings` -> `Connection Settings` opciókhoz +1. Kattints a saját hálózati kapcsolatodra és navigálj a `Change Settings` -> `Next Page (jobb nyíl)` -> `DNS` opcióhoz +1. Állítsd az "Auto-Obtain DNS"-t "Yes"-re +1. Kattints az OK-ra, majd kattints a Save-re +1. Amikor kérdezi, kattints a "Test"-re a kapcsolat ellenőrzéséhez + + A tesztnek sikeresnek kell lennie +1. Kapcsold ki a készüléked + +___ + +### Tovább a [telepítés véglegesítésére](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/hu_HU/installing-boot9strap-(usm).txt b/_pages/hu_HU/installing-boot9strap-(usm).txt index e68994b804..0cdd68749c 100644 --- a/_pages/hu_HU/installing-boot9strap-(usm).txt +++ b/_pages/hu_HU/installing-boot9strap-(usm).txt @@ -1,90 +1,93 @@ --- -title: "Installing boot9strap (USM)" +title: "Boot9strap telepítése (USM)" --- {% include toc title="Tartalomjegyzék" %} +A Seedminer alapú metódusok könnyebb, biztonságosabb metódusokkal kerültek helyettesítésre. Menj vissza a [Kezdeti lépések](get-started) oldalra, kivéve, ha valós okod van, ennek az oldalnak a használatára (mint például hibás váll-gombok). +{: .notice--warning} + ### Fontos tudnivalók -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. +Ahhoz, hogy a SAFE_MODE-ot exploitálhassuk, be kell injektálnunk egy exploitált WiFi profilt. -We can do this using an existing exploit, BannerBomb3. +Ezt megtenni egy másik létező exploittal, a BannerBomb3-mal tudjuk. -To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. +Hogy ezt elérjük, szükségünk van a rendszer titkosítási kulcsára (movable.sed), hogy újra építsünk egy DSiWare mentést, aminek segítségével be tudjuk injektálni az exploitolt WiFi profilt a kapcsolatok listájára. -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. +Amint a WiFi profil injektálásra került, a SAFE_MODE-ot fogjuk használni, ami egy helyreállítás szolgáltatás, ami elérhető minden 3DS konzolon, hogy aktiválja az exploitolt WiFi profilt. -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. +Az utasítások az Amerikai, Európai, Japán és Koreai régiójú konzolokon működnek, amik a rendszer verzió mögött egy U, E, J vagy K betű jelöl. -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek, egy [Legacy metódust](legacy-methods) kell használnod. Ha támogatásra van szükséged az anyaggal kapcsolatosan, csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, angolul, támogatást. +{: .notice--warning} ### Amire szükséged lesz -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* A `movable.sed` fájlodra a [Seedminer](seedminer)-ből +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója -#### Első rész - Előkészületek +#### I. rész - Előkészületek -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) -1. Upload your movable.sed using the "Choose File" option -1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console +1. Ha a konzolod be van kapcsolva, most kapcsold ki +1. Nyisd meg az [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php/) oldalt a számítógépeden +1. Töltsd fel a `movable.sed` fájlod a "Choose File" opcióval +1. Kattints a "Download unSAFE_MODE-bb3 archive"-ra + + Ez letölt egy exploit DSiWare-t `F00D43D5.bin` néven és egy SAFE_MODE exploit adatfájlt `usm.bin` néven egy zip mappán belül (`unSAFE_MODE-bb3.zip`) 1. Helyezd az SD kártyád a számítógépbe -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it -1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC - + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe + + Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne +1. Másold át a `usm.bin` fájlt az `unSAFE_MODE-bb3 `.zip`-ből az SD kártya gyökerébe +1. Navigálj a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` mappába az SD kártyán + + Az `` ugyanaz, mint amit a [Seedminer](seedminer)-nél használtál + + Az `` egy 32 karakter hosszú nevű mappa az `` mappában + + Ha a `Nintendo DSiWare` mappa nem létezik, hozd létre az `` mappában +1. Ha van más DSiWare mentés fájl (`<8-character-id>.bin`) ebben a mappában, helyezd át őket a számítógépedre + + Így egy üres DSiWare mappát fogsz kapni. Ha áthelyezed a fájlokat a számítógépedre, az segít abban, hogy ne törölj ki semmilyen fontos mentést +1. Másold `F00D43D5.bin` fájlt az `unSAFE_MODE-bb3.zip`-ből a `Nintendo DSiWare` mappába -#### Section II - BannerBomb3 +#### II. rész - BannerBomb3 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet 1. Lépj be a System Settings-be a készülékeden 1. Navigálj ide: `Data Management` -> `DSiWare` -1. Click on the SD Card section - + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied - + If the bottom screen does not flash Red, the exploit profile was not copied and you will not be able to complete the next section. Ensure that your files are properly placed, then try again +1. Kattints az SD kártya részre + + Az alsó képernyődnek pirosan kell villannia, majd a rendszer újraindul a Home menübe egy pár másodperc múlva. Ez azt jelenti, hogy az exploit profil sikeresen másolásra került + + Ha az alsó képernyő nem villant pirosan, az exploit profil nem került másolásra és nem fogod tudni befejezni a következő részt. Ellenőrizd, hogy a fájljaid a helyükön vannak, és próbáld újra 1. Kapcsold ki a készüléked -#### Section III - unSAFE_MODE +#### III. rész - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration +1. Az eszközöd kikapcsolt állapotában tartsd nyomva a következő gombokat: (Bal Váll) + (Jobb Váll) + (D-Pad Fel) + (A), majd nyomd meg a (Power)-t + + Tartsd nyomva a gombokat, amiíg a konzol be nem bootol a Safe Mode-ba +1. Nyomj "OK"-ot a frissítés elfogadásához + + Nincs frissítés. Ez része az exploitnak +1. Nyomj az "I accept"-re a feltételek elfogadásához +1. A frissítés sikertelen lesz a `003-1099` hibakóddal. Ez az elvárt viselkedés +1. Amikor megkérdezésre kerül, hogy "Would you like to configure Internet settings?", válassz "Yes"-t +1. A következő menüben navigálj a `Connection 1` -> `Change Settings` -> `Next Page (jobb nyíl)` -> `Proxy Settings` -> `Detailed Setup` menüponthoz + + Itt egy [vizuális reprezentáció](https://uwuu.ca/images/safemode_highlighted.png) +1. Amint azt látod a felső képernyőn, hogy `B9S install SUCCESS` nyomj meg egy billentyűt az Luma Configuration-ba rebootoláshoz -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása -1. Your device should automatically show the Luma Configuration menu +1. Az eszközöd automatikusan meg kell mutassa a Luma Configuration menüt 1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + **"Show NAND or user string in System Settings"** 1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + + Az eszközödnek kis várakozás után be kell töltenie a Home menüt. Ha fekete képernyőt kapsz, ami több mint 5 percig tart, [nézd át a hibaelhárítási útmutatót](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -#### Section V - Restoring WiFi Configuration Profiles +#### V. rész - A WiFi Configuration Profiles visszaállítása 1. Lépj be a System Settings-be a készülékeden 1. Navigálj ide: `Data Management` -> `DSiWare` -1. Click on the SD Card section - + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Kattints az SD kártya részre + + Az alsó képernyőnek zölden kell villannia, majd a rendszer újraindul a Home menübe egy pár másodperc múlva. Ez azt jelenti, hogy a WiFi konfiguráció sikeresen vissza lett állítva +1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) -1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup +1. Navigálj a `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` mappába az SD kártyán +1. Töröld `F00D43D5.bin` fájlt a Nintendo DSiWare mappából ___ diff --git a/_pages/hu_HU/legacy-methods.txt b/_pages/hu_HU/legacy-methods.txt index 1406a5a782..43e3a95d93 100644 --- a/_pages/hu_HU/legacy-methods.txt +++ b/_pages/hu_HU/legacy-methods.txt @@ -1,46 +1,44 @@ --- -title: "Legacy Methods" +title: "Legacy metódusok" --- {% include toc title="Tartalomjegyzék" %} ### Fontos tudnivalók -There have been multiple improvements and advancements to methods for installing CFW over the last short while. +A CFW telepítésének módszereiben az elmúlt rövid időszakban számos előre lépés és fejlesztés történt. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +Ebből az okból javasolt, hogy a [Boot9strap telepítése(USM)](installing-boot9strap-(usm)) leírást kövesse, ha lehetséges. -However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. +Ennek ellenére a "legacy" vagy kiöregedett metódusok ide kerülnek tárolásra különböző célokkal. Ezek azt várják, hogy először a [Seedminer](seedminer)-t hajtsd végre. -If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. +Ha segítségre van szükséged csatlakozz a [Nintendo Homebrew-hoz Discord-on](https://discord.gg/MWxPgEp) és kérj, angolul, segítséget. -#### Section I - Compatibility Test +#### I. rész - Kompatibilitás teszt -The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. +A következő exploitok két DS-mód applikáció használatát teszik lehetővé, ami beépített a 3DS-be: DS Internet Settings és DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +Ha a DS Internet Settings és a DS Download Play egyaránt nem működik, akkor meg kell javítani azokat a [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/)-sel egy homebrew belépési pont használatával, mint például a PicHaxx. -#### DS Internet Settings Test (used for Fredtool) +#### DS Internet Settings Teszt (a Frogtool által használt) -1. Go to System Settings, then "Internet Settings", then "Nintendo DS Connections" -1. Press "OK" -1. If your device loads into a "Nintendo Wi-Fi Connection Setup" menu, the test was successful - + If the screen stays black or appears to freeze, the test has failed -1. Exit this menu +1. Menj a System Settings-be, majd az "Internet Settings"-be és végül a "Nintendo DS Connections"-höz +1. Nyomd meg az OK gombot +1. Ha az eszközöd a "Nintendo Wi-Fi Connection Setup" menübe tölt be, a teszt sikeres volt + + Ha a képernyő fekete marad vagy lefagyottnak tűnik, a teszt sikertelen +1. Lépj ki ebből a menüből -#### DS Download Play Test (used for Frogtool) +#### DS Download Play Teszt (a Frogtool által használt) -1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) -1. Select "Nintendo DS" -1. If your device loads into a “Download software via DS Download Play” menu, the test was successful - + If the screen stays black or appears to freeze, the test has failed -1. Exit this menu +1. Indítsd el a Download Play alkalmazást (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Válaszd "Nintendo DS"-t +1. Ha az eszközöd a “Download software via DS Download Play” menübe tölt be, a teszt sikeres volt + + Ha a képernyő fekete marad vagy lefagyottnak tűnik, a teszt sikertelen +1. Lépj ki ebből a menüből ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool - + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool - + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file + + Ez a metódus akkor ajánlott, ha a váll gombok nem működnek +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + + Ez a metódus akkor ajánlott, ha a DSiWare Management menü összeomlik \ No newline at end of file diff --git a/_pages/hu_HU/move-emunand.txt b/_pages/hu_HU/move-emunand.txt index 8d09789574..54e8a650b1 100644 --- a/_pages/hu_HU/move-emunand.txt +++ b/_pages/hu_HU/move-emunand.txt @@ -16,10 +16,10 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS ### Amire szükséged lesz * Egy létező EmuNAND -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* A [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) v1.9.2pre1 kiadása * Az [FBI](https://github.com/Steveice10/FBI/releases/latest) legújabb kiadása -### Utasítások +### Lépések #### Első rész - Előkészületek @@ -29,7 +29,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS 1. Másold át a `gm9` mappát a GodMode9 `.zip`-ből az SD kártyád gyökerébe 1. Tedd vissza az SD kártyád a készülékedbe -#### Második rész - DSiWare mentések kimásolása a SysNAND-ról +#### II. rész - DSiWare mentések kimásolása a SysNAND-ról Ha nincs egy DSiWare játékod vagy mentésed sem, ami fontos lenne számodra, akkor hagyd ki ezt a részt. {: .notice--info} @@ -43,7 +43,7 @@ Ha nincs egy DSiWare játékod vagy mentésed sem, ami fontos lenne számodra, a + Ez a folyamat eltarthat egy kis ideig, ha sok DSiWare játékod van 1. Nyomd meg a (B) gombot kétszer, hogy visszamenj a főmenübe -#### Harmadik rész - GBA VC mentések kimásolása +#### II. rész - GBA VC mentések kimásolása Ha nincs egy GBA VC játékod vagy mentésed sem, ami fontos lenne számodra, akkor hagyd ki ezt a részt. {: .notice--info} @@ -69,7 +69,7 @@ Egy `.gbavc.sav` fájl Title ID-jének azonosításához használhatod + Nyomd meg az (A) gombot a folytatáshoz + Nyomd meg a (Start) gombot az eszköz újraindításához -#### Negyedik rész - EmuNAND másolása a SysNAND-ba +#### IV. rész - EmuNAND másolása a SysNAND-ba 1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben 1. Menj ide: `[E:] EMUNAND VIRTUAL` @@ -82,7 +82,7 @@ Egy `.gbavc.sav` fájl Title ID-jének azonosításához használhatod 1. Nyomd meg a (B) gombot, hogy elutasítsd az írási engedélyek visszavonását, ha kérdezi 1. Nyomd meg a (B) gombot, hogy visszamenj a főmenübe -#### Ötödik rész - DSiWare mentések visszaállítása +#### V. rész - DSiWare mentések visszaállítása Ha korábban nem másoltál ki egy DSiWare mentést sem, hagyd ki ezt a részt. {: .notice--info} @@ -99,7 +99,7 @@ Ha korábban nem másoltál ki egy DSiWare mentést sem, hagyd ki ezt a részt. 1. Nyomd meg a (B) gombot, hogy elutasítsd az írási engedélyek visszavonását, ha kérdezi 1. Nyomd meg a (B) gombot kétszer, hogy visszamenj a főmenübe -#### Hatodik rész - GBA VC mentések visszaállítása +#### VI. rész - GBA VC mentések visszaállítása Ha korábban nem másoltál ki egy GBA VC mentést sem, hagyd ki ezt a részt. {: .notice--info} @@ -127,7 +127,7 @@ Egy `.gbavc.sav` fájl Title ID-jének azonosításához használhatod + Lépj ki belőle 1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben -#### Hetedik rész - SysNAND biztonsági mentése +#### VII. rész - SysNAND biztonsági mentése 1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü 1. Válaszd a "Scripts..." opciót @@ -149,7 +149,7 @@ Egy `.gbavc.sav` fájl Title ID-jének azonosításához használhatod 1. Töröld a `__sysnand_###.bin` és a `__sysnand_###.bin.sha` fájlokat az SD kártyád `/gm9/out/` mappájából, miután lemásoltad azokat 1. **Készíts az SD kártyádon található fájlokról biztonsági másolatot a számítógépedre; a következő lépésekben minden fájl törlődni fog róla** -#### Nyolcadik rész - SD kártya formázása +#### VIII. rész - SD kártya formázása 1. Tedd vissza az SD kártyád a készülékedbe 1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü diff --git a/_pages/hu_HU/ntrboot.txt b/_pages/hu_HU/ntrboot.txt index 4c507fb4e0..ca33e8e074 100644 --- a/_pages/hu_HU/ntrboot.txt +++ b/_pages/hu_HU/ntrboot.txt @@ -17,23 +17,23 @@ Vedd figyelembe, hogy a "Time Bomb"-bal rendelkező kártyák nem lesznek képes | Flashkártya neve | Jelenlegi ár | "Time Bomb"? | 3DS verziók? | DSi verziók? | Megjegyzések | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | -| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | -| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. A 2013-as modellek nem kompatibilisek. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. A 2013-as modellek nem kompatibilisek. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 2024. szeptember 3. | <= 11.14.0 | <= 1.4.5 | **Előflashelt ntrboot-tal érkezik**; visszaflashelhető NDS flashkártyára. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | Nem | <= 11.14.0 | <= 1.4.5 | **Előflashelt ntrboot-tal érkezik** ([belső kapcsoló az ntrboot és az NDS módok között]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); ne flasheljen kézzel ntrboot-ot. | +| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | nem | <= 4.3.0 | <= 1.4.4 | | +| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | nem | nincs | nincs | Csak [bizonyos flash chipek](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) kompatibilisek az ntrboot-tal. | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | Minden RTS revízióval kompatibilis. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: 2024. szeptember 3. | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: 2024. szeptember 3. | <= 11.14.0 | <= 1.4.5 | Minden R4iSDHC 20XX flashkártya egyforma. A 2013-as modellek nem kompatibilisek. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: 2024. szeptember 3. | <= 11.14.0 | <= 1.4.5 | Az összes R4iSDHC 20XX flashkártya egyforma. A 2013-as modellek nem kompatibilisek. | +| **Ace3DS X** | | nem | <= 11.14.0 | <= 1.4.5 | **ntrboot-tal gyárilag flashelve** (külső kapcsolóval váltogatható az ntrboot ("3DS") és az NDS mód); ne flasheld kézileg ntrboot-tal. | +| **Ace3DS Plus** | | nem | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | nem | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | nem | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | nem | nincs | nincs | | | **R4i Gold 3DS Deluxe "Starter"** | | nem | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | nem | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | ismeretlen | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: 2024. szeptember 3. | <= 11.14.0 | <= 1.4.5 | Az összes R4iSDHC 20XX flashkártya egyforma. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} @@ -49,7 +49,7 @@ Kipróbálhatod, hogy működik-e a mágnes úgy, hogy az (A), (B), (X), (Y) gom Vedd figyelembe, hogy a flashkártya nem lesz használható az eredeti rendeltetése szerint addig, amíg az ntrboot exploit telepítve van rá. (Kivételt képez az Acekard 2i, ami működőképes marad *kizárólag NDS-eken, és azokon a 3DS-eken, melyekre egyedi firmware van telepítve*.) Ez azt jelenti, hogy a legtöbb flashkártya még csak a home menu-ben sem jelenik majd meg. Az ntrboot flashelési útmutatójának végén van néhány opcionális lépés arról, hogyan töröld azt a flashkártyádról, ha már végeztél. -Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési folyamat során **brickelődjön** néhány hamisított flashkártya és végleg használhatatlanná váljon. Ez elég valószínűtlen, azonban éppen emiatt csak eredeti flashkártyákat támogatunk. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) +Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési folyamat során **brickelődjön** néhány hamisított flashkártya és végleg használhatatlanná váljon. Ez elég valószínűtlen, azonban éppen emiatt csak eredeti flashkártyákat támogatunk. Hogy csökkentsd a kockázatát a hamisított kártya megvásárlásának, javasoljuk, hogy egy megbízható oldalról vásárold azt (mint például az [NDS Card](http://www.nds-card.com/)) {: .notice--danger} ___ diff --git a/_pages/hu_HU/privacy-policy.txt b/_pages/hu_HU/privacy-policy.txt index c36506539b..0bd424e54c 100644 --- a/_pages/hu_HU/privacy-policy.txt +++ b/_pages/hu_HU/privacy-policy.txt @@ -1,30 +1,30 @@ --- -title: "Privacy Policy" # +title: "Adatvédelmi szabályzat" # layout: single-no-ads --- -### Cookies +### Sütik -This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily. +Ez a webhely cookie-kat használ annak érdekében, hogy irányíthassa a felhasználókat az útmutatóban haladás során. A sütik lehetővé teszik, hogy az oldal oldalsávja megjelenítse az aktuális haladást a webhelyen, ezáltal a felhasználók könnyebben eligazodhassanak az utasításokban. -### Embedded Content From Other Websites +### Beágyazott tartalom más oldalakról -This site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves as if the user has visited the other website. +Ez az oldal beágyazhat tartalmat más oldalakról (például videókat, képeket, cikkeket, stb.). A más weboldalakról beágyazott tartalom úgy viselkedik, mintha a felhasználó meglátogatta volna az oldalt. -These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website. +Ezek a webhelyek adatokat gyűjthetnek rólad, használhatnak cookie-kat, beágyazhatnak további harmadik felek általi nyomon követést és nyomon követhetik ezzel a beágyazott tartalommal való interakciót, beleértve a beágyazott tartalommal való interakció nyomon követését akkor is, ha van fiókja és be van jelentkezve az adott webhelyre. -### Analytics +### Analitika -This site uses Google Analytics to monitor and analyze traffic. This site is hosted by Github Pages, which may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with this site. For more information about Github Pages as it relates to user privacy, see the [GitHub Privacy Statement](https://help.github.com/en/articles/github-privacy-statement). +Ez a webhely a Google Analytics segítségével figyeli és elemzi a forgalmat. Ezt a weboldalt a Github Pages üzemelteti, amely adatokat gyűjthet rólad, használhat sütiket, beágyazhat további harmadik felek nyomon követését, és figyelemmel kísérheti a webhelykel való interakciót. A felhasználói adatvédelemmel kapcsolatos Github oldalakról a [GitHub adatvédelmi nyilatkozat] (https://help. github. com/en/articles/github-privacy-statement) oldalon talál további információt. -### Information Collected +### Gyűjtött információk -This site does not collect personal information. This site may collect usage information in order to analyze interest in content and to provide advertisers with information on an aggregate basis. No personally identifiable information is shared with third-party advertising companies. +Ez a webhely nem gyűjt személyes adatokat. Ez a webhely felhasználási információkat gyűjthet a tartalom iránti érdeklődés elemzése és a hirdetők összesített tájékoztatása érdekében. Személyazonosításra alkalmas információ nem kerül megosztásra harmadik fél reklámcéggel. -### Third-Party Websites +### Harmadik fél weboldalak -This site may link to other sites for users to use or reference. This site is not responsible for the privacy policies of other sites. Users should be aware that the privacy policies of other websites may differ from this one. +Ez a webhely más webhelyekre is hivatkozhat, amelyeket a felhasználók használhatnak vagy hivatkozhatnak. Ez a webhely nem felelős más webhelyek adatvédelmi irányelveiért. A felhasználóknak tisztában kell lenniük azzal, hogy más webhelyek adatvédelmi irányelvei eltérhetnek ettől. -### Changes to Privacy Policy +### Változások az Adatvédelmi szabályzatban -The contents of this Privacy Policy may be altered at any time and for any reason. +Ennek az Adatvédelmi szabályzatnak a tartalma bármikor, bármilyen okból megváltozhat. diff --git a/_pages/hu_HU/region-changing.txt b/_pages/hu_HU/region-changing.txt index a229e1b0e2..352d327226 100644 --- a/_pages/hu_HU/region-changing.txt +++ b/_pages/hu_HU/region-changing.txt @@ -8,7 +8,7 @@ title: "Régióváltás" Ez egy kiegészítő rész, amelyben régióváltást végzünk a CFW SysNAND-on. Ezt úgy hajtjuk végre, hogy telepítünk egy olyan 11.5.0-s CTRTransfer képfájlt, ami az általad kívánt régiójú. -Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). +Fontos, hogy tudd, hogy a régióváltás majdnem teljesen felesleges, mivel a Luma3DS támogatja a régiódon kívüli játékokat, illetve a játékonkénti [lokalizáció emulációt](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features) is. Ezen felül, NDS játékok futtatása más, régión kívüli nyelveken is támogatott [TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases) segítségével. Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linkeket ezen az oldalon, szükséged lesz egy torrent kliensre, mint például a [Deluge](http://dev.deluge-torrent.org/wiki/Download). @@ -17,7 +17,7 @@ Vedd figyelembe, hogy amennyiben van más payload fájl a `GodMode9.firm` fájlo Ez a folyamat leválasztja az NNID-det a rendszerről, mivel többé már nem lesz vele kompatibilis. Az NNID-k az őket létrehozó készülékek régiójához vannak kötve, és nem vihetők át más régiójú készülékekre, kivéve ezt az [igen bonyodalmas eljárást](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -Az alábbi folyamat végén **azok a New 3DS-ek, amelyek még sohasem léptek be az eShop-ba** és az **összes Old 3DS** lesz csak képes arra, hogy az eShop-ba lépjen az új régiójához megfelelő NNID létrehozását követően. Azok a régióváltáson átesett New 3DS-ek, amiken már léptek be az eShop-ba az eredeti régiójukban, nem tudnak új NNID-t létrehozni, így az eShop-ba sem tudnak belépni az új régiójukban! +Ez után, **nem fogod elérni az eShop-ot**. Ebbe beleértett minden szolgáltatás ami használja a NNID-, mint példul frissítések, DLC-k, vagy online játék bizonyos játékokkal. A régió visszaállítása az eredeti régióra többnyire nem fogja javítani ezt a problémát. {: .notice--warning} Megjegyzendő viszont, hogy esetenként az eShop megmagyarázhatatlan módon mégsem működik olyan készülékeken, amiken elvileg kellene neki. Ez teljes egészében a Nintendo szervereivel van összefüggésben, és nem igazán van felette irányításunk. Ezen kívül azt is fontos tudni, hogy esetenként az eShop nem várt módon olyan készülékeken is működhet, amiken nem kellene neki (mint például néhány New 3DS). Ennek az oka jelenleg ismeretlen. @@ -29,7 +29,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS ### Amire szükséged lesz -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* A [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) v1.9.2pre1 kiadása * Az [FBI](https://github.com/Steveice10/FBI/releases/latest) legújabb kiadása *(a`.3dsx` fájl)* * A készülékedhez és a választott régióhoz tartozó 11.5.0-s CTRTransfer képfájl: + - [New 3DS vagy 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) @@ -41,9 +41,9 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS + - [Old 3DS vagy 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + - [Old 3DS vagy 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe @@ -55,12 +55,34 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS 1. Másold az `FBI.3dsx` fájlt az SD kártyád `/3ds/` mappájába 1. Tedd vissza az SD kártyád a készülékedbe -#### Második rész - CTRTransfer - +#### II. rész - NAND mentés 1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben 1. Ha rákérdez arra, hogy csináljon-e egy biztonsági másolatot (essential files backup), akkor nyomd meg az (A) gombot, hogy csináljon, majd amikor végzett, nyomd meg ismét az (A) gombot a folytatáshoz 1. Ha rákérdez arra, hogy szeretnéd-e a valós dátumot és időt javítani (fix the RTC date&time), nyomd meg az (A) gombot, állítsd be a helyes dátumot és időt, majd nyomd meg az (A) gombot a folytatáshoz + Ne feledd, hogy amennyiben ezen a ponton szükséges volt a helyes dátum és idő beállítása, a System Settingsben is be kell majd állítanod a helyes időt az útmutató végén +1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü +1. Válaszd a "Scripts..." opciót +1. Válaszd ezt: "GM9Megascript" +1. Válaszd ezt: "Backup Options" +1. Válaszd ezt: "SysNAND Backup" +1. Nyomd meg az (A) gombot a megerősítéshez + + Ez a folyamat igénybe vesz majd némi időt + + Ha hibát kapsz, győződj meg róla, hogy legalább 1.3 GB szabad hely van az SD kártyádon +1. Nyomd meg az (A) gombot a folytatáshoz +1. Nyomd meg a (B) gombot, hogy visszamenj a főmenübe +1. Válaszd az "Exit" opciót +1. Nyomd meg az (A) gombot az írási engedélyek visszavonásához +1. Az SD kártya leválasztásához az (R) gomb lenyomva tartása mellett nyomd meg a (B) gombot +1. Helyezd az SD kártyád a számítógépbe +1. Másold a `__sysnand_###.bin` és az `essential.exefs` fájlokat az SD kártyád `/gm9/out/` mappájából valami biztonságos helyre a számítógépeden + + Tarts belőle biztonsági másolatokat több különböző helyen is (például online tárhelyen) + + Ezek a biztonsági mentések fognak megmenteni, ha a későbbiekben brickelődne a konzolod, vagy bármi félresikerülne a jövőben +1. Töröld a `__sysnand_###.bin` és a `__sysnand_###.bin.sha` fájlokat az SD kártyád `/gm9/out/` mappájából, miután lemásoltad azokat +1. Tedd vissza az SD kártyád a készülékedbe + + Ha az SD kártyádat nem ismerte fel, csatold fel újra úgy, hogy egyszerre lenyomod az (R) és a (B) gombokat + +#### III. rész - CTRTransfer + 1. Menj ide: `[0:] SDCARD` -> `gm9` 1. Nyomd meg az (A) gombot, miközben a CTRTransfer `.bin` van kijelölve, hogy kiválaszd 1. Válaszd a "CTRNAND options..." opciót @@ -87,7 +109,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS + B9S és Luma használatakor (mint esetedben) biztonságosak a rendszerfrissítések + Ha ez hibát ad, akkor állítsd a DNS beállításodat "auto"-ra -#### Harmadik rész - FBI elindítása +#### IV. rész - FBI elindítása 1. Indítsd el a Download Play alkalmazást (ez az [ikon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Nyomd meg az (L) + (Le) + (Select) gombokat egyszerre, hogy kinyíljon a Rosalina menü @@ -100,7 +122,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS 1. Indítsd el a Download Play alkalmazást 1. A készülékednek ezek után be kell töltenie a Homebrew Launchert -#### Negyedik rész - Ticketek újratelepítése +#### V. rész - Ticketek újratelepítése Ha a szkript nem talált egy ticketet sem, és azt írta, hogy hagyd ki ezt a rész, akkor hagyd is ki {: .notice--info} @@ -120,14 +142,14 @@ Ha a szkript nem talált egy ticketet sem, és azt írta, hogy hagyd ki ezt a r + Nyomd meg a (B) gombot, hogy elutasítsd a ticketek CDN-ről történő telepítését. 1. Nyomd meg a (Home) gombot az FBI-ból való kilépéshez -#### Ötödik rész - Régió beállítások +#### VI. rész - Régió beállítások 1. Indítsd el a System Settings-et 1. Válaszd az "Other Settings", majd a "Profile", végül a "Region Settings" opciót 1. Válassz egy olyan országot, ami abba a régióba tartozik, amibe váltottál 1. Nem szükséges államot beállítanod, ha kérdezné -#### Hatodik rész - CTRTransfer képfájl eltávolítása +#### VII. rész - CTRTransfer képfájl eltávolítása 1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben 1. Menj ide: `[0:] SDCARD` -> `gm9` diff --git a/_pages/hu_HU/restoring-cfw.txt b/_pages/hu_HU/restoring-cfw.txt new file mode 100644 index 0000000000..39f7d63727 --- /dev/null +++ b/_pages/hu_HU/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "CFW visszaállítása" +--- + +{% include toc title="Tartalomjegyzék" %} + +### Fontos tudnivalók + +Ez az oldal egy létező modern boot9strap telepítésre mutatja be a custom firmware appok újra telepítését. Továbbá használható abban az esetben is helyreállításra, ha elveszett vagy megsérült az SD kártya. + +### Amire szükséged lesz +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója + +### Lépések + +#### I. rész - Előkészületek + +1. Helyezd az SD kártyád a számítógépbe +1. Másold át a `boot.3dsx` és `boot.firm` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe + + Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne +1. Tedd vissza az SD kártyád a készülékedbe + +#### II. rész - Luma3DS konfigurálása + +1. Kapcsold be a készüléked + * Látnod kell ezt követően a Luma3DS konfigurációs menüt +1. Használd az (A) gombot és D-Pad-et a következő engedélyezéséhez: + * **"Show NAND or user string in System Settings"** +1. Mentéshez és újraindításhoz nyomd meg a (Start) gombot + +___ + +### Tovább a [telepítés véglegesítésére](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/hu_HU/seedminer.txt b/_pages/hu_HU/seedminer.txt index a755f72d06..20a2486d84 100644 --- a/_pages/hu_HU/seedminer.txt +++ b/_pages/hu_HU/seedminer.txt @@ -4,91 +4,80 @@ title: "Seedminer" {% include toc title="Tartalomjegyzék" %} +A Seedminer alapú metódusok könnyebb, biztonságosabb metódusokkal kerültek helyettesítésre. Menj vissza a [Kezdeti lépések](get-started) oldalra, kivéve, ha valós okod van, ennek az oldalnak a használatára (mint például hibás váll-gombok). +{: .notice--warning} + ### Fontos tudnivalók -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +A boot9strap telepítéséhez az eszközödre, megfejtjük az eszköz egyedi titkosító kulcsát. -To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). +Ennek eléréséhez egy Seedminer nevű eszközt fogunk használni, hogy kiszámítsuk a készüléked DSiWare titkosítási kulcsát (`movable.sed`). Ezután ezt a DSiWare titkosítási kulcsot használjuk egy kompatibilis DSiWare alkalmazás visszafejtésére, és kihasználjuk azt a saját kódunk futtatásához (a pontos kihasználás az eszköz régiójától függ). -If this key were completely random, the encryption key would be impossible to break on current computing hardware. Fortunately, the first half of the key (`movable_part1.sed`) is actually mathematically related to your device's Friend Code, allowing us to break the encryption. For information on how Seedminer works, please see [this presentation](https://zoogie.github.io/web/34⅕c3). +Ha ez a kulcs teljesen véletlenszerű lenne, a titkosítási kulcsot lehetetlen lenne feltörni a jelenleg elérhető hardverekkel. Szerencsére a kulcs első fele (`movable_part1.sed`) matematikailag összefüggésben van a készüléked Friend Code-jával, ami lehetővé teszi a titkosítás feltörését. További információért arról, hogyan működik a Seedminer, nézd meg [ezt a prezentációt](https://zoogie.github.io/web/34⅕c3). -This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method. +Ez a módszer egy erős grafikus kártyát használ a szükséges számítások elvégzéséhez. Egy önkéntes által üzemeltetett webhely segít neked ebben a módszerben. -### Utasítások +### Lépések -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### I. rész - Előkészületek 1. Helyezd az SD kártyád a számítógépbe -1. Navigate to the `Nintendo 3DS` folder on your SD card -1. Copy the 32 character long name of the folder you see inside Nintendo 3DS - + Do not go inside any more folders - + If you see multiple folders with long, random names inside `Nintendo 3DS` without opening any other folders, perform the following: - + Rename the `Nintendo 3DS` folder to `BACKUP_Nintendo 3DS` - + Reinsert your SD card into your device and power on your device - + Wait for the device to generate the SD card data - + Power off your device and reinsert your SD card into your computer - + Navigate to the `Nintendo 3DS` folder on your SD card - + Copy the 32 character long name of the folder you see - + Delete the `Nintendo 3DS` folder - + Rename the `BACKUP_Nintendo 3DS` folder to `Nintendo 3DS` -1. Paste your 32 character long folder name into a document you can reference later - + This folder name is also known as your "ID0" +1. Lépj be az SD kártyád `Nintendo 3DS` könyvtárába +1. Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz + + Nem menj beljebb több mappát + + Ha több mappát látsz véletlen nevekkel a `Nintendo 3DS` könytárban, bármilyen mappa megnyitása nélkül tedd a következőt: + + Nevezd át a `Nintendo 3DS` mappát `BACKUP_Nintendo 3DS` névre + + Tedd vissza az SD kártyát a készülékedbe, és kapcsold be + + Várd meg, amíg a készüléked legenerálja az SD kártyára az adatokat + + Kapcsold ki a készülékedet, és helyezd vissza az SD kártyádat a számítógépedbe + + Lépj be az SD kártyád `Nintendo 3DS` könyvtárába + + Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz + + Töröld a `Nintendo 3DS` mappát + + Nevezd át a `BACKUP_Nintendo 3DS` mappát `Nintendo 3DS` névre +1. Illeszd be a 32 karakter hosszú mappanevet egy tetszőleges fájlba, amit később elérsz + + Ez a mappa "ID0" néven is ismert 1. Kapcsold be a készülékedet 1. Válaszd a Friend List opciót (a [narancsszínű fej ikon]({{ "/images/friend-list-icon.png" | absolute_url }}) a Home Menu felső sávján) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Find your Mii profile, then find the "Friend Code" field on the top screen + + Ha hibaüzenetet kapsz, és visszadob a menübe, vagy új Mii-t kell csinálnod, vagy a konzolod nem tud csatlakozni a Nintendo szervereihez (kitiltás, vagy kapcsolódási hiba miatt) +1. Keresd meg a Mii profilodat, ott találod a "Friend Code" mezőt a felső képernyőn -#### Section III - Seedminer +#### II. rész - Seedminer -1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer - + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field -1. Paste your device's 32 character long folder name into the "Your ID0" field - + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section -1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. -1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console -1. Wait for the site to update - + If it does not, wait a few minutes before refreshing the page once -1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button -1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. - + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. When the process has completed, download your `movable.sed` file from the site - + Keep this file as you will need it in the upcoming pages +1. Nyisd meg a [Bruteforce Movable](https://seedminer.hacks.guide/) oldalt a számítógépeden + + Ez az oldal képes automatizálni a `movable_part1.sed` előállítását (egy bot 3DS konzol segítségével), illetve a készüléked DSiWare titkosításának feltörését (egy önkéntes számítógépén futtatva a Seedminer-t) + + Ha az oldal nem működik, csatlakozz a [Nintendo Homebrew Discord-on](https://discord.gg/MWxPgEp) csatornához, és kérj segítséget (angol nyelven) valakitől +1. Írd be a készüléked Friend Code-ját (szóközök és kötőjelek nélkül) a "Your friend code" mezőbe +1. Illeszd be a készüléked 32 karakter hosszú mappanevét a "Your ID0" mezőbe + + Ne próbáld meg kézzel beadni az ID0 kódot. Legyél biztos abban, hogy az ID0 helyes, azzal, hogy másolod és beilleszted onnan, ahova az előző részben elmentetted +1. Nyomd meg a "Go"-t + + Ha az oldal azonnal a 4. lépésre ugrik, töltsd le a `movable.sed` fájlt és folytasd a következő szakasszal +1. Ha kéri, használd a "Register Friend" gombot a készülékeden és add hozzá a bot 3DS konzol Friend Code-ját +1. Várj, amíg az oldal frissül + + Ha nem így történik, várj néhány percet, mielőtt frissíted az oldalt még egyszer +1. Ha az oldal feldolgozta az információt, lehetőséged van a folytatásra ("Continue") vagy másik eszközre végrehajtásra ("Do another device"). Kattints az zöld "Continue" gombra +1. Várj az értesítőre a folyamat befejezéséről + + Ez általában gyors (1-5 perc) de néhány esetben fél óra is lehet + + Ez alatt a folyamat alatt, a bot, amit hozzáadtál nem biztos, hogy feltűnik a 3DS-eden. Egészen addig, amíg a weboldal frissít, ez nem probléma + + Ha egy fél óra után is még mindig várakozol, csatlakozz a [Nintendo Homebrew Discord-on](https://discord.gg/MWxPgEp) csatornához, és kérj segítséget (angol nyelven) valakitől +1. Amikor a folyamat befejeződött, töltsd le a `movable.sed` fájlodat az oldalról + + Őrizd meg ezt fájlt, mert szükséged lesz rá a következő oldalkon ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Ajánlott) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +Ez a metódusa Seedminer használatának további exploitolás céljából használja a `movable.sed` fájlod, hogy egy egyedi Pokémon Picross mentés fájlt írjon, amit már használható az universal-otherapp-pal custom firmwre telepítésére. -This method is compatible with all regions, though the CHN region is not covered by this guide. +Ehhez a módhoz szükséged van Pokémon Picross alkalmazásra (ingyenes az eShop-on), így eShop hozzáférés és egy USA, EUR, vagy JPN régiós 3DS szükséges hozzá. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Folytatás a [Boot9strap telepítése (PicHaxx)](installing-boot9strap-(pichaxx)) lépéssel {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +Ez a metódusa Seedminer használatának további exploitolása céljából használja a `movable.sed` fájlod, hogy egy egyedi DSiWare mentést hozzon létre, ami exploitolja a rendszert, hogy kiírja a DSiWare rendszer dumpját. -These methods are outdated and not recommended unless otherwise indicated. +Ez a mód csak akkor ajánlott, ha nem tudok követni a PicHaxx + universal-otherapp lépéseit. -[Legacy Methods](legacy-methods) ++ Folytatás a [BannerBomb3](bannerbomb3)-mal +{: .notice--warning} diff --git a/_pages/hu_HU/site-navigation.txt b/_pages/hu_HU/site-navigation.txt index e029724f9c..ece4f74ae9 100644 --- a/_pages/hu_HU/site-navigation.txt +++ b/_pages/hu_HU/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Kiemelt** + [Telepítés véglegesítése](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Boot9strap telepítése (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Boot9strap telepítése (böngésző)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Boot9strap telepítése (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Frissítés kártyáról](cart-update) + [Közreműködők](credits) ++ [CFW ellenőrzése](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Adományok](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,31 +34,36 @@ sitemap: false + [ntrboot flashelése (több 3DS)](flashing-ntrboot-(3ds-multi-system)) + [ntrboot flashelése (DSi)](flashing-ntrboot-(dsi)) + [ntrboot flashelése (NDS)](flashing-ntrboot-(nds)) ++ [SD formázás (Linux)](formatting-sd-(linux)) ++ [SD formázás (Mac)](formatting-sd-(mac)) ++ [SD formázás (Windows)](formatting-sd-(windows)) + [Kezdeti lépések](get-started) ++ [Kezdeti lépések (New 3DS)](get-started-(new-3ds)) ++ [Kezdeti lépések (Old 3DS)](get-started-(old-3ds)) + [GodMode9 használata](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Főoldal](/) + [Homebrew Launcher (alternatívák)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) -+ [boot9strap telepítése (2xrsa)](installing-boot9strap-(2xrsa)) -+ [boot9strap telepítése (böngésző)](installing-boot9strap-(browser)) -+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) -+ [boot9strap telepítése (Hardmod)](installing-boot9strap-(hardmod)) -+ [boot9strap telepítése (MSET)](installing-boot9strap-(mset)) -+ [boot9strap telepítése (ntrboot)](installing-boot9strap-(ntrboot)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) -+ [boot9strap telepítése (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Boot9strap telepítése (2xrsa)](installing-boot9strap-(2xrsa)) ++ [Boot9strap telepítése (böngésző)](installing-boot9strap-(browser)) ++ [Boot9strap telepítése (Fredtool)](installing-boot9strap-(fredtool)) ++ [Boot9strap telepítése (Frogtool)](installing-boot9strap-(frogtool)) ++ [Boot9strap telepítése (Hardmod)](installing-boot9strap-(hardmod)) ++ [Boot9strap telepítése (MSET)](installing-boot9strap-(mset)) ++ [Boot9strap telepítése (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Boot9strap telepítése (PicHaxx)](installing-boot9strap-(pichaxx)) ++ [Boot9strap telepítése (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Boot9strap telepítése (safecerthax)](installing-boot9strap-(safecerthax)) ++ [Boot9strap telepítése (Soundhax)](installing-boot9strap-(soundhax)) ++ [Boot9strap telepítése (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Boot9strap telepítése (USM)](installing-boot9strap-(usm)) + [EmuNAND költöztetése](move-emunand) + [ntrboot](ntrboot) + [Régióváltás](region-changing) ++ [CFW visszaállítása](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Hibaelhárítás](troubleshooting) + [CFW eltávolítása](uninstall-cfw) + [B9S frissítése](updating-b9s) diff --git a/_pages/hu_HU/troubleshooting.txt b/_pages/hu_HU/troubleshooting.txt index d5f154013e..acd03c32de 100644 --- a/_pages/hu_HU/troubleshooting.txt +++ b/_pages/hu_HU/troubleshooting.txt @@ -18,27 +18,27 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme ### Amire szükséged lesz -* The latest release of [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) *(the .3dsx file)* +* A [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) legújabb kiadása *(a .3dsx fájl)* -### Utasítások +### Lépések #### Első rész - Előkészületek 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe 1. Hozz létre egy mappát `3ds` néven az SD kártyád gyökerében, ha még nem létezik ilyen -1. Copy `TWLFix-CFW.3dsx` to the `/3ds/` folder on your SD card +1. Másold az `TWLFix-CFW.3dsx` fájlt az SD kártyád `/3ds/` mappájába 1. Tedd vissza az SD kártyád a készülékedbe -#### Section II - Fixing TWL +#### II. rész - A TWL javítása -1. Open the Homebrew Launcher -1. Launch TWLFix-CFW from the list of homebrew -1. Press (A) to uninstall the broken TWL titles -1. Press (Start) to reboot the device -1. Perform a System Update by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" - + The update will see that the essential TWL titles have been uninstalled, and will redownload and reinstall them -1. Once the update is complete, tap "OK" to reboot the device +1. Nyisd meg a Homebrew Lancher-t +1. Indítsd el a TWLFix-CFW-t a homebrew listából +1. Nyomj (A)-t a törött TWL címek eltávolításához +1. Nyomj (Start) gombot az eszköz újraindításához +1. Frissítsd az eszközödet következőképp. Lépj be a System Settings-be, majd az "Other settings"-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a "System Update" opciót + + A frissítés észreveszi, hogy lényeges TWL címek kerültek eltávolításra és le fogja tölteni és újratelepíteni azokat +1. Ha a frissítés kész, érintsd meg az "OK"-ot az eszköz újraindításához ## Nem lehet injektálni H&S-be Gateway segítségével downgrade-elt készüléken @@ -153,5 +153,5 @@ A böngésző alapú exploitok (mint például a browserhax, vagy az 2xrsa) gyak ## Kék képernyő bootoláskor (bootrom hiba) 1. A készüléked brickelve lett -1. You will need to get an ntrboot-comptible flashcart (one of the ones on [this list](ntrboot) or a [hardmod](https://gbatemp.net/threads/414498/), or repair / replace your device +1. Szükséged van arra, hogy beszerezz egy ntrboot-kompatibilis flashcart-ot (egyike az [ezen a listán](ntrboot) vagy találhatóknak [hardmod](https://gbatemp.net/threads/414498/) vagy javítsd/kicseréld eszközöd 1. Segítségért (angol nyelven), fordulj ide: [Nintendo Homebrew a Discord-on](https://discord.gg/MWxPgEp) diff --git a/_pages/hu_HU/uninstall-cfw.txt b/_pages/hu_HU/uninstall-cfw.txt index 08f68d8704..906a14bc90 100644 --- a/_pages/hu_HU/uninstall-cfw.txt +++ b/_pages/hu_HU/uninstall-cfw.txt @@ -11,7 +11,7 @@ A következőkben teljes egészében el fogjuk távolítani a CFW-t a készülé Ez az esetek többségében nem old meg semmilyen olyan problémát, ami a CFW telepítése közben felmerülhet. Javasolt inkább elolvasnod a [Hibaelhárítás](troubleshooting) oldalt, vagy segítséget kérni (angol nyelven) itt: [Nintendo Homebrew a Discord-on](https://discord.gg/MWxPgEp). {: .notice--danger} -Any unsigned (illegitimate) games will be rendered unusable and should be manually removed before starting this process by using the Data Management section of the System Settings. Használj [mentéskezelőt](https://github.com/FlagBrew/Checkpoint/releases/latest), hogy biztonsági másolatot készíts azon (nem eredeti) játékok mentéséről, amik fontosak a számodra. +Minden aláíratlan (illegitim) játék használhatatlanná válik és kézzel eltávolítandó a folyamat előtt a System settings Data Management szekciójában. Használj [mentéskezelőt](https://github.com/FlagBrew/Checkpoint/releases/latest), hogy biztonsági másolatot készíts azon (nem eredeti) játékok mentéséről, amik fontosak a számodra. Ez az eljárás nem fogja befolyásolni sem az NNID-det, sem az eredeti játékaidat, sem bármilyen mentést, ami az eredeti, megvásárolt játékaidhoz tartozik. @@ -22,11 +22,11 @@ Vedd figyelembe, hogy amennyiben van más payload fájl a `GodMode9.firm` fájlo ### Amire szükséged lesz -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* A [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) v1.9.2pre1 kiadása -### Utasítások +### Lépések -#### Section I - Safety Test +#### I. rész - Biztonsági teszt 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe @@ -37,33 +37,33 @@ Vedd figyelembe, hogy amennyiben van más payload fájl a `GodMode9.firm` fájlo 1. Ha rákérdez arra, hogy csináljon-e egy biztonsági másolatot (essential files backup), akkor nyomd meg az (A) gombot, hogy csináljon, majd amikor végzett, nyomd meg ismét az (A) gombot a folytatáshoz 1. Ha rákérdez arra, hogy szeretnéd-e a valós dátumot és időt javítani (fix the RTC date&time), nyomd meg az (A) gombot, állítsd be a helyes dátumot és időt, majd nyomd meg az (A) gombot a folytatáshoz + Ne feledd, hogy amennyiben ezen a ponton szükséges volt a helyes dátum és idő beállítása, a System Settingsben is be kell majd állítanod a helyes időt az útmutató végén -1. Navigate to `[1:] SYSNAND CTRNAND > title > 00040138 > (X)0000002 > content` - + On a "New" edition console, the (X) will instead be 2 - + On an "Old" edition console, the (X) will instead be 0 -1. Select the `.app` file -1. Select `NCCH image options` -1. Select `Mount image to drive` -1. In the window that appears, open the `exefs` folder -1. In this folder, select the `.firm` file -1. Select "FIRM image options" -1. Select "Boot FIRM" -1. When prompted, choose to decrypt and make a copy -1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section - + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you +1. Navigáljt az `[1:] SYSNAND CTRNAND > title > 00040138 > (X)0000002 > content` útvonalra + + Egy "New" verziós konzolon, az (X) helyén 2 áll + + Egy Old" verziós konzolon, az (X) helyén 0 áll +1. Válaszd ki az `.app` fájt +1. Válaszd az `NCCH image options`-t +1. Válaszd a `Mount image to drive` opciót +1. A megjelenő ablakban, válaszd az `exefs` mappát +1. Ebben a mappában válaszd a `.firm` fájlt +1. Válaszd az `FIRM image options`-t +1. Válaszd a "Boot FIRM"-et +1. Amikor a rendszer kéri, válaszd a dekriptálást és másolat készítését +1. Be kell bootolnod a normál 3DS Home menübe. Ha így történt, akkor kapcsold ki az eszközt és folytasd a következő résznél + + Ha NEM bootolsz a normál 3DS Home menübe, az útmutató folytatása brickelni **FOGJA** az eszközödet. Csatlakozz a [Nintendo Homebrew Discord-on](https://discord.gg/MWxPgEp) csatornához, és kérj segítséget (angol nyelven) valakitől -#### Section II - Prep Work +#### II. rész - Előkészületek 1. Kapcsold be a készülékedet -1. Navigate to System Settings > Data Management > Nintendo 3DS > Software -1. In this list of software, delete any non-Nintendo content you installed while using CFW - + This includes common system software such as FBI, Anemone3DS, Luma Updater, Homebrew Launcher, Checkpoint, and others, along with any non-eShop games -1. Navigate to Data Management > DSiWare -1. In this list of software, delete any non-Nintendo content you installed while using CFW - + This includes software such as TWiLightMenu++, along with any non-eShop games - + Failure to remove all CFW software from both the 3DS and DSiWare sections before uninstalling CFW may prevent or disable access to the Data Management menu after uninstalling CFW +1. Navigálj el a System Settings > Data Management > Nintendo 3DS > Software menüponthoz +1. Ebben a szoftver listában törölj minden nem-Nintendo tartalmat, amit telepítettél a CFW használatával + + Ebbe bele tartoznak az általános rendszer szoftverek, mint az FBI, Anemone3DS, Luma Updater, Homebrew Launcher, Checkpoint és egyebek beleértve a non-eShop játékokat is +1. Navigálj ide: Data Management -> DSiWare +1. Ebben a szoftver listában törölj minden nem-Nintendo tartalmat, amit telepítettél a CFW használatával + + Ebbe bele tartoznak olyan szoftverek, mint az TWiLightMenu++ beleértve a non-eShop játékokat is + + A sikertelen eltávolítása minden CFW szoftvernek a 3DS és a DSiWare szekciókban a CFW eltávolítása előtt megakadályozhatja vagy letilthatja a hozzáférést a Data Management menühöz a CFW eltávolítása után 1. Kapcsold ki a készüléked -#### Section III - Running Uninstall Script +#### III. rész - Az eltávolító szkript futtatása 1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben 1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü diff --git a/_pages/hu_HU/updating-b9s.txt b/_pages/hu_HU/updating-b9s.txt index f9ccd20d8f..22db327334 100644 --- a/_pages/hu_HU/updating-b9s.txt +++ b/_pages/hu_HU/updating-b9s.txt @@ -8,44 +8,29 @@ title: "B9S frissítése" Ez az oldal azoknak a felhasználóknak szól, akik már rendelkeznek telepített boot9strap-pel, és szeretnék frissíteni azt a legfrissebb verzióra. -{% capture notice-1 %} -Kaptunk visszajelzéseket kitiltási hullámokról, melyeket a Nintendo a CFW-t használóknak osztogatott. Ahhoz, hogy megvédd magadat, kérjük kövesd az alábbi lépéseket még az útmutató megkezdése előtt: - -1. Menj a System Settings-be, ott válaszd ezt: "Internet Settings", majd ezt: "SpotPass", végül ezt: "Sending of System Information" -1. Kapcsold ki a "Sending of System Information" opciót -1. Lépj ki a System Settings-ből -1. Válaszd a Friend List opciót (a [narancsszínű fej ikon]({{ "/images/friend-list-icon.png" | absolute_url }}) a Home Menu felső sávján) - + Ha hibaüzenetet kapsz, és visszadob a menübe, a Friend List már vagy korábban letiltásra került, vagy a konzolod nem tud csatlakozni a Nintendo szervereihez (kitiltás, vagy kapcsolódási hiba miatt) -1. Itt menj a beállításokba (Settings), ott válaszd ezt: "Friend Notification Settings", majd ezt: "Show friends what you're playing" -1. Kapcsold ki a "Show friends what you're playing" opciót -1. Lépj ki a Friend List-ből - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Habár hiszünk abban, hogy az egyedi firmware online használata biztonságos, fordultak elő online hálózati bannolások a múltban, elsősorban csalásért, vagy gyanús eShop aktívitásért. +{: .notice--warning} ### Amire szükséged lesz * A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása -* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) legújabb kiadása +* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)* +* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója -### Utasítások +### Lépések -#### Első rész - Előkészületek +#### I. rész - Előkészületek A most következő lépésekben mindig írd felül az SD kártyán található fájlokat, ha már létezne bármelyik. {: .notice--info} 1. Helyezd az SD kártyád a számítógépbe -1. Másold az `boot.3dsx` fájlt az SD kártyád gyökerébe 1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében 1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába 1. Másold át a `SafeB9SInstaller.firm` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád `/luma/payloads/` mappájába 1. Tedd vissza az SD kártyád a készülékedbe -#### Második rész - boot9strap telepítése +#### II. rész - boot9strap telepítése 1. Indítsd el a Luma3DS chainloader menüt a (Start) gomb lenyomva tartásával boot közben 1. Indítsd el a SafeB9SInstaller programot az (A) gomb lenyomásával @@ -54,15 +39,15 @@ A most következő lépésekben mindig írd felül az SD kártyán található f 1. Ha ez elkészült, nyomd le a (Start)-ot, és az (A)-t, hogy újraindítsd a készülékedet, és a Luma3DS chainloader-be juss + Ha az `argc = 0` hibával találkozol a készüléked bootolása közben a B9S frissítése után, csak menj tovább, hogy kijavítsd -#### Harmadik rész - Luma3DS frissítése +#### III. rész - Luma3DS frissítése 1. Kapcsold ki a készüléked 1. Helyezd az SD kártyád a számítógépbe -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártyád gyökerébe, és cseréld le a már meglévő fájlt 1. Tedd vissza az SD kártyád a készülékedbe 1. Kapcsold be a készülékedet -#### Negyedik rész - Luma3DS konfigurálása +#### IV. rész - Luma3DS konfigurálása Ez a szakasz csak akkor kell, ha előjön a Luma3DS konfigurációs menü újraindítás után. {: .notice--info} diff --git a/_pages/id_ID/a9lh-to-b9s.txt b/_pages/id_ID/a9lh-to-b9s.txt index 60eaed476f..ec52109ad7 100644 --- a/_pages/id_ID/a9lh-to-b9s.txt +++ b/_pages/id_ID/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/id_ID/bannerbomb3.txt b/_pages/id_ID/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/id_ID/bannerbomb3.txt +++ b/_pages/id_ID/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/id_ID/checking-for-cfw.txt b/_pages/id_ID/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/id_ID/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/id_ID/credits.txt b/_pages/id_ID/credits.txt index e66f591db9..c30986407b 100644 --- a/_pages/id_ID/credits.txt +++ b/_pages/id_ID/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/id_ID/dsidumper.txt b/_pages/id_ID/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/id_ID/dsidumper.txt +++ b/_pages/id_ID/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/id_ID/faq.txt b/_pages/id_ID/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/id_ID/faq.txt +++ b/_pages/id_ID/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt index 90f49a797f..6f9a26a828 100644 --- a/_pages/id_ID/finalizing-setup.txt +++ b/_pages/id_ID/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/id_ID/flashing-ntrboot-(3ds-multi-system).txt b/_pages/id_ID/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/id_ID/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/id_ID/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt b/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/id_ID/flashing-ntrboot-(nds).txt b/_pages/id_ID/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/id_ID/flashing-ntrboot-(nds).txt +++ b/_pages/id_ID/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/id_ID/formatting-sd-(linux).txt b/_pages/id_ID/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/id_ID/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/id_ID/formatting-sd-(mac).txt b/_pages/id_ID/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/id_ID/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/id_ID/formatting-sd-(windows).txt b/_pages/id_ID/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/id_ID/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/id_ID/get-started-(new-3ds).txt b/_pages/id_ID/get-started-(new-3ds).txt index a356bbb8ee..65bd5f0197 100644 --- a/_pages/id_ID/get-started-(new-3ds).txt +++ b/_pages/id_ID/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/id_ID/get-started-(old-3ds).txt b/_pages/id_ID/get-started-(old-3ds).txt index 8fc9ad47a9..2dbfd6b915 100644 --- a/_pages/id_ID/get-started-(old-3ds).txt +++ b/_pages/id_ID/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/id_ID/get-started.txt b/_pages/id_ID/get-started.txt index 824816730c..a7240e762e 100644 --- a/_pages/id_ID/get-started.txt +++ b/_pages/id_ID/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/id_ID/godmode9-usage.txt b/_pages/id_ID/godmode9-usage.txt index 99014ce114..cd139f0548 100644 --- a/_pages/id_ID/godmode9-usage.txt +++ b/_pages/id_ID/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/id_ID/home.txt b/_pages/id_ID/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/id_ID/home.txt +++ b/_pages/id_ID/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt b/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/id_ID/homebrew-launcher-(pichaxx).txt b/_pages/id_ID/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/id_ID/homebrew-launcher-(pichaxx).txt +++ b/_pages/id_ID/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/id_ID/homebrew-launcher-(soundhax).txt b/_pages/id_ID/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/id_ID/homebrew-launcher-(soundhax).txt +++ b/_pages/id_ID/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/id_ID/homebrew-launcher-(steelhax).txt b/_pages/id_ID/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/id_ID/homebrew-launcher-(steelhax).txt +++ b/_pages/id_ID/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/id_ID/installing-boot9strap-(browser).txt b/_pages/id_ID/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/id_ID/installing-boot9strap-(browser).txt +++ b/_pages/id_ID/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/id_ID/installing-boot9strap-(fredtool).txt b/_pages/id_ID/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/id_ID/installing-boot9strap-(fredtool).txt +++ b/_pages/id_ID/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/id_ID/installing-boot9strap-(frogtool).txt b/_pages/id_ID/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/id_ID/installing-boot9strap-(frogtool).txt +++ b/_pages/id_ID/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/id_ID/installing-boot9strap-(hardmod).txt b/_pages/id_ID/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/id_ID/installing-boot9strap-(hardmod).txt +++ b/_pages/id_ID/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt +++ b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/id_ID/installing-boot9strap-(ntrboot).txt +++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/id_ID/installing-boot9strap-(pichaxx).txt b/_pages/id_ID/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/id_ID/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/id_ID/installing-boot9strap-(safecerthax).txt b/_pages/id_ID/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/id_ID/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/id_ID/installing-boot9strap-(soundhax).txt b/_pages/id_ID/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/id_ID/installing-boot9strap-(soundhax).txt +++ b/_pages/id_ID/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt b/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/id_ID/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/id_ID/installing-boot9strap-(usm).txt b/_pages/id_ID/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/id_ID/installing-boot9strap-(usm).txt +++ b/_pages/id_ID/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/id_ID/legacy-methods.txt b/_pages/id_ID/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/id_ID/legacy-methods.txt +++ b/_pages/id_ID/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/id_ID/ntrboot.txt b/_pages/id_ID/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/id_ID/ntrboot.txt +++ b/_pages/id_ID/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/id_ID/region-changing.txt b/_pages/id_ID/region-changing.txt index 75af6091cf..595af43745 100644 --- a/_pages/id_ID/region-changing.txt +++ b/_pages/id_ID/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/id_ID/restoring-cfw.txt b/_pages/id_ID/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/id_ID/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/id_ID/seedminer.txt b/_pages/id_ID/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/id_ID/seedminer.txt +++ b/_pages/id_ID/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/id_ID/site-navigation.txt b/_pages/id_ID/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/id_ID/site-navigation.txt +++ b/_pages/id_ID/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/id_ID/updating-b9s.txt b/_pages/id_ID/updating-b9s.txt index 84d8eb17f1..7bc0a5a605 100644 --- a/_pages/id_ID/updating-b9s.txt +++ b/_pages/id_ID/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/it_IT/a9lh-to-b9s.txt b/_pages/it_IT/a9lh-to-b9s.txt index 1c00f34f39..5de8e67b1c 100644 --- a/_pages/it_IT/a9lh-to-b9s.txt +++ b/_pages/it_IT/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest Per estrarre i file `.7z` presenti in questa pagina, avrai bisogno di un gestore di file compressi come [7-Zip](http://www.7-zip.org/) o [The Unarchiver](https://theunarchiver.com/). -Se Luma3DS è configurato con un PIN di accesso, SafeB9SInstaller ti darà l'errore "OTP Crypto Fail" finché non lo avrai disabilitato (lo puoi riattivare dopo l'aggiornamento). +Nonostante riteniamo che l'uso di un custom firmware sia sicuro anche online, ci sono stati ban dal network online in passato, soprattutto per l'uso di cheat e comportamenti sospetti con l'eShop. {: .notice--warning} -{% capture notice-1 %} -È stata segnalata recentemente un'ondata di ban da parte di Nintendo riscontrata da utenti con CFW. Per proteggerti, per favore esegui i seguenti passaggi prima di iniziare questa guida: - -1. Entra nelle Impostazioni della Console, quindi in "Impostazioni Internet", poi "SpotPass" ed infine "Invio informazioni della console" -1. Disabilita l'impostazione "Invio informazioni della console" -1. Esci dalle Impostazioni della Console -1. Accedi alla lista di amici (l'[icona con un viso arancione]({{ "/images/friend-list-icon.png" | absolute_url }}) nella riga superiore del menu HOME) - + Se riscontri un errore e vieni rimandato al menu principale, o le impostazioni della lista di amici sono già state disattivate o la console non può connettersi ai server Nintendo (a causa di un ban o per problemi di connettività) -1. Vai nelle impostazioni della lista di amici, quindi "Imposta notifiche amici" ed infine "Vuoi mostrare il software in uso?" -1. Disabilita l'impostazione "Vuoi mostrare il software in uso?" -1. Esci dalla lista di amici - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### Cosa serve Tieni presente che il file `secret_sector.bin` qui richiesto è lo stesso che si trova nell'archivio `data_input.zip`. Se hai ancora quel file da qualche parte nell'hard disk, puoi utilizzarlo al posto di quello richiesto da scaricare in questa sezione. @@ -42,11 +26,10 @@ Solo su New 3DS, il file `secret_sector.bin` è necessario per ripristinare le m {: .notice--info} * - **Solo New 3DS:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* La versione 7.0.5 di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(il file `.7z`)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* La versione v7.0.5 di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(il file `.7z`)* * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* -* L'ultima versione di [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* ### Istruzioni @@ -57,8 +40,7 @@ Se durante questa sezione ti verrà chiesto di sovrascrivere dei file sulla tua 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copia il file `boot.3dsx` nella directory principale della tua scheda SD -1. Copia il file `boot.firm` dall'archivio `.zip` dell'ultima versione di Luma3DS nella directory principale della tua scheda SD +1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` dell'ultima versione di Luma3DS nella directory principale della tua scheda SD 1. Copia il file `arm9loaderhax.bin` dall'archivio`.7z` della versione 7.0.5 di Luma3DS nella directory principale della tua scheda SD 1. Elimina qualunque payload `.bin` dalla cartella `/luma/payloads/` della tua scheda SD in quanto non è utilizzabile con le versioni di boot9strap compatibili con Luma3DS 1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella cartella `/luma/payloads/` della tua scheda SD diff --git a/_pages/it_IT/bannerbomb3.txt b/_pages/it_IT/bannerbomb3.txt index a69f90db2e..091f3a769a 100644 --- a/_pages/it_IT/bannerbomb3.txt +++ b/_pages/it_IT/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Indice" %} +I metodi basati su Seedminer sono stati sostituiti da procedimenti più semplici e sicuri. Ritorna a [Cominciamo!](get-started) a meno che non ci siano motivi legittimi per cui tu debba seguire questa pagina (come dei tasti dorsali non funzionanti). +{: .notice--warning} + ### Lettura necessaria Per eseguire un dump dei DSiWare di sistema, approfittiamo di una falla di sicurezza nella sezione Gestione Nintendo DSiWare dell'applicazione Impostazioni della console. @@ -17,7 +20,7 @@ Queste istruzioni funzionano su console americane, europee, giapponesi e coreane * Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer) #### Sezione I - BannerBomb3 -1. Avvia [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) sul tuo computer +1. Avvia [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) sul tuo computer 1. Carica il tuo file movable.sed scegliendo l'opzione "Choose File" 1. Clicca "Go" + Verrà scaricato un DSiWare da usare come exploit chiamato `F00D43D5.bin`all'interno di un file zip (`tadmuffin_out.zip`) diff --git a/_pages/it_IT/checking-for-cfw.txt b/_pages/it_IT/checking-for-cfw.txt new file mode 100644 index 0000000000..9a72b8ee17 --- /dev/null +++ b/_pages/it_IT/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Verifica del CFW" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +Questa è una sezione aggiuntiva per controllare se la tua console possiede già un custom firmware moderno. + +Se la tua console possiede già un custom firmware basato su arm9loaderhax o su boot9strap, dovrai seguire le istruzioni indicate per aggiornarlo ad uno moderno. + +Se la tua console ha un CFW basato su menuhax, dovresti [cancellare gli exdata del menu Home](troubleshooting#clear-home-menu-extdata), poi seguire tutte le istruzioni sulla tua SysNAND. +{: .notice--primary} + +### Istruzioni + +1. Spegni la tua console +1. Premi il pulsante (Select) +1. Accendi la tua console continuando a tenere premuto il pulsante (Select) +1. Ora dovresti visualizzare un menu di configurazione di qualche tipo + +___ + +Se la tua console si avvia nel normale menu HOME, ritorna a [Cominciamo!](get-started) +{: .notice--success} + +Se vedi una versione di Luma3DS uguale o inferiore a 7.0.5, prosegui con la sezione [Da A9LH a B9S](a9lh-to-b9s) +{: .notice--primary} + +Se vedi una versione di Luma3DS pari a 7.1, prosegui con la sezione [Aggiornare B9S](updating-b9s) +{: .notice--primary} + +Se vedi una versione di Luma3DS uguale o superiore a 8.0, prosegui con la sezione [Ripristinare il CFW](restoring-cfw) +{: .notice--primary} + +Se vedi qualcosa non descritto nelle opzioni sopra, entra nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) e chiedi assistenza in Inglese. +{: .notice--danger} diff --git a/_pages/it_IT/credits.txt b/_pages/it_IT/credits.txt index b497f4ec1d..209c883ac5 100644 --- a/_pages/it_IT/credits.txt +++ b/_pages/it_IT/credits.txt @@ -2,6 +2,9 @@ title: "Riconoscimenti" --- +**Un ringraziamento speciale a Plailect, il creatore e manutentore originale della guida!** +{: .notice--primary} + **Un ringraziamento speciale a tutti gli utenti di [#Cakey su Freenode](http://webchat.freenode.net/?channels=%23Cakey)! Siete fantastici!** {: .notice--primary} @@ -22,7 +25,7 @@ Se ho dimenticato di inserirti in questa lista, contattami e ti aggiungerò. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Se ho dimenticato di inserirti in questa lista, contattami e ti aggiungerò. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Se ho dimenticato di inserirti in questa lista, contattami e ti aggiungerò. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/it_IT/dsidumper.txt b/_pages/it_IT/dsidumper.txt index a1c748902b..25011cbc59 100644 --- a/_pages/it_IT/dsidumper.txt +++ b/_pages/it_IT/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Indice" %} - -### Lettura necessaria - -Per eseguire il dump di DSiWare di sistema, utilizziamo un exploit per l'homebrew launcher già esistente. - -Se durante questa guida hai scoperto che l'applicazione Connessioni Nintendo DS non funziona, segui [TWLFix per Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) prima di continuare - -### Cosa serve - -* Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer) -* L'ultima versione di [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Sezione I - Preparazione - -1. Spegni il tuo 3DS -1. Inserisci la scheda SD nel tuo computer -1. Copia il tuo file `movable.sed` nella directory principale della tua scheda SD -1. Copia il file `DSiWare_Dump.3dsx` nella cartella `/3ds/` della tua scheda SD -1. Reinserisci la scheda SD nella tua console -1. Accendi la console - -#### Sezione II - Dump del DSiWare - -1. Avvia l'Homebrew Launcher tramite un qualunque metodo -1. Avvia DSiWare Dumper dalla lista degli homebrew disponibili - + Questo creerà una copia di un'applicazione DSiWare nella directory principale della scheda SD - + È normale ricevere vari errori. -1. Quando apparirà "Success", il file risultante è quello che userai per il backup DSiWare più avanti nella guida - -+ Prosegui con l'[Installazione di boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +Questa pagina è stata rimossa perché il metodo utilizzato è obsoleto. Utilizza un metodo più recente indicato alla pagina [Cominciamo!](get-started). +{: .notice--warning} diff --git a/_pages/it_IT/faq.txt b/_pages/it_IT/faq.txt index c906f14297..57170040c4 100644 --- a/_pages/it_IT/faq.txt +++ b/_pages/it_IT/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **R:** Sì **D:** *Come aggiorno Luma3DS?* -**R:** Usa [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**R:** Copia i file `boot.firm` e `boot.3dsx` dall'[ultima versione di Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) nella directory principale della scheda SD, sostituendo qualsiasi file esistente. **D:** *Ho sentito di questa cosa per cui dovrei pagare (Gateway, Sky3DS, ecc). È qualcosa che mi serve?* **R:** No. boot9strap permette il caricamento di file prima ancora dell’avvio del sistema. diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt index 67e8287a51..502fde4fa2 100644 --- a/_pages/it_IT/finalizing-setup.txt +++ b/_pages/it_IT/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Completamento dell'installazione" Il file `boot.firm` viene lanciato da boot9strap stesso al termine del caricamento dalla NAND, e può essere un qualunque payload arm9 valido in formato FIRM. Questo file può essere sostituito in qualunque momento, tuttavia Luma3DS permette il lancio di diversi payload arm9 in formato FIRM grazie al chainloader di Luma3DS. -In questo caso, useremo Luma3DS di [AuroraWright](https://github.com/AuroraWright/) per avviare direttamente una SysNAND patchata, bypassando del tutto il bisogno di una EmuNAND. Questo semplifica l'uso di un 3DS così modificato, e permette di risparmiare spazio sulla scheda SD. +In questo caso, useremo Luma3DS di [LumaTeam](https://github.com/LumaTeam/) per avviare direttamente una SysNAND patchata, bypassando del tutto il bisogno di una EmuNAND. Questo semplifica l'uso di un 3DS così modificato, e permette di risparmiare spazio sulla scheda SD. Durante la guida verranno anche configurate le seguenti applicazioni: + **FBI** *(installa i giochi e le applicazioni in formato CIA)* + **Anemone3DS** *(installa temi personalizzati)* + **Checkpoint** *(salva e ripristina backup dei salvataggi di giochi 3DS e DS)* -+ **Luma3DS Updater** *(aggiorna facilmente il CFW)* ++ **Universal-Updater** *(un'applicazione per scaricare homebrew direttamente sul 3DS tramite wifi)* + **GodMode9** *(applicazione multifunzione per gestire NAND e schede di gioco)* + **Homebrew Launcher Loader** *(avvia l'Homebrew Launcher)* + **DSP1** *(permette alle applicazioni homebrew di avere il sonoro)* @@ -25,12 +25,12 @@ Durante la guida verranno anche configurate le seguenti applicazioni: * L'ultima versione di [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(il file `.cia`)* * L'ultima versione di [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(il file `.cia`)* +* L'ultima versione di [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(il file `.cia`)* * L'ultima versione di [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * La versione v1.9.2pre1 di [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* L'ultima versione di [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* L'ultima versione di [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(il file `.cia`)* * L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/latest) *(i file `.cia` e `.3dsx`)* * Ultima versione di [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* L'ultima versione di [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(il file `.cia`)* ### Istruzioni @@ -39,15 +39,16 @@ Durante la guida verranno anche configurate le seguenti applicazioni: 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer 1. Se assente, crea una cartella chiamata `3ds` nella directory principale della tua scheda SD + + Questa cartella mantiene le applicazioni homebrew e i loro dati; è diversa dalla cartella `Nintendo 3DS` generata automaticamente dalla console 1. Se assente, crea una cartella chiamata `cias` nella directory principale della tua scheda SD 1. Copia il file `ctr-no-timeoffset.3dsx` nella cartella `/3ds/` nella tua scheda SD 1. Copia il file `FBI.3dsx` nella cartella `/3ds/` nella tua scheda SD 1. Copia il file `Homebrew_Launcher.cia` nella cartella `/cias/` della tua scheda SD -1. Copia il file `lumaupdater.cia` nella cartella `/cias/` della tua scheda SD 1. Copia il file `FBI.cia` nella cartella `/cias/` della tua scheda SD 1. Copia il file `DSP1.cia` nella cartella `/cias/` della tua scheda SD 1. Copia il file `Anemone3DS.cia` nella cartella `/cias/` della tua scheda SD 1. Copia il file `Checkpoint.cia` nella cartella `/cias/` della tua scheda SD +1. Copia il file `Universal-Updater.cia` nella cartella `/cias/` della tua scheda SD 1. Se assente, crea una cartella chiamata `payloads` nella cartella `luma` della tua scheda SD 1. Copia il file `GodMode9.firm` dall'archivio `.zip` di GodMode9 dentro la cartella `/luma/payloads/` della tua scheda SD 1. Copia la cartella `gm9` presente nell'archivio `.zip` di GodMode9 nella directory principale della tua scheda SD @@ -102,7 +103,7 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e #### Sezione VI - CTRNAND Luma3DS 1. Spegni il tuo 3DS -1. Avvia GodMode9 tenendo premuto (Start) durante l'accensione della console +1. Press and hold (Start), and while holding (Start), power on your device. Verrà avviato GodMode9 1. Se ti viene richiesto di creare un backup dei file essenziali, premi (A) per accettare, e al termine di nuovo (A) per proseguire 1. Se ti viene chiesto di reimpostare la data e l'ora dell'RTC, premi (A) per farlo, poi imposta la data e l'ora, infine premi (A) per continuare 1. Premi il pulsante HOME per far apparire il menu delle azioni @@ -150,18 +151,8 @@ ___ #### Informazioni e Note -{% capture notice-10 %} -Ora puoi usare Luma3DS Updater per aggiornare Luma3DS all'ultima versione disponibile. Devi solo aprire l'applicazione e premere (A). - -Questa operazione non è un aggiornamento della versione del software della console; serve solamente a scaricare ed estrarre automaticamente i file più recenti di Luma3DS. - -Questo aggiornerà i file di Luma3DS sulla tua scheda SD e nella CTRNAND, che è ciò che la console avvia quando non è presente una scheda SD. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Adesso avvierai di default il CFW Luma3DS sulla SysNAND. +Adesso avvierai di default il CFW Luma3DS. Puoi tenere premuto (Select) all'accensione della console per aprire il menu di Luma3DS. @@ -177,7 +168,7 @@ Puoi premere i pulsanti (L) + (Giù) + (Select) in qualunque momento per acceder {% capture notice-6 %} Se volessi utilizzare una scheda SD più capiente, devi solo formattare la nuova scheda SD come FAT32 e incollare all'interno della nuova scheda SD il contenuto della vecchia scheda SD. -Se la tua scheda SD dispone di più di 32GB di spazio, devi utilizzare un programma diverso per formattarla, come [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) su Windows, [gparted](http://gparted.org/download.php) su Linux, o [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) su Mac. +Se la tua nuova scheda SD è più grande di 32GB, dovrai utilizzare un'applicazione diversa per formattarla, come [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), o [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Per informazioni su come utilizzare le varie funzioni di GodMode9, visita la pag Per informazioni sulle varie caratteristiche di Luma3DS, leggi [la sua pagina wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -Per informazioni su come installare temi custom, medaglie e splash screen, visita [Theme Plaza](https://themeplaza.eu/). +Per informazioni sull'installazione di temi personalizzati e schermate iniziali, visita [Theme Plaza](https://themeplaza.art/). {: .notice--success} Per informazioni sull'utilizzo dei codici GateShark con Luma3DS, consulta la pagina [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/it_IT/flashing-ntrboot-(3ds-multi-system).txt b/_pages/it_IT/flashing-ntrboot-(3ds-multi-system).txt index 615cb1d456..aebe0d19f8 100644 --- a/_pages/it_IT/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/it_IT/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Tieni presente che in rare circostanze è possibile **brickare** una flashcart c * Due console 3DS + **Il 3DS di partenza**: la console della famiglia 3DS che ha già installato boot9strap + **Il 3DS di destinazione**: la console con versione del software originale -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap, non i file `devkit`)* +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; non il file devkit)* * L'ultima versione di [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Istruzioni diff --git a/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt b/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt index 0599aff706..04f25a269c 100644 --- a/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Tieni presente che in rare circostanze è possibile **brickare** una flashcart c ### Cosa serve * La flashcart compatibile con ntrboot -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap, non i file `devkit`)* +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; non il file devkit)* * L'ultima versione di [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Istruzioni diff --git a/_pages/it_IT/flashing-ntrboot-(nds).txt b/_pages/it_IT/flashing-ntrboot-(nds).txt index b1879073c7..8ff018d7ef 100644 --- a/_pages/it_IT/flashing-ntrboot-(nds).txt +++ b/_pages/it_IT/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Tieni presente che in rare circostanze è possibile **brickare** una flashcart c * Due console + **Il NDS / NDSL di partenza**: il Nintendo DS o Nintendo DS Lite compatibile con la tua flashcart + **Il 3DS di destinazione**: la console della famiglia 3DS con versione del software originale -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap, non i file `devkit`)* +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; non il file `devkit`)* * L'ultima versione di [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Istruzioni diff --git a/_pages/it_IT/formatting-sd-(linux).txt b/_pages/it_IT/formatting-sd-(linux).txt new file mode 100644 index 0000000000..24fa10e413 --- /dev/null +++ b/_pages/it_IT/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formattazione SD (Linux)" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +Questa è una sezione aggiuntiva per la formattazione di una scheda SD per il 3DS. + +Se il 3DS riconosce già la scheda SD, questa parte non è necessaria. + +Questa pagina è solo per utenti Linux. Se non stai utilizzando Linux, puoi seguire la guida alle pagine [Formattazione SD (Windows)](formatting-sd-(windows)) o [Formattazione SD (Mac)](formatting-sd-(mac)). + +### Istruzioni +#### Sezione I - Determinare in quale slot si trova la scheda SD + +1. Assicurati che la tua scheda SD **non** sia inserita +1. Avvia un terminale Linux +1. Digita `watch "lsblk"` +1. Inserisci la scheda SD nel PC +1. Osserva l'output. Dovrebbe corrispondere a qualcosa del genere: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Prendi nota del mount point del dispositivo. Nell'esempio, era `mmcblk0` + + Se `RO` è a 1, assicurati che l'interruttore di blocco non sia attivo +1. Premi CTRL + C per uscire + +#### Sezione II - Formattare la scheda + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Digita `sudo cfdisk /dev/(mount point del dispositivo rilevato prima)` +1. Per ogni partizione, seleziona `Delete` +1. Crea una nuova partizione Primaria che copra l'intera dimensione della scheda SD + + Questo creerà una nuova partizione con il filesystem di linux +1. Seleziona il tipo e controlla il menù +1. Trova "W95 FAT32" e prendi nota del codice sulla parte sinistra della scritta +1. Premi qualsiasi tasto, quindi inserisci il codice di cui hai preso nota nel passaggio precedente +1. Premi invio, infine clicca Quit diff --git a/_pages/it_IT/formatting-sd-(mac).txt b/_pages/it_IT/formatting-sd-(mac).txt new file mode 100644 index 0000000000..32787dfc80 --- /dev/null +++ b/_pages/it_IT/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formattazione SD (Mac)" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +Questa è una sezione aggiuntiva per la formattazione di una scheda SD per il 3DS. + +Se il 3DS riconosce già la scheda SD, questa parte non è necessaria. + +Questa pagina è solo per utenti Mac. Se non stai utilizzando un Mac, puoi seguire la guida alle pagine [Formattazione SD (Windows)](formatting-sd-(Windows)) o [Formattazione SD (Linux)](formatting-sd-(linux)). + +### Istruzioni + +#### OS X El Capitan (10.11) e successivi + +1. Inserisci la scheda SD nel tuo computer +1. Se la scheda SD ha file o cartelle al suo interno, copia tutto in una cartella sul tuo computer +1. Avvia l'applicazione Utility Disco +1. Nel menu "Visualizza" in alto a sinistra, seleziona "Mostra tutti i dispositivi" +1. Seleziona la tua scheda SD nel pannello di sinistra + + Assicurati di scegliere il dispositivo corretto, altrimenti potresti cancellare accidentalmente l'unità sbagliata! + {: .notice--danger} + +1. Clicca su "Cancella" in cima +1. Inserisci un testo a piacere su "Nome" +1. Assicurati che "Formato" sia impostato su "MS-DOS (FAT)" +1. Assicurati che "Schema" sia impostato su "Master Boot Record" + + Se "Schema" non appare, clicca su "Annulla" e assicurati di scegliere il dispositivo invece di un volume +1. Clicca su "Cancella" +1. Attendi il termine della formattazione +1. Clicca su "Chiudi" +1. Se la scheda SD aveva precedentemente file o cartelle al suo interno, ricopia il contenuto dal tuo computer + +#### OS X Yosemite (10.10) e precedenti + +1. Inserisci la scheda SD nel tuo computer +1. Se la scheda SD ha file o cartelle al suo interno, copia tutto in una cartella sul tuo computer +1. Avvia l'applicazione Utility Disco +1. Seleziona la tua scheda SD nel pannello di sinistra + + Assicurati di scegliere il dispositivo corretto, altrimenti potresti cancellare accidentalmente l'unità sbagliata! + {: .notice--danger} + +1. Clicca su "Partizione" in cima + + Se "Partitione" non appare, assicurati di scegliere il dispositivo invece di un volume +1. Assicurati che "Layout Partizione" sia impostato su "1 Partizione" +1. Inserisci un testo a piacere su "Nome" +1. Assicurati che "Formato" sia impostato su "MS-DOS (FAT)" +1. Clicca su "Opzioni" sotto la tabella delle partizioni +1. Scegli "Master Boot Record" +1. Clicca "OK" +1. Clicca su "Applica" +1. Clicca su "Partizione" +1. Attendi il termine della formattazione +1. Chiudi Utility Disco +1. Se la scheda SD aveva precedentemente file o cartelle al suo interno, ricopia il contenuto dal tuo computer diff --git a/_pages/it_IT/formatting-sd-(windows).txt b/_pages/it_IT/formatting-sd-(windows).txt new file mode 100644 index 0000000000..470d1be945 --- /dev/null +++ b/_pages/it_IT/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formattazione SD (Windows)" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +Questa è una sezione aggiuntiva per la formattazione di una scheda SD per il 3DS. + +Se il 3DS riconosce già la scheda SD, questa parte non è necessaria. + +Questa pagina è solo per utenti Windows. Se non stai utilizzando Windows, puoi seguire la guida alle pagine [Formattazione SD (Linux)](formatting-sd-(linux)) o [Formattazione SD (Mac)](formatting-sd-(mac)). + +### Cosa serve + +* L'ultima versione di [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Istruzioni + +1. Inserisci la scheda SD nel tuo computer +1. Se la scheda SD ha file o cartelle al suo interno, copia tutto in una cartella sul tuo computer +1. Esegui `guiformat.exe` +1. Seleziona su "Drive" la lettera del drive della tua scheda SD + + Assicurati di scegliere la lettera del drive corretta, altrimenti potresti cancellare accidentalmente l'unità sbagliata! + {: .notice--danger} + +1. Seleziona la dimensione corretta su "Allocation unit size" + + Se la scheda SD è 64GB o inferiore, scegli 32768 + * Se la scheda SD è più di 64GB, scegli 65536 +1. Inserisci qualunque cosa su "Volume label" +1. Assicurati che "Quick Format" sia selezionato +1. Seleziona "Start" +1. Clicca "OK" +1. Attendi il termine della formattazione +1. Clicca su "Chiudi" +1. Se la scheda SD aveva precedentemente file o cartelle al suo interno, ricopia il contenuto dal tuo computer + +### Errori Comuni + +* Impossibile aprire il dispositivo: GetLastError()=32 + + Chiudi tutto ciò che potrebbe stare utilizzando la scheda SD, come ad esempio qualunque schermata Esplora Risorse. diff --git a/_pages/it_IT/get-started-(new-3ds).txt b/_pages/it_IT/get-started-(new-3ds).txt index 276e4fcb34..72695315b4 100644 --- a/_pages/it_IT/get-started-(new-3ds).txt +++ b/_pages/it_IT/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Cominciamo! (New 3DS)" ### Lettura necessaria -Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0. - -Inoltre, ricorda che l'ultimo numero della tua versione di sistema (quello preceduto da un trattino) si riferisce alla tua versione del browser internet. Al momento, tale versione è irrilevante allo scopo della guida. - -**Se non sei in grado di seguire le instruzioni per la tua versione del software data la mancanza di alcuni prerequisiti, dovresti seguire un metodo nella colona "Tutte le Versioni" in quanto funzionerebbe a prescindere dalla versione di sistema.** - -Puoi effettuare in qualunque caso un [aggiornamento con scheda di gioco](cart-update) (o un normale aggiornamento del sistema) ad una versione successiva della stessa colonna per poter seguirne le istruzioni. +Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Puoi vedere quale versione del software possiedi selezionando le Impostazioni della console e guardando in basso a destra sullo schermo superiore. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +Nonostante riteniamo che l'uso di un custom firmware sia sicuro anche online, ci sono stati ban dal network online in passato, soprattutto per l'uso di cheat e comportamenti sospetti con l'eShop. +{: .notice--warning} + ### Tabella delle versioni - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
DaADaAAzione
2.1.02.1.0Installazione di boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installazione di boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Usa un metodo per "tutte le versioni"11.13.0Installazione di boot9strap (SSLoth-Browser)
11.8.011.8.0Installazione di boot9strap (DSiWare)11.14.0 (più recente)Installazione di boot9strap (Browser)
TUTTE LE VERSIONI

ntrboot
(Richiede una flashcart compatibile)

or

Installazione di boot9strap (Hardmod)
(Richiede fare saldature)

ntrboot
(Richiede una flashcart compatibile)

o

Installazione di boot9strap (Hardmod)
(Richiede fare saldature)
diff --git a/_pages/it_IT/get-started-(old-3ds).txt b/_pages/it_IT/get-started-(old-3ds).txt index 295033d949..90aab69d1d 100644 --- a/_pages/it_IT/get-started-(old-3ds).txt +++ b/_pages/it_IT/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Cominciamo! (Old 3DS)" ### Lettura necessaria -Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0. - -Inoltre, ricorda che le ultime due colonne della tabella si riferiscono all'ultimo numero della tua versione (che corrisponde alla versione del browser installata nel sistema). Se la versione termina con -0 allora non hai un browser, mentre qualsiasi altro numero superiore a -0 indica che è installato un browser. - -Ad esempio, se dovessi avere la versione del software "5.0.0-0U", seguirai la colonna "Senza Browser" e la riga "da 5.0.0 a 5.1.0." perché la versione del software di sistema è inclusa in tale intervallo e non è presente un browser installato. - -**Se non sei in grado di seguire le instruzioni per la tua versione del software data la mancanza di alcuni prerequisiti, dovresti seguire un metodo nella colona "Tutte le Versioni" in quanto funzionerebbe a prescindere dalla versione di sistema.** - -Puoi effettuare in qualunque caso un [aggiornamento con scheda di gioco](cart-update) (o un normale aggiornamento del sistema) ad una versione successiva della stessa colonna per poter seguirne le istruzioni. +Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Puoi vedere quale versione del software possiedi selezionando le Impostazioni della console e guardando in basso a destra sullo schermo superiore. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +Nonostante riteniamo che l'uso di un custom firmware sia sicuro anche online, ci sono stati ban dal network online in passato, soprattutto per l'uso di cheat e comportamenti sospetti con l'eShop. +{: .notice--warning} + ### Tabella delle versioni @@ -33,49 +28,23 @@ Puoi vedere quale versione del software possiedi selezionando le Impostazioni de - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Da ASenza BrowserCon BrowserAzione
1.0.02.0.0Usa un metodo per "tutte le versioni"
2.1.02.1.0Usa un metodo per "tutte le versioni"Installazione di boot9strap (2xrsa)
2.2.02.2.0Usa un metodo per "tutte le versioni"
3.0.08.1.0Installazione di boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Usa un metodo per "tutte le versioni"Installazione di boot9strap (Soundhax)
11.8.011.8.0Installazione di boot9strap (DSiWare)
11.4.011.14.0Installazione di boot9strap (safecerthax)
TUTTE LE VERSIONI

ntrboot
(Richiede una flashcart compatibile)

or

Installazione di boot9strap (Hardmod)
(Richiede fare saldature)

ntrboot
(Richiede una flashcart compatibile)

o

Installazione di boot9strap (Hardmod)
(Richiede fare saldature)
\ No newline at end of file + diff --git a/_pages/it_IT/get-started.txt b/_pages/it_IT/get-started.txt index a5aa4a9660..dc2294fff1 100644 --- a/_pages/it_IT/get-started.txt +++ b/_pages/it_IT/get-started.txt @@ -6,85 +6,16 @@ title: "Cominciamo!" ### Lettura necessaria -Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0. - -Puoi vedere quale versione del software possiedi selezionando le Impostazioni della console e guardando in basso a destra sullo schermo superiore. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**Se non sei in grado di seguire le istruzioni per la tua versione del software data la mancanza di alcuni prerequisiti, dovresti aggiornare la tua console alla versione più recente oppure seguire un metodo nella colona "Tutte le Versioni" in quanto funzionerebbe a prescindere dalla versione di sistema.** - -Puoi effettuare in qualunque caso un [aggiornamento con scheda di gioco](cart-update) (o un normale aggiornamento del sistema) ad una versione successiva della stessa colonna per poter seguirne le istruzioni. - -Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su EmuNAND, segui tutti i passaggi mentre sei in SysNAND. Se richiesto, sostituisci qualunque file già esistente. Potrai trasferire i tuoi dati dall'EmuNAND alla SysNAND con B9S alla fine dell'installazione. Se usi menuhax, dovresti [cancellare gli extdata del menu HOME](troubleshooting#clear-home-menu-extdata) per rimuoverlo prima di iniziare questa guida. - -In questa sezione verrà spiegato come installare boot9strap su un 3DS o 2DS *senza alcun custom firmware installato*. Se hai già installato arm9loaderhax e stai cercando di aggiornare a boot9strap, vai alla pagina [Da A9LH a B9S](a9lh-to-b9s). -{: .notice--primary} - -Prima di iniziare, gli utenti Windows dovrebbero attivare l'opzione per visualizzare le estensioni dei file. Basta seguire le istruzioni indicate nella pagina delle [Estensioni dei file (Windows)](file-extensions-(windows))! -{: .notice--info} - -Prima di iniziare è consigliabile verificare che la tua scheda SD sia priva di errori usando [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)) o [F3X (Mac)](f3x-(mac))! +Se in passato hai modificato il tuo 3DS, oppure hai acquistato un 3DS di seconda mano, è possibile che la tua console abbia già un custom firmware. Dovresti [verificare la presenza di un CFW](checking-for-cfw) prima di procedere. {: .notice--warning} -{% capture notice-1 %} -Anche se riteniamo che l'uso di un custom firmware in questo momento sia relativamente sicuro, è importante tenere presente che non sarà mai al 100% senza rischio di ban. +Console di modello, versione del software e regione diversi richiederanno procedure differenti per installare correttamente il Custom Firmware tramite boot9strap. In questa pagina potrai trovare il corretto punto di partenza per la tua console. -Dovresti evitare le seguenti azioni: -1. Pirateria -1. Trucchi online -1. Comportamenti sospetti nell'eShop (ad esempio, contestazioni di addebiti con la carta di credito) +Il colore delle console nelle immagini potrebbe variare, ma verifica attentamente la disposizione dei pulsanti e la forma della console per assicurarti di selezionare quella corretta. -Riteniamo che SpotPass e StreetPass siano tranquillamente utilizzabili in questo momento. -{% endcapture %} +Clicca sull'immagine della tua console per proseguire alla sezione corretta della guida. -
{{ notice-1 | markdownify }}
- -### Tabella delle versioni - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DaAAzione
1.0.02.0.0Aggiorna all'ultimo firmware o usa un metodo per "tutte le versioni"
2.1.08.1.0Installazione di boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Aggiorna all'ultimo firmware o usa un metodo per "tutte le versioni"
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
TUTTE LE VERSIONI

ntrboot
(Richiede una flashcart compatibile)

o

Installazione di boot9strap (Hardmod)
(Richiede fare saldature)

+| New 3DS o New 2DS | Old 3DS o Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/it_IT/godmode9-usage.txt b/_pages/it_IT/godmode9-usage.txt index dd23a02b45..2290b1d9a0 100644 --- a/_pages/it_IT/godmode9-usage.txt +++ b/_pages/it_IT/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "Usare GodMode9" {% include toc title="Indice" %} -Per ricevere supporto su GodMode9, aiuto per gli script e informazioni sugli ultimi aggiornamenti, entra nel [server Discord di GodMode9](https://discord.gg/EGu6Qxw) (in Inglese). +Per ricevere supporto su GodMode9, aiuto per gli script e informazioni sugli ultimi aggiornamenti, entra nel [server Discord di GodMode9](https://discord.gg/BRcbvtFxX4) (in Inglese). {: .notice--primary} ### Lettura necessaria diff --git a/_pages/it_IT/home.txt b/_pages/it_IT/home.txt index 4cf29613bc..3e037043fd 100644 --- a/_pages/it_IT/home.txt +++ b/_pages/it_IT/home.txt @@ -63,7 +63,7 @@ Per una lista di tutte le firme di sighax, è possibile consultare [questo gist] ## Cosa posso fare con un Custom Firmware? + Giocare tutte le schede di gioco e tutti titoli dell'eShop, indipendentemente dalla regionalità -+ Personalizza il tuo Menu HOME con [temi e splash screen](https://themeplaza.eu/) creati dagli utenti ++ Personalizzare il tuo menu HOME con [temi e schermate iniziali](https://themeplaza.art/) create dagli utenti + Applicare "ROMhack" a giochi posseduti + Catturare screenshot di applicazioni e giochi + Fare un backup, modificare e ripristinare i salvataggi di molti giochi @@ -78,11 +78,11 @@ Per una lista di tutte le firme di sighax, è possibile consultare [questo gist] + **Prima di seguire la guida, è necessario che tu conosca il rischio dell'hacking di un 3DS: OGNI volta che si modifica il sistema c'è sempre il rischio di un brick IRREVERSIBILE. È raro ma può sempre capitare, quindi assicurati di seguire ESATTAMENTE OGNI SINGOLO PASSAGGIO.** + Se hai già modificato in precedenza il tuo 3DS per configurare un'EmuNAND e vorresti spostare il contenuto dell'EmuNAND nel nuovo CFW SysNAND, segui tutte le istruzioni per ripristinare l'EmuNAND una volta raggiunta la sezione [Completamento dell'installazione](finalizing-setup). -+ Questa guida è applicabile a New 3DS, Old 3DS, New 2DS e Old 2DS di ogni regione e con versione del software 11.13.0 o inferiore. ++ Questa guida funzionerà su New 3DS, Old 3DS, New 2DS, e Old 2DS in tutte le regioni e tutte le versioni, compresa l'ultima versione (11. 4.0). + Seguendo correttamente la guida non perderai alcun dato e manterrai tutto ciò che era installato nella console (per cui giochi, NNID, salvataggi, ecc verranno tutti conservati). + Mantieni sempre la console in carica per evitare la perdita di dati o danni derivanti dall'improvviso spegnimento della console! + La tua scheda SD dovrebbe essere [MBR e non GPT](http://www.howtogeek.com/245610/) (la scheda SD preconfezionata con la console è MBR di default). Il modo più semplice per verificarlo è controllare che la scheda SD funzioni nel tuo 3DS. Se funziona, la scheda SD è MBR. -+ Se devi formattare una nuova scheda SD, puoi usare [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) e impostare Allocation Unit Size a 32K (32768). ++ Se devi formattare una nuova scheda SD, puoi formattarla in formato FAT32 usando [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), o [cfdisk (Linux)](formatting-sd-(linux)). + A livello di software, un Old 2DS è essenzialmente identico a un Old 3DS, mentre un New 2DS è essenzialmente identico ad un New 3DS. Qualunque istruzione indicante "Old 3DS" si applica anche agli Old 2DS, e qualunque istruzione relativa ai "New 3DS" si applica ai New 2DS. ___ diff --git a/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt b/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt index 1021defcd9..6d4628358d 100644 --- a/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Indice" %} - -### Lettura necessaria - -Questo metodo di accesso all'Homebrew Launcher si avvale di alcune sviste nel Browser Internet nativo del 3DS. - -### Test Di Compatibilità - -Per utilizzare questo metodo, la console deve provenire da una regione compatibile con una versione del browser compatibile. - -È possibile verificare questi dettagli su Impostazioni della console. - -1. Apri le Impostazioni della console. -1. Nell'angolo in basso a destra dello schermo superiore vedrai una stringa che indica la versione del software in un formato simile a `11.13.0-45x`. - + Il 45 indica la versione del browser, e la lettera è la tua regione - + Se la versione del browser è inferiore a 45, è necessario aggiornare la console tramite l'opzione "Aggiornamento" nelle Impostazioni della console - + E indica EUROPA - + U indica USA - + J indica GIAPPONE - + Se la tua console ha una lettera diversa da queste tre, non è compatibile con questo metodo. -1. Tieni a mente la tua regione d'appartenenza. Ti servirà più tardi. - -### Cosa serve - -* L'ultima versione di [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* L'archivio dell'ultima versione di BrowserHax [[per Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [per New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old indica il modello della tua console. Se non sei sicuro di quale modello hai, consulta [questa immagine](https://3ds.eiphax.tech/pic/newold.png) -* Una connessione WiFi attiva sulla tua console - -### Istruzioni - -#### Sezione I - Preparazione - -1. Spegni la tua console e rimuovi la scheda SD -1. Inserisci la scheda SD nel tuo computer -1. Copia il file `boot.3dsx` dai file scaricati dell'Homebrew Launcher nella directory principale della tua scheda SD - + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno -1. Nell'archivio di BrowserHax, apri la cartella corrispondente alla regione della tua console -1. Copia la cartella `3ds` e i file `browserhax_hblauncher_ropbin_payload.bin` e `arm11code.bin` qui presenti nella directory principale della tua scheda SD - + Ora dovresti avere una cartella `Nintendo 3DS`, una cartella `3ds` e i due file `.bin` nella directory principale della scheda SD - -#### Sezione II - BrowserHax - -1. Apri [questa immagine](https://3ds.eiphax.tech/pic/hax.png) in una nuova scheda o finestra sul tuo computer -1. Rimuovi in modo sicuro la scheda SD dal computer e reinseriscila nella console -1. Accendi la tua console e assicurati che sia connessa a una rete WiFi attiva -1. Dal menu HOME premi contemporaneamente i pulsanti L e R - + Dovrebbe avviarsi lo Scanner QR. In caso contrario, USM (la parte successiva per l'avvio del custom firmware) non potrà funzionare. Dovrai usare un [metodo tradizionale](legacy-methods) - + Se devi digitare l'URL, è `https://zoogie.github.io/web/nbhax/` -1. Usa lo scanner QR per scansionare il codice QR aperto nel primo passo -1. Tocca il pulsante "PROCEED TO HAXX" -1. Attendi il termine del processo - + Se appare uno schermo giallo, spegni la console dopodiché ritenta questa sezione -1. Se l'exploit ha avuto successo, la tua console avrà caricato l'Homebrew Launcher - + Potresti riscontrare un errore relativo all'assenza di applicazioni. In tal caso, puoi procedere alla fase successiva -1. Lascia la console accesa e procedi alla sezione successiva indicata qui sotto - - -___ - -### Prosegui con l'[Installazione di boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +Questa pagina è stata rimossa perché il metodo utilizzato è obsoleto. Utilizza un metodo più recente indicato alla pagina [Cominciamo!](get-started). +{: .notice--warning} diff --git a/_pages/it_IT/homebrew-launcher-(pichaxx).txt b/_pages/it_IT/homebrew-launcher-(pichaxx).txt index 01575a63b1..dd24499278 100644 --- a/_pages/it_IT/homebrew-launcher-(pichaxx).txt +++ b/_pages/it_IT/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Indice" %} +I metodi basati su Seedminer sono stati sostituiti da procedimenti più semplici e sicuri. Ritorna a [Cominciamo!](get-started) a meno che non ci siano motivi legittimi per cui tu debba seguire questa pagina (come dei tasti dorsali non funzionanti). +{: .notice--warning} + ### Lettura necessaria Seedminer utilizza il tuo file `movable.sed` per ottenere accesso all'Homebrew Launcher tramite l'exploit PicHaxx per iniettare una particolare applicazione DSiWare nell'applicazione DS "Modalità download". Questo metodo richiede il possesso (o lo scaricamento) del gioco gratuito "Pokémon Picross" dall'eShop. -Se la tua console ha già accesso all'Homebrew Launcher (tramite PicHaxx o con un altro exploit), puoi passare direttamente al [DSiWare Dumper](dsidumper)). +Se la tua console ha già accesso all'Homebrew Launcher (tramite PicHaxx o con un altro exploit), puoi passare direttamente a [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} Se possiedi già Pokémon Picross, questo processo sovrascriverà il tuo salvataggio! @@ -19,7 +22,8 @@ Se possiedi già Pokémon Picross, questo processo sovrascriverà il tuo salvata * Il gioco gratuito "Pokémon Picross", scaricabile dall'eShop * Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer) * L'ultima versione di [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* Il file [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(adatto alla versione e alla regione della console)* +* Il file [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(adatto alla regione, console e versione della stessa)* + + Se la tua versione attuale è 11.14.0-46, seleziona 11.13.0-45 come versione ### Istruzioni @@ -27,26 +31,26 @@ Se possiedi già Pokémon Picross, questo processo sovrascriverà il tuo salvata 1. Copia il file `boot.3dsx` nella directory principale della tua scheda SD 1. Copia il file otherapp payload nella directory principale della tua scheda SD e rinominalo in `otherapp.bin` - + se non vedi l'estensione `.bin`, non aggiungerla alla fine del nome del file + + Se non vedi l'estensione `.bin`, non aggiungerla alla fine del nome del file 1. Se assente, crea una cartella chiamata `3ds` nella directory principale della tua scheda SD #### Sezione II - PicHaxx -1. Apri [il sito di PicHaxx Injector](https://seedminer.hacks.guide/pichaxx/) sul tuo computer +1. Apri [il sito di PicHaxx Injector](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) sul tuo computer 1. Seleziona il tuo file `movable.sed` 1. Seleziona "Build and Download" 1. Attendi il termine del processo 1. Nella tua scheda SD, entra nella cartella `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) - + Questa cartella `` all'interno della cartella `` avrà un nome di 32 lettere e numeri -1. Copia il file appena scaricato (`00000001.sav`) nella cartella `data` della tua scheda SD + + `` è una cartella dal nome lungo 32 caratteri all'interno di `` +1. Copia il file `00000001.sav` appena scaricato nella cartella `data` della tua scheda SD + Sovrascrivi il salvataggio precedente quando richiesto 1. Reinserisci la scheda SD nella tua console 1. Accendi la console 1. Avvia "Pokémon Picross" 1. Se l'exploit ha avuto successo, la tua console avrà caricato l'Homebrew Launcher - + Potresti riscontrare un errore relativo all'assenza di applicazioni. -1. Spegni la tua console. + + Potresti riscontrare un errore relativo all'assenza di applicazioni +1. Spegni il tuo 3DS ___ diff --git a/_pages/it_IT/homebrew-launcher-(soundhax).txt b/_pages/it_IT/homebrew-launcher-(soundhax).txt index 4cc4c9ea3d..86ce0eed3a 100644 --- a/_pages/it_IT/homebrew-launcher-(soundhax).txt +++ b/_pages/it_IT/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Assicurati che la comunicazione wireless sia attiva dato che udsploit (usato nel Tieni presente che tramite scheda di gioco vengono aggiornate solamente le applicazioni principali del sistema, come le Impostazioni della console, il menu HOME, ecc. Non vengono invece aggiornate le funzionalità come Sound Nintendo 3DS o le funzionalità che necessitano di Internet, come ad esempio il Trasferimento dati, il Browser Internet, la Piazza Mii StreetPass o l'eShop. -Ciò significa che se aggiorni con una scheda di gioco da una versione avente una versione di Sound Nintendo 3DS obsoleta *(<3.0.0)* ad una versione con la stessa applicazione aggiornata, Soundhax non funzionerà! Dovrai utilizzare un [metodo alternativo](homebrew-launcher-(alternatives)) per avviare l'Homebrew Launcher! +Ciò significa che se aggiorni con una scheda di gioco da una versione avente una versione di Sound Nintendo 3DS obsoleta *(<2.1.0)* ad una versione con la stessa applicazione aggiornata, Soundhax non funzionerà! Dovrai utilizzare un [metodo alternativo](homebrew-launcher-(alternatives)) per avviare l'Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ Ciò significa che se aggiorni con una scheda di gioco da una versione avente un ### Cosa serve * L'ultima versione di [Soundhax](http://soundhax.com) *(adatta alla regione, tipo e versione della console)* + + Se Soundhax appare nel tuo browser come un video non riproducibile, premi Ctrl+S o Cmd+S per salvarlo sul tuo computer * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [safehax](https://github.com/TiniVi/safehax/releases/latest) *(il file `.3dsx`)* * L'ultima versione di [udsploit](https://github.com/smealum/udsploit/releases/latest) -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Il file [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(adatto alla versione e alla regione della console)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* Il file [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(adatto alla versione, console e regione della console)* ### Istruzioni diff --git a/_pages/it_IT/homebrew-launcher-(steelhax).txt b/_pages/it_IT/homebrew-launcher-(steelhax).txt index bec53e8af8..143253329c 100644 --- a/_pages/it_IT/homebrew-launcher-(steelhax).txt +++ b/_pages/it_IT/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Indice" %} - -### Lettura necessaria - -Seedminer utilizza il tuo file `movable.sed` per ottenere accesso all'Homebrew Launcher tramite l'exploit Steelhax per iniettare una particolare applicazione DSiWare nell'applicazione DS "Modalità download". Questo metodo richiede il possesso (o lo scaricamento) del gioco gratuito "Steel Diver: Sub Wars" dall'eShop. - -Se la tua console ha già accesso all'Homebrew Launcher (tramite Steelhax o con un altro exploit), puoi passare direttamente al [DSiWare Dumper](dsidumper)). -{: .notice--success} - -Se possiedi già Steel Diver: Sub Wars, questo processo sovrascriverà il tuo salvataggio! +Questa pagina è stata rimossa perché il metodo utilizzato è obsoleto. Utilizza un metodo più recente indicato alla pagina [Cominciamo!](get-started). {: .notice--warning} - -### Cosa serve - -* Il gioco gratuito "Steel Diver: Sub Wars" scaricabile dall'eShop -* Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer) -* L'ultima versione di [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* L'ultima versione di [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* Il file [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(adatto alla versione e alla regione della console)* - -### Istruzioni - -#### Sezione I - Preparazione - -1. Se assente, crea una cartella chiamata `3ds` nella directory principale della tua scheda SD -1. Copia il file `boot.3dsx` nella directory principale della tua scheda SD -1. Copia la cartella `steelhax` presente nell'archivio `Steelhax-release.zip` nella directory principale della tua scheda SD -1. Copia il file otherapp payload nella cartella `steelhax` della tua scheda SD e rinominalo in `payload.bin` - -#### Sezione II - Steelminer - -1. Inserisci la scheda SD nella tua console -1. Avvia "Steel Diver: Sub Wars" e seleziona un Mii per inizializzare il salvataggio - + Rifiuta l'aggiornamento di gioco quando richiesto - + Se hai già aggiornato il gioco, rimuovi l'aggiornamento tramite il menu Gestione dati nelle Impostazioni della console -1. Chiudi "Steel Diver: Sub Wars" -1. Spegni il tuo 3DS -1. Inserisci la scheda SD nel tuo computer -1. Apri [il sito di Steelminer Injector](https://seedminer.hacks.guide/steelhax/) sul tuo computer -1. Seleziona il tuo file `movable.sed` -1. Seleziona "Start!" -1. Attendi il termine del processo -1. Nella tua scheda SD, entra nella cartella `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `` -> `data` - + **Regione EUR**: `000d7e00` - + **Regione JPN**: `000d7c00` - + **Regione USA**: `000d7d00` -1. Copia il file appena scaricato nella cartella `data` della tua scheda SD - + Sovrascrivi il salvataggio precedente quando richiesto -1. Reinserisci la scheda SD nella tua console -1. Accendi la console -1. Avvia "Steel Diver: Sub Wars" -1. Se l'exploit ha avuto successo, la tua console avrà caricato l'Homebrew Launcher - + Potresti riscontrare un errore relativo all'assenza di applicazioni. -1. Spegni la tua console. - -___ - -### Prosegui con [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/it_IT/installing-boot9strap-(browser).txt b/_pages/it_IT/installing-boot9strap-(browser).txt index cdaa6d3a64..a474bf6085 100644 --- a/_pages/it_IT/installing-boot9strap-(browser).txt +++ b/_pages/it_IT/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installazione di boot9strap (Browser)" {% include toc title="Indice" %} +### Lettura necessaria + +new-browserhax-xl (combinato a universal-otherapp) è compatibile con la versione del software 11.14.0 su New 3DS e New 2DS per tutte le regioni. + +Questo exploit non funzionerà su Old 3DS, Old 3DS XL, o Old 2DS. Assicurati che la console che stai modificando sia un New 3DS, New 3DS XL, o un New 2DS XL prima di continuare. +{: .notice--info} + ### Cosa serve +* L'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Istruzioni @@ -16,24 +24,21 @@ title: "Installazione di boot9strap (Browser)" 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer +1. Copia il file `otherapp.bin` nella directory principale della tua scheda SD e rinominalo in `arm11code.bin` + + Se non vedi l'estensione `.bin`, non aggiungerla alla fine del nome del file 1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD -1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD -1. Copia i file `SafeB9SInstaller.dat` e `Launcher.dat` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `boot9strap` della tua scheda SD +1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD 1. Reinserisci la scheda SD nella tua console 1. Accendi la console #### Sezione II - Avvio di SafeB9SInstaller -1. Avvia il Browser internet e visita una delle seguenti pagine dalla tua console - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Può capitare che una pagina non carichi l'exploit correttamente; tenta ogni pagina finché non viene avviato con successo (a volte funziona solo la prima, a volte le ultime due) +1. Accendi la console +1. Nel menu HOME, premi i pulsanti dorsali L e R per avviare la fotocamera + + Se non riesci ad aprire la fotocamera, raggiungi manualmente l'URL (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tocca il pulsante Codice QR e scansiona [questo codice QR](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + Se ottieni un errore, [segui questa guida per risolvere il problema](troubleshooting#a-browser-based-exploit-is-not-working) 1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installazione di boot9strap (Browser)" 1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + **"Show NAND or user string in System Settings"** 1. Premi (Start) per salvare e riavviare il 3DS - + Se ottieni un errore, continua comunque alla pagina successiva ___ diff --git a/_pages/it_IT/installing-boot9strap-(fredtool).txt b/_pages/it_IT/installing-boot9strap-(fredtool).txt index 465cb9672e..7ac915e475 100644 --- a/_pages/it_IT/installing-boot9strap-(fredtool).txt +++ b/_pages/it_IT/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installazione di Boot9strap (Fredtool)" {% include toc title="Indice" %} +I metodi basati su Seedminer sono stati sostituiti da procedimenti più semplici e sicuri. Ritorna a [Cominciamo!](get-started) a meno che non ci siano motivi legittimi per cui tu debba seguire questa pagina (come dei tasti dorsali non funzionanti). +{: .notice--warning} + ### Lettura necessaria Seedminer utilizza il tuo file `movable.sed` per decriptare un qualunque titolo DSiWare per iniettare una particolare applicazione DSiWare nell'applicazione Connessioni Nintendo DS. Questo richiede un backup DSiWare, ad esempio da BannerBomb o da DSiWare Dumper. @@ -12,11 +15,11 @@ Questa è un'implementazione funzionante dell'exploit del "testo in chiaro noto ### Cosa serve -* Un backup DSiWare (come quello sulla directory principale della scheda SD proveniente da [BannerBomb3](bannerbomb3) o da [DSiWare Dumper](dsidumper)) +* Un backup DSiWare (come quello sulla directory principale della scheda SD proveniente da [BannerBomb3](bannerbomb3)) * Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer) * L'ultima versione di [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * L'ultima versione di [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sezione I - Preparazione @@ -28,7 +31,7 @@ Questa è un'implementazione funzionante dell'exploit del "testo in chiaro noto #### Sezione II - Fredtool -1. Avvia [Fredtool](https://fredtool.bruteforcemovable.com/) sul tuo computer +1. Apri [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) sul tuo computer 1. Seleziona il tuo file `movable.sed` nel campo "Your movable.sed" 1. Seleziona il tuo backup DSiWare (`.bin`) nel campo "Your dsiware.bin" 1. Supera il captcha "I'm not a robot" @@ -38,7 +41,7 @@ Questa è un'implementazione funzionante dell'exploit del "testo in chiaro noto + Questo file contiene 2 file di backup DSiWare, quello originale (non modificato) e uno "hax" (che include l'exploit) 1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) - + Questa cartella `` all'interno della cartella `` avrà un nome di 32 lettere e numeri + + `` è una cartella dal nome lungo 32 caratteri all'interno di `` + Se la cartella `Nintendo DSiWare` non esiste, creala all'interno della cartella `` 1. Copia il file `42383841.bin` dalla cartella `output/hax/` dall'archivio DSiWare appena scaricato (`fredtool_output.zip`) nella cartella `Nintendo DSiWare` 1. Reinserisci la scheda SD nella tua console @@ -87,7 +90,7 @@ Se desideri una guida visiva per questa parte, è disponibile [qui](https://zoog 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copia il file `42383841.bin` dalla cartella `output/clean/` dall'archivio DSiWare appena scaricato (`fredtool_output.zip`) nella cartella `Nintendo 3DS///Nintendo DSiWare/` della tua scheda SD +1. Copia il file `42383841.bin` dalla cartella `output/clean/` dall'archivio DSiWare appena scaricato (`fredtool_output.zip`) nella cartella `Nintendo 3DS///Nintendo DSiWare/` della tua scheda SD + Sostituisci il file `423841.bin` esistente 1. Reinserisci la scheda SD nella tua console 1. Accendi la console diff --git a/_pages/it_IT/installing-boot9strap-(frogtool).txt b/_pages/it_IT/installing-boot9strap-(frogtool).txt index bc7a6e9104..147fdd34aa 100644 --- a/_pages/it_IT/installing-boot9strap-(frogtool).txt +++ b/_pages/it_IT/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installazione di Boot9strap (Frogtool)" {% include toc title="Indice" %} +I metodi basati su Seedminer sono stati sostituiti da procedimenti più semplici e sicuri. Ritorna a [Cominciamo!](get-started) a meno che non ci siano motivi legittimi per cui tu debba seguire questa pagina (come dei tasti dorsali non funzionanti). +{: .notice--warning} + ### Lettura necessaria Ora utilizzeremo l'Homebrew Launcher per avviare l'applicazione Frogtool e iniettare la versione giapponese di "Flipnote Studios", che a sua volta verrà usata per avviare b9sTool e installare boot9strap. @@ -18,14 +21,14 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * L'ultima versione di [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * L'ultima versione di [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sezione I - Preparazione 1. Inserisci la scheda SD nel tuo computer 1. Copia il tuo file `movable.sed` nella directory principale della tua scheda SD 1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD -1. Copia `boot.nds` (B9STool) dall'archivio `.zip` di b9sTool nella directory principale della tua scheda SD +1. Copia `boot.nds` (b9sTool) dall'archivio `.zip` di b9sTool nella directory principale della tua scheda SD 1. Copia il file `Frogtool.3dsx` nella cartella `/3ds/` della tua scheda SD 1. Copia il file `frogcert.bin` nella directory principale della tua scheda SD 1. Reinserisci la scheda SD nella tua console @@ -74,6 +77,26 @@ Se desideri una guida visiva per questa parte, è disponibile [qui](https://zoog 1. Premi (Start) per salvare e riavviare il 3DS + La console dovrebbe avviare il menu HOME dopo un po'. Se ottieni uno schermo nero per più di 5 minuti, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Sezione V - Ripristino della Modalità Download DS + +1. Avvia l'applicazione "Modalità download" (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Attendi finché non vedrai i due pulsanti + + Non premere alcun pulsante +1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina +1. Seleziona "Miscellaneous options" +1. Seleziona "Switch the hb. title to the current app." +1. Premi (B) per continuare +1. Premi (B) per tornare al menu principale di Rosalina +1. Premi (B) per uscire dal menu di Rosalina +1. Premi il pulsante HOME, quindi chiudi l'applicazione "Modalità download" +1. Riavvia l'applicazione "Modalità download" +1. La console dovrebbe ora avviare l'Homebrew Launcher +1. Avvia Frogtool dalla lista degli homebrew disponibili +1. Seleziona l'opzione "RESTORE patched DS Download Play" +1. Al termine dell'operazione, leggi lo schermo e controlla l'effettivo successo dell'operazione + + Se dovesse essersi verificato qualche errore, o se mancano dei file, correggi il problema e riprova +1. Se il processo è andato a buon fine, tocca il touch screen, quindi premi START per uscire + ___ ### Prosegui con il [Completamento dell'installazione](finalizing-setup) diff --git a/_pages/it_IT/installing-boot9strap-(hardmod).txt b/_pages/it_IT/installing-boot9strap-(hardmod).txt index dd07a43347..e1c3f55902 100644 --- a/_pages/it_IT/installing-boot9strap-(hardmod).txt +++ b/_pages/it_IT/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ Questo processo funziona su New 3DS, New 2DS, Old 3DS e Old 2DS su *tutte* le ve * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* * L'ultima versione di [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Gli utenti Windows possono usare il file `.exe` precompilato, mentre gli utenti Mac e Linux dovranno installare [Python 3](https://www.python.org/downloads/) per avviare il file `.py` -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * Il file `.firm` per la tua console e per la tua versione di sistema: | Versione(i) | Kernel | Old 3DS o Old 2DS | New 3DS o New 2DS | diff --git a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt index c70f6c85ef..5180468abf 100644 --- a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installazione di boot9strap (HBL-USM)" --- -{% include toc title="Indice" %} - -### Lettura necessaria - -Per sfruttare il firmware SAFE_MODE del nostro sistema, dobbiamo iniettare un profilo di connessione WiFi modificato. - -Poiché abbiamo già accesso agli Homebrew, possiamo approfittare di slotTool. - -Questo specifico metodo è destinato all'utilizzo con l'accesso all'Homebrew Launcher tramite [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -Se hai accesso all'Homebrew Launcher tramite un altro metodo, dovresti usare [Frogtool](installing-boot9strap-(frogtool)). - -Una volta inserito il profilo WiFi utilizzeremo SAFE_MODE, una funzionalità di ripristino presente su ogni console 3DS, per attivare il profilo WiFi modificato. - -Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo. - -Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tradizionale](legacy-methods). In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp). -{: .notice--danger} - -### Cosa serve - -* L'archivio dell'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* L'archivio dell'ultima versione di [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Sezione I - Preparazione - -1. Dalla sezione precedente della guida, la console dovrebbe essere già accesa e visualizzare la schermata dell'Homebrew Launcher -1. Avvia slotTool dalla lista degli homebrew disponibili - + Se rimani bloccato su una schermata rossa, spegni forzatamente la console tenendo premuto il pulsante di accensione per quindici secondi, quindi ritenta questa sezione -1. Seleziona l'opzione "INSTALL exploit to wifi slots 1,2,3 & shutdown" - + Apparirà del testo su schermo dopodiché la console si spegnerà -1. Rimuovi la scheda SD dalla console e connettila al computer -1. Copia il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD, sovrascrivendo i file già esistenti -1. Copia il file `usm.bin` dall'archivio `.zip` di unSAFE_MODE nella directory principale della tua scheda SD -1. Reinserisci la scheda SD nella tua console - -#### Sezione II - unSAFE_MODE - -1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché accendi la console - + Mantieni premuti i pulsanti finché la console non si avvia in Safe Mode -1. Premi "OK" per accettare l'aggiornamento - + Non c'è alcun aggiornamento. Fa parte del procedimento -1. Premi "Accetto" per accettare i termini e le condizioni -1. L'aggiornamento fallirà, con codice di errore `003-1099`. Questo risultato è corretto -1. Alla richiesta "Vuoi configurare le Impostazioni internet?", seleziona "Sì" -1. Nel menu successivo, entra in `Connessione 1` -> `Modifica` -> pagina successiva (la freccia a destra) -> `Impostazioni proxy` -> `Impostazioni avanzate` - + Ecco una [rappresentazione visiva](https://uwuu.ca/images/safemode_highlighted.png) -1. Quando vedi la scritta `B9S install SUCCESS` sullo schermo superiore, premi qualunque tasto per avviare la configurazione di Luma - -#### Sezione III - Configurare Luma3DS - -1. La tua console dovrebbe mostrare autonomamente il menu di configurazione di Luma -1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: - + **"Show NAND or user string in System Settings"** -1. Premi (Start) per salvare e riavviare il 3DS - + La console dovrebbe avviare il menu HOME dopo un po'. Se ottieni uno schermo nero per più di 5 minuti, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Sezione IV - Ripristino dei Profili di Connessione WiFi - -1. Avvia l'applicazione "Modalità download" -1. Attendi finché non vedrai i due pulsanti - + Non premere alcun pulsante -1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina -1. Seleziona "Miscellaneous options" -1. Seleziona "Switch the hb. title to the current app." -1. Premi (B) per continuare -1. Premi (B) per tornare al menu principale di Rosalina -1. Premi (B) per uscire dal menu di Rosalina -1. Premi il pulsante HOME, quindi chiudi l'applicazione "Modalità download" -1. Riavvia l'applicazione "Modalità download" -1. La console dovrebbe ora avviare l'Homebrew Launcher -1. Avvia slotTool dalla lista degli homebrew disponibili -1. Seleziona "RESTORE original wifi slots 1,2,3" -1. La console verrà riavviata - -___ - -### Prosegui con il [Completamento dell'installazione](finalizing-setup) -{: .notice--primary} +Questa pagina è stata rimossa perché il metodo utilizzato è obsoleto. Utilizza un metodo più recente indicato alla pagina [Cominciamo!](get-started). +{: .notice--warning} diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt index a1ca91d1e2..1789b194e1 100644 --- a/_pages/it_IT/installing-boot9strap-(ntrboot).txt +++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt @@ -13,8 +13,8 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest * Un magnete che ponga la console in modalità riposo (in caso sia del tipo a chiusura) * La flashcart con installato ntrboot * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Istruzioni @@ -23,15 +23,15 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest 1. Spegni il tuo 3DS 1. Inserisci la scheda SD della console nel tuo computer + Questa è la scheda SD del tuo 3DS, *non* la scheda SD della tua flashcart -1. Copia il file `SafeB9SInstaller.firm` nella directory principale della tua scheda SD e rinominalo in `boot.firm` -1. Copia il file `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD -1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD -1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD +1. Copia il file `SafeB9SInstaller.firm` nella directory principale della scheda SD della tua console e rinominalo in `boot.firm` +1. Copia il file `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della scheda SD della tua console +1. Crea una cartella chiamata `boot9strap` nella directory principale della scheda SD della tua console +1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della scheda SD della tua console ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinserisci la scheda SD nella tua console +1. Reinserisci la scheda SD nel tuo 3DS 1. Accendi la console #### Sezione II - ntrboot diff --git a/_pages/it_IT/installing-boot9strap-(pichaxx).txt b/_pages/it_IT/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..eb8ce3a47b --- /dev/null +++ b/_pages/it_IT/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installazione di boot9strap (PicHaxx)" +--- + +{% include toc title="Indice" %} + +I metodi basati su Seedminer sono stati sostituiti da procedimenti più semplici e sicuri. Ritorna a [Cominciamo!](get-started) a meno che non ci siano motivi legittimi per cui tu debba seguire questa pagina (come dei tasti dorsali non funzionanti). +{: .notice--warning} + +### Lettura necessaria + +Questo metodo usa Seedminer per servirsi ulteriormente del tuo file `movable.sed` e scrivere un file di salvataggio personalizzato per Pokémon Picross, che può essere utilizzato con universal-otherapp per avviare SafeB9SInstaller. + +### Cosa serve + +* Il gioco "Pokémon Picross" (gratuito sull'eShop) +* Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer) +* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* L'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Istruzioni + +#### Sezione I - Preparazione + +1. Spegni il tuo 3DS +1. Inserisci la scheda SD nel tuo computer +1. Copia il file `otherapp.bin` nella directory principale della tua scheda SD +1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD +1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD +1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD +1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD + +#### Sezione II - PicHaxx + +1. Apri [il sito di PicHaxx Injector](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) sul tuo computer +1. Seleziona il tuo file `movable.sed` +1. Seleziona "Build and Download" +1. Attendi il termine del processo +1. Nella tua scheda SD, entra nella cartella `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` + + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) + + `` è una cartella dal nome lungo 32 caratteri all'interno di `` +1. Copia il file `00000001.sav` appena scaricato nella cartella `data` della tua scheda SD + + Sovrascrivi il salvataggio precedente quando richiesto +1. Reinserisci la scheda SD nella tua console +1. Accendi la console +1. Avvia "Pokémon Picross" +1. Se l'exploit è andato a buon fine, la tua console avvierà SafeB9SInstaller + +#### Sezione III - Installazione di boot9strap + +1. Attendi il termine di tutti i controlli di sicurezza +1. Quando richiesto, inserisci la combinazione di tasti richiesta a schermo per installare boot9strap +1. Una volta completato il processo, premi (A) per riavviare la tua console + +#### Sezione IV - Configurare Luma3DS + +1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS + + Se ottieni uno schermo nero, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + + **"Show NAND or user string in System Settings"** +1. Premi (Start) per salvare e riavviare il 3DS + + Se ottieni un errore, continua comunque alla pagina successiva + +___ + +### Prosegui con il [Completamento dell'installazione](finalizing-setup) +{: .notice--primary} diff --git a/_pages/it_IT/installing-boot9strap-(safecerthax).txt b/_pages/it_IT/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..fa9f753924 --- /dev/null +++ b/_pages/it_IT/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installazione di boot9strap (safecerthax)" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +safecerthax è compatibile con tutte le console Old 3DS e Old 2DS di tutte le regioni. + +Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, o il tuo ISP ignora i cambiamenti ai DNS, dovrai usare un metodo alternativo, come [Seedminer](seedminer). In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp). +{: .notice--warning} + +Questo exploit non funzionerà su New 3DS, New 3DS XL, o New 2DS XL. Assicurati che la console che stai modificando sia un Old 3DS, Old 3DS XL, o un Old 2DS prima di continuare. +{: .notice--info} + +### Cosa serve + +* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Istruzioni + +#### Sezione I - Preparazione +1. Spegni il tuo 3DS +1. Inserisci la scheda SD nel tuo computer +1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD +1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD +1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `boot9strap` della tua scheda SD +1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD +1. Reinserisci la scheda SD nella tua console +1. Accendi la console + +#### Sezione II - safecerthax DNS +1. Avvia l'applicazione Impostazioni della console +1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento` +1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `DNS` +1. Imposta "Ottieni automaticamente DNS" su "No", quindi clicca su `Impostazioni avanzate` +1. Imposta sia il DNS primario sia il DNS secondario a `054.038.133.070` +1. Fai clic su OK, quindi su Salva +1. Quando richiesto, clicca su "Test" per eseguire il test di connessione + + Il test dovrebbe avere buon fine +1. Spegni il tuo 3DS + +#### Sezione III - safecerthax +1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché accendi la console + + Mantieni premuti i pulsanti finché la console non si avvia in Safe Mode +1. Premi "OK" per accettare l'aggiornamento + + Non c'è alcun aggiornamento. Fa parte del procedimento +1. Premi "Accetto" per accettare i termini e le condizioni + + L'aggiornamento dovrebbe fallire e dovrebbe apparire un messaggio di errore + + Se l'aggiornamento non fallisce, è possibile che il tuo ISP stia ignorando le modifiche ai DNS. Prova a utilizzare un'altra connessione internet, o segui un metodo alternativo, come [Seedminer](seedminer). +1. Premi "OK" per chiudere il messaggio di errore +1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller + + Se la console si blocca o crasha, forza lo spegnimento della console, quindi ritenta questa sezione + +#### Sezione IV - Installazione di boot9strap + +1. Attendi il termine di tutti i controlli di sicurezza +1. Quando richiesto, inserisci la combinazione di tasti richiesta a schermo per installare boot9strap +1. Una volta completato il processo, premi (A) per riavviare la tua console + +#### Sezione V - Configurare Luma3DS + +1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS + + Se ottieni uno schermo nero, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + + **"Show NAND or user string in System Settings"** +1. Premi (Start) per salvare e riavviare il 3DS + +#### Sezione VI - Ripristino del DNS +1. Avvia l'applicazione Impostazioni della console +1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento` +1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `DNS` +1. Imposta "Ottieni automaticamente DNS" su "Sì" +1. Fai clic su OK, quindi su Salva +1. Quando richiesto, clicca su "Test" per eseguire il test di connessione + + Il test dovrebbe avere buon fine +1. Spegni il tuo 3DS + +___ + +### Prosegui con il [Completamento dell'installazione](finalizing-setup) +{: .notice--primary} diff --git a/_pages/it_IT/installing-boot9strap-(soundhax).txt b/_pages/it_IT/installing-boot9strap-(soundhax).txt index 6961eccf39..6686fe12ef 100644 --- a/_pages/it_IT/installing-boot9strap-(soundhax).txt +++ b/_pages/it_IT/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installazione di boot9strap (Soundhax)" ### Lettura necessaria -Soundhax (combinato a pre9otherapp) è compatibile con le versioni del software comprese tra 2.1.0 e 8.1.0 nelle regioni EUR, JPN, KOR e USA. - -{% capture notice-1 %} - -Tieni presente che tramite scheda di gioco vengono aggiornate solamente le applicazioni principali del sistema, come le Impostazioni della console, il menu HOME, ecc. Non vengono invece aggiornate le funzionalità come Sound Nintendo 3DS o le funzionalità che necessitano di Internet, come ad esempio il Trasferimento dati, il Browser Internet, la Piazza Mii StreetPass o l'eShop. - -Ciò significa che se aggiorni con una scheda di gioco da una versione avente una versione di Sound Nintendo 3DS obsoleta *(<2.1.0)* ad una versione con la stessa applicazione aggiornata, Soundhax non funzionerà! Ti occorrerà un metodo alternativo per avviare l'Homebrew Launcher, come [Installazione di boot9strap (Browser)](installing-boot9strap-(browser)) o [Installazione di boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (combinato a universal-otherapp) è compatibile con le versioni del software comprese tra 1.0.0 e 11.3.0 per tutte le regioni. ### Cosa serve * L'ultima versione di [Soundhax](http://soundhax.com) *(adatta alla regione, tipo e versione della console)* + + Se Soundhax appare nel tuo browser come un video non riproducibile, premi Ctrl+S o Cmd+S per salvarlo sul tuo computer * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* L'ultima versione di [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* L'ultima versione di [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(il file `.bin` corrispondente alla tua versione del software)* +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* L'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Istruzioni @@ -33,12 +24,11 @@ Ciò significa che se aggiorni con una scheda di gioco da una versione avente un 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer 1. Copia il file `.m4a`di Soundhax nella directory principale della tua scheda SD -1. Copia il file pre9otherapp payload nella directory principale della tua scheda SD e rinominalo in `otherapp.bin` -1. Copia il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD -1. Copia il file `boot.3dsx` nella directory principale della tua scheda SD +1. Copia il file `otherapp.bin` nella directory principale della tua scheda SD +1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD 1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD 1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD -1. Copia il file `arm9.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD +1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD 1. Reinserisci la scheda SD nella tua console 1. Accendi la console diff --git a/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..5888d22496 --- /dev/null +++ b/_pages/it_IT/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installazione di boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +SSLoth consente agli utenti alla versione di sistema 11.13.0 e precedenti di bypassare il controllo sulla versione del browser, permettendo l'uso di new-browserhax o old-browserhax, che può quindi essere utilizzato in combinazione con universal-otherapp. + +Se hai aggiornato la tua console alla versione corrente utilizzando una cartuccia, il tuo Browser Internet sarà inaccessibile. In tal caso, dovrai aggiornare la tua console all'ultima versione tramite Impostazioni della console, quindi seguire il metodo per la versione più recente. +{: .notice--warning} + +### Cosa serve + +* L'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Sezione I - Preparazione + +1. Spegni il tuo 3DS +1. Inserisci la scheda SD nel tuo computer +1. Copia il file `otherapp.bin` nella directory principale della tua scheda SD e rinominalo in `arm11code.bin` + + Se non vedi l'estensione `.bin`, non aggiungerla alla fine del nome del file +1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD +1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD +1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `boot9strap` della tua scheda SD +1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD +1. Reinserisci la scheda SD nella tua console +1. Accendi la console + +#### Sezione II - SSLoth +1. Avvia l'applicazione Impostazioni della console +1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento` +1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `DNS` +1. Imposta "Ottieni automaticamente DNS" su "No", quindi clicca su `Impostazioni avanzate` +1. Imposta sia il DNS primario sia il DNS secondario a `054.038.133.070` +1. Fai clic su OK, quindi su Salva +1. Quando richiesto, clicca su "Test" per eseguire il test di connessione + + Il test dovrebbe avere buon fine +1. Spegni il tuo 3DS + +#### Sezione III - Avvio di SafeB9SInstaller +1. Accendi la console +1. Nel menu HOME, premi i pulsanti dorsali L e R per avviare la fotocamera + + Se non riesci ad avviare la fotocamera, avvia il Browser Internet e raggiungi manualmente l'URL (`https://zoogie.github.io/web/nbhax/`) +1. Tocca il pulsante Codice QR e scansiona [questo codice QR](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Se ottieni un errore, [segui questa guida per risolvere il problema](troubleshooting#a-browser-based-exploit-is-not-working) + + Se il browser richiede un aggiornamento, è possibile che il tuo ISP stia ignorando i cambiamenti DNS. Prova un'altra connessione internet o aggiorna la console all'ultima versione e segui l'[Installazione di boot9strap (Browser)](installing-boot9strap-(browser)). +1. Se l'exploit è andato a buon fine, si avvierà SafeB9SInstaller + +#### Sezione IV - Installazione di boot9strap + +1. Attendi il termine di tutti i controlli di sicurezza +1. Quando richiesto, inserisci la combinazione di tasti richiesta a schermo per installare boot9strap +1. Una volta completato il processo, premi (A) per riavviare la tua console + +#### Sezione V - Configurare Luma3DS + +1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS + + Se ottieni uno schermo nero, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + + **"Show NAND or user string in System Settings"** +1. Premi (Start) per salvare e riavviare il 3DS + +#### Sezione VI - Ripristino del DNS +1. Avvia l'applicazione Impostazioni della console +1. Entra in `Impostazioni Internet` -> `Impostazioni di collegamento` +1. Clicca sulla tua connessione wifi e naviga su `Modifica` -> `Pagina Successiva (la freccia a destra)` -> `DNS` +1. Imposta "Ottieni automaticamente DNS" su "Sì" +1. Fai clic su OK, quindi su Salva +1. Quando richiesto, clicca su "Test" per eseguire il test di connessione + + Il test dovrebbe avere buon fine +1. Spegni il tuo 3DS + +___ + +### Prosegui con il [Completamento dell'installazione](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/it_IT/installing-boot9strap-(usm).txt b/_pages/it_IT/installing-boot9strap-(usm).txt index 1e26d78c3e..e86d515f40 100644 --- a/_pages/it_IT/installing-boot9strap-(usm).txt +++ b/_pages/it_IT/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installazione di boot9strap (USM)" {% include toc title="Indice" %} +I metodi basati su Seedminer sono stati sostituiti da procedimenti più semplici e sicuri. Ritorna a [Cominciamo!](get-started) a meno che non ci siano motivi legittimi per cui tu debba seguire questa pagina. +{: .notice--warning} + ### Lettura necessaria Per sfruttare il firmware SAFE_MODE del nostro sistema, dobbiamo iniettare un profilo di connessione WiFi modificato. @@ -16,31 +19,32 @@ Una volta inserito il profilo WiFi utilizzeremo SAFE_MODE, una funzionalità di Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo. -Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tradizionale](legacy-methods). In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp). -{: .notice--danger} +Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Obsoleto](legacy-methods). In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp). +{: .notice--warning} ### Cosa serve * Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer) -* L'archivio dell'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sezione I - Preparazione -1. Avvia [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) sul tuo computer - + Se questo sito non è raggiungibile, prova a usare [quest'altro](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. Se la tua console è accesa, spegnila +1. Avvia [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) sul tuo computer 1. Carica il tuo file movable.sed scegliendo l'opzione "Choose File" 1. Clicca su "Download unSAFE_MODE-bb3 archive" + Verrà scaricato un exploit DSiWare chiamato `F00D43D5.bin` e l'exploit di SAFE_MODE `usm.bin` all'interno di un archivio zip (`unSAFE_MODE-bb3.zip`) -1. Se la tua console è accesa, spegnila 1. Inserisci la scheda SD nel tuo computer 1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD -1. Copia il file `usm.bin` dall'archivio USM (`unSAFE_MODE-bb3.zip`) nella directory principale della tua scheda SD -1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` + + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno +1. Copia il file `usm.bin` da `unSAFE_MODE-bb3.zip` nella directory principale della tua scheda SD +1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) - + Se la cartella `Nintendo DSiWare` non esiste, creala + + `` è una cartella dal nome lungo 32 caratteri all'interno di `` + + Se la cartella `Nintendo DSiWare` non esiste, creala all'interno della cartella `` 1. Se ci sono file di backup DSiWare esistenti (``) nella cartella, spostali sul tuo PC + Così facendo la cartella Nintendo DSiWare verrà svuotata. Spostare i file sul tuo PC servirà a prevenire l'eliminazione accidentale dei backup -1. Copia il file `F00D43D5.bin` dall'archivio USM (`unSAFE_MODE-bb3.zip`) nella cartella `Nintendo DSiWare` +1. Copia il file `F00D43D5.bin` da `unSAFE_MODE-bb3.zip` nella cartella `Nintendo DSiWare` #### Sezione II - BannerBomb3 @@ -56,13 +60,14 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tra #### Sezione III - unSAFE_MODE 1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché accendi la console - + Rilascia i pulsanti dopo pochi secondi. La console si avvierà in Modalità Provvisoria + + Mantieni premuti i pulsanti finché la console non si avvia in Safe Mode 1. Premi "OK" per accettare l'aggiornamento + Non c'è alcun aggiornamento. Fa parte del procedimento 1. Premi "Accetto" per accettare i termini e le condizioni 1. L'aggiornamento fallirà, con codice di errore `003-1099`. Questo risultato è corretto 1. Alla richiesta "Vuoi configurare le Impostazioni internet?", seleziona "Sì" 1. Nel menu successivo, entra in `Connessione 1` -> `Modifica` -> pagina successiva (la freccia a destra) -> `Impostazioni proxy` -> `Impostazioni avanzate` + + Ecco una [rappresentazione visiva](https://uwuu.ca/images/safemode_highlighted.png) 1. Quando vedi la scritta `B9S install SUCCESS` sullo schermo superiore, premi qualunque tasto per avviare la configurazione di Luma #### Sezione IV - Configurare Luma3DS @@ -79,12 +84,10 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tra 1. Entra in `Gestione dati` -> `DSiWare` 1. Clicca sulla sezione Scheda SD + Lo schermo inferiore dovrebbe colorarsi di verde per pochi istanti, dopodiché la console si riavvierà nel menu HOME. Questo vuol dire che i profili di connessione WiFi sono stati ripristinati con successo -1. Spegni la tua console +1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` - + Questo `` sarà lo stesso che hai utilizzato in [Seedminer](seedminer) +1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` 1. Elimina il file `F0D43D5.bin` dalla cartella Nintendo DSiWare -1. Prosegui con il Completamento dell'Installazione ___ diff --git a/_pages/it_IT/legacy-methods.txt b/_pages/it_IT/legacy-methods.txt index 2f4257dbbd..f9df01d7a5 100644 --- a/_pages/it_IT/legacy-methods.txt +++ b/_pages/it_IT/legacy-methods.txt @@ -1,5 +1,5 @@ --- -title: "Metodi Tradizionali" +title: "Metodi Obsoleti" --- {% include toc title="Indice" %} @@ -8,9 +8,9 @@ title: "Metodi Tradizionali" Nell'ultimo periodo ci sono stati numerosi miglioramenti e avanzamenti ai metodi di installazione di CFW. -Per questo motivo, è consigliato usare il metodo più recente descritto nella sezione [Cominciamo!](get-started). +Per questo motivo, si consiglia di seguire l'[Installazione di boot9strap (USM)](installing-boot9strap-(usm)) quando possibile. -Ciononostante, i metodi "tradizionali", più vecchi, vengono mantenuti qui per vari motivi. Ti servirà comunque aver eseguito precedentemente [Seedminer](seedminer). +Ciononostante, i metodi "obsoleti", più vecchi, vengono mantenuti qui per vari motivi. Ti servirà comunque aver eseguito precedentemente [Seedminer](seedminer). Se ti dovesse servire una mano, puoi entrare nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) e chiedere, in inglese. @@ -18,7 +18,7 @@ Se ti dovesse servire una mano, puoi entrare nel canale [Nintendo Homebrew su Di I seguenti exploit fanno uso di una delle due applicazioni DS integrate nel 3DS: Connessioni Nintendo DS e Modalità download DS. -Se sia Connessioni Nintendo DS che Modalità download DS non funzionano, dovrai ripararli con [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) usando un entrypoint per gli homebrew, come Pichaxx. +Se sia Connessioni Nintendo DS che Modalità download DS non funzionano, dovrai ripararli con [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) usando un entrypoint per gli homebrew, come PicHaxx. #### Test Connessioni Nintendo DS (usato per Fredtool) @@ -38,9 +38,7 @@ Se sia Connessioni Nintendo DS che Modalità download DS non funzionano, dovrai ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + Questo metodo richiede che i pulsanti dorsali funzionino 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + Questo è il metodo consigliato se i tuoi pulsanti dorsali non funzionano -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + Questo è il metodo consigliato se il tuo menu Gestione Nintendo DSiWare non funziona \ No newline at end of file diff --git a/_pages/it_IT/ntrboot.txt b/_pages/it_IT/ntrboot.txt index 3d085f63ce..814790cd24 100644 --- a/_pages/it_IT/ntrboot.txt +++ b/_pages/it_IT/ntrboot.txt @@ -17,24 +17,23 @@ Tieni presente che alcune cartucce hanno una "bomba a tempo" che impedirà loro | Nome della Flashcart | Prezzo Attuale | "Bomba ad orologeria"? | Versioni 3DS? | Versioni DSi? | Note aggiuntive | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | €15.99 | 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato**; è possibile riflasharla per ripristinarla a flashcart NDS. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | €19.99 | No | <= 11.13.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** ([Presenta un interruttore per alternare le modalità ntrboot e NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); da non flashare manualmente con ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | €15.99 | 3 Settembre 2024 | <= 11.14.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato**; è possibile riflasharla per ripristinarla a flashcart NDS. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | €19.99 | No | <= 11.14.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** ([Presenta un interruttore per alternare le modalità ntrboot e NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); da non flashare manualmente con ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | €20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | €9.99 | No | Nessuna | Nessuna | Solo i modelli con [determinati flash chip](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) sono compatibili con ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | €19.99 | No | <= 11.13.0 | <= 1.4.5 | Tutte le versioni di RTS sono compatibili. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | €13.99 | 1.87: - 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | €9.99 | 3.9b: 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. I modelli del 2013 non sono compatibili. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | €13.99 | 3.9b: 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. I modelli del 2013 non sono compatibili. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** (presenta un interruttore per alternare le modalità ntrboot ("3DS") e NDS); da non flashare manualmente con ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | €19.99 | No | <= 11.14.0 | <= 1.4.5 | Tutte le versioni di RTS sono compatibili. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | €13.99 | 1.85b: 3 Settembre 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | €9.99 | 4.0b: 3 Settembre 2024 | <= 11.14.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. I modelli del 2013 non sono compatibili. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | €13.99 | 4.0b: 3 Settembre 2024 | <= 11.14.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. I modelli del 2013 non sono compatibili. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** (presenta un interruttore per alternare le modalità ntrboot ("3DS") e NDS); da non flashare manualmente con ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | Nessuna | Nessuna | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Sconosciuto | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Sconosciuto | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: 3 Settembre 2024 | <= 11.14.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/it_IT/region-changing.txt b/_pages/it_IT/region-changing.txt index 25987a8632..cb5d9661ee 100644 --- a/_pages/it_IT/region-changing.txt +++ b/_pages/it_IT/region-changing.txt @@ -17,7 +17,7 @@ Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella carte Questo processo scollegherà il NNID dalla console, in quanto non potrà essere più compatibile. I NNID sono legati alla regione della console con cui vengono creati e non possono essere trasferiti ad un'altra senza un [procedimento avanzato e molto complesso](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -Dopo questo procedimento, solo i **New 3DS che non hanno mai acceduto all'eShop** e **qualsiasi Old 3DS** potranno accedere all'eShop dopo aver creato un nuovo NNID legato alla nuova regione. I New 3DS con regione modificata che hanno già avuto accesso all'eShop con la regione originale non potranno creare un nuovo NNID per accedere all'eShop con la nuova regione! +Dopo questo processo, **non potrai accedere all'eShop**. Questo include qualunque funzione che utilizzi un NNID, come gli aggiornamenti di gioco, l'acquisto di DLC, o funzionalità online in alcuni giochi. Ripristinare la regione a quella originale di solito non correggerà questi problemi. {: .notice--warning} Tieni presente che occasionalmente l'eShop potrebbe non funzionare senza alcun motivo apparente. Questo dipende totalmente dai server Nintendo, e non si può fare assolutamente nulla al riguardo. In maniera molto simile, l'eShop potrebbe invece funzionare su console per cui non dovrebbe (come su alcuni New 3DS). Le cause sono correntemente sconosciute. @@ -55,12 +55,34 @@ DEVI aver già installato Luma3DS e boot9strap per poter proseguire. 1. Copia il file `FBI.3dsx` nella cartella `/3ds/` nella tua scheda SD 1. Reinserisci la scheda SD nel Nintendo 3DS -#### Sezione II - CTRTransfer - +#### Sezione II - Backup della NAND 1. Avvia GodMode9 tenendo premuto (Start) durante l'accensione della console 1. Se ti viene richiesto di creare un backup dei file essenziali, premi (A) per accettare, e al termine di nuovo (A) per proseguire 1. Se ti viene chiesto di reimpostare la data e l'ora dell'RTC, premi (A) per farlo, poi imposta la data e l'ora, infine premi (A) per continuare + Tieni presente che in tal caso dovrai anche reimpostare data ed ora anche nelle Impostazioni della Console al termine della guida +1. Premi il pulsante HOME per far apparire il menu delle azioni +1. Seleziona "Scripts..." +1. Seleziona "GM9Megascript" +1. Seleziona "Backup Options" +1. Seleziona "SysNAND Backup" +1. Premi (A) per confermare + + Questo processo durerà un po' + + Se si verifica un errore, assicurati di avere nella scheda SD almeno 1.3GB liberi +1. Premi il pulsante (A) per continuare +1. Premi (B) per ritornare al menu principale +1. Seleziona "Exit" +1. Se richiesto, premi (A) per ritirare le autorizzazioni di scrittura +1. Tenendo premuto (R), premi (B) per rimuovere la scheda SD +1. Inserisci la scheda SD nel tuo computer +1. Copia il file `__sysnand_###.bin` e `essential.exefs` dalla cartella `/gm9/out/` della tua scheda SD in una posizione sicura sul tuo computer + + Crea dei backup in più posti (come ad esempio un servizio di storage dei file online) + + Questi backup ti salveranno da un brick e/o ti aiuteranno a recuperare i file dalla NAND nel caso dovesse accadere qualcosa in futuro +1. Dopo la copia, elimina i file `__sysnand_###.bin` e `__sysnand_###.bin.sha` dalla cartella `/gm9/out/` della tua scheda SD +1. Reinserisci la scheda SD nella tua console + + Se la tua scheda SD non dovesse essere rilevata, premi contemporaneamente (R) e (B) per rimontarla + +#### Sezione III - CTRTransfer + 1. Entra nella cartella `[0:] SDCARD` -> `gm9` 1. Premi (A) sul file `.bin` del CTRTransfer per selezionarlo 1. Seleziona "CTRNAND options..." @@ -87,7 +109,7 @@ DEVI aver già installato Luma3DS e boot9strap per poter proseguire. + Gli aggiornamenti effettuati usando B9S + Luma (ora installato) sono sicuri + Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente -#### Sezione III - Avviare FBI +#### Sezione IV - Avviare FBI 1. Avvia l'applicazione "Modalità download" (questa [icona]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina @@ -100,7 +122,7 @@ DEVI aver già installato Luma3DS e boot9strap per poter proseguire. 1. Avvia l'applicazione "Modalità download" 1. La console dovrebbe ora avviare l'Homebrew Launcher -#### Sezione IV - Ripristino dei Ticket +#### Sezione V - Ripristino dei Ticket Se lo script non ha trovato alcun ticket dell'utente, salta questa sezione {: .notice--info} @@ -120,14 +142,14 @@ Se lo script non ha trovato alcun ticket dell'utente, salta questa sezione + Premi il pulsante (B) per rifiutare l'installazione di ticket dal CDN. 1. Premi il pulsante HOME per uscire da FBI -#### Sezione V - Cambio dell'area di residenza +#### Section VI - Area di residenza 1. Avvia le Impostazioni della console 1. Vai su "Impostazioni generali", poi "Profilo", quindi "Area di residenza" 1. Seleziona un paese relativo alla regione verso cui hai appena effettuato il cambio 1. Se richiesto, non è necessario selezionare uno stato -#### Sezione VI - Rimozione del file immagine del CTRTransfer +#### Sezione VII - Rimozione del file immagine del CTRTransfer 1. Avvia GodMode9 tenendo premuto (Start) durante l'accensione della console 1. Entra nella cartella `[0:] SDCARD` -> `gm9` diff --git a/_pages/it_IT/restoring-cfw.txt b/_pages/it_IT/restoring-cfw.txt new file mode 100644 index 0000000000..0526fce84c --- /dev/null +++ b/_pages/it_IT/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Ripristinare il CFW" +--- + +{% include toc title="Indice" %} + +### Lettura necessaria + +Questa pagina prepara una console con un'installazione moderna preesistente di boot9strap alla reinstallazione delle applicazioni del custom firmware. Può anche essere utilizzata in caso di perdita o corruzione della scheda SD. + +### Cosa serve +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Istruzioni + +#### Sezione I - Preparazione + +1. Inserisci la scheda SD nel tuo computer +1. Copia i file `boot.3dsx` e `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD + + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno +1. Reinserisci la scheda SD nella tua console + +#### Sezione II - Configurare Luma3DS + +1. Avvia la tua console + * Adesso dovresti visualizzare la schermata di configurazione di Luma3DS +1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + * **"Show NAND or user string in System Settings"** +1. Premi (Start) per salvare e riavviare il 3DS + +___ + +### Prosegui con il [Completamento dell'Installazione](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/it_IT/seedminer.txt b/_pages/it_IT/seedminer.txt index 484ae9c3f7..5677f23f8a 100644 --- a/_pages/it_IT/seedminer.txt +++ b/_pages/it_IT/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Indice" %} +I metodi basati su Seedminer sono stati sostituiti da procedimenti più semplici e sicuri. Ritorna a [Cominciamo!](get-started) a meno che non ci siano motivi legittimi per cui tu debba seguire questa pagina (come dei tasti dorsali non funzionanti). +{: .notice--warning} + ### Lettura necessaria -Per installare boot9strap sulla tua console, dovremo approfittare di un errore nelle restrizioni di sicurezza relative alle applicazioni "DSiWare". +Per installare boot9strap nella tua console, ne ricaviamo la sua chiave di crittografia univoca. Utilizzeremo perciò un'applicazione chiamata Seedminer per calcolare la chiave di criptazione (`movable.sed`) dei DSiWare della tua console. Useremo quindi questa chiave per decriptare un'applicazione DSiWare compatibile, per poi iniettarci un exploit che eseguirà il nostro codice (il tipo di exploit dipenderà dalla regione della tua console). @@ -16,21 +19,7 @@ Questo metodo utilizza una scheda grafica di fascia alta per eseguire i calcoli ### Istruzioni -#### Sezione I - Test di Compatibilità - -Anche se questo test non è strettamente necessario per l'esecuzione dell'exploit Seedminer, gli exploit successivi lo richiederanno e sarebbe uno spreco di tempo eseguire il primo senza poter poi eseguire i secondi. - -Ci sono diversi metodi basati sull'exploit Seedminer, quindi anche se questo test dovesse fallire puoi sempre utilizzare un altro metodo. - -#### Test Gestione Nintendo DSiWare (usato per unSAFE_MODE) - -1. Vai nelle Impostazioni della console, poi su "Gestione Dati", infine su "DSIWare" -1. Se la tua console non si blocca, il test è riuscito - + Se la console ritorna al menu HOME, il test è fallito e dovrai usare uno dei metodi tradizionali indicati in fondo a questa pagina - + Se vedi una schermata colorata prima che la console ritorni al menu HOME, entra nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) (in Inglese) per richiedere assistenza -1. Torna al menu HOME - -#### Sezione II - Preparazione +#### Sezione I - Preparazione 1. Inserisci la scheda SD nel tuo computer 1. Entra nella cartella `Nintendo 3DS` della tua scheda SD @@ -52,43 +41,43 @@ Ci sono diversi metodi basati sull'exploit Seedminer, quindi anche se questo tes + Se riscontri un errore e vieni rimandato al menu principale, o devi creare un nuovo Mii o la console non può connettersi ai server Nintendo (a causa di un ban o per problemi di connettività) 1. Sul tuo profilo Mii cerca il "Codice Amico" sullo schermo superiore -#### Sezione III - Seedminer +#### Sezione II - Seedminer 1. Avvia [Bruteforce Movable](https://seedminer.hacks.guide/) sul tuo computer + Questo sito permette il recupero automatico del file `movable_part1.sed` (utilizzando una console 3DS fittizia) e la decriptazione della chiave DSiWare della tua console (utilizzando Seedminer tramite il computer di un volontario) - + Se questo sito non è raggiungibile, prova a usare [quest'altro](https://bfm.nintendohomebrew.com/) - + Se entrambi i siti non sono raggiungibili, entra nel [canale Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) e chiedi supporto (in Inglese) + + Se il sito non funziona, entra nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) (in Inglese) per richiedere assistenza 1. Inserisci il Codice Amico della tua console (senza spazi o trattini) nel campo "Your friend code" 1. Incolla i 32 caratteri della cartella nel campo "Your ID0" + Non inserire l'ID0 a mano. Assicurati che l'ID0 sia stato inserito correttamente copiandolo e incollandolo da dove l'hai salvato nella sezione precedente 1. Seleziona "Go" - + Se il sito passa direttamente al punto 4, scarica il tuo file `movable.sed` e prosegui con la sezione successiva. + + Se il sito passa direttamente al punto 4, scarica il tuo file `movable.sed` e prosegui con la sezione successiva 1. Quando richiesto, usa il pulsante "Registra Amico" sulla tua console per aggiungere il codice amico della console 3DS fittizia 1. Attendi l'aggiornamento del sito + Se la pagina non si aggiorna da sola, attendi qualche minuto prima di ricaricarla manualmente una singola volta 1. Quando il sito avrà finito di elaborare le informazioni, potrai continuare premendo "Continue" o effettuare le operazioni su un altra console con "Do another device". Premi il pulsante verde "Continue" 1. Attendi il termine del processo - + Potrebbe terminare in poco tempo (anche meno di cinque minuti) o impiegarci anche mezz'ora. - + Durante questo processo, il bot potrebbe non visualizzarsi sul tuo 3DS. Fintantoché il sito si aggiorna, non sarà un problema. + + Potrebbe terminare in poco tempo (anche meno di cinque minuti) o impiegarci anche mezz'ora + + Durante questo processo, il bot potrebbe non visualizzarsi sul tuo 3DS. Fintantoché il sito si aggiorna, non sarà un problema + Se dopo mezz'ora non è successo, nulla, entra nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) (in Inglese) per richiedere assistenza 1. Al termine del processo, scarica il tuo file `movable.sed` dal sito + Conserva questo file in quanto ti servirà nelle pagine successive ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Consigliato) -Seedminer utilizza il tuo file `movable.sed` per sfruttare gli exploit presenti nel firmware SAFE_MODE presente in ogni console 3DS. +Questo metodo usa Seedminer per servirsi ulteriormente del tuo file `movable.sed` e scrivere un file di salvataggio personalizzato per Pokémon Picross, che può essere utilizzato in congiunzione a universal-otherapp per installare un custom firmware. -Questo metodo è compatibile con tutte le regioni, anche se la regione CHN non è coperta da questa guida. +È quindi richiesta l'applicazione Pokémon Picross (gratuita sull'eShop), per cui è necessario l'accesso all'eShop e un 3DS di regionalità USA, EUR, o JPN. -Prosegui con l'[Installazione di boot9strap (USM)](installing-boot9strap-(usm)) +Prosegui con l'[Installazione di boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Metodi Tradizionali +Seedminer utilizza il tuo file `movable.sed` per creare un backup DSiWare modificato che inganna la console ad eseguire il dump dei DSiWare di sistema. -Questi metodi sono obsoleti e non sono consigliati a meno che non ti venga indicato altrimenti. +Questo metodo è consigliato solo se per qualche motivo non sei in grado di seguire la procedura di PicHaxx + universal-otherapp. -[Metodi Tradizionali](legacy-methods) +Prosegui con [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt index 6cecfcda4a..e9236191e7 100644 --- a/_pages/it_IT/site-navigation.txt +++ b/_pages/it_IT/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Più popolari** + [Completamento dell'installazione](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installazione di boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installazione di boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installazione di boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installazione di boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Aggiornamento con scheda di gioco](cart-update) + [Riconoscimenti](credits) ++ [Verifica del CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donazioni](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flash di ntrboot (Con più 3DS)](flashing-ntrboot-(3ds-multi-system)) + [Flash di ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flash di ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formattazione SD (Linux)](formatting-sd-(linux)) ++ [Formattazione SD (Mac)](formatting-sd-(mac)) ++ [Formattazione SD (Windows)](formatting-sd-(windows)) + [Cominciamo!](get-started) ++ [Cominciamo! (New 3DS)](get-started-(new-3ds)) ++ [Cominciamo! (Old 3DS)](get-started-(old-3ds)) + [Usare GodMode9](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Pagina iniziale](/) + [Homebrew Launcher (Alternative)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installazione di boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installazione di boot9strap (Browser)](installing-boot9strap-(browser)) + [Installazione di boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installazione di boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installazione di boot9strap (MSET)](installing-boot9strap-(mset)) + [Installazione di boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installazione di boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installazione di boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installazione di boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installazione di boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installazione di boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installazione di boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installazione di boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installazione di boot9strap (USM)](installing-boot9strap-(usm)) + [Spostare l'EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Cambiare regione](region-changing) ++ [Ripristinare il CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Metodi Seedminer Tradizionali](legacy-methods) + [Risoluzione dei problemi](troubleshooting) + [Disinstallare il CFW](uninstall-cfw) + [Aggiornare B9S](updating-a9lh) diff --git a/_pages/it_IT/updating-b9s.txt b/_pages/it_IT/updating-b9s.txt index d8e05a28ac..f562db0741 100644 --- a/_pages/it_IT/updating-b9s.txt +++ b/_pages/it_IT/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Aggiornare B9S" Questa pagina spiega come aggiornare la propria installazione di boot9strap all'ultima versione. -{% capture notice-1 %} -È stata segnalata recentemente un'ondata di ban da parte di Nintendo riscontrata da utenti con CFW. Per proteggerti, per favore esegui i seguenti passaggi prima di iniziare questa guida: - -1. Entra nelle Impostazioni della Console, quindi in "Impostazioni Internet", poi "SpotPass" ed infine "Invio informazioni della console" -1. Disabilita l'impostazione "Invio informazioni della console" -1. Esci dalle Impostazioni della Console -1. Accedi alla lista di amici (l'[icona con un viso arancione]({{ "/images/friend-list-icon.png" | absolute_url }}) nella riga superiore del menu HOME) - + Se riscontri un errore e vieni rimandato al menu principale, o le impostazioni della lista di amici sono già state disattivate o la console non può connettersi ai server Nintendo (a causa di un ban o per problemi di connettività) -1. Vai nelle impostazioni della lista di amici, quindi "Imposta notifiche amici" ed infine "Vuoi mostrare il software in uso?" -1. Disabilita l'impostazione "Vuoi mostrare il software in uso?" -1. Esci dalla lista di amici - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Nonostante riteniamo che l'uso di un custom firmware sia sicuro anche online, ci sono stati ban dal network online in passato, soprattutto per l'uso di cheat e comportamenti sospetti con l'eShop. +{: .notice--warning} ### Cosa serve * L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `devkit`, né il file `ntr`)* -* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* L'ultima versione di [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)* +* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Istruzioni @@ -39,7 +25,6 @@ Se durante questa sezione ti verrà chiesto di sovrascrivere dei file sulla tua {: .notice--info} 1. Inserisci la scheda SD nel tuo computer -1. Copia il file `boot.3dsx` nella directory principale della tua scheda SD 1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD 1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD 1. Copia il file `SafeB9SInstaller.firm` dall'archivio `.zip` di SafeB9SInstaller nella cartella `/luma/payloads/` della tua scheda SD @@ -58,7 +43,7 @@ Se durante questa sezione ti verrà chiesto di sovrascrivere dei file sulla tua 1. Spegni il tuo 3DS 1. Inserisci la scheda SD nel tuo computer -1. Copia il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD, sovrascrivendo il file già preesistente +1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD, sostituendo il file esistente 1. Reinserisci la scheda SD nella tua console 1. Accendi la console diff --git a/_pages/ja_JP/404.txt b/_pages/ja_JP/404.txt index 68206d809e..ec7ee1e1f5 100644 --- a/_pages/ja_JP/404.txt +++ b/_pages/ja_JP/404.txt @@ -1,9 +1,9 @@ --- -title: "Page Not Found" # +title: "ページが見つかりません" # layout: single-no-ads excerpt: "ページが見つかりません。 " # sitemap: false --- -Sorry, but the page you were trying to view does not exist. +申し訳ありませんが、表示しようとしたページは存在しません。 {: .notice--info} diff --git a/_pages/ja_JP/a9lh-to-b9s.txt b/_pages/ja_JP/a9lh-to-b9s.txt index 665e850e9f..331aefb3a3 100644 --- a/_pages/ja_JP/a9lh-to-b9s.txt +++ b/_pages/ja_JP/a9lh-to-b9s.txt @@ -1,94 +1,76 @@ --- -title: "A9LH to B9S" +title: "A9LHからB9Sへの更新" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必ずお読みください -This page is for existing arm9loaderhax users to update their devices to boot9strap. +このページでは既存のA9LHをboot9strapに更新する方法が書かれています。 -All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation. +今後、すべてのLuma3DSのリリースは`.firm`のフォーマットでのみ配信されます。このフォーマットはboot9strapとsighaxだけがサポートしています。 もし、今後もリリースを受け取りたいなら、このページのガイドを使ってアップデートしてください。 -To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). +このページの [マグネット](https://wikipedia.org/wiki/Magnet_URI_scheme) リンクを使用するには、[Deluge](http://dev.deluge-torrent.org/wiki/Download)のようなTorrentクライアントが必要です。 -To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). +このページにリンクされた `.7z`ファイルを展開するには、[7-Zip](http://www.7-zip.org/) もしくは、 [The Unarchiver](https://theunarchiver.com/) のような解凍ソフトが必要です。 -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +私たちは、カスタムファームウェアはオンラインで使用しても安全であると信じていますが、 過去には、主に不正行為や疑わしいeShopの行動のために、オンラインネットワークが禁止された事例もあります。 {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: +### 必要なもの -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- -### What You Need - -Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. +必須ファイルである`secret_sector.bin`は、様々なバージョンの`data_input.zip`にあるので注意してください。 既にそのファイルを持っているのであれば、下記のものをダウンロードするのではなく、そのファイルを使うこともできます。 {: .notice--info} -Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console. If you do not have a New 3DS, you do not need `secret_sector.bin`. +なお、New 3DSのarm9loaderhaxを消去するには`secret_sector.bin`は必須です。boot9strapのインストールには使用しません。 また、New 3DSでなければ`secret_sector.bin`は必要ありません。 {: .notice--info} -* - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* - **New 3DS ユーザーのみ:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) +* バージョンがv7.0.5の [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(拡張子が".7z"のファイル) +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -For all steps in this section, overwrite any existing files on your SD card. +このセクションのすべての手順で、SDカード上の既存のファイルは上書きします。 {: .notice--info} -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card -1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card -1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. **New 3DS Users Only:** Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card +1. "boot.firm"と"boot.3dsx"を最新のLuma3ds".zip"からSDカードのルートへコピーします +1. V7.0.5 Luma3DS `.7z`から`arm9loaderhax.bin`をSDカードのルートにコピーします +1. SDカード上の `/luma/payloads/` フォルダ内の既存の `.bin`ペイロードは、boot9strap互換のLuma3DSのバージョンと互換性がないので削除してください +1. SafeB9SInstaller `.zip`から`SafeB9SInstaller.bin`をSDカードの`/luma/payloads/` フォルダーへコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。 +1. **New 3DS ユーザーのみ:** `secret_sector.bin` をSDカード上のboot9strapフォルダにコピーします。 ![]({{ "/images/screenshots/a9lh-to-b9s-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. 再度、SDカードを本体に挿入してください。 -#### Section II - Installing boot9strap +#### セクション II - boot9strapをインストールする -1. Boot your device while holding (Start) to launch SafeB9SInstaller - + If you see the luma configuration screen instead of SafeB9SInstaller, simply press (Start), then shutdown your 3DS and try again - + If this gives you an error, try either using a new SD card, or formatting your current SD card (backup existing files first) -1. Wait for all safety checks to complete - + If you get an "OTP Crypto Fail" error, download - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce), then put it in the `/boot9strap/` folder on your SD card and try again -1. When prompted, input the key combo given to install boot9strap -1. Once it has completed, press (A) to reboot your device. - + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. (Start) を押しながら起動させ、SafeB9SInstallerを起動させます。 + + SafeB9SInstallerではなくLuma3DSの設定画面が表示された場合は、(Start) を押しながら再起動してください。 + + これでエラーが発生した場合は、新しいSDカードを使用するか、現在のSDカードをフォーマットしてください(既存のファイルを先にバックアップしてください) +1. すべてのセーフティチェックが完了するまで待ちます + +「OTP Crypto Fail」エラーが発生した場合は、こちらをダウンロードしてください - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)、 SDカードの `/boot9strap/` フォルダに入れてもう一度やり直してください +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します。 + + デバイスが起動時にシャットダウンした場合は、Luma3DS `.zip` から `boot.firm` をSDカードのルートにコピーしたことを確認してください -#### Section III - Configuring Luma3DS +#### セクション III - Luma3DSを設定する -1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following: +1. Luma3DSの設定メニューで、(A) ボタンと十字ボタンを使用して以下をオンにします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/bannerbomb3.txt b/_pages/ja_JP/bannerbomb3.txt index 0356bb145c..a9ba9eb713 100644 --- a/_pages/ja_JP/bannerbomb3.txt +++ b/_pages/ja_JP/bannerbomb3.txt @@ -2,46 +2,49 @@ title: "BannerBomb3" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +Seedminerベースのメソッドは、より簡単で安全なメソッドに置き換えられました。 このページの手順に従う理由がない場合は、[始める](get-started) に戻ってください(例えば、L/Rボタンが壊れているなど)。 +{: .notice--warning} -To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. +### 必ずお読みください -To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to dump the DSi Internet Settings application to the SD root. +DSiWareシステムをダンプするために、本体設定アプリのDSiWare データ管理画面の脆弱性を使用します。 -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. +それを実現するため、システムの暗号化キー (movable.sed) を使用して、DSソフト用設定に脆弱性を仕込み、DSiWareのバックアップのダンプをSDカードのルートに作成します。 -### What You Need +これらのガイドは、システムバージョン末尾にある「U、E、J、K」にあるように、米国、欧州、日本、韓国の端末で機能します。 -* Your `movable.sed` file from completing [Seedminer](seedminer) +### 必要なもの -#### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer -1. Upload your movable.sed using the "Choose File" option -1. Click "Go" - + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) -1. If your console is powered on, power off your console +* [Seedminer](seedminer) より作成した、 `movable.sed` ファイル + +#### セクション I - BannerBomb3 +1. [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) をあなたのコンピューターで開いてください。 +1. "ファイルを選択"から movable.sed ファイルをアップロードします。 +1. "Go" をクリックします。 + + 脆弱性を含んだDSiWareである `F00D43D5.bin` が入ったZIPファイルをダウンロードします。 (`tadmuffin_out.zip`) +1. コンソールの電源が入っている場合は、コンソールの電源を切ります 1. パソコンにSDカードを入れます -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it -1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC - + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you dont delete any intentional backups -1. Copy the `F00D43D5.bin` file from the `output\Usa_Europe_Japan_Korea\` folder of the downloaded BannerBomb3 archive (`tadmuffin_out.zip`) to the `Nintendo DSiWare` folder -1. Reinsert your SD card into your device -1. Power on your device -1. Launch System Settings on your device -1. Navigate to `Data Management` -> `DSiWare` -1. Click on the SD Card section - + Your system should flash Magenta (pink/purple) and then crash a few seconds later. This means it worked -1. Power off your device +1. SDカードから、 `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` の順にフォルダを開きます。 + + ここでいう `` は先ほどあなたが [Seedminer](seedminer) で使用したものと同じです。 + + もし `Nintendo DSiWare` フォルダが見当たらない場合は作成してください。 +1. もし、フォルダ内にDSiWareのバックアップファイル(`<8文字のID>.bin`)がいくつかある場合、PCへ移してください。 + + これで Nintendo DSiWare フォルダが空になります。 PCに移すことで、バックアップファイルが削除されることはなくなります。 +1. BannerBomb3からダウンロードした圧縮ファイル (`tadmuffin_out.zip`) 内の、 `output\Usa_Europe_Japan_Korea\` フォルダにある `F00D43D5.bin` ファイルをSDカードの `Nintendo DSiWare` フォルダにコピーします。 +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます +1. デバイスの「本体設定」を開きます。 +1. `データ管理` -> `DSiWare データ管理` に移動します +1. SDカードをクリックします。 + + システムはマゼンダ（ピンク／パープル）色で点滅してから数秒でクラッシュするはずです。 それは成功したことを意味します。 +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. You should now have `42383841.bin` in SD root. This is the DSiWare backup you will use later in the guide -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) -1. Delete `F00D43D5.bin` from the Nintendo DSiWare folder and from your computer. This file will not be needed anymore +1. SDカードのルートに `42383841.bin` が存在しているはずです。 このファイルは、DSiWareのバックアップとして、このあとのガイドで使用します。 +1. SDカードから、 `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` の順にフォルダを開きます。 + + ここでいう `` は先ほどあなたが [Seedminer](seedminer) で使用したものと同じです。 +1. パソコンとDSiWareフォルダから、 `F00D43D5.bin` を削除します。 このファイルはもう必要ありません。 -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) +引き続き [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) へ進んでください。 {: .notice--primary} diff --git a/_pages/ja_JP/cart-update.txt b/_pages/ja_JP/cart-update.txt index 494de6b7f7..ce7aaac941 100644 --- a/_pages/ja_JP/cart-update.txt +++ b/_pages/ja_JP/cart-update.txt @@ -1,36 +1,36 @@ --- -title: "Cartridge Update" +title: "カートリッジからアップデート" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必ずお読みください -All game cartridges contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection). +すべてのゲームカードには、要求バージョンよりも3DSのバージョンが低い場合のために、ファームウェアイメージが入っています。(インターネット接続は不要です。) {% capture notice-1 %} -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. +ゲームカード経由のアップデートでは、システム設定、ホーム メニューなどのコア機能のみが更新されますのでご注意ください。 ゲームカード経由の更新ではシステムを転送、インターネット ブラウザー、Mii 広場 e ショップなどのネットワーク機能部分とニンテンドー3DSサウンドの更新は提供されません。 -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break [Soundhax](homebrew-launcher-(soundhax))! その場合、[その他の方法](homebrew-launcher-(alternatives))でHomebrew Launcherを実行しなければなりません！ +したがって、古いニンテンドーDSサウンドを実装するバージョン*（3.0.0以前のバージョン）*をより高いバージョンのニンテンドー3DSサウンドを実装するバージョンまで更新すると、[Soundhax](homebrew-launcher-(soundhax)) を実行できません！ その場合、[その他の方法](homebrew-launcher-(alternatives))でHomebrew Launcherを実行しなければなりません！ -This also means that a cartridge update will NOT install a browser if you do not already have one. これは実際のシステムバージョン**のみ**が更新されます。*（たとえば 6.0.0-0-> 2.1.0-0）* 最後の番号*（-0）*は変更**されません**。 +そのため、ブラウザをまだインストールしていない場合は、カードで更新してもブラウザをインストールしません。 これは実際のシステムバージョン**のみ**が更新されます。*（たとえば 6.0.0-0-> 2.1.0-0）* 最後の番号*（-0）*は変更**されません**。 {% endcapture %}
{{ notice-1 | markdownify }}
-**Updating with a game cartridge containing the version 9.9.0 or above will remove your browser until a standard online update is performed!** +* * バージョン 9.9.0 以上のゲームのカードで更新すると、オンライン アップ デートが実行されるまで、ブラウザーが削除されます! * * {: .notice--danger} -### What You Need +### 必要なもの -* A game cartridge that [contains the version](http://www.3dsdb.com/) you wish to update to +[更新したいバージョン](http://www.3dsdb.com/)が含まれているゲームカード -### Instructions +### 手順 -1. Boot your device into recovery mode by holding (L) + (R) + (A) + (UP) while powering on -1. If prompted, decline the update -1. Reboot your device -1. Put the game in your device if it is not already +1. デバイス を(L) + (R) + (A) + (上) を押しながら起動し、リカバリモードを立ち上げます。 +1. メッセージが表示されたら、更新プログラムを拒否します。 +1. デバイスを再起動します。 +1. 入れていない場合、お使いのデバイスにゲームを入れてください。 1. ゲームを起動します 1. 指示通り更新します diff --git a/_pages/ja_JP/checking-for-cfw.txt b/_pages/ja_JP/checking-for-cfw.txt new file mode 100644 index 0000000000..2f39a22291 --- /dev/null +++ b/_pages/ja_JP/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="目次" %} + +### 必読事項 + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### 手順 + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/ja_JP/credits.txt b/_pages/ja_JP/credits.txt index b945960304..51770515d3 100644 --- a/_pages/ja_JP/credits.txt +++ b/_pages/ja_JP/credits.txt @@ -1,11 +1,14 @@ --- -title: "Credits" +title: "謝辞" --- +**ガイドの作成者であり維持者であるPlailetに特別感謝します！** +{: .notice--primary} + **[Freenode上の #Cakey](http://webchat.freenode.net/?channels=%23Cakey) に感謝を！** {: .notice--primary} -**Special thanks to all of [the translators](https://crowdin.com/project/3ds-guide) for being awesome!** +**[翻訳者全員](https://crowdin.com/project/3ds-guide)に特別な感謝を ！** {: .notice--primary} このページで私があなたを忘れている場合、私に連絡してください。あなたの名前を追加します。 @@ -22,7 +25,7 @@ title: "Credits" + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ title: "Credits" + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ title: "Credits" + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/ja_JP/ctrtransfer.txt b/_pages/ja_JP/ctrtransfer.txt index 3f9f348a4f..d9e925d438 100644 --- a/_pages/ja_JP/ctrtransfer.txt +++ b/_pages/ja_JP/ctrtransfer.txt @@ -2,122 +2,125 @@ title: "CTRTransfer" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必ずお読みください -This is add-on section for installing an 11.5.0 CTRTransfer image to your device. +このページは、お使いの本体に 11.5.0 CTRTransfer をインストールする方法を解説する補足ページです。 -To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). +このページの [マグネット](https://wikipedia.org/wiki/Magnet_URI_scheme) リンクを使用するには、[Deluge](http://dev.deluge-torrent.org/wiki/Download)のようなTorrentクライアントが必要です。 -Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. +SDカードの/luma/payloadsフォルダに +godmode9.firm以外のペイロードがある場合、 +起動時に (start) を長押しするとchainloaderメニューが表示されます。 +十字キーでgodmode9を選択して　(A) ボタンを押してください。 -You MUST have already installed Luma3DS and boot9strap to use this. +これを使用するには、Luma3DSとboot9strapをインストールしている必要があります。 {: .notice--danger} -### What You Need +### 必要なもの -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)* -* The 11.5.0 CTRTransfer image for your device and region +* v1.9.2pre1バージョンのの[GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* 最新版の [FBI](https://github.com/Steveice10/FBI/releases/latest) *(”.3dsx”のファイル)* +* お使いの機種とリージョンに対応した11.5.0 CTRTransferイメージ *(機種とリージョンの両方が一致したものが下記にない場合、いずれかのリージョンから機種が一致しているものを一つ選択してください)*： - + - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS or 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS または 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS または 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS または 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS または 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) ~ - + - [Old 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [Old 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [Old 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS または 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS または 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS または 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device -1. パソコンにSDカードを入れます -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Create a folder named `cias` on the root of your SD card if it does not already exist -1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card -1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card -1. Copy the 11.5.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/gm9/` folder on your SD card -1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device +1. 本体の電源を切ります。 +1. SDカードをPCに挿入します。 +1. SDカードの直下に`3ds`フォルダがない場合、そのフォルダを作成します +1. SDカード直下に `cias` フォルダが存在しない場合、作成します。 +1. `GodMode9.firm` を GodMode9の `.zip` から取り出し、SDカードの `/luma/payloads/` フォルダにコピーします。 +1. `gm9`フォルダをGodMode9の `.zip`から取り出し、SDカードの直下にコピーします。 +1. 11.5.0 CTRTransferイメージの `.bin` を CTRTransferの `.zip` から取り出し、SDカードの `/gm9/` フォルダにコピーします +1. `FBI.3dsx`を、SDカードの`/3ds/`フォルダにコピーします。 +1. 再度、SDカードを本体に挿入してください。 -#### Section II - CTRTransfer +#### セクション II - CTRTransfer -1. Launch GodMode9 by holding (Start) during boot -1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed -1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue - + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide -1. Navigate to `[0:] SDCARD` -> `gm9` -1. Press (A) on the CTRTransfer `.bin` to select it -1. Select "CTRNAND options..." -1. Select "Transfer image to CTRNAND" -1. If prompted, select "Transfer to SysNAND" - + This prompt will only appear if you have an EmuNAND -1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given - + This process will take some time -1. Once the transfer has completed, press (A) to continue -1. Press (B) to decline relocking write permissions if prompted -1. Press (B) twice to return to the main menu -1. Press (Home) to bring up the action menu -1. Select "Scripts..." -1. Select "GM9Megascript" -1. Select "Scripts from Plailect's Guide" -1. Select "CTRTransfer Ticket Copy" -1. When prompted, press (A) to proceed +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. 重要なファイルのバックアップを作成するように求められたら、(A) ボタンを押して実行し、(A) ボタン を押して完了させてください。 +1. RTC日付/時刻を修正するには、(A) ボタンを押し、日付や時刻を設定してください。終わったら、(A) を押して続けてください。 + +補足 RTCの日付と時刻を修正する必要がある場合は、このガイドの後にシステム設定で時刻を同じように修正する必要があります +1. `[0:] SDCARD` -> `gm9`へ移動します。 +1. CTRTransfer `.bin` を選択して、 (A) ボタンを押します +1. "CTRNAND options..." を選択、決定します +1. "Transfer image to CTRNAND" を選択、決定します +1. メッセージが表示されたら、 "Transfer to SysNAND" を選択、決定します + + お使いのSDカードにEmuNANDが存在する場合のみ表示されます。 EmuNANDからのデータ移行を行う場合、上記の操作を行ってください。 +1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl1) への書き込みを許可します + + この作業には少し時間がかかります +1. 作業が完了したら、(A) ボタンを押して続行します +1. NANDへの書き込みのロックを求められた場合、(B) ボタンを押して拒否してください。 +1. (B) ボタンを2回押してメインメニューに戻ります +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します +1. "Scripts from Plailect's Guide"を選択します +1. "CTRTransfer Ticket Copy"を選択します +1. メッセージが表示されたら、(A) ボタンを押して続行します 1. (A) で続行します -1. Press (B) to return to the main menu -1. Select "Exit" -1. Press (A) to relock write permissions if prompted -1. Press (Start) to reboot your device -1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" - + Updates while using B9S + Luma (what you have) are safe +1. (B) を押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます +1. (Start) ボタンを押して本体を再起動します +1. 「本体設定」→「その他の設定」を開き、最後のページから「本体の更新」を行います + + (現在あなたが使用している) B9S + Luma を使用している状態での本体更新は安全です + エラーが発生すれば、DNS設定を「自動」に変更してください -#### Section III - Launching FBI +#### セクション III - FBI を起動 -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Launch the Download Play application -1. Your device should load the Homebrew Launcher +1. ダウンロードプレイアプリケーションを開きます (この [アイコン]({{ "/images/download-play-icon.png" | absolute_url }}) +1. L+↓+SelectでRosalinaメニューを開きます。 +1. "Miscellaneous options​"を選びます。 +1. "Switch the hb. title to the current app."を選びます。 +1. (B) ボタンで続行します +1. (B) を押してRosalinaメインメニューに戻ります +1. (B) を押してRosalinaメインメニューを終了します。 +1. Homeボタンを押しダウンロードプレイを閉じます。 +1. 再度ダウンロードプレイアプリを開きます。 +1. デバイスでHomebrew Launcherが起動されます -#### Section IV - Reinstalling Tickets +#### セクション IV - チケットの再インストール -If script found no user tickets told you to skip this section, then skip this section +スクリプトがユーザーを検出しなかった場合このセクションをスキップしてください。 {: .notice--info} -1. Launch FBI from the list of homebrew -1. Navigate to `SD` -> `cias` -1. Return to the SD directory with (B) -1. Select "gm9" -1. Select "out" -1. Select "ctrtransfer_tickets" -1. Do the following process for either the `eshop` folder, `unknown` folder, or both - + Navigate to the folder - + Select "\" - + Select "Install and delete all tickets" - + Wait. フリーズすることがありますが、焦らないようにしてください。 - + Press (A) to confirm - + Press (B) to decline installing tickets from CDN. -1. Press (Home) to exit FBI +1. HomebrewメニューからFBIを起動します。 +1. SDカードのciasフォルダに移動します +1. (B) を押して、SDディレクトリに戻ります +1. "gm9out" を選択します +1. 「out」を選択します +1. 「Ctrtransfer_tickets」を選択します +1. 次の操作を `eshop` フォルダと `unknown` フォルダのいずれか、または両方に対して行います + + フォルダに移動します + + "\" を選択します + + "Install and delete all tickets" を選択します + + しばらく待ちます。 フリーズすることがありますが、焦らないようにしてください。 + (A) で確定します + + (B) ボタンを押し、CDNから tickets をインストールしないようにします +1. (Home) ボタンを押してFBIを終了します -#### Section V - Remove CTRTransfer image +#### セクション V - CTRTransferイメージの削除 -1. Launch GodMode9 by holding (Start) during boot -1. Navigate to `[0:] SDCARD` -> `gm9` -1. Press (X) on the CTRTransfer image `.bin` to delete it +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. `[0:] SDCARD` -> `gm9`へ移動します。 +1. 拡張子.binのCTR Transferイメージの上でXキーを押して削除します。 1. (A) を押して確認します -1. Press (Start) to reboot your device +1. (Start) ボタンを押して本体を再起動します ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/donations.txt b/_pages/ja_JP/donations.txt index 7f5e56f592..703370a198 100644 --- a/_pages/ja_JP/donations.txt +++ b/_pages/ja_JP/donations.txt @@ -1,5 +1,5 @@ --- -title: "Donations" # +title: "寄付" # layout: single-no-ads --- diff --git a/_pages/ja_JP/dsidumper.txt b/_pages/ja_JP/dsidumper.txt index bf917006b4..cf411ed670 100644 --- a/_pages/ja_JP/dsidumper.txt +++ b/_pages/ja_JP/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. パソコンにSDカードを入れます -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +使用されているメソッドが古いため、このページは削除されました。 [始める](get-started) ページにリンクされた最新の情報を使用してください。 +{: .notice--warning} diff --git a/_pages/ja_JP/f3-(linux).txt b/_pages/ja_JP/f3-(linux).txt index 667fdbce90..6fda727500 100644 --- a/_pages/ja_JP/f3-(linux).txt +++ b/_pages/ja_JP/f3-(linux).txt @@ -1,22 +1,22 @@ --- -title: "F3 (Linux)" +title: "F3（Linux）" # --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -This is an add-on section for checking your SD card for errors using F3. +このアドオンセクションは、F3を使用してSDカードのエラーをチェックするための手順です。 SDカードのサイズとコンピュータのパフォーマンスによって、かかる時間は異なり、数時間もかかる場合があります！ このページはLinuxユーザー向けです。 Linuxを使用しないユーザーは、[H2testw (windows)](h2testw-(windows))か[F3X (mac)](f3x-(mac))をご覧ください。 -### What You Need +### 必要なもの -* The latest version of [F3](https://github.com/AltraMayor/f3/releases/latest) +* 最新版の[F3](https://github.com/AltraMayor/f3/releases/latest) -### Instructions +### 手順 1. F3 `.zip`ファイルをを解凍します 1. `cd`でf3ディレクトリまで移動します @@ -56,11 +56,11 @@ Average Reading speed: 9.42 MB/s ___ -If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on your SD card +処理結果が「Data LOST: 0.00 Byte (0 sectors)」であれば、SDカードは正常です。SDカード上の.h2wファイルを全て削除することができます。 {: .notice--success} 結果はそうでなければ、SDカードは壊れた恐れがありますので、新しいSDカードに切り替えることをご検討ください！ {: .notice--danger} -### Return to [Get Started](get-started) +### [はじめに](get-started) に戻る {: .notice--primary} diff --git a/_pages/ja_JP/f3x-(mac).txt b/_pages/ja_JP/f3x-(mac).txt index 1b485ccec1..8b76978d91 100644 --- a/_pages/ja_JP/f3x-(mac).txt +++ b/_pages/ja_JP/f3x-(mac).txt @@ -2,21 +2,21 @@ title: "F3X (Mac)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -This is an add-on section for checking your SD card for errors using F3X. +このアドオンセクションは、F3Xを使用してSDカードのエラーをチェックするための手順です。 SDカードのサイズとコンピュータのパフォーマンスによって、かかる時間は異なり、数時間もかかる場合があります！ このページはMacユーザー向けです。 Macを使用しないユーザーは、[H2testw (windows)](h2testw-(windows))または[F3 (Linux)](f3-(linux))をご覧ください。 -### What You Need +### 必要なもの -* The latest release of [F3X](https://github.com/insidegui/F3X/releases/latest) +* 最新バージョンの[F3X](https://github.com/insidegui/F3X/releases/latest/) -### Instructions +### 手順 1. F3X `.zip`ファイルをを解凍します 1. パソコンにSDカードを入れます @@ -27,11 +27,11 @@ SDカードのサイズとコンピュータのパフォーマンスによって ___ -結果は「Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on your SD card +結果は「Success! Your card is ok!」と表示されれば、SDカードは正常です。SDカード上の.h2wファイルを全て削除することができます。 {: .notice--success} 結果はそうでなければ、SDカードは壊れた恐れがありますので、新しいSDカードに切り替えることをご検討ください！ {: .notice--danger} -### Return to [Get Started](get-started) +### [はじめに](get-started) に戻る {: .notice--primary} diff --git a/_pages/ja_JP/faq.txt b/_pages/ja_JP/faq.txt index 0b783ab60e..08b2a6ccd1 100644 --- a/_pages/ja_JP/faq.txt +++ b/_pages/ja_JP/faq.txt @@ -1,15 +1,15 @@ --- -title: "FAQ" +title: "よくある質問" --- -**Q:** *I am on the latest system version. Is my device hackable?* -**A:** Yes +**Q:** *私のデバイスは最新バージョンを使用しています。 それでも改造することができますか？* +**A:** はい。 **Q:** *どうやってLuma3DSを更新できますか？* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** [最新のLuma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)から`boot.firm`と`boot.3dsx`ファイルをSDカードのルートにコピーし、既存のファイルを置き換えます。 -**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* -**A:** いいえ。 boot9strap is a superior method of loading hax that runs early in boot. +**Q:** *ハッキングするために有料ツール(Gateway、Sky3DSなど) を使用する必要があると聞いていましたが、 本当ですか？* +**A:** いいえ。 boot9strapはboot時に実行されるhaxをロードする優れた方法です。 **Q:** *どうやって既存のGatewayセットアップからデバイス上にインストールしたゲームにセーブデータを移行しますか？* **A:** [これ](https://gbatemp.net/threads/425743/)をご覧ください @@ -27,12 +27,12 @@ title: "FAQ" **A:** はい。 本当に安全だからもう聞かないでください **Q:** *サポートはどこ？* -**A:** For support (in English), ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp). +** A：**サポート (英語) については、[Discord上のNintendo Homebrew](https://discord.gg/MWxPgEp)を御覧ください。 **Q:** *容量が4GBかもっと小さなSDカードを使用してもいいですか？* **A:** もちろんです！ -**Q:** *Can I use a 128GB (or larger) SD card?* +**Q:** *容量が128 GB(もしくはもっと大容量のSDカード) を使ってもいいですか？* **A:** はい。ですが、一部のユーザーからはこういう容量を使用するとパフォーマンスに影響を及ぼす報告があります。 exFATではなくFAT32でフォーマットしなければならないのでご注意ください。 **Q:** *終わったら、どうやって新しいSDカードに切り替えますか？* @@ -42,7 +42,7 @@ title: "FAQ" **A:** NNIDを所有する状態でガイドで始めて、ガイドの指示通りに実行すると、最後までもNNIDを失いません。 **Q:** *システム転送はどうなりますか？* -**A:** Once you have completed the guide, you can system transfer to and from an B9S 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost). +** A：**あなたがガイドを完了したら、B9S 3DSまたは2DSとの間で、通常のコンソールやEmuNANDと同じようにシステム間の転送を行うことができます(海賊版のゲーム/テーマ/ DLCは失うことになりますが、失われたゲームであっても保存はされます。) **Q:** *パソコンを使わずAndroid携帯みたいなデバイスだけを使って完成できますか ？* **A:** SDカードのファイルを変更できればいいです！ diff --git a/_pages/ja_JP/file-extensions-(windows).txt b/_pages/ja_JP/file-extensions-(windows).txt index 67b918bcd0..62e2b35dcd 100644 --- a/_pages/ja_JP/file-extensions-(windows).txt +++ b/_pages/ja_JP/file-extensions-(windows).txt @@ -1,39 +1,39 @@ --- -title: "File Extensions (Windows)" +title: "ファイル拡張子 (Windows)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必ずお読みください -This is an add-on section for disabling Windows's default behavior of hiding file extensions. +これは、ファイル拡張子を隠すWindowsのデフォルトの動作を無効にするためのアドオンセクションです。 -This will make it easier for you to find the referenced files in the rest of this guide. +これはこのガイドにおいて該当のファイルを探しやすくします。 -### Instructions +### 手順 #### Windows 10 / 8.1 / 8 -1. Launch File Explorer by opening any directory, such as your SD card directory -1. Click the "View" option on the ribbon menu -1. Check the box labeled "File name extensions" +1. エクスプローラでSD カード等の任意のディレクトリを開きます。 +1. リボンメニューの "表示" オプションをクリックします +1. "登録されている拡張子は表示しない"というラベルボックスをチェックします ![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }}) {: .notice--info} #### Windows 7 -1. Open the start menu by clicking on it or using the Windows key -1. Search for "Folder Options" and select the corresponding result +1. Windowsキーをクリックしてスタートメニューを開きます +1. "フォルダオプション" を検索し、対応する結果を選択します ![]({{ "/images/screenshots/windows-7-folder-options-start-menu.png" | absolute_url }}) {: .notice--info} -1. Click the "View" option at the top of the Folder Options menu -1. Uncheck the box labeled "Hide extensions for known file types" +1. フォルダオプションメニューの上部にある "表示" オプションをクリックします +1. "既知のファイルタイプの拡張子を表示しない"チェックボックスをオフにします ![]({{ "/images/screenshots/windows-7-folder-options.png" | absolute_url }}) {: .notice--info} -### Return to [Get Started](get-started) +### [はじめに](get-started) に戻る {: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/finalizing-setup.txt b/_pages/ja_JP/finalizing-setup.txt index 8820c219a4..92bdaec58e 100644 --- a/_pages/ja_JP/finalizing-setup.txt +++ b/_pages/ja_JP/finalizing-setup.txt @@ -1,183 +1,174 @@ --- -title: "Finalizing Setup" +title: "セットアップを完了する" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必ずお読みください -The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. +`boot.firm` のファイルは、NANDのロードが終了した後にboot9strapによって起動されるもので、どんなarm9データもFIRM形式として有効になります このファイルはいつでも変更することができます。 Luma3DSでは、Luma3DSチェーンローダを使用して他のarm9データをFIRM形式で起動することができます。 -本文では、[AuroraWright](https://github.com/AuroraWright/)さんのLuma3DSで直接にパッチしたSysNANDを実行するようにします。これにより、EmuNANDを実行する必要はゼロになったり、ハッキングされた3DSの使用を簡単にしたり、SDカードの空き領域を節約したりできます。 +本文では、[LumaTeam](https://github.com/LumaTeam/)さんのLuma3DSで直接にパッチしたSysNANDを実行するようにします。これにより、EmuNANDを実行する必要がゼロになったり、改造された3DSの使用を簡単にしたり、SDカードの空き領域を節約したりできます。 手順の一部として、下記のプログラムもインストールします： + **FBI** *（CIAフォーマットのゲームとアプリをインストールします）* -+ **Anemone3DS** *(installs custom themes)* -+ **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *（CFWインストールを簡単に更新します）* -+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* -+ **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* -+ **DSP1** *(allows homebrew applications to have sound)* -+ **ctr-no-timeoffset** *(removes the rtc offset so that the home menu and rtc timestamps match)* ++ **Anemone3DS** *(カスタムテーマをインストールできます)* +**Checkpoint** *(3DSおよびDSゲーム用のセーブファイルの保存と復元ができます)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* ++ **Hourglass9** *（NANDやゲームカードに関する機能があります）* ++ **Homebrew Launcher Loader** *(Homebrew Launcherが開けます)* ++ **DSP1** *(homebrewアプリケーションにサウンドを与えます)* ++ **ctr-no-timeoffset** *(ホームメニューとRTCタイムスタンプが一致するようにrtcの差を削除します)* -### What You Need +### 必要なもの -* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* -* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* -* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) -* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* -* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* +* 最新の [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *( `.cia` ファイル)* +* 最新の [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *( `.cia` ファイル)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* +* 最新の[Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) +* v1.9.2pre1 の[GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* 最新版の [DSP1](https://github.com/zoogie/DSP1/releases/latest) *( `.cia` ファイル)* +* 最新の[FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* +* 最新の[ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Create a folder named `cias` on the root of your SD card if it does not already exist -1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card -1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card -1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card -1. Copy `FBI.cia` to the `/cias/` folder on your SD card -1. Copy `DSP1.cia` to the `/cias/` folder on your SD card -1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card -1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card -1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist -1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card -1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card -1. Reinsert your SD card into your device -1. Power on your device +1. SDカードの直下に`3ds`フォルダがない場合、そのフォルダを作成します + + このフォルダは自作ソフトとそのデータを保存します。デバイスが自動的に生成する"Nintendo 3DS"フォルダとは異なります。 +1. SDカード直下に `cias` フォルダが存在しない場合、作成します。 +1. SDカードの`/3ds/`フォルダに `ctr-no-timeoffset.3dsx` をコピーします +1. `FBI.3dsx`を、SDカードの`/3ds/`フォルダにコピーします。 +1. `Homebrew_Launcher.cia`をSDカードの`/cias/`フォルダーへコピーします +1. SD カードの `/cias/` フォルダーに `FBI.cia` をコピーします +1. SD カードの `/cias/` フォルダーに `DSP1.cia` をコピーします +1. SD カードの `/cias/` フォルダーに `Anemone3DS.cia` をコピーします +1. `Checkpoint.cia`をSDカードの`/cias/`フォルダーへコピーします +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card +1. `payloads`というフォルダをSDカードの`luma`フォルダの中に存在しない場合は作成します +1. `GodMode9.firm` を GodMode9の `.zip` から取り出し、SDカードの `/luma/payloads/` フォルダにコピーします。 +1. `gm9`フォルダをGodMode9`.zip`からSDカードのルートにコピーします。 +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます -#### Section II - Updating the System +#### セクション II - システムの更新 -If, while following a previous version of this guide, you CTRTransfered your *New 3DS* to 2.1.0, you should now [restore your NAND backup](godmode9-usage#restoring-a-nand-backup) before doing this section. +以前のガイドで、*New 3DS*を2.1.0にCTRT転送した場合は、このセクションを実行する前に [NANDバックアップを復元する](godmode9-usage#restoring-a-nand-backup) 必要があります。 {: .notice--danger} -If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section. +次の手順に進む前に、EmuNANDを既に導入しており、昔のEmuNANDを新しいSysNAND CFWに移行したい場合は、まず[EmuNANDのデータ移行](move-emunand) をしてください。 {: .notice--info} -1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" - + Updates while using B9S + Luma (what you have) are safe - + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section - + エラーが発生すれば、DNS設定を「自動」に変更してください - + If this still gives you an error, [follow CTRTransfer](ctrtransfer), then try updating again +1. 「本体設定」→「その他の設定」を開き、1番右のページから「本体の更新」を行います + + (今使っている) B9S + Luma を使用している状態での本体更新は安全です + + 更新はせずに、「この本体は最新です。」と表示されます 本体の更新をすでにしている場合、これは当たり前のことです。次のステップの進んで下さい + + エラーが発生した場合は、DNS設定を「自動」に設定してください + +引き続きエラーが発生した場合は、[CTRTransfer(ctrtransfer)] をご覧のあと、もう一度アップデートを試してください -#### Section III - Homebrew Launcher +#### セクション III - Homebrew Launcher -1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) -1. Wait until you see the two buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Launch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch ctr-no-timeoffset from the list of homebrew -1. Press (A) to set the offset to 0 - + This will set the system clock to match the RTC date&time (which we will set soon) -1. Press (Start) to return to the Homebrew Launcher -1. Launch FBI from the list of homebrew +1. ダウンロードプレイを開いて下さい (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. 画面が表示されるまで待ちます +1. (Lボタン) + (十字キー下) + (Select) を同時に押してRosalina menu を開きます +1. "Miscellaneous options​"を選びます。 +1. "Switch the hb. title to the current app."を選びます。 +1. (B) ボタンで続行します +1. (B) を押してRosalinaメインメニューに戻ります +1. (B) を押してRosalinaメインメニューを終了します。 +1. Homeボタンを押しダウンロードプレイを閉じます。 +1. 再度ダウンロードプレイアプリを開きます。 +1. するとHomebrew Launcherが起動されます +1. Ctr-no-timeoffsetをhomebrewリストから開きます +1. (A) を押してオフセットを 0 に設定します + + これは、システムクロックをRTCの日付と時刻に合わせるように設定します (これはすぐに設定されます) +1. (Start) を押し、Homebrew Launcherへ戻ります +1. HomebrewメニューからFBIを起動します。 -#### Section IV - Installing CIAs +#### セクション IV - CIA のインストール -1. Navigate to `SD` -> `cias` +1. SDカードのciasフォルダに移動します 1. 「\」を選択します -1. Select the "Install and delete all CIAs" option, then press (A) to confirm -1. Press (Home), then close Download Play +1. 「Install and delete all CIAs」を選択し、(A) を押して確認します +1. Homeボタンを押しダウンロードプレイを閉じます。 -#### Section V - DSP Dump +#### セクション V - DSP ダンプ -1. Launch the DSP1 application -1. Once it has completed, press (B) to self-delete the app and return to the home menu +1. DSP1 を起動します。 +1. 完了したら、(B) を押すとアプリが自動的に削除され、ホームメニューに戻ります -#### Section VI - CTRNAND Luma3DS +#### セクション VI - CTRNAND Luma3DS -1. Power off your device -1. Launch GodMode9 by holding (Start) during boot -1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed -1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue -1. Press (Home) to bring up the action menu -1. Select "Scripts..." -1. Select "GM9Megascript" -1. Select "Scripts from Plailect's Guide" -1. Select "Setup Luma3DS to CTRNAND" -1. When prompted, press (A) to proceed -1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. 本体の電源を切ります。 +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 +1. 重要なファイルのバックアップを作成するように求められたら、(A) ボタンを押して実行し、(A) ボタン を押して完了させてください。 +1. RTC日付/時刻を修正する場合、(A) ボタンを押し、日付や時刻を設定してください。終わったら、(A) を押してください。 +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します +1. "Scripts from Plailect's Guide"を選択します +1. "Setup Luma3DS to CTRNAND"を選択します +1. メッセージが表示されたら、(A) ボタンを押して続行します +1. (A) を押してSysNAND(lvl1) 書き込みをロック解除し、与えられたキーコンボを入力します 1. (A) で続行します -#### Section VII - Cleanup SD Card +#### セクション VII - SD カードのクリーンアップ -1. Select "Cleanup SD Card" -1. When prompted, press (A) to proceed +1. "Cleanup SD Card"を選択します +1. メッセージが表示されたら、(A) ボタンを押して続行します 1. (A) で続行します -1. Press (B) to return to the main menu +1. Bキーを押してメインメニューに戻ります -#### Section VIII - Backup Essential Files +#### セクション VIII - 重要ファイルのバックアップ -1. Select "Backup Options" -1. Select "SysNAND Backup" +1. "Backup Options"を選択します +1. "SysNAND Backup"を選択します 1. (A) を押して確認します - + This process will take some time - + If you get an error, make sure that you have at least 1.3GB of free space on your SD card + + この作業には少し時間がかかります + + エラーの場合は、SD カードに1.3GB以上の空き領域があることを確認してください。 1. (A) で続行します -1. Press (B) to return to the main menu -1. Select "Exit" -1. Press (A) to relock write permissions if prompted -1. Navigate to `[M:] MEMORY VIRTUAL` -1. Press (A) on `boot9.bin` to select it -1. Select "Copy to 0:/gm9/out" +1. Bキーを押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます +1. `[M:] MemoryVIRTUAL`に移動します +1. `boot9.bin` で (A) を押して選択します +1. "Copy to 0:/gm9/out" を選択します 1. (A) で続行します -1. Press (Home) to bring up the action menu -1. Select "Poweroff system" to power off your device +1. (Home) を押してアクションメニューを表示します +1. "Power off system" で本体の電源を切る 1. パソコンにSDカードを入れます -1. Copy `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, and `boot9.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer - + Make backups in multiple locations (such as online file storage) - + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future -1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it -1. Reinsert your SD card into your device -1. Power on your device +1. `__sysnand_###.bin`, `__sysnand_###.bin.sha`, `essential.exefs`, そして`boot9.bin` をSDカードの`/gm9/out/` フォルダからパソコンの安全な場所にコピーします + + オンラインストレージ等の場所にファイルのバックアップをしてください + + これらのバックアップはブリックした場合に、NANDイメージからファイルを復元することができます。 +1. バックアップしたら、SDカードの`/gm9/out/`フォルダから`__sysnand_###.bin`と`__sysnand_###.bin.sha`を削除します。 +1. 再度、SDカードを本体に挿入してください。 +1. 本体の電源を入れます ___ -#### Information and Notes - -{% capture notice-10 %} -Luma3DS UpdaterでLuma3DSを最新バージョンまで更新できます。そのアプリを起動して (A) を押して更新できます。 - -これは「本体の更新」と違うことで、ただ最新バージョンのLuma3DSファイルをダウンロードして解凍するだけです。 - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
+#### メモ {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +デフォルトでLuma3DSが起動されます。 (Select) を押したまま起動すると、Luma3DS設定メニューを開きます。 -You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected). +起動時に (Start) を押しているとLuma3DSチェーンローダーメニューを起動できます (Luma3DSチェーンローダーメニューは複数のペイロードが検出された場合にのみ表示されます)。 -You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message). +起動時に(Start) + (Select) + (X) を押すと、ARM11ブートロム (`boot11.bin`), ARM9ブートロム (`boot9.bin`), そして本体独自のOTP (`OTP.bin`) がSDカードの `/boot9strap/` フォルダにダンプされます。(この方法は表示されないので覚えておいて下さい) -You can now press (L) + (Down) + (Select) while the system is booted to open the Rosalina menu integrated into Luma3DS. For a full list of Rosalina features, please see the [Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0) +システムが起動している間に (L) + (Down) + (Select) を押すと、Luma3DSに統合されたRosalinaメニューが開きます。 Rosalinaの機能のリストについては、[Luma3DS v8.0 Release](https://github.com/AuroraWright/Luma3DS/releases/tag/v8.0)を確認ください。 {% endcapture %}
{{ notice-6 | markdownify }}
{% capture notice-6 %} -If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. +より大きなサイズのSDカードにアップグレードする場合は、新しいSDカードをFAT32としてフォーマットし、古いSDカードの内容を新しいSDカードにコピーするだけです。 -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +新しいSDカードが32GBを超える場合は、別のツールを使用してフォーマットする必要があります。 例えば、[guiformat (Windows)](formatting-sd-(windows))、[ディスクユーティリティ(Mac)](formatting-sd-(mac))、[cfdisk (Linux)](formatting-sd-(linux))　など。 {% endcapture %}
{{ notice-6 | markdownify }}
@@ -185,14 +176,14 @@ If your new SD card is bigger than 32GB, then you have to use a different tool t デバイスの地域を別の地域に変更したいなら、[地域を変更する](region-changing) ページをご覧ください。 {: .notice--success} -For information on using GodMode9's various features, check out the [GodMode9 Usage](godmode9-usage) page. +GodMode9 のさまざまな機能を使用してについては、 [GodMode9 Usage](godmode9-usage) を参照してください。。 {: .notice--success} Luma3DSの使い方については、[このwiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage)をご覧ください。 {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +カスタムテーマとスプラッシュスクリーンのインストールについては [Theme Plaza](https://themeplaza.art/)をチェックしてください。 {: .notice--success} -For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). +Luma3DSのGatesharkチートコードの使用方法については、 [Checkpoint](https://github.com/FlagBrew/Checkpoint)をご覧ください。 {: .notice--success} diff --git a/_pages/ja_JP/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ja_JP/flashing-ntrboot-(3ds-multi-system).txt index 5fe81d435a..e888e79bae 100644 --- a/_pages/ja_JP/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/ja_JP/flashing-ntrboot-(3ds-multi-system).txt @@ -1,58 +1,58 @@ --- -title: "Flashing ntrboot (3DS Multi System)" +title: "ntrbootのフラッシュ (3DSマルチシステム)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) +この後を読む前に、[ntrboot](ntrboot) の情報を全て読んだことを確認してください。 -This method requires temporary access to a second 3DS family device that is already running boot9strap. This does not require your flashcart to support either 3DS's version. +この方法では、すでにboot9strapを実行している第2の3DSファミリデバイスにアクセスする必要があります。 フラッシュカードが3DSのいずれかのバージョンをサポートする必要はありません。 -Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +稀ですが、フェイクのフラッシュカードを**文鎮化**する可能性があります。 起きることは稀ですが、リストされたフラッシュカードしか対応していません。 偽造されたカードを受け取る可能性を減らすためには、評判のいいサイトを利用することをおすすめします。(例えば[NDS Card](http://www.nds-card.net/)など) {: .notice--danger} -### What You Need +### 必要なもの -* Your ntrboot compatible flashcart -* Two 3DS family devices - + **The source 3DS**: the 3DS family device that is already running boot9strap - + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* -* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) +* ntrbootと互換性のあるフラッシュカード +* 2台の3DSファミリーの本体 + + **ソースとなる3DS**: すでにboot9strapを実行している3DSファミリデバイス + + **ターゲットとなる3DS**: ストックファームウェアのデバイス +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; devkitファイルではない)* +* 最新安定版 [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off **the source 3DS** -1. Insert **the source 3DS**'s SD card into your computer -1. Create a folder named `ntrboot` on the root of your SD card -1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card -1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on **the source 3DS**'s SD card -1. Reinsert **the source 3DS**'s SD card back into **the source 3DS** -1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS** +1. **ソース3DS**の電源を切ります +1. **ソース3DS**のSDカードをパソコンに入れます +1. `ntrboot` というフォルダをSDカードのルートに作成します +1. `boot9strap_ntr.firm` と `boot9strap_ntr.firm.sha` をboot9strap ntr `.zip` から解凍し、SD カードの`/ntrboot/`フォルダにコピーします。 +1. `ntrboot_flasher.firm` を **ソースとなる3DS**のSDカードの `/luma/payloads` フォルダへコピーします +1. **ソースとなる3DS**のSDカードを本体へ挿入します +1. Ntrboot互換のDS / DSiフラッシュカードを **ソースとなる3DS**へ挿入します -#### Section II - Flashing ntrboot +#### セクション II - ntrbootの書き込み -1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS** -1. Select "ntrboot_flasher" -1. Read the red screen warning +1. (Start) を押しながら起動し **ソースとなる3DS**のLuma3DSチェーンローダを起動します。 +1. "ntrboot_flasher" を選択します +1. 赤い画面の警告を読んでください 1. (A) で続行します -1. Select your flashcart - + If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option -1. Select "Dump Flash" +1. フラッシュカードを選択します + + 上部にフラッシュカードが表示されない場合は、各オプションの下部の画面をお読みください +1. "Dump Flash" を選択します 1. 処理が完了するまで待ちます 1. (A) で続行します -1. Press (A) to return to the main menu -1. Select "Inject Ntrboot" -1. Press (A) for retail unit ntrboot +1. (A) を押してメインメニューに戻ります +1. "Inject Ntrboot" を選択します +1. (A) を押します 1. 処理が完了するまで待ちます -1. Press (A) to return to the main menu -1. Press (B) to power off **the source 3DS** +1. (A) を押してメインメニューに戻ります +1. (B) を押し、**ソースとなる3DS**の電源を切ります ___ -### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +### 引き続き [boot9strapをインストール (ntrboot)](installing-boot9strap-(ntrboot)) に進んでください。 {: .notice--primary} diff --git a/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt b/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt index f9e0c52a5d..f4c2886f96 100644 --- a/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt @@ -1,53 +1,53 @@ --- -title: "Flashing ntrboot (3DS Single System)" +title: "ntrbootのフラッシュ (3DSシングルシステム)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) +この後を読む前に、[ntrboot](ntrboot) の情報を全て読んだことを確認してください。 -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information. +この方法は、改造されていない3DSと対応しているフラッシュカード以外の必要の物は必要ありません。 この方法は、フラッシュカードを使い、ntrbootフラッシャーが入っている`.nds`ファイルを実行します。 このことは、`.nds`を3DSで実行するのにフラッシュカードが対応していることが必要です。 [ntrboot](ntrboot) にあるフラッシュカードの対応表を見てください。 -Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +稀ですが、フェイクのフラッシュカードを**文鎮化**する可能性があります。 起きることは稀ですが、リストされたフラッシュカードしか対応していません。 偽造されたカードを受け取る可能性を減らすためには、評判のいいサイトを利用することをおすすめします。(例えば[NDS Card](http://www.nds-card.net/)など) {: .notice--danger} -### What You Need +### 必要なもの -* Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* -* The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) +* ntrbootと互換性のあるフラッシュカード +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; devkitファイルではない)* +* 最新のリリースの [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device -1. Insert your flashcart's SD card into your computer -1. Create a folder named `ntrboot` on the root of your flashcart's SD card -1. Copy `boot9strap_ntr.firm` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your flashcart's SD card -1. Copy `ntrboot_flasher_nds.nds` to your flashcart's SD card -1. Reinsert your flashcart's SD card back into your flashcart -1. Insert your ntrboot compatible DS / DSi flashcart into your device +1. 本体の電源を切ります。 +1. SDカードをPCに挿入します。 +1. `ntrboot` というフォルダをSDカードの直下に作成します +1. `boot9strap_ntr.firm`をboot9strap　ntr `.zip`からフラッシュカードのSDカードの`/ntrboot/`フォルダにコピーします +1. `ntrboot_flasher_nds.nds`をフラッシュカードのSDカードの直下にコピーします +1. SDカードをフラッシュカードに挿入します。 +1. ntrbootと互換性のあるフラッシュカードをデバイスへ入れます。 -#### Section II - Flashing ntrboot +#### セクション II - ntrbootの書き込み -1. Launch `ntrboot_flasher_nds.nds` on your device using your flashcart +1. フラッシュカードを使ってデバイスで `ntrboot_flasher_nds.nds` を起動します +1. (A) ボタンで続行します +1. (Up) と (Down) を使ってフラッシュカードを選択します 1. (A) で続行します -1. Use (Up) and (Down) to select your flashcart +1. フラッシュカードのメモリをバックアップするために「Dump flash」を選択してください +1. キーコンボを入力して確認してください 1. (A) で続行します -1. Select "Dump flash" to make a backup of your flashcart's memory -1. Input the key combo given to confirm +1. (Up) と (Down) を使ってフラッシュカードを選択します 1. (A) で続行します -1. Use (Up) and (Down) to select your flashcart +1. フラッシュカードにboot9strapをインストールするために、"Inject FIRM"を選択してください +1. キーコンボを入力して確認してください 1. (A) で続行します -1. Select "Inject FIRM" to install boot9strap to your flashcart -1. Input the key combo given to confirm -1. (A) で続行します -1. Power off your device +1. 本体の電源を切ります。 ___ -### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +### 引き続き [boot9strapをインストール (ntrboot)](installing-boot9strap-(ntrboot)) に進んでください。 {: .notice--primary} diff --git a/_pages/ja_JP/flashing-ntrboot-(dsi).txt b/_pages/ja_JP/flashing-ntrboot-(dsi).txt index 68419385c1..2228569d1a 100644 --- a/_pages/ja_JP/flashing-ntrboot-(dsi).txt +++ b/_pages/ja_JP/flashing-ntrboot-(dsi).txt @@ -1,48 +1,48 @@ --- -title: "Flashing ntrboot (DSi)" +title: "ntrbootのフラッシュ (DSi)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) +この後を読む前に、[ntrboot](ntrboot) の情報を全て読んだことを確認してください。 -This method requires temporary access to a Nintendo DSi that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your DSi. This means that your flashcart must support launching `.nds` files on your DSi's version. See the flashcart table on [ntrboot](ntrboot) for more information. +この方法では、フラッシュカードと互換性のあるNintendoDSiにアクセスする必要があります。 この方法は、フラッシュカードを使い、ntrbootフラッシャーが入っている`.nds`ファイルをDSiにて実行します。 このことは、`.nds`をDSiで実行するのにフラッシュカードが対応していることが必要です。 [ntrboot](ntrboot) にあるフラッシュカードの対応表を見てください。 -Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +稀ですが、フェイクのフラッシュカードを**文鎮化**する可能性があります。 起きることは稀ですが、リストされたフラッシュカードしか対応していません。 偽造されたカードを受け取る可能性を減らすためには、評判のいいサイトを利用することをおすすめします。(例えば[NDS Card](http://www.nds-card.net/)など) {: .notice--danger} -### What You Need +### 必要なもの -* Your ntrboot compatible flashcart -* Two devices - + **The source DSi**: the Nintendo DSi which is compatible with your flashcart - + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) *(`dsi` flasher; not the standard flasher)* +* ntrbootと互換性のあるフラッシュカード +* 2台の本体 + + **ソースとなるDSi**: フラッシュカードと互換性のあるNintendo DSi + + **ターゲットとなる3DS**: 3DSファミリーのストックファームウェアのデバイス +* 最新の[ds_ntrboot_flasher](https://github.com/ntrteam/ds_ntrboot_flasher/releases/latest) *(`dsi` flasherであって、standard flasherではない。)* -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off **the source DSi** -1. Insert your flashcart's SD card into your computer -1. Copy `ds_ntrboot_flasher_dsi.nds` to your flashcart's SD card -1. Reinsert your flashcart's SD card back into your flashcart -1. Insert your ntrboot compatible DS / DSi flashcart into **the source DSi** +1. **ソースとなるDSi**の電源を切ります +1. SDカードをPCに挿入します。 +1. `ds_ntrboot_flasher_dsi.nds`をフラッシュカードのSDカードへコピーします。 +1. SDカードをフラッシュカードに挿入します。 +1. Ntrboot互換のDS / DSiフラッシュカードを **ソースとなるDSi**へ挿入します -#### Section II - Flashing ntrboot +#### セクション II - ntrbootの書き込み -1. Launch `ds_ntrboot_flasher_dsi.nds` on **the source DSi** using your flashcart +1. `ds_ntrboot_flasher_dsi.nds` を**ソースとなるDSi** でフラッシュカードを使って起動します 1. (A) で続行します -1. Use (Up) and (Down) to select your flashcart +1. (Up) と (Down) を使ってフラッシュカードを選択します 1. (A) で続行します -1. Press (A) to "inject ntrboothax" -1. Press (A) to select "RETAIL" +1. "inject ntrboothax"を (A) で選択します +1. "RETAIL"を (A) で選択します 1. (A) で続行します -1. Select "EXIT" +1. "EXIT"を選択します。 ___ -### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +### 引き続き [boot9strapをインストール (ntrboot)](installing-boot9strap-(ntrboot)) に進んでください。 {: .notice--primary} diff --git a/_pages/ja_JP/flashing-ntrboot-(nds).txt b/_pages/ja_JP/flashing-ntrboot-(nds).txt index d8157d9789..f81ed3e4d4 100644 --- a/_pages/ja_JP/flashing-ntrboot-(nds).txt +++ b/_pages/ja_JP/flashing-ntrboot-(nds).txt @@ -1,57 +1,57 @@ --- -title: "Flashing ntrboot (NDS)" +title: "ntrbootのフラッシュ (NDS)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot) +この後を読む前に、[ntrboot](ntrboot) の情報を全て読んだことを確認してください。 -This method requires temporary access to a Nintendo DS or Nintendo DS Lite that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your NDS. +この方法では、フラッシュカードと互換性のあるNintendoDSもしくはNintendoDS Liteにアクセスする必要があります。 この方法は、フラッシュカードを使い、ntrbootフラッシャーが入っている`.nds`ファイルをNDSにて実行します。 -Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.net/)) +稀ですが、偽物のフラッシュカードを**文鎮化**する可能性があります。 起きることは稀ですが、リストされたフラッシュカードしか対応していません。 偽造されたカードを受け取る可能性を減らすためには、評判のいいサイトを利用することをおすすめします。(例えば[NDS Card](http://www.nds-card.net/)など) {: .notice--danger} -### What You Need +### 必要なもの -* Your ntrboot compatible flashcart -* Two devices - + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart - + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* -* The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) +* ntrbootと互換性のあるフラッシュカード +* 2台の本体 + + **ソースとなるNDS / NDSL**: フラッシュカードと互換性のあるNintendo DSもしくはNintendo DS Lite + + **ターゲットとなる3DS**: 3DSファミリーのストックファームウェアのデバイス +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; devkitファイルではない)* +* 最新のリリースの [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off **the source NDS / NDSL** -1. Insert your flashcart's SD card into your computer -1. Create a folder named `ntrboot` on the root of your flashcart's SD card -1. Copy `boot9strap_ntr.firm` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your flashcart's SD card -1. Copy `ntrboot_flasher_nds.nds` to your flashcart's SD card -1. Reinsert your flashcart's SD card back into your flashcart -1. Insert your ntrboot compatible DS / DSi flashcart into **the source NDS / NDSL** +1. **ソースとなるNDS / NDSL**の電源を切ります +1. SDカードをPCに挿入します。 +1. `ntrboot` というフォルダをSDカードの直下に作成します +1. `boot9strap_ntr.firm`をboot9strap　ntr `.zip`からフラッシュカードのSDカードの`/ntrboot/`フォルダにコピーします +1. `ntrboot_flasher_nds.nds`をフラッシュカードのSDカードの直下にコピーします +1. SDカードをフラッシュカードに挿入します。 +1. Ntrboot互換のDS / DSiフラッシュカードを **ソースとなるNDS / NDSL**へ挿入します -#### Section II - Flashing ntrboot +#### セクション II - ntrbootの書き込み -1. Launch `ntrboot_flasher_nds.nds` on **the source NDS / NDSL** using your flashcart +1. `ntrboot_flasher_nds.nds`を**ソースとなるNDS / NDSL**でフラッシュカードを使って起動します 1. (A) で続行します -1. Use (Up) and (Down) to select your flashcart +1. (Up) と (Down) を使ってフラッシュカードを選択します 1. (A) で続行します -1. Select "Dump flash" to make a backup of your flashcart's memory -1. Input the key combo given to confirm +1. フラッシュカードのメモリをバックアップするために「Dump flash」を選択してください +1. キーコンボを入力して確認してください 1. (A) で続行します -1. Use (Up) and (Down) to select your flashcart +1. (Up) と (Down) を使ってフラッシュカードを選択します 1. (A) で続行します -1. Select "Inject FIRM" to install boot9strap to your flashcart -1. Input the key combo given to confirm +1. フラッシュカードにboot9strapをインストールするために、"Inject FIRM"を選択してください +1. キーコンボを入力して確認してください 1. (A) で続行します -1. Power off **the source NDS / NDSL** -1. Eject your flashcart from **the source NDS / NDSL** +1. **ソースとなるNDS / NDSL**の電源を切ります +1. **ソースとなるNDS / NDSL** からフラッシュカードを抜きます ___ -### Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) +### 引き続き [boot9strapをインストール (ntrboot)](installing-boot9strap-(ntrboot)) に進んでください。 {: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/formatting-sd-(linux).txt b/_pages/ja_JP/formatting-sd-(linux).txt new file mode 100644 index 0000000000..7ac26333b3 --- /dev/null +++ b/_pages/ja_JP/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "SDをフォーマット (Linux)" +--- + +{% include toc title="目次" %} + +### 必読事項 + +これは3DSで機能するようにSDカードをフォーマットするものです。 + +3DSがすでにSDカードを認識している場合は、この操作は必要ありません。 + +このページはLinuxユーザー向けです。 If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### 手順 +#### セクション I - SDカードがどのスロットにあるかを調べる + +1. SDカードが挿入されていないことを確認してください +1. Linuxの"端末"を起動します +1. `watch "lsblk"と入力します。 +1. SDカードをPCに挿入します +1. 出力を見ます。 以下のように出力されているでしょう。: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. デバイスのマウントポイントをメモしてください。 上記の例では、 `mmcblk0` でした + + `RO`が1に設定されている場合、ロックスイッチが下にスライドしないようにしてください +1. Ctrl + C を押してメニューを終了します + +#### セクション II - SDカードのフォーマット + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. `sudo cfdisk /dev/(上からデバイスマウントポイント)`を入力します +1. パーティションごとに「削除」を押してください +1. SDカード全体のサイズと同じ容量な新しいプライマリパーティションを作成します + + Linuxファイルシステムを持つ新しいパーティションを作成します +1. 種類を選択してメニューを見ます +1. 「W95 FAT32」を見つけて、そのテキストの左側にあるコードをメモしてください +1. 任意のキーを押して、前のステップでメモしたコードを入力してください +1. Enterキーを押し、終了を押してください diff --git a/_pages/ja_JP/formatting-sd-(mac).txt b/_pages/ja_JP/formatting-sd-(mac).txt new file mode 100644 index 0000000000..7eab39860c --- /dev/null +++ b/_pages/ja_JP/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "SDをフォーマット (Mac)" +--- + +{% include toc title="目次" %} + +### 必読事項 + +これは3DSで機能するようにSDカードをフォーマットするものです。 + +3DSがすでにSDカードを認識している場合は、この操作は必要ありません。 + +このページはMacユーザー向けです。 Macをお使いでない場合は、[Formatting-sd-(windows)](formatting-sd-(windows)) または [Formatting-sd-(Linux)](formatting-sd-(linux)) のページをご覧ください。 + +### 手順 + +#### OS X El Capitan (10.11) 以降 + +1. パソコンにSDカードを入れます +1. SDカードにファイルとフォルダがある場合は、コンピュータ上のフォルダにすべてをコピーしてください +1. ディスクユーティリティアプリを実行します +1. 左上の「表示」メニューで「すべてのデバイスを表示」を選択します +1. 左側のパネルでSDカードを選択してください + + 誤って間違ったドライブを消去する可能性があります。正しいデバイスを選択してください。 + {: .notice--danger} + +1. 上部の「消去」をクリックします +1. 名前を入力してください +1. 「フォーマット」が「MS-DOS (FAT)」に設定されていることを確認してください +1. 「Scheme」が「マスターブートレコード」に設定されていることを確認してください + + 「Scheme」が表示されない場合は、「キャンセル」をクリックし、ボリュームの代わりにデバイスを選択してください +1. 「消去」をクリックします +1. フォーマットが完了するのを待ちます +1. 「閉じる」をクリックします +1. フォーマット前に、SDカードにファイルとフォルダがあった場合は、コンピュータからすべてをコピーして戻して下さい。 + +#### OS X Yosemete (10.10) 以下 + +1. パソコンにSDカードを入れます +1. SDカードにファイルとフォルダがある場合は、コンピュータ上のフォルダにすべてをコピーしてください +1. ディスクユーティリティアプリを実行します +1. 左側のパネルでSDカードを選択してください + + 誤って間違ったドライブを消去する可能性があります。正しいデバイスを選択してください。 + {: .notice--danger} + +1. 上部の「パーティション」をクリックします + + 「パーティション」が表示されない場合は、ボリュームの代わりにデバイスを選択してください +1. 「パーティションレイアウト」が「1 パーティション」に設定されていることを確認します。 +1. 名前を入力してください +1. 「フォーマット」が「MS-DOS (FAT)」に設定されていることを確認してください +1. パーティションテーブルの下にある「オプション」をクリックします +1. "マスターブートレコード"を選択 +1. OK をクリックします +1. 「適用」をクリックします。 +1. パーティションをクリックします。 +1. フォーマットが完了するのを待ちます +1. ディスクユーティリティを閉じます +1. フォーマット前に、SDカードにファイルとフォルダがあった場合は、コンピュータからすべてをコピーして戻して下さい。 diff --git a/_pages/ja_JP/formatting-sd-(windows).txt b/_pages/ja_JP/formatting-sd-(windows).txt new file mode 100644 index 0000000000..28d451d3b0 --- /dev/null +++ b/_pages/ja_JP/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "SDカードをフォーマット (Windows)" +--- + +{% include toc title="目次" %} + +### 必ずお読みください + +これは3DSで機能するようにSDカードをフォーマットするものです。 + +3DSがすでにSDカードを認識している場合は、この操作は必要ありません。 + +このページはWindowsユーザー向けです。 Windowsをお使いでない場合、[SDカードをフォーマット (Linux)](formatting-sd-(linux)) または [SDカードをフォーマット (Mac)](formatting-sd-(mac)) をご覧ください。 + +### 必要なもの + +* 最新の[guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### 手順 + +1. パソコンにSDカードを入れます +1. SDカードにファイルとフォルダがある場合は、コンピュータ上のフォルダにすべてをコピーしてください +1. `guiformat.exe`を実行します +1. SDカードのドライブレターは「ドライブ」で選択して下さい。 + + ドライブレターが正しく選択されていることを確認しましょう。正しく選択されていないと、違ったドライブを消してしまう可能性があります。 + {: .notice--danger} + +1. サイズは「アロケーションユニットサイズ」で選択して下さい。 + + SDカードが64GB以下の場合、32768を選択して下さい。 + * SDカードが64GB以上の場合、65536を選択して下さい。 +1. 「ボリュームラベル」は何でも構いません。 +1. 「クイックフォーマット」が選択されていることを確認して下さい。 +1. 「開始」をクリックします +1. OK をクリックします +1. フォーマットが完了するのを待ちます +1. 「閉じる」をクリックします +1. フォーマット前に、SDカードにファイルとフォルダがあった場合は、コンピュータからすべてをコピーして戻して下さい。 + +### よくあるエラー + +* デバイスを開けませんでした: GetLastError()=32 + + ファイルエクスプローラウィンドウなど、SDカードを使用している可能性のあるものをすべて閉じましょう。 diff --git a/_pages/ja_JP/get-started-(new-3ds).txt b/_pages/ja_JP/get-started-(new-3ds).txt index 12f3c56543..b95e81bc22 100644 --- a/_pages/ja_JP/get-started-(new-3ds).txt +++ b/_pages/ja_JP/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Get Started (New 3DS)" +title: "導入(New3DS)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -下の表からあなたのバージョンに合ったページを選択してください。 Note that the "from" and "to" fields are inclusive. 例えば、「9.0.0以降、9.2.0以前」は9.0.0、9.1.0と9.2.0を含めています。 +下の表からあなたのバージョンに合ったページを選択してください。 「以降」と「以前」に付いている数字は範囲に含まれています。 -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Your device version can be found at the bottom right of the top screen of the System Settings. +システム設定のトップ画面の右下にバージョンナンバーを確認できます。 ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} -### Version Table +私たちは、カスタムファームウェアはオンラインで使用しても安全であると信じていますが、 過去には、主に不正行為や疑わしいeShopの行動のために、オンラインネットワークが禁止された事例もあります。 +{: .notice--warning} + +### バージョンライン - + - - - + + + - - - - - - - - - - - + - + - + - - + + - - - + + - - + +
FromTo以降以前アクション
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.0Installing boot9strap (Soundhax)
9.0.01.0.0 11.3.0Homebrew Launcher (Soundhax)boot9strapのインストール (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0boot9strapのインストール (SLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (最新) boot9strapのインストール(browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

すべてのバージョン

ntrboot
(対応するマジコンが必要)

または

boot9strapのインストール(Hardmod)
(はんだ付けが必要)
diff --git a/_pages/ja_JP/get-started-(old-3ds).txt b/_pages/ja_JP/get-started-(old-3ds).txt index 93e502cdd5..be3375ccde 100644 --- a/_pages/ja_JP/get-started-(old-3ds).txt +++ b/_pages/ja_JP/get-started-(old-3ds).txt @@ -1,27 +1,22 @@ --- -title: "Get Started (Old 3DS)" +title: "導入(Old3DS)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -下の表からあなたのバージョンに合ったページを選択してください。 Note that the "from" and "to" fields are inclusive. 例えば、「9.0.0以降、9.2.0以前」は9.0.0、9.1.0と9.2.0を含めています。 +下の表からあなたのバージョンに合ったページを選択してください。 「以降」と「以前」に付いている数字は範囲に含まれています。 -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). その番号が「-0」ならば、ブラウザがインストールされていないことを示します。-0以上のいずれかの番号はそれがインストールされていることを示します。 - -例えば、バージョンは「5.0.0-0U」ならば、「ブラウザなし」欄の「5.0.0以降、5.1.0以前」行に行きます。なぜならシステムバージョンはその範囲に合い、ブラウザがインストールされていないからです。 - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Your device version can be found at the bottom right of the top screen of the System Settings. +システム設定のトップ画面の右下にバージョンナンバーを確認できます。 ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} -### Version Table +私たちは、カスタムファームウェアはオンラインで使用しても安全であると信じていますが、 過去には、主に不正行為や疑わしいeShopの行動のために、オンラインネットワークが禁止された事例もあります。 +{: .notice--warning} + +### バージョンライン @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - + + + - - + + - - - - - - - + + -
以降 以前ブラウザなしブラウザ付きアクション
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
boot9strapのインストール (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.14.0boot9strapのインストール(safecerthax)
11.8.011.8.0Installing boot9strap (DSiWare)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

すべてのバージョン

ntrboot
(対応するマジコンが必要)

または

boot9strapのインストール(Hardmod)
(はんだ付けが必要)
\ No newline at end of file + diff --git a/_pages/ja_JP/get-started.txt b/_pages/ja_JP/get-started.txt index e5fe96dd65..5559ad15f8 100644 --- a/_pages/ja_JP/get-started.txt +++ b/_pages/ja_JP/get-started.txt @@ -1,90 +1,21 @@ --- -title: "Get Started" +title: "はじめに" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -下の表からあなたのバージョンに合ったページを選択してください。 Note that the "from" and "to" fields are inclusive. 例えば、「9.0.0以降、9.2.0以前」は9.0.0、9.1.0と9.2.0を含めています。 - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -まえは3DSをハッキングしたことがあってEmuNAND based CFWセットアップを持っている場合は、SysNANDにあるときすべての手順に従ってください。 Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -始める前には、[H2testw (Windows)](h2testw-(windows))、[F3 (Linux)](f3-(linux))か[F3X (Mac)](f3x-(mac))でSDカードのエラーをチェックするのは万全の策です！ +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +デバイスのモデル、バージョン、リージョンによって、boot9strap搭載のカスタムファームウェアの最終目標を達成するには、異なるステップが必要になります。 このページはあなたを正しい手順に導きます。 -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +デバイスの色は図で表示しているものと違うことがありますが、ボタンの位置とデバイスの機能をよく観察して選んでください。 -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +お使いの3DSの画像をクリックすると、適切なページに移動します。 -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
以降以前Action
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/ja_JP/godmode9-usage.txt b/_pages/ja_JP/godmode9-usage.txt index 3ad87a6e68..8aba030a36 100644 --- a/_pages/ja_JP/godmode9-usage.txt +++ b/_pages/ja_JP/godmode9-usage.txt @@ -1,238 +1,243 @@ --- -title: "GodMode9 Usage" +title: "GodMode9の使用方法" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} -### Required Reading +### 必ずお読みください -GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, the FAT partitions inside your SysNAND and EmuNAND, and basically anything else. Among other functionality, you can copy, delete, rename files, and create folders. +GodMode9はニンテンドー3DSの全てのファイルシステムにアクセスができる道具です。SDカードやSysNAND, EmuNAND内にあるFTAパーティション、その他様々なのもにアクセスすることが出来ます。 他にも、ファイルのコピー、削除、名前の変更、フォルダの作成などの機能があります。 -Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. +SDカードの/luma/payloadsフォルダに +godmode9.firm以外のpayloadファイルがある場合、(START)を押しながら起動すると、「chainloaderメニュー」が表示されます。 +(十字キー)で「GodMode9」を選択して(Aボタン)を押してください。 -GodMode9 is powerful software that has the capability to modify essentially anything on your console. Though many of these modifications are locked behind a permissions system, and it is impossible to accidentally perform dangerous actions without deliberately unlocking permissions, you should still follow instructions carefully and keep backups just in case. +GodMode9は、本体のファイルを操作できる強力なソフトウェアです。 これらの操作の多くは権限システムによってロックされています。こちらが権限を解除せずに、誤って危険なアクションを実行することはありませんが、慎重に指示に従ってください。 -## Updating GodMode9 +## GodMode9の更新 -Some of the instructions below are only applicable to the latest version of GodMode9, and as such you should follow this section to update your copy before continuing. Overwrite any existing files. +以下の手順の一部は、GodMode9の最新バージョンにのみ適用されます。続行する前に、このセクションに従って更新する必要があります。 ファイルは上書きして下さい {: .notice--info} -### What You Need +### 必要なもの -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* v1.9.2pre1の[GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -### Instructions +### 手順 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card -1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card -1. Reinsert your SD card into your device +1. `GodMode9.firm` を GodMode9の `.zip` から取り出し、SDカードの `/luma/payloads/` フォルダにコピーします。 +1. `gm9`フォルダをGodMode9`.zip`からSDカードのルートにコピーします。 +1. 再度、SDカードを本体に挿入してください。 -## Creating a NAND Backup +## NANDバックアップの作成 -1. Launch GodMode9 by holding (Start) during boot -1. Press (Home) to bring up the action menu -1. Select "Scripts..." -1. Select "GM9Megascript" -1. Select "Backup Options" -1. Select "SysNAND Backup" +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します +1. "Backup Options"を選択します +1. "SysNAND Backup"を選択します 1. (A) を押して確認します - + This process will take some time - + If you get an error, make sure that you have at least 1.3GB of free space on your SD card + + この作業には少し時間がかかります + + エラーの場合は、SD カードに1.3GB以上の空き領域があることを確認してください。 1. (A) で続行します -1. Press (B) to return to the main menu -1. Select "Exit" -1. Press (A) to relock write permissions if prompted +1. Bキーを押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます 1. (R) を押したまま (B) を押してSDカードを取り外します 1. パソコンにSDカードを入れます -1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer - + Make backups in multiple locations (such as online file storage) - + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future -1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it -1. Reinsert your SD card into your device - + If your SD card was not detected, hold (R) and press (B) at the same time to remount it +1. SDカードの`/gm9/out/`フォルダから`__sysnand_###.bin`と`essential.exefs`をコンピュータの安全な場所にコピーしてください + オンラインストレージ等任意の場所にファイルのバックアップをするといいです。 + + これらのバックアップはブリックした場合に、NANDイメージからファイルを復元することができます。 +1. バックアップしたら、SDカードの`/gm9/out/`フォルダから`__sysnand_###.bin`と`__sysnand_###.bin.sha`を削除します。 +1. 再度、SDカードを本体に挿入してください。 + + SDカードが検出されなかった場合は、 (R) と (B) を同時に押して再取り付けします -## Restoring a NAND Backup +## NANDバックアップの復元 -1. Launch GodMode9 by holding (Start) during boot +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 1. (R) を押したまま (B) を押してSDカードを取り外します 1. パソコンにSDカードを入れます -1. Copy `__sysnand_###.bin` from your computer to the `/gm9/out/` folder on your SD card -1. Reinsert your SD card into your device -1. Press (Home) to bring up the action menu -1. Select "Scripts..." -1. Select "GM9Megascript" -1. Select "Restore Options" -1. Select "SysNAND Restore (safe)" -1. Select your NAND backup -1. Press (A) to unlock SysNAND (lvl3) writing, then input the key combo given - + This will not overwrite your boot9strap installation - + This process will take some time +1. SDカードの`/gm9/out/` から`__sysnand_###.bin` をコンピュータへコピーします +1. 再度、SDカードを本体に挿入してください。 +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します +1. "Restore Options" を選択します +1. "SysNAND Restore (safe)"を選択します +1. NANDのバックアップを選択します +1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl3) への書き込みを許可します + + これによってboot9strapは上書きされません + + この作業には少し時間がかかります 1. (A) で続行します -1. Press (B) to return to the main menu -1. Select "Exit" -1. Press (A) to relock write permissions if prompted +1. Bキーを押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます -## Injecting any .CIA app into Health & Safety +## .CIA アプリを Health & Safety へインジェクトする -For organizational purposes, copy the `.cia` file you wish to inject to the `/cias/` folder on your SD card +SDカードの `/cias/` フォルダにインジェクトしたい `.cia`ファイルをコピーしてください {: .notice--info} -Note that it is not possible to inject files into Health & Safety that are larger than it (including games and other large applications) +Health & Safetyよりも大きいファイルをインジェクトすることはできません (ゲームやその他の大規模なアプリケーションを含む) {: .notice--info} -1. Launch GodMode9 by holding (Start) during boot -1. Navigate to `[0:] SDCARD` -> `cias` -1. Press (A) on your `.cia` to select it, then select "CIA image options...", then select "Mount image to drive" -1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S" -1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. `[0:] SDCARD` → `cias` へ移動します +1. `.cia` を (A) で選択、"CIA image options..." を選択、 "Mount image to drive" を選択します +1. 拡張子 `.app` のファイルを (A) で選択、"NCCH image options" を選択、 "Inject to H&S" を選択します +1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl1) への書き込みを許可します 1. (A) で続行します -1. Press (A) to relock write permissions if prompted +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます -## Restoring Health & Safety after injecting a .CIA app +## .CIAアプリをインジェクトした後のHealth & Safetyのリストア -This will only work if the Health & Safety injection was performed by GodMode9 (not Decrypt9 or Hourglass9). +これは、Health＆Safety のインジェクトがGodMode9 (Decrypt9またはHourglass9ではない) + によって実行された場合にのみ機能します。 {: .notice--info} -1. Launch GodMode9 by holding (Start) during boot -1. Press (Home) to bring up the action menu -1. Select "More..." -1. Select "Restore H&S" -1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given -1. Press (A) to relock write permissions if prompted +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. (Home) ボタンを押してアクションメニューを呼び出します +1. 「More...」を選択します +1. 「Restore H&S」を選択します +1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl1) への書き込みを許可します +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます -## Dumping a Game Cartridge +## ゲームカードのダンプ {% capture notice %} -Insert the game cartridge you intend to dump into your device - + 3DS game cartridges will be dumped to an installable `.cia` format - + NDS game cartridges will be dumped to a non-installable `.nds` format compatible with flashcarts and emulators +デバイスにダンプしたいゲームカートリッジを挿入してください + + 3DSゲームカートリッジは、インストール可能な `.cia`フォーマットにダンプされます + + NDSのゲームカートリッジは、フラッシュカードやエミュレータと互換性のあるインストール不可能な `.nds`フォーマットにダンプされます {% endcapture %}
{{ notice | markdownify }}
-1. Launch GodMode9 by holding (Start) during boot -1. Navigate to `[C:] GAMECART` -1. Follow the steps applicable to your game cartridge: - + **3DS Game Cartridge:** Press (A) on `[TitleID].trim.3ds` to select it, then select "NCSD image options...", then select "Build CIA from file" - + **NDS Game Cartridge:** Press (A) on `[TitleID].trim.nds` to select it, then select "Copy to 0:/gm9/out" -1. Your installable `.cia` or non-installable `.nds` formatted file will be outputted to the `/gm9/out/` folder on your SD card +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. `[C:] GAMECART`へ移動します +1. ゲームカートリッジに適用される手順に従ってください: + + **3DS ゲームカード:**`[TitleID].trim.3ds` で (A) を押して選択し、"NCSD image options..." から "Build CIA from file" を選択します。 + + **NDS ゲームカード:** `[TitleID].trim.nds` で(A) を押して選択し "Copy to 0:/gm9/out"を選択します +1. インストール可能な `.cia`またはインストール不可能な`.nds`形式のファイルは、SDカードの `/gm9/out/`フォルダに出力されます -## Dumping a Title +## タイトルのダンプ -1. Launch GodMode9 by holding (Start) during boot -1. Hover over the drive applicable to the type of title you wish to dump: - + **User Installed Title**: `[A:] SYSNAND SD` - + **System Title**: `[1:] SYSNAND CTRNAND` -1. Hold (R) and press (A) at the same time to open the drive options -1. Select "Search for titles" +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. ダンプしたいタイトルに該当するドライブへカーソルを合わせます: + + **インストール済みのタイトル**: `[A:] SYSNAND SD` + + **システムタイトル**: `[1:] SYSNAND CTRNAND` +1. (R) と (A) を同時に押してドライブオプションを開きます +1. "Search for titles"を選択します 1. (A) で続行します -1. Press (A) on the `.tmd` file to select it, then select "TMD file options...", then select "Build CIA (standard)" -1. Your installable `.cia` formatted file will be outputted to the `/gm9/out/` folder on your SD card +1. `.tmd` ファイルを (A) で選択し、"TMD file options..." から "Build CIA (standard)"を選択します +1. インストール可能な `.cia`形式のファイルは、SDカードの`/gm9/out/`フォルダに出力されます -## Converting a .3DS to .CIA +## .3DS から .CIAへの変換 {% capture notice %} -+ For organizational purposes, copy each `.3ds` file you wish to convert to the `/cias/` folder on your SD card - + Note that if you wish to convert a `.3ds` file that is already on a flashcart, you should follow [Dumping a Game Cartridge](#dumping-a-game-cartridge) ++ 変換したい `.3ds` ファイルをSDカードの `/cias/` + フォルダにコピーしてください + + 既にflashcart上にある `.3ds`ファイルを変換する場合は、 [ゲームカードのダンプ](#dumping-a-game-cartridge) へ進んでください {% endcapture %}
{{ notice | markdownify }}
-1. Launch GodMode9 by holding (Start) during boot -1. Navigate to `[0:] SDCARD` -> `cias` -1. Press (A) on your `.3ds` file to select it, then select "NCSD image options...", then select "Build CIA from file" -1. Your installable `.cia` formatted file will be outputted to the `/gm9/out/` folder on your SD card +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. `[0:] SDCARD` → `cias` へ移動します +1. `.3ds` ファイルを (A) で選択し、 "NCSD image options..." から "Build CIA from file"を選択します +1. インストール可能な `.cia`形式のファイルは、SDカードの`/gm9/out/`フォルダに出力されます -## Backup GBA VC Saves +## GBA VCセーブのバックアップ -The game will be outputted to the `/gm9/out/` folder on your SD card with the name `.gbavc.sav`. +セーブデータはSDカードの `/gm9/out/` フォルダに`.gbavc.sav`として出力されます {: .notice--info} -To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by hovering over `[A:] SYSNAND SD`, holding (R) and pressing (A) at the same time, then selecting "Search for titles". +`.gbavc.sav`ファイルのタイトルIDを特定するには`[A:] SYSNAND SD`で (R) を押しながら(A)を押すことで "Search for titles" を呼び出せます {: .notice--info} -1. Do the following process for each GBA VC game that you want to backup the save for: - + Launch the GBA VC game - + Exit the GBA VC game - + Boot your device while holding (Start) to launch the Luma3DS chainloader menu - + Launch GodMode9 by pressing (A) - + Navigate to `[S:] SYSNAND VIRTUAL` - + Press (A) on `agbsave.bin` to select it - + Select "AGBSAVE options..." - + Select "Dump GBA VC save" - + Press (A) to continue - + Press (Start) to reboot your device +1. セーブをバックアップするため、GBA VCゲームごとに以下の処理を行います: + + GBA VCゲームを起動します + + GBA VCゲームを終了します + + (Start) を押しながらluma3dsをブートしてチェインローダーメニューを起動します。 + + (A) ボタンで GodMode9 を呼び出します + + `[S:] SYSNAND VIRTUAL`へ移動します + + `agbsave.bin` を(A)で選択します + + "AGBSAVE options..."を選択します + + "Dump GBA VC save"を選択します + + (A) ボタンで続行します + + STARTキーを押してデバイスを再起動します。 -## Restore GBA VC Saves +## GBA VCセーブのリストア -To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by hovering over `[A:] SYSNAND SD`, holding (R) and pressing (A) at the same time, then selecting "Search for titles". +`.gbavc.sav`ファイルのタイトルIDを特定するには`[A:] SYSNAND SD`で (R) を押しながら(A)を押すことで "Search for titles" を呼び出せます {: .notice--info} -1. Do the following process for each GBA VC game that you want to restore the save for: - + Launch the GBA VC game - + Exit the GBA VC game - + Boot your device while holding (Start) to launch the Luma3DS chainloader menu - + Launch GodMode9 by pressing (A) - + Navigate to `[0:] SDCARD` -> `gm9` - + Press (Y) on the `.gbavc.sav` file you wish to restore to copy it - + Press (B) to return to the main menu - + Navigate to `[S:] SYSNAND VIRTUAL` - + Press (A) on `agbsave.bin` to select it - + Select "AGBSAVE options..." - + Select "Inject GBA VC save" - + Press (A) to continue - + Press (Start) to reboot your device - + Launch the GBA VC game - + Exit the GBA VC game +1. セーブを元に戻すGBA VCゲームごとに以下の処理を行います: + + GBA VCゲームを起動します + + GBA VCゲームを終了します + + (Start) を押しながらluma3dsをブートしてチェインローダーメニューを起動します。 + + (A) ボタンで GodMode9 を呼び出します + + `[0:] SDCARD` -> `gm9`へ移動します。 + + (Y) を押し `.gbavc.sav` をリストアします + + (B) を押してメインメニューに戻ります + + `[S:] SYSNAND VIRTUAL`へ移動します + + `agbsave.bin` を(A)で選択します + + "AGBSAVE options..."を選択します + + "Inject GBA VC save"を選択します + + (A) ボタンで続行します + + STARTキーを押してデバイスを再起動します。 + + GBA VCゲームを起動します + + GBA VCゲームを終了します -## Format an SD card +## SDカードのフォーマット -**Note that this will erase the contents of your SD card!** +**SDカードの内容が全消去されますのでご注意ください!** {: .notice--danger} -1. Launch GodMode9 by holding (Start) during boot -1. Press (Home) to bring up the action menu -1. Select "More..." +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. (Home) ボタンを押してアクションメニューを呼び出します +1. 「More...」を選択します 1. 「SD format menu」を選択します -1. Select any EmuNAND options you wish to use - + Most users will want to select "No EmuNAND" +1. 使用するEmuNANDオプションを選択します。 + + ほとんどのユーザーは "No EmuNAND" を選択してください 1. 「Auto」を選択します -1. Press (A) to accept the label `GM9SD` - + Optionally, you may input a custom name for the SD card -1. When prompted, input the key combo given to confirm +1. (A) を押し、ラベルを`GM9SD`とします + + 必要に応じて、SDカードのカスタム名を入力することもできます +1. ヒントが出る時、表示されているキーコンボを入力し、確認します -## Encrypting / Decrypting a .CIA file +## CIAファイルの暗号化 / 復号化 -For organizational purposes, copy each `.cia` file you wish to encrypt / decrypt to the `/cias/` folder on your SD card +暗号化/復号化したい `.cia`ファイルをSDカードの`/cias/`フォルダにコピーしてください {: .notice--info} -1. Launch GodMode9 by holding (Start) during boot -1. Navigate to `[0:] SDCARD` -> `cias` -1. Press (A) on the `.cia` file to select it, then select "CIA image options..." -1. Select the option to perform the desired function: - + **Encrypt to 0:/gm9/out:** Create an encrypted copy of the selected `.cia` file in the `/gm9/out/` folder on your SD card - + **Decrypt to 0:/gm9/out:** Create a decrypted copy of the selected `.cia` file in the `/gm9/out/` folder on your SD card - + **Encrypt inplace:** Replace the selected `.cia` file with an encrypted version - + **Decrypt inplace:** Replace the selected `.cia` file with a decrypted version -1. Your encrypted / decrypted `.cia` will be outputted to the desired location +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. `[0:] SDCARD` → `cias` へ移動します +1. `.cia`ファイルを (A) を押して選択し "CIA image options..." を選択してください。 +1. 目的の機能を実行するためのオプションを選択します: + + **Encrypt to 0:/gm9/out:** 選択した `.cia`ファイルの暗号化されたコピーをSDカードの + `/gm9/out/` フォルダに作成します + + **Decrypt to 0:/gm9/out:** 選択した `.cia`ファイルの復号化されたコピーをSDカードの` / gm9 / out / `フォルダに作成します + + **Encrypt inplace:** 選択した `.cia`ファイルを暗号化されたバージョンに置き換えます + + **Decrypt inplace:** 選択した `.cia`ファイルを復号化されたバージョンに置き換えます +1. 暗号化/復号化された `.cia`が目的の場所に出力されます -## Removing an NNID without formatting your device +## 初期化せずにNNIDを削除する -1. Launch GodMode9 by holding (Start) during boot -1. Press (Home) to bring up the action menu -1. Select "Scripts..." -1. Select "GM9Megascript" -1. Select "Scripts from Plailect's Guide" -1. Select "Remove NNID" +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します +1. "Scripts from Plailect's Guide"を選択します +1. "Remove NNID"を選択します 1. (A) で続行します -1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given +1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl1) への書き込みを許可します 1. (A) で続行します -1. Press (B) to return to the main menu -1. Select "Exit" -1. Press (A) to relock write permissions if prompted -1. Press (Start) to reboot your device +1. Bキーを押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます +1. (Start) ボタンを押して本体を再起動します diff --git a/_pages/ja_JP/h2testw-(windows).txt b/_pages/ja_JP/h2testw-(windows).txt index 7c7859d6e6..a77f748e7f 100644 --- a/_pages/ja_JP/h2testw-(windows).txt +++ b/_pages/ja_JP/h2testw-(windows).txt @@ -2,25 +2,25 @@ title: "H2testw (Windows)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -This is an add-on section for checking your SD card for errors using h2testw. +このアドオンセクションは、h2testwを使用してSDカードのエラーをチェックするための手順です。 SDカードのサイズとコンピュータのパフォーマンスによって、かかる時間は異なり、数時間もかかる場合があります！ このページはWindowsユーザー向けです。 Windowsを使用しないユーザーは、[F3 (linux)](f3-(linux))または[F3X (mac)](f3x-(mac))をご覧ください。 -### What You Need +### 必要なもの * [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip)の最新バージョン -### Instructions +### 手順 1. h2testw `.zip`から`h2testw.exe`をデスクトップにコピーします 1. パソコンにSDカードを入れます -1. Run `h2testw.exe` +1. `h2testw.exe` を実行します 1. 「English」を選択します 1. 「Select target」をクリックします 1. SDカードのディスク文字を選択します @@ -30,11 +30,11 @@ SDカードのサイズとコンピュータのパフォーマンスによって ___ -If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on your SD card +処理結果が「Test finished without errors」ならば、SDカードは正常です。SDカード上の.h2wファイルを全て削除することができます。 {: .notice--success} 結果はそうでなければ、SDカードは壊れた恐れがありますので、新しいSDカードに切り替えることをご検討ください！ {: .notice--danger} -### Return to [Get Started](get-started) +### [はじめに](get-started) に戻る {: .notice--primary} diff --git a/_pages/ja_JP/home.txt b/_pages/ja_JP/home.txt index 23b6527471..a875096dd7 100644 --- a/_pages/ja_JP/home.txt +++ b/_pages/ja_JP/home.txt @@ -1,91 +1,91 @@ --- layout: splash -title: "3DS Hacks Guide" # +title: "3DS 改造ガイド" # header: overlay_color: "#5e616c" # overlay_image: /images/home-page-feature.jpg overlay_filter: 0.5 caption: -excerpt: "A complete guide to 3DS custom firmware,
from stock to boot9strap.
" +抜粋: "3DSのCFW導入ガイド
公式ファームウェアからboot9strapまで。
" --- -For complete guides to homebrew and custom firmware for other devices, check out [Hacks.Guide](https://hacks.guide). +他のゲーム機の自作ソフトとCFWのガイドに関しては、[Hacks.Guide](https://hacks.guide)をご参照ください。 {: .notice--primary} ___ -Thoroughly read all of the introductory pages (including this one!) before proceeding. +作業に移る前にガイドの全てのページ(このページも含む) をしっかりと読んでください。 {: .notice--warning} {% capture notice-1 %} -This guide is for retail (consumer purchased; not from the Nintendo Developer Program) consoles _only_! -If you have a developer ("PANDA") console, check out the [Panda 3DS Hacks Guide](https://panda.hacks.guide). +このガイドは市販の3DS (Nintendo Developer Programで配布される開発機以外) 用です！ +開発機 ("PANDA") コンソールであれば [Panda 3DS Hacksガイド](https://panda.hacks.guide)をチェックしてください。 {% endcapture %}
{{ notice-1 | markdownify }}
{% capture notice-1 %} -This guide is available in other languages! -Click the icon at the top right of the page to change the language. -Alternatively, click [here](https://crowdin.com/project/3ds-guide) to help to keep these translations up to date. +このガイドは他の言語でも閲覧可能です。 +言語を変更する場合は、ページ右上にあるアイコンをクリックしてください。 +また、[このページ](https://crowdin.com/project/3ds-guide)からこのガイドの翻訳を更新する事が可能です。 {% endcapture %}
{{ notice-1 | markdownify }}
-This guide needs *your* help to seed [these]({{ "rss.xml" | absolute_url }}) torrents! +このガイドは、 [これらの]({{ "rss.xml" | absolute_url }}) Torrentをシードしてくださる *あなた* の助けが必要です！ {: .notice--primary} ## Homebrewとは -[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. This includes homebrew tools, applications, games, and emulators. +[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games)は通常、任天堂が許可していないソフトウェアを指します。 これには自作のツール、アプリケーション、ゲーム、エミュレータが含まれます。 -In many cases, running homebrew on your device is 100% free using just the Nintendo 3DS Sound app. There are also various other exploits in commercial games and the browser to get homebrew running. +ほとんどの場合、「ニンテンドー3DSサウンド」の脆弱性を使用するだけで、つまり100％無料で3DSでHomebrewを実行することができます。 他にも、ゲームやインターネットブラウザなどに、Homebrewを起動するための脆弱性は多く存在します。 ## カスタムファームウェアとは **カスタム ファームウェア** ("CFW") は高度な技術によりHomebrewでは実現できないようなハッキングを実現しています。 例えば「署名回避パッチ」は、署名のない、許可されていないソフトをHOMEメニューにインストールできます。 -CFW can be set up on any console on any version (but may require additional tools / accessories for versions >11.3.0). +CFW は、任意のバージョン上の本体でセットアップできます (追加のツールが必要ですが / アクセサリーバージョン > 11.3.0)。 ## ごのガイドでインストールされるもの このガイドの目的は、通常の3DSファームウェアを -firmware to boot9strap powered Custom Firmware. 一部のバージョンではHomebrewを利用していますが、最終的にはカスタムファームウェアを導入します。 +boot9strap搭載のカスタムファームウェアに書き換えることです。 一部のバージョンではHomebrewを利用していますが、最終的にはカスタムファームウェアを導入します。 -boot9strap is the newest and best method of launching Custom Firmware that gives us nearly full control of the system only milliseconds into boot, which is similar to the effect of BootMii for the Wii. It gives us even earlier control than arm9loaderhax did, and, unlike standard sighax, boot9strap uses an NDMA overwrite exploit in order to gain Boot9 code execution. This means that any console running boot9strap is capable of dumping the console unique OTP (`OTP.bin`), the ARM11 bootrom (`boot11.bin`), and the ARM9 bootrom (`boot9.bin`). +boot9strapは、WiiにおけるBootMiiと似た、起動からわずか数ミリ秒で完全にシステムを制御できる、カスタムファームウェアを起動する最新かつ最良の方法です。 これはarm9loaderhaxよりも早期の制御を提供し、標準のsighaxとは異なり、boot9strapはNDMAの上書き攻撃を使用してBoot9コードの実行を取得します。 つまり、boot9strapを実行しているコンソールは、コンソール固有のOTP (`OTP.bin`)、ARM11ブートロム (`boot11.bin`)、およびARM9ブートロム (`boot9.bin`)をダンプできます。 -The benefits of boot9strap over other Custom Firmware launch methods are numerous, and as such it is recommended to use this guide over any other that relies on outdated software (such as menuhax + rxTools, arm9loaderhax, or even normal sighax). +Boot9strapが他のカスタムファームウェアの起動方法よりも多くのメリットがあるため、古いバージョンのソフトウェア (menuhax + rxTools、arm9loaderhax、または普通のsighaxなど) に依存するものよりもこのガイドを使用することをお勧めします。 -For information on how boot9strap works, please see [this paper](https://arxiv.org/abs/1802.00359). +Boot9strapの仕組みについては、[このペーパー](https://arxiv.org/abs/1802.00359)を確認ください。 -For a list of each of the calculated sighax signatures, see [this gist](https://gist.github.com/SciresM/cdd2266efb80175d37eabbe86f9d8c52). +計算されたsighax署名のそれぞれのリストについては[この要旨](https://gist.github.com/SciresM/cdd2266efb80175d37eabbe86f9d8c52)を確認ください。 ## カスタムファームウェアでできること + 地域に関係なく、すべてのゲームカードやダウンロードソフトを遊ぶ -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ ユーザーが作成したHOMEメニューのカスタマイズされた[テーマとスプラッシュスクリーン](https://themeplaza.art/) + 自分が所有するゲームに「ROMハック」を使用する + ゲームとアプリケーションのスクリーン ショットを取る事ができます。 -+ Backup, edit, and restore saves for many games ++ 多くのゲームのバックアップ、編集、および復元保存 + RetroArchを始めとしたエミュレータでレトロゲームを遊ぶ (Newニンテンドー3DS上ではさらに快適に動作します) + HomeBrewをインストールし、HOMEメニューから直接実行 + ゲームカードをインストール可能な形式で吸い出し、ゲームカードを使用せず遊ぶ -+ New 3DS or New 2DS only: stream live gameplay to your PC wirelessly with NTR CFW ++ New 3DSもしくはNew 2DSのみ: NTR CFWを使用し、ゲーム画面をPCに無線ストリーミング + 本体更新により対策されたDSマジコンを起動 + 自作ソフトが起動可能な状態を維持して本体更新 ## 改造する前の注意点 + **ガイドを始める前に、あなたの3DSが復元不可能なBRICK状態になるリスクが有ることを忘れないでください。 稀ではありますが、BRICKする可能性があります。必ず全ての指示に従ってください。** -+ If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ 既に3DSをハッキングしていて、以前のEmuNANDの内容を新しいSysNAND CFWに移動したい場合は、 [セットアップを完了する](finalizing-setup) にて既存のEmuNANDを復元する必要があります。 ++ このガイドはすべての地域のすべてのバージョン(最新版(11.14.0) 含め)) の New 3DS, Old 3DS, New 2DS, Old 2DSで動作します。 すべてが計画通りに進めば、データは全く失われず、導入前にあなたが使用していたすべてのもの (ゲーム、NNID、セーブデータなど) が保持されます。 -+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! -+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). -+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ++ 予期しない電源オフによるデータの損失や損傷を避けるため、導入作業は本体に充電プラグを差し込んだまま行ってください! ++ 使用するSDカードは[GPTではなくMBR](http://freesoft.tvbok.com/tips/efi_installation/gpt_or_mbr.html)でフォーマットされている必要があります。(3DS付属のSDカードは標準でMBRです） これをテストする最も簡単な方法は、SDカードが3DSで動作するかどうかを確認することです。 動作する場合は、SDカードはMBRです。 ++ 新しいSDカードをフォーマットする必要がある場合は、[guiformat (Windows)](formatting-sd-(windows)), [ディスクユーティリティ(Mac)](formatting-sd-(mac))、または [cfdisk (Linux)](formatting-sd-(linux)) を使ってFAT32でフォーマットする必要があります。 ++ Old 2DSはソフトウェアの面ではOld 3DSと同等であり、New 2DSはソフトウェア面ではNew 3DSと同等です。 "Old 3DS" と表記されている手順は旧2DSにも適用でき、"New 3DS" と表記されているものは New 2DS でも適用可能です。 ___ -### Continue to [Get Started](get-started) +### [はじめに](get-started) へ進んでください。 {: .notice--primary} diff --git a/_pages/ja_JP/homebrew-launcher-(alternatives).txt b/_pages/ja_JP/homebrew-launcher-(alternatives).txt index 8f5a6b5a31..113ef71cfd 100644 --- a/_pages/ja_JP/homebrew-launcher-(alternatives).txt +++ b/_pages/ja_JP/homebrew-launcher-(alternatives).txt @@ -1,64 +1,66 @@ --- -title: "Homebrew Launcher (Alternatives)" +title: "Homebrew Launcher (その他の方法)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -This udsploit/safehax exploit is compatible with versions 9.0.0 through 11.3.0. +このudsploit/safehaxエクスプロイトは、バージョン9.0.0から11.3.0と互換性があります。 Homebrew Launcherは色んなエントリーポイントと起動方法があります。 -If browserhax is not an option (see the chart below), you do not already own any of these games, and do not have another 3DS that can access the Homebrew Launcher, the cheapest option is to buy a "Nintendo Selects" copy of [Ocarina of Time 3D](https://amzn.to/2fkaKdp) (ensure you get the correct cartridge for your region) and a [Powersaves](https://amzn.to/2fb3VY7) (compatible with all regions), then use oot3dhax from the chart below. +Browserhaxが使用できず (下の図参照) また、これらのゲームも所有しておらず、Homebrew Launcherにアクセスできる別の3DSを持っていない場合、最も安価な選択肢は "Nintendo Selects"[時のオカリナ + 3D] (https://amzn.to/2fkaKdp) (リージョンに適したカートリッジを確実に入手する)と[Powersaves](https://amzn.to/2fb3VY7) (すべてのリージョンで互換) のoot3dhaxを使用してください。 -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Udsploit (次のページで使用) は、ワイヤレスモジュールを有効にして機能させる必要があり、一部のデバイス (New 3DS、New 2DS、およびOld 2DS) は、ワイヤレス通信設定をHomebrew Launcherに設定します。 ワイヤレス通信はオンにする必要があります。 アクセスポイントに接続する必要はありません。 -To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). +このページにリンクされた `.7z`ファイルを展開するには、[7-Zip](http://www.7-zip.org/) もしくは、 [The Unarchiver](https://theunarchiver.com/) のような解凍ソフトが必要です。 -### What You Need +### 必要なもの -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* +* 最新のリリースの [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新のバージョンの[boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(通常バージョンのboot9strap; `devkit``ntr`ファイルは使用しないでください)* +* [safehax](https://github.com/TiniVi/safehax/releases/latest)の最新バージョン +* 最新のリリースの [udsploit](https://github.com/smealum/udsploit/releases/latest) +* 最新版の[Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* -### Instructions +### 手順 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` +1. SDカードの直下に`3ds`フォルダがない場合、そのフォルダを作成します +1. SDカードのルートに`boot.3dsx`をコピーします +1. Luma3DS `.7z` から `boot.firm` をSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。 +1. SDカードの`/3ds/`フォルダに `safehax.3dsx` をコピーします +1. SDカードの`/3ds/`フォルダに `udsploit.3dsx` をコピーします +1. SafeB9SInstaller `.zip` から `SafeB9SInstaller.bin` をSDカードのルートにコピーします。そのファイルの名前を`safehaxpayload.bin`にリネームします ![]({{ "/images/screenshots/boot9strap-hb-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device -1. Power on your device -1. Use one of the following alternate entrypoints to get into the Homebrew Launcher: +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます +1. これらの代替エントリーポイントを使用してHomebrew Launcherを起動することができます。 | | 必要な条件 | タイプ | デバイス | 地域 | ゲームバージョン | システムバージョン | |:-:|:-:|:-:|:-:|:-:|:-:|:-:| - | [browserhax](https://yls8.mtheall.com/3dsbrowserhax.php) | Nothing | Preinstalled | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-2 up to and including 11.0.0-33 | - | [oot3dhax](https://github.com/yellows8/oot3dhax) | [*Ocarina of Time 3D*](https://amzn.to/2fkaKdp),
Either a powersaves or another 3DS which already has the Homebrew Launcher | Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | - | [smashbroshax](https://gbatemp.net/threads/397194/) | [*Super Smash Bros*](https://amzn.to/2ftGA72) | Cart, eShop | New | EUR, JPN, USA | <1.1.3,
Carts with "amiibo" on the cover are preinstalled with v1.1.4 | 9.0.0-X up to and including 11.3.0-X | + | [browserhax](https://yls8.mtheall.com/3dsbrowserhax.php) | なし | プレインストール済み | New、Old、2DS | EUR、JPN、USA | All | 9.0.0-2 から 11.0.0-33まで対応 | + | [oot3dhax](https://github.com/yellows8/oot3dhax) | [*時のオカリナ 3D*](https://amzn.to/2fkaKdp),
既にpowersavesやHomebrew Launcherを起動できる3DSのみ | カード | New、Old、2DS | EUR、JPN、USA | 全て | 9.0.0-X から 11.7.0-Xまで対応 | + | [smashbroshax](https://gbatemp.net/threads/397194/) | [*大乱闘スマッシュブラザーズ*](https://amzn.to/2ftGA72) | カード、eShop | New | EUR、JPN、USA | <1.1.3まで、
カバーに "amiibo" がついているカードはv1.1.4です | 9.0.0-X から 11.3.0-Xまで対応 | | [supermysterychunkhax](https://smd.salthax.org/) | [*ポケモン超不思議のダンジョン*](http://amzn.asia/4heXBqR)、
Homebrew Launcherにアクセスできる3DS | カード | New、Old、2DS | EUR、JPN、USA | すべて | 9.9.0-X（USA/JPN）/ 10.2.0-X（EUR）から11.0.0-Xまで | - | [freakyhax](http://plutooo.github.io/freakyhax/) | [*Freakyforms Deluxe*](https://amzn.to/2f6eHO7) | eShop, Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | - | [basehaxx](http://mrnbayoh.github.io/basehaxx/) | *Pokemon [Omega Ruby](https://amzn.to/2eRILNQ)/[Alpha Sapphire](https://amzn.to/2ebGrmN)*,
Another 3DS which already has the Homebrew Launcher | Cart | New, Old, 2DS | EUR, JPN, USA | 1.0, 1.4 | 9.0.0-X up to and including 11.3.0-X | + | [freakyhax](http://plutooo.github.io/freakyhax/) | [*大盛り！いきものづくりクリエイトーイ*](https://amzn.to/2f6eHO7) | eShop、カード | New、Old、2DS | EUR、JPN、USA | 全て | 9.0.0-X から 11.7.0-Xまで対応 | + | [basehaxx](http://mrnbayoh.github.io/basehaxx/) | *ポケモン [オメガルビー](https://amzn.to/2eRILNQ)/[アルファサファイア](https://amzn.to/2ebGrmN)*,
既にHomebrew Launcherが起動できる3DS | カード | New、Old、2DS | EUR、JPN、USA | 1.0、1.4 | 9.0.0-X から 11.3.0-Xまで対応 | | [BASICSploit](https://mrnbayoh.github.io/basicsploit/) | [*プチコン3号 SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | New、Old、2DS | USAのみ | 3.2.1 | 9.0.0-Xから11.0.0-X（含む）まで | | [smilehax](https://plutooo.github.io/smilehax/) | [*プチコン3号 SmileBASIC*](https://www.nintendo.co.jp/titles/50010000027755) | eShop | New、Old、2DS | JPN、USA | 3.3.1 | 9.0.0-Xから11.0.0-X（含む）まで | - | [stickerhax](https://github.com/yellows8/stickerhax) | [*Paper Mario: Sticker Star*](https://amzn.to/2f6aDx8),
Another 3DS which already has the Homebrew Launcher | eShop, Cart | New, Old, 2DS | EUR, JPN, KOR, USA | All | 9.0.0-X up to and including 11.3.0-X | - | [Ninjhax 2](http://smealum.github.io/ninjhax2/) | [*Cubic Ninja*](https://amzn.to/2eRI1by) | eShop, Cart | New, Old, 2DS | EUR, JPN, USA | All | 9.0.0-X up to and including 11.7.0-X | - | [Notehax](https://mrnbayoh.github.io/notehax/) | [*Flipnote Studio 3D*](https://my.nintendo.com/rewards/0391c34c430369c0) | eShop | New, Old, 2DS | EUR, JPN, USA | 1.3.1 (JPN) / 1.0.0 (EUR/USA) | 9.0.0-X up to and including 11.5.0-X | - | [RPwnG](https://mrnbayoh.github.io/rpwng/) | [*RPG Maker Player*](http://www.nintendo.com/games/detail/rpg-maker-player-3ds) | eShop | New, Old, 2DS | EUR, JPN, USA | 1.1.4 (EUR) / 1.1.2 (JPN/USA) | 9.0.0-X up to and including 11.5.0-X | + | [stickerhax](https://github.com/yellows8/stickerhax) | [*ペーパーマリオ スーパーシール*](https://amzn.to/2f6aDx8),
既にHomebrew Launcherが起動できる3DS | eShop、カード | New、Old、2DS | EUR、JPN、KOR、USA | 全て | 9.0.0-X から + 11.3.0-Xまで対応 | + | [Ninjhax 2](http://smealum.github.io/ninjhax2/) | [*キュービックニンジャ*](https://amzn.to/2eRI1by) | eShop、カード | New、Old、2DS | EUR、JPN、USA | 全て | 9.0.0-X から 11.7.0-Xまで対応 | + | [Notehax](https://mrnbayoh.github.io/notehax/) | [*うごくメモ帳 3D*](https://my.nintendo.com/rewards/0391c34c430369c0) | eShop | New、Old、2DS | EUR、JPN、USA | 1.3.1 (JPN) / 1.0.0 (EUR/USA) | 9.0.0-X から 11.5.0-Xまで対応 | + | [RPwnG](https://mrnbayoh.github.io/rpwng/) | [*RPGツクール フェス プレイヤー *](http://www.nintendo.com/games/detail/rpg-maker-player-3ds) | eShop | New、Old、2DS | EUR、JPN、USA | 1.1.4 (EUR) / 1.1.2 (JPN/USA) | 9.0.0-X から 11.5.0-Xまで | | [GenHax](https://github.com/svanheulen/genhax_proxy_installer) | [*モンスターハンタークロス*](http://amzn.asia/2EPWGTD) | eShop | New | JPN | すべて | 9.9.0-Xから11.2.0-X（含む）まで | {: .notice--info} @@ -76,10 +78,10 @@ To extract the `.7z` files linked on this page, you will need a file archiver li -1. Your device should load the Homebrew Launcher +1. デバイスでHomebrew Launcherが起動されます ![]({{ "/images/screenshots/homebrew-launcher.png" | absolute_url }}) {: .notice--info} -### Continue to [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) +### [boot9strapのインストール (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) へ進んでください。 {: .notice--primary} diff --git a/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt b/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt index 18967c3719..5f35f7caab 100644 --- a/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt @@ -1,66 +1,6 @@ --- -title: "Homebrew Launcher (BrowserHax 2020)" +title: “Homebrew Launcher (BrowserHax 2020)” --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +使用されているメソッドが古いため、このページは削除されました。 [始める](get-started) ページにリンクされた最新の情報を使用してください。 +{: .notice--warning} diff --git a/_pages/ja_JP/homebrew-launcher-(pichaxx).txt b/_pages/ja_JP/homebrew-launcher-(pichaxx).txt index 9617f6e756..df7a8f8a5a 100644 --- a/_pages/ja_JP/homebrew-launcher-(pichaxx).txt +++ b/_pages/ja_JP/homebrew-launcher-(pichaxx).txt @@ -1,54 +1,58 @@ --- -title: "Homebrew Launcher (PicHaxx)" +title: "Homebrew Launcher (PicHaxxx)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Pokemon Picross, this process will overwrite your game's save file! +Seedminerベースのメソッドは、より簡単で安全なメソッドに置き換えられました。 このページの手順に従う理由がない場合は、[始める](get-started) に戻ってください(例えば、L/Rボタンが壊れているなど)。 {: .notice--warning} -### What You Need +### 必読事項 -* The free eShop game "Pokemon Picross" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +この方法は、Seedminer による脆弱性を用いたあなたの `movable.sed` ファイルで、DSiWareタイトルを復号化し、脆弱性のあるDSiWareタイトルを「DSソフト用設定」アプリに挿入するために使用します。 このメソッドは、すでにeShopから無料の「ポケモンピクロス」ゲームを所有している(またはダウンロードする) 必要があります。 -### Instructions +お使いのデバイスがすでにHomebrew Launcherにアクセスできている場合(PicHaxxや他の脆弱性を使用している場合)、 [Frogtool](installing-boot9strap-(frogtool)) にスキップすることができます。 +{: .notice--success} -#### Section I - Prep Work +すでにポケモンピロスをお持ちの場合は、このプロセスはあなたのセーブデータを上書きします! +{: .notice--warning} -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename -1. Create a folder named `3ds` on the root of your SD card if it does not already exist +### 必要なもの -#### Section II - PicHaxx +*無料のeShopからのゲーム「ポケモンピクロス」 +* [Seedminer](seedminer) より作成した、 `movable.sed` ファイル +* 最新のリリースの [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* [otherapp payload](https://deadphiex8091.github.io/3ds/#otherapp) *(お使いの地域、デバイス、バージョン用のものを使用してください。)* + + 現在のバージョンが 11.14.0-46 の場合は、 11.13.0-45 を選択してください -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer -1. Select your `movable.sed` file -1. Select "Build and Download" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Pokemon Picross" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. +### 手順 + +#### セクション I - 準備 + +1. SDカードのルートに`boot.3dsx`をコピーします +1. OtherappペイロードをSDカード直下にコピーし、ファイル名を `otherapp.bin` に変更します + + `.bin`拡張子が表示されない場合でも、ファイル名の末尾に追加しないでください +1. SDカードの直下に`3ds`フォルダがない場合、そのフォルダを作成します + +#### セクション II - PicHaxx + +1. コンピュータで　[the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php)を開きます。 +1. `movable.sed`ファイルを選択します +1. 「Build and Download」を選択します +1. 処理が完了するまで待ちます +1. `Nintendo 3DS` -> `` -> `` -> `title` -> `0040000` -> `0017c100` -> `data` へ移動します + + ここでいう `` は先ほど [Seedminer](seedminer) で使用したものと同じです。 + + `` は ` ` の中の32文字の長いフォルダのことです。 +1. 新しくダウンロードした`00000001.sav`ファイルをSDカードの`data`フォルダにコピーします + + プロンプトが表示されたら古い保存ファイルを上書きします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます +1. 「ポケモンピクロス」を起動します +1. Exploitが成功した場合、デバイスはHomebrew Launcherを起動します + + アプリケーションが見つからないというエラーが表示されます +1. 本体の電源を切ります。 ___ -### Continue to [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) +引き続き [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) へ進んでください。 {: .notice--primary} diff --git a/_pages/ja_JP/homebrew-launcher-(soundhax).txt b/_pages/ja_JP/homebrew-launcher-(soundhax).txt index f92c1a2ab7..bb24164f4d 100644 --- a/_pages/ja_JP/homebrew-launcher-(soundhax).txt +++ b/_pages/ja_JP/homebrew-launcher-(soundhax).txt @@ -2,75 +2,76 @@ title: "Homebrew Launcher (Soundhax)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 Homebrew Launcherには、さまざまなエントリーポイントや起動方法があります。 -Soundhax (when combined with the Homebrew Launcher) is compatible with versions 9.0.0 through 11.3.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (Homebrew Launcherとの組み合わせ) は、EUR、JPN、KOR、およびUSAのリージョンのバージョン9.0.0 から 11.3.0に対応しています。 -Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. +Udsploit (次のページで使用) は、ワイヤレスモジュールを有効にして機能させる必要があり、一部のデバイス (New 3DS、New 2DS、およびOld 2DS) は、ワイヤレス通信設定をHomebrew Launcherに設定します。 ワイヤレス通信はオンにする必要があります。 アクセスポイントに接続する必要はありません。 {% capture notice-1 %} -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. +ゲームカード経由のアップデートでは、システム設定、ホーム メニューなどのコア機能のみが更新されますのでご注意ください。 ゲームカード経由の更新ではシステムを転送、インターネット ブラウザー、Mii 広場 e ショップなどのネットワーク機能部分とニンテンドー3DSサウンドの更新は提供されません。 -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! その場合、[その他の方法](homebrew-launcher-(alternatives))でHomebrew Launcherを実行しなければなりません！ +したがって、古いニンテンドー3DSサウンドを実装するバージョン *(<2.1.0)* をより高いバージョンのニンテンドー3DSサウンドを実装するバージョンまで更新すると、Soundhaxを実行できません！ その場合、[その他の方法](homebrew-launcher-(alternatives))でHomebrew Launcherを実行しなければなりません！ {% endcapture %}
{{ notice-1 | markdownify }}
-### What You Need +### 必要なもの -* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* -* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* 最新バージョンの [Soundhax](http://soundhax.com/) *(本体に合ったリージョンとバージョンを選択してください)* + + 再生できないビデオとしてブラウザにSoundhaxが表示される場合は、Ctrl+SまたはCmd+Sを押してコンピュータに保存します +* 最新安定版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * +* 最新安定版 [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* +* 最新のリリースの [udsploit](https://github.com/smealum/udsploit/releases/latest) +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) +* [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(お使いの地域とデバイスとバージョンを選択してください)* -### Instructions +### 手順 -1. Power off your device +1. デバイスの電源を切ります 1. パソコンにSDカードを入れます -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -1. Copy `udsploit.3dsx` to the `/3ds/` folder on your SD card -1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card and rename `SafeB9SInstaller.bin` to `safehaxpayload.bin` +1. SDカードの直下に`3ds`フォルダがない場合、そのフォルダを作成します +1. SoundHaxの `.m4a` ファイルをSDカード直下にコピーします +1. OtherappペイロードをSDカード直下にコピーし、ファイル名を `otherapp.bin` に変更します +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。 +1. SDカードの`/3ds/`フォルダに `safehax.3dsx` をコピーします +1. SDカードの`/3ds/`フォルダに `udsploit.3dsx` をコピーします +1. SafeB9SInstaller `.zip` から `SafeB9SInstaller.bin` をSDカードのルートにコピーします。そのファイルの名前を`safehaxpayload.bin`にリネームします ![]({{ "/images/screenshots/boot9strap-hb-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device -1. Power on your device +1. SDカードをデバイスに再挿入します +1. デバイスの電源を入れます 1. ニンテンドー3DSサウンドを起動します ![]({{ "/images/screenshots/soundhax-welcome.png" | absolute_url }}) {: .notice--info} -1. If you've never opened Nintendo 3DS Sound before and get tips on how to use it from a bird icon, go through all of the bird tips, then close the app normally and relaunch it - + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done +1. 以前にNintendo 3DS Soundを開けたことがない場合は、鳥のアイコンからそれを使用する方法についてのヒントを入手し、鳥のヒントをすべて確認してから、通常通りにアプリを閉じて再起動してください + + このような状況では、すぐにSoundhaxを起動すると、Nintendo 3DS Soundが起動するたびにこれらのヒントが表示されます 1. `/SDCARD`に行って、「<3 nedwill 2016」を再生します + 何度も試行しなければならないことがあります + 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください - + If you get a red screen, ensure you copied `boot.3dsx` (the Homebrew Launcher) to the root of your SD card + + 赤い画面が表示された場合は、SDカードのルートに `boot.3dsx` (the Homebrew Launcher) をコピーしてください ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} -1. If the exploit was successful, your device will have loaded the Homebrew Launcher +1. Exploitが成功した場合、デバイスはHomebrew Launcherを起動します ![]({{ "/images/screenshots/homebrew-launcher.png" | absolute_url }}) {: .notice--info} ___ -### Continue to [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) +### [boot9strapのインストール (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) へ進んでください。 {: .notice--primary} diff --git a/_pages/ja_JP/homebrew-launcher-(steelhax).txt b/_pages/ja_JP/homebrew-launcher-(steelhax).txt index 7e3ca1bff5..a125fdcaa9 100644 --- a/_pages/ja_JP/homebrew-launcher-(steelhax).txt +++ b/_pages/ja_JP/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +使用されているメソッドが古いため、このページは削除されました。 [始める](get-started) ページにリンクされた最新の情報を使用してください。 {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. パソコンにSDカードを入れます -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(2xrsa).txt b/_pages/ja_JP/installing-boot9strap-(2xrsa).txt index 8283b7a437..b0427aceb8 100644 --- a/_pages/ja_JP/installing-boot9strap-(2xrsa).txt +++ b/_pages/ja_JP/installing-boot9strap-(2xrsa).txt @@ -1,58 +1,58 @@ --- -title: "Installing boot9strap (2xrsa)" +title: "boot9strapの導入 (2xrsa)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### What You Need +### 必要なもの -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の[boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; `devkit``ntr`ファイルは使用しないでください)* +* 最新バージョンの[Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` and `arm11.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。 +1. SafeB9SInstaller `.zip` から `arm9.bin` と `arm11.bin` をSDカードのルートにコピーします ![]({{ "/images/screenshots/boot9strap-2xrsa-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device -1. Power on your device +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます -#### Section II - Launching SafeB9SInstaller +#### セクション II - SafeB9SInstallerを起動する -1. Launch the browser and go to the following URL on your device +1. ブラウザを起動して、次のいずれかのURLにアクセスします + `http://2xrsa.hacks.guide` - + If you are on a New 3DS, New 2DS, or Old 2DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up - + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 CTRTransfer - + If you forgot to disable parental controls before CTRTransfering or otherwise cannot access wireless settings, note that the device will autoconnect to any network named `attwifi` with no password - + If you get another error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, you will have booted into SafeB9SInstaller + + New 3DS、New 2DS、もしくはOld 2DSと無線接続がオフの場合、バッテリーを取り外して数秒間充電器のプラグを抜いてから再度有効にしてからバックアップを起動します + + エラー "このサービスはお住まいの地域に利用できません" が発生したら、本体設定でデバイスを2.1.0 ctrtransferでインストールしたシステムのNANDのリージョンに合わせて設定してください + + CTRTransferingの前にペアレンタルコントロールを無効にすることを忘れた場合、またはワイヤレス設定にアクセスできない場合は、デバイスがパスワードなしで `attwifi` という名前のネットワークに自動的に接続するので注意してください + + もし、その他のエラーが発生した場合は [トラブルシューティングガイド](troubleshooting#a-browser-based-exploit-is-not-working) をご覧下さい +1. Exploitが成功すれば、SafeB9SInstallerが起動されます。 -#### Section III - Installing boot9strap +#### セクション III - boot9strapをインストールする -1. Wait for all safety checks to complete -1. When prompted, input the key combo given to install boot9strap -1. Once it has completed, press (A) to reboot your device +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します -#### Section IV - Configuring Luma3DS +#### セクション IV - Luma3DSを設定する -1. Your device should have rebooted into the Luma3DS configuration menu - + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Use the (A) button and the D-Pad to turn on the following: +1. デバイスはLuma3DS設定メニューに再起動します + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次のアイテムを有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + If you get an error, just continue the next page + + エラーが発生した場合は、次のページに進んでください ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(browser).txt b/_pages/ja_JP/installing-boot9strap-(browser).txt index 03942dabdd..f398b989a6 100644 --- a/_pages/ja_JP/installing-boot9strap-(browser).txt +++ b/_pages/ja_JP/installing-boot9strap-(browser).txt @@ -1,58 +1,62 @@ --- -title: "Installing boot9strap (Browser)" +title: "boot9strapのインストール (ブラウザ)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### What You Need +### 必読事項 -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +new-browserhax-xl (universal-otherappと組み合わせた場合) は New 3DS および New 2DS のバージョン 11.14.0 と互換性があります。 -### Instructions +このエクスプロイトは、Old 3DS、Old 3DS XL、またはOld 2DSでは動作しません。 お使いのデバイスがNew 3DS、New 3DS XL、またはNew 2DS XLであることを確認してください。 +{: .notice--info} -#### Section I - Prep Work +### 必要なもの -1. Power off your device +* 最新のリリースの [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* 最新安定版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) + +### 手順 + +#### セクション I - 準備 + +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card +1. `otherapp.bin`をSDカードのルートにコピーし、`arm11code.bin`に名前を変更します + + `.bin`拡張子が表示されない場合でも、ファイル名の末尾に追加しないでください +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`をboot9strap`.zip`からSDカードの`boot9strap`フォルダにコピーします +1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} +#### セクション II - SafeB9SInstallerを起動する -1. Reinsert your SD card into your device -1. Power on your device +1. デバイスの電源を入れます +1. ホームメニューで、LボタンとRボタンを同時に押してカメラを開きます + + カメラを開けない場合は、インターネットブラウザを開き、代わりにURLを手動で入力してください (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + + エラーが発生した場合は [トラブルシューティングガイド](troubleshooting#a-browser-based-exploit-is-not-working) をご覧下さい +1. Exploitが成功すれば、SafeB9SInstallerが起動されます。 -#### Section II - Launching SafeB9SInstaller +#### セクション III - boot9strapをインストールする -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) - + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) -1. If the exploit was successful, you will have booted into SafeB9SInstaller +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します -#### Section III - Installing boot9strap +#### セクション IV - Luma3DSを設定する -1. Wait for all safety checks to complete -1. When prompted, input the key combo given to install boot9strap -1. Once it has completed, press (A) to reboot your device - -#### Section IV - Configuring Luma3DS - -1. Your device should have rebooted into the Luma3DS configuration menu - + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Use the (A) button and the D-Pad to turn on the following: +1. デバイスはLuma3DS設定メニューに再起動します + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + If you get an error, just continue the next page ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(fredtool).txt b/_pages/ja_JP/installing-boot9strap-(fredtool).txt index 97551bd32c..f61c4e8b9c 100644 --- a/_pages/ja_JP/installing-boot9strap-(fredtool).txt +++ b/_pages/ja_JP/installing-boot9strap-(fredtool).txt @@ -1,102 +1,105 @@ --- -title: "Installing Boot9strap (Fredtool)" +title: "Boot9strap (Fredtool) のインストール" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +Seedminerベースのメソッドは、より簡単で安全なメソッドに置き換えられました。 このページの手順に従う理由がない場合は、[始める](get-started) に戻ってください(例えば、L/Rボタンが壊れているなど)。 +{: .notice--warning} -This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. +### 必読事項 -This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). +この方法は、Seedminer による脆弱性を用いたあなたの `movable.sed` ファイルを、DSiWareタイトルを復号化し、脆弱性のあるDSiWareタイトルを「DSソフト用設定」アプリに挿入するために使用します。 ここでは、BannerBomb や the DSiWare Dumper toolなどを利用したDSiWareのバックアップファイルが必要です。 -### What You Need +下記の方法はすべて「FIRM partitions known-plaintext」脆弱性の有効な活用です。詳しくは [こちら](https://www.3dbrew.org/wiki/3DS_System_Flaws) 。 -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) -* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +### 必要なもの -#### Section I - Prep Work +* DSiWareバックアップ ( [BannerBomb3](bannerbomb3) のSDルート上のバックアップなど) +* [Seedminer](seedminer) より作成した、 `movable.sed` ファイル +* 最新の [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) +* 最新の [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) -1. Power off your device +#### セクション I - 準備 + +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) to the root of your SD card -1. Copy the `private` folder from the Frogminer_save `.zip` to the root of your SD card +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. SDカードのルートに`boot.nds` (B9STool) をコピーします +1. Frogminer_save `.zip`から`private`フォルダをSDカードのルートにコピーします -#### Section II - Fredtool +#### セクション II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer -1. Select your `movable.sed` file for the "Your movable.sed" field -1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field -1. Complete the "I'm not a robot" captcha -1. Select "Start" -1. Wait for the process to complete -1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) -1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder -1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder -1. Reinsert your SD card into your device -1. Power on your device -1. Launch System Settings on your device -1. Navigate to `Data Management` -> `DSiWare` -1. Under the "SD Card" section, select the "Haxxxxxxxxx!" title -1. Select "Copy", then select "OK" -1. Return to main menu of the System Settings -1. Navigate to `Internet Settings` -> `Nintendo DS Connections`, then select "OK" -1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio +1. コンピュータで [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) を開きます。 +1. "Your movable.sed" フィールドにあなたの `movable.sed` ファイルを選択します。 +1. "Your dsiware.bin" フィールドの DSiWare Backup (`<8-character-id>.bin`) ファイルを選択してください +1. 「私はロボットではありません」のキャプチャ認証を行います。 +1. 「開始」を選択します +1. 処理が完了するまで待ちます +1. すべての処理が完了したら、サイトから `movable. sed` ファイルをダウンロードしてください。 + + このファイルには、2つのDSiWareバックアップファイルがあり、1つはクリーンなもの（変更なし）、1つの改造用のもの（エクスプロイト）が含まれています +1. SDカードの`Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare`へ移動します + + ここでいう `` は先ほど [Seedminer](seedminer) で使用したものと同じです。 + + `` は ` ` の中の32文字の長いフォルダのことです。 + + `Nintendo DSiWare`フォルダが存在しない場合は、の中に作成します +1. ダウンロードしたDSiWareアーカイブ（`fredtool_output.zip`）の`output/hax/`フォルダから`42383841.bin`ファイルを`Nintendo DSiWare`フォルダにコピーします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます +1. 「本体設定」を開きます。 +1. `データ管理` -> `DSiWare データ管理` に移動します +1. 「SDカード」セクションで「Haxxxxxxxxx!」タイトルを選択します +1. 「コピー」を選択し、「OK」を選択します +1. システム設定のメインメニューに戻ります +1. `インターネット設定` -> `Nintendo DS Connections` に移動し、"OK" を選択します。 +1. 完了した場合、日本語のうごくメモ帳が開きます -#### Section III - Flipnote Exploit +#### セクション III - "うごくメモ帳" バグ -If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/). +このセクションのビジュアルガイドをご希望の場合は、 [このリンク](https://zoogie.github.io/web/flipnote_directions/) からご利用いただけます。 {: .notice--info} -1. Complete the initial setup process for the launched game until you reach the main menu - + Select the left option whenever prompted during the setup process -1. Using the touch-screen, select the large left box, then select the box with an SD card icon -1. Once the menu loads, select the face icon, then the bottom right icon to continue -1. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen -1. Select the second button along the top with a film-reel icon -1. Scroll right until reel "3/3" is selected -1. Tap the third box with the letter "A" in it -1. Scroll left until reel "1/3" is selected -1. Tap the fourth box with the letter "A" in it -1. If the exploit was successful, your device will have loaded b9sTool -1. Using the D-Pad, move to "Install boot9strap" - + If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open Nintendo DS Connections and start over from the beginning of Section III -1. Press (A), then press START and SELECT at the same time to begin the process -1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device - + You may have to force power off by holding the power button - + If you see the Luma Configuration screen, continue with the guide without powering off +1. メインメニューに到達するまで、うごくメモ帳の初期設定プロセスを完了します + + セットアッププロセス中にプロンプトが表示されるたびに左のオプションを選択します +1. タッチスクリーンを使用して、大きな左のボックスを選択し、SDカードアイコンのあるボックスを選択します +1. メニューが読み込まれたら、顔アイコンを選択し、右下アイコンをクリックして続行します +1. 上部画面に表示されている(X) ボタンまたは(UP) 矢印を押します +1. フィルムリールアイコン付きの上部にある2番目のボタンを選択します +1. 「3/3」リールが選択されるまで右にスクロール +1. 「A」という文字が入った3番目のボックスをタップしてください +1. "1/3" リールが選択されるまで左にスクロール +1. 「A」の文字が入った4番目のボックスをタップしてください +1. エクスプロイトが成功した場合、お使いのデバイスは b9sTool をロードします。 +1. 方向ボタンを使って「boot9strapのインストール(Install boot9strap)」に移動します + + このステップをしなかった場合 boot9strapをインストールするのではなく、システムがホームメニューに戻るため、ニンテンドーDS接続を開いてセクションIIIの初めからやり直す必要があります。 +1. (A) を押し、同時にSTARTとSELECTを押してプロセスを開始します +1. 完了し、下の画面に「完了(done)」と表示されたら、b9sToolを終了し、デバイスの電源を切ってください + + 電源ボタンを長押しして強制的に電源を切る必要があるかもしれません + + Luma3dsの設定画面が表示された場合は、電源を切らずにガイドを続けてください -#### Section IV - Configuring Luma3DS +#### セクション IV - Luma3DSを設定する -1. Boot your device while holding (Select) to launch the Luma configuration menu - + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) -1. Use the (A) button and the D-Pad to turn on the following: +1. (Select) を押したままデバイスを起動し、Luma3DS設定メニューを開きます + + Luma設定メニューの起動時に問題が発生した場合は、[このトラブルシューティングガイドに従ってください](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + しばらくしたらホーム画面が表示されます 黒い画面が5分以上続く場合、[このトラブルシューティングガイドに従ってください](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -#### Section V - Restoring DS Connection Settings +#### セクション V - DS接続設定の復元 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card - + Replace the existing `42383841.bin` file -1. Reinsert your SD card into your device -1. Power on your device -1. Launch System Settings on your device -1. Navigate to `Data Management` -> `DSiWare` -1. Under the "SD Card" section, select the "Nintendo DSi™" title -1. Select "Copy", then select "OK" +1. fredtool_output.zipの"output/clean"フォルダーから"42383841.bin"を`Nintendo 3DS///Nintendo DSiWare/`フォルダーにコピーしてください。 + + 既存の `42383841.bin` ファイルを置き換えてください +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます +1. 「本体設定」を開きます。 +1. `データ管理` -> `DSiWare データ管理` に移動します +1. 「SDカード」セクションで「Nintendo DSi™」のタイトルを選択します +1. 「コピー」を選択し、「OK」を選択します ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(frogtool).txt b/_pages/ja_JP/installing-boot9strap-(frogtool).txt index 5a3cb7bfd3..b89c3bb324 100644 --- a/_pages/ja_JP/installing-boot9strap-(frogtool).txt +++ b/_pages/ja_JP/installing-boot9strap-(frogtool).txt @@ -1,80 +1,103 @@ --- -title: "Installing Boot9strap (Frogtool)" +title: "Boot9strapの導入 (Frogtool)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +Seedminerベースのメソッドは、より簡単で安全なメソッドに置き換えられました。 このページの手順に従う理由がない場合は、[始める](get-started) に戻ってください(例えば、L/Rボタンが壊れているなど)。 +{: .notice--warning} -We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. +### 必読事項 -This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). +今回はHomebrew LauncherにアクセスしてFrogtool ユーティリティを実行し、日本語版「うごくメモ帳」タイトルを注入します。 b9sToolを実行しboot9strapをインストールするのに使います。 -To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). +下記の方法はすべて「FIRM partitions known-plaintext」脆弱性の有効な活用です。詳しくは [ここを参考にしてください](https://www.3dbrew.org/wiki/3DS_System_Flaws) 。 -### What You Need +このページの [マグネット](https://wikipedia.org/wiki/Magnet_URI_scheme) リンクを使用するには、[Deluge](http://dev.deluge-torrent.org/wiki/Download)のようなTorrentクライアントが必要です。 -* Your `movable.sed` file from completing [Seedminer](seedminer) -* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) -* The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) -* The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +### 必要なもの -#### Section I - Prep Work +* [Seedminer](seedminer) より作成した、 `movable.sed` ファイル +* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) +* 最新の[Frogtool](https://github.com/zoogie/Frogtool/releases/latest) +* 最新安定版 [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) + +#### セクション I - 準備 1. パソコンにSDカードを入れます -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card -1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card -1. Copy `frogcert.bin` to the root of your SD card -1. Reinsert your SD card into your device -1. Power on your device +1. SDカードのルートに`movable.sed`をコピーします +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. b9sTool release `.zip` から`boot.nds` (b9sTool) をSDカードのルートにコピーします +1. `Frogtool.3dsx`をSDカードの`/3ds/`フォルダにコピーします +1. SDカードのルートに`frogcert.bin`をコピーします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます -#### Section II - Patching DS Download Play +#### セクション II - DS ダウンロードプレイのパッチ -1. Open the Homebrew Launcher using any method -1. Launch Frogtool from the list of homebrew -1. Select the "INJECT patched DS Download Play" option -1. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play -1. Once this operation has finished, read the screens and check if the process was successful - + If there are any errors or missing files, correct the problem and try again -1. If the process was successful, tap the touch screen, then select "BOOT patched DS Download Play" -1. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio +1. 任意の方法でHomebrew Launcherを開きます +1. HomebrewのリストからFrogtoolを起動します +1. "INJECT patched DS Download Play"オプションを選択します。 +1. Frogtoolは自動的に実行され、Flipnote StudioのJPNバージョンをDSダウンロードプレイに注入します +1. この操作が完了したら、画面を読んでプロセスが成功したかどうかを確認してください + + エラーやファイルが見つからない場合は、問題を修正してもう一度やり直してください +1. 処理が成功した場合は、タッチスクリーンをタップし、「BOOT patched DS Download Play」を選択します。 +1. 完了した場合、日本語のうごくメモ帳が開きます -#### Section III - Flipnote Exploit +#### セクション III - "うごくメモ帳" バグ -If you would prefer a visual guide to this section, one is available [here](https://zoogie.github.io/web/flipnote_directions/). +このセクションのビジュアルガイドをご希望の場合は、 [このリンク](https://zoogie.github.io/web/flipnote_directions/) からご利用いただけます。 {: .notice--info} -1. Complete the initial setup process for the launched game until you reach the main menu - + Select the left option whenever prompted during the setup process -1. Using the touch-screen, select the large left box, then select the box with an SD card icon -1. Once the menu loads, select the face icon, then the bottom right icon to continue -1. Select the frog icon at the bottom left - + Alternatively, press (X) or (UP) on the D-Pad depending on which is shown on the top screen -1. Select the second button along the top with a film-reel icon -1. Scroll right until reel "3/3" is selected -1. Tap the third box with the letter "A" in it -1. Scroll left until reel "1/3" is selected -1. Tap the fourth box with the letter "A" in it -1. If the exploit was successful, your device will have loaded b9sTool -1. Using the D-Pad, move to "Install boot9strap" -1. Press (A), then press START and SELECT at the same time to begin the process -1. Once complete and the bottom screen says "done.", exit b9sTool, then power off your device - + You may have to force power off by holding the power button - + If you see the Luma configuration menu, continue without powering off +1. メインメニューに到達するまで、うごくメモ帳の初期設定プロセスを完了します + + セットアッププロセス中にプロンプトが表示されるたびに左のオプションを選択します +1. タッチスクリーンを使用して、大きな左のボックスを選択し、SDカードアイコンのあるボックスを選択します +1. メニューが読み込まれたら、顔アイコンを選択し、右下アイコンをクリックして続行します +1. 左下のカエルアイコンを選択してください + + 代わりに、上部画面に表示される方向パッドに応じて (X) または (UP) を押すこともできます +1. フィルムリールアイコン付きの上部にある2番目のボタンを選択します +1. 「3/3」リールが選択されるまで右にスクロール +1. 「A」という文字が入った3番目のボックスをタップしてください +1. "1/3" リールが選択されるまで左にスクロール +1. 「A」の文字が入った4番目のボックスをタップしてください +1. エクスプロイトが成功した場合、お使いのデバイスは b9sTool をロードします。 +1. 方向ボタンを使って「boot9strapのインストール(Install boot9strap)」に移動します +1. (A) を押し、同時にSTARTとSELECTを押してプロセスを開始します +1. 完了し、下の画面に「完了」と表示されたら、b9sToolを終了し、デバイスの電源を切ってください + + 電源ボタンを長押しして強制的に電源を切る必要があるかもしれません + + Luma 設定メニューが表示されたら、電源を切らずに続行します。 -#### Section IV - Configuring Luma3DS +#### セクション IV - Luma3DSを設定する -1. Boot your device while holding (Select) to launch the Luma configuration menu - + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) -1. Use the (A) button and the D-Pad to turn on the following: +1. (Select) を押したままデバイスを起動し、Luma3DS設定メニューを開きます + + Luma設定メニューの起動時に問題が発生した場合は、[このトラブルシューティングガイドに従ってください](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + しばらくしたらホーム画面が表示されます 黒い画面が5分以上続く場合、[このトラブルシューティングガイドに従ってください](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + +#### セクション V - DSダウンロードプレイを元に戻す + +1. ダウンロードプレイを開いて下さい (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. 画面が表示されるまで待ちます + + どの選択肢も押さないでください +1. (Lボタン) + (十字キー下) + (Select) を同時に押してRosalina menu を開きます +1. "Miscellaneous options​"を選びます。 +1. "Switch the hb. title to the current app."を選びます。 +1. (B) ボタンで続行します +1. (B) を押してRosalinaメインメニューに戻ります +1. (B) を押してRosalinaメインメニューを終了します。 +1. Homeボタンを押しダウンロードプレイを閉じます。 +1. ダウンロードプレイをまた開きます。 +1. デバイスでHomebrew Launcherが起動されます +1. HomebrewのリストからFrogtoolを起動します +1. "RESTORE patched DS Download Play"オプションを選択します +1. この操作が完了したら、画面を読んでプロセスが成功したかどうかを確認してください + + エラーやファイルが見つからない場合は、問題を修正してもう一度やり直してください +1. 処理が成功した場合は、タッチスクリーンをタップし、STARTを押して終了します ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(hardmod).txt b/_pages/ja_JP/installing-boot9strap-(hardmod).txt index ab36735c45..bb50031ac2 100644 --- a/_pages/ja_JP/installing-boot9strap-(hardmod).txt +++ b/_pages/ja_JP/installing-boot9strap-(hardmod).txt @@ -1,31 +1,31 @@ --- -title: "Installing boot9strap (Hardmod)" +title: "boot9strapの導入 (Hardmod)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -An excellent guide to getting a hardmod can be found [here](https://gbatemp.net/threads/414498/). +[here](https://gbatemp.net/threads/414498/) ではhardmodを取得する分かりやすいガイドがあります。 -This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws). +下記の方法はすべて「FIRM partitions known-plaintext」脆弱性の有効な活用です。詳しくは [ここを参考にしてください](https://www.3dbrew.org/wiki/3DS_System_Flaws) 。 -To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). +このページの [マグネット](https://wikipedia.org/wiki/Magnet_URI_scheme) リンクを使用するには、[Deluge](http://dev.deluge-torrent.org/wiki/Download)のようなTorrentクライアントが必要です。 -To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). +このページにリンクされた `.7z`ファイルを展開するには、[7-Zip](http://www.7-zip.org/) もしくは、 [The Unarchiver](https://theunarchiver.com/) のような解凍ソフトが必要です。 -This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for. +これは New 3DS、New 2DS、Old 3DS、およびOld 2DS に対応する `.firm` を持つすべてのバージョン* で動作します。 -### What You Need +### 必要なもの -* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) - + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The `.firm` corresponding to your device and version: +* [hardmod](https://gbatemp.net/threads/414498/)で取得したNANDイメージ +* 最新のバージョンの[boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(通常バージョンのboot9strap; `devkit``ntr`ファイルは使用しないでください)* +[hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)の最新のバージョン + + Windowsユーザーはコンパイルされた`.exe`を使用できますが、MacとLinuxユーザーは`.py`を実行するには[Python 3](https://www.python.org/downloads/)をインストールする必要があります。 +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) +* デバイスとバージョンに対応する `.firm`: -| Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | +| バージョン | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | |-|-|:-:|:-:| | 1.0.0 | 2.27-0 | [2.27-0_1.0_OLD.firm](magnet:?xt=urn:btih:5c86edc67a1827991567b3c326a4182b66647d07&dn=2.27-0_1.0_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | | 1.1.0 | 2.28-0 | [2.28-0_1.1_OLD.firm](magnet:?xt=urn:btih:7c7696ff18e7d83a638b9c80f83052f763fb0fa5&dn=2.28-0_1.1_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | - | @@ -56,41 +56,41 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that | 11.4.0 - 11.7.0 | 2.54-0 | [2.54-0_11.4_OLD.firm](magnet:?xt=urn:btih:0dd89d42ad711f770da899af05ee162ede0d0070&dn=2.54-0_11.4_OLD.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | [2.54-0_11.4_NEW.firm](magnet:?xt=urn:btih:3b59dd43eec3edb133555f58d1180bfb196acbb4&dn=2.54-0_11.4_NEW.firm&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | | 11.8.0 - 11.11.0 | 2.55-0 | [2.55-0_11.8_OLD.firm](magnet:?xt=urn:btih:ee882a07afcf3f6acc676f8dc0ab25f291b643e0&dn=2.55-0%5F11.8%5FOLD.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) | [2.55-0_11.8_NEW.firm](magnet:?xt=urn:btih:97dc6ba91ed243596adb744cc20daa610c10fcab&dn=2.55-0%5F11.8%5FNEW.firm&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) | -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy the hardmod-b9s-installer folder from the hardmod-b9s-installer `.zip` to your computer -1. Copy your downloaded `.firm` to the hardmod-b9s-installer folder on your computer -1. Rename your downloaded `.firm` in the hardmod-b9s-installer folder on your computer to `current.firm` -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the hardmod-b9s-installer folder on your computer -1. Reinsert your SD card into your device -1. Use your hardmod to create a NAND backup -1. Move your NAND backup to the hardmod-b9s-installer folder on your computer and rename it to `NAND.bin` +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. hardmod-b9s-installer `.zip`からhardmod-b9s-installerフォルダをコンピュータにコピーします +1. ダウンロードした`.firm`を、コンピュータのhardmod-b9s-installerフォルダにコピーします +1. コンピュータのhardmod-b9s-installerフォルダにあるダウンロードした`.firm`の名前を`current.firm`に変更します +1. `boot9strap.firm`と`boot9strap.firm.sha`をboot9strap`.zip`からコンピュータのhardmod-b9s-installerフォルダにコピーします +1. 再度、SDカードを本体に挿入してください。 +1. Hardmodを使用してNANDバックアップを作成します +1. コンピュータのhardmod-b9s-installerフォルダにNANDバックアップを移動し、`NAND.bin`に名前を変更します -#### Section II - Installing boot9strap +#### セクション II - boot9strapをインストールする -1. Run hardmod-b9s-installer - + Windows Users: Run `install-b9s.exe` - + Mac and Linux Users: Run `install-b9s.py` -1. Flash your outputted `NAND-patched.bin` to your device with your hardmod -1. Power off your device -1. Disconnect your hardmod -1. Power on your device +1. hardmod-b9s-installerを実行します + + Windows ユーザー: `install-b9s.exe` を実行する + + MacとLinuxユーザー: `install-b9s.py`を実行します +1. Hardmodで出力された`NAND-patched.bin`をデバイスにフラッシュする +1. 本体の電源を切ります。 +1. hardmodの接続を解除 +1. デバイスの電源を入れます -#### Section III - Configuring Luma3DS +#### セクション III - Luma3DSを設定する -1. Your device should have booted into the Luma3DS configuration menu - + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Use the (A) button and the D-Pad to turn on the following: +1. お使いのデバイスはLuma3DS設定メニューを起動しているはずです + + もし黒い画面しか出ない場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + If you get an error, just continue the next page + + エラーが発生した場合は、次のページに進んでください ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt index 2fb37b0325..a7d0d8a51c 100644 --- a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt @@ -1,83 +1,6 @@ --- -title: "Installing boot9strap (HBL-USM)" +title: "boot9strap (HBL-USM) のインストール" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **「Show NAND or user string in System Settings」** -1. (Start) を押してセーブして再起動します - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +使用されているメソッドが古いため、このページは削除されました。 [始める](get-started) ページにリンクされた最新の情報を使用してください。 +{: .notice--warning} diff --git a/_pages/ja_JP/installing-boot9strap-(mset).txt b/_pages/ja_JP/installing-boot9strap-(mset).txt index 1d1d8b7c11..e927eb6221 100644 --- a/_pages/ja_JP/installing-boot9strap-(mset).txt +++ b/_pages/ja_JP/installing-boot9strap-(mset).txt @@ -1,60 +1,60 @@ --- -title: "Installing boot9strap (MSET)" +title: "boot9strapの導入 (MSET)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### What You Need +### 必要なもの -* Any DS flashcart that works on your device version -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 全てのデバイスのバージョンで動作するDSフラッシュカード +* 最新安定版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新安定版[boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; `devkit``ntr`ファイルは使用しないでください)* +* 最新バージョンの[Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` from the SafeB9SInstaller `.zip` to the root of your SD card +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。 +1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.dat`をSDカードのルートへコピーします ![]({{ "/images/screenshots/boot9strap-mset-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device -1. Copy `SafeB9SInstaller.nds` from the SafeB9SInstaller `.zip` to your DS flashcart -1. Power on your device +1. 再度、SDカードを本体に挿入してください。 +1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.nds`をフラッシュカードへコピーします +1. デバイスの電源を入れます -#### Section II - Launching SafeB9SInstaller +#### セクション II - SafeB9SInstallerを起動する -1. Start your DS flashcart from your device -1. Boot `SafeB9SInstaller.nds` using your flashcart -1. Select the correct option for your system version +1. デバイスでDSフラッシュカートを起動します。 +1. フラッシュカードから`SafeB9SInstaller.nds`を起動します。 +1. ご使用のシステムバージョンに対応するオプションを選択します + 4.X.X -> "4.x SafeB9SInstaller" + 6.X.X -> "6.x SafeB9SInstaller" -1. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" -1. If the exploit was successful, you will have booted into SafeB9SInstaller +1. システムを再起動して、本体設定に行って、「その他の設定」に、そして「ユーザー情報」に、「ニンテンドーDS情報」に行きます +1. Exploitが成功すれば、SafeB9SInstallerが起動されます。 -#### Section III - Installing boot9strap +#### セクション III - boot9strapをインストールする -1. Wait for all safety checks to complete -1. When prompted, input the key combo given to install boot9strap -1. Once it has completed, press (A) to reboot your device +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します -#### Section IV - Configuring Luma3DS +#### セクション IV - Luma3DSを設定する -1. Your device should have rebooted into the Luma3DS configuration menu - + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Use the (A) button and the D-Pad to turn on the following: +1. デバイスはLuma3DS設定メニューに再起動します + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + If you get an error, just continue the next page + + エラーが発生した場合は、次のページに進んでください ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt index cdd1eee12a..8dde1383f8 100644 --- a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt +++ b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt @@ -1,141 +1,141 @@ --- -title: "Installing boot9strap (ntrboot)" +title: "boot9strapの導入 (ntrboot)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). +このページの [マグネット](https://wikipedia.org/wiki/Magnet_URI_scheme) リンクを使用するには、[Deluge](http://dev.deluge-torrent.org/wiki/Download)のようなTorrentクライアントが必要です。 -### What You Need +### 必要なもの -* A magnet that triggers the sleep mode of your device (if using a folding style device) -* Your ntrboot flashed flashcart -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 端末にスリープモードを引き起こす磁石（折りたためる3dsを使用する場合） +* ntrbootがフラッシュされたフラッシュカード +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device -1. Insert your device's SD card into your computer - + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. 本体の電源を切ります。 +1. SDカードをPCに挿入します。 + + 3DSのSDカードです。フラッシュカードのSDカードではありません。 +1. `SafeB9SInstaller.firm`をコンソールのSDカードのルートにコピーし、`boot.firm`に名前を変更します。 +1. Luma3DS `.zip` から `boot.3dsx` をコンソールのSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをコンソールのSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、コンソールのSD カードのboot9strapフォルダにコピーします。 ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device -1. Power on your device +1. 3DSにSDカードを入れます +1. デバイスの電源を入れます -#### Section II - ntrboot +#### セクション II - ntrboot -1. Use the magnet to find the spot on your device where the sleep sensor is triggered - + This step is not needed on the old 2DS (which has a sleep mode switch) -1. Power off your device -1. Insert your flashcart into your device -1. Place the magnet on your device to trigger the sleep sensor - + On old 2DS, you should instead enable the sleep mode switch -1. Hold (Start) + (Select) + (X) + (Power) for several seconds, then release the buttons - + It may take a few attempts to get this to work because the positioning is awkward -1. If the exploit was successful, you will have booted into SafeB9SInstaller +1. 磁石を使用して、スリープセンサーがトリガーされているデバイス上のスポットを見つけます。 + + このステップはOld2DS（スリープモードスイッチを備えている）では不要です +1. 本体の電源を切ります。 +1. フラッシュカードをデバイスに挿入してください +1. 端末に磁石を置いてスリープセンサーをトリガーします + + old2DSでは、代わりにスリープモードスイッチを有効にする必要があります +1. (Start) + (Select) + (X) + (Power) を数秒間押し続け、ボタンを離します + + これを動作させるには何度かやり直す必要がある場合があります。 +1. Exploitが成功すれば、SafeB9SInstallerが起動されます。 -#### Section III - Installing boot9strap +#### セクション III - boot9strapをインストールする -1. Wait for all safety checks to complete -1. Remove the magnet from your device - + On old 2DS, you should instead disable the sleep mode switch -1. When prompted, input the key combo given to install boot9strap -1. Once it has completed, force your device to power off by holding down the power button - + Your device will only boot to the SafeB9SInstaller screen until the next section is completed +1. すべてのセーフティチェックが完了するまで待ちます +1. 端末から磁石を取り外します + + old2DSでは、代わりにスリープモードスイッチを無効にする必要があります +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、電源ボタンを押し続けてデバイスの電源を切ってください + + 次のセクションが完了するまで、デバイスは SafeB9SInstaller 画面のみ起動します -#### Section IV - Configuring Luma3DS +#### セクション IV - Luma3DSを設定する 1. パソコンにSDカードを入れます -1. Delete `boot.firm` from the root of your SD card -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Reinsert your SD card into your device -1. Power on your device -1. Your device should have booted into the Luma3DS configuration menu - + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Use the (A) button and the D-Pad to turn on the following: +1. SDカードのルートにある既存の`boot.firm`を削除します +1. Luma3DS `.zip` から `boot.firm` をSDカードのルートにコピーします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます +1. お使いのデバイスはLuma3DS設定メニューを起動しているはずです + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + If you get an error, just continue the next page + + エラーが発生した場合は、次のページに進んでください ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} ___ -The following is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions). +以下はオプションのセクションで、フラッシュカードを元の状態に戻すことができます(標準機能で使用できるようにします)。 -Note that the Acekard 2i retains its ability to launch `.nds` files while having the ntrboot exploit installed. This only applies when the Acekard 2i is in an NDS or custom firmware 3DS! While the ntrboot exploit is installed to the Acekard 2i, it will be unable to launch `.nds` files on DSi or stock 3DS systems. +Acekard 2i は、ntrboot エクスプロイトをインストールしながら、 `.nds` ファイルを起動する機能を保持していることに注意してください。 これは、Acekard 2iがNDSまたはカスタムファームウェア3DSにある場合にのみ適用されます。 ntrbootエクスプロイトはAcekard 2iにインストールされていますが、DSiまたは初期状態の3DSで`.nds`ファイルを起動することはできません。 -Do not follow this section until you have completed the rest of the instructions on this page. +このページの残りの説明を完了するまで、このセクションに従わないでください。 -#### Section V - Removing ntrboot +#### セクション V - ntrbootを削除する -##### What You Need +##### 必要なもの -* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) -* The flashrom backup corresponding to your flashcart - + Note that if you followed [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)), the flashrom backup already exists in the correct location and does not need to be downloaded - + Note that if you followed [Flashing ntrboot (3DS Single System)](flashing-ntrboot-(3ds-single-system)) or [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)), the flashrom backup already exists on your flashcart's SD card and should be copied to the location specified below - + If you do not know which HW revision you have, just try each for your cart of them. Only the correct one will allow your flashcart to launch properly from home menu, but flashing the wrong one will not brick the cart +* 最新の[ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) +* フラッシュカードに対応するフラッシュROMのバックアップ + + [ntrbootのフラッシュ (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) に従った場合に注意してください。 フラッシュROMのバックアップはすでに正しい場所に存在し、ダウンロードする必要はありません + + [Flashing ntrboot (3DS Single System)](flashing-ntrboot-(3ds-single-system)) または [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) をフォローした場合に注意してください。 フラッシュROMのバックアップはすでにフラッシュカードのSDカードに存在し、以下に指定された場所にコピーする必要があります + + どのHWリビジョンを持っているかわからない場合は、カート用にそれぞれお試しください。 正しいものだけがフラッシュカードをホームメニューから正しく起動させますが、間違ったものをフラッシュしてもカートはブリックしません -| Flashcart | Hardware Revision | Flashrom | +| Flashcart | ハードウェアリビジョン | FlashROM | |-|:-:|:-:| | **Ace3DS X** | | *N/A* | -| **Acekard 2i** | HW 81 | - [Acekard_2i_(HW_81)-Flashrom.zip](magnet:?xt=urn:btih:71ce385a1d65e28719c419fe58d171a4873501ff&dn=Acekard%5F2i%5F%28HW%5F81%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **Acekard 2i** | HW 44 | - [Acekard_2i_(HW_44)-Flashrom.zip](magnet:?xt=urn:btih:d04bd19e15bf8600ccef6540bdbd043846888132&dn=Acekard%5F2i%5F%28HW%5F44%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **DSTT** | | *Missing* | -| **Infinity 3 R4i** | HW A5 | - [R4i_Gold_3DS_(HW_A5)-Flashrom.zip](magnet:?xt=urn:btih:c6dee8cc9535d58284ccb8430c9af4682c3e1efc&dn=R4i%5FGold%5F3DS%5F%28HW%5FA5%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4 3D Revolution** | HW A6 | - [R4i_Gold_3DS_(HW_A6)-Flashrom.zip](magnet:?xt=urn:btih:e1675722834b870ea64ddf1ef9ca77d78db2be00&dn=R4i%5FGold%5F3DS%5F%28HW%5FA6%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4i Gold 3DS Deluxe "Starter"** | | *Missing* | -| **R4i Gold 3DS** | HW 4 | - [R4i_Gold_3DS_(HW_4)-Flashrom.zip](magnet:?xt=urn:btih:a742778ade94b4a0b877cc481ba0f1a4120262da&dn=R4i%5FGold%5F3DS%5F%28HW%5F4%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4i Gold 3DS** | HW 5 | *Missing* | -| **R4i Gold 3DS** | HW 6 | *Missing* | -| **R4i Gold 3DS** | HW 7 | *Missing* | -| **R4i Gold 3DS** | HW 8 | *Missing* | -| **R4i Gold 3DS** | HW D | - [R4i_Gold_3DS_(HW_D)-Flashrom.zip](magnet:?xt=urn:btih:0a074dd475a26166d90ae26e313dcbc6d51cfa12&dn=R4i_Gold_3DS_%28HW_D%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **Acekard 2i** | HW 81 | - [R4i_Gold_3DS_(HW_A5)-Flashrom.zip](magnet:?xt=urn:btih:c6dee8cc9535d58284ccb8430c9af4682c3e1efc&dn=R4i%5FGold%5F3DS%5F%28HW%5FA5%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4 3D Revolution** | HW A1 | - [R4i_Gold_3DS_(HW_A6)-Flashrom.zip](magnet:?xt=urn:btih:e1675722834b870ea64ddf1ef9ca77d78db2be00&dn=R4i%5FGold%5F3DS%5F%28HW%5FA6%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS Deluxe "Starter"** | | *見つかりません* | +| **R4i Gold 3DS** | HW 4 | - [R4i_Gold_3DS_(HW_4)-Flashrom.zip](magnet:?xt=urn:btih:a742778ade94b4a0b877cc481ba0f1a4120262da&dn=R4i%5FGold%5F3DS%5F%28HW%5F4%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS** | HW 5 | *見つかりません* | +| **R4i Gold 3DS** | HW 6 | *見つかりません* | +| **R4i Gold 3DS** | HW 7 | *見つかりません* | +| **R4i Gold 3DS** | HW 8 | *見つかりません* | +| **R4i Gold 3DS** | HW D | - [R4i_Gold_3DS_(HW_D)-Flashrom.zip](magnet:?xt=urn:btih:0a074dd475a26166d90ae26e313dcbc6d51cfa12&dn=R4i_Gold_3DS_%28HW_D%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | | **R4i Gold 3DS Plus** | | *N/A* | -| **R4i Gold 3DS RTS** | HW A5 | - [R4i_Gold_3DS_(HW_A5)-Flashrom.zip](magnet:?xt=urn:btih:c6dee8cc9535d58284ccb8430c9af4682c3e1efc&dn=R4i%5FGold%5F3DS%5F%28HW%5FA5%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4i Gold 3DS RTS** | HW A6 | - [R4i_Gold_3DS_(HW_A6)-Flashrom.zip](magnet:?xt=urn:btih:e1675722834b870ea64ddf1ef9ca77d78db2be00&dn=R4i%5FGold%5F3DS%5F%28HW%5FA6%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4i Gold 3DS RTS** | HW A7 | - [R4i_Gold_3DS_(HW_A7)-Flashrom.zip](magnet:?xt=urn:btih:d780a1fbcb83d0d3c99748c87534f77957da98ce&dn=R4i%5FGold%5F3DS%5F%28HW%5FA7%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4i Ultra** | | - [R4i_Ultra-Flashrom.zip](magnet:?xt=urn:btih:e2a080eb70b92d3127ffea2a5be6bbdb1928a438&dn=R4i%5FUltra-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4i-SDHC 3DS RTS** | | - [R4i-SDHC_3DS_RTS-Flashrom.zip](magnet:?xt=urn:btih:11a4a3b6dd1cef5652b49a413d8e8c662449d819&dn=R4i-SDHC%5F3DS%5FRTS-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4i-SDHC B9S** | | - [R4i-SDHC_3DS_RTS-Flashrom.zip](magnet:?xt=urn:btih:11a4a3b6dd1cef5652b49a413d8e8c662449d819&dn=R4i-SDHC%5F3DS%5FRTS-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4iSDHC GOLD Pro 20XX**** | | - [R4iSDHC_GOLD_Pro_20XX-Flashrom.zip](magnet:?xt=urn:btih:f41aeb6b88a986bb0c5246c53132f3b82052f58b&dn=R4iSDHC%5FGOLD%5FPro%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4iSDHC RTS LITE 20XX** | | - [R4iSDHC_RTS_LITE_20XX-Flashrom.zip](magnet:?xt=urn:btih:543f90f7c50ee847af1d2152bdcbe76e7ed364e4&dn=R4iSDHC%5FRTS%5FLITE%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -| **R4iSDHC Dual-Core 20XX** | | - [R4iSDHC_Dual-Core_20XX-Flashrom.zip](magnet:?xt=urn:btih:be5b27b85dcb8a696191a1eddef478f7ab346e06&dn=R4iSDHC%5FDual-Core%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS RTS** | HW A1 | - [R4i_Gold_3DS_(HW_A5)-Flashrom.zip](magnet:?xt=urn:btih:c6dee8cc9535d58284ccb8430c9af4682c3e1efc&dn=R4i%5FGold%5F3DS%5F%28HW%5FA5%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS RTS** | HW A1 | - [R4i_Gold_3DS_(HW_A6)-Flashrom.zip](magnet:?xt=urn:btih:e1675722834b870ea64ddf1ef9ca77d78db2be00&dn=R4i%5FGold%5F3DS%5F%28HW%5FA6%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Gold 3DS RTS** | HW A7 | - [R4i_Gold_3DS_(HW_A7)-Flashrom.zip](magnet:?xt=urn:btih:d780a1fbcb83d0d3c99748c87534f77957da98ce&dn=R4i%5FGold%5F3DS%5F%28HW%5FA7%29-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i Ultra** | | - [R4i_Ultra-Flashrom.zip](magnet:?xt=urn:btih:e2a080eb70b92d3127ffea2a5be6bbdb1928a438&dn=R4i%5FUltra-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i-SDHC 3DS RTS** | | - [R4i-SDHC_3DS_RTS-Flashrom.zip](magnet:?xt=urn:btih:11a4a3b6dd1cef5652b49a413d8e8c662449d819&dn=R4i-SDHC%5F3DS%5FRTS-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4i-SDHC B9S** | | - [R4i-SDHC_3DS_RTS-Flashrom.zip](magnet:?xt=urn:btih:11a4a3b6dd1cef5652b49a413d8e8c662449d819&dn=R4i-SDHC%5F3DS%5FRTS-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4iSDHC GOLD Pro 20XX**** | | - [R4iSDHC_GOLD_Pro_20XX-Flashrom.zip](magnet:?xt=urn:btih:f41aeb6b88a986bb0c5246c53132f3b82052f58b&dn=R4iSDHC%5FGOLD%5FPro%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4iSDHC RTS LITE 20XX** | | - [R4iSDHC_RTS_LITE_20XX-Flashrom.zip](magnet:?xt=urn:btih:543f90f7c50ee847af1d2152bdcbe76e7ed364e4&dn=R4iSDHC%5FRTS%5FLITE%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | +| **R4iSDHC Dual-Core 20XX** | | - [R4iSDHC_Dual-Core_20XX-Flashrom.zip](magnet:?xt=urn:btih:be5b27b85dcb8a696191a1eddef478f7ab346e06&dn=R4iSDHC%5FDual-Core%5F20XX-Flashrom.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) | -##### Instructions +##### 手順 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます - + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Create a folder named `ntrboot` on the root of your SD card -1. Copy the `.bin` file from your flashrom backup `.zip` to the `/ntrboot/` folder on the root of your SD card -1. Create a folder named `payloads` in the `luma` folder on your SD card -1. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on your SD card -1. Reinsert your SD card into your device -1. Insert your ntrboot compatible DS / DSi flashcart into your device -1. Launch ntrboot_flasher by holding (Start) during boot -1. Read the red screen warning + + 3DSのSDカードです。フラッシュカードのSDカードではありません。 +1. `ntrboot` というフォルダをSDカードのルートに作成します +1. フラッシュROMのバックアップ `.zip`から`.bin`ファイルをSDカードのルートにある`/ntrboot/`フォルダにコピーします +1. `payloads`というフォルダをSDカードの`luma`フォルダに作成します +1. `ntrboot_flasher.firm`をSDカードの`/luma/payloads/`フォルダにコピーします +1. 再度、SDカードを本体に挿入してください。 +1. ntrbootと互換性のあるフラッシュカードをデバイスへ入れます。 +1. (START) ボタンを押しながら本体を起動し、ntrboot_flasherを起動させます。 +1. 赤い画面の警告を読んでください 1. (A) で続行します -1. Select your flashcart - + If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option -1. Select "Restore Flash" -1. Press (A) to proceed +1. フラッシュカードを選択します + + 上部にフラッシュカードが表示されない場合は、各オプションの下部の画面をお読みください +1. 「フラッシュの復元」を選択します +1. (A) を押して続行します 1. 処理が完了するまで待ちます -1. Press (A) to return to the main menu -1. Press (B) to power off your device +1. (A) を押してメインメニューに戻ります +1. (B) を押してデバイスの電源を切ってください diff --git a/_pages/ja_JP/installing-boot9strap-(pichaxx).txt b/_pages/ja_JP/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..81dacaf731 --- /dev/null +++ b/_pages/ja_JP/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="目次" %} + +Seedminerベースのメソッドは、より簡単で安全なメソッドに置き換えられました。 このページの手順に従う理由がない場合は、[始める](get-started) に戻ってください(例えば、L/Rボタンが壊れているなど)。 +{: .notice--warning} + +### 必読事項 + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### 必要なもの + +* The game "Pokémon Picross" (free on eShop) +* [Seedminer](seedminer) より作成した、 `movable.sed` ファイル +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) +* 最新のリリースの [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### 手順 + +#### セクション I - 準備 + +1. 本体の電源を切ります。 +1. パソコンにSDカードを入れます +1. SDカードのルートに`otherapp.bin`をコピーします +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。 +1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします + +#### セクション II - PicHaxx + +1. コンピュータで　[the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php)を開きます。 +1. `movable.sed`ファイルを選択します +1. 「Build and Download」を選択します +1. 処理が完了するまで待ちます +1. `Nintendo 3DS` -> `` -> `` -> `title` -> `0040000` -> `0017c100` -> `data` へ移動します + + ここでいう `` は先ほど [Seedminer](seedminer) で使用したものと同じです。 + + `` は ` ` の中の32文字の長いフォルダのことです。 +1. 新しくダウンロードした`00000001.sav`ファイルをSDカードの`data`フォルダにコピーします + + プロンプトが表示されたら古い保存ファイルを上書きします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます +1. 「ポケモンピクロス」を起動します +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### セクション III - boot9strapをインストールする + +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します + +#### セクション IV - Luma3DSを設定する + +1. デバイスはLuma3DS設定メニューに再起動します + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + + **「Show NAND or user string in System Settings」** +1. (Start) を押してセーブして再起動します + + エラーが発生した場合は、次のページに進んでください + +___ + +[セットアップを完了する](finalizing-setup) へ進みます +{: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(safeb9sinstaller).txt b/_pages/ja_JP/installing-boot9strap-(safeb9sinstaller).txt index 17d6969aca..dc32fe6914 100644 --- a/_pages/ja_JP/installing-boot9strap-(safeb9sinstaller).txt +++ b/_pages/ja_JP/installing-boot9strap-(safeb9sinstaller).txt @@ -1,39 +1,39 @@ --- -title: "Installing boot9strap (SafeB9SInstaller)" +title: "boot9strapのインストール (SafeB9SInstaller)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Instructions +### 手順 -#### Section I - Launching SafeB9SInstaller +#### セクション I - SafeB9SInstallerを起動する -1. Launch udsploit from the list of homebrew -1. Once it has completed, press (Start) to exit udsploit - + This may take several tries +1. Homebrewのメニューからudsploitを起動します +1. 作業が完了したら (Start) を押してudsploitを終了します + + 何度も試行しなければならないことがあります + 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください -1. Launch safehax from the list of homebrew - + If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on - + If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19) +1. Homebrewのメニューからsafehaxを起動します + + "PM INIT FAILED" というエラーが表示された場合は、ワイヤレス通信をオンにしてudsploitを実行したことを確認してください + + *それでも* "PM INIT FAILED" エラーが発生した場合は [safehax r19](https://github.com/TiniVi/safehax/releases/tag/r19)を試してみてください。 + 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください -1. If the exploit was successful, you will have booted into SafeB9SInstaller +1. Exploitが成功すれば、SafeB9SInstallerが起動されます。 -#### Section II - Installing boot9strap +#### セクション II - boot9strapをインストールする -1. Wait for all safety checks to complete -1. When prompted, input the key combo given to install boot9strap -1. Once it has completed, press (A) to reboot your device +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します -#### Section III - Configuring Luma3DS +#### セクション III - Luma3DSを設定する -1. Your device should have rebooted into the Luma3DS configuration menu - + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Use the (A) button and the D-Pad to turn on the following: +1. デバイスはLuma3DS設定メニューに再起動します + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + If you get an error, just continue the next page + + エラーが発生した場合は、次のページに進んでください ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/installing-boot9strap-(safecerthax).txt b/_pages/ja_JP/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..12a34a0361 --- /dev/null +++ b/_pages/ja_JP/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "boot9strapの導入 (safecerthax)" +--- + +{% include toc title="目次" %} + +### 必読事項 + +safecerthaxは、すべての地域のすべてのOld 3DSおよびOld 2DSデバイスと互換性があります。 + +(右/左肩)、(D-Pad Up)、(A) ボタンが動作しない場合、またはISPがDNSの変更をリルートしている場合。 [Seedminer](seedminer) のように、別の方法を使用する必要があります。 質問がある場合、[Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)にて英語で質問して下さい。 +{: .notice--warning} + +このエクスプロイトは、New 3DS、New 3DS XL、またはNew 2DS XLでは動作しません。 お使いのデバイスがOld 3DS、Old 3DS XL、またはOld 2DSであることを確認してください。 +{: .notice--info} + +### 必要なもの + +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) + +### 手順 + +#### セクション I - 準備 +1. 本体の電源を切ります。 +1. パソコンにSDカードを入れます +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`をboot9strap`.zip`からSDカードの`boot9strap`フォルダにコピーします +1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます + +#### セクション II - safecerthax DNS +1. 本体設定アプリケーションを起動します +1. `インターネット設定` -> `インターネット接続設定` に移動します +1. ネットワーク接続スロットをクリックし、`設定変更` -> `次のページ (右矢印) ` -> `DNS` に移動します +1. 「DNS 自動取得」を「しない」に設定し、「詳細設定」をクリックします。 +1. プライマリDNSとセカンダリDNSの両方を`054.038.133.070`に設定します +1. OKをクリックし、保存するをクリックします +1. プロンプトが表示されたら、「テスト」をクリックして接続テストを実行します + + テストは成功する必要があります +1. 本体の電源を切ります。 + +#### セクション III - safecerthax +1. 電源が入っていない状態で、(Lボタン)+(Rボタン)+(十字キー上)+(Aボタン) を同時に押して、そのまま電源をつけます。 + + 本体が起動するまでボタンをそのまま押し続けて下さい +1. 「OK」を押して更新を承認します + + アップデートはありません。 そういう仕組みになっています +1. 「承諾」を押して利用規約に同意します + + 更新に失敗し、エラーメッセージが表示されます + + 更新に失敗しない場合は、ISP が DNS の変更を再経由している可能性があります。 別のインターネット接続を試すか、 [Seedminer](seedminer) のような別の方法に従ってください。 +1. 「OK」を押してエラーメッセージを閉じます +1. Exploitが成功すれば、SafeB9SInstallerが起動されます。 + + コンソールがフリーズまたはクラッシュした場合、コンソールの電源を強制的に切った後、このセクションを再試行してください。 + +#### セクション IV - boot9strapのインストール + +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します + +#### セクション V - Luma3DSの設定 + +1. デバイスはLuma3DS設定メニューに再起動します + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + + **「Show NAND or user string in System Settings」** +1. (Start) を押してセーブして再起動します + +#### セクション VI - デフォルトのDNSを復元する +1. 本体設定アプリケーションを起動します +1. `インターネット設定` -> `インターネット接続設定` に移動します +1. ネットワーク接続スロットをクリックし、`設定変更` -> `次のページ (右矢印) ` -> `DNS` に移動します +1. 「DNS 自動取得」を「する」に設定 +1. OKをクリックし、保存するをクリックします +1. プロンプトが表示されたら、「テスト」をクリックして接続テストを実行します + + テストは成功する必要があります +1. 本体の電源を切ります。 + +___ + +[セットアップを完了する](finalizing-setup) へ進みます +{: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(soundhax).txt b/_pages/ja_JP/installing-boot9strap-(soundhax).txt index bfa896a265..dc4f437253 100644 --- a/_pages/ja_JP/installing-boot9strap-(soundhax).txt +++ b/_pages/ja_JP/installing-boot9strap-(soundhax).txt @@ -1,58 +1,48 @@ --- -title: "Installing boot9strap (Soundhax)" +title: "boot9strapの導入 (Soundhax)" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. +Soundhax (universal-otherappと組み合わせた場合) は、すべてのリージョンでバージョン 1.0.0 から 11.3.0 と互換性があります。 -{% capture notice-1 %} +### 必要なもの -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. +* 最新バージョンの [Soundhax](http://soundhax.com/) *(本体に合ったリージョンとバージョンを選択してください)* + + 再生できないビデオとしてブラウザにSoundhaxが表示される場合は、Ctrl+SまたはCmd+Sを押してコンピュータに保存します +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) +* 最新のリリースの [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} +### 手順 -
{{ notice-1 | markdownify }}
+#### セクション I - 準備 -### What You Need - -* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* - -### Instructions - -#### Section I - Prep Work - -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card -1. Reinsert your SD card into your device -1. Power on your device +1. SoundHaxの `.m4a` ファイルをSDカード直下にコピーします +1. SDカードのルートに`otherapp.bin`をコピーします +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。 +1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます -#### Section II - Launching SafeB9SInstaller +#### セクション II - SafeB9SInstallerを起動する -1. Reinsert your SD card into your device -1. Power on your device +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます 1. ニンテンドー3DSサウンドを起動します ![]({{ "/images/screenshots/soundhax-welcome.png" | absolute_url }}) {: .notice--info} -1. If you've never opened Nintendo 3DS Sound before and get tips on how to use it from a bird icon, go through all of the bird tips, then close the app normally and relaunch it - + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done +1. 以前にNintendo 3DS Soundを開けたことがない場合は、鳥のアイコンからそれを使用する方法についてのヒントを入手し、鳥のヒントをすべて確認してから、通常通りにアプリを閉じて再起動してください + + このような状況では、すぐにSoundhaxを起動すると、Nintendo 3DS Soundが起動するたびにこれらのヒントが表示されます 1. `/SDCARD`に行って、「<3 nedwill 2016」を再生します + 何度も試行しなければならないことがあります + 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください @@ -60,24 +50,24 @@ This means that using a cartridge update from a version containing an older Nint ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} -1. If the exploit was successful, you will have booted into SafeB9SInstaller +1. Exploitが成功すれば、SafeB9SInstallerが起動されます。 -#### Section III - Installing boot9strap +#### セクション III - boot9strapをインストールする -1. Wait for all safety checks to complete -1. When prompted, input the key combo given to install boot9strap -1. Once it has completed, press (A) to reboot your device +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します -#### Section IV - Configuring Luma3DS +#### セクション IV - Luma3DSを設定する -1. Your device should have rebooted into the Luma3DS configuration menu - + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -1. Use the (A) button and the D-Pad to turn on the following: +1. デバイスはLuma3DS設定メニューに再起動します + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次のアイテムを有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + If you get an error, just continue the next page + + エラーが発生した場合は、次のページに進んでください ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt b/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..8138750fc8 --- /dev/null +++ b/_pages/ja_JP/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "boot9strapのインストール (SSLoth-Browser)" +--- + +{% include toc title="目次" %} + +### 必読事項 + +SSLoth は、バージョン 11.13 またはそれ以下のユーザーに対してブラウザーのバージョンチェックをバイパスすることができ、結果的にuniversal-otherappとともに使用できるnew-browserhaxまたはold-browserhaxを使用できます。 + +カートリッジを使用してデバイスを現在のバージョンに更新した場合、インターネットブラウザにアクセスできなくなります。 この場合は、 システム設定を使用してデバイスを最新バージョンに更新し、その後、最新バージョンの方法に従う必要があります。 +{: .notice--warning} + +### 必要なもの + +* 最新のリリースの [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) + +#### セクション I - 準備 + +1. 本体の電源を切ります。 +1. パソコンにSDカードを入れます +1. `otherapp.bin`をSDカードのルートにコピーし、`arm11code.bin`に名前を変更します + + `.bin`拡張子が表示されない場合でも、ファイル名の末尾に追加しないでください +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`をboot9strap`.zip`からSDカードの`boot9strap`フォルダにコピーします +1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます + +#### セクション II - SSLoth +1. 本体設定アプリケーションを起動します +1. `インターネット設定` -> `インターネット接続設定` に移動します +1. ネットワーク接続スロットをクリックし、`設定変更` -> `次のページ (右矢印) ` -> `DNS` に移動します +1. 「DNS 自動取得」を「しない」に設定し、「詳細設定」をクリックします。 +1. プライマリDNSとセカンダリDNSの両方を`054.038.133.070`に設定します +1. OKをクリックし、保存するをクリックします +1. プロンプトが表示されたら、「テスト」をクリックして接続テストを実行します + + テストは成功する必要があります +1. 本体の電源を切ります。 + +#### セクション III - SafeB9SInstallerの起動 +1. デバイスの電源を入れます +1. ホームメニューで、LボタンとRボタンを同時に押してカメラを開きます + + カメラを開けない場合は、インターネットブラウザを開き、代わりにURLを手動で入力してください (`https://zoogie.github.io/web/nbhax/`) +1. QRコードのマークをタップし[このQRコード](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L)をスキャンしてください + + エラーが発生した場合は [トラブルシューティングガイド](troubleshooting#a-browser-based-exploit-is-not-working) をご覧下さい + + ブラウザが更新を求める場合、ご使用の ISP が DNS を変更している可能性があります。 別のインターネット接続を試してみるか、コンソールを最新バージョンにアップデートして[boot9strapのインストール(Browser)](installing-boot9strap-(browser)) に従ってください。 +1. Exploitが成功すれば、SafeB9SInstallerが起動されます。 + +#### セクション IV - boot9strapのインストール + +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 +1. 完了したら、(A) を押してデバイスを再起動します + +#### セクション V - Luma3DSの設定 + +1. デバイスはLuma3DS設定メニューに再起動します + + もしブラックスクリーンの場合は[トラブルシューティングガイド](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) をご覧ください +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + + **「Show NAND or user string in System Settings」** +1. (Start) を押してセーブして再起動します + +#### セクション VI - デフォルトのDNSを復元する +1. 本体設定アプリケーションを起動します +1. `インターネット設定` -> `インターネット接続設定` に移動します +1. ネットワーク接続スロットをクリックし、`設定変更` -> `次のページ (右矢印) ` -> `DNS` に移動します +1. 「DNS 自動取得」を「する」に設定 +1. OKをクリックし、保存するをクリックします +1. プロンプトが表示されたら、「テスト」をクリックして接続テストを実行します + + テストは成功する必要があります +1. 本体の電源を切ります。 + +___ + +[セットアップを完了する](finalizing-setup) へ進みます +{: .notice--primary} + + diff --git a/_pages/ja_JP/installing-boot9strap-(usm).txt b/_pages/ja_JP/installing-boot9strap-(usm).txt index fdfb4cfb84..192e788be7 100644 --- a/_pages/ja_JP/installing-boot9strap-(usm).txt +++ b/_pages/ja_JP/installing-boot9strap-(usm).txt @@ -1,92 +1,95 @@ --- -title: "Installing boot9strap (USM)" +title: "boot9strap(USM) の導入" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +Seedminerベースのメソッドは、より簡単で安全なメソッドに置き換えられました。 このページの手順に従う理由がない場合は、[始める](get-started) に戻ってください。 +{: .notice--warning} -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. +### 必ずお読みください -We can do this using an existing exploit, BannerBomb3. +SAFE_MODE を導入するために、開発されたWiFiプロファイルを入れる必要があります。 -To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list. +既存のBannerBomb3を使用してこれを行うことができます。 -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. +接続先のリストに、開発されたWiFiプロファイルを入れるために、システムの暗号化キー(movable.sed)を用いてDSiWareのバックアップを作成します -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. +WiFiプロファイルを入れたら、SAFE_MODEを実行します。これは、WiFiプロファイルを有効にするために、すべての3DS本体に存在する回復機能です。 -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +これらのガイドは、システムバージョン末尾にある「U、E、J、K」にあるように、米国、欧州、日本、韓国の端末で機能します。 -### What You Need +(RボタンまたはLボタン), (十字キー上), (Aボタン) が使えない場合[他の方法](legacy-methods) を試して下さい。 質問がある場合、[Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)にて英語で質問して下さい。 +{: .notice--warning} -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +### 必要なもの -#### Section I - Prep Work +* [Seedminer](seedminer) でダウンロードした `movable.sed` ファイル +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) -1. Upload your movable.sed using the "Choose File" option -1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console +#### セクション I - 準備 + +1. 本体の電源が入っている場合、本体の電源を切ります +1. コンピュータで [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) を開いてください。 +1. "ファイルを選択"から movable.sed ファイルをアップロードします。 +1. "Download unSAFE_MODE-bb3 archive" をクリック + + これにより、`F00D437D5.bin`と呼ばれるエクスプロイトDSiWareと、ZIPアーカイブ内の`usm.bin`という名前のSAFE_MODE-bb3.zip`の脆弱性データファイルがダウンロードされます。 1. パソコンにSDカードを入れます -1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it -1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC - + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします + + SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。 +1. `unSAFE_MODE-bb3.zip`から`usm.bin`をSDカードのルートにコピーします +1. SDカードの`Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare`へ移動します + + ここでいう `` は先ほど [Seedminer](seedminer) で使用したものと同じです。 + + `` は ` ` の中の32文字の長いフォルダのことです。 + + `Nintendo DSiWare`フォルダが存在しない場合は、の中に作成します +1. もし、このフォルダ内に既存のDSiWareのバックアップファイル(`<8-character-id>.bin`) がいくつかあるなら、それらをPCに移してください + + これで Nintendo DSiWare フォルダが空になります。 PCに移すことで、バックアップファイルが削除されることはなくなります。 +1. `F00D43D5.bin` ファイルを `unSAFE_MODE-bb3.zip` から `Nintendo DSiWare` のフォルダにコピーして下さい -#### Section II - BannerBomb3 +#### セクション II - BannerBomb3 -1. Reinsert your SD card into your device -1. Power on your device -1. Launch System Settings on your device -1. Navigate to `Data Management` -> `DSiWare` -1. Click on the SD Card section - + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied - + If the bottom screen does not flash Red, the exploit profile was not copied and you will not be able to complete the next section. Ensure that your files are properly placed, then try again -1. Power off your device +1. 再度、SDカードを本体に挿入してください。 +1. 本体の電源を入れます +1. 「本体設定」を開きます。 +1. `データ管理` -> `DSiWare データ管理` の順に移ります。 +1. SDカードをクリックします。 + + 下の画面が赤色になり、数秒後にホームメニューが起動します。 これはプロファイルが正常にコピーされたことを意味します + + 下の画面が赤くならない場合、プロファイルはコピーされておらず、次のセクションを遂行することはできません。 ファイルが正しく配置されていることを確認し、もう一度やり直してください +1. 本体の電源を切ります。 -#### Section III - unSAFE_MODE +#### セクション III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration +1. 電源が入っていない状態で、(Lボタン)+(Rボタン)+(十字キー上)+(Aボタン) を同時に押して、そのまま電源をつけます。 + + 本体が起動するまでボタンをそのまま押し続けて下さい +1. 「OK」を押して更新を承認します + + アップデートはありません。 そういう仕組みになっています +1. 「承諾」を押して利用規約に同意します +1. エラーコード`003-1099`で更新は最終的に失敗します。 これもそうなるように仕込まれています +1. 「インターネット設定を設定しますか?」と聞かれたら、「はい」を選択します。 +1. 次の画面で、`接続先1`→`設定変更`→`右のページ(右矢印)`→`Proxyの設定`→`詳細設定` の順に進みます + + [この画像](https://uwuu.ca/images/safemode_highlighted.png)を参考にして下さい +1. トップ画面に `B9S install SUCCESS` が表示されたら、いずれかのボタンを押して再起動し、Lumaが立ち上がります。 -#### Section IV - Configuring Luma3DS +#### セクション IV - Luma3DSを設定する -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: +1. Lumaは自動的に表示されます +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) + しばらくしたらホーム画面が表示されます 黒い画面が5分以上続く場合、[このトラブルシューティングガイドに従ってください](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -#### Section V - Restoring WiFi Configuration Profiles +#### セクション V - WiFi設定プロファイルの復元 -1. Launch System Settings on your device -1. Navigate to `Data Management` -> `DSiWare` -1. Click on the SD Card section - + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. 「本体設定」を開きます。 +1. `データ管理` -> `DSiWare データ管理` の順に移ります。 +1. SDカードをクリックします。 + + 下の画面が緑色になり、数秒後にホームメニューが起動します。 これはWiFi設定のプロファイルが正常に復元されたことを意味します +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) -1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup +1. SDカードの`Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare`へ移動します +1. Nintendo DSiWareフォルダから`F00D43D5.bin`を削除します ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ja_JP/legacy-methods.txt b/_pages/ja_JP/legacy-methods.txt index f5cf03e567..5c7a7e759b 100644 --- a/_pages/ja_JP/legacy-methods.txt +++ b/_pages/ja_JP/legacy-methods.txt @@ -1,46 +1,44 @@ --- -title: "Legacy Methods" +title: "他の方法" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必ずお読みください -There have been multiple improvements and advancements to methods for installing CFW over the last short while. +CFWの導入方法は、この短期間で複数の改善と進歩がありました。 -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +そのため、可能な限り[boot9strapのインストール (USM)](installing-boot9strap-(usm)) に従うことをお勧めします。 -However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. +しかし、様々な目的のために、過去の方法がここに保管されています。 そのためには、まず[Seedminer](seedminer) をする必要があります。 -If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for assistance. +質問がある場合、[Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)にて英語で質問して下さい。 -#### Section I - Compatibility Test +####セクションⅠ－互換性テスト -The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. +これからするテストは、3DSの中にある、DSインターネット設定とDSダウンロードプレイのうちのどれかを使います。 -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +DSインターネット設定やDSダウンロードプレイが作動しない場合、PitchaxxなどのHomebrewエントリーポイントを用いて[TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/)で修理する必要があります。 -#### DS Internet Settings Test (used for Fredtool) +####DSインターネット設定テスト(Fredtool用) -1. Go to System Settings, then "Internet Settings", then "Nintendo DS Connections" -1. Press "OK" -1. If your device loads into a "Nintendo Wi-Fi Connection Setup" menu, the test was successful - + If the screen stays black or appears to freeze, the test has failed -1. Exit this menu +1. 「本体設定」に進み、「インターネット設定」から「DSソフト用設定」を選択します。 +1. 「OK」を押します +1. そのまま「Wi-Fi コネクション設定」メニューが読み込まれていれば成功です。 + + 画面が黒いままになったりフリーズした場合は失敗です +1. このメニューを終了します -#### DS Download Play Test (used for Frogtool) +#### DSダウンロードプレイのテスト (Frogtool用) -1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) -1. Select "Nintendo DS" -1. If your device loads into a “Download software via DS Download Play” menu, the test was successful - + If the screen stays black or appears to freeze, the test has failed -1. Exit this menu +1. ダウンロードプレイを開いて下さい (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. 「ニンテンドーDS」を選択 +1. 「DSダウンロードプレイ経由でソフトウェアをダウンロード」とロードした場合は、成功です + + 画面が黒いままになったりフリーズした場合は失敗です +1. このメニューを終了します ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool - + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool - + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file + + L/Rボタンが動作しない場合はこの方法をお勧めします +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + + DSiウェア管理メニューがクラッシュした場合にこの方法をお勧めします。 \ No newline at end of file diff --git a/_pages/ja_JP/move-emunand.txt b/_pages/ja_JP/move-emunand.txt index be4a85a33d..27f8a1706e 100644 --- a/_pages/ja_JP/move-emunand.txt +++ b/_pages/ja_JP/move-emunand.txt @@ -1,176 +1,179 @@ --- -title: "Move EmuNAND" +title: "EmuNANDを移動する" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 このエクストラセクションでは、どうやって古いEmuNANDのコンテンツを新しいSysNAND CFWに移動し、古いEmuNANDパーティションを削除するか紹介します。 EmuNANDとRedNANDは[同じ理論](http://3dbrew.org/wiki/NAND_Redirection)の少々違う実装です。 -Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. +SDカードの/luma/payloadsフォルダに +godmode9.firm以外のペイロードがある場合、 +起動時に (start) を長押しするとchainloaderメニューが表示されます。 +十字キーでgodmode9を選択して　(A) ボタンを押してください。 -You MUST have already installed Luma3DS and boot9strap to use this. +これを使用するには、Luma3DSとboot9strapをインストールしている必要があります。 {: .notice--danger} -### What You Need +### 必要なもの * 既存のEmuNAND -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) +* v1.9.2pre1バージョンのの[GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* 最新の [FBI](https://github.com/Steveice10/FBI/releases/latest) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device +1. デバイスの電源を切ります 1. パソコンにSDカードを入れます -1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card -1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card -1. Reinsert your SD card into your device +1. `GodMode9.firm` を GodMode9の `.zip` から取り出し、SDカードの `/luma/payloads/` フォルダにコピーします。 +1. `gm9`フォルダをGodMode9`.zip`からSDカードのルートにコピーします。 +1. デバイスにSDカードを入れます -#### Section II - Backup SysNAND DSiWare Saves +#### セクション II - DSiWareのセーブデータをバックアップする -If you do not have any DSiWare games or saves that you care about, skip this section. +重要なDSiWareゲームやセーブを持っていない場合、このセクションを読み飛ばしてもいいです。 {: .notice--info} -1. Launch GodMode9 by holding (Start) during boot -1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed -1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue - + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide -1. Navigate to `[2:] SYSNAND TWLN` -> `title` -1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9/out" +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. 重要なファイルのバックアップを作成するように求められたら、(A) ボタンを押して実行し、(A) ボタン を押して完了させてください。 +1. RTC日付/時刻を修正するには、(A) ボタンを押し、日付や時刻を設定してください。終わったら、(A) を押して続けてください。 + +補足 RTCの日付と時刻を修正する必要がある場合は、このガイドの後にシステム設定で時刻を同じように修正する必要があります +1. `[2:] SYSNAND TWLN` -> `title`へ移動します +1. (R) と(A) を同時に押し`00030004`フォルダを選択して "Copy to 0:/gm9/out" を選択します + たくさんのDSiWareゲームがインストールされている場合この作業には少し時間がかかることがあります -1. Press (B) twice to return to the main menu +1. Bキーを二回押してメインメニューに戻ります。 -#### Section III - Backup GBA VC Saves +#### セクション III - GBA VCのセーブデータをバックアップする -If you do not have any GBA VC games or saves that you care about, skip this section. +重要なGBA VCゲームやセーブを持っていない場合、このセクションを読み飛ばしてもいいです。 {: .notice--info} -Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc) +このセクションはその他のバーチャルコンソールゲーム（GBC、NESなど）には必要ありません {: .notice--info} -The game will be outputted to the `/gm9/out/` folder on your SD card with the name `.gbavc.sav`. +セーブデータはSDカードの `/gm9/out/` フォルダに`.gbavc.sav`として出力されます {: .notice--info} -To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by hovering over `[A:] SYSNAND SD`, holding (R) and pressing (A) at the same time, then selecting "Search for titles". +`.gbavc.sav`ファイルのタイトルIDを特定するには`[A:] SYSNAND SD`で (R) を押しながら(A)を押すことで "Search for titles" を呼び出せます {: .notice--info} -1. Do the following process for each GBA VC game that you want to backup the save for: - + Launch the GBA VC game - + Exit the GBA VC game - + Boot your device while holding (Start) to launch the Luma3DS chainloader menu - + Launch GodMode9 by pressing (A) - + Navigate to `[S:] SYSNAND VIRTUAL` - + Press (A) on `agbsave.bin` to select it - + Select "AGBSAVE options..." - + Select "Dump GBA VC save" - + Press (A) to continue - + Press (Start) to reboot your device +1. セーブをバックアップするため、GBA VCゲームごとに以下の処理を行います: + + GBA VCゲームを起動します + + GBA VCゲームを終了します + + (Start) を押しながらluma3dsをブートしてチェインローダーメニューを起動します。 + + (A) ボタンで GodMode9 を呼び出します + + `[S:] SYSNAND VIRTUAL`へ移動します + + `agbsave.bin` を(A)で選択します + + "AGBSAVE options..."を選択します + + "Dump GBA VC save"を選択します + + (A) ボタンで続行します + + STARTキーを押してデバイスを再起動します。 -#### Section IV - Copy EmuNAND to SysNAND +#### セクション IV - EmuNANDをSysNANDにコピー -1. Launch GodMode9 by holding (Start) during boot -1. Navigate to `[E:] EMUNAND VIRTUAL` -1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)" -1. Press (A) to unlock SysNAND overwriting, then input the key combo given - + This will not overwrite your boot9strap installation -1. Input the key combo given to unlock SysNAND (lvl1) writing - + This process will take some time -1. Once it has completed, press (A) to continue -1. Press (B) to decline relocking write permissions if prompted -1. Press (B) to return to the main menu +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. `[E:] EMUNAND VIRTUAL`へ移動します +1. (A)を押し`nand.bin`を選択します。次に"NAND image options..."から "Restore SysNAND (safe)"を選択します +1. (A) を押してSysNANDへ書き込みをアンロックします。表示しているキーコンボを入力します + + これによってboot9strapは上書きされません +1. 表示されているキーコンボを入力し、SysNAND (lvl1) への書き込みを許可します + + この作業には少し時間がかかります +1. 作業が完了したら、(A) ボタンを押して続行します +1. Nandへの書き込みのロックを求められた場合、(B) ボタンを押して拒否してください。 +1. Bキーを押してメインメニューに戻ります -#### Section V - Restore DSiWare Saves +#### セクション V - DSiWareセーブを復元 -If you did not backup DSiWare Saves earlier, skip this section. +DSiWareセーブを持っていない場合、このセクションを無視してください。 {: .notice--info} -1. Navigate to `[0:] SDCARD` -> `gm9` -> `out` -1. Press (Y) on the `00030004` folder to copy it -1. Press (B) twice to return to the main menu -1. Navigate to `[2:] SYSNAND TWLN` -> `title` -1. Press (Y) to paste the `00030004` folder -1. Select "Copy path(s)" -1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given -1. Select "Overwrite file(s)" +1. `[0:] SDCARD` -> `gm9` -> `out`へ移動します +1. (Y) を押し`00030004` フォルダをコピーします +1. (B) ボタンを2回押してメインメニューに戻ります +1. `[2:] SYSNAND TWLN` -> `title`へ移動します +1. (Y) を押し `00030004` フォルダを貼り付けます +1. 「Copy path(s)」を選択します +1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl1) への書き込みを許可します +1. "Overwrite file(s)"を選択します + たくさんのDSiWareゲームがインストールされている場合この作業には少し時間がかかることがあります -1. Press (B) to decline relocking write permissions if prompted -1. Press (B) twice to return to the main menu +1. Nandへの書き込みのロックを求められた場合、(B) ボタンを押して拒否してください。 +1. Bキーを二回押してメインメニューに戻ります。 -#### Section VI - Restore GBA VC Saves +#### セクション VI - GBA VCセーブのリストア -If you did not backup GBA VC Saves earlier, skip this section. +GBA VCセーブを持っていない場合、このセクションを無視してください。 {: .notice--info} -To identify a `.gbavc.sav` file's Title ID, you can get a listing of all games on the system and their corresponding Title IDs by holding (R) and pressing (A) on the GodeMode9 main menu, then selecting "Search for titles". +`.gbavc.sav`ファイルのタイトルIDを特定するには`[A:] SYSNAND SD`で (R) を押しながら(A)を押すことでGodMode9メインメニューから "Search for titles" を呼び出せます {: .notice--info} -1. Hold (R) and press (Start) at the same time to power off your device -1. Power on your device into SysNAND -1. Do the following process for each GBA VC game that you want to restore the save for: - + Launch the GBA VC game - + Exit the GBA VC game - + Boot your device while holding (Start) to launch the Luma3DS chainloader menu - + Launch GodMode9 by pressing (A) - + Navigate to `[0:] SDCARD` -> `gm9` - + Press (Y) on the `.gbavc.sav` file you wish to restore to copy it - + Press (B) to return to the main menu - + Navigate to `[S:] SYSNAND VIRTUAL` - + Press (A) on `agbsave.bin` to select it - + Select "AGBSAVE options..." - + Select "Inject GBA VC save" - + Press (A) to continue - + Press (Start) to reboot your device - + Launch the GBA VC game - + Exit the GBA VC game -1. Launch GodMode9 by holding (Start) during boot +1. (R) を押したまま(Start) を押し、電源を切ります +1. SysNANDでデバイスを起動します +1. セーブを元に戻すGBA VCゲームごとに以下の処理を行います: + + GBA VCゲームを起動します + + GBA VCゲームを終了します + + (Start) を押しながらluma3dsをブートしてチェインローダーメニューを起動します。 + + (A) ボタンで GodMode9 を呼び出します + + `[0:] SDCARD` -> `gm9`へ移動します。 + + (Y) を押し `.gbavc.sav` をリストアします + + (B) を押してメインメニューに戻ります + + `[S:] SYSNAND VIRTUAL`へ移動します + + `agbsave.bin` を(A)で選択します + + "AGBSAVE options..."を選択します + + "Inject GBA VC save"を選択します + + (A) ボタンで続行します + + STARTキーを押してデバイスを再起動します。 + + GBA VCゲームを起動します + + GBA VCゲームを終了します +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 -#### Section VII - Backup SysNAND +#### セクション VII - SysNANDのバックアップ -1. Press (Home) to bring up the action menu -1. Select "Scripts..." -1. Select "GM9Megascript" -1. Select "Backup Options" -1. Select "SysNAND Backup" +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します +1. "Backup Options"を選択します +1. "SysNAND Backup"を選択します 1. (A) で確認します - + This process will take some time - + If you get an error, make sure that you have at least 1.3GB of free space on your SD card + + この作業には少し時間がかかります + + エラーの場合は、SD カードに1.3GB以上の空き領域があることを確認してください。 1. (A) で続行します -1. Press (B) to return to the main menu -1. Select "Exit" -1. Press (A) to relock write permissions if prompted +1. Bキーを押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます 1. (R) を押したまま (B) を押してSDカードを取り外します 1. パソコンにSDカードを入れます -1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer - + Make backups in multiple locations (such as online file storage) - + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future -1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. SDカードの`/gm9/out/`フォルダから`__sysnand_###.bin`と`essential.exefs`をコンピュータの安全な場所にコピーしてください + オンラインストレージ等任意の場所にファイルのバックアップをするといいです。 + + これらのバックアップはブリックした場合に、NANDイメージからファイルを復元することができます。 +1. バックアップしたら、SDカードの`/gm9/out/`フォルダから`__sysnand_###.bin`と`__sysnand_###.bin.sha`を削除します。 1. **次のステップではSDカードに保存してあるファイルを全て削除しますので、SDカードのコンテンツをパソコンにバックアップします** -#### Section VIII - Format SD card +#### セクション VIII - SDカードのフォーマット -1. Reinsert your SD card into your device -1. Press (Home) to bring up the action menu -1. Select "More..." +1. SDカードをデバイスに再挿入します +1. (Home) ボタンを押してアクションメニューを呼び出します +1. 「More...」を選択します 1. 「SD format menu」を選択します 1. (A) を押して確認します 1. 「No EmuNAND」を選択します 1. 「Auto」を選択します -1. Press (A) to accept the label `GM9SD` - + Optionally, you may input a custom name for the SD card -1. When prompted, input the key combo given to confirm +1. (A) を押し、ラベルを`GM9SD`とします + + 必要に応じて、SDカードのカスタム名を入力することもできます +1. ヒントが出る時、表示されているキーコンボを入力し、確認します 1. (R) を押したまま (B) を押してSDカードを取り外します 1. パソコンにSDカードを入れます -1. Copy all your files back to your SD card - + Ensure you replace the `boot.firm` file on your SD card with the one from your backup -1. Reinsert your SD card into your device +1. すべてのファイルをSDカードにコピーします + + SDカード上の`boot.firm`ファイルをバックアップファイルで上書きしたことを確認してください +1. SDカードをデバイスに再挿入します 1. (A) を押してSDカードをマウントします -1. Press (Start) to reboot +1. (Start) を押して再起動します 1. ブラックスクリーンになってしまったら、[このトラブルシューティングガイドをご覧ください](troubleshooting#ts_sys_down) ___ -### Return to [Finalizing Setup](finalizing-setup). +### [セットアップを完了する](finalizing-setup) へ移動します {: .notice--primary} diff --git a/_pages/ja_JP/ntrboot.txt b/_pages/ja_JP/ntrboot.txt index 76f128345f..d35462c06a 100644 --- a/_pages/ja_JP/ntrboot.txt +++ b/_pages/ja_JP/ntrboot.txt @@ -2,91 +2,91 @@ title: "ntrboot" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -If your flashcart comes pre-flashed with ntrboot (or you have already flashed ntrboot to your flashcart), you can skip to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it. +フラッシュカードが ntrboot で事前にフラッシュされた場合 (または ntrboot をフラッシュ済み) [boot9strapのインストール (ntrboot)](installing-boot9strap-(ntrboot)) をスキップして使用方法を説明します。 {: .notice--success} -### Required Reading +### 必読事項 -Installing boot9strap with ntrboot requires a compatible NDS / DSi flashcart to flash ntrboot to. Note that some of these flashcarts are sold pre-flashed with ntrboot. +Ntrbootを使ってboot9strapをインストールするには互換性のあるNDSフラッシュカードが必要です。 これらのフラッシュカートのいくつかはntrbootを事前にフラッシュして販売されていることに注意してください。 -While the ntrboot exploit works independently of system version, the ntrboot flasher (which installs the exploit to the cart) is not. This means that, depending on the versions and devices supported by your flashcart, only certain methods may be available to you. +ntrbootエクスプロイトはシステムバージョンとは独立して動作しますが、ntrbootフラッシャー(カートにエクスプロイトをインストールします) はそうではありません。 つまり、フラッシュカードがサポートするバージョンやデバイスによっては、特定の方法しか利用できない場合があります。 -Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files when they detect that the system clock has passed a date determined by the flashcart firmware. One method to bypass this is to set the system clock to an earlier date. +「Time Bomb」があるカートは、起動できなくなる日付があることに注意してください。 システムクロックがフラッシュカードのファームウェアによって決定された日付に達したことを検出すると、.nds`ファイルが起動できなくなります。 これを避ける1つの方法は、システムクロックを以前の日付に設定することです。 -| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | +| フラシュカートの名前 | 現在の価格 | "Time Bomb"? | 3DS Versions? | DSi バージョン? | その他の注意事項 | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | -| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | -| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 2024 | <= 11. 4.0 | <= 1.4.5 | **ntrboot**であらかじめフラッシュされています。NDSフラッシュカートに戻すことができます。 | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | <= 11.14.0 | <= 1.4. | **comes pre-flashed with ntrboot** ([NDSを起動するモードとntrbootを起動するモードを切り替えるスイッチがあります]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); ntrboot で手動でフラッシュしないでください。 | +| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | <= 4.3.0 | <= 1.4.4 | | +| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None |[特定のフラッシュチップ](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) がntrbootと互換性があるただ一つのモデル。 | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | すべてのRTSリビジョンに互換性があります。 | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | すべてのR4iSDHC 20XXフラッシュカードは同じです。 2013年モデルは互換性がありません。 | +| [**R4iSDHC RTS LITE20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | すべてのR4iSDHC 20XXフラッシュカードは同じです。 2013年モデルは互換性がありません。 | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4. | **ntrboot** がプリフラッシュされています (ntrboot("3DS") とNDSモードを切り替えるための外部スイッチ) ntrbootで手動でフラッシュしないでください。 | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | R4iSDHC フラッシュカードはすべて同じです。 | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} -Ensure your flashcart is able to launch `.nds` files on your device before beginning. Some flashcarts may require firmware or "kernel" files to be copied to the flashcart SD card. Consult your specific flashcart's instructions for more information. +フラッシュカードがデバイスで `.nds` ファイルを起動できることを確認してください。 フラッシュカードによっては、ファームウェアまたはカーネルファイルをフラッシュカードのSDカードにコピーする必要がある場合があります。 詳細については、特定のフラッシュカートの手順を参照してください。 -Note that specific methods may have additional compatibility information. +特定のメソッドは追加の互換性情報を持つ可能性があることに注意してください。 -The usage of this exploit, regardless of flashing method, requires access to a small magnet if the target device is of a folding style (any 3DS family system that is not the old 2DS with a sleep switch). This is because the exploit requires your device to enter sleep mode while still having access to the buttons. +フラッシュ方法に関係なく、このエクスプロイトの使用 ターゲットデバイスが折りたたみ式(スリープスイッチを備えたold2DSではない3DSファミリシステム) の場合、小さな磁石が必要です。 このexploitでは、ボタンにアクセスしながらデバイスがスリープモードに入る必要があるためです. -To test if a magnet will work, hold it on or around the (A)(B)(X)(Y) buttons while the device is powered on to see if it triggers sleep mode. If it does, both displays will go black as long as the magnet is held in that spot. +磁石が動作するかどうかをテストするには デバイスの電源がオンになっている間、(A)(B)(X)(Y) ボタンの周りを押したままにして、スリープモードのトリガーを確認します。 その場合、磁石がその場所にある限り、両方のディスプレイは黒くなります。 {: .notice--info} -Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it (except for in the case of the Acekard 2i, which remains functional *on NDS and custom firmware 3DS systems only*). This means that, for most flashcarts, it will not even display on the home menu. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done. +ntrbootエクスプロイトがインストールされている間は、フラッシュカードは標準機能では使用できないことに注意してください(Acekard 2iの場合を除く)。 NDSとカスタムファームウェア3DSシステムのみ*で機能し続けます。 これは、ほとんどのフラッシュカートでは、ホームメニューにも表示されないことを意味します。 完了したら、ntrbootのインストール手順の最後にオプションの手順を実行して、フラッシュカードから削除する手順があります。 -Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/)) +稀ですが、フェイクのフラッシュカードを**文鎮化**する可能性があります。 起きることは稀ですが、リストされたフラッシュカードしか対応していません。 偽造されたカードを受け取る可能性を減らすためには、評判のいいサイトを利用することをおすすめします。(例えば[NDS Card](http://www.nds-card.com/)など) {: .notice--danger} ___ -### Methods +### 方法 ___ -#### Flashing ntrboot (3DS Single System) +#### ntrbootのフラッシュ (3DSシングルシステム) -This method requires nothing more than your stock unhacked 3DS and a compatible flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your 3DS. This means that your flashcart must support launching `.nds` files on your 3DS's version. See the flashcart table above for more information. +この方法は、改造されていない3DSと対応しているフラッシュカード以外の必要の物は必要ありません。 この方法は、フラッシュカードを使い、ntrbootフラッシャーが入っている`.nds`ファイルを実行します。 このことは、`.nds`を3DSで実行するのにフラッシュカードが対応していることが必要です。 詳細については、上記のflashcartの表を参照してください。 -Continue to [Flashing ntrboot (3DS Single System)](flashing-ntrboot-(3ds-single-system)) +[ntrbootのフラッシュ (3DSシングルシステム)](flashing-ntrboot-(3ds-single-system)) へ進んでください {: .notice--primary} ___ -#### Flashing ntrboot (3DS Multi System) +#### ntrbootのフラッシュ (3DSマルチシステム) -This method requires temporary access to a second 3DS family device that is already running boot9strap. This does not require your flashcart to support either 3DS's version. +この方法では、すでにboot9strapを実行している第2の3DSファミリデバイスにアクセスする必要があります。 フラッシュカードが3DSのいずれかのバージョンをサポートする必要はありません。 -Continue to [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) +[ntrbootのフラッシュ (3DSマルチシステム)](flashing-ntrboot-(3ds-multi-system)) へ進んでください {: .notice--primary} ___ -#### Flashing ntrboot (NDS) +#### ntrbootのフラッシュ (NDS) -This method requires temporary access to a Nintendo DS or Nintendo DS Lite that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your NDS. +この方法では、フラッシュカードと互換性のあるNintendoDSもしくはNintendoDS Liteにアクセスする必要があります。 この方法は、フラッシュカードを使い、ntrbootフラッシャーが入っている`.nds`ファイルをNDSにて実行します。 -Continue to [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) +[ntrbootのフラッシュ (NDS)](flashing-ntrboot-(nds)) へ進んでください {: .notice--primary} ___ -#### Flashing ntrboot (DSi) +#### ntrbootのフラッシュ (DSi) -This method requires temporary access to a Nintendo DSi that is compatible with your flashcart. This method uses the flashcart to run the ntrboot flasher `.nds` file on your DSi. This means that your flashcart must support launching `.nds` files on your DSi's version. See the flashcart table above for more information. +この方法では、フラッシュカードと互換性のあるNintendoDSiにアクセスする必要があります。 この方法は、フラッシュカードを使い、ntrbootフラッシャーが入っている`.nds`ファイルをDSiにて実行します。 このことは、`.nds`をDSiで実行するのにフラッシュカードが対応していることが必要です。 詳細については、上記のflashcartの表を参照してください。 -Continue to [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) +[ntrbootのフラッシュ (DSi)](flashing-ntrboot-(dsi)) へ進んでください {: .notice--primary} diff --git a/_pages/ja_JP/privacy-policy.txt b/_pages/ja_JP/privacy-policy.txt index c36506539b..2ae21281e8 100644 --- a/_pages/ja_JP/privacy-policy.txt +++ b/_pages/ja_JP/privacy-policy.txt @@ -1,30 +1,30 @@ --- -title: "Privacy Policy" # +title: "プライバシーポリシー" # layout: single-no-ads --- -### Cookies +### クッキー -This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily. +このサイトでは、ガイドの指示に従ってルーティングユーザーの改造を容易にするためにCookieを使用しています。 クッキーを使用すると、ページのサイドバーが現状の進行状況をサイトに表示し、ユーザーが手順をより簡単にナビゲートできるようになります。 -### Embedded Content From Other Websites +### 他のウェブサイトからの埋め込みコンテンツ -This site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves as if the user has visited the other website. +このサイトには埋め込まれたコンテンツが含まれている可能性があります (例: ビデオ、画像、記事など)。 他のウェブサイトからの埋め込みコンテンツは、ユーザーが他のウェブサイトにアクセスしたように動作します。 -These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website. +これらのウェブサイトは、お客様に関するデータを収集し、Cookieを使用し、追加のサードパーティのトラッキングを埋め込み、その埋め込みコンテンツとのやり取りを監視する場合があります。 アカウントを持っていて、そのウェブサイトにログインしている場合、埋め込まれたコンテンツとのやり取りを追跡することも含まれます。 -### Analytics +### 分析 -This site uses Google Analytics to monitor and analyze traffic. This site is hosted by Github Pages, which may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with this site. For more information about Github Pages as it relates to user privacy, see the [GitHub Privacy Statement](https://help.github.com/en/articles/github-privacy-statement). +このサイトでは、Googleアナリティクスを使用してトラフィックを監視し、分析しています。 このサイトはGithub Pagesによってホストされており、ユーザーに関するデータを収集し、Cookieを使用することがあります。 追加のサードパーティの追跡を埋め込み、このサイトとのやり取りを監視します。 Github Pages についての詳細は、[GitHub Privacy Statement](https://help.github.com/en/articles/github-privacy-statement)を参照してください。 -### Information Collected +### 収集された情報 -This site does not collect personal information. This site may collect usage information in order to analyze interest in content and to provide advertisers with information on an aggregate basis. No personally identifiable information is shared with third-party advertising companies. +このサイトは個人情報を収集しません。 本サイトでは、コンテンツに関心を分析し、広告主に総括的に情報を提供するために、利用情報を収集することがあります。 個人を特定できる情報は第三者の広告会社と共有されません。 -### Third-Party Websites +### サードパーティのウェブサイト -This site may link to other sites for users to use or reference. This site is not responsible for the privacy policies of other sites. Users should be aware that the privacy policies of other websites may differ from this one. +このサイトは、ユーザーが使用または参照するために他のサイトにリンクすることがあります。 このサイトは他のサイトのプライバシーポリシーには責任を負いません。 他のウェブサイトのプライバシーポリシーは、このポリシーと異なる場合があることにご注意ください。 -### Changes to Privacy Policy +### プライバシーポリシー への変更 -The contents of this Privacy Policy may be altered at any time and for any reason. +本プライバシーポリシーの内容は、何らかの理由でいつでも変更することがあります。 diff --git a/_pages/ja_JP/region-changing.txt b/_pages/ja_JP/region-changing.txt index 8af7483db8..20720de7f9 100644 --- a/_pages/ja_JP/region-changing.txt +++ b/_pages/ja_JP/region-changing.txt @@ -1,141 +1,166 @@ --- -title: "Region Changing" +title: "リージョンチェンジ" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -This is add-on section for region changing your CFW SysNAND. This is done by installing the 11.5.0 CTRTransfer image for the region you want to switch to. +このアドオンセクションは、CFW SysNANDをリージョンチェンジするためのガイドです。 これは、11.5.0 CTRTransferイメージをインストールすることでリージョンを変更します。 -Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases). +現在、Luma3DSはリージョンを問わずにゲームを実行でき、タイトル別の[地域のエミュレート](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features)に対応しているため、リージョンチェンジの需要はあまりありません。 また、地域外の言語のNDSゲームを実行するには[TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases)が必要です。 -To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). +このページの [マグネット](https://wikipedia.org/wiki/Magnet_URI_scheme) リンクを使用するには、[Deluge](http://dev.deluge-torrent.org/wiki/Download)のようなTorrentクライアントが必要です。 -Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. +SDカードの/luma/payloadsフォルダに +godmode9.firm以外のペイロードがある場合、 +起動時に (start) を長押しするとchainloaderメニューが表示されます。 +十字キーでgodmode9を選択して　(A) ボタンを押してください。 -地域を変更すると、既存のNNIDとの互換性がなくなるため、システムをNNIDとの関連は解除されます。 NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). +地域を変更すると、既存のNNIDとの互換性がなくなるため、システムをNNIDとの関連は解除されます。 NNIDは、デバイスの領域にロックされており、リージョン間を転送するには[非常に複雑で高度なプロセス](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt)が必要となります。 {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. もうオリジナル地域のeShopにアクセスしているNew 3DSは地域を変更した後、新しいNNIDを作成できず、新しい地域のeShopにもアクセスできません！ +このプロセスが終わると、**eShop**にアクセスできなくなります。 これには、ゲームのアップデート、DLCの購入、特定のゲームのオンラインプレイなど、NNIDを使用する機能が含まれます。 地域を元の地域に変更しても、通常この問題は解決されません。 {: .notice--warning} -でも、上記のeShopにアクセスできるデバイスでも、変更後にアクセスできなくなることがありますので、ご注意ください。 これは任天堂のサーバーに関する事情であり、筆者も制御できません。 Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). 原因はまだ不明です。 +でも、上記のeShopにアクセスできるデバイスでも、変更後にアクセスできなくなることがありますので、ご注意ください。 これは任天堂のサーバーに関する事情であり、筆者も制御できません。 さらに、eShopはデバイスでは機能しないことがあります (例えば一部のNew 3DS)。 原因はまだ不明です。 -Region changing using CTRTransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but Old 3DS users, for now, will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon) until they format their devices. +CTRTransferを使ってリージョンを変更すると再起動パッチが壊れてしまいます 原因は不明です。これによって、デバイスをフォーマットする前に、Old 3DSのユーザーは拡張メモリーモードを利用したゲーム (例えば、モンスターハンター、大乱闘スマッシュブラザーズ、またはポケモンサン/ムーン) を起動できなくなります。 -You MUST have already installed Luma3DS and boot9strap to use this. +これを使用するには、Luma3DSとboot9strapをインストールしている必要があります。 {: .notice--danger} -### What You Need +### 必要なもの -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)* -* The 11.5.0 CTRTransfer image for your device and the region that you want to change to: - + - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS or 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [New 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) +* v1.9.2pre1バージョンのの[GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* 最新版の [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.3dsx` file)* +* デバイスの11.5.0 CTRTransferイメージ、および変更先のリージョン: + + - [New 3DS または 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS または 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS または 2DS - 11.5.0 - KOR - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [New 3DS または 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2b0a71a2523328e447938fea7b4c02ebe0b72705&dn=11.5.0-38U_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) ~ - + - [Old 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [Old 3DS or 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) - + - [Old 3DS or 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS または 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:df0836a731778ab6ffe9a8c658400c782f0225cd&dn=11.5.0-38E_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS または 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + + - [Old 3DS または 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Create a folder named `cias` on the root of your SD card if it does not already exist -1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card -1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card**** -1. Copy the 11.5.0 CTRTransfer image `.bin` from the CTRTransfer `.zip` to the `/gm9/` folder on your SD card -1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device +1. SDカード直下に `3ds` フォルダがない場合、フォルダを作成します +1. SDカード直下に `cias` フォルダが存在しない場合、作成します。 +1. `GodMode9.firm` を GodMode9の `.zip` から取り出し、SDカードの `/luma/payloads/` フォルダにコピーします。 +1. `gm9`フォルダをGodMode9`.zip`からSDカードのルートにコピーします**** +1. 11.5.0 CTRTransferイメージの `.bin` を CTRTransferの `.zip` から取り出し、SDカードの `/gm9/` フォルダにコピーします +1. `FBI.3dsx`を、SDカードの`/3ds/`フォルダにコピーします。 +1. 再度、SDカードを本体に挿入してください。 -#### Section II - CTRTransfer - -1. Launch GodMode9 by holding (Start) during boot -1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed -1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue - + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide -1. Navigate to `[0:] SDCARD` -> `gm9` -1. Press (A) on the CTRTransfer `.bin` to select it -1. Select "CTRNAND options..." -1. Select "Transfer image to CTRNAND" -1. If prompted, select "Transfer to SysNAND" - + This prompt will only appear if you have an EmuNAND -1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given - + This process will take some time -1. Once the transfer has completed, press (A) to continue -1. Press (B) to decline relocking write permissions if prompted -1. Press (B) twice to return to the main menu -1. Press (Home) to bring up the action menu -1. Select "Scripts..." -1. Select "GM9Megascript" -1. Select "Scripts from Plailect's Guide" -1. Select "CTRTransfer Ticket Copy" -1. When prompted, press (A) to proceed +#### セクション II - NANDバックアップ +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. 重要なファイルのバックアップを作成するように求められたら、(A) ボタンを押して実行し、(A) ボタン を押して完了させてください。 +1. RTC日付/時刻を修正するには、(A) ボタンを押し、日付や時刻を設定してください。終わったら、(A) を押して続けてください。 + +補足 RTCの日付と時刻を修正する必要がある場合は、このガイドの後にシステム設定で時刻を同じように修正する必要があります +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します +1. "Backup Options"を選択します +1. "SysNAND Backup"を選択します +1. (A) で確認します + + この作業には少し時間がかかります + + エラーの場合は、SD カードに1.3GB以上の空き領域があることを確認してください。 1. (A) で続行します -1. Press (B) to return to the main menu -1. Select "Exit" -1. Press (A) to relock write permissions if prompted -1. Press (Start) to reboot your device -1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" - + Updates while using B9S + Luma (what you have) are safe +1. Bキーを押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます +1. (R) を押したまま (B) を押してSDカードを取り外します +1. パソコンにSDカードを入れます +1. SDカードの`/gm9/out/`フォルダから`__sysnand_###.bin`と`essential.exefs`をコンピュータの安全な場所にコピーしてください + オンラインストレージ等任意の場所にファイルのバックアップをするといいです。 + + これらのバックアップはブリックした場合に、NANDイメージからファイルを復元することができます。 +1. バックアップしたら、SDカードの`/gm9/out/`フォルダから`__sysnand_###.bin`と`__sysnand_###.bin.sha`を削除します。 +1. 再度、SDカードを本体に挿入してください。 + + SDカードが検出されなかった場合は、 (R) と (B) を同時に押して再取り付けします + +#### セクション III - CTRTransfer + +1. `[0:] SDCARD` -> `gm9`へ移動します。 +1. CTRTransfer `.bin` を選択して、 (A) ボタンを押します +1. "CTRNAND options..." を選択、決定します +1. "Transfer image to CTRNAND" を選択、決定します +1. メッセージが表示されたら、 "Transfer to SysNAND" を選択、決定します + + お使いのSDカードにEmuNANDが存在する場合のみ表示されます。 EmuNANDからのデータ移行を行う場合、上記の操作を行ってください。 +1. Aキーを押してSysNANDへの書き込み権限を解除して表示されているキーコンボを入力します + + この作業には少し時間がかかります +1. 作業が完了したらAボタンを押して続行します +1. Nandへの書き込みのロックを求められた場合、(B) ボタンを押して拒否してください。 +1. Bキーを二回押してメインメニューに戻ります。 +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します +1. "Scripts from Plailect's Guide"を選択します +1. "CTRTransfer Ticket Copy"を選択します +1. メッセージが表示されたら、(A) ボタンを押して続行します +1. (A) で続行します +1. Bキーを押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます +1. STARTキーを押してデバイスを再起動します +1. 本体設定→その他の設定から一番右のページに移動して本体の更新からデバイスをアップデートします + + (現在あなたが使用している) B9S + Luma を使用している状態での本体更新は安全です + エラーが発生すれば、DNS設定を「自動」に変更してください -#### Section III - Launching FBI +#### セクション IV - FBIを起動 -1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) -1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Launch the Download Play application -1. Your device should load the Homebrew Launcher +1. ダウンロードプレイアプリケーションを開きます (この[アイコン]({{ "/images/download-play-icon.png" | absolute_url }}) +1. L+↓+SelectでRosalinaメニューを開きます。 +1. "Miscellaneous options​"を選びます。 +1. "Switch the hb. title to the current app."を選びます。 +1. (B) ボタンで続行します +1. (B) を押してRosalinaメインメニューに戻ります +1. (B) を押してRosalinaメインメニューを終了します。 +1. Homeボタンを押しダウンロードプレイを閉じます。 +1. 再度ダウンロードプレイアプリを開きます。 +1. デバイスでHomebrew Launcherが起動されます -#### Section IV - Reinstalling Tickets +#### セクション V - チケットを再インストールする -If script found no user tickets told you to skip this section, then skip this section +スクリプトがユーザーチケットを見つけなかった場合は、このセクションをスキップしてください。 {: .notice--info} -1. Launch FBI from the list of homebrew -1. Navigate to `SD` -> `cias` -1. Return to the SD directory with (B) -1. Select "gm9" -1. Select "out" -1. Select "ctrtransfer_tickets" -1. Do the following process for either the `eshop` folder, `unknown` folder, or both - + Navigate to the folder - + Select "\" - + Select "Install and delete all tickets" - + Wait. システムはフリーズすることがあります。 - + Press (A) to confirm - + Press (B) to decline installing tickets from CDN. -1. Press (Home) to exit FBI +1. HomebrewメニューからFBIを起動します。 +1. SDカードのciasフォルダに移動します +1. (B) を押して、SDディレクトリに戻ります +1. "gm9out" を選択します +1. 「out」を選択します +1. 「Ctrtransfer_tickets」を選択します +1. 次の操作を `eshop` フォルダと `unknown` フォルダのいずれか、または両方に対して行います + + フォルダに移動します + + "\" を選択します + + "Install and delete all tickets" を選択します + + しばらく待ちます。 システムはフリーズすることがあります。 + (A) で確定します + + (B) を押してCDNからチケットをインストールしないようにします +1. ホームボタンを押してFBIを終了します -#### Section V - Region settings +#### セクション VI - 地域の設定 -1. Launch the System Settings +1. 本体設定を起動します 1. 「その他の設定」に行って、「ユーザー情報」に行って、「地域情報」に行きます 1. 変更先の地域の国を選択します 1. ヒントが出るときでも、州を選択する必要がありません -#### Section VI - Remove CTRTransfer image +#### セクション VII - CTRTransferイメージを削除 -1. Launch GodMode9 by holding (Start) during boot -1. Navigate to `[0:] SDCARD` -> `gm9` -1. Press (X) on the CTRTransfer image `.bin` to delete it -1. (A) で確認します -1. Press (Start) to reboot your device +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. `[0:] SDCARD` -> `gm9`へ移動します。 +1. 拡張子.binのCTR Transferイメージの上でXキーを押して削除します +1. (A) を押して確認します +1. STARTキーを押してデバイスを再起動します ___ -Old 3DSs and 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). +Old 3DSまたは2DSは拡張メモリーモードを使用するゲーム (例えば、モンスターハンター、大乱闘スマッシュブラザーズおよびポケモンサン・ムーン) をプレイするには、TinyFormatまたは本体設定でデバイスを初期化しなければならないことがあります。 {: .notice--info} diff --git a/_pages/ja_JP/restoring-cfw.txt b/_pages/ja_JP/restoring-cfw.txt new file mode 100644 index 0000000000..48eb48db58 --- /dev/null +++ b/_pages/ja_JP/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="目次" %} + +### 必読事項 + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### 必要なもの +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) + +### 手順 + +#### セクション I - 準備 + +1. パソコンにSDカードを入れます +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。 +1. 再度、SDカードを本体に挿入してください。 + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. (A) ボタン とD-Padを使用し、次の設定を有効にします: + * **"Show NAND or user string in System Settings"** +1. (Start) を押してセーブして再起動します + +___ + +[セットアップを完了する](finalizing-setup) へ進みます +{: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/seedminer.txt b/_pages/ja_JP/seedminer.txt index 58c8f39653..3c8be04712 100644 --- a/_pages/ja_JP/seedminer.txt +++ b/_pages/ja_JP/seedminer.txt @@ -2,93 +2,82 @@ title: "Seedminer" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +Seedminerベースのメソッドは、より簡単で安全なメソッドに置き換えられました。 このページの手順に従う理由がない場合は、[始める](get-started) に戻ってください(例えば、L/Rボタンが壊れているなど)。 +{: .notice--warning} -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +### 必読事項 -To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). +To install boot9strap on your device, we derive your device's unique encryption key. -If this key were completely random, the encryption key would be impossible to break on current computing hardware. Fortunately, the first half of the key (`movable_part1.sed`) is actually mathematically related to your device's Friend Code, allowing us to break the encryption. For information on how Seedminer works, please see [this presentation](https://zoogie.github.io/web/34⅕c3). +それを実現するために、Seedminerと呼ばれるツールを使用して、3DS内のDSiWare暗号化キー (`movable.sed`) を計算します。 次に、このDSiWare暗号化キーを使用して互換性のあるDSiWareアプリケーションを復号化し、脆弱性を利用して私達が使用するコードを挿入し実行します(デバイスで利用する脆弱性は国によって異なります)。 -This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method. +もしこのキーが完全にランダムなものであれば、現在のコンピューターで暗号化キーを破ることは不可能です。 しかし幸いにも、キー (`movable_part1.sed`) の前半部分については3DSのフレンドコードが関連しているため、暗号化を破ることが可能です。 Seedminerの仕組み自体については、こちらの[資料](https://zoogie.github.io/web/34⅕c3)を参照してください。 -### Instructions +この方法には、必要な計算を強力なグラフィックボードで行う必要があります。 この方法であなたを支援するために、ボランティアがWebサイトを運営し支援しています。 -#### Section I - Compatibility Test +### 手順 -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### セクション I - 準備 1. パソコンにSDカードを入れます -1. Navigate to the `Nintendo 3DS` folder on your SD card -1. Copy the 32 character long name of the folder you see inside Nintendo 3DS - + Do not go inside any more folders - + If you see multiple folders with long, random names inside `Nintendo 3DS` without opening any other folders, perform the following: - + Rename the `Nintendo 3DS` folder to `BACKUP_Nintendo 3DS` - + Reinsert your SD card into your device and power on your device - + Wait for the device to generate the SD card data - + Power off your device and reinsert your SD card into your computer - + Navigate to the `Nintendo 3DS` folder on your SD card - + Copy the 32 character long name of the folder you see - + Delete the `Nintendo 3DS` folder - + Rename the `BACKUP_Nintendo 3DS` folder to `Nintendo 3DS` -1. Paste your 32 character long folder name into a document you can reference later - + This folder name is also known as your "ID0" -1. Power on your device -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Find your Mii profile, then find the "Friend Code" field on the top screen +1. SDカードにある、`Nintendo 3DS` フォルダを開きます。 +1. 表示されている32文字のフォルダ名をコピーします。 + + まだそれ以上フォルダを展開しないでください + + 他のフォルダを開かずに、長い名前のフォルダが複数ある場合は以下の手順を行ってください。 + + `Nintendo 3DS` というフォルダ名を `BACKUP_Nintendo 3DS` というフォルダ名に変更する。 + + SDカードを3DSに挿入し電源を入れます。 + + デバイスがSDカードにデータを構築し終わるまで待ちます。 + + 3DSの電源を切り、SDカードをパソコンに挿入します。 + + SDカードにある、 `Nintendo 3DS` フォルダを開きます。 + + 表示されている32文字のフォルダ名をコピーします。 + + `Nintendo 3DS` フォルダを削除します。 + + さきほどリネームした `BACKUP_Nintendo 3DS` フォルダ名を `Nintendo 3DS` に戻します。 +1. コピーした32文字のフォルダ名を、後で分かるようにメモ帳などに貼り付けます。 + + このフォルダ名のことを一般に "ID0" と呼称します。 +1. デバイスの電源を入れます +1. ホームメニュー上部のフレンドリスト ( [オレンジ色の顔アイコン]({{ "/images/friend-list-icon.png" | absolute_url }}) を開きます) + + もしここでエラーが発生し、メニューから追い出された場合、新しいMiiを作成する必要があります。あるいはあなたの3DSは任天堂サーバーにアクセスできない状態です(Banされている、または接続自体の問題)。 +1. 自分のMiiを探し、"フレンドコード"をトップ画面に表示します。 -#### Section III - Seedminer +#### セクション II - Seedminer -1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer - + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field -1. Paste your device's 32 character long folder name into the "Your ID0" field - + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section -1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. -1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console -1. Wait for the site to update - + If it does not, wait a few minutes before refreshing the page once -1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button -1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. - + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. When the process has completed, download your `movable.sed` file from the site - + Keep this file as you will need it in the upcoming pages +1. パソコンから、 [Bruteforce Movable](https://seedminer.hacks.guide/) を開きます。 + + このサイトは、 `movable_part1.sed` の検索を(ボット3DS機器を使用して)自動化し、(Seedminerを実行しているボランティアのPCを使用して) 3DSのDSiWareの暗号化を解除することが可能です。 + + サイトが動作しない場合は、["Nintendo Homebrew"というディスコード](https://discord.gg/MWxPgEp) に参加して、誰かに(英語で)助けてもらいましょう。 +1. "Your friend code" 欄に、あなたのフレンドコードを (空白やハイフン抜きで) 入力します。 +1. 「Your ID0」 欄に、あなたのデバイスにあった32文字の 「ID0」 をコピペします。 + + 手動で入力するのは止めてください。 前のセクションで保存した場所から「ID0」をコピー＆ペーストし、ID0 が正しく入力されていることを確認してください。 +1. 「Go」を選択します。 + + サイトがすぐにステップ4に移動した場合は、`movable.sed`ファイルをダウンロードして次のセクションに進んでください +1. サイト上にボット用フレンドコードが表示されたら、3DS本体の『フレンドの登録』≫『インターネットでフレンド登録』へ進み、サイト上に表示された「ボット用フレンドコード」を3DSに登録してください。 +1. サイト側が更新されるまで待ちます。 + + もし変わらない場合、数分待ってからページを１度更新し直します。 +1. サイトがあなたの情報を処理すると、 "Continue" または "Do another device" という選択肢が表示されます。 緑色の "Continue" ボタンをクリックします。 +1. 残りの処理が完了するまで待ちます。 + + 通常は速い　(1-5分) ですが、場合によっては30分ほどかかることがあります。 + + このプロセスでは、追加したボットが3DSに表示されない場合があります。 Webサイトが更新されていれば問題ありません。 + + もし３０分経過しても変わらない場合は、Discordで [Nintendo Homebrewというコミュニティ](https://discord.gg/MWxPgEp) に (英語で) 誰かに支援を呼びかけてください。 +1. すべての処理が完了したら、サイトから `movable.sed` ファイルをダウンロードしてください。 + + このファイルは今後必要になるので、保管してください ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/ja_JP/site-navigation.txt b/_pages/ja_JP/site-navigation.txt index f3204b8523..1da36bec48 100644 --- a/_pages/ja_JP/site-navigation.txt +++ b/_pages/ja_JP/site-navigation.txt @@ -1,5 +1,5 @@ --- -title: "Site Navigation" # +title: "サイトマップ" # layout: single-no-ads sitemap: false --- @@ -7,59 +7,65 @@ sitemap: false {% capture notice-1 %} **人気のあるページ** -+ [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher（Soundhax）](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [セットアップを完了する](finalizing-setup) ++ [boot9strapの導入 (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [boot9strapの導入 (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [boot9strapのインストール (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
{% capture notice-2 %} **すべてのページ** -+ [A9LH to B9S](a9lh-to-b9s) ++ [A9LHからB9S](a9lh-to-b9s) + [BannerBomb3](bannerbomb3) -+ [Cartridge Update](cart-update) ++ [Cartridgeの更新](cart-update) + [クレジット](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [寄付](donations) + [F3（Linux）](f3-(linux)) + [F3X（Mac）](f3x-(mac)) + [よくある質問](faq) -+ [File Extensions (Windows)](file-extensions-(windows)) -+ [Finalizing Setup](finalizing-setup) -+ [Flashing ntrboot (3DS Single System)](flashing-ntrboot-(3ds-single-system)) -+ [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) -+ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) -+ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [ファイル拡張子 (Windows)](file-extensions-(windows)) ++ [セットアップを完了する](finalizing-setup) ++ [ntrbootのフラッシュ (3DSシングルシステム)](flashing-ntrboot-(3ds-single-system)) ++ [ntrbootのフラッシュ (3DSマルチシステム)](flashing-ntrboot-(3ds-multi-system)) ++ [ntrbootのフラッシュ (DSi)](flashing-ntrboot-(dsi)) ++ [ntrbootのフラッシュ (NDS)](flashing-ntrboot-(nds)) ++ [SDカードのフォーマット (Linux)](formatting-sd-(linux)) ++ [SDカードのフォーマット(Mac)](formatting-sd-(mac)) ++ [SDカードのフォーマット (Windows)](formatting-sd-(windows)) + [はじめる](get-started) -+ [GodMode9 Usage](godmode9-usage) ++ [はじめる (New 3DS)](get-started-(new-3ds)) ++ [はじめる (Old 3DS)](get-started-(old-3ds)) ++ [GodMode9の使用方法](godmode9-usage) + [H2testw（Windows）](h2testw-(windows)) + [ホームページ](/) + [Homebrew Launcher（その他の方法）](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher（Soundhax）](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) -+ [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) -+ [Installing boot9strap (Browser)](installing-boot9strap-(browser)) -+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool)) -+ [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) -+ [Installing boot9strap (MSET)](installing-boot9strap-(mset)) -+ [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) -+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) -+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [boot9strapの導入 (2xrsa)](installing-boot9strap-(2xrsa)) ++ [boot9strapの導入 (ブラウザ)](installing-boot9strap-(browser)) ++ [boot9strapの導入 (Fredtool)](installing-boot9strap-(fredtool)) ++ [boot9strapの導入 (Frogtool)](installing-boot9strap-(frogtool)) ++ [boot9strapの導入 (Hardmod)](installing-boot9strap-(hardmod)) ++ [boot9strapの導入 (MSET)](installing-boot9strap-(mset)) ++ [boot9strapの導入 (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) ++ [boot9strapの導入 (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [boot9strapの導入 (safecerthax)](installing-boot9strap-(safecerthax)) ++ [boot9strapの導入 (Soundhax)](installing-boot9strap-(soundhax)) ++ [boot9strapの導入 (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [boot9strapの導入 (USM)](installing-boot9strap-(usm)) + [EmuNANDを移動する](move-emunand) + [ntrboot](ntrboot) + [地域変更](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [トラブルシューティング](troubleshooting) -+ [Uninstall CFW](uninstall-cfw) -+ [Updating B9S](updating-b9s) ++ [CFWをアンインストールする](uninstall-cfw) ++ [B9Sを更新する](updating-b9s) {% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/ja_JP/troubleshooting.txt b/_pages/ja_JP/troubleshooting.txt index 21b6f17772..69250c1853 100644 --- a/_pages/ja_JP/troubleshooting.txt +++ b/_pages/ja_JP/troubleshooting.txt @@ -2,49 +2,52 @@ title: "Troubleshooting" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 -If you are unable to boot your device, please look for the section relevant to you and follow the instructions. +3DSを起動できない場合、その問題に関連するセクションをお調べください。 -If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried. +問題がどうしても解決できなくてサポートが必要な場合は、SDカードのルートにある.logファイルを[Gist](https://gist.github.com/)へ、問題の詳細と試みた解決策と一緒に送信してください。 -Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. +SDカードの/luma/payloadsフォルダに +godmode9.firm以外のペイロードがある場合、 +起動時に (start) を長押しするとchainloaderメニューが表示されます。 +十字キーでgodmode9を選択して　(A) ボタンを押してください。 -To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download). +このページの [マグネット](https://wikipedia.org/wiki/Magnet_URI_scheme) リンクを使用するには、[Deluge](http://dev.deluge-torrent.org/wiki/Download)のようなTorrentクライアントが必要です。 -## DSi / DS functionality is broken after completing the guide +## DSi / DS機能がガイドを完成したあと機能しなくなりました -### What You Need +### 必要なもの -* The latest release of [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) *(the .3dsx file)* +* 最新版の [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) *(the `.3dsx` file)* -### Instructions +### 手順 -#### Section I - Prep Work +#### セクション I - 準備 -1. Power off your device +1. デバイスの電源を切ります 1. パソコンにSDカードを入れます -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `TWLFix-CFW.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device +1. SDカードの直下に`3ds`フォルダがない場合、そのフォルダを作成します +1. `TWLFix-CFW.3dsx`をSDカードの`/3ds/`フォルダにコピーします +1. 再度、SDカードを本体に挿入してください。 -#### Section II - Fixing TWL +#### セクション II - TWL の修正 -1. Open the Homebrew Launcher -1. Launch TWLFix-CFW from the list of homebrew -1. Press (A) to uninstall the broken TWL titles -1. Press (Start) to reboot the device -1. Perform a System Update by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" - + The update will see that the essential TWL titles have been uninstalled, and will redownload and reinstall them -1. Once the update is complete, tap "OK" to reboot the device +1. Homebrew Launcherを開く +1. HomebrewリストからTWLFix-CFWを起動します +1. (A) を押して壊れたTWLタイトルをアンインストールします +1. (Start) ボタンを押して本体を再起動します +1. システム設定に移動してシステム更新を実行し、次に「その他の設定」を選択し、「システムアップデート」を使用して右に進みます。 + + 必須のTWLタイトルがアンインストールされ、再インストールされます。 +1. アップデートが完了したら、「OK」をタップして端末を再起動します -## Cannot inject H&S on Gateway downgraded device +## Gatewayでダウングレードしたデバイスでは「安全に使用するために」アプリをインジェクトできない -This is caused by Gateway implementing a very shoddy downgrade method which leaves two versions of each app on the system. One of them is unused, but it confuses the H&S inject system, causing it to inject into the wrong one. +その原因は、Gatewayのダウングレード方法に大きな不具合があって、システムにアプリそれぞれ二つのバージョンを残してしまったことにあります。 そのうちの1つは未使用ですが、「安全に使用するために」インジェクションシステムが混乱し、誤って未使用へインジェクトしています。 -1. Launch GodMode9 by holding (Start) during boot +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 1. Navigate to `[1:] SYSNAND CTRNAND` -> `title` -> `00040010` 1. ご使用のデバイスのモデルと地域によって、正しいフォルダに移動します + **Old 3DS or Old 2DS EUR**: `00022300` -> `content` @@ -56,15 +59,15 @@ This is caused by Gateway implementing a very shoddy downgrade method which leav 1. ここでは二つのappとtmdファイルのタイプがあります。一つのタイプは大文字の拡張子（`.TMD`と`.APP`）を持ちます。もう一つのタイプは小文字の拡張子（`.tmd`と`.app`）。注意します 1. (R) を押したまま (Y) を押して新しいディレクトリを作成します 1. Press (A) to confirm the name `newdir` (it does not matter what the folder is called) -1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given -1. Press (B) to decline relocking write permissions if prompted +1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl1) への書き込みを許可します +1. NANDへの書き込みのロックを求められた場合、(B) ボタンを押して拒否してください。 1. 拡張子が大文字であるファイルそれぞれ (L) を押してマークします 1. (Y) を押してコピーします 1. `newdir`に移動します 1. (Y) を押してファイルを貼り付けます 1. 「Move path(s)」を選択します 1. 拡張子が大文字であるファイルは、すべて`newdir`ディレクトリに移動されます -1. Press (Start) to reboot your device +1. (Start) ボタンを押して本体を再起動します 1. Retry the H&S injection 1. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then retry the H&S injection @@ -79,37 +82,37 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras ## Black screen on SysNAND boot 1. Try booting with your SD card out, and then reinserting it after booting - 1. Power off your device + 1. 本体の電源を切ります。 1. Remove your SD card from your device - 1. Power on your device + 1. デバイスの電源を入れます 1. When the home menu appears, reinsert your SD card into your device 1. If this worked, you should clear Home Menu's extdata by following these instructions: - 1. Power off your device - 1. Launch GodMode9 by holding (Start) during boot - 1. Press (Home) to bring up the action menu - 1. Select "Scripts..." - 1. Select "GM9Megascript" - 1. Select "Scripts from Plailect's Guide" + 1. 本体の電源を切ります。 + 1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 + 1. (Home) ボタンを押してアクションメニューを呼び出します + 1. "Scripts..."を選択します + 1. "GM9Megascript"を選択します + 1. "Scripts from Plailect's Guide"を選択します 1. Select "Remove extdata" 1. (A) で続行します - 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given + 1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl1) への書き込みを許可します 1. (A) で続行します - 1. Press (B) to return to the main menu - 1. Select "Exit" - 1. Press (A) to relock write permissions if prompted - 1. Press (Start) to reboot your device + 1. Bキーを押してメインメニューに戻ります + 1. "Exit"を選択します。 + 1. (A) ボタンを押すとNANDへの書き込みを再ロックできます + 1. (Start) ボタンを押して本体を再起動します 1. ゲームカード（フラッシュカードを含む）を外したまま起動してみます 1. If you have a hardmod and a NAND backup, flash the backup back to SysNAND 1. Try booting into recovery mode and updating your system - 1. Power off your device + 1. 本体の電源を切ります。 1. Hold (L) + (R) + (A) + (Up) - 1. Power on your device + 1. デバイスの電源を入れます 1. If you enter safe mode, update your device 1. Your device may be bricked. For support (in English), join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) ## Clear Home Menu extdata -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます 1. Navigate to the `/Nintendo 3DS/<32-character-id>/<32-character-id>/extdata/00000000/` folder on your SD card 1. Delete the extdata file corresponding to your region: @@ -119,7 +122,7 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras + **CHN Region**: `000000A1` + **KOR Region**: `000000A9` + **TWN Region**: `000000B1` -1. Reinsert your SD card into your device +1. 再度、SDカードを本体に挿入してください。 ## Black screen on SysNAND boot after Installing boot9strap @@ -131,20 +134,20 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras 1. Test booting GodMode9 1. Luma3DSでは、起動時に (Start) を長押しします 1. Try deleting home menu's extdata by following these instructions: - 1. Power off your device - 1. Launch GodMode9 by holding (Start) during boot - 1. Press (Home) to bring up the action menu - 1. Select "Scripts..." - 1. Select "GM9Megascript" - 1. Select "Scripts from Plailect's Guide" + 1. 本体の電源を切ります。 + 1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 + 1. (Home) ボタンを押してアクションメニューを呼び出します + 1. "Scripts..."を選択します + 1. "GM9Megascript"を選択します + 1. "Scripts from Plailect's Guide"を選択します 1. Select "Remove extdata" 1. (A) で続行します - 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given + 1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl1) への書き込みを許可します 1. (A) で続行します - 1. Press (B) to return to the main menu - 1. Select "Exit" - 1. Press (A) to relock write permissions if prompted - 1. Press (Start) to reboot your device + 1. Bキーを押してメインメニューに戻ります + 1. "Exit"を選択します。 + 1. (A) ボタンを押すとNANDへの書き込みを再ロックできます + 1. (Start) ボタンを押して本体を再起動します 1. ゲームカード（フラッシュカードを含む）を外したまま起動してみます 1. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version 1. Try following [CTRTransfer](ctrtransfer) diff --git a/_pages/ja_JP/uninstall-cfw.txt b/_pages/ja_JP/uninstall-cfw.txt index d6b84c3f3b..ac046a1a2b 100644 --- a/_pages/ja_JP/uninstall-cfw.txt +++ b/_pages/ja_JP/uninstall-cfw.txt @@ -2,9 +2,9 @@ title: "Uninstall CFW" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 This will completely remove CFW from your device, including Boot9Strap and Luma3DS, for the purpose of restoring the device to stock. @@ -18,25 +18,28 @@ This will not affect your NNID, any legitimately purchased games, or any saves f If you have modified critical system software (such as editing the home menu, unbanning your console, etc), uninstalling CFW may BRICK your device! {: .notice--danger} -Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. +SDカードの/luma/payloadsフォルダに +godmode9.firm以外のペイロードがある場合、 +起動時に (start) を長押しするとchainloaderメニューが表示されます。 +十字キーでgodmode9を選択して　(A) ボタンを押してください。 -### What You Need +### 必要なもの -* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* v1.9.2pre1バージョンのの[GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -### Instructions +### 手順 #### Section I - Safety Test -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card -1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card -1. Reinsert your SD card into your device -1. Launch GodMode9 by holding (Start) during boot +1. `GodMode9.firm` を GodMode9の `.zip` から取り出し、SDカードの `/luma/payloads/` フォルダにコピーします。 +1. `gm9`フォルダをGodMode9`.zip`からSDカードのルートにコピーします。 +1. 再度、SDカードを本体に挿入してください。 +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed -1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue - + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. RTC日付/時刻を修正するには、(A) ボタンを押し、日付や時刻を設定してください。終わったら、(A) を押して続けてください。 + +補足 RTCの日付と時刻を修正する必要がある場合は、このガイドの後にシステム設定で時刻を同じように修正する必要があります 1. Navigate to `[1:] SYSNAND CTRNAND > title > 00040138 > (X)0000002 > content` + On a "New" edition console, the (X) will instead be 2 + On an "Old" edition console, the (X) will instead be 0 @@ -51,9 +54,9 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma 1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -#### Section II - Prep Work +####セクションⅡ－準備 -1. Power on your device +1. デバイスの電源を入れます 1. Navigate to System Settings > Data Management > Nintendo 3DS > Software 1. In this list of software, delete any non-Nintendo content you installed while using CFW + This includes common system software such as FBI, Anemone3DS, Luma Updater, Homebrew Launcher, Checkpoint, and others, along with any non-eShop games @@ -61,23 +64,23 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma 1. In this list of software, delete any non-Nintendo content you installed while using CFW + This includes software such as TWiLightMenu++, along with any non-eShop games + Failure to remove all CFW software from both the 3DS and DSiWare sections before uninstalling CFW may prevent or disable access to the Data Management menu after uninstalling CFW -1. Power off your device +1. 本体の電源を切ります。 #### Section III - Running Uninstall Script -1. Launch GodMode9 by holding (Start) during boot -1. Press (Home) to bring up the action menu -1. Select "Scripts..." -1. Select "GM9Megascript" +1. (START)ボタンを押しながらデバイスを起動させ、GodMode9を起動します。 +1. (Home) ボタンを押してアクションメニューを呼び出します +1. "Scripts..."を選択します +1. "GM9Megascript"を選択します 1. Select "Hax Options" 1. Select "Un-install Hax" -1. When prompted, press (A) to proceed -1. Press (A) to unlock SysNAND (lvl3) writing, then input the key combo given +1. メッセージが表示されたら、(A) ボタンを押して続行します +1. (A) ボタンを押し、表示されるコンボを入力することで、 SysNAND (lvl3) への書き込みを許可します 1. (A) で続行します -1. Press (B) to return to the main menu -1. Select "Exit" -1. Press (A) to relock write permissions if prompted -1. Press (Start) to reboot your device +1. Bキーを押してメインメニューに戻ります +1. "Exit"を選択します。 +1. (A) ボタンを押すとNANDへの書き込みを再ロックできます +1. (Start) ボタンを押して本体を再起動します ___ diff --git a/_pages/ja_JP/updating-b9s.txt b/_pages/ja_JP/updating-b9s.txt index 602a07420f..f2bb97749e 100644 --- a/_pages/ja_JP/updating-b9s.txt +++ b/_pages/ja_JP/updating-b9s.txt @@ -2,76 +2,61 @@ title: "Updating B9S" --- -{% include toc title="Table of Contents" %} +{% include toc title="目次" %} -### Required Reading +### 必読事項 This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: +私たちは、カスタムファームウェアはオンラインで使用しても安全であると信じていますが、 過去には、主に不正行為や疑わしいeShopの行動のために、オンラインネットワークが禁止された事例もあります。 +{: .notice--warning} -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List +### 必要なもの -{% endcapture %} +* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) * +* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/) -
{{ notice-1 | markdownify }}
+### 手順 -### What You Need - -* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) - -### Instructions - -#### Section I - Prep Work +#### セクション I - 準備 For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. パソコンにSDカードを入れます -1. Copy `boot.3dsx` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。 +1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card -1. Reinsert your SD card into your device +1. 再度、SDカードを本体に挿入してください。 -#### Section II - Installing boot9strap +#### セクション II - boot9strapをインストールする 1. Launch Luma3DS chainloader menu by holding (Start) during boot 1. Launch SafeB9SInstaller by pressing (A) -1. Wait for all safety checks to complete -1. When prompted, input the key combo given to install boot9strap +1. すべてのセーフティチェックが完了するまで待ちます +1. プロンプトが表示されたら、boot9strapをインストールするために与えられたキーコンボを入力します。 1. Once it has completed, hold (Start) while pressing (A) to reboot your device to the Luma3DS chainloader + If you encounter an `argc = 0` error booting your device after the B9S update, just continue to fix it #### Section III - Update Luma3DS -1. Power off your device +1. 本体の電源を切ります。 1. パソコンにSDカードを入れます -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file -1. Reinsert your SD card into your device -1. Power on your device +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. 再度、SDカードを本体に挿入してください。 +1. デバイスの電源を入れます -#### Section IV - Configuring Luma3DS +#### セクション IV - Luma3DSを設定する This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot. {: .notice--info} -1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following: +1. Luma3DSの設定メニューで、(A) ボタンと十字ボタンを使用して以下をオンにします: + **「Show NAND or user string in System Settings」** 1. (Start) を押してセーブして再起動します ___ -### Continue to [Finalizing Setup](finalizing-setup) +[セットアップを完了する](finalizing-setup) へ進みます {: .notice--primary} diff --git a/_pages/ko_KR/a9lh-to-b9s.txt b/_pages/ko_KR/a9lh-to-b9s.txt index 19e400daa5..818f4b09ac 100644 --- a/_pages/ko_KR/a9lh-to-b9s.txt +++ b/_pages/ko_KR/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/ko_KR/bannerbomb3.txt b/_pages/ko_KR/bannerbomb3.txt index 461909efa5..a8dcb62ee4 100644 --- a/_pages/ko_KR/bannerbomb3.txt +++ b/_pages/ko_KR/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/ko_KR/checking-for-cfw.txt b/_pages/ko_KR/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/ko_KR/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/ko_KR/credits.txt b/_pages/ko_KR/credits.txt index 26a206845c..f438106b0a 100644 --- a/_pages/ko_KR/credits.txt +++ b/_pages/ko_KR/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **[Freenode #Cakey 채널](http://webchat.freenode.net/?channels=%23Cakey)의 모든 분께 정말 감사드립니다!** {: .notice--primary} @@ -22,7 +25,7 @@ title: "Credits" + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ title: "Credits" + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ title: "Credits" + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/ko_KR/dsidumper.txt b/_pages/ko_KR/dsidumper.txt index e0252fa496..9762798a6c 100644 --- a/_pages/ko_KR/dsidumper.txt +++ b/_pages/ko_KR/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. 기기를 종료해 주세요. -1. SD 카드를 컴퓨터에 삽입해 주세요. -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. SD 카드를 기기에 다시 삽입해 주세요. -1. 기기를 시작해 주세요. - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ko_KR/faq.txt b/_pages/ko_KR/faq.txt index 98692306bb..af753c0faa 100644 --- a/_pages/ko_KR/faq.txt +++ b/_pages/ko_KR/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** * Luma3DS는 어떻게 업데이트하나요?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** 아니요. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/ko_KR/finalizing-setup.txt b/_pages/ko_KR/finalizing-setup.txt index f1300e58b6..8e9305b8fd 100644 --- a/_pages/ko_KR/finalizing-setup.txt +++ b/_pages/ko_KR/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -여기에서는 [AuroraWright](https://github.com/AuroraWright/)의 Luma3DS를 사용해 패치된 SysNAND를 부팅하므로 EmuNAND를 사용할 필요가 없으며, 해킹된 3DS의 사용을 크게 단순화시키고 사용되는 SD 카드의 공간도 절약할 수 있습니다. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. 이 과정을 진행하는 동안 다음 프로그램도 설치하게 됩니다: + **FBI** *(CIA 형식의 게임 및 애플리케이션 설치)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(간단한 CFW 설치 업데이트)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **Godmode9** *(NAND와 게임 카드의 기능을 수행할 수 있는 다목적 툴)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes 1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. SD 카드의 최상위 경로에 `cias` 폴더가 없을 경우 폴더를 만어 주세요. 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. 기기를 종료해 주세요. -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. (Home)을 눌러 작업 메뉴를 띄워 주세요. @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -이제 Luma3DS Updater를 열고 (A)를 누르기만 하면 Luma3DS를 최신 버전으로 업데이트할 수 있습니다. - -이는 본체 업데이트와 다르며 오직 최신 버전의 Luma3DS 파일을 다운로드해서 압축을 풀어줍니다. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -이제 Luma3DS CFW SysNAND를 기본으로 시작할 것입니다. +You will now boot Luma3DS CFW by default. 앞으로 (Select)를 누른 채 기기를 부팅시키면 Luma3DS 설정 메뉴가 실행됩니다. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ GodMode9의 다양한 기능을 알고 싶다면[GodMode9 사용](godmode9-usage Luma3DS의 다양한 기능에 대해 알아보려면 [Luma3DS 위키](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage)를 참고해 주세요. {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/ko_KR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ko_KR/flashing-ntrboot-(3ds-multi-system).txt index 9b9d89bd92..fdb5728f09 100644 --- a/_pages/ko_KR/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/ko_KR/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt b/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt index 5beb8ad2c9..57f1ba0e9a 100644 --- a/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/ko_KR/flashing-ntrboot-(nds).txt b/_pages/ko_KR/flashing-ntrboot-(nds).txt index e73586fb13..9d19685964 100644 --- a/_pages/ko_KR/flashing-ntrboot-(nds).txt +++ b/_pages/ko_KR/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/ko_KR/formatting-sd-(linux).txt b/_pages/ko_KR/formatting-sd-(linux).txt new file mode 100644 index 0000000000..076a99088d --- /dev/null +++ b/_pages/ko_KR/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +이 페이지는 Linux 사용자를 위한 페이지입니다. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/ko_KR/formatting-sd-(mac).txt b/_pages/ko_KR/formatting-sd-(mac).txt new file mode 100644 index 0000000000..bedc78f85c --- /dev/null +++ b/_pages/ko_KR/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +이 페이지는 Mac 사용자를 위한 페이지입니다. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/ko_KR/formatting-sd-(windows).txt b/_pages/ko_KR/formatting-sd-(windows).txt new file mode 100644 index 0000000000..2e00650438 --- /dev/null +++ b/_pages/ko_KR/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +이 페이지는 Windows 사용자만 이용할 수 있습니다. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/ko_KR/get-started-(new-3ds).txt b/_pages/ko_KR/get-started-(new-3ds).txt index b1c8b87817..fde11c39b6 100644 --- a/_pages/ko_KR/get-started-(new-3ds).txt +++ b/_pages/ko_KR/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요. "이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 예를 들어, "9.0.0 이상 9.2.0 이하"는 9.0.0, 9.1.0및 9.2.0을 모두 포함합니다. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. 최근 브라우저 버전은 이 가이드의 New 3DS에서 무의미합니다. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요. "이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 기기의 버전은 본체 설정에 어가서 위쪽 화면의 우측 하단에서 확인할 수 있습니다. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
이상이하이상이하Action
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/ko_KR/get-started-(old-3ds).txt b/_pages/ko_KR/get-started-(old-3ds).txt index 10fafac519..3557bfea49 100644 --- a/_pages/ko_KR/get-started-(old-3ds).txt +++ b/_pages/ko_KR/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요. "이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 예를 들어, "9.0.0 이상 9.2.0 이하"는 9.0.0, 9.1.0및 9.2.0을 모두 포함합니다. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). 버전이 -0이면 브라우저가 없으며, -0 이상의 숫자는 브라우저가 설치되어 있음을 나타냅니다. - -"5.0.0-0U"의 경우 설치된 브라우저가 없으므로 "브라우저 없음" 열의 "5.0.0 이상 5.1.0 이하" 행을 선택하면 됩니다. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요. "이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 기기의 버전은 본체 설정에 어가서 위쪽 화면의 우측 하단에서 확인할 수 있습니다. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ For all versions you can also [Cartridge Update](cart-update) (or use a standard - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
이상 이하브라우저 없음브라우저 있음Action
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/ko_KR/get-started.txt b/_pages/ko_KR/get-started.txt index c491af3cea..a7240e762e 100644 --- a/_pages/ko_KR/get-started.txt +++ b/_pages/ko_KR/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요. "이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 예를 들어, "9.0.0 이상 9.2.0 이하"는 9.0.0, 9.1.0및 9.2.0을 모두 포함합니다. - -기기의 버전은 본체 설정에 어가서 위쪽 화면의 우측 하단에서 확인할 수 있습니다. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -EmuNAND 기반의 CFW 3DS를 보유한 경우 모든 과정을 SysNAND에 적용해 주세요. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -시작하기에 앞서, Windows 사용자는 [파일 확장자명 (Windows)](file-extensions-(windows)) 가이드를 이용해 파일 확장자명이 표시되게 해야 합니다! -{: .notice--info} - -시작하기 전에 [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), 또는 [F3X (Mac)](f3x-(mac))을 사용해 SD 카드의 오류 여부를 확인해 주세요! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
이상이하Action
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/ko_KR/godmode9-usage.txt b/_pages/ko_KR/godmode9-usage.txt index 4402305e8d..0b04b7025a 100644 --- a/_pages/ko_KR/godmode9-usage.txt +++ b/_pages/ko_KR/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/ko_KR/home.txt b/_pages/ko_KR/home.txt index 2339554961..a4fb21815e 100644 --- a/_pages/ko_KR/home.txt +++ b/_pages/ko_KR/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## 커스텀 펌웨어로 무엇을 할 수 있나요? + 지역에 상관 없이 게임 팩 및 e숍 게임의 실행 및 설치 -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + 보유 게임의 "롬 핵" 사용 + 게임 플레이 및 애플리케이션 스크린샷 촬영 + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **가이드를 시작하기 앞서 반드시 3DS 해킹의 위험 요소를 인지하기 바랍니다: 시스템을 수정하는 모든 행위는 기기를 복구가 불가능한 벽돌로 만들 위험을 안고 있습니다. 매우 드물어도 가능성은 존재하므로 모든 절차을 정확하게 따라 주세요.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + 모든 것이 계획대로 진행될 경우 시작할 때 갖고 있던 데이터가 모두 보존됩니다. (게임, NNID, 저장 데이터 등) + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + SD 카드는 [GPT가 아니라 MBR](http://www.howtogeek.com/245610/) 기반이어야 합니다. (처음 샀을 때 끼워져 있는 SD 카드는 기본적으로 MBR입니다.) The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt b/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ko_KR/homebrew-launcher-(pichaxx).txt b/_pages/ko_KR/homebrew-launcher-(pichaxx).txt index e43bbd8f5e..689fba7293 100644 --- a/_pages/ko_KR/homebrew-launcher-(pichaxx).txt +++ b/_pages/ko_KR/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. SD 카드를 기기에 다시 삽입해 주세요. 1. 기기를 시작해 주세요. 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. 기기를 종료해 주세요. ___ diff --git a/_pages/ko_KR/homebrew-launcher-(soundhax).txt b/_pages/ko_KR/homebrew-launcher-(soundhax).txt index cd0b882d3c..66ee5a3ff7 100644 --- a/_pages/ko_KR/homebrew-launcher-(soundhax).txt +++ b/_pages/ko_KR/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! 홈브류 런처 접속에 [대안](homebrew-launcher-(alternatives))이 필요할 것입니다! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! 홈브류 런처 접속에 [대안](homebrew-launcher-(alternatives))이 필요할 것입니다! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/ko_KR/homebrew-launcher-(steelhax).txt b/_pages/ko_KR/homebrew-launcher-(steelhax).txt index 7ff1b7d55e..65ec1b9a69 100644 --- a/_pages/ko_KR/homebrew-launcher-(steelhax).txt +++ b/_pages/ko_KR/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. 기기를 종료해 주세요. -1. SD 카드를 컴퓨터에 삽입해 주세요. -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. SD 카드를 기기에 다시 삽입해 주세요. -1. 기기를 시작해 주세요. -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/ko_KR/installing-boot9strap-(browser).txt b/_pages/ko_KR/installing-boot9strap-(browser).txt index ba6fd1e7ac..07c658ba17 100644 --- a/_pages/ko_KR/installing-boot9strap-(browser).txt +++ b/_pages/ko_KR/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. SD 카드를 기기에 다시 삽입해 주세요. 1. 기기를 시작해 주세요. #### Section II - Launching SafeB9SInstaller -1. 기기에서 브라우저를 열고 다음 주소 중 하나에 접속해 주세요. - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. 기기를 시작해 주세요. +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. - + If you get an error, just continue the next page ___ diff --git a/_pages/ko_KR/installing-boot9strap-(fredtool).txt b/_pages/ko_KR/installing-boot9strap-(fredtool).txt index e97ef92d53..d25e97556b 100644 --- a/_pages/ko_KR/installing-boot9strap-(fredtool).txt +++ b/_pages/ko_KR/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. SD 카드를 기기에 다시 삽입해 주세요. 1. 기기를 시작해 주세요. @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. SD 카드를 기기에 다시 삽입해 주세요. 1. 기기를 시작해 주세요. diff --git a/_pages/ko_KR/installing-boot9strap-(frogtool).txt b/_pages/ko_KR/installing-boot9strap-(frogtool).txt index 5b27d77470..490fb9fe42 100644 --- a/_pages/ko_KR/installing-boot9strap-(frogtool).txt +++ b/_pages/ko_KR/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. SD 카드를 컴퓨터에 삽입해 주세요. 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. SD 카드를 기기에 다시 삽입해 주세요. @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. 성공하면 홈브류 런처가 실행될 것입니다. +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/ko_KR/installing-boot9strap-(hardmod).txt b/_pages/ko_KR/installing-boot9strap-(hardmod).txt index 5f9050332c..d1aa305852 100644 --- a/_pages/ko_KR/installing-boot9strap-(hardmod).txt +++ b/_pages/ko_KR/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt index 8ff45cc80e..a42d09cecd 100644 --- a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. 성공하면 홈브류 런처가 실행될 것입니다. -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt index f6d59e53f0..5f8e183e73 100644 --- a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt +++ b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. 기기를 종료해 주세요. -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. SD 카드를 기기에 다시 삽입해 주세요. +1. Reinsert your SD card into your 3DS 1. 기기를 시작해 주세요. #### Section II - ntrboot diff --git a/_pages/ko_KR/installing-boot9strap-(pichaxx).txt b/_pages/ko_KR/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..d0f642cca1 --- /dev/null +++ b/_pages/ko_KR/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. 기기를 종료해 주세요. +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. SD 카드를 기기에 다시 삽입해 주세요. +1. 기기를 시작해 주세요. +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ko_KR/installing-boot9strap-(safecerthax).txt b/_pages/ko_KR/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..64c4ce669f --- /dev/null +++ b/_pages/ko_KR/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. 기기를 종료해 주세요. +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. SD 카드를 기기에 다시 삽입해 주세요. +1. 기기를 시작해 주세요. + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. 기기를 종료해 주세요. + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. 기기를 종료해 주세요. + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ko_KR/installing-boot9strap-(soundhax).txt b/_pages/ko_KR/installing-boot9strap-(soundhax).txt index 76c6e55b50..0777f35bf1 100644 --- a/_pages/ko_KR/installing-boot9strap-(soundhax).txt +++ b/_pages/ko_KR/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. SD 카드를 기기에 다시 삽입해 주세요. 1. 기기를 시작해 주세요. @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. `/ SDCARD`로 가서 "<3 nedwill 2016"를 재생해 주세요. + 여러 번의 시도가 필요할 수 있습니다. - + 재생중 화면이 멈출 경우 전원 버튼을 길게 눌러서 기기를 강제로 종료시킨 후 다시 시도해 주세요. + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt b/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..2e48a2e49f --- /dev/null +++ b/_pages/ko_KR/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. 기기를 종료해 주세요. +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. SD 카드를 기기에 다시 삽입해 주세요. +1. 기기를 시작해 주세요. + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. 기기를 종료해 주세요. + +#### Section III - Launching SafeB9SInstaller +1. 기기를 시작해 주세요. +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. 기기를 종료해 주세요. + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt index 813fd4572e..7dbef913c7 100644 --- a/_pages/ko_KR/installing-boot9strap-(usm).txt +++ b/_pages/ko_KR/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. SD 카드를 컴퓨터에 삽입해 주세요. 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/ko_KR/legacy-methods.txt b/_pages/ko_KR/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/ko_KR/legacy-methods.txt +++ b/_pages/ko_KR/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/ko_KR/ntrboot.txt b/_pages/ko_KR/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/ko_KR/ntrboot.txt +++ b/_pages/ko_KR/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ko_KR/region-changing.txt b/_pages/ko_KR/region-changing.txt index d4a09ea015..d35229538d 100644 --- a/_pages/ko_KR/region-changing.txt +++ b/_pages/ko_KR/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma 이 작업을 진행하면 NNID가 더이상 시스템과 호환되지 않아 연결이 해제됩니다. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. 기존 지역에서 e숍에 접속한 적이 있는 New 3DS는 지역을 바꾼 후 새로운 NNID를 만들 수 없으며 e숍에도 접속할 수 없습니다! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} 간혹 e숍 접속이 가능해야 하는 기기임에도 알 수 없는 이유로 이용이 불가능한 경우도 있음을 참고해 주세요. 이는 전적으로 닌텐도의 서버와 연관된 문제로 @@ -56,12 +56,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. SD 카드를 기기에 다시 삽입해 주세요. -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. (Home)을 눌러 작업 메뉴를 띄워 주세요. +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. (A)를 눌러 주세요. + + 이 과정은 시간이 좀 걸릴 것입니다. + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. (A)를 눌러 진행해 주세요. +1. (B)를 눌러 메인 메뉴로 돌아가 주세요. +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. (R) 버튼과 (B)를 동시에 눌러 SD 카드를 뺄 준비를 해 주세요. +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + 여러 위치에 백업을 해 주세요. (온라인 파일 저장 공간 등) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. SD 카드를 기기에 다시 삽입해 주세요. + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. CTRTransfer `.bin`에 (A)를 눌러 선택해 주세요. 1. "CTRNAND options..."를 선택해 주세요. @@ -88,7 +110,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + 오류가 발생하면 DNS 설정을 "자동"으로 설정해 주세요. -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -101,7 +123,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. 성공하면 홈브류 런처가 실행될 것입니다. -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -121,14 +143,14 @@ If script found no user tickets told you to skip this section, then skip this se + (B)를 눌러 CDN에서 티켓 설치를 거절해 주세요. 1. (Home)을 눌러 FBI를 종료해 주세요. -#### Section V - Region settings +#### Section VI - Region settings 1. 본체 설정을 실행해 주세요. 1. "기타 설정", "유저 정보"및 "지역 정보"로 이동해 주세요. 1. 변경한 지역에 속한 국가를 선택해 주세요. 1. 메시지가 뜨더라도 '도'까지 설정할 필요는 없습니다. -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/ko_KR/restoring-cfw.txt b/_pages/ko_KR/restoring-cfw.txt new file mode 100644 index 0000000000..a8bcd4dc9e --- /dev/null +++ b/_pages/ko_KR/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. SD 카드를 컴퓨터에 삽입해 주세요. +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. SD 카드를 기기에 다시 삽입해 주세요. + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요. + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/ko_KR/seedminer.txt b/_pages/ko_KR/seedminer.txt index be4475445e..d7858abba6 100644 --- a/_pages/ko_KR/seedminer.txt +++ b/_pages/ko_KR/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. SD 카드를 컴퓨터에 삽입해 주세요. 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. 기기를 시작해 주세요. 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/ko_KR/site-navigation.txt b/_pages/ko_KR/site-navigation.txt index 56ffccdc63..b2f5a35827 100644 --- a/_pages/ko_KR/site-navigation.txt +++ b/_pages/ko_KR/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **자주 방문하는 페이지** + [Finalizing Setup](finalizing-setup) -+ [홈브류 런처 (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [기여하신 분](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [기부](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [시작하기](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [홈](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [홈브류 런처 (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [EmuNAND기반 데이터 이동](move-emunand) + [ntrboot](ntrboot) + [지역 변경](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [문제 해결](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ko_KR/updating-b9s.txt b/_pages/ko_KR/updating-b9s.txt index eb7d6d8757..3f109afad5 100644 --- a/_pages/ko_KR/updating-b9s.txt +++ b/_pages/ko_KR/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. SD 카드를 컴퓨터에 삽입해 주세요. -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. 기기를 종료해 주세요. 1. SD 카드를 컴퓨터에 삽입해 주세요. -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. SD 카드를 기기에 다시 삽입해 주세요. 1. 기기를 시작해 주세요. diff --git a/_pages/ms_MY/a9lh-to-b9s.txt b/_pages/ms_MY/a9lh-to-b9s.txt index 525d8213b4..e2eb0dafa6 100644 --- a/_pages/ms_MY/a9lh-to-b9s.txt +++ b/_pages/ms_MY/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Pasang kad SD anda ke dalam komputer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/ms_MY/bannerbomb3.txt b/_pages/ms_MY/bannerbomb3.txt index f46205a0bb..977d0a92e7 100644 --- a/_pages/ms_MY/bannerbomb3.txt +++ b/_pages/ms_MY/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/ms_MY/checking-for-cfw.txt b/_pages/ms_MY/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/ms_MY/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/ms_MY/credits.txt b/_pages/ms_MY/credits.txt index a1c04249be..7734261f4e 100644 --- a/_pages/ms_MY/credits.txt +++ b/_pages/ms_MY/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Ribuan terima kasih kepada semua [#Cakey di Freenode](http://webchat.freenode.net/?channels=%23Cakey) anda semua mengagumkan!** {: .notice--primary} @@ -22,7 +25,7 @@ Jika nama anda tiada disenarai, hubungi saya dan saya akan tambahkan nama anda. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Jika nama anda tiada disenarai, hubungi saya dan saya akan tambahkan nama anda. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Jika nama anda tiada disenarai, hubungi saya dan saya akan tambahkan nama anda. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/ms_MY/dsidumper.txt b/_pages/ms_MY/dsidumper.txt index b0f117ac62..9762798a6c 100644 --- a/_pages/ms_MY/dsidumper.txt +++ b/_pages/ms_MY/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Pasang kad SD anda ke dalam komputer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ms_MY/faq.txt b/_pages/ms_MY/faq.txt index fbaac3aa10..91c785c838 100644 --- a/_pages/ms_MY/faq.txt +++ b/_pages/ms_MY/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *Bagaimana cara mengemas kini Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** Tidak. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/ms_MY/finalizing-setup.txt b/_pages/ms_MY/finalizing-setup.txt index 6581b4d509..ca293358a2 100644 --- a/_pages/ms_MY/finalizing-setup.txt +++ b/_pages/ms_MY/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -Dalam kes ini, kita menggunakan Luma3DS dari [AuroraWright](https://github.com/AuroraWright/) untuk boot SysNAND yang ditampal secara terus, membolehkan kita sepenuhnya melepasi keperluan apa-apa jenis EmuNAND, lalu memudahkan penggunaan 3DS yang diubah suai dalam menjimatkan ruang kad SD. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Semasa proses ini, kami juga akan memasang program-program berikut: + **FBI** *(pemasangan CIA formatted games dan aplikasi)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(kemaskini CFW anda dengan mudah)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ Semasa proses ini, kami juga akan memasang program-program berikut: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ Semasa proses ini, kami juga akan memasang program-program berikut: 1. Power off your device 1. Pasang kad SD anda ke dalam komputer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Cipta satu folder bernama `cias` pada root kad SD anda jika ianya tidak pernah wujud 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Anda kini boleh menggunakan Luma3DS Updater untuk mengemaskini Luma3DS anda kepada versi terkini hanya dengan membukanya dan menekan (A). - -Ini bukanlah perkara yang sama seperti kemas kini sistem; Ia hanya muat turun dan memasang fail Luma3DS yang terbaru. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. Anda kini boleh menahan butang (Select) ketika boot untuk melancarkan menu konfigurasi Luma3DS. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us Untuk maklumat mengenai pelbagai penggunaan Luma3ds, lihat halaman [wikinya](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/ms_MY/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ms_MY/flashing-ntrboot-(3ds-multi-system).txt index 1d09c0475c..0f9a811365 100644 --- a/_pages/ms_MY/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/ms_MY/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt b/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt index bbe053b3c1..0532c4bcac 100644 --- a/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/ms_MY/flashing-ntrboot-(nds).txt b/_pages/ms_MY/flashing-ntrboot-(nds).txt index 187cf4b858..af99cf479f 100644 --- a/_pages/ms_MY/flashing-ntrboot-(nds).txt +++ b/_pages/ms_MY/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/ms_MY/formatting-sd-(linux).txt b/_pages/ms_MY/formatting-sd-(linux).txt new file mode 100644 index 0000000000..d11cbe4e0f --- /dev/null +++ b/_pages/ms_MY/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Laman ini hanya untuk pengguna Linux sahaja. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/ms_MY/formatting-sd-(mac).txt b/_pages/ms_MY/formatting-sd-(mac).txt new file mode 100644 index 0000000000..7568cda1c4 --- /dev/null +++ b/_pages/ms_MY/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Laman ini adalah untuk pengguna Mac sahaja. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Pasang kad SD anda ke dalam komputer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Pasang kad SD anda ke dalam komputer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/ms_MY/formatting-sd-(windows).txt b/_pages/ms_MY/formatting-sd-(windows).txt new file mode 100644 index 0000000000..f33b272f80 --- /dev/null +++ b/_pages/ms_MY/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Laman ini hanya untuk pengguna Windows sahaja. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Pasang kad SD anda ke dalam komputer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/ms_MY/get-started-(new-3ds).txt b/_pages/ms_MY/get-started-(new-3ds).txt index 26c5342b56..36e227e478 100644 --- a/_pages/ms_MY/get-started-(new-3ds).txt +++ b/_pages/ms_MY/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Pilih halaman yang sesuatu untuk versi anda berdasarkan carta dibawah. Note that the "from" and "to" fields are inclusive. Ini bermakna, sebagai contoh, "barisan melintang dari 9.0.0 hingga 9.2.0" termasuk juga 9.0.0, 9.1.0 dan 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Pilih halaman yang sesuai untuk versi anda berdasarkan carta dibawah. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToDariHinggaAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/ms_MY/get-started-(old-3ds).txt b/_pages/ms_MY/get-started-(old-3ds).txt index befa247c7a..524e8dcbe6 100644 --- a/_pages/ms_MY/get-started-(old-3ds).txt +++ b/_pages/ms_MY/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Pilih halaman yang sesuai untuk versi anda berdasarkan carta dibawah. Note that the "from" and "to" fields are inclusive. Ini bermakna, sebagai contoh, "dari 9.0.0 hingga 9.2.0" termasuk 9.0.0, 9.1.0 dan 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Jika versinya ialah -0 anda tidak mempunyai browser, manakala jika ada ternampak apa-apa nombor atas -0 ia menunjukkan browser sudah dipasang. - -Sebagai contoh didalam kes "5.0.0-0U", anda akan mengikuti barisan melintang "Tiada Browser" dan barisan 5.0.0 hingga 5.1.0 kerana ianya berada di lingkungan versi sistem dan tiada browser dipasang. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Pilih halaman yang sesuai untuk versi anda berdasarkan carta dibawah. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Dari HinggaTiada BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/ms_MY/get-started.txt b/_pages/ms_MY/get-started.txt index 5a89223a45..a7240e762e 100644 --- a/_pages/ms_MY/get-started.txt +++ b/_pages/ms_MY/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Pilih halaman yang sesuai untuk versi anda berdasarkan carta dibawah. Note that the "from" and "to" fields are inclusive. Ini bermakna, sebagai contoh, "dari 9.0.0 hingga 9.2.0" termasuk 9.0.0, 9.1.0 dan 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Jika anda sudah mengubah suai 3DS sebelum ni dan mempunyai EmuNAND berdasarkan pemasangan CFW, sila ikut semua langkah semasa di SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Sebelum bermula, sila pastikan kad SD anda tiada sebarang kerosakkan dengan menggunakan [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), atau [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DariHinggaAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/ms_MY/godmode9-usage.txt b/_pages/ms_MY/godmode9-usage.txt index 57bed709a1..395a2a94b7 100644 --- a/_pages/ms_MY/godmode9-usage.txt +++ b/_pages/ms_MY/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/ms_MY/home.txt b/_pages/ms_MY/home.txt index 720a50997d..ca59a05d55 100644 --- a/_pages/ms_MY/home.txt +++ b/_pages/ms_MY/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## Apa yang boleh saya lakukan dengan Custom Firmware? + Main semua kad permainan dan permainan eShop tanpa mengira kawasan peranti -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Gunakan "ROM hacks" untuk games yang anda miliki + Ambil screenshot games dan aplikasi + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + ** Sebelum memulakan panduan, anda mesti tahu risiko-risiko ubahsuai 3DS: SETIAP kali anda mengubah suai sistem anda, sentiasa ada potensi untuk brick yang tidak dapat DIPULIHKAN. Mereka jarang berlaku, tetapi masih berkemungkinan, jadi pastikan anda ikut SEMUA arahan DENGAN TEPAT.* * + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Jika segala-galanya mengikut perancangan, anda tidak akan kehilangan sebarang data dan akhirnya masih yang sama (games, NNID, saves, dan sebagainya akan dikekalkan). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt b/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ms_MY/homebrew-launcher-(pichaxx).txt b/_pages/ms_MY/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/ms_MY/homebrew-launcher-(pichaxx).txt +++ b/_pages/ms_MY/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/ms_MY/homebrew-launcher-(soundhax).txt b/_pages/ms_MY/homebrew-launcher-(soundhax).txt index 4076d14282..c9d2d93c77 100644 --- a/_pages/ms_MY/homebrew-launcher-(soundhax).txt +++ b/_pages/ms_MY/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/ms_MY/homebrew-launcher-(steelhax).txt b/_pages/ms_MY/homebrew-launcher-(steelhax).txt index e11a45832a..65ec1b9a69 100644 --- a/_pages/ms_MY/homebrew-launcher-(steelhax).txt +++ b/_pages/ms_MY/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Pasang kad SD anda ke dalam komputer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/ms_MY/installing-boot9strap-(browser).txt b/_pages/ms_MY/installing-boot9strap-(browser).txt index 65fbc04ccc..41c26e6118 100644 --- a/_pages/ms_MY/installing-boot9strap-(browser).txt +++ b/_pages/ms_MY/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Pasang kad SD anda ke dalam komputer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Tekan (Start) untuk save dan reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/ms_MY/installing-boot9strap-(fredtool).txt b/_pages/ms_MY/installing-boot9strap-(fredtool).txt index fcb04e7dc2..88ae254fb8 100644 --- a/_pages/ms_MY/installing-boot9strap-(fredtool).txt +++ b/_pages/ms_MY/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Pasang kad SD anda ke dalam komputer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/ms_MY/installing-boot9strap-(frogtool).txt b/_pages/ms_MY/installing-boot9strap-(frogtool).txt index 44be6d4338..361b547435 100644 --- a/_pages/ms_MY/installing-boot9strap-(frogtool).txt +++ b/_pages/ms_MY/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Pasang kad SD anda ke dalam komputer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Tekan (Start) untuk save dan reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/ms_MY/installing-boot9strap-(hardmod).txt b/_pages/ms_MY/installing-boot9strap-(hardmod).txt index 08621de41f..1322095455 100644 --- a/_pages/ms_MY/installing-boot9strap-(hardmod).txt +++ b/_pages/ms_MY/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt index 98efa234d4..a42d09cecd 100644 --- a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Tekan (Start) untuk save dan reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt index 58d5b3e6fa..6ea953b3ab 100644 --- a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt +++ b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/ms_MY/installing-boot9strap-(pichaxx).txt b/_pages/ms_MY/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..88fbd64c66 --- /dev/null +++ b/_pages/ms_MY/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Pasang kad SD anda ke dalam komputer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Tekan (Start) untuk save dan reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ms_MY/installing-boot9strap-(safecerthax).txt b/_pages/ms_MY/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..45f5693d3f --- /dev/null +++ b/_pages/ms_MY/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Pasang kad SD anda ke dalam komputer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Tekan (Start) untuk save dan reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ms_MY/installing-boot9strap-(soundhax).txt b/_pages/ms_MY/installing-boot9strap-(soundhax).txt index 5f201aeb92..ba63c6896d 100644 --- a/_pages/ms_MY/installing-boot9strap-(soundhax).txt +++ b/_pages/ms_MY/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Pasang kad SD anda ke dalam komputer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Pergi ke `/SDCARD`, kemudian mainkan "<3 nedwill 2016" + Mungkin memerlukan beberapa kali cubaan - + Jika ia beku, anda boleh memaksa power off peranti anda dengan menahan butang power, kemudian cuba lagi + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ms_MY/installing-boot9strap-(ssloth-browser).txt b/_pages/ms_MY/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..b892d6bbd3 --- /dev/null +++ b/_pages/ms_MY/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Pasang kad SD anda ke dalam komputer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Tekan (Start) untuk save dan reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/ms_MY/installing-boot9strap-(usm).txt b/_pages/ms_MY/installing-boot9strap-(usm).txt index da773908bc..38bde331da 100644 --- a/_pages/ms_MY/installing-boot9strap-(usm).txt +++ b/_pages/ms_MY/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Pasang kad SD anda ke dalam komputer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Pasang kad SD anda ke dalam komputer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/ms_MY/legacy-methods.txt b/_pages/ms_MY/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/ms_MY/legacy-methods.txt +++ b/_pages/ms_MY/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/ms_MY/ntrboot.txt b/_pages/ms_MY/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/ms_MY/ntrboot.txt +++ b/_pages/ms_MY/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ms_MY/region-changing.txt b/_pages/ms_MY/region-changing.txt index 688946a4a7..8fe84bfb21 100644 --- a/_pages/ms_MY/region-changing.txt +++ b/_pages/ms_MY/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma Proses ini juga akan memisahkan NNID anda dari sistem, memandangkan ianya tidak lagi serasi denganya. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Penukaran kawasan New 3DS yang sudah menggunakan eShop mereka pada kawasan asal tidak boleh mencipta NNID baru dan penggunaan eShop pada kawasan yang baru! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Perhatian bahawa kadang-kala eShop akan tidak berfungsi untuk peranti yang ia boleh gunakan. Ini semua bergantung pada server Nintendo, dan saya tiada kuasa untuk mengawalnya. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Penyebab ini masih lagi tidak diketahui. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Tekan (A) untuk pengesahan + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Tekan (A) untuk meneruskan +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Tahan (R) dan tekan (B) pada masa yang sama untuk mengeluarkan kad SD +1. Pasang kad SD anda ke dalam komputer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + Jika terdapat error, set DNS settings anda ke "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Pergi ke "Other Settings", "Profile", kemudian "Region Settings" 1. Pilih negara dari kawasan yang anda tukarkan 1. Jika ditanya, anda tidak perlu melakukan bahagian negeri -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/ms_MY/restoring-cfw.txt b/_pages/ms_MY/restoring-cfw.txt new file mode 100644 index 0000000000..1537be00b8 --- /dev/null +++ b/_pages/ms_MY/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Pasang kad SD anda ke dalam komputer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Tekan (Start) untuk save dan reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/ms_MY/seedminer.txt b/_pages/ms_MY/seedminer.txt index fc51087297..9cf74ab629 100644 --- a/_pages/ms_MY/seedminer.txt +++ b/_pages/ms_MY/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Pasang kad SD anda ke dalam komputer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/ms_MY/site-navigation.txt b/_pages/ms_MY/site-navigation.txt index 1065b922c2..2d0a52fda7 100644 --- a/_pages/ms_MY/site-navigation.txt +++ b/_pages/ms_MY/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Kredit](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Sumbangan](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Mulakan](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatif)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) ++ [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Pindah EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Menukar Kawasan](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Penyelesaian](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/ms_MY/updating-b9s.txt b/_pages/ms_MY/updating-b9s.txt index 26526ce503..b863def22f 100644 --- a/_pages/ms_MY/updating-b9s.txt +++ b/_pages/ms_MY/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Pasang kad SD anda ke dalam komputer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Pasang kad SD anda ke dalam komputer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/nl_NL/a9lh-to-b9s.txt b/_pages/nl_NL/a9lh-to-b9s.txt index 6e2b65aba8..71ae28d4bd 100644 --- a/_pages/nl_NL/a9lh-to-b9s.txt +++ b/_pages/nl_NL/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Schakel je 3ds uit 1. Plaats je SD kaart in je computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/nl_NL/bannerbomb3.txt b/_pages/nl_NL/bannerbomb3.txt index 599767cbb3..a67e8a4864 100644 --- a/_pages/nl_NL/bannerbomb3.txt +++ b/_pages/nl_NL/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/nl_NL/checking-for-cfw.txt b/_pages/nl_NL/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/nl_NL/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/nl_NL/credits.txt b/_pages/nl_NL/credits.txt index 010d1adcab..a6300e5391 100644 --- a/_pages/nl_NL/credits.txt +++ b/_pages/nl_NL/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Speciale dank aan iedereen op [#Cakey Freenode](http://webchat.freenode.net/?channels=%23Cakey) omdat ze awesome zijn** {: .notice--primary} @@ -22,7 +25,7 @@ Als ik je hier ben vergeten te noemen, neem contact met me op, dan voeg ik je to + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Als ik je hier ben vergeten te noemen, neem contact met me op, dan voeg ik je to + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Als ik je hier ben vergeten te noemen, neem contact met me op, dan voeg ik je to + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/nl_NL/dsidumper.txt b/_pages/nl_NL/dsidumper.txt index 6ec5ed4fa4..9762798a6c 100644 --- a/_pages/nl_NL/dsidumper.txt +++ b/_pages/nl_NL/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Schakel je 3ds uit -1. Plaats je SD kaart in je computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Stop je SD kaart terug in je 3DS -1. Zet je 3DS aan - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/nl_NL/faq.txt b/_pages/nl_NL/faq.txt index e226427078..7313d9f74f 100644 --- a/_pages/nl_NL/faq.txt +++ b/_pages/nl_NL/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *Hoe update ik Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** Nee. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/nl_NL/finalizing-setup.txt b/_pages/nl_NL/finalizing-setup.txt index 35b66ad438..e66c744249 100644 --- a/_pages/nl_NL/finalizing-setup.txt +++ b/_pages/nl_NL/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In dit geval gebruiken we Luma3DS, gemaakt door [AuroraWright](https://github.com/AuroraWright/), om een gepatchde SysNAND op te starten, wat ervoor zorgt dat we geen EmuNAND nodig hebben, hierdoor is het makkelijker om een gehackte 3DS te gebruiken en bespaar je ruimte op je SD kaart. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Tijdens dit proces zullen we ook de volgende programma's installeren: + **FBI** *(Installeert spellen en applicaties in CIA formaat)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(Hiermee update je jouw CFW gemakkelijk)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multifunctionele tool met NAND en cartridge functies)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ Tijdens dit proces zullen we ook de volgende programma's installeren: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ Tijdens dit proces zullen we ook de volgende programma's installeren: 1. Schakel je 3ds uit 1. Plaats je SD kaart in je computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Maak een nieuwe map genaamd `cias` in de hooofdmap van je SD kaart, indien deze nog niet aanwezig is 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Schakel je 3ds uit -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Druk op de (Home) knop om het actiemenu te openen @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Je kan nu Luma3DS Updater gebruiken om Luma3DS te updaten naar de laatste versie door Luma3DS Updater te openen en op (A) te drukken. - -Dit is niet hetzeldfe als een Systeemupdate; het downloadt alleen de laatste versie van de Luma3DS bestanden. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Je zal nu standaard Luma3DS CFW SysNAND opstarten. +You will now boot Luma3DS CFW by default. Je kan nu (Select) ingedrukt houden bij het opstarten om in het Luma3DS instellingenmenu te komen. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Voor informatie over verschillende functies van GodMode9 kan je de [GodMode9 geb Voor informatie over het gebruik van de verschillende functies van Luma3DS, zie [deze wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/nl_NL/flashing-ntrboot-(3ds-multi-system).txt b/_pages/nl_NL/flashing-ntrboot-(3ds-multi-system).txt index e9a106e235..43272b4af4 100644 --- a/_pages/nl_NL/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/nl_NL/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt b/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt index d3d8d705f9..9ab94b8155 100644 --- a/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/nl_NL/flashing-ntrboot-(nds).txt b/_pages/nl_NL/flashing-ntrboot-(nds).txt index 8172a490b1..28a7f5ceaf 100644 --- a/_pages/nl_NL/flashing-ntrboot-(nds).txt +++ b/_pages/nl_NL/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/nl_NL/formatting-sd-(linux).txt b/_pages/nl_NL/formatting-sd-(linux).txt new file mode 100644 index 0000000000..cd713f9c04 --- /dev/null +++ b/_pages/nl_NL/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Deze pagina is alleen voor Linux gebruikers. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/nl_NL/formatting-sd-(mac).txt b/_pages/nl_NL/formatting-sd-(mac).txt new file mode 100644 index 0000000000..d8715e4b5a --- /dev/null +++ b/_pages/nl_NL/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Deze pagina is alleen voor Mac-gebruikers. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Plaats je SD kaart in je computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Plaats je SD kaart in je computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/nl_NL/formatting-sd-(windows).txt b/_pages/nl_NL/formatting-sd-(windows).txt new file mode 100644 index 0000000000..b07ef047e8 --- /dev/null +++ b/_pages/nl_NL/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Deze pagina is alleen voor windows-gebruikers. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Plaats je SD kaart in je computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/nl_NL/get-started-(new-3ds).txt b/_pages/nl_NL/get-started-(new-3ds).txt index cd05eb9031..aa19920708 100644 --- a/_pages/nl_NL/get-started-(new-3ds).txt +++ b/_pages/nl_NL/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel. Note that the "from" and "to" fields are inclusive. Dat betekent dat, bijvoorbeeld, de "van 9.0.0 tot 9.2.0" rij ook 9.0.0, 9.1.0 en 9.2.0 omvat. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel. Note that the "from" and "to" fields are inclusive. De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de systeeminstellingen vinden. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToVanNaarAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/nl_NL/get-started-(old-3ds).txt b/_pages/nl_NL/get-started-(old-3ds).txt index 87b39ac917..7d74f7ed26 100644 --- a/_pages/nl_NL/get-started-(old-3ds).txt +++ b/_pages/nl_NL/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel. Note that the "from" and "to" fields are inclusive. Dit betekent dat, bijvoorbeeld, de "van 9.0.0 to 9.2.0" rij 9.0.0, 9.1.0, en 9.2.0 inhoudt. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Als de versie -0 is heb je geen browser. Elk nummer dat hoger is dan -0 geeft aan dat er een browser geïnstalleerd is. - -In het geval van bijvoorbeeld "5.0.0-0U", moet je de "Geen Browser" kolom en de "5.0.0 tot 5.1.0" rij gebruiken. Je systeem heeft in dit geval namelijk geen browser en een versie die daar tussen valt. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel. Note that the "from" and "to" fields are inclusive. De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de systeeminstellingen vinden. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de syst - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Van NaarGeen BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/nl_NL/get-started.txt b/_pages/nl_NL/get-started.txt index 468567f9fb..a7240e762e 100644 --- a/_pages/nl_NL/get-started.txt +++ b/_pages/nl_NL/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel. Note that the "from" and "to" fields are inclusive. Dit betekent dat, bijvoorbeeld, de "van 9.0.0 to 9.2.0" rij 9.0.0, 9.1.0, en 9.2.0 inhoudt. - -De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de systeeminstellingen vinden. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Als je je 3DS al een keer hebt gehackt en je een op een EmuNAND gebaseerde CFW setup hebt, volg dan gewoon alle instructies terwijl je nog op SysNAND bent. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Voordat je begint is het handig om je SD kaart te controleren op fouten met behulp van [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), of [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
VanNaarAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/nl_NL/godmode9-usage.txt b/_pages/nl_NL/godmode9-usage.txt index ec9217c807..0ca1f543bb 100644 --- a/_pages/nl_NL/godmode9-usage.txt +++ b/_pages/nl_NL/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/nl_NL/home.txt b/_pages/nl_NL/home.txt index fb686b9083..4ba9826415 100644 --- a/_pages/nl_NL/home.txt +++ b/_pages/nl_NL/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## Wat kan ik doen met Custom Firmware? + Alle gamecards en eShop spellen spelen, ongeacht de regio -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + "ROM hacks" gebruiken voor spellen die je bezit + Screenshots maken van applicaties en gameplay + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Voordat je met deze handleiding begint moet je weten wat de risico's zijn van het hacken van je 3DS: ELKE keer als je een aanpassing maakt aan je 3DS zal er een altijd een kans zijn op een ONHERSTELBARE brick. Deze zijn zeer zeldzaam, maar het blijft altijd een mogelijkheid, dus wees er zeker van dat je ALLE stappen EXACT volgt.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + als alles volgens plan gaat, zal je geen data verliezen en eindigen met alles waarmee je begon (spellen, NNID, saves, etc. zullen bewaard blijven). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Je SD kaart zal een [MBR, niet GPT](http://www.howtogeek.com/245610/) (de SD card die standaard komt bij je 3DS is MBR) moeten zijn. The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt b/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/nl_NL/homebrew-launcher-(pichaxx).txt b/_pages/nl_NL/homebrew-launcher-(pichaxx).txt index b0f02de8a6..6655032135 100644 --- a/_pages/nl_NL/homebrew-launcher-(pichaxx).txt +++ b/_pages/nl_NL/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Schakel je 3ds uit ___ diff --git a/_pages/nl_NL/homebrew-launcher-(soundhax).txt b/_pages/nl_NL/homebrew-launcher-(soundhax).txt index cc314f813b..958f8e23c7 100644 --- a/_pages/nl_NL/homebrew-launcher-(soundhax).txt +++ b/_pages/nl_NL/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Je zal een [alternatieve methode](homebrew-launcher-(alternatives)) nodig hebben om de Homebrew Launcher te openen! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Je zal een [alternatieve methode](homebrew-launcher-(alternatives)) nodig hebben om de Homebrew Launcher te openen! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/nl_NL/homebrew-launcher-(steelhax).txt b/_pages/nl_NL/homebrew-launcher-(steelhax).txt index 84f0aa8f00..65ec1b9a69 100644 --- a/_pages/nl_NL/homebrew-launcher-(steelhax).txt +++ b/_pages/nl_NL/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Schakel je 3ds uit -1. Plaats je SD kaart in je computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Stop je SD kaart terug in je 3DS -1. Zet je 3DS aan -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/nl_NL/installing-boot9strap-(browser).txt b/_pages/nl_NL/installing-boot9strap-(browser).txt index 5d60b74ed2..a592e925f3 100644 --- a/_pages/nl_NL/installing-boot9strap-(browser).txt +++ b/_pages/nl_NL/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Schakel je 3ds uit 1. Plaats je SD kaart in je computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan #### Section II - Launching SafeB9SInstaller -1. Open de browser en ga naar een van de volgende URLs op je 3DS - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Zet je 3DS aan +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Druk op (Start) om op te slaan en opnieuw op te starten - + If you get an error, just continue the next page ___ diff --git a/_pages/nl_NL/installing-boot9strap-(fredtool).txt b/_pages/nl_NL/installing-boot9strap-(fredtool).txt index 5330bad171..62aeabf6c9 100644 --- a/_pages/nl_NL/installing-boot9strap-(fredtool).txt +++ b/_pages/nl_NL/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Schakel je 3ds uit 1. Plaats je SD kaart in je computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan diff --git a/_pages/nl_NL/installing-boot9strap-(frogtool).txt b/_pages/nl_NL/installing-boot9strap-(frogtool).txt index 2061548617..c56f4ee0f3 100644 --- a/_pages/nl_NL/installing-boot9strap-(frogtool).txt +++ b/_pages/nl_NL/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Plaats je SD kaart in je computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Stop je SD kaart terug in je 3DS @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Druk op (Start) om op te slaan en opnieuw op te starten + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Nu zou je console de Homebrew Launcher moeten openen +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/nl_NL/installing-boot9strap-(hardmod).txt b/_pages/nl_NL/installing-boot9strap-(hardmod).txt index f6edd49826..3d066772fa 100644 --- a/_pages/nl_NL/installing-boot9strap-(hardmod).txt +++ b/_pages/nl_NL/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt index 098781985f..a42d09cecd 100644 --- a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Druk op (Start) om op te slaan en opnieuw op te starten - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Nu zou je console de Homebrew Launcher moeten openen -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt index e03438ab9c..4053aa52fd 100644 --- a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt +++ b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Schakel je 3ds uit -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Stop je SD kaart terug in je 3DS +1. Reinsert your SD card into your 3DS 1. Zet je 3DS aan #### Section II - ntrboot diff --git a/_pages/nl_NL/installing-boot9strap-(pichaxx).txt b/_pages/nl_NL/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..6ac167ef06 --- /dev/null +++ b/_pages/nl_NL/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Schakel je 3ds uit +1. Plaats je SD kaart in je computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Stop je SD kaart terug in je 3DS +1. Zet je 3DS aan +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Druk op (Start) om op te slaan en opnieuw op te starten + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/nl_NL/installing-boot9strap-(safecerthax).txt b/_pages/nl_NL/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..2d5f0cae5c --- /dev/null +++ b/_pages/nl_NL/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Schakel je 3ds uit +1. Plaats je SD kaart in je computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Stop je SD kaart terug in je 3DS +1. Zet je 3DS aan + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Schakel je 3ds uit + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Druk op (Start) om op te slaan en opnieuw op te starten + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Schakel je 3ds uit + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/nl_NL/installing-boot9strap-(soundhax).txt b/_pages/nl_NL/installing-boot9strap-(soundhax).txt index bd3a1d510a..4adbc091b7 100644 --- a/_pages/nl_NL/installing-boot9strap-(soundhax).txt +++ b/_pages/nl_NL/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Schakel je 3ds uit 1. Plaats je SD kaart in je computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Ga naar `/SDCARD`, en speel dan "<3 nedwill 2016" af + Dit kan meerdere pogingen nodig hebben - + Als het vastloopt, zet het apparaat dan gewoon uit door de power knop ingedrukt te houden, probeer het daarna opnieuw + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/nl_NL/installing-boot9strap-(ssloth-browser).txt b/_pages/nl_NL/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..c0489ee174 --- /dev/null +++ b/_pages/nl_NL/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Schakel je 3ds uit +1. Plaats je SD kaart in je computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Stop je SD kaart terug in je 3DS +1. Zet je 3DS aan + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Schakel je 3ds uit + +#### Section III - Launching SafeB9SInstaller +1. Zet je 3DS aan +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Druk op (Start) om op te slaan en opnieuw op te starten + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Schakel je 3ds uit + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/nl_NL/installing-boot9strap-(usm).txt b/_pages/nl_NL/installing-boot9strap-(usm).txt index 23e5b38d76..6892d8608d 100644 --- a/_pages/nl_NL/installing-boot9strap-(usm).txt +++ b/_pages/nl_NL/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Plaats je SD kaart in je computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Schakel je 3ds uit 1. Plaats je SD kaart in je computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/nl_NL/legacy-methods.txt b/_pages/nl_NL/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/nl_NL/legacy-methods.txt +++ b/_pages/nl_NL/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/nl_NL/ntrboot.txt b/_pages/nl_NL/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/nl_NL/ntrboot.txt +++ b/_pages/nl_NL/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/nl_NL/region-changing.txt b/_pages/nl_NL/region-changing.txt index 8cdbd7bd45..421b43bd21 100644 --- a/_pages/nl_NL/region-changing.txt +++ b/_pages/nl_NL/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma Dit proces zal jouw NNID loskoppelen van het systeem, omdat het niet langer passend is met het systeem. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. De New 3DS'en die al eerder op de eShop op hun originele regio zijn geweest, kunnen geen nieuwe NNID maken en kunnen niet de eShop bezoeken wanneer de regio veranderd is! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Let wel op dat af en toe de eShop, zonder goede reden, nog steeds niet werkt voor de systemen waarop het wel zou moeten werken. Dit ligt helemaal bij de servers van Nintendo en ik heb hier totaal geen controle over. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). De oorzaak hiervoor is momenteel onbekend. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Stop je SD kaart terug in je 3DS -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Druk op de (Home) knop om het actiemenu te openen +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Druk op (A) om het te bevestigen + + Dit proces zal enige tijd duren + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Druk op (A) om door te gaan +1. Druk op (B) om terug te gaan naar het hoofdmenu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Houd (R) en (B) gelijkertijd ingedrukt om je SD kaart uit te werpen +1. Plaats je SD kaart in je computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Maak back-ups in verschillende locaties (zoals een online bestandsopslag) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Stop je SD kaart terug in je 3DS + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Druk op (A) op de CTRTransfer `.bin` om deze te selecteren 1. Selecteer "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + Als dit je een foutmelding geeft, zet dan je DNS instellingen op "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Nu zou je console de Homebrew Launcher moeten openen -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,19 +142,19 @@ If script found no user tickets told you to skip this section, then skip this se + Druk op (B) om het installeren van tickets van CDN te weigeren. 1. Druk op (Home) om FBI af te sluiten -#### Section V - Region settings +#### Section VI - Region settings 1. Open Systeem Instellingen 1. Ga naar "Andere Instellingen", "Profiel" en daarna "Regio Instellingen" 1. Selecteer een land van de regio waar je je apparaat naar hebt veranderd 1. Als er om gevraagd wordt hoef je niet een staat te selecteren -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Druk op (X) om de CTRTransfer image `.bin` te verwijderen -1. Druk op (A) om het te bevestigen +1. Druk op (A) om te bevestigen 1. Druk op (Start) om je 3DS opnieuw op te starten ___ diff --git a/_pages/nl_NL/restoring-cfw.txt b/_pages/nl_NL/restoring-cfw.txt new file mode 100644 index 0000000000..bb7e6d6c2b --- /dev/null +++ b/_pages/nl_NL/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Plaats je SD kaart in je computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Stop je SD kaart terug in je 3DS + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Druk op (Start) om op te slaan en opnieuw op te starten + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/nl_NL/seedminer.txt b/_pages/nl_NL/seedminer.txt index f8c819da46..597779537e 100644 --- a/_pages/nl_NL/seedminer.txt +++ b/_pages/nl_NL/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Plaats je SD kaart in je computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Zet je 3DS aan 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/nl_NL/site-navigation.txt b/_pages/nl_NL/site-navigation.txt index 616a3afec6..4c22d5bf4b 100644 --- a/_pages/nl_NL/site-navigation.txt +++ b/_pages/nl_NL/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false ** Aanbevolen ** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donaties](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Begin](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatieven)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [EmuNAND Verplaatsen](move-emunand) + [ntrboot](ntrboot) + [Regio Wijzigen](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) [Probleemoplossing](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/nl_NL/updating-b9s.txt b/_pages/nl_NL/updating-b9s.txt index c5894aefc9..ed1b769093 100644 --- a/_pages/nl_NL/updating-b9s.txt +++ b/_pages/nl_NL/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Plaats je SD kaart in je computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Schakel je 3ds uit 1. Plaats je SD kaart in je computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Stop je SD kaart terug in je 3DS 1. Zet je 3DS aan diff --git a/_pages/no_NO/a9lh-to-b9s.txt b/_pages/no_NO/a9lh-to-b9s.txt index 7162b93ddd..03811000eb 100644 --- a/_pages/no_NO/a9lh-to-b9s.txt +++ b/_pages/no_NO/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/no_NO/bannerbomb3.txt b/_pages/no_NO/bannerbomb3.txt index fc0cbaf018..a129922ea0 100644 --- a/_pages/no_NO/bannerbomb3.txt +++ b/_pages/no_NO/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/no_NO/checking-for-cfw.txt b/_pages/no_NO/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/no_NO/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/no_NO/credits.txt b/_pages/no_NO/credits.txt index 6fa9b7a184..26076a2ac1 100644 --- a/_pages/no_NO/credits.txt +++ b/_pages/no_NO/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Spesiell takk til alle på [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for å være fantastiske!** {: .notice--primary} @@ -22,7 +25,7 @@ Hvis jeg glemte deg, ta kontakt så legger jeg deg til. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Hvis jeg glemte deg, ta kontakt så legger jeg deg til. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Hvis jeg glemte deg, ta kontakt så legger jeg deg til. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/no_NO/dsidumper.txt b/_pages/no_NO/dsidumper.txt index 245dfa3479..9762798a6c 100644 --- a/_pages/no_NO/dsidumper.txt +++ b/_pages/no_NO/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Slå av enheten -1. Sett inn SD-kortet i datamaskinen din -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Sett inn SD-kortet i konsollen igjen -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/no_NO/faq.txt b/_pages/no_NO/faq.txt index a9b18dc766..502780ba98 100644 --- a/_pages/no_NO/faq.txt +++ b/_pages/no_NO/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Ja **Q:** *Hvordan oppdaterer jeg Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** Nei. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/no_NO/finalizing-setup.txt b/_pages/no_NO/finalizing-setup.txt index 0ac7e76f8f..206513dd96 100644 --- a/_pages/no_NO/finalizing-setup.txt +++ b/_pages/no_NO/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -I dette tilfellet bruker vi Luma3DS fra [AuroraWright](https://github.com/AuroraWright/) for å starte et patchet SysNAND direkte, slik at vi kan omgå behovet for alle slags EmuNAND fullstendig, og dermed forenkle bruken av en hacket 3DS utover det å spare plass på SD-kort. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Under denne prossesen, vil vi også sette opp program som følgende: + **FBI** *(installerer CIAformaterte spill og applikasjoner)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(oppdaterer CFWinstallasjonen vår)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ Under denne prossesen, vil vi også sette opp program som følgende: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ Under denne prossesen, vil vi også sette opp program som følgende: 1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Opprett en mappe kalt `cias` på roten av SD-kortet hvis den ikke allerede er der 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Kopier `GodMode9.firm` fra GodMode9 `.zip` til `/luma/payloads/` på SD-kortet ditt 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Slå av enheten -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Du kan nå bruke "Luma3DS Updater" for å oppdatere din Luma3DS til siste versjon, ved å åpne den og trykke (A). - -Dette er ikke det samme som en systemoppdatering; den bare laster ned og pakker ut de nyeste Luma3DS-filene. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. Du kan holde (Select) ved oppstart for å laste Luma3DSs konfigurasjonsmeny. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For informasjon om bruk av Luma3DS sine forskjellige funksjoner, sjekk ut [Lumas wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/no_NO/flashing-ntrboot-(3ds-multi-system).txt b/_pages/no_NO/flashing-ntrboot-(3ds-multi-system).txt index fab2d3e0ad..e8f6a1c81c 100644 --- a/_pages/no_NO/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/no_NO/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt b/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt index 75cc03d61d..813f3dfa84 100644 --- a/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/no_NO/flashing-ntrboot-(nds).txt b/_pages/no_NO/flashing-ntrboot-(nds).txt index 5493acd92f..f3d54c2ec4 100644 --- a/_pages/no_NO/flashing-ntrboot-(nds).txt +++ b/_pages/no_NO/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/no_NO/formatting-sd-(linux).txt b/_pages/no_NO/formatting-sd-(linux).txt new file mode 100644 index 0000000000..0961349911 --- /dev/null +++ b/_pages/no_NO/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Denne siden er kun for Linux-brukere. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/no_NO/formatting-sd-(mac).txt b/_pages/no_NO/formatting-sd-(mac).txt new file mode 100644 index 0000000000..9901f12266 --- /dev/null +++ b/_pages/no_NO/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Denne siden er kun for Mac-brukere. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Sett inn SD-kortet i datamaskinen din +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Sett inn SD-kortet i datamaskinen din +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/no_NO/formatting-sd-(windows).txt b/_pages/no_NO/formatting-sd-(windows).txt new file mode 100644 index 0000000000..d28420be4c --- /dev/null +++ b/_pages/no_NO/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Denne siden er kun for Windows-brukere. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Sett inn SD-kortet i datamaskinen din +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/no_NO/get-started-(new-3ds).txt b/_pages/no_NO/get-started-(new-3ds).txt index 4efed5f1b4..d9110253ba 100644 --- a/_pages/no_NO/get-started-(new-3ds).txt +++ b/_pages/no_NO/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Velg den aktuelle siden for din versjon fra diagrammet nedenfor. Note that the "from" and "to" fields are inclusive. Dette betyr at for eksempel, raden "fra 9.0.0 til 9.2.0" inkluderer 9.0.0, 9.1.0, og 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Velg den aktuelle siden for din versjon fra diagrammet nedenfor. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFraTilAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/no_NO/get-started-(old-3ds).txt b/_pages/no_NO/get-started-(old-3ds).txt index c0ea9b35bb..8b1e88e641 100644 --- a/_pages/no_NO/get-started-(old-3ds).txt +++ b/_pages/no_NO/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Velg den aktuelle siden for din versjon fra diagrammet nedenfor. Note that the "from" and "to" fields are inclusive. Dette betyr at for eksempel, raden "fra 9.0.0 til 9.2.0" inkluderer 9.0.0, 9.1.0, og 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Hvis versjonen er -0 da har du ikke en nettleser, mens et tall over -0 indikerer at en nettleser er installert. - -I tilfellet av "5.0.0-0U" for eksempel, ville du fulgt "ingen nettleser" kolonnen og 5.0.0 til 5.1.0 raden fordi systemet er på system versjonen i det området og har ingen nettleser installert. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Velg den aktuelle siden for din versjon fra diagrammet nedenfor. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Fra TilUten NettleserNettleserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/no_NO/get-started.txt b/_pages/no_NO/get-started.txt index ad02e05b5a..a7240e762e 100644 --- a/_pages/no_NO/get-started.txt +++ b/_pages/no_NO/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Velg den aktuelle siden for din versjon fra diagrammet nedenfor. Note that the "from" and "to" fields are inclusive. Dette betyr at for eksempel, raden "fra 9.0.0 til 9.2.0" inkluderer 9.0.0, 9.1.0, og 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Hvis du allerede har hacket din 3DS før og har et EmuNAND basert CFW oppsett, bare følg alle instruksene meden du er på SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Før du starter kan det være lurt å sjekke om SD-kortet er korrupt, du kan sjekke etter feil med, [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), eller [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FraTilAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/no_NO/godmode9-usage.txt b/_pages/no_NO/godmode9-usage.txt index 0e4cb13190..9ea553ebe5 100644 --- a/_pages/no_NO/godmode9-usage.txt +++ b/_pages/no_NO/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/no_NO/home.txt b/_pages/no_NO/home.txt index 5f7f1d8124..37adfd3ff6 100644 --- a/_pages/no_NO/home.txt +++ b/_pages/no_NO/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## Hva kan jeg gjøre med Custom Firmware? + Spille alle spillkassetter og eShopspill, uavhengig av region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Bruk av "ROM hacks" for spill du eier + Ta bilder av gameplay eller applikasjoner + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Før du starter veiledningen, må du vite risikoen for 3DS hacking: HVER gang du endrer systemet, er det alltid et potensial for en UOPPRETTELIG brick. De er sjeldne, men fortsatt en mulighet så pass på at du følger ALLE trinnene NØYAKTIG.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Hvis alt går etter planen, vil du ikke miste data, og ende opp med alt som du startet med (spill, NNID, saver, osv blir bevart). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt b/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/no_NO/homebrew-launcher-(pichaxx).txt b/_pages/no_NO/homebrew-launcher-(pichaxx).txt index 22beeaa0fa..d3e1977811 100644 --- a/_pages/no_NO/homebrew-launcher-(pichaxx).txt +++ b/_pages/no_NO/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Slå av enheten ___ diff --git a/_pages/no_NO/homebrew-launcher-(soundhax).txt b/_pages/no_NO/homebrew-launcher-(soundhax).txt index 21b81da3df..ba1a70bd92 100644 --- a/_pages/no_NO/homebrew-launcher-(soundhax).txt +++ b/_pages/no_NO/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/no_NO/homebrew-launcher-(steelhax).txt b/_pages/no_NO/homebrew-launcher-(steelhax).txt index 20a02643cc..65ec1b9a69 100644 --- a/_pages/no_NO/homebrew-launcher-(steelhax).txt +++ b/_pages/no_NO/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Slå av enheten -1. Sett inn SD-kortet i datamaskinen din -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Sett inn SD-kortet i konsollen igjen -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/no_NO/installing-boot9strap-(browser).txt b/_pages/no_NO/installing-boot9strap-(browser).txt index ce98724088..f1d83eb2b6 100644 --- a/_pages/no_NO/installing-boot9strap-(browser).txt +++ b/_pages/no_NO/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Trykk (Start) for å lagre og starte på nytt - + If you get an error, just continue the next page ___ diff --git a/_pages/no_NO/installing-boot9strap-(fredtool).txt b/_pages/no_NO/installing-boot9strap-(fredtool).txt index 29fb91a6a8..7f249c8793 100644 --- a/_pages/no_NO/installing-boot9strap-(fredtool).txt +++ b/_pages/no_NO/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device diff --git a/_pages/no_NO/installing-boot9strap-(frogtool).txt b/_pages/no_NO/installing-boot9strap-(frogtool).txt index 9a431c596f..bc5b61c4cd 100644 --- a/_pages/no_NO/installing-boot9strap-(frogtool).txt +++ b/_pages/no_NO/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Sett inn SD-kortet i datamaskinen din 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Sett inn SD-kortet i konsollen igjen @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Trykk (Start) for å lagre og starte på nytt + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/no_NO/installing-boot9strap-(hardmod).txt b/_pages/no_NO/installing-boot9strap-(hardmod).txt index bc38373498..f29ec3f2b1 100644 --- a/_pages/no_NO/installing-boot9strap-(hardmod).txt +++ b/_pages/no_NO/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt index 93ebf2d9b7..a42d09cecd 100644 --- a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt +++ b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Trykk (Start) for å lagre og starte på nytt - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/no_NO/installing-boot9strap-(ntrboot).txt b/_pages/no_NO/installing-boot9strap-(ntrboot).txt index 85bc76ac34..f100fa1770 100644 --- a/_pages/no_NO/installing-boot9strap-(ntrboot).txt +++ b/_pages/no_NO/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Slå av enheten -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Sett inn SD-kortet i konsollen igjen +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/no_NO/installing-boot9strap-(pichaxx).txt b/_pages/no_NO/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..ddeb4830c3 --- /dev/null +++ b/_pages/no_NO/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Slå av enheten +1. Sett inn SD-kortet i datamaskinen din +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Sett inn SD-kortet i konsollen igjen +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Trykk (Start) for å lagre og starte på nytt + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/no_NO/installing-boot9strap-(safecerthax).txt b/_pages/no_NO/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..d08c1c32ac --- /dev/null +++ b/_pages/no_NO/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Slå av enheten +1. Sett inn SD-kortet i datamaskinen din +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Sett inn SD-kortet i konsollen igjen +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Slå av enheten + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Trykk (Start) for å lagre og starte på nytt + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Slå av enheten + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/no_NO/installing-boot9strap-(soundhax).txt b/_pages/no_NO/installing-boot9strap-(soundhax).txt index 171502ee9c..a34cef2a79 100644 --- a/_pages/no_NO/installing-boot9strap-(soundhax).txt +++ b/_pages/no_NO/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Gå til `/SDCARD`, og spill deretter av "<3 nedwill 2016" + Dette kan ta flere forsøk - + Hvis enheten fryser, kan du tvinge den til å skru seg av ved og holde av-knappen og så prøve igjen + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/no_NO/installing-boot9strap-(ssloth-browser).txt b/_pages/no_NO/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..2a6f2f8230 --- /dev/null +++ b/_pages/no_NO/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Slå av enheten +1. Sett inn SD-kortet i datamaskinen din +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Sett inn SD-kortet i konsollen igjen +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Slå av enheten + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Trykk (Start) for å lagre og starte på nytt + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Slå av enheten + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/no_NO/installing-boot9strap-(usm).txt b/_pages/no_NO/installing-boot9strap-(usm).txt index fd213b9538..f19ca49cfc 100644 --- a/_pages/no_NO/installing-boot9strap-(usm).txt +++ b/_pages/no_NO/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Sett inn SD-kortet i datamaskinen din 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/no_NO/legacy-methods.txt b/_pages/no_NO/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/no_NO/legacy-methods.txt +++ b/_pages/no_NO/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/no_NO/ntrboot.txt b/_pages/no_NO/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/no_NO/ntrboot.txt +++ b/_pages/no_NO/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/no_NO/region-changing.txt b/_pages/no_NO/region-changing.txt index 643e805937..520d3c309b 100644 --- a/_pages/no_NO/region-changing.txt +++ b/_pages/no_NO/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma Denne prosessen vil delinke NNIDen din fra systemet, siden den vil ikke lenger være kompatibel. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Regionsbyttede New 3DSer som allerede har åpnet eShop i deres originale region, kann ikke lage en ny NNID og få tilgang til eShop i deres nye region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Legg merke til at noen ganger vil eShop uforklarlig fortsatt ikke virke for enheter som de burde virke for. Dette har bare noe med Nintendos servere å gjøre, og jeg har ikke noe kontroll over det. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Sett inn SD-kortet i konsollen igjen -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Trykk (A) for å bekrefte + + Denne prosessen vil ta litt tid + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Trykk (A) for å fortsette +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) og trykk (B) for å løse ut SD-kortet +1. Sett inn SD-kortet i datamaskinen din +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Sett inn SD-kortet i konsollen igjen + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Trykk (A) på CTRTransfer `.bin` for å velge den 1. Velg "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Oppdateringer mens du bruker B9S + Luma (det du har) er trygt + Hvis dette gir deg en feil, sett DNS-innstillingene til "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Gå til "Other Settings", "Profile", og deretter "Region Settings" 1. Velg et land fra den regionen du byttet til 1. Hvis du bir spurt, er det ikke nødvendig å angi stat -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/no_NO/restoring-cfw.txt b/_pages/no_NO/restoring-cfw.txt new file mode 100644 index 0000000000..1f984dd3db --- /dev/null +++ b/_pages/no_NO/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Sett inn SD-kortet i datamaskinen din +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Sett inn SD-kortet i konsollen igjen + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Trykk (Start) for å lagre og starte på nytt + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/no_NO/seedminer.txt b/_pages/no_NO/seedminer.txt index 41876b5992..5f5bd3d303 100644 --- a/_pages/no_NO/seedminer.txt +++ b/_pages/no_NO/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Sett inn SD-kortet i datamaskinen din 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/no_NO/site-navigation.txt b/_pages/no_NO/site-navigation.txt index 32459b70b2..6945aaeb71 100644 --- a/_pages/no_NO/site-navigation.txt +++ b/_pages/no_NO/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Populært** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donasjoner](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Kom i gang](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Hjem](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Flytt EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region bytte](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Feilsøking](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/no_NO/updating-b9s.txt b/_pages/no_NO/updating-b9s.txt index 09048dc17f..152465405e 100644 --- a/_pages/no_NO/updating-b9s.txt +++ b/_pages/no_NO/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Sett inn SD-kortet i datamaskinen din -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Slå av enheten 1. Sett inn SD-kortet i datamaskinen din -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Sett inn SD-kortet i konsollen igjen 1. Power on your device diff --git a/_pages/pl_PL/a9lh-to-b9s.txt b/_pages/pl_PL/a9lh-to-b9s.txt index 789f57ee65..b5ee0ef2c6 100644 --- a/_pages/pl_PL/a9lh-to-b9s.txt +++ b/_pages/pl_PL/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ Aby użyć linków [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) zamies Aby wyodrębnić pliki `.7z` załączone na tej stronie, będziesz potrzebować archiwizatora plików, na przykład [7-Zip](http://www.7-zip.org/) lub [The Unarchiver](https://theunarchiver.com/). -Jeśli korzystasz z PIN'u do Luma3DS, SafeB9SInstaller będzie pokazywać błąd "OTP Crypto Fail" dopóki nie wyłączysz tymczasowo swojego PIN (możesz ponownie włączyć PIN po aktualizacji). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -Były zgłaszane raporty fal banów dla użytkowników CFW od Nintendo. Aby ochronić się, wykonaj poniższe kroki przed rozpoczęciem poradnika: - -1. Wejdź do System Settings, następnie do "Internet Settings", "SpotPass", i "Sending of System Information" -1. Wyłącz opcję "Sending of System Information" -1. Wyjdź z System Settings -1. Wejdź do Listy Znajomych (pomarańczowa ikona twarzy)({{ "/images/friend-list-icon.png" | absolute_url }}) w górnej linii Home menu - + Jeśli wyświetli się błąd i zostaniesz wyrzucony z menu, lista znajomych jest albo już wyłączona lub twoja konsola nie może się połączyć z serwerami Nintendo (przez bana lub problemy z połączeniem) -1. Wejdź do ustawień Listy Znajomych, potem "Friend Notification Settings", potem "Show friends what you're playing" -1. Wyłącz opcję "Show friends what you're playing" -1. Wyjdź z Listy Znajomych - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### Czego Potrzebujesz Plik o nazwie `secret_sector.bin`, który poźniej będzie potrzebny, jest tym samym plikiem który znajduje się w rożnych wersjach pliku `data_input.zip`. Jeśli masz już ten plik na dysku, możesz go użyć zamiast ponownie go pobierać. @@ -42,11 +26,10 @@ Na New 3DSie plik `secret_sector.bin` jest potrzebny aby cofnąć exploit arm9lo {: .notice--info} * - **Tylko dla New 3DS:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Wersji v7.0.5 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(pliku `.7z`)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standardowa instalacja; nie `devkit` czy plik `ntr`)* -* Najnowszej wersji [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instrukcje @@ -57,8 +40,7 @@ Wykonując wszystkie kroki opisane w tej sekcji, zastąp istniejące pliki na ka 1. Wyłącz konsolę 1. Włóż kartę SD do komputera -1. Skopiuj plik `boot.3dsx` do katalogu głównego karty SD -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Skopiuj `arm9loaderhax.bin` z Luma3DS `.7z` v7.0.5 do katalogu głównego karty SD 1. Usuń wszystkie pliki `.bin` z folderu `/luma/payloads/` na karcie SD, ponieważ nie będą one kompatybilne z wersjami Luma3DS kompatybilnymi z boot9strap 1. Skopiuj `SafeB9SInstaller.bin` z SafeB9SInstaller `.zip` do folderu `/luma/payloads/` na karcie SD diff --git a/_pages/pl_PL/bannerbomb3.txt b/_pages/pl_PL/bannerbomb3.txt index 3de69a3d4e..15de4fd53d 100644 --- a/_pages/pl_PL/bannerbomb3.txt +++ b/_pages/pl_PL/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Spis Treści" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Wymagana Lektura To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/pl_PL/checking-for-cfw.txt b/_pages/pl_PL/checking-for-cfw.txt new file mode 100644 index 0000000000..252e877f65 --- /dev/null +++ b/_pages/pl_PL/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instrukcje + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/pl_PL/credits.txt b/_pages/pl_PL/credits.txt index 120809634d..75586ad734 100644 --- a/_pages/pl_PL/credits.txt +++ b/_pages/pl_PL/credits.txt @@ -2,6 +2,9 @@ title: "Współautorzy" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Specjalne podziękowania dla wszystkich z [#Cakey na Freenode](http://webchat.freenode.net/?channels=%23Cakey) za ich pracę!** {: .notice--primary} @@ -22,7 +25,7 @@ Jeśli zapomniałem tu o tobie, skontaktuj się ze mną a dodam twoje imię do l + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Jeśli zapomniałem tu o tobie, skontaktuj się ze mną a dodam twoje imię do l + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Jeśli zapomniałem tu o tobie, skontaktuj się ze mną a dodam twoje imię do l + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/pl_PL/dsidumper.txt b/_pages/pl_PL/dsidumper.txt index d9389ae990..9762798a6c 100644 --- a/_pages/pl_PL/dsidumper.txt +++ b/_pages/pl_PL/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Spis Treści" %} - -### Wymagana Lektura - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### Czego Potrzebujesz - -* Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Sekcja I - Przygotowanie - -1. Wyłącz konsolę -1. Włóż kartę SD do komputera -1. Skopiuj plik `movable.sed` do katalogu głównego karty SD -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Włóż ponownie kartę SD do konsoli -1. Włącz konsolę - -#### Section II - DSiWare Dumping - -1. Otwórz Homebrew Launcher używając jakiejkolwiek metody -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pl_PL/faq.txt b/_pages/pl_PL/faq.txt index a39308b571..bc28c87962 100644 --- a/_pages/pl_PL/faq.txt +++ b/_pages/pl_PL/faq.txt @@ -6,7 +6,7 @@ title: "Często zadawane pytania (FAQ)" **Odp.:** Tak **Pyt.:** *Jak zaktualizować Luma3DS?* -**Odp:** Użyj [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Pyt.:** *Słyszałem o tych płatnych rzeczach (Gateway, Sky3DS, itp.). Czy naprawdę tego potrzebuję?* **Odp.:** Nie. boot9strap jest lepszą metodą ładowania hax, który działa na wczesnym etapie uruchomienia konsoli. diff --git a/_pages/pl_PL/finalizing-setup.txt b/_pages/pl_PL/finalizing-setup.txt index 4fb68b53e0..f183fb3372 100644 --- a/_pages/pl_PL/finalizing-setup.txt +++ b/_pages/pl_PL/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizowanie Instalacji" `boot.firm` to plik, który jest uruchamiany przez boot9strap po wczytaniu NANDu, i może być każdym payload'em w formacie FIRM. Plik ten może być podmieniony w każdej chwili, jednak Luma3DS pozwala na uruchomienie innych payload'ów arm9 w formacie FIRM używając Chainloadera Luma3DS. -W naszym przypadku, używamy Luma3DS autorstwa [AuroraWright](https://github.com/AuroraWright/) do bezpośredniego uruchomienia zmodyfikowanego SysNAND, co pozwala na zupełną rezygnację z korzystania z EmuNAND i znacznie upraszcza obsługę przerobionego 3DS'a oraz zużywa znacznie mniej miejsca na karcie SD. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Podczas tego procesu zainstalujemy również takie programy jak: + **FBI** *(instaluje gry i programy w formacie CIA)* + **Anemone3DS** *(instaluje niestandardowe motywy)* + **Checkpoint** *(tworzenie kopii zapasowych gier 3DS i DS oraz ich przywracanie)* -+ **Luma3DS Updater** *(narzędzie do łatwej aktualizacji twojego CFW)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(wielozadaniowe narzędzie do NAND i kartridżów)* + **Homebrew Launcher Loader** *(uruchamia Homebrew Launcher)* + **DSP1** *(pozwala aplikacjom homebrew korzystać z dźwięku)* @@ -25,12 +25,12 @@ Podczas tego procesu zainstalujemy również takie programy jak: * Najnowszej wersji [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(pliku `.cia`)* * Najnowszej wersji [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(pliku `.cia`)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * Najnowszej wersji [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* Najnowszej wersji [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * Najnowszej wersji [FBI](https://github.com/Steveice10/FBI/releases/latest) *(pliki `.cia` oraz `.3dsx`)* * Najnowszej wersji [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* Najnowszej wersji [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(pliku `.cia`)* ### Instrukcje @@ -39,15 +39,16 @@ Podczas tego procesu zainstalujemy również takie programy jak: 1. Wyłącz konsolę 1. Włóż kartę SD do komputera 1. Stwórz folder o nazwie `3ds` w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Stwórz folder o nazwie `cias` w katalogu głównym karty SD, jeśli jeszcze nie istnieje 1. Skopiuj `ctr-no-timeoffset.3dsx` do folderu `/3ds/` na twojej karcie SD 1. Skopiuj `FBI.3dsx` do folderu `/3ds/` na karcie SD 1. Skopiuj `Homebrew_Launcher.cia` do folderu `/cias/` na karcie SD -1. Skopiuj `lumaupdater.cia` do folderu `/cias/` na karcie SD 1. Skopiuj `FBI.cia` do folderu `/cias/` na karcie SD 1. Skopiuj `DSP1.cia` do folderu `/cias/` na karcie SD 1. Skopiuj `Anemone3DS.cia` do folderu `/cias/` na karcie SD 1. Skopiuj `Checkpoint.cia` do folderu `/cias/` na karcie SD +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Stwórz folder o nazwie `payloads` w folderze `luma` na twojej karcie SD jeśli nie istnieje 1. Skopiuj `GodMode9.firm` z archiwum `.zip` GodMode9 do folderu `/luma/payloads/` na twojej karcie SD 1. Skopiuj folder `gm9` z GodMode9 `.zip` do katalogu głównego na karcie SD @@ -102,7 +103,7 @@ Jeśli przed rozpoczęciem tego poradnika już miałeś skonfigurowane EmuNAND i #### Sekcja VI - CTRNAND Luma3DS 1. Wyłącz konsolę -1. Uruchom GodMode9 poprzez trzymanie przycisku (Start) podczas uruchamiania konsoli +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Jeśli zostaniesz poproszony o utworzenie kopii zapasowej niezbędnych plików, naciśnij (A) aby to zrobić, po czym naciśnij (A) aby kontynuować po ich skopiowaniu 1. Jeśli zostaniesz poproszony o ustawienie czasu RTC, naciśnij (A) aby to zrobić, następnie ustaw datę i czas, oraz naciśnij (A) aby kontynuować 1. Wciśnij (Home), aby przywołać menu akcji @@ -150,18 +151,8 @@ ___ #### Uwagi i Informacje -{% capture notice-10 %} -Teraz możesz używać Luma3DS Updater aby aktualizować Luma3DS do najnowszej wersji, wystarczy go uruchomić i nacisnąć (A). - -To nie jest to samo co System Update; Luma3DS Updater pobiera i wypakowuje wyłącznie najnowsze pliki Luma3DS. - -To zaktualizuje pliki Luma3DS na Twojej karcie SD oraz w CTRNAND, z którego uruchamia się konsola jeżeli nie ma włożonej karty SD. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Teraz Luma3DS CFW SysNAND będzie uruchamiany domyślnie. +You will now boot Luma3DS CFW by default. Możesz dostać się do menu konfiguracji Luma3DS, przytrzymując (Select) podczas uruchamiania konsoli. @@ -177,7 +168,7 @@ Możesz teraz nacisnąć (L) + (Dół) + (Select) kiedy system jest uruchomiony {% capture notice-6 %} Jeśli chcesz zmienić swoją kartę SD na większą, wystarczy, że sformatujesz ją (nową) jako FAT32 i wkleisz do niej zawartość poprzedniej karty SD. -Jeśli twoja nowa karta SD jest większa niż 32GB, musisz użyć innego narzędzia, aby ją ją sformatować, na przykład: [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) dla Windows, [gparted](http://gparted.org/download.php) dla Linuxa, lub [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) dla Mac'a. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Aby uzyskać informacje na temat korzystania z różnych funkcji GodMode9, spraw Aby uzyskać informacje o użytkowaniu różnych funkcji Luma3DS, odwiedź [jej wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -Aby uzyskać informacje na temat instalowania niestandardowych motywów i ekranów powitalnych, sprawdź [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/pl_PL/flashing-ntrboot-(3ds-multi-system).txt b/_pages/pl_PL/flashing-ntrboot-(3ds-multi-system).txt index e06343ce95..da5ef0554a 100644 --- a/_pages/pl_PL/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/pl_PL/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Zauważ, że w niektórych rzadkich przypadkach proces wgrywania ntrboot na podr * Dwóch urządzeń z rodziny 3DS + **Źródłowego 3DS'a**: urządzenie z rodziny 3DS na którym jest już zainstalowany boot9strap + **Docelowego 3DS'a**: urządzenie na oryginalnym oprogramowaniu sprzętowym -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( plik`ntr` boot9strap; nie `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * Najnowszej wersji [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instrukcje diff --git a/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt b/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt index 0859bb2844..1aef1f53dc 100644 --- a/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Zauważ, że w niektórych rzadkich przypadkach proces wgrywania ntrboot na podr ### Czego Potrzebujesz * Twojego kompatybilnego z ntrboot flashcarta DS / DSi -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( plik`ntr` boot9strap; nie `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * Najnowszej wersji [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instrukcje diff --git a/_pages/pl_PL/flashing-ntrboot-(nds).txt b/_pages/pl_PL/flashing-ntrboot-(nds).txt index 754e712d57..bb48943faa 100644 --- a/_pages/pl_PL/flashing-ntrboot-(nds).txt +++ b/_pages/pl_PL/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Zauważ, że w niektórych rzadkich przypadkach proces wgrywania ntrboot na podr * Dwóch urządzeń + **Źródłowego NDS / NDSL**: konsola Nintendo DS lub DS Lite kompatybilna z twoim flashcartem + **Docelowego 3DS'a**: urządzenia na oryginalnym oprogramowaniu sprzętowym -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( plik`ntr` boot9strap; nie `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * Najnowszej wersji [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instrukcje diff --git a/_pages/pl_PL/formatting-sd-(linux).txt b/_pages/pl_PL/formatting-sd-(linux).txt new file mode 100644 index 0000000000..36e45a967a --- /dev/null +++ b/_pages/pl_PL/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Ta strona dotyczy tylko użytkowników systemu Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instrukcje +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/pl_PL/formatting-sd-(mac).txt b/_pages/pl_PL/formatting-sd-(mac).txt new file mode 100644 index 0000000000..da9ec0959b --- /dev/null +++ b/_pages/pl_PL/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Ta strona dotyczy tylko użytkowników systemu Mac. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instrukcje + +#### OS X El Capitan (10.11) and later + +1. Włóż kartę SD do komputera +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Włóż kartę SD do komputera +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/pl_PL/formatting-sd-(windows).txt b/_pages/pl_PL/formatting-sd-(windows).txt new file mode 100644 index 0000000000..10a9f99dc7 --- /dev/null +++ b/_pages/pl_PL/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Ta strona dotyczy tylko użytkowników systemu Windows. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Czego Potrzebujesz + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instrukcje + +1. Włóż kartę SD do komputera +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/pl_PL/get-started-(new-3ds).txt b/_pages/pl_PL/get-started-(new-3ds).txt index 88e1915d51..5762d359c5 100644 --- a/_pages/pl_PL/get-started-(new-3ds).txt +++ b/_pages/pl_PL/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Wprowadzenie (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="Spis Treści" %} ### Wymagana Lektura -Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli. Pola "od" oraz "do" są włączne dla wersji. To oznacza, przykładowo, iż wiersz "od 9.0.0 do 9.2.0" zawiera wersje firmware 9.0.0, 9.1.0 oraz 9.2.0. - -Zauważ że ostatnia cyfra twojej wersji systemu (poprzedzona myślnikiem) odpowiada wersji przeglądarki internetowej konsoli. Obecnie wersja przeglądarki nie ma znaczenia w odniesieniu dla New 3DS w tym poradniku. - -**Jeśli nie możesz wykonać instrukcji odpowiadających konkretnej wersji z powodu niespełnienia wymagań, powinieneś zobaczyć wiersz "Wszystkie wersje" dla metod, które działają niezależnie od wersji systemu.** - -Dla wszystkich wersji możesz wykonać również [Aktualizację z Kartridża](cart-update) (lub użyć standardowej aktualizacji systemu), aby uzyskać wyższą wersję w tej samej kolumnie, zgodnie z instrukcjami. +Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli. Pola "od" oraz "do" są włączne dla wersji. Wersja twojej konsoli jest widoczna w prawym dolnym rogu górnego ekranu System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Tabela wersji - + - - - + + + - - - - - - - - - - - + - + - + - - + + - - - + + - +
OdDoOdDoAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.0Instalacja boot9strap (Soundhax)
9.0.01.0.0 11.3.0Homebrew Launcher (Soundhax)Installing boot9strap (Soundhax)
11.4.011.7.0Użyj metody "Wszystkie wersje"11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Instalacja boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
WSZYSTKIE WERSJE

ntrboot
(Wymagany kompatybilny Flashcart)

lub

Instalacja boot9strap (Hardmod)
(Wymagana umiejętność lutowania)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/pl_PL/get-started-(old-3ds).txt b/_pages/pl_PL/get-started-(old-3ds).txt index d7f5a0ecc6..daf880b528 100644 --- a/_pages/pl_PL/get-started-(old-3ds).txt +++ b/_pages/pl_PL/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "Wprowadzenie (Old 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="Spis Treści" %} ### Wymagana Lektura -Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli. Pola "od" oraz "do" są włączne dla wersji. To oznacza, przykładowo, iż wiersz "od 9.0.0 do 9.2.0" zawiera wersje firmware 9.0.0, 9.1.0 oraz 9.2.0. - -Ostatnie dwie kolumny tabeli dotyczą ostatniego numeru twojej wersji softu (która odpowiada wersji wbudowanej przeglądarki internetowej). Jeżeli ta wersja to -0 znaczy to, że nie posiadasz przeglądarki, każda cyfra powyżej -0 oznacza zainstalowaną przeglądarkę internetową. - -Na przykładzie wersji "5.0.0-0U": wziąłbyś pod uwagę kolumnę "Brak przeglądarki" oraz wiersz "5.0.0 do 5.1.0" ponieważ konsola ma wersję softu zawierającą się w tym przedziale i nie ma na niej przeglądarki. - -**Jeśli nie możesz wykonać instrukcji odpowiadających konkretnej wersji z powodu niespełnienia wymagań, powinieneś zobaczyć wiersz "Wszystkie wersje" dla metod, które działają niezależnie od wersji systemu.** - -Dla wszystkich wersji możesz wykonać również [Aktualizację z Kartridża](cart-update) (lub użyć standardowej aktualizacji systemu), aby uzyskać wyższą wersję w tej samej kolumnie, zgodnie z instrukcjami. +Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli. Pola "od" oraz "do" są włączne dla wersji. Wersja twojej konsoli jest widoczna w prawym dolnym rogu górnego ekranu System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Tabela wersji @@ -33,49 +28,23 @@ Wersja twojej konsoli jest widoczna w prawym dolnym rogu górnego ekranu System - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
Od DoBrak przeglądarkiPrzeglądarkaAction
1.0.02.0.0Użyj metody "Wszystkie wersje"
2.1.02.1.0Użyj metody "Wszystkie wersje"Installing boot9strap (2xrsa)
2.2.02.2.0Użyj metody "Wszystkie wersje"
3.0.08.1.0Instalacja boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Użyj metody "Wszystkie wersje"Installing boot9strap (Soundhax)
11.8.011.8.0Instalacja boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
WSZYSTKIE WERSJE

ntrboot
(Wymagany kompatybilny Flashcart)

lub

Instalacja boot9strap (Hardmod)
(Wymagana umiejętność lutowania)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/pl_PL/get-started.txt b/_pages/pl_PL/get-started.txt index 39f75e2b2a..25470568be 100644 --- a/_pages/pl_PL/get-started.txt +++ b/_pages/pl_PL/get-started.txt @@ -6,85 +6,16 @@ title: "Wprowadzenie" ### Wymagana Lektura -Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli. Pola "od" oraz "do" są włączne dla wersji. To oznacza, przykładowo, iż wiersz "od 9.0.0 do 9.2.0" zawiera wersje firmware 9.0.0, 9.1.0 oraz 9.2.0. - -Wersja twojej konsoli jest widoczna w prawym dolnym rogu górnego ekranu System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**Jeśli nie możesz wykonać instrukcji odpowiadających konkretnej wersji z powodu niespełnienia wymagań, zaktualizuj system do najnowszej wersji, lub spójrz na wiersz "Wszystkie wersje" dla metod, które działają niezależnie od wersji systemu.** - -Dla wszystkich wersji możesz wykonać również [Aktualizację z Kartridża](cart-update) (lub użyć standardowej aktualizacji systemu), aby uzyskać wyższą wersję w tej samej kolumnie, zgodnie z instrukcjami. - -Jeżeli przerobiłeś już wcześniej swojego 3DSa i masz obecnie konfigurację CFW z EmuNAND, wykonuj następne kroki używając SysNAND. Zastąp wszystkie pliki, które już istnieją. Twoje dane zostaną przeniesione z EmuNAND do twojej nowej instalacji B9S. Jeśli używasz menuhax, powinieneś [wyczyścić dodatkowe dane Home Menu](troubleshooting#clear-home-menu-extdata), aby usunąć je przed rozpoczęciem. - -Ta strona jest na instrukcje jak zainstalować boot9strap na 3DS-ie lub 2DS-ie korzystającym z oryginalnego oprogramowania układowego. Jeżeli już masz zainstalowany arm9loaderhax i szukasz aktualizacji do boot9strap, zobacz [A9LH do B9S](a9lh-to-b9s). -{: .notice--primary} - -Przed rozpoczęciem, użytkownicy Windowsa powinni włączyć opcje pokazywania rozszerzeń plików [Rozszerzenia Plików (Windows)](file-extensions-(windows))! -{: .notice--info} - -Zanim rozpoczniesz, zastanów się nad sprawdzeniem swojej karty SD pod kątem błędów, przy użyciu programu [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), lub [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Tabela wersji - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
OdDoAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
WSZYSTKIE WERSJE

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/pl_PL/godmode9-usage.txt b/_pages/pl_PL/godmode9-usage.txt index 931408e338..2b873ee571 100644 --- a/_pages/pl_PL/godmode9-usage.txt +++ b/_pages/pl_PL/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "Używanie GodMode9" {% include toc title="Spis Treści" %} -Aby uzyskać pomoc (w języku angielskim) dotyczącą programu GodMode9, a także pomoc w pisaniu skryptów oraz uzyskiwaniu aktualizacji i informacji, dołącz do serwera [GodMode9 Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Wymagana Lektura diff --git a/_pages/pl_PL/home.txt b/_pages/pl_PL/home.txt index f2c16e350d..978fa08084 100644 --- a/_pages/pl_PL/home.txt +++ b/_pages/pl_PL/home.txt @@ -63,7 +63,7 @@ Aby zobaczyć pełną listę podpisów sighax, zobacz [ten gist](https://gist.gi ## Co mogę zrobić z Custom Firmware? + Grać we wszystkie gry, zarówno z kartridżów, jak i wersje eShop, niezależnie od regionu -+ Personalizować swoje menu HOME dzięki stworzonym przez użytkowników [motywom i ekranom powitalnym](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Używać "ROM hacków" dla gier, które posiadasz + Wykonywać zrzuty ekranu gier oraz aplikacji + Tworzyć kopie zapasowe, edytować i przywracać zapisy wielu gier @@ -78,11 +78,11 @@ Aby zobaczyć pełną listę podpisów sighax, zobacz [ten gist](https://gist.gi + **Przed rozpoczęciem wykonywania instrukcji, musisz znać zagrożenia przerabiania Nintendo 3DS: przy KAŻDEJ modyfikacji systemu istnieje potencjalne ryzyko NIEODWRACALNEGO BRICK'A. Są one rzadkie, ale nadal możliwe, więc upewnij się, że wykonałeś WSZYSTKIE kroki DOKŁADNIE.** + Jeśli już wcześniej przerobiłeś swoją konsolę używając EmuNAND, i chcesz przenieść jego zawartość na twój nowy SysNAND CFW, postępuj zwyczajnie według tego poradnika i przenieś swój istniejący EmuNAND, kiedy zostaniesz o to zapytany w rozdziale [Finalizowanie Instalacji](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Jeśli wszystko pójdzie zgodnie z planem, nie stracisz żadnych danych i wszystko pozostanie tak, jak przed rozpoczęciem poradnika (gry, NNID, zapisy itp. zostaną zachowane). + Pozostaw swoją konsolę podłączoną do ładowarki i naładowaną podczas całego procesu, aby nie dopuścić do utraty danych, lub uszkodzenia spowodowanego niespodziewanym wyłączeniem konsoli! + Tabelą partycji twojej karty SD powinien być [MBR, nie GPT](http://www.howtogeek.com/245610/) (karta SD, która przychodzi z twoim urządzeniem będzie domyślnie w MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ Jeśli potrzebujesz sformatować nowo zakupioną kartę SD, możesz użyć [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) i ustawić rozmiar jednostki alokacji (Allocation Unit Size) na 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + Old 2DS jest niemal identyczny jak Old 3DS pod względem oprogramowania, podczas gdy New 2DS jest zasadniczo identyczny jak New 3DS nowy pod względem oprogramowania. Kroki które mówią o "Old 3DS" można śmiało zastosować do Old 2DS, zaś wszystkie kroki opisane jako "New 3DS" pasują również do New 2DS. ___ diff --git a/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt b/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt index 7f1916ac5d..487f25a45c 100644 --- a/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Spis Treści" %} - -### Wymagana Lektura - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### Czego Potrzebujesz - -* Najnowszej wersji [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instrukcje - -#### Sekcja I - Przygotowanie - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Poczekaj na zakończenie procesu - + If it displays a yellow screen, power your console off, then try this section again -1. Jeśli Soundhax zadziałał, uruchomi się Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pl_PL/homebrew-launcher-(pichaxx).txt b/_pages/pl_PL/homebrew-launcher-(pichaxx).txt index 1f3c97426c..54dc87f6df 100644 --- a/_pages/pl_PL/homebrew-launcher-(pichaxx).txt +++ b/_pages/pl_PL/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Spis Treści" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Wymagana Lektura This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer) * Najnowszej wersji [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instrukcje @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Skopiuj plik `boot.3dsx` do katalogu głównego twojej karty SD 1. Skopiuj pobrany plik otherapp payload do katalogu głównego twojej karty SD i zmień jego nazwę na `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Stwórz folder o nazwie `3ds` w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Wybierz swój plik `movable.sed` 1. Select "Build and Download" 1. Poczekaj na zakończenie procesu 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + Twoje `` będzie takie samo jak te użyte przez Ciebie w [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Jeśli zostaniesz o to poproszony, nadpisz stary plik zapisu 1. Włóż ponownie kartę SD do konsoli 1. Włącz konsolę 1. Launch "Pokemon Picross" 1. Jeśli Soundhax zadziałał, uruchomi się Homebrew Launcher - + Możesz zobaczyć błąd informujący o braku aplikacji. -1. Wyłącz konsolę. + + You may see an error stating there are no applications found +1. Wyłącz konsolę ___ diff --git a/_pages/pl_PL/homebrew-launcher-(soundhax).txt b/_pages/pl_PL/homebrew-launcher-(soundhax).txt index 8f34a6c571..407db7de95 100644 --- a/_pages/pl_PL/homebrew-launcher-(soundhax).txt +++ b/_pages/pl_PL/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Upewnij się że "Wireless Communication" (wifi) twojej konsoli jest włączone, Zapamiętaj że aktualizacje z kartridżów dostarczą aktualizacje tylko do głównych funkcji, takich jak Ustawienia Systemowe, Menu Główne, itd. aktualizacje z kartridżów nie dostarczą aktualizacji do Nintendo 3DS Sound i funkcji sieciowych, takich jak Transfer Systemu, Przeglądarka Internetowa, Streetpass Mii Plaza, lub eShop. -To oznacza że użycie aktualizacji z kartridża posiadając starszą wersje Nintendo 3DS Sound *(<3.0.0)* do wersji która dodała nowszą wersje Nintendo 3DS Sound zepsuje Soundhax! Będziesz potrzebował [alternatywnej metody](homebrew-launcher-(alternatives)) wchodzenia do Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Będziesz potrzebował [alternatywnej metody](homebrew-launcher-(alternatives)) wchodzenia do Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ To oznacza że użycie aktualizacji z kartridża posiadając starszą wersje Nin ### Czego Potrzebujesz * Najnowszej wersji [Soundhax](http://soundhax.com/) *(dla twojego regionu, urządzenia i wersji systemu)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standardowa instalacja; nie `devkit` czy plik `ntr`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * Najnowszej wersji [safehax](https://github.com/TiniVi/safehax/releases/latest) *(pliku `.3dsx`)* * Najnowszej wersji [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* [payloadu otherapp](https://smealum.github.io/3ds/#otherapp) *(dla twojej konsoli i regionu)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instrukcje diff --git a/_pages/pl_PL/homebrew-launcher-(steelhax).txt b/_pages/pl_PL/homebrew-launcher-(steelhax).txt index 0500680b67..65ec1b9a69 100644 --- a/_pages/pl_PL/homebrew-launcher-(steelhax).txt +++ b/_pages/pl_PL/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Spis Treści" %} - -### Wymagana Lektura - -Ta metoda wykorzystuje twój uzyskany wcześniej plik `movable.sed` do uzyskania dostępu do Homebrew Launchera, wykorzystując exploit Steelhax, aby wprowadzić łatwą do zmodyfikowania aplikację DSiWare do DS Download Play. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -Jeżeli posiadasz już grę Steel Diver: Sub Wars, ten proces nadpisze Twoje zapisy gry! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### Czego Potrzebujesz - -* Gry "Steel Diver: Sub Wars" - dostępna na eShopie za darmo -* Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer) -* Najnowszej wersji [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instrukcje - -#### Sekcja I - Przygotowanie - -1. Stwórz folder o nazwie `3ds` w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje -1. Skopiuj plik `boot.3dsx` do katalogu głównego twojej karty SD -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Skopiuj pobrany plik otherapp payload do folderu `steelhax` na karcie SD i zmień jego nazwę na `payload.bin` - -#### Sekcja II - Steelminer - -1. Włóż kartę SD do konsoli -1. Uruchom "Steel Diver: Sub Wars" i wybierz postać Mii, aby zainicjować plik zapisu - + Jeśli zostaniesz o to poproszony, **anuluj** aktualizację gry - + Jeżeli przypadkowo zaktualizowałeś grę, użyj menu Data Management w System Settings, aby usunąć aktualizację -1. Wyjdź z gry "Steel Diver: Sub Wars" -1. Wyłącz konsolę -1. Włóż kartę SD do komputera -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Wybierz swój plik `movable.sed` -1. Wybierz "Start!" -1. Poczekaj na zakończenie procesu -1. Przejdź kolejno do katalogów na swojej karcie SD `Nintendo 3DS` -> `` -> `<32-znakowe-id>` -> `title` -> `00040000` -> `<8-znakowy-region>` -> `data` - + **Region EUR**: `000d7e00` - + **Region JPN**: `000d7c00` - + **Region USA**: `000d7d00` -1. Skopiuj świeżo pobrany plik zapisu gry do folderu `data` na karcie SD - + Jeśli zostaniesz o to poproszony, nadpisz stary plik zapisu -1. Włóż ponownie kartę SD do konsoli -1. Włącz konsolę -1. Uruchom "Steel Diver: Sub Wars" -1. Jeśli Soundhax zadziałał, uruchomi się Homebrew Launcher - + Możesz zobaczyć błąd informujący o braku aplikacji. -1. Wyłącz konsolę. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/pl_PL/installing-boot9strap-(2xrsa).txt b/_pages/pl_PL/installing-boot9strap-(2xrsa).txt index 87003f3d9b..08e8775073 100644 --- a/_pages/pl_PL/installing-boot9strap-(2xrsa).txt +++ b/_pages/pl_PL/installing-boot9strap-(2xrsa).txt @@ -18,7 +18,7 @@ title: "Instalacja boot9strap (2xrsa)" 1. Włóż kartę SD do komputera 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD -1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `/boot9strap/` na karcie SD +1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `boot9strap` na karcie SD 1. Skopiuj `arm9.bin` oraz `arm11.bin` z SafeB9SInstaller `.zip` do katalogu głównego karty SD ![]({{ "/images/screenshots/boot9strap-2xrsa-file-layout.png" | absolute_url }}) diff --git a/_pages/pl_PL/installing-boot9strap-(browser).txt b/_pages/pl_PL/installing-boot9strap-(browser).txt index c89bf8aae5..e0600b8c6e 100644 --- a/_pages/pl_PL/installing-boot9strap-(browser).txt +++ b/_pages/pl_PL/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Instalacja boot9strap (Przeglądarka)" {% include toc title="Spis Treści" %} +### Wymagana Lektura + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### Czego Potrzebujesz +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standardowa instalacja; nie `devkit` czy plik `ntr`)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrukcje @@ -16,24 +24,21 @@ title: "Instalacja boot9strap (Przeglądarka)" 1. Wyłącz konsolę 1. Włóż kartę SD do komputera +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD -1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `/boot9strap/` na karcie SD -1. Skopiuj `SafeB9SInstaller.dat` oraz `Launcher.dat` z SafeB9SInstaller `.zip` do katalogu głównego karty SD - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Włóż ponownie kartę SD do konsoli 1. Włącz konsolę #### Sekcja II - Uruchamianie SafeB9SInstaller -1. Otwórz przeglądarkę internetową na swojej konsoli, a następnie przejdź do jednego z następujących adresów URL - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Pamiętaj aby wypróbować każdy z adresów jeśli pierwszy nie działa (na niektórych wersjach nie działa pierwszy, a na niektórych pozostałe dwa) +1. Włącz konsolę +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + Jeśli pojawi się błąd, [przejdź do rozwiązywania problemów](troubleshooting#a-browser-based-exploit-is-not-working) 1. Jeśli operacja zakończyła się pomyślnie, uruchomi się SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Instalacja boot9strap (Przeglądarka)" 1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć: + **"Show NAND or user string in System Settings"** 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie - + Jeśli wyświetli się błąd po prostu kontynuuj ___ diff --git a/_pages/pl_PL/installing-boot9strap-(fredtool).txt b/_pages/pl_PL/installing-boot9strap-(fredtool).txt index 35e5520776..724161c8e2 100644 --- a/_pages/pl_PL/installing-boot9strap-(fredtool).txt +++ b/_pages/pl_PL/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Instalacja Boot9strap (Fredtool)" {% include toc title="Spis Treści" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Wymagana Lektura This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ To obecnie działająca implementacja luki: "FIRM partitions known-plaintext" sz ### Czego Potrzebujesz -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer) * Najnowszej wersji [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * Najnowszej wersji [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sekcja I - Przygotowanie @@ -28,18 +31,18 @@ To obecnie działająca implementacja luki: "FIRM partitions known-plaintext" sz #### Sekcja II - Fredtool -1. Otwórz [Fredtool](https://fredtool.bruteforcemovable.com/) na komputerze +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Wybierz swój plik `movable.sed` w polu "Your movable.sed" 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Wypełnij captcha "I'm not a robot" (nie jestem robotem) 1. Wybierz "Start" 1. Poczekaj na zakończenie procesu 1. Po zakończeniu procesu, pobierz zmodyfikowane archiwum DSiWare ze strony - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + Twoje `` będzie takie samo jak te użyte przez Ciebie w [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Włóż ponownie kartę SD do konsoli 1. Włącz konsolę @@ -87,7 +90,7 @@ Jeśli wolisz skorzystać z obrazkowego poradnika dotyczącego tej sekcji przejd 1. Wyłącz konsolę 1. Włóż kartę SD do komputera -1. Skopiuj plik `42383841.bin` z folderu `output/clean/` znajdującego się w archiwum DSiWare (`fredtool_output.zip`) do folderu `Nintendo 3DS//<32-znakowe-id>/Nintendo DSiWare/` na karcie SD +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Nadpisz istniejący plik `42383841.bin` 1. Włóż ponownie kartę SD do konsoli 1. Włącz konsolę diff --git a/_pages/pl_PL/installing-boot9strap-(frogtool).txt b/_pages/pl_PL/installing-boot9strap-(frogtool).txt index 686a533185..7addb3321f 100644 --- a/_pages/pl_PL/installing-boot9strap-(frogtool).txt +++ b/_pages/pl_PL/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Instalacja Boot9strap (Frogtool)" {% include toc title="Spis Treści" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Wymagana Lektura Użyjemy Homebrew Launchera w celu uruchomienia narzędzia Frogtool, aby podmienić obecne "Flipnote Studio" na Japońską wersję podatną na exploity, której użyjemy do uruchomienia b9sTool i zainstalowania boot9strap. @@ -18,14 +21,14 @@ Aby użyć linków [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) zamies * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * Najnowszej wersji [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * Najnowszej wersji [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sekcja I - Przygotowanie 1. Włóż kartę SD do komputera 1. Skopiuj plik `movable.sed` do katalogu głównego karty SD 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Skopiuj `Frogtool.3dsx` do folderu `/3ds/` na twojej karcie SD 1. Skopiuj plik `frogcert.bin` do katalogu głównego karty SD 1. Włóż ponownie kartę SD do konsoli @@ -74,6 +77,26 @@ Jeśli wolisz skorzystać z obrazkowego poradnika dotyczącego tej sekcji przejd 1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Uruchom aplikację "Download Play" (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Wybierz "Miscellaneous options" +1. Wybierz "Switch the hb. title to the current app." +1. Naciśnij (B) aby kontynuować +1. Naciśnij (B) aby powrócić do głównego menu Rosalina +1. Naciśnij (B) aby zamknąć menu Rosalina +1. Naciśnij (Home), a następnie zamknij aplikację Download Play +1. Relaunch the Download Play application +1. Twoja konsola powinna załadować Homebrew Launcher +1. Uruchom aplikację Frogtool z listy Homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) diff --git a/_pages/pl_PL/installing-boot9strap-(hardmod).txt b/_pages/pl_PL/installing-boot9strap-(hardmod).txt index 9e64f3bd6a..929913050b 100644 --- a/_pages/pl_PL/installing-boot9strap-(hardmod).txt +++ b/_pages/pl_PL/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ To zadziała na New 3DS, New 2DS, Old 3DS, i Old 2DS na *każdej* wersji oprogra * Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standardowa instalacja; nie `devkit` czy plik `ntr`)* * Najnowszej wersji programu [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Użytkownicy Windowsa mogą użyć skompilowanego pliku `.exe`, podczas gdy użytkownicy Mac'a i Linuxa muszą posiadać zainstalowany [Python 3](https://www.python.org/downloads/) aby uruchomić plik `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * Plik `.firm` odpowiedni dla twojego urządzenia i wersji oprogramowania: | Wersje | Kernel | Old 3DS lub Old 2DS | New 3DS lub New 2DS | diff --git a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt index be061145f6..a42d09cecd 100644 --- a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Spis Treści" %} - -### Wymagana Lektura - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Czego Potrzebujesz - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Sekcja I - Przygotowanie - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Sekcja III - Konfiguracja Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć: - + **"Show NAND or user string in System Settings"** -1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Uruchom aplikację Download Play -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Wybierz "Miscellaneous options" -1. Wybierz "Switch the hb. title to the current app." -1. Naciśnij (B) aby kontynuować -1. Naciśnij (B) aby powrócić do głównego menu Rosalina -1. Naciśnij (B) aby zamknąć menu Rosalina -1. Naciśnij (Home), a następnie zamknij aplikację Download Play -1. Relaunch the Download Play application -1. Twoja konsola powinna załadować Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt index 7f21f36718..624b5be77d 100644 --- a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt +++ b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ Aby użyć linków [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) zamies * Magnesu, który załącza sleep mode na twojej konsoli (jeśli używasz składany styl urządzenia) * Twojego flashcarta z wgranym ntrboot * Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standardowa instalacja; nie `devkit` czy plik `ntr`)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrukcje #### Sekcja I - Przygotowanie 1. Wyłącz konsolę -1. Włóż kartę SD do komputera +1. Insert your console's SD card into your computer + To karta SD twojego 3DS'a, *nie* karta SD z twojego flashcarta -1. Skopiuj `SafeB9SInstaller.firm` do katalogu głównego karty SD i zmień jego nazwę na `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD -1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `boot9strap` na karcie SD +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Włóż ponownie kartę SD do konsoli +1. Reinsert your SD card into your 3DS 1. Włącz konsolę #### Sekcja II - ntrboot diff --git a/_pages/pl_PL/installing-boot9strap-(pichaxx).txt b/_pages/pl_PL/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..f65199e5f0 --- /dev/null +++ b/_pages/pl_PL/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Spis Treści" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Wymagana Lektura + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### Czego Potrzebujesz + +* The game "Pokémon Picross" (free on eShop) +* Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer) +* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instrukcje + +#### Sekcja I - Przygotowanie + +1. Wyłącz konsolę +1. Włóż kartę SD do komputera +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD +1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `boot9strap` na karcie SD +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Wybierz swój plik `movable.sed` +1. Select "Build and Download" +1. Poczekaj na zakończenie procesu +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Jeśli zostaniesz o to poproszony, nadpisz stary plik zapisu +1. Włóż ponownie kartę SD do konsoli +1. Włącz konsolę +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Sekcja III - Instalacja boot9strap + +1. Poczekaj aż weryfikacja instalacji się zakończy +1. Kiedy zostaniesz poproszony, wprowadź podaną kombinację klawiszy aby zainstalować boot9strap +1. Po zakończeniu, naciśnij (A), aby ponownie uruchomić urządzenie + +#### Sekcja IV - Konfigurowanie Luma3DS + +1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS + + Jeśli wyświetli się pusty czarny ekran [przejdź do rozwiązywania problemów](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć: + + **"Show NAND or user string in System Settings"** +1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + + Jeśli wyświetli się błąd po prostu kontynuuj + +___ + +### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pl_PL/installing-boot9strap-(safecerthax).txt b/_pages/pl_PL/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..41f7fde376 --- /dev/null +++ b/_pages/pl_PL/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### Czego Potrzebujesz + +* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instrukcje + +#### Sekcja I - Przygotowanie +1. Wyłącz konsolę +1. Włóż kartę SD do komputera +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Włóż ponownie kartę SD do konsoli +1. Włącz konsolę + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Wyłącz konsolę + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. Jeśli operacja zakończyła się pomyślnie, uruchomi się SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Poczekaj aż weryfikacja instalacji się zakończy +1. Kiedy zostaniesz poproszony, wprowadź podaną kombinację klawiszy aby zainstalować boot9strap +1. Po zakończeniu, naciśnij (A), aby ponownie uruchomić urządzenie + +#### Section V - Configuring Luma3DS + +1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS + + Jeśli wyświetli się pusty czarny ekran [przejdź do rozwiązywania problemów](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć: + + **"Show NAND or user string in System Settings"** +1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Wyłącz konsolę + +___ + +### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pl_PL/installing-boot9strap-(soundhax).txt b/_pages/pl_PL/installing-boot9strap-(soundhax).txt index e608a135b7..8de95cd447 100644 --- a/_pages/pl_PL/installing-boot9strap-(soundhax).txt +++ b/_pages/pl_PL/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Instalacja boot9strap (Soundhax)" ### Wymagana Lektura -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Zapamiętaj że aktualizacje z kartridżów dostarczą aktualizacje tylko do głównych funkcji, takich jak Ustawienia Systemowe, Menu Główne, itd. aktualizacje z kartridżów nie dostarczą aktualizacji do Nintendo 3DS Sound i funkcji sieciowych, takich jak Transfer Systemu, Przeglądarka Internetowa, Streetpass Mii Plaza, lub eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Będziesz potrzebował alternatywnej metody uruchomienia Homebrew Launcher, takiej jak [Instalacja boot9strap (Przeglądarka)](installing-boot9strap-(browser)) lub [Instalacja boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### Czego Potrzebujesz * Najnowszej wersji [Soundhax](http://soundhax.com/) *(dla twojego regionu, urządzenia i wersji systemu)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standardowa instalacja; nie `devkit` czy plik `ntr`)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Najnowszej wersji [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* Najnowszej wersji [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(pliku `.bin` zgodnego z Twoją wersją firmware)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instrukcje @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Wyłącz konsolę 1. Włóż kartę SD do komputera 1. Skopiuj Soundhax `.m4a` do głównego katalogu twojej karty SD -1. Skopiuj plik pre9otherapp payload do katalogu głównego twojej karty SD i zmień jego nazwę na `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Skopiuj plik `boot.3dsx` do katalogu głównego karty SD +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD -1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `/boot9strap/` na karcie SD -1. Skopiuj `arm9.bin` z SafeB9SInstaller `.zip` do katalogu głównego karty SD +1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `boot9strap` na karcie SD +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Włóż ponownie kartę SD do konsoli 1. Włącz konsolę @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + Jeśli tego nie zrobisz i uruchomisz Soundhax od razu, będziesz dostawał papuzie porady przy każdym uruchomieniu aplikacji Nintendo 3DS Sound dopóki ich nie dokończysz 1. Przejdź do `/SDCARD`, następnie odtwórz "<3 nedwill 2016" + Może to wymagać wielu prób - + Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/pl_PL/installing-boot9strap-(ssloth-browser).txt b/_pages/pl_PL/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..b548fe4bf6 --- /dev/null +++ b/_pages/pl_PL/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### Czego Potrzebujesz + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Sekcja I - Przygotowanie + +1. Wyłącz konsolę +1. Włóż kartę SD do komputera +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Włóż ponownie kartę SD do konsoli +1. Włącz konsolę + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Wyłącz konsolę + +#### Section III - Launching SafeB9SInstaller +1. Włącz konsolę +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Jeśli pojawi się błąd, [przejdź do rozwiązywania problemów](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. Jeśli operacja zakończyła się pomyślnie, uruchomi się SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Poczekaj aż weryfikacja instalacji się zakończy +1. Kiedy zostaniesz poproszony, wprowadź podaną kombinację klawiszy aby zainstalować boot9strap +1. Po zakończeniu, naciśnij (A), aby ponownie uruchomić urządzenie + +#### Section V - Configuring Luma3DS + +1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS + + Jeśli wyświetli się pusty czarny ekran [przejdź do rozwiązywania problemów](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć: + + **"Show NAND or user string in System Settings"** +1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Wyłącz konsolę + +___ + +### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/pl_PL/installing-boot9strap-(usm).txt b/_pages/pl_PL/installing-boot9strap-(usm).txt index baef548f99..0cd55e80dd 100644 --- a/_pages/pl_PL/installing-boot9strap-(usm).txt +++ b/_pages/pl_PL/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Spis Treści" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Wymagana Lektura In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### Czego Potrzebujesz * Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Sekcja I - Przygotowanie -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Włóż kartę SD do komputera 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Przejdź kolejno do katalogów `Nintendo 3DS` -> `` -> `<32-znakowe-id>` -> `Nintendo DSiWare` na karcie SD - + Twoje `` będzie takie samo jak te użyte przez Ciebie w [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Sekcja IV - Konfigurowanie Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Przejdź do `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Wyłącz konsolę 1. Włóż kartę SD do komputera -1. Przejdź kolejno do katalogów `Nintendo 3DS` -> `` -> `<32-znakowe-id>` -> `Nintendo DSiWare` na karcie SD - + Twoje `` będzie takie samo jak te użyte przez Ciebie w [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/pl_PL/legacy-methods.txt b/_pages/pl_PL/legacy-methods.txt index 81133d92d9..5c55c30526 100644 --- a/_pages/pl_PL/legacy-methods.txt +++ b/_pages/pl_PL/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### Test DS Internet Settings (używany do Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/pl_PL/ntrboot.txt b/_pages/pl_PL/ntrboot.txt index 837a8c4fea..8d0b9c38a6 100644 --- a/_pages/pl_PL/ntrboot.txt +++ b/_pages/pl_PL/ntrboot.txt @@ -17,23 +17,23 @@ Zauważ, że flashcarty z "Time Bomb" nie będą w stanie uruchamiać plików `. | Nazwa Flashcarta | Aktualna Cena | "Time Bomb"? | Wersje 3DS'a? | Wersje DSi? | Inne Uwagi | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | Nie | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Modele 2013 nie są kompatybilne. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Modele 2013 nie są kompatybilne. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Modele 2013 nie są kompatybilne. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Modele 2013 nie są kompatybilne. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | Nie | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | Nie | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | Nie | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | Nie | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/pl_PL/region-changing.txt b/_pages/pl_PL/region-changing.txt index 0b2ee58e9a..c62c54208c 100644 --- a/_pages/pl_PL/region-changing.txt +++ b/_pages/pl_PL/region-changing.txt @@ -17,7 +17,7 @@ Zauważ, że jeżeli będziesz miał pliki inne niż `GodMode9.firm` w folderze Ten proces odłączy twój NNID od konsoli, ponieważ po zmianie regionu nie będzie z nią dłużej kompatybilny. NNID są przypisane do regionu konsoli w którym zostały utworzone i nie mogą być przenoszone między regionami bez [bardzo złożonej i zaawansowanej procedury](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -Po zakończeniu tej procedury, wyłącznie **New 3DS, na którym nigdy wcześniej nie był uruchamiany eShop** oraz **każdy Old 3DS** będą miały dostęp do eShop po utworzeniu nowego NNID w ich nowym regionie. New 3DS, na którym został uruchomiony eShop chociaż raz w swoim ojczystym regionie, nie będzie mógł utworzyć nowego NNID oraz skorzystać z eShop w nowym regionie! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Należy zaznaczyć, że sporadycznie, z nieznanych przyczyn eShop nie działa nawet na konsolach, na których powinien. Jest to całkowicie po stronie serwerów Nintendo, i naprawdę nie mam nad tym żadnej kontroli. Ponadto należy zauważyć, że od czasu do czasu eShop w niewytłumaczalny sposób zadziała na urządzeniach na, których nie powinien (np. niektóre New 3DS). Przyczyna tego jest obecnie nieznana. @@ -55,12 +55,34 @@ MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać. 1. Skopiuj `FBI.3dsx` do folderu `/3ds/` na karcie SD 1. Włóż kartę SD do konsoli -#### Sekcja II - CTRTransfer - +#### Section II - NAND Backup 1. Uruchom GodMode9 poprzez trzymanie przycisku (Start) podczas uruchamiania konsoli 1. Jeśli zostaniesz poproszony o utworzenie kopii zapasowej niezbędnych plików, naciśnij (A) aby to zrobić, po czym naciśnij (A) aby kontynuować po zakończeniu 1. Jeśli zostaniesz poproszony o ustawienie czasu RTC, naciśnij (A) aby to zrobić, następnie ustaw datę i czas, oraz naciśnij (A) aby kontynuować + Pamiętaj, że, jeśli musiałeś ustawić datę i czas RTC, będziesz musiał ustawić je w Ustawieniach Systemu po skończeniu tego poradniku +1. Wciśnij (Home), aby przywołać menu akcji +1. Wybierz "Scripts..." +1. Wybierz "GM9Megascript" +1. Wybierz "Backup Options" +1. Wybierz "SysNAND Backup" +1. Naciśnij (A) by potwierdzić + + Ten proces zajmie trochę czasu + + Jeśli otrzymasz błąd, upewnij się, że masz przynajmniej 1.3GB wolnego miejsca na karcie SD +1. Naciśnij (A), aby kontynuować +1. Wciśnij (B) aby wrócić do menu głównego +1. Wybierz "Exit" +1. Naciśnij (A), aby ponownie zablokować uprawnienia do zapisu, jeśli zostaniesz o to poproszony +1. Przytrzymaj przycisk (R) i jednocześnie naciśnij przycisk (B), aby bezpiecznie wyjąć kartę SD +1. Włóż kartę SD do komputera +1. Skopiuj `__sysnand_###.bin` i `essential.exefs` z folderu `/gm9/out/` z twojej karty SD do bezpiecznego miejsca na twoim komputerze + + Zrób backupy w wielu lokacjach (np. dysku w chmurze) + + Te kopie zapasowe uratują cię przed "brickiem" i/lub pomogą ci odzyskać pliki z NAND jeśli coś pójdzie nie tak w przyszłości +1. Usuń `__sysnand_###.bin` i `__sysnand_###.bin.sha` z folderu `/gm9/out/` na twojej karcie SD po skopiowaniu ich do komputera +1. Włóż ponownie kartę SD do konsoli + + Jeśli twoja karta SD nie została automatycznie wykryta, przytrzymaj (R) i wciśnij (B) w tym samym czasie aby ją zamontować + +#### Section III - CTRTransfer + 1. Przejdź do `[0:] SDCARD` -> `gm9` 1. Wciśnij (A) na pliku CTRTransfer `.bin` aby go wybrać 1. Wybierz "CTRNAND options..." @@ -87,7 +109,7 @@ MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać. + Aktualizacje podczas używania B9S + Luma (tego co masz) są bezpieczne + Jeśli przy próbie aktualizacji pojawia się błąd, ustaw swoje DNS (w ustawieniach połączenia internetowego 3DS) na "auto" -#### Sekcja III - Uruchamianie FBI +#### Section IV - Launching FBI 1. Uruchom aplikację Download Play (ta [ikona]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Naciśnij (L) + (Dół) + (Select) w tym samym momencie aby otworzyć menu Rosalina @@ -100,7 +122,7 @@ MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać. 1. Uruchom aplikację Download Play 1. Twoja konsola powinna załadować Homebrew Launcher -#### Sekcja IV - Ponowna Instalacja Ticketów +#### Section V - Reinstalling Tickets Jeżeli skrypt nie znalazł `user tickets` oraz powiedział aby pominąć tą sekcję, pomiń tą sekcję {: .notice--info} @@ -120,19 +142,19 @@ Jeżeli skrypt nie znalazł `user tickets` oraz powiedział aby pominąć tą se + Wciśnij (B), aby odrzucić instalacje ticketów z CDN. 1. Wciśnij (Home), aby wyjść z FBI -#### Sekcja V - Ustawienia regionu +#### Section VI - Region settings 1. Włącz "System Settings" 1. Przejdź do "Other Settings", "Profile", a następnie, "Region Settings" 1. Wybierz kraj z regionu na który zmieniłeś swoją konsolę 1. Nie musisz ustawiać stanu, kiedy zostaniesz o niego zapytany -#### Sekcja VI - Usuwanie Obrazu CTRTransfer +#### Section VII - Remove CTRTransfer image 1. Uruchom GodMode9 poprzez trzymanie przycisku (Start) podczas uruchamiania konsoli 1. Przejdź do `[0:] SDCARD` -> `gm9` 1. Wciśnij (X) na pliku obrazu CTRTransfer `.bin`, aby go usunąć -1. Naciśnij (A) by potwierdzić +1. Naciśnij (A) aby potwierdzić 1. Wciśnij (Start), aby zrestartować konsolę ___ diff --git a/_pages/pl_PL/restoring-cfw.txt b/_pages/pl_PL/restoring-cfw.txt new file mode 100644 index 0000000000..33a13939f2 --- /dev/null +++ b/_pages/pl_PL/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Spis Treści" %} + +### Wymagana Lektura + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### Czego Potrzebujesz +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instrukcje + +#### Sekcja I - Przygotowanie + +1. Włóż kartę SD do komputera +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Włóż ponownie kartę SD do konsoli + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć: + * **"Show NAND or user string in System Settings"** +1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + +___ + +### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/pl_PL/seedminer.txt b/_pages/pl_PL/seedminer.txt index 18a8148a04..a8fd47bb66 100644 --- a/_pages/pl_PL/seedminer.txt +++ b/_pages/pl_PL/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Spis Treści" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Wymagana Lektura -Aby zainstalować boot9strap na Twojej konsoli, wykorzystamy lukę w zabezpieczeniach aplikacji "DSiWare". +To install boot9strap on your device, we derive your device's unique encryption key. Aby to się udało, musimy użyć narzędzia zwanego Seedminer, aby obliczyć klucz szyfrowania DSiWare (`movable.sed`) Twojego urządzenia. Następnie użyjemy tego klucza aby odszyfrować kompatybilną aplikację DSiWare i zaimplementować w niej exploit, który pozwoli nam na uruchamianie własnego kodu (użyty exploit zależy od regionu Twojej konsoli). @@ -16,21 +19,7 @@ Metoda ta wymaga użycia wydajnej karty graficznej, aby wykonać potrzebne oblic ### Instrukcje -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Sekcja II - Przygotowanie +#### Sekcja I - Przygotowanie 1. Włóż kartę SD do komputera 1. Przejdź do folderu `Nintendo 3DS` na karcie SD @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + Nazwa folderu, która została skopiowana to Twoje tzw. "ID0" 1. Włącz konsolę 1. Wejdź do Listy Znajomych (pomarańczowa ikona twarzy)({{ "/images/friend-list-icon.png" | absolute_url }}) w górnej linii Home menu - + Jeśli wyświetli się błąd i zostaniesz wyrzucony z menu, musisz stworzyć nową postać Mii, lub twoja konsola nie może się połączyć z serwerami Nintendo (przez bana lub problemy z połączeniem) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Wejdź na profil swojego Mii, a następnie znajdź pole "Friend Code" na górnym ekranie -#### Sekcja III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/pl_PL/site-navigation.txt b/_pages/pl_PL/site-navigation.txt index df328a93d6..f28c87d295 100644 --- a/_pages/pl_PL/site-navigation.txt +++ b/_pages/pl_PL/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popularne** + [Finalizowanie Instalacji](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Instalacja boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Aktualizacja z Kartridża](cart-update) + [Współautorzy](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Darowizny](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Wgrywanie ntrboot (Kilka Systemów 3DS)](flashing-ntrboot-(3ds-multi-system)) + [Wgrywanie ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Wgrywanie ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Wprowadzenie](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [Używanie GodMode9](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Strona główna](/pl_PL) + [Homebrew Launcher (Alternatywy)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Instalacja boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Instalacja boot9strap (Przeglądarka)](installing-boot9strap-(browser)) + [Instalacja boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Instalacja boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Instalacja boot9strap (MSET)](installing-boot9strap-(mset)) + [Instalacja boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Instalacja boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Przenoszenie EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Zmiana Regionu Konsoli](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Rozwiązywanie Problemów](troubleshooting) + [Odinstalowywanie CFW](uninstall-cfw) + [Aktualizowanie B9S](updating-b9s) diff --git a/_pages/pl_PL/updating-b9s.txt b/_pages/pl_PL/updating-b9s.txt index be3717d4e7..e9773f6a11 100644 --- a/_pages/pl_PL/updating-b9s.txt +++ b/_pages/pl_PL/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Aktualizowanie B9S" Ta strona poświęcona jest obecnym użytkownikom boot9strap, którzy chcą zaktualizować boot9strap do najnowszej wersji. -{% capture notice-1 %} -Były zgłaszane raporty fal banów dla użytkowników CFW od Nintendo. Aby ochronić się, wykonaj poniższe kroki przed rozpoczęciem poradnika: - -1. Wejdź do System Settings, następnie do "Internet Settings", "SpotPass", i "Sending of System Information" -1. Zablokuj opcję "Sending of System Information" -1. Wyjdź z System Settings -1. Wejdź do Listy Znajomych (pomarańczowa ikona twarzy)({{ "/images/friend-list-icon.png" | absolute_url }}) w górnej linii Home menu - + Jeśli wyświetli się błąd i zostaniesz wyrzucony z menu, lista znajomych jest albo już wyłączona lub twoja konsola nie może się połączyć z serwerami Nintendo (przez bana lub problemy z połączeniem) -1. Wejdź do ustawień Listy Znajomych, potem "Friend Notification Settings", potem "Show friends what you're playing" -1. Wyłącz opcję "Show friends what you're playing" -1. Wyjdź z Listy Znajomych - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### Czego Potrzebujesz * Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Najnowszej wersji [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standardowa instalacja; nie `devkit` czy plik `ntr`)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Najnowszej wersji [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrukcje @@ -39,7 +25,6 @@ Wykonując wszystkie kroki opisane w tej sekcji, zastąp istniejące pliki na ka {: .notice--info} 1. Włóż kartę SD do komputera -1. Skopiuj plik `boot.3dsx` do katalogu głównego twojej karty SD 1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD 1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `/boot9strap/` na karcie SD 1. Skopiuj `SafeB9SInstaller.firm` z SafeB9SInstaller `.zip` do folderu `/luma/payloads/` na karcie SD @@ -58,7 +43,7 @@ Wykonując wszystkie kroki opisane w tej sekcji, zastąp istniejące pliki na ka 1. Wyłącz konsolę 1. Włóż kartę SD do komputera -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Włóż ponownie kartę SD do konsoli 1. Włącz konsolę diff --git a/_pages/pt_BR/a9lh-to-b9s.txt b/_pages/pt_BR/a9lh-to-b9s.txt index cb8cb3d490..3897a54a0c 100644 --- a/_pages/pt_BR/a9lh-to-b9s.txt +++ b/_pages/pt_BR/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -Se você tiver um PIN habilitado no Luma3DS, SafeB9SInstaller lhe dará um erro "OTP Crypto Fail" a menos que você desabilite temporariamente o seu PIN (você pode reativar o PIN após a atualização). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Observe que o arquivo `secret_sector.bin`, necessário para a instalação, é o mesmo que pode ser encontrado nas várias versões do arquivo `data_input.zip`. Se você já possui este arquivo armazenado em algum lugar do seu disco, você pode usá-lo em vez de baixar o listado abaixo. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ Para todas as etapas nesta seção, substitua quaisquer arquivos existentes no s 1. Desligue seu dispositivo 1. Insira seu cartão SD no seu computador -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Apague quaisquer payloads `.bin` existentes na pasta `/luma/payloads/` do seu cartão SD card, já que eles não serão compatíveis com as versões boot9strap do Luma3ds 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/pt_BR/bannerbomb3.txt b/_pages/pt_BR/bannerbomb3.txt index aedc09eb09..37fc3b12dd 100644 --- a/_pages/pt_BR/bannerbomb3.txt +++ b/_pages/pt_BR/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/pt_BR/checking-for-cfw.txt b/_pages/pt_BR/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/pt_BR/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/pt_BR/credits.txt b/_pages/pt_BR/credits.txt index f96182013b..a179a2ca6d 100644 --- a/_pages/pt_BR/credits.txt +++ b/_pages/pt_BR/credits.txt @@ -2,6 +2,9 @@ title: "Créditos" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Um agradecimento especial a todos do [#Cakey na Freenode](http://webchat.freenode.net/?channels=%23Cakey) por serem o máximo!** {: .notice--primary} @@ -22,7 +25,7 @@ Se eu esqueci de você aqui, entre em contato comigo e eu adicionarei o seu nome + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Se eu esqueci de você aqui, entre em contato comigo e eu adicionarei o seu nome + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Se eu esqueci de você aqui, entre em contato comigo e eu adicionarei o seu nome + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/pt_BR/dsidumper.txt b/_pages/pt_BR/dsidumper.txt index e45c98aa13..9762798a6c 100644 --- a/_pages/pt_BR/dsidumper.txt +++ b/_pages/pt_BR/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Desligue seu dispositivo -1. Insira o cartão SD no seu computador -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsira seu cartão SD no seu dispositivo -1. Ligue o seu dispositivo - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_BR/faq.txt b/_pages/pt_BR/faq.txt index 2c4bb569b7..a9892760be 100644 --- a/_pages/pt_BR/faq.txt +++ b/_pages/pt_BR/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **R:** Sim **P:** *Como eu atualizo o Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **R:** Não. boot9strap é um método superior de carregar hax que é executado cedo na inicialização. diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt index 01dcba02e9..69243f5367 100644 --- a/_pages/pt_BR/finalizing-setup.txt +++ b/_pages/pt_BR/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizando a instalação" O arquivo `boot.firm` é o que é executado pelo boot9strap depois que ele acaba de carregar a NAND, e ele pode ser qualquer payload arm9 válido no formato FIRM. Este arquivo pode ser substituído a qualquer momento, embora o Luma3DS permita a inicialização de outros payloads arm9 no formato FIRM usando o chainloader do Luma3DS. -Neste caso, usamos o Luma3DS por [AuroraWright](https://github.com/AuroraWright/) para carregar uma SysNAND com patches diretamente, o que nos permite evitar a necessidade de qualquer tipo de EmuNAND, simplificando enormemente o uso de um 3DS hackeado, além de economizar espaço no cartão SD. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Durante este processo, também configuramos alguns programas como os seguintes: + **FBI** *(Instala jogos e aplicativos no formato CIA)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(Atualiza sua instalação CFW facilmente)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(Ferramenta multiuso com funções de NAND e cartucho)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ Durante este processo, também configuramos alguns programas como os seguintes: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ Durante este processo, também configuramos alguns programas como os seguintes: 1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Crie uma pasta chamada `cias` na raiz do seu cartão SD se ela ainda não existir 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copie `FBI.3dsx` para a pasta `/3ds/` no seu cartão SD 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copie `lumaupdater.cia` para a pasta `/cias/` no seu cartão SD 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copie `GodMode9.firm` do `.zip` do GodMode9 para a pasta `/luma/payloads/` no seu cartão SD 1. Copie a pasta `gm9` do `.zip` do GodMode9 para a raiz do seu cartão SD @@ -102,7 +103,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost #### Section VI - CTRNAND Luma3DS 1. Desligue seu dispositivo -1. Inicie o GodMode9 segurando (Start) durante a inicialização +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Se você for solicitado para criar um backup de arquivos essenciais, aperte (A) pra fazê-lo, e depois aperte (A) para continuar quando ele for concluído 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Aperte (Home) para abrir o menu de ações @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Você pode usar o Luma3DS Updater para atualizar o seu Luma3DS para a última versão abrindo-o e apertando (A). - -Isso não é a mesma coisa que uma atualização do sistema; ele apenas faz o download e extrai os arquivos mais recentes do Luma3DS. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Você agora irá inicializar o CFW Luma3DS na SysNAND por padrão. +You will now boot Luma3DS CFW by default. Agora você pode segurar (Select) durante a inicialização para abrir o menu de configuração do Luma3DS. @@ -177,7 +168,7 @@ Agora você pode apertar (L) + (Baixo) + (Select) enquanto o sistema está ligad {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Para informações de como usar as diversas funcionalidades do GodMode9, confira Para obter informações sobre como usar os vários recursos do Luma3DS, confira [sua wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt index 7449ad24c3..55d780394e 100644 --- a/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note que em algumas raras circunstâncias, pode ser possível que o processo de * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; não o arquivo `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt index 188172bbfb..6e3b2a9dcb 100644 --- a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note que em algumas raras circunstâncias, pode ser possível que o processo de ### What You Need * Your ntrboot compatible flashcart -* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; não o arquivo `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/pt_BR/flashing-ntrboot-(nds).txt b/_pages/pt_BR/flashing-ntrboot-(nds).txt index 8cfc3b6402..82ad615d22 100644 --- a/_pages/pt_BR/flashing-ntrboot-(nds).txt +++ b/_pages/pt_BR/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note que em algumas raras circunstâncias, pode ser possível que o processo de * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; não o arquivo `devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/pt_BR/formatting-sd-(linux).txt b/_pages/pt_BR/formatting-sd-(linux).txt new file mode 100644 index 0000000000..e3f180e570 --- /dev/null +++ b/_pages/pt_BR/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Esta página é destinada apenas a usuários do Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/pt_BR/formatting-sd-(mac).txt b/_pages/pt_BR/formatting-sd-(mac).txt new file mode 100644 index 0000000000..47e99bff19 --- /dev/null +++ b/_pages/pt_BR/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Esta página é destinada apenas a usuários do Mac. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insira o cartão SD no seu computador +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insira o cartão SD no seu computador +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/pt_BR/formatting-sd-(windows).txt b/_pages/pt_BR/formatting-sd-(windows).txt new file mode 100644 index 0000000000..7421f82c9f --- /dev/null +++ b/_pages/pt_BR/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Esta página é destinada apenas a usuários do Windows. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insira o cartão SD no seu computador +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/pt_BR/get-started-(new-3ds).txt b/_pages/pt_BR/get-started-(new-3ds).txt index b077f562fa..83df69cff4 100644 --- a/_pages/pt_BR/get-started-(new-3ds).txt +++ b/_pages/pt_BR/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Começar (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="Table of Contents" %} -### Leitura Obrigatória +### Required Reading -Selecione a página correspondente à sua versão na tabela abaixo. Note que os campos "de" e "para" são inclusivos. Isso significa que, por exemplo, a linha "de 9.0.0 para 9.2.0" inclui o 9.0.0, 9.1.0 e 9.2.0. - -Além disso, observe que o último número da versão do seu sistema (que é precedida por um traço) refere-se a versão do seu navegador. Atualmente, a versão do navegador é irrelevante para o New 3DS neste guia. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Selecione a página correspondente à sua versão na tabela abaixo. Note que os campos "de" e "para" são inclusivos. A versão do seu dispositivo pode ser encontrada no canto inferior direito da tela superior na Confirguração do Console. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
DeParaDeParaAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Instalando boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
TODAS AS VERSÕES

ntrboot
(Requer um flashcart compatível)

or

Instalando boot9strap (Hardmod)
(Requer soldagem)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/pt_BR/get-started-(old-3ds).txt b/_pages/pt_BR/get-started-(old-3ds).txt index 7d9248045a..b0ce56ed3b 100644 --- a/_pages/pt_BR/get-started-(old-3ds).txt +++ b/_pages/pt_BR/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "Começar (Old 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="Table of Contents" %} -### Leitura Obrigatória +### Required Reading -Selecione a página correspondente à sua versão na tabela abaixo. Note que os campos "de" e "para" são inclusivos. Isso significa que, por exemplo, a linha "de 9.0.0 para 9.2.0" inclui o 9.0.0, 9.1.0 e 9.2.0. - -Além disso, observe que as duas últimas colunas do gráfico referem-se ao último número de sua versão (que corresponde à versão do navegador instalada no sistema). Se a versão for -0, então você não tem um navegador, enquanto que qualquer número acima de -0 indica que um navegador está instalado. - -No caso da versão "5.0.0-0U" por exemplo, você seguiria a coluna "Sem Navegador" e a linha 5.0.0 a 5.1.0 porque o sistema está na versão do sistema nesse intervalo e não possui navegador instalado. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Selecione a página correspondente à sua versão na tabela abaixo. Note que os campos "de" e "para" são inclusivos. A versão do seu dispositivo pode ser encontrada no canto inferior direito da tela superior na Confirguração do Console. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ A versão do seu dispositivo pode ser encontrada no canto inferior direito da te - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
De ParaSem NavegadorCom NavegadorAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Instalando boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
TODAS AS VERSÕES

ntrboot
(Requer um flashcart compatível)

or

Instalando boot9strap (Hardmod)
(Requer soldagem)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/pt_BR/get-started.txt b/_pages/pt_BR/get-started.txt index fac66cad63..ef3df171f9 100644 --- a/_pages/pt_BR/get-started.txt +++ b/_pages/pt_BR/get-started.txt @@ -6,85 +6,16 @@ title: "Começar" ### Required Reading -Selecione a página correspondente à sua versão na tabela abaixo. Note que os campos "de" e "para" são inclusivos. Isso significa que, por exemplo, a linha "de 9.0.0 para 9.2.0" inclui o 9.0.0, 9.1.0 e 9.2.0. - -A versão do seu dispositivo pode ser encontrada no canto inferior direito da tela superior na Confirguração do Console. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Se você já hackeou seu 3DS antes e tem uma instalação de CFW que faz uso de uma EmuNAND, basta seguir todas as instruções na SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -Esta página é para instruções de como instalar boot9strap em um 3DS ou 2DS *sem modificações*. Se você já tem o arm9loaderhax instalado e deseja atualizar para boot9strap, siga [Atualizando para B9S](a9lh-to-b9s). -{: .notice--primary} - -Antes de começar, usuários de Windows devem habilitar a opção para exibir extensões de arquivos usando [Extensões de Arquivos (Windows)](file-extensions-(windows))! -{: .notice--info} - -Antes de iniciar, você pode querer verificar se o seu cartão SD possui erros utilizando [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), ou [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DeParaAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
TODAS AS VERSÕES

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/pt_BR/godmode9-usage.txt b/_pages/pt_BR/godmode9-usage.txt index dbd1be6103..df6a8a2fbd 100644 --- a/_pages/pt_BR/godmode9-usage.txt +++ b/_pages/pt_BR/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "Utilização do GodMode9" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt index 2d7ac12a22..9b7585e63a 100644 --- a/_pages/pt_BR/home.txt +++ b/_pages/pt_BR/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## O que eu posso fazer com Custom Firmware? + Jogar todos os cartuchos e jogos da eShop, independente da sua região de origem -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Utilizar "ROM hacks" de jogos que você possui + Tirar capturas de telas de aplicações e jogos + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Antes de começar a seguir o guia, você precisa saber os riscos de usar hack no 3DS: TODA vez que você modifica seu sistema, existe sempre o potencial de ocorrer um brick IRRECUPERÁVEL. Eles são raros, mas ainda existe a possibilidade, então garanta que você siga TODOS os passos EXATAMENTE como escritos.** + Se você já fez um hack anteriormente no seu 3DS com uma instalação EmuNAND, e gostaria de mover o conteúdo da sua antiga EmuNAND para a nova SysNAND com CFW, você deve seguir as instruções e restaurar sua EmuNAND quando solicitado, assim que chegar em [Finalizando a instalação](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Se tudo ocorrer conforme o esperado, você não perderá dados pessoais e continuará com tudo o que tinha antes de começar (jogos, NNID, saves, etc serão preservados). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + O seu cartão SD deve ser [MBR, e não GPT](http://adrenaline.uol.com.br/forum/threads/tutorial-convertendo-mbr-gpt-e-gpt-mbr.461966/) (o cartão SD que vem com o seu dispositivo é, por padrão, MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt b/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_BR/homebrew-launcher-(pichaxx).txt b/_pages/pt_BR/homebrew-launcher-(pichaxx).txt index 8a30234d3f..2510f3f40b 100644 --- a/_pages/pt_BR/homebrew-launcher-(pichaxx).txt +++ b/_pages/pt_BR/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Desligue seu dispositivo ___ diff --git a/_pages/pt_BR/homebrew-launcher-(soundhax).txt b/_pages/pt_BR/homebrew-launcher-(soundhax).txt index 8a3fca2b67..e8de5c52cb 100644 --- a/_pages/pt_BR/homebrew-launcher-(soundhax).txt +++ b/_pages/pt_BR/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Você vai precisar de um [método alternativo](homebrew-launcher-(alternatives)) para iniciar o Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Você vai precisar de um [método alternativo](homebrew-launcher-(alternatives)) para iniciar o Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/pt_BR/homebrew-launcher-(steelhax).txt b/_pages/pt_BR/homebrew-launcher-(steelhax).txt index d72fde0bc8..65ec1b9a69 100644 --- a/_pages/pt_BR/homebrew-launcher-(steelhax).txt +++ b/_pages/pt_BR/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Desligue seu dispositivo -1. Insira o cartão SD no seu computador -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsira seu cartão SD no seu dispositivo -1. Ligue o seu dispositivo -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/pt_BR/installing-boot9strap-(browser).txt b/_pages/pt_BR/installing-boot9strap-(browser).txt index f0fa911595..4f0dffc6ab 100644 --- a/_pages/pt_BR/installing-boot9strap-(browser).txt +++ b/_pages/pt_BR/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Instalando boot9strap (Navegador)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Instalando boot9strap (Navegador)" 1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD -1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD -1. Copie `SafeB9SInstaller.dat` e `Launcher.dat` do `.zip` do SafeB9SInstaller para a raiz de seu cartão SD - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo #### Section II - Launching SafeB9SInstaller -1. Inicie o navegador e vá para uma das seguintes URLs no seu dispositivo - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Ligue o seu dispositivo +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Instalando boot9strap (Navegador)" 1. Use o botão (A) e os botões direcionais para ativar o seguinte: + **"Show NAND or user string in System Settings"** 1. Aperte (Start) para salvar e reiniciar - + Se você receber um erro, apenas continue a próxima página ___ diff --git a/_pages/pt_BR/installing-boot9strap-(fredtool).txt b/_pages/pt_BR/installing-boot9strap-(fredtool).txt index ed14c72553..2b4e9a3bdc 100644 --- a/_pages/pt_BR/installing-boot9strap-(fredtool).txt +++ b/_pages/pt_BR/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ Esta é uma implementação funcional do exploit "FIRM partitions known-plaintex ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ Esta é uma implementação funcional do exploit "FIRM partitions known-plaintex #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo diff --git a/_pages/pt_BR/installing-boot9strap-(frogtool).txt b/_pages/pt_BR/installing-boot9strap-(frogtool).txt index b4fca569e7..b322cb0874 100644 --- a/_pages/pt_BR/installing-boot9strap-(frogtool).txt +++ b/_pages/pt_BR/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insira o cartão SD no seu computador 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsira seu cartão SD no seu dispositivo @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Aperte (Start) para salvar e reiniciar + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Selecione "Miscellaneous options" +1. Selecione "Switch the hb. title to the current app." +1. Aperte (B) para continuar +1. Aperte (B) para retornar para o menu principal do Rosalina +1. Aperte (B) para sair do menu do Rosalina +1. Aperte (Home), depois feche o Download Play +1. Relaunch the Download Play application +1. Seu dispositivo deve abrir o Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/pt_BR/installing-boot9strap-(hardmod).txt b/_pages/pt_BR/installing-boot9strap-(hardmod).txt index fdbc4acf7f..a9536c97a5 100644 --- a/_pages/pt_BR/installing-boot9strap-(hardmod).txt +++ b/_pages/pt_BR/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ Isto funcionará no New 3DS, New 2DS, Old 3DS e Old 2DS em *todas* as versões e * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Os usuários de Windows podem usar o compilado `.exe`, enquanto os usuários de Mac e Linux precisarão ter [Python 3](https://www.python.org/downloads/) instalado para executar o `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * O `.firm` correspondente ao seu dispositivo e versão: | Versão(ões) | Kernel | Old 3DS ou Old 2DS | New 3DS ou New 2DS | diff --git a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt index 8b69a785d3..a42d09cecd 100644 --- a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use o botão (A) e os botões direcionais para ativar o seguinte: - + **"Show NAND or user string in System Settings"** -1. Aperte (Start) para salvar e reiniciar - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Inicie o aplicativo Download Play -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Selecione "Miscellaneous options" -1. Selecione "Switch the hb. title to the current app." -1. Aperte (B) para continuar -1. Aperte (B) para retornar para o menu principal do Rosalina -1. Aperte (B) para sair do menu do Rosalina -1. Aperte (Home), depois feche o Download Play -1. Relaunch the Download Play application -1. Seu dispositivo deve abrir o Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt index ac9ad52a81..6156b170bc 100644 --- a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt +++ b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * Um ímã que aciona o modo de descanso do dispositivo (caso esteja usando um dispositivo dobrável) * Seu flashcart com o ntrboot instalado * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Desligue seu dispositivo -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD -1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsira seu cartão SD no seu dispositivo +1. Reinsert your SD card into your 3DS 1. Ligue o seu dispositivo #### Section II - ntrboot diff --git a/_pages/pt_BR/installing-boot9strap-(pichaxx).txt b/_pages/pt_BR/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..778310f13e --- /dev/null +++ b/_pages/pt_BR/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Desligue seu dispositivo +1. Insira o cartão SD no seu computador +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD +1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsira seu cartão SD no seu dispositivo +1. Ligue o seu dispositivo +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Espere todos as verificações de segurança finalizarem +1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap +1. Quando concluído, aperte (A) para reiniciar o seu dispositivo + +#### Section IV - Configuring Luma3DS + +1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use o botão (A) e os botões direcionais para ativar o seguinte: + + **"Show NAND or user string in System Settings"** +1. Aperte (Start) para salvar e reiniciar + + Se você receber um erro, apenas continue a próxima página + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pt_BR/installing-boot9strap-(safecerthax).txt b/_pages/pt_BR/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..1e0537e42c --- /dev/null +++ b/_pages/pt_BR/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Desligue seu dispositivo +1. Insira o cartão SD no seu computador +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsira seu cartão SD no seu dispositivo +1. Ligue o seu dispositivo + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Desligue seu dispositivo + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Espere todos as verificações de segurança finalizarem +1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap +1. Quando concluído, aperte (A) para reiniciar o seu dispositivo + +#### Section V - Configuring Luma3DS + +1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use o botão (A) e os botões direcionais para ativar o seguinte: + + **"Show NAND or user string in System Settings"** +1. Aperte (Start) para salvar e reiniciar + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Desligue seu dispositivo + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pt_BR/installing-boot9strap-(soundhax).txt b/_pages/pt_BR/installing-boot9strap-(soundhax).txt index a15ba915cd..d7d91b54c2 100644 --- a/_pages/pt_BR/installing-boot9strap-(soundhax).txt +++ b/_pages/pt_BR/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD 1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + Nesta situação, abrir o Soundhax imediatamente faria com que estes palpites aparecessem toda vez que o Som Nintendo 3DS fosse aberto até que isto fosse feito 1. Vá até `/SDCARD`, depois toque "<3 nedwill 2016" + Isso pode levar várias tentativas - + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt b/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..a944b2b0a7 --- /dev/null +++ b/_pages/pt_BR/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Desligue seu dispositivo +1. Insira o cartão SD no seu computador +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsira seu cartão SD no seu dispositivo +1. Ligue o seu dispositivo + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Desligue seu dispositivo + +#### Section III - Launching SafeB9SInstaller +1. Ligue o seu dispositivo +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. Se o exploit tiver sucesso, você terá entrado no SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Espere todos as verificações de segurança finalizarem +1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap +1. Quando concluído, aperte (A) para reiniciar o seu dispositivo + +#### Section V - Configuring Luma3DS + +1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use o botão (A) e os botões direcionais para ativar o seguinte: + + **"Show NAND or user string in System Settings"** +1. Aperte (Start) para salvar e reiniciar + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Desligue seu dispositivo + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt index 3a7e163276..405ed79c6a 100644 --- a/_pages/pt_BR/installing-boot9strap-(usm).txt +++ b/_pages/pt_BR/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insira o cartão SD no seu computador 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/pt_BR/legacy-methods.txt b/_pages/pt_BR/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/pt_BR/legacy-methods.txt +++ b/_pages/pt_BR/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/pt_BR/ntrboot.txt b/_pages/pt_BR/ntrboot.txt index d392ea9d1a..30f3825c5b 100644 --- a/_pages/pt_BR/ntrboot.txt +++ b/_pages/pt_BR/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/pt_BR/region-changing.txt b/_pages/pt_BR/region-changing.txt index e004d0f682..aab34a2b49 100644 --- a/_pages/pt_BR/region-changing.txt +++ b/_pages/pt_BR/region-changing.txt @@ -17,7 +17,7 @@ Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` n Esse processo irá desvicular sua NNID do sistema, dado que ela não será mais compatível com o mesmo. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. New 3DSs com as regiões mudadas que já acessaram a eShop nas suas regiões originais não podem criar uma nova NNID e acessar a eShop nas suas novas regiões! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note que ocasionalmente a eShop inexplicavelmente não vai funcionar para os dispositivos para os quais deveria funcionar. Isto tem a ver com os servidores da Nintendo, e eu realmente não tenho controle sobre isto. Além disso, note que ocasionalmente o eShop inexplicavelmente funcionará para dispositivos que não deveriam (tais como alguns New 3DSs). A causa para isto é atualmente desconhecida. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copie `FBI.3dsx` para a pasta `/3ds/` no seu cartão SD 1. Reinsira seu cartão SD no seu dispositivo -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Inicie o GodMode9 segurando (Start) durante a inicialização 1. Se você for solicitado para criar um backup de arquivos essenciais, aperte (A) pra fazê-lo, e depois aperte (A) para continuar quando ele for concluído 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Aperte (Home) para abrir o menu de ações +1. Selecione "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Aperte (A) para confirmar + + Este processo levará algum tempo + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Aperte (A) para continuar +1. Aperte (B) para retornar para o menu principal +1. Select "Exit" +1. Se solicitado, aperte (A) para bloquear as permissões de escrita +1. Segure (R) e aperte (B) ao mesmo tempo para ejetar o cartão SD +1. Insira o cartão SD no seu computador +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Faça backups em diversos lugares (tais como armazenamento de arquivos online) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsira seu cartão SD no seu dispositivo + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navegue para `[0:] SDCARD` -> `gm9` 1. Aperte (A) no `.bin` da CTRTransfer para selecioná-lo 1. Selecione "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Atualizações feitas enquanto usa B9S + Luma (o que você tem) são seguras + Se isso der um erro, defina suas configurações de DNS para "Automático" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Aperte (L) + (Baixo) + (Select) ao mesmo tempo para abrir o menu do Rosalina @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Inicie o aplicativo Download Play 1. Seu dispositivo deve abrir o Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets Se o script não encontrou nenhum ticket de usuário lhe disse para pular esta seção, então pule esta seção {: .notice--info} @@ -120,14 +142,14 @@ Se o script não encontrou nenhum ticket de usuário lhe disse para pular esta s + Aperte (B) para recusar a instalação de tickets do CDN. 1. Aperte (Home) para sair do FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Inicie a Configuração do console 1. Vá para "Outras Configurações", "Perfil", depois "Região" 1. Selecione um país da região para qual você trocou 1. Se solicitado, você não precisa definir um estado -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Inicie o GodMode9 segurando (Start) durante a inicialização 1. Navegue para `[0:] SDCARD` -> `gm9` diff --git a/_pages/pt_BR/restoring-cfw.txt b/_pages/pt_BR/restoring-cfw.txt new file mode 100644 index 0000000000..be9e8b31c9 --- /dev/null +++ b/_pages/pt_BR/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insira o cartão SD no seu computador +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsira seu cartão SD no seu dispositivo + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use o botão (A) e os botões direcionais para ativar o seguinte: + * **"Show NAND or user string in System Settings"** +1. Aperte (Start) para salvar e reiniciar + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_BR/seedminer.txt b/_pages/pt_BR/seedminer.txt index 99f880d21c..309c2681f1 100644 --- a/_pages/pt_BR/seedminer.txt +++ b/_pages/pt_BR/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insira o cartão SD no seu computador 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Ligue o seu dispositivo 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/pt_BR/site-navigation.txt b/_pages/pt_BR/site-navigation.txt index d93d320f08..ef48fb2bc6 100644 --- a/_pages/pt_BR/site-navigation.txt +++ b/_pages/pt_BR/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizando a instalação](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Créditos](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Doações](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Começar](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/pt_BR/) + [Homebrew Launcher (Alternativas)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Instalando boot9strap (Navegador)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Instalando boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Instalando boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Mover EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Mudança de Região](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Desinstalar o CFW](uninstall-cfw) + [Atualizando B9S](updating-b9s) diff --git a/_pages/pt_BR/updating-b9s.txt b/_pages/pt_BR/updating-b9s.txt index 8fc889cf63..dc3d7034e1 100644 --- a/_pages/pt_BR/updating-b9s.txt +++ b/_pages/pt_BR/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Atualizando B9S" # Esta página é para usuários do boot9strap atualizarem a instalação do boot9strap para a versão mais recente. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ Para todas as etapas nesta seção, substitua quaisquer arquivos existentes no s {: .notice--info} 1. Insira o cartão SD no seu computador -1. Copy `boot.3dsx` to the root of your SD card 1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD 1. Copie os arquivos `boot9strap.firm` e `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD 1. Copie `SafeB9SInstaller.firm` do `.zip` do SafeB9SInstaller para a pasta `/luma/payloads/` no seu cartão SD @@ -58,7 +43,7 @@ Para todas as etapas nesta seção, substitua quaisquer arquivos existentes no s 1. Desligue seu dispositivo 1. Insira o cartão SD no seu computador -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsira seu cartão SD no seu dispositivo 1. Ligue o seu dispositivo diff --git a/_pages/pt_PT/a9lh-to-b9s.txt b/_pages/pt_PT/a9lh-to-b9s.txt index 5bd516ffbb..011fe50ddb 100644 --- a/_pages/pt_PT/a9lh-to-b9s.txt +++ b/_pages/pt_PT/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/pt_PT/bannerbomb3.txt b/_pages/pt_PT/bannerbomb3.txt index c06acecce6..c024e72c7a 100644 --- a/_pages/pt_PT/bannerbomb3.txt +++ b/_pages/pt_PT/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Leitura Obrigatória To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/pt_PT/checking-for-cfw.txt b/_pages/pt_PT/checking-for-cfw.txt new file mode 100644 index 0000000000..257b1f8de5 --- /dev/null +++ b/_pages/pt_PT/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/pt_PT/credits.txt b/_pages/pt_PT/credits.txt index 6e3194deae..80ad99f2dc 100644 --- a/_pages/pt_PT/credits.txt +++ b/_pages/pt_PT/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Um agradecimento especial a todos no [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) por serem fantásticos!** {: .notice--primary} @@ -22,7 +25,7 @@ Se me tiver esquecido de ti, contacta-me que adiciono o teu nome. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Se me tiver esquecido de ti, contacta-me que adiciono o teu nome. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Se me tiver esquecido de ti, contacta-me que adiciono o teu nome. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/pt_PT/dsidumper.txt b/_pages/pt_PT/dsidumper.txt index 7b56f48419..9762798a6c 100644 --- a/_pages/pt_PT/dsidumper.txt +++ b/_pages/pt_PT/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Leitura Obrigatória - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_PT/faq.txt b/_pages/pt_PT/faq.txt index 9c75dfda0d..37b728a976 100644 --- a/_pages/pt_PT/faq.txt +++ b/_pages/pt_PT/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **P:** *Como é que eu atualizo o Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/pt_PT/finalizing-setup.txt b/_pages/pt_PT/finalizing-setup.txt index 3caf2d1af0..a3d898fb81 100644 --- a/_pages/pt_PT/finalizing-setup.txt +++ b/_pages/pt_PT/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/pt_PT/flashing-ntrboot-(3ds-multi-system).txt b/_pages/pt_PT/flashing-ntrboot-(3ds-multi-system).txt index 509039d259..8038eb83bb 100644 --- a/_pages/pt_PT/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/pt_PT/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt index ab2d002b92..f63df4023a 100644 --- a/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/pt_PT/flashing-ntrboot-(nds).txt b/_pages/pt_PT/flashing-ntrboot-(nds).txt index 0e96719f97..34ce64f95d 100644 --- a/_pages/pt_PT/flashing-ntrboot-(nds).txt +++ b/_pages/pt_PT/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/pt_PT/formatting-sd-(linux).txt b/_pages/pt_PT/formatting-sd-(linux).txt new file mode 100644 index 0000000000..6ab33ec65b --- /dev/null +++ b/_pages/pt_PT/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/pt_PT/formatting-sd-(mac).txt b/_pages/pt_PT/formatting-sd-(mac).txt new file mode 100644 index 0000000000..05711a8847 --- /dev/null +++ b/_pages/pt_PT/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/pt_PT/formatting-sd-(windows).txt b/_pages/pt_PT/formatting-sd-(windows).txt new file mode 100644 index 0000000000..99f0ded960 --- /dev/null +++ b/_pages/pt_PT/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Esta página é só para utilizadores de Windows. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/pt_PT/get-started-(new-3ds).txt b/_pages/pt_PT/get-started-(new-3ds).txt index fd822822cd..2b5bbe8f0d 100644 --- a/_pages/pt_PT/get-started-(new-3ds).txt +++ b/_pages/pt_PT/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Leitura Obrigatória -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromAtéAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/pt_PT/get-started-(old-3ds).txt b/_pages/pt_PT/get-started-(old-3ds).txt index febd9d401a..6ba8694dbf 100644 --- a/_pages/pt_PT/get-started-(old-3ds).txt +++ b/_pages/pt_PT/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Leitura Obrigatória -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From AtéNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/pt_PT/get-started.txt b/_pages/pt_PT/get-started.txt index 58baaea0e1..377327c285 100644 --- a/_pages/pt_PT/get-started.txt +++ b/_pages/pt_PT/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Leitura Obrigatória -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Se já tiveres hackeado a tua 3DS e tiveres um sistema CFW baseado em EmuNAND, segue todas as instruções na SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Antes de começar, pode ser boa ideia verificar se o teu cartão SD tem erros, com o [H2testw (Windows)](h2testw-(windows)), o [F3 (Linux)](f3-(linux)), ou o [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromAtéAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/pt_PT/godmode9-usage.txt b/_pages/pt_PT/godmode9-usage.txt index d54640094c..fb747822d1 100644 --- a/_pages/pt_PT/godmode9-usage.txt +++ b/_pages/pt_PT/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Leitura Obrigatória diff --git a/_pages/pt_PT/home.txt b/_pages/pt_PT/home.txt index 9771624f69..4d023d4bd3 100644 --- a/_pages/pt_PT/home.txt +++ b/_pages/pt_PT/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Jogar todos os jogos de cartão e da eShop, independentemente da região -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Usar "ROM hacks" para jogos que possuas + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt b/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt index 1dfa5a40fc..487f25a45c 100644 --- a/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Leitura Obrigatória - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_PT/homebrew-launcher-(pichaxx).txt b/_pages/pt_PT/homebrew-launcher-(pichaxx).txt index 13126c2ac9..6f7ae93c50 100644 --- a/_pages/pt_PT/homebrew-launcher-(pichaxx).txt +++ b/_pages/pt_PT/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Leitura Obrigatória This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/pt_PT/homebrew-launcher-(soundhax).txt b/_pages/pt_PT/homebrew-launcher-(soundhax).txt index e80e06e888..7c03254da9 100644 --- a/_pages/pt_PT/homebrew-launcher-(soundhax).txt +++ b/_pages/pt_PT/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/pt_PT/homebrew-launcher-(steelhax).txt b/_pages/pt_PT/homebrew-launcher-(steelhax).txt index 1ddfa6939d..65ec1b9a69 100644 --- a/_pages/pt_PT/homebrew-launcher-(steelhax).txt +++ b/_pages/pt_PT/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Leitura Obrigatória - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/pt_PT/installing-boot9strap-(browser).txt b/_pages/pt_PT/installing-boot9strap-(browser).txt index 35b6370080..0831b0bc58 100644 --- a/_pages/pt_PT/installing-boot9strap-(browser).txt +++ b/_pages/pt_PT/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Leitura Obrigatória + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/pt_PT/installing-boot9strap-(fredtool).txt b/_pages/pt_PT/installing-boot9strap-(fredtool).txt index b65d1aa98b..e245a18003 100644 --- a/_pages/pt_PT/installing-boot9strap-(fredtool).txt +++ b/_pages/pt_PT/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Leitura Obrigatória This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/pt_PT/installing-boot9strap-(frogtool).txt b/_pages/pt_PT/installing-boot9strap-(frogtool).txt index 5c79f23278..98f9f71e9c 100644 --- a/_pages/pt_PT/installing-boot9strap-(frogtool).txt +++ b/_pages/pt_PT/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Leitura Obrigatória We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/pt_PT/installing-boot9strap-(hardmod).txt b/_pages/pt_PT/installing-boot9strap-(hardmod).txt index 94432618ba..3293214085 100644 --- a/_pages/pt_PT/installing-boot9strap-(hardmod).txt +++ b/_pages/pt_PT/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt index e72dc28f6c..a42d09cecd 100644 --- a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt +++ b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Leitura Obrigatória - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt index e7596cfa4c..0d2a5eeb69 100644 --- a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt +++ b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/pt_PT/installing-boot9strap-(pichaxx).txt b/_pages/pt_PT/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..ae7297804f --- /dev/null +++ b/_pages/pt_PT/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Leitura Obrigatória + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pt_PT/installing-boot9strap-(safecerthax).txt b/_pages/pt_PT/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..f376f6d23f --- /dev/null +++ b/_pages/pt_PT/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/pt_PT/installing-boot9strap-(soundhax).txt b/_pages/pt_PT/installing-boot9strap-(soundhax).txt index d79812f13b..ae8ceec2d3 100644 --- a/_pages/pt_PT/installing-boot9strap-(soundhax).txt +++ b/_pages/pt_PT/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Leitura Obrigatória -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/pt_PT/installing-boot9strap-(ssloth-browser).txt b/_pages/pt_PT/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..880526a2f0 --- /dev/null +++ b/_pages/pt_PT/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/pt_PT/installing-boot9strap-(usm).txt b/_pages/pt_PT/installing-boot9strap-(usm).txt index 87985f0d37..3c541229fc 100644 --- a/_pages/pt_PT/installing-boot9strap-(usm).txt +++ b/_pages/pt_PT/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Leitura Obrigatória In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/pt_PT/legacy-methods.txt b/_pages/pt_PT/legacy-methods.txt index 0ec32b0047..93641a9c77 100644 --- a/_pages/pt_PT/legacy-methods.txt +++ b/_pages/pt_PT/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/pt_PT/ntrboot.txt b/_pages/pt_PT/ntrboot.txt index 874c8300af..6b996b7de7 100644 --- a/_pages/pt_PT/ntrboot.txt +++ b/_pages/pt_PT/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/pt_PT/region-changing.txt b/_pages/pt_PT/region-changing.txt index e2c02088a1..e79400ffb5 100644 --- a/_pages/pt_PT/region-changing.txt +++ b/_pages/pt_PT/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. Isto tem a ver totalmente com os servidores da Nintendo, e eu não tenho nenhum controlo sobre isso. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Pressiona (A) para confirmar + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + Se encontrares algum erro, muda as configurações da DNS para "automático" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Vai a "Outras Definições, "Perfil", depois a "Definições de Região" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/pt_PT/restoring-cfw.txt b/_pages/pt_PT/restoring-cfw.txt new file mode 100644 index 0000000000..46901399ea --- /dev/null +++ b/_pages/pt_PT/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Leitura Obrigatória + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_PT/seedminer.txt b/_pages/pt_PT/seedminer.txt index 4af3a65420..5296b5251f 100644 --- a/_pages/pt_PT/seedminer.txt +++ b/_pages/pt_PT/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Leitura Obrigatória -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/pt_PT/site-navigation.txt b/_pages/pt_PT/site-navigation.txt index 2037656043..c3ec929c58 100644 --- a/_pages/pt_PT/site-navigation.txt +++ b/_pages/pt_PT/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Créditos](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Começar](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/pt_PT/updating-b9s.txt b/_pages/pt_PT/updating-b9s.txt index 58f3c5eb23..1e683ba948 100644 --- a/_pages/pt_PT/updating-b9s.txt +++ b/_pages/pt_PT/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/ro_RO/a9lh-to-b9s.txt b/_pages/ro_RO/a9lh-to-b9s.txt index 018c42d85b..62c643b1c8 100644 --- a/_pages/ro_RO/a9lh-to-b9s.txt +++ b/_pages/ro_RO/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ Pentru a folosi linkurile [magnetice](https://wikipedia.org/wiki/Magnet_URI_sche Pentru a extrage fişierele `.7z` de pe această pagină, veţi avea nevoie de un arhivator de fişiere ca [7-Zip](http://www.7-zip.org/) sau [The Unarchiver] (https://theunarchiver.com/). -Dacă aveți un PIN pe Luma3DS, SafeBS9Installer vă va da eroarea "OTP Crypto Fail" cu excepția în cazul în care vă deazctivați temporar codul PIN (puteți reactiva codul PIN după actualizări). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -Au existat rapoarte despre un val de banuri adresate utilizatorilor de CFW de către Nintendo. Pentru a vă proteja, efectuaţi următorii paşi înainte de a începe acest ghid: - -1. Mergeți în System Settings, apoi "Internet Settings", apoi "SpotPass", apoi "Sending of System Information" -1. Dezactivați opţiunea "Sending of System Information" -1. Ieșiți din System Settings -1. Mergeți în Lista de prieteni ([iconița cu fața portocalie]({{ "/images/friend-list-icon.png" | absolute_url }} în rândul superior de pe meniul HOME) - + Dacă primiți o eroare și sunteți dat afară din meniu, setarea Listei de prieteni este dezactivată sau consola nu se mai poate conecta în serverele Nintendo (din cauza unui ban sau problemelor de conexiune) -1. Mergeți la setările de pe Lista de prieteni, apoi "Friend Notification Settings", apoi "Show friends what you're playing" -1. Dezactivați opțiunea "Show friends what you're playing" -1. Ieșiți din Lista de prieteni - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### Ce aveți nevoie Țineți cont că următorul fișier necesar numit `secret_sector.bin` e același care se găsea în diferitele versiuni ale arhivei `data_input.zip`. Dacă aveți deja acel fișier undeva pe discul dumneavoastră, puteți să-l folosiți pe acela în loc să descărcați fișierul de mai jos. @@ -42,11 +26,10 @@ Au existat rapoarte despre un val de banuri adresate utilizatorilor de CFW de c {: .notice--info} * - **Doar utilizatorii de New 3DS:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) -* Versiunea v7.0.5 de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fișierul `.7z`)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* -* Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instrucțiuni @@ -57,8 +40,7 @@ Pentru toți pașii din această secțiune, suprascrieți fișierele existente d 1. Închideți dispozitivul 1. Introduceți cardul SD în calculator -1. Copiați `boot.3dsx` în rădăcina cardului SD -1. Copiați `boot.firm` de la ultima versiune de Luma3DS `.zip` pe rădăcina cardului SD +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copiati `arm9loaderhax.bin` din v7.0.5 Luma3DS `.7z` în rădăcina cardului SD 1. Ștergeți orice payload-uri `.bin` din folderul `/luma/payloads/` de pe cardul SD pentru că ele nu vor fi compatibile cu versiuni Luma3DS compatibile cu boot9strap 1. Copiați `SafeBS9Installer.bin` din arhiva `.zip` SafeB9SInstaller în folderul `/luma/payloads/` de pe cardul SD diff --git a/_pages/ro_RO/bannerbomb3.txt b/_pages/ro_RO/bannerbomb3.txt index e9285d18f2..fc39cd949d 100644 --- a/_pages/ro_RO/bannerbomb3.txt +++ b/_pages/ro_RO/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Cuprins" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectură obligatorie Pentru a descărca DSiWare de sistem, vom exploata o eroare din fereastra DSiWare Data Management de la aplicația Settings. @@ -17,7 +20,7 @@ Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japon * Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer) #### Secțiunea I - BannerBomb3 -1. Deschideţi [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) pe calculator +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Încărcați fișierul movable.sed folosind opțiunea "Choose File" 1. Apăsați "Go" + Aceasta va descărca un exploit de DSiWare numit `F00D43D5.bin` înăuntru unui fișier .zip (`tadmuffin_out.zip`) diff --git a/_pages/ro_RO/checking-for-cfw.txt b/_pages/ro_RO/checking-for-cfw.txt new file mode 100644 index 0000000000..ec59985c45 --- /dev/null +++ b/_pages/ro_RO/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instrucțiuni + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/ro_RO/credits.txt b/_pages/ro_RO/credits.txt index b4aa05edf3..2c0f59193e 100644 --- a/_pages/ro_RO/credits.txt +++ b/_pages/ro_RO/credits.txt @@ -2,6 +2,9 @@ title: "Contribuții" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Mulțumiri speciale tuturor oamenilor din [#Cakey de pe Freenode](http://webchat.freenode.net/?channels=%23Cakey) pentru că sunt minunați!** {: .notice--primary} @@ -22,7 +25,7 @@ Dacă te-am uitat, contactează-mă și îți voi adaugă numele. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Dacă te-am uitat, contactează-mă și îți voi adaugă numele. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Dacă te-am uitat, contactează-mă și îți voi adaugă numele. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/ro_RO/dsidumper.txt b/_pages/ro_RO/dsidumper.txt index 540211a9a8..9762798a6c 100644 --- a/_pages/ro_RO/dsidumper.txt +++ b/_pages/ro_RO/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Cuprins" %} - -### Lectură obligatorie - -Pentru a descărca DSiWare de sistem, vom folosi un exploit de homebrew lanucher disponibil. - -Dacă în timpul acestui ghid găsiți o aplicație de DS Internet Settings defectă, urmați [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) înainte de a continua - -### Ce aveți nevoie - -* Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer) -* Ultima versiune de [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Secțiunea I - Preparații - -1. Închideți dispozitivul -1. Introduceți cardul SD în calculator -1. Copiați fișierul `movable.sed` in rădăcina cardului SD -1. Copiați `DSiWare_Dump.3dsx` în folderul `/3ds/` de pe cardul SD -1. Reintroduceți cardul SD în dispozitivul dumneavoastră -1. Porniți dispozitivul - -#### Secţiunea II - Descărcare de DSiWare - -1. Deschideți Homebrew Launcher folosind orice metodă -1. Lansați DSiWare Dumper din lista de homebrew - + Aceasta va descărca o aplicație de DSiWare în rădăcina cardului SD - + Este normal să vedeți câteva erori. -1. Când arată "Success", acesta este fișierul pe care îl veți folosi pentru copia de rezervă DSiWare mai târziu în ghid - -Continuați la [Instalând boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ro_RO/faq.txt b/_pages/ro_RO/faq.txt index 27f02a5964..e2611e5d0a 100644 --- a/_pages/ro_RO/faq.txt +++ b/_pages/ro_RO/faq.txt @@ -6,7 +6,7 @@ title: "Întrebări frecvente" **R:** Da **Î:** *Cum actualizez Luma3DS?* -**R:** Folosiți [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Î:** *Am auzit că trebuie să plătesc pentru (Gateway, Sky3DS, etc). Am nevoie de așa ceva?* **R:** Nu. boot9strap este o metodă superioară pentru a încărca hax care rulează devreme în timpul pornirii. diff --git a/_pages/ro_RO/finalizing-setup.txt b/_pages/ro_RO/finalizing-setup.txt index df527b108a..990ab01245 100644 --- a/_pages/ro_RO/finalizing-setup.txt +++ b/_pages/ro_RO/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizând instalarea" Fișierul `boot.firm` este ceea ce e rulat de boot9strap însuși după ce se încarcă de pe NAND și poate fi orice alt payload arm9 valid în formatul FIRM. Acest fișier poate fi înlocuit oricând, totuși Luma3DS va permite lansarea altor payload-uri arm9 în formatul FIRM folosind chainloader-ul de la Luma3DS. -În acest caz, putem să folosim Luma3DS de [AuroraWright](https://github.com/AuroraWright/) pentru a porni un SysNAND patch-uit direct, făcând inutilă nevoia de a folosi orice fel de EmuNAND, simplificând semnificativ folosirea unui 3DS modat economisind de asemenea spațiu pe cardul SD. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Pe parcursul acestui proces, vom instala și programe ca următoarele: + **FBI** *(instalează jocuri și aplicații în format CIA)* + **Anemone3DS** *(instalează teme personalizate)* + **Checkpoint** *(creează copii de rezervă și restaurează datele de salvare pentru jocuri de 3DS și DS)* -+ **Luma3DS Updater** *(actualizează CFW-ul instalat cu ușurință)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(unealtă multifuncțională care poate face funcții de NAND și card)* + **Launcher Homebrew Loader** *(pornește Homebrew Launcher) * + **DSP1** *(permite aplicațiile de homebrew să aibă sunet)* @@ -25,12 +25,12 @@ Pe parcursul acestui proces, vom instala și programe ca următoarele: * Ultima versiune de [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(fișierul `.cia`)* * Ultima versiune de [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(fișierul `.cia`)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * Cea mai nouă versiune de [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* Cea mai nouă versiune de [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * Cea mai nouă versiune de [FBI](https://github.com/Steveice10/FBI/releases/) *(fișierele `.3dsx` și `.cia`)* * Cea mai recentă versiune [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* Ultima versiune de [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) *(fișierul `.cia`)* ### Instrucțiuni @@ -39,15 +39,16 @@ Pe parcursul acestui proces, vom instala și programe ca următoarele: 1. Închideți dispozitivul 1. Introduceți cardul SD în calculator 1. Creați un folder numit `3ds` în rădăcina cardului SD dacă nu există deja + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Creați un folder numit `cias` în rădăcina cardului SD dacă nu există deja 1. Copiați `ctr-no-timeoffset.3dsx` în folderul `/3ds/` de pe cardul SD 1. Copiați `FBI.3dsx` în folderul `/3ds/` de pe cardul SD 1. Copiați `Homebrew_Launcher.cia` în folderul `/cias/` de pe cardul SD -1. Copiați `lumaupdater.cia` în folderul `/cias/` de pe cardul SD 1. Copiați `FBI.cia` în folderul `/cias/` de pe cardul SD 1. Copiați `DSP1.cia` în folderul `/cias/` de pe cardul SD 1. Copiați `Anemone3DS.cia` în folderul `/cias/` de pe cardul SD 1. Copiați `Checkpoint.cia` în folderul `/cias/` de pe cardul SD +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Creați un folder numit `payloads` în folderul `luma` de rădăcina cardului SD dacă nu există deja 1. Copiați `GodMode9.firm` din arhiva `.zip` GodMode9 în folderul `/luma/payloads/` de pe cardul SD 1. Copiați folderul `gm9` din fișierul `.zip` GodMode9 în rădăcina cardului SD @@ -102,7 +103,7 @@ Dacă, înainte să urmăriți acest ghid, aveați deja o configurare cu EmuNAND #### Secțiunea VI - CTRNAND Luma3DS 1. Închideți dispozitivul -1. Lansați GodMode9 ținând apăsat (Start) în timpul pornirii +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Când vi se cere să faceți o copie de rezervă a fișierelor esențiale, apăsați (A) pentru a o realiza, apoi apăsați (A) ca să continuați după ce s-a terminat 1. Dacă vi se cere să reparați dara și ora RTC, apăsați (A) pentru a efectua, apoi setați data și ora, apoi apăsați (A) pentru a continua 1. Apăsați (Home) pentru a arăta meniul de acțiuni @@ -150,18 +151,8 @@ ___ #### Informaţii şi Note -{% capture notice-10 %} -Acum puteți folosi Luma3DS Updater pentru a actualiza Luma3DS la cea mai nouă versiune doar prin a o deschide și apăsa (A). - -Nu este același lucru ca o actualizare de sistem; el doar descarcă și extrage cele mai noi fișiere de Luma3DS. - -Acest lucru va actualiza fişierele Luma3DS de pe cardul SD şi în CTRNAND, care este ceea ce aparatul folosește la pornire atunci când nu există niciun card SD prezent. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Acum veți porni CFW SysNAND Luma3DS în mod implicit. +You will now boot Luma3DS CFW by default. Acum puteți ține apăsat (Select) la pornire pentru a intra în meniul de configurare Luma3DS. @@ -177,7 +168,7 @@ Acum puteți apăsa (L) + (Jos) + (Select) în timp ce sistemul pornește pentru {% capture notice-6 %} Dacă doriți să actualizați la un card SD mai mare, tot ce trebuie să faceți este să formatați cardul SD nou ca FAT32 și copiați și lipiți conținuturile din vechiul card SD către noul card SD. -În cazul în care cardul SD este mai mare decât 32GB, va trebui să folosiți o unealtă diferită pentru a-l formata, precum [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) pentru Windows, [gparted](http://gparted.org/download.php) pentru Linux, sau [Utilitate Disc](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) pentru Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ Pentru informații despre cum să folosiți funcțiile diverse de pe GodMode9, v Pentru informații despre cum să folosiți funcțiile diverse de pe Luma3DS, vedeți [wiki-ul](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -Pentru informaţii despre cum să instalați teme personalizate şi ecrane splash, vedeți pe [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} Pentru informații despre cum să folosiți cheat code-uri Gateshark, vedeți [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/ro_RO/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ro_RO/flashing-ntrboot-(3ds-multi-system).txt index 466d7f5eac..3cc26a0e18 100644 --- a/_pages/ro_RO/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/ro_RO/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Această metodă necesită acces temporar la un al doilea dispozitiv din familia * Două dispozitive din familia 3DS + **3DS-ul sursă**: dispozitivul din familia 3DS care deja pornește boot9strap + **3DS-ul țintă**: dispozitivul pe firmware stoc -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(fișierul `ntr`; nu`devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * Cea mai recentă versiune de [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instrucțiuni diff --git a/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt b/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt index 163036762c..0ce149e223 100644 --- a/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Această metodă necesită nimic mai mult decât un 3DS stoc nemodat şi un flas ### Ce aveți nevoie * Flashcart-ul dumneavoastră compatibil cu ntrboot -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(fișierul `ntr`; nu`devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * Ultima versiune de [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instrucțiuni diff --git a/_pages/ro_RO/flashing-ntrboot-(nds).txt b/_pages/ro_RO/flashing-ntrboot-(nds).txt index d541341a57..a94e81fd7e 100644 --- a/_pages/ro_RO/flashing-ntrboot-(nds).txt +++ b/_pages/ro_RO/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Această metodă necesită acces temporar la un Nintendo DS sau Nintendo DS Lite * Două dispozitive + **NDS/NDSL-ul sursă**: dispozitivul care este compatibil cu flashcart-ul dumneavoastră + **3DS-ul țintă**: dispozitivul pe firmware stoc -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(fișierul `ntr`; nu`devkit`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * Ultima versiune de [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instrucțiuni diff --git a/_pages/ro_RO/formatting-sd-(linux).txt b/_pages/ro_RO/formatting-sd-(linux).txt new file mode 100644 index 0000000000..aafeac25c3 --- /dev/null +++ b/_pages/ro_RO/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Această pagină este doar pentru utilizatorii de Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instrucțiuni +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/ro_RO/formatting-sd-(mac).txt b/_pages/ro_RO/formatting-sd-(mac).txt new file mode 100644 index 0000000000..de0d6ad767 --- /dev/null +++ b/_pages/ro_RO/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Această pagină este doar pentru utilizatorii de Mac. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instrucțiuni + +#### OS X El Capitan (10.11) and later + +1. Introduceți cardul SD în calculator +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Introduceți cardul SD în calculator +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/ro_RO/formatting-sd-(windows).txt b/_pages/ro_RO/formatting-sd-(windows).txt new file mode 100644 index 0000000000..09b05ce5e9 --- /dev/null +++ b/_pages/ro_RO/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Această pagină este doar pentru utilizatorii de Windows. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Ce aveți nevoie + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instrucțiuni + +1. Introduceți cardul SD în calculator +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/ro_RO/get-started-(new-3ds).txt b/_pages/ro_RO/get-started-(new-3ds).txt index a859d28f9e..7e40f216c9 100644 --- a/_pages/ro_RO/get-started-(new-3ds).txt +++ b/_pages/ro_RO/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Începeți (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="Cuprins" %} ### Lectură obligatorie -Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Asta înseamnă că, de exemplu, rândul "de la 9.0.0 până la 9.2.0" cuprinde 9.0.0, 9.1.0, și 9.2.0. - -În plus, țineți cont că ultimul număr al versiunii sistemului dumneavoastră (care este precedat de o linie) se referă la versiunea browserului. În prezent, versiunea de browser este irelevantă pentru New 3DS în acest ghid. - -**Dacă nu puteți să urmați toate instrucțiunile corespunzătoare versiunii specifice din cauza lipsei de cerințe, atunci ar trebui să vedeți rândul "Toate Versiunile" pentru metode care funcționează indiferent de versiunea de sistem.** - -Pentru toate versiunile puteți de asemenea face [actualizare cu cardul de joc](cart-update) (sau să faceți o actualizare de sistem obișnuită) spre o versiune superioară din aceeași coloană pentru a urma instrucțiunile. +Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului superior din System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Tabel de versiuni - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
De laPână laDe laPână laAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Folosiți o metodă pentru "Toate versiunile"11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Instalând boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
TOATE VERSIUNILE

ntrboot
(Necesită un flashcart compatibil)

sau

Instalând boot9strap (Hardmod)
(Necesită sudură)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/ro_RO/get-started-(old-3ds).txt b/_pages/ro_RO/get-started-(old-3ds).txt index f7343fa7bf..0ca55859df 100644 --- a/_pages/ro_RO/get-started-(old-3ds).txt +++ b/_pages/ro_RO/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "Începeți (Old 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="Cuprins" %} ### Lectură obligatorie -Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Asta înseamnă că, de exemplu, rândul "de la 9.0.0 până la 9.2.0" cuprinde 9.0.0, 9.1.0, și 9.2.0. - -În plus, țineţi cont că ultimele două coloane ale tabelului se referă la ultimul număr al versiunii (care corespunde versiunii browserului instalat pe dispozitiv). Dacă versiunea este -0 atunci nu aveți un browser, în timp ce orice alt număr mai mare decât -0 arată că aveți browser instalat. - -În cazul versiunii "5.0.0-0U" de exemplu, urmăriți coloana "Fără Browser" și rândul 5.0.0 până la 5.1.0 din cauza că sistemul este pe o versiune din acel interval și nu are browserul instalat. - -**Dacă nu puteți să urmați toate instrucțiunile corespunzătoare versiunii specifice din cauza lipsei de cerințe, atunci ar trebui să vedeți rândul "Toate Versiunile" pentru metode care funcționează indiferent de versiunea de sistem.** - -Pentru toate versiunile puteți de asemenea face [actualizare cu un card de joc](cart-update) (sau să faceți o actualizare de sistem obișnuită) spre o versiune superioară din aceeași coloană pentru a urma instrucțiunile. +Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului superior din System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Tabel de versiuni @@ -33,49 +28,23 @@ Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
De la Până laFără BrowserCu BrowserAction
1.0.02.0.0Folosiți o metodă pentru "Toate versiunile"
2.1.02.1.0Folosiți o metodă pentru "Toate versiunile"Installing boot9strap (2xrsa)
2.2.02.2.0Folosiți o metodă pentru "Toate versiunile"
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0 Homebrew Launcher (Soundhax)
11.4.011.7.0Folosiți o metodă pentru "Toate versiunile"Installing boot9strap (Soundhax)
11.8.011.8.0Instalând boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
TOATE VERSIUNILE

ntrboot
(Necesită un flashcart compatibil)

sau

Instalând boot9strap (Hardmod)
(Necesită sudură)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/ro_RO/get-started.txt b/_pages/ro_RO/get-started.txt index ea34f1e11a..c9fee59a59 100644 --- a/_pages/ro_RO/get-started.txt +++ b/_pages/ro_RO/get-started.txt @@ -6,85 +6,16 @@ title: "Începeți" ### Lectură obligatorie -Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Asta înseamnă că, de exemplu, rândul "de la 9.0.0 până la 9.2.0" cuprinde 9.0.0, 9.1.0, și 9.2.0. - -Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului superior din System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**Dacă nu puteți să urmați toate instrucțiunile corespunzătoare versiunii specifice din cauza lipsei de cerințe, atunci ar trebui să actualizați spre ultima versiune sau să folosiți rândul "Toate Versiunile" pentru metode care funcționează indiferent de versiunea de sistem.** - -Pentru toate versiunile puteți de asemenea face [actualizare cu un card de joc](cart-update) (sau să faceți o actualizare de sistem obișnuită) spre o versiune superioară din aceeași coloană pentru a urma instrucțiunile. - -Dacă v-ați modat deja 3DS-ul înainte și aveți instalat un CFW bazat pe EmuNAND, urmați toate instrucțiunile în SysNAND. Înlocuiţi orice fişiere care există deja. Datele dumneavoastră vor fi transferate de pe EmuNAND pe noua instalare de B9S la sfărșit. Dacă folosiți menuhax, ar trebui să [curățați exdata-ul meniului Home](troubleshooting#clear-home-menu-extdata) pentru a-l elimina înainte de a începe. - -Această pagină este pentru instrucţiuni despre cum să instalaţi boot9strap pe un 3DS sau 2DS din *stoc*. Dacă aveţi deja arm9loaderhax instalat şi vreți să actualizați către boot9strap, urmaţi [A9LH către B9S](a9lh-to-b9s). -{: .notice--primary} - -Înainte să începeți, utilizatorii de Windows ar trebui să activeze opțiunea de a arăta extensiile de fișier folosind [Extensii de fișier (Windows)](file-extensions-(windows))! -{: .notice--info} - -Înainte să începeți, este de dorit să vă verificați cardul SD pentru erori folosind [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), sau [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Tabel de versiuni - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
De laPână laAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
TOATE VERSIUNILE

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/ro_RO/godmode9-usage.txt b/_pages/ro_RO/godmode9-usage.txt index a91adfcdd3..8b59d97c33 100644 --- a/_pages/ro_RO/godmode9-usage.txt +++ b/_pages/ro_RO/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "Folosind GodMode9" {% include toc title="Cuprins" %} -Pentru suport (în engleză) cu GodMode9, precum și ajutor cu scripting şi a obţine actualizări şi informaţii, alăturați-vă [serverului GodMode9 pe Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Lectură obligatorie diff --git a/_pages/ro_RO/home.txt b/_pages/ro_RO/home.txt index 15ac91e571..4077667945 100644 --- a/_pages/ro_RO/home.txt +++ b/_pages/ro_RO/home.txt @@ -63,7 +63,7 @@ Pentru o listă cu fiecare dintre semnăturile calculate de sighax, vedeți [ace ## Ce pot face cu Custom Firmware? + Puteți juca toate cardurile de joc și jocurile din eShop, indiferent de regiunea lor -+ Puteți personaliza Meniul HOME cu [teme și ecrane splash create de utilizatori](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Puteți să folosiți "Hack-uri de ROM" pentru jocurile pe care le dețineti + Puteți face capturi de ecran la aplicații sau gameplay + Puteți salva, edita și recupera progresul din mai multe jocuri @@ -78,11 +78,11 @@ Pentru o listă cu fiecare dintre semnăturile calculate de sighax, vedeți [ace + **Inainte să începeți acest ghid, trebuie să știți riscurile modării unui 3DS: DE FIECARE DATĂ când vă modificați sistemul, există întotdeauna potențialul de a face un brick IRECUPERABIL. Este rar, dar există o posibilitate așa că aveți grijă să urmați TOATE instrucțiunile cu EXACTITATE.** + Daca v-ați modat deja 3DS-ul înainte pentru a avea o configurare de tip EmuNAND și doriți să mutați conținutul lui pe noul CFW SysNAND, va trebui să urmați toate instrucțiunile și să restaurați EmuNAND-ul vostru existent atunci când ajungeți la [Finalizând instalarea](finalizing-setup). -+ Acest ghid va merge pe New 3DS, Old 3DS, și 2DS în toate regiunile cu firmware 11.13.0 sau inferior. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Dacă totul merge așa cum trebuie, nu o să pierdeți nimic și o să ajungeți să aveți toate lucrurile cu care ați început (jocurile, NNID, salvările, etc. vor fi păstrate). + Țineți dispozitivul conectat și încărcat pe toată durata procedeului pentru a evita pierderea de date sau daune de la o închidere neașteptată! + Cardul SD ar trebui să fie [MBR, nu GPT](http://www.howtogeek.com/245610/) (cardul SD care vine cu dispozitivul va fi MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ Dacă aveți nevoie să formatați un card SD nou, puteți să folosiți [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) și să setați Dimensiunea Unității de Alocare la 32K(32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + Old 2DS este, în esenţă, identic cu Old 3DS în ceea ce priveşte software-ul, în timp ce New 2DS este identic cu New 3DS în ceea ce priveşte software-ul. Orice pas care spune "Old 3DS" se aplică de asemenea la Old 2DS, şi orice pas care spune "New 3DS" se aplică de asemenea la New 2DS. ___ diff --git a/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt b/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt index 751a4d8f58..487f25a45c 100644 --- a/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Cuprins" %} - -### Lectură obligatorie - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### Ce aveți nevoie - -* Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instrucțiuni - -#### Secțiunea I - Preparații - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Așteptați până când procesul este terminat - + If it displays a yellow screen, power your console off, then try this section again -1. În cazul în care exploit-ul a mers, dispozitivul va încărca Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ro_RO/homebrew-launcher-(pichaxx).txt b/_pages/ro_RO/homebrew-launcher-(pichaxx).txt index 035f8d19b9..f42be43d43 100644 --- a/_pages/ro_RO/homebrew-launcher-(pichaxx).txt +++ b/_pages/ro_RO/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Cuprins" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectură obligatorie Această metodă de a folosi Seedminer pentru mai multă exploatare utilizează fişierul `movable.sed` pentru a avea acces la Homebrew Launcher folosind exploit-ul PicHaxx în sensul de a injecta un titlu DSiWare exploatabil în aplicaţia DS Download Play. Această metodă are nevoie ca dumneavoastră să dețineți (sau să descărcați) jocul gratuit "Pokemon Picross" de pe eShop. -Dacă dispozitivul dumneavoastră are deja acces la Homebrew Launcher (fie prin PicHaxx sau alte metode), puteți sări la [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} Dacă aveți deja Pokemon Picross, această procedură va rescrie fișierul de salvare a jocului! @@ -19,7 +22,8 @@ Dacă aveți deja Pokemon Picross, această procedură va rescrie fișierul de s * Jocul gratuit de pe eShop "Pokemon Picross" * Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer) * Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* [Payload-ul otherapp](https://deadphoenix8091.github.io/3ds/#otherapp) *(pentru versiunea și regiunea dumneavoastră)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instrucțiuni @@ -27,26 +31,26 @@ Dacă aveți deja Pokemon Picross, această procedură va rescrie fișierul de s 1. Copiați `boot.3dsx` în rădăcina cardului SD 1. Copiați payload-ul otherapp în rădăcina cardului SD și redenumiți-l în`otherapp.bin` - + Dacă nu vedeți extensia `.bin`, nu o adăugați la sfârșitul numelui extensiei + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Creați un folder numit `3ds` în rădăcina cardului SD dacă nu există deja #### Secțiunea II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Selectaţi fişierul `movable.sed` 1. Selectați "Build and Download" (Construiește și descarcă) 1. Așteptați până când procesul este terminat -1. Navigaţi la `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` pe cardul SD - + Acest `` va fi la fel ca cel care l-ați folosit în [Seedminer](seedminer) - + Acest folder `` va fi încă un folder de 32 de caractere din interiorul folderului `` -1. Copiați noul fişier de salvare `00000001.sav` descărcat în folderul `data` de pe cardul SD +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Suprascrieți vechiul fişier de salvare când vi se solicită 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul 1. Porniți "Pokemon Picross" 1. În cazul în care exploit-ul a mers, dispozitivul va încărca Homebrew Launcher - + E posibil să apară o eroare care spune că nu s-au găsit aplicații. -1. Închideți dispozitivul. + + You may see an error stating there are no applications found +1. Închideți dispozitivul ___ diff --git a/_pages/ro_RO/homebrew-launcher-(soundhax).txt b/_pages/ro_RO/homebrew-launcher-(soundhax).txt index 537c4e8038..ee05d8fc39 100644 --- a/_pages/ro_RO/homebrew-launcher-(soundhax).txt +++ b/_pages/ro_RO/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Asigurați-vă că dispozitivul are pornit comunicarea fără fir pentru că uds Țineți cont că actualizările cu cardul vor aduce actualizări numai funcțiilor de bază, cum ar fi System Settings, Meniul HOME, etc. actualizările cu cardul de joc nu vor aduce actualizări la Nintendo 3DS Sound și serviciilor de rețea, cum ar fi System Transfer, Internet Browser, StreetPass Mii Plaza, sau eShop. -Asta înseamnă că folosind o actualizare cu card de joc de la o versiune care conține o versiune de Nintendo 3DS Sound inferioară *(<3.0.0)* către una care are o versiune Nintendo 3DS Sound superioară va strica Soundhax! Veţi avea nevoie de o [metodă alternativă](homebrew-launcher-(alternatives)) pentru a intra în Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Veţi avea nevoie de o [metodă alternativă](homebrew-launcher-(alternatives)) pentru a intra în Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ Asta înseamnă că folosind o actualizare cu card de joc de la o versiune care ### Ce aveți nevoie * Ultima versiune de [Soundhax](http://soundhax.com) *(pentru dispozitivul, versiunea și regiunea dumneavoastră)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * Ultima versiune de [safehax](https://github.com/TiniVi/safehax/releases/latest) *(fișierul `.3dsx`)* * Cea mai recentă versiune de [udsploit](https://github.com/smealum/udsploit/releases/latest) -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) -* [Payload-ul otherapp](https://smealum.github.io/3ds/#otherapp) *(pentru versiunea și regiunea dumneavoastră)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instrucțiuni diff --git a/_pages/ro_RO/homebrew-launcher-(steelhax).txt b/_pages/ro_RO/homebrew-launcher-(steelhax).txt index 41d7ef345b..65ec1b9a69 100644 --- a/_pages/ro_RO/homebrew-launcher-(steelhax).txt +++ b/_pages/ro_RO/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Cuprins" %} - -### Lectură obligatorie - -Această metodă de a folosi Seedminer pentru mai multă exploatare utilizează fişierul `movable.sed` pentru a avea acces la Homebrew Launcher folosind exploit-ul Steelhax în sensul de a injecta un titlu DSiWare exploatabil în aplicaţia DS Download Play. Această metodă are nevoie ca dumneavoastră să dețineți (sau să descărcați) jocul gratuit "Steel Diver: Sub Wars" de pe eShop. - -Dacă dispozitivul dumneavoastră are deja acces la Homebrew Launcher (fie prin Steelhax sau alte metode), puteți sări la [DSiWare Dumper](dsidumper)). -{: .notice--success} - -Dacă aveți deja Steel Diver: Sub Wars, acest procedeu va rescrie fișierul de salvare a jocului! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### Ce aveți nevoie - -* Jocul gratis de pe eShop "Steel Diver: Sub Wars" -* Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer) -* Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* Ultima versiune de [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* [Payload-ul otherapp](https://deadphoenix8091.github.io/3ds/#otherapp) *(pentru versiunea și regiunea dumneavoastră)* - -### Instrucțiuni - -#### Secțiunea I - Preparații - -1. Creați un folder numit `3ds` în rădăcina cardului SD dacă nu există deja -1. Copiați `boot.3dsx` în rădăcina cardului SD -1. Copiați folderul `steelhax` din arhiva `Steelhax-release.zip` pe rădăcina cardului SD -1. Copiați payload-ul otherapp în folderul `steelhax` de pe cardul SD și redenumiți-l în`payload.bin` - -#### Secțiunea II - Steelminer - -1. Introduceţi cardul SD în dispozitiv -1. Lansați "Steel Diver: Sub Wars" o dată şi selectaţi un Mii pentru a iniția fișierul de salvare - + Respingeți actualizarea de joc atunci când vi se solicită - + Dacă aţi actualizat deja jocul, folosiți meniul de Data Management de la System Settings pentru a șterge actualizarea -1. Ieșiți din "Steel Diver: Sub Wars" -1. Închideți dispozitivul -1. Introduceți cardul SD în calculator -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Selectaţi fişierul `movable.sed` -1. Selectați "Start!" -1. Așteptați până când procesul este terminat -1. Navigaţi la`Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `` -> `data` pe cardul SD - + **Regiunea EUR**: `000d7e00` - + **Regiunea JPN**: `000d7c00` - + **Regiunea USA**: `000d7d00` -1. Copiați noul fişier de salvare descărcat în folderul `data` de pe cardul SD - + Suprascrieți vechiul fişier de salvare când vi se solicită -1. Reintroduceți cardul SD în dispozitivul dumneavoastră -1. Porniți dispozitivul -1. Lansați "Steel Diver: Sub Wars" -1. În cazul în care exploit-ul a mers, dispozitivul va încărca Homebrew Launcher - + E posibil să apară o eroare care spune că nu s-au găsit aplicații. -1. Închideți dispozitivul. - -___ - -### Continuați la [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/ro_RO/installing-boot9strap-(browser).txt b/_pages/ro_RO/installing-boot9strap-(browser).txt index ea804a3781..5138036beb 100644 --- a/_pages/ro_RO/installing-boot9strap-(browser).txt +++ b/_pages/ro_RO/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Instalând boot9strap (Browser)" {% include toc title="Cuprins" %} +### Lectură obligatorie + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### Ce aveți nevoie +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrucțiuni @@ -16,24 +24,21 @@ title: "Instalând boot9strap (Browser)" 1. Închideți dispozitivul 1. Introduceți cardul SD în calculator +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD 1. Creați un folder numit 'boot9strap' pe rădăcina cardului SD -1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD -1. Copiați `SafeB9SInstaller.dat` și `Launcher.dat` din arhiva `.zip` SafeB9SInstaller în rădăcina cardului SD - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul #### Secțiunea II - Lansând SafeB9SInstaller -1. Porniți browserul și mergeți la una dintre următoarele URL-uri pe dispozitivul dumneavoastră - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Asigurați-vă că încercați fiecare URL dacă primul nu funcționează (unele versiuni nu îl pot folosi pe primul, iar altele nu le pot folosi pe ultimele două) +1. Porniți dispozitivul +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + Dacă primiți o eroare, [urmați acest ghid de depanare](troubleshooting#a-browser-based-exploit-is-not-working) 1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Instalând boot9strap (Browser)" 1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: + **"Show NAND or user string in System Settings"** 1. Apăsați (Start) pentru a salva și reporni - + Dacă primiţi o eroare, doar continuați spre pagina următoare ___ diff --git a/_pages/ro_RO/installing-boot9strap-(fredtool).txt b/_pages/ro_RO/installing-boot9strap-(fredtool).txt index 51e4eb17b3..67fe450aed 100644 --- a/_pages/ro_RO/installing-boot9strap-(fredtool).txt +++ b/_pages/ro_RO/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Instalând Boot9strap (Fredtool)" {% include toc title="Cuprins" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectură obligatorie Această metodă de a folosi Seedminer pentru mai multă exploatare utilizează fişierul `movable.sed` pentru a decripta orice titlu de DSiWare cu scopul de a injecta un titlu DSiWare exploatabil în aplicaţia DS Internet Settings. Aceasta are nevoie de o copie de rezervă DSiWare, de exemplu de la BannerBomb sau unealta DSiWare Dumper. @@ -12,11 +15,11 @@ Acest lucru este în prezent o implementare a exploit-ului "Partiții FIRM de te ### Ce aveți nevoie -* O copie de rezervă DsiWare (precum acela de pe rădăcina cardului SD din [BannerBomb3](bannerbomb3) sau [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer) * Cea mai nouă versiune de [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * Cea mai recentă versiune de [b9sTool] (https://github.com/zoogie/b9sTool/releases/latest) -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Secțiunea I - Preparații @@ -28,18 +31,18 @@ Acest lucru este în prezent o implementare a exploit-ului "Partiții FIRM de te #### Secțiunea II - Fredtool -1. Deschideți [Fredtool](https://fredtool.bruteforcemovable.com/) pe calculatorul dumneavoastră +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Selectaţi fişierul `movable.sed` pentru câmpul "Your movable.sed" 1. Selectați copia de rezervă DsiWare (`<8-character-id>.bin`) în câmpul "Your dsiware.bin" 1. Finalizați captcha-ul "I'm not a robot" 1. Selectați "Start" 1. Așteptați până când procesul este terminat 1. Când procesul s-a completat, descărcați arhiva modificată DSiWare de pe site - + Acest fișier conține 2 fișiere de copie de rezervă DSiWare, una curată (nemodificată) și una modată (exploatată) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigați spre `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` pe cardul SD - + Acest `` va fi la fel ca cel care l-ați folosit în [Seedminer](seedminer) - + Acest folder `` va fi încă un folder de 32 de caractere din interiorul folderului `` - + Dacă folderul `Nintendo DSiWare` nu există, creați unul în interiorul folderului `` + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copiaţi fişierul `42383841.bin` din folderul `output/hax/` de la DSiWare-ul descărcat (`fredtool_output.zip`) către folderul `Nintendo DSiWare/` de pe cardul SD 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul @@ -87,7 +90,7 @@ Dacă preferați un ghid vizual pentru aceasta secțiune, deja este disponibil u 1. Închideți dispozitivul 1. Introduceți cardul SD în calculator -1. Copiaţi fişierul `42383841.bin` din folderul `output/clean/` de la DSiWare-ul descărcat (`fredtool_output.zip`) către folderul `Nintendo 3DS///Nintendo DSiWare/` de pe cardul SD +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Înlocuiţi fişierul existent `42383841.bin 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul diff --git a/_pages/ro_RO/installing-boot9strap-(frogtool).txt b/_pages/ro_RO/installing-boot9strap-(frogtool).txt index 898ac162d1..2dec7ab934 100644 --- a/_pages/ro_RO/installing-boot9strap-(frogtool).txt +++ b/_pages/ro_RO/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Instalând Boot9strap (Frogtool)" {% include toc title="Cuprins" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectură obligatorie Acum vom folosi accesul la Homebrew Launcher pentru a porni aplicația Frogtool și injecta versiuna japoneză a titlului "Flipnote Studio", care vom folosi ulterior pentru a porni b9sTool și instala boot9strap. @@ -18,14 +21,14 @@ Pentru a folosi linkurile [magnetice](https://wikipedia.org/wiki/Magnet_URI_sche * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * Cea mai nouă versiune de [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * Cea mai recentă versiune de [b9sTool] (https://github.com/zoogie/b9sTool/releases/latest) -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Secțiunea I - Preparații 1. Introduceți cardul SD în calculator 1. Copiați fișierul `movable.sed` in rădăcina cardului SD 1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD -1. Copiați `boot.nds` (B9STool) de la b9sTool `.zip` pe rădăcina cardului SD +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copiați `Frogtool.3dsx` în folderul `/3ds/` de pe cardul SD 1. Copiați `frogcert.bin` în rădăcina cardului SD 1. Reintroduceți cardul SD în dispozitivul dumneavoastră @@ -74,6 +77,26 @@ Dacă preferați un ghid vizual pentru aceasta secțiune, deja este disponibil u 1. Apăsați (Start) pentru a salva și reporni + Dispozitivul ar trebui să încarce meniul HOME după o scurtă vreme. Dacă vedeți un ecran negru mai mult de 5 secunde, [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Lansați aplicația Download Play (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Așteptați până când vedeți două butoane + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Selectați "Miscellaneous options" +1. Selectați "Switch the hb. title to the current app" +1. Apăsați (B) pentru a continua +1. Apăsați (B) ca să vă întoarceți la meniul principal Rosalina +1. Apăsați (B) pentru a ieși din meniul Rosalina +1. Apăsați (Home), apoi închideți Download Play +1. Relaunch the Download Play application +1. Dispozitivul dumneavoastră ar trebui să încarce Hombrew Launcher-ul +1. Lansați Frogtool din lista de homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Odată ce operația s-a terminat, citiți ecranele și verificați dacă procesul a avut succes + + Dacă există erori sau vreun fișier lipsă, corectați problema și încercați din nou +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continuați la [Finalizând instalarea](finalizing-setup) diff --git a/_pages/ro_RO/installing-boot9strap-(hardmod).txt b/_pages/ro_RO/installing-boot9strap-(hardmod).txt index 5d8fac5a07..b4c1f34fe7 100644 --- a/_pages/ro_RO/installing-boot9strap-(hardmod).txt +++ b/_pages/ro_RO/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ Aceasta va funcționa pe New 3DS, New 2DS, Old 3DS și Old 2DS pe *toate* versiu * Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* * Cea mai recentă versiune de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Utilizatorii Windows pot folosi fișierul compilat `.exe`, în timp ce utilizatori de Mac și Linux vor avea nevoie de [Python 3](https://www.python.org/downloads/) instalat ca să poată rula `.py` -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * Fișierul `.firm` corespunzător cu dispozitivul și versiunea dumneavoastră: | Versiune(i) | Kernel | Old 3DS sau Old 2DS| New 3DS sau New 2DS | diff --git a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt index 4af77c611e..a42d09cecd 100644 --- a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Cuprins" %} - -### Lectură obligatorie - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japonia și Coreea, indicate de literele U, E, J, sau K după versiunea de sistem. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### Ce aveți nevoie - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Secțiunea I - Preparații - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Secțiunea III - Configurând Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: - + **"Show NAND or user string in System Settings"** -1. Apăsați (Start) pentru a salva și reporni - + Dispozitivul ar trebui să încarce meniul HOME după o scurtă vreme. Dacă vedeți un ecran negru mai mult de 5 secunde, [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Lansați aplicația Download Play -1. Așteptați până când vedeți două butoane - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Selectați "Miscellaneous options" -1. Selectați "Switch the hb. title to the current app" -1. Apăsați (B) pentru a continua -1. Apăsați (B) ca să vă întoarceți la meniul principal Rosalina -1. Apăsați (B) pentru a ieși din meniul Rosalina -1. Apăsați (Home), apoi închideți Download Play -1. Relaunch the Download Play application -1. Dispozitivul dumneavoastră ar trebui să încarce Hombrew Launcher-ul -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continuați la [Finalizând instalarea](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt index 4e17d5431a..6ced40cea2 100644 --- a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt +++ b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ Pentru a folosi linkurile [magnetice](https://wikipedia.org/wiki/Magnet_URI_sche * Un magnet care declanșează modul de suspendare al dispozitivului (dacă se folosește un dispozitiv care se pliază) * Flashcart-ul cu ntrboot instalat * Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrucțiuni #### Secțiunea I - Preparații 1. Închideți dispozitivul -1. Introduceți cardul SD al dispozitivului în calculator +1. Insert your console's SD card into your computer + Acesta este cardul SD de pe 3DS-ul dumneavoastră, *nu* cardul SD de pe flashcart -1. Copiați `SafeB9SInstaller.firm` pe rădăcina cardului SD și redenumiți în `boot.firm` -1. Copiați `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD -1. Creați un folder numit 'boot9strap' pe rădăcina cardului SD -1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reintroduceți cardul SD în dispozitivul dumneavoastră +1. Reinsert your SD card into your 3DS 1. Porniți dispozitivul #### Secțiunea II - ntrboot diff --git a/_pages/ro_RO/installing-boot9strap-(pichaxx).txt b/_pages/ro_RO/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..5da410933d --- /dev/null +++ b/_pages/ro_RO/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Cuprins" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Lectură obligatorie + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### Ce aveți nevoie + +* The game "Pokémon Picross" (free on eShop) +* Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer) +* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instrucțiuni + +#### Secțiunea I - Preparații + +1. Închideți dispozitivul +1. Introduceți cardul SD în calculator +1. Copy `otherapp.bin` to the root of your SD card +1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD +1. Creați un folder numit 'boot9strap' pe rădăcina cardului SD +1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Secțiunea II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Selectaţi fişierul `movable.sed` +1. Selectați "Build and Download" (Construiește și descarcă) +1. Așteptați până când procesul este terminat +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Suprascrieți vechiul fişier de salvare când vi se solicită +1. Reintroduceți cardul SD în dispozitivul dumneavoastră +1. Porniți dispozitivul +1. Porniți "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Secțiunea III - Instalând boot9strap + +1. Așteptaţi ca toate verificările de siguranță să fie completate +1. Când vi se solicită, introduceți combinația de butoane ca să instalați boot9strap +1. Odată terminat, apăsați (A) pentru a reporni dispozitivul + +#### Secțiunea IV - Configurând Luma3DS + +1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS + + Dacă vedeți un ecran negru [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: + + **"Show NAND or user string in System Settings"** +1. Apăsați (Start) pentru a salva și reporni + + Dacă primiţi o eroare, doar continuați spre pagina următoare + +___ + +### Continuați la [Finalizând instalarea](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ro_RO/installing-boot9strap-(safecerthax).txt b/_pages/ro_RO/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..caac0aecca --- /dev/null +++ b/_pages/ro_RO/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### Ce aveți nevoie + +* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instrucțiuni + +#### Secțiunea I - Preparații +1. Închideți dispozitivul +1. Introduceți cardul SD în calculator +1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD +1. Creați un folder numit 'boot9strap' pe rădăcina cardului SD +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reintroduceți cardul SD în dispozitivul dumneavoastră +1. Porniți dispozitivul + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Închideți dispozitivul + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Așteptaţi ca toate verificările de siguranță să fie completate +1. Când vi se solicită, introduceți combinația de butoane ca să instalați boot9strap +1. Odată terminat, apăsați (A) pentru a reporni dispozitivul + +#### Section V - Configuring Luma3DS + +1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS + + Dacă vedeți un ecran negru [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: + + **"Show NAND or user string in System Settings"** +1. Apăsați (Start) pentru a salva și reporni + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Închideți dispozitivul + +___ + +### Continuați la [Finalizând instalarea](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ro_RO/installing-boot9strap-(soundhax).txt b/_pages/ro_RO/installing-boot9strap-(soundhax).txt index 8c903ad4fd..1b2327bd30 100644 --- a/_pages/ro_RO/installing-boot9strap-(soundhax).txt +++ b/_pages/ro_RO/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Instalând boot9strap (Soundhax)" ### Lectură obligatorie -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Țineți cont că actualizările cu cardul vor aduce actualizări numai funcțiilor de bază, cum ar fi System Settings, Meniul HOME, etc. actualizările cu cardul de joc nu vor aduce actualizări la Nintendo 3DS Sound și serviciilor de rețea, cum ar fi System Transfer, Internet Browser, StreetPass Mii Plaza, sau eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Veţi avea nevoie de o metodă alternativă de a intra în Homebrew Launcher cum ar fi [Instalând boot9strap (Browser)](installing-boot9strap-(browser)) sau [Instalând boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### Ce aveți nevoie * Ultima versiune de [Soundhax](http://soundhax.com) *(pentru dispozitivul, versiunea și regiunea dumneavoastră)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) -* Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* Cea mai recentă versiune de [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(fișierul `.bin` care corespunde versiunii de firmware)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instrucțiuni @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Închideți dispozitivul 1. Introduceți cardul SD în calculator 1. Copiați fișierul Soundhax `.m4a` în rădăcina cardului SD -1. Copiați payload-ul pre9otherapp în rădăcina cardului SD și redenumiți-l în`otherapp.bin` -1. Copiați `boot.firm` de la Luma3DS `.zip` pe rădăcina cardului SD -1. Copiați `boot.3dsx` în rădăcina cardului SD +1. Copy `otherapp.bin` to the root of your SD card +1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD 1. Creați un folder numit 'boot9strap' pe rădăcina cardului SD 1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD -1. Copiați `arm.bin` de pe arhiva `zip` SafeB9SInstaller în rădăcina cardului SD +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + În această situație, pornind Soundhax imediat ar face ca aceste sfaturi să apăra de fiecare dată când porniți Nintendo 3DS Sound până când faceți ce vi se cere 1. Mergeți în `/SDCARD`, apoi apăsați "<3 nedwill 2016" + S-ar putea să fie nevoie să încercați de mai multe ori - + Dacă se blochează, închideți dispozitivul forțat ținând apăsat butonul de pornire și încercați din nou + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ro_RO/installing-boot9strap-(ssloth-browser).txt b/_pages/ro_RO/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..4a0e34d485 --- /dev/null +++ b/_pages/ro_RO/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### Ce aveți nevoie + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Secțiunea I - Preparații + +1. Închideți dispozitivul +1. Introduceți cardul SD în calculator +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD +1. Creați un folder numit 'boot9strap' pe rădăcina cardului SD +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reintroduceți cardul SD în dispozitivul dumneavoastră +1. Porniți dispozitivul + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Închideți dispozitivul + +#### Section III - Launching SafeB9SInstaller +1. Porniți dispozitivul +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + Dacă primiți o eroare, [urmați acest ghid de depanare](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. Dacă exploit-ul a avut succes, veți porni în SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Așteptaţi ca toate verificările de siguranță să fie completate +1. Când vi se solicită, introduceți combinația de butoane ca să instalați boot9strap +1. Odată terminat, apăsați (A) pentru a reporni dispozitivul + +#### Section V - Configuring Luma3DS + +1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS + + Dacă vedeți un ecran negru [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: + + **"Show NAND or user string in System Settings"** +1. Apăsați (Start) pentru a salva și reporni + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Închideți dispozitivul + +___ + +### Continuați la [Finalizând instalarea](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/ro_RO/installing-boot9strap-(usm).txt b/_pages/ro_RO/installing-boot9strap-(usm).txt index d0f1a3ec17..d32ee58ef6 100644 --- a/_pages/ro_RO/installing-boot9strap-(usm).txt +++ b/_pages/ro_RO/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Cuprins" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Lectură obligatorie In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japonia și Coreea, indicate de literele U, E, J, sau K după versiunea de sistem. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### Ce aveți nevoie * Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Secțiunea I - Preparații -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Încărcați fișierul movable.sed folosind opțiunea "Choose File" 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. Dacă dispozitivul este pornit, închideți-l + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Introduceți cardul SD în calculator 1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigați spre `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` pe cardul SD - + Acest `` va fi la fel ca cel care l-ați folosit în [Seedminer](seedminer) - + Dacă `Nintendo DSiWare` nu există, creați-l + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigați spre `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` pe cardul SD + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. Dacă există orice fișier de copie de rezervă DSiWare (`<8-character-id>.bin`) în acest folder, mutați-l în calculator + Acesta vă va lăsa cu un folder gol de Nintendo DSiWare. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Secțiunea IV - Configurând Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigați spre `Data Management` -> `DSiWare` 1. Faceți click pe secțiunea SD Card + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Închideți dispozitivul 1. Introduceți cardul SD în calculator -1. Navigați spre `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` pe cardul SD - + Acest `` va fi la fel ca cel care l-ați folosit în [Seedminer](seedminer) +1. Navigați spre `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` pe cardul SD 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/ro_RO/legacy-methods.txt b/_pages/ro_RO/legacy-methods.txt index 18bb8554fe..37d8dc49ee 100644 --- a/_pages/ro_RO/legacy-methods.txt +++ b/_pages/ro_RO/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### Probă pentru DS Internet Settings (folosit pentru Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/ro_RO/ntrboot.txt b/_pages/ro_RO/ntrboot.txt index 0edbeb18c6..b44c684425 100644 --- a/_pages/ro_RO/ntrboot.txt +++ b/_pages/ro_RO/ntrboot.txt @@ -17,23 +17,23 @@ Deși exploit-ul ntrboot merge indiferent de versiunea de sistem, ntrboot flashe | Nume de Flashcart | Preţul Curent | Are "Bombă cu Ceas"? | Versiuni de 3DS? | Versiuni de DSi? | Alte note | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | **Vine cu ntrboot preinstalat**; se poate schimba înapoi spre un flashcart de NDS obișnuit. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | Nu | <= 11.13.0 | <= 1.4.5 | **Vine cu ntrboot preinstalat** ([are un întrerupător intern pentru a comuta între modurile ntrboot și NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); nu instalați ntrboot manual. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | Nu | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | Nu | <= 11.13.0 | <= 1.4.5 | Toate reviziile de RTS sunt compatibile. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | Toate flashcart-urile R4iSDHC 20XX sunt identice. modelele 2013 sunt incompatibile. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | Toate flashcart-urile R4iSDHC 20XX sunt identice. modelele 2013 sunt incompatibile. | -| **Ace3DS X** | | Nu | <= 11.13.0 | <= 1.4.5 | **Vine cu ntrboot preinstalat** (are un întrerupător extern pentru a comuta între modurile ntrboot ("3DS") și NDS); nu instalați ntrboot manual. | -| **Ace3DS Plus** || Nu | <= 11.13.0 | <= 1.4.5 || +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. modelele 2013 sunt incompatibile. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. modelele 2013 sunt incompatibile. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | Nu | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | Nu | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | Nu | Niciuna | Niciuna | | | **R4i Gold 3DS Deluxe "Starter"** | | Nu | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | Nu | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Necunoscut | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | Toate flashcart-urile R4iSDHC 20XX sunt identice. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ro_RO/region-changing.txt b/_pages/ro_RO/region-changing.txt index b09187e8ff..532bd1e6e8 100644 --- a/_pages/ro_RO/region-changing.txt +++ b/_pages/ro_RO/region-changing.txt @@ -17,7 +17,7 @@ Pentru a folosi linkurile [magnetice](https://wikipedia.org/wiki/Magnet_URI_sche Acest proces vă va deconecta NNID-ul din sistem, deoarece nu va mai fi compatibil în continuare. NNID-urile sunt blocate pe regiunea dispozitivului care le-a creat, şi nu pot fi transferate între regiuni fără [un proces foarte complicat si avansat](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -După acest proces, numai **New 3DS-urile care nu au accesat niciodată eShop-ul înainte** şi **toate Old 3DS-urile** vor trebui să acceseze eShop-ul după ce vor crea un NNID nou în noua lor regiune. New 3DS-urile cu regiune schimbată care deja au accesat eShop-ul pe regiunile originale nu pot crea un nou NNID și nu vor putea accesa eShop-ul pe noua regiune! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Reţineţi că ocazional eShop-ul în mod inexplicabil nu va mai funcţiona pe dispozitivele pe care ar trebui să funcţioneze. Acest lucru are în totalitate de a face cu serverele Nintendo, şi nu am nici un control asupra lor. În plus, ţineţi cont că ocazional eShop-ul va funcţiona în mod inexplicabil pe dispozitive pe care ar trebui să nu funcționeze (cum ar fi unele New 3DS-uri). Motivul pentru acest lucru este necunoscut. @@ -55,12 +55,34 @@ TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi. 1. Copiați `FBI.3dsx` în folderul `/3ds/` de pe cardul SD 1. Reintroduceți cardul SD în dispozitiul dumneavoastră -#### Secțiunea II - CTRTransfer - +#### Section II - NAND Backup 1. Lansați GodMode9 ținând apăsat (Start) în timpul pornirii 1. Dacă vi se cere să faceți o copie de rezervă a fișierelor esențiale, apăsați (A) pentru a o realiza, apoi apăsați (A) ca să continuați după ce s-a terminat 1. Dacă vi se cere să reparați dara și ora RTC, apăsați (A) pentru a efectua, apoi setați data și ora, apoi apăsați (A) pentru a continua + Țineți cont că, dacă trebuiați să reparați data și ora, va trebui să reparați ora în System Settings de asemenea după completarea acestui ghid +1. Apăsați (Home) pentru a arăta meniul de acțiuni +1. Selectați "Scripts..." +1. Selectaţi "GM9Megascript" +1. Selectaţi "Backup Options" +1. Selecciona "SysNAND Backup" +1. Apăsați (A) pentru a confirma + + Acest proces va lua ceva timp + + Dacă primiţi o eroare, asiguraţi-vă că aveţi cel puţin 1.3GB de spaţiu liber pe cardul SD +1. Apăsați (A) pentru a continua +1. Apăsați (B) ca să vă întoarceți în meniul principal +1. Selectaţi "Exit" +1. Apăsați (A) ca să reblocați permisiunile de scriere dacă vi se cere +1. Țineți apăsat (R) și apăsați (B) în același timp pentru a scoate cardul SD +1. Introduceți cardul SD în calculator +1. Copiați `__sysnand_###.bin` și `essential.exefs` din folderul `/gm9/out/` de pe cardul SD într-o locaţie sigură pe calculator + + Faceți copii de rezervă în mai multe locații (cum ar fi stocări online ale fișierelor) + + Aceste copii de rezervă vă va salva de un brick și/sau vă va ajuta să recuperați fișierele dintr-o imagine NAND dacă ceva merge în neregulă pe viitor +1. Ştergeţi `_ _sysnand_ ###.bin` şi `_ _sysnand_ ###.bin.sha` din folderul `/ gm9/out /` de pe cardul SD după copiere +1. Reintroduceți cardul SD în dispozitivul dumneavoastră + + În cazul în care cardul SD nu a fost detectat, ţineţi apăsat (R) şi apăsaţi (B) în acelaşi timp pentru a-l remonta + +#### Section III - CTRTransfer + 1. Navigați spre `[0:] SDCARD` -> `gm9` 1. Apăsați (A) pe CTRTransfer `.bin` pantru a-l selecta 1. Selectați "CTRNAND options..." @@ -87,7 +109,7 @@ TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi. + Actualizările în timp ce folosiți B9S + Luma (ce aveți) sunt sigure + Dacă aceasta vă dă o eroare, setați setările de DNS pe "auto" -#### Secțiunea III - Lansând FBI +#### Section IV - Launching FBI 1. Lansați aplicaţia Download Play (această [iconiță]({{"/images/download-play-icon.png" | absolute_url}}) 1. Apăsați (L) + (Jos) + (Select) în același timp ca să deschideți meniul Rosalina @@ -100,7 +122,7 @@ TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi. 1. Lansați aplicația Download Play 1. Dispozitivul dumneavoastră ar trebui să încarce Hombrew Launcher-ul -#### Secțiunea IV - Reinstalând ticket-ele +#### Section V - Reinstalling Tickets Dacă scriptul care nu a găsit tichete de utilizator v-a zis să săriți peste această secțiune, faceți cum vi se cere {: .notice--info} @@ -120,14 +142,14 @@ Dacă scriptul care nu a găsit tichete de utilizator v-a zis să săriți peste + Apăsați (B) pentru a refuza instalarea tichetelor din CDN. 1. Apăsați (Home) pentru a ieși din FBI -#### Secțiunea V - Setări de regiune +#### Section VI - Region settings 1. Deschideți System Settings 1. Mergeți în "Other Settings", "Profile", apoi "Region Settings" 1. Selectaţi o ţară din regiunea la care ați schimbat 1. Dacă vi se solicită, nu aveţi nevoie să setați un stat -#### Secțiunea VI - Eliminarea imaginii CTRTransfer +#### Section VII - Remove CTRTransfer image 1. Lansați GodMode9 ținând apăsat (Start) în timpul pornirii 1. Navigați spre `[0:] SDCARD` -> `gm9` diff --git a/_pages/ro_RO/restoring-cfw.txt b/_pages/ro_RO/restoring-cfw.txt new file mode 100644 index 0000000000..e0b59e03f0 --- /dev/null +++ b/_pages/ro_RO/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Cuprins" %} + +### Lectură obligatorie + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### Ce aveți nevoie +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instrucțiuni + +#### Secțiunea I - Preparații + +1. Introduceți cardul SD în calculator +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reintroduceți cardul SD în dispozitivul dumneavoastră + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele: + * **"Show NAND or user string in System Settings"** +1. Apăsați (Start) pentru a salva și reporni + +___ + +### Continuați la [Finalizând instalarea](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/ro_RO/seedminer.txt b/_pages/ro_RO/seedminer.txt index ea94a52c65..b7da9cbc26 100644 --- a/_pages/ro_RO/seedminer.txt +++ b/_pages/ro_RO/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Cuprins" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Lectură obligatorie -Pentru a instala boot9strap pe dispozitivul dumneavoastră, vom exploata o neglijare în restricţiile de securitate ale aplicațiilor "DSiWare". +To install boot9strap on your device, we derive your device's unique encryption key. Pentru a realiza acest lucru, vom folosi o unealtă numită Seedminer pentru a calcula cheia de criptare DSiWare (`movable.sed`) pentru dispozitivul dumneavoastră. Apoi vom folosi această cheie de crpitare DSiWare pentru a decripta o aplicație de DSiWare compatibilă și injecta un exploit în el pentru a lansa codul nostru (exploit-ul specific depinde de regiunea dispozitivului). @@ -16,21 +19,7 @@ Această metodă folosește o placă video puternică pentru a realiza calculele ### Instrucțiuni -#### Secțiunea I - Teste de compatibilitate - -Deși aceste teste nu sunt strict necesare pentru a efectua exploit-ul Seedminer, exploit-urile ulterioare au nevoie ca aceste teste să fie puse în funcțiune și ar fi o pierdere de timp să se pornească Seedminer fără posibilitatea de a porni alte exploit-uri. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Secțiunea II - Preparații +#### Secțiunea I - Preparații 1. Introduceți cardul SD în calculator 1. Navigați către folderul `Nintendo 3DS` pe cardul SD @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + Acest nume de folder este de asemenea cunoscut ca "ID0" al dispozitivului 1. Porniți dispozitivul 1. Mergeți în Lista de prieteni ([iconița cu fața portocalie]({{ "/images/friend-list-icon.png" | absolute_url }} în rândul superior de pe meniul HOME) - + Dacă primiți o eroare și sunteți dat afară din meniu, va trebui să creți un nou Mii sau consola nu se mai poate conecta în serverele Nintendo (din cauza unui ban sau problemelor de conexiune) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Găsiți profilul de Mii, apoi găsiţi câmpul "Friend Code" de pe ecranul superior -#### Secțiunea III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + Acest site poate automatiza extragerea de `movable_part1.sed` (folosind un bot care simulează un 3DS) şi descifrarea criptării DSiWare a dispozitivului (folosind calculatorul unui voluntar pentru a rula Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Introduceți Friend Code-ul dispozitivului (cu fără spaţii sau liniuţe) în câmpul "Your friend code" 1. Lipiți numele de folder al dispozitvului de 32 de caractere în câmpul "Your ID0" + Nu încercați să introduceți ID0-ul de mână. Asigurați-vă că ID0-ul este introdus corect prin copierea și lipirea de unde l-ați salvat în secțiunea anterioară 1. Selectați "Go" - + În cazul în care site-ul se duce imediat la pasul 4, descărcați fişierul `movable.sed` și continuați cu următoarea secţiune. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. Când vi se solicită, folosiți butonul "Register Friend" pe dispozitivul dumneavoastră să adăugaţi codul de prieten al bot-ului care simulează un 3DS 1. Așteptați ca site-ul să se actualizeze + Dacă nu se actualizează, așteptați câteva minute înainte de a reîncărca pagina o dată 1. Odată ce site-ul vă procesează informațiile, vi se va da opțiunea "Continue" (Continuați) sau "Do another device" (Faceți alt dispozitiv). Faceți click pe butonul verde care scrie "Continue" 1. Așteptați ca restul procesului să se termine - + Acesta este de obicei destul de rapid (1-5 minute) dar în unele cazuri, poate lua până la o jumătate de oră. - + În timpul acestui proces, bot-ul care l-ați adăugat s-ar putea să nu apară pe 3DS. Cât timp nu se actualizează website-ul, aceasta nu va fi o problemă. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + În cazul în care încă așteptați după o jumătate de oră, alăturați-vă la [Nintendo Homebrew pe Discord](https://discord.gg/MWxPgEp) şi cereți (în engleză) pentru ca cineva de acolo să vă asiste 1. Când procesul s-a completat, descărcați fişierul `movable.sed` de pe site + Păstrați acest fișier de vreme ce veți avea nevoie de el în următoarele pagini ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/ro_RO/site-navigation.txt b/_pages/ro_RO/site-navigation.txt index 86025271f8..a23e249879 100644 --- a/_pages/ro_RO/site-navigation.txt +++ b/_pages/ro_RO/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Populare** + [Finalizând instalarea](finalizing-setup) -+ [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Instalând boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Actualizare cu card de joc](cart-update) + [Contribuții](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donaţii](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Instalând ntrboot (Două 3DS-uri)](flashing-ntrboot-(3ds-multi-system)) + [Instalând ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Instalând ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Începeți](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [Folosind GodMode9](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Acasă](/) + [Homebrew Launcher (Alternative)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher(Steelhax)](homebrew-launcher-(steelhax)) + [Instalând boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Instalând boot9strap (Browser)](installing-boot9strap-(browser)) + [Instalând boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Instalând boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Instalând boot9strap (MSET)](installing-boot9strap-(mset)) + [Instalând boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Instalând boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Instalând boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Mutare EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Schimb de regiune](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Depanare](troubleshooting) + [Dezinstalând CFW](uninstall-cfw) + [Actualizând B9S](updating-b9s) diff --git a/_pages/ro_RO/updating-b9s.txt b/_pages/ro_RO/updating-b9s.txt index 6906765a80..248e301cf8 100644 --- a/_pages/ro_RO/updating-b9s.txt +++ b/_pages/ro_RO/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Actualizând B9S" Această pagină este pentru utilizatorii de boot9strap ca să-și actualizeze instalarea către ultima versiune. -{% capture notice-1 %} -Au existat rapoarte despre un val de banuri adresate utilizatorilor de CFW de către Nintendo. Pentru a vă proteja, efectuaţi următorii paşi înainte de a începe acest ghid: - -1. Mergeți în System Settings, apoi "Internet Settings", apoi "SpotPass", apoi "Sending of System Information" -1. Dezactivați opţiunea "Sending of System Information" -1. Ieșiți din System Settings -1. Mergeți în Lista de prieteni ([iconița cu fața portocalie]({{ "/images/friend-list-icon.png" | absolute_url }} în rândul superior de pe meniul HOME) - + Dacă primiți o eroare și sunteți dat afară din meniu, setarea Listei de prieteni este dezactivată sau consola nu se mai poate conecta în serverele Nintendo (din cauza unui ban sau problemelor de conexiune) -1. Mergeți la setările de pe Lista de prieteni, apoi "Friend Notification Settings", apoi "Show friends what you're playing" -1. Dezactivați opțiunea "Show friends what you're playing" -1. Ieșiți din Lista de prieteni - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### Ce aveți nevoie * Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Cea mai nouă versiune de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard; nu fișierul `devkit`, nici cel `ntr`)* -* Cea mai recentă versiune de [Luma3DS] (https://github.com/AuroraWright/Luma3DS/releases/latest) -* Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instrucțiuni @@ -39,7 +25,6 @@ Pentru toți pașii din această secțiune, suprascrieți fișierele existente d {: .notice--info} 1. Introduceți cardul SD în calculator -1. Copiați `boot.3dsx` în rădăcina cardului SD 1. Creați un folder numit `boot9strap` pe rădăcina cardului SD 1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD 1. Copiați `SafeBS9Installer.firm` din arhiva `.zip` SafeB9SInstaller în folderul `/luma/payloads/` de pe cardul SD @@ -58,7 +43,7 @@ Pentru toți pașii din această secțiune, suprascrieți fișierele existente d 1. Închideți dispozitivul 1. Introduceți cardul SD în calculator -1. Copiați `boot.firm` din Luma3DS `.zip` pe rădăcina cardului SD, înlocuind fișierul existent +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reintroduceți cardul SD în dispozitivul dumneavoastră 1. Porniți dispozitivul diff --git a/_pages/ru_RU/a9lh-to-b9s.txt b/_pages/ru_RU/a9lh-to-b9s.txt index 8ec3a9189e..c2829e700f 100644 --- a/_pages/ru_RU/a9lh-to-b9s.txt +++ b/_pages/ru_RU/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ title: "С A9LH до B9S" Чтобы распаковать архивы `.7z`, присутствующие на этой странице, вам понадобится архиватор [7-Zip](http://www.7-zip.org/) или [The Unarchiver](https://theunarchiver.com/). -Если в Luma3DS вы используете PIN-код, то при работе SafeB9SInstaller вы получите ошибку "OTP Crypto Fail". Для решения этой проблемы временно откажитесь от использования PIN-кода (вы сможете включить его обратно после обновления). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -Сообщается о волне банов, выданных Nintendo пользователям CFW. Чтобы защитить себя, выполните следующие шаги перед началом этого руководства: - -1. Откройте Системные настройки, затем "Интернет-настройки", затем "SpotPass", затем "Отправка информации о системе" -1. Отключите опцию "Отправка информации о системе" -1. Закройте Системные настройки (System settings) -1. Откройте Список друзей ([оранжевый значок в виде лица]({{ "/images/friend-list-icon.png" | absolute_url }}) на верхней строчке меню HOME) - + Если появляется ошибка и вас не пускают в меню, значит либо нужная настройка в Списке друзей уже отключена, либо консоль не может подключиться к серверам Nintendo (по причине бана или проблем с соединением) -1. Перейдите в настройки Списка друзей, затем "Настройки сообщений друга", затем "Показать друзьям, во что вы играете" -1. Отключите опцию "Показать друзьям, во что вы играете" -1. Закройте Список друзей - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### Что понадобится Обратите внимание, что требуемый ниже файл с именем `secret_sector.bin` это тот же, что присутствовал в различных версиях архива `data_input.zip`. Если у вас уже есть этот файл где-то на диске, вы можете использовать его, вместо загрузки файла ниже. @@ -42,11 +26,10 @@ title: "С A9LH до B9S" {: .notice--info} * - **Только для пользователей New 3DS:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Версия v7.0.5 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(`.7z-архив`)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* -* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Инструкция @@ -57,8 +40,7 @@ title: "С A9LH до B9S" 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Скопируйте `boot.3dsx` в корень SD-карты -1. Скопируйте файл `boot.firm` из `.zip-архива` со свежей версией Luma3DS в корень SD-карты +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Скопируйте файл `arm9loaderhax.bin` из `.7z-архива` Luma3DS версии v7.0.5 в корень SD-карты 1. Удалите все существующие `.bin` приложения в папке `/luma/payloads/` на SD-карте, так как они не будут совместимы с boot9strap совместимыми версиями Luma3DS 1. Скопируйте `SafeB9SInstaller.bin` из `.zip-архива` SafeB9SInstaller в папку `/luma/payloads/` на SD-карте diff --git a/_pages/ru_RU/bannerbomb3.txt b/_pages/ru_RU/bannerbomb3.txt index 4ed46ad4c9..69f1757fa6 100644 --- a/_pages/ru_RU/bannerbomb3.txt +++ b/_pages/ru_RU/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Содержание" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Обязательно к прочтению Чтобы получить дамп системного DSiWare приложения, мы воспользуемся уязвимостью в разделе Управление данными DSiWare внутри приложения Настройки. @@ -17,7 +20,7 @@ title: "BannerBomb3" * Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) #### Часть I - BannerBomb3 -1. Перейдите по ссылке [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) на компьютере +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Загрузите свой movable.sed, используя опцию "Выберите файл" 1. Выберите "Go" + Начнется загрузка эксплойта DSiWare `F00D43D5.bin` внутри zip-архива (`tadmuffin_out.zip`) diff --git a/_pages/ru_RU/checking-for-cfw.txt b/_pages/ru_RU/checking-for-cfw.txt new file mode 100644 index 0000000000..532d313165 --- /dev/null +++ b/_pages/ru_RU/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Инструкция + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/ru_RU/credits.txt b/_pages/ru_RU/credits.txt index 2c530d8c8a..1e8992030a 100644 --- a/_pages/ru_RU/credits.txt +++ b/_pages/ru_RU/credits.txt @@ -2,6 +2,9 @@ title: "Благодарности" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Отдельное спасибо всем из [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) (англ.) за то, что они потрясающие!** {: .notice--primary} @@ -22,7 +25,7 @@ title: "Благодарности" + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ title: "Благодарности" + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ title: "Благодарности" + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/ru_RU/dsidumper.txt b/_pages/ru_RU/dsidumper.txt index 20b1e03f64..9762798a6c 100644 --- a/_pages/ru_RU/dsidumper.txt +++ b/_pages/ru_RU/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Содержание" %} - -### Обязательно к прочтению - -Чтобы получить дамп системного DSiWare приложения, мы воспользуемся уже существующим эксплойтом homebrew launcher. - -Если в этом руководстве вы столкнетесь с поврежденным приложением DS Internet Settings, выполните инструкции на странице [TWLFix для Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) перед тем, как продолжить - -### Что понадобится - -* Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) -* Свежая версия [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Часть I - Подготовительные работы - -1. Выключите консоль -1. Вставьте SD-карту в компьютер -1. Скопируйте файл `movable.sed` в корень SD-карты -1. Скопируйте `DSiWare_Dump.3dsx` в папку `/3ds/` на SD-карте -1. Вставьте SD-карту обратно в консоль -1. Включите консоль - -#### Часть II - Создание дампа DSiWare - -1. Запустите Homebrew Launcher, используя любой метод -1. Выберите DSiWare Dumper в списке homebrew - + Это действие создаст дамп DSiWare приложения в корне SD-карты - + Может появиться несколько сообщений об ошибках, это нормально. -1. Когда появится надпись "Success", это будет ваш файл бэкапа DSiWare, который вы будете использовать позже в руководстве - -Следующий шаг: [Установка boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ru_RU/faq.txt b/_pages/ru_RU/faq.txt index 2f74dcd55a..11efa15e7d 100644 --- a/_pages/ru_RU/faq.txt +++ b/_pages/ru_RU/faq.txt @@ -6,7 +6,7 @@ title: "Вопросы и ответы" **О:** Да **В:** *Как можно обновить Luma3DS?* -**О:** Используйте [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **В:** *Я слышал, что в продаже есть различные устройства (Gateway, Sky3DS, и т. д.), нужны ли они мне?* **О:** Нет. boot9strap - это лучший метод взлома, который запускается на ранних стадиях загрузки консоли. diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt index 2590fc8a41..ff035910d7 100644 --- a/_pages/ru_RU/finalizing-setup.txt +++ b/_pages/ru_RU/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Завершение установки" Файл `boot.firm` - это то, что boot9strap запускает после загрузки из NAND, и этот файл может быть любым arm9-приложением. Этот файл может быть заменён когда угодно, однако Luma3DS позволяет запускать другие arm9 приложения в FIRM формате, используя свой загрузчик. -Мы используем Luma3DS от [AuroraWright](https://github.com/AuroraWright/), чтобы запускать пропатченный SysNAND напрямую, поэтому необходимость в каком-либо виде EmuNAND полностью пропадает, что значительно упрощает использование взломанной 3DS и экономит место на SD-карте. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. В процессе мы установим и настроим следующие программы: + **FBI** *(установщик приложений и игр в формате CIA)* + **Anemone3DS** *(установка пользовательских тем)* + **Checkpoint** *(создание и восстановление резервных копий сохранений 3DS и DS игр)* -+ **Luma3DS Updater** *(Удобное обновление CFW)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(многофункциональная утилита для работы с NAND и картриджами)* + **Homebrew Launcher Loader** *(запуск Homebrew Launcher)* + **DSP1** *(позволяет хоумбрю приложениям воспроизводить звук)* @@ -25,12 +25,12 @@ title: "Завершение установки" * Свежая версия [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(`.cia-файл`)* * Свежая версия [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(`.cia-файл`)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * Свежая версия [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* Свежая версия [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * Свежая версия [FBI](https://github.com/Steveice10/FBI/releases/latest) *(`.cia-файл` и `.3dsx-файл`)* * Свежая версия [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* Свежая версия [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(`.cia-файл`)* ### Инструкция @@ -39,15 +39,16 @@ title: "Завершение установки" 1. Выключите консоль 1. Вставьте SD-карту в компьютер 1. Создайте папку `3ds` в корне SD-карты, если таковой нет + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Создайте папку `cias` в корне SD-карты, если таковой нет 1. Скопируйте `ctr-no-timeoffset.3dsx` в папку `/3ds/` на SD-карте 1. Скопируйте `FBI.3dsx` в папку `/3ds/` на SD-карте 1. Скопируйте `Homebrew_Launcher.cia` в папку `/cias/` на SD-карте -1. Скопируйте `lumaupdater.cia` в папку `/cias/` на SD-карте 1. Скопируйте `FBI.cia` в папку `/cias/` на SD-карте 1. Скопируйте `DSP1.cia` в папку `/cias/` на SD-карте 1. Скопируйте `Anemone3DS.cia` в папку `/cias/` на SD-карте 1. Скопируйте `Checkpoint.cia` в папку `/cias/` на SD-карте +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Создайте папку `payloads` внутри папки `luma` на SD-карте, если таковой нет 1. Скопируйте `GodMode9.firm` из `.zip-архива` GodMode9 в папку `/luma/payloads/` на SD-карте 1. Скопируйте папку `gm9` из `.zip-архива` GodMode9 в корень SD-карты @@ -102,7 +103,7 @@ title: "Завершение установки" #### Часть VI - CTRNAND Luma3DS 1. Выключите консоль -1. Запустите GodMode9, держа нажатой кнопку (Start) во время загрузки +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. Если вам предложат создать бэкап важных файлов, нажмите кнопку (A) чтобы сделать это, затем нажмите (A) чтобы продолжить после завершения 1. Если вам предложат выставить RTC дату и время, нажмите кнопку (A) чтобы сделать это, настройте дату и время, затем нажмите (A) чтобы продолжить 1. Нажмите кнопку (Home) для вызова меню @@ -150,18 +151,8 @@ ___ #### Информация и замечания -{% capture notice-10 %} -Теперь вы можете использовать Luma3DS Updater для обновления кастомной прошивки. Запустите его и нажмите (А). - -Это не тоже самое что Обновление системы (System Update). Это приложение обновляет только файлы Luma3DS. - -Это действие обновит файлы Luma3DS на SD-карте и в CTRNAND, откуда консоль загружается при отсутствии SD-карты. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -Теперь по умолчанию будет запускаться Luma3DS CFW SysNAND. +You will now boot Luma3DS CFW by default. Для запуска конфигуратора Luma3DS включите консоль с зажатой кнопкой (Select). @@ -177,7 +168,7 @@ ___ {% capture notice-6 %} Если вы захотите заменить SD-карту на карту большего размера, вам нужно просто отформатировать новую карту в FAT32 и скопировать все содержимое старой SD-карты на новую. -Если ваша новая SD-карта больше 32ГБ, то вам необходимо использовать другую утилиту для форматирования, например [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) для Windows, [gparted](http://gparted.org/download.php) для Linux, или [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) для Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ ___ Для справки об использовании различных функций Luma3DS обратитесь к её [вики](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) (англ.). {: .notice--success} -Для получения информации по установке пользовательских тем и экранов-заставок, посетите [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} Для получения информации об использовании чит-кодов Gateshark на Luma3DS, посетите [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt index 9b058cfa3e..2fee799f6f 100644 --- a/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ title: "Прошивка ntrboot (Две консоли 3DS)" * Две консоли семейства 3DS + **Исходная 3DS**: консоль семейства 3DS, на которую уже установлен boot9strap + **Целевая 3DS**: консоль с официальной прошивкой -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; не `devkit-файл`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * Свежая версия [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Инструкция diff --git a/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt b/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt index 468d56a295..05be677d68 100644 --- a/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ title: "Прошивка ntrboot (Одна консоль 3DS)" ### Что понадобится * Флешкартридж, совместимый с ntrboot -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; не `devkit-файл`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * Свежая версия [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Инструкция diff --git a/_pages/ru_RU/flashing-ntrboot-(nds).txt b/_pages/ru_RU/flashing-ntrboot-(nds).txt index 2c3905bff3..f0dcf84e51 100644 --- a/_pages/ru_RU/flashing-ntrboot-(nds).txt +++ b/_pages/ru_RU/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ title: "Прошивка ntrboot (NDS)" * Две консоли + **Исходная NDS / NDSL**: Nintendo DS или Nintendo DS Lite, совместимая с вашим флешкартриджем + **Целевая 3DS**: консоль семейства 3DS с официальной прошивкой -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; не `devkit-файл`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * Свежая версия [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Инструкция diff --git a/_pages/ru_RU/formatting-sd-(linux).txt b/_pages/ru_RU/formatting-sd-(linux).txt new file mode 100644 index 0000000000..faf711dbbd --- /dev/null +++ b/_pages/ru_RU/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Этот раздел предназначен только для пользователей Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Инструкция +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/ru_RU/formatting-sd-(mac).txt b/_pages/ru_RU/formatting-sd-(mac).txt new file mode 100644 index 0000000000..8cfe79c32a --- /dev/null +++ b/_pages/ru_RU/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Этот раздел предназначен для пользователей Mac. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Инструкция + +#### OS X El Capitan (10.11) and later + +1. Вставьте SD-карту в компьютер +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Вставьте SD-карту в компьютер +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/ru_RU/formatting-sd-(windows).txt b/_pages/ru_RU/formatting-sd-(windows).txt new file mode 100644 index 0000000000..6ccbf8200f --- /dev/null +++ b/_pages/ru_RU/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Этот раздел предназначен для пользователей Windows. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Что понадобится + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Инструкция + +1. Вставьте SD-карту в компьютер +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/ru_RU/get-started-(new-3ds).txt b/_pages/ru_RU/get-started-(new-3ds).txt index 8f6606ddbc..a2fd6c8d8b 100644 --- a/_pages/ru_RU/get-started-(new-3ds).txt +++ b/_pages/ru_RU/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Начало (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="Содержание" %} ### Обязательно к прочтению -Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0. - -Кроме того, последнее число вашей версии прошивки (после тире) относится к версии браузера. В настоящее время версия браузера не имеет значения для New 3DS в данном руководстве. - -**Если вы не можете следовать инструкциям для конкретной версии из-за невыполненных предварительных условий, обратите внимание на строку "Все версии". Эти методы работают вне зависимости от версии прошивки.** - -Любую версию прошивки можно обновить на более высокую из этой же колонки [с помощью картриджа](cart-update) (или выполнив Обновление системы), и после этого продолжить выполнять инструкцию. +Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Версия программного обеспечения отображается в правом нижнем углу верхнего экрана в приложении Системные настройки (System settings). ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Таблица версий - + - - - + + + - - - - - - - - - - - + - + - + - - + + - - - + + - +
СПоСПоAction
2.1.02.1.0Установка boot9strap (2xrsa)
8.1.08.1.0Установка boot9strap (Soundhax)
9.0.01.0.0 11.3.0Homebrew Launcher (Soundhax)Installing boot9strap (Soundhax)
11.4.011.7.0Используйте метод "Все версии"11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Установка boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ВСЕ ВЕРСИИ

ntrboot
(Требуется совместимый флешкартридж)

или

Установка boot9strap (Hardmod)
(Требуется пайка)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/ru_RU/get-started-(old-3ds).txt b/_pages/ru_RU/get-started-(old-3ds).txt index c47b7e0b89..3e51b2be54 100644 --- a/_pages/ru_RU/get-started-(old-3ds).txt +++ b/_pages/ru_RU/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "Начало (Old 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="Содержание" %} ### Обязательно к прочтению -Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0. - -Кроме того, два последних столбца относятся к последнему числу версии прошивки вашего устройства (которая обозначает версию установленного в системе браузера). Если версия оканчивается на -0, значит, у вас отсутствует браузер, любое другое число больше 0 говорит о том, что браузер установлен. - -Например, если у вас версия прошивки "5.0.0-0E", необходимо выбрать ячейку на пересечении колонки "Без браузера" и ряда "С 5.0.0 по 5.1.0" так как версия системы находится в этом диапазоне и в системе не установлен браузер. - -**Если вы не можете следовать инструкциям для конкретной версии из-за невыполненных предварительных условий, обратите внимание на строку "Все версии". Эти методы работают вне зависимости от версии прошивки.** - -Любую версию прошивки можно обновить на более высокую из этой же колонки [с помощью картриджа](cart-update) (или выполнив Обновление системы), и после этого продолжить выполнять инструкцию. +Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Версия программного обеспечения отображается в правом нижнем углу верхнего экрана в приложении Системные настройки (System settings). ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Таблица версий @@ -33,49 +28,23 @@ title: "Начало (Old 3DS)" - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
С ПоБез браузераС браузеромAction
1.0.02.0.0Используйте метод "Все версии"
2.1.02.1.0Используйте метод "Все версии"Установка boot9strap (2xrsa)
2.2.02.2.0Используйте метод "Все версии"
3.0.08.1.0Установка boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Используйте метод "Все версии"Installing boot9strap (Soundhax)
11.8.011.8.0Установка boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ВСЕ ВЕРСИИ

ntrboot
(Требуется совместимый флешкартридж)

или

Установка boot9strap (Hardmod)
(Требуется пайка)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/ru_RU/get-started.txt b/_pages/ru_RU/get-started.txt index 8c0b9ea10a..bd02870c96 100644 --- a/_pages/ru_RU/get-started.txt +++ b/_pages/ru_RU/get-started.txt @@ -6,85 +6,16 @@ title: "Начало" ### Обязательно к прочтению -Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0. - -Версия программного обеспечения отображается в правом нижнем углу верхнего экрана в приложении Системные настройки (System settings). - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**Если вы не можете следовать инструкциям для конкретной версии из-за невыполненных предварительных условий, обновитесь до последней версии либо обратите внимание на строку "Все версии". Эти методы работают вне зависимости от версии прошивки.** - -Любую версию прошивки можно обновить на более высокую из этой же колонки [с помощью картриджа](cart-update) (или выполнив Обновление системы), и после этого продолжить выполнять инструкцию. - -Если вы уже взламывали вашу 3DS ранее и использовали кастомную прошивку на основе EmuNAND, следуйте инструкциям, находясь на SysNAND. Заменяйте любые существующие файлы. В конце все ваши данные будут перенесены из EmuNAND в SysNAND с B9S. Если вы используете menuhax, вы должны [очистить данные меню HOME](troubleshooting#очистка-данных-меню-home), чтобы удалить menuhax перед тем, как начать. - -Эта страница содержит инструкции по установке boot9strap на *не взломанную* 3DS или 2DS. Если у вас уже установлен arm9loaderhax, и вы хотите обновиться до boot9strap, следуйте инструкциям в разделе [с A9LH до B9S](a9lh-to-b9s). -{: .notice--primary} - -Перед началом, пользователям Windows необходимо включить отображение расширений файлов следуя [Расширения файлов (Windows)](file-extensions-(windows))! -{: .notice--info} - -Прежде чем начать, рекомендуется проверить свою SD-карту на ошибки с помощью [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), или [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Таблица версий - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
СПоAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ВСЕ ВЕРСИИ

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/ru_RU/godmode9-usage.txt b/_pages/ru_RU/godmode9-usage.txt index 38ccb86d2f..9bad49cc21 100644 --- a/_pages/ru_RU/godmode9-usage.txt +++ b/_pages/ru_RU/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "Использование GodMode9" {% include toc title="Содержание" %} -Для поддержки (на английском языке) по теме GodMode9, а также для помощи в написании скриптов или для получения обновлений, обратитесь на сервер [GodMode9 в Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Обязательно к прочтению diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt index c1bf114e9c..649f70fabc 100644 --- a/_pages/ru_RU/home.txt +++ b/_pages/ru_RU/home.txt @@ -63,7 +63,7 @@ Boot9strap имеет множество преимуществ перед др ## Что позволяет кастомная прошивка? + Играть в любые игры, доступные на картриджах или в eShop, вне зависимости от региона -+ Изменять внешний вид меню HOME при помощи пользовательских [тем и экранов-заставок](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Использовать "ROM hacks" для имеющихся игр + Делать скриншоты игр и приложений + Делать резервные копии, редактировать и восстанавливать сохранения игр @@ -78,11 +78,11 @@ Boot9strap имеет множество преимуществ перед др + **Перед тем, как начинать прошивку, следует понимать риск взлома 3DS: КАЖДЫЙ раз, модифицируя прошивку консоли, вы рискуете получить НЕВОССТАНОВИМЫЙ брик. Вероятность этого крайне низкая, но шанс всё равно есть. Так что убедитесь что вы СТРОГО следуете всем указаниям.** + Если ранее вы уже взламывали свою 3DS для получения EmuNAND и хотите перенести его содержимое в SysNAND с кастомной прошивкой, просто следуйте руководству пока не дойдете до пункта о восстановлении EmuNAND в разделе [Завершение установки](finalizing-setup). -+ Руководство предназначено для New 3DS, Old 3DS, New 2DS и Old 2DS любых регионов на прошивке 11.13.0 или ниже. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Если всё пройдет по плану, вы ничего не потеряете и всё останется в первоначальном состоянии (игры, сохранения, NNID). + Держите консоль подключенной к зарядному устройству на протяжении всего процесса, чтобы избежать потери данных или поломки в случае внезапного отключения консоли! + SD-карта должна использовать [MBR, а не GPT](http://www.howtogeek.com/245610/) (англ.) (SD-карта, входящая в комплект, уже использует MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ Если вам нужно отформатировать новую SD-карту, воспользуйтесь [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) и установите Allocation Unit Size на 32КБ (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + Old 2DS программно в основном идентична Old 3DS, в то время как New 2DS программно в основном идентична New 3DS. Все шаги, предназначенные для "Old 3DS", также применимы к Old 2DS, а все шаги, предназначенные для "New 3DS", также применимы к New 2DS. ___ diff --git a/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt b/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt index 40eabe763f..487f25a45c 100644 --- a/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Содержание" %} - -### Обязательно к прочтению - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### Что понадобится - -* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Инструкция - -#### Часть I - Подготовительные работы - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Дождитесь окончания процесса - + If it displays a yellow screen, power your console off, then try this section again -1. Если эксплойт сработал корректно, запустится Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ru_RU/homebrew-launcher-(pichaxx).txt b/_pages/ru_RU/homebrew-launcher-(pichaxx).txt index e26b0ecd4b..80b00f3c5d 100644 --- a/_pages/ru_RU/homebrew-launcher-(pichaxx).txt +++ b/_pages/ru_RU/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Содержание" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Обязательно к прочтению Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для получения доступа к Homebrew Launcher при помощи эксплойта PicHaxx в целях инъекции уязвимого тайтла DSiWare в приложение DS Download Play. Этот метод требует, чтобы у вас уже была в наличии (или загружена) бесплатная игра "Pokemon Picross" из eShop. -Если ваша консоль уже имеет доступ к Homebrew Launcher (при помощи pichaxx или другого эксплойта), вы можете перейти к странице [DSiWare Dumper](dsidumper). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} Если у вас уже есть Pokemon Picross, то этот процесс перезапишет сохранение вашей игры! @@ -19,7 +22,8 @@ title: "Homebrew Launcher (PicHaxx)" * Бесплатная игра "Pokemon Picross" из eShop * Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) * Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* [Otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(для вашего региона и версии прошивки)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Инструкция @@ -27,26 +31,26 @@ title: "Homebrew Launcher (PicHaxx)" 1. Скопируйте `boot.3dsx` в корень SD-карты 1. Скопируйте otherapp payload в корень вашей SD-карты и переименуйте его в `otherapp.bin` - + Если вы не видите расширение `.bin`, не добавляйте его в конец имени файла + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Создайте папку `3ds` в корне SD-карты, если таковой нет #### Часть II - PicHaxx -1. Перейдите по ссылке [PicHaxx Injector](https://seedminer.hacks.guide/pichaxx/) на компьютере +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Выберите свой файл `movable.sed` 1. Выберите "Build and Download" 1. Дождитесь окончания процесса -1. Перейдите в папку `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` на SD-карте - + `` будет таким же, как и на странице [Seedminer](seedminer) - + `` будет другой папкой с именем из 32 символов внутри папки `` -1. Скопируйте свой новый скачанный файл `00000001.sav` в папку `data` на SD-карте +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Перезапишите старый файл сохранения при появлении запроса 1. Вставьте SD-карту обратно в консоль 1. Включите консоль 1. Запустите "Pokemon Picross" 1. Если эксплойт сработал корректно, запустится Homebrew Launcher - + Может появиться ошибка "no applications found". -1. Выключите консоль. + + You may see an error stating there are no applications found +1. Выключите консоль ___ diff --git a/_pages/ru_RU/homebrew-launcher-(soundhax).txt b/_pages/ru_RU/homebrew-launcher-(soundhax).txt index fac76ebbf2..fc47278407 100644 --- a/_pages/ru_RU/homebrew-launcher-(soundhax).txt +++ b/_pages/ru_RU/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Soundhax (в сочетании с Homebrew Launcher) совместим с ве Заметьте, что обновление на картридже позволяет обновить только базовые функции консоли, такие как Системные настройки, меню HOME, и т. п. приложение Звук Nintendo 3DS и сетевые функции, такие как Передача данных, Интернет-браузер, Площадь StreetPass Mii или eShop с картриджа не обновляются. -Это означает, что обновление картриджем с версии, содержащей старое приложение Звук Nintendo 3DS *(<3.0.0)*, до версии с новым приложением Звук Nintendo 3DS сделает невозможной работу Soundhax! Вам понадобится [альтернативный метод](homebrew-launcher-(alternatives)) запуска Homebrew Launcher! +Это означает, что обновление картриджем с версии, содержащей старое приложение Звук Nintendo 3DS *(<2.1.0)*, до версии с новым приложением Звук Nintendo 3DS сделает невозможной работу Soundhax! Вам понадобится [альтернативный метод](homebrew-launcher-(alternatives)) запуска Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ Soundhax (в сочетании с Homebrew Launcher) совместим с ве ### Что понадобится * Свежая версия [Soundhax](http://soundhax.com) *(для вашего региона, консоли и версии прошивки)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * Свежая версия [safehax](https://github.com/TiniVi/safehax/releases/latest) *(`.3dsx-файл`)* * Свежая версия [udsploit](https://github.com/smealum/udsploit/releases/latest) -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* [Otherapp payload](https://smealum.github.io/3ds/#otherapp) *(для вашего региона и версии прошивки)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Инструкция diff --git a/_pages/ru_RU/homebrew-launcher-(steelhax).txt b/_pages/ru_RU/homebrew-launcher-(steelhax).txt index fb5b10dce4..65ec1b9a69 100644 --- a/_pages/ru_RU/homebrew-launcher-(steelhax).txt +++ b/_pages/ru_RU/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Содержание" %} - -### Обязательно к прочтению - -Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для получения доступа к Homebrew Launcher при помощи эксплойта Steelhax в целях инъекции уязвимого тайтла DSiWare в приложение DS Download Play. Этот метод требует, чтобы у вас уже была в наличии (или загружена) бесплатная игра "Steel Diver: Sub Wars" из eShop. - -Если ваша консоль уже имеет доступ к Homebrew Launcher (при помощи Steelhax или другого эксплойта), вы можете перейти к странице [DSiWare Dumper](dsidumper). -{: .notice--success} - -Если у вас уже есть Steel Diver: Sub Wars, то этот процесс перезапишет сохранение вашей игры! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### Что понадобится - -* Бесплатная игра "Steel Diver: Sub Wars" из eShop -* Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) -* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* Свежая версия [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* [Otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(для вашего региона и версии прошивки)* - -### Инструкция - -#### Часть I - Подготовительные работы - -1. Создайте папку `3ds` в корне SD-карты, если таковой нет -1. Скопируйте `boot.3dsx` в корень SD-карты -1. Скопируйте папку `steelhax` из архива `Steelhax-release.zip` в корень SD-карты -1. Скопируйте otherapp payload в папку `steelhax` на SD-карте и переименуйте его в `payload.bin` - -#### Часть II - Steelminer - -1. Вставьте SD-карту в консоль -1. Запустите "Steel Diver: Sub Wars" один раз и выберите Mii, чтобы инициализировать сохранение - + Откажитесь от обновления игры при появлении запроса - + Если вы уже обновили игру, используйте меню Управление данными в Системных настройках, чтобы удалить обновление -1. Выйдите из "Steel Diver: Sub Wars" -1. Выключите консоль -1. Вставьте SD-карту в компьютер -1. Перейдите по ссылке [Steelminer Injector](https://seedminer.hacks.guide/steelhax/) на компьютере -1. Выберите свой файл `movable.sed` -1. Выберите "Start!" -1. Дождитесь окончания процесса -1. Перейдите в папку `Nintendo 3DS` -> `` -> `<32-значный-id>` -> `title` -> `00040000` -> `<8-значный-регион>` -> `data` на SD-карте - + **EUR регион**: `000d7e00` - + **JPN регион**: `000d7c00` - + **USA регион**: `000d7d00` -1. Скопируйте свой новый скачанный файл сохранения в папку `data` на SD-карте - + Перезапишите старый файл сохранения при появлении запроса -1. Вставьте SD-карту обратно в консоль -1. Включите консоль -1. Запустите "Steel Diver: Sub Wars" -1. Если эксплойт сработал корректно, запустится Homebrew Launcher - + Может появиться ошибка "no applications found". -1. Выключите консоль. - -___ - -### Следующий шаг: [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/ru_RU/installing-boot9strap-(browser).txt b/_pages/ru_RU/installing-boot9strap-(browser).txt index 0f4e4c3491..4b87160498 100644 --- a/_pages/ru_RU/installing-boot9strap-(browser).txt +++ b/_pages/ru_RU/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Установка boot9strap (Браузер)" {% include toc title="Содержание" %} +### Обязательно к прочтению + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### Что понадобится +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Инструкция @@ -16,24 +24,21 @@ title: "Установка boot9strap (Браузер)" 1. Выключите консоль 1. Вставьте SD-карту в компьютер +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты 1. Создайте папку `boot9strap` в корне SD-карты -1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты -1. Скопируйте `SafeB9SInstaller.dat` и `Launcher.dat` из `.zip-ахрива` SafeB9SInstaller в корень SD-карты - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Вставьте SD-карту обратно в консоль 1. Включите консоль #### Часть II - Запуск SafeB9SInstaller -1. Запустите браузер на консоли и перейдите по одной из следующих ссылок - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + В случае, если первая ссылка не сработала, попробуйте все остальные (некоторое консоли не могут использовать первую ссылку, в то время как другие не могут использовать последние две) +1. Включите консоль +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + При возникновении ошибки, обратитесь к разделу [Проблемы и их решения](troubleshooting#не-работает-эксплойт-на-основе-браузера) 1. Если эксплойт сработал, запустится SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Установка boot9strap (Браузер)" 1. Нажимая (A) выберите следующие пункты: + **"Show NAND or user string in System Settings"** 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться - + Если появляется ошибка, просто переходите к следующей странице ___ diff --git a/_pages/ru_RU/installing-boot9strap-(fredtool).txt b/_pages/ru_RU/installing-boot9strap-(fredtool).txt index d40c301d37..06207e5ba5 100644 --- a/_pages/ru_RU/installing-boot9strap-(fredtool).txt +++ b/_pages/ru_RU/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Установка Boot9strap (Fredtool)" {% include toc title="Содержание" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Обязательно к прочтению Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для расшифровки любого тайтла DSiWare в целях инъекции уязвимого тайтла DSiWare в приложение DS Internet Settings. Этот метод требует наличия бэкапа DSiWare, полученного с помощью BannerBomb или DSiWare Dumper. @@ -12,11 +15,11 @@ title: "Установка Boot9strap (Fredtool)" ### Что понадобится -* Бэкап DSiWare (находящийся в корне SD-карты и полученный с помощью [BannerBomb3](bannerbomb3) или [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) * Свежая версия [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * Свежая версия [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Часть I - Подготовительные работы @@ -28,18 +31,18 @@ title: "Установка Boot9strap (Fredtool)" #### Часть II - Fredtool -1. Перейдите по ссылке [Fredtool](https://fredtool.bruteforcemovable.com/) на компьютере +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Выберите свой файл `movable.sed` в поле "Your movable.sed" 1. Выберите свой бэкап DSiWare (`<8-значный-id>.bin`) в поле "Your dsiware.bin" 1. Заполните captcha "Я не робот" 1. Нажмите "Start" 1. Дождитесь окончания процесса 1. После окончания процесса скачайте с сайта свой модифицированный архив DSiWare - + Этот архив содержит 2 бэкапа dsiware, clean (не модифицированный) и hax (содержащий эксплойт) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Перейдите в папку `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` на SD-карте - + `` будет таким же, как и на странице [Seedminer](seedminer) - + `` будет другой папкой с именем из 32 символов внутри папки `` - + Если папка `Nintendo DSiWare` не существует, создайте ее внутри папки `` + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Скопируйте файл `42383841.bin` из папки `output/hax/` внутри скачанного архива DSiWare (`fredtool_output.zip`) в папку `Nintendo DSiWare` 1. Вставьте SD-карту обратно в консоль 1. Включите консоль @@ -87,7 +90,7 @@ title: "Установка Boot9strap (Fredtool)" 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Скопируйте файл `42383841.bin` из папки `output/clean/` внутри скачанного архива DSiWare (`fredtool_output.zip`) в папку `Nintendo 3DS//<32-значный-id>/Nintendo DSiWare/` на SD-карте +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Замените существующий файл `42383841.bin` 1. Вставьте SD-карту обратно в консоль 1. Включите консоль diff --git a/_pages/ru_RU/installing-boot9strap-(frogtool).txt b/_pages/ru_RU/installing-boot9strap-(frogtool).txt index 564377fe7d..3e996bd4cc 100644 --- a/_pages/ru_RU/installing-boot9strap-(frogtool).txt +++ b/_pages/ru_RU/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Установка Boot9strap (Frogtool)" {% include toc title="Содержание" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Обязательно к прочтению Мы используем доступ к Homebrew Launcher для запуска утилиты Frogtool в целях инъекции японской версии тайтла "Flipnote Studio", которую мы используем для запуска b9sTool и установки boot9strap. @@ -18,14 +21,14 @@ title: "Установка Boot9strap (Frogtool)" * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * Свежая версия [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * Свежая версия [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Часть I - Подготовительные работы 1. Вставьте SD-карту в компьютер 1. Скопируйте файл `movable.sed` в корень SD-карты 1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты -1. Скопируйте файл `boot.nds` (B9STool) из `.zip-архива` b9sTool в корень SD-карты +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Скопируйте `Frogtool.3dsx` в папку `/3ds/` на SD-карте 1. Скопируйте `frogcert.bin` в корень SD-карты 1. Вставьте SD-карту обратно в консоль @@ -74,6 +77,26 @@ title: "Установка Boot9strap (Frogtool)" 1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + После короткой задержки консоль должна загрузить меню HOME. Если экран остаётся чёрным дольше 5 минут, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap) +#### Section V - Restoring DS Download Play + +1. Запустите приложение Загружаемая игра (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Дождитесь появления двух кнопок + + Do not press either of the buttons +1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina +1. Выберите "Miscellaneous options" +1. Выберите "Switch the hb. title to the current app." +1. Нажмите (B), чтобы продолжить +1. Нажмите (B) для возврата в главное меню Rosalina +1. Нажмите (B) для выхода из главного меню Rosalina +1. Нажмите (Home), затем закройте приложение Загружаемая игра +1. Relaunch the Download Play application +1. Консоль должна загрузиться в Homebrew Launcher +1. Выберите Frogtool в списке homebrew +1. Select the "RESTORE patched DS Download Play" option +1. После завершения этой операции прочитайте текст на экранах и проверьте, был ли процесс успешным + + Если есть какие-либо ошибки или отсутствующие файлы, исправьте проблему и повторите попытку +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Следующий шаг: [Завершение установки](finalizing-setup) diff --git a/_pages/ru_RU/installing-boot9strap-(hardmod).txt b/_pages/ru_RU/installing-boot9strap-(hardmod).txt index 5993436f3a..b740f1180b 100644 --- a/_pages/ru_RU/installing-boot9strap-(hardmod).txt +++ b/_pages/ru_RU/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ title: "Установка boot9strap (Hardmod)" * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* * Свежая версия [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Пользователи Windows могут воспользоваться скомпилированным `.exe-файлом`, тогда как пользователям Mac и Linux нужно иметь в системе установленный [Python 3](https://www.python.org/downloads/) для запуска `.py-файлов` -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * `.firm`, соответствующий вашему устройству и версии ПО: | Версия(и) | Kernel | Old 3DS или Old 2DS | New 3DS или New 2DS | diff --git a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt index 39d800c714..a42d09cecd 100644 --- a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt +++ b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Содержание" %} - -### Обязательно к прочтению - -Для того, чтобы использовать уязвимость в SAFE_MODE прошивке консоли, нам нужно внедрить модифицированный WiFi профиль. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -После того, как профиль Wi-Fi будет внедрен, мы используем SAFE_MODE, функцию восстановления, которая присутствует на всех консолях 3DS, для активации модифицированного WiFi профиля. - -Эти инструкции работают на консолях регионов USA, Europe, Japan и Korea. На регион консоли указывает буква U, E, J или K после версии прошивки. - -Если кнопки (L), (R), (Вверх) или (A) не работают, вам нужно будет использовать [Устаревший метод](legacy-methods). Если вам нужна помощь в этом деле, зайдите на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) вам помочь. -{: .notice--danger} - -### Что понадобится - -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Часть I - Подготовительные работы - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. Когда консоль все еще выключена, удерживайте следующие кнопки: (L) + (R) + (Вверх) + (A), затем нажмите кнопку питания - + Keep holding the buttons until the console boots into Safe Mode -1. Нажмите "OK" чтобы начать обновление - + Обновления не будет. Это часть эксплойта -1. Нажмите "Я принимаю" чтобы принять условия -1. В конечном итоге обновление завершится ошибкой с кодом `003-1099`. Это ожидаемое поведение -1. При запросе "Выполнить Интернет-настройки?", выберите "Выполнить" -1. В следующем меню перейдите в `Связь 1` -> `Изменить настройки` -> `Следующая страница (стрелка вправо)` -> `Настройки прокси` -> `Подробнее` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Как только вы увидите `B9S install SUCCESS` на верхнем экране, нажмите любую кнопку, чтобы перезагрузиться в меню настроек Luma - -#### Часть III - Настройка Luma3DS - -1. Ваша консоль должна автоматически показать меню настроек Luma -1. Нажимая (A) выберите следующие пункты: - + **"Show NAND or user string in System Settings"** -1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться - + После короткой задержки консоль должна загрузить меню HOME. Если экран остаётся чёрным дольше 5 минут, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Запустите приложение Загружаемая игра -1. Дождитесь появления двух кнопок - + Do not press either of the buttons -1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina -1. Выберите "Miscellaneous options" -1. Выберите "Switch the hb. title to the current app." -1. Нажмите (B), чтобы продолжить -1. Нажмите (B) для возврата в главное меню Rosalina -1. Нажмите (B) для выхода из главного меню Rosalina -1. Нажмите (Home), затем закройте приложение Загружаемая игра -1. Relaunch the Download Play application -1. Консоль должна загрузиться в Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Следующий шаг: [Завершение установки](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt index 497e54c892..646c21fc3c 100644 --- a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt +++ b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ title: "Установка boot9strap (ntrboot)" * Магнит для ввода консоли в режим ожидания (если используется консоль складной конструкции) * Флешкартридж с прошитым ntrboot * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Инструкция #### Часть I - Подготовительные работы 1. Выключите консоль -1. Вставьте SD-карту консоли в компьютер +1. Insert your console's SD card into your computer + Это должна быть SD-карта вашей 3DS, *не* SD-карта вашего флешкартриджа -1. Скопируйте `SafeB9SInstaller.firm` в корень SD-карты и переименуйте его в `boot.firm` -1. Скопируйте файл `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты -1. Создайте папку `boot9strap` в корне SD-карты -1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Вставьте SD-карту обратно в консоль +1. Reinsert your SD card into your 3DS 1. Включите консоль #### Часть II - ntrboot diff --git a/_pages/ru_RU/installing-boot9strap-(pichaxx).txt b/_pages/ru_RU/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..1ef5e8897b --- /dev/null +++ b/_pages/ru_RU/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Содержание" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Обязательно к прочтению + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### Что понадобится + +* The game "Pokémon Picross" (free on eShop) +* Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) +* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Инструкция + +#### Часть I - Подготовительные работы + +1. Выключите консоль +1. Вставьте SD-карту в компьютер +1. Copy `otherapp.bin` to the root of your SD card +1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты +1. Создайте папку `boot9strap` в корне SD-карты +1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Часть II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Выберите свой файл `movable.sed` +1. Выберите "Build and Download" +1. Дождитесь окончания процесса +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Перезапишите старый файл сохранения при появлении запроса +1. Вставьте SD-карту обратно в консоль +1. Включите консоль +1. Запустите "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Часть III - Установка boot9strap + +1. Дождитесь окончания всех проверок безопасности +1. При появлении запроса, введите указанную комбинацию кнопок для установки boot9strap +1. После завершения процесса, нажмите (A) для перезагрузки + +#### Часть IV - Настройка Luma3DS + +1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS + + Если экран остаётся чёрным, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap) +1. Нажимая (A) выберите следующие пункты: + + **"Show NAND or user string in System Settings"** +1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + + Если появляется ошибка, просто переходите к следующей странице + +___ + +### Следующий шаг: [Завершение установки](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ru_RU/installing-boot9strap-(safecerthax).txt b/_pages/ru_RU/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..d76371e1a1 --- /dev/null +++ b/_pages/ru_RU/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). Если вам нужна помощь в этом деле, зайдите на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) вам помочь. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### Что понадобится + +* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Инструкция + +#### Часть I - Подготовительные работы +1. Выключите консоль +1. Вставьте SD-карту в компьютер +1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты +1. Создайте папку `boot9strap` в корне SD-карты +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Вставьте SD-карту обратно в консоль +1. Включите консоль + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Выключите консоль + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Нажмите "OK" чтобы начать обновление + + Обновления не будет. Это часть эксплойта +1. Нажмите "Я принимаю" чтобы принять условия + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. Если эксплойт сработал, запустится SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Дождитесь окончания всех проверок безопасности +1. При появлении запроса, введите указанную комбинацию кнопок для установки boot9strap +1. После завершения процесса, нажмите (A) для перезагрузки + +#### Section V - Configuring Luma3DS + +1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS + + Если экран остаётся чёрным, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap) +1. Нажимая (A) выберите следующие пункты: + + **"Show NAND or user string in System Settings"** +1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Выключите консоль + +___ + +### Следующий шаг: [Завершение установки](finalizing-setup) +{: .notice--primary} diff --git a/_pages/ru_RU/installing-boot9strap-(soundhax).txt b/_pages/ru_RU/installing-boot9strap-(soundhax).txt index 3203b77448..d055e9b9da 100644 --- a/_pages/ru_RU/installing-boot9strap-(soundhax).txt +++ b/_pages/ru_RU/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Установка boot9strap (Soundhax)" ### Обязательно к прочтению -Soundhax (в сочетании с pre9otherapp) совместим с версиями прошивки от 2.1.0 до 8.1.0 в регионах EUR, JPN, KOR и USA. - -{% capture notice-1 %} - -Заметьте, что обновление на картридже позволяет обновить только базовые функции консоли, такие как Системные настройки, меню HOME, и т. п. приложение Звук Nintendo 3DS и сетевые функции, такие как Передача данных, Интернет-браузер, Площадь StreetPass Mii или eShop с картриджа не обновляются. - -Это означает, что обновление картриджем с версии, содержащей старое приложение Звук Nintendo 3DS *(<2.1.0)*, до версии с новым приложением Звук Nintendo 3DS сделает невозможной работу Soundhax! Вам понадобится альтернативный метод запуска Homebrew Launcher, такой как [Установка boot9strap (Браузер)](installing-boot9strap-(browser)) или [Установка boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### Что понадобится * Свежая версия [Soundhax](http://soundhax.com) *(для вашего региона, консоли и версии прошивки)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* Свежая версия [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(`.bin-файл`, соответствующий вашей версии прошивки)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Инструкция @@ -33,12 +24,11 @@ Soundhax (в сочетании с pre9otherapp) совместим с верс 1. Выключите консоль 1. Вставьте SD-карту в компьютер 1. Скопируйте Soundhax `.m4a` в корень вашей SD-карты -1. Скопируйте pre9otherapp payload в корень вашей SD-карты и переименуйте его в `otherapp.bin` -1. Скопируйте файл `boot.firm` из `.zip-архива` Luma3DS в корень SD-карты -1. Скопируйте `boot.3dsx` в корень SD-карты +1. Copy `otherapp.bin` to the root of your SD card +1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты 1. Создайте папку `boot9strap` в корне SD-карты 1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты -1. Скопируйте `arm9.bin` из `.zip-ахрива` SafeB9SInstaller в корень SD-карты +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Вставьте SD-карту обратно в консоль 1. Включите консоль @@ -55,7 +45,7 @@ Soundhax (в сочетании с pre9otherapp) совместим с верс + Если запустить Soundhax не закрыв приложение, то птичка будет появляться при каждом запуске программы, до тех пор, пока вы не выполните этот пункт 1. Перейдите в `/SDCARD`, затем начните воспроизведение "<3 nedwill 2016" + Может потребоваться несколько попыток - + При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ru_RU/installing-boot9strap-(ssloth-browser).txt b/_pages/ru_RU/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..d8518f33ce --- /dev/null +++ b/_pages/ru_RU/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### Что понадобится + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Часть I - Подготовительные работы + +1. Выключите консоль +1. Вставьте SD-карту в компьютер +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты +1. Создайте папку `boot9strap` в корне SD-карты +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Вставьте SD-карту обратно в консоль +1. Включите консоль + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Выключите консоль + +#### Section III - Launching SafeB9SInstaller +1. Включите консоль +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + При возникновении ошибки, обратитесь к разделу [Проблемы и их решения](troubleshooting#не-работает-эксплойт-на-основе-браузера) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. Если эксплойт сработал, запустится SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Дождитесь окончания всех проверок безопасности +1. При появлении запроса, введите указанную комбинацию кнопок для установки boot9strap +1. После завершения процесса, нажмите (A) для перезагрузки + +#### Section V - Configuring Luma3DS + +1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS + + Если экран остаётся чёрным, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap) +1. Нажимая (A) выберите следующие пункты: + + **"Show NAND or user string in System Settings"** +1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Выключите консоль + +___ + +### Следующий шаг: [Завершение установки](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/ru_RU/installing-boot9strap-(usm).txt b/_pages/ru_RU/installing-boot9strap-(usm).txt index 41f8e5278d..43c5551cd9 100644 --- a/_pages/ru_RU/installing-boot9strap-(usm).txt +++ b/_pages/ru_RU/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Установка boot9strap (USM)" {% include toc title="Содержание" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Обязательно к прочтению Для того, чтобы использовать уязвимость в SAFE_MODE прошивке консоли, нам нужно внедрить модифицированный WiFi профиль. @@ -17,30 +20,31 @@ title: "Установка boot9strap (USM)" Эти инструкции работают на консолях регионов USA, Europe, Japan и Korea. На регион консоли указывает буква U, E, J или K после версии прошивки. Если кнопки (L), (R), (Вверх) или (A) не работают, вам нужно будет использовать [Устаревший метод](legacy-methods). Если вам нужна помощь в этом деле, зайдите на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) вам помочь. -{: .notice--danger} +{: .notice--warning} ### Что понадобится * Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer) -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Часть I - Подготовительные работы -1. Перейдите по ссылке [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) на компьютере - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Загрузите свой movable.sed, используя опцию "Выберите файл" 1. Нажмите кнопку "Download unSAFE_MODE-bb3 archive" - + Начнется загрузка эксплойта DSiWare `F00D43D5.bin` и файла с данными для SAFE_MODE эксплойта `usm.bin` внутри zip-архива (`unSAFE_MODE-bb3.zip`) -1. Если консоль включена, выключите консоль + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Вставьте SD-карту в компьютер 1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты -1. Скопируйте файл `usm.bin` из `.zip-архива` USM (`unSAFE_MODE-bb3.zip`) в корень SD-карты -1. Перейдите в папку `Nintendo 3DS` -> `` -> `<32-значный-id>` -> `Nintendo DSiWare` на SD-карте - + `` будет таким же, как и на странице [Seedminer](seedminer) - + Если папка `Nintendo DSiWare` не существует, создайте ее + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Перейдите в папку `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` на SD-карте + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. Если в этой папке уже есть файлы бэкапа DSiWare (`<8-значный-id>.bin`), переместите их на компьютер + На этом шаге папка Nintendo DSiWare должна быть пустой. Перемещение файлов на компьютер гарантирует, что вы не удалите свои собственные бэкапы -1. Скопируйте файл `F00D43D5.bin` из `.zip-архива` USM (`unSAFE_MODE-bb3.zip`) в папку `Nintendo DSiWare` +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Часть II - BannerBomb3 @@ -55,14 +59,15 @@ title: "Установка boot9strap (USM)" #### Часть III - unSAFE_MODE -1. Когда консоль все еще выключена, удерживайте следующие кнопки: (L) + (R) + (Вверх) + (A), затем нажмите кнопку питания - + Отпустите кнопки через несколько секунд. Ваша консоль загрузится в безопасный режим +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Нажмите "OK" чтобы начать обновление + Обновления не будет. Это часть эксплойта 1. Нажмите "Я принимаю" чтобы принять условия 1. В конечном итоге обновление завершится ошибкой с кодом `003-1099`. Это ожидаемое поведение 1. При запросе "Выполнить Интернет-настройки?", выберите "Выполнить" 1. В следующем меню перейдите в `Связь 1` -> `Изменить настройки` -> `Следующая страница (стрелка вправо)` -> `Настройки прокси` -> `Подробнее` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Как только вы увидите `B9S install SUCCESS` на верхнем экране, нажмите любую кнопку, чтобы перезагрузиться в меню настроек Luma #### Часть IV - Настройка Luma3DS @@ -81,10 +86,8 @@ title: "Установка boot9strap (USM)" + Нижний экран должен мигнуть зеленым, через несколько секунд консоль перезагрузится в меню HOME. Это означает, что профили конфигурации WiFi были успешно восстановлены 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Перейдите в папку `Nintendo 3DS` -> `` -> `<32-значный-id>` -> `Nintendo DSiWare` на SD-карте - + `` будет таким же, как и на странице [Seedminer](seedminer) +1. Перейдите в папку `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` на SD-карте 1. Удалите `F00D43D5.bin` из папки Nintendo DSiWare -1. Переходите к Завершению установки ___ diff --git a/_pages/ru_RU/legacy-methods.txt b/_pages/ru_RU/legacy-methods.txt index d918019426..804b7b0b1d 100644 --- a/_pages/ru_RU/legacy-methods.txt +++ b/_pages/ru_RU/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Устаревшие методы" За последнее время было сделано несколько улучшений и усовершенствований в методах установки CFW. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. Однако, "legacy" или устаревшие методы хранятся здесь для различных целей. Они потребуют, чтобы вы сначала выполнили инструкции на странице [Seedminer](seedminer). @@ -18,7 +18,7 @@ For this reason, it is recommended you use the most up-to-date method found on t Следующие эксплойты используют одно из двух DS приложений, встроенных в 3DS: DS Internet Settings и DS Download Play. -Если оба приложения DS Internet Settings и DS Download Play не работают, то вам придется восстановить их с помощью [TWLFix-3DS](https://github. om/MechanicalDragon0687/TWLFix-3DS/releases/), используя другой способ запуска хоумбрю, например Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### Тест DS Internet Settings (используется для Fredtool) @@ -38,9 +38,7 @@ For this reason, it is recommended you use the most up-to-date method found on t ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + Этот метод рекомендуется, если боковые кнопки консоли не работают -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + Этот метод рекомендуется, если меню управления DSiWare не работает \ No newline at end of file diff --git a/_pages/ru_RU/ntrboot.txt b/_pages/ru_RU/ntrboot.txt index b2f7fd33dc..61f0e39c00 100644 --- a/_pages/ru_RU/ntrboot.txt +++ b/_pages/ru_RU/ntrboot.txt @@ -17,23 +17,23 @@ title: "ntrboot" | Флешкартридж | Текущая стоимость | "Time Bomb"? | Версия 3DS? | Версия DSi? | Примечания | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | **Поставляется с предустановленным ntrboot**; может быть прошит обратно в режим NDS флешкартриджа. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | Нет | <= 11.13.0 | <= 1.4.5 | **Поставляется с предустановленным ntrboot** ([внутренний переключатель для переключения между режимами ntrboot и NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); не прошивайте ntrboot вручную. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | Нет | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | Нет | Ни одна | Ни одна | Только определенные [ревизии](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) совместимы с ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | Нет | <= 11.13.0 | <= 1.4.5 | Все RTS ревизии совместимы. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | Все R4iSDHC 20XX одинаковы. Модели 2013 несовместимы. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | Все R4iSDHC 20XX одинаковы. Модели 2013 несовместимы. | -| **Ace3DS X** | | Нет | <= 11.13.0 | <= 1.4.5 | **Поставляется с предустановленным ntrboot** (внешний переключатель для переключения между режимами ntrboot ("3DS") и NDS); не прошивайте ntrboot вручную. | -| **Ace3DS Plus** | | Нет | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Модели 2013 несовместимы. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Модели 2013 несовместимы. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | Нет | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | Нет | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | Нет | Ни одна | Ни одна | | | **R4i Gold 3DS Deluxe "Starter"** | | Нет | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | Нет | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Неизвестно | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | Все R4iSDHC 20XX одинаковы. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/ru_RU/region-changing.txt b/_pages/ru_RU/region-changing.txt index 58bb147fe3..db9b7f5f9d 100644 --- a/_pages/ru_RU/region-changing.txt +++ b/_pages/ru_RU/region-changing.txt @@ -17,7 +17,7 @@ title: "Смена региона" Этот процесс отсоединит NNID от приставки, поскольку он больше не будет совместим с вашей консолью. NNID привязан к конкретному устройству и к его региону, поэтому перенос NNID между приставками с разными регионами невозможен без применения [крайне сложных операций](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -После этого только **New 3DS, которая никогда до этого не была привязана к eShop** и **любая Old 3DS** смогут подключиться к eShop и использовать все его возможности уже в новом регионе. New 3DS, которые сменили регион и уже подключались к eShop на оригинальном регионе, не смогут создать новый NNID и подключаться к eShop с новым регионом! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Заметьте, что иногда eShop не работает там, где он, казалось бы, должен работать. Такое поведение объясняется особенностями работы серверов Nintendo, и я не могу на них повлиять. Кроме того, иногда eShop работает там, где не должен (например на некоторых New 3DS). Причины на данный момент неизвестны. @@ -55,12 +55,34 @@ title: "Смена региона" 1. Скопируйте `FBI.3dsx` в папку `/3ds/` на SD-карте 1. Вставьте SD-карту обратно в консоль -#### Часть II - CTRTransfer - +#### Section II - NAND Backup 1. Запустите GodMode9, держа нажатой кнопку (Start) во время загрузки 1. Если вам предложат создать бэкап важных файлов, нажмите кнопку (A) чтобы сделать это, затем нажмите (A) чтобы продолжить после завершения 1. Если вам предложат выставить RTC дату и время, нажмите кнопку (A) чтобы сделать это, настройте дату и время, затем нажмите (A) чтобы продолжить + Обратите внимание, что если вы выставили RTC дату и время, вам также придется исправить время в Системных настройках после завершения руководства +1. Нажмите кнопку (Home) для вызова меню +1. Выберите "Scripts..." +1. Выберите "GM9Megascript" +1. Выберите "Backup Options" +1. Выберите "SysNAND Backup" +1. Нажмите (A) для подтверждения + + Этот процесс займет некоторое время + + Если появляется ошибка, убедитесь, что у вас есть по крайней мере 1,3 ГБ свободного места на SD-карте +1. Нажмите (A), чтобы продолжить +1. Нажмите (B) для возврата в главное меню +1. Выберите "Exit" +1. Нажмите (A) чтобы восстановить запрет на запись, если появится запрос +1. Удерживая (R) нажмите (B) для того, чтобы извлечь SD-карту +1. Вставьте SD-карту в компьютер +1. Скопируйте `__sysnand_###.bin` и `essential.exefs` из папки `/gm9/out/` на SD-карте в безопасное место на вашем компьютере + + Сделайте несколько резервных копий в нескольких местах (например в облачном хранилище) + + Эти бэкапы позволят восстановить консоль и/или извлечь файлы из образа NAND, если что-то пойдёт не так +1. После копирования удалите `__sysnand_###.bin` и `__sysnand_###.bin.sha` из папки `/gm9/out/` на SD-карте +1. Вставьте SD-карту обратно в консоль + + Если ваша SD-карта не определилась, удерживая (R) нажмите (B) чтобы заново смонтировать карту + +#### Section III - CTRTransfer + 1. Перейдите в `[0:] SDCARD` -> `gm9` 1. Нажмите (A) чтобы выбрать файл `.bin` CTRTransfer 1. Выберите "CTRNAND options..." @@ -87,7 +109,7 @@ title: "Смена региона" + Обновление консоли с установленным B9S + Luma (именно они установлены у вас) безопасно + При появлении ошибки, поставьте в настройках подключения, в настройках DNS "Получать DNS автоматически" в положение "Да" -#### Часть III - Запуск FBI +#### Section IV - Launching FBI 1. Запустите приложение Загружаемая игра (этот [значок]({{ "/images/download-play-icon.png" | absolute_url }})) 1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina @@ -100,7 +122,7 @@ title: "Смена региона" 1. Запустите приложение Загружаемая игра 1. Консоль должна загрузиться в Homebrew Launcher -#### Часть IV - Переустановка тикетов +#### Section V - Reinstalling Tickets Если скрипт не нашел пользовательских ticket-файлов и просил вас пропустить эту часть (Skip the 'Reinstalling Tickets' section), пропустите эту часть {: .notice--info} @@ -120,14 +142,14 @@ title: "Смена региона" + Нажмите (B) для отмены установки тикетов из CDN. 1. Нажмите (Home) для выхода из FBI -#### Часть V - Региональные настройки +#### Section VI - Region settings 1. Откройте Системные настройки (System settings) 1. Перейдите в "Прочие настройки" (Other Settings), затем "Профиль" (Profile), затем "Настройки региона" (Region Settings) 1. Выберите страну из вашего нового региона 1. При появлении запроса о штате указывать его не нужно -#### Часть VI - Удаление образа CTRTransfer +#### Section VII - Remove CTRTransfer image 1. Запустите GodMode9, держа нажатой кнопку (Start) во время загрузки 1. Перейдите в `[0:] SDCARD` -> `gm9` diff --git a/_pages/ru_RU/restoring-cfw.txt b/_pages/ru_RU/restoring-cfw.txt new file mode 100644 index 0000000000..adbe12611c --- /dev/null +++ b/_pages/ru_RU/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Содержание" %} + +### Обязательно к прочтению + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### Что понадобится +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Инструкция + +#### Часть I - Подготовительные работы + +1. Вставьте SD-карту в компьютер +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Вставьте SD-карту обратно в консоль + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Нажимая (A) выберите следующие пункты: + * **"Show NAND or user string in System Settings"** +1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + +___ + +### Следующий шаг: [Завершение установки](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/ru_RU/seedminer.txt b/_pages/ru_RU/seedminer.txt index 4e126193fd..69c05c3b24 100644 --- a/_pages/ru_RU/seedminer.txt +++ b/_pages/ru_RU/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Содержание" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Обязательно к прочтению -Чтобы установить boot9strap на консоль, мы используем уязвимость в ограничениях безопасности для приложений "DSiWare". +To install boot9strap on your device, we derive your device's unique encryption key. Для достижения этой цели, мы используем инструмент под названием Seedminer, чтобы вычислить ключ шифрования DSiWare (`movable.sed`) вашей консоли. Затем мы используем этот ключ шифрования DSiWare, чтобы расшифровать совместимое DSiWare приложение и внедрить в него эксплойт для запуска нашего собственного кода (используемый эксплойт зависит от региона консоли). @@ -16,21 +19,7 @@ title: "Seedminer" ### Инструкция -#### Часть I - Проверка совместимости - -Несмотря на то, что эта проверка не является строго необходимой для эксплойта Seedminer, последующие эксплойты требуют выполнения этой проверки, и было бы пустой тратой времени и сил применять эксплойт Seedminer, не имея возможности использовать другие эксплойты. - -Есть несколько различных методов дальнейшей эксплуатации Seedminer, так что даже если этот тест завершится неудачей, вы сможете использовать другой метод. - -#### Тест меню управления DSiWare (используется для unSAFE_MODE) - -1. Перейдите в "Системные настройки", "Управление данными", "DSiWare" -1. Если консоль не зависает, тест был пройден успешно - + Если консоль вылетает в меню HOME, значит тест не удался, и вам придется использовать устаревший метод внизу этой страницы - + Если вы видите цветной экран перед вылетом в меню HOME, обратитесь на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) кого-нибудь вам помочь -1. Выйдите в меню HOME - -#### Часть II - Подготовка +#### Часть I - Подготовительные работы 1. Вставьте SD-карту в компьютер 1. Перейдите в папку `Nintendo 3DS` на SD-карте @@ -49,46 +38,46 @@ title: "Seedminer" + Имя этой папки также известно как ваш "ID0" 1. Включите консоль 1. Откройте Список друзей ([оранжевый значок в виде лица]({{ "/images/friend-list-icon.png" | absolute_url }}) на верхней строчке меню HOME) - + Если появляется ошибка и вас не пускают в меню, значит вам нужно либо создать новый Mii, либо консоль не может подключиться к серверам Nintendo (по причине бана или проблем с соединением) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Найдите свой профиль Mii, затем найдите поле "Код друга" на верхнем экране -#### Часть III - Seedminer +#### Section II - Seedminer 1. Перейдите по ссылке [Bruteforce Movable](https://seedminer.hacks.guide/) на компьютере + Этот сайт может автоматизировать процесс получения `movable_part1.sed` (при помощи консоли-бота 3DS) и процесс взлома шифрования DSiWare вашей консоли (используя компьютер волонтера для запуска Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Введите Код друга вашей консоли (без пробелов или тире) в поле "Your friend code" 1. Вставьте имя папки из 32 символов в поле "Your ID0" + Не пытайтесь вводить ID0 вручную. Убедитесь, что ID0 введён правильно, скопировав и вставив его из документа, где вы сохранили его в предыдущей части 1. Выберите "Go" - + Если сайт сразу переходит к шагу номер 4, скачайте свой файл `movable.sed` и переходите к следующей части. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. При появлении запроса, используйте кнопку "Регистрация друга" на консоли, чтобы добавить код друга консоли-бота 3DS 1. Дождитесь обновления страницы + Если этого не происходит, подождите несколько минут и обновите страницу один раз самостоятельно 1. Как только сайт обработает вашу информацию, вам будет предоставлен выбор "Continue" или "Do another device". Нажмите на зеленую кнопку "Continue" 1. Дождитесь окончания оставшейся части процесса - + Это обычно занимает 1-5 минут, но в некоторых случаях может занять до получаса. - + Во время этого процесса бот, которого вы добавили, может не отображаться на вашей 3DS. Если страница продолжает обновляться, то это не проблема. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + Если вы все еще в ожидании по прошествии получаса, обратитесь на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) кого-нибудь вам помочь 1. После окончания процесса скачайте с сайта свой файл `movable.sed` + Сохраните этот файл, так как он понадобится вам на следующих страницах ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для того, чтобы воспользоваться уязвимостями в SAFE_MODE прошивке, присутствующей на всех консолях 3DS. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -Этот метод совместим со всеми регионами, но в этом руководстве не рассматривается регион CHN. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Следующий шаг: [Установка boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Устаревшие методы +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -Эти методы являются устаревшими и не рекомендуются, если не указано иное. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Устаревшие методы](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/ru_RU/site-navigation.txt b/_pages/ru_RU/site-navigation.txt index 3cc14c7d77..44b4639008 100644 --- a/_pages/ru_RU/site-navigation.txt +++ b/_pages/ru_RU/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Популярные** + [Завершение установки](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Установка boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Установка boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Обновление картриджем](cart-update) + [Благодарности](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Пожертвования](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Прошивка ntrboot (Две консоли 3DS)](flashing-ntrboot-(3ds-multi-system)) + [Прошивка ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Прошивка ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Начало](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [Использование GodMode9](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Главная](/) + [Homebrew Launcher (Альтернативы)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Установка boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Установка boot9strap (Браузер)](installing-boot9strap-(browser)) + [Установка boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Установка boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Установка boot9strap (MSET)](installing-boot9strap-(mset)) + [Установка boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Установка boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Установка boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Установка boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Перенос EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Смена региона](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Устаревшие методы Seedminer](legacy-methods) + [Проблемы и их решения](troubleshooting) + [Удаление кастомной прошивки](uninstall-cfw) + [Обновление B9S](updating-b9s) diff --git a/_pages/ru_RU/updating-b9s.txt b/_pages/ru_RU/updating-b9s.txt index 229035ffee..f02bd4f1c7 100644 --- a/_pages/ru_RU/updating-b9s.txt +++ b/_pages/ru_RU/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Обновление B9S" Эта страница предназначена для пользователей boot9strap, чтобы они могли обновить установленный boot9strap до последней версии. -{% capture notice-1 %} -Сообщается о волне банов, выданных Nintendo пользователям CFW. Чтобы защитить себя, выполните следующие шаги перед началом этого руководства: - -1. Откройте Системные настройки, затем "Интернет-настройки", затем "SpotPass", затем "Отправка информации о системе" -1. Отключите опцию "Отправка информации о системе" -1. Закройте Системные настройки (System settings) -1. Откройте Список друзей ([оранжевый значок в виде лица]({{ "/images/friend-list-icon.png" | absolute_url }}) на верхней строчке меню HOME) - + Если появляется ошибка и вас не пускают в меню, значит либо нужная настройка в Списке друзей уже отключена, либо консоль не может подключиться к серверам Nintendo (по причине бана или проблем с соединением) -1. Перейдите в настройки Списка друзей, затем "Настройки сообщений друга", затем "Показать друзьям, во что вы играете" -1. Отключите опцию "Показать друзьям, во что вы играете" -1. Закройте Список друзей - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### Что понадобится * Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `devkit-файл`, не `ntr-файл`)* -* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Инструкция @@ -39,7 +25,6 @@ title: "Обновление B9S" {: .notice--info} 1. Вставьте SD-карту в компьютер -1. Скопируйте `boot.3dsx` в корень SD-карты 1. Создайте папку `boot9strap` в корне SD-карты 1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты 1. Скопируйте `SafeB9SInstaller.firm` из `.zip-архива` SafeB9SInstaller в папку `/luma/payloads/` на SD-карте @@ -58,7 +43,7 @@ title: "Обновление B9S" 1. Выключите консоль 1. Вставьте SD-карту в компьютер -1. Скопируйте `boot.firm` из `.zip-архива` Luma3DS в корень SD-карты, соглашаясь на перезапись файла +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Вставьте SD-карту обратно в консоль 1. Включите консоль diff --git a/_pages/sv_SE/a9lh-to-b9s.txt b/_pages/sv_SE/a9lh-to-b9s.txt index ac303ddc4f..a3384b0eeb 100644 --- a/_pages/sv_SE/a9lh-to-b9s.txt +++ b/_pages/sv_SE/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. För skydda dig själv, följ dessa steg innan du börjar guiden: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Stäng av din enhet 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/sv_SE/bannerbomb3.txt b/_pages/sv_SE/bannerbomb3.txt index d765ab8cab..4a1591538b 100644 --- a/_pages/sv_SE/bannerbomb3.txt +++ b/_pages/sv_SE/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Obligatorisk läsning To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/sv_SE/checking-for-cfw.txt b/_pages/sv_SE/checking-for-cfw.txt new file mode 100644 index 0000000000..30e2c1f7b8 --- /dev/null +++ b/_pages/sv_SE/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Obligatorisk läsning + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/sv_SE/credits.txt b/_pages/sv_SE/credits.txt index b3fed46ac1..e073c990f9 100644 --- a/_pages/sv_SE/credits.txt +++ b/_pages/sv_SE/credits.txt @@ -2,6 +2,9 @@ title: "Tack till" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Särskilt tack till alla från [#Cakey på Freenode](http://webchat.freenode.net/?channels=%23Cakey) för att ni är superstjärnor!** {: .notice--primary} @@ -22,7 +25,7 @@ Kontakta mig om jag glömde dig här så lägger jag till ditt namn. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Kontakta mig om jag glömde dig här så lägger jag till ditt namn. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Kontakta mig om jag glömde dig här så lägger jag till ditt namn. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/sv_SE/dsidumper.txt b/_pages/sv_SE/dsidumper.txt index 495da6ce63..9762798a6c 100644 --- a/_pages/sv_SE/dsidumper.txt +++ b/_pages/sv_SE/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Obligatorisk läsning - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Stäng av din enhet -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Sätt tillbaka ditt SD-kort i din enhet -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/sv_SE/faq.txt b/_pages/sv_SE/faq.txt index 6f77735450..d76a6842a8 100644 --- a/_pages/sv_SE/faq.txt +++ b/_pages/sv_SE/faq.txt @@ -6,7 +6,7 @@ title: "Vanliga Frågor" **S:** Ja ** fråga: ** * Hur uppdaterar jag Luma3DS? * -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. ** fråga: ** * jag hörde talas om jag måste betala för (Gateway, Sky3DS, etc). Är det något jag behöver? * **S:** Nej. boot9strap är en överlägsen metod för att ladda hack som körs tidigt i boot. diff --git a/_pages/sv_SE/finalizing-setup.txt b/_pages/sv_SE/finalizing-setup.txt index cdecd99342..73b2ca82f0 100644 --- a/_pages/sv_SE/finalizing-setup.txt +++ b/_pages/sv_SE/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Stäng av din enhet 1. Insert your SD card into your computer 1. Skapa en mapp som heter '3ds' i roten på SD-kortet om det inte redan finns + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Skapa en mapp vid namn `cias` i roten av ditt SD-kort om den inte redan finns 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Kopiera `FBI.3dsx` till mappen `/3ds/` på ditt SD-kort 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Kopiera 'GodMode9.firm' från GodMode9 `.zip` till `/luma/payloads/` mappen på ditt SD-kort 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Stäng av din enhet -1. Starta GodMode9 genom att hålla (Start) under uppstart +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/sv_SE/flashing-ntrboot-(3ds-multi-system).txt b/_pages/sv_SE/flashing-ntrboot-(3ds-multi-system).txt index ffe9f4a0b8..1c44c102e3 100644 --- a/_pages/sv_SE/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/sv_SE/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt b/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt index d5e94856b8..a181a16269 100644 --- a/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/sv_SE/flashing-ntrboot-(nds).txt b/_pages/sv_SE/flashing-ntrboot-(nds).txt index 0719bda4a6..13b5472c48 100644 --- a/_pages/sv_SE/flashing-ntrboot-(nds).txt +++ b/_pages/sv_SE/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/sv_SE/formatting-sd-(linux).txt b/_pages/sv_SE/formatting-sd-(linux).txt new file mode 100644 index 0000000000..f3ab4f01a4 --- /dev/null +++ b/_pages/sv_SE/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Obligatorisk läsning + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/sv_SE/formatting-sd-(mac).txt b/_pages/sv_SE/formatting-sd-(mac).txt new file mode 100644 index 0000000000..dc4b28ace7 --- /dev/null +++ b/_pages/sv_SE/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Obligatorisk läsning + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/sv_SE/formatting-sd-(windows).txt b/_pages/sv_SE/formatting-sd-(windows).txt new file mode 100644 index 0000000000..1667e68944 --- /dev/null +++ b/_pages/sv_SE/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Obligatorisk läsning + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/sv_SE/get-started-(new-3ds).txt b/_pages/sv_SE/get-started-(new-3ds).txt index a356bbb8ee..52af1e5d95 100644 --- a/_pages/sv_SE/get-started-(new-3ds).txt +++ b/_pages/sv_SE/get-started-(new-3ds).txt @@ -4,65 +4,51 @@ title: "Get Started (New 3DS)" {% include toc title="Table of Contents" %} -### Required Reading +### Obligatorisk läsning -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/sv_SE/get-started-(old-3ds).txt b/_pages/sv_SE/get-started-(old-3ds).txt index 8fc9ad47a9..d680ded768 100644 --- a/_pages/sv_SE/get-started-(old-3ds).txt +++ b/_pages/sv_SE/get-started-(old-3ds).txt @@ -4,23 +4,18 @@ title: "Get Started (Old 3DS)" {% include toc title="Table of Contents" %} -### Required Reading +### Obligatorisk läsning -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/sv_SE/get-started.txt b/_pages/sv_SE/get-started.txt index 358398d2dd..0c25301c71 100644 --- a/_pages/sv_SE/get-started.txt +++ b/_pages/sv_SE/get-started.txt @@ -6,85 +6,16 @@ titel: ”Kom igång” ### Obligatorisk läsning -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Om du redan har hackat din 3Ds och har en EmuNAND-baserad konfiguration med CFW så följ alla instruktioner medan du är på SysNAND. Ersätt alla filer som redan finns. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -Denna sida är för instruktioner om hur du installerar boot9strap till en 3DS eller 2DS *Ofw*. Om du redan har arm9loaderhax installerad och funderar på att uppdatera till boot9strap, följ [A9LH till B9S](a9lh-to-b9s). -{: .notice--primary} - -Innan du börjar, bör Windows-användare aktivera alternativet att Visa filändelser [filändelser (Windows)](file-extensions-(windows))! -{: .notice--info} - -Innan du börjar så bör du söka igenom ditt SD-kort efter fel med [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), eller [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/sv_SE/godmode9-usage.txt b/_pages/sv_SE/godmode9-usage.txt index e38bb7b4b3..53e9c6a36b 100644 --- a/_pages/sv_SE/godmode9-usage.txt +++ b/_pages/sv_SE/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Obligatorisk läsning diff --git a/_pages/sv_SE/home.txt b/_pages/sv_SE/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/sv_SE/home.txt +++ b/_pages/sv_SE/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt b/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt index 06447cd09d..487f25a45c 100644 --- a/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Obligatorisk läsning - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/sv_SE/homebrew-launcher-(pichaxx).txt b/_pages/sv_SE/homebrew-launcher-(pichaxx).txt index 97d845cfc3..b61c52b8a0 100644 --- a/_pages/sv_SE/homebrew-launcher-(pichaxx).txt +++ b/_pages/sv_SE/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Obligatorisk läsning This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Skapa en mapp som heter '3ds' i roten på SD-kortet om det inte redan finns #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Stäng av din enhet ___ diff --git a/_pages/sv_SE/homebrew-launcher-(soundhax).txt b/_pages/sv_SE/homebrew-launcher-(soundhax).txt index 2fe9c7c9b9..7137c8fac7 100644 --- a/_pages/sv_SE/homebrew-launcher-(soundhax).txt +++ b/_pages/sv_SE/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/sv_SE/homebrew-launcher-(steelhax).txt b/_pages/sv_SE/homebrew-launcher-(steelhax).txt index 2ac226c9e7..65ec1b9a69 100644 --- a/_pages/sv_SE/homebrew-launcher-(steelhax).txt +++ b/_pages/sv_SE/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Obligatorisk läsning - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Skapa en mapp som heter '3ds' i roten på SD-kortet om det inte redan finns -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Stäng av din enhet -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Sätt tillbaka ditt SD-kort i din enhet -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/sv_SE/installing-boot9strap-(browser).txt b/_pages/sv_SE/installing-boot9strap-(browser).txt index 95adc19753..6053524808 100644 --- a/_pages/sv_SE/installing-boot9strap-(browser).txt +++ b/_pages/sv_SE/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Obligatorisk läsning + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Stäng av din enhet 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/sv_SE/installing-boot9strap-(fredtool).txt b/_pages/sv_SE/installing-boot9strap-(fredtool).txt index 5d69055038..f7a2e3c457 100644 --- a/_pages/sv_SE/installing-boot9strap-(fredtool).txt +++ b/_pages/sv_SE/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Obligatorisk läsning This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Stäng av din enhet 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device diff --git a/_pages/sv_SE/installing-boot9strap-(frogtool).txt b/_pages/sv_SE/installing-boot9strap-(frogtool).txt index c2f8a3870f..8acbddcb47 100644 --- a/_pages/sv_SE/installing-boot9strap-(frogtool).txt +++ b/_pages/sv_SE/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Obligatorisk läsning We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Sätt tillbaka ditt SD-kort i din enhet @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/sv_SE/installing-boot9strap-(hardmod).txt b/_pages/sv_SE/installing-boot9strap-(hardmod).txt index a4d164c82f..793c2c8510 100644 --- a/_pages/sv_SE/installing-boot9strap-(hardmod).txt +++ b/_pages/sv_SE/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt index dd6e02d498..a42d09cecd 100644 --- a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt +++ b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Obligatorisk läsning - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt index 7602ca6f97..d8fd73c370 100644 --- a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt +++ b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Stäng av din enhet -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Sätt tillbaka ditt SD-kort i din enhet +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/sv_SE/installing-boot9strap-(pichaxx).txt b/_pages/sv_SE/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..7c50d90f62 --- /dev/null +++ b/_pages/sv_SE/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Obligatorisk läsning + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Stäng av din enhet +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Sätt tillbaka ditt SD-kort i din enhet +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/sv_SE/installing-boot9strap-(safecerthax).txt b/_pages/sv_SE/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..3def6e9691 --- /dev/null +++ b/_pages/sv_SE/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Obligatorisk läsning + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Stäng av din enhet +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Sätt tillbaka ditt SD-kort i din enhet +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Stäng av din enhet + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Stäng av din enhet + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/sv_SE/installing-boot9strap-(soundhax).txt b/_pages/sv_SE/installing-boot9strap-(soundhax).txt index 8136da684b..b0ab6249d3 100644 --- a/_pages/sv_SE/installing-boot9strap-(soundhax).txt +++ b/_pages/sv_SE/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Obligatorisk läsning -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Stäng av din enhet 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/sv_SE/installing-boot9strap-(ssloth-browser).txt b/_pages/sv_SE/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..3936bd0991 --- /dev/null +++ b/_pages/sv_SE/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Obligatorisk läsning + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Stäng av din enhet +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Sätt tillbaka ditt SD-kort i din enhet +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Stäng av din enhet + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Stäng av din enhet + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/sv_SE/installing-boot9strap-(usm).txt b/_pages/sv_SE/installing-boot9strap-(usm).txt index e4e4211648..b1a57eac9c 100644 --- a/_pages/sv_SE/installing-boot9strap-(usm).txt +++ b/_pages/sv_SE/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Obligatorisk läsning In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Stäng av din enhet 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/sv_SE/legacy-methods.txt b/_pages/sv_SE/legacy-methods.txt index 04c6ca48fb..f6e5cea4a0 100644 --- a/_pages/sv_SE/legacy-methods.txt +++ b/_pages/sv_SE/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/sv_SE/ntrboot.txt b/_pages/sv_SE/ntrboot.txt index de9e5ad355..13aac0c727 100644 --- a/_pages/sv_SE/ntrboot.txt +++ b/_pages/sv_SE/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/sv_SE/region-changing.txt b/_pages/sv_SE/region-changing.txt index 33a7a4fa52..1eb3b6d8f4 100644 --- a/_pages/sv_SE/region-changing.txt +++ b/_pages/sv_SE/region-changing.txt @@ -17,7 +17,7 @@ Observera att om du har någon annan payload än `GodMode9.firm` i mappen `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ Du MÅSTE redan ha installerat Luma3DS och boot9strap eller arm9loaderhax för a 1. Kopiera `FBI.3dsx` till mappen `/3ds/` på ditt SD-kort 1. Sätt tillbaka ditt SD-kort i din enhet -### I avsnitt II - CTRTransfer - +#### Section II - NAND Backup 1. Starta GodMode9 genom att hålla (Start) under uppstart 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + Denna process kommer att ta lite tid + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Sätt tillbaka ditt SD-kort i din enhet + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigera till `[0:] SDCARD` -> `gm9` 1. Tryck på (A) på CTRTransfer '.bin' för att välja den 1. Välj "CTRNAND options..." @@ -87,7 +109,7 @@ Du MÅSTE redan ha installerat Luma3DS och boot9strap eller arm9loaderhax för a + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ Du MÅSTE redan ha installerat Luma3DS och boot9strap eller arm9loaderhax för a 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Starta GodMode9 genom att hålla (Start) under uppstart 1. Navigera till `[0:] SDCARD` -> `gm9` diff --git a/_pages/sv_SE/restoring-cfw.txt b/_pages/sv_SE/restoring-cfw.txt new file mode 100644 index 0000000000..c0eab7f392 --- /dev/null +++ b/_pages/sv_SE/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Obligatorisk läsning + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Sätt tillbaka ditt SD-kort i din enhet + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/sv_SE/seedminer.txt b/_pages/sv_SE/seedminer.txt index 0b91676fc0..659f19b8a8 100644 --- a/_pages/sv_SE/seedminer.txt +++ b/_pages/sv_SE/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Obligatorisk läsning -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/sv_SE/site-navigation.txt b/_pages/sv_SE/site-navigation.txt index 7e925ee149..d7962dc6bb 100644 --- a/_pages/sv_SE/site-navigation.txt +++ b/_pages/sv_SE/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Populära** + [Slutför installationen](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donationer](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flasha ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flasha ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flasha ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Kom igång](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Hem](/) + [Homebrew Launcher (Alternativ)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installera boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installera boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installera boot9strap (MSET)](installing-boot9strap-(mset)) + [Installera boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Flytta EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Ändra Region](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Felsökning](troubleshooting) + [Avinstallera CFW](uninstall-cfw) + [Updatera B9S](updating-b9s) diff --git a/_pages/sv_SE/updating-b9s.txt b/_pages/sv_SE/updating-b9s.txt index 1ca440a9c6..b1a31dcacf 100644 --- a/_pages/sv_SE/updating-b9s.txt +++ b/_pages/sv_SE/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. För skydda dig själv, följ dessa steg innan du börjar guiden: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Stäng av din enhet 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Sätt tillbaka ditt SD-kort i din enhet 1. Power on your device diff --git a/_pages/th_TH/a9lh-to-b9s.txt b/_pages/th_TH/a9lh-to-b9s.txt index 60eaed476f..ec52109ad7 100644 --- a/_pages/th_TH/a9lh-to-b9s.txt +++ b/_pages/th_TH/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/th_TH/bannerbomb3.txt b/_pages/th_TH/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/th_TH/bannerbomb3.txt +++ b/_pages/th_TH/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/th_TH/checking-for-cfw.txt b/_pages/th_TH/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/th_TH/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/th_TH/credits.txt b/_pages/th_TH/credits.txt index e66f591db9..c30986407b 100644 --- a/_pages/th_TH/credits.txt +++ b/_pages/th_TH/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/th_TH/dsidumper.txt b/_pages/th_TH/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/th_TH/dsidumper.txt +++ b/_pages/th_TH/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/th_TH/faq.txt b/_pages/th_TH/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/th_TH/faq.txt +++ b/_pages/th_TH/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/th_TH/finalizing-setup.txt b/_pages/th_TH/finalizing-setup.txt index 90f49a797f..6f9a26a828 100644 --- a/_pages/th_TH/finalizing-setup.txt +++ b/_pages/th_TH/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/th_TH/flashing-ntrboot-(3ds-multi-system).txt b/_pages/th_TH/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/th_TH/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/th_TH/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt b/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/th_TH/flashing-ntrboot-(nds).txt b/_pages/th_TH/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/th_TH/flashing-ntrboot-(nds).txt +++ b/_pages/th_TH/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/th_TH/formatting-sd-(linux).txt b/_pages/th_TH/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/th_TH/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/th_TH/formatting-sd-(mac).txt b/_pages/th_TH/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/th_TH/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/th_TH/formatting-sd-(windows).txt b/_pages/th_TH/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/th_TH/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/th_TH/get-started-(new-3ds).txt b/_pages/th_TH/get-started-(new-3ds).txt index a356bbb8ee..65bd5f0197 100644 --- a/_pages/th_TH/get-started-(new-3ds).txt +++ b/_pages/th_TH/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/th_TH/get-started-(old-3ds).txt b/_pages/th_TH/get-started-(old-3ds).txt index 8fc9ad47a9..2dbfd6b915 100644 --- a/_pages/th_TH/get-started-(old-3ds).txt +++ b/_pages/th_TH/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/th_TH/get-started.txt b/_pages/th_TH/get-started.txt index 824816730c..a7240e762e 100644 --- a/_pages/th_TH/get-started.txt +++ b/_pages/th_TH/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/th_TH/godmode9-usage.txt b/_pages/th_TH/godmode9-usage.txt index 99014ce114..cd139f0548 100644 --- a/_pages/th_TH/godmode9-usage.txt +++ b/_pages/th_TH/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/th_TH/home.txt b/_pages/th_TH/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/th_TH/home.txt +++ b/_pages/th_TH/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt b/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/th_TH/homebrew-launcher-(pichaxx).txt b/_pages/th_TH/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/th_TH/homebrew-launcher-(pichaxx).txt +++ b/_pages/th_TH/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/th_TH/homebrew-launcher-(soundhax).txt b/_pages/th_TH/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/th_TH/homebrew-launcher-(soundhax).txt +++ b/_pages/th_TH/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/th_TH/homebrew-launcher-(steelhax).txt b/_pages/th_TH/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/th_TH/homebrew-launcher-(steelhax).txt +++ b/_pages/th_TH/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/th_TH/installing-boot9strap-(browser).txt b/_pages/th_TH/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/th_TH/installing-boot9strap-(browser).txt +++ b/_pages/th_TH/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/th_TH/installing-boot9strap-(fredtool).txt b/_pages/th_TH/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/th_TH/installing-boot9strap-(fredtool).txt +++ b/_pages/th_TH/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/th_TH/installing-boot9strap-(frogtool).txt b/_pages/th_TH/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/th_TH/installing-boot9strap-(frogtool).txt +++ b/_pages/th_TH/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/th_TH/installing-boot9strap-(hardmod).txt b/_pages/th_TH/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/th_TH/installing-boot9strap-(hardmod).txt +++ b/_pages/th_TH/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt +++ b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/th_TH/installing-boot9strap-(ntrboot).txt b/_pages/th_TH/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/th_TH/installing-boot9strap-(ntrboot).txt +++ b/_pages/th_TH/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/th_TH/installing-boot9strap-(pichaxx).txt b/_pages/th_TH/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/th_TH/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/th_TH/installing-boot9strap-(safecerthax).txt b/_pages/th_TH/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/th_TH/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/th_TH/installing-boot9strap-(soundhax).txt b/_pages/th_TH/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/th_TH/installing-boot9strap-(soundhax).txt +++ b/_pages/th_TH/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/th_TH/installing-boot9strap-(ssloth-browser).txt b/_pages/th_TH/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/th_TH/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/th_TH/installing-boot9strap-(usm).txt b/_pages/th_TH/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/th_TH/installing-boot9strap-(usm).txt +++ b/_pages/th_TH/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/th_TH/legacy-methods.txt b/_pages/th_TH/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/th_TH/legacy-methods.txt +++ b/_pages/th_TH/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/th_TH/ntrboot.txt b/_pages/th_TH/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/th_TH/ntrboot.txt +++ b/_pages/th_TH/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/th_TH/region-changing.txt b/_pages/th_TH/region-changing.txt index 75af6091cf..595af43745 100644 --- a/_pages/th_TH/region-changing.txt +++ b/_pages/th_TH/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/th_TH/restoring-cfw.txt b/_pages/th_TH/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/th_TH/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/th_TH/seedminer.txt b/_pages/th_TH/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/th_TH/seedminer.txt +++ b/_pages/th_TH/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/th_TH/site-navigation.txt b/_pages/th_TH/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/th_TH/site-navigation.txt +++ b/_pages/th_TH/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/th_TH/updating-b9s.txt b/_pages/th_TH/updating-b9s.txt index 84d8eb17f1..7bc0a5a605 100644 --- a/_pages/th_TH/updating-b9s.txt +++ b/_pages/th_TH/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/tr_TR/a9lh-to-b9s.txt b/_pages/tr_TR/a9lh-to-b9s.txt index e00bfa415c..fb8de9b383 100644 --- a/_pages/tr_TR/a9lh-to-b9s.txt +++ b/_pages/tr_TR/a9lh-to-b9s.txt @@ -1,38 +1,22 @@ --- -title: "A9LH to B9S" +title: "A9LH'den B9S'e" --- {% include toc title = "İçindekiler"%} ### Okumanız Gerekli -This page is for existing arm9loaderhax users to update their devices to boot9strap. +Bu sayfa mevcut arm9loaderhax kullanıcılarının cihazlarını boot9strap'a güncellemesi içindir. -All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation. +Luma3DS'in gelecekteki tüm versiyonları '.firm' formatında olacak, yani sadece bootstrap9 ve sighax ile uyumlu olacaklar. Bu demek oluyor ki; Luma3DS'in gelecekteki güncellemelerini yükleyebilmek için, bu sayfayı kullanarak yüklemenizi güncellemeniz gerekli. Bu sayfadaki [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linklerini kullanabilmek için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi bir torrent programına ihtiyacınız olacak. -To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). +Bu sayfadaki `.7z` dosyalarını çıkartabilmek için, [7-Zip](http://www.7-zip.org/) veya [The Unarchiver](https://theunarchiver.com/) gibi bir dosya arşivleyici programa ihtiyacınız olacak. -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Cihazınızı kapatın 1. SD kartınızı bilgisayarınıza takın -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -71,24 +53,24 @@ For all steps in this section, overwrite any existing files on your SD card. 1. SD kartınızı cihazınıza tekrar takın -#### Section II - Installing boot9strap +#### Bölüm II - boot9strap kurulumu -1. Boot your device while holding (Start) to launch SafeB9SInstaller - + If you see the luma configuration screen instead of SafeB9SInstaller, simply press (Start), then shutdown your 3DS and try again - + If this gives you an error, try either using a new SD card, or formatting your current SD card (backup existing files first) -1. Wait for all safety checks to complete - + If you get an "OTP Crypto Fail" error, download - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce), then put it in the `/boot9strap/` folder on your SD card and try again -1. When prompted, input the key combo given to install boot9strap -1. Once it has completed, press (A) to reboot your device. - + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card +1. SafeB9SInstaller'ı başlatmak için (Start) düğmesini basılı tutarak cihazınızı açın + Eğer SafeB9SInstaller ekranı yerine luma ayar ekranı görüyorsanız, (Start) butonuna basın ve ardından 3DS'inizi kapatıp tekrar deneyin + +Eğer bu bir hataya neden oluyorsa, yeni bir SD kartla tekrar deneyin ya da var olan SD kartınızı (önce içindeki dosyaları yedekleyip) tekrar biçimlendirin +1. Tüm güvenlik denetimlerinin bitmesini bekleyin + + Eğer "OTP Crypto Fail" hata mesajını alıyorsanız şu dosyayı indirin: - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce), daha sonra bu dosyayı hafıza kartınızdaki `/boot9strap/` klasörünün içine koyun ve yeniden deneyin +1. İstandiğinde boot9strap için verilen anahtarı girin +1. Tamamlandığında, (A) ya basarak 3DSinizi yeniden başlatın. + + Eğer cihazınız açılıs sırasında kapanıyorsa, hafıza kartınızın kök dizinine Luma3DS `.zip` arşivinde bulunan `boot.firm` dosyasını kopyaladığınıza emin olun -#### Section III - Configuring Luma3DS +#### Bölüm III - Luma3DS'in yapılandırılması -1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following: +1. Luma3DS yapılandırma menüsünde, (A) tuşu ve D-Pad kullanarak şunları yapın: + **"Show NAND or user string in System Settings"** 1. Kaydedip yeniden başlatmak için (Start) basın ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/bannerbomb3.txt b/_pages/tr_TR/bannerbomb3.txt index 9c4ece9432..9d0170a4ab 100644 --- a/_pages/tr_TR/bannerbomb3.txt +++ b/_pages/tr_TR/bannerbomb3.txt @@ -4,9 +4,12 @@ title: "BannerBomb3" {% include toc title = "İçindekiler"%} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Okumanız Gerekli -To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. +Sistem DSiWare dosyasını çıkartabilmek için Settings (Ayarlar) uygulamasında bulunan DSiWare Data Management (DSiWare Veri Yönetimi) kısmındaki bir açıktan yararlanıyoruz. To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to dump the DSi Internet Settings application to the SD root. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/tr_TR/checking-for-cfw.txt b/_pages/tr_TR/checking-for-cfw.txt new file mode 100644 index 0000000000..8c8beb3da6 --- /dev/null +++ b/_pages/tr_TR/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/tr_TR/credits.txt b/_pages/tr_TR/credits.txt index 4c62dc494b..cbeb3ec3be 100644 --- a/_pages/tr_TR/credits.txt +++ b/_pages/tr_TR/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Tüm [Freenode'da #Cakey](http://webchat.freenode.net/?channels=%23Cakey)'dekilere emekleri için teşekkürler!** {: .notice--primary} @@ -22,7 +25,7 @@ Eğer isminizi unuttuysam, benimle iletişime geçin ve isminiyi ekleyeyim. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ Eğer isminizi unuttuysam, benimle iletişime geçin ve isminiyi ekleyeyim. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ Eğer isminizi unuttuysam, benimle iletişime geçin ve isminiyi ekleyeyim. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/tr_TR/ctrtransfer.txt b/_pages/tr_TR/ctrtransfer.txt index 2cf0f177cb..a377f521bb 100644 --- a/_pages/tr_TR/ctrtransfer.txt +++ b/_pages/tr_TR/ctrtransfer.txt @@ -119,5 +119,5 @@ If script found no user tickets told you to skip this section, then skip this se ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/dsidumper.txt b/_pages/tr_TR/dsidumper.txt index deffe152c6..9762798a6c 100644 --- a/_pages/tr_TR/dsidumper.txt +++ b/_pages/tr_TR/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title = "İçindekiler"%} - -### Okumanız Gerekli - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Cihazınızı kapatın -1. SD kartınızı bilgisayarınıza takın -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. SD kartınızı cihazınıza tekrar takın -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/tr_TR/faq.txt b/_pages/tr_TR/faq.txt index a3869bc7b2..b8baa6cfd1 100644 --- a/_pages/tr_TR/faq.txt +++ b/_pages/tr_TR/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **S:** *Luma3DS'i nasıl yükseltebilirim?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **C:** Hayır. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/tr_TR/finalizing-setup.txt b/_pages/tr_TR/finalizing-setup.txt index 3baa0e3dea..f88067ef77 100644 --- a/_pages/tr_TR/finalizing-setup.txt +++ b/_pages/tr_TR/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -Biz bu rehberde, AuroraWright'ın Luma3DS [AuroraWright](https://github.com/AuroraWright/) kullanacağız, bu sayede EmuNAND ile alakalı bir işlem yapmamıza gerek kalmayacak ve işi basitleştirip SD kart hafızasında da daha az yer kaplayacak. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz: + **FBI** *(CIA formatlı oyunları ve uygulamaları kurar)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(Custom Firmware yüklemenizi kolayca günceller)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz: 1. Cihazınızı kapatın 1. SD kartınızı bilgisayarınıza takın 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. SD kartınızın ana dizininde eğer yoksa `cias` isminde klasör oluşturun 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Cihazınızı kapatın -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -Artık Luma3DS'i güncellemek için tek yapmanız gereken Luma3DS Updater'i açıp (A)'ya basıp güncelle demektir. - -Bu bir Sistem Güncellemesi ile aynı şey değildir; sadece en yeni Luma3DS dosyalarını indirir ve çıkarır. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. Luma3DS yapılandırma menüsünü başlatmak için önyüklemede (Select) tuşunu basılı tutabilirsiniz. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us Luma3DS'in çeşitli özelliklerini kullanmak için, yazılımın [wiki sayfasına](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) bakın. {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/tr_TR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/tr_TR/flashing-ntrboot-(3ds-multi-system).txt index f15121f3b2..da4a143b65 100644 --- a/_pages/tr_TR/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/tr_TR/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt b/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt index 00908ec730..7d2109feb0 100644 --- a/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/tr_TR/flashing-ntrboot-(nds).txt b/_pages/tr_TR/flashing-ntrboot-(nds).txt index 3a9375925a..3e60a6fc19 100644 --- a/_pages/tr_TR/flashing-ntrboot-(nds).txt +++ b/_pages/tr_TR/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/tr_TR/formatting-sd-(linux).txt b/_pages/tr_TR/formatting-sd-(linux).txt new file mode 100644 index 0000000000..d0b1647010 --- /dev/null +++ b/_pages/tr_TR/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Bu sayfa yalnızca Linux kullanıcıları içindir. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/tr_TR/formatting-sd-(mac).txt b/_pages/tr_TR/formatting-sd-(mac).txt new file mode 100644 index 0000000000..313a41b082 --- /dev/null +++ b/_pages/tr_TR/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Bu sayfa yalnızca Mac kullanıcılar içindir. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. SD kartınızı bilgisayarınıza takın +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. SD kartınızı bilgisayarınıza takın +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/tr_TR/formatting-sd-(windows).txt b/_pages/tr_TR/formatting-sd-(windows).txt new file mode 100644 index 0000000000..6a279a232b --- /dev/null +++ b/_pages/tr_TR/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +Bu sayfa yalnızca Windows kullanıcıları içindir. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. SD kartınızı bilgisayarınıza takın +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/tr_TR/get-started-(new-3ds).txt b/_pages/tr_TR/get-started-(new-3ds).txt index af3a4d1780..d075d4a951 100644 --- a/_pages/tr_TR/get-started-(new-3ds).txt +++ b/_pages/tr_TR/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Okumanız Gerekli -Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin. Note that the "from" and "to" fields are inclusive. Bu şu anlama gelir,örneğin, "9.0.0 'dan 9.2.0 ye kadar" sırasına 9.0.0, 9.1.0, ve 9.2.0 dahildir. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin. Note that the "from" and "to" fields are inclusive. Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında görülebilir. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromTo-dan-e kadarAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/tr_TR/get-started-(old-3ds).txt b/_pages/tr_TR/get-started-(old-3ds).txt index 19461c51b9..0f26168814 100644 --- a/_pages/tr_TR/get-started-(old-3ds).txt +++ b/_pages/tr_TR/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Okumanız Gerekli -Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin. Note that the "from" and "to" fields are inclusive. Bu şu anlama gelir,örneğin, "9.0.0 'dan 9.2.0 ye kadar" sırasına 9.0.0, 9.1.0, ve 9.2.0 dahildir. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Eğer versiyon numaranız -0 ise tarayıcınız yoktur, -0 dışındaki her hangi bir numaraya sahipseniz tarayıcınız yüklüdür. - -Örneğin "5.0.0-0U" söz konusu olduğunda, "Tarayıcı yok" sütununu ve 5.0.0'dan 5.1.0'a kadar seçeneğini seçerek devam edilmesi gerekir. Çünkü sistem o versiyon aralığında ve tarayıcı yüklü değil. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin. Note that the "from" and "to" fields are inclusive. Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında görülebilir. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında gör - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
-dan -e kadarTarayıcı YokTarayıcı VarAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/tr_TR/get-started.txt b/_pages/tr_TR/get-started.txt index 44bf04fbe7..94bc7b33f4 100644 --- a/_pages/tr_TR/get-started.txt +++ b/_pages/tr_TR/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Okumanız Gerekli -Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin. Note that the "from" and "to" fields are inclusive. Bu şu anlama gelir,örneğin, "9.0.0 'dan 9.2.0 ye kadar" sırasına 9.0.0, 9.1.0, ve 9.2.0 dahildir. - -Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında görülebilir. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Eğer daha önceden 3DS cihazınızı hacklediyseniz ve EmuNAND tabanlı CFW yüklediyseniz, SysNAND bölümündeki adımları takip ediniz. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Başlamadan önce, SD kartınızı hatalara karşı kontrol edebilirsiniz. [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), ya da [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-dan-e kadarAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/tr_TR/godmode9-usage.txt b/_pages/tr_TR/godmode9-usage.txt index e41515e73b..cafacc9711 100644 --- a/_pages/tr_TR/godmode9-usage.txt +++ b/_pages/tr_TR/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title = "İçindekiler"%} -Hem GodMode9 hem de script yazımında (İngilizce) destek almak için ve güncellemeler vb. bilgi elde etmek için [GodMode9 Discord](https://discord.gg/EGu6Qxw)'unu ziyaret edin. +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Okumanız Gerekli diff --git a/_pages/tr_TR/home.txt b/_pages/tr_TR/home.txt index 35a6bdb92b..5210ca3b35 100644 --- a/_pages/tr_TR/home.txt +++ b/_pages/tr_TR/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## Custom firmware ile ne yapabilirim? + Bölge kilidi olmadan bütün oyun kartuşları ve eShop oyunlarını oynayın -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Sahip olduğunuz oyunlar ile "ROM hack"ler kullanın + Ekran görüntüsü çekin Birçok oyun için yedekleme, düzenleme ve geri yükleme @@ -78,11 +78,11 @@ Birçok oyun için yedekleme, düzenleme ve geri yükleme + **Rehbere başlamadan önce, hack işlemlerinin riskli olduğunu bilmeniz gerekir: Sistemi HER modifiye edişinizde KURTARILAMAZ bir brick oluşma ihtimali vardır. Bunlar çok nadirdir fakat oluşma şansı vardır, bundan dolayı rehberin her adımını BİREBİR takip etmeniz gerekir.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + Her şey plana uygun giderse hiçbir veri kaybetmeden başlangıçta sahip olduğunuz her şeyi koruyacaksınız (oyunlar, NNID, save dosyaları vs. korunacak). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + SD kartınız [GPT değil MBR](http://www.howtogeek.com/245610/) olmalıdır.(Cihaz içinde gelen SD kart varsayılan olarak MBR'dir). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/tr_TR/homebrew-launcher-(alternatives).txt b/_pages/tr_TR/homebrew-launcher-(alternatives).txt index 7575fad816..58c0b811e1 100644 --- a/_pages/tr_TR/homebrew-launcher-(alternatives).txt +++ b/_pages/tr_TR/homebrew-launcher-(alternatives).txt @@ -14,7 +14,7 @@ If browserhax is not an option (see the chart below), you do not already own any Ensure your device's Wireless Communication is turned on as udsploit (used in the next page) will need the wireless module to be active to function, and some devices (New 3DS, New 2DS, and Old 2DS) cannot adjust the Wireless Communication setting from the Homebrew Launcher. Wireless Communication only has to be on; connecting it to an access point is not required. -To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). +Bu sayfadaki `.7z` dosyalarını çıkartabilmek için, [7-Zip](http://www.7-zip.org/) veya [The Unarchiver](https://theunarchiver.com/) gibi bir dosya arşivleyici programa ihtiyacınız olacak. ### What You Need diff --git a/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt b/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt index b5d1333d17..487f25a45c 100644 --- a/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title = "İçindekiler"%} - -### Okumanız Gerekli - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/tr_TR/homebrew-launcher-(pichaxx).txt b/_pages/tr_TR/homebrew-launcher-(pichaxx).txt index 6a70e81b6d..094573d677 100644 --- a/_pages/tr_TR/homebrew-launcher-(pichaxx).txt +++ b/_pages/tr_TR/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title = "İçindekiler"%} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Okumanız Gerekli This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Cihazınızı kapatın ___ diff --git a/_pages/tr_TR/homebrew-launcher-(soundhax).txt b/_pages/tr_TR/homebrew-launcher-(soundhax).txt index 48bc0ddbc5..b6ef193191 100644 --- a/_pages/tr_TR/homebrew-launcher-(soundhax).txt +++ b/_pages/tr_TR/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Homebrew'ı çalıştırmak için [alternatif bir yöntem](homebrew-launcher-(alternatives)) gerekir! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! Homebrew'ı çalıştırmak için [alternatif bir yöntem](homebrew-launcher-(alternatives)) gerekir! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/tr_TR/homebrew-launcher-(steelhax).txt b/_pages/tr_TR/homebrew-launcher-(steelhax).txt index 6842b69017..65ec1b9a69 100644 --- a/_pages/tr_TR/homebrew-launcher-(steelhax).txt +++ b/_pages/tr_TR/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title = "İçindekiler"%} - -### Okumanız Gerekli - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Cihazınızı kapatın -1. SD kartınızı bilgisayarınıza takın -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. SD kartınızı cihazınıza tekrar takın -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(2xrsa).txt b/_pages/tr_TR/installing-boot9strap-(2xrsa).txt index 9599b210ad..f4bf031f40 100644 --- a/_pages/tr_TR/installing-boot9strap-(2xrsa).txt +++ b/_pages/tr_TR/installing-boot9strap-(2xrsa).txt @@ -54,5 +54,5 @@ title: "Installing boot9strap (2xrsa)" ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(browser).txt b/_pages/tr_TR/installing-boot9strap-(browser).txt index 012961a361..477e218427 100644 --- a/_pages/tr_TR/installing-boot9strap-(browser).txt +++ b/_pages/tr_TR/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title = "İçindekiler"%} +### Okumanız Gerekli + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Cihazınızı kapatın 1. SD kartınızı bilgisayarınıza takın +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,9 +55,8 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Kaydedip yeniden başlatmak için (Start) basın - + If you get an error, just continue the next page ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(fredtool).txt b/_pages/tr_TR/installing-boot9strap-(fredtool).txt index fe61cd9a57..8c01262cdf 100644 --- a/_pages/tr_TR/installing-boot9strap-(fredtool).txt +++ b/_pages/tr_TR/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title = "İçindekiler"%} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Okumanız Gerekli This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Cihazınızı kapatın 1. SD kartınızı bilgisayarınıza takın -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device @@ -98,5 +101,5 @@ If you would prefer a visual guide to this section, one is available [here](http ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(frogtool).txt b/_pages/tr_TR/installing-boot9strap-(frogtool).txt index 119e43a9b6..6b2d09d7c3 100644 --- a/_pages/tr_TR/installing-boot9strap-(frogtool).txt +++ b/_pages/tr_TR/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title = "İçindekiler"%} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Okumanız Gerekli We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ Bu sayfadaki [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linklerini k * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. SD kartınızı bilgisayarınıza takın 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. SD kartınızı cihazınıza tekrar takın @@ -74,7 +77,27 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Kaydedip yeniden başlatmak için (Start) basın + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(hardmod).txt b/_pages/tr_TR/installing-boot9strap-(hardmod).txt index 9ecea6f6cf..0d95dbf456 100644 --- a/_pages/tr_TR/installing-boot9strap-(hardmod).txt +++ b/_pages/tr_TR/installing-boot9strap-(hardmod).txt @@ -12,7 +12,7 @@ This is a currently working implementation of the "FIRM partitions known-plainte Bu sayfadaki [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linklerini kullanabilmek için [Deluge](http://dev.deluge-torrent.org/wiki/Download) gibi bir torrent programına ihtiyacınız olacak. -To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). +Bu sayfadaki `.7z` dosyalarını çıkartabilmek için, [7-Zip](http://www.7-zip.org/) veya [The Unarchiver](https://theunarchiver.com/) gibi bir dosya arşivleyici programa ihtiyacınız olacak. This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that you have a corresponding `.firm` for. @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | @@ -71,7 +71,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that 1. Use your hardmod to create a NAND backup 1. Move your NAND backup to the hardmod-b9s-installer folder on your computer and rename it to `NAND.bin` -#### Section II - Installing boot9strap +#### Bölüm II - boot9strap kurulumu 1. Run hardmod-b9s-installer + Windows Users: Run `install-b9s.exe` @@ -81,7 +81,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that 1. Disconnect your hardmod 1. Power on your device -#### Section III - Configuring Luma3DS +#### Bölüm III - Luma3DS'in yapılandırılması 1. Your device should have booted into the Luma3DS configuration menu + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) @@ -92,5 +92,5 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt index 2f63952bbc..a42d09cecd 100644 --- a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt +++ b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title = "İçindekiler"%} - -### Okumanız Gerekli - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Kaydedip yeniden başlatmak için (Start) basın - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/tr_TR/installing-boot9strap-(mset).txt b/_pages/tr_TR/installing-boot9strap-(mset).txt index 02fc7de7dc..8f9e6c159f 100644 --- a/_pages/tr_TR/installing-boot9strap-(mset).txt +++ b/_pages/tr_TR/installing-boot9strap-(mset).txt @@ -56,5 +56,5 @@ title: "Installing boot9strap (MSET)" ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt index 2f61609805..a5ea10d368 100644 --- a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt +++ b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ Bu sayfadaki [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linklerini k * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Cihazınızı kapatın -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. SD kartınızı cihazınıza tekrar takın +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot @@ -71,7 +71,7 @@ Bu sayfadaki [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linklerini k ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} ___ diff --git a/_pages/tr_TR/installing-boot9strap-(pichaxx).txt b/_pages/tr_TR/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..1b7ef57883 --- /dev/null +++ b/_pages/tr_TR/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title = "İçindekiler"%} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Okumanız Gerekli + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Cihazınızı kapatın +1. SD kartınızı bilgisayarınıza takın +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. SD kartınızı cihazınıza tekrar takın +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Kaydedip yeniden başlatmak için (Start) basın + + If you get an error, just continue the next page + +___ + +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin +{: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(safeb9sinstaller).txt b/_pages/tr_TR/installing-boot9strap-(safeb9sinstaller).txt index d094fceb5b..4d7facc0d9 100644 --- a/_pages/tr_TR/installing-boot9strap-(safeb9sinstaller).txt +++ b/_pages/tr_TR/installing-boot9strap-(safeb9sinstaller).txt @@ -18,13 +18,13 @@ title: "Installing boot9strap (SafeB9SInstaller)" + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin 1. If the exploit was successful, you will have booted into SafeB9SInstaller -#### Section II - Installing boot9strap +#### Bölüm II - boot9strap kurulumu 1. Wait for all safety checks to complete 1. When prompted, input the key combo given to install boot9strap 1. Once it has completed, press (A) to reboot your device -#### Section III - Configuring Luma3DS +#### Bölüm III - Luma3DS'in yapılandırılması 1. Your device should have rebooted into the Luma3DS configuration menu + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) @@ -35,5 +35,5 @@ title: "Installing boot9strap (SafeB9SInstaller)" ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} \ No newline at end of file diff --git a/_pages/tr_TR/installing-boot9strap-(safecerthax).txt b/_pages/tr_TR/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..e6d8cb94b3 --- /dev/null +++ b/_pages/tr_TR/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Cihazınızı kapatın +1. SD kartınızı bilgisayarınıza takın +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. SD kartınızı cihazınıza tekrar takın +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Cihazınızı kapatın + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Kaydedip yeniden başlatmak için (Start) basın + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Cihazınızı kapatın + +___ + +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin +{: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(soundhax).txt b/_pages/tr_TR/installing-boot9strap-(soundhax).txt index 23508e425c..a7c80ec39a 100644 --- a/_pages/tr_TR/installing-boot9strap-(soundhax).txt +++ b/_pages/tr_TR/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Okumanız Gerekli -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Cihazınızı kapatın 1. SD kartınızı bilgisayarınıza takın 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. `/SDCARD` gidin, "<3 nedwill 2016" dosyasını oynatın + Bir kaç kere denemeniz gerekebilir - + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} @@ -79,5 +69,5 @@ This means that using a cartridge update from a version containing an older Nint ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/installing-boot9strap-(ssloth-browser).txt b/_pages/tr_TR/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..c98a133435 --- /dev/null +++ b/_pages/tr_TR/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Cihazınızı kapatın +1. SD kartınızı bilgisayarınıza takın +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. SD kartınızı cihazınıza tekrar takın +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Cihazınızı kapatın + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Kaydedip yeniden başlatmak için (Start) basın + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Cihazınızı kapatın + +___ + +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin +{: .notice--primary} + + diff --git a/_pages/tr_TR/installing-boot9strap-(usm).txt b/_pages/tr_TR/installing-boot9strap-(usm).txt index 46b46843ff..14ad59613c 100644 --- a/_pages/tr_TR/installing-boot9strap-(usm).txt +++ b/_pages/tr_TR/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title = "İçindekiler"%} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Okumanız Gerekli In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. SD kartınızı bilgisayarınıza takın 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,14 +84,12 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Cihazınızı kapatın 1. SD kartınızı bilgisayarınıza takın -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/tr_TR/legacy-methods.txt b/_pages/tr_TR/legacy-methods.txt index 7c96b800ab..6aad2aaee0 100644 --- a/_pages/tr_TR/legacy-methods.txt +++ b/_pages/tr_TR/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/tr_TR/ntrboot.txt b/_pages/tr_TR/ntrboot.txt index 58604e05bb..8209255387 100644 --- a/_pages/tr_TR/ntrboot.txt +++ b/_pages/tr_TR/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/tr_TR/region-changing.txt b/_pages/tr_TR/region-changing.txt index 864a2dbc5c..79f8ffd21f 100644 --- a/_pages/tr_TR/region-changing.txt +++ b/_pages/tr_TR/region-changing.txt @@ -17,7 +17,7 @@ SD Kartınızdaki '/luma/payloads/' klasöründe 'Godmode9.firm' dışında bir Bu işlem, NNID'nizin sistemle olan bağlantısını kaldıracaktır, çünkü artık uyumlu olmayacaktır. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Orijinal regionda eShop'a erişmiş New 3DS'ler için yeni bir NNID oluşturamaz ve yeni bölgede eShop'a erişemez! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Bazen eShop'un açıklanamaz şekilde çalışması gereken aygıtlar için hala çalışmayabileceğini unutmayın. Bu tamamen Nintendo serverları ile alakalıdır ve benim kontrolümde olan bir durum değil. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). Neden olduğu şu an için bilinmiyor. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. SD kartınızı cihazınıza tekrar takın -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Onaylamak için (A) basın + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Devam etmek için (A) basın +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. SD kartınızı çıkarmak için aynı anda (R) ve (B) ye basın ve basılı tutun +1. SD kartınızı bilgisayarınıza takın +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. SD kartınızı cihazınıza tekrar takın + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + Bu bir hata verirse, DNS ayarlarınızı "otomatik" olarak belirleyin -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. "Other Settings" gidin, sonra "Profile" ve en son "Region Settings" gidin 1. Seçtiğiniz region'a uygun bir ülke seçin 1. İstenirse şehir seçin -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/tr_TR/restoring-cfw.txt b/_pages/tr_TR/restoring-cfw.txt new file mode 100644 index 0000000000..ac8b544924 --- /dev/null +++ b/_pages/tr_TR/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title = "İçindekiler"%} + +### Okumanız Gerekli + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. SD kartınızı bilgisayarınıza takın +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. SD kartınızı cihazınıza tekrar takın + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Kaydedip yeniden başlatmak için (Start) basın + +___ + +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin +{: .notice--primary} \ No newline at end of file diff --git a/_pages/tr_TR/seedminer.txt b/_pages/tr_TR/seedminer.txt index c2ced49410..1c80fb2019 100644 --- a/_pages/tr_TR/seedminer.txt +++ b/_pages/tr_TR/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title = "İçindekiler"%} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Okumanız Gerekli -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. SD kartınızı bilgisayarınıza takın 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/tr_TR/site-navigation.txt b/_pages/tr_TR/site-navigation.txt index d01b8b9f31..95e9edeaca 100644 --- a/_pages/tr_TR/site-navigation.txt +++ b/_pages/tr_TR/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popüler** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Başlarken](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatifler)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [EmuNAND' Taşıma](move-emunand) + [ntrboot](ntrboot) + [Bölge Değiştirme](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/tr_TR/updating-b9s.txt b/_pages/tr_TR/updating-b9s.txt index 06d8faca97..e02dd42a32 100644 --- a/_pages/tr_TR/updating-b9s.txt +++ b/_pages/tr_TR/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,13 +25,12 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. SD kartınızı bilgisayarınıza takın -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card 1. SD kartınızı cihazınıza tekrar takın -#### Section II - Installing boot9strap +#### Bölüm II - boot9strap kurulumu 1. Launch Luma3DS chainloader menu by holding (Start) during boot 1. Launch SafeB9SInstaller by pressing (A) @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Cihazınızı kapatın 1. SD kartınızı bilgisayarınıza takın -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. SD kartınızı cihazınıza tekrar takın 1. Power on your device @@ -67,11 +52,11 @@ For all steps in this section, overwrite any existing files on your SD card. This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot. {: .notice--info} -1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following: +1. Luma3DS yapılandırma menüsünde, (A) tuşu ve D-Pad kullanarak şunları yapın: + **"Show NAND or user string in System Settings"** 1. Kaydedip yeniden başlatmak için (Start) basın ___ -### Continue to [Finalizing Setup](finalizing-setup) +### [Kurulumu Tamamlamak](finalizing-setup) için devam edin {: .notice--primary} diff --git a/_pages/uk_UA/a9lh-to-b9s.txt b/_pages/uk_UA/a9lh-to-b9s.txt index 60eaed476f..ec52109ad7 100644 --- a/_pages/uk_UA/a9lh-to-b9s.txt +++ b/_pages/uk_UA/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/uk_UA/bannerbomb3.txt b/_pages/uk_UA/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/uk_UA/bannerbomb3.txt +++ b/_pages/uk_UA/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/uk_UA/checking-for-cfw.txt b/_pages/uk_UA/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/uk_UA/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/uk_UA/credits.txt b/_pages/uk_UA/credits.txt index e66f591db9..c30986407b 100644 --- a/_pages/uk_UA/credits.txt +++ b/_pages/uk_UA/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/uk_UA/dsidumper.txt b/_pages/uk_UA/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/uk_UA/dsidumper.txt +++ b/_pages/uk_UA/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/uk_UA/faq.txt b/_pages/uk_UA/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/uk_UA/faq.txt +++ b/_pages/uk_UA/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/uk_UA/finalizing-setup.txt b/_pages/uk_UA/finalizing-setup.txt index 90f49a797f..6f9a26a828 100644 --- a/_pages/uk_UA/finalizing-setup.txt +++ b/_pages/uk_UA/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/uk_UA/flashing-ntrboot-(3ds-multi-system).txt b/_pages/uk_UA/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/uk_UA/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/uk_UA/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt b/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/uk_UA/flashing-ntrboot-(nds).txt b/_pages/uk_UA/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/uk_UA/flashing-ntrboot-(nds).txt +++ b/_pages/uk_UA/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/uk_UA/formatting-sd-(linux).txt b/_pages/uk_UA/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/uk_UA/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/uk_UA/formatting-sd-(mac).txt b/_pages/uk_UA/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/uk_UA/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/uk_UA/formatting-sd-(windows).txt b/_pages/uk_UA/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/uk_UA/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/uk_UA/get-started-(new-3ds).txt b/_pages/uk_UA/get-started-(new-3ds).txt index a356bbb8ee..65bd5f0197 100644 --- a/_pages/uk_UA/get-started-(new-3ds).txt +++ b/_pages/uk_UA/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/uk_UA/get-started-(old-3ds).txt b/_pages/uk_UA/get-started-(old-3ds).txt index 8fc9ad47a9..2dbfd6b915 100644 --- a/_pages/uk_UA/get-started-(old-3ds).txt +++ b/_pages/uk_UA/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/uk_UA/get-started.txt b/_pages/uk_UA/get-started.txt index 824816730c..a7240e762e 100644 --- a/_pages/uk_UA/get-started.txt +++ b/_pages/uk_UA/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/uk_UA/godmode9-usage.txt b/_pages/uk_UA/godmode9-usage.txt index 99014ce114..cd139f0548 100644 --- a/_pages/uk_UA/godmode9-usage.txt +++ b/_pages/uk_UA/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/uk_UA/home.txt b/_pages/uk_UA/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/uk_UA/home.txt +++ b/_pages/uk_UA/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt b/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/uk_UA/homebrew-launcher-(pichaxx).txt b/_pages/uk_UA/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/uk_UA/homebrew-launcher-(pichaxx).txt +++ b/_pages/uk_UA/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/uk_UA/homebrew-launcher-(soundhax).txt b/_pages/uk_UA/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/uk_UA/homebrew-launcher-(soundhax).txt +++ b/_pages/uk_UA/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/uk_UA/homebrew-launcher-(steelhax).txt b/_pages/uk_UA/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/uk_UA/homebrew-launcher-(steelhax).txt +++ b/_pages/uk_UA/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/uk_UA/installing-boot9strap-(browser).txt b/_pages/uk_UA/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/uk_UA/installing-boot9strap-(browser).txt +++ b/_pages/uk_UA/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/uk_UA/installing-boot9strap-(fredtool).txt b/_pages/uk_UA/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/uk_UA/installing-boot9strap-(fredtool).txt +++ b/_pages/uk_UA/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/uk_UA/installing-boot9strap-(frogtool).txt b/_pages/uk_UA/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/uk_UA/installing-boot9strap-(frogtool).txt +++ b/_pages/uk_UA/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/uk_UA/installing-boot9strap-(hardmod).txt b/_pages/uk_UA/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/uk_UA/installing-boot9strap-(hardmod).txt +++ b/_pages/uk_UA/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt +++ b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt +++ b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/uk_UA/installing-boot9strap-(pichaxx).txt b/_pages/uk_UA/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/uk_UA/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/uk_UA/installing-boot9strap-(safecerthax).txt b/_pages/uk_UA/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/uk_UA/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/uk_UA/installing-boot9strap-(soundhax).txt b/_pages/uk_UA/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/uk_UA/installing-boot9strap-(soundhax).txt +++ b/_pages/uk_UA/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/uk_UA/installing-boot9strap-(ssloth-browser).txt b/_pages/uk_UA/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/uk_UA/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/uk_UA/installing-boot9strap-(usm).txt b/_pages/uk_UA/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/uk_UA/installing-boot9strap-(usm).txt +++ b/_pages/uk_UA/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/uk_UA/legacy-methods.txt b/_pages/uk_UA/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/uk_UA/legacy-methods.txt +++ b/_pages/uk_UA/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/uk_UA/ntrboot.txt b/_pages/uk_UA/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/uk_UA/ntrboot.txt +++ b/_pages/uk_UA/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/uk_UA/region-changing.txt b/_pages/uk_UA/region-changing.txt index 75af6091cf..595af43745 100644 --- a/_pages/uk_UA/region-changing.txt +++ b/_pages/uk_UA/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/uk_UA/restoring-cfw.txt b/_pages/uk_UA/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/uk_UA/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/uk_UA/seedminer.txt b/_pages/uk_UA/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/uk_UA/seedminer.txt +++ b/_pages/uk_UA/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/uk_UA/site-navigation.txt b/_pages/uk_UA/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/uk_UA/site-navigation.txt +++ b/_pages/uk_UA/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/uk_UA/updating-b9s.txt b/_pages/uk_UA/updating-b9s.txt index 84d8eb17f1..7bc0a5a605 100644 --- a/_pages/uk_UA/updating-b9s.txt +++ b/_pages/uk_UA/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/vi_VN/a9lh-to-b9s.txt b/_pages/vi_VN/a9lh-to-b9s.txt index 60eaed476f..ec52109ad7 100644 --- a/_pages/vi_VN/a9lh-to-b9s.txt +++ b/_pages/vi_VN/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this To extract the `.7z` files linked on this page, you will need a file archiver like [7-Zip](http://www.7-zip.org/) or [The Unarchiver](https://theunarchiver.com/). -If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Crypto Fail" error unless you temporarily disable your PIN (you can re-enable the PIN after the update). +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### What You Need Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below. @@ -42,11 +26,10 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load {: .notice--info} * - **New 3DS Users Only:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The v7.0.5 release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### Instructions @@ -57,8 +40,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card -1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. Copy `arm9loaderhax.bin` from the v7.0.5 Luma3DS `.7z` to the root of your SD card 1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions 1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card diff --git a/_pages/vi_VN/bannerbomb3.txt b/_pages/vi_VN/bannerbomb3.txt index 590a26735e..f45d99b097 100644 --- a/_pages/vi_VN/bannerbomb3.txt +++ b/_pages/vi_VN/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application. @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * Your `movable.sed` file from completing [Seedminer](seedminer) #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/vi_VN/checking-for-cfw.txt b/_pages/vi_VN/checking-for-cfw.txt new file mode 100644 index 0000000000..b110caf083 --- /dev/null +++ b/_pages/vi_VN/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### Instructions + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/vi_VN/credits.txt b/_pages/vi_VN/credits.txt index e66f591db9..c30986407b 100644 --- a/_pages/vi_VN/credits.txt +++ b/_pages/vi_VN/credits.txt @@ -2,6 +2,9 @@ title: "Credits" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** {: .notice--primary} @@ -22,7 +25,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ If I forgot you here, contact me and I'll add your name. + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ If I forgot you here, contact me and I'll add your name. + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/vi_VN/dsidumper.txt b/_pages/vi_VN/dsidumper.txt index 034e18f5cc..9762798a6c 100644 --- a/_pages/vi_VN/dsidumper.txt +++ b/_pages/vi_VN/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### What You Need - -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### Section I - Prep Work - -1. Power off your device -1. Insert your SD card into your computer -1. Copy your `movable.sed` file to the root of your SD card -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. Reinsert your SD card into your device -1. Power on your device - -#### Section II - DSiWare Dumping - -1. Open the Homebrew Launcher using any method -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -Continue to [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/vi_VN/faq.txt b/_pages/vi_VN/faq.txt index eb00412965..17654fc293 100644 --- a/_pages/vi_VN/faq.txt +++ b/_pages/vi_VN/faq.txt @@ -6,7 +6,7 @@ title: "FAQ" **A:** Yes **Q:** *How do I update Luma3DS?* -**A:** Use [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc). Is that something I need?* **A:** No. boot9strap is a superior method of loading hax that runs early in boot. diff --git a/_pages/vi_VN/finalizing-setup.txt b/_pages/vi_VN/finalizing-setup.txt index 90f49a797f..6f9a26a828 100644 --- a/_pages/vi_VN/finalizing-setup.txt +++ b/_pages/vi_VN/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "Finalizing Setup" The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. During this process, we also setup programs such as the following: + **FBI** *(installs CIA formatted games and applications)* + **Anemone3DS** *(installs custom themes)* + **Checkpoint** *(backs up and restores save files for 3DS and DS games)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)* + **Homebrew Launcher Loader** *(launches the Homebrew Launcher)* + **DSP1** *(allows homebrew applications to have sound)* @@ -25,12 +25,12 @@ During this process, we also setup programs such as the following: * The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)* * The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)* * The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(the `.cia` file)* ### Instructions @@ -39,15 +39,16 @@ During this process, we also setup programs such as the following: 1. Power off your device 1. Insert your SD card into your computer 1. Create a folder named `3ds` on the root of your SD card if it does not already exist + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. Create a folder named `cias` on the root of your SD card if it does not already exist 1. Copy `ctr-no-timeoffset.3dsx` to the `/3ds/` folder on your SD card 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Copy `Homebrew_Launcher.cia` to the `/cias/` folder on your SD card -1. Copy `lumaupdater.cia` to the `/cias/` folder on your SD card 1. Copy `FBI.cia` to the `/cias/` folder on your SD card 1. Copy `DSP1.cia` to the `/cias/` folder on your SD card 1. Copy `Anemone3DS.cia` to the `/cias/` folder on your SD card 1. Copy `Checkpoint.cia` to the `/cias/` folder on your SD card +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. Create a folder named `payloads` in the `luma` folder on your SD card if it does not already exist 1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card 1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card @@ -102,7 +103,7 @@ If, before following this guide, you already had an EmuNAND setup and would like #### Section VI - CTRNAND Luma3DS 1. Power off your device -1. Launch GodMode9 by holding (Start) during boot +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue 1. Press (Home) to bring up the action menu @@ -150,18 +151,8 @@ ___ #### Information and Notes -{% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). - -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. - -This will update the Luma3DS files on your SD card and in CTRNAND, which is what your device boots from when there is no SD card present. -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -You will now boot Luma3DS CFW SysNAND by default. +You will now boot Luma3DS CFW by default. You can now hold (Select) on boot to launch the Luma3DS configuration menu. @@ -177,7 +168,7 @@ You can now press (L) + (Down) + (Select) while the system is booted to open the {% capture notice-6 %} If you would like to upgrade to a bigger sized SD card, all you have to do is format your new SD card as FAT32 and copy paste the contents of the old SD card onto the new SD card. -If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) for Windows, [gparted](http://gparted.org/download.php) for Linux, or [Disk Utility](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac) for Mac. +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ For information on using GodMode9's various features, check out the [GodMode9 Us For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.eu/). +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/vi_VN/flashing-ntrboot-(3ds-multi-system).txt b/_pages/vi_VN/flashing-ntrboot-(3ds-multi-system).txt index 7f91344288..939e52ff11 100644 --- a/_pages/vi_VN/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/vi_VN/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two 3DS family devices + **The source 3DS**: the 3DS family device that is already running boot9strap + **The target 3DS**: the device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### Instructions diff --git a/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt b/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt index 9e505b10f2..1982b6b170 100644 --- a/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces ### What You Need * Your ntrboot compatible flashcart -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/vi_VN/flashing-ntrboot-(nds).txt b/_pages/vi_VN/flashing-ntrboot-(nds).txt index f7a331c0eb..3dc807f3c2 100644 --- a/_pages/vi_VN/flashing-ntrboot-(nds).txt +++ b/_pages/vi_VN/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces * Two devices + **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart + **The target 3DS**: the 3DS family device on stock firmware -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * The latest release of [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### Instructions diff --git a/_pages/vi_VN/formatting-sd-(linux).txt b/_pages/vi_VN/formatting-sd-(linux).txt new file mode 100644 index 0000000000..3c1ba25cd5 --- /dev/null +++ b/_pages/vi_VN/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Linux users only. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### Instructions +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/vi_VN/formatting-sd-(mac).txt b/_pages/vi_VN/formatting-sd-(mac).txt new file mode 100644 index 0000000000..c9c0ebf791 --- /dev/null +++ b/_pages/vi_VN/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Mac users only. If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### Instructions + +#### OS X El Capitan (10.11) and later + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/vi_VN/formatting-sd-(windows).txt b/_pages/vi_VN/formatting-sd-(windows).txt new file mode 100644 index 0000000000..fb92106ee4 --- /dev/null +++ b/_pages/vi_VN/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### What You Need + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### Instructions + +1. Insert your SD card into your computer +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/vi_VN/get-started-(new-3ds).txt b/_pages/vi_VN/get-started-(new-3ds).txt index a356bbb8ee..65bd5f0197 100644 --- a/_pages/vi_VN/get-started-(new-3ds).txt +++ b/_pages/vi_VN/get-started-(new-3ds).txt @@ -6,63 +6,49 @@ title: "Get Started (New 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
FromToFromToAction
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.01.0.011.3.0 Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" Method11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
diff --git a/_pages/vi_VN/get-started-(old-3ds).txt b/_pages/vi_VN/get-started-(old-3ds).txt index 8fc9ad47a9..2dbfd6b915 100644 --- a/_pages/vi_VN/get-started-(old-3ds).txt +++ b/_pages/vi_VN/get-started-(old-3ds).txt @@ -6,21 +6,16 @@ title: "Get Started (Old 3DS)" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. - -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. +Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. Your device version can be found at the bottom right of the top screen of the System Settings. ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### Version Table @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
From ToNo BrowserBrowserAction
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
11.4.011.7.0Use an "All Versions" MethodInstalling boot9strap (Soundhax)
11.8.011.8.0Installing boot9strap (DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)
\ No newline at end of file + diff --git a/_pages/vi_VN/get-started.txt b/_pages/vi_VN/get-started.txt index 824816730c..a7240e762e 100644 --- a/_pages/vi_VN/get-started.txt +++ b/_pages/vi_VN/get-started.txt @@ -6,85 +6,16 @@ title: "Get Started" ### Required Reading -Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. - -Your device version can be found at the bottom right of the top screen of the System Settings. - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should either update to the latest version or use the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -If you have already hacked your 3DS before and have an EmuNAND based CFW setup, just follow all instructions while on SysNAND. Replace any files that already exist. Your data will be transferred from EmuNAND to your new B9S install at the end. If you use menuhax, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata) to remove it before beginning. - -This page is for instructions on how to install boot9strap to a *stock* 3DS or 2DS. If you already have arm9loaderhax installed and are looking to update to boot9strap, follow [A9LH to B9S](a9lh-to-b9s). -{: .notice--primary} - -Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))! -{: .notice--info} - -Before starting, you may want to check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))! +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### Version Table - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FromToAction
1.0.02.0.0Update to latest firmware or use an "All Versions" Method
2.1.08.1.0Installing boot9strap (Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0Update to latest firmware or use an "All Versions" Method
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/vi_VN/godmode9-usage.txt b/_pages/vi_VN/godmode9-usage.txt index 99014ce114..cd139f0548 100644 --- a/_pages/vi_VN/godmode9-usage.txt +++ b/_pages/vi_VN/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 Usage" {% include toc title="Table of Contents" %} -For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw). +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### Required Reading diff --git a/_pages/vi_VN/home.txt b/_pages/vi_VN/home.txt index d2d66e2787..d0d244dc37 100644 --- a/_pages/vi_VN/home.txt +++ b/_pages/vi_VN/home.txt @@ -63,7 +63,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// ## What can I do with Custom Firmware? + Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.eu/) ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + Use "ROM hacks" for games that you own + Take gameplay and application screenshots + Backup, edit, and restore saves for many games @@ -78,11 +78,11 @@ For a list of each of the calculated sighax signatures, see [this gist](https:// + **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Finalizing Setup](finalizing-setup). -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). + Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off! + Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768). ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS. ___ diff --git a/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt b/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt index 18967c3719..487f25a45c 100644 --- a/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### What You Need - -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### Instructions - -#### Section I - Prep Work - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. Wait for the process to complete - + If it displays a yellow screen, power your console off, then try this section again -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/vi_VN/homebrew-launcher-(pichaxx).txt b/_pages/vi_VN/homebrew-launcher-(pichaxx).txt index 9617f6e756..241955b61c 100644 --- a/_pages/vi_VN/homebrew-launcher-(pichaxx).txt +++ b/_pages/vi_VN/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### Instructions @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. Copy `boot.3dsx` to the root of your SD card 1. Copy the otherapp payload to the root of your SD card and rename it to `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Create a folder named `3ds` on the root of your SD card if it does not already exist #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. Select your `movable.sed` file 1. Select "Build and Download" 1. Wait for the process to complete 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + Overwrite the old save file when prompted 1. Reinsert your SD card into your device 1. Power on your device 1. Launch "Pokemon Picross" 1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. + + You may see an error stating there are no applications found +1. Power off your device ___ diff --git a/_pages/vi_VN/homebrew-launcher-(soundhax).txt b/_pages/vi_VN/homebrew-launcher-(soundhax).txt index 9bba75dadc..c9d5b491e3 100644 --- a/_pages/vi_VN/homebrew-launcher-(soundhax).txt +++ b/_pages/vi_VN/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<3.0.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an [alternate method](homebrew-launcher-(alternatives)) of entering the Homebrew Launcher! {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ This means that using a cartridge update from a version containing an older Nint ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)* * The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region and version)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### Instructions diff --git a/_pages/vi_VN/homebrew-launcher-(steelhax).txt b/_pages/vi_VN/homebrew-launcher-(steelhax).txt index 681be6021f..65ec1b9a69 100644 --- a/_pages/vi_VN/homebrew-launcher-(steelhax).txt +++ b/_pages/vi_VN/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "Homebrew Launcher (Steelhax)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop. - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### What You Need - -* The free eShop game "Steel Diver: Sub Wars" -* Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### Instructions - -#### Section I - Prep Work - -1. Create a folder named `3ds` on the root of your SD card if it does not already exist -1. Copy `boot.3dsx` to the root of your SD card -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. Copy the otherapp payload to the `steelhax` folder on your SD card and rename it to `payload.bin` - -#### Section II - Steelminer - -1. Insert your SD card into your device -1. Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file - + Decline the game update when prompted - + If you have already updated the game, use the Data Management menu of the System Settings to delete the update -1. Exit "Steel Diver: Sub Wars" -1. Power off your device -1. Insert your SD card into your computer -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. Select your `movable.sed` file -1. Select "Start!" -1. Wait for the process to complete -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `title` -> `00040000` -> `<8-character-region>` -> `data` on your SD card - + **EUR Region**: `000d7e00` - + **JPN Region**: `000d7c00` - + **USA Region**: `000d7d00` -1. Copy the new downloaded save file to the `data` folder on your SD card - + Overwrite the old save file when prompted -1. Reinsert your SD card into your device -1. Power on your device -1. Launch "Steel Diver: Sub Wars" -1. If the exploit was successful, your device will have loaded the Homebrew Launcher - + You may see an error stating there are no applications found. -1. Power off your device. - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/vi_VN/installing-boot9strap-(browser).txt b/_pages/vi_VN/installing-boot9strap-(browser).txt index 35b6370080..1e121d1943 100644 --- a/_pages/vi_VN/installing-boot9strap-(browser).txt +++ b/_pages/vi_VN/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "Installing boot9strap (Browser)" {% include toc title="Table of Contents" %} +### Required Reading + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### What You Need +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -16,24 +24,21 @@ title: "Installing boot9strap (Browser)" 1. Power off your device 1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `SafeB9SInstaller.dat` and `Launcher.dat` from the SafeB9SInstaller `.zip` to the root of your SD card - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device #### Section II - Launching SafeB9SInstaller -1. Launch the browser and go to one of the following URLs on your device - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) 1. If the exploit was successful, you will have booted into SafeB9SInstaller @@ -50,7 +55,6 @@ title: "Installing boot9strap (Browser)" 1. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** 1. Press (Start) to save and reboot - + If you get an error, just continue the next page ___ diff --git a/_pages/vi_VN/installing-boot9strap-(fredtool).txt b/_pages/vi_VN/installing-boot9strap-(fredtool).txt index 46eedbe264..4172db718f 100644 --- a/_pages/vi_VN/installing-boot9strap-(fredtool).txt +++ b/_pages/vi_VN/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Fredtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This is a currently working implementation of the "FIRM partitions known-plainte ### What You Need -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * Your `movable.sed` file from completing [Seedminer](seedminer) * The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work @@ -28,18 +31,18 @@ This is a currently working implementation of the "FIRM partitions known-plainte #### Section II - Fredtool -1. Open [Fredtool](https://fredtool.bruteforcemovable.com/) on your computer +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. Select your `movable.sed` file for the "Your movable.sed" field 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. Complete the "I'm not a robot" captcha 1. Select "Start" 1. Wait for the process to complete 1. When the process has completed, download your modified DSiWare archive from the site - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. Reinsert your SD card into your device 1. Power on your device @@ -87,7 +90,7 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Power off your device 1. Insert your SD card into your computer -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + Replace the existing `42383841.bin` file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/vi_VN/installing-boot9strap-(frogtool).txt b/_pages/vi_VN/installing-boot9strap-(frogtool).txt index 01691c1a1d..cc1f63434c 100644 --- a/_pages/vi_VN/installing-boot9strap-(frogtool).txt +++ b/_pages/vi_VN/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "Installing Boot9strap (Frogtool)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap. @@ -18,14 +21,14 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * The latest release of [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * The latest release of [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work 1. Insert your SD card into your computer 1. Copy your `movable.sed` file to the root of your SD card 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. Copy `Frogtool.3dsx` to the `/3ds/` folder on your SD card 1. Copy `frogcert.bin` to the root of your SD card 1. Reinsert your SD card into your device @@ -74,6 +77,26 @@ If you would prefer a visual guide to this section, one is available [here](http 1. Press (Start) to save and reboot + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. Select "Miscellaneous options" +1. Select "Switch the hb. title to the current app." +1. Press (B) to continue +1. Press (B) to return to the Rosalina main menu +1. Press (B) to exit the Rosalina menu +1. Press (Home), then close Download Play +1. Relaunch the Download Play application +1. Your device should load the Homebrew Launcher +1. Launch Frogtool from the list of homebrew +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### Continue to [Finalizing Setup](finalizing-setup) diff --git a/_pages/vi_VN/installing-boot9strap-(hardmod).txt b/_pages/vi_VN/installing-boot9strap-(hardmod).txt index 7ff5108da8..1e03aa7cf1 100644 --- a/_pages/vi_VN/installing-boot9strap-(hardmod).txt +++ b/_pages/vi_VN/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py` -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * The `.firm` corresponding to your device and version: | Version(s) | Kernel | Old 3DS or Old 2DS | New 3DS or New 2DS | diff --git a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt index 25fc1a6722..a42d09cecd 100644 --- a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt +++ b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="Table of Contents" %} - -### Required Reading - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### What You Need - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### Section I - Prep Work - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### Section III - Configuring Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. Use the (A) button and the D-Pad to turn on the following: - + **"Show NAND or user string in System Settings"** -1. Press (Start) to save and reboot - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. Launch the Download Play application -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. Select "Miscellaneous options" -1. Select "Switch the hb. title to the current app." -1. Press (B) to continue -1. Press (B) to return to the Rosalina main menu -1. Press (B) to exit the Rosalina menu -1. Press (Home), then close Download Play -1. Relaunch the Download Play application -1. Your device should load the Homebrew Launcher -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### Continue to [Finalizing Setup](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt index cde9885cfe..a3e549a817 100644 --- a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt +++ b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this * A magnet that triggers the sleep mode of your device (if using a folding style device) * Your ntrboot flashed flashcart * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions #### Section I - Prep Work 1. Power off your device -1. Insert your device's SD card into your computer +1. Insert your console's SD card into your computer + This is the SD card from your 3DS, *not* the SD card from your flashcart -1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Create a folder named `boot9strap` on the root of your SD card -1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. Reinsert your SD card into your device +1. Reinsert your SD card into your 3DS 1. Power on your device #### Section II - ntrboot diff --git a/_pages/vi_VN/installing-boot9strap-(pichaxx).txt b/_pages/vi_VN/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..c9423e403b --- /dev/null +++ b/_pages/vi_VN/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="Table of Contents" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### Required Reading + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### What You Need + +* The game "Pokémon Picross" (free on eShop) +* Your `movable.sed` file from completing [Seedminer](seedminer) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. Select your `movable.sed` file +1. Select "Build and Download" +1. Wait for the process to complete +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + Overwrite the old save file when prompted +1. Reinsert your SD card into your device +1. Power on your device +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### Section III - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section IV - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + + If you get an error, just continue the next page + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/vi_VN/installing-boot9strap-(safecerthax).txt b/_pages/vi_VN/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..a69e875f75 --- /dev/null +++ b/_pages/vi_VN/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### What You Need + +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work +1. Power off your device +1. Insert your SD card into your computer +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. If the exploit was successful, you will have booted into SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} diff --git a/_pages/vi_VN/installing-boot9strap-(soundhax).txt b/_pages/vi_VN/installing-boot9strap-(soundhax).txt index 1ca04197d7..b7ae0fbed3 100644 --- a/_pages/vi_VN/installing-boot9strap-(soundhax).txt +++ b/_pages/vi_VN/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "Installing boot9strap (Soundhax)" ### Required Reading -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -Note that cartridge updates will only deliver updates to core features, such as the System Settings, Home Menu, etc. cartridge updates will not deliver updates to Nintendo 3DS Sound and Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza, or eShop. - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! You will need an alternate method of entering the Homebrew Launcher such as [Installing boot9strap (Browser)](installing-boot9strap-(browser)) or [Installing boot9strap (MSET)](installing-boot9strap-(mset))! -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### What You Need * The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(the `.bin` file corresponding to your firmware version)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### Instructions @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. Power off your device 1. Insert your SD card into your computer 1. Copy the Soundhax `.m4a` to the root of your SD card -1. Copy the pre9otherapp payload to the root of your SD card and rename it to `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.3dsx` to the root of your SD card +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card -1. Copy `arm9.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. Reinsert your SD card into your device 1. Power on your device @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + In this situation, launching Soundhax immediately would cause these tips to appear on every launch of the Nintendo 3DS Sound until this is done 1. Go to `/SDCARD`, then play "<3 nedwill 2016" + This may take many tries - + If it freezes, just force the console to power off by holding the power button, then try again + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/vi_VN/installing-boot9strap-(ssloth-browser).txt b/_pages/vi_VN/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..ece1953c6d --- /dev/null +++ b/_pages/vi_VN/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### What You Need + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### Section I - Prep Work + +1. Power off your device +1. Insert your SD card into your computer +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. Create a folder named `boot9strap` on the root of your SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. Reinsert your SD card into your device +1. Power on your device + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +#### Section III - Launching SafeB9SInstaller +1. Power on your device +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. If the exploit was successful, you will have booted into SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. Wait for all safety checks to complete +1. When prompted, input the key combo given to install boot9strap +1. Once it has completed, press (A) to reboot your device + +#### Section V - Configuring Luma3DS + +1. Your device should have rebooted into the Luma3DS configuration menu + + If you get a black screen, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. Use the (A) button and the D-Pad to turn on the following: + + **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. Power off your device + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/vi_VN/installing-boot9strap-(usm).txt b/_pages/vi_VN/installing-boot9strap-(usm).txt index 079b370df0..c3145e91cf 100644 --- a/_pages/vi_VN/installing-boot9strap-(usm).txt +++ b/_pages/vi_VN/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### Required Reading In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### What You Need * Your `movable.sed` file from completing [Seedminer](seedminer) -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### Section I - Prep Work -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. Insert your SD card into your computer 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### Section IV - Configuring Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. Navigate to `Data Management` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. Power off your device 1. Insert your SD card into your computer -1. Navigate to `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` on your SD card - + This `` will be the same one that you used in [Seedminer](seedminer) +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/vi_VN/legacy-methods.txt b/_pages/vi_VN/legacy-methods.txt index f5cf03e567..b9da394c9c 100644 --- a/_pages/vi_VN/legacy-methods.txt +++ b/_pages/vi_VN/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS Internet Settings Test (used for Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/vi_VN/ntrboot.txt b/_pages/vi_VN/ntrboot.txt index 76f128345f..d0c531cd38 100644 --- a/_pages/vi_VN/ntrboot.txt +++ b/_pages/vi_VN/ntrboot.txt @@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files | Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | No | None | None | | | **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/vi_VN/region-changing.txt b/_pages/vi_VN/region-changing.txt index 75af6091cf..595af43745 100644 --- a/_pages/vi_VN/region-changing.txt +++ b/_pages/vi_VN/region-changing.txt @@ -17,7 +17,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of your device that created them and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **all Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. Additionally, note that occasionally the eShop will inexplicably work for devices that it should not (such as some New 3DSs). The cause for this is currently unknown. @@ -55,12 +55,34 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Copy `FBI.3dsx` to the `/3ds/` folder on your SD card 1. Reinsert your SD card into your device -#### Section II - CTRTransfer - +#### Section II - NAND Backup 1. Launch GodMode9 by holding (Start) during boot 1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed 1. If you are prompted to fix the RTC date&time, press (A) to do so, then set the date and time, then press (A) to continue + Note that, if you had to fix the RTC date and time, you will have to fix the time in the System Settings as well after this guide +1. Press (Home) to bring up the action menu +1. Select "Scripts..." +1. Select "GM9Megascript" +1. Select "Backup Options" +1. Select "SysNAND Backup" +1. Press (A) to confirm + + This process will take some time + + If you get an error, make sure that you have at least 1.3GB of free space on your SD card +1. Press (A) to continue +1. Press (B) to return to the main menu +1. Select "Exit" +1. Press (A) to relock write permissions if prompted +1. Hold (R) and press (B) at the same time to eject your SD card +1. Insert your SD card into your computer +1. Copy `__sysnand_###.bin` and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer + + Make backups in multiple locations (such as online file storage) + + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future +1. Delete `__sysnand_###.bin` and `__sysnand_###.bin.sha` from the `/gm9/out/` folder on your SD card after copying it +1. Reinsert your SD card into your device + + If your SD card was not detected, hold (R) and press (B) at the same time to remount it + +#### Section III - CTRTransfer + 1. Navigate to `[0:] SDCARD` -> `gm9` 1. Press (A) on the CTRTransfer `.bin` to select it 1. Select "CTRNAND options..." @@ -87,7 +109,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. + Updates while using B9S + Luma (what you have) are safe + If this gives you an error, set your DNS settings to "auto" -#### Section III - Launching FBI +#### Section IV - Launching FBI 1. Launch the Download Play application (this [icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu @@ -100,7 +122,7 @@ You MUST have already installed Luma3DS and boot9strap to use this. 1. Launch the Download Play application 1. Your device should load the Homebrew Launcher -#### Section IV - Reinstalling Tickets +#### Section V - Reinstalling Tickets If script found no user tickets told you to skip this section, then skip this section {: .notice--info} @@ -120,14 +142,14 @@ If script found no user tickets told you to skip this section, then skip this se + Press (B) to decline installing tickets from CDN. 1. Press (Home) to exit FBI -#### Section V - Region settings +#### Section VI - Region settings 1. Launch the System Settings 1. Go to "Other Settings", "Profile", then "Region Settings" 1. Select a country from the region you switched to 1. If prompted, you do not need to set a state -#### Section VI - Remove CTRTransfer image +#### Section VII - Remove CTRTransfer image 1. Launch GodMode9 by holding (Start) during boot 1. Navigate to `[0:] SDCARD` -> `gm9` diff --git a/_pages/vi_VN/restoring-cfw.txt b/_pages/vi_VN/restoring-cfw.txt new file mode 100644 index 0000000000..e73e86c5be --- /dev/null +++ b/_pages/vi_VN/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="Table of Contents" %} + +### Required Reading + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### What You Need +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### Instructions + +#### Section I - Prep Work + +1. Insert your SD card into your computer +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Reinsert your SD card into your device + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. Use the (A) button and the D-Pad to turn on the following: + * **"Show NAND or user string in System Settings"** +1. Press (Start) to save and reboot + +___ + +### Continue to [Finalizing Setup](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/vi_VN/seedminer.txt b/_pages/vi_VN/seedminer.txt index 337613229f..f9a80ee18e 100644 --- a/_pages/vi_VN/seedminer.txt +++ b/_pages/vi_VN/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="Table of Contents" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### Required Reading -To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications. +To install boot9strap on your device, we derive your device's unique encryption key. To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region). @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### Instructions -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### Section II - Prep Work +#### Section I - Prep Work 1. Insert your SD card into your computer 1. Navigate to the `Nintendo 3DS` folder on your SD card @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + This folder name is also known as your "ID0" 1. Power on your device 1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. Find your Mii profile, then find the "Friend Code" field on the top screen -#### Section III - Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field 1. Paste your device's 32 character long folder name into the "Your ID0" field + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. Select "Go" - + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section. + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console 1. Wait for the site to update + If it does not, wait a few minutes before refreshing the page once 1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button 1. Wait for the remainder of the process to complete - + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour. - + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue. + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. When the process has completed, download your `movable.sed` file from the site + Keep this file as you will need it in the upcoming pages ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/vi_VN/site-navigation.txt b/_pages/vi_VN/site-navigation.txt index 2c42dcc501..37448fb9d6 100644 --- a/_pages/vi_VN/site-navigation.txt +++ b/_pages/vi_VN/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **Popular** + [Finalizing Setup](finalizing-setup) -+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [Cartridge Update](cart-update) + [Credits](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [Donations](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [Flashing ntrboot (3DS Multi System)](flashing-ntrboot-(3ds-multi-system)) + [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi)) + [Flashing ntrboot (NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [Get Started](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 Usage](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax)) + [Installing boot9strap (2xrsa)](installing-boot9strap-(2xrsa)) + [Installing boot9strap (Browser)](installing-boot9strap-(browser)) + [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) + [Installing boot9strap (MSET)](installing-boot9strap-(mset)) + [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [Move EmuNAND](move-emunand) + [ntrboot](ntrboot) + [Region Changing](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [Troubleshooting](troubleshooting) + [Uninstall CFW](uninstall-cfw) + [Updating B9S](updating-b9s) diff --git a/_pages/vi_VN/updating-b9s.txt b/_pages/vi_VN/updating-b9s.txt index 84d8eb17f1..7bc0a5a605 100644 --- a/_pages/vi_VN/updating-b9s.txt +++ b/_pages/vi_VN/updating-b9s.txt @@ -8,28 +8,14 @@ title: "Updating B9S" This page is for existing boot9strap users to update their installation of boot9strap to the latest version. -{% capture notice-1 %} -There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide: - -1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information" -1. Disable the "Sending of System Information" option -1. Exit the System Settings -1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu) - + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues) -1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing" -1. Disable the "Show friends what you're playing" option -1. Exit your Friend List - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### What You Need * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### Instructions @@ -39,7 +25,6 @@ For all steps in this section, overwrite any existing files on your SD card. {: .notice--info} 1. Insert your SD card into your computer -1. Copy `boot.3dsx` to the root of your SD card 1. Create a folder named `boot9strap` on the root of your SD card 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card 1. Copy `SafeB9SInstaller.firm` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card @@ -58,7 +43,7 @@ For all steps in this section, overwrite any existing files on your SD card. 1. Power off your device 1. Insert your SD card into your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. Reinsert your SD card into your device 1. Power on your device diff --git a/_pages/zh_CN/a9lh-to-b9s.txt b/_pages/zh_CN/a9lh-to-b9s.txt index b26f4197fb..00219832d3 100644 --- a/_pages/zh_CN/a9lh-to-b9s.txt +++ b/_pages/zh_CN/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ title: "A9LH 升级 B9S" 请使用 [7-Zip](http://www.7-zip.org/) 或 [The Unarchiver](https://theunarchiver.com/) 之类的压缩软件来解压本页面上的 `.7z` 文件。 -如果你的 Luma3DS 设置了 PIN 密码，请先暂时将其关闭，否则 SafeB9SInstaller 会提示 “OTP Crypto Fail” 错误信息（升级完毕后你可以重新打开 PIN 密码）。 +我们现在相信自制固件可以安全地联网了，不过仍然要提一下：过去的联网封禁大多数是因为作弊和可疑的 eShop 行为造成的。 {: .notice--warning} -{% capture notice-1 %} -据消息称，任天堂大量封禁了使用自制固件（CFW）的用户。 为了自保，请在继续教程前先进行如下操作： - -1. 进入“系统设置(System Settings)”，点击“互联网设置(Internet Settings)”，然后再点击“SpotPass”，之后再继续点击“发送系统信息(Sending of System Information)” -1. 关闭“发送系统信息(Sending of System Information)”选项 -1. 退出系统设置 -1. 打开你的好友列表（Home 主菜单中最上方的[橙色的笑脸]({{ "/images/friend-list-icon.png" | absolute_url }})） - + 如果出现错误信息并被踢回到主菜单，则好友列表设置可能已被禁用或你的设备无法连接到任天堂服务器（由于封禁或网络问题） -1. 进入“好友列表设置(Friend List settings)”，然后点击“好友提示设置 (Friend Notification Settings)”，再然后点击“展示正在游玩的游戏 (Show friends what you're playing)” -1. 关闭“向好友展示正在玩的游戏(Show friends what you're playing)”选项 -1. 退出好友列表 - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### 你需要准备点啥？ 请注意，在下面所需的文件中名为“secret_sector.bin”的文件可在各版本的“data_input.zip”（这是 arm9loaderhax 破解时期所下载的文件）中找到，并且与下文所给出的文件是一模一样的。 如果你已经在电脑中存储了该文件，你就可以直接使用那个文件而不用再在下面重新下载了。 @@ -42,23 +26,21 @@ title: "A9LH 升级 B9S" {: .notice--info} * - **仅使用 New 3DS 的用户需下载:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* 7.0.5版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) **（下载 `.7z` 格式的压缩包文件）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* 7.0.5 版本的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *（`.7z` 文件）* * 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** -* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 如果你在进行这些步骤时被提示 SD 卡中有相同文件，请选择全部替换。 {: .notice--info} 1. 关闭你的主机 1. 将你的 SD 卡插入到电脑 -1. 复制 `boot.3dsx` 到你的 SD 卡根目录 -1. 解压最新版 Luma3DS `.zip` 里的 `boot.firm` 到你 SD 卡的根目录 +1. 解压最新版 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 1. 从 Luma3DS `.7z` 压缩包中复制 `arm9loaderhax.bin` 文件到你 SD 卡的根目录 1. 删除SD卡 `/luma/payloads/` 文件夹中任何后缀为 `.bin` 的文件，因为它们在支持 boot9strap 的 Luma3DS 版本中无法使用 1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到SD卡 `/luma/payloads/` 目录中 @@ -71,7 +53,7 @@ title: "A9LH 升级 B9S" 1. 将 SD 卡插回到你的设备 -#### 第二步 — 安装 boot9strap +#### 第二步 – 安装 boot9strap 1. 按住 “start” 键开机来启动 SafeB9SInstaller + 如果你看到 Luma 设置弹出而不是进入 SafeB9SInstaller，那么按下 “start” 键，然后关闭3DS，之后再试一次 diff --git a/_pages/zh_CN/bannerbomb3.txt b/_pages/zh_CN/bannerbomb3.txt index 9f6991e08d..1a7c2a31e6 100644 --- a/_pages/zh_CN/bannerbomb3.txt +++ b/_pages/zh_CN/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="目录内容" %} +基于 Seedminer 的方法已被更简单且更安全的方法取代。 除非你有原因（如肩键损坏）而不得不使用本教程，请回到[新手入门(get-started)查阅新的方法。 +{: .notice--warning} + ### 必读事项 我们使用了一个在 3DS 系统设置应用程序的 DSiWare 数据管理窗口中的一个漏洞来导出系统的 DSiWare 软件。 @@ -16,8 +19,8 @@ title: "BannerBomb3" * 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 -#### 第一步 — BannerBomb3 -1. 在你的电脑上打开 [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) +#### 第一步 – BannerBomb3 +1. 在你的电脑上打开 [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) 1. 点击 “选择文件” 选项，然后选择你的 movable.sed 上传 1. 点击 “Go” + 这个操作将可以从下载后的 zip 文件（`tadmuffin_out.zip`）中得到一个叫做 `F00D43D5.bin` 的可被漏洞利用的 DSiWare 系统文件 diff --git a/_pages/zh_CN/checking-for-cfw.txt b/_pages/zh_CN/checking-for-cfw.txt new file mode 100644 index 0000000000..b5f1b567a2 --- /dev/null +++ b/_pages/zh_CN/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "检查自制固件" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +这是一个用于检查你的主机是否已安装现代自制固件的附加章节。 + +如果你的主机已经可以运行基于 arm9loaderhax 或 boot9strap 的自制固件了，则你将需要根据后续的步骤来将升级到现代固件。 + +如果你的主机使用主题破解过了，则你需要[清空主菜单外部存储](troubleshooting#clear-home-menu-extdata)，然后再在 SysNAND 上做完所有的步骤。 +{: .notice--primary} + +### 操作步骤 + +1. 将主机关机 +1. 按住 “Select” 键 +1. 按住 “Select” 键，然后按下电源键开机 +1. 你现在应该能够看到某类型的配置菜单了。 + +___ + +如果你的主机只是开机进入到了主菜单，那么返回[新手入门](get-started)章节 +{: .notice--success} + +如果你看到 Luma3DS 为 7.0.5 或更低的版本，则你需要 [A9LH 升级 B9S](a9lh-to-b9s) +{: .notice--primary} + +如果你看到 Luma3DS 版本为 7.1，继续至 [升级 B9S](updating-b9s) +{: .notice--primary} + +如果你看到 Luma3DS 的版本为 8.0 或更高版本，请继续至[恢复自制固件](restoring-cfw) +{: .notice--primary} + +如果你看到了其他不在上述中出现的东西，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)然后以英文寻求帮助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 +{: .notice--danger} diff --git a/_pages/zh_CN/credits.txt b/_pages/zh_CN/credits.txt index 1f01fe4470..668836b190 100644 --- a/_pages/zh_CN/credits.txt +++ b/_pages/zh_CN/credits.txt @@ -2,6 +2,9 @@ title: "致谢" --- +**特别感谢此教程的原作者和原维护者Plailect！** +{: .notice--primary} + **特别感谢所有在 [Freenode #Cakey](http://webchat.freenode.net/?channels=%23Cakey) 成员的杰出贡献！** {: .notice--primary} @@ -22,7 +25,7 @@ title: "致谢" + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ title: "致谢" + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ title: "致谢" + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/zh_CN/ctrtransfer.txt b/_pages/zh_CN/ctrtransfer.txt index 4e61da03bb..e7ed36ad0f 100644 --- a/_pages/zh_CN/ctrtransfer.txt +++ b/_pages/zh_CN/ctrtransfer.txt @@ -32,7 +32,7 @@ title: "CTRtransfer" ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将你的 SD 卡插入到电脑 @@ -44,7 +44,7 @@ title: "CTRtransfer" 1. 复制 `FBI.3dsx` 到SD卡的 `/3ds/` 目录下 1. 将SD卡重新插入你的主机 -#### 第二步 — CTRTransfer +#### 第二步 – CTRTransfer 1. 开机时按住 “Start” 键启动 GodMode9 1. 如果工具提示是否需要创建重要文件备份，请按下 “A” 键确认，在完成后再次按下 “A” 键来继续。 @@ -76,7 +76,7 @@ title: "CTRtransfer" + 你使用B9S和Luma时升级系统是安全的 + 如果在更新中途出错，请将主机的 DNS 设置改为 “自动(auto)” -#### 第五步 — 启动 FBI 应用 +#### 第五步 – 启动 FBI 应用 1. 启动“下载通信(Download Play)”程序 (它长[这样]({{ "/images/download-play-icon.png" | absolute_url }}) 1. 同时按下“L”+“下”+“Select” 键来打开 Rosalina 菜单 @@ -89,7 +89,7 @@ title: "CTRtransfer" 1. 运行“下载通信(Download Play)”程序 1. 此时你的主机应该会启动 Homebrew Launcher了 -#### 第四步 — 重装Tickets +#### 第四步 – 重装Tickets 如果脚本没有找到任何使用者的 tickets 并且告诉你跳过本小节，那么就跳过本小节 {: .notice--info} @@ -109,7 +109,7 @@ title: "CTRtransfer" + 按 “B” 键来拒绝从 CDN 安装 tickets。 1. 按 “Home” 键退出 FBI -#### 第五步 — 删除 CTR转移(CTRtransfer) 镜像 +#### 第五步 – 删除 CTR转移(CTRtransfer) 镜像 1. 开机时按住 “Start” 键启动 GodMode9 1. 移动至 `[0:] SDCARD` -> `gm9` diff --git a/_pages/zh_CN/dsidumper.txt b/_pages/zh_CN/dsidumper.txt index a48f2a4df0..19bead339f 100644 --- a/_pages/zh_CN/dsidumper.txt +++ b/_pages/zh_CN/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="目录内容" %} - -### 必读事项 - -我们使用一个现有的 homebrew launcher 漏洞来导出你系统的 DSiWare 软件。 - -如果你在此部分的教程中发现了损坏的 DS 互联网设置程序，请先通过 [Homebrew 修复 TWL 分区](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases)然后再继续 - -### 你需要准备点啥？ - -* 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 -* 最新版 [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### 第一步 — 准备工作 - -1. 将设备关机 -1. 将你的 SD 卡插入到电脑 -1. 复制 `movable.sed` 文件到你的SD卡根目录 -1. 复制 `DSiWare_Dump.3dsx` 到你 SD 卡的 `/3ds/` 文件夹 -1. 将SD卡重新插入你的主机 -1. 启动你的主机 - -#### 第二步 — DSiWare 导出 - -1. 使用任何方法来启动 Homebrew Launcher -1. 从自制程序列表中运行 DSiWare Dumper - + 这将导出 DSiWare 程序到你的内存卡根目录 - + 如果看到若干失败提示是正常的。 -1. 当它提示“成功(Success)”时，导出的文件将是你在之后教程中要用的文件 - -继续至[安装 boot9strap（通过Fredtool）](installing-boot9strap-(fredtool)) -{: .notice--primary} - +此页面由于使用的方法已经过时而被移除。 请回到[新手入门](get-started)使用较新的方法代替本教程。 +{: .notice--warning} diff --git a/_pages/zh_CN/faq.txt b/_pages/zh_CN/faq.txt index fa00a95b98..a458a774f3 100644 --- a/_pages/zh_CN/faq.txt +++ b/_pages/zh_CN/faq.txt @@ -3,49 +3,49 @@ title: "常见问题" --- **问：** **我的主机系统是最新版， 可以破解吗？** -**答:** 是的 +**答：** 是的 **问：** **我该如何升级Luma3DS？** -**答:** 使用 [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** 从 [Luma3DS 发行页](https://github.com/LumaTeam/Luma3DS/releases/latest) 下载最新版本的压缩包，从中复制出 `boot.firm` 和 `boot.3dsx` 文件，覆盖至内存卡根目录。 **问：** **我听说有一些破解是要买一些工具的，比如 Gateway、Sky3DS 之类的玩意儿。 我要买么？** -**答:** 不。 boot9strap 是目前最好的 3DS 破解，因为它在开机前几秒钟就会将所需的东西加载完毕。 +**答：** 不。 boot9strap 是目前最好的 3DS 破解，因为它在开机前几秒钟就会将所需的东西加载完毕。 **问：** **我该如何将 Gateway 中的游戏存档迁移到机器内安装的游戏中？** -**答:** 看[这里](https://gbatemp.net/threads/425743/) +**答：** 看[这里](https://gbatemp.net/threads/425743/) **问：** **破解我的机器容易变砖吗？** -**答:** 除非你忽略/跳过所有的安全检查，**基本**上不会出现变砖的情况。 +**答：** 除非你忽略/跳过所有的安全检查，**基本**上不会出现变砖的情况。 **问：** **我可以通过这个破解来运行自制程序和模拟器吗？** -**答:** 可以！ 自制固件不仅能运行Homebrew Launcher，还能让你在任何系统版本上都保持破解状态，这也就是说即使你升级了系统，破解依然还是存在的。 +**答：** 可以！ 自制固件不仅能运行Homebrew Launcher，还能让你在任何系统版本上都保持破解状态，这也就是说即使你升级了系统，破解依然还是存在的。 **问：** **我可以通过这个破解来玩别的区域的游戏么？** -**答:** Luma3DS 支持跨区补丁，这允许你可以安装和运行任何区域的游戏而无需额外的修改。 +**答：** Luma3DS 支持跨区补丁，这允许你可以安装和运行任何区域的游戏而无需额外的修改。 **问：** **升级自制固件的时候 SysNAND 是否安全？** -**答:** 是的， 这非常安全，请别再问了。 +**答：** 是的， 这非常安全，请别再问了。 **问：** **我能在哪里获得帮助？** -**答:** 懂英文的话可以在[Nintendo Homebrew Discord服务器](https://discord.gg/MWxPgEp)上使用英文寻求帮助。（请注意，如果你身处中国大陆，则你可能需要通过科学上网访问 Discord），你也可以到译者的QQ群寻求帮助，群号为942052497。 +**答：** 懂英文的话可以在[Nintendo Homebrew Discord服务器](https://discord.gg/MWxPgEp)上使用英文寻求帮助。（请注意，如果你身处中国大陆，则你可能需要通过科学上网访问 Discord），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 **问：** **我可以使用 4GB 或更小的 SD 卡来完成本教程吗？** -**答:** 可以！ +**答：** 可以！ **问：** **我可以使用 128GB 或更大容量的 SD 卡吗？** -**答:** 可以，但是有些用户反映使用如此大容量的SD卡会造成速度变慢。 不要将你的内存卡格式化为 exFAT 格式，请格式化为 FAT32 格式。 +**答：** 可以，但是有些用户反映使用如此大容量的SD卡会造成速度变慢。 不要将你的内存卡格式化为 exFAT 格式，请格式化为 FAT32 格式。 **问：** **完成本教程后，如果我想更换 SD 卡该怎么做？** -**答:** 把所有原 SD 卡上的所有文件复制到新 SD 卡上即可。 +**答：** 把所有原 SD 卡上的所有文件复制到新 SD 卡上即可。 **问：** **我可以保留我的 NNID 吗？** -**答:** 如果你在教程开始之前已经登录了 NNID，并且严格按照教程的步骤进行，完成教程后你的 NNID 还是在的。 +**答：** 如果你在教程开始之前已经登录了 NNID，并且严格按照教程的步骤进行，完成教程后你的 NNID 还是在的。 **问：** **那么软件和资料转移（System Transfers）呢？** -**答:** 当你完成本教程之后，你可以和另一台做过 boot9strap 破解的 3DS 或 2DS 进行来回迁移，就像你在未破解设备或者 EmuNAND 上进行的那样（在迁移过程中你会丢失所有的非法游戏/主题/DLC；所有（包括丢失的游戏）存档会被保留）。 +**答：** 当你完成本教程之后，你可以和另一台做过 boot9strap 破解的 3DS 或 2DS 进行来回迁移，就像你在未破解设备或者 EmuNAND 上进行的那样（在迁移过程中你会丢失所有的非法游戏/主题/DLC；所有（包括丢失的游戏）存档会被保留）。 **问：** **没有电脑也能完成本教程吗（例如 用一台安卓手机）？** -**答:** 只要你能把文件放到 SD 卡上就行！ +**答：** 只要你能把文件放到 SD 卡上就行！ **问：** **帮帮我！ 我的机子开不了机了……** -**答:** 参见[问题排查](troubleshooting)。 +**答：** 参见[问题排查](troubleshooting)。 diff --git a/_pages/zh_CN/finalizing-setup.txt b/_pages/zh_CN/finalizing-setup.txt index 6d4033dd0b..560f1333e0 100644 --- a/_pages/zh_CN/finalizing-setup.txt +++ b/_pages/zh_CN/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "完成安装" `boot.firm` 文件是 boot9strap 在加载 NAND 之后自行启动的文件，它可以是任意有效的、FIRM格式的 arm9 payload。 你可以随时替换此文件，不过 Luma3DS 允许通过引导菜单加载其他 FIRM 格式的 arm9 payload。 -本教程中，我们将使用 [AuroraWright](https://github.com/AuroraWright/) 制作的 Luma3DS 来直接启动一个破解过的 SysNAND ，完全不用 EmuNAND 并简化破解3DS系统的步骤和节省 SD.卡的空间。 +本教程中，我们将使用 [LumaTeam](https://github.com/LumaTeam/) 制作的 Luma3DS 来直接启动一个破解过的真实系统（SysNAND），完全用不到虚拟系统（EmuNAND）（简化破解3DS系统的步骤并节省 SD 卡的空间）。 在这个过程当中，我们还会安装像下面所示的几个工具： + **FBI（用来安装 CIA 格式的游戏和程序）** + **Anemone3DS（安装自定义主题）** + **Checkpoint（备份和恢复你 3DS/DS 的游戏存档）** -+ **Luma3DS Updater（用来更新 Luma3DS 固件）** ++ **Universal-Updater** **（一个在 3DS 连接 Wifi 后用来下载自制程序的商店）** + **GodMode9（一款多功能工具，可以处理 NAND 和卡带的相关功能）** + **Homebrew Launcher Loader（启动 Homebrew Launcher 的快捷方式）** + **DSP1（允许自制程序播放音乐）** @@ -25,36 +25,37 @@ title: "完成安装" * 最新版 [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) **（下载 `.cia` 文件）** * 最新版 [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *（下载 `.cia` 文件）* +* 最新版 [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *（下载 `.cia` 文件）* * 最新版 [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* 最新版 [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* 最新版 [DSP1](https://github.com/zoogie/DSP1/releases/latest) *（`.cia` 文件）* * 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) **（下载 `.cia` 和 `.3dsx` 文件）** * 最新版 [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* 最新版 [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) **（下载后缀为 `.cia` 的文件）** ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将你的 SD 卡插入电脑 1. 检查 SD 卡的根目录是否存在一个名为 `3ds` 的文件夹，如果没有则手动新建一个 + + 这个文件夹是用来存放 Homebrew 自制程序的；和设备自动生成的 `Nintendo 3DS` 文件夹无关。 1. 检查你的 SD 卡根目录是否有一个叫 `cias` 的文件夹，如果没有则手动新建一个 1. 复制 `ctr-no-timeoffset.3dsx` 到你 SD 卡的 `/3ds/` 文件夹中 1. 复制 `FBI.3dsx` 到你SD卡的 `/3ds/` 文件夹中 1. 复制 `Homebrew_Launcher.cia` 到你 SD 卡的 `/cias/` 文件夹中 -1. 复制 `lumaupdater.cia` 到你 SD 卡的 `/cias/` 文件夹中 1. 复制 `FBI.cia` 到你 SD 卡的 `/cias/` 文件夹中 1. 复制 `DSP1.cia` 到你 SD 卡的 `/cias/` 文件夹中 1. 复制 `Anemone3DS.cia` 到你 SD 卡的 `/cias/` 文件夹中 1. 复制 `Checkpoint.cia` 到你 SD 卡的 `/cias/` 文件夹中 +1. 复制 `Universal-Updater.cia` 到你 SD 卡的 `/cias/` 文件夹中 1. 如果 SD 卡的 `luma` 文件夹下没有一个名为 `payloads` 的文件夹，那么请新建一个 1. 将 GodMode9 `.zip` 中的 `GodMode9.firm` 复制到你SD卡的 `/luma/payloads/` 文件夹中 1. 将 GodMode9 `.zip` 中的整个 `gm9` 文件夹复制到 SD 卡的根目录下 1. 将 SD 卡重新插入设备 1. 启动你的主机 -#### 第二步 — 更新系统 +#### 第二步 – 更新系统 如果你按照旧版的教程将你的 *New 3DS* 降级到了2.1.0，你应当在执行这些步骤前[还原 NAND 备份](godmode9-usage#restoring-a-nand-backup) {: .notice--danger} @@ -68,7 +69,7 @@ title: "完成安装" + 如果在更新中途出错，请将主机的 DNS 设置改为 “auto(自动)” + 如果仍然提示错误，请进行 [CTRTransfer](ctrtransfer)，然后再尝试一次更新 -#### 第三步 — 进入 Homebrew Launcher +#### 第三步 – 进入 Homebrew Launcher 1. 启动“下载通信(Download Play)”程序 (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) 1. 等到你看到两个按钮 @@ -87,22 +88,22 @@ title: "完成安装" 1. 按 “Start” 键返回到 Homebrew Launcher 1. 从自制程序列表中找到并启动 FBI -#### 第四步 — 安装CIA +#### 第四步 – 安装CIA 1. 移动至 `SD` -> `cias` 1. 选择 “\” 1. 选择“安装和删除所有 CIA(Install and delete all CIAs)”选项，并按 “A” 键确认 1. 按下 “Home” 键，然后关闭“下载通信(Download Play)” -#### 第五步 — 导出 DSP +#### 第五步 – 导出 DSP 1. 启动 DSP1 应用 1. 处理完毕后，按 “B” 键自动删除该应用程序并返回到主菜单 -#### 第六步 — 将 Luma3DS 复制到 CTRNAND +#### 第六步 – 将 Luma3DS 复制到 CTRNAND 1. 将设备关机 -1. 开机时按住 “Start” 键启动 GodMode9 +1. 按住 “START” 键，然后将主机开机。 这会启动 GodMode9 1. 如果提示创建重要文件备份，按下 “A” 键确认，在完成后再次按下 “A” 键来继续。 1. 如果出现修复 RTC 日期与时间的提示，按 “A” 键执行修复，然后设置好日期和时间，并按 “A” 继续 1. 按下 “Home” 键来打开功能菜单 @@ -114,14 +115,14 @@ title: "完成安装" 1. 按 “A” 键解锁SysNAND (lvl1) 写入权限，并根据屏幕上的提示依次按下按键 1. 按 “A” 键继续 -#### 第七步 — 清理 SD 卡 +#### 第七步 – 清理 SD 卡 1. 选择 “Cleanup SD Card” 1. 出现提示时，按 “A” 键继续 1. 按 “A” 键继续 1. 按 “B” 键返回到主菜单 -#### 第七节 — 备份基础文件 +#### 第七节 – 备份基础文件 1. 选择 “Backup Options” 1. 选择 “SysNAND Backup” @@ -150,18 +151,8 @@ ___ #### 信息与注意事项 -{% capture notice-10 %} -你现在可以使用 Luma3DS Updater 来更新你的 Luma3DS 到最新版，只需运行该程序之后按下 “A” 键。 - -这和系统升级不是一回事；它只会下载并提取最新的 Luma3DS 文件。 - -这将更新你的 SD 卡上的 Luma3DS 文件以及 CTRNAND 中的 Luma3DS 的文件，在你的设备没有 SD 卡时将会自动启动 CTRNAND 中的文件。 -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -你的主机将会在预设下开机自动启动基于 Luma3DS 自制固件的 SysNAND。 +你的主机将会在预设下开机自动启动 Luma3DS 自制固件。 你可以在启动时按下 “Select” 键，进入 Luma3DS 的配置菜单。 @@ -175,9 +166,9 @@ ___
{{ notice-6 | markdownify }}
{% capture notice-6 %} -如果你想要更换更大的 SD 卡，只需要将 SD卡格式化为 FAT32 后，将原 SD 卡文件复制到新 SD 卡即可 +如果你想要更换更大的 SD 卡，只需要将 SD卡格式化为 FAT32 后，将原 SD 卡文件复制到新 SD 卡即可。 -如果你的 SD 卡大于 32GB，那么你需要使用其他的工具来格式化 SD 卡；例如 Windows 上的 [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm)、Linux 上的 [gparted](http://gparted.org/download.php)、Mac 上的[磁盘工具程序](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac)。 +如果你的新 SD 卡大于 32GB，那么你需要使用一个工具来格式化它。例如：Windows 上的 [guiformat](formatting-sd-(windows))，Mac 上的 [Disk Utility](formatting-sd-(mac))，Linux 上的 [cfdisk](formatting-sd-(linux))。 {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ ___ 如果想知道如何使用 Luma3DS 的各种功能，参见[这个wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} -关于安装自定义主题、图标和启动画面的资源，请查阅 [Theme Plaza](https://themeplaza.eu/)。 +关于安装自定义主题、图标和启动画面的资源，请查阅 [Theme Plaza](https://themeplaza.art/)。 {: .notice--success} 若想在 Luma3DS 中使用 Gateshark 金手指，请见 [Checkpoint](https://github.com/FlagBrew/Checkpoint)。 diff --git a/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt b/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt index a856d68072..70ce6709c5 100644 --- a/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt @@ -19,12 +19,12 @@ title: "写入 ntrboot 漏洞（通过多台 3DS）" * 两台 3DS 主机 + ** 3DS **：已经破解了 boot9strap 的 3DS + ** 目标 3DS **：运行原厂系统的 3DS -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）** +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `bootstrap-1.3-ntr.zip` 名字的文件；不要下载 devkit 名字的文件）** * 最新版 [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 关闭**源 3DS ** 1. 将**源 3DS **的 SD 卡插入你的电脑 @@ -34,7 +34,7 @@ title: "写入 ntrboot 漏洞（通过多台 3DS）" 1. 将 **源 3DS** 的 SD 卡重新插回 **源 3DS** 1. 将兼容 ntrboot 的 DS / DSi 烧录卡插入 **源 3DS** 中 -#### 第二步 — 写入 ntrboot +#### 第二步 – 写入 ntrboot 1. 在 **源3DS** 开机时按住 “Start” 键，运行 Luma3DS chainloader 1. 选择 “ntrboot_flasher” diff --git a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt index a75cc6d377..f1545fb828 100644 --- a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt @@ -16,12 +16,12 @@ title: "写入 ntrboot 漏洞（通过单台 3DS）" ### 你需要准备点啥？ * 一张兼容 ntrboot 的烧录卡 -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）* +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `bootstrap-1.3-ntr.zip` 名字的文件；不要下载 devkit 名字的文件）** * 最新版 [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将烧录卡中的 SD 卡插入电脑 @@ -31,7 +31,7 @@ title: "写入 ntrboot 漏洞（通过单台 3DS）" 1. 将 SD 卡插回烧录卡 1. 把兼容 ntrboot 的 DS / DSi 烧录卡插入设备 -#### 第二步 — 写入 ntrboot +#### 第二步 – 写入 ntrboot 1. 在你的设备上使用烧录卡，运行 `ntrboot_flasher_dsi.nds` 1. 按 “A” 键继续 diff --git a/_pages/zh_CN/flashing-ntrboot-(dsi).txt b/_pages/zh_CN/flashing-ntrboot-(dsi).txt index 2b2c938d8e..589e399363 100644 --- a/_pages/zh_CN/flashing-ntrboot-(dsi).txt +++ b/_pages/zh_CN/flashing-ntrboot-(dsi).txt @@ -23,7 +23,7 @@ title: "写入ntrboot（通过DSi）" ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 关闭**源 DSi** 1. 将烧录卡中的 SD 卡插入电脑 @@ -31,7 +31,7 @@ title: "写入ntrboot（通过DSi）" 1. 将 SD 卡插回烧录卡 1. 把兼容 ntrboot 的 DS / DSi 烧录卡插入 **源DSi** -#### 第二步 — 写入 ntrboot +#### 第二步 – 写入 ntrboot 1. 在你的 **源DSi** 上使用烧录卡，运行 `ds_ntrboot_flasher_dsi.nds` 1. 按 “A” 键继续 diff --git a/_pages/zh_CN/flashing-ntrboot-(nds).txt b/_pages/zh_CN/flashing-ntrboot-(nds).txt index 70eaaa8dc7..b46be78c0c 100644 --- a/_pages/zh_CN/flashing-ntrboot-(nds).txt +++ b/_pages/zh_CN/flashing-ntrboot-(nds).txt @@ -19,12 +19,12 @@ title: "写入 ntrboot 漏洞（通过 NDS）" * 两台主机 + **源 NDS / NDSL**：与你的烧录卡兼容的 Nintendo DS 或 Nintendo DS Lite + **目标 3DS**：运行原版系统的 3DS -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）* +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `bootstrap-1.3-ntr.zip` 名字的文件；不要下载 `devkit` 名字的文件）** * 最新版 [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 关闭**源 NDS / NDSL** 1. 将烧录卡中的 SD 卡插入电脑 @@ -34,7 +34,7 @@ title: "写入 ntrboot 漏洞（通过 NDS）" 1. 将 SD 卡插回烧录卡 1. 把兼容ntrboot的 DS / DSi 烧录卡插入 **源 NDS / NDSL** -#### 第二步 — 写入 ntrboot +#### 第二步 – 写入 ntrboot 1. 在你的 **源 NDS / NDSL** 上使用烧录卡，运行 `ntrboot_flasher_nds.nds` 1. 按 “A” 键继续 diff --git a/_pages/zh_CN/formatting-sd-(linux).txt b/_pages/zh_CN/formatting-sd-(linux).txt new file mode 100644 index 0000000000..1d7bb509d8 --- /dev/null +++ b/_pages/zh_CN/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "格式化 SD 卡（通过 Linux 操作系统）" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +这是一个适用于为 3DS 准备的 SD 卡的格式化教程。 + +如果 3DS 已经识别到了 SD 卡，那么就不需要做这个教程了。 + +本页教程仅限 Linux 用户。 If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### 操作步骤 +#### 第一步 – 确定你的 SD 卡在哪个路径中 + +1. 请确保你的 SD 卡 **未** 被插入电脑 +1. 启动 Linux 终端 +1. 输入 `watch "lsblk"` +1. 将 SD 卡插入你的电脑 +1. 查看终端输出内容。 输出内容应该与以下内容相似： +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. 注意设备的挂载点。 在我们上面的示例中，它是 `mmcblk0` + + 如果 `RO` 为 1，请确保写保护开关未被打开 +1. 按下 CTRL + C 退出菜单 + +#### 第二步 – 格式化 SD 卡 + +![](https://i.loli.net/2020/12/07/X8Sjt1LIYZhmaGg.png) + +1. 输入 `sudo cfdisk /dev/（由之前步骤得知的设备挂载点）` +1. 对每个分区按下 `Delete` +1. 创建一个等于你 SD 卡全部容量大小的分区 + + 这将会从 Linux 文件系统中创建一个新分区 +1. 选择 Type 并查看菜单 +1. 找到 “W95 FAT32” 并记住该文本左侧的代码 +1. 按下任意键，然后输入你在上一步中记住的代码 +1. 按下 Enter 键，然后选择 Quit diff --git a/_pages/zh_CN/formatting-sd-(mac).txt b/_pages/zh_CN/formatting-sd-(mac).txt new file mode 100644 index 0000000000..99a10ec185 --- /dev/null +++ b/_pages/zh_CN/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "格式化 SD 卡（通过 Mac 操作系统）" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +这是一个适用于为 3DS 准备的 SD 卡的格式化教程。 + +如果 3DS 已经识别到了 SD 卡，那么就不需要做这个教程了。 + +本页教程仅限 Mac 用户。 如果你没有在用 Mac，那么请看看[格式化 SD 卡（通过 Windows 操作系统）](formatting-sd-(windows))或[格式化 SD 卡（通过 Linux 操作系统）](formatting-sd-(linux)) 。 + +### 操作步骤 + +#### OS X El Capitan （10.11） 及更高版本 + +1. 将你的 SD 卡插入到电脑 +1. 如果 SD 卡上有一些文件或文件夹，请将它们全部复制到你的电脑上 +1. 运行磁盘工具（Disk Utility） +1. 选择左上角“视图”菜单里的“显示所有设备（Show All Devices）” +1. 在左侧面板中选择你的 SD 卡 + + 请确保你选对了驱动器，否则你可能会把别的驱动器格式化了！ + {: .notice--danger} + +1. 点击顶部的“擦除（Erase）” +1. 在“名称（Name）”一行随便输入一些内容 +1. 确保“格式（Format）”设置为 “MS-DOS (FAT)” +1. 确保“方案（Scheme）”设置为“主启动记录（Master Boot Record）” + + 如果没有“方案（Scheme）”选项，请点击“取消（Cancel）”并确认你选择的东西是驱动器而不是一个分区 +1. 点击“擦除（Erase）” +1. 等待格式化完成 +1. 点击“关闭（Close）” +1. 如果先前你从 SD 卡上复制了一些文件或文件夹到电脑上，请将它们全部复制回 SD 卡 + +OS X Yosemite （10.10） 及更早版本 + +1. 将你的 SD 卡插入到电脑 +1. 如果 SD 卡上有一些文件或文件夹，请将它们全部复制到你的电脑上 +1. 运行磁盘工具（Disk Utility） +1. 在左侧面板中选择你的 SD 卡 + + 请确保你选对了驱动器，否则你可能会把别的驱动器格式化了！ + {: .notice--danger} + +1. 点击顶部的“分区（Partition）” + + 如果“分区（Partition）”不显示，请确保你选择的是驱动器而不是一个分区 +1. 确保“分区布局（Partition Layout）”设置为“1 分区（1 Partition）” +1. 在“名称（Name）”一行随便输入一些内容 +1. 确保“格式（Format）”设置为 “MS-DOS (FAT)” +1. 点击分区表下面的“选项（Options）” +1. 选择“主启动记录（Master Boot Record）” +1. 点击“确定（OK）” +1. 点击“应用（Apply）” +1. 点击“分区（Partition）” +1. 等待格式化完成 +1. 关闭磁盘工具 +1. 如果先前你从 SD 卡上复制了一些文件或文件夹到电脑上，请将它们全部复制回 SD 卡 diff --git a/_pages/zh_CN/formatting-sd-(windows).txt b/_pages/zh_CN/formatting-sd-(windows).txt new file mode 100644 index 0000000000..3f1edcf25e --- /dev/null +++ b/_pages/zh_CN/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "格式化 SD 卡（通过 Windows 操作系统）" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +这是一个适用于为 3DS 准备的 SD 卡的格式化教程。 + +如果 3DS 已经识别到了 SD 卡，那么就不需要做这个教程了。 + +本节教程仅限 Windows 用户。 如果你没有在用 Windows，那么请看看[格式化 SD 卡（通过 Linux 操作系统）](formatting-sd-(linux))或[格式化 SD 卡（通过 Mac 操作系统）](formatting-sd-(mac)) 。 + +### 你需要准备点啥？ + +* 最新版 [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### 操作步骤 + +1. 将你的 SD 卡插入到电脑 +1. 如果 SD 卡上有一些文件或文件夹，请将它们全部复制到你的电脑上 +1. 运行 `guiformat.exe` +1. 在“Drive”一行选择你的 SD 卡盘符 + + 请确保你选对了驱动器盘符，否则你可能会把别的驱动器格式化了！ + {: .notice--danger} + +1. 在“Allocation unit size”选择一个大小 + + 如果 SD 卡的容量在 64GB 及以下，请选择 32768 + * 如果 SD 卡容量高于 64GB，请选择 65536 +1. 在“Volume label”一行随便输入一些东西 +1. 确保“Quick Format”被勾选 +1. 点击“Start” +1. 点击“OK” +1. 等待格式化完成 +1. 点击“Close” +1. 如果先前你从 SD 卡上复制了一些文件或文件夹到电脑上，请将它们全部复制回 SD 卡 + +### 常见错误 + +* Failed to open device: GetLastError()=32 + + 关闭任何可能会使用到 SD 卡的东西，例如资源管理器窗口。 diff --git a/_pages/zh_CN/get-started-(new-3ds).txt b/_pages/zh_CN/get-started-(new-3ds).txt index 07435110e6..4667b24b75 100644 --- a/_pages/zh_CN/get-started-(new-3ds).txt +++ b/_pages/zh_CN/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "Get Started (New 3DS)" +title: "新手入门（New 3DS）" --- -{% include toc title="Table of Contents" %} +{% include toc title="目录内容" %} -### Required Reading +### 必读事项 -请在下表中按照你的系统版本选择对应的页面。 Note that the "from" and "to" fields are inclusive. 举个例子，“从9.0.0到9.2.0”这一行包括9.0.0，9.1.0，和9.2.0。 +请在下表中按照你的系统版本选择对应的页面。 需要注意的是，下文中所述 “从” 和 “到” 的版本号之间的任何版本均在适用范围。 -Additionally, note that the last number of your system version (which is preceded by a dash) refers to your browser version. Currently, the browser version is irrelevant to the New 3DS in this guide. - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -你可以在系统设置中上屏的右下角找到你的设备版本号。 +你可以在系统设置中上屏的右下角找到你的主机版本号。 ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} -### Version Table +我们现在相信自制固件可以安全地联网了，不过仍然要提一下：过去的联网封禁大多数是因为作弊和可疑的 eShop 行为造成的。 +{: .notice--warning} + +### 版本列表 - + - - - + + + - - - - - - - - - - - + - + - + - - + + - - - + + - - + +
FromTo从到使用方法
2.1.02.1.0Installing boot9strap (2xrsa)
8.1.08.1.0Installing boot9strap (Soundhax)
9.0.01.0.0 11.3.0Homebrew Launcher (Soundhax)安装 boot9strap（通过Soundhax）
11.4.011.7.0Use an "All Versions" Method11.13.0安装 boot9strap（通过 SSLoth-Browser）
11.8.011.8.0Installing boot9strap (DSiWare)11.14.0（最新版）安装boot9strap（通过浏览器）
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

所有版本

安装 bootstrap（通过 ntrboot）
（需要一块兼容的烧录卡）

或

安装 boot9strap（通过硬改）
（需要焊接技术）
diff --git a/_pages/zh_CN/get-started-(old-3ds).txt b/_pages/zh_CN/get-started-(old-3ds).txt index b0561ae6d0..1bb2927d15 100644 --- a/_pages/zh_CN/get-started-(old-3ds).txt +++ b/_pages/zh_CN/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "Get Started (Old 3DS)" +title: "新手入门（旧版 3DS）" --- -{% include toc title="Table of Contents" %} +{% include toc title="目录内容" %} -### Required Reading +### 必读事项 -请在下表中按照你的系统版本选择对应的页面。 Note that the "from" and "to" fields are inclusive. 也就是说，举个例子“从9.0.0到9.2.0”这一行表示9.0.0，9.1.0，和9.2.0。 +请在下表中按照你的系统版本选择对应的页面。 需要注意的是，下文中所述 “从” 和 “到” 的版本号之间的任何版本均在适用范围。 -Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). 如果版本号以0结尾，则说明没有浏览器，如果大于0则表示浏览器已经安装。 - -例如，如果系统版本为“5.0.0-0U”，你需要定位到“无浏览器”这一列和“从5.0.0到5.1.0”这一行，因为系统版本在那个范围内并且无浏览器 。 - -**If you are unable to follow the instructions corresponding to your specific version due to missing prerequisites, then you should see the "All Versions" row for methods that work regardless of system version.** - -For all versions you can also [Cartridge Update](cart-update) (or use a standard system update) to get to a higher version in the same column to follow its instructions. - -Your device version can be found at the bottom right of the top screen of the System Settings. +你可以在系统设置中上屏的右下角找到你的主机版本号。 ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +我们现在相信自制固件可以安全地联网了，不过仍然要提一下：过去的联网封禁大多数是因为作弊和可疑的 eShop 行为造成的。 +{: .notice--warning} + ### 版本列表 @@ -33,49 +28,23 @@ Your device version can be found at the bottom right of the top screen of the Sy - - + - - - - - - - - - - - - - - - - - - - - - - - + + + - - + + - - - - - - - + + -
从 到无浏览器浏览器使用方法
1.0.02.0.0Use an "All Versions" Method
2.1.02.1.0Use an "All Versions" MethodInstalling boot9strap (2xrsa)
2.2.02.2.0Use an "All Versions" Method
3.0.08.1.0Installing boot9strap (Soundhax)
9.0.0 11.3.0Homebrew Launcher (Soundhax)
安装 boot9strap（通过Soundhax）
11.4.011.7.0Use an "All Versions" Method11.14.0安装 boot9strap（通过 safecerthax）
11.8.011.8.0Installing boot9strap (DSiWare)
ALL VERSIONS

ntrboot
(Requires a Compatible Flashcart)

or

Installing boot9strap (Hardmod)
(Requires Soldering)

所有版本

安装 bootstrap（通过 ntrboot）
（需要一块兼容的烧录卡）

或

安装 boot9strap（通过硬改）
（需要焊接技术）
\ No newline at end of file + diff --git a/_pages/zh_CN/get-started.txt b/_pages/zh_CN/get-started.txt index a323c6beab..1523a6fd1c 100644 --- a/_pages/zh_CN/get-started.txt +++ b/_pages/zh_CN/get-started.txt @@ -6,85 +6,16 @@ title: "新手入门" ### 必读事项 -请在下表中按照你的系统版本选择对应的页面。 需要注意的是，下文中所述 “从” 和 “到” 的版本号之间的任何版本均在适用范围。 举个例子：“从 9.0.0 到 9.2.0 ”表示 9.0.0， 9.1.0，和 9.2.0。 - -你可以在系统设置中上屏的右下角找到你的主机版本号。 - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**如果你因缺少某些先决条件而无法使用对应你系统版本的破解方法，那么请更新至最新的系统版本或看表格中适用于任意系统的“所有版本”行。** - -所有版本都可以通过[卡带升级](cart-update)或正常系统更新到更高版本并使用对应版本的方法步骤。 - -如果你已经破解过你的 3DS，并安装了基于 EmuNAND 的自制系统，那么请切换到 SysNAND 上进行本教程的所有操作。 替换所有已存在的文件。 你的数据将在最后从 EmuNAND 迁移到新的 B9S 系统上。 如果你现在使用的是 menuhax（主题破解），你应该在开始前先[清除主菜单外存](troubleshooting#clear-home-menu-extdata) 。 - -本页面将指导你安装 boot9strap 至**原厂尚未破解**的 3DS 或 2DS 上。 如果你已经安装了 arm9loaderhax，并想要升级到 boot9strap，请参考 [A9LH 升级 B9S](a9lh-to-b9s)。 -{: .notice--primary} - -开始前，windows用户需要开启[显示文件后辍](file-extensions-(windows)) 选项！ -{: .notice--info} - -开始之前，如果你想检测一下 SD 卡是否有错误，那么你可以使用 [H2testw (Windows)](h2testw-(windows))，[F3 (Linux)](f3-(linux)) 或 [F3X (Mac)](f3x-(mac))。 +如果你先前已经破解了 3DS 或你的 3DS 是二手的，则有可能你的主机已经在运行自制固件了。 你应该在继续操作前[检查一下](checking-for-cfw)。 {: .notice--warning} -{% capture notice-1 %} -虽然我们认为在此时破解是很安全的一件事，但这并不代表“永远不会受到封禁”。 +不同的机型、系统版本和区域需要不同的步骤以实现基于 boot9strap 驱动的自制固件。 下面的一系列页面将会帮助你针对你的设备找到适合的开始方案。 -如果你要防止封禁，则你应该避免做以下事： -1. 玩盗版 -1. 在联机游戏中作弊 -1. 在 eShop 上做可疑的动作（例如使用信用卡退款） +图片中机器的颜色可能会不同，不过这不是重点。请特别关注按键的布局和每台机器的特点，以确保你选择了正确的机型。 -我们认为目前悄然连接（SpotPass）和擦肩通信（StreetPass）功能也不会受到影响了。 -{% endcapture %} +请点击对应你设备的图片，进入相应的教程页面。 -
{{ notice-1 | markdownify }}
- -### 版本列表 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
从到使用方法
1.0.02.0.0升级至最新版本或使用“所有版本”方法
2.1.08.1.0安装 boot9strap（通过Soundhax）
9.0.011.3.0启动 Homebrew Launcher（通过 Soundhax）
11.4.011.12.0升级至最新版本或使用“所有版本”方法
11.13.011.13.0启动 Homebrew Launcher （通过浏览器破解 2020 版）
所有版本

安装 bootstrap（通过 ntrboot）
（需要一块兼容的烧录卡）

或

安装 boot9strap（通过硬改）
（需要焊接技术）

+| New 3DS 或 New 2DS | 旧版 3DS 或旧版 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/zh_CN/godmode9-usage.txt b/_pages/zh_CN/godmode9-usage.txt index d2f422f400..fe10c63065 100644 --- a/_pages/zh_CN/godmode9-usage.txt +++ b/_pages/zh_CN/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "GodMode9 使用教程" # {% include toc title="目录内容" %} -如果你想获得有关 GodMode9 的帮助、帮助编写脚本和获取更新及有关信息（英文），你可以加入 [GodMode9 Discord 服务器](https://discord.gg/EGu6Qxw)。（请注意，如果你身处中国大陆，访问 Discord 可能需要通过科学上网） +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### 必读事项 @@ -22,7 +22,7 @@ GodMode9 几乎可以修改你主机上的任何东西。 虽然更改系统文 ### 你需要准备点啥？ -* v1.9.2pre1版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) ### 操作步骤 diff --git a/_pages/zh_CN/home.txt b/_pages/zh_CN/home.txt index b31455d07e..ba5e30b628 100644 --- a/_pages/zh_CN/home.txt +++ b/_pages/zh_CN/home.txt @@ -18,7 +18,7 @@ ___ {: .notice--warning} {% capture notice-1 %} -本教程 _仅_ 适用于零售版的3DS（市面上销售的；而非通过任天堂开发者计划获得的）！ +本教程**仅**适用于零售版的 3DS（市面上销售的；而非通过任天堂开发者计划获得的）！ 如果你的主机是开发版（代号“PANDA”）的，请参见 [Panda 3DS 破解手册](https://panda.hacks.guide)。 {% endcapture %} @@ -32,7 +32,7 @@ ___
{{ notice-1 | markdownify }}
-请帮帮我们来将[这些]({{ "rss.xml" | absolute_url }})种子做种！ +请帮帮我们把[这些]({{ "rss.xml" | absolute_url }})种子做种！ {: .notice--primary} ## 什么是自制程序？ @@ -63,7 +63,7 @@ Boot9strap 拥有许多其他自制固件所没有的优点，因此我们推荐 ## 我可以利用自制固件做什么？ + 跨区运行所有游戏卡带和 eShop 游戏 -+ 从社区[获取自制主题及启动画面](https://themeplaza.eu/)以自定义你的主菜单 ++ 从社区[获取自制主题及启动画面](https://themeplaza.art/)以个性化你的主菜单 + 使用金手指 + 进行游戏录像和程序截屏 + 备份、修改、或还原游戏的存档 @@ -78,11 +78,11 @@ Boot9strap 拥有许多其他自制固件所没有的优点，因此我们推荐 + **在开始之前，你要知道破解 3DS 的风险：每次你修改系统的时候，都有可能会使你的 3DS 不可恢复的变砖。 这种情况很少见，但仍然存在这样的可能性，所以请确保你完全按照本教程的指导进行操作。** + 如果你之前破解过你的 3DS 并安装了 EmuNAND，且想将原 EmuNAND 中的内容迁移到 SysNAND 中，请依操作进行，并在[完成安装](finalizing-setup)这一步中依照提示还原你的 EmuNAND。 -+ 此教程对所有区域且固件版本号小于等于 11.13.0 的 New 3DS、3DS、New 2DS 和 2DS 有效。 ++ 此教程适用于全区且系统版本为最新（11.14.0）的 New 3DS、旧版 3DS、New 2DS 和旧版 2DS。 + 如果一切顺利，在安装完自制系统后你不会丢失任何数据（包括游戏、NNID、存档等）。 + 在进行所有操作时请将主机充电，避免意外关机造成数据丢失或损坏！ + 你的 SD 卡的分区表格式必须是 [MBR，而不是 GPT](http://www.howtogeek.com/245610/)（原厂 SD 卡的分区表格式默认是 MBR）。 如果你想测试是否为 MBR 格式，那么，最简单的方法是将其插入 3DS。 如果 SD 卡能被读取，那么它的分区表格式就是 MBR。 -+ 如果你需要格式化一张新的 SD 卡，可以使用 [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm)，并将“分配单元大小（Allocation Unit Size）”设置为 32K (32768)。 +如果你想要使用一张全新的 SD 卡，那么你需要用一个工具将其格式化为 FAT32。例如：Windows 上的 [guiformat](formatting-sd-(windows))，Mac 上的 [Disk Utility](formatting-sd-(mac))，Linux 上的 [cfdisk](formatting-sd-(linux))。 + 老型号的 2DS 和 3DS 使用的系统软件几乎是一模一样的，New 2DS 和 New 3DS也是一样的道理。 任何 “老型号的 3DS” 的步骤也适用于“老型号 2DS”，任何 “New 3DS” 的步骤也适用于 “New 2DS”。 ___ diff --git a/_pages/zh_CN/homebrew-launcher-(alternatives).txt b/_pages/zh_CN/homebrew-launcher-(alternatives).txt index 7a52b4ff81..ef72d563ca 100644 --- a/_pages/zh_CN/homebrew-launcher-(alternatives).txt +++ b/_pages/zh_CN/homebrew-launcher-(alternatives).txt @@ -53,7 +53,7 @@ Homebrew Launcher 有许多不同的入口和启动方式。 | [supermysterychunkhax](https://smd.salthax.org/) | 《[*精灵宝可梦：超不可思议的迷宫*](https://amzn.to/2ebxZ75)》、
可以使用 Homebrew Launcher 的 3DS | 卡带 | New、老型号、2DS | 欧版、日版、美版 | 全部 | 从 9.0.0-X（美版／日版）／10.2.0-X（欧版）到11.0.0-X（包括） | | [freakyhax](http://plutooo.github.io/freakyhax/) | [*Freakyforms Deluxe*](https://amzn.to/2f6eHO7) | eShop, 卡带 | New、老型号、2DS | 欧版，美版，日版 | 全部 | 9.0.0-X 至 11.7.0-X | | [basehaxx](http://mrnbayoh.github.io/basehaxx/) | *《精灵宝可梦：[终极红宝石](https://amzn.to/2eRILNQ)/[始源蓝宝石](https://amzn.to/2ebGrmN)》*、
一台可以使用 Homebrew Launcher 的3DS | 卡带 | New、老型号、2DS | 欧版、日版、美版 | 1.0、1.4 | 从9.0.0-X 至 11.0.0-X（包括） | - | [BASICSploit](https://mrnbayoh.github.io/basicsploit/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | 新、老版本、2DS | 美版 | 3.2.1 | 从9.0.0-X到11.0.0-X（包括） | + | [BASICSploit](https://mrnbayoh.github.io/basicsploit/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | 新、旧版本、2DS | 美版 | 3.2.1 | 从9.0.0-X到11.0.0-X（包括） | | [smilehax](https://plutooo.github.io/smilehax/) | [*SmileBASIC*](https://www.nintendo.com/games/detail/eYURHNjVdfyrnA3OJGfmlMYIrJUzgOcv) | eShop | 新、老型号、2DS | 日版、美版 | 3.3.1 | 从9.0.0-X到11.0.0-X（包括） | | [stickerhax](https://github.com/yellows8/stickerhax) | 《[*纸片马里奥：超级贴纸*](https://amzn.to/2f6aDx8)》、
一台可以使用 Homebrew Launcher 的 3DS | eShop、卡带 | 新、老、2DS | 欧版、日版、韩版、美版 | 全部 | 9.0.0-X至11.3.0-X | | [Ninjhax 2](http://smealum.github.io/ninjhax2/) | 《[*方块忍者*](https://amzn.to/2eRI1by)》 | eShop，卡带 | New、老型号、2DS | 欧版、日版、美版 | 全部 | 9.0.0-X 至 11.7.0-X | diff --git a/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt b/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt index 602c4178b3..31859f89ec 100644 --- a/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "启动 Homebrew Launcher（通过 2020 版浏览器破解）" --- -{% include toc title="目录内容" %} - -### 必读事项 - -这种方法利用了 3DS 互联网浏览器的一些漏洞来启动 Homebrew Launcher。 - -### 兼容性测试 - -如果你要使用这个方法，你的主机必须要是与之兼容的区域，且浏览器版本匹配此方法。 - -你可以检查系统设置来获取详细信息。 - -1. 打开系统设置。 -1. 在上屏的右下角，你会看到一行记着你目前的系统版本的文字（如`11.13.0-45x`） - + 45 是你的浏览器版本，在 45 后面的一个字母是你主机的区域码。 - + 如果你的浏览器版本小于 45，则你需要进入系统设置中的本体更新（Software Update）来更新系统至最新版本。 - + E 代表欧版 - + U 代表美版 - + J 代表日版 - + 如果你主机的区域码是这三个以外的字母，则你的主机不兼容这个方法。 -1. 请记住你的区域码。 你之后会知道为什么需要这样做。 - -### 你需要准备点啥？ - -* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* 最新版的浏览器破解压缩文件 [[Old 3DS 请点击这里下载](https://github.com/zoogie/old-browserhax/releases/latest) / [New 3DS 请点击这里下载](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old 指的是你的主机机型。 如果你不确定你是哪一款机型，则你可以看看[这张图](https://3ds.eiphax.tech/pic/newold.png)。 -* 主机已连上 WiFI - -### 操作步骤 - -#### 第一步 — 准备工作 - -1. 将3DS关机，拔出SD卡 -1. 将 SD 卡插入电脑 -1. 从 Homebrew Launcher 发布页下载 `boot.3dsx`，然后复制到你 SD 卡的根目录。 - + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去 -1. 在 BowserHax 发布页下载的压缩文件中，打开对应你主机区域的文件夹 -1. 从那里复制 `3ds` 文件夹、`browserhax_hblauncher_ropbin_payload.bin` 和 `arm11code.bin` 到 SD 卡根目录 - + 你的 SD 卡根目录上现在应该有 `Nintendo 3DS` 文件夹、 `3ds` 文件夹和两个 `.bin` 文件了 - -#### 第二步 — 浏览器破解 - -1. 打开[这张图片](https://3ds.eiphax.tech/pic/hax.png) -1. 安全弹出 SD 卡并将其插回主机 -1. 打开你的主机，然后确认其已联上 WiFi。 -1. 在主菜单中，同时按下 L 键和 R 键 - + 这应该会打开一个二维码扫描器。 如果没有，那么接下来的 USM（破解的下一步）就没办法继续做下去了。 你需要使用[传统方法](legacy-methods) - + 如果你想手输链接，请在浏览器输入 `https://zoogie.github.io/web/nbhax/` -1. 使用二维码扫描器扫第1步打开的那个二维码 -1. 点击“PROCEED TO HAXX” -1. 等待该过程执行完成。 - + 如果黄屏了，请重启主机然后再试一次 -1. 如果漏洞成功执行，你的设备将进入到 Homebrew Launcher - + 你可能会看到一个没有可用的应用程序的错误信息。 这种情况下请无视并继续下一步。 -1. 保持主机开启，然后继续下一部分。 - - -___ - -### 继续至[安装 boot9strap（通过 HBL-USM）](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +此页面由于使用的方法已经过时而被移除。 请回到[新手入门](get-started)使用较新的方法代替本教程。 +{: .notice--warning} diff --git a/_pages/zh_CN/homebrew-launcher-(pichaxx).txt b/_pages/zh_CN/homebrew-launcher-(pichaxx).txt index f07049a414..d150523172 100644 --- a/_pages/zh_CN/homebrew-launcher-(pichaxx).txt +++ b/_pages/zh_CN/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "启动Homebrew Launcher （通过 PicHaxx）" {% include toc title="目录内容" %} +基于 Seedminer 的方法已被更简单且更安全的方法取代。 除非你有原因（如肩键损坏）而不得不使用本教程，请回到[新手入门(get-started)查阅新的方法。 +{: .notice--warning} + ### 必读事项 本章节 Seedminer 将使用你的 `movable.sed` 文件，通过 PicHaxx 漏洞启动 Homebrew Launcher，以便在 DS Download Play 中注入修改后的 DSiWare 程序。 在进行本教程前，你必须先拥有 （或下载） eShop 中的免费的“精灵宝可梦：绘图方块（Pokemon Picross）”游戏。 -如果你的设备已通过如 pichaxx 或其他漏洞启动 Homebrew Launcher，那么你可以跳至 [DSiWare Dumper](dsidumper)。 +如果你的设备已通过如 Pichaxx 或其他漏洞启动 Homebrew Launcher，那么你可以跳至[安装 Boot9strap (通过 Frogtool)](installing-boot9strap-(frogtool))。 {: .notice--success} 如果你之前已经拥有了“精灵宝可梦：绘图方块”游戏，教程中将会覆盖你的游戏存档！ @@ -19,26 +22,27 @@ title: "启动Homebrew Launcher （通过 PicHaxx）" * 来自 eShop 的免费游戏 “精灵宝可梦：绘图方块(Pokemon Picross)” * 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 * 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *（根据你的 3DS 的区域和版本下载）* +* [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *（根据你的 3DS 的区域、型号和版本下载）* + + 如果你当前的系统版本是 11.14.0-46，你可以选择 11.13.0-45 然后下载 ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 复制 `boot.3dsx` 到你的 SD 卡根目录 1. 将下载的 otherapp payload 复制到 SD 卡的根目录下，并重命名为 `otherapp.bin` - + 如果你看不到 otherapp payload 的 `.bin` 扩展名，则请重命名为 `otherapp` + + 如果你没看到 `.bin` 后缀，则请不要不要不要手动加上 `.bin` 后缀 1. 检查 SD 卡的根目录是否存在一个名为 `3ds` 的文件夹，如果没有则手动新建一个 -#### 第二步 — PicHaxx +#### 第二步 – PicHaxx -1. 在你的电脑上打开 [PicHaxx 注入器网页](https://seedminer.hacks.guide/pichaxx/) +1. 在你的电脑上打开 [PicHaxx 注入器网页](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) 1. 上传你的 `movable.sed` 文件 1. 选择 “构建并下载（Build and Download）” 1. 等待该过程执行完成。 1. 打开你 SD 卡的 `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` 文件夹 + 这个 `` 和你在 [Seedminer](seedminer) 章节中打开的一样 - + 这个 `` 文件夹是 `` 文件夹中的另一个 32 个字符与数字混合的文件夹 + + `` 是一个在 `` 文件夹内，另一个 32 位字符长的文件夹 1. 复制你刚下载的 `00000001.sav` 文件到 `data` 文件夹 + 当提示时选择覆盖旧的文件 1. 将 SD 卡重新插入你的主机 @@ -46,7 +50,7 @@ title: "启动Homebrew Launcher （通过 PicHaxx）" 1. 启动“精灵宝可梦：绘图方块(Pokemon Picross)” 1. 如果漏洞成功执行，你的设备将进入到 Homebrew Launcher + 你可能会看到一个没有可用的应用程序的错误信息。 -1. 将设备关机。 +1. 将设备关机 ___ diff --git a/_pages/zh_CN/homebrew-launcher-(soundhax).txt b/_pages/zh_CN/homebrew-launcher-(soundhax).txt index 4f45923305..bf3688e8cc 100644 --- a/_pages/zh_CN/homebrew-launcher-(soundhax).txt +++ b/_pages/zh_CN/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Soundhax（与 Homebrew Launcher 一起使用时）与欧版、日版、韩版 注意：卡带升级只会更新系统核心组件，如系统设置和桌面菜单等等。 卡带升级不会更新 3DS 的音乐播放器与网络相关的组件，如系统迁移，互联网浏览器， StreetPass Mii 广场和 eShop。 -这也就是说，如果系统本身就安装有旧版本的“任天堂 3DS 音乐（Nintendo 3DS Sound）”程序**（低于3.0.0的版本）**且通过含有新版此程序的卡带进行更新，将导致 Soundhax 漏洞无法正常使用！ 你需要用[其他方法](homebrew-launcher-(alternatives))来进入 Homebrew Launcher！ +这也就是说，如果系统本身就安装有旧版本的“任天堂 3DS 音乐（Nintendo 3DS Sound）”程序*（低于2.1.0的版本）*且通过含有新版此程序的卡带进行更新，将导致 Soundhax 漏洞无法正常使用！ 你需要用[其他方法](homebrew-launcher-(alternatives))来进入 Homebrew Launcher！ {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ Soundhax（与 Homebrew Launcher 一起使用时）与欧版、日版、韩版 ### 你需要准备点啥？ * 最新版 [Soundhax](http://soundhax.com/) **（根据你的 3DS 的区域、型号和版本下载）** + + 如果点击下载 Soundhax 后浏览器跳转到了一个不可播放的视频，那么请按 Ctrl+S 或 Cmd+S 键将其保存到你的电脑上 * 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** * 最新版 [safehax](https://github.com/TiniVi/safehax/releases/latest) **（下载 `.3dsx` 文件）** * 最新版 [udsploit](https://github.com/smealum/udsploit/releases/latest) -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* [otherapp payload](https://smealum.github.io/3ds/#otherapp) **（根据你的 3DS 的区域和版本下载）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* [otherapp payload](https://smealum.github.io/3ds/#otherapp) **（根据你的 3DS 的区域、设备型号和版本下载）** ### 操作步骤 diff --git a/_pages/zh_CN/homebrew-launcher-(steelhax).txt b/_pages/zh_CN/homebrew-launcher-(steelhax).txt index 98930467f2..c28b25ddbe 100644 --- a/_pages/zh_CN/homebrew-launcher-(steelhax).txt +++ b/_pages/zh_CN/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "启动 Homebrew Launcher（通过 Steelhax）" --- -{% include toc title="目录内容" %} - -### 必读事项 - -Seedminer 将使用你的 `movable.sed` 文件，通过 Steelhax 漏洞启动 Homebrew Launcher，以便在 DS Download Play 中注入修改后的 DSiWare 程序。 在进行本教程前，你必须先拥有（或下载）eShop 中免费的“Steel Driver: Sub Wars”游戏。 - -如果你的设备已通过如 Steelhax 或其他漏洞启动 Homebrew Launcher，那么你可以跳至 [DSiWare Dumper](dsidumper)。 -{: .notice--success} - -如果你之前已经拥有了 “Steel Diver: Sub Wars” 游戏，本教程将会覆盖你的游戏存档！ +此页面由于使用的方法已经过时而被移除。 请回到[新手入门](get-started)使用较新的方法代替本教程。 {: .notice--warning} - -### 你需要准备点啥？ - -* eShop中免费的 “Steel Diver: Sub Wars” 游戏 -* 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 -* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* 最新版 [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *（根据你的 3DS 的区域和版本下载）* - -### 操作步骤 - -#### 第一步 — 准备工作 - -1. 检查 SD 卡的根目录是否存在一个名为 `3ds` 的文件夹，如果没有则手动新建一个 -1. 复制 `boot.3dsx` 到你的 SD 卡根目录 -1. 从 `Steelhax-release.zip` 中解压 `steelhax` 文件夹到你 SD 卡的根目录 -1. 将 otherapp payload 复制到你 SD 卡的 `steelhax` 文件夹，并重命名为 `payload.bin` - -#### 第二步 — Steelminer - -1. 将 SD 卡插入设备 -1. 启动 “Steel Diver: Sub Wars” 游戏一次，然后选择任意一个 Mii 来初始化存档 - + 请在提示游戏更新时拒绝更新游戏 - + 如果你已经更新了游戏，那么进入 “系统设置（System Settings）” -> “数据管理（Data Management menu）” 删除此游戏的更新补丁 -1. 关闭 “Steel Diver: Sub Wars” -1. 将设备关机 -1. 将你的 SD 卡插入到电脑 -1. 在你的电脑上打开 [Steelminer 注入器网页](https://seedminer.hacks.guide/steelhax/) -1. 上传你的 `movable.sed` 文件 -1. 选择 “Start!” -1. 等待该过程执行完成。 -1. 打开你 SD 卡的 `Nintendo 3DS` -> `` -> `<32位字符ID>` -> `title` -> `00040000` -> `<8位区码ID>` -> `data` 文件夹 - + **欧版**: `000d7e00` - + **日版**: `000d7c00` - + **美版**: `000d7d00` -1. 复制你刚下载的文件到 `data` 文件夹 - + 当提示时选择覆盖旧的文件 -1. 将 SD 卡重新插入你的主机 -1. 启动你的主机 -1. 启动 “Steel Diver: Sub Wars” -1. 如果漏洞成功执行，你的设备将进入到 Homebrew Launcher - + 你可能会看到一个没有可用的应用程序的错误信息。 -1. 将设备关机。 - -___ - -### 继续至 [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/zh_CN/installing-boot9strap-(2xrsa).txt b/_pages/zh_CN/installing-boot9strap-(2xrsa).txt index 0cf33849c6..afad9192b7 100644 --- a/_pages/zh_CN/installing-boot9strap-(2xrsa).txt +++ b/_pages/zh_CN/installing-boot9strap-(2xrsa).txt @@ -12,7 +12,7 @@ title: "安装 boot9strap（通过 2xrsa）" ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将你的 SD 卡插入到电脑 @@ -27,7 +27,7 @@ title: "安装 boot9strap（通过 2xrsa）" 1. 将 SD 卡重新插入你的主机 1. 启动你的主机 -#### 第二步 — 启动 SafeB9SInstaller +#### 第二步 – 启动 SafeB9SInstaller 1. 启动浏览器，并打开下面的网址 + `http://2xrsa.hacks.guide` @@ -37,13 +37,13 @@ title: "安装 boot9strap（通过 2xrsa）" + 如果你遇到其他错误， [请参考此故障排查章节](troubleshooting#a-browser-based-exploit-is-not-working) 1. 如果一切成功的话，你将自动进入 SafeB9SInstaller -#### 第三步 — 安装 boot9strap +#### 第三步 – 安装 boot9strap 1. 等待所有安全检查完成 1. 出现提示时，按照提示输入按键组合来安装boot9strap 1. 安装完成后，按下 “A” 键重启设备 -#### 第四步 — 设置 Luma3DS +#### 第四步 – 设置 Luma3DS 1. 你的设备应该在重新启动后进入了 Luma3DS 配置菜单 + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/zh_CN/installing-boot9strap-(browser).txt b/_pages/zh_CN/installing-boot9strap-(browser).txt index 8620120a00..5e5e5fb330 100644 --- a/_pages/zh_CN/installing-boot9strap-(browser).txt +++ b/_pages/zh_CN/installing-boot9strap-(browser).txt @@ -4,53 +4,57 @@ title: "安装 boot9strap（通过浏览器）" {% include toc title="目录内容" %} +### 必读事项 + +new-browserhax-xl（与 universal-otherapp 一起使用时）兼容所有区域的 11.14.0 New 3DS 和 New 2DS。 + +此漏洞无法用于旧版 3DS、旧版 3DS XL 或旧版 2DS XL。 请确保你准备破解的主机是 New 3DS、 New 3DS XL 或 New 2DS 中的一种型号后再继续教程。 +{: .notice--info} + ### 你需要准备点啥？ +* 最新版 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 关闭你的设备的电源 1. 将 SD 卡插入电脑 +1. 复制 `otherapp.bin` 到你 SD 卡的根目录下，然后重命名为 `arm11code.bin` + + 如果你没看到 `.bin` 后缀，则请不要不要不要手动加上 `.bin` 后缀 1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹 -1. 从 boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你 SD 卡的 `/boot9strap/` 文件夹中 -1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.dat` 和 `Launcher.dat` 到 SD 卡根目录下 - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. 从boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你 SD 卡的 `boot9strap` 文件夹中 +1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到 SD 卡根目录下 1. 将 SD 卡重新插入你的设备 1. 启动你的主机 -#### 第二步 — 启动 SafeB9SInstaller +#### 第二步 – 启动 SafeB9SInstaller -1. 启动浏览器，并打开下列网址中的一个 - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + 如果第一个网址用不了，把剩下的都试一下（有些机器用不了第一个网址，有些用不了后两个） +1. 启动你的主机 +1. 在主菜单中，同时按下 L 和 R 键来打开摄像头 + + 如果你无法打开摄像头，请直接进入 3DS 自带的浏览器然后输入 URL 访问（`https://zoogie.github.io/web/nbhax-xl/`） +1. 扫描[这个二维码（点击这里查看）](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + 如果出现错误，参见[此故障排查章节](troubleshooting#a-browser-based-exploit-is-not-working) 1. 如果一切成功的话，你将自动进入 SafeB9SInstaller -#### 第三步 — 安装 boot9strap +#### 第三步 – 安装 boot9strap 1. 等待所有安全检查完成 1. 出现提示时，按照提示输入按键组合来安装boot9strap 1. 安装完成后，按下 “A” 键重启设备 -#### 第四步 — 设置 Luma3DS +#### 第四步 – 设置 Luma3DS 1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) 1. 使用方向键和 “A” 键来启用以下设置： + **“Show NAND or user string in System Settings”** 1. 按下 “Start” 键保存设置并重启 - + 如果出现错误，继续至下一个页面即可解决 ___ diff --git a/_pages/zh_CN/installing-boot9strap-(fredtool).txt b/_pages/zh_CN/installing-boot9strap-(fredtool).txt index 9313e88671..6467f4c17e 100644 --- a/_pages/zh_CN/installing-boot9strap-(fredtool).txt +++ b/_pages/zh_CN/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "安装 Boot9strap（通过 Fredtool）" {% include toc title="目录内容" %} +基于 Seedminer 的方法已被更简单且更安全的方法取代。 除非你有原因（如肩键损坏）而不得不使用本教程，请回到[新手入门(get-started)查阅新的方法。 +{: .notice--warning} + ### 必读事项 本章节 Seedminer 将使用你的 `movable.sed` 文件来解密所有的 DSiWare 程序，以便在3DS中内置的 DS 网络设定中注入修改后的 DSiWare 程序。 这个操作需要你有任何的 DSiWare 备份，比如 BannerBomb 或 DSiWare Dumper 工具导出的。 @@ -12,13 +15,13 @@ title: "安装 Boot9strap（通过 Fredtool）" ### 你需要准备点啥？ -* 一个 DSiWare 备份 （例如从 [BannerBomb3](bannerbomb3) 或 [DSiWare Dumper](dsidumper)导出到 SD 卡根目录的） +* 一个 DSiWare 备份 （例如从 [BannerBomb3](bannerbomb3) 导出到 SD 卡根目录的） * 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 * 最新版 [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * 最新版 [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将你的 SD 卡插入到电脑 @@ -26,20 +29,20 @@ title: "安装 Boot9strap（通过 Fredtool）" 1. 复制 `boot.nds` （B9STool）到你的 SD 卡根目录 1. 从 Frogminer_save `.zip` 压缩包中复制 `private` 文件夹到内存卡的根目录 -#### 第二步 — Fredtool +#### 第二步 – Fredtool -1. 在电脑上打开 [Fredtool](https://fredtool.bruteforcemovable.com/) +1. 在你的电脑上打开 [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) 1. 在 “Your movable.sed” 栏上传你的 `movable.sed` 文件 1. 点击 “Your dsiware.bin”，然后选择你的 DSiWare 备份（`<八位字符ID>.bin`）上传 1. 完成谷歌的 “人机身份验证” （请注意，如果你身处中国大陆，看到这个选项可能需要科学上网） 1. 选择 “Start” 1. 等待该过程执行完成。 1. 等待程序自动完成后从站点下载修改后的 DSiware 文件 - + 这个文件包包含两个 dsiware 备份，一个是 clean（未修改），另一个是 hax （被打入漏洞的文件） + + 这个文件包含两个 DSiWare 备份，一个是 clean（未修改的原文件），另一个是 hax （被打入漏洞的文件） 1. 打开内存卡的 `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` 文件夹 - + 这个 `` 和你在 [Seedminer](seedminer) 章节中使用的一样 - + 这个 `` 文件夹是 `` 文件夹中的另一个 32 个字符与数字混合的文件夹 - + 如果没有 `Nintendo DSiWare` 文件夹，请在 `` 文件夹内创建它 + + 这个 `` 和你在 [Seedminer](seedminer) 章节中打开的一样 + + `` 是一个在 `` 文件夹内，另一个 32 位字符长的文件夹 + + 如果里面没有 `Nintendo DSiWare` 文件夹，请在 `` 文件夹内创建它 1. 从之前下载的 DSiWare 压缩包 （`fredtool_output.zip`） 里的 `output/hax/` 文件夹复制 `42383841.bin` 到 `Nintendo DSiWare` 文件夹 1. 将 SD 卡重新插入你的主机 1. 启动你的主机 @@ -51,7 +54,7 @@ title: "安装 Boot9strap（通过 Fredtool）" 1. 移动到 `“网络设置(Internet Settings)”` -> `“任天堂 DS 连接(Nintendo DS Connections)”`，然后选择 “OK” 1. 如果漏洞执行成功，你的设备将进入到日版的“うごくメモ帳 (Flipnote Studio)” -#### 第三步 — 触发 Flipnote 漏洞 +#### 第三步 – 触发 Flipnote 漏洞 如果你需要图片帮助，请点击 [这里](https://zoogie.github.io/web/flipnote_directions/)。 {: .notice--info} @@ -74,7 +77,7 @@ title: "安装 Boot9strap（通过 Fredtool）" + 你可能需要长按电源键强制关机 + 如果你看到了 Luma 的设置界面，请继续下面的操作而不用强制关机 -#### 第四步 — 设置 Luma3DS +#### 第四步 – 设置 Luma3DS 1. 开机时按住 “Select” 键，进入 Luma3DS 的配置菜单 + 如果你遇到了问题无法启动 Luma 配置菜单，[请参见此故障排查章节](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) @@ -83,11 +86,11 @@ title: "安装 Boot9strap（通过 Fredtool）" 1. 按下 “Start” 键保存设置并重启 + 你的主机应该在一会后加载到系统桌面。 如果你等了超过五分钟还是黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -#### 第五步 — 还原 “DS 连接设置（DS Connection Settings）” +#### 第五步 – 还原 “DS 连接设置（DS Connection Settings）” 1. 将设备关机 1. 将你的 SD 卡插入到电脑 -1. 从刚下载的压缩包（`fredtool_output.zip`）中的 `output/clean/` 文件夹复制出 `42383841.bin`，将其复制进你 SD 卡的 `Nintendo 3DS//<32位字符ID>/Nintendo DSiware/` 文件夹 +1. 从刚下载的压缩包（`fredtool_output.zip`）中的 `output/clean/` 文件夹复制出 `42383841.bin`，将其复制进你 SD 卡的 `Nintendo 3DS///Nintendo DSiware/` 文件夹 + 请替换现有的 `42383841.bin` 文件 1. 将SD卡重新插入你的主机 1. 启动你的主机 diff --git a/_pages/zh_CN/installing-boot9strap-(frogtool).txt b/_pages/zh_CN/installing-boot9strap-(frogtool).txt index bf1636f112..c4f61993f1 100644 --- a/_pages/zh_CN/installing-boot9strap-(frogtool).txt +++ b/_pages/zh_CN/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "安装 Boot9strap（通过 Frogtool）" {% include toc title="目录内容" %} +基于 Seedminer 的方法已被更简单且更安全的方法取代。 除非你有原因（如肩键损坏）而不得不使用本教程，请回到[新手入门(get-started)查阅新的方法。 +{: .notice--warning} + ### 必读事项 我们现在将通过 Homebrew Launcher 来启动 Frogtool 工具。此工具将把可利用漏洞的 “うごくメモ帳（Flipnote Studio）” 游戏注入到主机。之后我们将通过这个游戏的漏洞来启动 b9sTool 并通过其安装 boot9starp。 @@ -18,20 +21,20 @@ title: "安装 Boot9strap（通过 Frogtool）" * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * 最新版 [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * 最新版 [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将你的 SD 卡插入到电脑 1. 复制 `movable.sed` 文件到你的SD卡根目录 1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 -1. 从 b9sTool 的 release `.zip` 中复制 `boot.nds`（B9STool）到 SD 卡的根目录 +1. 从 b9sTool 的 release `.zip` 中复制 `boot.nds`（b9sTool）到 SD 卡的根目录 1. 复制 `Frogtool.3dsx` 到你 SD 卡的 `/3ds/` 文件夹中 1. 复制 `frogcert.bin` 到你的 SD 卡根目录 1. 将 SD 卡重新插入你的主机 1. 启动你的主机 -#### 第二步 — 修改“下载通信（DS Download Play）”程序 +#### 第二步 – 修改“下载通信（DS Download Play）”程序 1. 使用任何方法来启动 Homebrew Launcher 1. 从自制程序列表中找到并启动 Frogtool @@ -42,7 +45,7 @@ title: "安装 Boot9strap（通过 Frogtool）" 1. 一旦成功，点击一下屏幕，然后选择“BOOT patched DS Download Play” 1. 如果漏洞执行成功，你的设备将进入到日版的“うごくメモ帳 (Flipnote Studio)” -#### 第三步 — 触发 Flipnote 漏洞 +#### 第三步 – 触发 Flipnote 漏洞 如果你需要图片帮助，请点击[这里](https://OasisAkari.github.io/flipnote_directions/)。 {: .notice--info} @@ -65,7 +68,7 @@ title: "安装 Boot9strap（通过 Frogtool）" + 你可能需要长按电源键强制关机 + 如果你看到了 Luma 的设置界面，那么请继续下面的操作而不用强制关机 -#### 第四步 — 设置 Luma3DS +#### 第四步 – 设置 Luma3DS 1. 开机时按住 “Select” 键，进入 Luma3DS 的配置菜单 + 如果你遇到了问题无法启动 Luma 配置菜单，[请参见此故障排查章节](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md) @@ -74,6 +77,26 @@ title: "安装 Boot9strap（通过 Frogtool）" 1. 按下 “Start” 键保存设置并重启 + 你的主机应该在一会后加载到系统桌面。 如果你等了超过五分钟还是黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### 第五步 – 还原“下载通信（DS Download Play）”程序 + +1. 启动“下载通信(Download Play)”程序 (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. 等到你看到两个按钮 + + 不要按下任意一个按钮 +1. 同时按下 “L” + “↓” + “Select” 键来打开 Rosalina 菜单 +1. 选择 “Miscellaneous options” +1. 选择 “Switch the hb. title to the current app.” +1. 按 “B” 键继续 +1. 按 “B” 键返回 Rosalina 主菜单 +1. 按 “B” 键退出 Rosalina 菜单 +1. 按下 “Home” 键，然后关闭“下载通信(Download Play)” +1. 重新运行“下载通信（Download Play）”程序 +1. 此时你的主机应该会启动 Homebrew Launcher了 +1. 从自制程序列表中找到并启动 Frogtool +1. 选择 “RESTORE patched DS Download Play” 选项 +1. 一旦此操作完成后请仔细阅读屏幕，并检查是否成功 + + 如果提示了错误或者丢失文件，请更正问题并重试 +1. 如果操作成功执行，请点一下触摸屏，然后按 START 键退出 + ___ ### 继续至[完成安装](finalizing-setup) diff --git a/_pages/zh_CN/installing-boot9strap-(hardmod).txt b/_pages/zh_CN/installing-boot9strap-(hardmod).txt index ad35643237..4acc75aa6b 100644 --- a/_pages/zh_CN/installing-boot9strap-(hardmod).txt +++ b/_pages/zh_CN/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ title: "安装 boot9strap（通过硬改）" * 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** * 最新版 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows用户可以使用已编译的 “.exe” 程序，而 Mac 以及 Linux 用户则需要安装 [Python 3](https://www.python.org/downloads/) 来打开 “.py” 文件。 -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * 对应你的设备和系统的 “.firm” 文件： | 系统版本 | 内核版本 | 老型号 3DS 或 老型号 2DS | New 3DS 或 New 2DS | @@ -58,7 +58,7 @@ title: "安装 boot9strap（通过硬改）" ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将你的 SD 卡插入到电脑 @@ -71,7 +71,7 @@ title: "安装 boot9strap（通过硬改）" 1. 通过你的硬改创建一个新的 NAND 备份 1. 将你的 NAND 备份移动至你电脑中的 hardmod-b9s-installer 文件夹中，并将其重新命名为 `NAND.bin` -#### 第二步 — 安装 boot9strap +#### 第二步 – 安装 boot9strap 1. 启动 hardmod-b9s-installer + Windows用户：请运行 `install-b9s.exe` 程序 @@ -81,7 +81,7 @@ title: "安装 boot9strap（通过硬改）" 1. 移除你的硬改 1. 启动你的主机 -#### 第三步 — 设置 Luma3DS +#### 第三步 – 设置 Luma3DS 1. 你的设备应该会在重新启动后进入 Luma3DS 配置菜单 + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt index 406977a294..9ae8f92cf9 100644 --- a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt +++ b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "安装 boot9strap（通过 HBL-USM）" --- -{% include toc title="目录内容" %} - -### 必读事项 - -为了破解系统的 SAFE_MODE 固件，我们需要注入一个已被破解的 WiFi 配置文件到主机中。 - -现在我们能够进入 Homebrew 了，所以接下来我们会使用 slotTool 继续做下去。 - -你需要需要先做完 [2020 版浏览器破解步骤](homebrew-launcher-(browserhax-2020))才能打开 Homebrew Launcher。 - -如果你是通过其他方式进入 Homebrew Launcher 的，则你应该使用 [Frogtool](installing-boot9strap-(frogtool)) 而不是本方法。 - -一旦 WiFi 配置文件被注入，我们将会使用到 SAFE_MODE 来继续此教程。安全模式（SAVE MODE）是一个所有的 3DS 主机都存在的修复功能，之后它将被用于激活被破解的 WiFi 配置文件。 - -这些操作可在美、欧、日、韩版的主机上工作，你可通过系统版本号末尾的 U，E，J，K 字符来区分主机版本。 - -如果你的 L 键、R 键、↑ 键和 A 键中的其中一个按键坏了无法使用，则你只能使用[传统方法](legacy-methods)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 -{: .notice--danger} - -### 你需要准备点啥？ - -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* 最新版 [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### 第一步 — 准备工作 - -1. 你的主机现在应该在本教程的前一部分打开了 Homebrew Launcher 了 -1. 从自制程序列表中找到并启动 slotTool - + 如果你的主机卡在了红屏，请按住电源键 15 秒来强制关机，然后重试本步骤 -1. 选择 “INSTALL exploit to wifi slots 1,2,3 & shutdown” 选项 - + 你应该会看到屏幕上出现了一些文字，然后你的主机就关机了 -1. 从主机拔出 SD 卡，然后将其插入电脑 -1. 解压 Luma3DS `.zip` 内的 `boot.firm` 到你 SD 卡的根目录，请覆盖已有文件 -1. 从 unSAFE_MODE `.zip` 复制 `usm.bin` 到 SD 卡的根目录 -1. 将 SD 卡插回主机 - -#### 第二步 — unSAFE_MODE - -1. 将你的主机置于关机状态，按住 L + R + ↑ + A 按键，然后按下电源键 - + 按住这几个按钮，直到主机进入安全模式 -1. 点击 “OK” 来允许更新 - + 这个步骤实际上不存在更新。 这只是触发漏洞的一部分 -1. 点击 “I accept（我同意/同意する）” -1. 更新最终将失败，然后报出 `003-1099` 的错误。 这是剧本中的一部分 -1. 当系统问你“你想要配置互联网设置吗？（Would you like to configure Internet settings?）”时，点击 “Yes” -1. 在接下来出现的菜单中，移动至 `连接点 1（Connection 1）` -> `更改设置（Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy Settings）` -> `详细设置（Detailed Setup）` - + 这里有一份[演示图像](https://uwuu.ca/images/safemode_highlighted.png) -1. 然后你应该会看到上屏提示 `B9S install SUCCESS`，然后你就可以按下任意键重启到 Luma 设置了 - -#### 第三步 - 设置 Luma3DS - -1. 你的主机应该会自动进入到 Luma 配置菜单 -1. 使用方向键和 “A” 键来启用以下设置： - + **“Show NAND or user string in System Settings”** -1. 按下 “Start” 键保存设置并重启 - + 你的主机应该在一会后加载到系统桌面。 如果你等了超过五分钟还是黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### 第四步 — 还原 WiFi 配置文件 - -1. 运行“下载通信(Download Play)”程序 -1. 等到你看到两个按钮 - + 不要按下任意一个按钮 -1. 同时按下 “L” + “↓” + “Select” 键来打开 Rosalina 菜单 -1. 选择 “Miscellaneous options” -1. 选择 “Switch the hb. title to the current app.” -1. 按 “B” 键继续 -1. 按 “B” 键返回 Rosalina 主菜单 -1. 按 “B” 键退出 Rosalina 菜单 -1. 按下 “Home” 键，然后关闭“下载通信(Download Play)” -1. 重新运行“下载通信（Download Play）”程序 -1. 此时你的主机应该会启动 Homebrew Launcher了 -1. 从自制程序列表中找到并启动 slotTool -1. 选择“RESTORE original wifi slots 1,2,3” -1. 你的主机将会重启 - -___ - -### 继续至[完成安装](finalizing-setup) -{: .notice--primary} +此页面由于使用的方法已经过时而被移除。 请回到[新手入门](get-started)使用较新的方法代替本教程。 +{: .notice--warning} diff --git a/_pages/zh_CN/installing-boot9strap-(mset).txt b/_pages/zh_CN/installing-boot9strap-(mset).txt index 267f881e60..8f01ef66d6 100644 --- a/_pages/zh_CN/installing-boot9strap-(mset).txt +++ b/_pages/zh_CN/installing-boot9strap-(mset).txt @@ -13,7 +13,7 @@ title: "安装 boot9strap（通过 MSET）" ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 关闭你的设备 1. 将你的 SD 卡插入到电脑 @@ -29,7 +29,7 @@ title: "安装 boot9strap（通过 MSET）" 1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.nds` 到 DS 烧录卡中 1. 启动你的主机 -#### 第二步 — 启动 SafeB9SInstaller +#### 第二步 – 启动 SafeB9SInstaller 1. 从你的设备中启动你的 DS 烧录卡 1. 在烧录卡内启动 `SafeB9SInstaller.nds` @@ -39,13 +39,13 @@ title: "安装 boot9strap（通过 MSET）" 1. 重启主机，然后进入“系统设置（System Settings）”，然后是“其他设置（Other Settings）”，再然后是“个人资料（Profile）”，最后进入“任天堂 DS 个人资料（Nintendo DS Profile）” 1. 如果漏洞执行成功，你将会进入到 SafeB9SInstaller -#### 第三步 — 安装 boot9strap +#### 第三步 – 安装 boot9strap 1. 等待所有安全检查完成 1. 出现提示时，按照提示依次输入按键来确认安装 boot9starp 1. 安装完成后，按下 “A” 键重启设备 -#### 第四步 — 设置 Luma3DS +#### 第四步 – 设置 Luma3DS 1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt index 6871a932b7..6945a68d2d 100644 --- a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt @@ -13,28 +13,28 @@ title: "安装boot9strap (通过 ntrboot)" * 一块用来触发主机的休眠模式的磁铁（只适用于折叠式主机） * 一张已经写入 ntrboot 漏洞的烧录卡 * 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将你主机的 SD 卡插入你的电脑 + 这里指的是 3DS 的 SD 卡，**不**是烧录卡中的 SD 卡 -1. 复制 `SafeB9SInstaller.firm` 到 SD 卡的根目录，并重命名为 `boot.firm` -1. 解压 Luma3DS `.zip` 里的 `boot.3dsx` 到你 SD 卡的根目录 -1. 在SD卡根目录创建一个名为 `boot9strap` 的文件夹 -1. 从 boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你 SD 卡的 `/boot9strap/` 文件夹中 +1. 复制 `SafeB9SInstaller.firm` 到你主机 SD 卡的根目录，并重命名为 `boot.firm` +1. 解压 Luma3DS `.zip` 里的 `boot.3dsx` 到你主机 SD 卡的根目录 +1. 在你主机 SD 卡根目录创建一个名为 `boot9strap` 的文件夹 +1. 从boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你主机 SD 卡的 `/boot9strap/` 文件夹中 ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. 将SD卡重新插入你的主机 +1. 将你的 SD 卡插回 3DS 1. 启动你的主机 -#### 第二步 — 触发 ntrboot +#### 第二步 – 触发 ntrboot 1. 使用磁铁在主机上找到可以触发休眠模式的休眠感应器 + 老型号的 2DS 可以跳过此步（因为其有独立的休眠开关） @@ -46,7 +46,7 @@ title: "安装boot9strap (通过 ntrboot)" + 你可能要多试几次，因为这些组合键有点难按 1. 如果一切成功的话，你将自动进入 SafeB9SInstaller -#### 第三步 — 安装 boot9strap +#### 第三步 – 安装 boot9strap 1. 等待所有安全检查完成 1. 从你的主机上移开磁铁 @@ -55,12 +55,12 @@ title: "安装boot9strap (通过 ntrboot)" 1. 完成后，长按电源键强制关机 + 除非你完成下一节，否则你开机后只能进入 SafeB9SInstaller 中 -#### 第四步 — 设置 Luma3DS +#### 第四步 – 设置 Luma3DS 1. 将你的 SD 卡插入到电脑 1. 删除 SD 卡根目录下的 `boot.firm` 文件 1. 解压 Luma3DS `.zip` 里的 `boot.firm` 到你 SD 卡的根目录 -1. 将 SD 卡重新插入你的主机 +1. 将SD卡重新插入你的主机 1. 启动你的主机 1. 你的设备应该会在开机后进入 Luma3DS 配置菜单 + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) @@ -82,7 +82,7 @@ ___ 请不要在完成以上章节之前进行下面的操作。 -#### 第五步 — 移除 ntrboot +#### 第五步 – 移除 ntrboot ##### 你需要准备点啥？ @@ -127,7 +127,7 @@ ___ 1. 从烧录卡备份 `.zip` 压缩包中复制 `.bin` 文件到你的 SD 卡的 `/ntrboot/` 文件夹 1. 在SD卡的 `luma` 文件夹里创建 `payloads` 文件夹 1. 复制 `ntrboot_flasher.firm` 到 SD 卡的 `/luma/payloads/` 文件夹中 -1. 将SD卡重新插入你的主机 +1. 将 SD 卡重新插入你的主机 1. 把兼容 ntrboot 的 DS / DSi 烧录卡插入设备 1. 开机时按住 “Start” 键启动 ntrboot_flasher 1. 请仔细阅读警告信息 diff --git a/_pages/zh_CN/installing-boot9strap-(pichaxx).txt b/_pages/zh_CN/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..e85b6c5fe1 --- /dev/null +++ b/_pages/zh_CN/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,70 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="目录内容" %} + +基于 Seedminer 的方法已被更简单且更安全的方法取代。 除非你有原因（如肩键损坏）而不得不使用本教程，请回到[新手入门(get-started)查阅新的方法。 +{: .notice--warning} + +### 必读事项 + +此方法使用 Seedminer 来取得你的 `movable.sed` 文件进行更进一步的漏洞利用，将为宝可梦绘图方块（Pokémon Picross）自制的存档写入游戏，然后利用 universal-otherapp 启动 SafeB9SInstaller。 + +### 你需要准备点啥？ + +* 宝可梦绘图方块（Pokémon Picross）（可以在 + eShop 下载） +* 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 +* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* 最新版 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### 操作步骤 + +#### 第一步 – 准备工作 + +1. 将设备关机 +1. 将你的 SD 卡插入到电脑 +1. 复制 `otherapp.bin` 到你的 SD 卡根目录 +1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 +1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹 +1. 从 boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你 SD 卡的 `/boot9strap/` 文件夹中 +1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到 SD 卡根目录下 + +#### 第二步 – PicHaxx + +1. 在你的电脑上打开 [PicHaxx 注入器网页](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) +1. 上传你的 `movable.sed` 文件 +1. 选择 “构建并下载（Build and Download）” +1. 等待该过程执行完成。 +1. 打开你 SD 卡的 `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` 文件夹 + + 这个 `` 和你在 [Seedminer](seedminer) 章节中打开的一样 + + `` 是一个在 `` 文件夹内，另一个 32 位字符长的文件夹 +1. 复制你刚下载的 `00000001.sav` 文件到 `data` 文件夹 + + 当提示时选择覆盖旧的文件 +1. 将SD卡重新插入你的主机 +1. 启动你的主机 +1. 启动“精灵宝可梦：绘图方块(Pokemon Picross)” +1. 如果漏洞执行成功，你的主机将会进入到 SafeB9SInstaller + +#### 第三步 – 安装 boot9strap + +1. 等待所有安全检查完成 +1. 出现提示时，按照提示输入按键组合来安装boot9strap +1. 安装完成后，按下 “A” 键重启设备 + +#### 第四步 – 设置 Luma3DS + +1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. 使用方向键和 “A” 键来启用以下设置： + + **“Show NAND or user string in System Settings”** +1. 按下 “Start” 键保存设置并重启 + + 如果出现错误，继续至下一个页面即可解决 + +___ + +### 继续至[完成安装](finalizing-setup) +{: .notice--primary} diff --git a/_pages/zh_CN/installing-boot9strap-(safeb9sinstaller).txt b/_pages/zh_CN/installing-boot9strap-(safeb9sinstaller).txt index 817a66b531..485339d7cb 100644 --- a/_pages/zh_CN/installing-boot9strap-(safeb9sinstaller).txt +++ b/_pages/zh_CN/installing-boot9strap-(safeb9sinstaller).txt @@ -6,7 +6,7 @@ title: "安装 boot9strap（通过 SafeB9SInstaller）" ### 操作步骤 -#### 第一步 — 启动 SafeB9SInstaller +#### 第一步 – 启动 SafeB9SInstaller 1. 从自制程序列表中运行 udsploit 1. 当完成时，按下 “Start” 键退出 udsploit @@ -18,7 +18,7 @@ title: "安装 boot9strap（通过 SafeB9SInstaller）" + 如果设备死机了，请长按电源键关闭设备，然后再试一次 1. 如果一切成功的话，你将自动进入 SafeB9SInstaller -#### 第二步 — 安装 boot9strap +#### 第二步 – 安装 boot9strap 1. 等待所有安全检查完成 1. 出现提示时，按照提示输入按键组合来安装 boot9strap diff --git a/_pages/zh_CN/installing-boot9strap-(safecerthax).txt b/_pages/zh_CN/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..56cae67e10 --- /dev/null +++ b/_pages/zh_CN/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "安装 boot9strap（通过 safecerthax）" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +safecerthax 兼容所有区域的旧版 3DS 和旧版 2DS。 + +如果你的主机 L 键、R 键、↑ 键和 A 键有中一个坏了或者你的 ISP 篡改了 DNS 无法使用，则你只能使用替代方法，如 [Seedminer](seedminer)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 +{: .notice--warning} + +此漏洞无法用于 New 3DS、New 3DS XL 或 New 2DS XL。 请确保你准备破解的主机是旧版 3DS、旧版 3DS XL 或旧版 2DS 中的一种型号后再继续教程。 +{: .notice--info} + +### 你需要准备点啥？ + +* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### 操作步骤 + +#### 第一步 – 准备工作 +1. 将设备关机 +1. 将你的 SD 卡插入到电脑 +1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 +1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹 +1. 从boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你 SD 卡的 `boot9strap` 文件夹中 +1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到 SD 卡根目录下 +1. 将SD卡重新插入你的主机 +1. 启动你的主机 + +#### 第二步 – safecerthax DNS +1. 打开系统设置（本体設定 / System Settings） +1. 移动至 `互联网设置（インターネット設定 / Internet Settings）` -> `连接设置（インターネット接続設定 / Connection Settings）` +1. 点击你目前在用的连接点槽位，然后移动至 `设置变更（設定変更 / Change Settings）` -> `下一页（右箭头）` -> `DNS` +1. 设置“自动获取 DNS （DNS 自動取得 / Auto-Obtain DNS）”为“否（しない / No）”，然后点击`详细设置（詳細設定 / Detailed Setup）` +1. 设置主 DNS（プライマリ DNS / Primary DNS）和备用 DNS（セカンダリ DNS / Secondary DNS）为`054.038.133.070` +1. 点击 OK，然后点击保存（保存する / Save） +1. 当提示时，点击“测试（テスト / Test）”进行连接测试 + + 测试应该会成功 +1. 将设备关机 + +#### 第三步 – safecerthax +1. 将你的主机置于关机状态，按住 L + R + ↑ + A 按键，然后按下电源键 + + 按住这几个按钮，直到主机进入安全模式 +1. 点击 “OK” 来允许更新 + + 这个步骤实际上不存在更新。 这只是触发漏洞的一部分 +1. 点击 “I accept（我同意/同意する）” + + 更新应该会失败并出现错误信息 + + 如果升级没有失败，则说明你的 ISP 可能篡改了你的 DNS。 尝试换一个 Wifi，或者换另外一个方法 [Seedminer](seedminer)。 +1. 点击“OK”关闭错误信息 +1. 如果一切成功的话，你将自动进入 SafeB9SInstaller + + 如果主机死机或崩溃，请强制关闭主机，然后再试一次本步骤 + +#### 第四步 – 安装 boot9strap + +1. 等待所有安全检查完成 +1. 出现提示时，按照提示输入按键组合来安装boot9strap +1. 安装完成后，按下 “A” 键重启设备 + +#### 第五步 – 配置 Luma3DS + +1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. 使用方向键和 “A” 键来启用以下设置： + + **“Show NAND or user string in System Settings”** +1. 按下 “Start” 键保存设置并重启 + +#### 第六步 – 还原默认的 DNS +1. 打开系统设置（本体設定 / System Settings） +1. 移动至 `互联网设置（インターネット設定 / Internet Settings）` -> `连接设置（インターネット接続設定 / Connection Settings）` +1. 点击你目前在用的连接点槽位，然后移动至 `设置变更（設定変更 / Change Settings）` -> `下一页（右箭头）` -> `DNS` +1. 设置“自动获取 DNS （DNS 自動取得 / Auto-Obtain DNS）”为“是（する / Yes）” +1. 点击 OK，然后点击保存（保存する / Save） +1. 当提示时，点击“测试（テスト / Test）”进行连接测试 + + 测试应该会成功 +1. 将设备关机 + +___ + +### 继续至[完成安装](finalizing-setup) +{: .notice--primary} diff --git a/_pages/zh_CN/installing-boot9strap-(soundhax).txt b/_pages/zh_CN/installing-boot9strap-(soundhax).txt index 8c51b16488..60d52bb13c 100644 --- a/_pages/zh_CN/installing-boot9strap-(soundhax).txt +++ b/_pages/zh_CN/installing-boot9strap-(soundhax).txt @@ -6,43 +6,33 @@ title: "安装 boot9strap（通过 Soundhax）" ### 必读事项 -Soundhax（与 pre9otherapp 结合使用时）与欧版、日版、韩版和美版 2.1.0 至 8.1.0 系统版本的设备兼容。 - -{% capture notice-1 %} - -注意，卡带升级只会更新系统核心组件，如系统设置和桌面菜单等等。 卡带升级不会更新 3DS 的音乐播放器与网络相关的组件，如系统迁移，互联网浏览器， StreetPass Mii 广场和 eShop。 - -这也就是说，如果系统本身就安装有旧版本的“任天堂 3DS 音乐（Nintendo 3DS Sound）”程序*（低于2.1.0的版本）*且通过含有新版此程序的卡带进行更新，将导致 Soundhax 漏洞无法正常使用！ 你需要使用其他方法，如[安装 boot9strap（通过浏览器）](installing-boot9strap-(browser))或[安装 boot9strap（通过 MSET）](installing-boot9strap-(mset))来启动 Homebrew Launcher！ -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax（和 universal-otherapp 一起使用时）与所有区域 1.0.0 至 11.3.0 系统版本的设备兼容。 ### 你需要准备点啥？ * 最新版 [Soundhax](http://soundhax.com/) **（根据你的 3DS 的区域、型号和版本下载）** + + 如果点击下载 Soundhax 后浏览器跳转到了一个不可播放的视频，那么请按 Ctrl+S 或 Cmd+S 键将其保存到你的电脑上 * 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* 最新版 [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) **（下载对应你固件版本的 `.bin` 文件）** +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* 最新版 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将你的 SD 卡插入到电脑 1. 复制 Soundhax 的 `.m4a` 文件到你的 SD 卡根目录下 -1. 复制 pre9otherapp payload 到内存卡的根目录，并重命名为 `otherapp.bin` -1. 解压 Luma3DS `.zip` 里的 `boot.firm` 到你 SD 卡的根目录 -1. 复制 `boot.3dsx` 到你的 SD 卡根目录 +1. 复制 `otherapp.bin` 到你的 SD 卡根目录 +1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹 1. 从 boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你 SD 卡的 `/boot9strap/` 文件夹中 -1. 从 SafeBSInstaller 的 `.zip` 压缩包中复制 `arm9.bin` 到 SD 卡根目录下 +1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到 SD 卡根目录下 1. 将 SD 卡重新插入你的主机 1. 启动你的主机 -#### 第二步 — 启动 SafeB9SInstaller +#### 第二步 – 启动 SafeB9SInstaller 1. 将 SD 卡重新插入你的主机 1. 启动你的主机 @@ -62,13 +52,13 @@ Soundhax（与 pre9otherapp 结合使用时）与欧版、日版、韩版和美 1. 如果一切成功的话，你将自动进入 SafeB9SInstaller -#### 第三步 — 安装 boot9strap +#### 第三步 – 安装 boot9strap 1. 等待所有安全检查完成 1. 出现提示时，按照提示输入按键组合来安装boot9strap 1. 安装完成后，按下 “A” 键重启设备 -#### 第四步 — 设置 Luma3DS +#### 第四步 – 设置 Luma3DS 1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) diff --git a/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt b/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..d950516f80 --- /dev/null +++ b/_pages/zh_CN/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "安装 boot9strap（通过 SSLoth-浏览器破解）" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +SSLoth 允许目前系统版本在 11.13.0 及其以下的主机绕过浏览器版本检查，然后就可以使用到利用 universal-otherapp 的方法了，如 new-browserhax 或 old-browserhax + +如果你使用过卡带更新，则你的浏览器将无法打开。 如果是这样，则你需要通过系统更新将你的主机更新到最新版本，并按照最新版本的操作进行破解。 +{: .notice--warning} + +### 你需要准备点啥？ + +* 最新版 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### 第一步 – 准备工作 + +1. 将设备关机 +1. 将你的 SD 卡插入到电脑 +1. 复制 `otherapp.bin` 到你 SD 卡的根目录下，然后重命名为 `arm11code.bin` + + 如果你没看到 `.bin` 后缀，则请不要不要不要手动加上 `.bin` 后缀 +1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 +1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹 +1. 从boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你 SD 卡的 `boot9strap` 文件夹中 +1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到 SD 卡根目录下 +1. 将SD卡重新插入你的主机 +1. 启动你的主机 + +#### 第二步 – SSLoth +1. 打开系统设置（本体設定 / System Settings） +1. 移动至 `互联网设置（インターネット設定 / Internet Settings）` -> `连接设置（インターネット接続設定 / Connection Settings）` +1. 点击你目前在用的连接点槽位，然后移动至 `设置变更（設定変更 / Change Settings）` -> `下一页（右箭头）` -> `DNS` +1. 设置“自动获取 DNS （DNS 自動取得 / Auto-Obtain DNS）”为“否（しない / No）”，然后点击`详细设置（詳細設定 / Detailed Setup）` +1. 设置主 DNS（プライマリ DNS / Primary DNS）和备用 DNS（セカンダリ DNS / Secondary DNS）为`054.038.133.070` +1. 点击 OK，然后点击保存（保存する / Save） +1. 当提示时，点击“测试（テスト / Test）”进行连接测试 + + 测试应该会成功 +1. 将设备关机 + +#### 第三步 – 启动 SafeB9SInstaller +1. 启动你的主机 +1. 在主菜单中，同时按下 L 和 R 键来打开摄像头 + + 如果你无法打开摄像头，请直接进入 3DS 自带的浏览器然后输入 URL 访问（`https://zoogie.github.io/web/nbhax/`） +1. 扫描[这个二维码（点击这里查看）](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + 如果出现错误，参见[此故障排查章节](troubleshooting#a-browser-based-exploit-is-not-working) + + 浏览器提醒你升级系统，则说明你的 ISP 可能篡改了你的 DNS。 尝试换一个Wifi，或者更新你的主机到最新系统后使用 [安装 boot9strap（通过浏览器破解）](installing-boot9strap-(browser))。 +1. 如果一切成功的话，你将自动进入 SafeB9SInstaller + +#### 第四步 – 安装 boot9strap + +1. 等待所有安全检查完成 +1. 出现提示时，按照提示输入按键组合来安装boot9strap +1. 安装完成后，按下 “A” 键重启设备 + +#### 第五步 – 配置 Luma3DS + +1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中 + + 如果黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. 使用方向键和 “A” 键来启用以下设置： + + **“Show NAND or user string in System Settings”** +1. 按下 “Start” 键保存设置并重启 + +#### 第六步 – 还原默认的 DNS +1. 打开系统设置（本体設定 / System Settings） +1. 移动至 `互联网设置（インターネット設定 / Internet Settings）` -> `连接设置（インターネット接続設定 / Connection Settings）` +1. 点击你目前在用的连接点槽位，然后移动至 `设置变更（設定変更 / Change Settings）` -> `下一页（右箭头）` -> `DNS` +1. 设置“自动获取 DNS （DNS 自動取得 / Auto-Obtain DNS）”为“是（する / Yes）” +1. 点击 OK，然后点击保存（保存する / Save） +1. 当提示时，点击“测试（テスト / Test）”进行连接测试 + + 测试应该会成功 +1. 将设备关机 + +___ + +### 继续至[完成安装](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt index 5d6e462300..7f655771e4 100644 --- a/_pages/zh_CN/installing-boot9strap-(usm).txt +++ b/_pages/zh_CN/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "安装 boot9strap（通过 USM）" {% include toc title="目录内容" %} +基于 Seedminer 的方法已被更简单且更安全的方法取代。 除非你有原因而不得不使用本教程，请回到[新手入门(get-started)查阅新的方法。 +{: .notice--warning} + ### 必读事项 为了破解系统的 SAFE_MODE 固件，我们需要注入一个已被破解的 WiFi 配置文件到主机中。 @@ -16,33 +19,34 @@ title: "安装 boot9strap（通过 USM）" 这些操作可在美、欧、日、韩版的主机上工作，你可通过系统版本号末尾的 U，E，J，K 字符来区分主机版本。 -如果你的 L 键、R 键、↑ 键和 A 键中的其中一个按键坏了无法使用，则你只能使用[传统方法](legacy-methods)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 -{: .notice--danger} +如果你的 L 键、R 键、↑ 键和 A 键中的其中一个按键坏了无法使用，则你只能使用[传统方法](legacy-methods)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 +{: .notice--warning} ### 你需要准备点啥？ * 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件 -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 -1. 在你的电脑上打开 [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) - + 如果这个网站抛锚了，尝试[这个网站](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. 如果你的主机已经被你开机了，那么将其关机 +1. 在你的电脑上打开 [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) 1. 点击 “选择文件” 选项，然后选择你的 movable.sed 上传 1. 点击 “Download unSAFE_MODE-bb3 archive” - + 这将下载一个包含了名为 `F00D43D5.bin` 的已被破解的 DSiWare 备份和一个名为 `usm.bin` 的已被破解的 SAFE_MODE 存档文件的 zip 文件（`unSAFE_MODE-bb3.zip`）到你的电脑上 -1. 如果你的主机已经被你开机了，那么将其关机 + + 这将下载一个包含了名为 `F00D43D5.bin` 的已被破解的 DSiWare 备份，和一个名为 `usm.bin` 的已被破解的 SAFE_MODE 存档的 zip 文件（`unSAFE_MODE-bb3.zip`）到你的电脑上 1. 将你的 SD 卡插入到电脑 1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录 -1. 从 USM 压缩文件中（`unSAFE_MODE-bb3.zip`）解压 `usm.bin` 到你 SD 卡的根目录下 -1. 移动至 `Nintendo 3DS` -> `` -> `<32位字符ID>` -> `Nintendo DSiWare` 文件夹 - + 这个 `` 和你在 [Seedminer](seedminer) 章节中使用的一样 - + 如果没有 `Nintendo DSiWare` 文件夹，创建它 + + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去 +1. 从 `unSAFE_MODE-bb3.zip` 复制 `usm.bin` 到 SD 卡的根目录 +1. 打开内存卡的 `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` 文件夹 + + 这个 `` 和你在 [Seedminer](seedminer) 章节中打开的一样 + + `` 是一个在 `` 文件夹内，另一个 32 位字符长的文件夹 + + 如果里面没有 `Nintendo DSiWare` 文件夹，请在 `` 文件夹内创建它 1. 如果这文件夹中有其他的 DSiWare 备份文件 (`<8位字符id>.bin`)，将它们移动到你的电脑上备份 + 这文件夹应该会成为空文件夹。 将这些文件移动到电脑上备份可防止你删除了你有意保留的东西 -1. 从 USM 压缩文件中（`unSAFE_MODE-bb3.zip`）解压 `F00D43D5.bin` 到你 SD 卡的 `Nintendo DSiWare` 文件夹下 +1. 从 `unSAFE_MODE-bb3.zip` 压缩文件中解压 `F00D43D5.bin` 到你 SD 卡的 `Nintendo DSiWare` 文件夹下 -#### 第二步 — BannerBomb3 +#### 第二步 – BannerBomb3 1. 将SD卡重新插入你的主机 1. 启动你的主机 @@ -53,19 +57,20 @@ title: "安装 boot9strap（通过 USM）" + 如果你的主机下屏不会闪烁红色，则代表着漏洞配置文件未被复制，在完成复制之前你无法继续接下来的步骤。 请确保你的文件放置在正确的位置，然后重试 1. 将设备关机 -#### 第三步 — unSAFE_MODE +#### 第三步 – unSAFE_MODE 1. 将你的主机置于关机状态，按住 L + R + ↑ + A 按键，然后按下电源键 - + 按住几秒后再松手。 你的主机将会启动到安全模式 + + 按住这几个按钮，直到主机进入安全模式 1. 点击 “OK” 来允许更新 + 这个步骤实际上不存在更新。 这只是触发漏洞的一部分 1. 点击 “I accept（我同意/同意する）” 1. 更新最终将失败，然后报出 `003-1099` 的错误。 这是剧本中的一部分 1. 当系统问你“你想要配置互联网设置吗？（Would you like to configure Internet settings?）”时，点击 “Yes” 1. 在接下来出现的菜单中，移动至 `连接点 1（Connection 1）` -> `更改设置（Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy Settings）` -> `详细设置（Detailed Setup）` + + 这里有一份[演示图像](https://uwuu.ca/images/safemode_highlighted.png) 1. 然后你应该会看到上屏提示 `B9S install SUCCESS`，然后你就可以按下任意键重启到 Luma 设置了 -#### 第四步 — 设置 Luma3DS +#### 第四步 – 设置 Luma3DS 1. 你的主机应该会自动进入到 Luma 配置菜单 1. 使用方向键和 “A” 键来启用以下设置： @@ -73,18 +78,16 @@ title: "安装 boot9strap（通过 USM）" 1. 按下 “Start” 键保存设置并重启 + 你的主机应该在一会后加载到系统桌面。 如果你等了超过五分钟还是黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) -#### 第五步 — 还原 WiFi 配置文件 +#### 第五步 – 还原 WiFi 配置文件 1. 启动你主机上的 “系统设置(System settings)” 1. 移动至 `数据管理(Data Management)` -> `DSiWare` 1. 点击 SD 卡部分 + 你的主机下屏应该会开始绿色的闪烁，然后系统将会在稍后重启回到桌面中。 这意味着你的 WiFi 配置文件已成功恢复 -1. 关闭主机 +1. 将设备关机 1. 将你的 SD 卡插入到电脑 -1. 移动至 `Nintendo 3DS` -> `` -> `<32位字符ID>` -> `Nintendo DSiWare` 文件夹 - + 这个 `` 和你在 [Seedminer](seedminer) 章节中使用的一样 +1. 打开内存卡的 `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` 文件夹 1. 删除 Nintendo DSiWare 文件夹中的 `F00D43D5.bin` 文件 -1. 继续至完成安装 ___ diff --git a/_pages/zh_CN/legacy-methods.txt b/_pages/zh_CN/legacy-methods.txt index a3908d8c92..3d6132d0d3 100644 --- a/_pages/zh_CN/legacy-methods.txt +++ b/_pages/zh_CN/legacy-methods.txt @@ -8,17 +8,17 @@ title: "传统方法" 安装自制固件（CFW）在近期出现了许多的改进和进步的方法。 -为此，建议你在 [Get Started](get-started) 页面中查找并使用最新的方法。 +因此建议你使用[安装 boot9strap（通过 USM）](installing-boot9strap-(usm))所写的步骤来代替这些方法。 然而，由于某些情况这里仍然保留了一些“传统”或“过时”的方法。 你需要先完成 [Seedminer](seedminer) 部分。 -如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。 +如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 -#### 第一步 — 兼容性测试 +#### 第一步 – 兼容性测试 以下漏洞利用了内置在 3DS 中的两个 DS 模式应用程序之一：DS 互联网设置（DS Internet Settings）和 DS 下载通信（DS Download Play）。 -如果 DS 互联网设置和 DS 下载通信都无法正常启动，那么你必须使用能启动自制程序 [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) 的方法进行修复，比如 Pichaxx。 +如果 DS 互联网设置和 DS 下载通信都无法正常启动，那么你必须得使用能启动自制程序 [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) 的方法进行修复，比如 Pichaxx。 #### DS 网络设置测试（用于 Fredtool） @@ -38,9 +38,7 @@ title: "传统方法" ___ -1. [BB3-USM](installing-boot9strap-(usm))：Seedminer + BannerBomb3 + unSAFE_MODE - + 这个方法需要使用到肩键 1. [BannerBomb3](bannerbomb3)：Seedminer + BannerBomb3 + Fredtool + 如果 “L” 键或 “R” 键坏了，那么建议使用这种方法 -1. [Pichaxx](homebrew-launcher-(pichaxx))：Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx))：Seedminer + PicHaxx + Frogtool + 如果你进入 DSiWare 管理菜单发生了崩溃，建议使用此方法 \ No newline at end of file diff --git a/_pages/zh_CN/move-emunand.txt b/_pages/zh_CN/move-emunand.txt index 3bdb183d69..ff05612804 100644 --- a/_pages/zh_CN/move-emunand.txt +++ b/_pages/zh_CN/move-emunand.txt @@ -16,12 +16,12 @@ title: "迁移EmuNAND数据" ### 你需要准备点啥？ * 已有 EmuNAND 分区 -* v1.9.2pre1版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) * 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 将设备关机 1. 将SD卡插入电脑 @@ -29,7 +29,7 @@ title: "迁移EmuNAND数据" 1. 将 GodMode9 `.zip` 中的整个 `gm9` 文件夹复制到 SD 卡的根目录下 1. 将 SD 卡重新插入你的设备 -#### 第二步 — 备份 SysNAND 中的 DSiware 存档 +#### 第二步 – 备份 SysNAND 中的 DSiware 存档 如果你没有任何 DSiWare 游戏或者不关心其存档，那么你可以跳过这个部分。 {: .notice--info} @@ -43,7 +43,7 @@ title: "迁移EmuNAND数据" + 如果你有很多的 DSiWare 游戏，那么此过程可能会花一些时间。 1. 按两次 “B” 键返回到主菜单 -#### 第三步 — 备份 GBA VC 的存档 +#### 第三步 – 备份 GBA VC 的存档 如果你没有任何 GBA VC 游戏或者不关心其存档，那么你可以跳过这个部分。 {: .notice--info} @@ -69,7 +69,7 @@ title: "迁移EmuNAND数据" + 按 “A” 键继续 + 按下 “Start” 键重启设备 -#### 第四步 — 复制 EmuNAND 到 SysNAND +#### 第四步 – 复制 EmuNAND 到 SysNAND 1. 开机时按住 “Start” 键启动 GodMode9 1. 移动至 `[E:] EMUNAND VIRTUAL` @@ -82,7 +82,7 @@ title: "迁移EmuNAND数据" 1. 如果弹出重新锁定写入权限的提示，按下 “B” 键来拒绝。 1. 按下 “B” 键返回到主菜单 -#### 第五步 — 还原 DSiWare 游戏的存档 +#### 第五步 – 还原 DSiWare 游戏的存档 如果你之前没备份 DSiWare 的游戏存档，那么就跳过此部分。 {: .notice--info} @@ -99,7 +99,7 @@ title: "迁移EmuNAND数据" 1. 如果弹出重新锁定写入权限的提示，请按下 “B” 来拒绝 1. 按两次 “B” 键返回到主菜单 -#### 第六步 — 还原 GBA VC 的存档 +#### 第六步 – 还原 GBA VC 的存档 如果你之前没备份 GBA VC 的游戏存档，那么就跳过此部分。 {: .notice--info} @@ -127,7 +127,7 @@ title: "迁移EmuNAND数据" + 退出游戏并关机 1. 开机时按住 “Start” 键启动 GodMode9 -#### 第七步 — 备份 SysNAND +#### 第七步 – 备份 SysNAND 1. 按下 “Home” 键来打开功能菜单 1. 选择 “Scripts...” @@ -149,7 +149,7 @@ title: "迁移EmuNAND数据" 1. 将 `__sysnand_###.bin` 和 `__sysnand_###.bin.sha` 从你的 SD 卡的 `/gm9/out/` 文件夹中复制出后将其删除 1. **请备份你 SD 卡上的所有文件到电脑上；接下来 SD 卡上的所有文件将被删除** -#### 第八步 — 格式化 SD 卡 +#### 第八步 – 格式化 SD 卡 1. 将 SD 卡重新插入你的设备 1. 按下 “Home” 键来打开功能菜单 diff --git a/_pages/zh_CN/ntrboot.txt b/_pages/zh_CN/ntrboot.txt index 6caaf7a3f5..4cbf5120cc 100644 --- a/_pages/zh_CN/ntrboot.txt +++ b/_pages/zh_CN/ntrboot.txt @@ -17,23 +17,23 @@ title: "ntrboot" | 烧录卡名 | 目前价格 | 有无 “Time Bomb”？ | 3DS版本？ | DSi版本？ | 备注 | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | 15.99 美元 | 2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | **自带 ntrboot**，可刷回 NDS 烧录卡。 | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | 19.99 美元 | 否 | 11.13.0 或更低 | 1.4.5 或更低 | **自带ntrboot**（[支持切换 ntrboot 和 NDS 模式]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})），请勿手动刷入 ntrboot。 | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 2024 年 9 月 3 日 | 11.14.0 或更低 | 1.4.5 或更低 | **自带 ntrboot**，可刷回 NDS 烧录卡。 | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | 否 | 11.14.0 或更低 | 1.4.5 或更低 | **自带 ntrboot **（[支持切换 ntrboot 和 NDS 模式]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})），请勿手动刷入 ntrboot。 | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | 20.99美元 | 无 | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | 9.99 美元 | 否 | 无 | 无 | 只有一些带有[特定 flash 芯片型号](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6)的烧录卡兼容 ntrboot。 | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | 19.99 美元 | 否 | 11.13.0 或更低| 1.4.5 或更低 | 支持所有 RTS 修订版本。 | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | 13.99 美元 | 1.87：2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | 9.99 美元 | 3.9b：2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡相同。 不支持 2013 版本。 | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | 13.99 美元 | 3.9b：2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡相同。 不支持 2013 版本。 | -| **Ace3DS X** | | 否 | 11.13.0 或更低 | 1.4.5 或更低 | **自带 ntrboot**（使用外部开关可在ntrboot（“3DS”）和 NDS 模式间切换，请勿手动刷入 ntrboot。 | -| **Ace3DS Plus** | | 无 | 11.13.0 或更低| 1.4.5 或更低| | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | 否 | 11.14.0 或更低 | 1.4.5 或更低 | 支持所有 RTS 修订版本。 | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b：2024 年 9 月 3 日 | 11.14.0 或更低 | 1.4.5 或更低 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b：2024 年 9 月 3 日 | 11.14.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡的区别只有颜色。 不支持 2013 版本。 | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b：2024 年 9 月 3 日 | 11.14.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡的区别只有颜色。 不支持 2013 版本。 | +| **Ace3DS X** | | 否 | 11.14.0 或更低 | 1.4.5 或更低 | **自带 ntrboot**（使用外部开关可在 ntrboot （“3DS”）和 NDS 模式间切换，请勿手动刷入 ntrboot。 | +| **Ace3DS Plus** | | 无 | 11.14.0 或更低 | 1.4.5 或更低| | | **Gateway Blue** | | 无 | 4.1.0 - 4.5.0 | 1.4.5 或更低 | | -| **Infinity 3 R4i** | | 否 | 11.13.0 或更低 | 1.4.5 或更低 | | +| **Infinity 3 R4i** | | 无 | 11.14.0 或更低 | 1.4.5 或更低 | | | **R4 3D Revolution** | | 无 | 无 | 无 | | | **R4i Gold 3DS Deluxe "Starter"** | | 无 | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | 无 | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | 未知 | 11.13.0 或更低 | 1.4.5 或更低 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b：2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡相同。 | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | 未知 | 11.14.0 或更低 | 1.4.5 或更低 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b：2024 年 9 月 3 日 | 11.14.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡的区别只有颜色。 | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/zh_CN/region-changing.txt b/_pages/zh_CN/region-changing.txt index 97e5fd4623..21c0bf8850 100644 --- a/_pages/zh_CN/region-changing.txt +++ b/_pages/zh_CN/region-changing.txt @@ -17,10 +17,10 @@ title: "区域变更" 本过程将会把你的设备系统中的 NNID 绑定移除，因为在区域变更后它们将不再兼容。 NNID 在创建后就会被锁定在当前设备所在的区域，除非经过[一个非常复杂且进阶流程](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt)，不能在区域间迁移。 {: .notice--warning} -区域变更后，只有**从未开启过 eShop 的 New 3DS** 和**所有老型号的 3DS** 可以在新的区域创建一个新的 NNID 并访问 eShop。 而已经在原来的区域开启过 eShop 的 New 3DS 将不能创建新的 NNID，并在新的区域上访问 eShop！ +做完这些步骤之后，**你将无法进入eShop**。 这包括需要使用到 NNID 的任何功能，如：游戏更新、购买 DLC 和在某些游戏中的联机功能。 再改回原区域通常也不会修复这个问题。 {: .notice--warning} -请注意，有时候 eShop 在某些本应该可以访问的设备上还是莫名其妙地无法正常访问。 这完全是任天堂的服务器的问题，我真的背不了这个锅。 而且，有时候 eShop 突然会在照理说不能使用的主机上（比如某些 New 3DS 主机）变得可以使用。 我也不清楚是什么玄学修复的。 +请注意，有时候 eShop 会在某些本应该可以访问的主机上还是会莫名其妙地无法正常访问。 这完全是任天堂的服务器的问题，我真的背不了这个锅。 而且，有时候 eShop 突然会在照理说不能使用的主机上（比如某些 New 3DS 主机）变得可以使用。 我也不清楚是什么玄学修复的。 使用 CTR 转移进行区域变更（本章节使用的就是此法）似乎会造成重启补丁失效，原因未知。 也就是说，做完本章节后老型号的 3DS 将无法运行扩展内存模式的游戏（比如怪物猎人，任天堂明星大乱斗和精灵宝可梦日/月）直到设备恢复出厂设置。 @@ -29,8 +29,8 @@ title: "区域变更" ### 你需要准备点啥？ -* v1.9.2pre1版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) *（下载 `.3dsx` 文件）* +* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) +* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) **（下载 `.3dsx` 文件）** * 依据你想要切换到的区域选择合适的 CTR 转移（CTRTransfer）镜像: + - [New 3DS 或 New 2DS - 11.5.0 - 欧版 - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) + - [New 3DS 或 New 2DS - 11.5.0 - 日版 - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) @@ -43,7 +43,7 @@ title: "区域变更" ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 关闭你设备的电源 1. 将 SD 卡插入电脑 @@ -55,12 +55,34 @@ title: "区域变更" 1. 复制 `FBI.3dsx` 到 SD 卡的 `/3ds/` 目录下 1. 将 SD 卡重新插入你的设备 -#### 第二步 — CTRTransfer - +#### 第二步 – 备份 NAND 1. 开机时按住 “Start” 键启动 GodMode9 1. 如果提示创建重要文件备份，按下 “A” 键确认，在完成后再次按下 “A” 键来继续。 1. 如果出现修复 RTC 日期与时间的提示，按 “A” 键执行修复，然后设置好日期和时间，并按 “A” 继续 + 请注意，如果出现了该提示，则执行完本指南后你还需要在系统设置中重新设置时间 +1. 按下 “Home” 键来打开功能菜单 +1. 选择 “Scripts...” +1. 选择 “GM9Megascript” +1. 选择 “Backup Options” +1. 选择 “SysNAND Backup” +1. 按下 “A” 键确认 + + 此过程将花费一些时间 + + 如果你遇到了错误, 请确保你的 SD 卡上至少有 1.3GB 的可用空间 +1. 按 “A” 键继续 +1. 按下 “B” 键返回到主菜单 +1. 选择 “Exit” +1. 如果提示重新锁定写入权限，按下 “A” 键来确认 +1. 同时按 “R” 键和“B”键，弹出你的SD卡 +1. 将你的 SD 卡插入到电脑 +1. 从 SD 卡的 `/gm9/out/` 文件夹中复制 `__sysnand_###.bin` 和 `essential.exefs` 到电脑中的安全的位置 + + 请在多处地方备份这些文件（比如网盘等） + + 如果以后机器出现任何问题，这些备份文件将是为你提供修复砖机或从 NAND 镜像恢复文件的帮手 +1. 将 `__sysnand_###.bin` 和 `__sysnand_###.bin.sha` 从你的 SD 卡的 `/gm9/out/` 文件夹中复制出后将其删除 +1. 将SD卡重新插入你的主机 + + 如果你的 SD 卡没有被工具检测到，请同时按下 “R” + “B” 键来重新将其挂载 + +#### 第三步 – CTRTransfer + 1. 移动至 `[0:] SDCARD` -> `gm9` 1. 在 CTRTransfer `.bin` 上按 “A” 键以选中它 1. 选择 “CTRNAND options...” @@ -87,7 +109,7 @@ title: "区域变更" + 你使用 B9S 和 Luma 时升级系统是安全的 + 如果在更新中途出错，请将主机的 DNS 设置改为 “自动(auto)” -#### 第三步 — 启动 FBI 应用 +#### 第四步 – 启动 FBI 应用 1. 启动“下载通信(Download Play)”程序 (它长[这样]({{ "/images/download-play-icon.png" | absolute_url }}) 1. 同时按下“L”+“下”+“Select” 键来打开 Rosalina 菜单 @@ -100,7 +122,7 @@ title: "区域变更" 1. 运行“下载通信（Download Play）”程序 1. 此时你的主机应该会启动 Homebrew Launcher了 -#### 第四步 — 重装 Tickets +#### 第五步 – 重装 Tickets 如果脚本没有找到任何使用者的 tickets 并且告诉你跳过本小节，那么就跳过本小节 {: .notice--info} @@ -120,19 +142,19 @@ title: "区域变更" + 按 “B” 键来拒绝从 CDN 安装 tickets。 1. 按 “Home” 键退出 FBI -#### 第五步 — 区域设置 +#### 第六步 – 区域设置 1. 启动“系统设置（System Settings）” 1. 选择“其他设置（Other Settings）”，然后点击“个人资料（Profile）”，然后“区域设置（Region Settings）” 1. 选择你变更区域后的国家 1. 如果出现提示，州（state）的部分无需设置 -#### 第六步 — 删除 CTRTransfer 镜像 +#### 第七步 – 删除 CTRTransfer 镜像 1. 开机时按住 “Start” 键启动 GodMode9 1. 移动至 `[0:] SDCARD` -> `gm9` 1. 在 CTRTransfer `.bin` 上按 “X” 来删除它 -1. 按下 “A” 键确认 +1. 按 “A” 确认 1. 按 “Start” 键重启你的设备 ___ diff --git a/_pages/zh_CN/restoring-cfw.txt b/_pages/zh_CN/restoring-cfw.txt new file mode 100644 index 0000000000..a918c66929 --- /dev/null +++ b/_pages/zh_CN/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "还原自制固件" +--- + +{% include toc title="目录内容" %} + +### 必读事项 + +此页面将为已安装现代 boot9strap 固件的主机进行重新安装自制固件应用。 当 SD 卡由于意外损坏或丢失时，你也可以使用这个方法来恢复。 + +### 你需要准备点啥？ +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### 操作步骤 + +#### 第一步 – 准备工作 + +1. 将你的 SD 卡插入到电脑 +1. 解压 Luma3DS `.zip` 里的 `boot.3dsx` 和 `boot.firm` 到你 SD 卡的根目录 + + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去 +1. 将SD卡重新插入你的主机 + +#### 第二步 – 设置 Luma3DS + +1. 将主机开机 + * 你现在应该会看到 Luma3DS 的配置菜单 +1. 使用方向键和 “A” 键来启用以下设置： + * **“Show NAND or user string in System Settings”** +1. 按下 “Start” 键保存设置并重启 + +___ + +### 继续至[完成安装](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_CN/seedminer.txt b/_pages/zh_CN/seedminer.txt index 359197fa49..bd2fa3f0fe 100644 --- a/_pages/zh_CN/seedminer.txt +++ b/_pages/zh_CN/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="内容目录" %} +基于 Seedminer 的方法已被更简单且更安全的方法取代。 除非你有原因（如肩键损坏）而不得不使用本教程，请回到[新手入门(get-started)查阅新的方法。 +{: .notice--warning} + ### 必读事项 -我们利用了 DSiWare 游戏中的一个漏洞来在你的主机上安装 Boot9Starp。 +为了在你的设备上安装 boot9strap，我们需要获得你主机上的唯一加密密钥。 为了做到这点，我们使用了一个叫 Seedminer 的工具来计算你设备的 DSiWare 加密密钥（`movable.sed`）。 然后, 我们使用 DSiWare 加密密钥来解密与漏洞相兼容的 DSiWare 游戏。之后，我们将漏洞植入游戏好让我们运行任何想要运行的程序（漏洞种类视你的主机系统区域而定）。 @@ -16,21 +19,7 @@ title: "Seedminer" ### 操作步骤 -#### 第一步 — 兼容性测试 - -虽然这些测试不是为了触发 Seedminer 漏洞而必须要做的。但是如果不进行测试的话可能会因为 Seedminer 漏洞在你的主机失效而白白浪费时间并可能会无法使用其他的漏洞。 - -这里有多种不同的方法启动 Seedminer 漏洞，所以即使这个测试失败了，你仍然可以使用其他的方法 - -#### DSiWare 数据管理测试（用于 unSAFE_MODE） - -1. 转到系统设置，然后点击数据管理（Data Management），然后点击 “DSiWare” -1. 如果你的主机没有崩溃，那么表示测试成功了 - + 如果主机发生了崩溃并回到了主菜单， 那么测试失败，你只能使用在本页底部的“传统方法”破解 - + 如果您在主机闪退到主菜单之前看到了彩色的屏幕，请加入[Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英语请求帮助（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网）你也可以到译者的[QQ群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为 942052497。 -1. 退出至主菜单 - -#### 第二步 — 准备工作 +#### 第一步 – 准备工作 1. 将你的 SD 卡插入到电脑 1. 打开你 SD 卡的 `Nintendo 3DS` 文件夹 @@ -52,12 +41,11 @@ title: "Seedminer" + 如果出现错误信息并被踢回到主菜单，则你需要创建一个 Mii 形象或你的设备无法连接到任天堂服务器（由于封禁或网络问题） 1. 找到你的 Mii 个人形象，然后在上屏寻找你的“朋友代码（Friend Code）” -#### 第三步 — Seedminer +#### 第二步 – Seedminer 1. 在你的电脑上打开 [Bruteforce Movable](https://seedminer.hacks.guide/) + 这个网站可以自动替你获取 `movable_part1.sed` 文件（通过一台由机器人操控的 3DS），并破解你主机的 DSiWare 密钥（通过某自愿者的电脑运行 Seedminer 取得） - + 如果这个网站抛锚了，尝试[这个网站](https://bfm.nintendohomebrew.com/) - + 如果这两个网站都无法使用了，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文请求帮助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网）你也可以到译者的QQ群寻求帮助，群号为 942052497。 + + 如果网站功能无法使用，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文请求帮助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网）你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为942052497。 1. 在 “Your friend code” 选项填入你设备的 “朋友代码（Friend Code）”（只要数字，不要填入空格或破折号） 1. 在 “Your ID0” 栏位粘贴之前复制的 32 位长的字符串 + 不要尝试手动输入 ID0， 确保那是你在上一节中复制并粘贴的 ID0 以防复制错了 @@ -69,26 +57,27 @@ title: "Seedminer" 1. 一旦网页开始处理你主机的相关信息，你将可以选择“继续（Contiune）”或“破解其他设备 （Do another device）” 点击绿色的 “Continue” 按钮 1. 等待其完成步骤中的其余部分 + 这通常是很快的（1～5 分钟左右），但是在某些情况下可能会需要长达半小时。 - + 在这个过程中，你之前添加的机器人 3DS 可能不会在你的 3DS 上面展示 不过只要网站还在更新，这就不是个问题。 - + 如果你已经等待了半个小时，那么请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文求助。你也可以到译者的QQ群寻求帮助，群号为942052497。 + + 在这个过程中，你之前添加的机器人好友可能不会在你的 3DS 上面展示 不过只要网站还在更新，这就不是个问题。 + + 如果你已经等待了半个小时，那么请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文求助。你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 1. 等待程序自动完成后，从站点下载 `movable.sed` 文件 + 你在之后还会用到这个文件，请先把这个文件存起来 ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp（推荐） -这种将使用 Seedminer 进行进一步破解的方法使用了你的 `movable.sed` 来利用所有机型都有的 SAFE_MODE 固件来进行破解系统。 +此方法利用由 Seedminer 取得的 `movable.sed` 文件，把为宝可梦绘图方块（Pokémon Picross）自制的存档写入游戏，然后利用 universal-otherapp 安装自制固件。 -这种方法与所有区域兼容，尽管神游机因为阉割了此部分所需内容并不能执行这个操作 +此方法需要宝可梦绘图方块（Pokémon Picross，可在 eShop 中免费下载），所以只有能够访问 eShop 且主机区域为美版、欧版或日版的主机才能做这个。 -继续至[安装 boot9strap（通过 USM）](installing-boot9strap-(usm)) +继续至[安装 boot9strap（通过 Pichaxx）](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### 传统方法 +此方法利用由 Seedminer 取得的 `movable.sed` 来构建一个自制的 DSiWare 备份文件，利用它触发漏洞来导出系统的 DSiWare 软件。 -这些方法早已过时，除非另有说明，否则建议不要使用。 +仅当你因为某些原因无法使用 PicHaxx + universal-otherapp 方法时，才推荐做这个方法。 -[传统方法](legacy-methods) +继续至 [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/zh_CN/site-navigation.txt b/_pages/zh_CN/site-navigation.txt index 824e05203d..356c0803e5 100644 --- a/_pages/zh_CN/site-navigation.txt +++ b/_pages/zh_CN/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **热门** + [完成安装](finalizing-setup) -+ [启动 Homebrew Launcher（通过Soundhax）](homebrew-launcher-(soundhax)) -+ [启动 Homebrew Launcher（通过 2020 版浏览器破解）](homebrew-launcher-(browserhax-2020)) -+ [安装 boot9strap（通过 unSAFE_MODE）](installing-boot9strap-(usm)) ++ [安装 boot9strap（通过 Soundhax）](installing-boot9strap-(soundhax)) ++ **New 3DS**：[安装 boot9strap（通过浏览器）](installing-boot9strap-(browser)) ++ **旧版 3DS**：[安装 boot9strap（通过 safecerthax）](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [卡带升级](cart-update) + [致谢](credits) ++ [检查自制固件](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [捐赠](donations) + [F3（Linux）](f3-(linux)) + [F3X（Mac）](f3x-(mac)) @@ -33,31 +34,36 @@ sitemap: false + [写入 ntrboot（通过多台 3DS）](flashing-ntrboot-(3ds-multi-system)) + [写入 ntrboot（通过 DSi）](flashing-ntrboot-(dsi)) + [写入 ntrboot（通过 NDS）](flashing-ntrboot-(nds)) ++ [格式化 SD 卡（通过 Linux 操作系统）](formatting-sd-(linux)) ++ [格式化 SD 卡（通过 Mac 操作系统）](formatting-sd-(mac)) ++ [格式化 SD 卡（通过 Windows 操作系统）](formatting-sd-(windows)) + [新手入门](get-started) ++ [新手入门（New 3DS）](get-started-(new-3ds)) ++ [新手入门（旧版 3DS）](get-started-(old-3ds)) + [如何使用 GodMode9](godmode9-usage) + [H2testw（Windows）](h2testw-(windows)) + [首页](/zh_CN/) -+ [启动 Homebrew Launcher （通过其他方法）](homebrew-launcher-(alternatives)) -+ [启动 Homebrew Launcher（通过 2020 版浏览器破解）](homebrew-launcher-(browserhax-2020)) -+ [启动 Homebrew Launcher （通过PicHaxx）](homebrew-launcher-(pichaxx)) ++ [启动 Homebrew Launcher（通过其他方法）](homebrew-launcher-(alternatives)) ++ [启动 Homebrew Launcher（通过 PicHaxx）](homebrew-launcher-(pichaxx)) + [启动 Homebrew Launcher（通过 Soundhax）](homebrew-launcher-(soundhax)) -+ [启动 Homebrew Launcher（通过 Steelhax）](homebrew-launcher-(steelhax)) + [安装 boot9strap（通过 2xrsa）](installing-boot9strap-(2xrsa)) + [安装 boot9strap（通过浏览器）](installing-boot9strap-(browser)) + [安装 boot9strap（通过 Fredtool）](installing-boot9strap-(fredtool)) + [安装 boot9strap（通过 Frogtool）](installing-boot9strap-(frogtool)) + [安装 boot9strap（通过拆机硬改）](installing-boot9strap-(hardmod)) + [安装 boot9strap（通过 MSET）](installing-boot9strap-(mset)) -+ [安装 boot9strap （通过 ntrboot）](installing-boot9strap-(ntrboot)) -+ [安装 boot9strap （通过 SafeB9SInstaller）](installing-boot9strap-(safeb9sinstaller)) ++ [安装 boot9strap（通过 ntrboot）](installing-boot9strap-(ntrboot)) ++ [安装 boot9strap（通过 Pichaxx）](installing-boot9strap-(pichaxx)) ++ [安装 boot9strap（通过 SafeB9SInstaller）](installing-boot9strap-(safeb9sinstaller)) ++ [安装 boot9strap（通过 safecerthax）](installing-boot9strap-(safecerthax)) + [安装 boot9strap（通过 Soundhax）](installing-boot9strap-(soundhax)) -+ [安装 boot9strap（通过 unSAFE_MODE）](installing-boot9strap-(usm)) -+ [安装 boot9strap（通过 HBL-USM）](installing-boot9strap-(hbl-usm)) ++ [安装 boot9strap（SSLoth-Browser）](installing-boot9strap-(ssloth-browser)) ++ [安装 boot9strap（通过 USM）](installing-boot9strap-(usm)) + [迁移 EmuNAND 数据](move-emunand) + [ntrboot](ntrboot) + [区域变更](region-changing) ++ [还原自制固件](restoring-cfw) + [Seedminer](seedminer) -+ [传统 Seedminer 方法](legacy-methods) + [问题排查](troubleshooting) + [卸载自制系统](uninstall-cfw) + [升级 B9S](updating-b9s) diff --git a/_pages/zh_CN/troubleshooting.txt b/_pages/zh_CN/troubleshooting.txt index 90f95ee037..3f88f0393b 100644 --- a/_pages/zh_CN/troubleshooting.txt +++ b/_pages/zh_CN/troubleshooting.txt @@ -22,7 +22,7 @@ title: "故障排查" ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 1. 关闭你的设备的电源 1. 将你的 SD 卡插入到电脑 @@ -30,7 +30,7 @@ title: "故障排查" 1. 复制 `TWLFix-CFW.3dsx` 到你内存卡的 `/3ds/` 文件夹 1. 将 SD 卡重新插入你的主机 -#### 第二步 — 修复 TWL 分区 +#### 第二步 – 修复 TWL 分区 1. 启动 Homebrew Launcher 1. 在自制程序列表中找到 TWLFix-CFW @@ -105,7 +105,7 @@ title: "故障排查" 1. 同时按住“L”+“R”+“A”+“Up” 键 1. 将设备开机 1. 如果你进入了安全模式，更新你的设备 -1. 你的设备可能变砖了。 如需援助，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的QQ群寻求帮助，群号为942052497。 +1. 你的设备可能变砖了。 如需援助，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 ## 清除主菜单的外部存储 @@ -148,10 +148,10 @@ title: "故障排查" 1. 尝试拔掉卡带（包括烧录卡）开机 1. 如果你之前通过 Gateway 降级过主机，那么请确保你的 Luma3DS 是最新版 1. 试试 [CTRTransfer](ctrtransfer) -1. 如需援助，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的QQ群寻求帮助，群号为942052497。 +1. 如需援助，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 ## 开机时蓝屏（bootrom 错误） 1. 你的设备变砖了。 1. 你需要使用一张支持 ntrboot 的烧录卡（兼容名单请看[这里](ntrboot)）或拆机[硬改](https://gbatemp.net/threads/414498/)来修复主机软件或维修 / 更换你的设备。 -1. 如需援助，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的QQ群寻求帮助，群号为942052497。 +1. 如需援助，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 diff --git a/_pages/zh_CN/uninstall-cfw.txt b/_pages/zh_CN/uninstall-cfw.txt index 77864abbcd..aa652b8b9c 100644 --- a/_pages/zh_CN/uninstall-cfw.txt +++ b/_pages/zh_CN/uninstall-cfw.txt @@ -8,8 +8,8 @@ title: "卸载自制固件" 本章节将会教你如何完全把自制固件从你的设备完全移除，为了完全恢复原厂系统，所有的自制固件将被卸载，包括 B9S 和 Luma3DS。 -这可不是可以解决你在破解主机时遇到任何问题的解决方法。 建议先试试[故障排查](troubleshooting)页面或使用英文在[Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)上寻求援助。（请注意，如果你身处中国大陆，访问 Discord 可能需要通过科学上网） -你也可以到译者的QQ群寻求帮助，群号为942052497。 +这可不是可以解决你在破解主机时遇到任何问题的解决方法。 建议先试试[故障排查](troubleshooting)页面或使用英文在 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)上寻求援助。（请注意，如果你身处中国大陆，访问 Discord 可能需要通过科学上网） +你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 {: .notice--danger} 你将无法游玩任何已安装且未签名（盗版）的游戏，请在开始本章教程之前进入系统设置内的数据管理中将它们全部删除。 你可以使用 [save manager](https://github.com/FlagBrew/Checkpoint/releases/latest) 来备份你想要备份的未签名（盗版）游戏存档。 @@ -27,7 +27,7 @@ title: "卸载自制固件" ### 操作步骤 -#### 第一步 — 安全性测试 +#### 第一步 – 安全性测试 1. 将设备关机 1. 将你的 SD 卡插入到电脑 @@ -50,9 +50,9 @@ title: "卸载自制固件" 1. 选择 “Boot FIRM” 1. 出现提示时，按下“A”键解密并制作副本 1. 你应该会启动到正常的 3DS 主菜单。 如果是这样，关闭你的主机并继续下一章节。 - + 如果你没有进入到正常的 3DS主菜单，继续下面的步骤将 **会** 导致你的机器变砖。 请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文来请求支援。你也可以到译者的QQ群寻求帮助，群号为 942052497。 + + 如果你没有进入到正常的 3DS主菜单，继续下面的步骤将 **会** 导致你的机器变砖。 请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并说英文来请求支持。你也可以到译者的 [QQ 群](https://stray-soul.site/index.php/qqgroup)寻求帮助，群号为 942052497。 -#### 第二步 — 准备工作 +#### 第二步 – 准备工作 1. 启动你的主机 1. 打开“系统设置（System Settings）” > “数据管理（Data Management）” > “Nintendo 3DS” > “软件（Software）” @@ -64,7 +64,7 @@ title: "卸载自制固件" + 如果无法卸载这些 3DS 和 DSiWare 软件，卸载自制固件可能会导致数据管理无法进入或数据损坏。 1. 将设备关机 -#### 第三步 — 运行卸载脚本 +#### 第三步 – 运行卸载脚本 1. 开机时按住 “Start” 键启动 GodMode9 1. 按下 “Home” 键来打开功能菜单 diff --git a/_pages/zh_CN/updating-b9s.txt b/_pages/zh_CN/updating-b9s.txt index 65bf41b940..1263e1b525 100644 --- a/_pages/zh_CN/updating-b9s.txt +++ b/_pages/zh_CN/updating-b9s.txt @@ -8,44 +8,29 @@ title: "更新 B9S" 本页是给现有 Boot9strap 的用户且想更新 Boot9strap 到最新版本而准备的。 -{% capture notice-1 %} -据消息称，任天堂封禁了大量使用自制系统（CFW）的用户。 为了自保，请在继续教程前先进行如下操作。 - -1. 进入“系统设置（System Settings）”，点击“互联网设置（Internet Settings）”，然后再点击“SpotPass”，之后再继续点击“发送系统信息（Sending of System Information）” -1. 关闭“发送系统信息（Sending of System Information）”选项 -1. 退出系统设置 -1. 开启你的好友列表（Home 主菜单中最上方的[橙色的笑脸]({{ "/images/friend-list-icon.png" | absolute_url }})） - + 如果出现错误信息并被踢回到主菜单，则好友列表设置可能已被禁用或你的设备无法连接到任天堂服务器（由于封禁或网络问题） -1. 进入“好友列表设置（Friend List settings）”，然后点击“好友提示设置（Friend Notification Settings）”，再然后点击“展示正在游玩的游戏（Show friends what you're playing）” -1. 关闭“向好友展示正在玩的游戏（Show friends what you're playing）”选项 -1. 退出好友列表 - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+我们现在相信自制固件可以安全地联网了，不过仍然要提一下：过去的联网封禁大多数是因为作弊和可疑的 eShop 行为造成的。 +{: .notice--warning} ### 你需要准备点啥？ * 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** -* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）** +* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### 操作步骤 -#### 第一步 — 准备工作 +#### 第一步 – 准备工作 请在本节中的所有步骤中覆盖 SD 卡上的所有现有文件。 {: .notice--info} 1. 将 SD 卡插入电脑 -1. 复制 `boot.3dsx` 到你的 SD 卡根目录 1. 在SD卡根目录创建一个名为`boot9strap`的文件夹 1. 从boot9strap `.zip` 压缩包中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你 SD 卡的 `/boot9strap/` 文件夹中 1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.firm` 到 SD 卡 `/luma/payloads/` 目录中 1. 将 SD 卡重新插入你的设备 -#### 第二步 — 安装 boot9strap +#### 第二步 – 安装 boot9strap 1. 开机时按住 “Start” 键来启动 Luma3DS chainloader 菜单 1. 按 “A” 键启动 SafeB9SInstaller @@ -54,15 +39,15 @@ title: "更新 B9S" 1. 当完成后，按下 “Start” 键，然后按 “A” 来重启你的设备到 Luma3DS chainloader 菜单 + 如果你在 B9S 更新后遇到 “argc = 0” 错误， 请忽略并继续教程 -#### 第三步 — 升级 Luma3DS +#### 第三步 – 升级 Luma3DS 1. 将设备关机 1. 将你的 SD 卡插入到电脑 -1. 解压 Luma3DS `.zip` 内的 `boot.firm` 到你 SD 卡的根目录，请覆盖已有文件 +1. 解压 Luma3DS `.zip` 内的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录，覆盖已有文件 1. 将 SD 卡重新插入你的主机 1. 启动你的主机 -#### 第四步 — 配置 Luma3DS +#### 第四步 – 配置 Luma3DS 本步骤仅在重启时出现 Luma3DS 设置菜单时才需使用。 {: .notice--info} diff --git a/_pages/zh_TW/a9lh-to-b9s.txt b/_pages/zh_TW/a9lh-to-b9s.txt index 4f896a0b8d..d59486b1dc 100644 --- a/_pages/zh_TW/a9lh-to-b9s.txt +++ b/_pages/zh_TW/a9lh-to-b9s.txt @@ -14,25 +14,9 @@ title: "升級 A9LH 至 B9S" 若要解壓該頁面中的`.7z`檔案，您將需要一個壓縮檔管理員，如 [7-Zip](http://www.7-zip.org/) 或 [The Unarchiver](https://theunarchiver.com/)。 -如果您先前有在 Luma3DS 中設置了安全 PIN 碼，除非您暫時將其關閉，否則 SafeB9SInstaller 安裝包將會出現『OTP Crypto Fail』的錯誤訊息 (您可以在更新後重新設定 PIN 碼)。 +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. {: .notice--warning} -{% capture notice-1 %} -近日有許多的自製韌體用戶已經被任天堂封殺，幾乎所有的線上功能都被禁止使用。 為了自保，請在遵循本教學前進行以下防護措施： - -1. 進入『系統設定 (System Settings)』、『網路設定 (Internet Settings)』、『SpotPass』、『回傳系統訊息 (Sending of System Information)』 -1. 禁用『回傳系統訊息 (Sending of System Information)』 -1. 退出系統設定 -1. 開啟您的好友清單 (HOME 主選單中最上方的[橘色笑臉圖示]({{ "/images/friend-list-icon.png" | absolute_url }})) - + 如果您遇到錯誤訊息且從清單中被踢回主選單，那麼可能您已將好友清單設定關閉或您的主機無法連線至任天堂伺服器 (您可能已被封殺或網路連線之問題) -1. 進入好友選單設定、『好友提示設定 (Friend Notification Settings)』、『顯示正在遊玩的遊戲 (Show friends what you're playing)』 -1. 禁用『顯示正在遊玩的遊戲 (Show friends what you're playing)』 -1. 退出好友清單 - -{% endcapture %} - -
{{ notice-1 | markdownify }}
- ### 必備項目 請注意，以下所需的 `secret_sector.bin` 與在各式 `data_input.zip` 版本中所見的檔案相同。 如果您已經有了那個檔案，您可以直接使用它而不必再重新下載一個新的。 @@ -42,11 +26,10 @@ title: "升級 A9LH 至 B9S" {: .notice--info} * - **僅適用於 New 3DS 用戶:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce) -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* 7.0.5 版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(`.7z` 檔案)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)* * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* -* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* ### 操作說明 @@ -57,8 +40,7 @@ title: "升級 A9LH 至 B9S" 1. 關閉您的主機 1. 將 SD 卡插入至電腦中 -1. 將 `boot.3dsx` 複製到 SD 卡根目錄中 -1. 解壓最新版 Luma3DS `.zip` 內的 `boot.firm` 到 SD 卡的根目錄底下 +1. Copy `boot.firm` and `boot.3dsx` from the latest version Luma3DS `.zip` to the root of your SD card 1. 解壓 v7.0.5 Luma3DS `.7z` 內的 `arm9loaderhax.bin` 到 SD 卡的根目錄底下 1. 刪除所有在您 SD 卡 `/luma/payloads/` 資料夾中的 `.bin` payload 檔案，因為它們將無法與 boot9strap 版本的 Luma3DS 相容 1. 解壓 SafeB9SInstaller`.zip` 中的 `SafeB9SInstaller.bin` 到 SD 中的 `/luma/payloads/` 下 diff --git a/_pages/zh_TW/bannerbomb3.txt b/_pages/zh_TW/bannerbomb3.txt index 4a335f40c1..cff15e6bb8 100644 --- a/_pages/zh_TW/bannerbomb3.txt +++ b/_pages/zh_TW/bannerbomb3.txt @@ -4,6 +4,9 @@ title: "BannerBomb3" {% include toc title="條目內容" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### 必讀事項 為了導出系統的 DSiWare 軟體， 我們使用了在系統設定內的 DSiWare 數據管理視窗的一個漏洞。 @@ -17,7 +20,7 @@ These instructions work on USA, Europe, Japan, and Korea region consoles as indi * 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 #### Section I - BannerBomb3 -1. Open [BannerBomb3 Tool](https://bb3.bruteforcemovable.com/) on your computer +1. Open [BannerBomb3 Tool](https://3ds.nhnarwhal.com/3dstools/bannerbomb3.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Go" + This will download an exploit DSiWare called `F00D43D5.bin` inside of a zip file (`tadmuffin_out.zip`) diff --git a/_pages/zh_TW/checking-for-cfw.txt b/_pages/zh_TW/checking-for-cfw.txt new file mode 100644 index 0000000000..b012f27e99 --- /dev/null +++ b/_pages/zh_TW/checking-for-cfw.txt @@ -0,0 +1,38 @@ +--- +title: "Checking for CFW" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +This is an add-on section to check if your console already has a modern custom firmware. + +If your console already has an arm9loaderhax or boot9strap based custom firmware, you will need to follow the instructions indicated to upgrade your setup to a modern one. + +If your console has a menuhax based CFW setup, you should [clear Home Menu's extdata](troubleshooting#clear-home-menu-extdata), then follow all instructions on your SysNAND. +{: .notice--primary} + +### 操作說明 + +1. Turn off your console +1. Hold the (Select) button +1. Turn on your console while still holding the (Select) button +1. You should now see a configuration menu of some sort + +___ + +If your console boots to the normal home menu, return to [Get Started](get-started) +{: .notice--success} + +If you see a Luma3DS version of 7.0.5 or lower, continue to [A9LH to B9S](a9lh-to-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 7.1, continue to [Updating B9S](updating-b9s) +{: .notice--primary} + +If you see a Luma3DS version of 8.0 or greater, continue to [Restoring CFW](restoring-cfw) +{: .notice--primary} + +If you see something not described by the above options, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--danger} diff --git a/_pages/zh_TW/credits.txt b/_pages/zh_TW/credits.txt index c6f65fcff2..27c5f6d8bd 100644 --- a/_pages/zh_TW/credits.txt +++ b/_pages/zh_TW/credits.txt @@ -2,6 +2,9 @@ title: "製作群" --- +**Special thanks to Plailect, the original creator and maintainer of the guide!** +{: .notice--primary} + **特別感謝所有在[ Freenode 上 #Cakey ](http://webchat.freenode.net/?channels=%23Cakey)的所有成員！** {: .notice--primary} @@ -22,7 +25,7 @@ title: "製作群" + Cartman123 + Cell9 + coder65535 - + Cruel` + + Cruel + d0k3 + dank101 + Dazzozo @@ -35,6 +38,7 @@ title: "製作群" + erman1337 + felipejfc + figgyc + + fox8091 + Frozen_Chen + Gelex + Hamcha @@ -46,12 +50,12 @@ title: "製作群" + jkcgs + kartik + LordBass - + MassExplosion123 + mid-kid + MrNbaYoh + Mrrraou + Night_Fallen_Wolf + Normmatt + + Plailect + plutooo + Psi-Hate + RandallHoffman diff --git a/_pages/zh_TW/dsidumper.txt b/_pages/zh_TW/dsidumper.txt index d57ec3f07c..9762798a6c 100644 --- a/_pages/zh_TW/dsidumper.txt +++ b/_pages/zh_TW/dsidumper.txt @@ -2,36 +2,5 @@ title: "DSiDumper" --- -{% include toc title="條目內容" %} - -### 必讀事項 - -To dump system DSiWare, we use an existing homebrew launcher exploit. - -If during this guide you discovered a broken DS Internet Settings application, follow [TWLFix for Homebrew](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases) before continuing - -### 必備項目 - -* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 -* The latest release of [DSiWare Dumper](https://github.com/MechanicalDragon0687/3DS-DSiWare_Dumper/releases) - -#### 第一節 — 準備工作 - -1. 關閉您的主機 -1. 將 SD 卡插入至電腦中 -1. 將 `moving.sed` 檔案複製到 SD 卡的根目錄中 -1. Copy `DSiWare_Dump.3dsx` to the `/3ds/` folder on your SD card -1. 將 SD 卡插回主機中 -1. 啟動您的主機 - -#### Section II - DSiWare Dumping - -1. 透過任意方法執行 Homebrew Launcher -1. Launch DSiWare Dumper from the list of homebrew - + This will dump a DSiWare application to SD root - + It is normal to see several failures. -1. When it shows "Success", this is the file you will use for the DSiWare backup later in the guide - -繼續至[安裝 boot9strap (透過 Fredtool)](installing-boot9strap-(fredtool)) -{: .notice--primary} - +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/zh_TW/faq.txt b/_pages/zh_TW/faq.txt index 8f1cd4e089..4f3113b5fe 100644 --- a/_pages/zh_TW/faq.txt +++ b/_pages/zh_TW/faq.txt @@ -6,7 +6,7 @@ title: "常見問題 FAQ" **A:** 可以的！ **Q:** *我該怎麼更新 Luma3DS？* -**A:** 使用 [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) +**A:** Copy the `boot.firm` and `boot.3dsx` files from the [latest release of Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) to the root of the SD card, replacing any existing files. **Q:** *我之前有聽說過些付費工具像是 Gateway、Sky3DS 等等的。* 我會需要那些嗎？* **A:** 不用。 boot9strap 能在開機前幾秒就能載入改機所需的檔案，因此它是目前最棒的改機方法。 diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt index 22a5d32fa2..dd145c8457 100644 --- a/_pages/zh_TW/finalizing-setup.txt +++ b/_pages/zh_TW/finalizing-setup.txt @@ -8,14 +8,14 @@ title: "完成安裝" `boot.firm` 這個檔案是 boot9strap 由 NAND 載入自身後所接著加載的，且它可以是任何 FIRM 格式的有效 arm9 payload。 您隨時可以替換這檔案，不過 Luma3DS 本身就有內建加載其他 FIRM 格式的 arm9 payload 檔案的功能。 -本節中，我們將使用 [AuroraWright](https://github.com/AuroraWright/) 所做的 Luma3DS 來直接啟動修改後的 SysNAND，完全不必 EmuNAND。這除了大量的簡化使用改機後 3DS 的步驟，還能節省 SD 卡的使用空間。 +In this case, we use Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. 在這過程中，我們也將安裝下列程式： + **FBI 管理器** *(安裝 CIA 格式的遊戲及程式)* + **Anemone3DS** *(安裝自訂主題)* + **Checkpoint** *(備份及還原 3DS 及 DS 遊戲之存檔)* -+ **Luma3DS Updater** *(以便更新 Luma3DS)* ++ **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over wifi)* + **GodMode9** *(多功能工具包，用來處理 NAND 及卡帶的相關功能)* + **Homebrew Launcher Loader** *(用於啟動 Homebrew Launcher)* + **DSP1** *(允許自製程式播放音效)* @@ -25,12 +25,12 @@ title: "完成安裝" * 最新版的 [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(`.cia` 檔案)* * 最新版的 [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest)*(`.cia` 檔案)* +* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) *(the `.cia` file)* * 最新版的 [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) * The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) -* 最新版的 [DSP1](https://github.com/zoogie/DSP1/releases/latest) +* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest) *(the `.cia` file)* * 最新版的 [FBI 管理器](https://github.com/Steveice10/FBI/releases/latest) *(`.cia` 及 `.3dsx` 檔案)* * 最新版本的 [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest) -* 最新版的 [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *(`.cia` 檔案)* ### 操作說明 @@ -39,15 +39,16 @@ title: "完成安裝" 1. 關閉您的主機 1. 將 SD 卡插入至電腦中 1. 在 SD 卡的根目錄底下建立一個新資料夾 `3ds` + + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates 1. 在 SD 卡的根目錄底下，建立一個新資料夾 `cias` 1. 將 `ctr-no-timeoffset.3dsx` 複製到 SD 卡中的 `/3ds/` 資料夾底下 1. 將 `FBI.3dsx` 複製到 SD 卡中的 `/3ds/` 資料夾底下 1. 將 `Homebrew_Launcher.cia` 複製到 SD 卡中 `/cias/` 資料夾底下 -1. 複製 `lumaupdater.cia` 檔案至 SD 卡上的 `/cias/` 資料夾中 1. 將 `FBI.cia` 複製到 SD 卡中 `/cias/` 資料夾底下 1. 將 `DSP1.cia` 複製到 SD 卡中 `/cias/` 資料夾底下 1. 將 `Anemone3DS.cia` 複製到 SD 卡中 `/cias/` 資料夾底下 1. 將 `Checkpoint.cia` 複製到 SD 卡中 `/cias/` 資料夾底下 +1. Copy `Universal-Updater.cia` to the `/cias/` folder on your SD card 1. 在 SD 卡中的 `luma` 資料夾中建立一個另一個新資料夾 `payloads` 1. 解壓 GodMode9 `.zip` 中的 `GodMode9.firm` 檔案到 SD 卡的 `/luma/payloads/` 資料夾中 1. 解壓 GodMode9 `.zip` 中的 `gm9` 資料夾到 SD 卡的根目錄底下 @@ -102,7 +103,7 @@ title: "完成安裝" #### 第六節 — 安裝 Luma3DS 至 CTRNAND 1. 關閉您的主機 -1. 開機時按住『Start』鍵啟動 GodMode9 +1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9 1. 當提示重要檔案備份時，按下『A』繼續，並在完畢後按下『A』繼續 1. 當提示修正 RTC 日期及時間時，按『A』繼續並設定日期及時間，再按『A』繼續 1. 按『Home』鍵以叫出主選單 @@ -150,18 +151,8 @@ ___ #### 額外訊息以及注意事項 -{% capture notice-10 %} -您現在可以透過 Luma3DS Updater 來更新您主機中的 Luma3DS，只要將它開啟，再按下『A』即可。 - -這跟系統更新是不一樣的；這只會下載並解壓最新的 Luma3DS 檔案。 - -這將更新您的 SD 卡和 CTRNAND 中的 Luma3DS 檔, 在您的裝置沒有 SD 卡時，裝置將自動載入 CTRNAND 中的檔案。 -{% endcapture %} - -
{{ notice-10 | markdownify }}
- {% capture notice-6 %} -您的主機現在在預設情況下將會自動於開機時啟動基於 SysNAND 的 Luma3DS 自製韌體。 +You will now boot Luma3DS CFW by default. 您現在可以在開機時透過按住『Select』鍵進入 Luma3DS 的設定選單。 @@ -177,7 +168,7 @@ ___ {% capture notice-6 %} 如果您想要升級到較大的 SD 卡，您只需要將您的 SD 卡格式化為 FAT32 並從您舊的 SD 卡中複製其內容至新的卡中即可。 -如果您的 SD 卡大於 32GB，那麼您得使用不同的工具以格式化該記憶卡；工具例如 Windows 上的 [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm)、Linux 上的 [gparted](http://gparted.org/download.php)、Mac 上的[磁碟工具程式](https://support.apple.com/en-gb/guide/disk-utility/format-a-disk-for-windows-computers-dskutl1010/mac)。 +If your new SD card is bigger than 32GB, then you have to use a different tool to format it, such as [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). {% endcapture %}
{{ notice-6 | markdownify }}
@@ -191,7 +182,7 @@ ___ 有關如何使用 Luma3DS 的各項功能，請見[他們的 wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage)。 {: .notice--success} -有關如何安裝自訂主題、及啟動畫面，請見 [Theme Plaza](https://themeplaza.eu/)。 +For information on installing custom themes and splash screens, check out [Theme Plaza](https://themeplaza.art/). {: .notice--success} For information on using Gateshark cheat codes on Luma3DS, check out [Checkpoint](https://github.com/FlagBrew/Checkpoint). diff --git a/_pages/zh_TW/flashing-ntrboot-(3ds-multi-system).txt b/_pages/zh_TW/flashing-ntrboot-(3ds-multi-system).txt index c51a0cb6d9..9a6db6c707 100644 --- a/_pages/zh_TW/flashing-ntrboot-(3ds-multi-system).txt +++ b/_pages/zh_TW/flashing-ntrboot-(3ds-multi-system).txt @@ -19,7 +19,7 @@ title: "寫入 ntrboot 漏洞 (透過多台 3DS 系統)" * 兩台 3DS 系列主機 + **3DS 始源機**：一台已安裝 boot9strap 的 3DS 系列主機 + **3DS 目標機**：一台已搭載原廠系統的主機 -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` 版的 boot9strap；非 `devkit` 檔案)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * 最新版的 [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) ### 操作說明 diff --git a/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt index 68f37709d9..d00d5b06bc 100644 --- a/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt +++ b/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt @@ -16,7 +16,7 @@ title: "寫入 ntrboot 漏洞 (透過單台 3DS 系統)" ### 必備項目 * 一張相容於 ntrboot 的燒錄卡 -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` 版的 boot9strap；非 `devkit` 檔案)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the devkit file)* * 最新版的 [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### 操作說明 diff --git a/_pages/zh_TW/flashing-ntrboot-(nds).txt b/_pages/zh_TW/flashing-ntrboot-(nds).txt index d788a725c6..fe9770c7a0 100644 --- a/_pages/zh_TW/flashing-ntrboot-(nds).txt +++ b/_pages/zh_TW/flashing-ntrboot-(nds).txt @@ -19,7 +19,7 @@ title: "寫入 ntrboot 漏洞 (透過 NDS)" * 兩台主機 + **始源 NDS / NDSL 主機**：一台可搭配您的燒錄卡使用的任天堂 DS 或 DS Lite 主機 + **3DS 目標機**：一台已搭載原廠系統的 3DS 系列主機 -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` 版的 boot9strap；非 `devkit` 檔案)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3-ntr.zip`; not the `devkit` file)* * 最新版的 [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) ### 操作說明 diff --git a/_pages/zh_TW/formatting-sd-(linux).txt b/_pages/zh_TW/formatting-sd-(linux).txt new file mode 100644 index 0000000000..86744b6f91 --- /dev/null +++ b/_pages/zh_TW/formatting-sd-(linux).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Linux)" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +本教學僅適用於 Linux 使用者。 If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### 操作說明 +#### Section I - Determining which slot your SD card is in + +1. Make sure your SD card is **not** inserted +1. Launch the Linux Terminal +1. Type `watch "lsblk"` +1. Insert your SD card into your PC +1. Observe the output. It should match something like this: +``` +NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT +mmcblk0 179:0 0 3,8G 0 disk +└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF +``` +1. Take note of the device mount point. In our example above, it was `mmcblk0` + + If `RO` is set to 1, make sure the lock switch is not slid down +1. Hit CTRL + C to exit the menu + +#### Section II - Formatting the card + +![](https://upload.wikimedia.org/wikipedia/commons/8/85/Cfdisk_screenshot.png) + +1. Type in `sudo cfdisk /dev/(device mount point from above)` +1. On each partition, hit `Delete` +1. Create a new Primary partition that covers the size of your entire SD card + + This will create a new partition with the linux filesystem +1. Select type and take a look at the menu +1. Find "W95 FAT32" and take note of the code on the left side of that text +1. Press any key, then enter the code you took note of in the previous step +1. Hit enter, then hit Quit diff --git a/_pages/zh_TW/formatting-sd-(mac).txt b/_pages/zh_TW/formatting-sd-(mac).txt new file mode 100644 index 0000000000..82f127bb36 --- /dev/null +++ b/_pages/zh_TW/formatting-sd-(mac).txt @@ -0,0 +1,60 @@ +--- +title: "Formatting SD (Mac)" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +本教學僅適用於 Mac 使用者。 If you are not on Mac, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Linux)](formatting-sd-(linux)) pages. + +### 操作說明 + +#### OS X El Capitan (10.11) and later + +1. 將 SD 卡插入至電腦中 +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. In the top-left "View" menu, choose "Show All Devices" +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Erase" at the top +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Ensure that "Scheme" is set to "Master Boot Record" + + If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume +1. Click "Erase" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +#### OS X Yosemite (10.10) and earlier + +1. 將 SD 卡插入至電腦中 +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run the Disk Utility app +1. Select your SD card in the left panel + + Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Click "Partition" at the top + + If "Partition" does not appear, make sure to choose the device instead of a volume +1. Ensure that "Partition Layout" is set to "1 Partition" +1. Enter anything for "Name" +1. Ensure that "Format" is set to "MS-DOS (FAT)" +1. Click "Options" below the partition table +1. Choose "Master Boot Record" +1. Click "OK" +1. Click "Apply" +1. Click "Partition" +1. Wait for the format to finish +1. Close Disk Utility +1. If the SD card had any files and folders on it before the format, copy everything back from your computer diff --git a/_pages/zh_TW/formatting-sd-(windows).txt b/_pages/zh_TW/formatting-sd-(windows).txt new file mode 100644 index 0000000000..6ed7f6953f --- /dev/null +++ b/_pages/zh_TW/formatting-sd-(windows).txt @@ -0,0 +1,43 @@ +--- +title: "Formatting SD (Windows)" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +This is an add-on section for formatting an SD card to work with the 3DS. + +If the 3DS already recognizes the SD card, this guide is not required. + +本教學僅適用於 Windows 使用者。 If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages. + +### 必備項目 + +* The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) + +### 操作說明 + +1. 將 SD 卡插入至電腦中 +1. If the SD card has any files and folders on it, copy everything to a folder on your computer +1. Run `guiformat.exe` +1. Select your SD card's drive letter for "Drive" + + Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive! + {: .notice--danger} + +1. Select a size for "Allocation unit size" + + If the SD card is 64GB or below, choose 32768 + * If the SD card is above 64GB, choose 65536 +1. Enter anything for "Volume label" +1. Ensure that "Quick Format" is selected +1. Click "Start" +1. Click "OK" +1. Wait for the format to finish +1. Click "Close" +1. If the SD card had any files and folders on it before the format, copy everything back from your computer + +### Common Errors + +* Failed to open device: GetLastError()=32 + + Close everything that may be using the SD card, such as any File Explorer windows. diff --git a/_pages/zh_TW/get-started-(new-3ds).txt b/_pages/zh_TW/get-started-(new-3ds).txt index e15eff2b66..e2c8c0bc17 100644 --- a/_pages/zh_TW/get-started-(new-3ds).txt +++ b/_pages/zh_TW/get-started-(new-3ds).txt @@ -1,68 +1,54 @@ --- -title: "新手入門 (New 3DS)" +title: "Get Started (New 3DS)" --- {% include toc title="條目內容" %} ### 必讀事項 -請於下表中選擇與您系統版本相符的頁面。 請注意，在『從』和『到』區域中的任何版本將包括在內。 比方說，『從 9.0.0 到 9.2.0』，包括著9.0.0版、9.1.0版和 9.2.0版。 - -另外請注意，系統版本的最後一個數字 (前面是破折號) 指的是您的瀏覽器版本。 目前，瀏覽器版本與本教學中的 New 3DS 無關。 - -**如果您因缺少某些先決條件而無法使用對應您系統版本的改機方法，請見表格中適用於任意系統的『所有版本』行。** - -所有系統版本都可以透過[卡帶更新](cart-update)中所提到的步驟或透過系統更新以升級至更新的版本。 +請於下表中選擇與您系統版本相符的頁面。 請注意，在『從』和『到』區域中的任何版本將包括在內。 主機版本可以在『系統設置 (System Settings)』中的上方螢幕的右下角找到。 ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### 版本列表 - + - - - + + + - - - - - - - + + - - - - - - + - - + + - - - + + - +
從到從到使用方法
2.1.02.1.0安裝 boot9strap (透過 2xrsa)
8.1.08.1.01.0.011.3.0 安裝boot9strap (透過 Soundhax)
9.0.011.3.0Homebrew Launcher (透過 Soundhax)
11.4.011.7.0請見『任意版本』11.13.0Installing boot9strap (SSLoth-Browser)
11.8.011.8.0安裝 boot9strap (透過 DSiWare)11.14.0 (latest version)Installing boot9strap (Browser)
任意版本

安裝 boot9strap (透過 ntrboothax)
(需使用可相容的燒錄卡)

or

安裝 boot9strap (透過硬改)
(需焊接)

安裝 boot9strap (透過 ntrboothax)
(需使用可相容的燒錄卡)

or

安裝 boot9strap (透過硬改)
(需焊接)
diff --git a/_pages/zh_TW/get-started-(old-3ds).txt b/_pages/zh_TW/get-started-(old-3ds).txt index 9334d961e1..2dcc4cea94 100644 --- a/_pages/zh_TW/get-started-(old-3ds).txt +++ b/_pages/zh_TW/get-started-(old-3ds).txt @@ -1,26 +1,21 @@ --- -title: "新手入門 (舊型 3DS)" +title: "Get Started (Old 3DS)" --- {% include toc title="條目內容" %} ### 必讀事項 -請於下表中選擇與您系統版本相符的頁面。 請注意，在『從』和『到』區域中的任何版本將包括在內。 比方說，『從 9.0.0 到 9.2.0』，包括著9.0.0版、9.1.0版和 9.2.0版。 - -另外請注意，表格的最後兩列可以參考您系統版本結尾的數字 (此為系統安裝的瀏覽器版本)。 若系統版本結尾為『-0』，這就表示您系統並未安裝瀏覽器；若為任何其他大於『-0』的數字，這就表示您系統已安裝瀏覽器。 - -舉例來說，版本 5.0.0-0U 將到『無瀏覽器』行及『5.0.0 到 5.1.0』列，因為此系統版本是在 5.0.0 到 5.1.0 間，且沒有安裝網頁瀏覽器。 - -**如果您因缺少某些先決條件而無法使用對應您系統版本的改機方法，請見表格中適用於任意系統的『所有版本』行。** - -所有系統版本都可以透過[卡帶更新](cart-update)中所提到的步驟或透過系統更新以升級至更新的版本。 +請於下表中選擇與您系統版本相符的頁面。 請注意，在『從』和『到』區域中的任何版本將包括在內。 主機版本可以在『系統設置 (System Settings)』中的上方螢幕的右下角找到。 ![]({{ "/images/screenshots/system-version.png" | absolute_url }}) {: .notice--info} +While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} + ### 版本列表 @@ -33,49 +28,23 @@ title: "新手入門 (舊型 3DS)" - - + - - - - - - - - - - - - - - - - - - - - - - - - - - + - - - - + + + + - + -
從 到無瀏覽器瀏覽器使用方法
1.0.02.0.0使用『所有版本』的方法
2.1.02.1.0請見『任意版本』安裝 boot9strap (透過 2xrsa)
2.2.02.2.0使用『所有版本』的方法
3.0.08.1.0安裝 boot9strap (透過 Soundhax)
9.0.0 11.3.0Homebrew Launcher (透過 Soundhax)
11.4.011.7.0使用『所有版本』的方法安裝boot9strap (透過 Soundhax)
11.8.011.8.0安裝 boot9strap (透過 DSiWare)
11.4.011.14.0Installing boot9strap (safecerthax)
任意版本

安裝 boot9strap (透過 ntrboothax)
(需使用可相容的燒錄卡)

or

安裝 boot9strap (透過硬改)
(需焊接)

安裝 boot9strap (透過 ntrboothax)
(需使用可相容的燒錄卡)

or

安裝 boot9strap (透過硬改)
(需焊接)
\ No newline at end of file + diff --git a/_pages/zh_TW/get-started.txt b/_pages/zh_TW/get-started.txt index aacf8f11d3..e7e03644d3 100644 --- a/_pages/zh_TW/get-started.txt +++ b/_pages/zh_TW/get-started.txt @@ -6,85 +6,16 @@ title: "新手入門" ### 必讀事項 -請於下表中選擇與您系統版本相符的頁面。 請注意，在『從』和『到』區域中的任何版本將包括在內。 比方說，『從 9.0.0 到 9.2.0』，包括著9.0.0版、9.1.0版和 9.2.0版。 - -主機版本可以在『系統設置 (System Settings)』中的上方螢幕的右下角找到。 - -![]({{ "/images/screenshots/system-version.png" | absolute_url }}) -{: .notice--info} - -**如果您因缺少某些先決條件而無法使用對應您系統版本的改機方法，請更新至最新的系統版本或見表格中適用於任意系統的『任意版本』行。** - -所有系統版本都可以透過[卡帶更新](cart-update)中所提到的步驟或透過系統更新以升級至更新的版本。 - -如果您先前已改機過，且已經安裝了基於 EmuNAND 的自製韌體，請在 SysNAND 上進行本教學的所有操作。 覆蓋所有現有檔案。 您的資料最終將會從 EmuNAND 移植到您新的 B9S 系統上。 如果您有使用 menuhax，您應先[清除 HOME 主選單的 extdata](troubleshooting#clear-home-menu-extdata) 再行繼續。 - -本頁面將帶領您安裝 boot9strap 至*原廠尚未改機*的 3DS 或 2DS 上。 如果您先前已經安裝了 arm9loaderhax 而且您想要更新至 boot9strap，請依照[升級 A9LH 至 boot9strap](a9lh-to-b9s) 的步驟進行。 -{: .notice--primary} - -在開始前，Windows 使用者應該先透過[顯示副檔名 (Windows)](file-extensions-(windows))教學將副檔名顯示！ -{: .notice--info} - -在開始前，建議先透過 [H2testw (Windows)](h2testw-(windows))、[F3 (Linux)](f3-(linux))、或 [F3X (Mac)](f3x-(mac)) 來檢查您主機的 SD 卡有沒有問題！ +If you have hacked your 3DS in the past, or you purchased your 3DS second-hand, it is possible that your console already has custom firmware. You should [check for CFW](checking-for-cfw) before proceeding. {: .notice--warning} -{% capture notice-1 %} -While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free". +Different device models, versions, and regions will require different steps to achieve the end goal of boot9strap powered Custom Firmware. This page will help you find where to start for your device. -You should avoid the following actions: -1. Piracy -1. Cheating online -1. Suspicious behaviour on eShop (for example, credit card chargebacks) +The colors of the devices in the image may vary, but note the button placement and features of each device carefully to ensure you select the correct one. -We believe SpotPass and StreetPass are also safe for use at this time. -{% endcapture %} +Click the image of your device to take you to the appropriate page. -
{{ notice-1 | markdownify }}
- -### 版本列表 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
從到使用方法
1.0.02.0.0升級至最新版本或使用『任意版本』的方法
2.1.08.1.0安裝boot9strap (透過 Soundhax)
9.0.011.3.0Homebrew Launcher (Soundhax)
11.4.011.12.0升級至最新版本或使用『任意版本』的方法
11.13.011.13.0Homebrew Launcher (BrowserHax 2020)
任意版本

安裝 boot9strap (透過 ntrboothax)
(需使用可相容的燒錄卡)

or

安裝 boot9strap (透過硬改)
(需焊接)

+| New 3DS or New 2DS | Old 3DS or Old 2DS | +|:-:|:-:| +| [![New 3DS](/images/new3ds.png)](get-started-(new-3ds))    [![New 3DS XL](/images/new3dsxl.png)](get-started-(new-3ds))

[![New 2DS XL](/images/new2dsxl.png)](get-started-(new-3ds)) | [![Old 3DS](/images/old3ds.png)](get-started-(old-3ds))    [![Old 3DS XL](/images/old3dsxl.png)](get-started-(old-3ds))

[![2DS](/images/2ds.png)](get-started-(old-3ds)) | diff --git a/_pages/zh_TW/godmode9-usage.txt b/_pages/zh_TW/godmode9-usage.txt index 283d16c748..d84be1ad23 100644 --- a/_pages/zh_TW/godmode9-usage.txt +++ b/_pages/zh_TW/godmode9-usage.txt @@ -4,7 +4,7 @@ title: "如何使用 GodMode9 " {% include toc title="條目內容" %} -不論寫腳本、獲得更新訊息或更多訊息，您能加入 [GodMode9 的 Discord 伺服器](https://discord.gg/EGu6Qxw) 以獲得更多幫助。 +For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/BRcbvtFxX4). {: .notice--primary} ### 必讀事項 diff --git a/_pages/zh_TW/home.txt b/_pages/zh_TW/home.txt index c1e3836b5e..b2048c91d2 100644 --- a/_pages/zh_TW/home.txt +++ b/_pages/zh_TW/home.txt @@ -66,7 +66,7 @@ boot9strap 是目前最新且最棒的自製韌體啟動方式，有點像 Wii ## 我可以透過自製韌體做些什麼？ + 遊玩任一區的遊戲卡帶或電子商店 (eShop) 上的遊戲 -+ 透過[社群所製的主題及啟動畫面](https://themeplaza.eu/)以個人化您的 HOME 選單 ++ Customize your HOME Menu with user-created [themes and splash screens](https://themeplaza.art/) + 套用金手指 + 遊戲或軟體截圖 + 備份、修改、還原許多遊戲的存檔 @@ -81,11 +81,11 @@ boot9strap 是目前最新且最棒的自製韌體啟動方式，有點像 Wii + **在開始前，您一定得注意 3DS 改機的風險：每當您修改系統時，都有可能造成無法挽回的磚機。 這種情況是滿罕見的，但還是有可能的；所以請確實遵守每一個步驟。** + 如果您之前已透過 EmuNAND 的方式改機，而您現在想把您之前的 EmuNAND 移植到您新的 SysNAND 自製韌體底下，您可以在依正常步驟進行，並在[完成安裝](finalizing-setup)這一步中依照提示還原的您 EmuNAND。 -+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below. ++ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions and all versions, including the latest version (11.14.0). + 如果一切都順利的話，您將不會失去任何資料 (像是遊戲、NNID、存檔... 等都會被留下)。 + 請在充電的情況下改機，以確保途中不會因為電力關係而突然關機造成資料遺失或甚至毀損！ + 您的 SD 卡應為 [MBR 格式，而非 GPT](http://www.howtogeek.com/245610/) (原廠 SD 卡一律都是以 MBR 格式出廠)。 The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR. -+ 如果您需要格式化一張新的 SD 卡，您可使用 [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) 並且將其配置單位設為 32K (32768)。 ++ If you need to format a brand new SD card, you can format it to FAT32 using [guiformat (Windows)](formatting-sd-(windows)), [Disk Utility (Mac)](formatting-sd-(mac)), or [cfdisk (Linux)](formatting-sd-(linux)). + 舊型 2DS 與舊型 3DS 的軟體是幾乎一樣的；New 2DS 與 New 3DS 也是同樣的道理。 因此，任何提及「舊型 3DS」的步驟將套用於「舊型 2DS」；而任何提及「New 3DS」的步驟也將套用於「New 2DS」。 ___ diff --git a/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt b/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt index d9b4812ea5..487f25a45c 100644 --- a/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt +++ b/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt @@ -2,65 +2,5 @@ title: "Homebrew Launcher (BrowserHax 2020)" --- -{% include toc title="條目內容" %} - -### 必讀事項 - -This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser. - -### Compatibility Testing - -To use this method, your console must be from a compatible region with a compatible browser version. - -You can check these details from System Settings. - -1. Open System Settings. -1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`. - + The 45 is your browser version, and the letter is your region - + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option - + E designates EUROPE - + U designates USA - + J designates JAPAN - + If your console has a letter other than any of these three, it is not compatible with this method. -1. Remember your region designation. You will need to know this later. - -### 必備項目 - -* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)] - + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png) -* An active WiFi connection on your console - -### 操作說明 - -#### 第一節 — 準備工作 - -1. Power off your console and remove the SD card -1. Connect the SD card to your computer -1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card - + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it -1. In the BrowserHax release archive, open the folder corresponding to your console's region -1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card - + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory - -#### Section II - BrowserHax - -1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer -1. Safely remove your SD card from your computer and put it back in your console -1. Power on your console and ensure it is connected to an active WiFi network -1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together - + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods) - + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/` -1. Use the QR scanner to scan the QR code you opened in the first step -1. Tap the "PROCEED TO HAXX" button -1. 等待程序完畢為止 - + If it displays a yellow screen, power your console off, then try this section again -1. 如果漏洞成功執行，您的主機將自動載入 Homebrew Launcher - + You may see an error stating that no applications were found. If this occurs, proceed to the next steps -1. Leave your console on and proceed to the next section below - - -___ - -### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) -{: .notice--primary} \ No newline at end of file +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/zh_TW/homebrew-launcher-(pichaxx).txt b/_pages/zh_TW/homebrew-launcher-(pichaxx).txt index dd36122850..1c8a93df52 100644 --- a/_pages/zh_TW/homebrew-launcher-(pichaxx).txt +++ b/_pages/zh_TW/homebrew-launcher-(pichaxx).txt @@ -4,11 +4,14 @@ title: "Homebrew Launcher (PicHaxx)" {% include toc title="條目內容" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### 必讀事項 This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop. -If your device already has access to the Homebrew Launcher (whether through pichaxx or another exploit), you can skip to [DSiWare Dumper](dsidumper)). +If your device already has access to the Homebrew Launcher (whether through PicHaxx or another exploit), you can skip to [Frogtool](installing-boot9strap-(frogtool)). {: .notice--success} If you already have Pokemon Picross, this process will overwrite your game's save file! @@ -19,7 +22,8 @@ If you already have Pokemon Picross, this process will overwrite your game's sav * The free eShop game "Pokemon Picross" * 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 * 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* +* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region, device, and version)* + + If your current version is 11.14.0-46, select 11.13.0-45 for your version ### 操作說明 @@ -27,26 +31,26 @@ If you already have Pokemon Picross, this process will overwrite your game's sav 1. 將 `boot.3dsx` 複製到 SD 卡根目錄中 1. 複製 otherapp 啟動程式到 SD 卡的根目錄底下，並重新命名其檔名為 `otherapp.bin` - + if you do not see the `.bin` extension, do not add it to the end of the filename + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. 在 SD 卡的根目錄底下建立一個新資料夾 `3ds` #### Section II - PicHaxx -1. Open [the PicHaxx Injector website](https://seedminer.hacks.guide/pichaxx/) on your computer +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer 1. 上傳您的 `movable.sed` 檔案 1. Select "Build and Download" 1. 等待程序完畢為止 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card - + 此 `` 字串將與您在 [Seedminer](seedminer) 中所使用的字串一樣 - + This `` folder will be another 32 letter/number folder inside the `` folder -1. Copy the new downloaded `00000001.sav` file to the `data` folder on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + 如提示時複寫遊戲存檔 1. 將 SD 卡插回主機中 1. 啟動您的主機 1. Launch "Pokemon Picross" 1. 如果漏洞成功執行，您的主機將自動載入 Homebrew Launcher - + 您可能會看見無可用應用程式的錯誤訊息。 -1. 關閉您的主機。 + + You may see an error stating there are no applications found +1. 關閉您的主機 ___ diff --git a/_pages/zh_TW/homebrew-launcher-(soundhax).txt b/_pages/zh_TW/homebrew-launcher-(soundhax).txt index b72ea61b15..117c6132bd 100644 --- a/_pages/zh_TW/homebrew-launcher-(soundhax).txt +++ b/_pages/zh_TW/homebrew-launcher-(soundhax).txt @@ -16,7 +16,7 @@ Soundhax (與 Homebrew Launcher 使用時) 可與韌體版本 9.0.0 至 11.3.0 請注意，卡帶更新只會更新系統的核心組件，像是系統設定、HOME 主選單等。 卡帶更新不會更新『任天堂 3DS 音樂 (Nintendo 3DS Sound)』程式或是線上下載的功能，如軟體和資料轉移、網頁瀏覽器、擦身通信 Mii 廣場、或是電子商店 (eShop)。 -這也就是說，如果本身系統版本有安裝較舊版的『任天堂 DS 音樂 (Nintendo 3DS Sound)』程式 *(低於 <3.0.0 之版本)* 且透過含有較新版本音樂撥放器的卡帶進行更新，Soundhax 漏洞將無法正常執行！ 您將會需要透過[另一個方法](homebrew-launcher-(alternatives))才能使用 Homebrew Launcher。 +This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! 您將會需要透過[另一個方法](homebrew-launcher-(alternatives))才能使用 Homebrew Launcher。 {% endcapture %}
{{ notice-1 | markdownify }}
@@ -24,12 +24,13 @@ Soundhax (與 Homebrew Launcher 使用時) 可與韌體版本 9.0.0 至 11.3.0 ### 必備項目 * 最新版的 [Soundhax](http://soundhax.com) *(對應您主機的區域、型號、及版本的檔案)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* * 最新版的 [safehax](https://github.com/TiniVi/safehax/releases/latest) *(`.3dsx` 檔案)* * 最新版的 [udsploit](https://github.com/smealum/udsploit/releases/latest) -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* [otherapp payload 檔案](https://smealum.github.io/3ds/#otherapp) *(選擇對應您主機的區域及型號的檔案)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The [otherapp payload](https://smealum.github.io/3ds/#otherapp) *(for your region, device, and version)* ### 操作說明 diff --git a/_pages/zh_TW/homebrew-launcher-(steelhax).txt b/_pages/zh_TW/homebrew-launcher-(steelhax).txt index e36033ed75..e6e387a576 100644 --- a/_pages/zh_TW/homebrew-launcher-(steelhax).txt +++ b/_pages/zh_TW/homebrew-launcher-(steelhax).txt @@ -2,62 +2,5 @@ title: "安裝 Homebrew Launcher (透過 Steelhax)" --- -{% include toc title="條目內容" %} - -### 必讀事項 - -Seedminer 將使用您的 `movable.sed` 檔案並透過 Steelhax 漏洞開啟 Homebrew Launcher 以便在 DS 網路設定中植入修改後的 DSiWare 程式。 於使用此指南時，您必須先擁有 (或下載) eShop 中免費的『Steel Driver: Sub Wars』遊戲。 - -If your device already has access to the Homebrew Launcher (whether through Steelhax or another exploit), you can skip to [DSiWare Dumper](dsidumper)). -{: .notice--success} - -如果您先前已安裝『Steel Diver: Sub Wars』，此過程將會複寫您先前的存檔! +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. {: .notice--warning} - -### 必備項目 - -* eShop 中免費的『Steel Diver: Sub Wars』遊戲 -* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 -* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* The latest release of [Steelhax](https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip) -* The [otherapp payload](https://deadphoenix8091.github.io/3ds/#otherapp) *(for your region and version)* - -### 操作說明 - -#### 第一節 — 準備工作 - -1. 在 SD 卡的根目錄底下建立一個新資料夾 `3ds` -1. 將 `boot.3dsx` 複製到 SD 卡根目錄中 -1. Copy the `steelhax` folder from the `Steelhax-release.zip` to the root of your SD card -1. 複製 otherapp 啟動程式到 SD 卡的 `steelhax` 資料夾中，並重新命名其檔名為 `payload.bin` - -#### 第二節 — Steelminer - -1. 將 SD 卡插入主機中 -1. 啟動『Steel Diver: Sub Wars』並選擇任一 Mii 進行初始化 - + 如果出現更新提示，請拒絕 - + 如果您先前已更新了此遊戲，請透過主機的系統設定至資料管理中刪除遊戲更新 -1. 退出『Steel Diver: Sub Wars』 -1. 關閉您的主機 -1. 將 SD 卡插入至電腦中 -1. Open [the Steelminer Injector website](https://seedminer.hacks.guide/steelhax/) on your computer -1. 上傳您的 `movable.sed` 檔案 -1. 選擇『Start!』 -1. 等待程序完畢為止 -1. 在您的 SD 卡中開啟 `Nintendo 3DS` -> `` -> `<32-字元-id>` -> `title` -> `00040000` -> `<8-字元-區碼>` -> `data` - + **歐版**: `000d7e00` - + **日版**: `000d7c00` - + **美版**: `000d7d00` -1. 將您所下載的存檔複製至您 SD 卡中的 `data` 資料夾 - + 如提示時複寫遊戲存檔 -1. 將 SD 卡插回主機中 -1. 啟動您的主機 -1. 啟動『Steel Diver: Sub Wars』 -1. 如果漏洞成功執行，您的主機將自動載入 Homebrew Launcher - + 您可能會看見無可用應用程式的錯誤訊息。 -1. 關閉您的主機。 - -___ - -### Continue to [DSiWare Dumper](dsidumper) -{: .notice--primary} diff --git a/_pages/zh_TW/installing-boot9strap-(browser).txt b/_pages/zh_TW/installing-boot9strap-(browser).txt index ca87644d95..ea5ba6cc94 100644 --- a/_pages/zh_TW/installing-boot9strap-(browser).txt +++ b/_pages/zh_TW/installing-boot9strap-(browser).txt @@ -4,11 +4,19 @@ title: "安裝 boot9strap (透過網頁瀏覽器)" {% include toc title="條目內容" %} +### 必讀事項 + +new-browserhax-xl (when combined with universal-otherapp) is compatible with version 11.14.0 on New 3DS and New 2DS in all regions. + +This exploit will not work on the Old 3DS, Old 3DS XL, or Old 2DS. Please ensure that the device you are modding is a New 3DS, New 3DS XL, or New 2DS XL before continuing. +{: .notice--info} + ### 必備項目 +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### 操作說明 @@ -16,24 +24,21 @@ title: "安裝 boot9strap (透過網頁瀏覽器)" 1. 關閉您的主機 1. 將 SD 卡插入至電腦中 +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` -1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 -1. 解壓 SafeB9SInstaller `.zip` 的 `SafeB9SInstaller.dat` 及 `Launcher.dat` 至 SD 卡的根目錄中 - - ![]({{ "/images/screenshots/boot9strap-browser-file-layout.png" | absolute_url }}) - {: .notice--info} - +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. 將 SD 卡插回主機中 1. 啟動您的主機 #### 第二節 — 啟動 SafeB9SInstaller -1. 啟動主機上的網頁瀏覽器，並開啟下列網址的其中之一 - + `https://dukesrg.github.io/?SafeB9SInstaller.dat` - + `http://www.reboot.ms/3ds/load.html?Launcher.dat` - + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last two) +1. 啟動您的主機 +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser manually type the URL instead (`https://zoogie.github.io/web/nbhax-xl/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax-xl&qzone=1&margin=0&size=400x400&ecc=L) + 如果遇到錯誤的話， [請依循此疑難排解之步驟](troubleshooting#a-browser-based-exploit-is-not-working) 1. 如果一切成功的話，您將自動進入 SafeB9SInstaller @@ -50,7 +55,6 @@ title: "安裝 boot9strap (透過網頁瀏覽器)" 1. 透過方向鍵及『A』以開啟下列選項： + **『Show NAND or user string in System Settings』** 1. 按『Start』鍵以存檔並重新啟動系統 - + 如果您遇到了錯誤訊息，繼續到下一頁即可 ___ diff --git a/_pages/zh_TW/installing-boot9strap-(fredtool).txt b/_pages/zh_TW/installing-boot9strap-(fredtool).txt index b616098b18..50f700b2ad 100644 --- a/_pages/zh_TW/installing-boot9strap-(fredtool).txt +++ b/_pages/zh_TW/installing-boot9strap-(fredtool).txt @@ -4,6 +4,9 @@ title: "安裝 Boot9strap (透過 Fredtool)" {% include toc title="條目內容" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### 必讀事項 This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool. @@ -12,11 +15,11 @@ This method of using Seedminer for further exploitation uses your `movable.sed` ### 必備項目 -* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3) or [DSiWare Dumper](dsidumper)) +* A DSiWare Backup (such as the one on SD root from [BannerBomb3](bannerbomb3)) * 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 * 最新版的 [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) * 最新版的 [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### 第一節 — 準備工作 @@ -28,18 +31,18 @@ This method of using Seedminer for further exploitation uses your `movable.sed` #### 第二節 — Fredtool -1. 於您的電腦中開啟 [Fredtool](https://fredtool.bruteforcemovable.com/) +1. Open [Fredtool](https://3ds.nhnarwhal.com/3dstools/fredtool.php) on your computer 1. 在『Your movable.sed』欄位中選擇您的 `movable.sed` 檔案 1. Select your DSiWare Backup (`<8-character-id>.bin`) file for the "Your dsiware.bin" field 1. 完成「我不是機器人」之驗證 1. 選擇『Start』 1. 等待程序完畢為止 1. 當該程序結束時，在該網站中下載修改後的 DSiWare 檔案 - + This file contains 2 dsiware backup files, one clean (unmodified) and one hax (exploited) + + This file contains 2 DSiWare backup files, one clean (unmodified) and one hax (exploited) 1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card - + 此 `` 字串將與您在 [Seedminer](seedminer) 中所使用的字串一樣 - + This `` folder will be another 32 letter/number folder inside the `` folder - + If the `Nintendo DSiWare` folder does not exist, create it inside the `` folder + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If the `Nintendo DSiWare` folder does not exist, create it inside of the `` 1. Copy the `42383841.bin` file from the `output/hax/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo DSiWare` folder 1. 將 SD 卡插回主機中 1. 啟動您的主機 @@ -87,7 +90,7 @@ This method of using Seedminer for further exploitation uses your `movable.sed` 1. 關閉您的主機 1. 將 SD 卡插入至電腦中 -1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS//<32-character-id>/Nintendo DSiWare/` folder on your SD card +1. Copy the `42383841.bin` file from the `output/clean/` folder of the downloaded DSiWare archive (`fredtool_output.zip`) to the `Nintendo 3DS///Nintendo DSiWare/` folder on your SD card + 請替換現有的`42383841.bin`檔案 1. 將 SD 卡插回主機中 1. 啟動您的主機 diff --git a/_pages/zh_TW/installing-boot9strap-(frogtool).txt b/_pages/zh_TW/installing-boot9strap-(frogtool).txt index 4cf390d673..79f29a76f3 100644 --- a/_pages/zh_TW/installing-boot9strap-(frogtool).txt +++ b/_pages/zh_TW/installing-boot9strap-(frogtool).txt @@ -4,6 +4,9 @@ title: "安裝 Boot9strap (透過 Frogtool)" {% include toc title="條目內容" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### 必讀事項 我們現在將透過 Homebrew Launcher 來啟動 Frogtool。此工具將植入可運行漏洞的『うごくメモ帳 (Flipnote Studio)』遊戲。我們將透過這項安全性漏洞運行 b9sTool 並安裝 boot9strap。 @@ -18,14 +21,14 @@ title: "安裝 Boot9strap (透過 Frogtool)" * - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce) * 最新版的 [Frogtool](https://github.com/zoogie/Frogtool/releases/latest) * 最新版的 [b9sTool](https://github.com/zoogie/b9sTool/releases/latest) -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### 第一節 — 準備工作 1. 將 SD 卡插入至電腦中 1. 將 `moving.sed` 檔案複製到 SD 卡的根目錄中 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `boot.nds` (B9STool) from the b9sTool release `.zip` to the root of your SD card +1. Copy `boot.nds` (b9sTool) from the b9sTool release `.zip` to the root of your SD card 1. 將 `Frogtool.3dsx` 複製到 SD 卡中的 `/3ds/` 資料夾底下 1. 複製 `frogcert.bin` 到 SD 卡根目錄中 1. 將 SD 卡插回主機中 @@ -74,6 +77,26 @@ title: "安裝 Boot9strap (透過 Frogtool)" 1. 按『Start』鍵以存檔並重新啟動系統 + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +#### Section V - Restoring DS Download Play + +1. 啟動『下載通信(Download Play)』程式 (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}) +1. Wait until you see the two buttons + + Do not press either of the buttons +1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu +1. 選擇『Miscellaneous options』 +1. 選擇『Switch the hb. title to the current app.』 +1. 按『B』繼續 +1. 按『B』回到 Rosalina 主選單 +1. 按『B』退出 Rosalina 選單 +1. 按『Home』鍵，並關閉『下載通信 (Download Play)』程式 +1. Relaunch the Download Play application +1. 您的主機應該就會啟動 Homebrew Launcher 了 +1. 於 Homebrew 清單內啟動 Frogtool +1. Select the "RESTORE patched DS Download Play" option +1. Once this operation has finished, read the screens and check if the process was successful + + If there are any errors or missing files, correct the problem and try again +1. If the process was successful, tap the touch screen, then press START to exit + ___ ### 繼續至[完成安裝](finalizing-setup) diff --git a/_pages/zh_TW/installing-boot9strap-(hardmod).txt b/_pages/zh_TW/installing-boot9strap-(hardmod).txt index 5d5f0ccab8..66124c2de5 100644 --- a/_pages/zh_TW/installing-boot9strap-(hardmod).txt +++ b/_pages/zh_TW/installing-boot9strap-(hardmod).txt @@ -22,7 +22,7 @@ title: "安裝 boot9strap (透過硬改)" * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* * 最新版的 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) + Windows 使用者可使用已編譯的 `.exe` 檔，而 Mac 及 Linux 使用者得先安裝 [Python 3](https://www.python.org/downloads/) 才能執行 `.py` 檔 -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) * 對應您主機型號及版本的 `.firm` 檔案： | 系統版本 | 內核版本 | 舊型 3DS 或 舊型 2DS | New 3DS 或 New 2DS | diff --git a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt index 85793a1c36..a42d09cecd 100644 --- a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt +++ b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt @@ -2,82 +2,5 @@ title: "Installing boot9strap (HBL-USM)" --- -{% include toc title="條目內容" %} - -### 必讀事項 - -In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. - -As we already have Homebrew access, we can use slotTool to do this. - -This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)). - -If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)). - -Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile. - -These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. - -If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} - -### 必備項目 - -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) - -#### 第一節 — 準備工作 - -1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide -1. Launch slotTool from the list of homebrew - + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section -1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option - + You will see some on-screen text and then your system will shut down -1. Remove your SD card from your console and connect it to your computer -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files -1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card -1. Put your SD card back into your console - -#### Section II - unSAFE_MODE - -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Keep holding the buttons until the console boots into Safe Mode -1. Press "OK" to accept the update - + There is no update. This is part of the exploit -1. Press "I accept" to accept the terms and conditions -1. The update will eventually fail, with error code `003-1099`. This is intended behaviour -1. When asked "Would you like to configure Internet settings?", select "Yes" -1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` - + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) -1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration - -#### 第三節 — 設定 Luma3DS - -1. Your device should automatically show the Luma Configuration menu -1. 透過方向鍵及『A』以開啟下列選項： - + **『Show NAND or user string in System Settings』** -1. 按『Start』鍵以存檔並重新啟動系統 - + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) - -#### Section IV - Restoring WiFi Configuration Profiles - -1. 啟動『下載通信 (Download Play)』程式 -1. Wait until you see the two buttons - + Do not press either of the buttons -1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu -1. 選擇『Miscellaneous options』 -1. 選擇『Switch the hb. title to the current app.』 -1. 按『B』繼續 -1. 按『B』回到 Rosalina 主選單 -1. 按『B』退出 Rosalina 選單 -1. 按『Home』鍵，並關閉『下載通信 (Download Play)』程式 -1. Relaunch the Download Play application -1. 您的主機應該就會啟動 Homebrew Launcher 了 -1. Launch slotTool from the list of homebrew -1. Select "RESTORE original wifi slots 1,2,3" -1. Your device will then reboot - -___ - -### 繼續至[完成安裝](finalizing-setup) -{: .notice--primary} +This page has been removed because the method used is outdated. Please follow a modern method linked on the [Get Started](get-started) page. +{: .notice--warning} diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt index 41376c0108..47e9bdc07a 100644 --- a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt +++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt @@ -13,25 +13,25 @@ title: "安裝 boot9strap (透過 ntrboot)" * 一塊能使您主機進入睡眠模式的磁鐵 (僅適用於折疊式主機) * 一張已寫入 ntrboot 漏洞的燒錄卡 * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### 操作說明 #### 第一節 — 準備工作 1. 關閉您的主機 -1. 將 SD 卡插入至電腦中 +1. Insert your console's SD card into your computer + 這指的是 3DS 的 SD 卡，*非*燒錄卡中的 SD 卡 -1. 將 `SafeB9SInstaller.firm` 複製於 SD 卡中的根目錄，並將其命名為 `boot.firm` -1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` -1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 +1. Copy `SafeB9SInstaller.firm` to the root of your console's SD card and rename it to `boot.firm` +1. Copy `boot.3dsx` from the Luma3DS `.zip` to the root of your console's SD card +1. Create a folder named `boot9strap` on the root of your console's SD card +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your console's SD card ![]({{ "/images/screenshots/boot9strap-ntrboot-file-layout.png" | absolute_url }}) {: .notice--info} -1. 將 SD 卡插回主機中 +1. Reinsert your SD card into your 3DS 1. 啟動您的主機 #### 第二節 — ntrboot diff --git a/_pages/zh_TW/installing-boot9strap-(pichaxx).txt b/_pages/zh_TW/installing-boot9strap-(pichaxx).txt new file mode 100644 index 0000000000..9197dfcb96 --- /dev/null +++ b/_pages/zh_TW/installing-boot9strap-(pichaxx).txt @@ -0,0 +1,69 @@ +--- +title: "Installing boot9strap (PicHaxx)" +--- + +{% include toc title="條目內容" %} + +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + +### 必讀事項 + +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used with universal-otherapp to run SafeB9SInstaller. + +### 必備項目 + +* The game "Pokémon Picross" (free on eShop) +* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 +* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) + +### 操作說明 + +#### 第一節 — 準備工作 + +1. 關閉您的主機 +1. 將 SD 卡插入至電腦中 +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` +1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card + +#### Section II - PicHaxx + +1. Open [the PicHaxx Injector website](https://3ds.nhnarwhal.com/3dstools/pichaxx.php) on your computer +1. 上傳您的 `movable.sed` 檔案 +1. Select "Build and Download" +1. 等待程序完畢為止 +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `title` -> `00040000` -> `0017c100` -> `data` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` +1. Copy the newly downloaded `00000001.sav` file to the `data` folder on your SD card + + 如提示時複寫遊戲存檔 +1. 將 SD 卡插回主機中 +1. 啟動您的主機 +1. Launch "Pokemon Picross" +1. If the exploit was successful, your device will have booted into SafeB9SInstaller + +#### 第三節 — 安裝 boot9strap + +1. 等待所有安全性檢查完畢 +1. 出現提示時，輸入提示的按鍵組合以安裝 boot9strap +1. 過程結束後，按下『A』重啟主機 + +#### 第四節 — 設定 Luma3DS + +1. 您的主機將會重啟至 Luma3DS 設定選單中 + + 如果黑屏，[請依循本疑難排解之步驟](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. 透過方向鍵及『A』以開啟下列選項： + + **『Show NAND or user string in System Settings』** +1. 按『Start』鍵以存檔並重新啟動系統 + + 如果您遇到了錯誤訊息，繼續到下一頁即可 + +___ + +### 繼續至[完成安裝](finalizing-setup) +{: .notice--primary} diff --git a/_pages/zh_TW/installing-boot9strap-(safecerthax).txt b/_pages/zh_TW/installing-boot9strap-(safecerthax).txt new file mode 100644 index 0000000000..d369ba2a04 --- /dev/null +++ b/_pages/zh_TW/installing-boot9strap-(safecerthax).txt @@ -0,0 +1,85 @@ +--- +title: "Installing boot9strap (safecerthax)" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +safecerthax is compatible with all Old 3DS and Old 2DS devices in all regions. + +If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, or your ISP is rerouting DNS changes, you will need to use an alternate method, like [Seedminer](seedminer). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. +{: .notice--warning} + +This exploit will not work on the New 3DS, New 3DS XL, or New 2DS XL. Please ensure that the device you are modding is an Old 3DS, Old 3DS XL, or Old 2DS before continuing. +{: .notice--info} + +### 必備項目 + +* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### 操作說明 + +#### 第一節 — 準備工作 +1. 關閉您的主機 +1. 將 SD 卡插入至電腦中 +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. 將 SD 卡插回主機中 +1. 啟動您的主機 + +#### Section II - safecerthax DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. 關閉您的主機 + +#### Section III - safecerthax +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode +1. Press "OK" to accept the update + + There is no update. This is part of the exploit +1. Press "I accept" to accept the terms and conditions + + The update should fail and an error message should appear + + If the update does not fail, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or follow an alternate method, like [Seedminer](seedminer). +1. Press "OK" to close the error message +1. 如果一切成功的話，您將自動進入 SafeB9SInstaller + + If the console freezes or crashes, force power off the console, then retry this section + +#### Section IV - Installing boot9strap + +1. 等待所有安全性檢查完畢 +1. 出現提示時，輸入提示的按鍵組合以安裝 boot9strap +1. 過程結束後，按下『A』重啟主機 + +#### Section V - Configuring Luma3DS + +1. 您的主機將會重啟至 Luma3DS 設定選單中 + + 如果黑屏，[請依循本疑難排解之步驟](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. 透過方向鍵及『A』以開啟下列選項： + + **『Show NAND or user string in System Settings』** +1. 按『Start』鍵以存檔並重新啟動系統 + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. 關閉您的主機 + +___ + +### 繼續至[完成安裝](finalizing-setup) +{: .notice--primary} diff --git a/_pages/zh_TW/installing-boot9strap-(soundhax).txt b/_pages/zh_TW/installing-boot9strap-(soundhax).txt index 574f1f3e01..1d2f0e6dc6 100644 --- a/_pages/zh_TW/installing-boot9strap-(soundhax).txt +++ b/_pages/zh_TW/installing-boot9strap-(soundhax).txt @@ -6,25 +6,16 @@ title: "安裝 boot9strap (透過 Soundhax)" ### 必讀事項 -Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions. - -{% capture notice-1 %} - -請注意，卡帶更新只會更新系統的核心組件，像是系統設定、HOME 主選單等。 卡帶更新不會更新『任天堂 3DS 音樂 (Nintendo 3DS Sound)』程式或是線上下載的功能，如軟體和資料轉移、網頁瀏覽器、擦身通信 Mii 廣場、或是電子商店 (eShop)。 - -This means that using a cartridge update from a version containing an older Nintendo 3DS Sound version *(<2.1.0)* to one that introduced a newer Nintendo 3DS Sound version will break Soundhax! 您將會需要透過另一種方式進入 Homebrew Launcher，比如透過[安裝 boot9strap (透過網頁瀏覽器)](installing-boot9strap-(browser)) 或 [安裝 boot9strap (透過 MSET)](installing-boot9strap-(mset))！ -{% endcapture %} - -
{{ notice-1 | markdownify }}
+Soundhax (when combined with universal-otherapp) is compatible with versions 1.0.0 through 11.3.0 in all regions. ### 必備項目 * 最新版的 [Soundhax](http://soundhax.com) *(對應您主機的區域、型號、及版本的檔案)* + + If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) -* 最新版的 [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(選擇對應您韌體版本的 `.bin` 檔案)* +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) ### 操作說明 @@ -33,12 +24,11 @@ This means that using a cartridge update from a version containing an older Nint 1. 關閉您的主機 1. 將 SD 卡插入至電腦中 1. 複製 Soundhax `.m4a` 至 SD 卡的根目錄底下 -1. 複製 pre9otherapp 啟動程式到 SD 卡的根目錄底下，並重新命名其檔名為 `otherapp.bin` -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card -1. 將 `boot.3dsx` 複製到 SD 卡根目錄中 +1. Copy `otherapp.bin` to the root of your SD card +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 -1. 將 SafeB9SInstaller `.zip` 中的 `arm9.bin` 複製到 SD 卡的根目錄 +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card 1. 將 SD 卡插回主機中 1. 啟動您的主機 @@ -55,7 +45,7 @@ This means that using a cartridge update from a version containing an older Nint + 在這情況下，如果直接啟動 Soundhax，這些提示每次都會跳出來；除非您先跳過提示，然後再正常重新啟動播放程式 1. 選擇『/SDCARD』，並播放『<3 nedwill 2016』 + 可能需要嘗試多次 - + 如果當機的話，透過電源按鈕將您的主機強制關機，並再試一次 + + If it freezes, force the console to power off by holding the power button, then try again ![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/zh_TW/installing-boot9strap-(ssloth-browser).txt b/_pages/zh_TW/installing-boot9strap-(ssloth-browser).txt new file mode 100644 index 0000000000..f368e09822 --- /dev/null +++ b/_pages/zh_TW/installing-boot9strap-(ssloth-browser).txt @@ -0,0 +1,83 @@ +--- +title: "Installing boot9strap (SSLoth-Browser)" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +SSLoth allows users on version 11.13.0 and below to bypass the browser version check, allowing use of new-browserhax or old-browserhax, which can then be used in conjunction with universal-otherapp. + +If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version. +{: .notice--warning} + +### 必備項目 + +* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) +* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +#### 第一節 — 準備工作 + +1. 關閉您的主機 +1. 將 SD 卡插入至電腦中 +1. Copy `otherapp.bin` to the root of your SD card and rename it to `arm11code.bin` + + If you do not see the `.bin` extension, do not add it to the end of the filename +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card +1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` +1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `boot9strap` folder on your SD card +1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card +1. 將 SD 卡插回主機中 +1. 啟動您的主機 + +#### Section II - SSLoth +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "No", then click `Detailed Setup` +1. Set both the Primary DNS and Secondary DNS to `054.038.133.070` +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. 關閉您的主機 + +#### Section III - Launching SafeB9SInstaller +1. 啟動您的主機 +1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera + + If you are unable to open the camera, open the Internet Browser and manually type the URL instead (`https://zoogie.github.io/web/nbhax/`) +1. Tap the QR code button and scan [this QR code](http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=https%3A%2F%2Fzoogie.github.io%2Fweb%2Fnbhax&qzone=1&margin=0&size=400x400&ecc=L) + + 如果遇到錯誤的話， [請依循此疑難排解之步驟](troubleshooting#a-browser-based-exploit-is-not-working) + + If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow [Installing boot9strap (Browser)](installing-boot9strap-(browser)). +1. 如果一切成功的話，您將自動進入 SafeB9SInstaller + +#### Section IV - Installing boot9strap + +1. 等待所有安全性檢查完畢 +1. 出現提示時，輸入提示的按鍵組合以安裝 boot9strap +1. 過程結束後，按下『A』重啟主機 + +#### Section V - Configuring Luma3DS + +1. 您的主機將會重啟至 Luma3DS 設定選單中 + + 如果黑屏，[請依循本疑難排解之步驟](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap) +1. 透過方向鍵及『A』以開啟下列選項： + + **『Show NAND or user string in System Settings』** +1. 按『Start』鍵以存檔並重新啟動系統 + +#### Section VI - Restoring default DNS +1. Launch the System Settings application +1. Navigate to `Internet Settings` -> `Connection Settings` +1. Click on your network connection slot and navigate to `Change Settings` -> `Next Page (right arrow)` -> `DNS` +1. Set "Auto-Obtain DNS" to "Yes" +1. Click OK, then click Save +1. When prompted, click "Test" to perform the connection test + + The test should succeed +1. 關閉您的主機 + +___ + +### 繼續至[完成安裝](finalizing-setup) +{: .notice--primary} + + diff --git a/_pages/zh_TW/installing-boot9strap-(usm).txt b/_pages/zh_TW/installing-boot9strap-(usm).txt index c3d0cc076e..2718083d28 100644 --- a/_pages/zh_TW/installing-boot9strap-(usm).txt +++ b/_pages/zh_TW/installing-boot9strap-(usm).txt @@ -4,6 +4,9 @@ title: "Installing boot9strap (USM)" {% include toc title="條目內容" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page. +{: .notice--warning} + ### 必讀事項 In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile. @@ -17,30 +20,31 @@ Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recov These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help. -{: .notice--danger} +{: .notice--warning} ### 必備項目 * 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案 -* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) #### 第一節 — 準備工作 -1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer - + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) +1. If your device is powered on, power off your device +1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer 1. Upload your movable.sed using the "Choose File" option 1. Click "Download unSAFE_MODE-bb3 archive" - + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`) -1. If your console is powered on, power off your console + + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`) 1. 將 SD 卡插入至電腦中 1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card -1. Copy `usm.bin` from the USM archive (`unSAFE_MODE-bb3.zip`) to the root of your SD card -1. 於您的 SD 卡中，移動至 `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` - + 此 `` 字串將與您在 [Seedminer](seedminer) 中所使用的字串一樣 - + If `Nintendo DSiWare` does not exist, create it + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card + + The `` will be the same one that you used in [Seedminer](seedminer) + + The `` is a 32 character long folder inside of the `` + + If `Nintendo DSiWare` does not exist, create it inside of the `` 1. If there are any existing DSiWare backup files (`<8-character-id>.bin`) in this folder, move them to your PC + This will leave you with an empty Nintendo DSiWare folder. Moving the files to your PC ensures you don't delete any intentional backups -1. Copy the `F00D43D5.bin` file from the USM archive (`unSAFE_MODE-bb3.zip`) to the `Nintendo DSiWare` folder +1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder #### Section II - BannerBomb3 @@ -55,14 +59,15 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n #### Section III - unSAFE_MODE -1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) - + Release the buttons after a few seconds. Your console will boot into Safe Mode +1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power) + + Keep holding the buttons until the device boots into Safe Mode 1. Press "OK" to accept the update + There is no update. This is part of the exploit 1. Press "I accept" to accept the terms and conditions 1. The update will eventually fail, with error code `003-1099`. This is intended behaviour 1. When asked "Would you like to configure Internet settings?", select "Yes" 1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` + + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png) 1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration #### 第四節 — 設定 Luma3DS @@ -79,12 +84,10 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n 1. 移動至 `檔案管理 (Data Management)` -> `DSiWare` 1. Click on the SD Card section + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored -1. Power your system off +1. 關閉您的主機 1. 將 SD 卡插入至電腦中 -1. 於您的 SD 卡中，移動至 `Nintendo 3DS` -> `` -> `<32-character-id>` -> `Nintendo DSiWare` - + 此 `` 字串將與您在 [Seedminer](seedminer) 中所使用的字串一樣 +1. Navigate to `Nintendo 3DS` -> `` -> `` -> `Nintendo DSiWare` on your SD card 1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder -1. Continue to Finalizing Setup ___ diff --git a/_pages/zh_TW/legacy-methods.txt b/_pages/zh_TW/legacy-methods.txt index c3f71d9f8d..992ac9d17b 100644 --- a/_pages/zh_TW/legacy-methods.txt +++ b/_pages/zh_TW/legacy-methods.txt @@ -8,7 +8,7 @@ title: "Legacy Methods" There have been multiple improvements and advancements to methods for installing CFW over the last short while. -For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page. +For this reason, it is recommended that you follow [Installing boot9strap (USM)](installing-boot9strap-(usm)) whenever possible. However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first. @@ -18,7 +18,7 @@ If you need help, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp The following exploits make use of one of two DS-mode applications built into the 3DS: DS Internet Settings and DS Download Play. -If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as Pichaxx. +If both DS Internet Settings and DS Download Play fail to work, you will have to repair them with [TWLFix-3DS](https://github.com/MechanicalDragon0687/TWLFix-3DS/releases/) using a homebrew entrypoint, such as PicHaxx. #### DS 網路設定測試 (用於 Fredtool) @@ -38,9 +38,7 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to ___ -1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE - + This method requires working shoulder buttons 1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool + This method is recommended if your shoulder buttons do not work -1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool +1. [PicHaxx](homebrew-launcher-(pichaxx)): Seedminer + PicHaxx + Frogtool + This method is recommended if your DSiWare Management menu crashes \ No newline at end of file diff --git a/_pages/zh_TW/ntrboot.txt b/_pages/zh_TW/ntrboot.txt index 648f6c4be0..7068266904 100644 --- a/_pages/zh_TW/ntrboot.txt +++ b/_pages/zh_TW/ntrboot.txt @@ -17,23 +17,23 @@ title: "ntrboot" | 燒錄卡名稱 | 目前價錢 | 可使用『Time Bomb』嗎？ | 3DS 版本？ | DSi 版本？ | 備註 | |-|-:|:-:|:-:|:-:|-| -| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | -| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | +| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2024 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. | +| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. | | [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 美元 | 否 | <= 4.3.0 | <= 1.4.4 | | | [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. | -| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. | -| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | | -| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 與 2013 年版不相容。 | -| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 與 2013 年版不相容。 | -| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | -| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | | +| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. | +| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.85b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | | +| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 與 2013 年版不相容。 | +| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 與 2013 年版不相容。 | +| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. | +| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | | | **Gateway Blue** | | 否 | 4.1.0 - 4.5.0 | <= 1.4.5 | | -| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | | +| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | | | **R4 3D Revolution** | | 否 | 無 | 無 | | | **R4i Gold 3DS Deluxe "Starter"** | | 否 | 4.1.0 - 4.5.0 | <= 1.4.5 | | | **R4i Ultra** | | 否 | <= 4.3.0 | <= 1.4.5 | | -| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | | -| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | +| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | | +| **R4iSDHC Dual-Core 20XX** | | 4.0b: September 3, 2024 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. | ![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }}) {: .notice--info} diff --git a/_pages/zh_TW/region-changing.txt b/_pages/zh_TW/region-changing.txt index 1564e560cc..5b9c7bd906 100644 --- a/_pages/zh_TW/region-changing.txt +++ b/_pages/zh_TW/region-changing.txt @@ -17,7 +17,7 @@ title: "區碼變更" 本過程將解除您系統與 NNID 間的綁定，因為在改變區域後它們將不再兼容。 NNID 在創建後就會被鎖定至當前主機所在的區域，除非透過[一個非常複雜且進階的流程](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt)，不然 NNID 不能在區域間遷移。 {: .notice--warning} -區碼變更後，只有在**從未使用過電子商店 (eShop) 的 New 3DS** 及 **所有舊型 3DS** 上才能在新的區域中創建一個新的 NNID 並使用電子商店 (eShop)。 已經在原區域使用過電子商店 (eShop) 的 New 3DS 將無法創建新的 NNID 或在新區域中使用電子商店 (eShop)！ +After this process, **you will not be able to access the eShop**. This includes any feature that uses an NNID, such as game updates, purchasing DLC, or online play in certain games. Region changing to your original region will usually not fix this issue. {: .notice--warning} 注意有時候電子商店 (eShop) 還是沒辦法在應該可以使用的主機上使用。 這部分就是任天堂伺服器那邊的問題了，我沒辦法解決。 另外，有時候電子商店 (eShop) 突然會在正常來說不能使用的主機上 (比如說某些 New 3DS 主機) 變得可以使用。 目前原因仍未知。 @@ -55,12 +55,34 @@ title: "區碼變更" 1. 將 `FBI.3dsx` 複製到 SD 卡中的 `/3ds/` 資料夾底下 1. 將 SD 卡插回主機中 -#### 第二節 — 進行 CTRTransfer - +#### Section II - NAND Backup 1. 開機時按住『Start』鍵啟動 GodMode9 1. 當提示重要檔案備份時，按下『A』繼續，並在完畢後按下『A』繼續 1. 當提示修正 RTC 日期及時間時，按『A』繼續並設定日期及時間，再按『A』繼續 + 請注意，若您被提示說要修正 RTC 日期及時間，這表示您得在遵循完下列步驟後進入您的系統設定重新設定時間 +1. 按『Home』鍵以叫出主選單 +1. 選擇『Scripts...』 +1. 選擇『GM9Megascript』 +1. 選擇『Backup Options』 +1. 選擇『SysNAND Backup』 +1. 按 『A』 確認 + + 此過程將花費一些時間 + + 若您遇見錯誤訊息，請確保您的 SD 卡至少有 1.3GB 的剩餘空間。 +1. 按『A』 繼續 +1. 按『B』回到主選單 +1. 選擇『Exit』 +1. 如提示時，按下『A』取消檔案寫入鎖定 +1. 同時按住『R』及『B』以卸除 SD 卡 +1. 將 SD 卡插入至電腦中 +1. 從 SD 卡中的 `/gm9/out/` 資料夾中複製 `__sysnand_###.bin` 及 `essential.exefs` 至電腦中安全的地方 + + 建議備份至各個不同的地方(比如雲端硬碟中) + + 這些備份檔案可於未來您磚機時用來修復系統檔案 +1. 在複製完畢後，從 SD 卡的 `/gm9/out/` 資料夾中刪除 `__sysnand_###.bin` 及 `__sysnand_###.bin.sha` +1. 將 SD 卡插回主機中 + + 如果您的 SD 卡並沒有被偵測到，請同時按住「R」鍵及「B」鍵以重新將其掛載 + +#### Section III - CTRTransfer + 1. 移動至 `[0:] SDCARD` -> `gm9` 1. 選擇 CTRTransfer `.bin`，並按『A』選擇 1. 選擇『CTRNAND options...』 @@ -87,7 +109,7 @@ title: "區碼變更" + 在安裝 B9S + Luma 後系統更新是沒問題的 + 如果過程中出現錯誤，試試到 DNS 設定底下將設定改成『自動 (auto)』 -#### 第三節 — 啟動 FBI 管理器 +#### Section IV - Launching FBI 1. 啟動『下載通信(Download Play)』程式 (如此圖[icon]({{ "/images/download-play-icon.png" | absolute_url }}) 1. 同時按下『L』+『下』+『Select』鍵以啟動 Rosalina 選單 @@ -100,7 +122,7 @@ title: "區碼變更" 1. 啟動『下載通信 (Download Play)』程式 1. 您的主機應該就會啟動 Homebrew Launcher 了 -#### 第四節 — 重新安裝 Tickets +#### Section V - Reinstalling Tickets 如果腳本說沒有找到任何使用者 tickets 且請您跳過本節，那麼請您跳過這一節 {: .notice--info} @@ -120,14 +142,14 @@ title: "區碼變更" + 按『B』以取消 CDN tickets 的安裝 1. 按下『Home』鍵退出 FBI 管理器 -#### 第五節 — 區域設定 +#### Section VI - Region settings 1. 進入系統設定 (System Settings) 1. 進入『其他設定(Other Settings)』、『個人檔案(Profile)』中的『區域設定(Region Settings)』 1. 選擇您想改成的國家 1. 若提示時，州的部分不必設定 -#### 第六節 — 移除 CTRTransfer 鏡像檔 +#### Section VII - Remove CTRTransfer image 1. 開機時按住『Start』鍵啟動 GodMode9 1. 移動至 `[0:] SDCARD` -> `gm9` diff --git a/_pages/zh_TW/restoring-cfw.txt b/_pages/zh_TW/restoring-cfw.txt new file mode 100644 index 0000000000..826e7da76e --- /dev/null +++ b/_pages/zh_TW/restoring-cfw.txt @@ -0,0 +1,34 @@ +--- +title: "Restoring CFW" +--- + +{% include toc title="條目內容" %} + +### 必讀事項 + +This page prepares consoles with an existing modern boot9strap installation for reinstallation of custom firmware applications. It can also be used in the event of a lost or corrupted SD card. + +### 必備項目 +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) + +### 操作說明 + +#### 第一節 — 準備工作 + +1. 將 SD 卡插入至電腦中 +1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card + + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it +1. 將 SD 卡插回主機中 + +#### Section II - Configuring Luma3DS + +1. Turn on your device + * You should now see a Luma3DS configuration menu +1. 透過方向鍵及『A』以開啟下列選項： + * **"Show NAND or user string in System Settings"** +1. 按『Start』鍵以存檔並重新啟動系統 + +___ + +### 繼續至[完成安裝](finalizing-setup) +{: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_TW/seedminer.txt b/_pages/zh_TW/seedminer.txt index edca727db5..dd75cf62dd 100644 --- a/_pages/zh_TW/seedminer.txt +++ b/_pages/zh_TW/seedminer.txt @@ -4,9 +4,12 @@ title: "Seedminer" {% include toc title="條目內容" %} +Seedminer-based methods have been replaced by easier, safer methods. Please return to [Get Started](get-started) unless you have a legitimate reason to follow this page (such as broken shoulder buttons). +{: .notice--warning} + ### 必讀事項 -我們將透過 DSiWare 遊戲應用程式中所存在的一項安全性漏洞自您的裝置中安裝 boot9strap。 +To install boot9strap on your device, we derive your device's unique encryption key. 為達成這點，我們將透過一項稱為 Seedminer 的工具來計算您裝置中所持有的 DSiWare 加密金鑰 (`movable.sed`)。 我們將透過此 DSiWare 加密金鑰解密任一相容的 DSiWare 以植入一項安全性漏洞好讓我們執行任何想要的程式 (漏洞種類視您的主機區域而定)。 @@ -16,21 +19,7 @@ This method uses a powerful graphics card to perform the calculations needed. A ### 操作說明 -#### Section I - Compatibility Test - -While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits. - -There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method. - -#### DSiWare Management Test (used for unSAFE_MODE) - -1. Go to System Settings, then "Data Management", then "DSiWare" -1. If your console does not crash, the test was successful - + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page - + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you -1. Exit to home menu - -#### 第二節 — 準備工作 +#### 第一節 — 準備工作 1. 將 SD 卡插入至電腦中 1. 移動至 SD 卡的 `Nintendo 3DS` 資料夾中 @@ -49,46 +38,46 @@ There are several different methods that build on the Seedminer exploit, so even + 這個資料夾名稱也就是我們所謂的『ID0』 1. 啟動您的主機 1. 開啟您的好友清單 (HOME 主選單中最上方的[橘色笑臉圖示]({{ "/images/friend-list-icon.png" | absolute_url }})) - + 如果您遇到錯誤訊息且從清單中被踢回主選單，那麼您必須先創立一個 Mii，或者您的主機無法連線至任天堂伺服器 (您的主機可能已被封殺或有網路連線之問題) + + If you receive an error and are kicked out of the menu, you either must create a new Mii or your device cannot connect to Nintendo's servers (due to a ban or connection issues) 1. 選擇您的 Mii 個人檔案，並找尋您的好友代碼 -#### 第三節 — Seedminer +#### Section II - Seedminer 1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer + 此網站可自動替您取得 `movable_part1.sed` (透過一台機器操控的 3DS 主機)，並破解您裝置的 DSiWare 加密金鑰 (透過某自願者的電腦運行 Seedminer) - + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/) - + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you + + If the site isn't working, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you 1. 輸入您裝置的好友代碼 (勿含空白或減號) 至『Your friend code (您的好友代碼)』欄位中 1. 輸入您主機的 32 字元辨識碼 (剛請您複製至記事本中的號碼) 至『Your ID0』欄位中 + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section 1. 選擇『Go』 - + 如果此網站自行跳至第四步，請下載您的 `movable.sed` 檔案並移動至下一章節。 + + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section 1. 如提示時，在您的主機中的『好友註冊 (Register Friend)』添加機器人 3DS 的好友代碼 1. 等待網站更新 + 如果遲遲尚未更新，請在刷新頁面前等待個幾分鐘 1. 一旦網站開始處理您裝置的相關訊息，您將可以選擇『Continue (繼續)』或『Do another device (破解其他裝置)』。 點擊綠色的『Continue (繼續)』按鈕 1. 等待執行剩下的程序 - + 這通常是很快的 (1~5分左右)，但在某些情況下可能需要長達半小時。 - + 在等待過程中，您剛所添加的機器 3DS 可能不會在您的 3DS 主機上顯示。 不過只要網站還有在刷新，這就不是個問題。 + + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour + + During this process, the bot you added may not show up on your 3DS. As long as the website updates, this is not an issue + 若您等了半小時遲遲沒有結果，那麼請加入[Nintendo Homebrew Discord 伺服器](https://discord.gg/MWxPgEp)使用英文來請求幫助 1. 當該程序結束時下載您的 `movable.sed` 檔案 + 您在待會還會用到該檔案，請先將其保留 ___ -#### Seedminer + unSAFE_MODE +#### PicHaxx + universal-otherapp (Recommended) -This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units. +This method of using Seedminer for further exploitation uses your `movable.sed` file to write a custom save file for Pokémon Picross, which can then be used in conjunction with universal-otherapp to install custom firmware. -This method is compatible with all regions, though the CHN region is not covered by this guide. +This route requires the Pokémon Picross application (free on eShop), and thus requires eShop access and a 3DS with a region of USA, EUR, or JPN. -Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm)) +Continue to [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) {: .notice--primary} -___ +#### BannerBomb3 + Fredtool -#### Legacy Methods +This method of using Seedminer for further exploitation uses your `movable.sed` file to create a custom DSiWare backup that exploits the system to dump system DSiWare. -These methods are outdated and not recommended unless otherwise indicated. +This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route. -[Legacy Methods](legacy-methods) +Continue to [BannerBomb3](bannerbomb3) +{: .notice--warning} diff --git a/_pages/zh_TW/site-navigation.txt b/_pages/zh_TW/site-navigation.txt index 27baa97ab1..ef750d9938 100644 --- a/_pages/zh_TW/site-navigation.txt +++ b/_pages/zh_TW/site-navigation.txt @@ -8,9 +8,10 @@ sitemap: false **熱門** + [完成安裝](finalizing-setup) -+ [Homebrew Launcher (透過 Soundhax)](homebrew-launcher-(soundhax)) -+ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) ++ [安裝 boot9strap (透過 Soundhax)](installing-boot9strap-(soundhax)) ++ **New 3DS**: [Installing boot9strap (Browser)](installing-boot9strap-(browser)) ++ **Old 3DS**: [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + {% endcapture %}
{{ notice-1 | markdownify }}
@@ -21,8 +22,8 @@ sitemap: false + [BannerBomb3](bannerbomb3) + [卡帶更新](cart-update) + [製作群](credits) ++ [Checking for CFW](checking-for-cfw) + [CTRTransfer](ctrtransfer) -+ [DSiWare Dumper](dsidumper) + [贊助](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) @@ -33,15 +34,18 @@ sitemap: false + [寫入 ntrboot 漏洞 (透過多台 3DS 系統)](flashing-ntrboot-(3ds-multi-system)) + [寫入 ntrboot 漏洞 (透過 DSi)](flashing-ntrboot-(dsi)) + [寫入 ntrboot 漏洞 (透過 NDS)](flashing-ntrboot-(nds)) ++ [Formatting SD (Linux)](formatting-sd-(linux)) ++ [Formatting SD (Mac)](formatting-sd-(mac)) ++ [Formatting SD (Windows)](formatting-sd-(windows)) + [新手入門](get-started) ++ [Get Started (New 3DS)](get-started-(new-3ds)) ++ [Get Started (Old 3DS)](get-started-(old-3ds)) + [GodMode9 用法](godmode9-usage) + [H2testw (Windows)](h2testw-(windows)) + [首頁](/zh_TW/) + [Homebrew Launcher (透過其他方法)](homebrew-launcher-(alternatives)) -+ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020)) + [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx)) + [Homebrew Launcher (透過 Soundhax)](homebrew-launcher-(soundhax)) -+ [安裝 Homebrew Launcher (透過 Steelhax)](homebrew-launcher-(steelhax)) + [安裝 boot9strap (透過 2xrsa)](installing-boot9strap-(2xrsa)) + [安裝 boot9strap (透過網頁瀏覽器)](installing-boot9strap-(browser)) + [安裝 boot9strap (透過 Fredtool)](installing-boot9strap-(fredtool)) @@ -49,15 +53,17 @@ sitemap: false + [安裝 boot9strap (透過硬改)](installing-boot9strap-(hardmod)) + [安裝 boot9strap (透過 MSET)](installing-boot9strap-(mset)) + [安裝 boot9strap (透過 ntrboot)](installing-boot9strap-(ntrboot)) ++ [Installing boot9strap (PicHaxx)](installing-boot9strap-(pichaxx)) + [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller)) ++ [Installing boot9strap (safecerthax)](installing-boot9strap-(safecerthax)) + [安裝 boot9strap (透過 Soundhax)](installing-boot9strap-(soundhax)) -+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm)) -+ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm)) ++ [Installing boot9strap (SSLoth-Browser)](installing-boot9strap-(ssloth-browser)) ++ [Installing boot9strap (USM)](installing-boot9strap-(usm)) + [移植 EmuNAND](move-emunand) + [ntrboot](ntrboot) + [區碼變更](region-changing) ++ [Restoring CFW](restoring-cfw) + [Seedminer](seedminer) -+ [Legacy Seedminer Methods](legacy-methods) + [疑難排解](troubleshooting) + [卸載自製韌體](uninstall-cfw) + [更新 B9S](updating-b9s) diff --git a/_pages/zh_TW/updating-b9s.txt b/_pages/zh_TW/updating-b9s.txt index 7f52adfa91..1ff3f0847d 100644 --- a/_pages/zh_TW/updating-b9s.txt +++ b/_pages/zh_TW/updating-b9s.txt @@ -8,28 +8,14 @@ title: "更新 B9S" # 本頁面適用於已安裝 boot9strap 且想將其更新至最新版的使用者。 -{% capture notice-1 %} -近日有許多的自製韌體用戶已經被任天堂封殺，幾乎所有的線上功能都被禁止使用。 為了自保，請在遵循本教學前進行以下防護措施： - -1. 進入『系統設定 (System Settings)』、『網路設定 (Internet Settings)』、『SpotPass』、『回傳系統訊息 (Sending of System Information)』 -1. 禁用『回傳系統訊息 (Sending of System Information)』 -1. 退出系統設定 -1. 開啟您的好友清單 (HOME 主選單中最上方的[橘色笑臉圖示]({{ "/images/friend-list-icon.png" | absolute_url }})) - + 如果您遇到錯誤訊息且從清單中被踢回主選單，那麼可能您已將好友清單設定關閉或您的主機無法連線至任天堂伺服器 (您可能已被封殺或網路連線之問題) -1. 進入好友選單設定、『好友提示設定 (Friend Notification Settings)』、『顯示正在遊玩的遊戲 (Show friends what you're playing)』 -1. 禁用『顯示正在遊玩的遊戲 (Show friends what you're playing)』 -1. 退出好友清單 - -{% endcapture %} - -
{{ notice-1 | markdownify }}
+While we believe that custom firmware is safe for online use, there have been online network bans in the past, primarily for cheating and suspicious eShop behavior. +{: .notice--warning} ### 必備項目 * 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) -* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)* -* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) -* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) +* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)* +* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) ### 操作說明 @@ -39,7 +25,6 @@ title: "更新 B9S" # {: .notice--info} 1. 將 SD 卡插入至電腦中 -1. 將 `boot.3dsx` 複製到 SD 卡根目錄中 1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap` 1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中 1. 解壓 SafeB9SInstaller`.zip` 中的 `SafeB9SInstaller.firm` 到 SD 中的 `/luma/payloads/` 下 @@ -58,7 +43,7 @@ title: "更新 B9S" # 1. 關閉您的主機 1. 將 SD 卡插入至電腦中 -1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file +1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file 1. 將 SD 卡插回主機中 1. 啟動您的主機 diff --git a/assets/js/_main.js b/assets/js/_main.js index 074f5ed3ad..03743a5957 100644 --- a/assets/js/_main.js +++ b/assets/js/_main.js @@ -114,7 +114,7 @@ $(document).ready(function(){ var sidebar_hidden_pages = ["404", "a9lh-to-b9s", "credits", "donations", "f3-(linux)", "f3x-(mac)", "faq", "file-extensions-(windows)", "get-started", "godmode9-usage", "h2testw-(windows)", "region-changing", "site-navigation", "troubleshooting", "uninstall-cfw", - "updating-b9s", "why-ads", "privacy-policy"]; + "updating-b9s", "why-ads", "privacy-policy", "checking-for-cfw"]; for(var i = 0; i < sidebar_hidden_pages.length; i++){ if(window.location.href.indexOf(sidebar_hidden_pages[i]) > -1) { @@ -122,6 +122,15 @@ $(document).ready(function(){ } } + var devices = { + "get-started-(old-3ds)": "0", + "get-started-(new-3ds)": "1", + }; + + // The pages used to lookup which route to display + // parsed from the location of the url + // the value is the key to the displayed route in the device_common/old/new variable below + // var methods = { "installing-boot9strap-(2xrsa)": "0", "installing-boot9strap-(mset)": "1", @@ -134,16 +143,22 @@ $(document).ready(function(){ "flashing-ntrboot-(3ds-multi-system)": "10", "flashing-ntrboot-(dsi)": "11", "flashing-ntrboot-(nds)": "12", - "flashing-ntrboot-(powersaves)": "13", "installing-boot9strap-(hardmod)": "14", "seedminer": "15", - "homebrew-launcher-(steelhax)": "16", "installing-boot9strap-(fredtool)": "17", "bannerbomb3": "18", "homebrew-launcher-(pichaxx)": "19", "installing-boot9strap-(usm)": "20", - "installing-boot9strap-(hbl-usm)": "21", - }; + "installing-boot9strap-(safecerthax)": "22", + "installing-boot9strap-(ssloth-browser)": "23", + "installing-boot9strap-(pichaxx)": "24", +}; + + for(var device in devices){ + if(window.location.href.indexOf("/" + device) > -1) { + localStorage.setItem('device', devices[device]); + } + } for(var method in methods){ if(window.location.href.indexOf("/" + method) > -1) { @@ -151,14 +166,21 @@ $(document).ready(function(){ } } - var method; - if(!(method = localStorage.getItem('method'))){ + var device, method; + if(!((device = localStorage.getItem('device')) && (method = localStorage.getItem('method')))){ sidebar_shown = false; } if(sidebar_shown){ var unhide = []; - var route = { + + // Common paths for navigation. Added to both routes. + // These values of the array will be mapped to the _data/navigation/country_lang.yml files + // be sure to add the relevent values to it, in the order of display. (finalizing setup last, for instance) + // + // The key/propery name must match the value associated with the page in the methods variable above + // + var device_common = { "0": ["installing-boot9strap-(2xrsa)", "finalizing-setup"], "1": ["installing-boot9strap-(mset)", "finalizing-setup"], "2": ["installing-boot9strap-(browser)", "finalizing-setup"], @@ -170,20 +192,38 @@ $(document).ready(function(){ "10": ["ntrboot", "flashing-ntrboot-(3ds-multi-system)", "installing-boot9strap-(ntrboot)", "finalizing-setup"], "11": ["ntrboot", "flashing-ntrboot-(dsi)", "installing-boot9strap-(ntrboot)", "finalizing-setup"], "12": ["ntrboot", "flashing-ntrboot-(nds)", "installing-boot9strap-(ntrboot)", "finalizing-setup"], - "13": ["ntrboot", "flashing-ntrboot-(powersaves)", "installing-boot9strap-(ntrboot)", "finalizing-setup"], "14": ["installing-boot9strap-(hardmod)", "finalizing-setup"], "15": ["seedminer", "multiple-options", "finalizing-setup"], - "16": ["seedminer", "homebrew-launcher-(steelhax)", "installing-boot9strap-(frogtool)", "finalizing-setup"], "17": ["seedminer", "multiple-options", "installing-boot9strap-(fredtool)", "finalizing-setup"], "18": ["seedminer", "bannerbomb3", "installing-boot9strap-(fredtool)", "finalizing-setup"], "19": ["seedminer", "homebrew-launcher-(pichaxx)", "installing-boot9strap-(frogtool)", "finalizing-setup"], "20": ["seedminer", "installing-boot9strap-(usm)", "finalizing-setup"], - "21": ["homebrew-launcher-(browserhax-2020)", "installing-boot9strap-(hbl-usm)", "finalizing-setup"], - }; - unhide = unhide.concat(route[method]); + "22": ["installing-boot9strap-(safecerthax)", "finalizing-setup"], + "23": ["installing-boot9strap-(ssloth-browser)", "finalizing-setup"], + "24": ["seedminer", "installing-boot9strap-(pichaxx)", "finalizing-setup"], + + } + // Can add custom routing if necessary but currently both routes are identical + var device_old = Object.assign({}, device_common,{ + // custom routing here + // example: "24": ["seedminer", "multiple-options", "installing-boot9strap-(pichaxx)", "finalizing-setup"], + }); + var device_new = Object.assign({}, device_common,{ + // custom routing here + }); + var route = { + "0": device_old, + "1": device_new, + } + unhide = unhide.concat(route[device][method]); if(typeof unhide !== 'undefined' && unhide.length > 0){ unhide.push("home"); unhide.push("get-started"); + if(device == "0"){ + unhide.push("get-started-(old-3ds)"); + } else if (device == "1"){ + unhide.push("get-started-(new-3ds)"); + } var ol = $('.sidebar.sticky .nav__list .nav__items ol'); for (var i = 0; i < unhide.length; i++){ ol.children('li[data-name="' + unhide[i] + '"]').css("display", ""); @@ -192,10 +232,10 @@ $(document).ready(function(){ var link = $(li).find("a").attr('href'); var name = $(li).attr('data-name'); if((window.location.href.endsWith(link) || - window.location.href.endsWith(link + "/") || - window.location.href.indexOf(link + "#") > -1 || - window.location.href.indexOf(link + ".html") > -1) - && name !== "home"){ + window.location.href.endsWith(link + "/") || + window.location.href.indexOf(link + "#") > -1 || + window.location.href.indexOf(link + ".html") > -1) + && name !== "home"){ $(li).addClass("active"); return false; } @@ -206,4 +246,4 @@ $(document).ready(function(){ } } } -}); +}); \ No newline at end of file diff --git a/assets/js/main.min.js b/assets/js/main.min.js index bc4a5255e0..38e0d19d08 100644 --- a/assets/js/main.min.js +++ b/assets/js/main.min.js @@ -1,9 +1,9 @@ /*! * Minimal Mistakes Jekyll Theme 4.6.0 by Michael Rose - * Copyright 2019 Michael Rose - mademistakes.com | @mmistakes + * Copyright 2021 Michael Rose - mademistakes.com | @mmistakes * Licensed under MIT */ -!function(e,t){"use strict";"object"==typeof module&&"object"==typeof module.exports?module.exports=e.document?t(e,!0):function(e){if(!e.document)throw new Error("jQuery requires a window with a document");return t(e)}:t(e)}("undefined"!=typeof window?window:this,function(e,t){"use strict";function n(e,t){t=t||ne;var n=t.createElement("script");n.text=e,t.head.appendChild(n).parentNode.removeChild(n)}function r(e){var t=!!e&&"length"in e&&e.length,n=me.type(e);return"function"!==n&&!me.isWindow(e)&&("array"===n||0===t||"number"==typeof t&&t>0&&t-1 in e)}function i(e,t){return e.nodeName&&e.nodeName.toLowerCase()===t.toLowerCase()}function o(e,t,n){return me.isFunction(t)?me.grep(e,function(e,r){return!!t.call(e,r,e)!==n}):t.nodeType?me.grep(e,function(e){return e===t!==n}):"string"!=typeof t?me.grep(e,function(e){return se.call(t,e)>-1!==n}):Se.test(t)?me.filter(t,e,n):(t=me.filter(t,e),me.grep(e,function(e){return se.call(t,e)>-1!==n&&1===e.nodeType}))}function a(e,t){for(;(e=e[t])&&1!==e.nodeType;);return e}function s(e){var t={};return me.each(e.match(Ie)||[],function(e,n){t[n]=!0}),t}function l(e){return e}function u(e){throw e}function c(e,t,n,r){var i;try{e&&me.isFunction(i=e.promise)?i.call(e).done(t).fail(n):e&&me.isFunction(i=e.then)?i.call(e,t,n):t.apply(void 0,[e].slice(r))}catch(e){n.apply(void 0,[e])}}function f(){ne.removeEventListener("DOMContentLoaded",f),e.removeEventListener("load",f),me.ready()}function d(){this.expando=me.expando+d.uid++}function p(e){return"true"===e||"false"!==e&&("null"===e?null:e===+e+""?+e:Fe.test(e)?JSON.parse(e):e)}function h(e,t,n){var r;if(void 0===n&&1===e.nodeType)if(r="data-"+t.replace(Me,"-$&").toLowerCase(),"string"==typeof(n=e.getAttribute(r))){try{n=p(n)}catch(e){}He.set(e,t,n)}else n=void 0;return n}function m(e,t,n,r){var i,o=1,a=20,s=r?function(){return r.cur()}:function(){return me.css(e,t,"")},l=s(),u=n&&n[3]||(me.cssNumber[t]?"":"px"),c=(me.cssNumber[t]||"px"!==u&&+l)&&_e.exec(me.css(e,t));if(c&&c[3]!==u){u=u||c[3],n=n||[],c=+l||1;do{o=o||".5",c/=o,me.style(e,t,c+u)}while(o!==(o=s()/l)&&1!==o&&--a)}return n&&(c=+c||+l||0,i=n[1]?c+(n[1]+1)*n[2]:+n[2],r&&(r.unit=u,r.start=c,r.end=i)),i}function g(e){var t,n=e.ownerDocument,r=e.nodeName,i=We[r];return i||(t=n.body.appendChild(n.createElement(r)),i=me.css(t,"display"),t.parentNode.removeChild(t),"none"===i&&(i="block"),We[r]=i,i)}function v(e,t){for(var n,r,i=[],o=0,a=e.length;o-1)i&&i.push(o);else if(u=me.contains(o.ownerDocument,o),a=y(f.appendChild(o),"script"),u&&b(a),n)for(c=0;o=a[c++];)Ve.test(o.type||"")&&n.push(o);return f}function w(){return!0}function C(){return!1}function T(){try{return ne.activeElement}catch(e){}}function k(e,t,n,r,i,o){var a,s;if("object"==typeof t){"string"!=typeof n&&(r=r||n,n=void 0);for(s in t)k(e,s,n,r,t[s],o);return e}if(null==r&&null==i?(i=n,r=n=void 0):null==i&&("string"==typeof n?(i=r,r=void 0):(i=r,r=n,n=void 0)),!1===i)i=C;else if(!i)return e;return 1===o&&(a=i,i=function(e){return me().off(e),a.apply(this,arguments)},i.guid=a.guid||(a.guid=me.guid++)),e.each(function(){me.event.add(this,t,i,r,n)})}function S(e,t){return i(e,"table")&&i(11!==t.nodeType?t:t.firstChild,"tr")?me(">tbody",e)[0]||e:e}function E(e){return e.type=(null!==e.getAttribute("type"))+"/"+e.type,e}function j(e){var t=rt.exec(e.type);return t?e.type=t[1]:e.removeAttribute("type"),e}function N(e,t){var n,r,i,o,a,s,l,u;if(1===t.nodeType){if(qe.hasData(e)&&(o=qe.access(e),a=qe.set(t,o),u=o.events)){delete a.handle,a.events={};for(i in u)for(n=0,r=u[i].length;n1&&"string"==typeof h&&!pe.checkClone&&nt.test(h))return e.each(function(n){var o=e.eq(n);m&&(t[0]=h.call(this,n,o.html())),I(o,t,r,i)});if(d&&(o=x(t,e[0].ownerDocument,!1,e,i),a=o.firstChild,1===o.childNodes.length&&(o=a),a||i)){for(s=me.map(y(o,"script"),E),l=s.length;f=0&&nw.cacheLength&&delete e[t.shift()],e[n+" "]=r}var t=[];return e}function r(e){return e[M]=!0,e}function i(e){var t=D.createElement("fieldset");try{return!!e(t)}catch(e){return!1}finally{t.parentNode&&t.parentNode.removeChild(t),t=null}}function o(e,t){for(var n=e.split("|"),r=n.length;r--;)w.attrHandle[n[r]]=t}function a(e,t){var n=t&&e,r=n&&1===e.nodeType&&1===t.nodeType&&e.sourceIndex-t.sourceIndex;if(r)return r;if(n)for(;n=n.nextSibling;)if(n===t)return-1;return e?1:-1}function s(e){return function(t){return"form"in t?t.parentNode&&!1===t.disabled?"label"in t?"label"in t.parentNode?t.parentNode.disabled===e:t.disabled===e:t.isDisabled===e||t.isDisabled!==!e&&Ce(t)===e:t.disabled===e:"label"in t&&t.disabled===e}}function l(e){return r(function(t){return t=+t,r(function(n,r){for(var i,o=e([],n.length,t),a=o.length;a--;)n[i=o[a]]&&(n[i]=!(r[i]=n[i]))})})}function u(e){return e&&void 0!==e.getElementsByTagName&&e}function c(){}function f(e){for(var t=0,n=e.length,r="";t1?function(t,n,r){for(var i=e.length;i--;)if(!e[i](t,n,r))return!1;return!0}:e[0]}function h(e,n,r){for(var i=0,o=n.length;i-1&&(r[u]=!(a[u]=f))}}else b=m(b===a?b.splice(g,b.length):b),o?o(null,a,b,l):Z.apply(a,b)})}function v(e){for(var t,n,r,i=e.length,o=w.relative[e[0].type],a=o||w.relative[" "],s=o?1:0,l=d(function(e){return e===t},a,!0),u=d(function(e){return Q(t,e)>-1},a,!0),c=[function(e,n,r){var i=!o&&(r||n!==j)||((t=n).nodeType?l(e,n,r):u(e,n,r));return t=null,i}];s1&&p(c),s>1&&f(e.slice(0,s-1).concat({value:" "===e[s-2].type?"*":""})).replace(oe,"$1"),n,s0,o=e.length>0,a=function(r,a,s,l,u){var c,f,d,p=0,h="0",g=r&&[],v=[],y=j,b=r||o&&w.find.TAG("*",u),x=_+=null==y?1:Math.random()||.1,C=b.length;for(u&&(j=a===D||a||u);h!==C&&null!=(c=b[h]);h++){if(o&&c){for(f=0,a||c.ownerDocument===D||(I(c),s=!O);d=e[f++];)if(d(c,a||D,s)){l.push(c);break}u&&(_=x)}i&&((c=!d&&c)&&p--,r&&g.push(c))}if(p+=h,i&&h!==p){for(f=0;d=n[f++];)d(g,v,a,s);if(r){if(p>0)for(;h--;)g[h]||v[h]||(v[h]=Y.call(l));v=m(v)}Z.apply(l,v),u&&!r&&v.length>0&&p+n.length>1&&t.uniqueSort(l)}return u&&(_=x,j=y),g};return i?r(a):a}var b,x,w,C,T,k,S,E,j,N,A,I,D,L,O,P,q,H,F,M="sizzle"+1*new Date,$=e.document,_=0,z=0,B=n(),R=n(),W=n(),U=function(e,t){return e===t&&(A=!0),0},X={}.hasOwnProperty,V=[],Y=V.pop,G=V.push,Z=V.push,K=V.slice,Q=function(e,t){for(var n=0,r=e.length;n+~]|"+ee+")"+ee+"*"),le=new RegExp("="+ee+"*([^\\]'\"]*?)"+ee+"*\\]","g"),ue=new RegExp(re),ce=new RegExp("^"+te+"$"),fe={ID:new RegExp("^#("+te+")"),CLASS:new RegExp("^\\.("+te+")"),TAG:new RegExp("^("+te+"|[*])"),ATTR:new RegExp("^"+ne),PSEUDO:new RegExp("^"+re),CHILD:new RegExp("^:(only|first|last|nth|nth-last)-(child|of-type)(?:\\("+ee+"*(even|odd|(([+-]|)(\\d*)n|)"+ee+"*(?:([+-]|)"+ee+"*(\\d+)|))"+ee+"*\\)|)","i"),bool:new RegExp("^(?:"+J+")$","i"),needsContext:new RegExp("^"+ee+"*[>+~]|:(even|odd|eq|gt|lt|nth|first|last)(?:\\("+ee+"*((?:-\\d)?\\d*)"+ee+"*\\)|)(?=[^-]|$)","i")},de=/^(?:input|select|textarea|button)$/i,pe=/^h\d$/i,he=/^[^{]+\{\s*\[native \w/,me=/^(?:#([\w-]+)|(\w+)|\.([\w-]+))$/,ge=/[+~]/,ve=new RegExp("\\\\([\\da-f]{1,6}"+ee+"?|("+ee+")|.)","ig"),ye=function(e,t,n){var r="0x"+t-65536;return r!==r||n?t:r<0?String.fromCharCode(r+65536):String.fromCharCode(r>>10|55296,1023&r|56320)},be=/([\0-\x1f\x7f]|^-?\d)|^-$|[^\0-\x1f\x7f-\uFFFF\w-]/g,xe=function(e,t){return t?"\0"===e?"�":e.slice(0,-1)+"\\"+e.charCodeAt(e.length-1).toString(16)+" ":"\\"+e},we=function(){I()},Ce=d(function(e){return!0===e.disabled&&("form"in e||"label"in e)},{dir:"parentNode",next:"legend"});try{Z.apply(V=K.call($.childNodes),$.childNodes),V[$.childNodes.length].nodeType}catch(e){Z={apply:V.length?function(e,t){G.apply(e,K.call(t))}:function(e,t){for(var n=e.length,r=0;e[n++]=t[r++];);e.length=n-1}}}x=t.support={},T=t.isXML=function(e){var t=e&&(e.ownerDocument||e).documentElement;return!!t&&"HTML"!==t.nodeName},I=t.setDocument=function(e){var t,n,r=e?e.ownerDocument||e:$;return r!==D&&9===r.nodeType&&r.documentElement?(D=r,L=D.documentElement,O=!T(D),$!==D&&(n=D.defaultView)&&n.top!==n&&(n.addEventListener?n.addEventListener("unload",we,!1):n.attachEvent&&n.attachEvent("onunload",we)),x.attributes=i(function(e){return e.className="i",!e.getAttribute("className")}),x.getElementsByTagName=i(function(e){return e.appendChild(D.createComment("")),!e.getElementsByTagName("*").length}),x.getElementsByClassName=he.test(D.getElementsByClassName),x.getById=i(function(e){return L.appendChild(e).id=M,!D.getElementsByName||!D.getElementsByName(M).length}),x.getById?(w.filter.ID=function(e){var t=e.replace(ve,ye);return function(e){return e.getAttribute("id")===t}},w.find.ID=function(e,t){if(void 0!==t.getElementById&&O){var n=t.getElementById(e);return n?[n]:[]}}):(w.filter.ID=function(e){var t=e.replace(ve,ye);return function(e){var n=void 0!==e.getAttributeNode&&e.getAttributeNode("id");return n&&n.value===t}},w.find.ID=function(e,t){if(void 0!==t.getElementById&&O){var n,r,i,o=t.getElementById(e);if(o){if((n=o.getAttributeNode("id"))&&n.value===e)return[o];for(i=t.getElementsByName(e),r=0;o=i[r++];)if((n=o.getAttributeNode("id"))&&n.value===e)return[o]}return[]}}),w.find.TAG=x.getElementsByTagName?function(e,t){return void 0!==t.getElementsByTagName?t.getElementsByTagName(e):x.qsa?t.querySelectorAll(e):void 0}:function(e,t){var n,r=[],i=0,o=t.getElementsByTagName(e);if("*"===e){for(;n=o[i++];)1===n.nodeType&&r.push(n);return r}return o},w.find.CLASS=x.getElementsByClassName&&function(e,t){if(void 0!==t.getElementsByClassName&&O)return t.getElementsByClassName(e)},q=[],P=[],(x.qsa=he.test(D.querySelectorAll))&&(i(function(e){L.appendChild(e).innerHTML="",e.querySelectorAll("[msallowcapture^='']").length&&P.push("[*^$]="+ee+"*(?:''|\"\")"),e.querySelectorAll("[selected]").length||P.push("\\["+ee+"*(?:value|"+J+")"),e.querySelectorAll("[id~="+M+"-]").length||P.push("~="),e.querySelectorAll(":checked").length||P.push(":checked"),e.querySelectorAll("a#"+M+"+*").length||P.push(".#.+[+~]")}),i(function(e){e.innerHTML="";var t=D.createElement("input");t.setAttribute("type","hidden"),e.appendChild(t).setAttribute("name","D"),e.querySelectorAll("[name=d]").length&&P.push("name"+ee+"*[*^$|!~]?="),2!==e.querySelectorAll(":enabled").length&&P.push(":enabled",":disabled"),L.appendChild(e).disabled=!0,2!==e.querySelectorAll(":disabled").length&&P.push(":enabled",":disabled"),e.querySelectorAll("*,:x"),P.push(",.*:")})),(x.matchesSelector=he.test(H=L.matches||L.webkitMatchesSelector||L.mozMatchesSelector||L.oMatchesSelector||L.msMatchesSelector))&&i(function(e){x.disconnectedMatch=H.call(e,"*"),H.call(e,"[s!='']:x"),q.push("!=",re)}),P=P.length&&new RegExp(P.join("|")),q=q.length&&new RegExp(q.join("|")),t=he.test(L.compareDocumentPosition),F=t||he.test(L.contains)?function(e,t){var n=9===e.nodeType?e.documentElement:e,r=t&&t.parentNode;return e===r||!(!r||1!==r.nodeType||!(n.contains?n.contains(r):e.compareDocumentPosition&&16&e.compareDocumentPosition(r)))}:function(e,t){if(t)for(;t=t.parentNode;)if(t===e)return!0;return!1},U=t?function(e,t){if(e===t)return A=!0,0;var n=!e.compareDocumentPosition-!t.compareDocumentPosition;return n||(n=(e.ownerDocument||e)===(t.ownerDocument||t)?e.compareDocumentPosition(t):1,1&n||!x.sortDetached&&t.compareDocumentPosition(e)===n?e===D||e.ownerDocument===$&&F($,e)?-1:t===D||t.ownerDocument===$&&F($,t)?1:N?Q(N,e)-Q(N,t):0:4&n?-1:1)}:function(e,t){if(e===t)return A=!0,0;var n,r=0,i=e.parentNode,o=t.parentNode,s=[e],l=[t];if(!i||!o)return e===D?-1:t===D?1:i?-1:o?1:N?Q(N,e)-Q(N,t):0;if(i===o)return a(e,t);for(n=e;n=n.parentNode;)s.unshift(n);for(n=t;n=n.parentNode;)l.unshift(n);for(;s[r]===l[r];)r++;return r?a(s[r],l[r]):s[r]===$?-1:l[r]===$?1:0},D):D},t.matches=function(e,n){return t(e,null,null,n)},t.matchesSelector=function(e,n){if((e.ownerDocument||e)!==D&&I(e),n=n.replace(le,"='$1']"),x.matchesSelector&&O&&!W[n+" "]&&(!q||!q.test(n))&&(!P||!P.test(n)))try{var r=H.call(e,n);if(r||x.disconnectedMatch||e.document&&11!==e.document.nodeType)return r}catch(e){}return t(n,D,null,[e]).length>0},t.contains=function(e,t){return(e.ownerDocument||e)!==D&&I(e),F(e,t)},t.attr=function(e,t){(e.ownerDocument||e)!==D&&I(e);var n=w.attrHandle[t.toLowerCase()],r=n&&X.call(w.attrHandle,t.toLowerCase())?n(e,t,!O):void 0;return void 0!==r?r:x.attributes||!O?e.getAttribute(t):(r=e.getAttributeNode(t))&&r.specified?r.value:null},t.escape=function(e){return(e+"").replace(be,xe)},t.error=function(e){throw new Error("Syntax error, unrecognized expression: "+e)},t.uniqueSort=function(e){var t,n=[],r=0,i=0;if(A=!x.detectDuplicates,N=!x.sortStable&&e.slice(0),e.sort(U),A){for(;t=e[i++];)t===e[i]&&(r=n.push(i));for(;r--;)e.splice(n[r],1)}return N=null,e},C=t.getText=function(e){var t,n="",r=0,i=e.nodeType;if(i){if(1===i||9===i||11===i){if("string"==typeof e.textContent)return e.textContent;for(e=e.firstChild;e;e=e.nextSibling)n+=C(e)}else if(3===i||4===i)return e.nodeValue}else for(;t=e[r++];)n+=C(t);return n},w=t.selectors={cacheLength:50,createPseudo:r,match:fe,attrHandle:{},find:{},relative:{">":{dir:"parentNode",first:!0}," ":{dir:"parentNode"},"+":{dir:"previousSibling",first:!0},"~":{dir:"previousSibling"}},preFilter:{ATTR:function(e){return e[1]=e[1].replace(ve,ye),e[3]=(e[3]||e[4]||e[5]||"").replace(ve,ye),"~="===e[2]&&(e[3]=" "+e[3]+" "),e.slice(0,4)},CHILD:function(e){return e[1]=e[1].toLowerCase(),"nth"===e[1].slice(0,3)?(e[3]||t.error(e[0]),e[4]=+(e[4]?e[5]+(e[6]||1):2*("even"===e[3]||"odd"===e[3])),e[5]=+(e[7]+e[8]||"odd"===e[3])):e[3]&&t.error(e[0]),e},PSEUDO:function(e){var t,n=!e[6]&&e[2];return fe.CHILD.test(e[0])?null:(e[3]?e[2]=e[4]||e[5]||"":n&&ue.test(n)&&(t=k(n,!0))&&(t=n.indexOf(")",n.length-t)-n.length)&&(e[0]=e[0].slice(0,t),e[2]=n.slice(0,t)),e.slice(0,3))}},filter:{TAG:function(e){var t=e.replace(ve,ye).toLowerCase();return"*"===e?function(){return!0}:function(e){return e.nodeName&&e.nodeName.toLowerCase()===t}},CLASS:function(e){var t=B[e+" "];return t||(t=new RegExp("(^|"+ee+")"+e+"("+ee+"|$)"))&&B(e,function(e){return t.test("string"==typeof e.className&&e.className||void 0!==e.getAttribute&&e.getAttribute("class")||"")})},ATTR:function(e,n,r){return function(i){var o=t.attr(i,e);return null==o?"!="===n:!n||(o+="","="===n?o===r:"!="===n?o!==r:"^="===n?r&&0===o.indexOf(r):"*="===n?r&&o.indexOf(r)>-1:"$="===n?r&&o.slice(-r.length)===r:"~="===n?(" "+o.replace(ie," ")+" ").indexOf(r)>-1:"|="===n&&(o===r||o.slice(0,r.length+1)===r+"-"))}},CHILD:function(e,t,n,r,i){var o="nth"!==e.slice(0,3),a="last"!==e.slice(-4),s="of-type"===t;return 1===r&&0===i?function(e){return!!e.parentNode}:function(t,n,l){var u,c,f,d,p,h,m=o!==a?"nextSibling":"previousSibling",g=t.parentNode,v=s&&t.nodeName.toLowerCase(),y=!l&&!s,b=!1;if(g){if(o){for(;m;){for(d=t;d=d[m];)if(s?d.nodeName.toLowerCase()===v:1===d.nodeType)return!1;h=m="only"===e&&!h&&"nextSibling"}return!0}if(h=[a?g.firstChild:g.lastChild],a&&y){for(d=g,f=d[M]||(d[M]={}),c=f[d.uniqueID]||(f[d.uniqueID]={}),u=c[e]||[],p=u[0]===_&&u[1],b=p&&u[2],d=p&&g.childNodes[p];d=++p&&d&&d[m]||(b=p=0)||h.pop();)if(1===d.nodeType&&++b&&d===t){c[e]=[_,p,b];break}}else if(y&&(d=t,f=d[M]||(d[M]={}),c=f[d.uniqueID]||(f[d.uniqueID]={}),u=c[e]||[],p=u[0]===_&&u[1],b=p),!1===b)for(;(d=++p&&d&&d[m]||(b=p=0)||h.pop())&&((s?d.nodeName.toLowerCase()!==v:1!==d.nodeType)||!++b||(y&&(f=d[M]||(d[M]={}),c=f[d.uniqueID]||(f[d.uniqueID]={}),c[e]=[_,b]),d!==t)););return(b-=i)===r||b%r==0&&b/r>=0}}},PSEUDO:function(e,n){var i,o=w.pseudos[e]||w.setFilters[e.toLowerCase()]||t.error("unsupported pseudo: "+e);return o[M]?o(n):o.length>1?(i=[e,e,"",n],w.setFilters.hasOwnProperty(e.toLowerCase())?r(function(e,t){for(var r,i=o(e,n),a=i.length;a--;)r=Q(e,i[a]),e[r]=!(t[r]=i[a])}):function(e){return o(e,0,i)}):o}},pseudos:{not:r(function(e){var t=[],n=[],i=S(e.replace(oe,"$1"));return i[M]?r(function(e,t,n,r){for(var o,a=i(e,null,r,[]),s=e.length;s--;)(o=a[s])&&(e[s]=!(t[s]=o))}):function(e,r,o){return t[0]=e,i(t,null,o,n),t[0]=null,!n.pop()}}),has:r(function(e){return function(n){return t(e,n).length>0}}),contains:r(function(e){return e=e.replace(ve,ye),function(t){return(t.textContent||t.innerText||C(t)).indexOf(e)>-1}}),lang:r(function(e){return ce.test(e||"")||t.error("unsupported lang: "+e),e=e.replace(ve,ye).toLowerCase(),function(t){var n;do{if(n=O?t.lang:t.getAttribute("xml:lang")||t.getAttribute("lang"))return(n=n.toLowerCase())===e||0===n.indexOf(e+"-")}while((t=t.parentNode)&&1===t.nodeType);return!1}}),target:function(t){var n=e.location&&e.location.hash;return n&&n.slice(1)===t.id},root:function(e){return e===L},focus:function(e){return e===D.activeElement&&(!D.hasFocus||D.hasFocus())&&!!(e.type||e.href||~e.tabIndex)},enabled:s(!1),disabled:s(!0),checked:function(e){var t=e.nodeName.toLowerCase() -;return"input"===t&&!!e.checked||"option"===t&&!!e.selected},selected:function(e){return e.parentNode&&e.parentNode.selectedIndex,!0===e.selected},empty:function(e){for(e=e.firstChild;e;e=e.nextSibling)if(e.nodeType<6)return!1;return!0},parent:function(e){return!w.pseudos.empty(e)},header:function(e){return pe.test(e.nodeName)},input:function(e){return de.test(e.nodeName)},button:function(e){var t=e.nodeName.toLowerCase();return"input"===t&&"button"===e.type||"button"===t},text:function(e){var t;return"input"===e.nodeName.toLowerCase()&&"text"===e.type&&(null==(t=e.getAttribute("type"))||"text"===t.toLowerCase())},first:l(function(){return[0]}),last:l(function(e,t){return[t-1]}),eq:l(function(e,t,n){return[n<0?n+t:n]}),even:l(function(e,t){for(var n=0;n=0;)e.push(r);return e}),gt:l(function(e,t,n){for(var r=n<0?n+t:n;++r2&&"ID"===(a=o[0]).type&&9===t.nodeType&&O&&w.relative[o[1].type]){if(!(t=(w.find.ID(a.matches[0].replace(ve,ye),t)||[])[0]))return n;c&&(t=t.parentNode),e=e.slice(o.shift().value.length)}for(i=fe.needsContext.test(e)?0:o.length;i--&&(a=o[i],!w.relative[s=a.type]);)if((l=w.find[s])&&(r=l(a.matches[0].replace(ve,ye),ge.test(o[0].type)&&u(t.parentNode)||t))){if(o.splice(i,1),!(e=r.length&&f(o)))return Z.apply(n,r),n;break}}return(c||S(e,d))(r,t,!O,n,!t||ge.test(e)&&u(t.parentNode)||t),n},x.sortStable=M.split("").sort(U).join("")===M,x.detectDuplicates=!!A,I(),x.sortDetached=i(function(e){return 1&e.compareDocumentPosition(D.createElement("fieldset"))}),i(function(e){return e.innerHTML="","#"===e.firstChild.getAttribute("href")})||o("type|href|height|width",function(e,t,n){if(!n)return e.getAttribute(t,"type"===t.toLowerCase()?1:2)}),x.attributes&&i(function(e){return e.innerHTML="",e.firstChild.setAttribute("value",""),""===e.firstChild.getAttribute("value")})||o("value",function(e,t,n){if(!n&&"input"===e.nodeName.toLowerCase())return e.defaultValue}),i(function(e){return null==e.getAttribute("disabled")})||o(J,function(e,t,n){var r;if(!n)return!0===e[t]?t.toLowerCase():(r=e.getAttributeNode(t))&&r.specified?r.value:null}),t}(e);me.find=xe,me.expr=xe.selectors,me.expr[":"]=me.expr.pseudos,me.uniqueSort=me.unique=xe.uniqueSort,me.text=xe.getText,me.isXMLDoc=xe.isXML,me.contains=xe.contains,me.escapeSelector=xe.escape;var we=function(e,t,n){for(var r=[],i=void 0!==n;(e=e[t])&&9!==e.nodeType;)if(1===e.nodeType){if(i&&me(e).is(n))break;r.push(e)}return r},Ce=function(e,t){for(var n=[];e;e=e.nextSibling)1===e.nodeType&&e!==t&&n.push(e);return n},Te=me.expr.match.needsContext,ke=/^<([a-z][^\/\0>:\x20\t\r\n\f]*)[\x20\t\r\n\f]*\/?>(?:<\/\1>|)$/i,Se=/^.[^:#\[\.,]*$/;me.filter=function(e,t,n){var r=t[0];return n&&(e=":not("+e+")"),1===t.length&&1===r.nodeType?me.find.matchesSelector(r,e)?[r]:[]:me.find.matches(e,me.grep(t,function(e){return 1===e.nodeType}))},me.fn.extend({find:function(e){var t,n,r=this.length,i=this;if("string"!=typeof e)return this.pushStack(me(e).filter(function(){for(t=0;t1?me.uniqueSort(n):n},filter:function(e){return this.pushStack(o(this,e||[],!1))},not:function(e){return this.pushStack(o(this,e||[],!0))},is:function(e){return!!o(this,"string"==typeof e&&Te.test(e)?me(e):e||[],!1).length}});var Ee,je=/^(?:\s*(<[\w\W]+>)[^>]*|#([\w-]+))$/;(me.fn.init=function(e,t,n){var r,i;if(!e)return this;if(n=n||Ee,"string"==typeof e){if(!(r="<"===e[0]&&">"===e[e.length-1]&&e.length>=3?[null,e,null]:je.exec(e))||!r[1]&&t)return!t||t.jquery?(t||n).find(e):this.constructor(t).find(e);if(r[1]){if(t=t instanceof me?t[0]:t,me.merge(this,me.parseHTML(r[1],t&&t.nodeType?t.ownerDocument||t:ne,!0)),ke.test(r[1])&&me.isPlainObject(t))for(r in t)me.isFunction(this[r])?this[r](t[r]):this.attr(r,t[r]);return this}return i=ne.getElementById(r[2]),i&&(this[0]=i,this.length=1),this}return e.nodeType?(this[0]=e,this.length=1,this):me.isFunction(e)?void 0!==n.ready?n.ready(e):e(me):me.makeArray(e,this)}).prototype=me.fn,Ee=me(ne);var Ne=/^(?:parents|prev(?:Until|All))/,Ae={children:!0,contents:!0,next:!0,prev:!0};me.fn.extend({has:function(e){var t=me(e,this),n=t.length;return this.filter(function(){for(var e=0;e-1:1===n.nodeType&&me.find.matchesSelector(n,e))){o.push(n);break}return this.pushStack(o.length>1?me.uniqueSort(o):o)},index:function(e){return e?"string"==typeof e?se.call(me(e),this[0]):se.call(this,e.jquery?e[0]:e):this[0]&&this[0].parentNode?this.first().prevAll().length:-1},add:function(e,t){return this.pushStack(me.uniqueSort(me.merge(this.get(),me(e,t))))},addBack:function(e){return this.add(null==e?this.prevObject:this.prevObject.filter(e))}}),me.each({parent:function(e){var t=e.parentNode;return t&&11!==t.nodeType?t:null},parents:function(e){return we(e,"parentNode")},parentsUntil:function(e,t,n){return we(e,"parentNode",n)},next:function(e){return a(e,"nextSibling")},prev:function(e){return a(e,"previousSibling")},nextAll:function(e){return we(e,"nextSibling")},prevAll:function(e){return we(e,"previousSibling")},nextUntil:function(e,t,n){return we(e,"nextSibling",n)},prevUntil:function(e,t,n){return we(e,"previousSibling",n)},siblings:function(e){return Ce((e.parentNode||{}).firstChild,e)},children:function(e){return Ce(e.firstChild)},contents:function(e){return i(e,"iframe")?e.contentDocument:(i(e,"template")&&(e=e.content||e),me.merge([],e.childNodes))}},function(e,t){me.fn[e]=function(n,r){var i=me.map(this,t,n);return"Until"!==e.slice(-5)&&(r=n),r&&"string"==typeof r&&(i=me.filter(r,i)),this.length>1&&(Ae[e]||me.uniqueSort(i),Ne.test(e)&&i.reverse()),this.pushStack(i)}});var Ie=/[^\x20\t\r\n\f]+/g;me.Callbacks=function(e){e="string"==typeof e?s(e):me.extend({},e);var t,n,r,i,o=[],a=[],l=-1,u=function(){for(i=i||e.once,r=t=!0;a.length;l=-1)for(n=a.shift();++l-1;)o.splice(n,1),n<=l&&l--}),this},has:function(e){return e?me.inArray(e,o)>-1:o.length>0},empty:function(){return o&&(o=[]),this},disable:function(){return i=a=[],o=n="",this},disabled:function(){return!o},lock:function(){return i=a=[],n||t||(o=n=""),this},locked:function(){return!!i},fireWith:function(e,n){return i||(n=n||[],n=[e,n.slice?n.slice():n],a.push(n),t||u()),this},fire:function(){return c.fireWith(this,arguments),this},fired:function(){return!!r}};return c},me.extend({Deferred:function(t){var n=[["notify","progress",me.Callbacks("memory"),me.Callbacks("memory"),2],["resolve","done",me.Callbacks("once memory"),me.Callbacks("once memory"),0,"resolved"],["reject","fail",me.Callbacks("once memory"),me.Callbacks("once memory"),1,"rejected"]],r="pending",i={state:function(){return r},always:function(){return o.done(arguments).fail(arguments),this},catch:function(e){return i.then(null,e)},pipe:function(){var e=arguments;return me.Deferred(function(t){me.each(n,function(n,r){var i=me.isFunction(e[r[4]])&&e[r[4]];o[r[1]](function(){var e=i&&i.apply(this,arguments);e&&me.isFunction(e.promise)?e.promise().progress(t.notify).done(t.resolve).fail(t.reject):t[r[0]+"With"](this,i?[e]:arguments)})}),e=null}).promise()},then:function(t,r,i){function o(t,n,r,i){return function(){var s=this,c=arguments,f=function(){var e,f;if(!(t=a&&(r!==u&&(s=void 0,c=[e]),n.rejectWith(s,c))}};t?d():(me.Deferred.getStackHook&&(d.stackTrace=me.Deferred.getStackHook()),e.setTimeout(d))}}var a=0;return me.Deferred(function(e){n[0][3].add(o(0,e,me.isFunction(i)?i:l,e.notifyWith)),n[1][3].add(o(0,e,me.isFunction(t)?t:l)),n[2][3].add(o(0,e,me.isFunction(r)?r:u))}).promise()},promise:function(e){return null!=e?me.extend(e,i):i}},o={};return me.each(n,function(e,t){var a=t[2],s=t[5];i[t[1]]=a.add,s&&a.add(function(){r=s},n[3-e][2].disable,n[0][2].lock),a.add(t[3].fire),o[t[0]]=function(){return o[t[0]+"With"](this===o?void 0:this,arguments),this},o[t[0]+"With"]=a.fireWith}),i.promise(o),t&&t.call(o,o),o},when:function(e){var t=arguments.length,n=t,r=Array(n),i=ie.call(arguments),o=me.Deferred(),a=function(e){return function(n){r[e]=this,i[e]=arguments.length>1?ie.call(arguments):n,--t||o.resolveWith(r,i)}};if(t<=1&&(c(e,o.done(a(n)).resolve,o.reject,!t),"pending"===o.state()||me.isFunction(i[n]&&i[n].then)))return o.then();for(;n--;)c(i[n],a(n),o.reject);return o.promise()}});var De=/^(Eval|Internal|Range|Reference|Syntax|Type|URI)Error$/;me.Deferred.exceptionHook=function(t,n){e.console&&e.console.warn&&t&&De.test(t.name)&&e.console.warn("jQuery.Deferred exception: "+t.message,t.stack,n)},me.readyException=function(t){e.setTimeout(function(){throw t})};var Le=me.Deferred();me.fn.ready=function(e){return Le.then(e).catch(function(e){me.readyException(e)}),this},me.extend({isReady:!1,readyWait:1,ready:function(e){(!0===e?--me.readyWait:me.isReady)||(me.isReady=!0,!0!==e&&--me.readyWait>0||Le.resolveWith(ne,[me]))}}),me.ready.then=Le.then,"complete"===ne.readyState||"loading"!==ne.readyState&&!ne.documentElement.doScroll?e.setTimeout(me.ready):(ne.addEventListener("DOMContentLoaded",f),e.addEventListener("load",f));var Oe=function(e,t,n,r,i,o,a){var s=0,l=e.length,u=null==n;if("object"===me.type(n)){i=!0;for(s in n)Oe(e,t,s,n[s],!0,o,a)}else if(void 0!==r&&(i=!0,me.isFunction(r)||(a=!0),u&&(a?(t.call(e,r),t=null):(u=t,t=function(e,t,n){return u.call(me(e),n)})),t))for(;s1,null,!0)},removeData:function(e){return this.each(function(){He.remove(this,e)})}}),me.extend({queue:function(e,t,n){var r;if(e)return t=(t||"fx")+"queue",r=qe.get(e,t),n&&(!r||Array.isArray(n)?r=qe.access(e,t,me.makeArray(n)):r.push(n)),r||[]},dequeue:function(e,t){t=t||"fx";var n=me.queue(e,t),r=n.length,i=n.shift(),o=me._queueHooks(e,t),a=function(){me.dequeue(e,t)};"inprogress"===i&&(i=n.shift(),r--),i&&("fx"===t&&n.unshift("inprogress"),delete o.stop,i.call(e,a,o)),!r&&o&&o.empty.fire()},_queueHooks:function(e,t){var n=t+"queueHooks";return qe.get(e,n)||qe.access(e,n,{empty:me.Callbacks("once memory").add(function(){qe.remove(e,[t+"queue",n])})})}}),me.fn.extend({queue:function(e,t){var n=2;return"string"!=typeof e&&(t=e,e="fx",n--),arguments.length\x20\t\r\n\f]+)/i,Ve=/^$|\/(?:java|ecma)script/i,Ye={option:[1,""],thead:[1,"","
"],col:[2,"","
"],tr:[2,"","
"],td:[3,"","
"],_default:[0,"",""]};Ye.optgroup=Ye.option,Ye.tbody=Ye.tfoot=Ye.colgroup=Ye.caption=Ye.thead,Ye.th=Ye.td;var Ge=/<|&#?\w+;/;!function(){var e=ne.createDocumentFragment(),t=e.appendChild(ne.createElement("div")),n=ne.createElement("input");n.setAttribute("type","radio"),n.setAttribute("checked","checked"),n.setAttribute("name","t"),t.appendChild(n),pe.checkClone=t.cloneNode(!0).cloneNode(!0).lastChild.checked,t.innerHTML="",pe.noCloneChecked=!!t.cloneNode(!0).lastChild.defaultValue}();var Ze=ne.documentElement,Ke=/^key/,Qe=/^(?:mouse|pointer|contextmenu|drag|drop)|click/,Je=/^([^.]*)(?:\.(.+)|)/;me.event={global:{},add:function(e,t,n,r,i){var o,a,s,l,u,c,f,d,p,h,m,g=qe.get(e);if(g)for(n.handler&&(o=n,n=o.handler,i=o.selector),i&&me.find.matchesSelector(Ze,i),n.guid||(n.guid=me.guid++),(l=g.events)||(l=g.events={}),(a=g.handle)||(a=g.handle=function(t){return void 0!==me&&me.event.triggered!==t.type?me.event.dispatch.apply(e,arguments):void 0}),t=(t||"").match(Ie)||[""],u=t.length;u--;)s=Je.exec(t[u])||[],p=m=s[1],h=(s[2]||"").split(".").sort(),p&&(f=me.event.special[p]||{},p=(i?f.delegateType:f.bindType)||p,f=me.event.special[p]||{},c=me.extend({type:p,origType:m,data:r,handler:n,guid:n.guid,selector:i,needsContext:i&&me.expr.match.needsContext.test(i),namespace:h.join(".")},o),(d=l[p])||(d=l[p]=[],d.delegateCount=0,f.setup&&!1!==f.setup.call(e,r,h,a)||e.addEventListener&&e.addEventListener(p,a)),f.add&&(f.add.call(e,c),c.handler.guid||(c.handler.guid=n.guid)),i?d.splice(d.delegateCount++,0,c):d.push(c),me.event.global[p]=!0)},remove:function(e,t,n,r,i){var o,a,s,l,u,c,f,d,p,h,m,g=qe.hasData(e)&&qe.get(e);if(g&&(l=g.events)){for(t=(t||"").match(Ie)||[""],u=t.length;u--;)if(s=Je.exec(t[u])||[],p=m=s[1],h=(s[2]||"").split(".").sort(),p){for(f=me.event.special[p]||{},p=(r?f.delegateType:f.bindType)||p,d=l[p]||[],s=s[2]&&new RegExp("(^|\\.)"+h.join("\\.(?:.*\\.|)")+"(\\.|$)"),a=o=d.length;o--;)c=d[o],!i&&m!==c.origType||n&&n.guid!==c.guid||s&&!s.test(c.namespace)||r&&r!==c.selector&&("**"!==r||!c.selector)||(d.splice(o,1),c.selector&&d.delegateCount--,f.remove&&f.remove.call(e,c));a&&!d.length&&(f.teardown&&!1!==f.teardown.call(e,h,g.handle)||me.removeEvent(e,p,g.handle),delete l[p])}else for(p in l)me.event.remove(e,p+t[u],n,r,!0);me.isEmptyObject(l)&&qe.remove(e,"handle events")}},dispatch:function(e){var t,n,r,i,o,a,s=me.event.fix(e),l=new Array(arguments.length),u=(qe.get(this,"events")||{})[s.type]||[],c=me.event.special[s.type]||{};for(l[0]=s,t=1;t=1))for(;u!==this;u=u.parentNode||this)if(1===u.nodeType&&("click"!==e.type||!0!==u.disabled)){for(o=[],a={},n=0;n-1:me.find(i,this,null,[u]).length),a[i]&&o.push(r);o.length&&s.push({elem:u,handlers:o})}return u=this,l\x20\t\r\n\f]*)[^>]*)\/>/gi,tt=/\s*$/g;me.extend({htmlPrefilter:function(e){return e.replace(et,"<$1>")},clone:function(e,t,n){var r,i,o,a,s=e.cloneNode(!0),l=me.contains(e.ownerDocument,e);if(!(pe.noCloneChecked||1!==e.nodeType&&11!==e.nodeType||me.isXMLDoc(e)))for(a=y(s),o=y(e),r=0,i=o.length;r0&&b(a,!l&&y(e,"script")),s},cleanData:function(e){for(var t,n,r,i=me.event.special,o=0;void 0!==(n=e[o]);o++)if(Pe(n)){if(t=n[qe.expando]){if(t.events)for(r in t.events)i[r]?me.event.remove(n,r):me.removeEvent(n,r,t.handle);n[qe.expando]=void 0}n[He.expando]&&(n[He.expando]=void 0)}}}),me.fn.extend({detach:function(e){return D(this,e,!0)},remove:function(e){return D(this,e)},text:function(e){return Oe(this,function(e){return void 0===e?me.text(this):this.empty().each(function(){1!==this.nodeType&&11!==this.nodeType&&9!==this.nodeType||(this.textContent=e)})},null,e,arguments.length)},append:function(){return I(this,arguments,function(e){if(1===this.nodeType||11===this.nodeType||9===this.nodeType){S(this,e).appendChild(e)}})},prepend:function(){return I(this,arguments,function(e){if(1===this.nodeType||11===this.nodeType||9===this.nodeType){var t=S(this,e);t.insertBefore(e,t.firstChild)}})},before:function(){return I(this,arguments,function(e){this.parentNode&&this.parentNode.insertBefore(e,this)})},after:function(){return I(this,arguments,function(e){this.parentNode&&this.parentNode.insertBefore(e,this.nextSibling)})},empty:function(){for(var e,t=0;null!=(e=this[t]);t++)1===e.nodeType&&(me.cleanData(y(e,!1)),e.textContent="");return this},clone:function(e,t){return e=null!=e&&e,t=null==t?e:t,this.map(function(){return me.clone(this,e,t)})},html:function(e){return Oe(this,function(e){var t=this[0]||{},n=0,r=this.length;if(void 0===e&&1===t.nodeType)return t.innerHTML;if("string"==typeof e&&!tt.test(e)&&!Ye[(Xe.exec(e)||["",""])[1].toLowerCase()]){e=me.htmlPrefilter(e);try{for(;n1)}}),me.Tween=$,$.prototype={constructor:$,init:function(e,t,n,r,i,o){this.elem=e,this.prop=n,this.easing=i||me.easing._default,this.options=t,this.start=this.now=this.cur(),this.end=r,this.unit=o||(me.cssNumber[n]?"":"px")},cur:function(){var e=$.propHooks[this.prop];return e&&e.get?e.get(this):$.propHooks._default.get(this)},run:function(e){var t,n=$.propHooks[this.prop];return this.options.duration?this.pos=t=me.easing[this.easing](e,this.options.duration*e,0,1,this.options.duration):this.pos=t=e,this.now=(this.end-this.start)*t+this.start,this.options.step&&this.options.step.call(this.elem,this.now,this),n&&n.set?n.set(this):$.propHooks._default.set(this),this}},$.prototype.init.prototype=$.prototype,$.propHooks={_default:{get:function(e){var t;return 1!==e.elem.nodeType||null!=e.elem[e.prop]&&null==e.elem.style[e.prop]?e.elem[e.prop]:(t=me.css(e.elem,e.prop,""),t&&"auto"!==t?t:0)},set:function(e){me.fx.step[e.prop]?me.fx.step[e.prop](e):1!==e.elem.nodeType||null==e.elem.style[me.cssProps[e.prop]]&&!me.cssHooks[e.prop]?e.elem[e.prop]=e.now:me.style(e.elem,e.prop,e.now+e.unit)}}},$.propHooks.scrollTop=$.propHooks.scrollLeft={set:function(e){e.elem.nodeType&&e.elem.parentNode&&(e.elem[e.prop]=e.now)}},me.easing={linear:function(e){return e},swing:function(e){return.5-Math.cos(e*Math.PI)/2},_default:"swing"},me.fx=$.prototype.init,me.fx.step={};var ht,mt,gt=/^(?:toggle|show|hide)$/,vt=/queueHooks$/;me.Animation=me.extend(X,{tweeners:{"*":[function(e,t){var n=this.createTween(e,t);return m(n.elem,e,_e.exec(t),n),n}]},tweener:function(e,t){me.isFunction(e)?(t=e,e=["*"]):e=e.match(Ie);for(var n,r=0,i=e.length;r1)},removeAttr:function(e){return this.each(function(){me.removeAttr(this,e)})}}),me.extend({attr:function(e,t,n){var r,i,o=e.nodeType;if(3!==o&&8!==o&&2!==o)return void 0===e.getAttribute?me.prop(e,t,n):(1===o&&me.isXMLDoc(e)||(i=me.attrHooks[t.toLowerCase()]||(me.expr.match.bool.test(t)?yt:void 0)),void 0!==n?null===n?void me.removeAttr(e,t):i&&"set"in i&&void 0!==(r=i.set(e,n,t))?r:(e.setAttribute(t,n+""),n):i&&"get"in i&&null!==(r=i.get(e,t))?r:(r=me.find.attr(e,t),null==r?void 0:r))},attrHooks:{type:{set:function(e,t){if(!pe.radioValue&&"radio"===t&&i(e,"input")){var n=e.value;return e.setAttribute("type",t),n&&(e.value=n),t}}}},removeAttr:function(e,t){var n,r=0,i=t&&t.match(Ie);if(i&&1===e.nodeType)for(;n=i[r++];)e.removeAttribute(n)}}),yt={set:function(e,t,n){return!1===t?me.removeAttr(e,n):e.setAttribute(n,n),n}},me.each(me.expr.match.bool.source.match(/\w+/g),function(e,t){var n=bt[t]||me.find.attr;bt[t]=function(e,t,r){var i,o,a=t.toLowerCase();return r||(o=bt[a],bt[a]=i,i=null!=n(e,t,r)?a:null,bt[a]=o),i}});var xt=/^(?:input|select|textarea|button)$/i,wt=/^(?:a|area)$/i;me.fn.extend({prop:function(e,t){return Oe(this,me.prop,e,t,arguments.length>1)},removeProp:function(e){return this.each(function(){delete this[me.propFix[e]||e]})}}),me.extend({prop:function(e,t,n){var r,i,o=e.nodeType;if(3!==o&&8!==o&&2!==o)return 1===o&&me.isXMLDoc(e)||(t=me.propFix[t]||t,i=me.propHooks[t]),void 0!==n?i&&"set"in i&&void 0!==(r=i.set(e,n,t))?r:e[t]=n:i&&"get"in i&&null!==(r=i.get(e,t))?r:e[t]},propHooks:{tabIndex:{get:function(e){var t=me.find.attr(e,"tabindex");return t?parseInt(t,10):xt.test(e.nodeName)||wt.test(e.nodeName)&&e.href?0:-1}}},propFix:{for:"htmlFor",class:"className"}}),pe.optSelected||(me.propHooks.selected={get:function(e){var t=e.parentNode;return t&&t.parentNode&&t.parentNode.selectedIndex,null},set:function(e){var t=e.parentNode;t&&(t.selectedIndex,t.parentNode&&t.parentNode.selectedIndex)}}),me.each(["tabIndex","readOnly","maxLength","cellSpacing","cellPadding","rowSpan","colSpan","useMap","frameBorder","contentEditable"],function(){me.propFix[this.toLowerCase()]=this}),me.fn.extend({addClass:function(e){var t,n,r,i,o,a,s,l=0;if(me.isFunction(e))return this.each(function(t){me(this).addClass(e.call(this,t,Y(this)))});if("string"==typeof e&&e)for(t=e.match(Ie)||[];n=this[l++];)if(i=Y(n),r=1===n.nodeType&&" "+V(i)+" "){for(a=0;o=t[a++];)r.indexOf(" "+o+" ")<0&&(r+=o+" ");s=V(r),i!==s&&n.setAttribute("class",s)}return this},removeClass:function(e){var t,n,r,i,o,a,s,l=0;if(me.isFunction(e))return this.each(function(t){me(this).removeClass(e.call(this,t,Y(this)))});if(!arguments.length)return this.attr("class","");if("string"==typeof e&&e)for(t=e.match(Ie)||[];n=this[l++];)if(i=Y(n),r=1===n.nodeType&&" "+V(i)+" "){for(a=0;o=t[a++];)for(;r.indexOf(" "+o+" ")>-1;)r=r.replace(" "+o+" "," ");s=V(r),i!==s&&n.setAttribute("class",s)}return this},toggleClass:function(e,t){var n=typeof e;return"boolean"==typeof t&&"string"===n?t?this.addClass(e):this.removeClass(e):me.isFunction(e)?this.each(function(n){me(this).toggleClass(e.call(this,n,Y(this),t),t)}):this.each(function(){var t,r,i,o;if("string"===n)for(r=0,i=me(this),o=e.match(Ie)||[];t=o[r++];)i.hasClass(t)?i.removeClass(t):i.addClass(t);else void 0!==e&&"boolean"!==n||(t=Y(this),t&&qe.set(this,"__className__",t),this.setAttribute&&this.setAttribute("class",t||!1===e?"":qe.get(this,"__className__")||""))})},hasClass:function(e){var t,n,r=0;for(t=" "+e+" ";n=this[r++];)if(1===n.nodeType&&(" "+V(Y(n))+" ").indexOf(t)>-1)return!0;return!1}});var Ct=/\r/g;me.fn.extend({val:function(e){var t,n,r,i=this[0];return arguments.length?(r=me.isFunction(e),this.each(function(n){var i;1===this.nodeType&&(i=r?e.call(this,n,me(this).val()):e,null==i?i="":"number"==typeof i?i+="":Array.isArray(i)&&(i=me.map(i,function(e){return null==e?"":e+""})),(t=me.valHooks[this.type]||me.valHooks[this.nodeName.toLowerCase()])&&"set"in t&&void 0!==t.set(this,i,"value")||(this.value=i))})):i?(t=me.valHooks[i.type]||me.valHooks[i.nodeName.toLowerCase()],t&&"get"in t&&void 0!==(n=t.get(i,"value"))?n:(n=i.value,"string"==typeof n?n.replace(Ct,""):null==n?"":n)):void 0}}),me.extend({valHooks:{option:{get:function(e){var t=me.find.attr(e,"value");return null!=t?t:V(me.text(e))}},select:{get:function(e){var t,n,r,o=e.options,a=e.selectedIndex,s="select-one"===e.type,l=s?null:[],u=s?a+1:o.length;for(r=a<0?u:s?a:0;r-1)&&(n=!0);return n||(e.selectedIndex=-1),o}}}}),me.each(["radio","checkbox"],function(){me.valHooks[this]={set:function(e,t){if(Array.isArray(t))return e.checked=me.inArray(me(e).val(),t)>-1}},pe.checkOn||(me.valHooks[this].get=function(e){return null===e.getAttribute("value")?"on":e.value})});var Tt=/^(?:focusinfocus|focusoutblur)$/;me.extend(me.event,{trigger:function(t,n,r,i){var o,a,s,l,u,c,f,d=[r||ne],p=ce.call(t,"type")?t.type:t,h=ce.call(t,"namespace")?t.namespace.split("."):[];if(a=s=r=r||ne,3!==r.nodeType&&8!==r.nodeType&&!Tt.test(p+me.event.triggered)&&(p.indexOf(".")>-1&&(h=p.split("."),p=h.shift(),h.sort()),u=p.indexOf(":")<0&&"on"+p,t=t[me.expando]?t:new me.Event(p,"object"==typeof t&&t),t.isTrigger=i?2:3,t.namespace=h.join("."),t.rnamespace=t.namespace?new RegExp("(^|\\.)"+h.join("\\.(?:.*\\.|)")+"(\\.|$)"):null,t.result=void 0,t.target||(t.target=r),n=null==n?[t]:me.makeArray(n,[t]),f=me.event.special[p]||{},i||!f.trigger||!1!==f.trigger.apply(r,n))){if(!i&&!f.noBubble&&!me.isWindow(r)){for(l=f.delegateType||p,Tt.test(l+p)||(a=a.parentNode);a;a=a.parentNode)d.push(a),s=a;s===(r.ownerDocument||ne)&&d.push(s.defaultView||s.parentWindow||e)}for(o=0;(a=d[o++])&&!t.isPropagationStopped();)t.type=o>1?l:f.bindType||p,c=(qe.get(a,"events")||{})[t.type]&&qe.get(a,"handle"),c&&c.apply(a,n),(c=u&&a[u])&&c.apply&&Pe(a)&&(t.result=c.apply(a,n),!1===t.result&&t.preventDefault());return t.type=p,i||t.isDefaultPrevented()||f._default&&!1!==f._default.apply(d.pop(),n)||!Pe(r)||u&&me.isFunction(r[p])&&!me.isWindow(r)&&(s=r[u],s&&(r[u]=null),me.event.triggered=p,r[p](),me.event.triggered=void 0,s&&(r[u]=s)),t.result}},simulate:function(e,t,n){var r=me.extend(new me.Event,n,{type:e,isSimulated:!0});me.event.trigger(r,null,t)}}),me.fn.extend({trigger:function(e,t){return this.each(function(){me.event.trigger(e,t,this)})},triggerHandler:function(e,t){var n=this[0];if(n)return me.event.trigger(e,t,n,!0)}}),me.each("blur focus focusin focusout resize scroll click dblclick mousedown mouseup mousemove mouseover mouseout mouseenter mouseleave change select submit keydown keypress keyup contextmenu".split(" "),function(e,t){me.fn[t]=function(e,n){return arguments.length>0?this.on(t,null,e,n):this.trigger(t)}}),me.fn.extend({hover:function(e,t){return this.mouseenter(e).mouseleave(t||e)}}),pe.focusin="onfocusin"in e,pe.focusin||me.each({focus:"focusin",blur:"focusout"},function(e,t){var n=function(e){me.event.simulate(t,e.target,me.event.fix(e))};me.event.special[t]={setup:function(){var r=this.ownerDocument||this,i=qe.access(r,t);i||r.addEventListener(e,n,!0),qe.access(r,t,(i||0)+1)},teardown:function(){var r=this.ownerDocument||this,i=qe.access(r,t)-1;i?qe.access(r,t,i):(r.removeEventListener(e,n,!0),qe.remove(r,t))}}});var kt=e.location,St=me.now(),Et=/\?/;me.parseXML=function(t){var n;if(!t||"string"!=typeof t)return null;try{n=(new e.DOMParser).parseFromString(t,"text/xml")}catch(e){n=void 0}return n&&!n.getElementsByTagName("parsererror").length||me.error("Invalid XML: "+t),n};var jt=/\[\]$/,Nt=/\r?\n/g,At=/^(?:submit|button|image|reset|file)$/i,It=/^(?:input|select|textarea|keygen)/i;me.param=function(e,t){var n,r=[],i=function(e,t){var n=me.isFunction(t)?t():t;r[r.length]=encodeURIComponent(e)+"="+encodeURIComponent(null==n?"":n)};if(Array.isArray(e)||e.jquery&&!me.isPlainObject(e))me.each(e,function(){i(this.name,this.value)});else for(n in e)G(n,e[n],t,i);return r.join("&")},me.fn.extend({serialize:function(){return me.param(this.serializeArray())},serializeArray:function(){return this.map(function(){var e=me.prop(this,"elements");return e?me.makeArray(e):this}).filter(function(){var e=this.type;return this.name&&!me(this).is(":disabled")&&It.test(this.nodeName)&&!At.test(e)&&(this.checked||!Ue.test(e))}).map(function(e,t){var n=me(this).val();return null==n?null:Array.isArray(n)?me.map(n,function(e){return{name:t.name,value:e.replace(Nt,"\r\n")}}):{name:t.name,value:n.replace(Nt,"\r\n")}}).get()}});var Dt=/%20/g,Lt=/#.*$/,Ot=/([?&])_=[^&]*/,Pt=/^(.*?):[ \t]*([^\r\n]*)$/gm,qt=/^(?:about|app|app-storage|.+-extension|file|res|widget):$/,Ht=/^(?:GET|HEAD)$/,Ft=/^\/\//,Mt={},$t={},_t="*/".concat("*"),zt=ne.createElement("a");zt.href=kt.href,me.extend({active:0,lastModified:{},etag:{},ajaxSettings:{url:kt.href,type:"GET",isLocal:qt.test(kt.protocol),global:!0,processData:!0,async:!0,contentType:"application/x-www-form-urlencoded; charset=UTF-8",accepts:{"*":_t,text:"text/plain",html:"text/html",xml:"application/xml, text/xml",json:"application/json, text/javascript"},contents:{xml:/\bxml\b/,html:/\bhtml/,json:/\bjson\b/},responseFields:{xml:"responseXML",text:"responseText",json:"responseJSON"},converters:{"* text":String,"text html":!0,"text json":JSON.parse,"text xml":me.parseXML},flatOptions:{url:!0,context:!0}},ajaxSetup:function(e,t){return t?Q(Q(e,me.ajaxSettings),t):Q(me.ajaxSettings,e)},ajaxPrefilter:Z(Mt),ajaxTransport:Z($t),ajax:function(t,n){function r(t,n,r,s){var u,d,p,x,w,C=n;c||(c=!0,l&&e.clearTimeout(l),i=void 0,a=s||"",T.readyState=t>0?4:0,u=t>=200&&t<300||304===t,r&&(x=J(h,T,r)),x=ee(h,x,T,u),u?(h.ifModified&&(w=T.getResponseHeader("Last-Modified"),w&&(me.lastModified[o]=w),(w=T.getResponseHeader("etag"))&&(me.etag[o]=w)),204===t||"HEAD"===h.type?C="nocontent":304===t?C="notmodified":(C=x.state,d=x.data,p=x.error,u=!p)):(p=C,!t&&C||(C="error",t<0&&(t=0))),T.status=t,T.statusText=(n||C)+"",u?v.resolveWith(m,[d,C,T]):v.rejectWith(m,[T,C,p]),T.statusCode(b),b=void 0,f&&g.trigger(u?"ajaxSuccess":"ajaxError",[T,h,u?d:p]),y.fireWith(m,[T,C]),f&&(g.trigger("ajaxComplete",[T,h]),--me.active||me.event.trigger("ajaxStop")))}"object"==typeof t&&(n=t,t=void 0),n=n||{};var i,o,a,s,l,u,c,f,d,p,h=me.ajaxSetup({},n),m=h.context||h,g=h.context&&(m.nodeType||m.jquery)?me(m):me.event,v=me.Deferred(),y=me.Callbacks("once memory"),b=h.statusCode||{},x={},w={},C="canceled",T={readyState:0,getResponseHeader:function(e){var t;if(c){if(!s)for(s={};t=Pt.exec(a);)s[t[1].toLowerCase()]=t[2];t=s[e.toLowerCase()]}return null==t?null:t},getAllResponseHeaders:function(){return c?a:null},setRequestHeader:function(e,t){return null==c&&(e=w[e.toLowerCase()]=w[e.toLowerCase()]||e,x[e]=t),this},overrideMimeType:function(e){return null==c&&(h.mimeType=e),this},statusCode:function(e){var t;if(e)if(c)T.always(e[T.status]);else for(t in e)b[t]=[b[t],e[t]];return this},abort:function(e){var t=e||C;return i&&i.abort(t),r(0,t),this}};if(v.promise(T),h.url=((t||h.url||kt.href)+"").replace(Ft,kt.protocol+"//"),h.type=n.method||n.type||h.method||h.type,h.dataTypes=(h.dataType||"*").toLowerCase().match(Ie)||[""],null==h.crossDomain){u=ne.createElement("a");try{u.href=h.url,u.href=u.href,h.crossDomain=zt.protocol+"//"+zt.host!=u.protocol+"//"+u.host}catch(e){h.crossDomain=!0}}if(h.data&&h.processData&&"string"!=typeof h.data&&(h.data=me.param(h.data,h.traditional)),K(Mt,h,n,T),c)return T;f=me.event&&h.global,f&&0==me.active++&&me.event.trigger("ajaxStart"),h.type=h.type.toUpperCase(),h.hasContent=!Ht.test(h.type),o=h.url.replace(Lt,""),h.hasContent?h.data&&h.processData&&0===(h.contentType||"").indexOf("application/x-www-form-urlencoded")&&(h.data=h.data.replace(Dt,"+")):(p=h.url.slice(o.length),h.data&&(o+=(Et.test(o)?"&":"?")+h.data,delete h.data),!1===h.cache&&(o=o.replace(Ot,"$1"),p=(Et.test(o)?"&":"?")+"_="+St+++p),h.url=o+p),h.ifModified&&(me.lastModified[o]&&T.setRequestHeader("If-Modified-Since",me.lastModified[o]),me.etag[o]&&T.setRequestHeader("If-None-Match",me.etag[o])),(h.data&&h.hasContent&&!1!==h.contentType||n.contentType)&&T.setRequestHeader("Content-Type",h.contentType),T.setRequestHeader("Accept",h.dataTypes[0]&&h.accepts[h.dataTypes[0]]?h.accepts[h.dataTypes[0]]+("*"!==h.dataTypes[0]?", "+_t+"; q=0.01":""):h.accepts["*"]);for(d in h.headers)T.setRequestHeader(d,h.headers[d]);if(h.beforeSend&&(!1===h.beforeSend.call(m,T,h)||c))return T.abort();if(C="abort",y.add(h.complete),T.done(h.success),T.fail(h.error),i=K($t,h,n,T)){if(T.readyState=1,f&&g.trigger("ajaxSend",[T,h]),c)return T;h.async&&h.timeout>0&&(l=e.setTimeout(function(){T.abort("timeout")},h.timeout));try{c=!1,i.send(x,r)}catch(e){if(c)throw e;r(-1,e)}}else r(-1,"No Transport");return T},getJSON:function(e,t,n){return me.get(e,t,n,"json")},getScript:function(e,t){return me.get(e,void 0,t,"script")}}),me.each(["get","post"],function(e,t){me[t]=function(e,n,r,i){return me.isFunction(n)&&(i=i||r,r=n,n=void 0),me.ajax(me.extend({url:e,type:t,dataType:i,data:n,success:r},me.isPlainObject(e)&&e))}}),me._evalUrl=function(e){return me.ajax({url:e,type:"GET",dataType:"script",cache:!0,async:!1,global:!1,throws:!0})},me.fn.extend({wrapAll:function(e){var t;return this[0]&&(me.isFunction(e)&&(e=e.call(this[0])),t=me(e,this[0].ownerDocument).eq(0).clone(!0),this[0].parentNode&&t.insertBefore(this[0]),t.map(function(){for(var e=this;e.firstElementChild;)e=e.firstElementChild;return e}).append(this)),this},wrapInner:function(e){return me.isFunction(e)?this.each(function(t){me(this).wrapInner(e.call(this,t))}):this.each(function(){var t=me(this),n=t.contents();n.length?n.wrapAll(e):t.append(e)})},wrap:function(e){var t=me.isFunction(e);return this.each(function(n){me(this).wrapAll(t?e.call(this,n):e)})},unwrap:function(e){return this.parent(e).not("body").each(function(){me(this).replaceWith(this.childNodes)}),this}}),me.expr.pseudos.hidden=function(e){return!me.expr.pseudos.visible(e)},me.expr.pseudos.visible=function(e){return!!(e.offsetWidth||e.offsetHeight||e.getClientRects().length)},me.ajaxSettings.xhr=function(){try{return new e.XMLHttpRequest}catch(e){}};var Bt={0:200,1223:204},Rt=me.ajaxSettings.xhr();pe.cors=!!Rt&&"withCredentials"in Rt,pe.ajax=Rt=!!Rt,me.ajaxTransport(function(t){var n,r;if(pe.cors||Rt&&!t.crossDomain)return{send:function(i,o){var a,s=t.xhr();if(s.open(t.type,t.url,t.async,t.username,t.password),t.xhrFields)for(a in t.xhrFields)s[a]=t.xhrFields[a];t.mimeType&&s.overrideMimeType&&s.overrideMimeType(t.mimeType),t.crossDomain||i["X-Requested-With"]||(i["X-Requested-With"]="XMLHttpRequest");for(a in i)s.setRequestHeader(a,i[a]);n=function(e){return function(){n&&(n=r=s.onload=s.onerror=s.onabort=s.onreadystatechange=null,"abort"===e?s.abort():"error"===e?"number"!=typeof s.status?o(0,"error"):o(s.status,s.statusText):o(Bt[s.status]||s.status,s.statusText,"text"!==(s.responseType||"text")||"string"!=typeof s.responseText?{binary:s.response}:{text:s.responseText},s.getAllResponseHeaders()))}},s.onload=n(),r=s.onerror=n("error"),void 0!==s.onabort?s.onabort=r:s.onreadystatechange=function(){4===s.readyState&&e.setTimeout(function(){n&&r()})},n=n("abort");try{s.send(t.hasContent&&t.data||null)}catch(e){if(n)throw e}},abort:function(){n&&n()}}}),me.ajaxPrefilter(function(e){e.crossDomain&&(e.contents.script=!1)}),me.ajaxSetup({accepts:{script:"text/javascript, application/javascript, application/ecmascript, application/x-ecmascript"},contents:{script:/\b(?:java|ecma)script\b/},converters:{"text script":function(e){return me.globalEval(e),e}}}),me.ajaxPrefilter("script",function(e){void 0===e.cache&&(e.cache=!1),e.crossDomain&&(e.type="GET")}),me.ajaxTransport("script",function(e){if(e.crossDomain){var t,n;return{send:function(r,i){t=me("